2 tristate "Data acquisition support (comedi)"
5 depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
7 Enable support a wide range of data acquisition devices
11 bool "Comedi debugging"
12 depends on COMEDI != n
14 This is an option for use by developers; most people should
15 say N here. This enables comedi core and driver debugging.
17 menuconfig COMEDI_MISC_DRIVERS
18 tristate "Comedi misc drivers"
22 Enable comedi misc drivers to be built
24 Note that the answer to this question won't directly affect the
25 kernel: saying N will just cause the configurator to skip all
26 the questions about misc non-hardware comedi drivers.
28 if COMEDI_MISC_DRIVERS
30 config COMEDI_KCOMEDILIB
31 tristate "Comedi kcomedilib"
36 tristate "Device bonding support"
37 depends on COMEDI_KCOMEDILIB
40 Enable support for a driver to 'bond' (merge) multiple subdevices
41 from multiple devices together as one.
43 To compile this driver as a module, choose M here: the module will be
47 tristate "Fake waveform generator support"
51 Enable support for the fake waveform generator.
52 This driver is mainly for testing purposes, but can also be used to
53 generate sample waveforms on systems that don't have data acquisition
56 To compile this driver as a module, choose M here: the module will be
60 tristate "Parallel port support"
63 Enable support for the standard parallel port.
64 A cheap and easy way to get a few more digital I/O lines. Steal
65 additional parallel ports from old computers or your neighbors'
68 To compile this driver as a module, choose M here: the module will be
69 called comedi_parport.
71 config COMEDI_SERIAL2002
72 tristate "Driver for serial connected hardware"
75 Enable support for serial connected hardware
77 To compile this driver as a module, choose M here: the module will be
81 tristate "Comedi skeleton driver"
84 Build the Skeleton driver, an example for driver writers
86 To compile this driver as a module, choose M here: the module will be
89 endif # COMEDI_MISC_DRIVERS
91 menuconfig COMEDI_ISA_DRIVERS
92 tristate "Comedi ISA and PC/104 drivers"
93 depends on COMEDI && ISA
96 Enable comedi ISA and PC/104 drivers to be built
98 Note that the answer to this question won't directly affect the
99 kernel: saying N will just cause the configurator to skip all
100 the questions about ISA and PC/104 comedi drivers.
102 if COMEDI_ISA_DRIVERS && ISA
104 config COMEDI_ACL7225B
105 tristate "ADlink NuDAQ ACL-7225b and compatibles support"
108 Enable support for ADlink NuDAQ ACL-7225b and compatibles,
109 ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
111 To compile this driver as a module, choose M here: the module will be
115 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
118 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
120 To compile this driver as a module, choose M here: the module will be
124 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
128 Enable support for Advantech PCL-724, PCL-722, PCL-731 and
129 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
131 To compile this driver as a module, choose M here: the module will be
135 tristate "Advantech PCL-725 and compatible ISA card support"
138 Enable support for Advantech PCL-725 and compatible ISA cards.
140 To compile this driver as a module, choose M here: the module will be
144 tristate "Advantech PCL-726 and compatible ISA card support"
147 Enable support for Advantech PCL-726 and compatible ISA cards.
149 To compile this driver as a module, choose M here: the module will be
153 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
156 Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
159 To compile this driver as a module, choose M here: the module will be
163 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
164 depends on VIRT_TO_BUS
167 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
168 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
169 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
171 To compile this driver as a module, choose M here: the module will be
175 tristate "Advantech PCL-814 and PCL-816 ISA card support"
176 depends on VIRT_TO_BUS
179 Enable support for Advantech PCL-814 and PCL-816 ISA cards
181 To compile this driver as a module, choose M here: the module will be
185 tristate "Advantech PCL-718 and PCL-818 ISA card support"
186 depends on VIRT_TO_BUS
189 Enable support for Advantech PCL-818 ISA cards
190 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
192 To compile this driver as a module, choose M here: the module will be
195 config COMEDI_PCM3724
196 tristate "Advantech PCM-3724 PC/104 card support"
200 Enable support for Advantech PCM-3724 PC/104 cards.
202 To compile this driver as a module, choose M here: the module will be
205 config COMEDI_PCM3730
206 tristate "Advantech PCM-3730 and clone PC/104 board support"
209 Enable support for Advantech PCM-3730 and clone PC/104 boards
211 To compile this driver as a module, choose M here: the module will be
215 tristate "Analog Devices RTI-800/815 ISA card support"
218 Enable support for Analog Devices RTI-800/815 ISA cards
220 To compile this driver as a module, choose M here: the module will be
224 tristate "Analog Devices RTI-802 ISA card support"
227 Enable support for Analog Devices RTI-802 ISA cards
229 To compile this driver as a module, choose M here: the module will be
232 config COMEDI_DAS16M1
233 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
238 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
240 To compile this driver as a module, choose M here: the module will be
244 tristate "DAS-16 compatible ISA and PC/104 card support"
249 Enable support for Keithley Metrabyte/ComputerBoards DAS16
250 and compatible ISA and PC/104 cards:
251 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
252 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
253 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
254 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
255 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
256 CIO-DAS1602/16, CIO-DAS16/330
258 To compile this driver as a module, choose M here: the module will be
262 tristate "DAS800 and compatible ISA card support"
266 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
267 Keithley Metrabyte DAS-800, DAS-801, DAS-802
268 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
271 To compile this driver as a module, choose M here: the module will be
274 config COMEDI_DAS1800
275 tristate "DAS1800 and compatible ISA card support"
276 depends on VIRT_TO_BUS
280 Enable support for DAS1800 and compatible ISA cards
281 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
282 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
283 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
284 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
287 To compile this driver as a module, choose M here: the module will be
290 config COMEDI_DAS6402
291 tristate "DAS6402 and compatible ISA card support"
294 Enable support for DAS6402 and compatible ISA cards
295 Computerboards, Keithley Metrabyte DAS6402 and compatibles
297 To compile this driver as a module, choose M here: the module will be
301 tristate "Data Translation DT2801 ISA card support"
304 Enable support for Data Translation DT2801 ISA cards
306 To compile this driver as a module, choose M here: the module will be
310 tristate "Data Translation DT2811 ISA card support"
313 Enable support for Data Translation DT2811 ISA cards
315 To compile this driver as a module, choose M here: the module will be
319 tristate "Data Translation DT2814 ISA card support"
322 Enable support for Data Translation DT2814 ISA cards
324 To compile this driver as a module, choose M here: the module will be
328 tristate "Data Translation DT2815 ISA card support"
331 Enable support for Data Translation DT2815 ISA cards
333 To compile this driver as a module, choose M here: the module will be
337 tristate "Data Translation DT2817 ISA card support"
340 Enable support for Data Translation DT2817 ISA cards
342 To compile this driver as a module, choose M here: the module will be
346 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
348 depends on VIRT_TO_BUS
351 Enable support for Data Translation DT2821 series including DT-EZ
352 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
353 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
354 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
356 To compile this driver as a module, choose M here: the module will be
359 config COMEDI_DMM32AT
360 tristate "Diamond Systems MM-32-AT PC/104 board support"
363 Enable support for Diamond Systems MM-32-AT PC/104 boards
365 To compile this driver as a module, choose M here: the module will be
369 tristate "FL512 ISA card support"
372 Enable support for FL512 ISA card
374 To compile this driver as a module, choose M here: the module will be
377 config COMEDI_AIO_AIO12_8
378 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
382 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
384 To compile this driver as a module, choose M here: the module will be
387 config COMEDI_AIO_IIRO_16
388 tristate "I/O Products PC/104 IIRO16 Board support"
391 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
394 To compile this driver as a module, choose M here: the module will be
397 config COMEDI_C6XDIGIO
398 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
401 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
404 To compile this driver as a module, choose M here: the module will be
408 tristate "Micro/sys MPC-624 PC/104 board support"
411 Enable support for Micro/sys MPC-624 PC/104 board
413 To compile this driver as a module, choose M here: the module will be
417 tristate "MicroAxial ADQ12-B data acquisition and control card support"
420 Enable MicroAxial ADQ12-B daq and control card support.
422 To compile this driver as a module, choose M here: the module will be
425 config COMEDI_NI_AT_A2150
426 tristate "NI AT-A2150 ISA card support"
427 depends on COMEDI_NI_COMMON
428 depends on VIRT_TO_BUS
431 Enable support for National Instruments AT-A2150 cards
433 To compile this driver as a module, choose M here: the module will be
436 config COMEDI_NI_AT_AO
437 tristate "NI AT-AO-6/10 EISA card support"
438 depends on COMEDI_NI_COMMON
441 Enable support for National Instruments AT-AO-6/10 cards
443 To compile this driver as a module, choose M here: the module will be
446 config COMEDI_NI_ATMIO
447 tristate "NI AT-MIO E series ISA-PNP card support"
448 depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON
452 Enable support for National Instruments AT-MIO E series cards
453 National Instruments AT-MIO-16E-1 (ni_atmio),
454 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
455 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
457 To compile this driver as a module, choose M here: the module will be
460 config COMEDI_NI_ATMIO16D
461 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
462 depends on ISAPNP && COMEDI_NI_COMMON
466 Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
468 To compile this driver as a module, choose M here: the module will be
472 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
475 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
477 To compile this driver as a module, choose M here: the module will be
480 config COMEDI_PCMDA12
481 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
484 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
485 Note that the board is not ISA-PNP capable and thus needs the I/O
486 port comedi_config parameter.
488 To compile this driver as a module, choose M here: the module will be
492 tristate "Winsystems PCM-MIO PC/104 board support"
495 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
497 To compile this driver as a module, choose M here: the module will be
501 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
504 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
506 To compile this driver as a module, choose M here: the module will be
509 config COMEDI_MULTIQ3
510 tristate "Quanser Consulting MultiQ-3 ISA card support"
513 Enable support for Quanser Consulting MultiQ-3 ISA cards
515 To compile this driver as a module, choose M here: the module will be
519 tristate "Generic driver for very simple devices"
522 Enable generic support for very simple / POC (Piece of Crap) boards,
523 Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
526 To compile this driver as a module, choose M here: the module will be
529 endif # COMEDI_ISA_DRIVERS
531 menuconfig COMEDI_PCI_DRIVERS
532 tristate "Comedi PCI drivers"
533 depends on COMEDI && PCI
536 Enable comedi PCI drivers to be built
538 Note that the answer to this question won't directly affect the
539 kernel: saying N will just cause the configurator to skip all
540 the questions about PCI comedi drivers.
542 if COMEDI_PCI_DRIVERS && PCI
544 config COMEDI_ADDI_APCI_035
545 tristate "ADDI-DATA APCI_035 support"
546 depends on VIRT_TO_BUS
549 Enable support for ADDI-DATA APCI_035 cards
551 To compile this driver as a module, choose M here: the module will be
552 called addi_apci_035.
554 config COMEDI_ADDI_APCI_1032
555 tristate "ADDI-DATA APCI_1032 support"
556 depends on VIRT_TO_BUS
559 Enable support for ADDI-DATA APCI_1032 cards
561 To compile this driver as a module, choose M here: the module will be
562 called addi_apci_1032.
564 config COMEDI_ADDI_APCI_1500
565 tristate "ADDI-DATA APCI_1500 support"
566 depends on VIRT_TO_BUS
569 Enable support for ADDI-DATA APCI_1500 cards
571 To compile this driver as a module, choose M here: the module will be
572 called addi_apci_1500.
