2 * core.c -- Voltage/Current Regulator framework.
4 * Copyright 2007, 2008 Wolfson Microelectronics PLC.
5 * Copyright 2008 SlimLogic Ltd.
7 * Author: Liam Girdwood <lrg@slimlogic.co.uk>
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
16 #include <linux/kernel.h>
17 #include <linux/init.h>
18 #include <linux/debugfs.h>
19 #include <linux/device.h>
20 #include <linux/slab.h>
21 #include <linux/async.h>
22 #include <linux/err.h>
23 #include <linux/mutex.h>
24 #include <linux/suspend.h>
25 #include <linux/delay.h>
26 #include <linux/gpio.h>
28 #include <linux/regmap.h>
29 #include <linux/regulator/of_regulator.h>
30 #include <linux/regulator/consumer.h>
31 #include <linux/regulator/driver.h>
32 #include <linux/regulator/machine.h>
33 #include <linux/module.h>
35 #define CREATE_TRACE_POINTS
36 #include <trace/events/regulator.h>
40 #define rdev_crit(rdev, fmt, ...) \
41 pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
42 #define rdev_err(rdev, fmt, ...) \
43 pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
44 #define rdev_warn(rdev, fmt, ...) \
45 pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
46 #define rdev_info(rdev, fmt, ...) \
47 pr_info("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
48 #define rdev_dbg(rdev, fmt, ...) \
49 pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)
51 static DEFINE_MUTEX(regulator_list_mutex);
52 static LIST_HEAD(regulator_list);
53 static LIST_HEAD(regulator_map_list);
54 static bool has_full_constraints;
55 static bool board_wants_dummy_regulator;
57 static struct dentry *debugfs_root;
60 * struct regulator_map
62 * Used to provide symbolic supply names to devices.
64 struct regulator_map {
65 struct list_head list;
66 const char *dev_name; /* The dev_name() for the consumer */
68 struct regulator_dev *regulator;
74 * One for each consumer device.
78 struct list_head list;
79 unsigned int always_on:1;
84 struct device_attribute dev_attr;
85 struct regulator_dev *rdev;
86 struct dentry *debugfs;
89 static int _regulator_is_enabled(struct regulator_dev *rdev);
90 static int _regulator_disable(struct regulator_dev *rdev);
91 static int _regulator_get_voltage(struct regulator_dev *rdev);
92 static int _regulator_get_current_limit(struct regulator_dev *rdev);
93 static unsigned int _regulator_get_mode(struct regulator_dev *rdev);
94 static void _notifier_call_chain(struct regulator_dev *rdev,
95 unsigned long event, void *data);
96 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
97 int min_uV, int max_uV);
98 static struct regulator *create_regulator(struct regulator_dev *rdev,
100 const char *supply_name);
102 static const char *rdev_get_name(struct regulator_dev *rdev)
104 if (rdev->constraints && rdev->constraints->name)
105 return rdev->constraints->name;
106 else if (rdev->desc->name)
107 return rdev->desc->name;
113 * of_get_regulator - get a regulator device node based on supply name
114 * @dev: Device pointer for the consumer (of regulator) device
115 * @supply: regulator supply name
117 * Extract the regulator device node corresponding to the supply name.
118 * retruns the device node corresponding to the regulator if found, else
121 static struct device_node *of_get_regulator(struct device *dev, const char *supply)
123 struct device_node *regnode = NULL;
124 char prop_name[32]; /* 32 is max size of property name */
126 dev_dbg(dev, "Looking up %s-supply from device tree\n", supply);
128 snprintf(prop_name, 32, "%s-supply", supply);
129 regnode = of_parse_phandle(dev->of_node, prop_name, 0);
132 dev_dbg(dev, "Looking up %s property in node %s failed",
133 prop_name, dev->of_node->full_name);
139 static int _regulator_can_change_status(struct regulator_dev *rdev)
141 if (!rdev->constraints)
144 if (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_STATUS)
150 /* Platform voltage constraint check */
151 static int regulator_check_voltage(struct regulator_dev *rdev,
152 int *min_uV, int *max_uV)
154 BUG_ON(*min_uV > *max_uV);
156 if (!rdev->constraints) {
157 rdev_err(rdev, "no constraints\n");
160 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
161 rdev_err(rdev, "operation not allowed\n");
165 if (*max_uV > rdev->constraints->max_uV)
166 *max_uV = rdev->constraints->max_uV;
167 if (*min_uV < rdev->constraints->min_uV)
168 *min_uV = rdev->constraints->min_uV;
170 if (*min_uV > *max_uV) {
171 rdev_err(rdev, "unsupportable voltage range: %d-%duV\n",
179 /* Make sure we select a voltage that suits the needs of all
180 * regulator consumers
182 static int regulator_check_consumers(struct regulator_dev *rdev,
183 int *min_uV, int *max_uV)
185 struct regulator *regulator;
187 list_for_each_entry(regulator, &rdev->consumer_list, list) {
189 * Assume consumers that didn't say anything are OK
190 * with anything in the constraint range.
192 if (!regulator->min_uV && !regulator->max_uV)
195 if (*max_uV > regulator->max_uV)
196 *max_uV = regulator->max_uV;
197 if (*min_uV < regulator->min_uV)
198 *min_uV = regulator->min_uV;
201 if (*min_uV > *max_uV)
207 /* current constraint check */
208 static int regulator_check_current_limit(struct regulator_dev *rdev,
209 int *min_uA, int *max_uA)
211 BUG_ON(*min_uA > *max_uA);
213 if (!rdev->constraints) {
214 rdev_err(rdev, "no constraints\n");
217 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_CURRENT)) {
218 rdev_err(rdev, "operation not allowed\n");
222 if (*max_uA > rdev->constraints->max_uA)
223 *max_uA = rdev->constraints->max_uA;
224 if (*min_uA < rdev->constraints->min_uA)
225 *min_uA = rdev->constraints->min_uA;
227 if (*min_uA > *max_uA) {
228 rdev_err(rdev, "unsupportable current range: %d-%duA\n",
236 /* operating mode constraint check */
237 static int regulator_mode_constrain(struct regulator_dev *rdev, int *mode)
240 case REGULATOR_MODE_FAST:
241 case REGULATOR_MODE_NORMAL:
242 case REGULATOR_MODE_IDLE:
243 case REGULATOR_MODE_STANDBY:
246 rdev_err(rdev, "invalid mode %x specified\n", *mode);
250 if (!rdev->constraints) {
251 rdev_err(rdev, "no constraints\n");
254 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_MODE)) {
255 rdev_err(rdev, "operation not allowed\n");
259 /* The modes are bitmasks, the most power hungry modes having
260 * the lowest values. If the requested mode isn't supported
261 * try higher modes. */
263 if (rdev->constraints->valid_modes_mask & *mode)
271 /* dynamic regulator mode switching constraint check */
272 static int regulator_check_drms(struct regulator_dev *rdev)
274 if (!rdev->constraints) {
275 rdev_err(rdev, "no constraints\n");
278 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS)) {
279 rdev_err(rdev, "operation not allowed\n");
285 static ssize_t regulator_uV_show(struct device *dev,
286 struct device_attribute *attr, char *buf)
288 struct regulator_dev *rdev = dev_get_drvdata(dev);
291 mutex_lock(&rdev->mutex);
292 ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev));
293 mutex_unlock(&rdev->mutex);
297 static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL);
299 static ssize_t regulator_uA_show(struct device *dev,
300 struct device_attribute *attr, char *buf)
302 struct regulator_dev *rdev = dev_get_drvdata(dev);
304 return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
306 static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL);
308 static ssize_t regulator_name_show(struct device *dev,
309 struct device_attribute *attr, char *buf)
311 struct regulator_dev *rdev = dev_get_drvdata(dev);
313 return sprintf(buf, "%s\n", rdev_get_name(rdev));
316 static ssize_t regulator_print_opmode(char *buf, int mode)
319 case REGULATOR_MODE_FAST:
320 return sprintf(buf, "fast\n");
321 case REGULATOR_MODE_NORMAL:
322 return sprintf(buf, "normal\n");
323 case REGULATOR_MODE_IDLE:
324 return sprintf(buf, "idle\n");
325 case REGULATOR_MODE_STANDBY:
326 return sprintf(buf, "standby\n");
328 return sprintf(buf, "unknown\n");
331 static ssize_t regulator_opmode_show(struct device *dev,
332 struct device_attribute *attr, char *buf)
334 struct regulator_dev *rdev = dev_get_drvdata(dev);
336 return regulator_print_opmode(buf, _regulator_get_mode(rdev));
338 static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL);
340 static ssize_t regulator_print_state(char *buf, int state)
343 return sprintf(buf, "enabled\n");
345 return sprintf(buf, "disabled\n");
347 return sprintf(buf, "unknown\n");
350 static ssize_t regulator_state_show(struct device *dev,
351 struct device_attribute *attr, char *buf)
353 struct regulator_dev *rdev = dev_get_drvdata(dev);
356 mutex_lock(&rdev->mutex);
357 ret = regulator_print_state(buf, _regulator_is_enabled(rdev));
358 mutex_unlock(&rdev->mutex);
362 static DEVICE_ATTR(state, 0444, regulator_state_show, NULL);
364 static ssize_t regulator_status_show(struct device *dev,
365 struct device_attribute *attr, char *buf)
367 struct regulator_dev *rdev = dev_get_drvdata(dev);
371 status = rdev->desc->ops->get_status(rdev);
376 case REGULATOR_STATUS_OFF:
379 case REGULATOR_STATUS_ON:
382 case REGULATOR_STATUS_ERROR:
385 case REGULATOR_STATUS_FAST:
388 case REGULATOR_STATUS_NORMAL:
391 case REGULATOR_STATUS_IDLE:
394 case REGULATOR_STATUS_STANDBY:
397 case REGULATOR_STATUS_UNDEFINED:
404 return sprintf(buf, "%s\n", label);
406 static DEVICE_ATTR(status, 0444, regulator_status_show, NULL);
408 static ssize_t regulator_min_uA_show(struct device *dev,
409 struct device_attribute *attr, char *buf)
411 struct regulator_dev *rdev = dev_get_drvdata(dev);
413 if (!rdev->constraints)
414 return sprintf(buf, "constraint not defined\n");
416 return sprintf(buf, "%d\n", rdev->constraints->min_uA);
418 static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL);
420 static ssize_t regulator_max_uA_show(struct device *dev,
421 struct device_attribute *attr, char *buf)
423 struct regulator_dev *rdev = dev_get_drvdata(dev);
425 if (!rdev->constraints)
426 return sprintf(buf, "constraint not defined\n");
428 return sprintf(buf, "%d\n", rdev->constraints->max_uA);
430 static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL);
432 static ssize_t regulator_min_uV_show(struct device *dev,
433 struct device_attribute *attr, char *buf)
435 struct regulator_dev *rdev = dev_get_drvdata(dev);
437 if (!rdev->constraints)
438 return sprintf(buf, "constraint not defined\n");
440 return sprintf(buf, "%d\n", rdev->constraints->min_uV);
442 static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL);
444 static ssize_t regulator_max_uV_show(struct device *dev,
445 struct device_attribute *attr, char *buf)
447 struct regulator_dev *rdev = dev_get_drvdata(dev);
449 if (!rdev->constraints)
450 return sprintf(buf, "constraint not defined\n");
452 return sprintf(buf, "%d\n", rdev->constraints->max_uV);
454 static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL);
456 static ssize_t regulator_total_uA_show(struct device *dev,
457 struct device_attribute *attr, char *buf)
459 struct regulator_dev *rdev = dev_get_drvdata(dev);
460 struct regulator *regulator;
463 mutex_lock(&rdev->mutex);
464 list_for_each_entry(regulator, &rdev->consumer_list, list)
465 uA += regulator->uA_load;
466 mutex_unlock(&rdev->mutex);
467 return sprintf(buf, "%d\n", uA);
469 static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL);
471 static ssize_t regulator_num_users_show(struct device *dev,
472 struct device_attribute *attr, char *buf)
474 struct regulator_dev *rdev = dev_get_drvdata(dev);
475 return sprintf(buf, "%d\n", rdev->use_count);
478 static ssize_t regulator_type_show(struct device *dev,
479 struct device_attribute *attr, char *buf)
481 struct regulator_dev *rdev = dev_get_drvdata(dev);
483 switch (rdev->desc->type) {
484 case REGULATOR_VOLTAGE:
485 return sprintf(buf, "voltage\n");
486 case REGULATOR_CURRENT:
487 return sprintf(buf, "current\n");
