2 tristate "Data acquisition support (comedi)"
4 depends on BROKEN || FRV || M32R || MN10300 || SUPERH || TILE || X86
6 Enable support a wide range of data acquisition devices
12 bool "Comedi debugging"
14 This is an option for use by developers; most people should
15 say N here. This enables comedi core and driver debugging.
17 config COMEDI_DEFAULT_BUF_SIZE_KB
18 int "Comedi default initial asynchronous buffer size in KiB"
21 This is the default asynchronous buffer size which is used for
22 commands running in the background in kernel space. This
23 defaults to 2048 KiB of memory so that a 16 channel card
24 running at 10 kHz has of 2-4 seconds of buffer.
26 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
27 int "Comedi default maximum asynchronous buffer size in KiB"
30 This is the default maximum asynchronous buffer size which can
31 be requested by a userspace program without root privileges.
32 This is set to 20480 KiB so that a fast I/O card with 16
33 channels running at 100 kHz has 2-4 seconds of buffer.
35 menuconfig COMEDI_MISC_DRIVERS
36 bool "Comedi misc drivers"
38 Enable comedi misc drivers to be built
40 Note that the answer to this question won't directly affect the
41 kernel: saying N will just cause the configurator to skip all
42 the questions about misc non-hardware comedi drivers.
44 if COMEDI_MISC_DRIVERS
46 config COMEDI_KCOMEDILIB
47 tristate "Comedi kcomedilib"
52 tristate "Device bonding support"
53 depends on COMEDI_KCOMEDILIB
55 Enable support for a driver to 'bond' (merge) multiple subdevices
56 from multiple devices together as one.
58 To compile this driver as a module, choose M here: the module will be
62 tristate "Fake waveform generator support"
65 Enable support for the fake waveform generator.
66 This driver is mainly for testing purposes, but can also be used to
67 generate sample waveforms on systems that don't have data acquisition
70 To compile this driver as a module, choose M here: the module will be
74 tristate "Parallel port support"
76 Enable support for the standard parallel port.
77 A cheap and easy way to get a few more digital I/O lines. Steal
78 additional parallel ports from old computers or your neighbors'
81 To compile this driver as a module, choose M here: the module will be
82 called comedi_parport.
84 config COMEDI_SERIAL2002
85 tristate "Driver for serial connected hardware"
87 Enable support for serial connected hardware
89 To compile this driver as a module, choose M here: the module will be
93 tristate "Comedi skeleton driver"
95 Build the Skeleton driver, an example for driver writers
97 To compile this driver as a module, choose M here: the module will be
100 endif # COMEDI_MISC_DRIVERS
102 menuconfig COMEDI_ISA_DRIVERS
103 bool "Comedi ISA and PC/104 drivers"
106 Enable comedi ISA and PC/104 drivers to be built
108 Note that the answer to this question won't directly affect the
109 kernel: saying N will just cause the configurator to skip all
110 the questions about ISA and PC/104 comedi drivers.
112 if COMEDI_ISA_DRIVERS
114 config COMEDI_ACL7225B
115 tristate "ADlink NuDAQ ACL-7225b and compatibles support"
117 Enable support for ADlink NuDAQ ACL-7225b and compatibles,
118 ADlink ACL-7225b (acl7225b), ICP P16R16DIO (p16r16dio)
120 To compile this driver as a module, choose M here: the module will be
124 tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
126 Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
128 To compile this driver as a module, choose M here: the module will be
132 tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
135 Enable support for Advantech PCL-724, PCL-722, PCL-731 and
136 ADlink ACL-7122, ACL-7124, PET-48DIO ISA cards
138 To compile this driver as a module, choose M here: the module will be
142 tristate "Advantech PCL-725 and compatible ISA card support"
144 Enable support for Advantech PCL-725 and compatible ISA cards.
146 To compile this driver as a module, choose M here: the module will be
150 tristate "Advantech PCL-726 and compatible ISA card support"
152 Enable support for Advantech PCL-726 and compatible ISA cards.
154 To compile this driver as a module, choose M here: the module will be
158 tristate "Advantech PCL-730 and ADlink ACL-7130 ISA card support"
160 Enable support for Advantech PCL-730, ICP ISO-730 and ADlink
163 To compile this driver as a module, choose M here: the module will be
167 tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
168 depends on VIRT_TO_BUS
170 Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
171 ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
172 A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
174 To compile this driver as a module, choose M here: the module will be
178 tristate "Advantech PCL-814 and PCL-816 ISA card support"
179 depends on VIRT_TO_BUS
181 Enable support for Advantech PCL-814 and PCL-816 ISA cards
183 To compile this driver as a module, choose M here: the module will be
187 tristate "Advantech PCL-718 and PCL-818 ISA card support"
188 depends on VIRT_TO_BUS
190 Enable support for Advantech PCL-818 ISA cards
191 PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
193 To compile this driver as a module, choose M here: the module will be
196 config COMEDI_PCM3724
197 tristate "Advantech PCM-3724 PC/104 card support"
200 Enable support for Advantech PCM-3724 PC/104 cards.
202 To compile this driver as a module, choose M here: the module will be
205 config COMEDI_PCM3730
206 tristate "Advantech PCM-3730 and clone PC/104 board support"
208 Enable support for Advantech PCM-3730 and clone PC/104 boards
210 To compile this driver as a module, choose M here: the module will be
213 config COMEDI_AMPLC_DIO200_ISA
214 tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
215 select COMEDI_AMPLC_DIO200
217 Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
218 PC272E ISA DIO boards
220 To compile this driver as a module, choose M here: the module will be
223 config COMEDI_AMPLC_PC236_ISA
224 tristate "Amplicon PC36AT DIO board support"
225 select COMEDI_AMPLC_PC236
227 Enable support for Amplicon PC36AT ISA DIO board.
229 To compile this driver as a module, choose M here: the module will be
232 config COMEDI_AMPLC_PC263_ISA
233 tristate "Amplicon PC263 relay board support"
234 select COMEDI_AMPLC_PC263
236 Enable support for Amplicon PC263 ISA relay board.
238 To compile this driver as a module, choose M here: the module will be
242 tristate "Analog Devices RTI-800/815 ISA card support"
244 Enable support for Analog Devices RTI-800/815 ISA cards
246 To compile this driver as a module, choose M here: the module will be
250 tristate "Analog Devices RTI-802 ISA card support"
252 Enable support for Analog Devices RTI-802 ISA cards
254 To compile this driver as a module, choose M here: the module will be
257 config COMEDI_DAS16M1
258 tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
262 Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
264 To compile this driver as a module, choose M here: the module will be
267 config COMEDI_DAS08_ISA
268 tristate "DAS-08 compatible ISA and PC/104 card support"
271 Enable support for Keithley Metrabyte/ComputerBoards DAS08
272 and compatible ISA and PC/104 cards:
273 Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
274 DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
275 DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
277 To compile this driver as a module, choose M here: the module will be
281 tristate "DAS-16 compatible ISA and PC/104 card support"
285 Enable support for Keithley Metrabyte/ComputerBoards DAS16
286 and compatible ISA and PC/104 cards:
287 Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
288 DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
289 ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
290 PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
291 CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
292 CIO-DAS1602/16, CIO-DAS16/330
294 To compile this driver as a module, choose M here: the module will be
298 tristate "DAS800 and compatible ISA card support"
301 Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
302 Keithley Metrabyte DAS-800, DAS-801, DAS-802
303 Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
306 To compile this driver as a module, choose M here: the module will be
309 config COMEDI_DAS1800
310 tristate "DAS1800 and compatible ISA card support"
311 depends on VIRT_TO_BUS
314 Enable support for DAS1800 and compatible ISA cards
315 Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
316 DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
317 DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
318 DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
321 To compile this driver as a module, choose M here: the module will be
324 config COMEDI_DAS6402
325 tristate "DAS6402 and compatible ISA card support"
327 Enable support for DAS6402 and compatible ISA cards
328 Computerboards, Keithley Metrabyte DAS6402 and compatibles
330 To compile this driver as a module, choose M here: the module will be
334 tristate "Data Translation DT2801 ISA card support"
336 Enable support for Data Translation DT2801 ISA cards
338 To compile this driver as a module, choose M here: the module will be
342 tristate "Data Translation DT2811 ISA card support"
344 Enable support for Data Translation DT2811 ISA cards
346 To compile this driver as a module, choose M here: the module will be
350 tristate "Data Translation DT2814 ISA card support"
352 Enable support for Data Translation DT2814 ISA cards
354 To compile this driver as a module, choose M here: the module will be
358 tristate "Data Translation DT2815 ISA card support"
360 Enable support for Data Translation DT2815 ISA cards
362 To compile this driver as a module, choose M here: the module will be
366 tristate "Data Translation DT2817 ISA card support"
368 Enable support for Data Translation DT2817 ISA cards
370 To compile this driver as a module, choose M here: the module will be
374 tristate "Data Translation DT2821 series and DT-EZ ISA card support"
376 depends on VIRT_TO_BUS
378 Enable support for Data Translation DT2821 series including DT-EZ
379 DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
380 DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
381 DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
383 To compile this driver as a module, choose M here: the module will be
386 config COMEDI_DMM32AT
387 tristate "Diamond Systems MM-32-AT PC/104 board support"
389 Enable support for Diamond Systems MM-32-AT PC/104 boards
391 To compile this driver as a module, choose M here: the module will be
395 tristate "FL512 ISA card support"
397 Enable support for FL512 ISA card
399 To compile this driver as a module, choose M here: the module will be
402 config COMEDI_AIO_AIO12_8
403 tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
406 Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
408 To compile this driver as a module, choose M here: the module will be
411 config COMEDI_AIO_IIRO_16
412 tristate "I/O Products PC/104 IIRO16 Board support"
414 Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
417 To compile this driver as a module, choose M here: the module will be
420 config COMEDI_C6XDIGIO
421 tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
423 Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
426 To compile this driver as a module, choose M here: the module will be
430 tristate "Micro/sys MPC-624 PC/104 board support"
432 Enable support for Micro/sys MPC-624 PC/104 board
434 To compile this driver as a module, choose M here: the module will be
438 tristate "MicroAxial ADQ12-B data acquisition and control card support"
440 Enable MicroAxial ADQ12-B daq and control card support.
442 To compile this driver as a module, choose M here: the module will be
445 config COMEDI_NI_AT_A2150
446 tristate "NI AT-A2150 ISA card support"
447 depends on VIRT_TO_BUS
449 Enable support for National Instruments AT-A2150 cards
451 To compile this driver as a module, choose M here: the module will be
454 config COMEDI_NI_AT_AO
455 tristate "NI AT-AO-6/10 EISA card support"
457 Enable support for National Instruments AT-AO-6/10 cards
459 To compile this driver as a module, choose M here: the module will be
462 config COMEDI_NI_ATMIO
463 tristate "NI AT-MIO E series ISA-PNP card support"
468 Enable support for National Instruments AT-MIO E series cards
469 National Instruments AT-MIO-16E-1 (ni_atmio),
470 AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
471 AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
473 To compile this driver as a module, choose M here: the module will be
476 config COMEDI_NI_ATMIO16D
477 tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support"
481 Enable support for National Instruments AT-MIO16/AT-MIO16D cards.
483 To compile this driver as a module, choose M here: the module will be
487 tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
489 Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
491 To compile this driver as a module, choose M here: the module will be
494 config COMEDI_PCMDA12
495 tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
497 Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
498 Note that the board is not ISA-PNP capable and thus needs the I/O
499 port comedi_config parameter.
501 To compile this driver as a module, choose M here: the module will be
505 tristate "Winsystems PCM-MIO PC/104 board support"
507 Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
509 To compile this driver as a module, choose M here: the module will be
513 tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
515 Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
517 To compile this driver as a module, choose M here: the module will be
520 config COMEDI_MULTIQ3
521 tristate "Quanser Consulting MultiQ-3 ISA card support"
523 Enable support for Quanser Consulting MultiQ-3 ISA cards
525 To compile this driver as a module, choose M here: the module will be
529 tristate "Generic driver for very simple devices"
531 Enable generic support for very simple / POC (Piece of Crap) boards,
532 Keithley Metrabyte DAC-02 (dac02), Advantech PCL-733 (pcl733) and
535 To compile this driver as a module, choose M here: the module will be
538 endif # COMEDI_ISA_DRIVERS
540 menuconfig COMEDI_PCI_DRIVERS
541 bool "Comedi PCI drivers"
544 Enable comedi PCI drivers to be built
546 Note that the answer to this question won't directly affect the
547 kernel: saying N will just cause the configurator to skip all
548 the questions about PCI comedi drivers.
550 if COMEDI_PCI_DRIVERS
552 config COMEDI_8255_PCI
553 tristate "Generic PCI based 8255 digital i/o board support"
556 Enable support for PCI based 8255 digital i/o boards. This driver
557 provides a PCI wrapper around the generic 8255 driver.
560 ADlink - PCI-7224, PCI-7248, and PCI-7296
561 Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
563 National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
564 PCI-6503B, PCI-6503X, and PXI-6503
566 To compile this driver as a module, choose M here: the module will
569 config COMEDI_ADDI_APCI_035
570 tristate "ADDI-DATA APCI_035 support"
572 Enable support for ADDI-DATA APCI_035 cards
574 To compile this driver as a module, choose M here: the module will be
575 called addi_apci_035.
577 config COMEDI_ADDI_APCI_1032
578 tristate "ADDI-DATA APCI_1032 support"
580 Enable support for ADDI-DATA APCI_1032 cards
582 To compile this driver as a module, choose M here: the module will be
583 called addi_apci_1032.
585 config COMEDI_ADDI_APCI_1500
586 tristate "ADDI-DATA APCI_1500 support"
588 Enable support for ADDI-DATA APCI_1500 cards
590 To compile this driver as a module, choose M here: the module will be
591 called addi_apci_1500.
593 config COMEDI_ADDI_APCI_1516
594 tristate "ADDI-DATA APCI-1016/1516/2016 support"
596 Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
597 These are 16 channel, optically isolated, digital I/O boards. The 1516
598 and 2016 boards also have a watchdog for resetting the outputs to "0".
600 To compile this driver as a module, choose M here: the module will be
601 called addi_apci_1516.
603 config COMEDI_ADDI_APCI_1564
604 tristate "ADDI-DATA APCI_1564 support"
606 Enable support for ADDI-DATA APCI_1564 cards
608 To compile this driver as a module, choose M here: the module will be
609 called addi_apci_1564.
611 config COMEDI_ADDI_APCI_16XX
612 tristate "ADDI-DATA APCI_16xx support"
614 Enable support for ADDI-DATA APCI_16xx cards
616 To compile this driver as a module, choose M here: the module will be
617 called addi_apci_16xx.
619 config COMEDI_ADDI_APCI_2032
620 tristate "ADDI-DATA APCI_2032 support"
622 Enable support for ADDI-DATA APCI_2032 cards
624 To compile this driver as a module, choose M here: the module will be
625 called addi_apci_2032.
627 config COMEDI_ADDI_APCI_2200
628 tristate "ADDI-DATA APCI_2200 support"
630 Enable support for ADDI-DATA APCI_2200 cards
632 To compile this driver as a module, choose M here: the module will be
633 called addi_apci_2200.
635 config COMEDI_ADDI_APCI_3120
636 tristate "ADDI-DATA APCI_3120/3001 support"
637 depends on VIRT_TO_BUS
640 Enable support for ADDI-DATA APCI_3120/3001 cards
642 To compile this driver as a module, choose M here: the module will be
643 called addi_apci_3120.
645 config COMEDI_ADDI_APCI_3501
646 tristate "ADDI-DATA APCI_3501 support"
648 Enable support for ADDI-DATA APCI_3501 cards
650 To compile this driver as a module, choose M here: the module will be
651 called addi_apci_3501.
653 config COMEDI_ADDI_APCI_3XXX
654 tristate "ADDI-DATA APCI_3xxx support"
656 Enable support for ADDI-DATA APCI_3xxx cards
658 To compile this driver as a module, choose M here: the module will be
659 called addi_apci_3xxx.
661 config COMEDI_ADL_PCI6208
662 tristate "ADLink PCI-6208A support"
664 Enable support for ADLink PCI-6208A cards
666 To compile this driver as a module, choose M here: the module will be
669 config COMEDI_ADL_PCI7X3X
670 tristate "ADLink PCI-723X/743X isolated digital i/o board support"
672 Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
673 Supported boards include the 32-channel PCI-7230 (16 in/16 out),
674 PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
675 PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
677 To compile this driver as a module, choose M here: the module will be
680 config COMEDI_ADL_PCI8164
681 tristate "ADLink PCI-8164 4 Axes Motion Control board support"
683 Enable support for ADlink PCI-8164 4 Axes Motion Control board
685 To compile this driver as a module, choose M here: the module will be
688 config COMEDI_ADL_PCI9111
689 tristate "ADLink PCI-9111HR support"
692 Enable support for ADlink PCI9111 cards
694 To compile this driver as a module, choose M here: the module will be
697 config COMEDI_ADL_PCI9118
698 tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
700 depends on VIRT_TO_BUS
702 Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
704 To compile this driver as a module, choose M here: the module will be
707 config COMEDI_ADV_PCI1710
708 tristate "Advantech PCI-171x, PCI-1720 and PCI-1731 support"
710 Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
711 PCI-1713, PCI-1720 and PCI-1731
713 To compile this driver as a module, choose M here: the module will be
716 config COMEDI_ADV_PCI1723
717 tristate "Advantech PCI-1723 support"
719 Enable support for Advantech PCI-1723 cards
721 To compile this driver as a module, choose M here: the module will be
724 config COMEDI_ADV_PCI_DIO
725 tristate "Advantech PCI DIO card support"
728 Enable support for Advantech PCI DIO cards
729 PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
730 PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756,
731 PCI-1760 and PCI-1762
733 To compile this driver as a module, choose M here: the module will be
736 config COMEDI_AMPLC_DIO200_PCI
737 tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
738 select COMEDI_AMPLC_DIO200
740 Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
741 and PCIe296 DIO boards.
743 To compile this driver as a module, choose M here: the module will be
746 config COMEDI_AMPLC_PC236_PCI
747 tristate "Amplicon PCI236 DIO board support"
748 select COMEDI_AMPLC_PC236
750 Enable support for Amplicon PCI236 DIO board.
752 To compile this driver as a module, choose M here: the module will be
755 config COMEDI_AMPLC_PC263_PCI
756 tristate "Amplicon PCI263 relay board support"
757 select COMEDI_AMPLC_PC263
759 Enable support for Amplicon PCI263 relay board.
761 To compile this driver as a module, choose M here: the module will be
764 config COMEDI_AMPLC_PCI224
765 tristate "Amplicon PCI224 and PCI234 support"
768 Enable support for Amplicon PCI224 and PCI234 AO boards
770 To compile this driver as a module, choose M here: the module will be
773 config COMEDI_AMPLC_PCI230
774 tristate "Amplicon PCI230 and PCI260 support"
777 Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
780 To compile this driver as a module, choose M here: the module will be
783 config COMEDI_CONTEC_PCI_DIO
784 tristate "Contec PIO1616L digital I/O board support"
786 Enable support for the Contec PIO1616L digital I/O board
788 To compile this driver as a module, choose M here: the module will be
789 called contec_pci_dio.
791 config COMEDI_DAS08_PCI
792 tristate "DAS-08 PCI support"
795 Enable support for PCI DAS-08 cards.
797 To compile this driver as a module, choose M here: the module will be
801 tristate "Data Translation DT3000 series support"
803 Enable support for Data Translation DT3000 series
804 DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
807 To compile this driver as a module, choose M here: the module will be
810 config COMEDI_DYNA_PCI10XX
811 tristate "Dynalog PCI DAQ series support"
813 Enable support for Dynalog PCI DAQ series
816 To compile this driver as a module, choose M here: the module will be
819 config COMEDI_UNIOXX5
820 tristate "Fastwel UNIOxx-5 analog and digital io board support"
822 Enable support for Fastwel UNIOxx-5 (analog and digital i/o) boards
824 To compile this driver as a module, choose M here: the module will be
827 config COMEDI_GSC_HPDI
828 tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
831 Enable support for General Standards Corporation high speed parallel
832 digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
833 Only receive mode works, transmit not supported.
835 To compile this driver as a module, choose M here: the module will be
838 config COMEDI_ICP_MULTI
839 tristate "Inova ICP_MULTI support"
841 Enable support for Inova ICP_MULTI card
843 To compile this driver as a module, choose M here: the module will be
846 config COMEDI_II_PCI20KC
847 tristate "Intelligent Instruments PCI-20001C carrier support"
849 Enable support for Intelligent Instruments PCI-20001C carrier
850 PCI-20001, PCI-20006 and PCI-20341
852 To compile this driver as a module, choose M here: the module will be
855 config COMEDI_DAQBOARD2000
856 tristate "IOtech DAQboard/2000 support"
859 Enable support for the IOtech DAQboard/2000
861 To compile this driver as a module, choose M here: the module will be
864 config COMEDI_JR3_PCI
865 tristate "JR3/PCI force sensor board support"
867 Enable support for JR3/PCI force sensor boards
869 To compile this driver as a module, choose M here: the module will be
872 config COMEDI_KE_COUNTER
873 tristate "Kolter-Electronic PCI Counter 1 card support"
875 Enable support for Kolter-Electronic PCI Counter 1 cards
877 To compile this driver as a module, choose M here: the module will be
880 config COMEDI_CB_PCIDAS64
881 tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
885 Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
886 60xx, and 4020 series with the PLX 9080 PCI controller
888 To compile this driver as a module, choose M here: the module will be
891 config COMEDI_CB_PCIDAS
892 tristate "MeasurementComputing PCI-DAS support"
896 Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
897 AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
898 PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
901 To compile this driver as a module, choose M here: the module will be
904 config COMEDI_CB_PCIDDA
905 tristate "MeasurementComputing PCI-DDA series support"
908 Enable support for ComputerBoards/MeasurementComputing PCI-DDA
909 series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
910 PCI-DDA04/16 and PCI-DDA02/16
912 To compile this driver as a module, choose M here: the module will be
915 config COMEDI_CB_PCIMDAS
916 tristate "MeasurementComputing PCIM-DAS1602/16 support"
919 Enable support for ComputerBoards/MeasurementComputing PCI Migration
920 series PCIM-DAS1602/16
922 To compile this driver as a module, choose M here: the module will be
925 config COMEDI_CB_PCIMDDA
926 tristate "MeasurementComputing PCIM-DDA06-16 support"
929 Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
931 To compile this driver as a module, choose M here: the module will be
935 tristate "Meilhaus ME-4000 support"
937 Enable support for Meilhaus PCI data acquisition cards
938 ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
940 To compile this driver as a module, choose M here: the module will be
944 tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
946 Enable support for Meilhaus PCI data acquisition cards
947 ME-2000i, ME-2600i and ME-3000vm1
949 To compile this driver as a module, choose M here: the module will be
952 config COMEDI_NI_6527
953 tristate "NI 6527 support"
956 Enable support for the National Instruments 6527 PCI card
958 To compile this driver as a module, choose M here: the module will be
961 config COMEDI_NI_65XX
962 tristate "NI 65xx static dio PCI card support"
965 Enable support for National Instruments 65xx static dio boards.
966 Supported devices: National Instruments PCI-6509 (ni_65xx),
967 PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
968 PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
969 PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
971 To compile this driver as a module, choose M here: the module will be
974 config COMEDI_NI_660X
975 tristate "NI 660x counter/timer PCI card support"
976 select COMEDI_NI_TIOCMD
978 Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
979 PXI-6602 and PXI-6608.
981 To compile this driver as a module, choose M here: the module will be
984 config COMEDI_NI_670X
985 tristate "NI 670x PCI card support"
988 Enable support for National Instruments PCI-6703 and PCI-6704
990 To compile this driver as a module, choose M here: the module will be
993 config COMEDI_NI_LABPC
994 tristate "NI Lab-PC and compatibles ISA and PCI support"
998 depends on VIRT_TO_BUS
1000 Enable support for National Instruments Lab-PC and compatibles
1001 Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200.
1002 Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
1003 not yet been added to the driver.
1005 To compile this driver as a module, choose M here: the module will be
1008 config COMEDI_NI_PCIDIO
1009 tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1013 Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1014 PCI-6533 and PCI-6534
1016 To compile this driver as a module, choose M here: the module will be
1019 config COMEDI_NI_PCIMIO
1020 tristate "NI PCI-MIO-E series and M series support"
1021 select COMEDI_NI_TIOCMD
1025 Enable support for National Instruments PCI-MIO-E series and M series
1026 (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1027 PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1028 PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1029 PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1030 PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1031 PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1032 PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1033 PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1034 PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1036 To compile this driver as a module, choose M here: the module will be
1039 config COMEDI_RTD520
1040 tristate "Real Time Devices PCI4520/DM7520 support"
1042 Enable support for Real Time Devices PCI4520/DM7520
1044 To compile this driver as a module, choose M here: the module will be
1048 tristate "Sensoray s526 support"
1050 Enable support for Sensoray s526
1052 To compile this driver as a module, choose M here: the module will be
1056 tristate "Sensoray 626 support"
1059 Enable support for Sensoray 626
1061 To compile this driver as a module, choose M here: the module will be
1064 config COMEDI_SSV_DNP
1065 tristate "SSV Embedded Systems DIL/Net-PC support"
1067 Enable support for SSV Embedded Systems DIL/Net-PC
1069 To compile this driver as a module, choose M here: the module will be
1075 config COMEDI_NI_TIOCMD
1077 select COMEDI_NI_TIO
1080 endif # COMEDI_PCI_DRIVERS
1082 menuconfig COMEDI_PCMCIA_DRIVERS
1083 bool "Comedi PCMCIA drivers"
1086 Enable comedi PCMCIA and PCCARD drivers to be built
1088 Note that the answer to this question won't directly affect the
1089 kernel: saying N will just cause the configurator to skip all
1090 the questions about PCMCIA comedi drivers.
