isci: unify port reset, add_phy, and remove_phy handlers

[firefly-linux-kernel-4.4.55.git] / drivers / scsi / isci / port.c

/*
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * BSD LICENSE
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *   * Redistributions in binary form must reproduce the above copyright
 *     notice, this list of conditions and the following disclaimer in
 *     the documentation and/or other materials provided with the
 *     distribution.
 *   * Neither the name of Intel Corporation nor the names of its
 *     contributors may be used to endorse or promote products derived
 *     from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "isci.h"
#include "port.h"
#include "request.h"
#include "timers.h"

#define SCIC_SDS_PORT_HARD_RESET_TIMEOUT  (1000)
#define SCU_DUMMY_INDEX    (0xFFFF)

static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[];

static void isci_port_change_state(struct isci_port *iport, enum isci_status status)
{
        unsigned long flags;

        dev_dbg(&iport->isci_host->pdev->dev,
                "%s: iport = %p, state = 0x%x\n",
                __func__, iport, status);

        /* XXX pointless lock */
        spin_lock_irqsave(&iport->state_lock, flags);
        iport->status = status;
        spin_unlock_irqrestore(&iport->state_lock, flags);
}

/*
 * This function will indicate which protocols are supported by this port.
 * @sci_port: a handle corresponding to the SAS port for which to return the
 *    supported protocols.
 * @protocols: This parameter specifies a pointer to a data structure
 *    which the core will copy the protocol values for the port from the
 *    transmit_identification register.
 */
static void
scic_sds_port_get_protocols(struct scic_sds_port *sci_port,
                            struct scic_phy_proto *protocols)
{
        u8 index;

        protocols->all = 0;

        for (index = 0; index < SCI_MAX_PHYS; index++) {
                if (sci_port->phy_table[index] != NULL) {
                        scic_sds_phy_get_protocols(sci_port->phy_table[index],
                                                   protocols);
                }
        }
}

/**
 * This method requests a list (mask) of the phys contained in the supplied SAS
 *    port.
 * @sci_port: a handle corresponding to the SAS port for which to return the
 *    phy mask.
 *
 * Return a bit mask indicating which phys are a part of this port. Each bit
 * corresponds to a phy identifier (e.g. bit 0 = phy id 0).
 */
static u32 scic_sds_port_get_phys(struct scic_sds_port *sci_port)
{
        u32 index;
        u32 mask;

        mask = 0;

        for (index = 0; index < SCI_MAX_PHYS; index++) {
                if (sci_port->phy_table[index] != NULL) {
                        mask |= (1 << index);
                }
        }

        return mask;
}

/**
 * scic_port_get_properties() - This method simply returns the properties
 *    regarding the port, such as: physical index, protocols, sas address, etc.
 * @port: this parameter specifies the port for which to retrieve the physical
 *    index.
 * @properties: This parameter specifies the properties structure into which to
 *    copy the requested information.
 *
 * Indicate if the user specified a valid port. SCI_SUCCESS This value is
 * returned if the specified port was valid. SCI_FAILURE_INVALID_PORT This
 * value is returned if the specified port is not valid.  When this value is
 * returned, no data is copied to the properties output parameter.
 */
static enum sci_status scic_port_get_properties(struct scic_sds_port *port,
                                                struct scic_port_properties *prop)
{
        if ((port == NULL) ||
            (port->logical_port_index == SCIC_SDS_DUMMY_PORT))
                return SCI_FAILURE_INVALID_PORT;

        prop->index    = port->logical_port_index;
        prop->phy_mask = scic_sds_port_get_phys(port);
        scic_sds_port_get_sas_address(port, &prop->local.sas_address);
        scic_sds_port_get_protocols(port, &prop->local.protocols);
        scic_sds_port_get_attached_sas_address(port, &prop->remote.sas_address);

        return SCI_SUCCESS;
}

static void isci_port_link_up(struct isci_host *isci_host,
                              struct scic_sds_port *port,
                              struct scic_sds_phy *phy)
{
        unsigned long flags;
        struct scic_port_properties properties;
        struct isci_phy *isci_phy = sci_phy_to_iphy(phy);
        struct isci_port *isci_port = sci_port_to_iport(port);
        unsigned long success = true;

        BUG_ON(isci_phy->isci_port != NULL);

        isci_phy->isci_port = isci_port;

        dev_dbg(&isci_host->pdev->dev,
                "%s: isci_port = %p\n",
                __func__, isci_port);

        spin_lock_irqsave(&isci_phy->sas_phy.frame_rcvd_lock, flags);

        isci_port_change_state(isci_phy->isci_port, isci_starting);

        scic_port_get_properties(port, &properties);

        if (phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) {
                u64 attached_sas_address;

                isci_phy->sas_phy.oob_mode = SATA_OOB_MODE;
                isci_phy->sas_phy.frame_rcvd_size = sizeof(struct dev_to_host_fis);

                /*
                 * For direct-attached SATA devices, the SCI core will
                 * automagically assign a SAS address to the end device
                 * for the purpose of creating a port. This SAS address
                 * will not be the same as assigned to the PHY and needs
                 * to be obtained from struct scic_port_properties properties.
                 */
                attached_sas_address = properties.remote.sas_address.high;
                attached_sas_address <<= 32;
                attached_sas_address |= properties.remote.sas_address.low;
                swab64s(&attached_sas_address);

                memcpy(&isci_phy->sas_phy.attached_sas_addr,
                       &attached_sas_address, sizeof(attached_sas_address));
        } else if (phy->protocol == SCIC_SDS_PHY_PROTOCOL_SAS) {
                isci_phy->sas_phy.oob_mode = SAS_OOB_MODE;
                isci_phy->sas_phy.frame_rcvd_size = sizeof(struct sas_identify_frame);

                /* Copy the attached SAS address from the IAF */
                memcpy(isci_phy->sas_phy.attached_sas_addr,
                       isci_phy->frame_rcvd.iaf.sas_addr, SAS_ADDR_SIZE);
        } else {
                dev_err(&isci_host->pdev->dev, "%s: unkown target\n", __func__);
                success = false;
        }

        isci_phy->sas_phy.phy->negotiated_linkrate = sci_phy_linkrate(phy);

        spin_unlock_irqrestore(&isci_phy->sas_phy.frame_rcvd_lock, flags);

        /* Notify libsas that we have an address frame, if indeed
         * we've found an SSP, SMP, or STP target */
        if (success)
                isci_host->sas_ha.notify_port_event(&isci_phy->sas_phy,
                                                    PORTE_BYTES_DMAED);
}


/**
 * isci_port_link_down() - This function is called by the sci core when a link
 *    becomes inactive.
 * @isci_host: This parameter specifies the isci host object.
 * @phy: This parameter specifies the isci phy with the active link.
 * @port: This parameter specifies the isci port with the active link.
 *
 */
static void isci_port_link_down(struct isci_host *isci_host,
                                struct isci_phy *isci_phy,
                                struct isci_port *isci_port)
{
        struct isci_remote_device *isci_device;

        dev_dbg(&isci_host->pdev->dev,
                "%s: isci_port = %p\n", __func__, isci_port);

        if (isci_port) {

                /* check to see if this is the last phy on this port. */
                if (isci_phy->sas_phy.port
                    && isci_phy->sas_phy.port->num_phys == 1) {

                        /* change the state for all devices on this port.
                         * The next task sent to this device will be returned
                         * as SAS_TASK_UNDELIVERED, and the scsi mid layer
                         * will remove the target
                         */
                        list_for_each_entry(isci_device,
                                            &isci_port->remote_dev_list,
                                            node) {
                                dev_dbg(&isci_host->pdev->dev,
                                        "%s: isci_device = %p\n",
                                        __func__, isci_device);
                                isci_remote_device_change_state(isci_device,
                                                                isci_stopping);
                        }
                }
                isci_port_change_state(isci_port, isci_stopping);
        }

        /* Notify libsas of the borken link, this will trigger calls to our
         * isci_port_deformed and isci_dev_gone functions.
         */
        sas_phy_disconnected(&isci_phy->sas_phy);
        isci_host->sas_ha.notify_phy_event(&isci_phy->sas_phy,
                                           PHYE_LOSS_OF_SIGNAL);

        isci_phy->isci_port = NULL;

        dev_dbg(&isci_host->pdev->dev,
                "%s: isci_port = %p - Done\n", __func__, isci_port);
}


/**
 * isci_port_ready() - This function is called by the sci core when a link
 *    becomes ready.
 * @isci_host: This parameter specifies the isci host object.
 * @port: This parameter specifies the sci port with the active link.
 *
 */
static void isci_port_ready(struct isci_host *isci_host, struct isci_port *isci_port)
{
        dev_dbg(&isci_host->pdev->dev,
                "%s: isci_port = %p\n", __func__, isci_port);

        complete_all(&isci_port->start_complete);
        isci_port_change_state(isci_port, isci_ready);
        return;
}

/**
 * isci_port_not_ready() - This function is called by the sci core when a link
 *    is not ready. All remote devices on this link will be removed if they are
 *    in the stopping state.
 * @isci_host: This parameter specifies the isci host object.
 * @port: This parameter specifies the sci port with the active link.
 *
 */
static void isci_port_not_ready(struct isci_host *isci_host, struct isci_port *isci_port)
{
        dev_dbg(&isci_host->pdev->dev,
                "%s: isci_port = %p\n", __func__, isci_port);
}

static void isci_port_stop_complete(struct scic_sds_controller *scic,
                                    struct scic_sds_port *sci_port,
                                    enum sci_status completion_status)
{
        dev_dbg(&scic_to_ihost(scic)->pdev->dev, "Port stop complete\n");
}

/**
 * isci_port_hard_reset_complete() - This function is called by the sci core
 *    when the hard reset complete notification has been received.
 * @port: This parameter specifies the sci port with the active link.
 * @completion_status: This parameter specifies the core status for the reset
 *    process.
 *
 */
static void isci_port_hard_reset_complete(struct isci_port *isci_port,
                                          enum sci_status completion_status)
{
        dev_dbg(&isci_port->isci_host->pdev->dev,
                "%s: isci_port = %p, completion_status=%x\n",
                     __func__, isci_port, completion_status);