574 config COMEDI_ADDI_APCI_1516
575 tristate "ADDI-DATA APCI_1516 support"
576 depends on VIRT_TO_BUS
579 Enable support for ADDI-DATA APCI_1516 cards
581 To compile this driver as a module, choose M here: the module will be
582 called addi_apci_1516.
584 config COMEDI_ADDI_APCI_1564
585 tristate "ADDI-DATA APCI_1564 support"
586 depends on VIRT_TO_BUS
589 Enable support for ADDI-DATA APCI_1564 cards
591 To compile this driver as a module, choose M here: the module will be
592 called addi_apci_1564.
594 config COMEDI_ADDI_APCI_16XX
595 tristate "ADDI-DATA APCI_16xx support"
596 depends on VIRT_TO_BUS
599 Enable support for ADDI-DATA APCI_16xx cards
601 To compile this driver as a module, choose M here: the module will be
602 called addi_apci_16xx.
604 config COMEDI_ADDI_APCI_2016
605 tristate "ADDI-DATA APCI_2016 support"
606 depends on VIRT_TO_BUS
609 Enable support for ADDI-DATA APCI_2016 cards
611 To compile this driver as a module, choose M here: the module will be
612 called addi_apci_2016.
614 config COMEDI_ADDI_APCI_2032
615 tristate "ADDI-DATA APCI_2032 support"
616 depends on VIRT_TO_BUS
619 Enable support for ADDI-DATA APCI_2032 cards
621 To compile this driver as a module, choose M here: the module will be
622 called addi_apci_2032.
624 config COMEDI_ADDI_APCI_2200
625 tristate "ADDI-DATA APCI_2200 support"
626 depends on VIRT_TO_BUS
629 Enable support for ADDI-DATA APCI_2200 cards
631 To compile this driver as a module, choose M here: the module will be
632 called addi_apci_2200.
634 config COMEDI_ADDI_APCI_3001
635 tristate "ADDI-DATA APCI_3001 support"
636 depends on VIRT_TO_BUS
640 Enable support for ADDI-DATA APCI_3001 cards
642 To compile this driver as a module, choose M here: the module will be
643 called addi_apci_3001.
645 config COMEDI_ADDI_APCI_3120
646 tristate "ADDI-DATA APCI_3520 support"
647 depends on VIRT_TO_BUS
651 Enable support for ADDI-DATA APCI_3520 cards
653 To compile this driver as a module, choose M here: the module will be
654 called addi_apci_3120.
656 config COMEDI_ADDI_APCI_3501
657 tristate "ADDI-DATA APCI_3501 support"
658 depends on VIRT_TO_BUS
661 Enable support for ADDI-DATA APCI_3501 cards
663 To compile this driver as a module, choose M here: the module will be
664 called addi_apci_3501.
666 config COMEDI_ADDI_APCI_3XXX
667 tristate "ADDI-DATA APCI_3xxx support"
668 depends on VIRT_TO_BUS
671 Enable support for ADDI-DATA APCI_3xxx cards
673 To compile this driver as a module, choose M here: the module will be
674 called addi_apci_3xxx.
676 config COMEDI_ADL_PCI6208
677 tristate "ADLink PCI-6208A support"
681 Enable support for ADLink PCI-6208A cards
683 To compile this driver as a module, choose M here: the module will be
686 config COMEDI_ADL_PCI7230
687 tristate "ADLink PCI-7230 digital io board support"
690 Enable support for ADlink PCI-7230 digital io board support
692 To compile this driver as a module, choose M here: the module will be
695 config COMEDI_ADL_PCI7296
696 tristate "ADLink PCI-7296 96 ch. digital io board support"
699 Enable support for ADlink PCI-7296 96 ch. digital io board support
701 To compile this driver as a module, choose M here: the module will be
704 config COMEDI_ADL_PCI7432
705 tristate "ADLink PCI-7432 64 ch. isolated digital io board support"
708 Enable support for ADlink PCI-7432 64 ch. isolated digital io board
710 To compile this driver as a module, choose M here: the module will be
713 config COMEDI_ADL_PCI8164
714 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
717 Enable support for ADlink PCI-8164 4 Axes Motion Control board
719 To compile this driver as a module, choose M here: the module will be
722 config COMEDI_ADL_PCI9111
723 tristate "ADLink PCI-9111HR support"
727 Enable support for ADlink PCI9111 cards
729 To compile this driver as a module, choose M here: the module will be
732 config COMEDI_ADL_PCI9118
733 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
735 depends on VIRT_TO_BUS
738 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
740 To compile this driver as a module, choose M here: the module will be
743 config COMEDI_ADV_PCI1710
744 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
747 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
748 PCI-1713, PCI-1720 and PCI-1731
750 To compile this driver as a module, choose M here: the module will be
753 config COMEDI_ADV_PCI1723
754 tristate "Advantech PCI-1723 support"
757 Enable support for Advantech PCI-1723 cards
759 To compile this driver as a module, choose M here: the module will be
762 config COMEDI_ADV_PCI_DIO
763 tristate "Advantech PCI DIO card support"
767 Enable support for Advantech PCI DIO cards
768 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
769 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
770 PCI-1760 and PCI-1762
772 To compile this driver as a module, choose M here: the module will be
775 config COMEDI_AMPLC_DIO200
776 tristate "Amplicon PC272E and PCI272 DIO board support"
780 Enable support for Amplicon PC272E and PCI272 DIO boards
782 To compile this driver as a module, choose M here: the module will be
785 config COMEDI_AMPLC_PC236
786 tristate "Amplicon PC36AT and PCI236 DIO board support"
790 Enable support for Amplicon PC36AT and PCI236 DIO boards
792 To compile this driver as a module, choose M here: the module will be
795 config COMEDI_AMPLC_PC263
796 tristate "Amplicon PC263 and PCI263 relay board support"
799 Enable support for Amplicon PC263 and PCI263 relay boards
801 To compile this driver as a module, choose M here: the module will be
804 config COMEDI_AMPLC_PCI224
805 tristate "Amplicon PCI224 and PCI234 support"
809 Enable support for Amplicon PCI224 and PCI234 AO boards
811 To compile this driver as a module, choose M here: the module will be
814 config COMEDI_AMPLC_PCI230
815 tristate "Amplicon PCI230 and PCI260 support"
819 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
822 To compile this driver as a module, choose M here: the module will be
825 config COMEDI_CONTEC_PCI_DIO
826 tristate "Contec PIO1616L digital I/O board support"
829 Enable support for the Contec PIO1616L digital I/O board
831 To compile this driver as a module, choose M here: the module will be
832 called contec_pci_dio.
835 tristate "Data Translation DT3000 series support"
838 Enable support for Data Translation DT3000 series
839 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
842 To compile this driver as a module, choose M here: the module will be
845 config COMEDI_DYNA_PCI10XX
846 tristate "Dynalog PCI DAQ series support"
849 Enable support for Dynalog PCI DAQ series
852 To compile this driver as a module, choose M here: the module will be
855 config COMEDI_UNIOXX5
856 tristate "Fastwel UNIOxx-5 analog and digital io board support"
859 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
861 To compile this driver as a module, choose M here: the module will be
864 config COMEDI_GSC_HPDI
865 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
869 Enable support for General Standards Corporation high speed parallel
870 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
871 Only receive mode works, transmit not supported.
873 To compile this driver as a module, choose M here: the module will be
876 config COMEDI_ICP_MULTI
877 tristate "Inova ICP_MULTI support"
880 Enable support for Inova ICP_MULTI card
882 To compile this driver as a module, choose M here: the module will be
885 config COMEDI_II_PCI20KC
886 tristate "Intelligent Instruments PCI-20001C carrier support"
889 Enable support for Intelligent Instruments PCI-20001C carrier
890 PCI-20001, PCI-20006 and PCI-20341
892 To compile this driver as a module, choose M here: the module will be
895 config COMEDI_DAQBOARD2000
896 tristate "IOtech DAQboard/2000 support"
900 Enable support for the IOtech DAQboard/2000
902 To compile this driver as a module, choose M here: the module will be
905 config COMEDI_JR3_PCI
906 tristate "JR3/PCI force sensor board support"
909 Enable support for JR3/PCI force sensor boards
911 To compile this driver as a module, choose M here: the module will be
914 config COMEDI_KE_COUNTER
915 tristate "Kolter-Electronic PCI Counter 1 card support"
918 Enable support for Kolter-Electronic PCI Counter 1 cards
920 To compile this driver as a module, choose M here: the module will be
923 config COMEDI_CB_PCIDAS64
924 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
929 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
930 60xx, and 4020 series with the PLX 9080 PCI controller
932 To compile this driver as a module, choose M here: the module will be
935 config COMEDI_CB_PCIDAS
936 tristate "MeasurementComputing PCI-DAS support"
941 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
942 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
943 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
946 To compile this driver as a module, choose M here: the module will be
949 config COMEDI_CB_PCIDDA
950 tristate "MeasurementComputing PCI-DDA series support"
954 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
955 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
956 PCI-DDA04/16 and PCI-DDA02/16
958 To compile this driver as a module, choose M here: the module will be
961 config COMEDI_CB_PCIDIO
962 tristate "MeasurementComputing PCI-DIO series support"
966 Enable support for ComputerBoards/MeasurementComputing PCI-DIO series
967 PCI-DIO24, PCI-DIO24H and PCI-DIO48H
969 To compile this driver as a module, choose M here: the module will be
972 config COMEDI_CB_PCIMDAS
973 tristate "MeasurementComputing PCIM-DAS1602/16 support"
977 Enable support for ComputerBoards/MeasurementComputing PCI Migration
978 series PCIM-DAS1602/16
980 To compile this driver as a module, choose M here: the module will be
983 config COMEDI_CB_PCIMDDA
984 tristate "MeasurementComputing PCIM-DDA06-16 support"
988 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
990 To compile this driver as a module, choose M here: the module will be
994 tristate "Meilhaus ME-4000 support"
997 Enable support for Meilhaus PCI data acquisition cards
998 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
1000 To compile this driver as a module, choose M here: the module will be
1003 config COMEDI_ME_DAQ
1004 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
1007 Enable support for Meilhaus PCI data acquisition cards
1008 ME-2000i, ME-2600i and ME-3000vm1
1010 To compile this driver as a module, choose M here: the module will be
1013 config COMEDI_NI_6527
1014 tristate "NI 6527 support"
1015 depends on COMEDI_MITE
1018 Enable support for the National Instruments 6527 PCI card
1020 To compile this driver as a module, choose M here: the module will be
1023 config COMEDI_NI_65XX
1024 tristate "NI 65xx static dio PCI card support"
1025 depends on COMEDI_MITE
1028 Enable support for National Instruments 65xx static dio boards.
1029 Supported devices: National Instruments PCI-6509 (ni_65xx),
1030 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1031 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1032 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1034 To compile this driver as a module, choose M here: the module will be
1037 config COMEDI_NI_660X
1038 tristate "NI 660x counter/timer PCI card support"
1039 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1042 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1043 PXI-6602 and PXI-6608.
1045 To compile this driver as a module, choose M here: the module will be
1048 config COMEDI_NI_670X
1049 tristate "NI 670x PCI card support"
1050 depends on COMEDI_MITE
1053 Enable support for National Instruments PCI-6703 and PCI-6704
1055 To compile this driver as a module, choose M here: the module will be
1058 config COMEDI_NI_PCIDIO
1059 tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support"
1060 depends on COMEDI_MITE
1064 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1065 PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503, PCI-6503B, PCI-6503X,
1066 PXI-6503, PCI-6533 and PCI-6534
1067 The DIO-96 appears as four 8255 subdevices. See the 8255
1068 driver notes for details.
1070 To compile this driver as a module, choose M here: the module will be
1073 config COMEDI_NI_PCIMIO
1074 tristate "NI PCI-MIO-E series and M series support"
1075 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1080 Enable support for National Instruments PCI-MIO-E series and M series
1081 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1082 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1083 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1084 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1085 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1086 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1087 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1088 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1089 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1091 To compile this driver as a module, choose M here: the module will be
1094 config COMEDI_RTD520
1095 tristate "Real Time Devices PCI4520/DM7520 support"
1099 Enable support for Real Time Devices PCI4520/DM7520
1101 To compile this driver as a module, choose M here: the module will be
1105 tristate "Sensoray s526 support"
1108 Enable support for Sensoray s526
1110 To compile this driver as a module, choose M here: the module will be
1114 tristate "Sensoray 626 support"
1118 Enable support for Sensoray 626
1120 To compile this driver as a module, choose M here: the module will be
1123 config COMEDI_SSV_DNP
1124 tristate "SSV Embedded Systems DIL/Net-PC support"
1127 Enable support for SSV Embedded Systems DIL/Net-PC
1129 To compile this driver as a module, choose M here: the module will be
1132 endif # COMEDI_PCI_DRIVERS
1134 menuconfig COMEDI_PCMCIA_DRIVERS
1135 tristate "Comedi PCMCIA drivers"
1136 depends on COMEDI && (PCMCIA || PCCARD)
1139 Enable comedi PCMCIA and PCCARD drivers to be built
1141 Note that the answer to this question won't directly affect the
1142 kernel: saying N will just cause the configurator to skip all
1143 the questions about PCMCIA comedi drivers.
1145 if COMEDI_PCMCIA_DRIVERS && PCMCIA
1147 config COMEDI_CB_DAS16_CS
1148 tristate "CB DAS16 series PCMCIA support"
1151 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1152 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1154 To compile this driver as a module, choose M here: the module will be
1157 config COMEDI_DAS08_CS
1158 tristate "CB DAS08 PCMCIA support"
1162 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1165 To compile this driver as a module, choose M here: the module will be
1168 config COMEDI_NI_DAQ_700_CS
1169 tristate "NI DAQCard-700 PCMCIA support"
1170 depends on COMEDI_NI_COMMON
1173 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1175 To compile this driver as a module, choose M here: the module will be
1178 config COMEDI_NI_DAQ_DIO24_CS
1179 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1180 depends on COMEDI_NI_COMMON
1184 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1186 To compile this driver as a module, choose M here: the module will be
1187 called ni_daq_dio24.
1189 config COMEDI_NI_LABPC_CS
1190 tristate "NI DAQCard-1200 PCMCIA support"
1191 depends on COMEDI_NI_LABPC
1194 Enable support for the National Instruments PCMCIA DAQCard-1200
1196 To compile this driver as a module, choose M here: the module will be
1199 config COMEDI_NI_MIO_CS
1200 tristate "NI DAQCard E series PCMCIA support"
1201 depends on COMEDI_NI_TIO && COMEDI_NI_COMMON
1206 Enable support for the National Instruments PCMCIA DAQCard E series
1207 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1210 To compile this driver as a module, choose M here: the module will be
1213 config COMEDI_QUATECH_DAQP_CS
1214 tristate "Quatech DAQP PCMCIA data capture card support"
1217 Enable support for the Quatech DAQP PCMCIA data capture cards
1218 DAQP-208 and DAQP-308
1220 To compile this driver as a module, choose M here: the module will be
1221 called quatech_daqp_cs.
1223 endif # COMEDI_PCMCIA_DRIVERS
1225 menuconfig COMEDI_USB_DRIVERS
1226 tristate "Comedi USB drivers"
1227 depends on COMEDI && USB
1230 Enable comedi USB drivers to be built
1232 Note that the answer to this question won't directly affect the
1233 kernel: saying N will just cause the configurator to skip all
1234 the questions about USB comedi drivers.
