drivers/staging/tm6000/tm6000-cards.c

   1 /*
   2  *  tm6000-cards.c - driver for TM5600/TM6000/TM6010 USB video capture devices
   3  *
   4  *  Copyright (C) 2006-2007 Mauro Carvalho Chehab <mchehab@infradead.org>
   5  *
   6  *  This program is free software; you can redistribute it and/or modify
   7  *  it under the terms of the GNU General Public License as published by
   8  *  the Free Software Foundation version 2
   9  *
  10  *  This program is distributed in the hope that it will be useful,
  11  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  *  GNU General Public License for more details.
  14  *
  15  *  You should have received a copy of the GNU General Public License
  16  *  along with this program; if not, write to the Free Software
  17  *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  18  */
  19
  20 #include <linux/init.h>
  21 #include <linux/module.h>
  22 #include <linux/pci.h>
  23 #include <linux/delay.h>
  24 #include <linux/i2c.h>
  25 #include <linux/usb.h>
  26 #include <linux/version.h>
  27 #include <linux/slab.h>
  28 #include <media/v4l2-common.h>
  29 #include <media/tuner.h>
  30 #include <media/tvaudio.h>
  31 #include <media/i2c-addr.h>
  32 #include <media/rc-map.h>
  33
  34 #include "tm6000.h"
  35 #include "tm6000-regs.h"
  36 #include "tuner-xc2028.h"
  37 #include "xc5000.h"
  38
  39 #define TM6000_BOARD_UNKNOWN                    0
  40 #define TM5600_BOARD_GENERIC                    1
  41 #define TM6000_BOARD_GENERIC                    2
  42 #define TM6010_BOARD_GENERIC                    3
  43 #define TM5600_BOARD_10MOONS_UT821              4
  44 #define TM5600_BOARD_10MOONS_UT330              5
  45 #define TM6000_BOARD_ADSTECH_DUAL_TV            6
  46 #define TM6000_BOARD_FREECOM_AND_SIMILAR        7
  47 #define TM6000_BOARD_ADSTECH_MINI_DUAL_TV       8
  48 #define TM6010_BOARD_HAUPPAUGE_900H             9
  49 #define TM6010_BOARD_BEHOLD_WANDER              10
  50 #define TM6010_BOARD_BEHOLD_VOYAGER             11
  51 #define TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE 12
  52 #define TM6010_BOARD_TWINHAN_TU501              13
  53
  54 #define TM6000_MAXBOARDS        16
  55 static unsigned int card[]     = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
  56
  57 module_param_array(card,  int, NULL, 0444);
  58
  59 static unsigned long tm6000_devused;
  60
  61
  62 struct tm6000_board {
  63         char            *name;
  64
  65         struct tm6000_capabilities caps;
  66
  67         enum            tm6000_devtype type;    /* variant of the chipset */
  68         int             tuner_type;     /* type of the tuner */
  69         int             tuner_addr;     /* tuner address */
  70         int             demod_addr;     /* demodulator address */
  71
  72         struct tm6000_gpio gpio;
  73
  74         char            *ir_codes;
  75 };
  76
  77 struct tm6000_board tm6000_boards[] = {
  78         [TM6000_BOARD_UNKNOWN] = {
  79                 .name         = "Unknown tm6000 video grabber",
  80                 .caps = {
  81                         .has_tuner    = 1,
  82                 },
  83                 .gpio = {
  84                         .tuner_reset    = TM6000_GPIO_1,
  85                 },
  86         },
  87         [TM5600_BOARD_GENERIC] = {
  88                 .name         = "Generic tm5600 board",
  89                 .type         = TM5600,
  90                 .tuner_type   = TUNER_XC2028,
  91                 .tuner_addr   = 0xc2 >> 1,
  92                 .caps = {
  93                         .has_tuner      = 1,
  94                 },
  95                 .gpio = {
  96                         .tuner_reset    = TM6000_GPIO_1,
  97                 },
  98         },
  99         [TM6000_BOARD_GENERIC] = {
 100                 .name         = "Generic tm6000 board",
 101                 .tuner_type   = TUNER_XC2028,
 102                 .tuner_addr   = 0xc2 >> 1,
 103                 .caps = {
 104                         .has_tuner      = 1,
 105                         .has_dvb        = 1,
 106                 },
 107                 .gpio = {
 108                         .tuner_reset    = TM6000_GPIO_1,
 109                 },
 110         },
 111         [TM6010_BOARD_GENERIC] = {
 112                 .name         = "Generic tm6010 board",
 113                 .type         = TM6010,
 114                 .tuner_type   = TUNER_XC2028,
 115                 .tuner_addr   = 0xc2 >> 1,
 116                 .demod_addr   = 0x1e >> 1,
 117                 .caps = {
 118                         .has_tuner      = 1,
 119                         .has_dvb        = 1,
 120                         .has_zl10353    = 1,
 121                         .has_eeprom     = 1,
 122                         .has_remote     = 1,
 123                 },
 124                 .gpio = {
 125                         .tuner_reset    = TM6010_GPIO_2,
 126                         .tuner_on       = TM6010_GPIO_3,
 127                         .demod_reset    = TM6010_GPIO_1,
 128                         .demod_on       = TM6010_GPIO_4,
 129                         .power_led      = TM6010_GPIO_7,
 130                         .dvb_led        = TM6010_GPIO_5,
 131                         .ir             = TM6010_GPIO_0,
 132                 },
 133         },
 134         [TM5600_BOARD_10MOONS_UT821] = {
 135                 .name         = "10Moons UT 821",
 136                 .tuner_type   = TUNER_XC2028,
 137                 .type         = TM5600,