489 return sprintf(buf, "unknown\n");
492 static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
493 struct device_attribute *attr, char *buf)
495 struct regulator_dev *rdev = dev_get_drvdata(dev);
497 return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV);
499 static DEVICE_ATTR(suspend_mem_microvolts, 0444,
500 regulator_suspend_mem_uV_show, NULL);
502 static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
503 struct device_attribute *attr, char *buf)
505 struct regulator_dev *rdev = dev_get_drvdata(dev);
507 return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV);
509 static DEVICE_ATTR(suspend_disk_microvolts, 0444,
510 regulator_suspend_disk_uV_show, NULL);
512 static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
513 struct device_attribute *attr, char *buf)
515 struct regulator_dev *rdev = dev_get_drvdata(dev);
517 return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
519 static DEVICE_ATTR(suspend_standby_microvolts, 0444,
520 regulator_suspend_standby_uV_show, NULL);
522 static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
523 struct device_attribute *attr, char *buf)
525 struct regulator_dev *rdev = dev_get_drvdata(dev);
527 return regulator_print_opmode(buf,
528 rdev->constraints->state_mem.mode);
530 static DEVICE_ATTR(suspend_mem_mode, 0444,
531 regulator_suspend_mem_mode_show, NULL);
533 static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
534 struct device_attribute *attr, char *buf)
536 struct regulator_dev *rdev = dev_get_drvdata(dev);
538 return regulator_print_opmode(buf,
539 rdev->constraints->state_disk.mode);
541 static DEVICE_ATTR(suspend_disk_mode, 0444,
542 regulator_suspend_disk_mode_show, NULL);
544 static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
545 struct device_attribute *attr, char *buf)
547 struct regulator_dev *rdev = dev_get_drvdata(dev);
549 return regulator_print_opmode(buf,
550 rdev->constraints->state_standby.mode);
552 static DEVICE_ATTR(suspend_standby_mode, 0444,
553 regulator_suspend_standby_mode_show, NULL);
555 static ssize_t regulator_suspend_mem_state_show(struct device *dev,
556 struct device_attribute *attr, char *buf)
558 struct regulator_dev *rdev = dev_get_drvdata(dev);
560 return regulator_print_state(buf,
561 rdev->constraints->state_mem.enabled);
563 static DEVICE_ATTR(suspend_mem_state, 0444,
564 regulator_suspend_mem_state_show, NULL);
566 static ssize_t regulator_suspend_disk_state_show(struct device *dev,
567 struct device_attribute *attr, char *buf)
569 struct regulator_dev *rdev = dev_get_drvdata(dev);
571 return regulator_print_state(buf,
572 rdev->constraints->state_disk.enabled);
574 static DEVICE_ATTR(suspend_disk_state, 0444,
575 regulator_suspend_disk_state_show, NULL);
577 static ssize_t regulator_suspend_standby_state_show(struct device *dev,
578 struct device_attribute *attr, char *buf)
580 struct regulator_dev *rdev = dev_get_drvdata(dev);
582 return regulator_print_state(buf,
583 rdev->constraints->state_standby.enabled);
585 static DEVICE_ATTR(suspend_standby_state, 0444,
586 regulator_suspend_standby_state_show, NULL);
590 * These are the only attributes are present for all regulators.
591 * Other attributes are a function of regulator functionality.
593 static struct device_attribute regulator_dev_attrs[] = {
594 __ATTR(name, 0444, regulator_name_show, NULL),
595 __ATTR(num_users, 0444, regulator_num_users_show, NULL),
596 __ATTR(type, 0444, regulator_type_show, NULL),
600 static void regulator_dev_release(struct device *dev)
602 struct regulator_dev *rdev = dev_get_drvdata(dev);
606 static struct class regulator_class = {
608 .dev_release = regulator_dev_release,
609 .dev_attrs = regulator_dev_attrs,
612 /* Calculate the new optimum regulator operating mode based on the new total
613 * consumer load. All locks held by caller */
614 static void drms_uA_update(struct regulator_dev *rdev)
616 struct regulator *sibling;
617 int current_uA = 0, output_uV, input_uV, err;
620 err = regulator_check_drms(rdev);
621 if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
622 (!rdev->desc->ops->get_voltage &&
623 !rdev->desc->ops->get_voltage_sel) ||
624 !rdev->desc->ops->set_mode)
627 /* get output voltage */
628 output_uV = _regulator_get_voltage(rdev);
632 /* get input voltage */
635 input_uV = regulator_get_voltage(rdev->supply);
637 input_uV = rdev->constraints->input_uV;
641 /* calc total requested load */
642 list_for_each_entry(sibling, &rdev->consumer_list, list)
643 current_uA += sibling->uA_load;
645 /* now get the optimum mode for our new total regulator load */
646 mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
647 output_uV, current_uA);
649 /* check the new mode is allowed */
650 err = regulator_mode_constrain(rdev, &mode);
652 rdev->desc->ops->set_mode(rdev, mode);
655 static int suspend_set_state(struct regulator_dev *rdev,
656 struct regulator_state *rstate)
660 /* If we have no suspend mode configration don't set anything;
661 * only warn if the driver implements set_suspend_voltage or
662 * set_suspend_mode callback.
664 if (!rstate->enabled && !rstate->disabled) {
665 if (rdev->desc->ops->set_suspend_voltage ||
666 rdev->desc->ops->set_suspend_mode)
667 rdev_warn(rdev, "No configuration\n");
671 if (rstate->enabled && rstate->disabled) {
672 rdev_err(rdev, "invalid configuration\n");
676 if (rstate->enabled && rdev->desc->ops->set_suspend_enable)
677 ret = rdev->desc->ops->set_suspend_enable(rdev);
678 else if (rstate->disabled && rdev->desc->ops->set_suspend_disable)
679 ret = rdev->desc->ops->set_suspend_disable(rdev);
680 else /* OK if set_suspend_enable or set_suspend_disable is NULL */
684 rdev_err(rdev, "failed to enabled/disable\n");
688 if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) {
689 ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV);
691 rdev_err(rdev, "failed to set voltage\n");
696 if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) {
697 ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode);
699 rdev_err(rdev, "failed to set mode\n");
706 /* locks held by caller */
707 static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state)
709 if (!rdev->constraints)
713 case PM_SUSPEND_STANDBY:
714 return suspend_set_state(rdev,
715 &rdev->constraints->state_standby);
717 return suspend_set_state(rdev,
718 &rdev->constraints->state_mem);
720 return suspend_set_state(rdev,
721 &rdev->constraints->state_disk);
727 static void print_constraints(struct regulator_dev *rdev)
729 struct regulation_constraints *constraints = rdev->constraints;
734 if (constraints->min_uV && constraints->max_uV) {
735 if (constraints->min_uV == constraints->max_uV)
736 count += sprintf(buf + count, "%d mV ",
737 constraints->min_uV / 1000);
739 count += sprintf(buf + count, "%d <--> %d mV ",
740 constraints->min_uV / 1000,
741 constraints->max_uV / 1000);
744 if (!constraints->min_uV ||
745 constraints->min_uV != constraints->max_uV) {
746 ret = _regulator_get_voltage(rdev);
748 count += sprintf(buf + count, "at %d mV ", ret / 1000);
751 if (constraints->uV_offset)
752 count += sprintf(buf, "%dmV offset ",
753 constraints->uV_offset / 1000);
755 if (constraints->min_uA && constraints->max_uA) {
756 if (constraints->min_uA == constraints->max_uA)
757 count += sprintf(buf + count, "%d mA ",
758 constraints->min_uA / 1000);
760 count += sprintf(buf + count, "%d <--> %d mA ",
761 constraints->min_uA / 1000,
762 constraints->max_uA / 1000);
765 if (!constraints->min_uA ||
766 constraints->min_uA != constraints->max_uA) {
767 ret = _regulator_get_current_limit(rdev);
769 count += sprintf(buf + count, "at %d mA ", ret / 1000);
772 if (constraints->valid_modes_mask & REGULATOR_MODE_FAST)
773 count += sprintf(buf + count, "fast ");
774 if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL)
775 count += sprintf(buf + count, "normal ");
776 if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE)
777 count += sprintf(buf + count, "idle ");
778 if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY)
779 count += sprintf(buf + count, "standby");
782 sprintf(buf, "no parameters");
784 rdev_info(rdev, "%s\n", buf);
786 if ((constraints->min_uV != constraints->max_uV) &&
787 !(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE))
789 "Voltage range but no REGULATOR_CHANGE_VOLTAGE\n");
792 static int machine_constraints_voltage(struct regulator_dev *rdev,
793 struct regulation_constraints *constraints)
795 struct regulator_ops *ops = rdev->desc->ops;
798 /* do we need to apply the constraint voltage */
799 if (rdev->constraints->apply_uV &&
800 rdev->constraints->min_uV == rdev->constraints->max_uV) {
801 ret = _regulator_do_set_voltage(rdev,
802 rdev->constraints->min_uV,
803 rdev->constraints->max_uV);
805 rdev_err(rdev, "failed to apply %duV constraint\n",
806 rdev->constraints->min_uV);
811 /* constrain machine-level voltage specs to fit
812 * the actual range supported by this regulator.
814 if (ops->list_voltage && rdev->desc->n_voltages) {
815 int count = rdev->desc->n_voltages;
817 int min_uV = INT_MAX;
818 int max_uV = INT_MIN;
819 int cmin = constraints->min_uV;
820 int cmax = constraints->max_uV;
822 /* it's safe to autoconfigure fixed-voltage supplies
823 and the constraints are used by list_voltage. */
824 if (count == 1 && !cmin) {
827 constraints->min_uV = cmin;
828 constraints->max_uV = cmax;
831 /* voltage constraints are optional */
832 if ((cmin == 0) && (cmax == 0))
835 /* else require explicit machine-level constraints */
836 if (cmin <= 0 || cmax <= 0 || cmax < cmin) {
837 rdev_err(rdev, "invalid voltage constraints\n");
841 /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */
842 for (i = 0; i < count; i++) {
845 value = ops->list_voltage(rdev, i);
849 /* maybe adjust [min_uV..max_uV] */
850 if (value >= cmin && value < min_uV)
852 if (value <= cmax && value > max_uV)
856 /* final: [min_uV..max_uV] valid iff constraints valid */
857 if (max_uV < min_uV) {
858 rdev_err(rdev, "unsupportable voltage constraints\n");
862 /* use regulator's subset of machine constraints */
863 if (constraints->min_uV < min_uV) {
864 rdev_dbg(rdev, "override min_uV, %d -> %d\n",
865 constraints->min_uV, min_uV);
866 constraints->min_uV = min_uV;
868 if (constraints->max_uV > max_uV) {
869 rdev_dbg(rdev, "override max_uV, %d -> %d\n",
870 constraints->max_uV, max_uV);
871 constraints->max_uV = max_uV;
879 * set_machine_constraints - sets regulator constraints
880 * @rdev: regulator source
881 * @constraints: constraints to apply
883 * Allows platform initialisation code to define and constrain
884 * regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
885 * Constraints *must* be set by platform code in order for some
886 * regulator operations to proceed i.e. set_voltage, set_current_limit,
889 static int set_machine_constraints(struct regulator_dev *rdev,
890 const struct regulation_constraints *constraints)
893 struct regulator_ops *ops = rdev->desc->ops;
896 rdev->constraints = kmemdup(constraints, sizeof(*constraints),
899 rdev->constraints = kzalloc(sizeof(*constraints),
901 if (!rdev->constraints)
904 ret = machine_constraints_voltage(rdev, rdev->constraints);
908 /* do we need to setup our suspend state */
909 if (rdev->constraints->initial_state) {
910 ret = suspend_prepare(rdev, rdev->constraints->initial_state);
912 rdev_err(rdev, "failed to set suspend state\n");
917 if (rdev->constraints->initial_mode) {
918 if (!ops->set_mode) {
919 rdev_err(rdev, "no set_mode operation\n");
924 ret = ops->set_mode(rdev, rdev->constraints->initial_mode);
926 rdev_err(rdev, "failed to set initial mode: %d\n", ret);
931 /* If the constraints say the regulator should be on at this point
932 * and we have control then make sure it is enabled.
