1 //------------------------------------------------------------------------------
2 // Copyright (c) 2004-2010 Atheros Communications Inc.
3 // All rights reserved.
7 // Permission to use, copy, modify, and/or distribute this software for any
8 // purpose with or without fee is hereby granted, provided that the above
9 // copyright notice and this permission notice appear in all copies.
11 // THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
12 // WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
13 // MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
14 // ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
15 // WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
16 // ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
17 // OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
21 // Author(s): ="Atheros"
22 //------------------------------------------------------------------------------
25 * This driver is a pseudo ethernet driver to access the Atheros AR6000
29 #include "ar6000_drv.h"
30 #ifdef ATH6K_CONFIG_CFG80211
32 #endif /* ATH6K_CONFIG_CFG80211 */
34 #include "wmi_filter_linux.h"
35 #include "epping_test.h"
36 #include "wlan_config.h"
37 #include "ar3kconfig.h"
39 #include "AR6002/addrs.h"
42 /* LINUX_HACK_FUDGE_FACTOR -- this is used to provide a workaround for linux behavior. When
43 * the meta data was added to the header it was found that linux did not correctly provide
44 * enough headroom. However when more headroom was requested beyond what was truly needed
45 * Linux gave the requested headroom. Therefore to get the necessary headroom from Linux
46 * the driver requests more than is needed by the amount = LINUX_HACK_FUDGE_FACTOR */
47 #define LINUX_HACK_FUDGE_FACTOR 16
48 #define BDATA_BDADDR_OFFSET 28
50 u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
51 u8 null_mac[] = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0};
55 #define ATH_DEBUG_DBG_LOG ATH_DEBUG_MAKE_MODULE_MASK(0)
56 #define ATH_DEBUG_WLAN_CONNECT ATH_DEBUG_MAKE_MODULE_MASK(1)
57 #define ATH_DEBUG_WLAN_SCAN ATH_DEBUG_MAKE_MODULE_MASK(2)
58 #define ATH_DEBUG_WLAN_TX ATH_DEBUG_MAKE_MODULE_MASK(3)
59 #define ATH_DEBUG_WLAN_RX ATH_DEBUG_MAKE_MODULE_MASK(4)
60 #define ATH_DEBUG_HTC_RAW ATH_DEBUG_MAKE_MODULE_MASK(5)
61 #define ATH_DEBUG_HCI_BRIDGE ATH_DEBUG_MAKE_MODULE_MASK(6)
63 static ATH_DEBUG_MASK_DESCRIPTION driver_debug_desc[] = {
64 { ATH_DEBUG_DBG_LOG , "Target Debug Logs"},
65 { ATH_DEBUG_WLAN_CONNECT , "WLAN connect"},
66 { ATH_DEBUG_WLAN_SCAN , "WLAN scan"},
67 { ATH_DEBUG_WLAN_TX , "WLAN Tx"},
68 { ATH_DEBUG_WLAN_RX , "WLAN Rx"},
69 { ATH_DEBUG_HTC_RAW , "HTC Raw IF tracing"},
70 { ATH_DEBUG_HCI_BRIDGE , "HCI Bridge Setup"},
71 { ATH_DEBUG_HCI_RECV , "HCI Recv tracing"},
72 { ATH_DEBUG_HCI_DUMP , "HCI Packet dumps"},
75 ATH_DEBUG_INSTANTIATE_MODULE_VAR(driver,
77 "Linux Driver Interface",
78 ATH_DEBUG_MASK_DEFAULTS | ATH_DEBUG_WLAN_SCAN |
80 ATH_DEBUG_DESCRIPTION_COUNT(driver_debug_desc),
86 #define IS_MAC_NULL(mac) (mac[0]==0 && mac[1]==0 && mac[2]==0 && mac[3]==0 && mac[4]==0 && mac[5]==0)
87 #define IS_MAC_BCAST(mac) (*mac==0xff)
89 #define DESCRIPTION "Driver to access the Atheros AR600x Device, version " __stringify(__VER_MAJOR_) "." __stringify(__VER_MINOR_) "." __stringify(__VER_PATCH_) "." __stringify(__BUILD_NUMBER_)
91 MODULE_AUTHOR("Atheros Communications, Inc.");
92 MODULE_DESCRIPTION(DESCRIPTION);
93 MODULE_LICENSE("Dual BSD/GPL");
95 #ifndef REORG_APTC_HEURISTICS
96 #undef ADAPTIVE_POWER_THROUGHPUT_CONTROL
97 #endif /* REORG_APTC_HEURISTICS */
99 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
100 #define APTC_TRAFFIC_SAMPLING_INTERVAL 100 /* msec */
101 #define APTC_UPPER_THROUGHPUT_THRESHOLD 3000 /* Kbps */
102 #define APTC_LOWER_THROUGHPUT_THRESHOLD 2000 /* Kbps */
104 typedef struct aptc_traffic_record {
106 struct timeval samplingTS;
107 unsigned long bytesReceived;
108 unsigned long bytesTransmitted;
109 } APTC_TRAFFIC_RECORD;
112 APTC_TRAFFIC_RECORD aptcTR;
113 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
115 #ifdef EXPORT_HCI_BRIDGE_INTERFACE
116 // callbacks registered by HCI transport driver
117 HCI_TRANSPORT_CALLBACKS ar6kHciTransCallbacks = { NULL };
120 unsigned int processDot11Hdr = 0;
121 int bmienable = BMIENABLE_DEFAULT;
123 char ifname[IFNAMSIZ] = {0,};
125 int wlaninitmode = WLAN_INIT_MODE_DEFAULT;
126 static bool bypasswmi;
127 unsigned int debuglevel = 0;
128 int tspecCompliance = ATHEROS_COMPLIANCE;
129 unsigned int busspeedlow = 0;
130 unsigned int onebitmode = 0;
131 unsigned int skipflash = 0;
132 unsigned int wmitimeout = 2;
133 unsigned int wlanNodeCaching = 1;
134 unsigned int enableuartprint = ENABLEUARTPRINT_DEFAULT;
135 unsigned int logWmiRawMsgs = 0;
136 unsigned int enabletimerwar = 0;
137 unsigned int fwmode = 1;
138 unsigned int mbox_yield_limit = 99;
139 unsigned int enablerssicompensation = 0;
140 int reduce_credit_dribble = 1 + HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_ONE_HALF;
141 int allow_trace_signal = 0;
142 #ifdef CONFIG_HOST_TCMD_SUPPORT
143 unsigned int testmode =0;
146 unsigned int irqprocmode = HIF_DEVICE_IRQ_SYNC_ONLY;//HIF_DEVICE_IRQ_ASYNC_SYNC;
147 unsigned int panic_on_assert = 1;
148 unsigned int nohifscattersupport = NOHIFSCATTERSUPPORT_DEFAULT;
150 unsigned int setuphci = SETUPHCI_DEFAULT;
151 unsigned int setuphcipal = SETUPHCIPAL_DEFAULT;
152 unsigned int loghci = 0;
153 unsigned int setupbtdev = SETUPBTDEV_DEFAULT;
154 #ifndef EXPORT_HCI_BRIDGE_INTERFACE
155 unsigned int ar3khcibaud = AR3KHCIBAUD_DEFAULT;
156 unsigned int hciuartscale = HCIUARTSCALE_DEFAULT;
157 unsigned int hciuartstep = HCIUARTSTEP_DEFAULT;
159 #ifdef CONFIG_CHECKSUM_OFFLOAD
160 unsigned int csumOffload=0;
161 unsigned int csumOffloadTest=0;
163 unsigned int eppingtest=0;
165 module_param_string(ifname, ifname, sizeof(ifname), 0644);
166 module_param(wlaninitmode, int, 0644);
167 module_param(bmienable, int, 0644);
168 module_param(bypasswmi, bool, 0644);
169 module_param(debuglevel, uint, 0644);
170 module_param(tspecCompliance, int, 0644);
171 module_param(onebitmode, uint, 0644);
172 module_param(busspeedlow, uint, 0644);
173 module_param(skipflash, uint, 0644);
174 module_param(wmitimeout, uint, 0644);
175 module_param(wlanNodeCaching, uint, 0644);
176 module_param(logWmiRawMsgs, uint, 0644);
177 module_param(enableuartprint, uint, 0644);
178 module_param(enabletimerwar, uint, 0644);
179 module_param(fwmode, uint, 0644);
180 module_param(mbox_yield_limit, uint, 0644);
181 module_param(reduce_credit_dribble, int, 0644);
182 module_param(allow_trace_signal, int, 0644);
183 module_param(enablerssicompensation, uint, 0644);
184 module_param(processDot11Hdr, uint, 0644);
185 #ifdef CONFIG_CHECKSUM_OFFLOAD
186 module_param(csumOffload, uint, 0644);
188 #ifdef CONFIG_HOST_TCMD_SUPPORT
189 module_param(testmode, uint, 0644);
191 module_param(irqprocmode, uint, 0644);
192 module_param(nohifscattersupport, uint, 0644);
193 module_param(panic_on_assert, uint, 0644);
194 module_param(setuphci, uint, 0644);
195 module_param(setuphcipal, uint, 0644);
196 module_param(loghci, uint, 0644);
197 module_param(setupbtdev, uint, 0644);
198 #ifndef EXPORT_HCI_BRIDGE_INTERFACE
199 module_param(ar3khcibaud, uint, 0644);
200 module_param(hciuartscale, uint, 0644);
201 module_param(hciuartstep, uint, 0644);
203 module_param(eppingtest, uint, 0644);
205 /* in 2.6.10 and later this is now a pointer to a uint */
206 unsigned int _mboxnum = HTC_MAILBOX_NUM_MAX;
207 #define mboxnum &_mboxnum
210 u32 g_dbg_flags = DBG_DEFAULTS;
211 unsigned int debugflags = 0;
213 unsigned int debughtc = 0;
214 unsigned int debugbmi = 0;
215 unsigned int debughif = 0;
216 unsigned int txcreditsavailable[HTC_MAILBOX_NUM_MAX] = {0};
217 unsigned int txcreditsconsumed[HTC_MAILBOX_NUM_MAX] = {0};
218 unsigned int txcreditintrenable[HTC_MAILBOX_NUM_MAX] = {0};
219 unsigned int txcreditintrenableaggregate[HTC_MAILBOX_NUM_MAX] = {0};
220 module_param(debugflags, uint, 0644);
221 module_param(debugdriver, int, 0644);
222 module_param(debughtc, uint, 0644);
223 module_param(debugbmi, uint, 0644);
224 module_param(debughif, uint, 0644);
225 module_param_array(txcreditsavailable, uint, mboxnum, 0644);
226 module_param_array(txcreditsconsumed, uint, mboxnum, 0644);
227 module_param_array(txcreditintrenable, uint, mboxnum, 0644);
228 module_param_array(txcreditintrenableaggregate, uint, mboxnum, 0644);
232 unsigned int resetok = 1;
233 unsigned int tx_attempt[HTC_MAILBOX_NUM_MAX] = {0};
234 unsigned int tx_post[HTC_MAILBOX_NUM_MAX] = {0};
235 unsigned int tx_complete[HTC_MAILBOX_NUM_MAX] = {0};
236 unsigned int hifBusRequestNumMax = 40;
237 unsigned int war23838_disabled = 0;
238 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
239 unsigned int enableAPTCHeuristics = 1;
240 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
241 module_param_array(tx_attempt, uint, mboxnum, 0644);
242 module_param_array(tx_post, uint, mboxnum, 0644);
243 module_param_array(tx_complete, uint, mboxnum, 0644);
244 module_param(hifBusRequestNumMax, uint, 0644);
245 module_param(war23838_disabled, uint, 0644);
246 module_param(resetok, uint, 0644);
247 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
248 module_param(enableAPTCHeuristics, uint, 0644);
249 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
251 #ifdef BLOCK_TX_PATH_FLAG
253 module_param(blocktx, int, 0644);
254 #endif /* BLOCK_TX_PATH_FLAG */
256 typedef struct user_rssi_compensation_t {
268 } USER_RSSI_CPENSATION;
270 static USER_RSSI_CPENSATION rssi_compensation_param;
272 static s16 rssi_compensation_table[96];
274 int reconnect_flag = 0;
275 static ar6k_pal_config_t ar6k_pal_config_g;
277 /* Function declarations */
278 static int ar6000_init_module(void);
279 static void ar6000_cleanup_module(void);
281 int ar6000_init(struct net_device *dev);
282 static int ar6000_open(struct net_device *dev);
283 static int ar6000_close(struct net_device *dev);
284 static void ar6000_init_control_info(AR_SOFTC_T *ar);
285 static int ar6000_data_tx(struct sk_buff *skb, struct net_device *dev);
287 void ar6000_destroy(struct net_device *dev, unsigned int unregister);
288 static void ar6000_detect_error(unsigned long ptr);
289 static void ar6000_set_multicast_list(struct net_device *dev);
290 static struct net_device_stats *ar6000_get_stats(struct net_device *dev);
291 static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev);
293 static void disconnect_timer_handler(unsigned long ptr);
295 void read_rssi_compensation_param(AR_SOFTC_T *ar);
297 /* for android builds we call external APIs that handle firmware download and configuration */
299 /* !!!! Interim android support to make it easier to patch the default driver for
300 * android use. You must define an external source file ar6000_android.c that handles the following
302 extern void android_module_init(OSDRV_CALLBACKS *osdrvCallbacks);
303 extern void android_module_exit(void);
306 * HTC service connection handlers
308 static int ar6000_avail_ev(void *context, void *hif_handle);
310 static int ar6000_unavail_ev(void *context, void *hif_handle);
312 int ar6000_configure_target(AR_SOFTC_T *ar);
314 static void ar6000_target_failure(void *Instance, int Status);
316 static void ar6000_rx(void *Context, HTC_PACKET *pPacket);
318 static void ar6000_rx_refill(void *Context,HTC_ENDPOINT_ID Endpoint);
320 static void ar6000_tx_complete(void *Context, HTC_PACKET_QUEUE *pPackets);
322 static HTC_SEND_FULL_ACTION ar6000_tx_queue_full(void *Context, HTC_PACKET *pPacket);
324 #ifdef ATH_AR6K_11N_SUPPORT
325 static void ar6000_alloc_netbufs(A_NETBUF_QUEUE_T *q, u16 num);
327 static void ar6000_deliver_frames_to_nw_stack(void * dev, void *osbuf);
328 //static void ar6000_deliver_frames_to_bt_stack(void * dev, void *osbuf);
330 static HTC_PACKET *ar6000_alloc_amsdu_rxbuf(void *Context, HTC_ENDPOINT_ID Endpoint, int Length);
332 static void ar6000_refill_amsdu_rxbufs(AR_SOFTC_T *ar, int Count);
334 static void ar6000_cleanup_amsdu_rxbufs(AR_SOFTC_T *ar);
337 ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj,
338 struct bin_attribute *bin_attr,
339 char *buf, loff_t pos, size_t count);
342 ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj,
343 struct bin_attribute *bin_attr,
344 char *buf, loff_t pos, size_t count);
347 ar6000_sysfs_bmi_init(AR_SOFTC_T *ar);
349 /* HCI PAL callback function declarations */
350 int ar6k_setup_hci_pal(AR_SOFTC_T *ar);
351 void ar6k_cleanup_hci_pal(AR_SOFTC_T *ar);
354 ar6000_sysfs_bmi_deinit(AR_SOFTC_T *ar);
357 ar6000_sysfs_bmi_get_config(AR_SOFTC_T *ar, u32 mode);
363 struct net_device *ar6000_devices[MAX_AR6000];
364 static int is_netdev_registered;
365 extern struct iw_handler_def ath_iw_handler_def;
366 DECLARE_WAIT_QUEUE_HEAD(arEvent);
367 static void ar6000_cookie_init(AR_SOFTC_T *ar);
368 static void ar6000_cookie_cleanup(AR_SOFTC_T *ar);
369 static void ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie);
370 static struct ar_cookie *ar6000_alloc_cookie(AR_SOFTC_T *ar);
373 static int ar6000_reinstall_keys(AR_SOFTC_T *ar,u8 key_op_ctrl);
376 #ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT
377 struct net_device *arApNetDev;
378 #endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
380 static struct ar_cookie s_ar_cookie_mem[MAX_COOKIE_NUM];
382 #define HOST_INTEREST_ITEM_ADDRESS(ar, item) \
383 (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_HOST_INTEREST_ITEM_ADDRESS(item) : \
384 (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_HOST_INTEREST_ITEM_ADDRESS(item) : 0))
387 static struct net_device_ops ar6000_netdev_ops = {
389 .ndo_open = ar6000_open,
390 .ndo_stop = ar6000_close,
391 .ndo_get_stats = ar6000_get_stats,
392 .ndo_do_ioctl = ar6000_ioctl,
393 .ndo_start_xmit = ar6000_data_tx,
394 .ndo_set_multicast_list = ar6000_set_multicast_list,
397 /* Debug log support */
400 * Flag to govern whether the debug logs should be parsed in the kernel
401 * or reported to the application.
403 #define REPORT_DEBUG_LOGS_TO_APP
406 ar6000_set_host_app_area(AR_SOFTC_T *ar)
409 struct host_app_area_s host_app_area;
411 /* Fetch the address of the host_app_area_s instance in the host interest area */
412 address = TARG_VTOP(ar->arTargetType, HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest));
413 if (ar6000_ReadRegDiag(ar->arHifDevice, &address, &data) != A_OK) {
416 address = TARG_VTOP(ar->arTargetType, data);
417 host_app_area.wmi_protocol_ver = WMI_PROTOCOL_VERSION;
418 if (ar6000_WriteDataDiag(ar->arHifDevice, address,
419 (A_UCHAR *)&host_app_area,
420 sizeof(struct host_app_area_s)) != A_OK)
428 u32 dbglog_get_debug_hdr_ptr(AR_SOFTC_T *ar)
434 address = TARG_VTOP(ar->arTargetType, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbglog_hdr));
435 if ((status = ar6000_ReadDataDiag(ar->arHifDevice, address,
436 (A_UCHAR *)¶m, 4)) != A_OK)
445 * The dbglog module has been initialized. Its ok to access the relevant
446 * data stuctures over the diagnostic window.
449 ar6000_dbglog_init_done(AR_SOFTC_T *ar)
451 ar->dbglog_init_done = true;
454 u32 dbglog_get_debug_fragment(s8 *datap, u32 len, u32 limit)
463 buffer = (s32 *)datap;
464 length = (limit >> 2);
469 while (count < length) {
470 numargs = DBGLOG_GET_NUMARGS(buffer[count]);
471 fraglen = (count << 2);
472 count += numargs + 1;
480 dbglog_parse_debug_logs(s8 *datap, u32 len)
491 buffer = (s32 *)datap;
493 while (count < length) {
494 debugid = DBGLOG_GET_DBGID(buffer[count]);
495 moduleid = DBGLOG_GET_MODULEID(buffer[count]);
496 numargs = DBGLOG_GET_NUMARGS(buffer[count]);
497 timestamp = DBGLOG_GET_TIMESTAMP(buffer[count]);
500 AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d)\n", moduleid, debugid, timestamp));
504 AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d): 0x%x\n", moduleid, debugid,
505 timestamp, buffer[count+1]));
509 AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("%d %d (%d): 0x%x, 0x%x\n", moduleid, debugid,
510 timestamp, buffer[count+1], buffer[count+2]));
514 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Invalid args: %d\n", numargs));
516 count += numargs + 1;
521 ar6000_dbglog_get_debug_logs(AR_SOFTC_T *ar)
523 u32 data[8]; /* Should be able to accomodate struct dbglog_buf_s */
530 if (!ar->dbglog_init_done) return A_ERROR;
533 AR6000_SPIN_LOCK(&ar->arLock, 0);
535 if (ar->dbgLogFetchInProgress) {
536 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
540 /* block out others */
541 ar->dbgLogFetchInProgress = true;
543 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
545 debug_hdr_ptr = dbglog_get_debug_hdr_ptr(ar);
546 printk("debug_hdr_ptr: 0x%x\n", debug_hdr_ptr);
548 /* Get the contents of the ring buffer */
550 address = TARG_VTOP(ar->arTargetType, debug_hdr_ptr);
551 length = 4 /* sizeof(dbuf) */ + 4 /* sizeof(dropped) */;
552 A_MEMZERO(data, sizeof(data));
553 ar6000_ReadDataDiag(ar->arHifDevice, address, (A_UCHAR *)data, length);
554 address = TARG_VTOP(ar->arTargetType, data[0] /* dbuf */);
556 dropped = data[1]; /* dropped */
557 length = 4 /* sizeof(next) */ + 4 /* sizeof(buffer) */ + 4 /* sizeof(bufsize) */ + 4 /* sizeof(length) */ + 4 /* sizeof(count) */ + 4 /* sizeof(free) */;
558 A_MEMZERO(data, sizeof(data));
559 ar6000_ReadDataDiag(ar->arHifDevice, address, (A_UCHAR *)&data, length);
562 address = TARG_VTOP(ar->arTargetType, data[1] /* buffer*/);
563 length = data[3]; /* length */
564 if ((length) && (length <= data[2] /* bufsize*/)) {
565 /* Rewind the index if it is about to overrun the buffer */
566 if (ar->log_cnt > (DBGLOG_HOST_LOG_BUFFER_SIZE - length)) {
569 if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
570 (A_UCHAR *)&ar->log_buffer[ar->log_cnt], length))
574 ar6000_dbglog_event(ar, dropped, (s8 *)&ar->log_buffer[ar->log_cnt], length);
575 ar->log_cnt += length;
577 AR_DEBUG_PRINTF(ATH_DEBUG_DBG_LOG,("Length: %d (Total size: %d)\n",
581 address = TARG_VTOP(ar->arTargetType, data[0] /* next */);
582 length = 4 /* sizeof(next) */ + 4 /* sizeof(buffer) */ + 4 /* sizeof(bufsize) */ + 4 /* sizeof(length) */ + 4 /* sizeof(count) */ + 4 /* sizeof(free) */;
583 A_MEMZERO(data, sizeof(data));
584 if(A_OK != ar6000_ReadDataDiag(ar->arHifDevice, address,
585 (A_UCHAR *)&data, length))
590 } while (address != firstbuf);
593 ar->dbgLogFetchInProgress = false;
599 ar6000_dbglog_event(AR_SOFTC_T *ar, u32 dropped,
600 s8 *buffer, u32 length)
602 #ifdef REPORT_DEBUG_LOGS_TO_APP
603 #define MAX_WIRELESS_EVENT_SIZE 252
605 * Break it up into chunks of MAX_WIRELESS_EVENT_SIZE bytes of messages.
606 * There seems to be a limitation on the length of message that could be
607 * transmitted to the user app via this mechanism.