 138                 .tuner_addr   = 0xc2 >> 1,
 139                 .caps = {
 140                         .has_tuner    = 1,
 141                         .has_eeprom   = 1,
 142                 },
 143                 .gpio = {
 144                         .tuner_reset    = TM6000_GPIO_1,
 145                 },
 146         },
 147         [TM5600_BOARD_10MOONS_UT330] = {
 148                 .name         = "10Moons UT 330",
 149                 .tuner_type   = TUNER_PHILIPS_FQ1216AME_MK4,
 150                 .tuner_addr   = 0xc8 >> 1,
 151                 .caps = {
 152                         .has_tuner    = 1,
 153                         .has_dvb      = 0,
 154                         .has_zl10353  = 0,
 155                         .has_eeprom   = 1,
 156                 },
 157         },
 158         [TM6000_BOARD_ADSTECH_DUAL_TV] = {
 159                 .name         = "ADSTECH Dual TV USB",
 160                 .tuner_type   = TUNER_XC2028,
 161                 .tuner_addr   = 0xc8 >> 1,
 162                 .caps = {
 163                         .has_tuner    = 1,
 164                         .has_tda9874  = 1,
 165                         .has_dvb      = 1,
 166                         .has_zl10353  = 1,
 167                         .has_eeprom   = 1,
 168                 },
 169         },
 170         [TM6000_BOARD_FREECOM_AND_SIMILAR] = {
 171                 .name         = "Freecom Hybrid Stick / Moka DVB-T Receiver Dual",
 172                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 173                 .tuner_addr   = 0xc2 >> 1,
 174                 .demod_addr   = 0x1e >> 1,
 175                 .caps = {
 176                         .has_tuner    = 1,
 177                         .has_dvb      = 1,
 178                         .has_zl10353  = 1,
 179                         .has_eeprom   = 0,
 180                         .has_remote   = 1,
 181                 },
 182                 .gpio = {
 183                         .tuner_reset    = TM6000_GPIO_4,
 184                 },
 185         },
 186         [TM6000_BOARD_ADSTECH_MINI_DUAL_TV] = {
 187                 .name         = "ADSTECH Mini Dual TV USB",
 188                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 189                 .tuner_addr   = 0xc8 >> 1,
 190                 .demod_addr   = 0x1e >> 1,
 191                 .caps = {
 192                         .has_tuner    = 1,
 193                         .has_dvb      = 1,
 194                         .has_zl10353  = 1,
 195                         .has_eeprom   = 0,
 196                 },
 197                 .gpio = {
 198                         .tuner_reset    = TM6000_GPIO_4,
 199                 },
 200         },
 201         [TM6010_BOARD_HAUPPAUGE_900H] = {
 202                 .name         = "Hauppauge WinTV HVR-900H / WinTV USB2-Stick",
 203                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 204                 .tuner_addr   = 0xc2 >> 1,
 205                 .demod_addr   = 0x1e >> 1,
 206                 .type         = TM6010,
 207                 .caps = {
 208                         .has_tuner    = 1,
 209                         .has_dvb      = 1,
 210                         .has_zl10353  = 1,
 211                         .has_eeprom   = 1,
 212                         .has_remote   = 1,
 213                 },
 214                 .gpio = {
 215                         .tuner_reset    = TM6010_GPIO_2,
 216                         .tuner_on       = TM6010_GPIO_3,
 217                         .demod_reset    = TM6010_GPIO_1,
 218                         .demod_on       = TM6010_GPIO_4,
 219                         .power_led      = TM6010_GPIO_7,
 220                         .dvb_led        = TM6010_GPIO_5,
 221                         .ir             = TM6010_GPIO_0,
 222                 },
 223         },
 224         [TM6010_BOARD_BEHOLD_WANDER] = {
 225                 .name         = "Beholder Wander DVB-T/TV/FM USB2.0",
 226                 .tuner_type   = TUNER_XC5000,
 227                 .tuner_addr   = 0xc2 >> 1,
 228                 .demod_addr   = 0x1e >> 1,
 229                 .type         = TM6010,
 230                 .caps = {
 231                         .has_tuner    = 1,
 232                         .has_dvb      = 1,
 233                         .has_zl10353  = 1,
 234                         .has_eeprom   = 1,
 235                         .has_remote   = 1,
 236                 },
 237                 .gpio = {
 238                         .tuner_reset    = TM6010_GPIO_0,
 239                         .demod_reset    = TM6010_GPIO_1,
 240                         .power_led      = TM6010_GPIO_6,
 241                 },
 242         },
 243         [TM6010_BOARD_BEHOLD_VOYAGER] = {
 244                 .name         = "Beholder Voyager TV/FM USB2.0",
 245                 .tuner_type   = TUNER_XC5000,
 246                 .tuner_addr   = 0xc2 >> 1,
 247                 .type         = TM6010,
 248                 .caps = {
 249                         .has_tuner    = 1,
 250                         .has_dvb      = 0,
 251                         .has_zl10353  = 0,
 252                         .has_eeprom   = 1,
 253                         .has_remote   = 1,
 254                 },
 255                 .gpio = {
 256                         .tuner_reset    = TM6010_GPIO_0,
 257                         .power_led      = TM6010_GPIO_6,
 258                 },
 259         },