934 if ((rdev->constraints->always_on || rdev->constraints->boot_on) &&
936 ret = ops->enable(rdev);
938 rdev_err(rdev, "failed to enable\n");
943 if (rdev->constraints->ramp_delay && ops->set_ramp_delay) {
944 ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay);
946 rdev_err(rdev, "failed to set ramp_delay\n");
951 print_constraints(rdev);
954 kfree(rdev->constraints);
955 rdev->constraints = NULL;
960 * set_supply - set regulator supply regulator
961 * @rdev: regulator name
962 * @supply_rdev: supply regulator name
964 * Called by platform initialisation code to set the supply regulator for this
965 * regulator. This ensures that a regulators supply will also be enabled by the
966 * core if it's child is enabled.
968 static int set_supply(struct regulator_dev *rdev,
969 struct regulator_dev *supply_rdev)
973 rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev));
975 rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY");
976 if (rdev->supply == NULL) {
980 supply_rdev->open_count++;
986 * set_consumer_device_supply - Bind a regulator to a symbolic supply
987 * @rdev: regulator source
988 * @consumer_dev_name: dev_name() string for device supply applies to
989 * @supply: symbolic name for supply
991 * Allows platform initialisation code to map physical regulator
992 * sources to symbolic names for supplies for use by devices. Devices
993 * should use these symbolic names to request regulators, avoiding the
994 * need to provide board-specific regulator names as platform data.
996 static int set_consumer_device_supply(struct regulator_dev *rdev,
997 const char *consumer_dev_name,
1000 struct regulator_map *node;
1006 if (consumer_dev_name != NULL)
1011 list_for_each_entry(node, ®ulator_map_list, list) {
1012 if (node->dev_name && consumer_dev_name) {
1013 if (strcmp(node->dev_name, consumer_dev_name) != 0)
1015 } else if (node->dev_name || consumer_dev_name) {
1019 if (strcmp(node->supply, supply) != 0)
1022 pr_debug("%s: %s/%s is '%s' supply; fail %s/%s\n",
1024 dev_name(&node->regulator->dev),
1025 node->regulator->desc->name,
1027 dev_name(&rdev->dev), rdev_get_name(rdev));
1031 node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL);
1035 node->regulator = rdev;
1036 node->supply = supply;
1039 node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL);
1040 if (node->dev_name == NULL) {
1046 list_add(&node->list, ®ulator_map_list);
1050 static void unset_regulator_supplies(struct regulator_dev *rdev)
1052 struct regulator_map *node, *n;
1054 list_for_each_entry_safe(node, n, ®ulator_map_list, list) {
1055 if (rdev == node->regulator) {
1056 list_del(&node->list);
1057 kfree(node->dev_name);
1063 #define REG_STR_SIZE 64
1065 static struct regulator *create_regulator(struct regulator_dev *rdev,
1067 const char *supply_name)
1069 struct regulator *regulator;
1070 char buf[REG_STR_SIZE];
1073 regulator = kzalloc(sizeof(*regulator), GFP_KERNEL);
1074 if (regulator == NULL)
1077 mutex_lock(&rdev->mutex);
1078 regulator->rdev = rdev;
1079 list_add(®ulator->list, &rdev->consumer_list);
1082 regulator->dev = dev;
1084 /* Add a link to the device sysfs entry */
1085 size = scnprintf(buf, REG_STR_SIZE, "%s-%s",
1086 dev->kobj.name, supply_name);
1087 if (size >= REG_STR_SIZE)
1090 regulator->supply_name = kstrdup(buf, GFP_KERNEL);
1091 if (regulator->supply_name == NULL)
1094 err = sysfs_create_link(&rdev->dev.kobj, &dev->kobj,
1097 rdev_warn(rdev, "could not add device link %s err %d\n",
1098 dev->kobj.name, err);
1102 regulator->supply_name = kstrdup(supply_name, GFP_KERNEL);
1103 if (regulator->supply_name == NULL)
1107 regulator->debugfs = debugfs_create_dir(regulator->supply_name,
1109 if (!regulator->debugfs) {
1110 rdev_warn(rdev, "Failed to create debugfs directory\n");
1112 debugfs_create_u32("uA_load", 0444, regulator->debugfs,
1113 ®ulator->uA_load);
1114 debugfs_create_u32("min_uV", 0444, regulator->debugfs,
1115 ®ulator->min_uV);
1116 debugfs_create_u32("max_uV", 0444, regulator->debugfs,
1117 ®ulator->max_uV);
1121 * Check now if the regulator is an always on regulator - if
1122 * it is then we don't need to do nearly so much work for
1123 * enable/disable calls.
1125 if (!_regulator_can_change_status(rdev) &&
1126 _regulator_is_enabled(rdev))
1127 regulator->always_on = true;
1129 mutex_unlock(&rdev->mutex);
1132 list_del(®ulator->list);
1134 mutex_unlock(&rdev->mutex);
1138 static int _regulator_get_enable_time(struct regulator_dev *rdev)
1140 if (!rdev->desc->ops->enable_time)
1141 return rdev->desc->enable_time;
1142 return rdev->desc->ops->enable_time(rdev);
1145 static struct regulator_dev *regulator_dev_lookup(struct device *dev,
1149 struct regulator_dev *r;
1150 struct device_node *node;
1151 struct regulator_map *map;
1152 const char *devname = NULL;
1154 /* first do a dt based lookup */
1155 if (dev && dev->of_node) {
1156 node = of_get_regulator(dev, supply);
1158 list_for_each_entry(r, ®ulator_list, list)
1159 if (r->dev.parent &&
1160 node == r->dev.of_node)
1164 * If we couldn't even get the node then it's
1165 * not just that the device didn't register
1166 * yet, there's no node and we'll never
1173 /* if not found, try doing it non-dt way */
1175 devname = dev_name(dev);
1177 list_for_each_entry(r, ®ulator_list, list)
1178 if (strcmp(rdev_get_name(r), supply) == 0)
1181 list_for_each_entry(map, ®ulator_map_list, list) {
1182 /* If the mapping has a device set up it must match */
1183 if (map->dev_name &&
1184 (!devname || strcmp(map->dev_name, devname)))
1187 if (strcmp(map->supply, supply) == 0)
1188 return map->regulator;
1195 /* Internal regulator request function */
1196 static struct regulator *_regulator_get(struct device *dev, const char *id,
1199 struct regulator_dev *rdev;
1200 struct regulator *regulator = ERR_PTR(-EPROBE_DEFER);
1201 const char *devname = NULL;
1205 pr_err("get() with no identifier\n");
1210 devname = dev_name(dev);
1212 mutex_lock(®ulator_list_mutex);
1214 rdev = regulator_dev_lookup(dev, id, &ret);
1218 if (board_wants_dummy_regulator) {
1219 rdev = dummy_regulator_rdev;
1223 #ifdef CONFIG_REGULATOR_DUMMY
1225 devname = "deviceless";
1227 /* If the board didn't flag that it was fully constrained then
1228 * substitute in a dummy regulator so consumers can continue.
1230 if (!has_full_constraints) {
1231 pr_warn("%s supply %s not found, using dummy regulator\n",
1233 rdev = dummy_regulator_rdev;
1238 mutex_unlock(®ulator_list_mutex);
1242 if (rdev->exclusive) {
1243 regulator = ERR_PTR(-EPERM);
1247 if (exclusive && rdev->open_count) {
1248 regulator = ERR_PTR(-EBUSY);
1252 if (!try_module_get(rdev->owner))
1255 regulator = create_regulator(rdev, dev, id);
1256 if (regulator == NULL) {
1257 regulator = ERR_PTR(-ENOMEM);
1258 module_put(rdev->owner);
1264 rdev->exclusive = 1;
1266 ret = _regulator_is_enabled(rdev);
1268 rdev->use_count = 1;
1270 rdev->use_count = 0;
1274 mutex_unlock(®ulator_list_mutex);
1280 * regulator_get - lookup and obtain a reference to a regulator.
1281 * @dev: device for regulator "consumer"
1282 * @id: Supply name or regulator ID.
1284 * Returns a struct regulator corresponding to the regulator producer,
1285 * or IS_ERR() condition containing errno.
1287 * Use of supply names configured via regulator_set_device_supply() is
1288 * strongly encouraged. It is recommended that the supply name used
1289 * should match the name used for the supply and/or the relevant
1290 * device pins in the datasheet.
1292 struct regulator *regulator_get(struct device *dev, const char *id)
1294 return _regulator_get(dev, id, 0);
1296 EXPORT_SYMBOL_GPL(regulator_get);
1298 static void devm_regulator_release(struct device *dev, void *res)
1300 regulator_put(*(struct regulator **)res);
1304 * devm_regulator_get - Resource managed regulator_get()
1305 * @dev: device for regulator "consumer"
1306 * @id: Supply name or regulator ID.
1308 * Managed regulator_get(). Regulators returned from this function are
1309 * automatically regulator_put() on driver detach. See regulator_get() for more
1312 struct regulator *devm_regulator_get(struct device *dev, const char *id)
1314 struct regulator **ptr, *regulator;
1316 ptr = devres_alloc(devm_regulator_release, sizeof(*ptr), GFP_KERNEL);
1318 return ERR_PTR(-ENOMEM);
1320 regulator = regulator_get(dev, id);
1321 if (!IS_ERR(regulator)) {
1323 devres_add(dev, ptr);
1330 EXPORT_SYMBOL_GPL(devm_regulator_get);
1333 * regulator_get_exclusive - obtain exclusive access to a regulator.
1334 * @dev: device for regulator "consumer"
1335 * @id: Supply name or regulator ID.
1337 * Returns a struct regulator corresponding to the regulator producer,
1338 * or IS_ERR() condition containing errno. Other consumers will be
1339 * unable to obtain this reference is held and the use count for the
1340 * regulator will be initialised to reflect the current state of the
1343 * This is intended for use by consumers which cannot tolerate shared
1344 * use of the regulator such as those which need to force the
1345 * regulator off for correct operation of the hardware they are
1348 * Use of supply names configured via regulator_set_device_supply() is
1349 * strongly encouraged. It is recommended that the supply name used
1350 * should match the name used for the supply and/or the relevant
1351 * device pins in the datasheet.