612 send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
613 MAX_WIRELESS_EVENT_SIZE);
615 ar6000_send_event_to_app(ar, WMIX_DBGLOG_EVENTID, (u8 *)&buffer[sent], send);
617 send = dbglog_get_debug_fragment(&buffer[sent], length - sent,
618 MAX_WIRELESS_EVENT_SIZE);
621 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Dropped logs: 0x%x\nDebug info length: %d\n",
624 /* Interpret the debug logs */
625 dbglog_parse_debug_logs((s8 *)buffer, length);
626 #endif /* REPORT_DEBUG_LOGS_TO_APP */
631 ar6000_init_module(void)
633 static int probed = 0;
635 OSDRV_CALLBACKS osdrvCallbacks;
637 a_module_debug_support_init();
640 /* check for debug mask overrides */
642 ATH_DEBUG_SET_DEBUG_MASK(htc,debughtc);
645 ATH_DEBUG_SET_DEBUG_MASK(bmi,debugbmi);
648 ATH_DEBUG_SET_DEBUG_MASK(hif,debughif);
650 if (debugdriver != 0) {
651 ATH_DEBUG_SET_DEBUG_MASK(driver,debugdriver);
656 A_REGISTER_MODULE_DEBUG_INFO(driver);
658 A_MEMZERO(&osdrvCallbacks,sizeof(osdrvCallbacks));
659 osdrvCallbacks.deviceInsertedHandler = ar6000_avail_ev;
660 osdrvCallbacks.deviceRemovedHandler = ar6000_unavail_ev;
662 osdrvCallbacks.deviceSuspendHandler = ar6000_suspend_ev;
663 osdrvCallbacks.deviceResumeHandler = ar6000_resume_ev;
664 osdrvCallbacks.devicePowerChangeHandler = ar6000_power_change_ev;
670 android_module_init(&osdrvCallbacks);
674 /* Set the debug flags if specified at load time */
677 g_dbg_flags = debugflags;
686 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
687 memset(&aptcTR, 0, sizeof(APTC_TRAFFIC_RECORD));
688 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
690 #ifdef CONFIG_HOST_GPIO_SUPPORT
692 #endif /* CONFIG_HOST_GPIO_SUPPORT */
694 status = HIFInit(&osdrvCallbacks);
702 ar6000_cleanup_module(void)
705 struct net_device *ar6000_netdev;
707 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
708 /* Delete the Adaptive Power Control timer */
709 if (timer_pending(&aptcTimer)) {
710 del_timer_sync(&aptcTimer);
712 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
714 for (i=0; i < MAX_AR6000; i++) {
715 if (ar6000_devices[i] != NULL) {
716 ar6000_netdev = ar6000_devices[i];
717 ar6000_devices[i] = NULL;
718 ar6000_destroy(ar6000_netdev, 1);
722 HIFShutDownDevice(NULL);
724 a_module_debug_support_cleanup();
729 android_module_exit();
732 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_cleanup: success\n"));
735 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
737 aptcTimerHandler(unsigned long arg)
744 ar = (AR_SOFTC_T *)arg;
745 A_ASSERT(ar != NULL);
746 A_ASSERT(!timer_pending(&aptcTimer));
748 AR6000_SPIN_LOCK(&ar->arLock, 0);
750 /* Get the number of bytes transferred */
751 numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
752 aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
754 /* Calculate and decide based on throughput thresholds */
755 throughput = ((numbytes * 8)/APTC_TRAFFIC_SAMPLING_INTERVAL); /* Kbps */
756 if (throughput < APTC_LOWER_THROUGHPUT_THRESHOLD) {
757 /* Enable Sleep and delete the timer */
758 A_ASSERT(ar->arWmiReady == true);
759 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
760 status = wmi_powermode_cmd(ar->arWmi, REC_POWER);
761 AR6000_SPIN_LOCK(&ar->arLock, 0);
762 A_ASSERT(status == A_OK);
763 aptcTR.timerScheduled = false;
765 A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
768 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
770 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
772 #ifdef ATH_AR6K_11N_SUPPORT
774 ar6000_alloc_netbufs(A_NETBUF_QUEUE_T *q, u16 num)
779 if((osbuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE))) {
780 A_NETBUF_ENQUEUE(q, osbuf);
788 A_PRINTF("%s(), allocation of netbuf failed", __func__);
793 static struct bin_attribute bmi_attr = {
794 .attr = {.name = "bmi", .mode = 0600},
795 .read = ar6000_sysfs_bmi_read,
796 .write = ar6000_sysfs_bmi_write,
800 ar6000_sysfs_bmi_read(struct file *fp, struct kobject *kobj,
801 struct bin_attribute *bin_attr,
802 char *buf, loff_t pos, size_t count)
806 HIF_DEVICE_OS_DEVICE_INFO *osDevInfo;
808 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Read %d bytes\n", (u32)count));
809 for (index=0; index < MAX_AR6000; index++) {
810 ar = (AR_SOFTC_T *)ar6k_priv(ar6000_devices[index]);
811 osDevInfo = &ar->osDevInfo;
812 if (kobj == (&(((struct device *)osDevInfo->pOSDevice)->kobj))) {
817 if (index == MAX_AR6000) return 0;
819 if ((BMIRawRead(ar->arHifDevice, (A_UCHAR*)buf, count, true)) != A_OK) {
827 ar6000_sysfs_bmi_write(struct file *fp, struct kobject *kobj,
828 struct bin_attribute *bin_attr,
829 char *buf, loff_t pos, size_t count)
833 HIF_DEVICE_OS_DEVICE_INFO *osDevInfo;
835 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Write %d bytes\n", (u32)count));
836 for (index=0; index < MAX_AR6000; index++) {
837 ar = (AR_SOFTC_T *)ar6k_priv(ar6000_devices[index]);
838 osDevInfo = &ar->osDevInfo;
839 if (kobj == (&(((struct device *)osDevInfo->pOSDevice)->kobj))) {
844 if (index == MAX_AR6000) return 0;
846 if ((BMIRawWrite(ar->arHifDevice, (A_UCHAR*)buf, count)) != A_OK) {
854 ar6000_sysfs_bmi_init(AR_SOFTC_T *ar)
858 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Creating sysfs entry\n"));
859 A_MEMZERO(&ar->osDevInfo, sizeof(HIF_DEVICE_OS_DEVICE_INFO));
861 /* Get the underlying OS device */
862 status = HIFConfigureDevice(ar->arHifDevice,
863 HIF_DEVICE_GET_OS_DEVICE,
865 sizeof(HIF_DEVICE_OS_DEVICE_INFO));
868 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Failed to get OS device info from HIF\n"));
872 /* Create a bmi entry in the sysfs filesystem */
873 if ((sysfs_create_bin_file(&(((struct device *)ar->osDevInfo.pOSDevice)->kobj), &bmi_attr)) < 0)
875 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMI: Failed to create entry for bmi in sysfs filesystem\n"));
883 ar6000_sysfs_bmi_deinit(AR_SOFTC_T *ar)
885 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Deleting sysfs entry\n"));
887 sysfs_remove_bin_file(&(((struct device *)ar->osDevInfo.pOSDevice)->kobj), &bmi_attr);
890 #define bmifn(fn) do { \
892 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__)); \
897 #ifdef INIT_MODE_DRV_ENABLED
899 #ifdef SOFTMAC_FILE_USED
900 #define AR6002_MAC_ADDRESS_OFFSET 0x0A
901 #define AR6003_MAC_ADDRESS_OFFSET 0x16
903 void calculate_crc(u32 TargetType, A_UCHAR *eeprom_data)
911 if (TargetType == TARGET_TYPE_AR6001)
914 ptr_crc = (u16 *)eeprom_data;
916 else if (TargetType == TARGET_TYPE_AR6003)
919 ptr_crc = (u16 *)((A_UCHAR *)eeprom_data + 0x04);
924 ptr_crc = (u16 *)((A_UCHAR *)eeprom_data + 0x04);
931 // Recalculate new CRC
933 ptr16_eeprom = (u16 *)eeprom_data;
934 for (i = 0;i < eeprom_size; i += 2)
936 checksum = checksum ^ (*ptr16_eeprom);
939 checksum = 0xFFFF ^ checksum;
944 ar6000_softmac_update(AR_SOFTC_T *ar, A_UCHAR *eeprom_data, size_t size)
946 const char *source = "random generated";
947 const struct firmware *softmac_entry;
949 switch (ar->arTargetType) {
950 case TARGET_TYPE_AR6002:
951 ptr_mac = (u8 *)((A_UCHAR *)eeprom_data + AR6002_MAC_ADDRESS_OFFSET);
953 case TARGET_TYPE_AR6003:
954 ptr_mac = (u8 *)((A_UCHAR *)eeprom_data + AR6003_MAC_ADDRESS_OFFSET);
957 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Invalid Target Type\n"));
960 printk(KERN_DEBUG "MAC from EEPROM %pM\n", ptr_mac);
962 /* create a random MAC in case we cannot read file from system */
966 ptr_mac[3] = random32() & 0xff;
967 ptr_mac[4] = random32() & 0xff;
968 ptr_mac[5] = random32() & 0xff;
969 if ((A_REQUEST_FIRMWARE(&softmac_entry, "softmac", ((struct device *)ar->osDevInfo.pOSDevice))) == 0)
971 char *macbuf = A_MALLOC_NOWAIT(softmac_entry->size+1);
973 unsigned int softmac[6];
974 memcpy(macbuf, softmac_entry->data, softmac_entry->size);
975 macbuf[softmac_entry->size] = '\0';
976 if (sscanf(macbuf, "%02x:%02x:%02x:%02x:%02x:%02x",
977 &softmac[0], &softmac[1], &softmac[2],
978 &softmac[3], &softmac[4], &softmac[5])==6) {
980 for (i=0; i<6; ++i) {
981 ptr_mac[i] = softmac[i] & 0xff;
983 source = "softmac file";
987 A_RELEASE_FIRMWARE(softmac_entry);
989 printk(KERN_DEBUG "MAC from %s %pM\n", source, ptr_mac);
990 calculate_crc(ar->arTargetType, eeprom_data);
992 #endif /* SOFTMAC_FILE_USED */
995 ar6000_transfer_bin_file(AR_SOFTC_T *ar, AR6K_BIN_FILE file, u32 address, bool compressed)
998 const char *filename;
999 const struct firmware *fw_entry;
1004 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1005 filename = AR6003_REV1_OTP_FILE;
1006 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1007 filename = AR6003_REV2_OTP_FILE;
1009 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1014 case AR6K_FIRMWARE_FILE:
1015 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1016 filename = AR6003_REV1_FIRMWARE_FILE;
1017 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1018 filename = AR6003_REV2_FIRMWARE_FILE;
1020 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1026 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1027 filename = AR6003_REV1_EPPING_FIRMWARE_FILE;
1028 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1029 filename = AR6003_REV2_EPPING_FIRMWARE_FILE;
1031 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("eppingtest : unsupported firmware revision: %d\n",
1032 ar->arVersion.target_ver));
1038 #ifdef CONFIG_HOST_TCMD_SUPPORT
1040 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1041 filename = AR6003_REV1_TCMD_FIRMWARE_FILE;
1042 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1043 filename = AR6003_REV2_TCMD_FIRMWARE_FILE;
1045 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1051 #ifdef HTC_RAW_INTERFACE
1052 if (!eppingtest && bypasswmi) {
1053 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1054 filename = AR6003_REV1_ART_FIRMWARE_FILE;
1055 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1056 filename = AR6003_REV2_ART_FIRMWARE_FILE;
1058 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1066 case AR6K_PATCH_FILE:
1067 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1068 filename = AR6003_REV1_PATCH_FILE;
1069 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1070 filename = AR6003_REV2_PATCH_FILE;
1072 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1077 case AR6K_BOARD_DATA_FILE:
1078 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1079 filename = AR6003_REV1_BOARD_DATA_FILE;
1080 } else if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1081 filename = AR6003_REV2_BOARD_DATA_FILE;
1083 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown firmware revision: %d\n", ar->arVersion.target_ver));
1089 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Unknown file type: %d\n", file));
1092 if ((A_REQUEST_FIRMWARE(&fw_entry, filename, ((struct device *)ar->osDevInfo.pOSDevice))) != 0)
1094 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Failed to get %s\n", filename));
1098 #ifdef SOFTMAC_FILE_USED
1099 if (file==AR6K_BOARD_DATA_FILE && fw_entry->data) {
1100 ar6000_softmac_update(ar, (A_UCHAR *)fw_entry->data, fw_entry->size);
1105 fw_entry_size = fw_entry->size;
1107 /* Load extended board data for AR6003 */
1108 if ((file==AR6K_BOARD_DATA_FILE) && (fw_entry->data)) {
1109 u32 board_ext_address;
1110 u32 board_ext_data_size;
1111 u32 board_data_size;
1113 board_ext_data_size = (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_BOARD_EXT_DATA_SZ : \
1114 (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_EXT_DATA_SZ : 0));
1116 board_data_size = (((ar)->arTargetType == TARGET_TYPE_AR6002) ? AR6002_BOARD_DATA_SZ : \
1117 (((ar)->arTargetType == TARGET_TYPE_AR6003) ? AR6003_BOARD_DATA_SZ : 0));
1119 /* Determine where in Target RAM to write Board Data */
1120 bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data), (A_UCHAR *)&board_ext_address, 4));
1121 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board extended Data download address: 0x%x\n", board_ext_address));
1123 /* check whether the target has allocated memory for extended board data and file contains extended board data */
1124 if ((board_ext_address) && (fw_entry->size == (board_data_size + board_ext_data_size))) {
1127 status = BMIWriteMemory(ar->arHifDevice, board_ext_address, (A_UCHAR *)(fw_entry->data + board_data_size), board_ext_data_size);
1129 if (status != A_OK) {
1130 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
1131 A_RELEASE_FIRMWARE(fw_entry);
1135 /* Record the fact that extended board Data IS initialized */
1137 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data_initialized), (A_UCHAR *)¶m, 4));
1139 fw_entry_size = board_data_size;
1143 status = BMIFastDownload(ar->arHifDevice, address, (A_UCHAR *)fw_entry->data, fw_entry_size);
1145 status = BMIWriteMemory(ar->arHifDevice, address, (A_UCHAR *)fw_entry->data, fw_entry_size);
1148 if (status != A_OK) {
1149 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI operation failed: %d\n", __LINE__));
1150 A_RELEASE_FIRMWARE(fw_entry);
1153 A_RELEASE_FIRMWARE(fw_entry);
1156 #endif /* INIT_MODE_DRV_ENABLED */
1159 ar6000_update_bdaddr(AR_SOFTC_T *ar)
1162 if (setupbtdev != 0) {
1165 if (BMIReadMemory(ar->arHifDevice,
1166 HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (A_UCHAR *)&address, 4) != A_OK)
1168 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for hi_board_data failed\n"));
1172 if (BMIReadMemory(ar->arHifDevice, address + BDATA_BDADDR_OFFSET, (A_UCHAR *)ar->bdaddr, 6) != A_OK)
1174 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for BD address failed\n"));
1177 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BDADDR 0x%x:0x%x:0x%x:0x%x:0x%x:0x%x\n", ar->bdaddr[0],
1178 ar->bdaddr[1], ar->bdaddr[2], ar->bdaddr[3],
1179 ar->bdaddr[4], ar->bdaddr[5]));
1186 ar6000_sysfs_bmi_get_config(AR_SOFTC_T *ar, u32 mode)
1188 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BMI: Requesting device specific configuration\n"));
1190 if (mode == WLAN_INIT_MODE_UDEV) {
1192 const struct firmware *fw_entry;
1194 /* Get config using udev through a script in user space */
1195 sprintf(version, "%2.2x", ar->arVersion.target_ver);
1196 if ((A_REQUEST_FIRMWARE(&fw_entry, version, ((struct device *)ar->osDevInfo.pOSDevice))) != 0)
1198 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("BMI: Failure to get configuration for target version: %s\n", version));
1202 A_RELEASE_FIRMWARE(fw_entry);
1203 #ifdef INIT_MODE_DRV_ENABLED
1205 /* The config is contained within the driver itself */
1207 u32 param, options, sleep, address;
1209 /* Temporarily disable system sleep */
1210 address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS;
1211 bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
1213 param |= AR6K_OPTION_SLEEP_DISABLE;
1214 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1216 address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS;
1217 bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
1219 param |= WLAN_SYSTEM_SLEEP_DISABLE_SET(1);
1220 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1221 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("old options: %d, old sleep: %d\n", options, sleep));
1223 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1224 /* Program analog PLL register */
1225 bmifn(BMIWriteSOCRegister(ar->arHifDevice, ANALOG_INTF_BASE_ADDRESS + 0x284, 0xF9104001));
1226 /* Run at 80/88MHz by default */
1227 param = CPU_CLOCK_STANDARD_SET(1);
1229 /* Run at 40/44MHz by default */
1230 param = CPU_CLOCK_STANDARD_SET(0);
1232 address = RTC_BASE_ADDRESS + CPU_CLOCK_ADDRESS;
1233 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1236 if (ar->arTargetType == TARGET_TYPE_AR6002) {
1237 bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (A_UCHAR *)¶m, 4));
1240 /* LPO_CAL.ENABLE = 1 if no external clk is detected */
1242 address = RTC_BASE_ADDRESS + LPO_CAL_ADDRESS;
1243 param = LPO_CAL_ENABLE_SET(1);
1244 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1247 /* Venus2.0: Lower SDIO pad drive strength,
1248 * temporary WAR to avoid SDIO CRC error */
1249 if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1250 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("AR6K: Temporary WAR to avoid SDIO CRC error\n"));
1252 address = GPIO_BASE_ADDRESS + GPIO_PIN10_ADDRESS;
1253 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1255 address = GPIO_BASE_ADDRESS + GPIO_PIN11_ADDRESS;
1256 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1258 address = GPIO_BASE_ADDRESS + GPIO_PIN12_ADDRESS;
1259 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1261 address = GPIO_BASE_ADDRESS + GPIO_PIN13_ADDRESS;
1262 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1265 #ifdef FORCE_INTERNAL_CLOCK
1266 /* Ignore external clock, if any, and force use of internal clock */
1267 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1268 /* hi_ext_clk_detected = 0 */
1270 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_ext_clk_detected), (A_UCHAR *)¶m, 4));
1272 /* CLOCK_CONTROL &= ~LF_CLK32 */
1273 address = RTC_BASE_ADDRESS + CLOCK_CONTROL_ADDRESS;
1274 bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
1275 param &= (~CLOCK_CONTROL_LF_CLK32_SET(1));
1276 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1278 #endif /* FORCE_INTERNAL_CLOCK */
1280 /* Transfer Board Data from Target EEPROM to Target RAM */
1281 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1282 /* Determine where in Target RAM to write Board Data */
1283 bmifn(BMIReadMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data), (A_UCHAR *)&address, 4));
1284 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("Board Data download address: 0x%x\n", address));
1286 /* Write EEPROM data to Target RAM */
1287 if ((ar6000_transfer_bin_file(ar, AR6K_BOARD_DATA_FILE, address, false)) != A_OK) {
1291 /* Record the fact that Board Data IS initialized */
1293 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_data_initialized), (A_UCHAR *)¶m, 4));
1295 /* Transfer One time Programmable data */
1296 AR6K_DATA_DOWNLOAD_ADDRESS(address, ar->arVersion.target_ver);
1297 status = ar6000_transfer_bin_file(ar, AR6K_OTP_FILE, address, true);
1298 if (status == A_OK) {
1299 /* Execute the OTP code */
1301 AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver);
1302 bmifn(BMIExecute(ar->arHifDevice, address, ¶m));
1303 } else if (status != A_ENOENT) {
1307 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("Programming of board data for chip %d not supported\n", ar->arTargetType));
1311 /* Download Target firmware */
1312 AR6K_DATA_DOWNLOAD_ADDRESS(address, ar->arVersion.target_ver);
1313 if ((ar6000_transfer_bin_file(ar, AR6K_FIRMWARE_FILE, address, true)) != A_OK) {
1317 /* Set starting address for firmware */
1318 AR6K_APP_START_OVERRIDE_ADDRESS(address, ar->arVersion.target_ver);
1319 bmifn(BMISetAppStart(ar->arHifDevice, address));
1321 /* Apply the patches */
1322 AR6K_PATCH_DOWNLOAD_ADDRESS(address, ar->arVersion.target_ver);
1323 if ((ar6000_transfer_bin_file(ar, AR6K_PATCH_FILE, address, false)) != A_OK) {
1328 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dset_list_head), (A_UCHAR *)¶m, 4));
1330 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1331 if (ar->arVersion.target_ver == AR6003_REV1_VERSION) {
1332 /* Reserve 5.5K of RAM */
1334 } else { /* AR6003_REV2_VERSION */
1335 /* Reserve 6.5K of RAM */
1338 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_end_RAM_reserve_sz), (A_UCHAR *)¶m, 4));
1341 /* Restore system sleep */
1342 address = RTC_BASE_ADDRESS + SYSTEM_SLEEP_ADDRESS;
1343 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, sleep));
1345 address = MBOX_BASE_ADDRESS + LOCAL_SCRATCH_ADDRESS;
1346 param = options | 0x20;
1347 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1349 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1350 /* Configure GPIO AR6003 UART */
1351 #ifndef CONFIG_AR600x_DEBUG_UART_TX_PIN
1352 #define CONFIG_AR600x_DEBUG_UART_TX_PIN 8
1354 param = CONFIG_AR600x_DEBUG_UART_TX_PIN;
1355 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_dbg_uart_txpin), (A_UCHAR *)¶m, 4));
1357 #if (CONFIG_AR600x_DEBUG_UART_TX_PIN == 23)
1359 address = GPIO_BASE_ADDRESS + CLOCK_GPIO_ADDRESS;
1360 bmifn(BMIReadSOCRegister(ar->arHifDevice, address, ¶m));
1361 param |= CLOCK_GPIO_BT_CLK_OUT_EN_SET(1);
1362 bmifn(BMIWriteSOCRegister(ar->arHifDevice, address, param));
1366 /* Configure GPIO for BT Reset */
1367 #ifdef ATH6KL_CONFIG_GPIO_BT_RESET
1368 #define CONFIG_AR600x_BT_RESET_PIN 0x16
1369 param = CONFIG_AR600x_BT_RESET_PIN;
1370 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_support_pins), (A_UCHAR *)¶m, 4));
1371 #endif /* ATH6KL_CONFIG_GPIO_BT_RESET */
1373 /* Configure UART flow control polarity */
1374 #ifndef CONFIG_ATH6KL_BT_UART_FC_POLARITY
1375 #define CONFIG_ATH6KL_BT_UART_FC_POLARITY 0
1378 #if (CONFIG_ATH6KL_BT_UART_FC_POLARITY == 1)
1379 if (ar->arVersion.target_ver == AR6003_REV2_VERSION) {
1380 param = ((CONFIG_ATH6KL_BT_UART_FC_POLARITY << 1) & 0x2);
1381 bmifn(BMIWriteMemory(ar->arHifDevice, HOST_INTEREST_ITEM_ADDRESS(ar, hi_hci_uart_pwr_mgmt_params), (A_UCHAR *)¶m, 4));
1383 #endif /* CONFIG_ATH6KL_BT_UART_FC_POLARITY */
1386 #ifdef HTC_RAW_INTERFACE
1387 if (!eppingtest && bypasswmi) {
1388 /* Don't run BMIDone for ART mode and force resetok=0 */
1392 #endif /* HTC_RAW_INTERFACE */
1394 #endif /* INIT_MODE_DRV_ENABLED */
1401 ar6000_configure_target(AR_SOFTC_T *ar)
1404 if (enableuartprint) {
1406 if (BMIWriteMemory(ar->arHifDevice,
1407 HOST_INTEREST_ITEM_ADDRESS(ar, hi_serial_enable),
1411 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enableuartprint failed \n"));
1414 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Serial console prints enabled\n"));
1417 /* Tell target which HTC version it is used*/
1418 param = HTC_PROTOCOL_VERSION;
1419 if (BMIWriteMemory(ar->arHifDevice,
1420 HOST_INTEREST_ITEM_ADDRESS(ar, hi_app_host_interest),
1424 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for htc version failed \n"));
1428 #ifdef CONFIG_HOST_TCMD_SUPPORT
1430 ar->arTargetMode = AR6000_TCMD_MODE;
1432 ar->arTargetMode = AR6000_WLAN_MODE;
1435 if (enabletimerwar) {
1438 if (BMIReadMemory(ar->arHifDevice,
1439 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1443 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for enabletimerwar failed \n"));
1447 param |= HI_OPTION_TIMER_WAR;
1449 if (BMIWriteMemory(ar->arHifDevice,
1450 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1454 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for enabletimerwar failed \n"));
1457 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Timer WAR enabled\n"));
1460 /* set the firmware mode to STA/IBSS/AP */
1464 if (BMIReadMemory(ar->arHifDevice,
1465 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1469 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for setting fwmode failed \n"));
1473 param |= (fwmode << HI_OPTION_FW_MODE_SHIFT);
1475 if (BMIWriteMemory(ar->arHifDevice,
1476 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1480 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for setting fwmode failed \n"));
1483 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n"));
1486 #ifdef ATH6KL_DISABLE_TARGET_DBGLOGS
1490 if (BMIReadMemory(ar->arHifDevice,
1491 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1495 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIReadMemory for disabling debug logs failed\n"));
1499 param |= HI_OPTION_DISABLE_DBGLOG;
1501 if (BMIWriteMemory(ar->arHifDevice,
1502 HOST_INTEREST_ITEM_ADDRESS(ar, hi_option_flag),
1506 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for HI_OPTION_DISABLE_DBGLOG\n"));
1509 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Firmware mode set\n"));
1511 #endif /* ATH6KL_DISABLE_TARGET_DBGLOGS */
1514 * Hardcode the address use for the extended board data
1515 * Ideally this should be pre-allocate by the OS at boot time
1516 * But since it is a new feature and board data is loaded
1517 * at init time, we have to workaround this from host.
1518 * It is difficult to patch the firmware boot code,
1519 * but possible in theory.