 260         [TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE] = {
 261                 .name         = "Terratec Cinergy Hybrid XE / Cinergy Hybrid-Stick",
 262                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 263                 .tuner_addr   = 0xc2 >> 1,
 264                 .demod_addr   = 0x1e >> 1,
 265                 .type         = TM6010,
 266                 .caps = {
 267                         .has_tuner    = 1,
 268                         .has_dvb      = 1,
 269                         .has_zl10353  = 1,
 270                         .has_eeprom   = 1,
 271                         .has_remote   = 1,
 272                 },
 273                 .gpio = {
 274                         .tuner_reset    = TM6010_GPIO_2,
 275                         .tuner_on       = TM6010_GPIO_3,
 276                         .demod_reset    = TM6010_GPIO_1,
 277                         .demod_on       = TM6010_GPIO_4,
 278                         .power_led      = TM6010_GPIO_7,
 279                         .dvb_led        = TM6010_GPIO_5,
 280                         .ir             = TM6010_GPIO_0,
 281                 },
 282                 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS,
 283         },
 284         [TM6010_BOARD_TWINHAN_TU501] = {
 285                 .name         = "Twinhan TU501(704D1)",
 286                 .tuner_type   = TUNER_XC2028, /* has a XC3028 */
 287                 .tuner_addr   = 0xc2 >> 1,
 288                 .demod_addr   = 0x1e >> 1,
 289                 .type         = TM6010,
 290                 .caps = {
 291                         .has_tuner    = 1,
 292                         .has_dvb      = 1,
 293                         .has_zl10353  = 1,
 294                         .has_eeprom   = 1,
 295                         .has_remote   = 1,
 296                 },
 297                 .gpio = {
 298                         .tuner_reset    = TM6010_GPIO_2,
 299                         .tuner_on       = TM6010_GPIO_3,
 300                         .demod_reset    = TM6010_GPIO_1,
 301                         .demod_on       = TM6010_GPIO_4,
 302                         .power_led      = TM6010_GPIO_7,
 303                         .dvb_led        = TM6010_GPIO_5,
 304                         .ir             = TM6010_GPIO_0,
 305                 },
 306         }
 307 };
 308
 309 /* table of devices that work with this driver */
 310 struct usb_device_id tm6000_id_table[] = {
 311         { USB_DEVICE(0x6000, 0x0001), .driver_info = TM5600_BOARD_10MOONS_UT821 },
 312         { USB_DEVICE(0x6000, 0x0002), .driver_info = TM6010_BOARD_GENERIC },
 313         { USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
 314         { USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
 315         { USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
 316         { USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 317         { USB_DEVICE(0x2040, 0x6601), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 318         { USB_DEVICE(0x2040, 0x6610), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 319         { USB_DEVICE(0x2040, 0x6611), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
 320         { USB_DEVICE(0x6000, 0xdec0), .driver_info = TM6010_BOARD_BEHOLD_WANDER },
 321         { USB_DEVICE(0x6000, 0xdec1), .driver_info = TM6010_BOARD_BEHOLD_VOYAGER },
 322         { USB_DEVICE(0x0ccd, 0x0086), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
 323         { USB_DEVICE(0x0ccd, 0x00A5), .driver_info = TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE },
 324         { USB_DEVICE(0x13d3, 0x3240), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 325         { USB_DEVICE(0x13d3, 0x3241), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 326         { USB_DEVICE(0x13d3, 0x3243), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 327         { USB_DEVICE(0x13d3, 0x3264), .driver_info = TM6010_BOARD_TWINHAN_TU501 },
 328         { },
 329 };
 330
 331 /* Control power led for show some activity */
 332 void tm6000_flash_led(struct tm6000_core *dev, u8 state)
 333 {
 334         /* Power LED unconfigured */
 335         if (!dev->gpio.power_led)
 336                 return;
 337
 338         /* ON Power LED */
 339         if (state) {
 340                 switch (dev->model) {
 341                 case TM6010_BOARD_HAUPPAUGE_900H:
 342                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 343                 case TM6010_BOARD_TWINHAN_TU501:
 344                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 345                                 dev->gpio.power_led, 0x00);
 346                         break;
 347                 case TM6010_BOARD_BEHOLD_WANDER:
 348                 case TM6010_BOARD_BEHOLD_VOYAGER:
 349                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 350                                 dev->gpio.power_led, 0x01);
 351                         break;
 352                 }
 353         }
 354         /* OFF Power LED */
 355         else {
 356                 switch (dev->model) {
 357                 case TM6010_BOARD_HAUPPAUGE_900H:
 358                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 359                 case TM6010_BOARD_TWINHAN_TU501:
 360                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 361                                 dev->gpio.power_led, 0x01);
 362                         break;
 363                 case TM6010_BOARD_BEHOLD_WANDER:
 364                 case TM6010_BOARD_BEHOLD_VOYAGER:
 365                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 366                                 dev->gpio.power_led, 0x00);
 367                         break;
 368                 }
 369         }
 370 }
 371
 372 /* Tuner callback to provide the proper gpio changes needed for xc5000 */
 373 int tm6000_xc5000_callback(void *ptr, int component, int command, int arg)
 374 {
 375         int rc = 0;
 376         struct tm6000_core *dev = ptr;
 377
 378         if (dev->tuner_type != TUNER_XC5000)
 379                 return 0;
 380
 381         switch (command) {
 382         case XC5000_TUNER_RESET:
 383                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 384                                dev->gpio.tuner_reset, 0x01);
 385                 msleep(15);
 386                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 387                                dev->gpio.tuner_reset, 0x00);
 388                 msleep(15);
 389                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 390                                dev->gpio.tuner_reset, 0x01);
 391                 break;
 392         }
 393         return rc;
 394 }
 395 EXPORT_SYMBOL_GPL(tm6000_xc5000_callback);
 396
 397 /* Tuner callback to provide the proper gpio changes needed for xc2028 */
 398
 399 int tm6000_tuner_callback(void *ptr, int component, int command, int arg)
 400 {
 401         int rc = 0;
 402         struct tm6000_core *dev = ptr;
 403
 404         if (dev->tuner_type != TUNER_XC2028)
 405                 return 0;
 406
 407         switch (command) {
 408         case XC2028_RESET_CLK:
 409                 tm6000_ir_wait(dev, 0);
 410
 411                 tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 412                                         0x02, arg);
 413                 msleep(10);
 414                 rc = tm6000_i2c_reset(dev, 10);
 415                 break;
 416         case XC2028_TUNER_RESET:
 417                 /* Reset codes during load firmware */
 418                 switch (arg) {
 419                 case 0:
 420                         /* newer tuner can faster reset */
 421                         switch (dev->model) {
 422                         case TM5600_BOARD_10MOONS_UT821:
 423                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 424                                                dev->gpio.tuner_reset, 0x01);
 425                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 426                                                0x300, 0x01);
 427                                 msleep(10);
 428                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 429                                                dev->gpio.tuner_reset, 0x00);
 430                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 431                                                0x300, 0x00);
 432                                 msleep(10);
 433                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 434                                                dev->gpio.tuner_reset, 0x01);
 435                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 436                                                0x300, 0x01);
 437                                 break;
 438                         case TM6010_BOARD_HAUPPAUGE_900H:
 439                         case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 440                         case TM6010_BOARD_TWINHAN_TU501:
 441                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 442                                                dev->gpio.tuner_reset, 0x01);
 443                                 msleep(60);
 444                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 445                                                dev->gpio.tuner_reset, 0x00);
 446                                 msleep(75);
 447                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 448                                                dev->gpio.tuner_reset, 0x01);
 449                                 msleep(60);
 450                                 break;
 451                         default:
 452                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 453                                                dev->gpio.tuner_reset, 0x00);
 454                                 msleep(130);
 455                                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 456                                                dev->gpio.tuner_reset, 0x01);
 457                                 msleep(130);
 458                                 break;
 459                         }
 460
 461                         tm6000_ir_wait(dev, 1);
 462                         break;
 463                 case 1:
 464                         tm6000_set_reg(dev, REQ_04_EN_DISABLE_MCU_INT,
 465                                                 0x02, 0x01);
 466                         msleep(10);
 467                         break;
 468                 case 2:
 469                         rc = tm6000_i2c_reset(dev, 100);
 470                         break;
 471                 }
 472         }
 473         return rc;
 474 }
 475 EXPORT_SYMBOL_GPL(tm6000_tuner_callback);
 476
 477 int tm6000_cards_setup(struct tm6000_core *dev)
 478 {
 479         int i, rc;
 480
 481         /*
 482          * Board-specific initialization sequence. Handles all GPIO
 483          * initialization sequences that are board-specific.