        /* Save the status of the hard reset from the port. */
        isci_port->hard_reset_status = completion_status;

        complete_all(&isci_port->hard_reset_complete);
}

/* This method will return a true value if the specified phy can be assigned to
 * this port The following is a list of phys for each port that are allowed: -
 * Port 0 - 3 2 1 0 - Port 1 -     1 - Port 2 - 3 2 - Port 3 - 3 This method
 * doesn't preclude all configurations.  It merely ensures that a phy is part
 * of the allowable set of phy identifiers for that port.  For example, one
 * could assign phy 3 to port 0 and no other phys.  Please refer to
 * scic_sds_port_is_phy_mask_valid() for information regarding whether the
 * phy_mask for a port can be supported. bool true if this is a valid phy
 * assignment for the port false if this is not a valid phy assignment for the
 * port
 */
bool scic_sds_port_is_valid_phy_assignment(struct scic_sds_port *sci_port,
                                           u32 phy_index)
{
        /* Initialize to invalid value. */
        u32 existing_phy_index = SCI_MAX_PHYS;
        u32 index;

        if ((sci_port->physical_port_index == 1) && (phy_index != 1)) {
                return false;
        }

        if (sci_port->physical_port_index == 3 && phy_index != 3) {
                return false;
        }

        if (
                (sci_port->physical_port_index == 2)
                && ((phy_index == 0) || (phy_index == 1))
                ) {
                return false;
        }

        for (index = 0; index < SCI_MAX_PHYS; index++) {
                if ((sci_port->phy_table[index] != NULL)
                    && (index != phy_index)) {
                        existing_phy_index = index;
                }
        }

        /*
         * Ensure that all of the phys in the port are capable of
         * operating at the same maximum link rate. */
        if (
                (existing_phy_index < SCI_MAX_PHYS)
                && (sci_port->owning_controller->user_parameters.sds1.phys[
                            phy_index].max_speed_generation !=
                    sci_port->owning_controller->user_parameters.sds1.phys[
                            existing_phy_index].max_speed_generation)
                )
                return false;

        return true;
}

/**
 *
 * @sci_port: This is the port object for which to determine if the phy mask
 *    can be supported.
 *
 * This method will return a true value if the port's phy mask can be supported
 * by the SCU. The following is a list of valid PHY mask configurations for
 * each port: - Port 0 - [[3  2] 1] 0 - Port 1 -        [1] - Port 2 - [[3] 2]
 * - Port 3 -  [3] This method returns a boolean indication specifying if the
 * phy mask can be supported. true if this is a valid phy assignment for the
 * port false if this is not a valid phy assignment for the port
 */
static bool scic_sds_port_is_phy_mask_valid(
        struct scic_sds_port *sci_port,
        u32 phy_mask)
{
        if (sci_port->physical_port_index == 0) {
                if (((phy_mask & 0x0F) == 0x0F)
                    || ((phy_mask & 0x03) == 0x03)
                    || ((phy_mask & 0x01) == 0x01)
                    || (phy_mask == 0))
                        return true;
        } else if (sci_port->physical_port_index == 1) {
                if (((phy_mask & 0x02) == 0x02)
                    || (phy_mask == 0))
                        return true;
        } else if (sci_port->physical_port_index == 2) {
                if (((phy_mask & 0x0C) == 0x0C)
                    || ((phy_mask & 0x04) == 0x04)
                    || (phy_mask == 0))
                        return true;
        } else if (sci_port->physical_port_index == 3) {
                if (((phy_mask & 0x08) == 0x08)
                    || (phy_mask == 0))
                        return true;
        }

        return false;
}

/**
 *
 * @sci_port: This parameter specifies the port from which to return a
 *    connected phy.
 *
 * This method retrieves a currently active (i.e. connected) phy contained in
 * the port.  Currently, the lowest order phy that is connected is returned.
 * This method returns a pointer to a SCIS_SDS_PHY object. NULL This value is
 * returned if there are no currently active (i.e. connected to a remote end
 * point) phys contained in the port. All other values specify a struct scic_sds_phy
 * object that is active in the port.
 */
static struct scic_sds_phy *scic_sds_port_get_a_connected_phy(
        struct scic_sds_port *sci_port
        ) {
        u32 index;
        struct scic_sds_phy *phy;

        for (index = 0; index < SCI_MAX_PHYS; index++) {
                /*
                 * Ensure that the phy is both part of the port and currently
                 * connected to the remote end-point. */
                phy = sci_port->phy_table[index];
                if (
                        (phy != NULL)
                        && scic_sds_port_active_phy(sci_port, phy)
                        ) {
                        return phy;
                }
        }

        return NULL;
}

/**
 * scic_sds_port_set_phy() -
 * @out]: port The port object to which the phy assignement is being made.
 * @out]: phy The phy which is being assigned to the port.
 *
 * This method attempts to make the assignment of the phy to the port. If
 * successful the phy is assigned to the ports phy table. bool true if the phy
 * assignment can be made. false if the phy assignement can not be made. This
 * is a functional test that only fails if the phy is currently assigned to a
 * different port.
 */
static enum sci_status scic_sds_port_set_phy(
        struct scic_sds_port *port,
        struct scic_sds_phy *phy)
{
        /*
         * Check to see if we can add this phy to a port
         * that means that the phy is not part of a port and that the port does
         * not already have a phy assinged to the phy index. */
        if (
                (port->phy_table[phy->phy_index] == NULL)
                && (phy_get_non_dummy_port(phy) == NULL)
                && scic_sds_port_is_valid_phy_assignment(port, phy->phy_index)
                ) {
                /*
                 * Phy is being added in the stopped state so we are in MPC mode
                 * make logical port index = physical port index */
                port->logical_port_index = port->physical_port_index;
                port->phy_table[phy->phy_index] = phy;
                scic_sds_phy_set_port(phy, port);

                return SCI_SUCCESS;
        }

        return SCI_FAILURE;
}

/**
 * scic_sds_port_clear_phy() -
 * @out]: port The port from which the phy is being cleared.
 * @out]: phy The phy being cleared from the port.
 *
 * This method will clear the phy assigned to this port.  This method fails if
 * this phy is not currently assinged to this port. bool true if the phy is
 * removed from the port. false if this phy is not assined to this port.
 */
static enum sci_status scic_sds_port_clear_phy(
        struct scic_sds_port *port,
        struct scic_sds_phy *phy)
{
        /* Make sure that this phy is part of this port */
        if (port->phy_table[phy->phy_index] == phy &&
            phy_get_non_dummy_port(phy) == port) {
                struct scic_sds_controller *scic = port->owning_controller;
                struct isci_host *ihost = scic_to_ihost(scic);

                /* Yep it is assigned to this port so remove it */
                scic_sds_phy_set_port(phy, &ihost->ports[SCI_MAX_PORTS].sci);
                port->phy_table[phy->phy_index] = NULL;
                return SCI_SUCCESS;
        }

        return SCI_FAILURE;
}


/**
 * This method requests the SAS address for the supplied SAS port from the SCI
 *    implementation.
 * @sci_port: a handle corresponding to the SAS port for which to return the
 *    SAS address.
 * @sas_address: This parameter specifies a pointer to a SAS address structure
 *    into which the core will copy the SAS address for the port.
 *
 */
void scic_sds_port_get_sas_address(
        struct scic_sds_port *sci_port,
        struct sci_sas_address *sas_address)
{
        u32 index;

        sas_address->high = 0;
        sas_address->low  = 0;

        for (index = 0; index < SCI_MAX_PHYS; index++) {
                if (sci_port->phy_table[index] != NULL) {
                        scic_sds_phy_get_sas_address(sci_port->phy_table[index], sas_address);
                }
        }
}

/*
 * This function requests the SAS address for the device directly attached to
 *    this SAS port.
 * @sci_port: a handle corresponding to the SAS port for which to return the
 *    SAS address.
 * @sas_address: This parameter specifies a pointer to a SAS address structure
 *    into which the core will copy the SAS address for the device directly
 *    attached to the port.
 *
 */
void scic_sds_port_get_attached_sas_address(
        struct scic_sds_port *sci_port,
        struct sci_sas_address *sas_address)
{
        struct scic_sds_phy *sci_phy;

        /*
         * Ensure that the phy is both part of the port and currently
         * connected to the remote end-point.
         */
        sci_phy = scic_sds_port_get_a_connected_phy(sci_port);
        if (sci_phy) {
                if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA) {
                        scic_sds_phy_get_attached_sas_address(sci_phy,
                                                              sas_address);
                } else {
                        scic_sds_phy_get_sas_address(sci_phy, sas_address);
                        sas_address->low += sci_phy->phy_index;
                }
        } else {
                sas_address->high = 0;
                sas_address->low  = 0;
        }
}

/**
 * scic_sds_port_construct_dummy_rnc() - create dummy rnc for si workaround
 *
 * @sci_port: logical port on which we need to create the remote node context
 * @rni: remote node index for this remote node context.
 *
 * This routine will construct a dummy remote node context data structure
 * This structure will be posted to the hardware to work around a scheduler
 * error in the hardware.
 */
static void scic_sds_port_construct_dummy_rnc(struct scic_sds_port *sci_port, u16 rni)
{
        union scu_remote_node_context *rnc;

        rnc = &sci_port->owning_controller->remote_node_context_table[rni];

        memset(rnc, 0, sizeof(union scu_remote_node_context));

        rnc->ssp.remote_sas_address_hi = 0;
        rnc->ssp.remote_sas_address_lo = 0;

        rnc->ssp.remote_node_index = rni;
        rnc->ssp.remote_node_port_width = 1;
        rnc->ssp.logical_port_index = sci_port->physical_port_index;

        rnc->ssp.nexus_loss_timer_enable = false;
        rnc->ssp.check_bit = false;
        rnc->ssp.is_valid = true;
        rnc->ssp.is_remote_node_context = true;
        rnc->ssp.function_number = 0;
        rnc->ssp.arbitration_wait_time = 0;
}