1521 if (ar->arTargetType == TARGET_TYPE_AR6003) {
1522 param = AR6003_BOARD_EXT_DATA_ADDRESS;
1523 if (BMIWriteMemory(ar->arHifDevice,
1524 HOST_INTEREST_ITEM_ADDRESS(ar, hi_board_ext_data),
1528 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BMIWriteMemory for hi_board_ext_data failed \n"));
1534 /* since BMIInit is called in the driver layer, we have to set the block
1535 * size here for the target */
1537 if (ar6000_set_htc_params(ar->arHifDevice, ar->arTargetType,
1538 mbox_yield_limit, 0)) {
1539 /* use default number of control buffers */
1543 if (setupbtdev != 0) {
1544 if (ar6000_set_hci_bridge_flags(ar->arHifDevice,
1554 init_netdev(struct net_device *dev, char *name)
1556 dev->netdev_ops = &ar6000_netdev_ops;
1557 dev->watchdog_timeo = AR6000_TX_TIMEOUT;
1558 dev->wireless_handlers = &ath_iw_handler_def;
1560 ath_iw_handler_def.get_wireless_stats = ar6000_get_iwstats; /*Displayed via proc fs */
1563 * We need the OS to provide us with more headroom in order to
1564 * perform dix to 802.3, WMI header encap, and the HTC header
1566 if (processDot11Hdr) {
1567 dev->hard_header_len = sizeof(struct ieee80211_qosframe) + sizeof(ATH_LLC_SNAP_HDR) + sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN + WMI_MAX_TX_META_SZ + LINUX_HACK_FUDGE_FACTOR;
1569 dev->hard_header_len = ETH_HLEN + sizeof(ATH_LLC_SNAP_HDR) +
1570 sizeof(WMI_DATA_HDR) + HTC_HEADER_LEN + WMI_MAX_TX_META_SZ + LINUX_HACK_FUDGE_FACTOR;
1575 strcpy(dev->name, name);
1578 #ifdef SET_MODULE_OWNER
1579 SET_MODULE_OWNER(dev);
1582 #ifdef CONFIG_CHECKSUM_OFFLOAD
1584 dev->features |= NETIF_F_IP_CSUM; /*advertise kernel capability to do TCP/UDP CSUM offload for IPV4*/
1592 * HTC Event handlers
1595 ar6000_avail_ev(void *context, void *hif_handle)
1598 struct net_device *dev;
1601 int device_index = 0;
1602 HTC_INIT_INFO htcInfo;
1603 #ifdef ATH6K_CONFIG_CFG80211
1604 struct wireless_dev *wdev;
1605 #endif /* ATH6K_CONFIG_CFG80211 */
1606 int init_status = A_OK;
1608 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_available\n"));
1610 for (i=0; i < MAX_AR6000; i++) {
1611 if (ar6000_devices[i] == NULL) {
1616 if (i == MAX_AR6000) {
1617 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_available: max devices reached\n"));
1621 /* Save this. It gives a bit better readability especially since */
1622 /* we use another local "i" variable below. */
1625 #ifdef ATH6K_CONFIG_CFG80211
1626 wdev = ar6k_cfg80211_init(NULL);
1628 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: ar6k_cfg80211_init failed\n", __func__));
1631 ar_netif = wdev_priv(wdev);
1633 dev = alloc_etherdev(sizeof(AR_SOFTC_T));
1635 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_available: can't alloc etherdev\n"));
1639 ar_netif = ar6k_priv(dev);
1640 #endif /* ATH6K_CONFIG_CFG80211 */
1642 if (ar_netif == NULL) {
1643 AR_DEBUG_PRINTF(ATH_DEBUG_ERR, ("%s: Can't allocate ar6k priv memory\n", __func__));
1647 A_MEMZERO(ar_netif, sizeof(AR_SOFTC_T));
1648 ar = (AR_SOFTC_T *)ar_netif;
1650 #ifdef ATH6K_CONFIG_CFG80211
1652 wdev->iftype = NL80211_IFTYPE_STATION;
1654 dev = alloc_netdev_mq(0, "wlan%d", ether_setup, 1);
1656 printk(KERN_CRIT "AR6K: no memory for network device instance\n");
1657 ar6k_cfg80211_deinit(ar);
1661 dev->ieee80211_ptr = wdev;
1662 SET_NETDEV_DEV(dev, wiphy_dev(wdev->wiphy));
1664 ar->arNetworkType = INFRA_NETWORK;
1665 #endif /* ATH6K_CONFIG_CFG80211 */
1667 init_netdev(dev, ifname);
1669 #ifdef SET_NETDEV_DEV
1671 HIF_DEVICE_OS_DEVICE_INFO osDevInfo;
1672 A_MEMZERO(&osDevInfo, sizeof(osDevInfo));
1673 if (!HIFConfigureDevice(hif_handle, HIF_DEVICE_GET_OS_DEVICE,
1674 &osDevInfo, sizeof(osDevInfo))) {
1675 SET_NETDEV_DEV(dev, osDevInfo.pOSDevice);
1681 ar->arHifDevice = hif_handle;
1682 ar->arWlanState = WLAN_ENABLED;
1683 ar->arDeviceIndex = device_index;
1685 ar->arWlanPowerState = WLAN_POWER_STATE_ON;
1686 ar->arWlanOff = false; /* We are in ON state */
1688 ar->arWowState = WLAN_WOW_STATE_NONE;
1689 ar->arBTOff = true; /* BT chip assumed to be OFF */
1690 ar->arBTSharing = WLAN_CONFIG_BT_SHARING;
1691 ar->arWlanOffConfig = WLAN_CONFIG_WLAN_OFF;
1692 ar->arSuspendConfig = WLAN_CONFIG_PM_SUSPEND;
1693 ar->arWow2Config = WLAN_CONFIG_PM_WOW2;
1694 #endif /* CONFIG_PM */
1696 A_INIT_TIMER(&ar->arHBChallengeResp.timer, ar6000_detect_error, dev);
1697 ar->arHBChallengeResp.seqNum = 0;
1698 ar->arHBChallengeResp.outstanding = false;
1699 ar->arHBChallengeResp.missCnt = 0;
1700 ar->arHBChallengeResp.frequency = AR6000_HB_CHALLENGE_RESP_FREQ_DEFAULT;
1701 ar->arHBChallengeResp.missThres = AR6000_HB_CHALLENGE_RESP_MISS_THRES_DEFAULT;
1703 ar6000_init_control_info(ar);
1704 init_waitqueue_head(&arEvent);
1705 sema_init(&ar->arSem, 1);
1706 ar->bIsDestroyProgress = false;
1708 INIT_HTC_PACKET_QUEUE(&ar->amsdu_rx_buffer_queue);
1710 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
1711 A_INIT_TIMER(&aptcTimer, aptcTimerHandler, ar);
1712 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
1714 A_INIT_TIMER(&ar->disconnect_timer, disconnect_timer_handler, dev);
1719 ar6000_sysfs_bmi_init(ar);
1723 struct bmi_target_info targ_info;
1725 if (BMIGetTargetInfo(ar->arHifDevice, &targ_info) != A_OK) {
1726 init_status = A_ERROR;
1727 goto avail_ev_failed;
1730 ar->arVersion.target_ver = targ_info.target_ver;
1731 ar->arTargetType = targ_info.target_type;
1733 /* do any target-specific preparation that can be done through BMI */
1734 if (ar6000_prepare_target(ar->arHifDevice,
1735 targ_info.target_type,
1736 targ_info.target_ver) != A_OK) {
1737 init_status = A_ERROR;
1738 goto avail_ev_failed;
1743 if (ar6000_configure_target(ar) != A_OK) {
1744 init_status = A_ERROR;
1745 goto avail_ev_failed;
1748 A_MEMZERO(&htcInfo,sizeof(htcInfo));
1749 htcInfo.pContext = ar;
1750 htcInfo.TargetFailure = ar6000_target_failure;
1752 ar->arHtcTarget = HTCCreate(ar->arHifDevice,&htcInfo);
1754 if (ar->arHtcTarget == NULL) {
1755 init_status = A_ERROR;
1756 goto avail_ev_failed;
1759 spin_lock_init(&ar->arLock);
1762 ar->arWapiEnable = 0;
1766 #ifdef CONFIG_CHECKSUM_OFFLOAD
1768 /*if external frame work is also needed, change and use an extended rxMetaVerion*/
1769 ar->rxMetaVersion=WMI_META_VERSION_2;
1773 #ifdef ATH_AR6K_11N_SUPPORT
1774 if((ar->aggr_cntxt = aggr_init(ar6000_alloc_netbufs)) == NULL) {
1775 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Failed to initialize aggr.\n", __func__));
1776 init_status = A_ERROR;
1777 goto avail_ev_failed;
1780 aggr_register_rx_dispatcher(ar->aggr_cntxt, (void *)dev, ar6000_deliver_frames_to_nw_stack);
1783 HIFClaimDevice(ar->arHifDevice, ar);
1785 /* We only register the device in the global list if we succeed. */
1786 /* If the device is in the global list, it will be destroyed */
1787 /* when the module is unloaded. */
1788 ar6000_devices[device_index] = dev;
1790 /* Don't install the init function if BMI is requested */
1792 ar6000_netdev_ops.ndo_init = ar6000_init;
1794 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("BMI enabled: %d\n", wlaninitmode));
1795 if ((wlaninitmode == WLAN_INIT_MODE_UDEV) ||
1796 (wlaninitmode == WLAN_INIT_MODE_DRV))
1800 if ((status = ar6000_sysfs_bmi_get_config(ar, wlaninitmode)) != A_OK)
1802 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_sysfs_bmi_get_config failed\n"));
1805 #ifdef HTC_RAW_INTERFACE
1806 break; /* Don't call ar6000_init for ART */
1809 status = (ar6000_init(dev)==0) ? A_OK : A_ERROR;
1811 if (status != A_OK) {
1812 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_init\n"));
1816 if (status != A_OK) {
1817 init_status = status;
1818 goto avail_ev_failed;
1823 /* This runs the init function if registered */
1824 if (register_netdev(dev)) {
1825 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: register_netdev failed\n"));
1826 ar6000_destroy(dev, 0);
1830 is_netdev_registered = 1;
1832 #ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT
1834 #endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
1835 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("ar6000_avail: name=%s hifdevice=0x%lx, dev=0x%lx (%d), ar=0x%lx\n",
1836 dev->name, (unsigned long)ar->arHifDevice, (unsigned long)dev, device_index,
1837 (unsigned long)ar));
1842 ar6000_sysfs_bmi_deinit(ar);
1849 static void ar6000_target_failure(void *Instance, int Status)
1851 AR_SOFTC_T *ar = (AR_SOFTC_T *)Instance;
1852 WMI_TARGET_ERROR_REPORT_EVENT errEvent;
1853 static bool sip = false;
1855 if (Status != A_OK) {
1857 printk(KERN_ERR "ar6000_target_failure: target asserted \n");
1859 if (timer_pending(&ar->arHBChallengeResp.timer)) {
1860 A_UNTIMEOUT(&ar->arHBChallengeResp.timer);
1863 /* try dumping target assertion information (if any) */
1864 ar6000_dump_target_assert_info(ar->arHifDevice,ar->arTargetType);
1867 * Fetch the logs from the target via the diagnostic
1870 ar6000_dbglog_get_debug_logs(ar);
1872 /* Report the error only once */
1875 errEvent.errorVal = WMI_TARGET_COM_ERR |
1876 WMI_TARGET_FATAL_ERR;
1877 ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
1879 sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
1885 ar6000_unavail_ev(void *context, void *hif_handle)
1887 AR_SOFTC_T *ar = (AR_SOFTC_T *)context;
1888 /* NULL out it's entry in the global list */
1889 ar6000_devices[ar->arDeviceIndex] = NULL;
1890 ar6000_destroy(ar->arNetDev, 1);
1896 ar6000_restart_endpoint(struct net_device *dev)
1899 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
1903 if ( (status=ar6000_configure_target(ar))!=A_OK)
1905 if ( (status=ar6000_sysfs_bmi_get_config(ar, wlaninitmode)) != A_OK)
1907 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_avail: ar6000_sysfs_bmi_get_config failed\n"));
1911 status = (ar6000_init(dev)==0) ? A_OK : A_ERROR;
1917 if (ar->arSsidLen && ar->arWlanState == WLAN_ENABLED) {
1918 ar6000_connect_to_ap(ar);
1926 ar6000_devices[ar->arDeviceIndex] = NULL;
1927 ar6000_destroy(ar->arNetDev, 1);
1931 ar6000_stop_endpoint(struct net_device *dev, bool keepprofile, bool getdbglogs)
1933 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
1935 /* Stop the transmit queues */
1936 netif_stop_queue(dev);
1938 /* Disable the target and the interrupts associated with it */
1939 if (ar->arWmiReady == true)
1943 if (ar->arConnected == true || ar->arConnectPending == true)
1945 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): Disconnect\n", __func__));
1947 AR6000_SPIN_LOCK(&ar->arLock, 0);
1948 ar6000_init_profile_info(ar);
1949 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
1951 wmi_disconnect_cmd(ar->arWmi);
1954 A_UNTIMEOUT(&ar->disconnect_timer);
1957 ar6000_dbglog_get_debug_logs(ar);
1960 ar->arWmiReady = false;
1961 wmi_shutdown(ar->arWmi);
1962 ar->arWmiEnabled = false;
1965 * After wmi_shudown all WMI events will be dropped.
1966 * We need to cleanup the buffers allocated in AP mode
1967 * and give disconnect notification to stack, which usually
1968 * happens in the disconnect_event.
1969 * Simulate the disconnect_event by calling the function directly.
1970 * Sometimes disconnect_event will be received when the debug logs
1973 if (ar->arConnected == true || ar->arConnectPending == true) {
1974 if(ar->arNetworkType & AP_NETWORK) {
1975 ar6000_disconnect_event(ar, DISCONNECT_CMD, bcast_mac, 0, NULL, 0);
1977 ar6000_disconnect_event(ar, DISCONNECT_CMD, ar->arBssid, 0, NULL, 0);
1979 ar->arConnected = false;
1980 ar->arConnectPending = false;
1983 ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
1984 ar->user_key_ctrl = 0;
1988 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): WMI stopped\n", __func__));
1992 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): WMI not ready 0x%lx 0x%lx\n",
1993 __func__, (unsigned long) ar, (unsigned long) ar->arWmi));
1995 /* Shut down WMI if we have started it */
1996 if(ar->arWmiEnabled == true)
1998 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s(): Shut down WMI\n", __func__));
1999 wmi_shutdown(ar->arWmi);
2000 ar->arWmiEnabled = false;
2005 if (ar->arHtcTarget != NULL) {
2006 #ifdef EXPORT_HCI_BRIDGE_INTERFACE
2007 if (NULL != ar6kHciTransCallbacks.cleanupTransport) {
2008 ar6kHciTransCallbacks.cleanupTransport(NULL);
2011 // FIXME: workaround to reset BT's UART baud rate to default
2012 if (NULL != ar->exitCallback) {
2013 AR3K_CONFIG_INFO ar3kconfig;
2016 A_MEMZERO(&ar3kconfig,sizeof(ar3kconfig));
2017 ar6000_set_default_ar3kconfig(ar, (void *)&ar3kconfig);
2018 status = ar->exitCallback(&ar3kconfig);
2019 if (A_OK != status) {
2020 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to reset AR3K baud rate! \n"));
2025 ar6000_cleanup_hci(ar);
2027 #ifdef EXPORT_HCI_PAL_INTERFACE
2028 if (setuphcipal && (NULL != ar6kHciPalCallbacks_g.cleanupTransport)) {
2029 ar6kHciPalCallbacks_g.cleanupTransport(ar);
2032 /* cleanup hci pal driver data structures */
2034 ar6k_cleanup_hci_pal(ar);
2036 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Shutting down HTC .... \n"));
2038 HTCStop(ar->arHtcTarget);
2042 /* try to reset the device if we can
2043 * The driver may have been configure NOT to reset the target during
2044 * a debug session */
2045 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Attempting to reset target on instance destroy.... \n"));
2046 if (ar->arHifDevice != NULL) {
2047 bool coldReset = (ar->arTargetType == TARGET_TYPE_AR6003) ? true: false;
2048 ar6000_reset_device(ar->arHifDevice, ar->arTargetType, true, coldReset);
2051 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Host does not want target reset. \n"));
2053 /* Done with cookies */
2054 ar6000_cookie_cleanup(ar);
2057 * We need to differentiate between the surprise and planned removal of the
2058 * device because of the following consideration:
2059 * - In case of surprise removal, the hcd already frees up the pending
2060 * for the device and hence there is no need to unregister the function
2061 * driver inorder to get these requests. For planned removal, the function
2062 * driver has to explictly unregister itself to have the hcd return all the
2063 * pending requests before the data structures for the devices are freed up.
2064 * Note that as per the current implementation, the function driver will
2065 * end up releasing all the devices since there is no API to selectively
2066 * release a particular device.
2067 * - Certain commands issued to the target can be skipped for surprise
2068 * removal since they will anyway not go through.
2071 ar6000_destroy(struct net_device *dev, unsigned int unregister)
2075 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("+ar6000_destroy \n"));
2077 if((dev == NULL) || ((ar = ar6k_priv(dev)) == NULL))
2079 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s(): Failed to get device structure.\n", __func__));
2083 ar->bIsDestroyProgress = true;
2085 if (down_interruptible(&ar->arSem)) {
2086 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s(): down_interruptible failed \n", __func__));
2090 if (ar->arWlanPowerState != WLAN_POWER_STATE_CUT_PWR) {
2091 /* only stop endpoint if we are not stop it in suspend_ev */
2092 ar6000_stop_endpoint(dev, false, true);
2094 /* clear up the platform power state before rmmod */
2095 plat_setup_power(1,0);
2098 ar->arWlanState = WLAN_DISABLED;
2099 if (ar->arHtcTarget != NULL) {
2101 HTCDestroy(ar->arHtcTarget);
2103 if (ar->arHifDevice != NULL) {
2104 /*release the device so we do not get called back on remove incase we
2105 * we're explicity destroyed by module unload */
2106 HIFReleaseDevice(ar->arHifDevice);
2107 HIFShutDownDevice(ar->arHifDevice);
2109 #ifdef ATH_AR6K_11N_SUPPORT
2110 aggr_module_destroy(ar->aggr_cntxt);
2113 /* Done with cookies */
2114 ar6000_cookie_cleanup(ar);
2116 /* cleanup any allocated AMSDU buffers */
2117 ar6000_cleanup_amsdu_rxbufs(ar);
2120 ar6000_sysfs_bmi_deinit(ar);
2126 /* Clear the tx counters */
2127 memset(tx_attempt, 0, sizeof(tx_attempt));
2128 memset(tx_post, 0, sizeof(tx_post));
2129 memset(tx_complete, 0, sizeof(tx_complete));
2131 #ifdef HTC_RAW_INTERFACE
2133 A_FREE(ar->arRawHtc);
2134 ar->arRawHtc = NULL;
2137 /* Free up the device data structure */
2138 if (unregister && is_netdev_registered) {
2139 unregister_netdev(dev);
2140 is_netdev_registered = 0;
2144 #ifdef ATH6K_CONFIG_CFG80211
2145 ar6k_cfg80211_deinit(ar);
2146 #endif /* ATH6K_CONFIG_CFG80211 */
2148 #ifdef CONFIG_AP_VIRTUL_ADAPTER_SUPPORT
2149 ar6000_remove_ap_interface();
2150 #endif /*CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
2152 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("-ar6000_destroy \n"));
2155 static void disconnect_timer_handler(unsigned long ptr)
2157 struct net_device *dev = (struct net_device *)ptr;
2158 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2160 A_UNTIMEOUT(&ar->disconnect_timer);
2162 ar6000_init_profile_info(ar);
2163 wmi_disconnect_cmd(ar->arWmi);
2166 static void ar6000_detect_error(unsigned long ptr)
2168 struct net_device *dev = (struct net_device *)ptr;
2169 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2170 WMI_TARGET_ERROR_REPORT_EVENT errEvent;
2172 AR6000_SPIN_LOCK(&ar->arLock, 0);
2174 if (ar->arHBChallengeResp.outstanding) {
2175 ar->arHBChallengeResp.missCnt++;
2177 ar->arHBChallengeResp.missCnt = 0;
2180 if (ar->arHBChallengeResp.missCnt > ar->arHBChallengeResp.missThres) {
2181 /* Send Error Detect event to the application layer and do not reschedule the error detection module timer */
2182 ar->arHBChallengeResp.missCnt = 0;
2183 ar->arHBChallengeResp.seqNum = 0;
2184 errEvent.errorVal = WMI_TARGET_COM_ERR | WMI_TARGET_FATAL_ERR;
2185 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
2186 ar6000_send_event_to_app(ar, WMI_ERROR_REPORT_EVENTID,
2188 sizeof(WMI_TARGET_ERROR_REPORT_EVENT));
2192 /* Generate the sequence number for the next challenge */
2193 ar->arHBChallengeResp.seqNum++;
2194 ar->arHBChallengeResp.outstanding = true;
2196 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
2198 /* Send the challenge on the control channel */
2199 if (wmi_get_challenge_resp_cmd(ar->arWmi, ar->arHBChallengeResp.seqNum, DRV_HB_CHALLENGE) != A_OK) {
2200 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to send heart beat challenge\n"));
2204 /* Reschedule the timer for the next challenge */
2205 A_TIMEOUT_MS(&ar->arHBChallengeResp.timer, ar->arHBChallengeResp.frequency * 1000, 0);
2208 void ar6000_init_profile_info(AR_SOFTC_T *ar)
2211 A_MEMZERO(ar->arSsid, sizeof(ar->arSsid));
2214 case HI_OPTION_FW_MODE_IBSS:
2215 ar->arNetworkType = ar->arNextMode = ADHOC_NETWORK;
2217 case HI_OPTION_FW_MODE_BSS_STA:
2218 ar->arNetworkType = ar->arNextMode = INFRA_NETWORK;
2220 case HI_OPTION_FW_MODE_AP:
2221 ar->arNetworkType = ar->arNextMode = AP_NETWORK;
2225 ar->arDot11AuthMode = OPEN_AUTH;
2226 ar->arAuthMode = NONE_AUTH;
2227 ar->arPairwiseCrypto = NONE_CRYPT;
2228 ar->arPairwiseCryptoLen = 0;
2229 ar->arGroupCrypto = NONE_CRYPT;
2230 ar->arGroupCryptoLen = 0;
2231 A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
2232 A_MEMZERO(ar->arReqBssid, sizeof(ar->arReqBssid));
2233 A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
2234 ar->arBssChannel = 0;
2235 ar->arConnected = false;
2239 ar6000_init_control_info(AR_SOFTC_T *ar)
2241 ar->arWmiEnabled = false;
2242 ar6000_init_profile_info(ar);
2243 ar->arDefTxKeyIndex = 0;
2244 A_MEMZERO(ar->arWepKeyList, sizeof(ar->arWepKeyList));
2245 ar->arChannelHint = 0;
2246 ar->arListenIntervalT = A_DEFAULT_LISTEN_INTERVAL;
2247 ar->arListenIntervalB = 0;
2248 ar->arVersion.host_ver = AR6K_SW_VERSION;
2251 ar->arTxPwrSet = false;
2253 ar->arBeaconInterval = 0;
2255 ar->arMaxRetries = 0;
2256 ar->arWmmEnabled = true;
2258 ar->scan_triggered = 0;
2259 A_MEMZERO(&ar->scParams, sizeof(ar->scParams));
2260 ar->scParams.shortScanRatio = WMI_SHORTSCANRATIO_DEFAULT;
2261 ar->scParams.scanCtrlFlags = DEFAULT_SCAN_CTRL_FLAGS;
2263 /* Initialize the AP mode state info */
2266 A_MEMZERO((u8 *)ar->sta_list, AP_MAX_NUM_STA * sizeof(sta_t));
2268 /* init the Mutexes */
2269 A_MUTEX_INIT(&ar->mcastpsqLock);
2271 /* Init the PS queues */
2272 for (ctr=0; ctr < AP_MAX_NUM_STA ; ctr++) {
2273 A_MUTEX_INIT(&ar->sta_list[ctr].psqLock);
2274 A_NETBUF_QUEUE_INIT(&ar->sta_list[ctr].psq);
2277 ar->ap_profile_flag = 0;
2278 A_NETBUF_QUEUE_INIT(&ar->mcastpsq);
2280 A_MEMCPY(ar->ap_country_code, DEF_AP_COUNTRY_CODE, 3);
2281 ar->ap_wmode = DEF_AP_WMODE_G;
2282 ar->ap_dtim_period = DEF_AP_DTIM;
2283 ar->ap_beacon_interval = DEF_BEACON_INTERVAL;
2288 ar6000_open(struct net_device *dev)
2290 unsigned long flags;
2291 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2293 spin_lock_irqsave(&ar->arLock, flags);
2295 #ifdef ATH6K_CONFIG_CFG80211
2296 if(ar->arWlanState == WLAN_DISABLED) {
2297 ar->arWlanState = WLAN_ENABLED;
2299 #endif /* ATH6K_CONFIG_CFG80211 */
2301 if( ar->arConnected || bypasswmi) {
2302 netif_carrier_on(dev);
2303 /* Wake up the queues */
2304 netif_wake_queue(dev);
2307 netif_carrier_off(dev);
2309 spin_unlock_irqrestore(&ar->arLock, flags);
2314 ar6000_close(struct net_device *dev)
2316 #ifdef ATH6K_CONFIG_CFG80211
2317 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2318 #endif /* ATH6K_CONFIG_CFG80211 */
2319 netif_stop_queue(dev);
2321 #ifdef ATH6K_CONFIG_CFG80211
2322 AR6000_SPIN_LOCK(&ar->arLock, 0);
2323 if (ar->arConnected == true || ar->arConnectPending == true) {
2324 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
2325 wmi_disconnect_cmd(ar->arWmi);
2327 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
2330 if(ar->arWmiReady == true) {
2331 if (wmi_scanparams_cmd(ar->arWmi, 0xFFFF, 0,
2332 0, 0, 0, 0, 0, 0, 0, 0) != A_OK) {
2335 ar->arWlanState = WLAN_DISABLED;
2337 #endif /* ATH6K_CONFIG_CFG80211 */
2342 /* connect to a service */
2343 static int ar6000_connectservice(AR_SOFTC_T *ar,
2344 HTC_SERVICE_CONNECT_REQ *pConnect,
2348 HTC_SERVICE_CONNECT_RESP response;
2352 A_MEMZERO(&response,sizeof(response));
2354 status = HTCConnectService(ar->arHtcTarget,
2359 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" Failed to connect to %s service status:%d \n",
2363 switch (pConnect->ServiceID) {
2364 case WMI_CONTROL_SVC :
2365 if (ar->arWmiEnabled) {
2366 /* set control endpoint for WMI use */
2367 wmi_set_control_ep(ar->arWmi, response.Endpoint);
2369 /* save EP for fast lookup */
2370 ar->arControlEp = response.Endpoint;
2372 case WMI_DATA_BE_SVC :
2373 arSetAc2EndpointIDMap(ar, WMM_AC_BE, response.Endpoint);
2375 case WMI_DATA_BK_SVC :
2376 arSetAc2EndpointIDMap(ar, WMM_AC_BK, response.Endpoint);
2378 case WMI_DATA_VI_SVC :
2379 arSetAc2EndpointIDMap(ar, WMM_AC_VI, response.Endpoint);
2381 case WMI_DATA_VO_SVC :
2382 arSetAc2EndpointIDMap(ar, WMM_AC_VO, response.Endpoint);
2385 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ServiceID not mapped %d\n", pConnect->ServiceID));
2395 void ar6000_TxDataCleanup(AR_SOFTC_T *ar)
2397 /* flush all the data (non-control) streams
2398 * we only flush packets that are tagged as data, we leave any control packets that
2399 * were in the TX queues alone */
2400 HTCFlushEndpoint(ar->arHtcTarget,
2401 arAc2EndpointID(ar, WMM_AC_BE),
2403 HTCFlushEndpoint(ar->arHtcTarget,
2404 arAc2EndpointID(ar, WMM_AC_BK),
2406 HTCFlushEndpoint(ar->arHtcTarget,
2407 arAc2EndpointID(ar, WMM_AC_VI),
2409 HTCFlushEndpoint(ar->arHtcTarget,
2410 arAc2EndpointID(ar, WMM_AC_VO),
2415 ar6000_ac2_endpoint_id ( void * devt, u8 ac)
2417 AR_SOFTC_T *ar = (AR_SOFTC_T *) devt;
2418 return(arAc2EndpointID(ar, ac));
2421 u8 ar6000_endpoint_id2_ac(void * devt, HTC_ENDPOINT_ID ep )
2423 AR_SOFTC_T *ar = (AR_SOFTC_T *) devt;
2424 return(arEndpoint2Ac(ar, ep ));
2427 /* This function does one time initialization for the lifetime of the device */
2428 int ar6000_init(struct net_device *dev)
2435 #if defined(INIT_MODE_DRV_ENABLED) && defined(ENABLE_COEXISTENCE)
2436 WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD sbcb_cmd;
2437 WMI_SET_BTCOEX_FE_ANT_CMD sbfa_cmd;
2438 #endif /* INIT_MODE_DRV_ENABLED && ENABLE_COEXISTENCE */
2440 if((ar = ar6k_priv(dev)) == NULL)
2445 if (wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) {
2447 ar6000_update_bdaddr(ar);
2449 if (enablerssicompensation) {
2450 ar6000_copy_cust_data_from_target(ar->arHifDevice, ar->arTargetType);
2451 read_rssi_compensation_param(ar);
2452 for (i=-95; i<=0; i++) {
2453 rssi_compensation_table[0-i] = rssi_compensation_calc(ar,i);
2461 /* Do we need to finish the BMI phase */
2462 if ((wlaninitmode == WLAN_INIT_MODE_USR || wlaninitmode == WLAN_INIT_MODE_DRV) &&
2463 (BMIDone(ar->arHifDevice) != A_OK))
2466 goto ar6000_init_done;
2472 if (ar->arVersion.host_ver != ar->arVersion.target_ver) {
2473 A_PRINTF("WARNING: Host version 0x%x does not match Target "
2475 ar->arVersion.host_ver, ar->arVersion.target_ver);
2479 /* Indicate that WMI is enabled (although not ready yet) */
2480 ar->arWmiEnabled = true;
2481 if ((ar->arWmi = wmi_init((void *) ar)) == NULL)
2483 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Failed to initialize WMI.\n", __func__));
2485 goto ar6000_init_done;
2488 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Got WMI @ 0x%lx.\n", __func__,
2489 (unsigned long) ar->arWmi));
2493 HTC_SERVICE_CONNECT_REQ connect;
2495 /* the reason we have to wait for the target here is that the driver layer
2496 * has to init BMI in order to set the host block size,
2498 status = HTCWaitTarget(ar->arHtcTarget);
2504 A_MEMZERO(&connect,sizeof(connect));
2505 /* meta data is unused for now */
2506 connect.pMetaData = NULL;
2507 connect.MetaDataLength = 0;
2508 /* these fields are the same for all service endpoints */
2509 connect.EpCallbacks.pContext = ar;
2510 connect.EpCallbacks.EpTxCompleteMultiple = ar6000_tx_complete;
2511 connect.EpCallbacks.EpRecv = ar6000_rx;
2512 connect.EpCallbacks.EpRecvRefill = ar6000_rx_refill;
2513 connect.EpCallbacks.EpSendFull = ar6000_tx_queue_full;
2514 /* set the max queue depth so that our ar6000_tx_queue_full handler gets called.