 484          * Up to now, all found devices use GPIO1 and GPIO4 at the same way.
 485          * Probably, they're all based on some reference device. Due to that,
 486          * there's a common routine at the end to handle those GPIO's. Devices
 487          * that use different pinups or init sequences can just return at
 488          * the board-specific session.
 489          */
 490         switch (dev->model) {
 491         case TM6010_BOARD_HAUPPAUGE_900H:
 492         case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 493         case TM6010_BOARD_TWINHAN_TU501:
 494         case TM6010_BOARD_GENERIC:
 495                 /* Turn xceive 3028 on */
 496                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.tuner_on, 0x01);
 497                 msleep(15);
 498                 /* Turn zarlink zl10353 on */
 499                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
 500                 msleep(15);
 501                 /* Reset zarlink zl10353 */
 502                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
 503                 msleep(50);
 504                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
 505                 msleep(15);
 506                 /* Turn zarlink zl10353 off */
 507                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x01);
 508                 msleep(15);
 509                 /* ir ? */
 510                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.ir, 0x01);
 511                 msleep(15);
 512                 /* Power led on (blue) */
 513                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x00);
 514                 msleep(15);
 515                 /* DVB led off (orange) */
 516                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.dvb_led, 0x01);
 517                 msleep(15);
 518                 /* Turn zarlink zl10353 on */
 519                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_on, 0x00);
 520                 msleep(15);
 521                 break;
 522         case TM6010_BOARD_BEHOLD_WANDER:
 523                 /* Power led on (blue) */
 524                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
 525                 msleep(15);
 526                 /* Reset zarlink zl10353 */
 527                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x00);
 528                 msleep(50);
 529                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.demod_reset, 0x01);
 530                 msleep(15);
 531                 break;
 532         case TM6010_BOARD_BEHOLD_VOYAGER:
 533                 /* Power led on (blue) */
 534                 tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN, dev->gpio.power_led, 0x01);
 535                 msleep(15);
 536                 break;
 537         default:
 538                 break;
 539         }
 540
 541         /*
 542          * Default initialization. Most of the devices seem to use GPIO1
 543          * and GPIO4.on the same way, so, this handles the common sequence
 544          * used by most devices.
 545          * If a device uses a different sequence or different GPIO pins for
 546          * reset, just add the code at the board-specific part
 547          */
 548
 549         if (dev->gpio.tuner_reset) {
 550                 for (i = 0; i < 2; i++) {
 551                         rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 552                                                 dev->gpio.tuner_reset, 0x00);
 553                         if (rc < 0) {
 554                                 printk(KERN_ERR "Error %i doing tuner reset\n", rc);
 555                                 return rc;
 556                         }
 557
 558                         msleep(10); /* Just to be conservative */
 559                         rc = tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 560                                                 dev->gpio.tuner_reset, 0x01);
 561                         if (rc < 0) {
 562                                 printk(KERN_ERR "Error %i doing tuner reset\n", rc);
 563                                 return rc;
 564                         }
 565                 }
 566         } else {
 567                 printk(KERN_ERR "Tuner reset is not configured\n");
 568                 return -1;
 569         }
 570
 571         msleep(50);
 572
 573         return 0;
 574 };
 575
 576 static void tm6000_config_tuner(struct tm6000_core *dev)
 577 {
 578         struct tuner_setup tun_setup;
 579
 580         /* Load tuner module */
 581         v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 582                 "tuner", dev->tuner_addr, NULL);
 583
 584         memset(&tun_setup, 0, sizeof(tun_setup));
 585         tun_setup.type = dev->tuner_type;
 586         tun_setup.addr = dev->tuner_addr;
 587
 588         tun_setup.mode_mask = 0;
 589         if (dev->caps.has_tuner)
 590                 tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
 591         if (dev->caps.has_dvb)
 592                 tun_setup.mode_mask |= T_DIGITAL_TV;
 593
 594         switch (dev->tuner_type) {
 595         case TUNER_XC2028:
 596                 tun_setup.tuner_callback = tm6000_tuner_callback;
 597                 break;
 598         case TUNER_XC5000:
 599                 tun_setup.tuner_callback = tm6000_xc5000_callback;
 600                 break;