/**
 * scic_sds_port_construct_dummy_task() - create dummy task for si workaround
 * @sci_port The logical port on which we need to create the
 *            remote node context.
 *            context.
 * @tci The remote node index for this remote node context.
 *
 * This routine will construct a dummy task context data structure.  This
 * structure will be posted to the hardwre to work around a scheduler error
 * in the hardware.
 *
 */
static void scic_sds_port_construct_dummy_task(struct scic_sds_port *sci_port, u16 tci)
{
        struct scu_task_context *task_context;

        task_context = scic_sds_controller_get_task_context_buffer(sci_port->owning_controller, tci);

        memset(task_context, 0, sizeof(struct scu_task_context));

        task_context->abort = 0;
        task_context->priority = 0;
        task_context->initiator_request = 1;
        task_context->connection_rate = 1;
        task_context->protocol_engine_index = 0;
        task_context->logical_port_index = sci_port->physical_port_index;
        task_context->protocol_type = SCU_TASK_CONTEXT_PROTOCOL_SSP;
        task_context->task_index = scic_sds_io_tag_get_index(tci);
        task_context->valid = SCU_TASK_CONTEXT_VALID;
        task_context->context_type = SCU_TASK_CONTEXT_TYPE;

        task_context->remote_node_index = sci_port->reserved_rni;
        task_context->command_code = 0;

        task_context->link_layer_control = 0;
        task_context->do_not_dma_ssp_good_response = 1;
        task_context->strict_ordering = 0;
        task_context->control_frame = 0;
        task_context->timeout_enable = 0;
        task_context->block_guard_enable = 0;

        task_context->address_modifier = 0;

        task_context->task_phase = 0x01;
}

static void scic_sds_port_destroy_dummy_resources(struct scic_sds_port *sci_port)
{
        struct scic_sds_controller *scic = sci_port->owning_controller;

        if (sci_port->reserved_tci != SCU_DUMMY_INDEX)
                scic_controller_free_io_tag(scic, sci_port->reserved_tci);

        if (sci_port->reserved_rni != SCU_DUMMY_INDEX)
                scic_sds_remote_node_table_release_remote_node_index(&scic->available_remote_nodes,
                                                                     1, sci_port->reserved_rni);

        sci_port->reserved_rni = SCU_DUMMY_INDEX;
        sci_port->reserved_tci = SCU_DUMMY_INDEX;
}

/**
 * This method performs initialization of the supplied port. Initialization
 *    includes: - state machine initialization - member variable initialization
 *    - configuring the phy_mask
 * @sci_port:
 * @transport_layer_registers:
 * @port_task_scheduler_registers:
 * @port_configuration_regsiter:
 *
 * enum sci_status SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION This value is returned
 * if the phy being added to the port
 */
enum sci_status scic_sds_port_initialize(
        struct scic_sds_port *sci_port,
        void __iomem *port_task_scheduler_registers,
        void __iomem *port_configuration_regsiter,
        void __iomem *viit_registers)
{
        sci_port->port_task_scheduler_registers  = port_task_scheduler_registers;
        sci_port->port_pe_configuration_register = port_configuration_regsiter;
        sci_port->viit_registers                 = viit_registers;

        return SCI_SUCCESS;
}


/**
 * This method assigns the direct attached device ID for this port.
 *
 * @param[in] sci_port The port for which the direct attached device id is to
 *       be assigned.
 * @param[in] device_id The direct attached device ID to assign to the port.
 *       This will be the RNi for the device
 */
void scic_sds_port_setup_transports(
        struct scic_sds_port *sci_port,
        u32 device_id)
{
        u8 index;

        for (index = 0; index < SCI_MAX_PHYS; index++) {
                if (sci_port->active_phy_mask & (1 << index))
                        scic_sds_phy_setup_transport(sci_port->phy_table[index], device_id);
        }
}

/**
 *
 * @sci_port: This is the port on which the phy should be enabled.
 * @sci_phy: This is the specific phy which to enable.
 * @do_notify_user: This parameter specifies whether to inform the user (via
 *    scic_cb_port_link_up()) as to the fact that a new phy as become ready.
 *
 * This function will activate the phy in the port.
 * Activation includes: - adding
 * the phy to the port - enabling the Protocol Engine in the silicon. -
 * notifying the user that the link is up. none
 */
static void scic_sds_port_activate_phy(struct scic_sds_port *sci_port,
                                       struct scic_sds_phy *sci_phy,
                                       bool do_notify_user)
{
        struct scic_sds_controller *scic = sci_port->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);

        if (sci_phy->protocol != SCIC_SDS_PHY_PROTOCOL_SATA)
                scic_sds_phy_resume(sci_phy);

        sci_port->active_phy_mask |= 1 << sci_phy->phy_index;

        scic_sds_controller_clear_invalid_phy(scic, sci_phy);

        if (do_notify_user == true)
                isci_port_link_up(ihost, sci_port, sci_phy);
}

void scic_sds_port_deactivate_phy(struct scic_sds_port *sci_port,
                                  struct scic_sds_phy *sci_phy,
                                  bool do_notify_user)
{
        struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port);
        struct isci_port *iport = sci_port_to_iport(sci_port);
        struct isci_host *ihost = scic_to_ihost(scic);
        struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);

        sci_port->active_phy_mask &= ~(1 << sci_phy->phy_index);

        sci_phy->max_negotiated_speed = SAS_LINK_RATE_UNKNOWN;

        /* Re-assign the phy back to the LP as if it were a narrow port */
        writel(sci_phy->phy_index,
                &sci_port->port_pe_configuration_register[sci_phy->phy_index]);

        if (do_notify_user == true)
                isci_port_link_down(ihost, iphy, iport);
}

/**
 *
 * @sci_port: This is the port on which the phy should be disabled.
 * @sci_phy: This is the specific phy which to disabled.
 *
 * This function will disable the phy and report that the phy is not valid for
 * this port object. None
 */
static void scic_sds_port_invalid_link_up(struct scic_sds_port *sci_port,
                                          struct scic_sds_phy *sci_phy)
{
        struct scic_sds_controller *scic = sci_port->owning_controller;

        /*
         * Check to see if we have alreay reported this link as bad and if
         * not go ahead and tell the SCI_USER that we have discovered an
         * invalid link.
         */
        if ((scic->invalid_phy_mask & (1 << sci_phy->phy_index)) == 0) {
                scic_sds_controller_set_invalid_phy(scic, sci_phy);
                dev_warn(&scic_to_ihost(scic)->pdev->dev, "Invalid link up!\n");
        }
}

static bool is_port_ready_state(enum scic_sds_port_states state)
{
        switch (state) {
        case SCI_BASE_PORT_STATE_READY:
        case SCIC_SDS_PORT_READY_SUBSTATE_WAITING:
        case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL:
        case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING:
                return true;
        default:
                return false;
        }
}

/* flag dummy rnc hanling when exiting a ready state */
static void port_state_machine_change(struct scic_sds_port *sci_port,
                                      enum scic_sds_port_states state)
{
        struct sci_base_state_machine *sm = &sci_port->state_machine;
        enum scic_sds_port_states old_state = sm->current_state_id;

        if (is_port_ready_state(old_state) && !is_port_ready_state(state))
                sci_port->ready_exit = true;

        sci_base_state_machine_change_state(sm, state);
        sci_port->ready_exit = false;
}

/**
 * scic_sds_port_general_link_up_handler - phy can be assigned to port?
 * @sci_port: scic_sds_port object for which has a phy that has gone link up.
 * @sci_phy: This is the struct scic_sds_phy object that has gone link up.
 * @do_notify_user: This parameter specifies whether to inform the user (via
 *    scic_cb_port_link_up()) as to the fact that a new phy as become ready.
 *
 * Determine if this phy can be assigned to this
 * port . If the phy is not a valid PHY for
 * this port then the function will notify the user. A PHY can only be
 * part of a port if it's attached SAS ADDRESS is the same as all other PHYs in
 * the same port. none
 */
static void scic_sds_port_general_link_up_handler(struct scic_sds_port *sci_port,
                                                  struct scic_sds_phy *sci_phy,
                                                  bool do_notify_user)
{
        struct sci_sas_address port_sas_address;
        struct sci_sas_address phy_sas_address;

        scic_sds_port_get_attached_sas_address(sci_port, &port_sas_address);
        scic_sds_phy_get_attached_sas_address(sci_phy, &phy_sas_address);

        /* If the SAS address of the new phy matches the SAS address of
         * other phys in the port OR this is the first phy in the port,
         * then activate the phy and allow it to be used for operations
         * in this port.
         */
        if ((phy_sas_address.high == port_sas_address.high &&
             phy_sas_address.low  == port_sas_address.low) ||
            sci_port->active_phy_mask == 0) {
                struct sci_base_state_machine *sm = &sci_port->state_machine;

                scic_sds_port_activate_phy(sci_port, sci_phy, do_notify_user);
                if (sm->current_state_id == SCI_BASE_PORT_STATE_RESETTING)
                        port_state_machine_change(sci_port, SCI_BASE_PORT_STATE_READY);
        } else
                scic_sds_port_invalid_link_up(sci_port, sci_phy);
}



