2 * Serial Port driver for Open Firmware platform devices
4 * Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version
9 * 2 of the License, or (at your option) any later version.
12 #include <linux/console.h>
13 #include <linux/module.h>
14 #include <linux/slab.h>
15 #include <linux/delay.h>
16 #include <linux/serial_core.h>
17 #include <linux/serial_reg.h>
18 #include <linux/of_address.h>
19 #include <linux/of_irq.h>
20 #include <linux/of_platform.h>
21 #include <linux/nwpserial.h>
22 #include <linux/clk.h>
24 #include "8250/8250.h"
26 struct of_serial_info {
32 #ifdef CONFIG_ARCH_TEGRA
33 void tegra_serial_handle_break(struct uart_port *p)
35 unsigned int status, tmout = 10000;
38 status = p->serial_in(p, UART_LSR);
39 if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS))
40 status = p->serial_in(p, UART_RX);
49 static inline void tegra_serial_handle_break(struct uart_port *port)
55 * Fill a struct uart_port for a given device node
57 static int of_platform_serial_setup(struct platform_device *ofdev,
58 int type, struct uart_port *port,
59 struct of_serial_info *info)
61 struct resource resource;
62 struct device_node *np = ofdev->dev.of_node;
66 memset(port, 0, sizeof *port);
67 if (of_property_read_u32(np, "clock-frequency", &clk)) {
69 /* Get clk rate through clk driver if present */
70 info->clk = clk_get(&ofdev->dev, NULL);
71 if (IS_ERR(info->clk)) {
73 "clk or clock-frequency not defined\n");
74 return PTR_ERR(info->clk);
77 clk_prepare_enable(info->clk);
78 clk = clk_get_rate(info->clk);
80 /* If current-speed was set, then try not to change it. */
81 if (of_property_read_u32(np, "current-speed", &spd) == 0)
82 port->custom_divisor = clk / (16 * spd);
84 ret = of_address_to_resource(np, 0, &resource);
86 dev_warn(&ofdev->dev, "invalid address\n");
90 spin_lock_init(&port->lock);
91 port->mapbase = resource.start;
93 /* Check for shifted address mapping */
94 if (of_property_read_u32(np, "reg-offset", &prop) == 0)
95 port->mapbase += prop;
97 /* Check for registers offset within the devices address range */
98 if (of_property_read_u32(np, "reg-shift", &prop) == 0)
99 port->regshift = prop;
101 /* Check for fifo size */
102 if (of_property_read_u32(np, "fifo-size", &prop) == 0)
103 port->fifosize = prop;
105 port->irq = irq_of_parse_and_map(np, 0);
106 port->iotype = UPIO_MEM;
107 if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
110 port->iotype = UPIO_MEM;
113 port->iotype = UPIO_MEM32;
116 dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n",
125 port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
126 | UPF_FIXED_PORT | UPF_FIXED_TYPE;
128 if (of_find_property(np, "no-loopback-test", NULL))
129 port->flags |= UPF_SKIP_TEST;
131 port->dev = &ofdev->dev;
135 port->handle_break = tegra_serial_handle_break;
139 port->iotype = UPIO_AU;
146 clk_disable_unprepare(info->clk);
151 * Try to register a serial port
153 static struct of_device_id of_platform_serial_table[];
154 static int of_platform_serial_probe(struct platform_device *ofdev)
156 const struct of_device_id *match;
157 struct of_serial_info *info;
158 struct uart_port port;
162 match = of_match_device(of_platform_serial_table, &ofdev->dev);
166 if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
169 info = kzalloc(sizeof(*info), GFP_KERNEL);
173 port_type = (unsigned long)match->data;
174 ret = of_platform_serial_setup(ofdev, port_type, &port, info);
179 #ifdef CONFIG_SERIAL_8250
180 case PORT_8250 ... PORT_MAX_8250:
182 struct uart_8250_port port8250;
183 memset(&port8250, 0, sizeof(port8250));
184 port.type = port_type;
185 port8250.port = port;
188 port8250.capabilities = UART_CAP_FIFO;
190 if (of_property_read_bool(ofdev->dev.of_node,
191 "auto-flow-control"))
192 port8250.capabilities |= UART_CAP_AFE;