 601         }
 602
 603         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_type_addr, &tun_setup);
 604
 605         switch (dev->tuner_type) {
 606         case TUNER_XC2028: {
 607                 struct v4l2_priv_tun_config xc2028_cfg;
 608                 struct xc2028_ctrl ctl;
 609
 610                 memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
 611                 memset(&ctl, 0, sizeof(ctl));
 612
 613                 ctl.input1 = 1;
 614                 ctl.read_not_reliable = 0;
 615                 ctl.msleep = 10;
 616                 ctl.demod = XC3028_FE_ZARLINK456;
 617                 ctl.vhfbw7 = 1;
 618                 ctl.uhfbw8 = 1;
 619                 xc2028_cfg.tuner = TUNER_XC2028;
 620                 xc2028_cfg.priv  = &ctl;
 621
 622                 switch (dev->model) {
 623                 case TM6010_BOARD_HAUPPAUGE_900H:
 624                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 625                 case TM6010_BOARD_TWINHAN_TU501:
 626                         ctl.fname = "xc3028L-v36.fw";
 627                         break;
 628                 default:
 629                         if (dev->dev_type == TM6010)
 630                                 ctl.fname = "xc3028-v27.fw";
 631                         else
 632                                 ctl.fname = "xc3028-v24.fw";
 633                 }
 634
 635                 printk(KERN_INFO "Setting firmware parameters for xc2028\n");
 636                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 637                                      &xc2028_cfg);
 638
 639                 }
 640                 break;
 641         case TUNER_XC5000:
 642                 {
 643                 struct v4l2_priv_tun_config  xc5000_cfg;
 644                 struct xc5000_config ctl = {
 645                         .i2c_address = dev->tuner_addr,
 646                         .if_khz      = 4570,
 647                         .radio_input = XC5000_RADIO_FM1,
 648                         };
 649
 650                 xc5000_cfg.tuner = TUNER_XC5000;
 651                 xc5000_cfg.priv  = &ctl;
 652
 653
 654                 v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_config,
 655                                      &xc5000_cfg);
 656                 }
 657                 break;
 658         default:
 659                 printk(KERN_INFO "Unknown tuner type. Tuner is not configured.\n");
 660                 break;
 661         }
 662 }
 663
 664 static int tm6000_init_dev(struct tm6000_core *dev)
 665 {
 666         struct v4l2_frequency f;
 667         int rc = 0;
 668
 669         mutex_init(&dev->lock);
 670
 671         mutex_lock(&dev->lock);
 672
 673         /* Initializa board-specific data */
 674         dev->dev_type   = tm6000_boards[dev->model].type;
 675         dev->tuner_type = tm6000_boards[dev->model].tuner_type;
 676         dev->tuner_addr = tm6000_boards[dev->model].tuner_addr;
 677
 678         dev->gpio = tm6000_boards[dev->model].gpio;
 679
 680         dev->ir_codes = tm6000_boards[dev->model].ir_codes;
 681
 682         dev->demod_addr = tm6000_boards[dev->model].demod_addr;
 683
 684         dev->caps = tm6000_boards[dev->model].caps;
 685
 686         /* initialize hardware */
 687         rc = tm6000_init(dev);
 688         if (rc < 0)
 689                 goto err;
 690
 691         rc = v4l2_device_register(&dev->udev->dev, &dev->v4l2_dev);
 692         if (rc < 0)
 693                 goto err;
 694
 695         /* register i2c bus */
 696         rc = tm6000_i2c_register(dev);
 697         if (rc < 0)
 698                 goto err;
 699
 700         /* Default values for STD and resolutions */
 701         dev->width = 720;
 702         dev->height = 480;
 703         dev->norm = V4L2_STD_PAL_M;
 704
 705         /* Configure tuner */
 706         tm6000_config_tuner(dev);
 707
 708         /* Set video standard */
 709         v4l2_device_call_all(&dev->v4l2_dev, 0, core, s_std, dev->norm);
 710
 711         /* Set tuner frequency - also loads firmware on xc2028/xc3028 */
 712         f.tuner = 0;
 713         f.type = V4L2_TUNER_ANALOG_TV;
 714         f.frequency = 3092;     /* 193.25 MHz */
 715         dev->freq = f.frequency;
 716         v4l2_device_call_all(&dev->v4l2_dev, 0, tuner, s_frequency, &f);
 717
 718         if (dev->caps.has_tda9874)
 719                 v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 720                         "tvaudio", I2C_ADDR_TDA9874, NULL);
 721
 722         /* register and initialize V4L2 */
 723         rc = tm6000_v4l2_register(dev);
 724         if (rc < 0)
 725                 goto err;
 726
 727         tm6000_add_into_devlist(dev);
 728         tm6000_init_extension(dev);
 729
 730         tm6000_ir_init(dev);
 731
 732         mutex_unlock(&dev->lock);
 733         return 0;
 734
 735 err:
 736         mutex_unlock(&dev->lock);
 737         return rc;
 738 }
 739
 740 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
 741 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
 742
 743 static void get_max_endpoint(struct usb_device *udev,
 744                              struct usb_host_interface *alt,
 745                              char *msgtype,
 746                              struct usb_host_endpoint *curr_e,
 747                              struct tm6000_endpoint *tm_ep)
 748 {
 749         u16 tmp = le16_to_cpu(curr_e->desc.wMaxPacketSize);
 750         unsigned int size = tmp & 0x7ff;
 751
 752         if (udev->speed == USB_SPEED_HIGH)
 753                 size = size * hb_mult(tmp);
 754
 755         if (size > tm_ep->maxsize) {
 756                 tm_ep->endp = curr_e;
 757                 tm_ep->maxsize = size;
 758                 tm_ep->bInterfaceNumber = alt->desc.bInterfaceNumber;
 759                 tm_ep->bAlternateSetting = alt->desc.bAlternateSetting;
 760
 761                 printk(KERN_INFO "tm6000: %s endpoint: 0x%02x (max size=%u bytes)\n",
 762                                         msgtype, curr_e->desc.bEndpointAddress,
 763                                         size);
 764         }
 765 }
 766
 767 /*
 768  * tm6000_usb_probe()
 769  * checks for supported devices
 770  */
 771 static int tm6000_usb_probe(struct usb_interface *interface,
 772                             const struct usb_device_id *id)
 773 {
 774         struct usb_device *usbdev;
 775         struct tm6000_core *dev = NULL;
 776         int i, rc = 0;
 777         int nr = 0;
 778         char *speed;
 779
 780         usbdev = usb_get_dev(interface_to_usbdev(interface));
 781
 782         /* Selects the proper interface */
 783         rc = usb_set_interface(usbdev, 0, 1);
 784         if (rc < 0)
 785                 goto err;
 786
 787         /* Check to see next free device and mark as used */
 788         nr = find_first_zero_bit(&tm6000_devused, TM6000_MAXBOARDS);
 789         if (nr >= TM6000_MAXBOARDS) {
 790                 printk(KERN_ERR "tm6000: Supports only %i tm60xx boards.\n", TM6000_MAXBOARDS);
 791                 usb_put_dev(usbdev);
 792                 return -ENOMEM;
 793         }
 794
 795         /* Create and initialize dev struct */
 796         dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 797         if (dev == NULL) {
 798                 printk(KERN_ERR "tm6000" ": out of memory!\n");
 799                 usb_put_dev(usbdev);
 800                 return -ENOMEM;
 801         }
 802         spin_lock_init(&dev->slock);
 803
 804         /* Increment usage count */
 805         tm6000_devused |= 1<<nr;
 806         snprintf(dev->name, 29, "tm6000 #%d", nr);
 807
 808         dev->model = id->driver_info;
 809         if ((card[nr] >= 0) && (card[nr] < ARRAY_SIZE(tm6000_boards)))
 810                 dev->model = card[nr];
 811
 812         dev->udev = usbdev;
 813         dev->devno = nr;
 814
 815         switch (usbdev->speed) {
 816         case USB_SPEED_LOW:
 817                 speed = "1.5";
 818                 break;
 819         case USB_SPEED_UNKNOWN:
 820         case USB_SPEED_FULL:
 821                 speed = "12";
 822                 break;
 823         case USB_SPEED_HIGH:
 824                 speed = "480";
 825                 break;
 826         default:
 827                 speed = "unknown";
 828         }
 829
 830
 831
 832         /* Get endpoints */
 833         for (i = 0; i < interface->num_altsetting; i++) {
 834                 int ep;
 835
 836                 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) {
 837                         struct usb_host_endpoint        *e;
 838                         int dir_out;
 839
 840                         e = &interface->altsetting[i].endpoint[ep];
 841
 842                         dir_out = ((e->desc.bEndpointAddress &
 843                                         USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT);
 844
 845                         printk(KERN_INFO "tm6000: alt %d, interface %i, class %i\n",
 846                                i,
 847                                interface->altsetting[i].desc.bInterfaceNumber,
 848                                interface->altsetting[i].desc.bInterfaceClass);
 849
 850                         switch (e->desc.bmAttributes) {
 851                         case USB_ENDPOINT_XFER_BULK:
 852                                 if (!dir_out) {
 853                                         get_max_endpoint(usbdev,
 854                                                          &interface->altsetting[i],
 855                                                          "Bulk IN", e,
 856                                                          &dev->bulk_in);
 857                                 } else {
 858                                         get_max_endpoint(usbdev,
 859                                                          &interface->altsetting[i],
 860                                                          "Bulk OUT", e,
 861                                                          &dev->bulk_out);
 862                                 }
 863                                 break;
 864                         case USB_ENDPOINT_XFER_ISOC:
 865                                 if (!dir_out) {
 866                                         get_max_endpoint(usbdev,
 867                                                          &interface->altsetting[i],
 868                                                          "ISOC IN", e,
 869                                                          &dev->isoc_in);
 870                                 } else {
 871                                         get_max_endpoint(usbdev,
 872                                                          &interface->altsetting[i],
 873                                                          "ISOC OUT", e,