/**
 * This method returns false if the port only has a single phy object assigned.
 *     If there are no phys or more than one phy then the method will return
 *    true.
 * @sci_port: The port for which the wide port condition is to be checked.
 *
 * bool true Is returned if this is a wide ported port. false Is returned if
 * this is a narrow port.
 */
static bool scic_sds_port_is_wide(struct scic_sds_port *sci_port)
{
        u32 index;
        u32 phy_count = 0;

        for (index = 0; index < SCI_MAX_PHYS; index++) {
                if (sci_port->phy_table[index] != NULL) {
                        phy_count++;
                }
        }

        return phy_count != 1;
}

/**
 * This method is called by the PHY object when the link is detected. if the
 *    port wants the PHY to continue on to the link up state then the port
 *    layer must return true.  If the port object returns false the phy object
 *    must halt its attempt to go link up.
 * @sci_port: The port associated with the phy object.
 * @sci_phy: The phy object that is trying to go link up.
 *
 * true if the phy object can continue to the link up condition. true Is
 * returned if this phy can continue to the ready state. false Is returned if
 * can not continue on to the ready state. This notification is in place for
 * wide ports and direct attached phys.  Since there are no wide ported SATA
 * devices this could become an invalid port configuration.
 */
bool scic_sds_port_link_detected(
        struct scic_sds_port *sci_port,
        struct scic_sds_phy *sci_phy)
{
        if ((sci_port->logical_port_index != SCIC_SDS_DUMMY_PORT) &&
            (sci_phy->protocol == SCIC_SDS_PHY_PROTOCOL_SATA) &&
            scic_sds_port_is_wide(sci_port)) {
                scic_sds_port_invalid_link_up(sci_port, sci_phy);

                return false;
        }

        return true;
}

/**
 * This method is the entry point for the phy to inform the port that it is now
 *    in a ready state
 * @sci_port:
 *
 *
 */
void scic_sds_port_link_up(
        struct scic_sds_port *sci_port,
        struct scic_sds_phy *sci_phy)
{
        sci_phy->is_in_link_training = false;

        sci_port->state_handlers->link_up_handler(sci_port, sci_phy);
}

/**
 * This method is the entry point for the phy to inform the port that it is no
 *    longer in a ready state
 * @sci_port:
 *
 *
 */
void scic_sds_port_link_down(
        struct scic_sds_port *sci_port,
        struct scic_sds_phy *sci_phy)
{
        sci_port->state_handlers->link_down_handler(sci_port, sci_phy);
}

/**
 * This method is called to start an IO request on this port.
 * @sci_port:
 * @sci_dev:
 * @sci_req:
 *
 * enum sci_status
 */
enum sci_status scic_sds_port_start_io(
        struct scic_sds_port *sci_port,
        struct scic_sds_remote_device *sci_dev,
        struct scic_sds_request *sci_req)
{
        return sci_port->state_handlers->start_io_handler(
                       sci_port, sci_dev, sci_req);
}

/**
 * This method is called to complete an IO request to the port.
 * @sci_port:
 * @sci_dev:
 * @sci_req:
 *
 * enum sci_status
 */
enum sci_status scic_sds_port_complete_io(
        struct scic_sds_port *sci_port,
        struct scic_sds_remote_device *sci_dev,
        struct scic_sds_request *sci_req)
{
        return sci_port->state_handlers->complete_io_handler(
                       sci_port, sci_dev, sci_req);
}

/**
 * This method is provided to timeout requests for port operations. Mostly its
 *    for the port reset operation.
 *
 *
 */
static void scic_sds_port_timeout_handler(void *port)
{
        struct scic_sds_port *sci_port = port;
        u32 current_state;

        current_state = sci_base_state_machine_get_state(&sci_port->state_machine);

        if (current_state == SCI_BASE_PORT_STATE_RESETTING) {
                /* if the port is still in the resetting state then the timeout
                 * fired before the reset completed.
                 */
                port_state_machine_change(sci_port, SCI_BASE_PORT_STATE_FAILED);
        } else if (current_state == SCI_BASE_PORT_STATE_STOPPED) {
                /* if the port is stopped then the start request failed In this
                 * case stay in the stopped state.
                 */
                dev_err(sciport_to_dev(sci_port),
                        "%s: SCIC Port 0x%p failed to stop before tiemout.\n",
                        __func__,
                        sci_port);
        } else if (current_state == SCI_BASE_PORT_STATE_STOPPING) {
                /* if the port is still stopping then the stop has not completed */
                isci_port_stop_complete(sci_port->owning_controller,
                                        sci_port,
                                        SCI_FAILURE_TIMEOUT);
        } else {
                /* The port is in the ready state and we have a timer
                 * reporting a timeout this should not happen.
                 */
                dev_err(sciport_to_dev(sci_port),
                        "%s: SCIC Port 0x%p is processing a timeout operation "
                        "in state %d.\n", __func__, sci_port, current_state);
        }
}

/* --------------------------------------------------------------------------- */

/**
 * This function updates the hardwares VIIT entry for this port.
 *
 *
 */
static void scic_sds_port_update_viit_entry(struct scic_sds_port *sci_port)
{
        struct sci_sas_address sas_address;

        scic_sds_port_get_sas_address(sci_port, &sas_address);

        writel(sas_address.high,
                &sci_port->viit_registers->initiator_sas_address_hi);
        writel(sas_address.low,
                &sci_port->viit_registers->initiator_sas_address_lo);

        /* This value get cleared just in case its not already cleared */
        writel(0, &sci_port->viit_registers->reserved);

        /* We are required to update the status register last */
        writel(SCU_VIIT_ENTRY_ID_VIIT |
               SCU_VIIT_IPPT_INITIATOR |
               ((1 << sci_port->physical_port_index) << SCU_VIIT_ENTRY_LPVIE_SHIFT) |
               SCU_VIIT_STATUS_ALL_VALID,
               &sci_port->viit_registers->status);
}

/**
 * This method returns the maximum allowed speed for data transfers on this
 *    port.  This maximum allowed speed evaluates to the maximum speed of the
 *    slowest phy in the port.
 * @sci_port: This parameter specifies the port for which to retrieve the
 *    maximum allowed speed.
 *
 * This method returns the maximum negotiated speed of the slowest phy in the
 * port.
 */
enum sas_linkrate scic_sds_port_get_max_allowed_speed(
        struct scic_sds_port *sci_port)
{
        u16 index;
        enum sas_linkrate max_allowed_speed = SAS_LINK_RATE_6_0_GBPS;
        struct scic_sds_phy *phy = NULL;

        /*
         * Loop through all of the phys in this port and find the phy with the
         * lowest maximum link rate. */
        for (index = 0; index < SCI_MAX_PHYS; index++) {
                phy = sci_port->phy_table[index];
                if (
                        (phy != NULL)
                        && (scic_sds_port_active_phy(sci_port, phy) == true)
                        && (phy->max_negotiated_speed < max_allowed_speed)
                        )
                        max_allowed_speed = phy->max_negotiated_speed;
        }

        return max_allowed_speed;
}

static void scic_port_enable_broadcast_change_notification(struct scic_sds_port *port)
{
        struct scic_sds_phy *phy;
        u32 register_value;
        u8 index;

        /* Loop through all of the phys to enable BCN. */
        for (index = 0; index < SCI_MAX_PHYS; index++) {
                phy = port->phy_table[index];
                if (phy != NULL) {
                        register_value =
                                readl(&phy->link_layer_registers->link_layer_control);

                        /* clear the bit by writing 1. */
                        writel(register_value,
                                &phy->link_layer_registers->link_layer_control);
                }
        }
}

/*
 * ****************************************************************************
 * *  READY SUBSTATE HANDLERS
 * **************************************************************************** */

/*
 * This method is the general ready substate complete io handler for the
 * struct scic_sds_port object.  This function decrments the outstanding request count
 * for this port object. enum sci_status SCI_SUCCESS
 */
static enum sci_status scic_sds_port_ready_substate_complete_io_handler(
        struct scic_sds_port *port,
        struct scic_sds_remote_device *device,
        struct scic_sds_request *io_request)
{
        scic_sds_port_decrement_request_count(port);

        return SCI_SUCCESS;
}

/**
 *
 * @sci_port: This is the struct scic_sds_port object that which has a phy that has
 *    gone link up.
 * @sci_phy: This is the struct scic_sds_phy object that has gone link up.
 *
 * This method is the ready waiting substate link up handler for the
 * struct scic_sds_port object.  This methos will report the link up condition for
 * this port and will transition to the ready operational substate. none
 */
static void scic_sds_port_ready_waiting_substate_link_up_handler(
        struct scic_sds_port *sci_port,
        struct scic_sds_phy *sci_phy)
{
        /*
         * Since this is the first phy going link up for the port we can just enable
         * it and continue. */
        scic_sds_port_activate_phy(sci_port, sci_phy, true);

        port_state_machine_change(sci_port,
                                  SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL);
}

/*
 * This method is the ready waiting substate start io handler for the
 * struct scic_sds_port object. The port object can not accept new requests so the
 * request is failed. enum sci_status SCI_FAILURE_INVALID_STATE
 */
static enum sci_status scic_sds_port_ready_waiting_substate_start_io_handler(
        struct scic_sds_port *port,
        struct scic_sds_remote_device *device,
        struct scic_sds_request *io_request)
{
        return SCI_FAILURE_INVALID_STATE;
}

/**
 * scic_sds_port_ready_operational_substate_link_up_handler() -
 * @sci_port: This is the struct scic_sds_port object that which has a phy that has
 *    gone link up.
 * @sci_phy: This is the struct scic_sds_phy object that has gone link up.
 *
 * This method is the ready operational substate link up handler for the
 * struct scic_sds_port object. This function notifies the SCI User that the phy has
 * gone link up. none
 */
static void scic_sds_port_ready_operational_substate_link_up_handler(
        struct scic_sds_port *sci_port,
        struct scic_sds_phy *sci_phy)
{
        scic_sds_port_general_link_up_handler(sci_port, sci_phy, true);
}

/**
 * scic_sds_port_ready_operational_substate_link_down_handler() -
 * @sci_port: This is the struct scic_sds_port object that which has a phy that has
 *    gone link down.
 * @sci_phy: This is the struct scic_sds_phy object that has gone link down.
 *
 * This method is the ready operational substate link down handler for the
 * struct scic_sds_port object. This function notifies the SCI User that the phy has
 * gone link down and if this is the last phy in the port the port will change
 * state to the ready waiting substate. none
 */
static void scic_sds_port_ready_operational_substate_link_down_handler(
        struct scic_sds_port *sci_port,
        struct scic_sds_phy *sci_phy)
{
        scic_sds_port_deactivate_phy(sci_port, sci_phy, true);

        /*
         * If there are no active phys left in the port, then transition
         * the port to the WAITING state until such time as a phy goes
         * link up. */
        if (sci_port->active_phy_mask == 0)
                port_state_machine_change(sci_port,
                                          SCIC_SDS_PORT_READY_SUBSTATE_WAITING);
}

/*
 * This method is the ready operational substate start io handler for the
 * struct scic_sds_port object.  This function incremetns the outstanding request
 * count for this port object. enum sci_status SCI_SUCCESS
 */
static enum sci_status scic_sds_port_ready_operational_substate_start_io_handler(
        struct scic_sds_port *port,
        struct scic_sds_remote_device *device,
        struct scic_sds_request *io_request)
{
        port->started_request_count++;
        return SCI_SUCCESS;
}

/**
 * scic_sds_port_ready_configuring_substate_complete_io_handler() -
 * @port: This is the port that is being requested to complete the io request.
 * @device: This is the device on which the io is completing.
 *
 * This method will decrement the outstanding request count for this port. If
 * the request count goes to 0 then the port can be reprogrammed with its new
 * phy data.
 */
static enum sci_status
scic_sds_port_ready_configuring_substate_complete_io_handler(
        struct scic_sds_port *port,
        struct scic_sds_remote_device *device,
        struct scic_sds_request *io_request)
{
        scic_sds_port_decrement_request_count(port);

        if (port->started_request_count == 0) {
                port_state_machine_change(port,
                                          SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL);
        }

        return SCI_SUCCESS;
}

static enum sci_status default_port_handler(struct scic_sds_port *sci_port,
                                            const char *func)
{
        dev_warn(sciport_to_dev(sci_port),
                 "%s: in wrong state: %d\n", func,
                 sci_base_state_machine_get_state(&sci_port->state_machine));
        return SCI_FAILURE_INVALID_STATE;
}

/*
 * This is the default method for a port unsolicited frame request.  It will
 * report a warning and exit. enum sci_status SCI_FAILURE_INVALID_STATE Is it even
 * possible to receive an unsolicited frame directed to a port object?  It
 * seems possible if we implementing virtual functions but until then?
 */
static enum sci_status
scic_sds_port_default_frame_handler(struct scic_sds_port *sci_port,
                                    u32 frame_index)
{
        struct scic_sds_controller *scic = scic_sds_port_get_controller(sci_port);

        default_port_handler(sci_port, __func__);
        scic_sds_controller_release_frame(scic, frame_index);

        return SCI_FAILURE_INVALID_STATE;
}

static enum sci_status scic_sds_port_default_event_handler(struct scic_sds_port *sci_port,
                                                    u32 event_code)
{
        return default_port_handler(sci_port, __func__);
}

static void scic_sds_port_default_link_up_handler(struct scic_sds_port *sci_port,
                                           struct scic_sds_phy *sci_phy)
{
        default_port_handler(sci_port, __func__);
}

static void scic_sds_port_default_link_down_handler(struct scic_sds_port *sci_port,
                                             struct scic_sds_phy *sci_phy)
{
        default_port_handler(sci_port, __func__);
}

static enum sci_status scic_sds_port_default_start_io_handler(struct scic_sds_port *sci_port,
                                                       struct scic_sds_remote_device *sci_dev,
                                                       struct scic_sds_request *sci_req)
{
        return default_port_handler(sci_port, __func__);
}

static enum sci_status scic_sds_port_default_complete_io_handler(struct scic_sds_port *sci_port,
                                                                 struct scic_sds_remote_device *sci_dev,
                                                                 struct scic_sds_request *sci_req)
{
        return default_port_handler(sci_port, __func__);
}

/*
 * ******************************************************************************
 * *  PORT STATE PRIVATE METHODS
 * ****************************************************************************** */

/**
 *
 * @sci_port: This is the struct scic_sds_port object to suspend.
 *
 * This method will susped the port task scheduler for this port object. none
 */
static void
scic_sds_port_suspend_port_task_scheduler(struct scic_sds_port *port)
{
        u32 pts_control_value;

        pts_control_value = readl(&port->port_task_scheduler_registers->control);
        pts_control_value |= SCU_PTSxCR_GEN_BIT(SUSPEND);
        writel(pts_control_value, &port->port_task_scheduler_registers->control);
}

/**
 * scic_sds_port_post_dummy_request() - post dummy/workaround request
 * @sci_port: port to post task
 *
 * Prevent the hardware scheduler from posting new requests to the front
 * of the scheduler queue causing a starvation problem for currently
 * ongoing requests.
 *
 */
static void scic_sds_port_post_dummy_request(struct scic_sds_port *sci_port)
{
        u32 command;
        struct scu_task_context *task_context;
        struct scic_sds_controller *scic = sci_port->owning_controller;
        u16 tci = sci_port->reserved_tci;

        task_context = scic_sds_controller_get_task_context_buffer(scic, tci);

        task_context->abort = 0;

        command = SCU_CONTEXT_COMMAND_REQUEST_TYPE_POST_TC |
                  sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT |
                  tci;

        scic_sds_controller_post_request(scic, command);
}

/**
 * This routine will abort the dummy request.  This will alow the hardware to
 * power down parts of the silicon to save power.
 *
 * @sci_port: The port on which the task must be aborted.
 *
 */
static void scic_sds_port_abort_dummy_request(struct scic_sds_port *sci_port)
{
        struct scic_sds_controller *scic = sci_port->owning_controller;
        u16 tci = sci_port->reserved_tci;
        struct scu_task_context *tc;
        u32 command;

        tc = scic_sds_controller_get_task_context_buffer(scic, tci);

        tc->abort = 1;

        command = SCU_CONTEXT_COMMAND_REQUEST_POST_TC_ABORT |
                  sci_port->physical_port_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT |
                  tci;

        scic_sds_controller_post_request(scic, command);
}

/**
 *
 * @sci_port: This is the struct scic_sds_port object to resume.
 *
 * This method will resume the port task scheduler for this port object. none
 */
static void
scic_sds_port_resume_port_task_scheduler(struct scic_sds_port *port)
{
        u32 pts_control_value;

        pts_control_value = readl(&port->port_task_scheduler_registers->control);
        pts_control_value &= ~SCU_PTSxCR_GEN_BIT(SUSPEND);
        writel(pts_control_value, &port->port_task_scheduler_registers->control);
}

/*
 * ******************************************************************************
 * *  PORT READY SUBSTATE METHODS
 * ****************************************************************************** */

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This method will perform the actions required by the struct scic_sds_port on
 * entering the SCIC_SDS_PORT_READY_SUBSTATE_WAITING. This function checks the
 * port for any ready phys.  If there is at least one phy in a ready state then
 * the port transitions to the ready operational substate. none
 */
static void scic_sds_port_ready_substate_waiting_enter(void *object)
{
        struct scic_sds_port *sci_port = object;

        scic_sds_port_set_base_state_handlers(
                sci_port, SCIC_SDS_PORT_READY_SUBSTATE_WAITING
                );

        scic_sds_port_suspend_port_task_scheduler(sci_port);

        sci_port->not_ready_reason = SCIC_PORT_NOT_READY_NO_ACTIVE_PHYS;

        if (sci_port->active_phy_mask != 0) {
                /* At least one of the phys on the port is ready */
                port_state_machine_change(sci_port,
                                          SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL);
        }
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This function will perform the actions required by the struct scic_sds_port
 * on entering the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function sets
 * the state handlers for the port object, notifies the SCI User that the port
 * is ready, and resumes port operations. none
 */
static void scic_sds_port_ready_substate_operational_enter(void *object)
{
        u32 index;
        struct scic_sds_port *sci_port = object;
        struct scic_sds_controller *scic = sci_port->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);
        struct isci_port *iport = sci_port_to_iport(sci_port);

        scic_sds_port_set_base_state_handlers(
                        sci_port,
                        SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL);

        isci_port_ready(ihost, iport);

        for (index = 0; index < SCI_MAX_PHYS; index++) {
                if (sci_port->phy_table[index]) {
                        writel(sci_port->physical_port_index,
                                &sci_port->port_pe_configuration_register[
                                        sci_port->phy_table[index]->phy_index]);
                }
        }

        scic_sds_port_update_viit_entry(sci_port);

        scic_sds_port_resume_port_task_scheduler(sci_port);

        /*
         * Post the dummy task for the port so the hardware can schedule
         * io correctly
         */
        scic_sds_port_post_dummy_request(sci_port);
}

static void scic_sds_port_invalidate_dummy_remote_node(struct scic_sds_port *sci_port)
{
        struct scic_sds_controller *scic = sci_port->owning_controller;
        u8 phys_index = sci_port->physical_port_index;
        union scu_remote_node_context *rnc;
        u16 rni = sci_port->reserved_rni;
        u32 command;

        rnc = &scic->remote_node_context_table[rni];

        rnc->ssp.is_valid = false;

        /* ensure the preceding tc abort request has reached the
         * controller and give it ample time to act before posting the rnc
         * invalidate
         */
        readl(&scic->smu_registers->interrupt_status); /* flush */
        udelay(10);

        command = SCU_CONTEXT_COMMAND_POST_RNC_INVALIDATE |
                  phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;

        scic_sds_controller_post_request(scic, command);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This method will perform the actions required by the struct scic_sds_port on
 * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports
 * the port not ready and suspends the port task scheduler. none
 */
static void scic_sds_port_ready_substate_operational_exit(void *object)
{
        struct scic_sds_port *sci_port = object;
        struct scic_sds_controller *scic = sci_port->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);
        struct isci_port *iport = sci_port_to_iport(sci_port);

        /*
         * Kill the dummy task for this port if it has not yet posted
         * the hardware will treat this as a NOP and just return abort
         * complete.
         */
        scic_sds_port_abort_dummy_request(sci_port);

        isci_port_not_ready(ihost, iport);

        if (sci_port->ready_exit)
                scic_sds_port_invalidate_dummy_remote_node(sci_port);
}

/*
 * ******************************************************************************
 * *  PORT READY CONFIGURING METHODS
 * ****************************************************************************** */

/**
 * scic_sds_port_ready_substate_configuring_enter() -
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This method will perform the actions required by the struct scic_sds_port on
 * exiting the SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL. This function reports
 * the port not ready and suspends the port task scheduler. none
 */
static void scic_sds_port_ready_substate_configuring_enter(void *object)
{
        struct scic_sds_port *sci_port = object;
        struct scic_sds_controller *scic = sci_port->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);
        struct isci_port *iport = sci_port_to_iport(sci_port);

        scic_sds_port_set_base_state_handlers(
                        sci_port,
                        SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);

        if (sci_port->active_phy_mask == 0) {
                isci_port_not_ready(ihost, iport);

                port_state_machine_change(sci_port,
                                          SCIC_SDS_PORT_READY_SUBSTATE_WAITING);
        } else if (sci_port->started_request_count == 0)
                port_state_machine_change(sci_port,
                                          SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL);
}

static void scic_sds_port_ready_substate_configuring_exit(void *object)
{
        struct scic_sds_port *sci_port = object;

        scic_sds_port_suspend_port_task_scheduler(sci_port);
        if (sci_port->ready_exit)
                scic_sds_port_invalidate_dummy_remote_node(sci_port);
}

/* --------------------------------------------------------------------------- */

/**
 *
 * @port: This is the struct scic_sds_port object on which the io request count will
 *    be decremented.
 * @device: This is the struct scic_sds_remote_device object to which the io request
 *    is being directed.  This parameter is not required to complete this
 *    operation.
 * @io_request: This is the request that is being completed on this port
 *    object.  This parameter is not required to complete this operation.
 *
 * This is a general complete io request handler for the struct scic_sds_port object.
 * enum sci_status SCI_SUCCESS
 */
static enum sci_status scic_sds_port_general_complete_io_handler(
        struct scic_sds_port *port,
        struct scic_sds_remote_device *device,
        struct scic_sds_request *io_request)
{
        scic_sds_port_decrement_request_count(port);

        return SCI_SUCCESS;
}

/*
 * This method takes the struct scic_sds_port that is in a stopping state and handles
 * the complete io request. Should the request count reach 0 then the port
 * object will transition to the stopped state. enum sci_status SCI_SUCCESS
 */
static enum sci_status scic_sds_port_stopping_state_complete_io_handler(
        struct scic_sds_port *sci_port,
        struct scic_sds_remote_device *device,
        struct scic_sds_request *io_request)
{
        scic_sds_port_decrement_request_count(sci_port);

        if (sci_port->started_request_count == 0)
                port_state_machine_change(sci_port,
                                          SCI_BASE_PORT_STATE_STOPPED);

        return SCI_SUCCESS;
}

/*
 * ****************************************************************************
 * *  RESETTING STATE HANDLERS
 * **************************************************************************** */

/*
 * This method will transition a failed port to its ready state.  The port
 * failed because a hard reset request timed out but at some time later one or
 * more phys in the port became ready. enum sci_status SCI_SUCCESS
 */
static void scic_sds_port_reset_state_link_up_handler(
        struct scic_sds_port *port,
        struct scic_sds_phy *phy)
{
        /*
         * / @todo We should make sure that the phy that has gone link up is the same
         * /       one on which we sent the reset.  It is possible that the phy on
         * /       which we sent the reset is not the one that has gone link up and we
         * /       want to make sure that phy being reset comes back.  Consider the
         * /       case where a reset is sent but before the hardware processes the
         * /       reset it get a link up on the port because of a hot plug event.
         * /       because of the reset request this phy will go link down almost
         * /       immediately. */

        /*
         * In the resetting state we don't notify the user regarding
         * link up and link down notifications. */
        scic_sds_port_general_link_up_handler(port, phy, false);
}

/*
 * This method process link down notifications that occur during a port reset
 * operation. Link downs can occur during the reset operation. enum sci_status
 * SCI_SUCCESS
 */
static void scic_sds_port_reset_state_link_down_handler(
        struct scic_sds_port *port,
        struct scic_sds_phy *phy)
{
        /*
         * In the resetting state we don't notify the user regarding
         * link up and link down notifications. */
        scic_sds_port_deactivate_phy(port, phy, false);
}

enum sci_status scic_sds_port_start(struct scic_sds_port *sci_port)
{
        struct scic_sds_controller *scic = sci_port->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);
        enum sci_status status = SCI_SUCCESS;
        enum scic_sds_port_states state;
        u32 phy_mask;

        state = sci_port->state_machine.current_state_id;
        if (state != SCI_BASE_PORT_STATE_STOPPED) {
                dev_warn(sciport_to_dev(sci_port),
                         "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }

        if (sci_port->assigned_device_count > 0) {
                /* TODO This is a start failure operation because
                 * there are still devices assigned to this port.
                 * There must be no devices assigned to a port on a
                 * start operation.
                 */
                return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
        }

        sci_port->timer_handle =
                isci_timer_create(ihost,
                                  sci_port,
                                  scic_sds_port_timeout_handler);

        if (!sci_port->timer_handle)
                return SCI_FAILURE_INSUFFICIENT_RESOURCES;

        if (sci_port->reserved_rni == SCU_DUMMY_INDEX) {
                u16 rni = scic_sds_remote_node_table_allocate_remote_node(
                                &scic->available_remote_nodes, 1);

                if (rni != SCU_DUMMY_INDEX)
                        scic_sds_port_construct_dummy_rnc(sci_port, rni);
                else
                        status = SCI_FAILURE_INSUFFICIENT_RESOURCES;
                sci_port->reserved_rni = rni;
        }

        if (sci_port->reserved_tci == SCU_DUMMY_INDEX) {
                /* Allocate a TCI and remove the sequence nibble */
                u16 tci = scic_controller_allocate_io_tag(scic);

                if (tci != SCU_DUMMY_INDEX)
                        scic_sds_port_construct_dummy_task(sci_port, tci);
                else
                        status = SCI_FAILURE_INSUFFICIENT_RESOURCES;
                sci_port->reserved_tci = tci;
        }

        if (status == SCI_SUCCESS) {
                phy_mask = scic_sds_port_get_phys(sci_port);

                /*
                 * There are one or more phys assigned to this port.  Make sure
                 * the port's phy mask is in fact legal and supported by the
                 * silicon.
                 */
                if (scic_sds_port_is_phy_mask_valid(sci_port, phy_mask) == true) {
                        port_state_machine_change(sci_port,
                                                  SCI_BASE_PORT_STATE_READY);

                        return SCI_SUCCESS;
                }
                status = SCI_FAILURE;
        }

        if (status != SCI_SUCCESS)
                scic_sds_port_destroy_dummy_resources(sci_port);

        return status;
}

enum sci_status scic_sds_port_stop(struct scic_sds_port *sci_port)
{
        enum scic_sds_port_states state;

        state = sci_port->state_machine.current_state_id;
        switch (state) {
        case SCI_BASE_PORT_STATE_STOPPED:
                return SCI_SUCCESS;
        case SCIC_SDS_PORT_READY_SUBSTATE_WAITING:
        case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL:
        case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING:
        case SCI_BASE_PORT_STATE_RESETTING:
                port_state_machine_change(sci_port,
                                          SCI_BASE_PORT_STATE_STOPPING);
                return SCI_SUCCESS;
        default:
                dev_warn(sciport_to_dev(sci_port),
                         "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }
}

static enum sci_status scic_port_hard_reset(struct scic_sds_port *sci_port, u32 timeout)
{
        enum sci_status status = SCI_FAILURE_INVALID_PHY;
        struct scic_sds_phy *selected_phy = NULL;
        enum scic_sds_port_states state;
        u32 phy_index;

        state = sci_port->state_machine.current_state_id;
        if (state != SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL) {
                dev_warn(sciport_to_dev(sci_port),
                         "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }

        /* Select a phy on which we can send the hard reset request. */
        for (phy_index = 0; phy_index < SCI_MAX_PHYS && !selected_phy; phy_index++) {
                selected_phy = sci_port->phy_table[phy_index];
                if (selected_phy &&
                    !scic_sds_port_active_phy(sci_port, selected_phy)) {
                        /*
                         * We found a phy but it is not ready select
                         * different phy
                         */
                        selected_phy = NULL;
                }
        }

        /* If we have a phy then go ahead and start the reset procedure */
        if (!selected_phy)
                return status;
        status = scic_sds_phy_reset(selected_phy);

        if (status != SCI_SUCCESS)
                return status;

        isci_timer_start(sci_port->timer_handle, timeout);
        sci_port->not_ready_reason = SCIC_PORT_NOT_READY_HARD_RESET_REQUESTED;

        port_state_machine_change(sci_port,
                                  SCI_BASE_PORT_STATE_RESETTING);
        return SCI_SUCCESS;
}

/**
 * scic_sds_port_add_phy() -
 * @sci_port: This parameter specifies the port in which the phy will be added.
 * @sci_phy: This parameter is the phy which is to be added to the port.
 *
 * This method will add a PHY to the selected port. This method returns an
 * enum sci_status. SCI_SUCCESS the phy has been added to the port. Any other
 * status is a failure to add the phy to the port.
 */
enum sci_status scic_sds_port_add_phy(struct scic_sds_port *sci_port,
                                      struct scic_sds_phy *sci_phy)
{
        enum sci_status status;
        enum scic_sds_port_states state;

        state = sci_port->state_machine.current_state_id;
        switch (state) {
        case SCI_BASE_PORT_STATE_STOPPED: {
                struct sci_sas_address port_sas_address;

                /* Read the port assigned SAS Address if there is one */
                scic_sds_port_get_sas_address(sci_port, &port_sas_address);

                if (port_sas_address.high != 0 && port_sas_address.low != 0) {
                        struct sci_sas_address phy_sas_address;

                        /* Make sure that the PHY SAS Address matches the SAS Address
                         * for this port
                         */
                        scic_sds_phy_get_sas_address(sci_phy, &phy_sas_address);

                        if (port_sas_address.high != phy_sas_address.high ||
                            port_sas_address.low  != phy_sas_address.low)
                                return SCI_FAILURE_UNSUPPORTED_PORT_CONFIGURATION;
                }
                return scic_sds_port_set_phy(sci_port, sci_phy);
        }
        case SCIC_SDS_PORT_READY_SUBSTATE_WAITING:
        case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL:
                status = scic_sds_port_set_phy(sci_port, sci_phy);

                if (status != SCI_SUCCESS)
                        return status;

                scic_sds_port_general_link_up_handler(sci_port, sci_phy, true);
                sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
                port_state_machine_change(sci_port, SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);

                return status;
        case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING:
                status = scic_sds_port_set_phy(sci_port, sci_phy);

                if (status != SCI_SUCCESS)
                        return status;
                scic_sds_port_general_link_up_handler(sci_port, sci_phy, true);

                /* Re-enter the configuring state since this may be the last phy in
                 * the port.
                 */
                port_state_machine_change(sci_port,
                                          SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
                return SCI_SUCCESS;
        default:
                dev_warn(sciport_to_dev(sci_port),
                         "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }
}

/**
 * scic_sds_port_remove_phy() -
 * @sci_port: This parameter specifies the port in which the phy will be added.
 * @sci_phy: This parameter is the phy which is to be added to the port.
 *
 * This method will remove the PHY from the selected PORT. This method returns
 * an enum sci_status. SCI_SUCCESS the phy has been removed from the port. Any
 * other status is a failure to add the phy to the port.
 */
enum sci_status scic_sds_port_remove_phy(struct scic_sds_port *sci_port,
                                         struct scic_sds_phy *sci_phy)
{
        enum sci_status status;
        enum scic_sds_port_states state;

        state = sci_port->state_machine.current_state_id;

        switch (state) {
        case SCI_BASE_PORT_STATE_STOPPED:
                return scic_sds_port_clear_phy(sci_port, sci_phy);
        case SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL:
                status = scic_sds_port_clear_phy(sci_port, sci_phy);
                if (status != SCI_SUCCESS)
                        return status;

                scic_sds_port_deactivate_phy(sci_port, sci_phy, true);
                sci_port->not_ready_reason = SCIC_PORT_NOT_READY_RECONFIGURING;
                port_state_machine_change(sci_port,
                                          SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);
                return SCI_SUCCESS;
        case SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING:
                status = scic_sds_port_clear_phy(sci_port, sci_phy);

                if (status != SCI_SUCCESS)
                        return status;
                scic_sds_port_deactivate_phy(sci_port, sci_phy, true);

                /* Re-enter the configuring state since this may be the last phy in
                 * the port
                 */
                port_state_machine_change(sci_port,
                                          SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING);

                return SCI_SUCCESS;
        default:
                dev_warn(sciport_to_dev(sci_port),
                         "%s: in wrong state: %d\n", __func__, state);
                return SCI_FAILURE_INVALID_STATE;
        }
}

static struct scic_sds_port_state_handler scic_sds_port_state_handler_table[] = {
        [SCI_BASE_PORT_STATE_STOPPED] = {
                .frame_handler          = scic_sds_port_default_frame_handler,
                .event_handler          = scic_sds_port_default_event_handler,
                .link_up_handler        = scic_sds_port_default_link_up_handler,
                .link_down_handler      = scic_sds_port_default_link_down_handler,
                .start_io_handler       = scic_sds_port_default_start_io_handler,
                .complete_io_handler    = scic_sds_port_default_complete_io_handler
        },
        [SCI_BASE_PORT_STATE_STOPPING] = {
                .frame_handler          = scic_sds_port_default_frame_handler,
                .event_handler          = scic_sds_port_default_event_handler,
                .link_up_handler        = scic_sds_port_default_link_up_handler,
                .link_down_handler      = scic_sds_port_default_link_down_handler,
                .start_io_handler       = scic_sds_port_default_start_io_handler,
                .complete_io_handler    = scic_sds_port_stopping_state_complete_io_handler
        },
        [SCI_BASE_PORT_STATE_READY] = {
                .frame_handler          = scic_sds_port_default_frame_handler,
                .event_handler          = scic_sds_port_default_event_handler,
                .link_up_handler        = scic_sds_port_default_link_up_handler,
                .link_down_handler      = scic_sds_port_default_link_down_handler,
                .start_io_handler       = scic_sds_port_default_start_io_handler,
                .complete_io_handler    = scic_sds_port_general_complete_io_handler
        },
        [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = {
                .frame_handler          = scic_sds_port_default_frame_handler,
                .event_handler          = scic_sds_port_default_event_handler,
                .link_up_handler        = scic_sds_port_ready_waiting_substate_link_up_handler,
                .link_down_handler      = scic_sds_port_default_link_down_handler,
                .start_io_handler       = scic_sds_port_ready_waiting_substate_start_io_handler,
                .complete_io_handler    = scic_sds_port_ready_substate_complete_io_handler,
        },
        [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = {
                .frame_handler          = scic_sds_port_default_frame_handler,
                .event_handler          = scic_sds_port_default_event_handler,
                .link_up_handler        = scic_sds_port_ready_operational_substate_link_up_handler,
                .link_down_handler      = scic_sds_port_ready_operational_substate_link_down_handler,
                .start_io_handler       = scic_sds_port_ready_operational_substate_start_io_handler,
                .complete_io_handler    = scic_sds_port_ready_substate_complete_io_handler,
        },
        [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = {
                .frame_handler          = scic_sds_port_default_frame_handler,
                .event_handler          = scic_sds_port_default_event_handler,
                .link_up_handler        = scic_sds_port_default_link_up_handler,
                .link_down_handler      = scic_sds_port_default_link_down_handler,
                .start_io_handler       = scic_sds_port_default_start_io_handler,
                .complete_io_handler    = scic_sds_port_ready_configuring_substate_complete_io_handler
        },
        [SCI_BASE_PORT_STATE_RESETTING] = {
                .frame_handler          = scic_sds_port_default_frame_handler,
                .event_handler          = scic_sds_port_default_event_handler,
                .link_up_handler        = scic_sds_port_reset_state_link_up_handler,
                .link_down_handler      = scic_sds_port_reset_state_link_down_handler,
                .start_io_handler       = scic_sds_port_default_start_io_handler,
                .complete_io_handler    = scic_sds_port_general_complete_io_handler
        },
        [SCI_BASE_PORT_STATE_FAILED] = {
                .frame_handler          = scic_sds_port_default_frame_handler,
                .event_handler          = scic_sds_port_default_event_handler,
                .link_up_handler        = scic_sds_port_default_link_up_handler,
                .link_down_handler      = scic_sds_port_default_link_down_handler,
                .start_io_handler       = scic_sds_port_default_start_io_handler,
                .complete_io_handler    = scic_sds_port_general_complete_io_handler
        }
};

/*
 * ******************************************************************************
 * *  PORT STATE PRIVATE METHODS
 * ****************************************************************************** */

/**
 *
 * @sci_port: This is the port object which to suspend.
 *
 * This method will enable the SCU Port Task Scheduler for this port object but
 * will leave the port task scheduler in a suspended state. none
 */
static void
scic_sds_port_enable_port_task_scheduler(struct scic_sds_port *port)
{
        u32 pts_control_value;

        pts_control_value = readl(&port->port_task_scheduler_registers->control);
        pts_control_value |= SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND);
        writel(pts_control_value, &port->port_task_scheduler_registers->control);
}

/**
 *
 * @sci_port: This is the port object which to resume.
 *
 * This method will disable the SCU port task scheduler for this port object.
 * none
 */
static void
scic_sds_port_disable_port_task_scheduler(struct scic_sds_port *port)
{
        u32 pts_control_value;

        pts_control_value = readl(&port->port_task_scheduler_registers->control);
        pts_control_value &=
                ~(SCU_PTSxCR_GEN_BIT(ENABLE) | SCU_PTSxCR_GEN_BIT(SUSPEND));
        writel(pts_control_value, &port->port_task_scheduler_registers->control);
}

static void scic_sds_port_post_dummy_remote_node(struct scic_sds_port *sci_port)
{
        struct scic_sds_controller *scic = sci_port->owning_controller;
        u8 phys_index = sci_port->physical_port_index;
        union scu_remote_node_context *rnc;
        u16 rni = sci_port->reserved_rni;
        u32 command;

        rnc = &scic->remote_node_context_table[rni];
        rnc->ssp.is_valid = true;

        command = SCU_CONTEXT_COMMAND_POST_RNC_32 |
                  phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;

        scic_sds_controller_post_request(scic, command);

        /* ensure hardware has seen the post rnc command and give it
         * ample time to act before sending the suspend
         */
        readl(&scic->smu_registers->interrupt_status); /* flush */
        udelay(10);

        command = SCU_CONTEXT_COMMAND_POST_RNC_SUSPEND_TX_RX |
                  phys_index << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT | rni;

        scic_sds_controller_post_request(scic, command);
}

/*
 * ******************************************************************************
 * *  PORT STATE METHODS
 * ****************************************************************************** */

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This method will perform the actions required by the struct scic_sds_port on
 * entering the SCI_BASE_PORT_STATE_STOPPED. This function sets the stopped
 * state handlers for the struct scic_sds_port object and disables the port task
 * scheduler in the hardware. none
 */
static void scic_sds_port_stopped_state_enter(void *object)
{
        struct scic_sds_port *sci_port = object;

        scic_sds_port_set_base_state_handlers(
                sci_port, SCI_BASE_PORT_STATE_STOPPED
                );

        if (
                SCI_BASE_PORT_STATE_STOPPING
                == sci_port->state_machine.previous_state_id
                ) {
                /*
                 * If we enter this state becasuse of a request to stop
                 * the port then we want to disable the hardwares port
                 * task scheduler. */
                scic_sds_port_disable_port_task_scheduler(sci_port);
        }
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This method will perform the actions required by the struct scic_sds_port on
 * exiting the SCI_BASE_STATE_STOPPED. This function enables the SCU hardware
 * port task scheduler. none
 */
static void scic_sds_port_stopped_state_exit(void *object)
{
        struct scic_sds_port *sci_port = object;

        /* Enable and suspend the port task scheduler */
        scic_sds_port_enable_port_task_scheduler(sci_port);
}

/**
 * scic_sds_port_ready_state_enter -
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This method will perform the actions required by the struct scic_sds_port on
 * entering the SCI_BASE_PORT_STATE_READY. This function sets the ready state
 * handlers for the struct scic_sds_port object, reports the port object as
 * not ready and starts the ready substate machine. none
 */
static void scic_sds_port_ready_state_enter(void *object)
{
        struct scic_sds_port *sci_port = object;
        struct scic_sds_controller *scic = sci_port->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);
        struct isci_port *iport = sci_port_to_iport(sci_port);
        u32 prev_state;