2515 * Linux has the peculiarity of not providing flow control between the
2516 * NIC and the network stack. There is no API to indicate that a TX packet
2517 * was sent which could provide some back pressure to the network stack.
2518 * Under linux you would have to wait till the network stack consumed all sk_buffs
2519 * before any back-flow kicked in. Which isn't very friendly.
2520 * So we have to manage this ourselves */
2521 connect.MaxSendQueueDepth = MAX_DEFAULT_SEND_QUEUE_DEPTH;
2522 connect.EpCallbacks.RecvRefillWaterMark = AR6000_MAX_RX_BUFFERS / 4; /* set to 25 % */
2523 if (0 == connect.EpCallbacks.RecvRefillWaterMark) {
2524 connect.EpCallbacks.RecvRefillWaterMark++;
2526 /* connect to control service */
2527 connect.ServiceID = WMI_CONTROL_SVC;
2528 status = ar6000_connectservice(ar,
2535 connect.LocalConnectionFlags |= HTC_LOCAL_CONN_FLAGS_ENABLE_SEND_BUNDLE_PADDING;
2536 /* limit the HTC message size on the send path, although we can receive A-MSDU frames of
2537 * 4K, we will only send ethernet-sized (802.3) frames on the send path. */
2538 connect.MaxSendMsgSize = WMI_MAX_TX_DATA_FRAME_LENGTH;
2540 /* to reduce the amount of committed memory for larger A_MSDU frames, use the recv-alloc threshold
2541 * mechanism for larger packets */
2542 connect.EpCallbacks.RecvAllocThreshold = AR6000_BUFFER_SIZE;
2543 connect.EpCallbacks.EpRecvAllocThresh = ar6000_alloc_amsdu_rxbuf;
2545 /* for the remaining data services set the connection flag to reduce dribbling,
2546 * if configured to do so */
2547 if (reduce_credit_dribble) {
2548 connect.ConnectionFlags |= HTC_CONNECT_FLAGS_REDUCE_CREDIT_DRIBBLE;
2549 /* the credit dribble trigger threshold is (reduce_credit_dribble - 1) for a value
2551 connect.ConnectionFlags &= ~HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
2552 connect.ConnectionFlags |=
2553 ((u16)reduce_credit_dribble - 1) & HTC_CONNECT_FLAGS_THRESHOLD_LEVEL_MASK;
2555 /* connect to best-effort service */
2556 connect.ServiceID = WMI_DATA_BE_SVC;
2558 status = ar6000_connectservice(ar,
2565 /* connect to back-ground
2566 * map this to WMI LOW_PRI */
2567 connect.ServiceID = WMI_DATA_BK_SVC;
2568 status = ar6000_connectservice(ar,
2575 /* connect to Video service, map this to
2577 connect.ServiceID = WMI_DATA_VI_SVC;
2578 status = ar6000_connectservice(ar,
2585 /* connect to VO service, this is currently not
2586 * mapped to a WMI priority stream due to historical reasons.
2587 * WMI originally defined 3 priorities over 3 mailboxes
2588 * We can change this when WMI is reworked so that priorities are not
2589 * dependent on mailboxes */
2590 connect.ServiceID = WMI_DATA_VO_SVC;
2591 status = ar6000_connectservice(ar,
2598 A_ASSERT(arAc2EndpointID(ar,WMM_AC_BE) != 0);
2599 A_ASSERT(arAc2EndpointID(ar,WMM_AC_BK) != 0);
2600 A_ASSERT(arAc2EndpointID(ar,WMM_AC_VI) != 0);
2601 A_ASSERT(arAc2EndpointID(ar,WMM_AC_VO) != 0);
2603 /* setup access class priority mappings */
2604 ar->arAcStreamPriMap[WMM_AC_BK] = 0; /* lowest */
2605 ar->arAcStreamPriMap[WMM_AC_BE] = 1; /* */
2606 ar->arAcStreamPriMap[WMM_AC_VI] = 2; /* */
2607 ar->arAcStreamPriMap[WMM_AC_VO] = 3; /* highest */
2609 #ifdef EXPORT_HCI_BRIDGE_INTERFACE
2610 if (setuphci && (NULL != ar6kHciTransCallbacks.setupTransport)) {
2611 HCI_TRANSPORT_MISC_HANDLES hciHandles;
2613 hciHandles.netDevice = ar->arNetDev;
2614 hciHandles.hifDevice = ar->arHifDevice;
2615 hciHandles.htcHandle = ar->arHtcTarget;
2616 status = (int)(ar6kHciTransCallbacks.setupTransport(&hciHandles));
2621 status = ar6000_setup_hci(ar);
2624 #ifdef EXPORT_HCI_PAL_INTERFACE
2625 if (setuphcipal && (NULL != ar6kHciPalCallbacks_g.setupTransport))
2626 status = ar6kHciPalCallbacks_g.setupTransport(ar);
2629 status = ar6k_setup_hci_pal(ar);
2636 goto ar6000_init_done;
2640 * give our connected endpoints some buffers
2643 ar6000_rx_refill(ar, ar->arControlEp);
2644 ar6000_rx_refill(ar, arAc2EndpointID(ar,WMM_AC_BE));
2647 * We will post the receive buffers only for SPE or endpoint ping testing so we are
2648 * making it conditional on the 'bypasswmi' flag.
2651 ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_BK));
2652 ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_VI));
2653 ar6000_rx_refill(ar,arAc2EndpointID(ar,WMM_AC_VO));
2656 /* allocate some buffers that handle larger AMSDU frames */
2657 ar6000_refill_amsdu_rxbufs(ar,AR6000_MAX_AMSDU_RX_BUFFERS);
2659 /* setup credit distribution */
2660 ar6000_setup_credit_dist(ar->arHtcTarget, &ar->arCreditStateInfo);
2662 /* Since cookies are used for HTC transports, they should be */
2663 /* initialized prior to enabling HTC. */
2664 ar6000_cookie_init(ar);
2667 status = HTCStart(ar->arHtcTarget);
2669 if (status != A_OK) {
2670 if (ar->arWmiEnabled == true) {
2671 wmi_shutdown(ar->arWmi);
2672 ar->arWmiEnabled = false;
2675 ar6000_cookie_cleanup(ar);
2677 goto ar6000_init_done;
2681 /* Wait for Wmi event to be ready */
2682 timeleft = wait_event_interruptible_timeout(arEvent,
2683 (ar->arWmiReady == true), wmitimeout * HZ);
2685 if (ar->arVersion.abi_ver != AR6K_ABI_VERSION) {
2686 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ABI Version mismatch: Host(0x%x), Target(0x%x)\n", AR6K_ABI_VERSION, ar->arVersion.abi_ver));
2687 #ifndef ATH6K_SKIP_ABI_VERSION_CHECK
2689 goto ar6000_init_done;
2690 #endif /* ATH6K_SKIP_ABI_VERSION_CHECK */
2693 if(!timeleft || signal_pending(current))
2695 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI is not ready or wait was interrupted\n"));
2697 goto ar6000_init_done;
2700 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() WMI is ready\n", __func__));
2702 /* Communicate the wmi protocol verision to the target */
2703 if ((ar6000_set_host_app_area(ar)) != A_OK) {
2704 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the host app area\n"));
2707 /* configure the device for rx dot11 header rules 0,0 are the default values
2708 * therefore this command can be skipped if the inputs are 0,false,false.Required
2709 if checksum offload is needed. Set RxMetaVersion to 2*/
2710 if ((wmi_set_rx_frame_format_cmd(ar->arWmi,ar->rxMetaVersion, processDot11Hdr, processDot11Hdr)) != A_OK) {
2711 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the rx frame format.\n"));
2714 #if defined(INIT_MODE_DRV_ENABLED) && defined(ENABLE_COEXISTENCE)
2715 /* Configure the type of BT collocated with WLAN */
2716 A_MEMZERO(&sbcb_cmd, sizeof(WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD));
2717 #ifdef CONFIG_AR600x_BT_QCOM
2718 sbcb_cmd.btcoexCoLocatedBTdev = 1;
2719 #elif defined(CONFIG_AR600x_BT_CSR)
2720 sbcb_cmd.btcoexCoLocatedBTdev = 2;
2721 #elif defined(CONFIG_AR600x_BT_AR3001)
2722 sbcb_cmd.btcoexCoLocatedBTdev = 3;
2724 #error Unsupported Bluetooth Type
2725 #endif /* Collocated Bluetooth Type */
2727 if ((wmi_set_btcoex_colocated_bt_dev_cmd(ar->arWmi, &sbcb_cmd)) != A_OK)
2729 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set collocated BT type\n"));
2732 /* Configure the type of BT collocated with WLAN */
2733 A_MEMZERO(&sbfa_cmd, sizeof(WMI_SET_BTCOEX_FE_ANT_CMD));
2734 #ifdef CONFIG_AR600x_DUAL_ANTENNA
2735 sbfa_cmd.btcoexFeAntType = 2;
2736 #elif defined(CONFIG_AR600x_SINGLE_ANTENNA)
2737 sbfa_cmd.btcoexFeAntType = 1;
2739 #error Unsupported Front-End Antenna Configuration
2740 #endif /* AR600x Front-End Antenna Configuration */
2742 if ((wmi_set_btcoex_fe_ant_cmd(ar->arWmi, &sbfa_cmd)) != A_OK) {
2743 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set fornt end antenna configuration\n"));
2745 #endif /* INIT_MODE_DRV_ENABLED && ENABLE_COEXISTENCE */
2748 ar->arNumDataEndPts = 1;
2751 /* for tests like endpoint ping, the MAC address needs to be non-zero otherwise
2752 * the data path through a raw socket is disabled */
2753 dev->dev_addr[0] = 0x00;
2754 dev->dev_addr[1] = 0x01;
2755 dev->dev_addr[2] = 0x02;
2756 dev->dev_addr[3] = 0xAA;
2757 dev->dev_addr[4] = 0xBB;
2758 dev->dev_addr[5] = 0xCC;
2770 ar6000_bitrate_rx(void *devt, s32 rateKbps)
2772 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
2774 ar->arBitRate = rateKbps;
2779 ar6000_ratemask_rx(void *devt, u32 ratemask)
2781 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
2783 ar->arRateMask = ratemask;
2788 ar6000_txPwr_rx(void *devt, u8 txPwr)
2790 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
2792 ar->arTxPwr = txPwr;
2798 ar6000_channelList_rx(void *devt, s8 numChan, u16 *chanList)
2800 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
2802 A_MEMCPY(ar->arChannelList, chanList, numChan * sizeof (u16));
2803 ar->arNumChannels = numChan;
2808 u8 ar6000_ibss_map_epid(struct sk_buff *skb, struct net_device *dev, u32 *mapNo)
2810 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2812 ATH_MAC_HDR *macHdr;
2816 datap = A_NETBUF_DATA(skb);
2817 macHdr = (ATH_MAC_HDR *)(datap + sizeof(WMI_DATA_HDR));
2818 if (IEEE80211_IS_MULTICAST(macHdr->dstMac)) {
2823 for (i = 0; i < ar->arNodeNum; i ++) {
2824 if (IEEE80211_ADDR_EQ(macHdr->dstMac, ar->arNodeMap[i].macAddress)) {
2826 ar->arNodeMap[i].txPending ++;
2827 return ar->arNodeMap[i].epId;
2830 if ((eptMap == -1) && !ar->arNodeMap[i].txPending) {
2836 eptMap = ar->arNodeNum;
2838 A_ASSERT(ar->arNodeNum <= MAX_NODE_NUM);
2841 A_MEMCPY(ar->arNodeMap[eptMap].macAddress, macHdr->dstMac, IEEE80211_ADDR_LEN);
2843 for (i = ENDPOINT_2; i <= ENDPOINT_5; i ++) {
2844 if (!ar->arTxPending[i]) {
2845 ar->arNodeMap[eptMap].epId = i;
2848 // No free endpoint is available, start redistribution on the inuse endpoints.
2849 if (i == ENDPOINT_5) {
2850 ar->arNodeMap[eptMap].epId = ar->arNexEpId;
2852 if (ar->arNexEpId > ENDPOINT_5) {
2853 ar->arNexEpId = ENDPOINT_2;
2858 (*mapNo) = eptMap + 1;
2859 ar->arNodeMap[eptMap].txPending ++;
2861 return ar->arNodeMap[eptMap].epId;
2865 static void ar6000_dump_skb(struct sk_buff *skb)
2868 for (ch = A_NETBUF_DATA(skb);
2869 (unsigned long)ch < ((unsigned long)A_NETBUF_DATA(skb) +
2870 A_NETBUF_LEN(skb)); ch++)
2872 AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("%2.2x ", *ch));
2874 AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("\n"));
2878 #ifdef HTC_TEST_SEND_PKTS
2879 static void DoHTCSendPktsTest(AR_SOFTC_T *ar, int MapNo, HTC_ENDPOINT_ID eid, struct sk_buff *skb);
2883 ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
2885 #define AC_NOT_MAPPED 99
2886 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
2887 u8 ac = AC_NOT_MAPPED;
2888 HTC_ENDPOINT_ID eid = ENDPOINT_UNUSED;
2891 struct ar_cookie *cookie;
2892 bool checkAdHocPsMapping = false,bMoreData = false;
2893 HTC_TX_TAG htc_tag = AR6K_DATA_PKT_TAG;
2894 u8 dot11Hdr = processDot11Hdr;
2896 if (ar->arWowState != WLAN_WOW_STATE_NONE) {
2900 #endif /* CONFIG_PM */
2902 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar6000_data_tx start - skb=0x%lx, data=0x%lx, len=0x%x\n",
2903 (unsigned long)skb, (unsigned long)A_NETBUF_DATA(skb),
2904 A_NETBUF_LEN(skb)));
2906 /* If target is not associated */
2907 if( (!ar->arConnected && !bypasswmi)
2908 #ifdef CONFIG_HOST_TCMD_SUPPORT
2909 /* TCMD doesnt support any data, free the buf and return */
2910 || (ar->arTargetMode == AR6000_TCMD_MODE)
2919 if (ar->arWmiReady == false && bypasswmi == 0) {
2923 #ifdef BLOCK_TX_PATH_FLAG
2927 #endif /* BLOCK_TX_PATH_FLAG */
2929 /* AP mode Power save processing */
2930 /* If the dst STA is in sleep state, queue the pkt in its PS queue */
2932 if (ar->arNetworkType == AP_NETWORK) {
2933 ATH_MAC_HDR *datap = (ATH_MAC_HDR *)A_NETBUF_DATA(skb);
2936 /* If the dstMac is a Multicast address & atleast one of the
2937 * associated STA is in PS mode, then queue the pkt to the
2940 if (IEEE80211_IS_MULTICAST(datap->dstMac)) {
2945 for (ctr=0; ctr<AP_MAX_NUM_STA; ctr++) {
2946 if (STA_IS_PWR_SLEEP((&ar->sta_list[ctr]))) {
2952 /* If this transmit is not because of a Dtim Expiry q it */
2953 if (ar->DTIMExpired == false) {
2954 bool isMcastqEmpty = false;
2956 A_MUTEX_LOCK(&ar->mcastpsqLock);
2957 isMcastqEmpty = A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq);
2958 A_NETBUF_ENQUEUE(&ar->mcastpsq, skb);
2959 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
2961 /* If this is the first Mcast pkt getting queued
2962 * indicate to the target to set the BitmapControl LSB
2965 if (isMcastqEmpty) {
2966 wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 1);
2970 /* This transmit is because of Dtim expiry. Determine if
2971 * MoreData bit has to be set.
2973 A_MUTEX_LOCK(&ar->mcastpsqLock);
2974 if(!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) {
2977 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
2981 conn = ieee80211_find_conn(ar, datap->dstMac);
2983 if (STA_IS_PWR_SLEEP(conn)) {
2984 /* If this transmit is not because of a PsPoll q it*/
2985 if (!STA_IS_PS_POLLED(conn)) {
2986 bool isPsqEmpty = false;
2987 /* Queue the frames if the STA is sleeping */
2988 A_MUTEX_LOCK(&conn->psqLock);
2989 isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq);
2990 A_NETBUF_ENQUEUE(&conn->psq, skb);
2991 A_MUTEX_UNLOCK(&conn->psqLock);
2993 /* If this is the first pkt getting queued
2994 * for this STA, update the PVB for this STA
2997 wmi_set_pvb_cmd(ar->arWmi, conn->aid, 1);
3002 /* This tx is because of a PsPoll. Determine if
3003 * MoreData bit has to be set
3005 A_MUTEX_LOCK(&conn->psqLock);
3006 if (!A_NETBUF_QUEUE_EMPTY(&conn->psq)) {
3009 A_MUTEX_UNLOCK(&conn->psqLock);
3014 /* non existent STA. drop the frame */
3021 if (ar->arWmiEnabled) {
3022 #ifdef CONFIG_CHECKSUM_OFFLOAD
3025 u8 csum=skb->ip_summed;
3026 if(csumOffload && (csum==CHECKSUM_PARTIAL)){
3027 csumStart = (skb->head + skb->csum_start - skb_network_header(skb) +
3028 sizeof(ATH_LLC_SNAP_HDR));
3029 csumDest=skb->csum_offset+csumStart;
3032 if (A_NETBUF_HEADROOM(skb) < dev->hard_header_len - LINUX_HACK_FUDGE_FACTOR) {
3033 struct sk_buff *newbuf;
3036 * We really should have gotten enough headroom but sometimes
3037 * we still get packets with not enough headroom. Copy the packet.
3039 len = A_NETBUF_LEN(skb);
3040 newbuf = A_NETBUF_ALLOC(len);
3041 if (newbuf == NULL) {
3044 A_NETBUF_PUT(newbuf, len);
3045 A_MEMCPY(A_NETBUF_DATA(newbuf), A_NETBUF_DATA(skb), len);
3048 /* fall through and assemble header */
3052 if (wmi_dot11_hdr_add(ar->arWmi,skb,ar->arNetworkType) != A_OK) {
3053 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx-wmi_dot11_hdr_add failed\n"));
3057 if (wmi_dix_2_dot3(ar->arWmi, skb) != A_OK) {
3058 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_dix_2_dot3 failed\n"));
3062 #ifdef CONFIG_CHECKSUM_OFFLOAD
3063 if(csumOffload && (csum ==CHECKSUM_PARTIAL)){
3064 WMI_TX_META_V2 metaV2;
3065 metaV2.csumStart =csumStart;
3066 metaV2.csumDest = csumDest;
3067 metaV2.csumFlags = 0x1;/*instruct target to calculate checksum*/
3068 if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE, bMoreData, dot11Hdr,
3069 WMI_META_VERSION_2,&metaV2) != A_OK) {
3070 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_data_hdr_add failed\n"));
3078 if (wmi_data_hdr_add(ar->arWmi, skb, DATA_MSGTYPE, bMoreData, dot11Hdr,0,NULL) != A_OK) {
3079 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_data_tx - wmi_data_hdr_add failed\n"));
3085 if ((ar->arNetworkType == ADHOC_NETWORK) &&
3086 ar->arIbssPsEnable && ar->arConnected) {
3087 /* flag to check adhoc mapping once we take the lock below: */
3088 checkAdHocPsMapping = true;
3091 /* get the stream mapping */
3092 ac = wmi_implicit_create_pstream(ar->arWmi, skb, 0, ar->arWmmEnabled);
3096 EPPING_HEADER *eppingHdr;
3098 eppingHdr = A_NETBUF_DATA(skb);
3100 if (IS_EPPING_PACKET(eppingHdr)) {
3101 /* the stream ID is mapped to an access class */
3102 ac = eppingHdr->StreamNo_h;
3103 /* some EPPING packets cannot be dropped no matter what access class it was
3104 * sent on. We can change the packet tag to guarantee it will not get dropped */
3105 if (IS_EPING_PACKET_NO_DROP(eppingHdr)) {
3106 htc_tag = AR6K_CONTROL_PKT_TAG;
3109 if (ac == HCI_TRANSPORT_STREAM_NUM) {
3110 /* pass this to HCI */
3111 #ifndef EXPORT_HCI_BRIDGE_INTERFACE
3112 if (!hci_test_send(ar,skb)) {
3116 /* set AC to discard this skb */
3119 /* a quirk of linux, the payload of the frame is 32-bit aligned and thus the addition
3120 * of the HTC header will mis-align the start of the HTC frame, so we add some
3121 * padding which will be stripped off in the target */
3122 if (EPPING_ALIGNMENT_PAD > 0) {
3123 A_NETBUF_PUSH(skb, EPPING_ALIGNMENT_PAD);
3128 /* not a ping packet, drop it */
3135 /* did we succeed ? */
3136 if ((ac == AC_NOT_MAPPED) && !checkAdHocPsMapping) {
3137 /* cleanup and exit */
3139 AR6000_STAT_INC(ar, tx_dropped);
3140 AR6000_STAT_INC(ar, tx_aborted_errors);
3146 /* take the lock to protect driver data */
3147 AR6000_SPIN_LOCK(&ar->arLock, 0);
3151 if (checkAdHocPsMapping) {
3152 eid = ar6000_ibss_map_epid(skb, dev, &mapNo);
3154 eid = arAc2EndpointID (ar, ac);
3156 /* validate that the endpoint is connected */
3157 if (eid == 0 || eid == ENDPOINT_UNUSED ) {
3158 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" eid %d is NOT mapped!\n", eid));
3161 /* allocate resource for this packet */
3162 cookie = ar6000_alloc_cookie(ar);
3164 if (cookie != NULL) {
3165 /* update counts while the lock is held */
3166 ar->arTxPending[eid]++;
3167 ar->arTotalTxDataPending++;
3172 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3174 if (cookie != NULL) {
3175 cookie->arc_bp[0] = (unsigned long)skb;
3176 cookie->arc_bp[1] = mapNo;
3177 SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
3185 if (debugdriver >= 3) {
3186 ar6000_dump_skb(skb);
3189 #ifdef HTC_TEST_SEND_PKTS
3190 DoHTCSendPktsTest(ar,mapNo,eid,skb);
3192 /* HTC interface is asynchronous, if this fails, cleanup will happen in
3193 * the ar6000_tx_complete callback */
3194 HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
3196 /* no packet to send, cleanup */
3198 AR6000_STAT_INC(ar, tx_dropped);
3199 AR6000_STAT_INC(ar, tx_aborted_errors);
3206 ar6000_acl_data_tx(struct sk_buff *skb, struct net_device *dev)
3208 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
3209 struct ar_cookie *cookie;
3210 HTC_ENDPOINT_ID eid = ENDPOINT_UNUSED;
3213 AR6000_SPIN_LOCK(&ar->arLock, 0);
3215 /* For now we send ACL on BE endpoint: We can also have a dedicated EP */
3216 eid = arAc2EndpointID (ar, 0);
3217 /* allocate resource for this packet */
3218 cookie = ar6000_alloc_cookie(ar);
3220 if (cookie != NULL) {
3221 /* update counts while the lock is held */
3222 ar->arTxPending[eid]++;
3223 ar->arTotalTxDataPending++;
3227 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3229 if (cookie != NULL) {
3230 cookie->arc_bp[0] = (unsigned long)skb;
3231 cookie->arc_bp[1] = 0;
3232 SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
3239 /* HTC interface is asynchronous, if this fails, cleanup will happen in
3240 * the ar6000_tx_complete callback */
3241 HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
3243 /* no packet to send, cleanup */
3245 AR6000_STAT_INC(ar, tx_dropped);
3246 AR6000_STAT_INC(ar, tx_aborted_errors);
3252 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
3254 tvsub(register struct timeval *out, register struct timeval *in)
3256 if((out->tv_usec -= in->tv_usec) < 0) {
3258 out->tv_usec += 1000000;
3260 out->tv_sec -= in->tv_sec;
3264 applyAPTCHeuristics(AR_SOFTC_T *ar)
3272 AR6000_SPIN_LOCK(&ar->arLock, 0);
3274 if ((enableAPTCHeuristics) && (!aptcTR.timerScheduled)) {
3275 do_gettimeofday(&ts);
3276 tvsub(&ts, &aptcTR.samplingTS);
3277 duration = ts.tv_sec * 1000 + ts.tv_usec / 1000; /* ms */
3278 numbytes = aptcTR.bytesTransmitted + aptcTR.bytesReceived;
3280 if (duration > APTC_TRAFFIC_SAMPLING_INTERVAL) {
3281 /* Initialize the time stamp and byte count */
3282 aptcTR.bytesTransmitted = aptcTR.bytesReceived = 0;
3283 do_gettimeofday(&aptcTR.samplingTS);
3285 /* Calculate and decide based on throughput thresholds */
3286 throughput = ((numbytes * 8) / duration);