1353 struct regulator *regulator_get_exclusive(struct device *dev, const char *id)
1355 return _regulator_get(dev, id, 1);
1357 EXPORT_SYMBOL_GPL(regulator_get_exclusive);
1360 * regulator_put - "free" the regulator source
1361 * @regulator: regulator source
1363 * Note: drivers must ensure that all regulator_enable calls made on this
1364 * regulator source are balanced by regulator_disable calls prior to calling
1367 void regulator_put(struct regulator *regulator)
1369 struct regulator_dev *rdev;
1371 if (regulator == NULL || IS_ERR(regulator))
1374 mutex_lock(®ulator_list_mutex);
1375 rdev = regulator->rdev;
1377 debugfs_remove_recursive(regulator->debugfs);
1379 /* remove any sysfs entries */
1381 sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
1382 kfree(regulator->supply_name);
1383 list_del(®ulator->list);
1387 rdev->exclusive = 0;
1389 module_put(rdev->owner);
1390 mutex_unlock(®ulator_list_mutex);
1392 EXPORT_SYMBOL_GPL(regulator_put);
1394 static int devm_regulator_match(struct device *dev, void *res, void *data)
1396 struct regulator **r = res;
1405 * devm_regulator_put - Resource managed regulator_put()
1406 * @regulator: regulator to free
1408 * Deallocate a regulator allocated with devm_regulator_get(). Normally
1409 * this function will not need to be called and the resource management
1410 * code will ensure that the resource is freed.
1412 void devm_regulator_put(struct regulator *regulator)
1416 rc = devres_release(regulator->dev, devm_regulator_release,
1417 devm_regulator_match, regulator);
1421 EXPORT_SYMBOL_GPL(devm_regulator_put);
1423 static int _regulator_do_enable(struct regulator_dev *rdev)
1427 /* Query before enabling in case configuration dependent. */
1428 ret = _regulator_get_enable_time(rdev);
1432 rdev_warn(rdev, "enable_time() failed: %d\n", ret);
1436 trace_regulator_enable(rdev_get_name(rdev));
1438 if (rdev->ena_gpio) {
1439 gpio_set_value_cansleep(rdev->ena_gpio,
1440 !rdev->ena_gpio_invert);
1441 rdev->ena_gpio_state = 1;
1442 } else if (rdev->desc->ops->enable) {
1443 ret = rdev->desc->ops->enable(rdev);
1450 /* Allow the regulator to ramp; it would be useful to extend
1451 * this for bulk operations so that the regulators can ramp
1453 trace_regulator_enable_delay(rdev_get_name(rdev));
1455 if (delay >= 1000) {
1456 mdelay(delay / 1000);
1457 udelay(delay % 1000);
1462 trace_regulator_enable_complete(rdev_get_name(rdev));
1467 /* locks held by regulator_enable() */
1468 static int _regulator_enable(struct regulator_dev *rdev)
1472 /* check voltage and requested load before enabling */
1473 if (rdev->constraints &&
1474 (rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_DRMS))
1475 drms_uA_update(rdev);
1477 if (rdev->use_count == 0) {
1478 /* The regulator may on if it's not switchable or left on */
1479 ret = _regulator_is_enabled(rdev);
1480 if (ret == -EINVAL || ret == 0) {
1481 if (!_regulator_can_change_status(rdev))
1484 ret = _regulator_do_enable(rdev);
1488 } else if (ret < 0) {
1489 rdev_err(rdev, "is_enabled() failed: %d\n", ret);
1492 /* Fallthrough on positive return values - already enabled */
1501 * regulator_enable - enable regulator output
1502 * @regulator: regulator source
1504 * Request that the regulator be enabled with the regulator output at
1505 * the predefined voltage or current value. Calls to regulator_enable()
1506 * must be balanced with calls to regulator_disable().
1508 * NOTE: the output value can be set by other drivers, boot loader or may be
1509 * hardwired in the regulator.
1511 int regulator_enable(struct regulator *regulator)
1513 struct regulator_dev *rdev = regulator->rdev;
1516 if (regulator->always_on)
1520 ret = regulator_enable(rdev->supply);
1525 mutex_lock(&rdev->mutex);
1526 ret = _regulator_enable(rdev);
1527 mutex_unlock(&rdev->mutex);
1529 if (ret != 0 && rdev->supply)
1530 regulator_disable(rdev->supply);
1534 EXPORT_SYMBOL_GPL(regulator_enable);
1536 static int _regulator_do_disable(struct regulator_dev *rdev)
1540 trace_regulator_disable(rdev_get_name(rdev));
1542 if (rdev->ena_gpio) {
1543 gpio_set_value_cansleep(rdev->ena_gpio,
1544 rdev->ena_gpio_invert);
1545 rdev->ena_gpio_state = 0;
1547 } else if (rdev->desc->ops->disable) {
1548 ret = rdev->desc->ops->disable(rdev);
1553 trace_regulator_disable_complete(rdev_get_name(rdev));
1555 _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
1560 /* locks held by regulator_disable() */
1561 static int _regulator_disable(struct regulator_dev *rdev)
1565 if (WARN(rdev->use_count <= 0,
1566 "unbalanced disables for %s\n", rdev_get_name(rdev)))
1569 /* are we the last user and permitted to disable ? */
1570 if (rdev->use_count == 1 &&
1571 (rdev->constraints && !rdev->constraints->always_on)) {
1573 /* we are last user */
1574 if (_regulator_can_change_status(rdev)) {
1575 ret = _regulator_do_disable(rdev);
1577 rdev_err(rdev, "failed to disable\n");
1582 rdev->use_count = 0;
1583 } else if (rdev->use_count > 1) {
1585 if (rdev->constraints &&
1586 (rdev->constraints->valid_ops_mask &
1587 REGULATOR_CHANGE_DRMS))
1588 drms_uA_update(rdev);
1597 * regulator_disable - disable regulator output
1598 * @regulator: regulator source
1600 * Disable the regulator output voltage or current. Calls to
1601 * regulator_enable() must be balanced with calls to
1602 * regulator_disable().
1604 * NOTE: this will only disable the regulator output if no other consumer
1605 * devices have it enabled, the regulator device supports disabling and
1606 * machine constraints permit this operation.
1608 int regulator_disable(struct regulator *regulator)
1610 struct regulator_dev *rdev = regulator->rdev;
1613 if (regulator->always_on)
1616 mutex_lock(&rdev->mutex);
1617 ret = _regulator_disable(rdev);
1618 mutex_unlock(&rdev->mutex);
1620 if (ret == 0 && rdev->supply)
1621 regulator_disable(rdev->supply);
1625 EXPORT_SYMBOL_GPL(regulator_disable);
1627 /* locks held by regulator_force_disable() */
1628 static int _regulator_force_disable(struct regulator_dev *rdev)
1633 if (rdev->desc->ops->disable) {
1634 /* ah well, who wants to live forever... */
1635 ret = rdev->desc->ops->disable(rdev);
1637 rdev_err(rdev, "failed to force disable\n");
1640 /* notify other consumers that power has been forced off */
1641 _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
1642 REGULATOR_EVENT_DISABLE, NULL);
1649 * regulator_force_disable - force disable regulator output
1650 * @regulator: regulator source
1652 * Forcibly disable the regulator output voltage or current.
1653 * NOTE: this *will* disable the regulator output even if other consumer
1654 * devices have it enabled. This should be used for situations when device
1655 * damage will likely occur if the regulator is not disabled (e.g. over temp).
1657 int regulator_force_disable(struct regulator *regulator)
1659 struct regulator_dev *rdev = regulator->rdev;
1662 mutex_lock(&rdev->mutex);
1663 regulator->uA_load = 0;
1664 ret = _regulator_force_disable(regulator->rdev);
1665 mutex_unlock(&rdev->mutex);
1668 while (rdev->open_count--)
1669 regulator_disable(rdev->supply);
1673 EXPORT_SYMBOL_GPL(regulator_force_disable);
1675 static void regulator_disable_work(struct work_struct *work)
1677 struct regulator_dev *rdev = container_of(work, struct regulator_dev,
1681 mutex_lock(&rdev->mutex);
1683 BUG_ON(!rdev->deferred_disables);
1685 count = rdev->deferred_disables;
1686 rdev->deferred_disables = 0;
1688 for (i = 0; i < count; i++) {
1689 ret = _regulator_disable(rdev);
1691 rdev_err(rdev, "Deferred disable failed: %d\n", ret);
1694 mutex_unlock(&rdev->mutex);
1697 for (i = 0; i < count; i++) {
1698 ret = regulator_disable(rdev->supply);
1701 "Supply disable failed: %d\n", ret);
1708 * regulator_disable_deferred - disable regulator output with delay
1709 * @regulator: regulator source
1710 * @ms: miliseconds until the regulator is disabled
1712 * Execute regulator_disable() on the regulator after a delay. This
1713 * is intended for use with devices that require some time to quiesce.
1715 * NOTE: this will only disable the regulator output if no other consumer
1716 * devices have it enabled, the regulator device supports disabling and
1717 * machine constraints permit this operation.
1719 int regulator_disable_deferred(struct regulator *regulator, int ms)
1721 struct regulator_dev *rdev = regulator->rdev;
1724 if (regulator->always_on)
1727 mutex_lock(&rdev->mutex);
1728 rdev->deferred_disables++;
1729 mutex_unlock(&rdev->mutex);
1731 ret = schedule_delayed_work(&rdev->disable_work,
1732 msecs_to_jiffies(ms));
1738 EXPORT_SYMBOL_GPL(regulator_disable_deferred);
1741 * regulator_is_enabled_regmap - standard is_enabled() for regmap users
1743 * @rdev: regulator to operate on
1745 * Regulators that use regmap for their register I/O can set the
1746 * enable_reg and enable_mask fields in their descriptor and then use
1747 * this as their is_enabled operation, saving some code.
1749 int regulator_is_enabled_regmap(struct regulator_dev *rdev)
1754 ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
1758 return (val & rdev->desc->enable_mask) != 0;
1760 EXPORT_SYMBOL_GPL(regulator_is_enabled_regmap);
1763 * regulator_enable_regmap - standard enable() for regmap users
1765 * @rdev: regulator to operate on
1767 * Regulators that use regmap for their register I/O can set the
1768 * enable_reg and enable_mask fields in their descriptor and then use
1769 * this as their enable() operation, saving some code.
1771 int regulator_enable_regmap(struct regulator_dev *rdev)
1773 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
1774 rdev->desc->enable_mask,
1775 rdev->desc->enable_mask);
1777 EXPORT_SYMBOL_GPL(regulator_enable_regmap);
1780 * regulator_disable_regmap - standard disable() for regmap users
1782 * @rdev: regulator to operate on
1784 * Regulators that use regmap for their register I/O can set the
1785 * enable_reg and enable_mask fields in their descriptor and then use
1786 * this as their disable() operation, saving some code.
1788 int regulator_disable_regmap(struct regulator_dev *rdev)
1790 return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
1791 rdev->desc->enable_mask, 0);
1793 EXPORT_SYMBOL_GPL(regulator_disable_regmap);
1795 static int _regulator_is_enabled(struct regulator_dev *rdev)
1797 /* A GPIO control always takes precedence */
1799 return rdev->ena_gpio_state;
1801 /* If we don't know then assume that the regulator is always on */
1802 if (!rdev->desc->ops->is_enabled)
1805 return rdev->desc->ops->is_enabled(rdev);
1809 * regulator_is_enabled - is the regulator output enabled
1810 * @regulator: regulator source
1812 * Returns positive if the regulator driver backing the source/client
1813 * has requested that the device be enabled, zero if it hasn't, else a
1814 * negative errno code.
1816 * Note that the device backing this regulator handle can have multiple
1817 * users, so it might be enabled even if regulator_enable() was never
1818 * called for this particular source.
1820 int regulator_is_enabled(struct regulator *regulator)
1824 if (regulator->always_on)
1827 mutex_lock(®ulator->rdev->mutex);
1828 ret = _regulator_is_enabled(regulator->rdev);
1829 mutex_unlock(®ulator->rdev->mutex);
1833 EXPORT_SYMBOL_GPL(regulator_is_enabled);
1836 * regulator_count_voltages - count regulator_list_voltage() selectors
1837 * @regulator: regulator source
1839 * Returns number of selectors, or negative errno. Selectors are
1840 * numbered starting at zero, and typically correspond to bitfields
1841 * in hardware registers.