 874                                                          &dev->isoc_out);
 875                                 }
 876                                 break;
 877                         case USB_ENDPOINT_XFER_INT:
 878                                 if (!dir_out) {
 879                                         get_max_endpoint(usbdev,
 880                                                         &interface->altsetting[i],
 881                                                         "INT IN", e,
 882                                                         &dev->int_in);
 883                                 } else {
 884                                         get_max_endpoint(usbdev,
 885                                                         &interface->altsetting[i],
 886                                                         "INT OUT", e,
 887                                                         &dev->int_out);
 888                                 }
 889                                 break;
 890                         }
 891                 }
 892         }
 893
 894
 895         printk(KERN_INFO "tm6000: New video device @ %s Mbps (%04x:%04x, ifnum %d)\n",
 896                 speed,
 897                 le16_to_cpu(dev->udev->descriptor.idVendor),
 898                 le16_to_cpu(dev->udev->descriptor.idProduct),
 899                 interface->altsetting->desc.bInterfaceNumber);
 900
 901 /* check if the the device has the iso in endpoint at the correct place */
 902         if (!dev->isoc_in.endp) {
 903                 printk(KERN_ERR "tm6000: probing error: no IN ISOC endpoint!\n");
 904                 rc = -ENODEV;
 905
 906                 goto err;
 907         }
 908
 909         /* save our data pointer in this interface device */
 910         usb_set_intfdata(interface, dev);
 911
 912         printk(KERN_INFO "tm6000: Found %s\n", tm6000_boards[dev->model].name);
 913
 914         rc = tm6000_init_dev(dev);
 915
 916         if (rc < 0)
 917                 goto err;
 918
 919         return 0;
 920
 921 err:
 922         printk(KERN_ERR "tm6000: Error %d while registering\n", rc);
 923
 924         tm6000_devused &= ~(1<<nr);
 925         usb_put_dev(usbdev);
 926
 927         kfree(dev);
 928         return rc;
 929 }
 930
 931 /*
 932  * tm6000_usb_disconnect()
 933  * called when the device gets diconencted
 934  * video device will be unregistered on v4l2_close in case it is still open
 935  */
 936 static void tm6000_usb_disconnect(struct usb_interface *interface)
 937 {
 938         struct tm6000_core *dev = usb_get_intfdata(interface);
 939         usb_set_intfdata(interface, NULL);
 940
 941         if (!dev)
 942                 return;
 943
 944         printk(KERN_INFO "tm6000: disconnecting %s\n", dev->name);
 945
 946         tm6000_ir_fini(dev);
 947
 948         if (dev->gpio.power_led) {
 949                 switch (dev->model) {
 950                 case TM6010_BOARD_HAUPPAUGE_900H:
 951                 case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE:
 952                 case TM6010_BOARD_TWINHAN_TU501:
 953                         /* Power led off */
 954                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 955                                 dev->gpio.power_led, 0x01);
 956                         msleep(15);
 957                         break;
 958                 case TM6010_BOARD_BEHOLD_WANDER:
 959                 case TM6010_BOARD_BEHOLD_VOYAGER:
 960                         /* Power led off */
 961                         tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
 962                                 dev->gpio.power_led, 0x00);
 963                         msleep(15);
 964                         break;
 965                 }
 966         }
 967         tm6000_v4l2_unregister(dev);
 968
 969         tm6000_i2c_unregister(dev);
 970
 971         v4l2_device_unregister(&dev->v4l2_dev);
 972
 973         dev->state |= DEV_DISCONNECTED;
 974
 975         usb_put_dev(dev->udev);
 976
 977         tm6000_close_extension(dev);
 978         tm6000_remove_from_devlist(dev);
 979
 980         kfree(dev);
 981 }
 982
 983 static struct usb_driver tm6000_usb_driver = {
 984                 .name = "tm6000",
 985                 .probe = tm6000_usb_probe,
 986                 .disconnect = tm6000_usb_disconnect,
 987                 .id_table = tm6000_id_table,
 988 };
 989
 990 static int __init tm6000_module_init(void)
 991 {
 992         int result;
 993
 994         printk(KERN_INFO "tm6000" " v4l2 driver version %d.%d.%d loaded\n",
 995                (TM6000_VERSION  >> 16) & 0xff,
 996                (TM6000_VERSION  >> 8) & 0xff, TM6000_VERSION  & 0xff);
 997
 998         /* register this driver with the USB subsystem */
 999         result = usb_register(&tm6000_usb_driver);
1000         if (result)
1001                 printk(KERN_ERR "tm6000"
1002                            " usb_register failed. Error number %d.\n", result);
1003
1004         return result;
1005 }
1006
1007 static void __exit tm6000_module_exit(void)
1008 {
1009         /* deregister at USB subsystem */
1010         usb_deregister(&tm6000_usb_driver);
1011 }
1012
1013 module_init(tm6000_module_init);
1014 module_exit(tm6000_module_exit);
1015
1016 MODULE_DESCRIPTION("Trident TVMaster TM5600/TM6000/TM6010 USB2 adapter");
1017 MODULE_AUTHOR("Mauro Carvalho Chehab");
1018 MODULE_LICENSE("GPL");