3287 if (throughput > APTC_UPPER_THROUGHPUT_THRESHOLD) {
3288 /* Disable Sleep and schedule a timer */
3289 A_ASSERT(ar->arWmiReady == true);
3290 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3291 status = wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
3292 AR6000_SPIN_LOCK(&ar->arLock, 0);
3293 A_TIMEOUT_MS(&aptcTimer, APTC_TRAFFIC_SAMPLING_INTERVAL, 0);
3294 aptcTR.timerScheduled = true;
3299 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3301 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
3303 static HTC_SEND_FULL_ACTION ar6000_tx_queue_full(void *Context, HTC_PACKET *pPacket)
3305 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
3306 HTC_SEND_FULL_ACTION action = HTC_SEND_FULL_KEEP;
3307 bool stopNet = false;
3308 HTC_ENDPOINT_ID Endpoint = HTC_GET_ENDPOINT_FROM_PKT(pPacket);
3315 if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_CONTROL_PKT_TAG) {
3316 /* don't drop special control packets */
3320 accessClass = arEndpoint2Ac(ar,Endpoint);
3321 /* for endpoint ping testing drop Best Effort and Background */
3322 if ((accessClass == WMM_AC_BE) || (accessClass == WMM_AC_BK)) {
3323 action = HTC_SEND_FULL_DROP;
3326 /* keep but stop the netqueues */
3332 if (Endpoint == ar->arControlEp) {
3333 /* under normal WMI if this is getting full, then something is running rampant
3334 * the host should not be exhausting the WMI queue with too many commands
3335 * the only exception to this is during testing using endpointping */
3336 AR6000_SPIN_LOCK(&ar->arLock, 0);
3337 /* set flag to handle subsequent messages */
3338 ar->arWMIControlEpFull = true;
3339 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3340 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI Control Endpoint is FULL!!! \n"));
3341 /* no need to stop the network */
3346 /* if we get here, we are dealing with data endpoints getting full */
3348 if (HTC_GET_TAG_FROM_PKT(pPacket) == AR6K_CONTROL_PKT_TAG) {
3349 /* don't drop control packets issued on ANY data endpoint */
3353 if (ar->arNetworkType == ADHOC_NETWORK) {
3354 /* in adhoc mode, we cannot differentiate traffic priorities so there is no need to
3355 * continue, however we should stop the network */
3359 /* the last MAX_HI_COOKIE_NUM "batch" of cookies are reserved for the highest
3361 if (ar->arAcStreamPriMap[arEndpoint2Ac(ar,Endpoint)] < ar->arHiAcStreamActivePri &&
3362 ar->arCookieCount <= MAX_HI_COOKIE_NUM) {
3363 /* this stream's priority is less than the highest active priority, we
3364 * give preference to the highest priority stream by directing
3365 * HTC to drop the packet that overflowed */
3366 action = HTC_SEND_FULL_DROP;
3367 /* since we are dropping packets, no need to stop the network */
3375 AR6000_SPIN_LOCK(&ar->arLock, 0);
3376 ar->arNetQueueStopped = true;
3377 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3378 /* one of the data endpoints queues is getting full..need to stop network stack
3379 * the queue will resume in ar6000_tx_complete() */
3380 netif_stop_queue(ar->arNetDev);
3388 ar6000_tx_complete(void *Context, HTC_PACKET_QUEUE *pPacketQueue)
3390 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
3393 struct ar_cookie * ar_cookie;
3394 HTC_ENDPOINT_ID eid;
3395 bool wakeEvent = false;
3396 struct sk_buff_head skb_queue;
3397 HTC_PACKET *pPacket;
3398 struct sk_buff *pktSkb;
3399 bool flushing = false;
3401 skb_queue_head_init(&skb_queue);
3403 /* lock the driver as we update internal state */
3404 AR6000_SPIN_LOCK(&ar->arLock, 0);
3406 /* reap completed packets */
3407 while (!HTC_QUEUE_EMPTY(pPacketQueue)) {
3409 pPacket = HTC_PACKET_DEQUEUE(pPacketQueue);
3411 ar_cookie = (struct ar_cookie *)pPacket->pPktContext;
3412 A_ASSERT(ar_cookie);
3414 status = pPacket->Status;
3415 pktSkb = (struct sk_buff *)ar_cookie->arc_bp[0];
3416 eid = pPacket->Endpoint;
3417 mapNo = ar_cookie->arc_bp[1];
3420 A_ASSERT(pPacket->pBuffer == A_NETBUF_DATA(pktSkb));
3422 /* add this to the list, use faster non-lock API */
3423 __skb_queue_tail(&skb_queue,pktSkb);
3426 A_ASSERT(pPacket->ActualLength == A_NETBUF_LEN(pktSkb));
3429 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar6000_tx_complete skb=0x%lx data=0x%lx len=0x%x eid=%d ",
3430 (unsigned long)pktSkb, (unsigned long)pPacket->pBuffer,
3431 pPacket->ActualLength,
3434 ar->arTxPending[eid]--;
3436 if ((eid != ar->arControlEp) || bypasswmi) {
3437 ar->arTotalTxDataPending--;
3440 if (eid == ar->arControlEp)
3442 if (ar->arWMIControlEpFull) {
3443 /* since this packet completed, the WMI EP is no longer full */
3444 ar->arWMIControlEpFull = false;
3447 if (ar->arTxPending[eid] == 0) {
3453 if (status == A_ECANCELED) {
3454 /* a packet was flushed */
3457 AR6000_STAT_INC(ar, tx_errors);
3458 if (status != A_NO_RESOURCE) {
3459 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() -TX ERROR, status: 0x%x\n", __func__,
3463 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("OK\n"));
3465 AR6000_STAT_INC(ar, tx_packets);
3466 ar->arNetStats.tx_bytes += A_NETBUF_LEN(pktSkb);
3467 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
3468 aptcTR.bytesTransmitted += a_netbuf_to_len(pktSkb);
3469 applyAPTCHeuristics(ar);
3470 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
3473 // TODO this needs to be looked at
3474 if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable
3475 && (eid != ar->arControlEp) && mapNo)
3478 ar->arNodeMap[mapNo].txPending --;
3480 if (!ar->arNodeMap[mapNo].txPending && (mapNo == (ar->arNodeNum - 1))) {
3482 for (i = ar->arNodeNum; i > 0; i --) {
3483 if (!ar->arNodeMap[i - 1].txPending) {
3484 A_MEMZERO(&ar->arNodeMap[i - 1], sizeof(struct ar_node_mapping));
3493 ar6000_free_cookie(ar, ar_cookie);
3495 if (ar->arNetQueueStopped) {
3496 ar->arNetQueueStopped = false;
3500 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3502 /* lock is released, we can freely call other kernel APIs */
3504 /* free all skbs in our local list */
3505 while (!skb_queue_empty(&skb_queue)) {
3506 /* use non-lock version */
3507 pktSkb = __skb_dequeue(&skb_queue);
3508 A_NETBUF_FREE(pktSkb);
3511 if ((ar->arConnected == true) || bypasswmi) {
3513 /* don't wake the queue if we are flushing, other wise it will just
3514 * keep queueing packets, which will keep failing */
3515 netif_wake_queue(ar->arNetDev);
3526 ieee80211_find_conn(AR_SOFTC_T *ar, u8 *node_addr)
3531 switch(ar->arNetworkType) {
3533 max_conn = AP_MAX_NUM_STA;
3540 for (i = 0; i < max_conn; i++) {
3541 if (IEEE80211_ADDR_EQ(node_addr, ar->sta_list[i].mac)) {
3542 conn = &ar->sta_list[i];
3550 sta_t *ieee80211_find_conn_for_aid(AR_SOFTC_T *ar, u8 aid)
3555 for (ctr = 0; ctr < AP_MAX_NUM_STA; ctr++) {
3556 if (ar->sta_list[ctr].aid == aid) {
3557 conn = &ar->sta_list[ctr];
3565 * Receive event handler. This is called by HTC when a packet is received
3569 ar6000_rx(void *Context, HTC_PACKET *pPacket)
3571 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
3572 struct sk_buff *skb = (struct sk_buff *)pPacket->pPktContext;
3574 u8 containsDot11Hdr = 0;
3575 int status = pPacket->Status;
3576 HTC_ENDPOINT_ID ept = pPacket->Endpoint;
3578 A_ASSERT((status != A_OK) ||
3579 (pPacket->pBuffer == (A_NETBUF_DATA(skb) + HTC_HEADER_LEN)));
3581 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx ar=0x%lx eid=%d, skb=0x%lx, data=0x%lx, len=0x%x status:%d",
3582 (unsigned long)ar, ept, (unsigned long)skb, (unsigned long)pPacket->pBuffer,
3583 pPacket->ActualLength, status));
3584 if (status != A_OK) {
3585 if (status != A_ECANCELED) {
3586 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("RX ERR (%d) \n",status));
3590 /* take lock to protect buffer counts
3591 * and adaptive power throughput state */
3592 AR6000_SPIN_LOCK(&ar->arLock, 0);
3595 AR6000_STAT_INC(ar, rx_packets);
3596 ar->arNetStats.rx_bytes += pPacket->ActualLength;
3597 #ifdef ADAPTIVE_POWER_THROUGHPUT_CONTROL
3598 aptcTR.bytesReceived += a_netbuf_to_len(skb);
3599 applyAPTCHeuristics(ar);
3600 #endif /* ADAPTIVE_POWER_THROUGHPUT_CONTROL */
3602 A_NETBUF_PUT(skb, pPacket->ActualLength + HTC_HEADER_LEN);
3603 A_NETBUF_PULL(skb, HTC_HEADER_LEN);
3606 if (debugdriver >= 2) {
3607 ar6000_dump_skb(skb);
3612 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3614 skb->dev = ar->arNetDev;
3615 if (status != A_OK) {
3616 AR6000_STAT_INC(ar, rx_errors);
3618 } else if (ar->arWmiEnabled == true) {
3619 if (ept == ar->arControlEp) {
3621 * this is a wmi control msg
3624 ar6000_check_wow_status(ar, skb, true);
3625 #endif /* CONFIG_PM */
3626 wmi_control_rx(ar->arWmi, skb);
3628 WMI_DATA_HDR *dhdr = (WMI_DATA_HDR *)A_NETBUF_DATA(skb);
3631 bool is_acl_data_frame;
3632 is_acl_data_frame = WMI_DATA_HDR_GET_DATA_TYPE(dhdr) == WMI_DATA_HDR_DATA_TYPE_ACL;
3634 ar6000_check_wow_status(ar, NULL, false);
3635 #endif /* CONFIG_PM */
3637 * this is a wmi data packet
3641 if (processDot11Hdr) {
3642 minHdrLen = sizeof(WMI_DATA_HDR) + sizeof(struct ieee80211_frame) + sizeof(ATH_LLC_SNAP_HDR);
3644 minHdrLen = sizeof (WMI_DATA_HDR) + sizeof(ATH_MAC_HDR) +
3645 sizeof(ATH_LLC_SNAP_HDR);
3648 /* In the case of AP mode we may receive NULL data frames
3649 * that do not have LLC hdr. They are 16 bytes in size.
3650 * Allow these frames in the AP mode.
3651 * ACL data frames don't follow ethernet frame bounds for
3654 if (ar->arNetworkType != AP_NETWORK && !is_acl_data_frame &&
3655 ((pPacket->ActualLength < minHdrLen) ||
3656 (pPacket->ActualLength > AR6000_MAX_RX_MESSAGE_SIZE)))
3659 * packet is too short or too long
3661 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("TOO SHORT or TOO LONG\n"));
3662 AR6000_STAT_INC(ar, rx_errors);
3663 AR6000_STAT_INC(ar, rx_length_errors);
3670 /* Access RSSI values here */
3671 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("RSSI %d\n",
3672 ((WMI_DATA_HDR *) A_NETBUF_DATA(skb))->rssi));
3674 /* Get the Power save state of the STA */
3675 if (ar->arNetworkType == AP_NETWORK) {
3677 u8 psState=0,prevPsState;
3678 ATH_MAC_HDR *datap=NULL;
3681 meta_type = WMI_DATA_HDR_GET_META(dhdr);
3683 psState = (((WMI_DATA_HDR *)A_NETBUF_DATA(skb))->info
3684 >> WMI_DATA_HDR_PS_SHIFT) & WMI_DATA_HDR_PS_MASK;
3686 offset = sizeof(WMI_DATA_HDR);
3688 switch (meta_type) {
3691 case WMI_META_VERSION_1:
3692 offset += sizeof(WMI_RX_META_V1);
3694 #ifdef CONFIG_CHECKSUM_OFFLOAD
3695 case WMI_META_VERSION_2:
3696 offset += sizeof(WMI_RX_META_V2);
3703 datap = (ATH_MAC_HDR *)(A_NETBUF_DATA(skb)+offset);
3704 conn = ieee80211_find_conn(ar, datap->srcMac);
3707 /* if there is a change in PS state of the STA,
3708 * take appropriate steps.
3709 * 1. If Sleep-->Awake, flush the psq for the STA
3710 * Clear the PVB for the STA.
3711 * 2. If Awake-->Sleep, Starting queueing frames
3714 prevPsState = STA_IS_PWR_SLEEP(conn);
3716 STA_SET_PWR_SLEEP(conn);
3718 STA_CLR_PWR_SLEEP(conn);
3721 if (prevPsState ^ STA_IS_PWR_SLEEP(conn)) {
3723 if (!STA_IS_PWR_SLEEP(conn)) {
3725 A_MUTEX_LOCK(&conn->psqLock);
3726 while (!A_NETBUF_QUEUE_EMPTY(&conn->psq)) {
3727 struct sk_buff *skb=NULL;
3729 skb = A_NETBUF_DEQUEUE(&conn->psq);
3730 A_MUTEX_UNLOCK(&conn->psqLock);
3731 ar6000_data_tx(skb,ar->arNetDev);
3732 A_MUTEX_LOCK(&conn->psqLock);
3734 A_MUTEX_UNLOCK(&conn->psqLock);
3735 /* Clear the PVB for this STA */
3736 wmi_set_pvb_cmd(ar->arWmi, conn->aid, 0);
3740 /* This frame is from a STA that is not associated*/
3744 /* Drop NULL data frames here */
3745 if((pPacket->ActualLength < minHdrLen) ||
3746 (pPacket->ActualLength > AR6000_MAX_RX_MESSAGE_SIZE)) {
3752 is_amsdu = WMI_DATA_HDR_IS_AMSDU(dhdr) ? true : false;
3753 tid = WMI_DATA_HDR_GET_UP(dhdr);
3754 seq_no = WMI_DATA_HDR_GET_SEQNO(dhdr);
3755 meta_type = WMI_DATA_HDR_GET_META(dhdr);
3756 containsDot11Hdr = WMI_DATA_HDR_GET_DOT11(dhdr);
3758 wmi_data_hdr_remove(ar->arWmi, skb);
3760 switch (meta_type) {
3761 case WMI_META_VERSION_1:
3763 WMI_RX_META_V1 *pMeta = (WMI_RX_META_V1 *)A_NETBUF_DATA(skb);
3764 A_PRINTF("META %d %d %d %d %x\n", pMeta->status, pMeta->rix, pMeta->rssi, pMeta->channel, pMeta->flags);
3765 A_NETBUF_PULL((void*)skb, sizeof(WMI_RX_META_V1));
3768 #ifdef CONFIG_CHECKSUM_OFFLOAD
3769 case WMI_META_VERSION_2:
3771 WMI_RX_META_V2 *pMeta = (WMI_RX_META_V2 *)A_NETBUF_DATA(skb);
3772 if(pMeta->csumFlags & 0x1){
3773 skb->ip_summed=CHECKSUM_COMPLETE;
3774 skb->csum=(pMeta->csum);
3776 A_NETBUF_PULL((void*)skb, sizeof(WMI_RX_META_V2));
3784 A_ASSERT(status == A_OK);
3786 /* NWF: print the 802.11 hdr bytes */
3787 if(containsDot11Hdr) {
3788 status = wmi_dot11_hdr_remove(ar->arWmi,skb);
3789 } else if(!is_amsdu && !is_acl_data_frame) {
3790 status = wmi_dot3_2_dix(skb);
3793 if (status != A_OK) {
3794 /* Drop frames that could not be processed (lack of memory, etc.) */
3799 if (is_acl_data_frame) {
3800 A_NETBUF_PUSH(skb, sizeof(int));
3801 *((short *)A_NETBUF_DATA(skb)) = WMI_ACL_DATA_EVENTID;
3802 /* send the data packet to PAL driver */
3803 if(ar6k_pal_config_g.fpar6k_pal_recv_pkt) {
3804 if((*ar6k_pal_config_g.fpar6k_pal_recv_pkt)(ar->hcipal_info, skb) == true)
3809 if ((ar->arNetDev->flags & IFF_UP) == IFF_UP) {
3810 if (ar->arNetworkType == AP_NETWORK) {
3811 struct sk_buff *skb1 = NULL;
3814 datap = (ATH_MAC_HDR *)A_NETBUF_DATA(skb);
3815 if (IEEE80211_IS_MULTICAST(datap->dstMac)) {
3816 /* Bcast/Mcast frames should be sent to the OS
3817 * stack as well as on the air.
3819 skb1 = skb_copy(skb,GFP_ATOMIC);
3821 /* Search for a connected STA with dstMac as
3822 * the Mac address. If found send the frame to
3823 * it on the air else send the frame up the
3827 conn = ieee80211_find_conn(ar, datap->dstMac);
3829 if (conn && ar->intra_bss) {
3832 } else if(conn && !ar->intra_bss) {
3838 ar6000_data_tx(skb1, ar->arNetDev);
3842 #ifdef ATH_AR6K_11N_SUPPORT
3843 aggr_process_recv_frm(ar->aggr_cntxt, tid, seq_no, is_amsdu, (void **)&skb);
3845 ar6000_deliver_frames_to_nw_stack((void *) ar->arNetDev, (void *)skb);
3849 if (EPPING_ALIGNMENT_PAD > 0) {
3850 A_NETBUF_PULL(skb, EPPING_ALIGNMENT_PAD);
3852 ar6000_deliver_frames_to_nw_stack((void *)ar->arNetDev, (void *)skb);
3861 ar6000_deliver_frames_to_nw_stack(void *dev, void *osbuf)
3863 struct sk_buff *skb = (struct sk_buff *)osbuf;
3867 if ((skb->dev->flags & IFF_UP) == IFF_UP) {
3869 ar6000_check_wow_status((AR_SOFTC_T *)ar6k_priv(dev), skb, false);
3870 #endif /* CONFIG_PM */
3871 skb->protocol = eth_type_trans(skb, skb->dev);
3873 * If this routine is called on a ISR (Hard IRQ) or DSR (Soft IRQ)
3874 * or tasklet use the netif_rx to deliver the packet to the stack
3875 * netif_rx will queue the packet onto the receive queue and mark
3876 * the softirq thread has a pending action to complete. Kernel will
3877 * schedule the softIrq kernel thread after processing the DSR.
3879 * If this routine is called on a process context, use netif_rx_ni
3880 * which will schedle the softIrq kernel thread after queuing the packet.
3882 if (in_interrupt()) {
3895 ar6000_deliver_frames_to_bt_stack(void *dev, void *osbuf)
3897 struct sk_buff *skb = (struct sk_buff *)osbuf;
3901 if ((skb->dev->flags & IFF_UP) == IFF_UP) {
3902 skb->protocol = htons(ETH_P_CONTROL);
3912 ar6000_rx_refill(void *Context, HTC_ENDPOINT_ID Endpoint)
3914 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
3917 int buffersToRefill;
3918 HTC_PACKET *pPacket;
3919 HTC_PACKET_QUEUE queue;
3921 buffersToRefill = (int)AR6000_MAX_RX_BUFFERS -
3922 HTCGetNumRecvBuffers(ar->arHtcTarget, Endpoint);
3924 if (buffersToRefill <= 0) {
3925 /* fast return, nothing to fill */
3929 INIT_HTC_PACKET_QUEUE(&queue);
3931 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_rx_refill: providing htc with %d buffers at eid=%d\n",
3932 buffersToRefill, Endpoint));
3934 for (RxBuffers = 0; RxBuffers < buffersToRefill; RxBuffers++) {
3935 osBuf = A_NETBUF_ALLOC(AR6000_BUFFER_SIZE);
3936 if (NULL == osBuf) {
3939 /* the HTC packet wrapper is at the head of the reserved area
3941 pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
3942 /* set re-fill info */
3943 SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_BUFFER_SIZE,Endpoint);
3945 HTC_PACKET_ENQUEUE(&queue,pPacket);
3948 if (!HTC_QUEUE_EMPTY(&queue)) {
3950 HTCAddReceivePktMultiple(ar->arHtcTarget, &queue);
3955 /* clean up our amsdu buffer list */
3956 static void ar6000_cleanup_amsdu_rxbufs(AR_SOFTC_T *ar)
3958 HTC_PACKET *pPacket;
3961 /* empty AMSDU buffer queue and free OS bufs */
3964 AR6000_SPIN_LOCK(&ar->arLock, 0);
3965 pPacket = HTC_PACKET_DEQUEUE(&ar->amsdu_rx_buffer_queue);
3966 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
3968 if (NULL == pPacket) {
3972 osBuf = pPacket->pPktContext;
3973 if (NULL == osBuf) {
3978 A_NETBUF_FREE(osBuf);
3984 /* refill the amsdu buffer list */
3985 static void ar6000_refill_amsdu_rxbufs(AR_SOFTC_T *ar, int Count)
3987 HTC_PACKET *pPacket;
3991 osBuf = A_NETBUF_ALLOC(AR6000_AMSDU_BUFFER_SIZE);
3992 if (NULL == osBuf) {
3995 /* the HTC packet wrapper is at the head of the reserved area
3997 pPacket = (HTC_PACKET *)(A_NETBUF_HEAD(osBuf));
3998 /* set re-fill info */
3999 SET_HTC_PACKET_INFO_RX_REFILL(pPacket,osBuf,A_NETBUF_DATA(osBuf),AR6000_AMSDU_BUFFER_SIZE,0);
4001 AR6000_SPIN_LOCK(&ar->arLock, 0);
4002 /* put it in the list */
4003 HTC_PACKET_ENQUEUE(&ar->amsdu_rx_buffer_queue,pPacket);
4004 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
4010 /* callback to allocate a large receive buffer for a pending packet. This function is called when
4011 * an HTC packet arrives whose length exceeds a threshold value
4013 * We use a pre-allocated list of buffers of maximum AMSDU size (4K). Under linux it is more optimal to
4014 * keep the allocation size the same to optimize cached-slab allocations.
4017 static HTC_PACKET *ar6000_alloc_amsdu_rxbuf(void *Context, HTC_ENDPOINT_ID Endpoint, int Length)
4019 HTC_PACKET *pPacket = NULL;
4020 AR_SOFTC_T *ar = (AR_SOFTC_T *)Context;
4021 int refillCount = 0;
4023 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_RX,("ar6000_alloc_amsdu_rxbuf: eid=%d, Length:%d\n",Endpoint,Length));
4027 if (Length <= AR6000_BUFFER_SIZE) {
4028 /* shouldn't be getting called on normal sized packets */
4033 if (Length > AR6000_AMSDU_BUFFER_SIZE) {
4038 AR6000_SPIN_LOCK(&ar->arLock, 0);
4039 /* allocate a packet from the list */
4040 pPacket = HTC_PACKET_DEQUEUE(&ar->amsdu_rx_buffer_queue);
4041 /* see if we need to refill again */
4042 refillCount = AR6000_MAX_AMSDU_RX_BUFFERS - HTC_PACKET_QUEUE_DEPTH(&ar->amsdu_rx_buffer_queue);
4043 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
4045 if (NULL == pPacket) {
4048 /* set actual endpoint ID */
4049 pPacket->Endpoint = Endpoint;
4053 if (refillCount >= AR6000_AMSDU_REFILL_THRESHOLD) {
4054 ar6000_refill_amsdu_rxbufs(ar,refillCount);
4061 ar6000_set_multicast_list(struct net_device *dev)
4063 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000: Multicast filter not supported\n"));
4066 static struct net_device_stats *
4067 ar6000_get_stats(struct net_device *dev)
4069 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
4070 return &ar->arNetStats;
4073 static struct iw_statistics *
4074 ar6000_get_iwstats(struct net_device * dev)
4076 AR_SOFTC_T *ar = (AR_SOFTC_T *)ar6k_priv(dev);
4077 TARGET_STATS *pStats = &ar->arTargetStats;
4078 struct iw_statistics * pIwStats = &ar->arIwStats;
4081 if (ar->bIsDestroyProgress || ar->arWmiReady == false || ar->arWlanState == WLAN_DISABLED)
4083 pIwStats->status = 0;
4084 pIwStats->qual.qual = 0;
4085 pIwStats->qual.level =0;
4086 pIwStats->qual.noise = 0;
4087 pIwStats->discard.code =0;
4088 pIwStats->discard.retries=0;
4089 pIwStats->miss.beacon =0;
4094 * The in_atomic function is used to determine if the scheduling is
4095 * allowed in the current context or not. This was introduced in 2.6
4096 * From what I have read on the differences between 2.4 and 2.6, the
4097 * 2.4 kernel did not support preemption and so this check might not
4098 * be required for 2.4 kernels.