1843 int regulator_count_voltages(struct regulator *regulator)
1845 struct regulator_dev *rdev = regulator->rdev;
1847 return rdev->desc->n_voltages ? : -EINVAL;
1849 EXPORT_SYMBOL_GPL(regulator_count_voltages);
1852 * regulator_list_voltage_linear - List voltages with simple calculation
1854 * @rdev: Regulator device
1855 * @selector: Selector to convert into a voltage
1857 * Regulators with a simple linear mapping between voltages and
1858 * selectors can set min_uV and uV_step in the regulator descriptor
1859 * and then use this function as their list_voltage() operation,
1861 int regulator_list_voltage_linear(struct regulator_dev *rdev,
1862 unsigned int selector)
1864 if (selector >= rdev->desc->n_voltages)
1867 return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
1869 EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
1872 * regulator_list_voltage_table - List voltages with table based mapping
1874 * @rdev: Regulator device
1875 * @selector: Selector to convert into a voltage
1877 * Regulators with table based mapping between voltages and
1878 * selectors can set volt_table in the regulator descriptor
1879 * and then use this function as their list_voltage() operation.
1881 int regulator_list_voltage_table(struct regulator_dev *rdev,
1882 unsigned int selector)
1884 if (!rdev->desc->volt_table) {
1885 BUG_ON(!rdev->desc->volt_table);
1889 if (selector >= rdev->desc->n_voltages)
1892 return rdev->desc->volt_table[selector];
1894 EXPORT_SYMBOL_GPL(regulator_list_voltage_table);
1897 * regulator_list_voltage - enumerate supported voltages
1898 * @regulator: regulator source
1899 * @selector: identify voltage to list
1900 * Context: can sleep
1902 * Returns a voltage that can be passed to @regulator_set_voltage(),
1903 * zero if this selector code can't be used on this system, or a
1906 int regulator_list_voltage(struct regulator *regulator, unsigned selector)
1908 struct regulator_dev *rdev = regulator->rdev;
1909 struct regulator_ops *ops = rdev->desc->ops;
1912 if (!ops->list_voltage || selector >= rdev->desc->n_voltages)
1915 mutex_lock(&rdev->mutex);
1916 ret = ops->list_voltage(rdev, selector);
1917 mutex_unlock(&rdev->mutex);
1920 if (ret < rdev->constraints->min_uV)
1922 else if (ret > rdev->constraints->max_uV)
1928 EXPORT_SYMBOL_GPL(regulator_list_voltage);
1931 * regulator_is_supported_voltage - check if a voltage range can be supported
1933 * @regulator: Regulator to check.
1934 * @min_uV: Minimum required voltage in uV.
1935 * @max_uV: Maximum required voltage in uV.
1937 * Returns a boolean or a negative error code.
1939 int regulator_is_supported_voltage(struct regulator *regulator,
1940 int min_uV, int max_uV)
1942 struct regulator_dev *rdev = regulator->rdev;
1943 int i, voltages, ret;
1945 /* If we can't change voltage check the current voltage */
1946 if (!(rdev->constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE)) {
1947 ret = regulator_get_voltage(regulator);
1949 return (min_uV >= ret && ret <= max_uV);
1954 ret = regulator_count_voltages(regulator);
1959 for (i = 0; i < voltages; i++) {
1960 ret = regulator_list_voltage(regulator, i);
1962 if (ret >= min_uV && ret <= max_uV)
1968 EXPORT_SYMBOL_GPL(regulator_is_supported_voltage);
1971 * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users
1973 * @rdev: regulator to operate on
1975 * Regulators that use regmap for their register I/O can set the
1976 * vsel_reg and vsel_mask fields in their descriptor and then use this
1977 * as their get_voltage_vsel operation, saving some code.
1979 int regulator_get_voltage_sel_regmap(struct regulator_dev *rdev)
1984 ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
1988 val &= rdev->desc->vsel_mask;
1989 val >>= ffs(rdev->desc->vsel_mask) - 1;
1993 EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_regmap);
1996 * regulator_set_voltage_sel_regmap - standard set_voltage_sel for regmap users
1998 * @rdev: regulator to operate on
1999 * @sel: Selector to set
2001 * Regulators that use regmap for their register I/O can set the
2002 * vsel_reg and vsel_mask fields in their descriptor and then use this
2003 * as their set_voltage_vsel operation, saving some code.
2005 int regulator_set_voltage_sel_regmap(struct regulator_dev *rdev, unsigned sel)
2007 sel <<= ffs(rdev->desc->vsel_mask) - 1;
2009 return regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
2010 rdev->desc->vsel_mask, sel);
2012 EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_regmap);
2015 * regulator_map_voltage_iterate - map_voltage() based on list_voltage()
2017 * @rdev: Regulator to operate on
2018 * @min_uV: Lower bound for voltage
2019 * @max_uV: Upper bound for voltage
2021 * Drivers implementing set_voltage_sel() and list_voltage() can use
2022 * this as their map_voltage() operation. It will find a suitable
2023 * voltage by calling list_voltage() until it gets something in bounds
2024 * for the requested voltages.
2026 int regulator_map_voltage_iterate(struct regulator_dev *rdev,
2027 int min_uV, int max_uV)
2029 int best_val = INT_MAX;
2033 /* Find the smallest voltage that falls within the specified
2036 for (i = 0; i < rdev->desc->n_voltages; i++) {
2037 ret = rdev->desc->ops->list_voltage(rdev, i);
2041 if (ret < best_val && ret >= min_uV && ret <= max_uV) {
2047 if (best_val != INT_MAX)
2052 EXPORT_SYMBOL_GPL(regulator_map_voltage_iterate);
2055 * regulator_map_voltage_linear - map_voltage() for simple linear mappings
2057 * @rdev: Regulator to operate on
2058 * @min_uV: Lower bound for voltage
2059 * @max_uV: Upper bound for voltage
2061 * Drivers providing min_uV and uV_step in their regulator_desc can
2062 * use this as their map_voltage() operation.
2064 int regulator_map_voltage_linear(struct regulator_dev *rdev,
2065 int min_uV, int max_uV)
2069 /* Allow uV_step to be 0 for fixed voltage */
2070 if (rdev->desc->n_voltages == 1 && rdev->desc->uV_step == 0) {
2071 if (min_uV <= rdev->desc->min_uV && rdev->desc->min_uV <= max_uV)
2077 if (!rdev->desc->uV_step) {
2078 BUG_ON(!rdev->desc->uV_step);
2082 if (min_uV < rdev->desc->min_uV)
2083 min_uV = rdev->desc->min_uV;
2085 ret = DIV_ROUND_UP(min_uV - rdev->desc->min_uV, rdev->desc->uV_step);
2089 /* Map back into a voltage to verify we're still in bounds */
2090 voltage = rdev->desc->ops->list_voltage(rdev, ret);
2091 if (voltage < min_uV || voltage > max_uV)
2096 EXPORT_SYMBOL_GPL(regulator_map_voltage_linear);
2098 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
2099 int min_uV, int max_uV)
2104 unsigned int selector;
2105 int old_selector = -1;
2107 trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
2109 min_uV += rdev->constraints->uV_offset;
2110 max_uV += rdev->constraints->uV_offset;
2113 * If we can't obtain the old selector there is not enough
2114 * info to call set_voltage_time_sel().
2116 if (_regulator_is_enabled(rdev) &&
2117 rdev->desc->ops->set_voltage_time_sel &&
2118 rdev->desc->ops->get_voltage_sel) {
2119 old_selector = rdev->desc->ops->get_voltage_sel(rdev);
2120 if (old_selector < 0)
2121 return old_selector;
2124 if (rdev->desc->ops->set_voltage) {
2125 ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV,
2129 if (rdev->desc->ops->list_voltage)
2130 best_val = rdev->desc->ops->list_voltage(rdev,
2133 best_val = _regulator_get_voltage(rdev);
2136 } else if (rdev->desc->ops->set_voltage_sel) {
2137 if (rdev->desc->ops->map_voltage) {
2138 ret = rdev->desc->ops->map_voltage(rdev, min_uV,
2141 if (rdev->desc->ops->list_voltage ==
2142 regulator_list_voltage_linear)
2143 ret = regulator_map_voltage_linear(rdev,
2146 ret = regulator_map_voltage_iterate(rdev,
2151 best_val = rdev->desc->ops->list_voltage(rdev, ret);
2152 if (min_uV <= best_val && max_uV >= best_val) {
2154 ret = rdev->desc->ops->set_voltage_sel(rdev,
2164 /* Call set_voltage_time_sel if successfully obtained old_selector */
2165 if (ret == 0 && _regulator_is_enabled(rdev) && old_selector >= 0 &&
2166 rdev->desc->ops->set_voltage_time_sel) {
2168 delay = rdev->desc->ops->set_voltage_time_sel(rdev,
2169 old_selector, selector);
2171 rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n",
2176 /* Insert any necessary delays */
2177 if (delay >= 1000) {
2178 mdelay(delay / 1000);
2179 udelay(delay % 1000);
2185 if (ret == 0 && best_val >= 0) {
2186 unsigned long data = best_val;
2188 _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
2192 trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
2198 * regulator_set_voltage - set regulator output voltage
2199 * @regulator: regulator source
2200 * @min_uV: Minimum required voltage in uV
2201 * @max_uV: Maximum acceptable voltage in uV
2203 * Sets a voltage regulator to the desired output voltage. This can be set
2204 * during any regulator state. IOW, regulator can be disabled or enabled.
2206 * If the regulator is enabled then the voltage will change to the new value
2207 * immediately otherwise if the regulator is disabled the regulator will
2208 * output at the new voltage when enabled.
2210 * NOTE: If the regulator is shared between several devices then the lowest
2211 * request voltage that meets the system constraints will be used.
2212 * Regulator system constraints must be set for this regulator before
2213 * calling this function otherwise this call will fail.
2215 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV)
2217 struct regulator_dev *rdev = regulator->rdev;
2220 mutex_lock(&rdev->mutex);
2222 /* If we're setting the same range as last time the change
2223 * should be a noop (some cpufreq implementations use the same
2224 * voltage for multiple frequencies, for example).
2226 if (regulator->min_uV == min_uV && regulator->max_uV == max_uV)
2230 if (!rdev->desc->ops->set_voltage &&
2231 !rdev->desc->ops->set_voltage_sel) {
2236 /* constraints check */
2237 ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
2240 regulator->min_uV = min_uV;
2241 regulator->max_uV = max_uV;
2243 ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
2247 ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
2250 mutex_unlock(&rdev->mutex);
2253 EXPORT_SYMBOL_GPL(regulator_set_voltage);
2256 * regulator_set_voltage_time - get raise/fall time
2257 * @regulator: regulator source
2258 * @old_uV: starting voltage in microvolts
2259 * @new_uV: target voltage in microvolts
2261 * Provided with the starting and ending voltage, this function attempts to
2262 * calculate the time in microseconds required to rise or fall to this new
2265 int regulator_set_voltage_time(struct regulator *regulator,
2266 int old_uV, int new_uV)
2268 struct regulator_dev *rdev = regulator->rdev;
2269 struct regulator_ops *ops = rdev->desc->ops;
2275 /* Currently requires operations to do this */
2276 if (!ops->list_voltage || !ops->set_voltage_time_sel
2277 || !rdev->desc->n_voltages)
2280 for (i = 0; i < rdev->desc->n_voltages; i++) {
2281 /* We only look for exact voltage matches here */
2282 voltage = regulator_list_voltage(regulator, i);
2287 if (voltage == old_uV)
2289 if (voltage == new_uV)
2293 if (old_sel < 0 || new_sel < 0)
2296 return ops->set_voltage_time_sel(rdev, old_sel, new_sel);
2298 EXPORT_SYMBOL_GPL(regulator_set_voltage_time);
2301 *regulator_set_voltage_time_sel - get raise/fall time
2302 * @regulator: regulator source
2303 * @old_selector: selector for starting voltage
2304 * @new_selector: selector for target voltage
2306 * Provided with the starting and target voltage selectors, this function
2307 * returns time in microseconds required to rise or fall to this new voltage
2309 * Drivers providing ramp_delay in regulation_constraints can use this as their
2310 * set_voltage_time_sel() operation.