1236 if COMEDI_USB_DRIVERS && USB
1238 config COMEDI_DT9812
1239 tristate "DataTranslation DT9812 USB module support"
1242 Enable support for the Data Translation DT9812 USB module
1244 To compile this driver as a module, choose M here: the module will be
1247 config COMEDI_USBDUX
1248 tristate "ITL USB-DUX-D support"
1251 Enable support for the Incite Technology Ltd USB-DUX-D Board
1253 To compile this driver as a module, choose M here: the module will be
1256 config COMEDI_USBDUXFAST
1257 tristate "ITL USB-DUXfast support"
1261 Enable support for the Incite Technology Ltd USB-DUXfast Board
1263 To compile this driver as a module, choose M here: the module will be
1266 config COMEDI_USBDUXSIGMA
1267 tristate "ITL USB-DUXsigma support"
1271 Enable support for the Incite Technology Ltd USB-DUXsigma Board
1273 To compile this driver as a module, choose M here: the module will be
1276 config COMEDI_VMK80XX
1277 tristate "Velleman VM110/VM140 USB Board support"
1280 Build the Velleman USB Board Low-Level Driver supporting the
1281 K8055/K8061 aka VM110/VM140 devices
1283 To compile this driver as a module, choose M here: the module will be
1286 endif # COMEDI_USB_DRIVERS
1288 menuconfig COMEDI_NI_COMMON
1289 tristate "Comedi National Instruments card support"
1293 Enable comedi support for National Instruments cards.
1294 Modules in this section are used by many comedi NI drivers.
1296 Note that the answer to this question won't directly affect the
1297 kernel: saying N will just cause the configurator to skip all
1298 the questions about National Instruments cards.
1303 tristate "NI Mite PCI interface chip support"
1307 Enable support for National Instruments Mite PCI interface chip
1309 To compile this driver as a module, choose M here: the module will be
1312 config COMEDI_NI_TIO
1313 tristate "NI general purpose counter support"
1314 depends on COMEDI_MITE
1317 Enable support for National Instruments general purpose counters.
1318 This module is not used directly by end-users. Rather, it
1319 is used by other drivers (for example ni_660x and ni_pcimio)
1320 to provide support for NI's general purpose counters.
1322 To compile this driver as a modules, choose M here: two modules will
1323 be build: ni_tio and ni_tiocmd.
1325 config COMEDI_NI_LABPC
1326 tristate "NI Lab-PC and compatibles ISA and PCI support"
1327 depends on COMEDI_MITE
1330 depends on VIRT_TO_BUS
1333 Enable support for National Instruments Lab-PC and compatibles
1334 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1335 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1336 not yet been added to the driver.
1338 To compile this driver as a module, choose M here: the module will be
1341 endif # COMEDI_NI_COMMON
1344 tristate "Generic 8255 support"
1348 Enable generic 8255 support.
1350 You should enable compilation this driver if you plan to use a board
1351 that has an 8255 chip. For multifunction boards, the main driver will
1352 configure the 8255 subdevice automatically.
1354 Note that most PCI 8255 boards do NOT work with this driver, and
1355 need a separate driver as a wrapper.
1357 To compile this driver as a module, choose M here: the module will be
1361 tristate "DAS-08 compatible support"
1366 Enable support for DAS08 and compatible ISA, PC/104 and PCI cards.
1368 Note that PCMCIA DAS08 cards are not directly supported by this
1369 driver, and need a separate driver as a wrapper.
1371 To compile this driver as a module, choose M here: the module will be
1375 tristate "Comedi shared functions for low-level driver support"
1379 Enable support for shared functions for low-level drivers.
1380 This module is not used directly by end-users. Rather, it
1381 is used by many other comedi drivers.
1383 To compile this driver as a module, choose M here: the module will be