4102 wmi_get_stats_cmd(ar->arWmi);
4104 pIwStats->status = 1 ;
4105 pIwStats->qual.qual = pStats->cs_aveBeacon_rssi - 161;
4106 pIwStats->qual.level =pStats->cs_aveBeacon_rssi; /* noise is -95 dBm */
4107 pIwStats->qual.noise = pStats->noise_floor_calibation;
4108 pIwStats->discard.code = pStats->rx_decrypt_err;
4109 pIwStats->discard.retries = pStats->tx_retry_cnt;
4110 pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
4115 rtnllocked = rtnl_is_locked();
4119 pIwStats->status = 0;
4121 if (down_interruptible(&ar->arSem)) {
4127 if (ar->bIsDestroyProgress || ar->arWlanState == WLAN_DISABLED) {
4131 ar->statsUpdatePending = true;
4133 if(wmi_get_stats_cmd(ar->arWmi) != A_OK) {
4137 wait_event_interruptible_timeout(arEvent, ar->statsUpdatePending == false, wmitimeout * HZ);
4138 if (signal_pending(current)) {
4139 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000 : WMI get stats timeout \n"));
4142 pIwStats->status = 1 ;
4143 pIwStats->qual.qual = pStats->cs_aveBeacon_rssi - 161;
4144 pIwStats->qual.level =pStats->cs_aveBeacon_rssi; /* noise is -95 dBm */
4145 pIwStats->qual.noise = pStats->noise_floor_calibation;
4146 pIwStats->discard.code = pStats->rx_decrypt_err;
4147 pIwStats->discard.retries = pStats->tx_retry_cnt;
4148 pIwStats->miss.beacon = pStats->cs_bmiss_cnt;
4161 ar6000_ready_event(void *devt, u8 *datap, u8 phyCap, u32 sw_ver, u32 abi_ver)
4163 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
4164 struct net_device *dev = ar->arNetDev;
4166 A_MEMCPY(dev->dev_addr, datap, AR6000_ETH_ADDR_LEN);
4167 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("mac address = %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
4168 dev->dev_addr[0], dev->dev_addr[1],
4169 dev->dev_addr[2], dev->dev_addr[3],
4170 dev->dev_addr[4], dev->dev_addr[5]));
4172 ar->arPhyCapability = phyCap;
4173 ar->arVersion.wlan_ver = sw_ver;
4174 ar->arVersion.abi_ver = abi_ver;
4176 /* Indicate to the waiting thread that the ready event was received */
4177 ar->arWmiReady = true;
4180 #if WLAN_CONFIG_IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN
4181 wmi_pmparams_cmd(ar->arWmi, 0, 1, 0, 0, 1, IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN);
4183 #if WLAN_CONFIG_DONOT_IGNORE_BARKER_IN_ERP
4184 wmi_set_lpreamble_cmd(ar->arWmi, 0, WMI_DONOT_IGNORE_BARKER_IN_ERP);
4186 wmi_set_keepalive_cmd(ar->arWmi, WLAN_CONFIG_KEEP_ALIVE_INTERVAL);
4187 #if WLAN_CONFIG_DISABLE_11N
4189 WMI_SET_HT_CAP_CMD htCap;
4191 A_MEMZERO(&htCap, sizeof(WMI_SET_HT_CAP_CMD));
4193 wmi_set_ht_cap_cmd(ar->arWmi, &htCap);
4196 wmi_set_ht_cap_cmd(ar->arWmi, &htCap);
4198 #endif /* WLAN_CONFIG_DISABLE_11N */
4200 #ifdef ATH6K_CONFIG_OTA_MODE
4201 wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER);
4203 wmi_disctimeout_cmd(ar->arWmi, WLAN_CONFIG_DISCONNECT_TIMEOUT);
4207 add_new_sta(AR_SOFTC_T *ar, u8 *mac, u16 aid, u8 *wpaie,
4208 u8 ielen, u8 keymgmt, u8 ucipher, u8 auth)
4212 A_MEMCPY(ar->sta_list[free_slot].mac, mac, ATH_MAC_LEN);
4213 A_MEMCPY(ar->sta_list[free_slot].wpa_ie, wpaie, ielen);
4214 ar->sta_list[free_slot].aid = aid;
4215 ar->sta_list[free_slot].keymgmt = keymgmt;
4216 ar->sta_list[free_slot].ucipher = ucipher;
4217 ar->sta_list[free_slot].auth = auth;
4218 ar->sta_list_index = ar->sta_list_index | (1 << free_slot);
4219 ar->arAPStats.sta[free_slot].aid = aid;
4223 ar6000_connect_event(AR_SOFTC_T *ar, u16 channel, u8 *bssid,
4224 u16 listenInterval, u16 beaconInterval,
4225 NETWORK_TYPE networkType, u8 beaconIeLen,
4226 u8 assocReqLen, u8 assocRespLen,
4229 union iwreq_data wrqu;
4230 int i, beacon_ie_pos, assoc_resp_ie_pos, assoc_req_ie_pos;
4231 static const char *tag1 = "ASSOCINFO(ReqIEs=";
4232 static const char *tag2 = "ASSOCRESPIE=";
4233 static const char *beaconIetag = "BEACONIE=";
4234 char buf[WMI_CONTROL_MSG_MAX_LEN * 2 + strlen(tag1) + 1];
4237 unsigned long flags;
4238 struct ieee80211req_key *ik;
4239 CRYPTO_TYPE keyType = NONE_CRYPT;
4241 if(ar->arNetworkType & AP_NETWORK) {
4242 struct net_device *dev = ar->arNetDev;
4243 if(A_MEMCMP(dev->dev_addr, bssid, ATH_MAC_LEN)==0) {
4244 ar->arACS = channel;
4245 ik = &ar->ap_mode_bkey;
4247 switch(ar->arAuthMode) {
4249 if(ar->arPairwiseCrypto == WEP_CRYPT) {
4250 ar6000_install_static_wep_keys(ar);
4253 else if(ar->arPairwiseCrypto == WAPI_CRYPT) {
4254 ap_set_wapi_key(ar, ik);
4260 case (WPA_PSK_AUTH|WPA2_PSK_AUTH):
4261 switch (ik->ik_type) {
4262 case IEEE80211_CIPHER_TKIP:
4263 keyType = TKIP_CRYPT;
4265 case IEEE80211_CIPHER_AES_CCM:
4266 keyType = AES_CRYPT;
4271 wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, keyType, GROUP_USAGE,
4272 ik->ik_keylen, (u8 *)&ik->ik_keyrsc,
4273 ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr,
4279 ar->arConnected = true;
4283 A_PRINTF("NEW STA %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x \n "
4284 " AID=%d \n", bssid[0], bssid[1], bssid[2],
4285 bssid[3], bssid[4], bssid[5], channel);
4286 switch ((listenInterval>>8)&0xFF) {
4288 A_PRINTF("AUTH: OPEN\n");
4291 A_PRINTF("AUTH: SHARED\n");
4294 A_PRINTF("AUTH: Unknown\n");
4297 switch (listenInterval&0xFF) {
4299 A_PRINTF("KeyMgmt: WPA-PSK\n");
4302 A_PRINTF("KeyMgmt: WPA2-PSK\n");
4305 A_PRINTF("KeyMgmt: NONE\n");
4308 switch (beaconInterval) {
4310 A_PRINTF("Cipher: AES\n");
4313 A_PRINTF("Cipher: TKIP\n");
4316 A_PRINTF("Cipher: WEP\n");
4320 A_PRINTF("Cipher: WAPI\n");
4324 A_PRINTF("Cipher: NONE\n");
4328 add_new_sta(ar, bssid, channel /*aid*/,
4329 assocInfo /* WPA IE */, assocRespLen /* IE len */,
4330 listenInterval&0xFF /* Keymgmt */, beaconInterval /* cipher */,
4331 (listenInterval>>8)&0xFF /* auth alg */);
4333 /* Send event to application */
4334 A_MEMZERO(&wrqu, sizeof(wrqu));
4335 A_MEMCPY(wrqu.addr.sa_data, bssid, ATH_MAC_LEN);
4336 wireless_send_event(ar->arNetDev, IWEVREGISTERED, &wrqu, NULL);
4337 /* In case the queue is stopped when we switch modes, this will
4340 netif_wake_queue(ar->arNetDev);
4344 #ifdef ATH6K_CONFIG_CFG80211
4345 ar6k_cfg80211_connect_event(ar, channel, bssid,
4346 listenInterval, beaconInterval,
4347 networkType, beaconIeLen,
4348 assocReqLen, assocRespLen,
4350 #endif /* ATH6K_CONFIG_CFG80211 */
4352 A_MEMCPY(ar->arBssid, bssid, sizeof(ar->arBssid));
4353 ar->arBssChannel = channel;
4355 A_PRINTF("AR6000 connected event on freq %d ", channel);
4356 A_PRINTF("with bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
4357 " listenInterval=%d, beaconInterval = %d, beaconIeLen = %d assocReqLen=%d"
4358 " assocRespLen =%d\n",
4359 bssid[0], bssid[1], bssid[2],
4360 bssid[3], bssid[4], bssid[5],
4361 listenInterval, beaconInterval,
4362 beaconIeLen, assocReqLen, assocRespLen);
4363 if (networkType & ADHOC_NETWORK) {
4364 if (networkType & ADHOC_CREATOR) {
4365 A_PRINTF("Network: Adhoc (Creator)\n");
4367 A_PRINTF("Network: Adhoc (Joiner)\n");
4370 A_PRINTF("Network: Infrastructure\n");
4373 if ((ar->arNetworkType == INFRA_NETWORK)) {
4374 wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB);
4377 if (beaconIeLen && (sizeof(buf) > (9 + beaconIeLen * 2))) {
4378 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nBeaconIEs= "));
4381 A_MEMZERO(buf, sizeof(buf));
4382 sprintf(buf, "%s", beaconIetag);
4384 for (i = beacon_ie_pos; i < beacon_ie_pos + beaconIeLen; i++) {
4385 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
4386 sprintf(pos, "%2.2x", assocInfo[i]);
4389 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4391 A_MEMZERO(&wrqu, sizeof(wrqu));
4392 wrqu.data.length = strlen(buf);
4393 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4396 if (assocRespLen && (sizeof(buf) > (12 + (assocRespLen * 2))))
4398 assoc_resp_ie_pos = beaconIeLen + assocReqLen +
4399 sizeof(u16) + /* capinfo*/
4400 sizeof(u16) + /* status Code */
4401 sizeof(u16) ; /* associd */
4402 A_MEMZERO(buf, sizeof(buf));
4403 sprintf(buf, "%s", tag2);
4405 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nAssocRespIEs= "));
4407 * The Association Response Frame w.o. the WLAN header is delivered to
4408 * the host, so skip over to the IEs
4410 for (i = assoc_resp_ie_pos; i < assoc_resp_ie_pos + assocRespLen - 6; i++)
4412 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
4413 sprintf(pos, "%2.2x", assocInfo[i]);
4416 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4418 A_MEMZERO(&wrqu, sizeof(wrqu));
4419 wrqu.data.length = strlen(buf);
4420 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4423 if (assocReqLen && (sizeof(buf) > (17 + (assocReqLen * 2)))) {
4425 * assoc Request includes capability and listen interval. Skip these.
4427 assoc_req_ie_pos = beaconIeLen +
4428 sizeof(u16) + /* capinfo*/
4429 sizeof(u16); /* listen interval */
4431 A_MEMZERO(buf, sizeof(buf));
4432 sprintf(buf, "%s", tag1);
4434 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("AssocReqIEs= "));
4435 for (i = assoc_req_ie_pos; i < assoc_req_ie_pos + assocReqLen - 4; i++) {
4436 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
4437 sprintf(pos, "%2.2x", assocInfo[i]);
4440 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4442 A_MEMZERO(&wrqu, sizeof(wrqu));
4443 wrqu.data.length = strlen(buf);
4444 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4448 if (ar->user_savedkeys_stat == USER_SAVEDKEYS_STAT_RUN &&
4449 ar->user_saved_keys.keyOk == true)
4451 key_op_ctrl = KEY_OP_VALID_MASK & ~KEY_OP_INIT_TSC;
4453 if (ar->user_key_ctrl & AR6000_USER_SETKEYS_RSC_UNCHANGED) {
4454 key_op_ctrl &= ~KEY_OP_INIT_RSC;
4456 key_op_ctrl |= KEY_OP_INIT_RSC;
4458 ar6000_reinstall_keys(ar, key_op_ctrl);
4460 #endif /* USER_KEYS */
4462 netif_wake_queue(ar->arNetDev);
4464 /* For CFG80211 the key configuration and the default key comes in after connect so no point in plumbing invalid keys */
4465 #ifndef ATH6K_CONFIG_CFG80211
4466 if ((networkType & ADHOC_NETWORK) &&
4467 (OPEN_AUTH == ar->arDot11AuthMode) &&
4468 (NONE_AUTH == ar->arAuthMode) &&
4469 (WEP_CRYPT == ar->arPairwiseCrypto))
4471 if (!ar->arConnected) {
4472 wmi_addKey_cmd(ar->arWmi,
4473 ar->arDefTxKeyIndex,
4475 GROUP_USAGE | TX_USAGE,
4476 ar->arWepKeyList[ar->arDefTxKeyIndex].arKeyLen,
4478 ar->arWepKeyList[ar->arDefTxKeyIndex].arKey, KEY_OP_INIT_VAL, NULL,
4482 #endif /* ATH6K_CONFIG_CFG80211 */
4484 /* Update connect & link status atomically */
4485 spin_lock_irqsave(&ar->arLock, flags);
4486 ar->arConnected = true;
4487 ar->arConnectPending = false;
4488 netif_carrier_on(ar->arNetDev);
4489 spin_unlock_irqrestore(&ar->arLock, flags);
4490 /* reset the rx aggr state */
4491 aggr_reset_state(ar->aggr_cntxt);
4494 A_MEMZERO(&wrqu, sizeof(wrqu));
4495 A_MEMCPY(wrqu.addr.sa_data, bssid, IEEE80211_ADDR_LEN);
4496 wrqu.addr.sa_family = ARPHRD_ETHER;
4497 wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
4498 if ((ar->arNetworkType == ADHOC_NETWORK) && ar->arIbssPsEnable) {
4499 A_MEMZERO(ar->arNodeMap, sizeof(ar->arNodeMap));
4501 ar->arNexEpId = ENDPOINT_2;
4503 if (!ar->arUserBssFilter) {
4504 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
4509 void ar6000_set_numdataendpts(AR_SOFTC_T *ar, u32 num)
4511 A_ASSERT(num <= (HTC_MAILBOX_NUM_MAX - 1));
4512 ar->arNumDataEndPts = num;
4516 sta_cleanup(AR_SOFTC_T *ar, u8 i)
4518 struct sk_buff *skb;
4520 /* empty the queued pkts in the PS queue if any */
4521 A_MUTEX_LOCK(&ar->sta_list[i].psqLock);
4522 while (!A_NETBUF_QUEUE_EMPTY(&ar->sta_list[i].psq)) {
4523 skb = A_NETBUF_DEQUEUE(&ar->sta_list[i].psq);
4526 A_MUTEX_UNLOCK(&ar->sta_list[i].psqLock);
4528 /* Zero out the state fields */
4529 A_MEMZERO(&ar->arAPStats.sta[ar->sta_list[i].aid-1], sizeof(WMI_PER_STA_STAT));
4530 A_MEMZERO(&ar->sta_list[i].mac, ATH_MAC_LEN);
4531 A_MEMZERO(&ar->sta_list[i].wpa_ie, IEEE80211_MAX_IE);
4532 ar->sta_list[i].aid = 0;
4533 ar->sta_list[i].flags = 0;
4535 ar->sta_list_index = ar->sta_list_index & ~(1 << i);
4539 u8 remove_sta(AR_SOFTC_T *ar, u8 *mac, u16 reason)
4543 if(IS_MAC_NULL(mac)) {
4547 if(IS_MAC_BCAST(mac)) {
4548 A_PRINTF("DEL ALL STA\n");
4549 for(i=0; i < AP_MAX_NUM_STA; i++) {
4550 if(!IS_MAC_NULL(ar->sta_list[i].mac)) {
4556 for(i=0; i < AP_MAX_NUM_STA; i++) {
4557 if(A_MEMCMP(ar->sta_list[i].mac, mac, ATH_MAC_LEN)==0) {
4558 A_PRINTF("DEL STA %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x "
4559 " aid=%d REASON=%d\n", mac[0], mac[1], mac[2],
4560 mac[3], mac[4], mac[5], ar->sta_list[i].aid, reason);
4572 ar6000_disconnect_event(AR_SOFTC_T *ar, u8 reason, u8 *bssid,
4573 u8 assocRespLen, u8 *assocInfo, u16 protocolReasonStatus)
4576 unsigned long flags;
4577 union iwreq_data wrqu;
4579 if(ar->arNetworkType & AP_NETWORK) {
4580 union iwreq_data wrqu;
4581 struct sk_buff *skb;
4583 if(!remove_sta(ar, bssid, protocolReasonStatus)) {
4587 /* If there are no more associated STAs, empty the mcast PS q */
4588 if (ar->sta_list_index == 0) {
4589 A_MUTEX_LOCK(&ar->mcastpsqLock);
4590 while (!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) {
4591 skb = A_NETBUF_DEQUEUE(&ar->mcastpsq);
4594 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
4596 /* Clear the LSB of the BitMapCtl field of the TIM IE */
4597 if (ar->arWmiReady) {
4598 wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 0);
4602 if(!IS_MAC_BCAST(bssid)) {
4603 /* Send event to application */
4604 A_MEMZERO(&wrqu, sizeof(wrqu));
4605 A_MEMCPY(wrqu.addr.sa_data, bssid, ATH_MAC_LEN);
4606 wireless_send_event(ar->arNetDev, IWEVEXPIRED, &wrqu, NULL);
4611 #ifdef ATH6K_CONFIG_CFG80211
4612 ar6k_cfg80211_disconnect_event(ar, reason, bssid,
4613 assocRespLen, assocInfo,
4614 protocolReasonStatus);
4615 #endif /* ATH6K_CONFIG_CFG80211 */
4617 /* Send disconnect event to supplicant */
4618 A_MEMZERO(&wrqu, sizeof(wrqu));
4619 wrqu.addr.sa_family = ARPHRD_ETHER;
4620 wireless_send_event(ar->arNetDev, SIOCGIWAP, &wrqu, NULL);
4622 /* it is necessary to clear the host-side rx aggregation state */
4623 aggr_reset_state(ar->aggr_cntxt);
4625 A_UNTIMEOUT(&ar->disconnect_timer);
4627 A_PRINTF("AR6000 disconnected");
4628 if (bssid[0] || bssid[1] || bssid[2] || bssid[3] || bssid[4] || bssid[5]) {
4629 A_PRINTF(" from %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
4630 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4], bssid[5]);
4633 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nDisconnect Reason is %d", reason));
4634 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nProtocol Reason/Status Code is %d", protocolReasonStatus));
4635 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\nAssocResp Frame = %s",
4636 assocRespLen ? " " : "NULL"));
4637 for (i = 0; i < assocRespLen; i++) {
4639 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4641 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("%2.2x ", assocInfo[i]));
4643 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("\n"));
4645 * If the event is due to disconnect cmd from the host, only they the target
4646 * would stop trying to connect. Under any other condition, target would
4647 * keep trying to connect.
4650 if( reason == DISCONNECT_CMD)
4652 ar->arConnectPending = false;
4653 if ((!ar->arUserBssFilter) && (ar->arWmiReady)) {
4654 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
4657 ar->arConnectPending = true;
4658 if (((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x11)) ||
4659 ((reason == ASSOC_FAILED) && (protocolReasonStatus == 0x0) && (reconnect_flag == 1))) {
4660 ar->arConnected = true;
4665 if ((reason == NO_NETWORK_AVAIL) && (ar->arWmiReady))
4667 bss_t *pWmiSsidnode = NULL;
4669 /* remove the current associated bssid node */
4670 wmi_free_node (ar->arWmi, bssid);
4673 * In case any other same SSID nodes are present
4674 * remove it, since those nodes also not available now
4679 * Find the nodes based on SSID and remove it
4680 * NOTE :: This case will not work out for Hidden-SSID
4682 pWmiSsidnode = wmi_find_Ssidnode (ar->arWmi, ar->arSsid, ar->arSsidLen, false, true);
4686 wmi_free_node (ar->arWmi, pWmiSsidnode->ni_macaddr);
4689 } while (pWmiSsidnode);
4692 /* Update connect & link status atomically */
4693 spin_lock_irqsave(&ar->arLock, flags);
4694 ar->arConnected = false;
4695 netif_carrier_off(ar->arNetDev);
4696 spin_unlock_irqrestore(&ar->arLock, flags);
4698 if( (reason != CSERV_DISCONNECT) || (reconnect_flag != 1) ) {
4703 if (reason != CSERV_DISCONNECT)
4705 ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
4706 ar->user_key_ctrl = 0;
4708 #endif /* USER_KEYS */
4710 netif_stop_queue(ar->arNetDev);
4711 A_MEMZERO(ar->arBssid, sizeof(ar->arBssid));
4712 ar->arBssChannel = 0;
4713 ar->arBeaconInterval = 0;
4715 ar6000_TxDataCleanup(ar);
4719 ar6000_regDomain_event(AR_SOFTC_T *ar, u32 regCode)
4721 A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode);
4722 ar->arRegCode = regCode;
4725 #ifdef ATH_AR6K_11N_SUPPORT
4727 ar6000_aggr_rcv_addba_req_evt(AR_SOFTC_T *ar, WMI_ADDBA_REQ_EVENT *evt)
4729 if(evt->status == 0) {
4730 aggr_recv_addba_req_evt(ar->aggr_cntxt, evt->tid, evt->st_seq_no, evt->win_sz);
4735 ar6000_aggr_rcv_addba_resp_evt(AR_SOFTC_T *ar, WMI_ADDBA_RESP_EVENT *evt)
4737 A_PRINTF("ADDBA RESP. tid %d status %d, sz %d\n", evt->tid, evt->status, evt->amsdu_sz);
4738 if(evt->status == 0) {
4743 ar6000_aggr_rcv_delba_req_evt(AR_SOFTC_T *ar, WMI_DELBA_EVENT *evt)
4745 aggr_recv_delba_req_evt(ar->aggr_cntxt, evt->tid);
4749 void register_pal_cb(ar6k_pal_config_t *palConfig_p)
4751 ar6k_pal_config_g = *palConfig_p;
4755 ar6000_hci_event_rcv_evt(struct ar6_softc *ar, WMI_HCI_EVENT *cmd)
4762 size = cmd->evt_buf_sz + 4;
4763 osbuf = A_NETBUF_ALLOC(size);
4764 if (osbuf == NULL) {
4766 A_PRINTF("Error in allocating netbuf \n");
4770 A_NETBUF_PUT(osbuf, size);
4771 buf = (u8 *)A_NETBUF_DATA(osbuf);
4772 /* First 2-bytes carry HCI event/ACL data type
4773 * the next 2 are free
4775 *((short *)buf) = WMI_HCI_EVENT_EVENTID;
4777 A_MEMCPY(buf, cmd->buf, cmd->evt_buf_sz);
4779 if(ar6k_pal_config_g.fpar6k_pal_recv_pkt)
4781 /* pass the cmd packet to PAL driver */
4782 if((*ar6k_pal_config_g.fpar6k_pal_recv_pkt)(ar->hcipal_info, osbuf) == true)
4785 ar6000_deliver_frames_to_nw_stack(ar->arNetDev, osbuf);
4787 A_PRINTF_LOG("HCI Event From PAL <-- \n");
4788 for(i = 0; i < cmd->evt_buf_sz; i++) {
4789 A_PRINTF_LOG("0x%02x ", cmd->buf[i]);
4795 A_PRINTF_LOG("==================================\n");
4800 ar6000_neighborReport_event(AR_SOFTC_T *ar, int numAps, WMI_NEIGHBOR_INFO *info)
4802 #if WIRELESS_EXT >= 18
4803 struct iw_pmkid_cand *pmkcand;
4804 #else /* WIRELESS_EXT >= 18 */
4805 static const char *tag = "PRE-AUTH";
4807 #endif /* WIRELESS_EXT >= 18 */
4809 union iwreq_data wrqu;
4812 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("AR6000 Neighbor Report Event\n"));
4813 for (i=0; i < numAps; info++, i++) {
4814 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",
4815 info->bssid[0], info->bssid[1], info->bssid[2],
4816 info->bssid[3], info->bssid[4], info->bssid[5]));
4817 if (info->bssFlags & WMI_PREAUTH_CAPABLE_BSS) {
4818 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("preauth-cap"));
4820 if (info->bssFlags & WMI_PMKID_VALID_BSS) {
4821 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,(" pmkid-valid\n"));
4822 continue; /* we skip bss if the pmkid is already valid */
4824 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,("\n"));
4825 A_MEMZERO(&wrqu, sizeof(wrqu));
4826 #if WIRELESS_EXT >= 18
4827 pmkcand = A_MALLOC_NOWAIT(sizeof(struct iw_pmkid_cand));
4828 A_MEMZERO(pmkcand, sizeof(struct iw_pmkid_cand));
4830 pmkcand->flags = info->bssFlags;
4831 A_MEMCPY(pmkcand->bssid.sa_data, info->bssid, ATH_MAC_LEN);
4832 wrqu.data.length = sizeof(struct iw_pmkid_cand);
4833 wireless_send_event(ar->arNetDev, IWEVPMKIDCAND, &wrqu, (char *)pmkcand);
4835 #else /* WIRELESS_EXT >= 18 */
4836 snprintf(buf, sizeof(buf), "%s%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x%2.2x",
4838 info->bssid[0], info->bssid[1], info->bssid[2],
4839 info->bssid[3], info->bssid[4], info->bssid[5],
4841 wrqu.data.length = strlen(buf);
4842 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4843 #endif /* WIRELESS_EXT >= 18 */
4848 ar6000_tkip_micerr_event(AR_SOFTC_T *ar, u8 keyid, bool ismcast)
4850 static const char *tag = "MLME-MICHAELMICFAILURE.indication";
4852 union iwreq_data wrqu;
4855 * For AP case, keyid will have aid of STA which sent pkt with
4856 * MIC error. Use this aid to get MAC & send it to hostapd.
4858 if (ar->arNetworkType == AP_NETWORK) {
4859 sta_t *s = ieee80211_find_conn_for_aid(ar, (keyid >> 2));
4861 A_PRINTF("AP TKIP MIC error received from Invalid aid / STA not found =%d\n", keyid);
4864 A_PRINTF("AP TKIP MIC error received from aid=%d\n", keyid);
4865 snprintf(buf,sizeof(buf), "%s addr=%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x",
4866 tag, s->mac[0],s->mac[1],s->mac[2],s->mac[3],s->mac[4],s->mac[5]);
4869 #ifdef ATH6K_CONFIG_CFG80211
4870 ar6k_cfg80211_tkip_micerr_event(ar, keyid, ismcast);
4871 #endif /* ATH6K_CONFIG_CFG80211 */
4873 A_PRINTF("AR6000 TKIP MIC error received for keyid %d %scast\n",
4874 keyid & 0x3, ismcast ? "multi": "uni");
4875 snprintf(buf, sizeof(buf), "%s(keyid=%d %sicast)", tag, keyid & 0x3,
4876 ismcast ? "mult" : "un");
4879 memset(&wrqu, 0, sizeof(wrqu));
4880 wrqu.data.length = strlen(buf);
4881 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
4885 ar6000_scanComplete_event(AR_SOFTC_T *ar, int status)
4888 #ifdef ATH6K_CONFIG_CFG80211
4889 ar6k_cfg80211_scanComplete_event(ar, status);
4890 #endif /* ATH6K_CONFIG_CFG80211 */
4892 if (!ar->arUserBssFilter) {
4893 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
4895 if (ar->scan_triggered) {
4897 union iwreq_data wrqu;
4898 A_MEMZERO(&wrqu, sizeof(wrqu));
4899 wireless_send_event(ar->arNetDev, SIOCGIWSCAN, &wrqu, NULL);
4901 ar->scan_triggered = 0;
4904 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_SCAN,( "AR6000 scan complete: %d\n", status));
4908 ar6000_targetStats_event(AR_SOFTC_T *ar, u8 *ptr, u32 len)
4912 if(ar->arNetworkType == AP_NETWORK) {
4913 WMI_AP_MODE_STAT *p = (WMI_AP_MODE_STAT *)ptr;
4914 WMI_AP_MODE_STAT *ap = &ar->arAPStats;
4916 if (len < sizeof(*p)) {
4920 for(ac=0;ac<AP_MAX_NUM_STA;ac++) {
4921 ap->sta[ac].tx_bytes += p->sta[ac].tx_bytes;
4922 ap->sta[ac].tx_pkts += p->sta[ac].tx_pkts;
4923 ap->sta[ac].tx_error += p->sta[ac].tx_error;
4924 ap->sta[ac].tx_discard += p->sta[ac].tx_discard;
4925 ap->sta[ac].rx_bytes += p->sta[ac].rx_bytes;
4926 ap->sta[ac].rx_pkts += p->sta[ac].rx_pkts;
4927 ap->sta[ac].rx_error += p->sta[ac].rx_error;
4928 ap->sta[ac].rx_discard += p->sta[ac].rx_discard;
4932 WMI_TARGET_STATS *pTarget = (WMI_TARGET_STATS *)ptr;
4933 TARGET_STATS *pStats = &ar->arTargetStats;
4935 if (len < sizeof(*pTarget)) {
4939 // Update the RSSI of the connected bss.