2312 int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
2313 unsigned int old_selector,
2314 unsigned int new_selector)
2316 unsigned int ramp_delay = 0;
2317 int old_volt, new_volt;
2319 if (rdev->constraints->ramp_delay)
2320 ramp_delay = rdev->constraints->ramp_delay;
2321 else if (rdev->desc->ramp_delay)
2322 ramp_delay = rdev->desc->ramp_delay;
2324 if (ramp_delay == 0) {
2325 rdev_warn(rdev, "ramp_delay not set\n");
2330 if (!rdev->desc->ops->list_voltage)
2333 old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
2334 new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
2336 return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
2338 EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
2341 * regulator_sync_voltage - re-apply last regulator output voltage
2342 * @regulator: regulator source
2344 * Re-apply the last configured voltage. This is intended to be used
2345 * where some external control source the consumer is cooperating with
2346 * has caused the configured voltage to change.
2348 int regulator_sync_voltage(struct regulator *regulator)
2350 struct regulator_dev *rdev = regulator->rdev;
2351 int ret, min_uV, max_uV;
2353 mutex_lock(&rdev->mutex);
2355 if (!rdev->desc->ops->set_voltage &&
2356 !rdev->desc->ops->set_voltage_sel) {
2361 /* This is only going to work if we've had a voltage configured. */
2362 if (!regulator->min_uV && !regulator->max_uV) {
2367 min_uV = regulator->min_uV;
2368 max_uV = regulator->max_uV;
2370 /* This should be a paranoia check... */
2371 ret = regulator_check_voltage(rdev, &min_uV, &max_uV);
2375 ret = regulator_check_consumers(rdev, &min_uV, &max_uV);
2379 ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
2382 mutex_unlock(&rdev->mutex);
2385 EXPORT_SYMBOL_GPL(regulator_sync_voltage);
2387 static int _regulator_get_voltage(struct regulator_dev *rdev)
2391 if (rdev->desc->ops->get_voltage_sel) {
2392 sel = rdev->desc->ops->get_voltage_sel(rdev);
2395 ret = rdev->desc->ops->list_voltage(rdev, sel);
2396 } else if (rdev->desc->ops->get_voltage) {
2397 ret = rdev->desc->ops->get_voltage(rdev);
2398 } else if (rdev->desc->ops->list_voltage) {
2399 ret = rdev->desc->ops->list_voltage(rdev, 0);
2406 return ret - rdev->constraints->uV_offset;
2410 * regulator_get_voltage - get regulator output voltage
2411 * @regulator: regulator source
2413 * This returns the current regulator voltage in uV.
2415 * NOTE: If the regulator is disabled it will return the voltage value. This
2416 * function should not be used to determine regulator state.
2418 int regulator_get_voltage(struct regulator *regulator)
2422 mutex_lock(®ulator->rdev->mutex);
2424 ret = _regulator_get_voltage(regulator->rdev);
2426 mutex_unlock(®ulator->rdev->mutex);
2430 EXPORT_SYMBOL_GPL(regulator_get_voltage);
2433 * regulator_set_current_limit - set regulator output current limit
2434 * @regulator: regulator source
2435 * @min_uA: Minimuum supported current in uA
2436 * @max_uA: Maximum supported current in uA
2438 * Sets current sink to the desired output current. This can be set during
2439 * any regulator state. IOW, regulator can be disabled or enabled.
2441 * If the regulator is enabled then the current will change to the new value
2442 * immediately otherwise if the regulator is disabled the regulator will
2443 * output at the new current when enabled.
2445 * NOTE: Regulator system constraints must be set for this regulator before
2446 * calling this function otherwise this call will fail.
2448 int regulator_set_current_limit(struct regulator *regulator,
2449 int min_uA, int max_uA)
2451 struct regulator_dev *rdev = regulator->rdev;
2454 mutex_lock(&rdev->mutex);
2457 if (!rdev->desc->ops->set_current_limit) {
2462 /* constraints check */
2463 ret = regulator_check_current_limit(rdev, &min_uA, &max_uA);
2467 ret = rdev->desc->ops->set_current_limit(rdev, min_uA, max_uA);
2469 mutex_unlock(&rdev->mutex);
2472 EXPORT_SYMBOL_GPL(regulator_set_current_limit);
2474 static int _regulator_get_current_limit(struct regulator_dev *rdev)
2478 mutex_lock(&rdev->mutex);
2481 if (!rdev->desc->ops->get_current_limit) {
2486 ret = rdev->desc->ops->get_current_limit(rdev);
2488 mutex_unlock(&rdev->mutex);
2493 * regulator_get_current_limit - get regulator output current
2494 * @regulator: regulator source
2496 * This returns the current supplied by the specified current sink in uA.
2498 * NOTE: If the regulator is disabled it will return the current value. This
2499 * function should not be used to determine regulator state.
2501 int regulator_get_current_limit(struct regulator *regulator)
2503 return _regulator_get_current_limit(regulator->rdev);
2505 EXPORT_SYMBOL_GPL(regulator_get_current_limit);
2508 * regulator_set_mode - set regulator operating mode
2509 * @regulator: regulator source
2510 * @mode: operating mode - one of the REGULATOR_MODE constants
2512 * Set regulator operating mode to increase regulator efficiency or improve
2513 * regulation performance.
2515 * NOTE: Regulator system constraints must be set for this regulator before
2516 * calling this function otherwise this call will fail.
2518 int regulator_set_mode(struct regulator *regulator, unsigned int mode)
2520 struct regulator_dev *rdev = regulator->rdev;
2522 int regulator_curr_mode;
2524 mutex_lock(&rdev->mutex);
2527 if (!rdev->desc->ops->set_mode) {
2532 /* return if the same mode is requested */
2533 if (rdev->desc->ops->get_mode) {
2534 regulator_curr_mode = rdev->desc->ops->get_mode(rdev);
2535 if (regulator_curr_mode == mode) {
2541 /* constraints check */
2542 ret = regulator_mode_constrain(rdev, &mode);
2546 ret = rdev->desc->ops->set_mode(rdev, mode);
2548 mutex_unlock(&rdev->mutex);
2551 EXPORT_SYMBOL_GPL(regulator_set_mode);
2553 static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
2557 mutex_lock(&rdev->mutex);
2560 if (!rdev->desc->ops->get_mode) {
2565 ret = rdev->desc->ops->get_mode(rdev);
2567 mutex_unlock(&rdev->mutex);
2572 * regulator_get_mode - get regulator operating mode
2573 * @regulator: regulator source
2575 * Get the current regulator operating mode.
2577 unsigned int regulator_get_mode(struct regulator *regulator)
2579 return _regulator_get_mode(regulator->rdev);
2581 EXPORT_SYMBOL_GPL(regulator_get_mode);
2584 * regulator_set_optimum_mode - set regulator optimum operating mode
2585 * @regulator: regulator source
2586 * @uA_load: load current
2588 * Notifies the regulator core of a new device load. This is then used by
2589 * DRMS (if enabled by constraints) to set the most efficient regulator
2590 * operating mode for the new regulator loading.
2592 * Consumer devices notify their supply regulator of the maximum power
2593 * they will require (can be taken from device datasheet in the power
2594 * consumption tables) when they change operational status and hence power
2595 * state. Examples of operational state changes that can affect power
2596 * consumption are :-
2598 * o Device is opened / closed.
2599 * o Device I/O is about to begin or has just finished.
2600 * o Device is idling in between work.
2602 * This information is also exported via sysfs to userspace.
2604 * DRMS will sum the total requested load on the regulator and change
2605 * to the most efficient operating mode if platform constraints allow.
2607 * Returns the new regulator mode or error.
2609 int regulator_set_optimum_mode(struct regulator *regulator, int uA_load)
2611 struct regulator_dev *rdev = regulator->rdev;
2612 struct regulator *consumer;
2613 int ret, output_uV, input_uV = 0, total_uA_load = 0;
2617 input_uV = regulator_get_voltage(rdev->supply);
2619 mutex_lock(&rdev->mutex);
2622 * first check to see if we can set modes at all, otherwise just
2623 * tell the consumer everything is OK.
2625 regulator->uA_load = uA_load;
2626 ret = regulator_check_drms(rdev);
2632 if (!rdev->desc->ops->get_optimum_mode)
2636 * we can actually do this so any errors are indicators of
2637 * potential real failure.
2641 if (!rdev->desc->ops->set_mode)
2644 /* get output voltage */
2645 output_uV = _regulator_get_voltage(rdev);
2646 if (output_uV <= 0) {
2647 rdev_err(rdev, "invalid output voltage found\n");
2651 /* No supply? Use constraint voltage */
2653 input_uV = rdev->constraints->input_uV;
2654 if (input_uV <= 0) {
2655 rdev_err(rdev, "invalid input voltage found\n");
2659 /* calc total requested load for this regulator */
2660 list_for_each_entry(consumer, &rdev->consumer_list, list)
2661 total_uA_load += consumer->uA_load;
2663 mode = rdev->desc->ops->get_optimum_mode(rdev,
2664 input_uV, output_uV,
2666 ret = regulator_mode_constrain(rdev, &mode);
2668 rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n",
2669 total_uA_load, input_uV, output_uV);
2673 ret = rdev->desc->ops->set_mode(rdev, mode);
2675 rdev_err(rdev, "failed to set optimum mode %x\n", mode);
2680 mutex_unlock(&rdev->mutex);
2683 EXPORT_SYMBOL_GPL(regulator_set_optimum_mode);
2686 * regulator_register_notifier - register regulator event notifier
2687 * @regulator: regulator source
2688 * @nb: notifier block
2690 * Register notifier block to receive regulator events.
2692 int regulator_register_notifier(struct regulator *regulator,
2693 struct notifier_block *nb)
2695 return blocking_notifier_chain_register(®ulator->rdev->notifier,
2698 EXPORT_SYMBOL_GPL(regulator_register_notifier);
2701 * regulator_unregister_notifier - unregister regulator event notifier
2702 * @regulator: regulator source
2703 * @nb: notifier block
2705 * Unregister regulator event notifier block.
2707 int regulator_unregister_notifier(struct regulator *regulator,
2708 struct notifier_block *nb)
2710 return blocking_notifier_chain_unregister(®ulator->rdev->notifier,
2713 EXPORT_SYMBOL_GPL(regulator_unregister_notifier);
2715 /* notify regulator consumers and downstream regulator consumers.
2716 * Note mutex must be held by caller.
2718 static void _notifier_call_chain(struct regulator_dev *rdev,
2719 unsigned long event, void *data)
2721 /* call rdev chain first */
2722 blocking_notifier_call_chain(&rdev->notifier, event, data);
2726 * regulator_bulk_get - get multiple regulator consumers
2728 * @dev: Device to supply
2729 * @num_consumers: Number of consumers to register
2730 * @consumers: Configuration of consumers; clients are stored here.
2732 * @return 0 on success, an errno on failure.
2734 * This helper function allows drivers to get several regulator
2735 * consumers in one operation. If any of the regulators cannot be
2736 * acquired then any regulators that were allocated will be freed
2737 * before returning to the caller.
