12 This framework is designed to provide a generic interface for PHY
13 devices present in the kernel. This layer will have the generic
14 API by which phy drivers can create PHY using the phy framework and
15 phy users can obtain reference to the PHY. All the users of this
16 framework should select this config.
18 config PHY_EXYNOS_MIPI_VIDEO
19 tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
21 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
23 default y if ARCH_S5PV210 || ARCH_EXYNOS
25 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
30 depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD
34 config OMAP_CONTROL_PHY
35 tristate "OMAP CONTROL PHY Driver"
36 depends on ARCH_OMAP2PLUS || COMPILE_TEST
38 Enable this to add support for the PHY part present in the control
39 module. This driver has API to power on the USB2 PHY and to write to
40 the mailbox. The mailbox is present only in omap4 and the register to
41 power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
42 additional register to power on USB3 PHY/SATA PHY/PCIE PHY
46 tristate "OMAP USB2 PHY Driver"
47 depends on ARCH_OMAP2PLUS
50 select OMAP_CONTROL_PHY
51 depends on OMAP_OCP2SCP
53 Enable this to support the transceiver that is part of SOC. This
54 driver takes care of all the PHY functionality apart from comparator.
55 The USB OTG controller communicates with the comparator using this
59 tristate "TI PIPE3 PHY Driver"
60 depends on ARCH_OMAP2PLUS || COMPILE_TEST
62 select OMAP_CONTROL_PHY
63 depends on OMAP_OCP2SCP
65 Enable this to support the PIPE3 PHY that is part of TI SOCs. This
66 driver takes care of all the PHY functionality apart from comparator.
67 This driver interacts with the "OMAP Control PHY Driver" to power
71 tristate "TWL4030 USB Transceiver Driver"
72 depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
76 Enable this to support the USB OTG transceiver on TWL4030
77 family chips (including the TWL5030 and TPS659x0 devices).
78 This transceiver supports high and full speed devices plus,
79 in host mode, low speed.
81 config PHY_EXYNOS_DP_VIDEO
82 tristate "EXYNOS SoC series Display Port PHY driver"
84 depends on ARCH_EXYNOS || COMPILE_TEST
88 Support for Display Port PHY found on Samsung EXYNOS SoCs.
90 config BCM_KONA_USB2_PHY
91 tristate "Broadcom Kona USB2 PHY Driver"
92 depends on GENERIC_PHY
95 Enable this to support the Broadcom Kona USB 2.0 PHY.
97 config PHY_EXYNOS5250_SATA
98 tristate "Exynos5250 Sata SerDes/PHY driver"
99 depends on SOC_EXYNOS5250
107 Enable this to support SATA SerDes/Phy found on Samsung's
108 Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
109 SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
110 port to accept one SATA device.
113 tristate "Allwinner sunxi SoC USB PHY driver"
114 depends on ARCH_SUNXI && HAS_IOMEM && OF
117 Enable this to support the transceiver that is part of Allwinner
120 This driver controls the entire USB PHY block, both the USB OTG
121 parts, as well as the 2 regular USB 2 host PHYs.
123 config PHY_SAMSUNG_USB2
124 tristate "Samsung USB 2.0 PHY driver"
128 Enable this to support the Samsung USB 2.0 PHY driver for Samsung
129 SoCs. This driver provides the interface for USB 2.0 PHY. Support for
130 particular SoCs has to be enabled in addition to this driver. Number
131 and type of supported phys depends on the SoC.
133 config PHY_EXYNOS4210_USB2
134 bool "Support for Exynos 4210"
135 depends on PHY_SAMSUNG_USB2
136 depends on CPU_EXYNOS4210
138 Enable USB PHY support for Exynos 4210. This option requires that
139 Samsung USB 2.0 PHY driver is enabled and means that support for this
140 particular SoC is compiled in the driver. In case of Exynos 4210 four
141 phys are available - device, host, HSIC0 and HSIC1.
143 config PHY_EXYNOS4X12_USB2
144 bool "Support for Exynos 4x12"
145 depends on PHY_SAMSUNG_USB2
146 depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412)
148 Enable USB PHY support for Exynos 4x12. This option requires that
149 Samsung USB 2.0 PHY driver is enabled and means that support for this
150 particular SoC is compiled in the driver. In case of Exynos 4x12 four
151 phys are available - device, host, HSIC0 and HSIC1.
153 config PHY_EXYNOS5250_USB2
154 bool "Support for Exynos 5250"
155 depends on PHY_SAMSUNG_USB2
156 depends on SOC_EXYNOS5250
158 Enable USB PHY support for Exynos 5250. This option requires that
159 Samsung USB 2.0 PHY driver is enabled and means that support for this
160 particular SoC is compiled in the driver. In case of Exynos 5250 four
161 phys are available - device, host, HSIC0 and HSIC.
164 tristate "APM X-Gene 15Gbps PHY support"
165 depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST)
168 This option enables support for APM X-Gene SoC multi-purpose PHY.