4940 if (ar->arConnected) {
4941 bss_t *pConnBss = NULL;
4943 pConnBss = wmi_find_node(ar->arWmi,ar->arBssid);
4946 pConnBss->ni_rssi = pTarget->cservStats.cs_aveBeacon_rssi;
4947 pConnBss->ni_snr = pTarget->cservStats.cs_aveBeacon_snr;
4948 wmi_node_return(ar->arWmi, pConnBss);
4952 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 updating target stats\n"));
4953 pStats->tx_packets += pTarget->txrxStats.tx_stats.tx_packets;
4954 pStats->tx_bytes += pTarget->txrxStats.tx_stats.tx_bytes;
4955 pStats->tx_unicast_pkts += pTarget->txrxStats.tx_stats.tx_unicast_pkts;
4956 pStats->tx_unicast_bytes += pTarget->txrxStats.tx_stats.tx_unicast_bytes;
4957 pStats->tx_multicast_pkts += pTarget->txrxStats.tx_stats.tx_multicast_pkts;
4958 pStats->tx_multicast_bytes += pTarget->txrxStats.tx_stats.tx_multicast_bytes;
4959 pStats->tx_broadcast_pkts += pTarget->txrxStats.tx_stats.tx_broadcast_pkts;
4960 pStats->tx_broadcast_bytes += pTarget->txrxStats.tx_stats.tx_broadcast_bytes;
4961 pStats->tx_rts_success_cnt += pTarget->txrxStats.tx_stats.tx_rts_success_cnt;
4962 for(ac = 0; ac < WMM_NUM_AC; ac++)
4963 pStats->tx_packet_per_ac[ac] += pTarget->txrxStats.tx_stats.tx_packet_per_ac[ac];
4964 pStats->tx_errors += pTarget->txrxStats.tx_stats.tx_errors;
4965 pStats->tx_failed_cnt += pTarget->txrxStats.tx_stats.tx_failed_cnt;
4966 pStats->tx_retry_cnt += pTarget->txrxStats.tx_stats.tx_retry_cnt;
4967 pStats->tx_mult_retry_cnt += pTarget->txrxStats.tx_stats.tx_mult_retry_cnt;
4968 pStats->tx_rts_fail_cnt += pTarget->txrxStats.tx_stats.tx_rts_fail_cnt;
4969 pStats->tx_unicast_rate = wmi_get_rate(pTarget->txrxStats.tx_stats.tx_unicast_rate);
4971 pStats->rx_packets += pTarget->txrxStats.rx_stats.rx_packets;
4972 pStats->rx_bytes += pTarget->txrxStats.rx_stats.rx_bytes;
4973 pStats->rx_unicast_pkts += pTarget->txrxStats.rx_stats.rx_unicast_pkts;
4974 pStats->rx_unicast_bytes += pTarget->txrxStats.rx_stats.rx_unicast_bytes;
4975 pStats->rx_multicast_pkts += pTarget->txrxStats.rx_stats.rx_multicast_pkts;
4976 pStats->rx_multicast_bytes += pTarget->txrxStats.rx_stats.rx_multicast_bytes;
4977 pStats->rx_broadcast_pkts += pTarget->txrxStats.rx_stats.rx_broadcast_pkts;
4978 pStats->rx_broadcast_bytes += pTarget->txrxStats.rx_stats.rx_broadcast_bytes;
4979 pStats->rx_fragment_pkt += pTarget->txrxStats.rx_stats.rx_fragment_pkt;
4980 pStats->rx_errors += pTarget->txrxStats.rx_stats.rx_errors;
4981 pStats->rx_crcerr += pTarget->txrxStats.rx_stats.rx_crcerr;
4982 pStats->rx_key_cache_miss += pTarget->txrxStats.rx_stats.rx_key_cache_miss;
4983 pStats->rx_decrypt_err += pTarget->txrxStats.rx_stats.rx_decrypt_err;
4984 pStats->rx_duplicate_frames += pTarget->txrxStats.rx_stats.rx_duplicate_frames;
4985 pStats->rx_unicast_rate = wmi_get_rate(pTarget->txrxStats.rx_stats.rx_unicast_rate);
4988 pStats->tkip_local_mic_failure
4989 += pTarget->txrxStats.tkipCcmpStats.tkip_local_mic_failure;
4990 pStats->tkip_counter_measures_invoked
4991 += pTarget->txrxStats.tkipCcmpStats.tkip_counter_measures_invoked;
4992 pStats->tkip_replays += pTarget->txrxStats.tkipCcmpStats.tkip_replays;
4993 pStats->tkip_format_errors += pTarget->txrxStats.tkipCcmpStats.tkip_format_errors;
4994 pStats->ccmp_format_errors += pTarget->txrxStats.tkipCcmpStats.ccmp_format_errors;
4995 pStats->ccmp_replays += pTarget->txrxStats.tkipCcmpStats.ccmp_replays;
4997 pStats->power_save_failure_cnt += pTarget->pmStats.power_save_failure_cnt;
4998 pStats->noise_floor_calibation = pTarget->noise_floor_calibation;
5000 pStats->cs_bmiss_cnt += pTarget->cservStats.cs_bmiss_cnt;
5001 pStats->cs_lowRssi_cnt += pTarget->cservStats.cs_lowRssi_cnt;
5002 pStats->cs_connect_cnt += pTarget->cservStats.cs_connect_cnt;
5003 pStats->cs_disconnect_cnt += pTarget->cservStats.cs_disconnect_cnt;
5004 pStats->cs_aveBeacon_snr = pTarget->cservStats.cs_aveBeacon_snr;
5005 pStats->cs_aveBeacon_rssi = pTarget->cservStats.cs_aveBeacon_rssi;
5007 if (enablerssicompensation) {
5008 pStats->cs_aveBeacon_rssi =
5009 rssi_compensation_calc(ar, pStats->cs_aveBeacon_rssi);
5011 pStats->cs_lastRoam_msec = pTarget->cservStats.cs_lastRoam_msec;
5012 pStats->cs_snr = pTarget->cservStats.cs_snr;
5013 pStats->cs_rssi = pTarget->cservStats.cs_rssi;
5015 pStats->lq_val = pTarget->lqVal;
5017 pStats->wow_num_pkts_dropped += pTarget->wowStats.wow_num_pkts_dropped;
5018 pStats->wow_num_host_pkt_wakeups += pTarget->wowStats.wow_num_host_pkt_wakeups;
5019 pStats->wow_num_host_event_wakeups += pTarget->wowStats.wow_num_host_event_wakeups;
5020 pStats->wow_num_events_discarded += pTarget->wowStats.wow_num_events_discarded;
5021 pStats->arp_received += pTarget->arpStats.arp_received;
5022 pStats->arp_matched += pTarget->arpStats.arp_matched;
5023 pStats->arp_replied += pTarget->arpStats.arp_replied;
5025 if (ar->statsUpdatePending) {
5026 ar->statsUpdatePending = false;
5033 ar6000_rssiThreshold_event(AR_SOFTC_T *ar, WMI_RSSI_THRESHOLD_VAL newThreshold, s16 rssi)
5035 USER_RSSI_THOLD userRssiThold;
5037 rssi = rssi + SIGNAL_QUALITY_NOISE_FLOOR;
5039 if (enablerssicompensation) {
5040 rssi = rssi_compensation_calc(ar, rssi);
5043 /* Send an event to the app */
5044 userRssiThold.tag = ar->rssi_map[newThreshold].tag;
5045 userRssiThold.rssi = rssi;
5046 A_PRINTF("rssi Threshold range = %d tag = %d rssi = %d\n", newThreshold,
5047 userRssiThold.tag, userRssiThold.rssi);
5049 ar6000_send_event_to_app(ar, WMI_RSSI_THRESHOLD_EVENTID,(u8 *)&userRssiThold, sizeof(USER_RSSI_THOLD));
5054 ar6000_hbChallengeResp_event(AR_SOFTC_T *ar, u32 cookie, u32 source)
5056 if (source == APP_HB_CHALLENGE) {
5057 /* Report it to the app in case it wants a positive acknowledgement */
5058 ar6000_send_event_to_app(ar, WMIX_HB_CHALLENGE_RESP_EVENTID,
5059 (u8 *)&cookie, sizeof(cookie));
5061 /* This would ignore the replys that come in after their due time */
5062 if (cookie == ar->arHBChallengeResp.seqNum) {
5063 ar->arHBChallengeResp.outstanding = false;
5070 ar6000_reportError_event(AR_SOFTC_T *ar, WMI_TARGET_ERROR_VAL errorVal)
5072 static const char * const errString[] = {
5073 [WMI_TARGET_PM_ERR_FAIL] "WMI_TARGET_PM_ERR_FAIL",
5074 [WMI_TARGET_KEY_NOT_FOUND] "WMI_TARGET_KEY_NOT_FOUND",
5075 [WMI_TARGET_DECRYPTION_ERR] "WMI_TARGET_DECRYPTION_ERR",
5076 [WMI_TARGET_BMISS] "WMI_TARGET_BMISS",
5077 [WMI_PSDISABLE_NODE_JOIN] "WMI_PSDISABLE_NODE_JOIN"
5080 A_PRINTF("AR6000 Error on Target. Error = 0x%x\n", errorVal);
5082 /* One error is reported at a time, and errorval is a bitmask */
5083 if(errorVal & (errorVal - 1))
5086 A_PRINTF("AR6000 Error type = ");
5089 case WMI_TARGET_PM_ERR_FAIL:
5090 case WMI_TARGET_KEY_NOT_FOUND:
5091 case WMI_TARGET_DECRYPTION_ERR:
5092 case WMI_TARGET_BMISS:
5093 case WMI_PSDISABLE_NODE_JOIN:
5094 A_PRINTF("%s\n", errString[errorVal]);
5097 A_PRINTF("INVALID\n");
5105 ar6000_cac_event(AR_SOFTC_T *ar, u8 ac, u8 cacIndication,
5106 u8 statusCode, u8 *tspecSuggestion)
5108 WMM_TSPEC_IE *tspecIe;
5111 * This is the TSPEC IE suggestion from AP.
5112 * Suggestion provided by AP under some error
5113 * cases, could be helpful for the host app.
5114 * Check documentation.
5116 tspecIe = (WMM_TSPEC_IE *)tspecSuggestion;
5119 * What do we do, if we get TSPEC rejection? One thought
5120 * that comes to mind is implictly delete the pstream...
5122 A_PRINTF("AR6000 CAC notification. "
5123 "AC = %d, cacIndication = 0x%x, statusCode = 0x%x\n",
5124 ac, cacIndication, statusCode);
5128 ar6000_channel_change_event(AR_SOFTC_T *ar, u16 oldChannel,
5131 A_PRINTF("Channel Change notification\nOld Channel: %d, New Channel: %d\n",
5132 oldChannel, newChannel);
5135 #define AR6000_PRINT_BSSID(_pBss) do { \
5136 A_PRINTF("%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ",\
5137 (_pBss)[0],(_pBss)[1],(_pBss)[2],(_pBss)[3],\
5138 (_pBss)[4],(_pBss)[5]); \
5142 ar6000_roam_tbl_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_TBL *pTbl)
5146 A_PRINTF("ROAM TABLE NO OF ENTRIES is %d ROAM MODE is %d\n",
5147 pTbl->numEntries, pTbl->roamMode);
5148 for (i= 0; i < pTbl->numEntries; i++) {
5149 A_PRINTF("[%d]bssid %2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x ", i,
5150 pTbl->bssRoamInfo[i].bssid[0], pTbl->bssRoamInfo[i].bssid[1],
5151 pTbl->bssRoamInfo[i].bssid[2],
5152 pTbl->bssRoamInfo[i].bssid[3],
5153 pTbl->bssRoamInfo[i].bssid[4],
5154 pTbl->bssRoamInfo[i].bssid[5]);
5155 A_PRINTF("RSSI %d RSSIDT %d LAST RSSI %d UTIL %d ROAM_UTIL %d"
5157 pTbl->bssRoamInfo[i].rssi,
5158 pTbl->bssRoamInfo[i].rssidt,
5159 pTbl->bssRoamInfo[i].last_rssi,
5160 pTbl->bssRoamInfo[i].util,
5161 pTbl->bssRoamInfo[i].roam_util,
5162 pTbl->bssRoamInfo[i].bias);
5167 ar6000_wow_list_event(struct ar6_softc *ar, u8 num_filters, WMI_GET_WOW_LIST_REPLY *wow_reply)
5171 /*Each event now contains exactly one filter, see bug 26613*/
5172 A_PRINTF("WOW pattern %d of %d patterns\n", wow_reply->this_filter_num, wow_reply->num_filters);
5173 A_PRINTF("wow mode = %s host mode = %s\n",
5174 (wow_reply->wow_mode == 0? "disabled":"enabled"),
5175 (wow_reply->host_mode == 1 ? "awake":"asleep"));
5178 /*If there are no patterns, the reply will only contain generic
5179 WoW information. Pattern information will exist only if there are
5180 patterns present. Bug 26716*/
5182 /* If this event contains pattern information, display it*/
5183 if (wow_reply->this_filter_num) {
5185 A_PRINTF("id=%d size=%d offset=%d\n",
5186 wow_reply->wow_filters[i].wow_filter_id,
5187 wow_reply->wow_filters[i].wow_filter_size,
5188 wow_reply->wow_filters[i].wow_filter_offset);
5189 A_PRINTF("wow pattern = ");
5190 for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
5191 A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_pattern[j]);
5194 A_PRINTF("\nwow mask = ");
5195 for (j=0; j< wow_reply->wow_filters[i].wow_filter_size; j++) {
5196 A_PRINTF("%2.2x",wow_reply->wow_filters[i].wow_filter_mask[j]);
5203 * Report the Roaming related data collected on the target
5206 ar6000_display_roam_time(WMI_TARGET_ROAM_TIME *p)
5208 A_PRINTF("Disconnect Data : BSSID: ");
5209 AR6000_PRINT_BSSID(p->disassoc_bssid);
5210 A_PRINTF(" RSSI %d DISASSOC Time %d NO_TXRX_TIME %d\n",
5211 p->disassoc_bss_rssi,p->disassoc_time,
5213 A_PRINTF("Connect Data: BSSID: ");
5214 AR6000_PRINT_BSSID(p->assoc_bssid);
5215 A_PRINTF(" RSSI %d ASSOC Time %d TXRX_TIME %d\n",
5216 p->assoc_bss_rssi,p->assoc_time,
5217 p->allow_txrx_time);
5221 ar6000_roam_data_event(AR_SOFTC_T *ar, WMI_TARGET_ROAM_DATA *p)
5223 switch (p->roamDataType) {
5224 case ROAM_DATA_TIME:
5225 ar6000_display_roam_time(&p->u.roamTime);
5233 ar6000_bssInfo_event_rx(AR_SOFTC_T *ar, u8 *datap, int len)
5235 struct sk_buff *skb;
5236 WMI_BSS_INFO_HDR *bih = (WMI_BSS_INFO_HDR *)datap;
5239 if (!ar->arMgmtFilter) {
5242 if (((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_BEACON) &&
5243 (bih->frameType != BEACON_FTYPE)) ||
5244 ((ar->arMgmtFilter & IEEE80211_FILTER_TYPE_PROBE_RESP) &&
5245 (bih->frameType != PROBERESP_FTYPE)))
5250 if ((skb = A_NETBUF_ALLOC_RAW(len)) != NULL) {
5252 A_NETBUF_PUT(skb, len);
5253 A_MEMCPY(A_NETBUF_DATA(skb), datap, len);
5254 skb->dev = ar->arNetDev;
5255 A_MEMCPY(skb_mac_header(skb), A_NETBUF_DATA(skb), 6);
5256 skb->ip_summed = CHECKSUM_NONE;
5257 skb->pkt_type = PACKET_OTHERHOST;
5258 skb->protocol = __constant_htons(0x0019);
5266 ar6000_control_tx(void *devt, void *osbuf, HTC_ENDPOINT_ID eid)
5268 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
5270 struct ar_cookie *cookie = NULL;
5273 if (ar->arWowState != WLAN_WOW_STATE_NONE) {
5274 A_NETBUF_FREE(osbuf);
5277 #endif /* CONFIG_PM */
5278 /* take lock to protect ar6000_alloc_cookie() */
5279 AR6000_SPIN_LOCK(&ar->arLock, 0);
5283 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_TX,("ar_contrstatus = ol_tx: skb=0x%lx, len=0x%x eid =%d\n",
5284 (unsigned long)osbuf, A_NETBUF_LEN(osbuf), eid));
5286 if (ar->arWMIControlEpFull && (eid == ar->arControlEp)) {
5287 /* control endpoint is full, don't allocate resources, we
5288 * are just going to drop this packet */
5290 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" WMI Control EP full, dropping packet : 0x%lX, len:%d \n",
5291 (unsigned long)osbuf, A_NETBUF_LEN(osbuf)));
5293 cookie = ar6000_alloc_cookie(ar);
5296 if (cookie == NULL) {
5297 status = A_NO_MEMORY;
5302 A_PRINTF("WMI cmd send, msgNo %d :", wmiSendCmdNum);
5303 for(i = 0; i < a_netbuf_to_len(osbuf); i++)
5304 A_PRINTF("%x ", ((u8 *)a_netbuf_to_data(osbuf))[i]);
5312 if (cookie != NULL) {
5313 /* got a structure to send it out on */
5314 ar->arTxPending[eid]++;
5316 if (eid != ar->arControlEp) {
5317 ar->arTotalTxDataPending++;
5321 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
5323 if (cookie != NULL) {
5324 cookie->arc_bp[0] = (unsigned long)osbuf;
5325 cookie->arc_bp[1] = 0;
5326 SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
5328 A_NETBUF_DATA(osbuf),
5329 A_NETBUF_LEN(osbuf),
5331 AR6K_CONTROL_PKT_TAG);
5332 /* this interface is asynchronous, if there is an error, cleanup will happen in the
5333 * TX completion callback */
5334 HTCSendPkt(ar->arHtcTarget, &cookie->HtcPkt);
5338 if (status != A_OK) {
5339 A_NETBUF_FREE(osbuf);
5344 /* indicate tx activity or inactivity on a WMI stream */
5345 void ar6000_indicate_tx_activity(void *devt, u8 TrafficClass, bool Active)
5347 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
5348 HTC_ENDPOINT_ID eid ;
5351 if (ar->arWmiEnabled) {
5352 eid = arAc2EndpointID(ar, TrafficClass);
5354 AR6000_SPIN_LOCK(&ar->arLock, 0);
5356 ar->arAcStreamActive[TrafficClass] = Active;
5359 /* when a stream goes active, keep track of the active stream with the highest priority */
5361 if (ar->arAcStreamPriMap[TrafficClass] > ar->arHiAcStreamActivePri) {
5362 /* set the new highest active priority */
5363 ar->arHiAcStreamActivePri = ar->arAcStreamPriMap[TrafficClass];
5367 /* when a stream goes inactive, we may have to search for the next active stream
5368 * that is the highest priority */
5370 if (ar->arHiAcStreamActivePri == ar->arAcStreamPriMap[TrafficClass]) {
5372 /* the highest priority stream just went inactive */
5374 /* reset and search for the "next" highest "active" priority stream */
5375 ar->arHiAcStreamActivePri = 0;
5376 for (i = 0; i < WMM_NUM_AC; i++) {
5377 if (ar->arAcStreamActive[i]) {
5378 if (ar->arAcStreamPriMap[i] > ar->arHiAcStreamActivePri) {
5379 /* set the new highest active priority */
5380 ar->arHiAcStreamActivePri = ar->arAcStreamPriMap[i];
5387 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
5390 /* for mbox ping testing, the traffic class is mapped directly as a stream ID,
5391 * see handling of AR6000_XIOCTL_TRAFFIC_ACTIVITY_CHANGE in ioctl.c
5392 * convert the stream ID to a endpoint */
5393 eid = arAc2EndpointID(ar, TrafficClass);
5396 /* notify HTC, this may cause credit distribution changes */
5398 HTCIndicateActivityChange(ar->arHtcTarget,
5405 ar6000_btcoex_config_event(struct ar6_softc *ar, u8 *ptr, u32 len)
5408 WMI_BTCOEX_CONFIG_EVENT *pBtcoexConfig = (WMI_BTCOEX_CONFIG_EVENT *)ptr;
5409 WMI_BTCOEX_CONFIG_EVENT *pArbtcoexConfig =&ar->arBtcoexConfig;
5411 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 BTCOEX CONFIG EVENT \n"));
5413 A_PRINTF("received config event\n");
5414 pArbtcoexConfig->btProfileType = pBtcoexConfig->btProfileType;
5415 pArbtcoexConfig->linkId = pBtcoexConfig->linkId;
5417 switch (pBtcoexConfig->btProfileType) {
5418 case WMI_BTCOEX_BT_PROFILE_SCO:
5419 A_MEMCPY(&pArbtcoexConfig->info.scoConfigCmd, &pBtcoexConfig->info.scoConfigCmd,
5420 sizeof(WMI_SET_BTCOEX_SCO_CONFIG_CMD));
5422 case WMI_BTCOEX_BT_PROFILE_A2DP:
5423 A_MEMCPY(&pArbtcoexConfig->info.a2dpConfigCmd, &pBtcoexConfig->info.a2dpConfigCmd,
5424 sizeof(WMI_SET_BTCOEX_A2DP_CONFIG_CMD));
5426 case WMI_BTCOEX_BT_PROFILE_ACLCOEX:
5427 A_MEMCPY(&pArbtcoexConfig->info.aclcoexConfig, &pBtcoexConfig->info.aclcoexConfig,
5428 sizeof(WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD));
5430 case WMI_BTCOEX_BT_PROFILE_INQUIRY_PAGE:
5431 A_MEMCPY(&pArbtcoexConfig->info.btinquiryPageConfigCmd, &pBtcoexConfig->info.btinquiryPageConfigCmd,
5432 sizeof(WMI_SET_BTCOEX_ACLCOEX_CONFIG_CMD));
5435 if (ar->statsUpdatePending) {
5436 ar->statsUpdatePending = false;
5442 ar6000_btcoex_stats_event(struct ar6_softc *ar, u8 *ptr, u32 len)
5444 WMI_BTCOEX_STATS_EVENT *pBtcoexStats = (WMI_BTCOEX_STATS_EVENT *)ptr;
5446 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 BTCOEX CONFIG EVENT \n"));
5448 A_MEMCPY(&ar->arBtcoexStats, pBtcoexStats, sizeof(WMI_BTCOEX_STATS_EVENT));
5450 if (ar->statsUpdatePending) {
5451 ar->statsUpdatePending = false;
5456 module_init(ar6000_init_module);
5457 module_exit(ar6000_cleanup_module);
5459 /* Init cookie queue */
5461 ar6000_cookie_init(AR_SOFTC_T *ar)
5465 ar->arCookieList = NULL;
5466 ar->arCookieCount = 0;
5468 A_MEMZERO(s_ar_cookie_mem, sizeof(s_ar_cookie_mem));
5470 for (i = 0; i < MAX_COOKIE_NUM; i++) {
5471 ar6000_free_cookie(ar, &s_ar_cookie_mem[i]);
5475 /* cleanup cookie queue */
5477 ar6000_cookie_cleanup(AR_SOFTC_T *ar)
5479 /* It is gone .... */
5480 ar->arCookieList = NULL;
5481 ar->arCookieCount = 0;
5484 /* Init cookie queue */
5486 ar6000_free_cookie(AR_SOFTC_T *ar, struct ar_cookie * cookie)
5489 A_ASSERT(ar != NULL);
5490 A_ASSERT(cookie != NULL);
5492 cookie->arc_list_next = ar->arCookieList;
5493 ar->arCookieList = cookie;
5494 ar->arCookieCount++;
5497 /* cleanup cookie queue */
5498 static struct ar_cookie *
5499 ar6000_alloc_cookie(AR_SOFTC_T *ar)
5501 struct ar_cookie *cookie;
5503 cookie = ar->arCookieList;
5506 ar->arCookieList = cookie->arc_list_next;
5507 ar->arCookieCount--;
5513 #ifdef SEND_EVENT_TO_APP
5515 * This function is used to send event which come from taget to
5516 * the application. The buf which send to application is include
5517 * the event ID and event content.
5519 #define EVENT_ID_LEN 2
5520 void ar6000_send_event_to_app(AR_SOFTC_T *ar, u16 eventId,
5524 #if (WIRELESS_EXT >= 15)
5526 /* note: IWEVCUSTOM only exists in wireless extensions after version 15 */
5530 union iwreq_data wrqu;
5532 size = len + EVENT_ID_LEN;
5534 if (size > IW_CUSTOM_MAX) {
5535 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI event ID : 0x%4.4X, len = %d too big for IWEVCUSTOM (max=%d) \n",
5536 eventId, size, IW_CUSTOM_MAX));
5540 buf = A_MALLOC_NOWAIT(size);
5542 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: failed to allocate %d bytes\n", __func__, size));
5546 A_MEMZERO(buf, size);
5547 A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
5548 A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
5550 //AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("event ID = %d,len = %d\n",*(u16 *)buf, size));
5551 A_MEMZERO(&wrqu, sizeof(wrqu));
5552 wrqu.data.length = size;
5553 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
5561 * This function is used to send events larger than 256 bytes
5562 * to the application. The buf which is sent to application
5563 * includes the event ID and event content.