2739 int regulator_bulk_get(struct device *dev, int num_consumers,
2740 struct regulator_bulk_data *consumers)
2745 for (i = 0; i < num_consumers; i++)
2746 consumers[i].consumer = NULL;
2748 for (i = 0; i < num_consumers; i++) {
2749 consumers[i].consumer = regulator_get(dev,
2750 consumers[i].supply);
2751 if (IS_ERR(consumers[i].consumer)) {
2752 ret = PTR_ERR(consumers[i].consumer);
2753 dev_err(dev, "Failed to get supply '%s': %d\n",
2754 consumers[i].supply, ret);
2755 consumers[i].consumer = NULL;
2764 regulator_put(consumers[i].consumer);
2768 EXPORT_SYMBOL_GPL(regulator_bulk_get);
2771 * devm_regulator_bulk_get - managed get multiple regulator consumers
2773 * @dev: Device to supply
2774 * @num_consumers: Number of consumers to register
2775 * @consumers: Configuration of consumers; clients are stored here.
2777 * @return 0 on success, an errno on failure.
2779 * This helper function allows drivers to get several regulator
2780 * consumers in one operation with management, the regulators will
2781 * automatically be freed when the device is unbound. If any of the
2782 * regulators cannot be acquired then any regulators that were
2783 * allocated will be freed before returning to the caller.
2785 int devm_regulator_bulk_get(struct device *dev, int num_consumers,
2786 struct regulator_bulk_data *consumers)
2791 for (i = 0; i < num_consumers; i++)
2792 consumers[i].consumer = NULL;
2794 for (i = 0; i < num_consumers; i++) {
2795 consumers[i].consumer = devm_regulator_get(dev,
2796 consumers[i].supply);
2797 if (IS_ERR(consumers[i].consumer)) {
2798 ret = PTR_ERR(consumers[i].consumer);
2799 dev_err(dev, "Failed to get supply '%s': %d\n",
2800 consumers[i].supply, ret);
2801 consumers[i].consumer = NULL;
2809 for (i = 0; i < num_consumers && consumers[i].consumer; i++)
2810 devm_regulator_put(consumers[i].consumer);
2814 EXPORT_SYMBOL_GPL(devm_regulator_bulk_get);
2816 static void regulator_bulk_enable_async(void *data, async_cookie_t cookie)
2818 struct regulator_bulk_data *bulk = data;
2820 bulk->ret = regulator_enable(bulk->consumer);
2824 * regulator_bulk_enable - enable multiple regulator consumers
2826 * @num_consumers: Number of consumers
2827 * @consumers: Consumer data; clients are stored here.
2828 * @return 0 on success, an errno on failure
2830 * This convenience API allows consumers to enable multiple regulator
2831 * clients in a single API call. If any consumers cannot be enabled
2832 * then any others that were enabled will be disabled again prior to
2835 int regulator_bulk_enable(int num_consumers,
2836 struct regulator_bulk_data *consumers)
2838 ASYNC_DOMAIN_EXCLUSIVE(async_domain);
2842 for (i = 0; i < num_consumers; i++) {
2843 if (consumers[i].consumer->always_on)
2844 consumers[i].ret = 0;
2846 async_schedule_domain(regulator_bulk_enable_async,
2847 &consumers[i], &async_domain);
2850 async_synchronize_full_domain(&async_domain);
2852 /* If any consumer failed we need to unwind any that succeeded */
2853 for (i = 0; i < num_consumers; i++) {
2854 if (consumers[i].ret != 0) {
2855 ret = consumers[i].ret;
2863 pr_err("Failed to enable %s: %d\n", consumers[i].supply, ret);
2865 regulator_disable(consumers[i].consumer);
2869 EXPORT_SYMBOL_GPL(regulator_bulk_enable);
2872 * regulator_bulk_disable - disable multiple regulator consumers
2874 * @num_consumers: Number of consumers
2875 * @consumers: Consumer data; clients are stored here.
2876 * @return 0 on success, an errno on failure
2878 * This convenience API allows consumers to disable multiple regulator
2879 * clients in a single API call. If any consumers cannot be disabled
2880 * then any others that were disabled will be enabled again prior to
2883 int regulator_bulk_disable(int num_consumers,
2884 struct regulator_bulk_data *consumers)
2889 for (i = num_consumers - 1; i >= 0; --i) {
2890 ret = regulator_disable(consumers[i].consumer);
2898 pr_err("Failed to disable %s: %d\n", consumers[i].supply, ret);
2899 for (++i; i < num_consumers; ++i) {
2900 r = regulator_enable(consumers[i].consumer);
2902 pr_err("Failed to reename %s: %d\n",
2903 consumers[i].supply, r);
2908 EXPORT_SYMBOL_GPL(regulator_bulk_disable);
2911 * regulator_bulk_force_disable - force disable multiple regulator consumers
2913 * @num_consumers: Number of consumers
2914 * @consumers: Consumer data; clients are stored here.
2915 * @return 0 on success, an errno on failure
2917 * This convenience API allows consumers to forcibly disable multiple regulator
2918 * clients in a single API call.
2919 * NOTE: This should be used for situations when device damage will
2920 * likely occur if the regulators are not disabled (e.g. over temp).
2921 * Although regulator_force_disable function call for some consumers can
2922 * return error numbers, the function is called for all consumers.
2924 int regulator_bulk_force_disable(int num_consumers,
2925 struct regulator_bulk_data *consumers)
2930 for (i = 0; i < num_consumers; i++)
2932 regulator_force_disable(consumers[i].consumer);
2934 for (i = 0; i < num_consumers; i++) {
2935 if (consumers[i].ret != 0) {
2936 ret = consumers[i].ret;
2945 EXPORT_SYMBOL_GPL(regulator_bulk_force_disable);
2948 * regulator_bulk_free - free multiple regulator consumers
2950 * @num_consumers: Number of consumers
2951 * @consumers: Consumer data; clients are stored here.
2953 * This convenience API allows consumers to free multiple regulator
2954 * clients in a single API call.
2956 void regulator_bulk_free(int num_consumers,
2957 struct regulator_bulk_data *consumers)
2961 for (i = 0; i < num_consumers; i++) {
2962 regulator_put(consumers[i].consumer);
2963 consumers[i].consumer = NULL;
2966 EXPORT_SYMBOL_GPL(regulator_bulk_free);
2969 * regulator_notifier_call_chain - call regulator event notifier
2970 * @rdev: regulator source
2971 * @event: notifier block
2972 * @data: callback-specific data.
2974 * Called by regulator drivers to notify clients a regulator event has
2975 * occurred. We also notify regulator clients downstream.
2976 * Note lock must be held by caller.
2978 int regulator_notifier_call_chain(struct regulator_dev *rdev,
2979 unsigned long event, void *data)
2981 _notifier_call_chain(rdev, event, data);
2985 EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
2988 * regulator_mode_to_status - convert a regulator mode into a status
2990 * @mode: Mode to convert
2992 * Convert a regulator mode into a status.
2994 int regulator_mode_to_status(unsigned int mode)
2997 case REGULATOR_MODE_FAST:
2998 return REGULATOR_STATUS_FAST;
2999 case REGULATOR_MODE_NORMAL:
3000 return REGULATOR_STATUS_NORMAL;
3001 case REGULATOR_MODE_IDLE:
3002 return REGULATOR_STATUS_IDLE;
3003 case REGULATOR_MODE_STANDBY:
3004 return REGULATOR_STATUS_STANDBY;
3006 return REGULATOR_STATUS_UNDEFINED;
3009 EXPORT_SYMBOL_GPL(regulator_mode_to_status);
3012 * To avoid cluttering sysfs (and memory) with useless state, only
3013 * create attributes that can be meaningfully displayed.
3015 static int add_regulator_attributes(struct regulator_dev *rdev)
3017 struct device *dev = &rdev->dev;
3018 struct regulator_ops *ops = rdev->desc->ops;
3021 /* some attributes need specific methods to be displayed */
3022 if ((ops->get_voltage && ops->get_voltage(rdev) >= 0) ||
3023 (ops->get_voltage_sel && ops->get_voltage_sel(rdev) >= 0)) {
3024 status = device_create_file(dev, &dev_attr_microvolts);
3028 if (ops->get_current_limit) {
3029 status = device_create_file(dev, &dev_attr_microamps);
3033 if (ops->get_mode) {
3034 status = device_create_file(dev, &dev_attr_opmode);
3038 if (ops->is_enabled) {
3039 status = device_create_file(dev, &dev_attr_state);
3043 if (ops->get_status) {
3044 status = device_create_file(dev, &dev_attr_status);
3049 /* some attributes are type-specific */
3050 if (rdev->desc->type == REGULATOR_CURRENT) {
3051 status = device_create_file(dev, &dev_attr_requested_microamps);
3056 /* all the other attributes exist to support constraints;
3057 * don't show them if there are no constraints, or if the
3058 * relevant supporting methods are missing.
3060 if (!rdev->constraints)
3063 /* constraints need specific supporting methods */
3064 if (ops->set_voltage || ops->set_voltage_sel) {
3065 status = device_create_file(dev, &dev_attr_min_microvolts);
3068 status = device_create_file(dev, &dev_attr_max_microvolts);
3072 if (ops->set_current_limit) {
3073 status = device_create_file(dev, &dev_attr_min_microamps);
3076 status = device_create_file(dev, &dev_attr_max_microamps);
3081 status = device_create_file(dev, &dev_attr_suspend_standby_state);
3084 status = device_create_file(dev, &dev_attr_suspend_mem_state);
3087 status = device_create_file(dev, &dev_attr_suspend_disk_state);
3091 if (ops->set_suspend_voltage) {
3092 status = device_create_file(dev,
3093 &dev_attr_suspend_standby_microvolts);
3096 status = device_create_file(dev,
3097 &dev_attr_suspend_mem_microvolts);
3100 status = device_create_file(dev,
3101 &dev_attr_suspend_disk_microvolts);
3106 if (ops->set_suspend_mode) {
3107 status = device_create_file(dev,
3108 &dev_attr_suspend_standby_mode);
3111 status = device_create_file(dev,
3112 &dev_attr_suspend_mem_mode);
3115 status = device_create_file(dev,
3116 &dev_attr_suspend_disk_mode);
3124 static void rdev_init_debugfs(struct regulator_dev *rdev)
3126 rdev->debugfs = debugfs_create_dir(rdev_get_name(rdev), debugfs_root);
3127 if (!rdev->debugfs) {
3128 rdev_warn(rdev, "Failed to create debugfs directory\n");
3132 debugfs_create_u32("use_count", 0444, rdev->debugfs,
3134 debugfs_create_u32("open_count", 0444, rdev->debugfs,
3139 * regulator_register - register regulator
3140 * @regulator_desc: regulator to register
3141 * @config: runtime configuration for regulator
3143 * Called by regulator drivers to register a regulator.
3144 * Returns 0 on success.
3146 struct regulator_dev *
3147 regulator_register(const struct regulator_desc *regulator_desc,
3148 const struct regulator_config *config)
3150 const struct regulation_constraints *constraints = NULL;
3151 const struct regulator_init_data *init_data;
3152 static atomic_t regulator_no = ATOMIC_INIT(0);
3153 struct regulator_dev *rdev;
3156 const char *supply = NULL;
3158 if (regulator_desc == NULL || config == NULL)
3159 return ERR_PTR(-EINVAL);
3164 if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
3165 return ERR_PTR(-EINVAL);
3167 if (regulator_desc->type != REGULATOR_VOLTAGE &&
3168 regulator_desc->type != REGULATOR_CURRENT)
3169 return ERR_PTR(-EINVAL);
3171 /* Only one of each should be implemented */
3172 WARN_ON(regulator_desc->ops->get_voltage &&
3173 regulator_desc->ops->get_voltage_sel);
3174 WARN_ON(regulator_desc->ops->set_voltage &&
3175 regulator_desc->ops->set_voltage_sel);
3177 /* If we're using selectors we must implement list_voltage. */
3178 if (regulator_desc->ops->get_voltage_sel &&
3179 !regulator_desc->ops->list_voltage) {
3180 return ERR_PTR(-EINVAL);
3182 if (regulator_desc->ops->set_voltage_sel &&
3183 !regulator_desc->ops->list_voltage) {
3184 return ERR_PTR(-EINVAL);
3187 init_data = config->init_data;
3189 rdev = kzalloc(sizeof(struct regulator_dev), GFP_KERNEL);
3191 return ERR_PTR(-ENOMEM);
3193 mutex_lock(®ulator_list_mutex);
3195 mutex_init(&rdev->mutex);
3196 rdev->reg_data = config->driver_data;
3197 rdev->owner = regulator_desc->owner;
3198 rdev->desc = regulator_desc;
3200 rdev->regmap = config->regmap;
3202 rdev->regmap = dev_get_regmap(dev, NULL);
3203 INIT_LIST_HEAD(&rdev->consumer_list);
3204 INIT_LIST_HEAD(&rdev->list);
3205 BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
3206 INIT_DELAYED_WORK(&rdev->disable_work, regulator_disable_work);
3208 /* preform any regulator specific init */
3209 if (init_data && init_data->regulator_init) {
3210 ret = init_data->regulator_init(rdev->reg_data);
3215 /* register with sysfs */
3216 rdev->dev.class = ®ulator_class;
3217 rdev->dev.of_node = config->of_node;
3218 rdev->dev.parent = dev;
3219 dev_set_name(&rdev->dev, "regulator.%d",
3220 atomic_inc_return(®ulator_no) - 1);
3221 ret = device_register(&rdev->dev);
3223 put_device(&rdev->dev);
3227 dev_set_drvdata(&rdev->dev, rdev);
3229 if (config->ena_gpio) {
3230 ret = gpio_request_one(config->ena_gpio,
3231 GPIOF_DIR_OUT | config->ena_gpio_flags,
3232 rdev_get_name(rdev));
3234 rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
3235 config->ena_gpio, ret);
3239 rdev->ena_gpio = config->ena_gpio;
3240 rdev->ena_gpio_invert = config->ena_gpio_invert;
3242 if (config->ena_gpio_flags & GPIOF_OUT_INIT_HIGH)
3243 rdev->ena_gpio_state = 1;
3245 if (rdev->ena_gpio_invert)
3246 rdev->ena_gpio_state = !rdev->ena_gpio_state;
3249 /* set regulator constraints */
3251 constraints = &init_data->constraints;
3253 ret = set_machine_constraints(rdev, constraints);
3257 /* add attributes supported by this regulator */
3258 ret = add_regulator_attributes(rdev);
3262 if (init_data && init_data->supply_regulator)
3263 supply = init_data->supply_regulator;
3264 else if (regulator_desc->supply_name)
3265 supply = regulator_desc->supply_name;
3268 struct regulator_dev *r;
3270 r = regulator_dev_lookup(dev, supply, &ret);
3273 dev_err(dev, "Failed to find supply %s\n", supply);
3274 ret = -EPROBE_DEFER;
3278 ret = set_supply(rdev, r);
3282 /* Enable supply if rail is enabled */
3283 if (_regulator_is_enabled(rdev)) {
3284 ret = regulator_enable(rdev->supply);
3290 /* add consumers devices */
3292 for (i = 0; i < init_data->num_consumer_supplies; i++) {
3293 ret = set_consumer_device_supply(rdev,
3294 init_data->consumer_supplies[i].dev_name,
3295 init_data->consumer_supplies[i].supply);
3297 dev_err(dev, "Failed to set supply %s\n",
3298 init_data->consumer_supplies[i].supply);
3299 goto unset_supplies;
3304 list_add(&rdev->list, ®ulator_list);
3306 rdev_init_debugfs(rdev);
3308 mutex_unlock(®ulator_list_mutex);
3312 unset_regulator_supplies(rdev);
3316 regulator_put(rdev->supply);
3318 gpio_free(rdev->ena_gpio);
3319 kfree(rdev->constraints);
3320 device_unregister(&rdev->dev);
3321 /* device core frees rdev */
3322 rdev = ERR_PTR(ret);
3327 rdev = ERR_PTR(ret);
3330 EXPORT_SYMBOL_GPL(regulator_register);
3333 * regulator_unregister - unregister regulator
3334 * @rdev: regulator to unregister
3336 * Called by regulator drivers to unregister a regulator.
3338 void regulator_unregister(struct regulator_dev *rdev)
3344 regulator_put(rdev->supply);
3345 mutex_lock(®ulator_list_mutex);
3346 debugfs_remove_recursive(rdev->debugfs);
3347 flush_work_sync(&rdev->disable_work.work);
3348 WARN_ON(rdev->open_count);
3349 unset_regulator_supplies(rdev);
3350 list_del(&rdev->list);
3351 kfree(rdev->constraints);
3353 gpio_free(rdev->ena_gpio);
3354 device_unregister(&rdev->dev);
3355 mutex_unlock(®ulator_list_mutex);
3357 EXPORT_SYMBOL_GPL(regulator_unregister);
3360 * regulator_suspend_prepare - prepare regulators for system wide suspend
3361 * @state: system suspend state
3363 * Configure each regulator with it's suspend operating parameters for state.
3364 * This will usually be called by machine suspend code prior to supending.
3366 int regulator_suspend_prepare(suspend_state_t state)
3368 struct regulator_dev *rdev;
3371 /* ON is handled by regulator active state */
3372 if (state == PM_SUSPEND_ON)
3375 mutex_lock(®ulator_list_mutex);
3376 list_for_each_entry(rdev, ®ulator_list, list) {
3378 mutex_lock(&rdev->mutex);
3379 ret = suspend_prepare(rdev, state);
3380 mutex_unlock(&rdev->mutex);
3383 rdev_err(rdev, "failed to prepare\n");
3388 mutex_unlock(®ulator_list_mutex);
3391 EXPORT_SYMBOL_GPL(regulator_suspend_prepare);
3394 * regulator_suspend_finish - resume regulators from system wide suspend
3396 * Turn on regulators that might be turned off by regulator_suspend_prepare
3397 * and that should be turned on according to the regulators properties.
3399 int regulator_suspend_finish(void)
3401 struct regulator_dev *rdev;
3404 mutex_lock(®ulator_list_mutex);
3405 list_for_each_entry(rdev, ®ulator_list, list) {
3406 struct regulator_ops *ops = rdev->desc->ops;
3408 mutex_lock(&rdev->mutex);
3409 if ((rdev->use_count > 0 || rdev->constraints->always_on) &&
3411 error = ops->enable(rdev);
3415 if (!has_full_constraints)
3419 if (!_regulator_is_enabled(rdev))
3422 error = ops->disable(rdev);
3427 mutex_unlock(&rdev->mutex);
3429 mutex_unlock(®ulator_list_mutex);
3432 EXPORT_SYMBOL_GPL(regulator_suspend_finish);
3435 * regulator_has_full_constraints - the system has fully specified constraints
3437 * Calling this function will cause the regulator API to disable all
3438 * regulators which have a zero use count and don't have an always_on
3439 * constraint in a late_initcall.
3441 * The intention is that this will become the default behaviour in a
3442 * future kernel release so users are encouraged to use this facility
3445 void regulator_has_full_constraints(void)
3447 has_full_constraints = 1;
3449 EXPORT_SYMBOL_GPL(regulator_has_full_constraints);
3452 * regulator_use_dummy_regulator - Provide a dummy regulator when none is found
3454 * Calling this function will cause the regulator API to provide a
3455 * dummy regulator to consumers if no physical regulator is found,
3456 * allowing most consumers to proceed as though a regulator were
3457 * configured. This allows systems such as those with software
3458 * controllable regulators for the CPU core only to be brought up more
3461 void regulator_use_dummy_regulator(void)
3463 board_wants_dummy_regulator = true;
3465 EXPORT_SYMBOL_GPL(regulator_use_dummy_regulator);
3468 * rdev_get_drvdata - get rdev regulator driver data
3471 * Get rdev regulator driver private data. This call can be used in the
3472 * regulator driver context.
3474 void *rdev_get_drvdata(struct regulator_dev *rdev)
3476 return rdev->reg_data;
3478 EXPORT_SYMBOL_GPL(rdev_get_drvdata);
3481 * regulator_get_drvdata - get regulator driver data
3482 * @regulator: regulator
3484 * Get regulator driver private data. This call can be used in the consumer
3485 * driver context when non API regulator specific functions need to be called.
3487 void *regulator_get_drvdata(struct regulator *regulator)
3489 return regulator->rdev->reg_data;
3491 EXPORT_SYMBOL_GPL(regulator_get_drvdata);
3494 * regulator_set_drvdata - set regulator driver data
3495 * @regulator: regulator
3498 void regulator_set_drvdata(struct regulator *regulator, void *data)
3500 regulator->rdev->reg_data = data;
3502 EXPORT_SYMBOL_GPL(regulator_set_drvdata);
3505 * regulator_get_id - get regulator ID
3508 int rdev_get_id(struct regulator_dev *rdev)
3510 return rdev->desc->id;
3512 EXPORT_SYMBOL_GPL(rdev_get_id);
3514 struct device *rdev_get_dev(struct regulator_dev *rdev)
3518 EXPORT_SYMBOL_GPL(rdev_get_dev);
3520 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
3522 return reg_init_data->driver_data;
3524 EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
3526 #ifdef CONFIG_DEBUG_FS
3527 static ssize_t supply_map_read_file(struct file *file, char __user *user_buf,
3528 size_t count, loff_t *ppos)
3530 char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
3531 ssize_t len, ret = 0;
3532 struct regulator_map *map;
3537 list_for_each_entry(map, ®ulator_map_list, list) {
3538 len = snprintf(buf + ret, PAGE_SIZE - ret,
3540 rdev_get_name(map->regulator), map->dev_name,
3544 if (ret > PAGE_SIZE) {
3550 ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
3558 static const struct file_operations supply_map_fops = {
3559 #ifdef CONFIG_DEBUG_FS
3560 .read = supply_map_read_file,
3561 .llseek = default_llseek,
3565 static int __init regulator_init(void)
3569 ret = class_register(®ulator_class);
3571 debugfs_root = debugfs_create_dir("regulator", NULL);
3573 pr_warn("regulator: Failed to create debugfs directory\n");
3575 debugfs_create_file("supply_map", 0444, debugfs_root, NULL,
3578 regulator_dummy_init();
3583 /* init early to allow our consumers to complete system booting */
3584 core_initcall(regulator_init);
3586 static int __init regulator_init_complete(void)
3588 struct regulator_dev *rdev;
3589 struct regulator_ops *ops;
3590 struct regulation_constraints *c;
3594 * Since DT doesn't provide an idiomatic mechanism for
3595 * enabling full constraints and since it's much more natural
3596 * with DT to provide them just assume that a DT enabled
3597 * system has full constraints.
3599 if (of_have_populated_dt())
3600 has_full_constraints = true;
3602 mutex_lock(®ulator_list_mutex);
3604 /* If we have a full configuration then disable any regulators
3605 * which are not in use or always_on. This will become the
3606 * default behaviour in the future.
3608 list_for_each_entry(rdev, ®ulator_list, list) {
3609 ops = rdev->desc->ops;
3610 c = rdev->constraints;
3612 if (!ops->disable || (c && c->always_on))
3615 mutex_lock(&rdev->mutex);
3617 if (rdev->use_count)
3620 /* If we can't read the status assume it's on. */
3621 if (ops->is_enabled)
3622 enabled = ops->is_enabled(rdev);
3629 if (has_full_constraints) {
3630 /* We log since this may kill the system if it
3632 rdev_info(rdev, "disabling\n");
3633 ret = ops->disable(rdev);
3635 rdev_err(rdev, "couldn't disable: %d\n", ret);
3638 /* The intention is that in future we will
3639 * assume that full constraints are provided
3640 * so warn even if we aren't going to do
3643 rdev_warn(rdev, "incomplete constraints, leaving on\n");
3647 mutex_unlock(&rdev->mutex);
3650 mutex_unlock(®ulator_list_mutex);
3654 late_initcall(regulator_init_complete);