        /* Put the ready state handlers in place though they will not be there long */
        scic_sds_port_set_base_state_handlers(sci_port, SCI_BASE_PORT_STATE_READY);

        prev_state = sci_port->state_machine.previous_state_id;
        if (prev_state  == SCI_BASE_PORT_STATE_RESETTING)
                isci_port_hard_reset_complete(iport, SCI_SUCCESS);
        else
                isci_port_not_ready(ihost, iport);

        /* Post and suspend the dummy remote node context for this port. */
        scic_sds_port_post_dummy_remote_node(sci_port);

        /* Start the ready substate machine */
        port_state_machine_change(sci_port,
                                  SCIC_SDS_PORT_READY_SUBSTATE_WAITING);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This method will perform the actions required by the struct scic_sds_port on
 * entering the SCI_BASE_PORT_STATE_RESETTING. This function sets the resetting
 * state handlers for the struct scic_sds_port object. none
 */
static void scic_sds_port_resetting_state_enter(void *object)
{
        struct scic_sds_port *sci_port = object;

        scic_sds_port_set_base_state_handlers(
                sci_port, SCI_BASE_PORT_STATE_RESETTING
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This function will perform the actions required by the
 * struct scic_sds_port on
 * exiting the SCI_BASE_STATE_RESETTING. This function does nothing. none
 */
static inline void scic_sds_port_resetting_state_exit(void *object)
{
        struct scic_sds_port *sci_port = object;

        isci_timer_stop(sci_port->timer_handle);
}

/**
 *
 * @object: This is the void object which is cast to a
 * struct scic_sds_port object.
 *
 * This method will perform the actions required by the struct scic_sds_port on
 * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping
 * state handlers for the struct scic_sds_port object. none
 */
static void scic_sds_port_stopping_state_enter(void *object)
{
        struct scic_sds_port *sci_port = object;

        scic_sds_port_set_base_state_handlers(
                sci_port, SCI_BASE_PORT_STATE_STOPPING
                );
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This function will perform the actions required by the
 * struct scic_sds_port on
 * exiting the SCI_BASE_STATE_STOPPING. This function does nothing. none
 */
static inline void
scic_sds_port_stopping_state_exit(void *object)
{
        struct scic_sds_port *sci_port = object;

        isci_timer_stop(sci_port->timer_handle);

        scic_sds_port_destroy_dummy_resources(sci_port);
}

/**
 *
 * @object: This is the object which is cast to a struct scic_sds_port object.
 *
 * This function will perform the actions required by the
 * struct scic_sds_port on
 * entering the SCI_BASE_PORT_STATE_STOPPING. This function sets the stopping
 * state handlers for the struct scic_sds_port object. none
 */
static void scic_sds_port_failed_state_enter(void *object)
{
        struct scic_sds_port *sci_port = object;
        struct isci_port *iport = sci_port_to_iport(sci_port);

        scic_sds_port_set_base_state_handlers(sci_port,
                                              SCI_BASE_PORT_STATE_FAILED);

        isci_port_hard_reset_complete(iport, SCI_FAILURE_TIMEOUT);
}

/* --------------------------------------------------------------------------- */

static const struct sci_base_state scic_sds_port_state_table[] = {
        [SCI_BASE_PORT_STATE_STOPPED] = {
                .enter_state = scic_sds_port_stopped_state_enter,
                .exit_state  = scic_sds_port_stopped_state_exit
        },
        [SCI_BASE_PORT_STATE_STOPPING] = {
                .enter_state = scic_sds_port_stopping_state_enter,
                .exit_state  = scic_sds_port_stopping_state_exit
        },
        [SCI_BASE_PORT_STATE_READY] = {
                .enter_state = scic_sds_port_ready_state_enter,
        },
        [SCIC_SDS_PORT_READY_SUBSTATE_WAITING] = {
                .enter_state = scic_sds_port_ready_substate_waiting_enter,
        },
        [SCIC_SDS_PORT_READY_SUBSTATE_OPERATIONAL] = {
                .enter_state = scic_sds_port_ready_substate_operational_enter,
                .exit_state  = scic_sds_port_ready_substate_operational_exit
        },
        [SCIC_SDS_PORT_READY_SUBSTATE_CONFIGURING] = {
                .enter_state = scic_sds_port_ready_substate_configuring_enter,
                .exit_state  = scic_sds_port_ready_substate_configuring_exit
        },
        [SCI_BASE_PORT_STATE_RESETTING] = {
                .enter_state = scic_sds_port_resetting_state_enter,
                .exit_state  = scic_sds_port_resetting_state_exit
        },
        [SCI_BASE_PORT_STATE_FAILED] = {
                .enter_state = scic_sds_port_failed_state_enter,
        }
};

void scic_sds_port_construct(struct scic_sds_port *sci_port, u8 index,
                             struct scic_sds_controller *scic)
{
        sci_base_state_machine_construct(&sci_port->state_machine,
                                         sci_port,
                                         scic_sds_port_state_table,
                                         SCI_BASE_PORT_STATE_STOPPED);

        sci_base_state_machine_start(&sci_port->state_machine);

        sci_port->logical_port_index  = SCIC_SDS_DUMMY_PORT;
        sci_port->physical_port_index = index;
        sci_port->active_phy_mask     = 0;
        sci_port->ready_exit          = false;

        sci_port->owning_controller = scic;

        sci_port->started_request_count = 0;
        sci_port->assigned_device_count = 0;

        sci_port->reserved_rni = SCU_DUMMY_INDEX;
        sci_port->reserved_tci = SCU_DUMMY_INDEX;

        sci_port->timer_handle = NULL;
        sci_port->port_task_scheduler_registers = NULL;

        for (index = 0; index < SCI_MAX_PHYS; index++)
                sci_port->phy_table[index] = NULL;
}

void isci_port_init(struct isci_port *iport, struct isci_host *ihost, int index)
{
        INIT_LIST_HEAD(&iport->remote_dev_list);
        INIT_LIST_HEAD(&iport->domain_dev_list);
        spin_lock_init(&iport->state_lock);
        init_completion(&iport->start_complete);
        iport->isci_host = ihost;
        isci_port_change_state(iport, isci_freed);
}

/**
 * isci_port_get_state() - This function gets the status of the port object.
 * @isci_port: This parameter points to the isci_port object
 *
 * status of the object as a isci_status enum.
 */
enum isci_status isci_port_get_state(
        struct isci_port *isci_port)
{
        return isci_port->status;
}

static void isci_port_bc_change_received(struct isci_host *ihost,
                                         struct scic_sds_port *sci_port,
                                         struct scic_sds_phy *sci_phy)
{
        struct isci_phy *iphy = sci_phy_to_iphy(sci_phy);

        dev_dbg(&ihost->pdev->dev, "%s: iphy = %p, sas_phy = %p\n",
                __func__, iphy, &iphy->sas_phy);

        ihost->sas_ha.notify_port_event(&iphy->sas_phy, PORTE_BROADCAST_RCVD);
        scic_port_enable_broadcast_change_notification(sci_port);
}

void scic_sds_port_broadcast_change_received(
        struct scic_sds_port *sci_port,
        struct scic_sds_phy *sci_phy)
{
        struct scic_sds_controller *scic = sci_port->owning_controller;
        struct isci_host *ihost = scic_to_ihost(scic);

        /* notify the user. */
        isci_port_bc_change_received(ihost, sci_port, sci_phy);
}

int isci_port_perform_hard_reset(struct isci_host *ihost, struct isci_port *iport,
                                 struct isci_phy *iphy)
{
        unsigned long flags;
        enum sci_status status;
        int ret = TMF_RESP_FUNC_COMPLETE;

        dev_dbg(&ihost->pdev->dev, "%s: iport = %p\n",
                __func__, iport);

        init_completion(&iport->hard_reset_complete);

        spin_lock_irqsave(&ihost->scic_lock, flags);

        #define ISCI_PORT_RESET_TIMEOUT SCIC_SDS_SIGNATURE_FIS_TIMEOUT
        status = scic_port_hard_reset(&iport->sci, ISCI_PORT_RESET_TIMEOUT);

        spin_unlock_irqrestore(&ihost->scic_lock, flags);

        if (status == SCI_SUCCESS) {
                wait_for_completion(&iport->hard_reset_complete);

                dev_dbg(&ihost->pdev->dev,
                        "%s: iport = %p; hard reset completion\n",
                        __func__, iport);

                if (iport->hard_reset_status != SCI_SUCCESS)
                        ret = TMF_RESP_FUNC_FAILED;
        } else {
                ret = TMF_RESP_FUNC_FAILED;

                dev_err(&ihost->pdev->dev,
                        "%s: iport = %p; scic_port_hard_reset call"
                        " failed 0x%x\n",
                        __func__, iport, status);

        }

        /* If the hard reset for the port has failed, consider this
         * the same as link failures on all phys in the port.
         */
        if (ret != TMF_RESP_FUNC_COMPLETE) {
                dev_err(&ihost->pdev->dev,
                        "%s: iport = %p; hard reset failed "
                        "(0x%x) - sending link down to libsas for phy %p\n",
                        __func__, iport, iport->hard_reset_status, iphy);

                isci_port_link_down(ihost, iphy, iport);
        }

        return ret;
}

/**
 * isci_port_deformed() - This function is called by libsas when a port becomes
 *    inactive.
 * @phy: This parameter specifies the libsas phy with the inactive port.
 *
 */
void isci_port_deformed(struct asd_sas_phy *phy)
{
        pr_debug("%s: sas_phy = %p\n", __func__, phy);
}

/**
 * isci_port_formed() - This function is called by libsas when a port becomes
 *    active.
 * @phy: This parameter specifies the libsas phy with the active port.
 *
 */
void isci_port_formed(struct asd_sas_phy *phy)
{
        pr_debug("%s: sas_phy = %p, sas_port = %p\n", __func__, phy, phy->port);
}