5565 void ar6000_send_generic_event_to_app(AR_SOFTC_T *ar, u16 eventId,
5569 #if (WIRELESS_EXT >= 18)
5571 /* IWEVGENIE exists in wireless extensions version 18 onwards */
5575 union iwreq_data wrqu;
5577 size = len + EVENT_ID_LEN;
5579 if (size > IW_GENERIC_IE_MAX) {
5580 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("WMI event ID : 0x%4.4X, len = %d too big for IWEVGENIE (max=%d) \n",
5581 eventId, size, IW_GENERIC_IE_MAX));
5585 buf = A_MALLOC_NOWAIT(size);
5587 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: failed to allocate %d bytes\n", __func__, size));
5591 A_MEMZERO(buf, size);
5592 A_MEMCPY(buf, &eventId, EVENT_ID_LEN);
5593 A_MEMCPY(buf+EVENT_ID_LEN, datap, len);
5595 A_MEMZERO(&wrqu, sizeof(wrqu));
5596 wrqu.data.length = size;
5597 wireless_send_event(ar->arNetDev, IWEVGENIE, &wrqu, buf);
5601 #endif /* (WIRELESS_EXT >= 18) */
5604 #endif /* SEND_EVENT_TO_APP */
5608 ar6000_tx_retry_err_event(void *devt)
5610 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Tx retries reach maximum!\n"));
5614 ar6000_snrThresholdEvent_rx(void *devt, WMI_SNR_THRESHOLD_VAL newThreshold, u8 snr)
5616 WMI_SNR_THRESHOLD_EVENT event;
5617 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
5619 event.range = newThreshold;
5622 ar6000_send_event_to_app(ar, WMI_SNR_THRESHOLD_EVENTID, (u8 *)&event,
5623 sizeof(WMI_SNR_THRESHOLD_EVENT));
5627 ar6000_lqThresholdEvent_rx(void *devt, WMI_LQ_THRESHOLD_VAL newThreshold, u8 lq)
5629 AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("lq threshold range %d, lq %d\n", newThreshold, lq));
5634 u32 a_copy_to_user(void *to, const void *from, u32 n)
5636 return(copy_to_user(to, from, n));
5639 u32 a_copy_from_user(void *to, const void *from, u32 n)
5641 return(copy_from_user(to, from, n));
5646 ar6000_get_driver_cfg(struct net_device *dev,
5655 case AR6000_DRIVER_CFG_GET_WLANNODECACHING:
5656 *((u32 *)result) = wlanNodeCaching;
5658 case AR6000_DRIVER_CFG_LOG_RAW_WMI_MSGS:
5659 *((u32 *)result) = logWmiRawMsgs;
5670 ar6000_keepalive_rx(void *devt, u8 configured)
5672 AR_SOFTC_T *ar = (AR_SOFTC_T *)devt;
5674 ar->arKeepaliveConfigured = configured;
5679 ar6000_pmkid_list_event(void *devt, u8 numPMKID, WMI_PMKID *pmkidList,
5684 A_PRINTF("Number of Cached PMKIDs is %d\n", numPMKID);
5686 for (i = 0; i < numPMKID; i++) {
5687 A_PRINTF("\nBSSID %d ", i);
5688 for (j = 0; j < ATH_MAC_LEN; j++) {
5689 A_PRINTF("%2.2x", bssidList[j]);
5691 bssidList += (ATH_MAC_LEN + WMI_PMKID_LEN);
5692 A_PRINTF("\nPMKID %d ", i);
5693 for (j = 0; j < WMI_PMKID_LEN; j++) {
5694 A_PRINTF("%2.2x", pmkidList->pmkid[j]);
5696 pmkidList = (WMI_PMKID *)((u8 *)pmkidList + ATH_MAC_LEN +
5701 void ar6000_pspoll_event(AR_SOFTC_T *ar,u8 aid)
5704 bool isPsqEmpty = false;
5706 conn = ieee80211_find_conn_for_aid(ar, aid);
5708 /* If the PS q for this STA is not empty, dequeue and send a pkt from
5709 * the head of the q. Also update the More data bit in the WMI_DATA_HDR
5710 * if there are more pkts for this STA in the PS q. If there are no more
5711 * pkts for this STA, update the PVB for this STA.
5713 A_MUTEX_LOCK(&conn->psqLock);
5714 isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq);
5715 A_MUTEX_UNLOCK(&conn->psqLock);
5718 /* TODO:No buffered pkts for this STA. Send out a NULL data frame */
5720 struct sk_buff *skb = NULL;
5722 A_MUTEX_LOCK(&conn->psqLock);
5723 skb = A_NETBUF_DEQUEUE(&conn->psq);
5724 A_MUTEX_UNLOCK(&conn->psqLock);
5725 /* Set the STA flag to PSPolled, so that the frame will go out */
5726 STA_SET_PS_POLLED(conn);
5727 ar6000_data_tx(skb, ar->arNetDev);
5728 STA_CLR_PS_POLLED(conn);
5730 /* Clear the PVB for this STA if the queue has become empty */
5731 A_MUTEX_LOCK(&conn->psqLock);
5732 isPsqEmpty = A_NETBUF_QUEUE_EMPTY(&conn->psq);
5733 A_MUTEX_UNLOCK(&conn->psqLock);
5736 wmi_set_pvb_cmd(ar->arWmi, conn->aid, 0);
5741 void ar6000_dtimexpiry_event(AR_SOFTC_T *ar)
5743 bool isMcastQueued = false;
5744 struct sk_buff *skb = NULL;
5746 /* If there are no associated STAs, ignore the DTIM expiry event.
5747 * There can be potential race conditions where the last associated
5748 * STA may disconnect & before the host could clear the 'Indicate DTIM'
5749 * request to the firmware, the firmware would have just indicated a DTIM
5750 * expiry event. The race is between 'clear DTIM expiry cmd' going
5751 * from the host to the firmware & the DTIM expiry event happening from
5752 * the firmware to the host.
5754 if (ar->sta_list_index == 0) {
5758 A_MUTEX_LOCK(&ar->mcastpsqLock);
5759 isMcastQueued = A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq);
5760 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
5762 A_ASSERT(isMcastQueued == false);
5764 /* Flush the mcast psq to the target */
5765 /* Set the STA flag to DTIMExpired, so that the frame will go out */
5766 ar->DTIMExpired = true;
5768 A_MUTEX_LOCK(&ar->mcastpsqLock);
5769 while (!A_NETBUF_QUEUE_EMPTY(&ar->mcastpsq)) {
5770 skb = A_NETBUF_DEQUEUE(&ar->mcastpsq);
5771 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
5773 ar6000_data_tx(skb, ar->arNetDev);
5775 A_MUTEX_LOCK(&ar->mcastpsqLock);
5777 A_MUTEX_UNLOCK(&ar->mcastpsqLock);
5779 /* Reset the DTIMExpired flag back to 0 */
5780 ar->DTIMExpired = false;
5782 /* Clear the LSB of the BitMapCtl field of the TIM IE */
5783 wmi_set_pvb_cmd(ar->arWmi, MCAST_AID, 0);
5787 read_rssi_compensation_param(AR_SOFTC_T *ar)
5791 //#define RSSICOMPENSATION_PRINT
5793 #ifdef RSSICOMPENSATION_PRINT
5795 cust_data_ptr = ar6000_get_cust_data_buffer(ar->arTargetType);
5796 for (i=0; i<16; i++) {
5797 A_PRINTF("cust_data_%d = %x \n", i, *(u8 *)cust_data_ptr);
5802 cust_data_ptr = ar6000_get_cust_data_buffer(ar->arTargetType);
5804 rssi_compensation_param.customerID = *(u16 *)cust_data_ptr & 0xffff;
5805 rssi_compensation_param.enable = *(u16 *)(cust_data_ptr+2) & 0xffff;
5806 rssi_compensation_param.bg_param_a = *(u16 *)(cust_data_ptr+4) & 0xffff;
5807 rssi_compensation_param.bg_param_b = *(u16 *)(cust_data_ptr+6) & 0xffff;
5808 rssi_compensation_param.a_param_a = *(u16 *)(cust_data_ptr+8) & 0xffff;
5809 rssi_compensation_param.a_param_b = *(u16 *)(cust_data_ptr+10) &0xffff;
5810 rssi_compensation_param.reserved = *(u32 *)(cust_data_ptr+12);
5812 #ifdef RSSICOMPENSATION_PRINT
5813 A_PRINTF("customerID = 0x%x \n", rssi_compensation_param.customerID);
5814 A_PRINTF("enable = 0x%x \n", rssi_compensation_param.enable);
5815 A_PRINTF("bg_param_a = 0x%x and %d \n", rssi_compensation_param.bg_param_a, rssi_compensation_param.bg_param_a);
5816 A_PRINTF("bg_param_b = 0x%x and %d \n", rssi_compensation_param.bg_param_b, rssi_compensation_param.bg_param_b);
5817 A_PRINTF("a_param_a = 0x%x and %d \n", rssi_compensation_param.a_param_a, rssi_compensation_param.a_param_a);
5818 A_PRINTF("a_param_b = 0x%x and %d \n", rssi_compensation_param.a_param_b, rssi_compensation_param.a_param_b);
5819 A_PRINTF("Last 4 bytes = 0x%x \n", rssi_compensation_param.reserved);
5822 if (rssi_compensation_param.enable != 0x1) {
5823 rssi_compensation_param.enable = 0;
5829 s32 rssi_compensation_calc_tcmd(u32 freq, s32 rssi, u32 totalPkt)
5834 if (rssi_compensation_param.enable)
5836 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n"));
5837 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d, totalPkt = %d\n", rssi,totalPkt));
5838 rssi = rssi * rssi_compensation_param.a_param_a + totalPkt * rssi_compensation_param.a_param_b;
5839 rssi = (rssi-50) /100;
5840 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi));
5845 if (rssi_compensation_param.enable)
5847 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n"));
5848 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d, totalPkt = %d\n", rssi,totalPkt));
5849 rssi = rssi * rssi_compensation_param.bg_param_a + totalPkt * rssi_compensation_param.bg_param_b;
5850 rssi = (rssi-50) /100;
5851 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi));
5858 s16 rssi_compensation_calc(AR_SOFTC_T *ar, s16 rssi)
5860 if (ar->arBssChannel > 5000)
5862 if (rssi_compensation_param.enable)
5864 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n"));
5865 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d\n", rssi));
5866 rssi = rssi * rssi_compensation_param.a_param_a + rssi_compensation_param.a_param_b;
5867 rssi = (rssi-50) /100;
5868 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi));
5873 if (rssi_compensation_param.enable)
5875 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n"));
5876 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before compensation = %d\n", rssi));
5877 rssi = rssi * rssi_compensation_param.bg_param_a + rssi_compensation_param.bg_param_b;
5878 rssi = (rssi-50) /100;
5879 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after compensation = %d\n", rssi));
5886 s16 rssi_compensation_reverse_calc(AR_SOFTC_T *ar, s16 rssi, bool Above)
5890 if (ar->arBssChannel > 5000)
5892 if (rssi_compensation_param.enable)
5894 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11a\n"));
5895 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before rev compensation = %d\n", rssi));
5897 rssi = (rssi - rssi_compensation_param.a_param_b) / rssi_compensation_param.a_param_a;
5898 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after rev compensation = %d\n", rssi));
5903 if (rssi_compensation_param.enable)
5905 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (">>> 11bg\n"));
5906 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi before rev compensation = %d\n", rssi));
5909 for (i=95; i>=0; i--) {
5910 if (rssi <= rssi_compensation_table[i]) {
5916 for (i=0; i<=95; i++) {
5917 if (rssi >= rssi_compensation_table[i]) {
5923 AR_DEBUG_PRINTF(ATH_DEBUG_INFO, ("rssi after rev compensation = %d\n", rssi));
5931 void ap_wapi_rekey_event(AR_SOFTC_T *ar, u8 type, u8 *mac)
5933 union iwreq_data wrqu;
5936 A_MEMZERO(buf, sizeof(buf));
5938 strcpy(buf, "WAPI_REKEY");
5940 A_MEMCPY(&buf[11], mac, ATH_MAC_LEN);
5942 A_MEMZERO(&wrqu, sizeof(wrqu));
5943 wrqu.data.length = 10+1+ATH_MAC_LEN;
5944 wireless_send_event(ar->arNetDev, IWEVCUSTOM, &wrqu, buf);
5946 A_PRINTF("WAPI REKEY - %d - %02x:%02x\n", type, mac[4], mac[5]);
5953 ar6000_reinstall_keys(AR_SOFTC_T *ar, u8 key_op_ctrl)
5956 struct ieee80211req_key *uik = &ar->user_saved_keys.ucast_ik;
5957 struct ieee80211req_key *bik = &ar->user_saved_keys.bcast_ik;
5958 CRYPTO_TYPE keyType = ar->user_saved_keys.keyType;
5960 if (IEEE80211_CIPHER_CCKM_KRK != uik->ik_type) {
5961 if (NONE_CRYPT == keyType) {
5962 goto _reinstall_keys_out;
5965 if (uik->ik_keylen) {
5966 status = wmi_addKey_cmd(ar->arWmi, uik->ik_keyix,
5967 ar->user_saved_keys.keyType, PAIRWISE_USAGE,
5968 uik->ik_keylen, (u8 *)&uik->ik_keyrsc,
5969 uik->ik_keydata, key_op_ctrl, uik->ik_macaddr, SYNC_BEFORE_WMIFLAG);
5973 status = wmi_add_krk_cmd(ar->arWmi, uik->ik_keydata);
5976 if (IEEE80211_CIPHER_CCKM_KRK != bik->ik_type) {
5977 if (NONE_CRYPT == keyType) {
5978 goto _reinstall_keys_out;
5981 if (bik->ik_keylen) {
5982 status = wmi_addKey_cmd(ar->arWmi, bik->ik_keyix,
5983 ar->user_saved_keys.keyType, GROUP_USAGE,
5984 bik->ik_keylen, (u8 *)&bik->ik_keyrsc,
5985 bik->ik_keydata, key_op_ctrl, bik->ik_macaddr, NO_SYNC_WMIFLAG);
5988 status = wmi_add_krk_cmd(ar->arWmi, bik->ik_keydata);
5991 _reinstall_keys_out:
5992 ar->user_savedkeys_stat = USER_SAVEDKEYS_STAT_INIT;
5993 ar->user_key_ctrl = 0;
5997 #endif /* USER_KEYS */
6001 ar6000_dset_open_req(
6019 ar6000_dset_data_req(
6031 ar6000_ap_mode_profile_commit(struct ar6_softc *ar)
6034 unsigned long flags;
6036 /* No change in AP's profile configuration */
6037 if(ar->ap_profile_flag==0) {
6038 A_PRINTF("COMMIT: No change in profile!!!\n");
6042 if(!ar->arSsidLen) {
6043 A_PRINTF("SSID not set!!!\n");
6047 switch(ar->arAuthMode) {
6049 if((ar->arPairwiseCrypto != NONE_CRYPT) &&
6051 (ar->arPairwiseCrypto != WAPI_CRYPT) &&
6053 (ar->arPairwiseCrypto != WEP_CRYPT)) {
6054 A_PRINTF("Cipher not supported in AP mode Open auth\n");
6060 case (WPA_PSK_AUTH|WPA2_PSK_AUTH):
6063 A_PRINTF("This key mgmt type not supported in AP mode\n");
6067 /* Update the arNetworkType */
6068 ar->arNetworkType = ar->arNextMode;
6070 A_MEMZERO(&p,sizeof(p));
6071 p.ssidLength = ar->arSsidLen;
6072 A_MEMCPY(p.ssid,ar->arSsid,p.ssidLength);
6073 p.channel = ar->arChannelHint;
6074 p.networkType = ar->arNetworkType;
6076 p.dot11AuthMode = ar->arDot11AuthMode;
6077 p.authMode = ar->arAuthMode;
6078 p.pairwiseCryptoType = ar->arPairwiseCrypto;
6079 p.pairwiseCryptoLen = ar->arPairwiseCryptoLen;
6080 p.groupCryptoType = ar->arGroupCrypto;
6081 p.groupCryptoLen = ar->arGroupCryptoLen;
6082 p.ctrl_flags = ar->arConnectCtrlFlags;
6084 ar->arConnected = false;
6086 wmi_ap_profile_commit(ar->arWmi, &p);
6087 spin_lock_irqsave(&ar->arLock, flags);
6088 ar->arConnected = true;
6089 netif_carrier_on(ar->arNetDev);
6090 spin_unlock_irqrestore(&ar->arLock, flags);
6091 ar->ap_profile_flag = 0;
6096 ar6000_connect_to_ap(struct ar6_softc *ar)
6098 /* The ssid length check prevents second "essid off" from the user,
6099 to be treated as a connect cmd. The second "essid off" is ignored.
6101 if((ar->arWmiReady == true) && (ar->arSsidLen > 0) && ar->arNetworkType!=AP_NETWORK)
6104 if((ADHOC_NETWORK != ar->arNetworkType) &&
6105 (NONE_AUTH==ar->arAuthMode) &&
6106 (WEP_CRYPT==ar->arPairwiseCrypto)) {
6107 ar6000_install_static_wep_keys(ar);
6110 if (!ar->arUserBssFilter) {
6111 if (wmi_bssfilter_cmd(ar->arWmi, ALL_BSS_FILTER, 0) != A_OK) {
6116 if (ar->arWapiEnable) {
6117 ar->arPairwiseCrypto = WAPI_CRYPT;
6118 ar->arPairwiseCryptoLen = 0;
6119 ar->arGroupCrypto = WAPI_CRYPT;
6120 ar->arGroupCryptoLen = 0;
6121 ar->arAuthMode = NONE_AUTH;
6122 ar->arConnectCtrlFlags |= CONNECT_IGNORE_WPAx_GROUP_CIPHER;
6125 AR_DEBUG_PRINTF(ATH_DEBUG_WLAN_CONNECT,("Connect called with authmode %d dot11 auth %d"\
6126 " PW crypto %d PW crypto Len %d GRP crypto %d"\
6127 " GRP crypto Len %d\n",
6128 ar->arAuthMode, ar->arDot11AuthMode,
6129 ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
6130 ar->arGroupCrypto, ar->arGroupCryptoLen));
6132 /* Set the listen interval into 1000TUs or more. This value will be indicated to Ap in the conn.
6133 later set it back locally at the STA to 100/1000 TUs depending on the power mode */
6134 if ((ar->arNetworkType == INFRA_NETWORK)) {
6135 wmi_listeninterval_cmd(ar->arWmi, max(ar->arListenIntervalT, (u16)A_MAX_WOW_LISTEN_INTERVAL), 0);
6137 status = wmi_connect_cmd(ar->arWmi, ar->arNetworkType,
6138 ar->arDot11AuthMode, ar->arAuthMode,
6139 ar->arPairwiseCrypto, ar->arPairwiseCryptoLen,
6140 ar->arGroupCrypto,ar->arGroupCryptoLen,
6141 ar->arSsidLen, ar->arSsid,
6142 ar->arReqBssid, ar->arChannelHint,
6143 ar->arConnectCtrlFlags);
6144 if (status != A_OK) {
6145 wmi_listeninterval_cmd(ar->arWmi, ar->arListenIntervalT, ar->arListenIntervalB);
6146 if (!ar->arUserBssFilter) {
6147 wmi_bssfilter_cmd(ar->arWmi, NONE_BSS_FILTER, 0);
6152 if ((!(ar->arConnectCtrlFlags & CONNECT_DO_WPA_OFFLOAD)) &&
6153 ((WPA_PSK_AUTH == ar->arAuthMode) || (WPA2_PSK_AUTH == ar->arAuthMode)))
6155 A_TIMEOUT_MS(&ar->disconnect_timer, A_DISCONNECT_TIMER_INTERVAL, 0);
6158 ar->arConnectCtrlFlags &= ~CONNECT_DO_WPA_OFFLOAD;
6160 ar->arConnectPending = true;
6167 ar6000_ap_mode_get_wpa_ie(struct ar6_softc *ar, struct ieee80211req_wpaie *wpaie)
6170 conn = ieee80211_find_conn(ar, wpaie->wpa_macaddr);
6172 A_MEMZERO(wpaie->wpa_ie, IEEE80211_MAX_IE);
6173 A_MEMZERO(wpaie->rsn_ie, IEEE80211_MAX_IE);
6176 A_MEMCPY(wpaie->wpa_ie, conn->wpa_ie, IEEE80211_MAX_IE);
6183 is_iwioctl_allowed(u8 mode, u16 cmd)
6185 if(cmd >= SIOCSIWCOMMIT && cmd <= SIOCGIWPOWER) {
6186 cmd -= SIOCSIWCOMMIT;
6187 if(sioctl_filter[cmd] == 0xFF) return A_OK;
6188 if(sioctl_filter[cmd] & mode) return A_OK;
6189 } else if(cmd >= SIOCIWFIRSTPRIV && cmd <= (SIOCIWFIRSTPRIV+30)) {
6190 cmd -= SIOCIWFIRSTPRIV;
6191 if(pioctl_filter[cmd] == 0xFF) return A_OK;
6192 if(pioctl_filter[cmd] & mode) return A_OK;
6200 is_xioctl_allowed(u8 mode, int cmd)
6202 if(sizeof(xioctl_filter)-1 < cmd) {
6203 A_PRINTF("Filter for this cmd=%d not defined\n",cmd);
6206 if(xioctl_filter[cmd] == 0xFF) return A_OK;
6207 if(xioctl_filter[cmd] & mode) return A_OK;
6213 ap_set_wapi_key(struct ar6_softc *ar, void *ikey)
6215 struct ieee80211req_key *ik = (struct ieee80211req_key *)ikey;
6216 KEY_USAGE keyUsage = 0;
6219 if (A_MEMCMP(ik->ik_macaddr, bcast_mac, IEEE80211_ADDR_LEN) == 0) {
6220 keyUsage = GROUP_USAGE;
6222 keyUsage = PAIRWISE_USAGE;
6224 A_PRINTF("WAPI_KEY: Type:%d ix:%d mac:%02x:%02x len:%d\n",
6225 keyUsage, ik->ik_keyix, ik->ik_macaddr[4], ik->ik_macaddr[5],
6228 status = wmi_addKey_cmd(ar->arWmi, ik->ik_keyix, WAPI_CRYPT, keyUsage,
6229 ik->ik_keylen, (u8 *)&ik->ik_keyrsc,
6230 ik->ik_keydata, KEY_OP_INIT_VAL, ik->ik_macaddr,
6233 if (A_OK != status) {
6240 void ar6000_peer_event(
6247 for (pos=0;pos<6;pos++)
6248 printk("%02x: ",*(macAddr+pos));
6252 #ifdef HTC_TEST_SEND_PKTS
6253 #define HTC_TEST_DUPLICATE 8
6254 static void DoHTCSendPktsTest(AR_SOFTC_T *ar, int MapNo, HTC_ENDPOINT_ID eid, struct sk_buff *dupskb)
6256 struct ar_cookie *cookie;
6257 struct ar_cookie *cookieArray[HTC_TEST_DUPLICATE];
6258 struct sk_buff *new_skb;
6261 HTC_PACKET_QUEUE pktQueue;
6262 EPPING_HEADER *eppingHdr;
6264 eppingHdr = A_NETBUF_DATA(dupskb);
6266 if (eppingHdr->Cmd_h == EPPING_CMD_NO_ECHO) {
6267 /* skip test if this is already a tx perf test */
6271 for (i = 0; i < HTC_TEST_DUPLICATE; i++,pkts++) {
6272 AR6000_SPIN_LOCK(&ar->arLock, 0);
6273 cookie = ar6000_alloc_cookie(ar);
6274 if (cookie != NULL) {
6275 ar->arTxPending[eid]++;
6276 ar->arTotalTxDataPending++;
6279 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
6281 if (NULL == cookie) {
6285 new_skb = A_NETBUF_ALLOC(A_NETBUF_LEN(dupskb));
6287 if (new_skb == NULL) {
6288 AR6000_SPIN_LOCK(&ar->arLock, 0);
6289 ar6000_free_cookie(ar,cookie);
6290 AR6000_SPIN_UNLOCK(&ar->arLock, 0);
6294 A_NETBUF_PUT_DATA(new_skb, A_NETBUF_DATA(dupskb), A_NETBUF_LEN(dupskb));
6295 cookie->arc_bp[0] = (unsigned long)new_skb;
6296 cookie->arc_bp[1] = MapNo;
6297 SET_HTC_PACKET_INFO_TX(&cookie->HtcPkt,
6299 A_NETBUF_DATA(new_skb),
6300 A_NETBUF_LEN(new_skb),
6304 cookieArray[i] = cookie;
6307 EPPING_HEADER *pHdr = (EPPING_HEADER *)A_NETBUF_DATA(new_skb);
6308 pHdr->Cmd_h = EPPING_CMD_NO_ECHO; /* do not echo the packet */
6316 INIT_HTC_PACKET_QUEUE(&pktQueue);
6318 for (i = 0; i < pkts; i++) {
6319 HTC_PACKET_ENQUEUE(&pktQueue,&cookieArray[i]->HtcPkt);
6322 HTCSendPktsMultiple(ar->arHtcTarget, &pktQueue);
6327 #ifdef CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT
6329 * Add support for adding and removing a virtual adapter for soft AP.
6330 * Some OS requires different adapters names for station and soft AP mode.
6331 * To support these requirement, create and destory a netdevice instance
6332 * when the AP mode is operational. A full fledged support for virual device
6333 * is not implemented. Rather a virtual interface is created and is linked
6334 * with the existing physical device instance during the operation of the
6338 int ar6000_start_ap_interface(AR_SOFTC_T *ar)
6340 AR_VIRTUAL_INTERFACE_T *arApDev;
6342 /* Change net_device to point to AP instance */
6343 arApDev = (AR_VIRTUAL_INTERFACE_T *)ar->arApDev;
6344 ar->arNetDev = arApDev->arNetDev;
6349 int ar6000_stop_ap_interface(AR_SOFTC_T *ar)
6351 AR_VIRTUAL_INTERFACE_T *arApDev;
6353 /* Change net_device to point to sta instance */
6354 arApDev = (AR_VIRTUAL_INTERFACE_T *)ar->arApDev;
6356 ar->arNetDev = arApDev->arStaNetDev;
6363 int ar6000_create_ap_interface(AR_SOFTC_T *ar, char *ap_ifname)
6365 struct net_device *dev;
6366 AR_VIRTUAL_INTERFACE_T *arApDev;
6368 dev = alloc_etherdev(sizeof(AR_VIRTUAL_INTERFACE_T));
6370 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: can't alloc etherdev\n"));
6375 init_netdev(dev, ap_ifname);
6377 if (register_netdev(dev)) {
6378 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_create_ap_interface: register_netdev failed\n"));
6382 arApDev = netdev_priv(dev);
6383 arApDev->arDev = ar;
6384 arApDev->arNetDev = dev;
6385 arApDev->arStaNetDev = ar->arNetDev;
6387 ar->arApDev = arApDev;
6390 /* Copy the MAC address */
6391 A_MEMCPY(dev->dev_addr, ar->arNetDev->dev_addr, AR6000_ETH_ADDR_LEN);
6396 int ar6000_add_ap_interface(AR_SOFTC_T *ar, char *ap_ifname)
6398 /* Interface already added, need not proceed further */
6399 if (ar->arApDev != NULL) {
6400 AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("ar6000_add_ap_interface: interface already present \n"));
6404 if (ar6000_create_ap_interface(ar, ap_ifname) != A_OK) {
6408 A_PRINTF("Add AP interface %s \n",ap_ifname);
6410 return ar6000_start_ap_interface(ar);
6413 int ar6000_remove_ap_interface(AR_SOFTC_T *ar)
6416 ar6000_stop_ap_interface(ar);
6418 unregister_netdev(arApNetDev);
6419 free_netdev(apApNetDev);
6421 A_PRINTF("Remove AP interface\n");
6429 #endif /* CONFIG_AP_VIRTUAL_ADAPTER_SUPPORT */
6432 #ifdef EXPORT_HCI_BRIDGE_INTERFACE
6433 EXPORT_SYMBOL(setupbtdev);