1092 if COMEDI_PCMCIA_DRIVERS
1094 config COMEDI_CB_DAS16_CS
1095 tristate "CB DAS16 series PCMCIA support"
1097 Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1098 cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1100 To compile this driver as a module, choose M here: the module will be
1103 config COMEDI_DAS08_CS
1104 tristate "CB DAS08 PCMCIA support"
1107 Enable support for the ComputerBoards/MeasurementComputing DAS-08
1110 To compile this driver as a module, choose M here: the module will be
1113 config COMEDI_NI_DAQ_700_CS
1114 tristate "NI DAQCard-700 PCMCIA support"
1116 Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1118 To compile this driver as a module, choose M here: the module will be
1121 config COMEDI_NI_DAQ_DIO24_CS
1122 tristate "NI DAQ-Card DIO-24 PCMCIA support"
1125 Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1127 To compile this driver as a module, choose M here: the module will be
1128 called ni_daq_dio24.
1130 config COMEDI_NI_LABPC_CS
1131 tristate "NI DAQCard-1200 PCMCIA support"
1132 depends on COMEDI_NI_LABPC
1134 Enable support for the National Instruments PCMCIA DAQCard-1200
1136 To compile this driver as a module, choose M here: the module will be
1139 config COMEDI_NI_MIO_CS
1140 tristate "NI DAQCard E series PCMCIA support"
1141 select COMEDI_NI_TIO
1145 Enable support for the National Instruments PCMCIA DAQCard E series
1146 DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1149 To compile this driver as a module, choose M here: the module will be
1152 config COMEDI_QUATECH_DAQP_CS
1153 tristate "Quatech DAQP PCMCIA data capture card support"
1155 Enable support for the Quatech DAQP PCMCIA data capture cards
1156 DAQP-208 and DAQP-308
1158 To compile this driver as a module, choose M here: the module will be
1159 called quatech_daqp_cs.
1161 endif # COMEDI_PCMCIA_DRIVERS
1163 menuconfig COMEDI_USB_DRIVERS
1164 bool "Comedi USB drivers"
1167 Enable comedi USB drivers to be built
1169 Note that the answer to this question won't directly affect the
1170 kernel: saying N will just cause the configurator to skip all
1171 the questions about USB comedi drivers.
1173 if COMEDI_USB_DRIVERS
1175 config COMEDI_DT9812
1176 tristate "DataTranslation DT9812 USB module support"
1178 Enable support for the Data Translation DT9812 USB module
1180 To compile this driver as a module, choose M here: the module will be
1183 config COMEDI_USBDUX
1184 tristate "ITL USB-DUX-D support"
1186 Enable support for the Incite Technology Ltd USB-DUX-D Board
1188 To compile this driver as a module, choose M here: the module will be
1191 config COMEDI_USBDUXFAST
1192 tristate "ITL USB-DUXfast support"
1195 Enable support for the Incite Technology Ltd USB-DUXfast Board
1197 To compile this driver as a module, choose M here: the module will be
1200 config COMEDI_USBDUXSIGMA
1201 tristate "ITL USB-DUXsigma support"
1204 Enable support for the Incite Technology Ltd USB-DUXsigma Board
1206 To compile this driver as a module, choose M here: the module will be
1209 config COMEDI_VMK80XX
1210 tristate "Velleman VM110/VM140 USB Board support"
1212 Build the Velleman USB Board Low-Level Driver supporting the
1213 K8055/K8061 aka VM110/VM140 devices
1215 To compile this driver as a module, choose M here: the module will be
1218 endif # COMEDI_USB_DRIVERS
1221 tristate "Generic 8255 support"
1223 Enable generic 8255 support.
1225 You should enable compilation this driver if you plan to use a board
1226 that has an 8255 chip. For multifunction boards, the main driver will
1227 configure the 8255 subdevice automatically.
1229 Note that most PCI based 8255 boards use the 8255_pci driver as a
1230 wrapper around this driver.
1232 To compile this driver as a module, choose M here: the module will be
1238 config COMEDI_AMPLC_DIO200
1241 config COMEDI_AMPLC_PC236
1245 config COMEDI_AMPLC_PC263
1252 config COMEDI_NI_TIO