194 ret = serial8250_register_8250_port(&port8250);
198 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
200 ret = nwpserial_register_port(&port);
204 /* need to add code for these */
206 dev_info(&ofdev->dev, "Unknown serial port found, ignored\n");
213 info->type = port_type;
215 platform_set_drvdata(ofdev, info);
219 irq_dispose_mapping(port.irq);
226 static int of_platform_serial_remove(struct platform_device *ofdev)
228 struct of_serial_info *info = platform_get_drvdata(ofdev);
229 switch (info->type) {
230 #ifdef CONFIG_SERIAL_8250
231 case PORT_8250 ... PORT_MAX_8250:
232 serial8250_unregister_port(info->line);
235 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
237 nwpserial_unregister_port(info->line);
241 /* need to add code for these */
246 clk_disable_unprepare(info->clk);
251 #ifdef CONFIG_PM_SLEEP
252 #ifdef CONFIG_SERIAL_8250
253 static void of_serial_suspend_8250(struct of_serial_info *info)
255 struct uart_8250_port *port8250 = serial8250_get_port(info->line);
256 struct uart_port *port = &port8250->port;
258 serial8250_suspend_port(info->line);
259 if (info->clk && (!uart_console(port) || console_suspend_enabled))
260 clk_disable_unprepare(info->clk);
263 static void of_serial_resume_8250(struct of_serial_info *info)
265 struct uart_8250_port *port8250 = serial8250_get_port(info->line);
266 struct uart_port *port = &port8250->port;
268 if (info->clk && (!uart_console(port) || console_suspend_enabled))
269 clk_prepare_enable(info->clk);
271 serial8250_resume_port(info->line);
274 static inline void of_serial_suspend_8250(struct of_serial_info *info)
278 static inline void of_serial_resume_8250(struct of_serial_info *info)
283 static int of_serial_suspend(struct device *dev)
285 struct of_serial_info *info = dev_get_drvdata(dev);
287 switch (info->type) {
288 case PORT_8250 ... PORT_MAX_8250:
289 of_serial_suspend_8250(info);
298 static int of_serial_resume(struct device *dev)
300 struct of_serial_info *info = dev_get_drvdata(dev);
302 switch (info->type) {
303 case PORT_8250 ... PORT_MAX_8250:
304 of_serial_resume_8250(info);
313 static SIMPLE_DEV_PM_OPS(of_serial_pm_ops, of_serial_suspend, of_serial_resume);
316 * A few common types, add more as needed.
318 static struct of_device_id of_platform_serial_table[] = {
319 { .compatible = "ns8250", .data = (void *)PORT_8250, },
320 { .compatible = "ns16450", .data = (void *)PORT_16450, },
321 { .compatible = "ns16550a", .data = (void *)PORT_16550A, },
322 { .compatible = "ns16550", .data = (void *)PORT_16550, },
323 { .compatible = "ns16750", .data = (void *)PORT_16750, },
324 { .compatible = "ns16850", .data = (void *)PORT_16850, },
325 { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, },
326 { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, },
327 { .compatible = "ralink,rt2880-uart", .data = (void *)PORT_RT2880, },
328 { .compatible = "altr,16550-FIFO32",
329 .data = (void *)PORT_ALTR_16550_F32, },
330 { .compatible = "altr,16550-FIFO64",
331 .data = (void *)PORT_ALTR_16550_F64, },
332 { .compatible = "altr,16550-FIFO128",
333 .data = (void *)PORT_ALTR_16550_F128, },
334 #ifdef CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL
335 { .compatible = "ibm,qpace-nwp-serial",
336 .data = (void *)PORT_NWPSERIAL, },
338 { .type = "serial", .data = (void *)PORT_UNKNOWN, },
339 { /* end of list */ },
342 static struct platform_driver of_platform_serial_driver = {
345 .of_match_table = of_platform_serial_table,
347 .probe = of_platform_serial_probe,
348 .remove = of_platform_serial_remove,
351 module_platform_driver(of_platform_serial_driver);
353 MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>");
354 MODULE_LICENSE("GPL");
355 MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices");