2 * SuperH on-chip serial module support. (SCI with no FIFO / with FIFO)
4 * Copyright (C) 2002 - 2011 Paul Mundt
5 * Modified to support SH7720 SCIF. Markus Brunner, Mark Jonas (Jul 2007).
7 * based off of the old drivers/char/sh-sci.c by:
9 * Copyright (C) 1999, 2000 Niibe Yutaka
10 * Copyright (C) 2000 Sugioka Toshinobu
11 * Modified to support multiple serial ports. Stuart Menefy (May 2000).
12 * Modified to support SecureEdge. David McCullough (2002)
13 * Modified to support SH7300 SCIF. Takashi Kusuda (Jun 2003).
14 * Removed SH7300 support (Jul 2007).
16 * This file is subject to the terms and conditions of the GNU General Public
17 * License. See the file "COPYING" in the main directory of this archive
20 #if defined(CONFIG_SERIAL_SH_SCI_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
26 #include <linux/clk.h>
27 #include <linux/console.h>
28 #include <linux/ctype.h>
29 #include <linux/cpufreq.h>
30 #include <linux/delay.h>
31 #include <linux/dmaengine.h>
32 #include <linux/dma-mapping.h>
33 #include <linux/err.h>
34 #include <linux/errno.h>
35 #include <linux/init.h>
36 #include <linux/interrupt.h>
37 #include <linux/ioport.h>
38 #include <linux/major.h>
39 #include <linux/module.h>
41 #include <linux/notifier.h>
43 #include <linux/platform_device.h>
44 #include <linux/pm_runtime.h>
45 #include <linux/scatterlist.h>
46 #include <linux/serial.h>
47 #include <linux/serial_sci.h>
48 #include <linux/sh_dma.h>
49 #include <linux/slab.h>
50 #include <linux/string.h>
51 #include <linux/sysrq.h>
52 #include <linux/timer.h>
53 #include <linux/tty.h>
54 #include <linux/tty_flip.h>
57 #include <asm/sh_bios.h>
62 /* Offsets into the sci_port->irqs array */
70 SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */
73 #define SCIx_IRQ_IS_MUXED(port) \
74 ((port)->irqs[SCIx_ERI_IRQ] == \
75 (port)->irqs[SCIx_RXI_IRQ]) || \
76 ((port)->irqs[SCIx_ERI_IRQ] && \
77 ((port)->irqs[SCIx_RXI_IRQ] < 0))
80 struct uart_port port;
82 /* Platform configuration */
83 struct plat_sci_port *cfg;
85 unsigned int error_mask;
86 unsigned int sampling_rate;
90 struct timer_list break_timer;
98 int irqs[SCIx_NR_IRQS];
99 char *irqstr[SCIx_NR_IRQS];
101 struct dma_chan *chan_tx;
102 struct dma_chan *chan_rx;
104 #ifdef CONFIG_SERIAL_SH_SCI_DMA
105 struct dma_async_tx_descriptor *desc_tx;
106 struct dma_async_tx_descriptor *desc_rx[2];
107 dma_cookie_t cookie_tx;
108 dma_cookie_t cookie_rx[2];
109 dma_cookie_t active_rx;
110 struct scatterlist sg_tx;
111 unsigned int sg_len_tx;
112 struct scatterlist sg_rx[2];
114 struct sh_dmae_slave param_tx;
115 struct sh_dmae_slave param_rx;
116 struct work_struct work_tx;
117 struct work_struct work_rx;
118 struct timer_list rx_timer;
119 unsigned int rx_timeout;
122 struct notifier_block freq_transition;
125 /* Function prototypes */
126 static void sci_start_tx(struct uart_port *port);
127 static void sci_stop_tx(struct uart_port *port);
128 static void sci_start_rx(struct uart_port *port);
130 #define SCI_NPORTS CONFIG_SERIAL_SH_SCI_NR_UARTS
132 static struct sci_port sci_ports[SCI_NPORTS];
133 static struct uart_driver sci_uart_driver;
135 static inline struct sci_port *
136 to_sci_port(struct uart_port *uart)
138 return container_of(uart, struct sci_port, port);
141 struct plat_sci_reg {
145 /* Helper for invalidating specific entries of an inherited map. */
146 #define sci_reg_invalid { .offset = 0, .size = 0 }
148 static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
149 [SCIx_PROBE_REGTYPE] = {
150 [0 ... SCIx_NR_REGS - 1] = sci_reg_invalid,
154 * Common SCI definitions, dependent on the port's regshift
157 [SCIx_SCI_REGTYPE] = {
158 [SCSMR] = { 0x00, 8 },
159 [SCBRR] = { 0x01, 8 },
160 [SCSCR] = { 0x02, 8 },
161 [SCxTDR] = { 0x03, 8 },
162 [SCxSR] = { 0x04, 8 },
163 [SCxRDR] = { 0x05, 8 },
164 [SCFCR] = sci_reg_invalid,
165 [SCFDR] = sci_reg_invalid,
166 [SCTFDR] = sci_reg_invalid,
167 [SCRFDR] = sci_reg_invalid,
168 [SCSPTR] = sci_reg_invalid,
169 [SCLSR] = sci_reg_invalid,
170 [HSSRR] = sci_reg_invalid,
174 * Common definitions for legacy IrDA ports, dependent on
177 [SCIx_IRDA_REGTYPE] = {
178 [SCSMR] = { 0x00, 8 },
179 [SCBRR] = { 0x01, 8 },
180 [SCSCR] = { 0x02, 8 },
181 [SCxTDR] = { 0x03, 8 },
182 [SCxSR] = { 0x04, 8 },
183 [SCxRDR] = { 0x05, 8 },
184 [SCFCR] = { 0x06, 8 },
185 [SCFDR] = { 0x07, 16 },
186 [SCTFDR] = sci_reg_invalid,
187 [SCRFDR] = sci_reg_invalid,
188 [SCSPTR] = sci_reg_invalid,
189 [SCLSR] = sci_reg_invalid,
190 [HSSRR] = sci_reg_invalid,
194 * Common SCIFA definitions.
196 [SCIx_SCIFA_REGTYPE] = {
197 [SCSMR] = { 0x00, 16 },
198 [SCBRR] = { 0x04, 8 },
199 [SCSCR] = { 0x08, 16 },
200 [SCxTDR] = { 0x20, 8 },
201 [SCxSR] = { 0x14, 16 },
202 [SCxRDR] = { 0x24, 8 },
203 [SCFCR] = { 0x18, 16 },
204 [SCFDR] = { 0x1c, 16 },
205 [SCTFDR] = sci_reg_invalid,
206 [SCRFDR] = sci_reg_invalid,
207 [SCSPTR] = sci_reg_invalid,
208 [SCLSR] = sci_reg_invalid,
209 [HSSRR] = sci_reg_invalid,
213 * Common SCIFB definitions.
215 [SCIx_SCIFB_REGTYPE] = {
216 [SCSMR] = { 0x00, 16 },
217 [SCBRR] = { 0x04, 8 },
218 [SCSCR] = { 0x08, 16 },
219 [SCxTDR] = { 0x40, 8 },
220 [SCxSR] = { 0x14, 16 },
221 [SCxRDR] = { 0x60, 8 },
222 [SCFCR] = { 0x18, 16 },
223 [SCFDR] = sci_reg_invalid,
224 [SCTFDR] = { 0x38, 16 },
225 [SCRFDR] = { 0x3c, 16 },
226 [SCSPTR] = sci_reg_invalid,
227 [SCLSR] = sci_reg_invalid,
228 [HSSRR] = sci_reg_invalid,
232 * Common SH-2(A) SCIF definitions for ports with FIFO data
235 [SCIx_SH2_SCIF_FIFODATA_REGTYPE] = {
236 [SCSMR] = { 0x00, 16 },
237 [SCBRR] = { 0x04, 8 },
238 [SCSCR] = { 0x08, 16 },
239 [SCxTDR] = { 0x0c, 8 },
240 [SCxSR] = { 0x10, 16 },
241 [SCxRDR] = { 0x14, 8 },
242 [SCFCR] = { 0x18, 16 },
243 [SCFDR] = { 0x1c, 16 },
244 [SCTFDR] = sci_reg_invalid,
245 [SCRFDR] = sci_reg_invalid,
246 [SCSPTR] = { 0x20, 16 },
247 [SCLSR] = { 0x24, 16 },
248 [HSSRR] = sci_reg_invalid,
252 * Common SH-3 SCIF definitions.
254 [SCIx_SH3_SCIF_REGTYPE] = {
255 [SCSMR] = { 0x00, 8 },
256 [SCBRR] = { 0x02, 8 },
257 [SCSCR] = { 0x04, 8 },
258 [SCxTDR] = { 0x06, 8 },
259 [SCxSR] = { 0x08, 16 },
260 [SCxRDR] = { 0x0a, 8 },
261 [SCFCR] = { 0x0c, 8 },
262 [SCFDR] = { 0x0e, 16 },
263 [SCTFDR] = sci_reg_invalid,
264 [SCRFDR] = sci_reg_invalid,
265 [SCSPTR] = sci_reg_invalid,
266 [SCLSR] = sci_reg_invalid,
267 [HSSRR] = sci_reg_invalid,
271 * Common SH-4(A) SCIF(B) definitions.
273 [SCIx_SH4_SCIF_REGTYPE] = {
274 [SCSMR] = { 0x00, 16 },
275 [SCBRR] = { 0x04, 8 },
276 [SCSCR] = { 0x08, 16 },
277 [SCxTDR] = { 0x0c, 8 },
278 [SCxSR] = { 0x10, 16 },
279 [SCxRDR] = { 0x14, 8 },
280 [SCFCR] = { 0x18, 16 },
281 [SCFDR] = { 0x1c, 16 },
282 [SCTFDR] = sci_reg_invalid,
283 [SCRFDR] = sci_reg_invalid,
284 [SCSPTR] = { 0x20, 16 },
285 [SCLSR] = { 0x24, 16 },
286 [HSSRR] = sci_reg_invalid,
290 * Common HSCIF definitions.
292 [SCIx_HSCIF_REGTYPE] = {
293 [SCSMR] = { 0x00, 16 },
294 [SCBRR] = { 0x04, 8 },
295 [SCSCR] = { 0x08, 16 },
296 [SCxTDR] = { 0x0c, 8 },
297 [SCxSR] = { 0x10, 16 },
298 [SCxRDR] = { 0x14, 8 },
299 [SCFCR] = { 0x18, 16 },
300 [SCFDR] = { 0x1c, 16 },
301 [SCTFDR] = sci_reg_invalid,
302 [SCRFDR] = sci_reg_invalid,
303 [SCSPTR] = { 0x20, 16 },
304 [SCLSR] = { 0x24, 16 },
305 [HSSRR] = { 0x40, 16 },
309 * Common SH-4(A) SCIF(B) definitions for ports without an SCSPTR
312 [SCIx_SH4_SCIF_NO_SCSPTR_REGTYPE] = {
313 [SCSMR] = { 0x00, 16 },
314 [SCBRR] = { 0x04, 8 },
315 [SCSCR] = { 0x08, 16 },
316 [SCxTDR] = { 0x0c, 8 },
317 [SCxSR] = { 0x10, 16 },
318 [SCxRDR] = { 0x14, 8 },
319 [SCFCR] = { 0x18, 16 },
320 [SCFDR] = { 0x1c, 16 },
321 [SCTFDR] = sci_reg_invalid,
322 [SCRFDR] = sci_reg_invalid,
323 [SCSPTR] = sci_reg_invalid,
324 [SCLSR] = { 0x24, 16 },
325 [HSSRR] = sci_reg_invalid,
329 * Common SH-4(A) SCIF(B) definitions for ports with FIFO data
332 [SCIx_SH4_SCIF_FIFODATA_REGTYPE] = {
333 [SCSMR] = { 0x00, 16 },
334 [SCBRR] = { 0x04, 8 },
335 [SCSCR] = { 0x08, 16 },
336 [SCxTDR] = { 0x0c, 8 },
337 [SCxSR] = { 0x10, 16 },
338 [SCxRDR] = { 0x14, 8 },
339 [SCFCR] = { 0x18, 16 },
340 [SCFDR] = { 0x1c, 16 },
341 [SCTFDR] = { 0x1c, 16 }, /* aliased to SCFDR */
342 [SCRFDR] = { 0x20, 16 },
343 [SCSPTR] = { 0x24, 16 },
344 [SCLSR] = { 0x28, 16 },
345 [HSSRR] = sci_reg_invalid,
349 * SH7705-style SCIF(B) ports, lacking both SCSPTR and SCLSR
352 [SCIx_SH7705_SCIF_REGTYPE] = {
353 [SCSMR] = { 0x00, 16 },
354 [SCBRR] = { 0x04, 8 },
355 [SCSCR] = { 0x08, 16 },
356 [SCxTDR] = { 0x20, 8 },
357 [SCxSR] = { 0x14, 16 },
358 [SCxRDR] = { 0x24, 8 },
359 [SCFCR] = { 0x18, 16 },
360 [SCFDR] = { 0x1c, 16 },
361 [SCTFDR] = sci_reg_invalid,
362 [SCRFDR] = sci_reg_invalid,
363 [SCSPTR] = sci_reg_invalid,
364 [SCLSR] = sci_reg_invalid,
365 [HSSRR] = sci_reg_invalid,
369 #define sci_getreg(up, offset) (sci_regmap[to_sci_port(up)->cfg->regtype] + offset)
372 * The "offset" here is rather misleading, in that it refers to an enum
373 * value relative to the port mapping rather than the fixed offset
374 * itself, which needs to be manually retrieved from the platform's
375 * register map for the given port.
377 static unsigned int sci_serial_in(struct uart_port *p, int offset)
379 struct plat_sci_reg *reg = sci_getreg(p, offset);
382 return ioread8(p->membase + (reg->offset << p->regshift));
383 else if (reg->size == 16)
384 return ioread16(p->membase + (reg->offset << p->regshift));
386 WARN(1, "Invalid register access\n");
391 static void sci_serial_out(struct uart_port *p, int offset, int value)
393 struct plat_sci_reg *reg = sci_getreg(p, offset);
396 iowrite8(value, p->membase + (reg->offset << p->regshift));
397 else if (reg->size == 16)
398 iowrite16(value, p->membase + (reg->offset << p->regshift));
400 WARN(1, "Invalid register access\n");
403 static int sci_probe_regmap(struct plat_sci_port *cfg)
407 cfg->regtype = SCIx_SCI_REGTYPE;
410 cfg->regtype = SCIx_IRDA_REGTYPE;
413 cfg->regtype = SCIx_SCIFA_REGTYPE;
416 cfg->regtype = SCIx_SCIFB_REGTYPE;
420 * The SH-4 is a bit of a misnomer here, although that's
421 * where this particular port layout originated. This
422 * configuration (or some slight variation thereof)
423 * remains the dominant model for all SCIFs.
425 cfg->regtype = SCIx_SH4_SCIF_REGTYPE;
428 cfg->regtype = SCIx_HSCIF_REGTYPE;
431 pr_err("Can't probe register map for given port\n");
438 static void sci_port_enable(struct sci_port *sci_port)
440 if (!sci_port->port.dev)
443 pm_runtime_get_sync(sci_port->port.dev);
445 clk_prepare_enable(sci_port->iclk);
446 sci_port->port.uartclk = clk_get_rate(sci_port->iclk);
447 clk_prepare_enable(sci_port->fclk);
450 static void sci_port_disable(struct sci_port *sci_port)
452 if (!sci_port->port.dev)
455 /* Cancel the break timer to ensure that the timer handler will not try
456 * to access the hardware with clocks and power disabled. Reset the
457 * break flag to make the break debouncing state machine ready for the
460 del_timer_sync(&sci_port->break_timer);
461 sci_port->break_flag = 0;
463 clk_disable_unprepare(sci_port->fclk);
464 clk_disable_unprepare(sci_port->iclk);
466 pm_runtime_put_sync(sci_port->port.dev);
469 #if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_SH_SCI_CONSOLE)
471 #ifdef CONFIG_CONSOLE_POLL
472 static int sci_poll_get_char(struct uart_port *port)
474 unsigned short status;
478 status = serial_port_in(port, SCxSR);
479 if (status & SCxSR_ERRORS(port)) {
480 serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
486 if (!(status & SCxSR_RDxF(port)))
489 c = serial_port_in(port, SCxRDR);
492 serial_port_in(port, SCxSR);
493 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
499 static void sci_poll_put_char(struct uart_port *port, unsigned char c)
501 unsigned short status;
504 status = serial_port_in(port, SCxSR);
505 } while (!(status & SCxSR_TDxE(port)));
507 serial_port_out(port, SCxTDR, c);
508 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port) & ~SCxSR_TEND(port));
510 #endif /* CONFIG_CONSOLE_POLL || CONFIG_SERIAL_SH_SCI_CONSOLE */
512 static void sci_init_pins(struct uart_port *port, unsigned int cflag)
514 struct sci_port *s = to_sci_port(port);
515 struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
518 * Use port-specific handler if provided.
520 if (s->cfg->ops && s->cfg->ops->init_pins) {
521 s->cfg->ops->init_pins(port, cflag);
526 * For the generic path SCSPTR is necessary. Bail out if that's
532 if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) &&
533 ((!(cflag & CRTSCTS)))) {
534 unsigned short status;
536 status = serial_port_in(port, SCSPTR);
537 status &= ~SCSPTR_CTSIO;
538 status |= SCSPTR_RTSIO;
539 serial_port_out(port, SCSPTR, status); /* Set RTS = 1 */
543 static int sci_txfill(struct uart_port *port)
545 struct plat_sci_reg *reg;
547 reg = sci_getreg(port, SCTFDR);
549 return serial_port_in(port, SCTFDR) & ((port->fifosize << 1) - 1);
551 reg = sci_getreg(port, SCFDR);
553 return serial_port_in(port, SCFDR) >> 8;
555 return !(serial_port_in(port, SCxSR) & SCI_TDRE);
558 static int sci_txroom(struct uart_port *port)
560 return port->fifosize - sci_txfill(port);
563 static int sci_rxfill(struct uart_port *port)
565 struct plat_sci_reg *reg;
567 reg = sci_getreg(port, SCRFDR);
569 return serial_port_in(port, SCRFDR) & ((port->fifosize << 1) - 1);
571 reg = sci_getreg(port, SCFDR);
573 return serial_port_in(port, SCFDR) & ((port->fifosize << 1) - 1);
575 return (serial_port_in(port, SCxSR) & SCxSR_RDxF(port)) != 0;
579 * SCI helper for checking the state of the muxed port/RXD pins.
581 static inline int sci_rxd_in(struct uart_port *port)
583 struct sci_port *s = to_sci_port(port);
585 if (s->cfg->port_reg <= 0)
588 /* Cast for ARM damage */
589 return !!__raw_readb((void __iomem *)(uintptr_t)s->cfg->port_reg);
592 /* ********************************************************************** *
593 * the interrupt related routines *
594 * ********************************************************************** */
596 static void sci_transmit_chars(struct uart_port *port)
598 struct circ_buf *xmit = &port->state->xmit;
599 unsigned int stopped = uart_tx_stopped(port);
600 unsigned short status;
604 status = serial_port_in(port, SCxSR);
605 if (!(status & SCxSR_TDxE(port))) {
606 ctrl = serial_port_in(port, SCSCR);
607 if (uart_circ_empty(xmit))
611 serial_port_out(port, SCSCR, ctrl);
615 count = sci_txroom(port);
623 } else if (!uart_circ_empty(xmit) && !stopped) {
624 c = xmit->buf[xmit->tail];
625 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
630 serial_port_out(port, SCxTDR, c);
633 } while (--count > 0);
635 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
637 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
638 uart_write_wakeup(port);
639 if (uart_circ_empty(xmit)) {
642 ctrl = serial_port_in(port, SCSCR);
644 if (port->type != PORT_SCI) {
645 serial_port_in(port, SCxSR); /* Dummy read */
646 serial_port_out(port, SCxSR, SCxSR_TDxE_CLEAR(port));
650 serial_port_out(port, SCSCR, ctrl);
654 /* On SH3, SCIF may read end-of-break as a space->mark char */
655 #define STEPFN(c) ({int __c = (c); (((__c-1)|(__c)) == -1); })
657 static void sci_receive_chars(struct uart_port *port)
659 struct sci_port *sci_port = to_sci_port(port);
660 struct tty_port *tport = &port->state->port;
661 int i, count, copied = 0;
662 unsigned short status;
665 status = serial_port_in(port, SCxSR);
666 if (!(status & SCxSR_RDxF(port)))
670 /* Don't copy more bytes than there is room for in the buffer */
671 count = tty_buffer_request_room(tport, sci_rxfill(port));
673 /* If for any reason we can't copy more data, we're done! */
677 if (port->type == PORT_SCI) {
678 char c = serial_port_in(port, SCxRDR);
679 if (uart_handle_sysrq_char(port, c) ||
680 sci_port->break_flag)
683 tty_insert_flip_char(tport, c, TTY_NORMAL);
685 for (i = 0; i < count; i++) {
686 char c = serial_port_in(port, SCxRDR);
688 status = serial_port_in(port, SCxSR);
689 #if defined(CONFIG_CPU_SH3)
690 /* Skip "chars" during break */
691 if (sci_port->break_flag) {
693 (status & SCxSR_FER(port))) {
698 /* Nonzero => end-of-break */
699 dev_dbg(port->dev, "debounce<%02x>\n", c);
700 sci_port->break_flag = 0;
707 #endif /* CONFIG_CPU_SH3 */
708 if (uart_handle_sysrq_char(port, c)) {
713 /* Store data and status */
714 if (status & SCxSR_FER(port)) {
716 port->icount.frame++;
717 dev_notice(port->dev, "frame error\n");
718 } else if (status & SCxSR_PER(port)) {
720 port->icount.parity++;
721 dev_notice(port->dev, "parity error\n");
725 tty_insert_flip_char(tport, c, flag);
729 serial_port_in(port, SCxSR); /* dummy read */
730 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
733 port->icount.rx += count;
737 /* Tell the rest of the system the news. New characters! */
738 tty_flip_buffer_push(tport);
740 serial_port_in(port, SCxSR); /* dummy read */
741 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
745 #define SCI_BREAK_JIFFIES (HZ/20)
748 * The sci generates interrupts during the break,
749 * 1 per millisecond or so during the break period, for 9600 baud.
750 * So dont bother disabling interrupts.
751 * But dont want more than 1 break event.
752 * Use a kernel timer to periodically poll the rx line until
753 * the break is finished.
755 static inline void sci_schedule_break_timer(struct sci_port *port)
757 mod_timer(&port->break_timer, jiffies + SCI_BREAK_JIFFIES);
760 /* Ensure that two consecutive samples find the break over. */
761 static void sci_break_timer(unsigned long data)
763 struct sci_port *port = (struct sci_port *)data;
765 if (sci_rxd_in(&port->port) == 0) {
766 port->break_flag = 1;
767 sci_schedule_break_timer(port);
768 } else if (port->break_flag == 1) {
770 port->break_flag = 2;
771 sci_schedule_break_timer(port);
773 port->break_flag = 0;
776 static int sci_handle_errors(struct uart_port *port)
779 unsigned short status = serial_port_in(port, SCxSR);
780 struct tty_port *tport = &port->state->port;
781 struct sci_port *s = to_sci_port(port);
783 /* Handle overruns */
784 if (status & (1 << s->overrun_bit)) {
785 port->icount.overrun++;
788 if (tty_insert_flip_char(tport, 0, TTY_OVERRUN))
791 dev_notice(port->dev, "overrun error\n");
794 if (status & SCxSR_FER(port)) {
795 if (sci_rxd_in(port) == 0) {
796 /* Notify of BREAK */
797 struct sci_port *sci_port = to_sci_port(port);
799 if (!sci_port->break_flag) {
802 sci_port->break_flag = 1;
803 sci_schedule_break_timer(sci_port);
805 /* Do sysrq handling. */
806 if (uart_handle_break(port))
809 dev_dbg(port->dev, "BREAK detected\n");
811 if (tty_insert_flip_char(tport, 0, TTY_BREAK))
817 port->icount.frame++;
819 if (tty_insert_flip_char(tport, 0, TTY_FRAME))
822 dev_notice(port->dev, "frame error\n");
826 if (status & SCxSR_PER(port)) {
828 port->icount.parity++;
830 if (tty_insert_flip_char(tport, 0, TTY_PARITY))
833 dev_notice(port->dev, "parity error\n");
837 tty_flip_buffer_push(tport);
842 static int sci_handle_fifo_overrun(struct uart_port *port)
844 struct tty_port *tport = &port->state->port;
845 struct sci_port *s = to_sci_port(port);
846 struct plat_sci_reg *reg;
849 reg = sci_getreg(port, SCLSR);
853 if ((serial_port_in(port, SCLSR) & (1 << s->overrun_bit))) {
854 serial_port_out(port, SCLSR, 0);
856 port->icount.overrun++;
858 tty_insert_flip_char(tport, 0, TTY_OVERRUN);
859 tty_flip_buffer_push(tport);
861 dev_dbg(port->dev, "overrun error\n");
868 static int sci_handle_breaks(struct uart_port *port)
871 unsigned short status = serial_port_in(port, SCxSR);
872 struct tty_port *tport = &port->state->port;
873 struct sci_port *s = to_sci_port(port);
875 if (uart_handle_break(port))
878 if (!s->break_flag && status & SCxSR_BRK(port)) {
879 #if defined(CONFIG_CPU_SH3)
886 /* Notify of BREAK */
887 if (tty_insert_flip_char(tport, 0, TTY_BREAK))
890 dev_dbg(port->dev, "BREAK detected\n");
894 tty_flip_buffer_push(tport);
896 copied += sci_handle_fifo_overrun(port);
901 static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
903 #ifdef CONFIG_SERIAL_SH_SCI_DMA
904 struct uart_port *port = ptr;
905 struct sci_port *s = to_sci_port(port);
908 u16 scr = serial_port_in(port, SCSCR);
909 u16 ssr = serial_port_in(port, SCxSR);
911 /* Disable future Rx interrupts */
912 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
913 disable_irq_nosync(irq);
918 serial_port_out(port, SCSCR, scr);
919 /* Clear current interrupt */
920 serial_port_out(port, SCxSR, ssr & ~(1 | SCxSR_RDxF(port)));
921 dev_dbg(port->dev, "Rx IRQ %lu: setup t-out in %u jiffies\n",
922 jiffies, s->rx_timeout);
923 mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
929 /* I think sci_receive_chars has to be called irrespective
930 * of whether the I_IXOFF is set, otherwise, how is the interrupt
933 sci_receive_chars(ptr);
938 static irqreturn_t sci_tx_interrupt(int irq, void *ptr)
940 struct uart_port *port = ptr;
943 spin_lock_irqsave(&port->lock, flags);
944 sci_transmit_chars(port);
945 spin_unlock_irqrestore(&port->lock, flags);
950 static irqreturn_t sci_er_interrupt(int irq, void *ptr)
952 struct uart_port *port = ptr;
955 if (port->type == PORT_SCI) {
956 if (sci_handle_errors(port)) {
957 /* discard character in rx buffer */
958 serial_port_in(port, SCxSR);
959 serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
962 sci_handle_fifo_overrun(port);
963 sci_rx_interrupt(irq, ptr);
966 serial_port_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
968 /* Kick the transmission */
969 sci_tx_interrupt(irq, ptr);
974 static irqreturn_t sci_br_interrupt(int irq, void *ptr)
976 struct uart_port *port = ptr;
979 sci_handle_breaks(port);
980 serial_port_out(port, SCxSR, SCxSR_BREAK_CLEAR(port));
985 static inline unsigned long port_rx_irq_mask(struct uart_port *port)
988 * Not all ports (such as SCIFA) will support REIE. Rather than
989 * special-casing the port type, we check the port initialization
990 * IRQ enable mask to see whether the IRQ is desired at all. If
991 * it's unset, it's logically inferred that there's no point in
994 return SCSCR_RIE | (to_sci_port(port)->cfg->scscr & SCSCR_REIE);
997 static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
999 unsigned short ssr_status, scr_status, err_enabled;
1000 unsigned short slr_status = 0;
1001 struct uart_port *port = ptr;
1002 struct sci_port *s = to_sci_port(port);
1003 irqreturn_t ret = IRQ_NONE;
1005 ssr_status = serial_port_in(port, SCxSR);
1006 scr_status = serial_port_in(port, SCSCR);
1007 if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
1008 slr_status = serial_port_in(port, SCLSR);
1009 err_enabled = scr_status & port_rx_irq_mask(port);
1012 if ((ssr_status & SCxSR_TDxE(port)) && (scr_status & SCSCR_TIE) &&
1014 ret = sci_tx_interrupt(irq, ptr);
1017 * Rx Interrupt: if we're using DMA, the DMA controller clears RDF /
1020 if (((ssr_status & SCxSR_RDxF(port)) || s->chan_rx) &&
1021 (scr_status & SCSCR_RIE)) {
1022 if (port->type == PORT_SCIF || port->type == PORT_HSCIF)
1023 sci_handle_fifo_overrun(port);
1024 ret = sci_rx_interrupt(irq, ptr);
1027 /* Error Interrupt */
1028 if ((ssr_status & SCxSR_ERRORS(port)) && err_enabled)
1029 ret = sci_er_interrupt(irq, ptr);
1031 /* Break Interrupt */
1032 if ((ssr_status & SCxSR_BRK(port)) && err_enabled)
1033 ret = sci_br_interrupt(irq, ptr);
1035 /* Overrun Interrupt */
1036 if (port->type == PORT_SCIF || port->type == PORT_HSCIF) {
1037 if (slr_status & 0x01)
1038 sci_handle_fifo_overrun(port);
1045 * Here we define a transition notifier so that we can update all of our
1046 * ports' baud rate when the peripheral clock changes.
1048 static int sci_notifier(struct notifier_block *self,
1049 unsigned long phase, void *p)
1051 struct sci_port *sci_port;
1052 unsigned long flags;
1054 sci_port = container_of(self, struct sci_port, freq_transition);
1056 if (phase == CPUFREQ_POSTCHANGE) {
1057 struct uart_port *port = &sci_port->port;
1059 spin_lock_irqsave(&port->lock, flags);
1060 port->uartclk = clk_get_rate(sci_port->iclk);
1061 spin_unlock_irqrestore(&port->lock, flags);
1067 static struct sci_irq_desc {
1069 irq_handler_t handler;
1070 } sci_irq_desc[] = {
1072 * Split out handlers, the default case.
1076 .handler = sci_er_interrupt,
1081 .handler = sci_rx_interrupt,
1086 .handler = sci_tx_interrupt,
1091 .handler = sci_br_interrupt,
1095 * Special muxed handler.
1099 .handler = sci_mpxed_interrupt,
1103 static int sci_request_irq(struct sci_port *port)
1105 struct uart_port *up = &port->port;
1108 for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) {
1109 struct sci_irq_desc *desc;
1112 if (SCIx_IRQ_IS_MUXED(port)) {
1116 irq = port->irqs[i];
1119 * Certain port types won't support all of the
1120 * available interrupt sources.
1122 if (unlikely(irq < 0))
1126 desc = sci_irq_desc + i;
1127 port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
1128 dev_name(up->dev), desc->desc);
1129 if (!port->irqstr[j]) {
1130 dev_err(up->dev, "Failed to allocate %s IRQ string\n",
1135 ret = request_irq(irq, desc->handler, up->irqflags,
1136 port->irqstr[j], port);
1137 if (unlikely(ret)) {
1138 dev_err(up->dev, "Can't allocate %s IRQ\n", desc->desc);
1147 free_irq(port->irqs[i], port);
1151 kfree(port->irqstr[j]);
1156 static void sci_free_irq(struct sci_port *port)
1161 * Intentionally in reverse order so we iterate over the muxed
1164 for (i = 0; i < SCIx_NR_IRQS; i++) {
1165 int irq = port->irqs[i];
1168 * Certain port types won't support all of the available
1169 * interrupt sources.
1171 if (unlikely(irq < 0))
1174 free_irq(port->irqs[i], port);
1175 kfree(port->irqstr[i]);
1177 if (SCIx_IRQ_IS_MUXED(port)) {
1178 /* If there's only one IRQ, we're done. */
1184 static unsigned int sci_tx_empty(struct uart_port *port)
1186 unsigned short status = serial_port_in(port, SCxSR);
1187 unsigned short in_tx_fifo = sci_txfill(port);
1189 return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0;
1193 * Modem control is a bit of a mixed bag for SCI(F) ports. Generally
1194 * CTS/RTS is supported in hardware by at least one port and controlled
1195 * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently
1196 * handled via the ->init_pins() op, which is a bit of a one-way street,
1197 * lacking any ability to defer pin control -- this will later be
1198 * converted over to the GPIO framework).
1200 * Other modes (such as loopback) are supported generically on certain
1201 * port types, but not others. For these it's sufficient to test for the
1202 * existence of the support register and simply ignore the port type.
1204 static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
1206 if (mctrl & TIOCM_LOOP) {
1207 struct plat_sci_reg *reg;
1210 * Standard loopback mode for SCFCR ports.
1212 reg = sci_getreg(port, SCFCR);
1214 serial_port_out(port, SCFCR,
1215 serial_port_in(port, SCFCR) |
1220 static unsigned int sci_get_mctrl(struct uart_port *port)
1223 * CTS/RTS is handled in hardware when supported, while nothing
1224 * else is wired up. Keep it simple and simply assert DSR/CAR.
1226 return TIOCM_DSR | TIOCM_CAR;
1229 #ifdef CONFIG_SERIAL_SH_SCI_DMA
1230 static void sci_dma_tx_complete(void *arg)
1232 struct sci_port *s = arg;
1233 struct uart_port *port = &s->port;
1234 struct circ_buf *xmit = &port->state->xmit;
1235 unsigned long flags;
1237 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
1239 spin_lock_irqsave(&port->lock, flags);
1241 xmit->tail += sg_dma_len(&s->sg_tx);
1242 xmit->tail &= UART_XMIT_SIZE - 1;
1244 port->icount.tx += sg_dma_len(&s->sg_tx);
1246 async_tx_ack(s->desc_tx);
1249 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
1250 uart_write_wakeup(port);
1252 if (!uart_circ_empty(xmit)) {
1254 schedule_work(&s->work_tx);
1256 s->cookie_tx = -EINVAL;
1257 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
1258 u16 ctrl = serial_port_in(port, SCSCR);
1259 serial_port_out(port, SCSCR, ctrl & ~SCSCR_TIE);
1263 spin_unlock_irqrestore(&port->lock, flags);
1266 /* Locking: called with port lock held */
1267 static int sci_dma_rx_push(struct sci_port *s, size_t count)
1269 struct uart_port *port = &s->port;
1270 struct tty_port *tport = &port->state->port;
1271 int i, active, room;
1273 room = tty_buffer_request_room(tport, count);
1275 if (s->active_rx == s->cookie_rx[0]) {
1277 } else if (s->active_rx == s->cookie_rx[1]) {
1280 dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
1285 dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
1290 for (i = 0; i < room; i++)
1291 tty_insert_flip_char(tport, ((u8 *)sg_virt(&s->sg_rx[active]))[i],
1294 port->icount.rx += room;
1299 static void sci_dma_rx_complete(void *arg)
1301 struct sci_port *s = arg;
1302 struct uart_port *port = &s->port;
1303 unsigned long flags;
1306 dev_dbg(port->dev, "%s(%d) active #%d\n",
1307 __func__, port->line, s->active_rx);
1309 spin_lock_irqsave(&port->lock, flags);
1311 count = sci_dma_rx_push(s, s->buf_len_rx);
1313 mod_timer(&s->rx_timer, jiffies + s->rx_timeout);
1315 spin_unlock_irqrestore(&port->lock, flags);
1318 tty_flip_buffer_push(&port->state->port);
1320 schedule_work(&s->work_rx);
1323 static void sci_rx_dma_release(struct sci_port *s, bool enable_pio)
1325 struct dma_chan *chan = s->chan_rx;
1326 struct uart_port *port = &s->port;
1329 s->cookie_rx[0] = s->cookie_rx[1] = -EINVAL;
1330 dma_release_channel(chan);
1331 if (sg_dma_address(&s->sg_rx[0]))
1332 dma_free_coherent(port->dev, s->buf_len_rx * 2,
1333 sg_virt(&s->sg_rx[0]), sg_dma_address(&s->sg_rx[0]));
1338 static void sci_tx_dma_release(struct sci_port *s, bool enable_pio)
1340 struct dma_chan *chan = s->chan_tx;
1341 struct uart_port *port = &s->port;
1344 s->cookie_tx = -EINVAL;
1345 dma_release_channel(chan);
1350 static void sci_submit_rx(struct sci_port *s)
1352 struct dma_chan *chan = s->chan_rx;
1355 for (i = 0; i < 2; i++) {
1356 struct scatterlist *sg = &s->sg_rx[i];
1357 struct dma_async_tx_descriptor *desc;
1359 desc = dmaengine_prep_slave_sg(chan,
1360 sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
1363 s->desc_rx[i] = desc;
1364 desc->callback = sci_dma_rx_complete;
1365 desc->callback_param = s;
1366 s->cookie_rx[i] = desc->tx_submit(desc);
1369 if (!desc || s->cookie_rx[i] < 0) {
1371 async_tx_ack(s->desc_rx[0]);
1372 s->cookie_rx[0] = -EINVAL;
1376 s->cookie_rx[i] = -EINVAL;
1378 dev_warn(s->port.dev,
1379 "failed to re-start DMA, using PIO\n");
1380 sci_rx_dma_release(s, true);
1383 dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n",
1384 __func__, s->cookie_rx[i], i);
1387 s->active_rx = s->cookie_rx[0];
1389 dma_async_issue_pending(chan);
1392 static void work_fn_rx(struct work_struct *work)
1394 struct sci_port *s = container_of(work, struct sci_port, work_rx);
1395 struct uart_port *port = &s->port;
1396 struct dma_async_tx_descriptor *desc;
1399 if (s->active_rx == s->cookie_rx[0]) {
1401 } else if (s->active_rx == s->cookie_rx[1]) {
1404 dev_err(port->dev, "cookie %d not found!\n", s->active_rx);
1407 desc = s->desc_rx[new];
1409 if (dma_async_is_tx_complete(s->chan_rx, s->active_rx, NULL, NULL) !=
1411 /* Handle incomplete DMA receive */
1412 struct dma_chan *chan = s->chan_rx;
1413 struct shdma_desc *sh_desc = container_of(desc,
1414 struct shdma_desc, async_tx);
1415 unsigned long flags;
1418 dmaengine_terminate_all(chan);
1419 dev_dbg(port->dev, "Read %zu bytes with cookie %d\n",
1420 sh_desc->partial, sh_desc->cookie);
1422 spin_lock_irqsave(&port->lock, flags);
1423 count = sci_dma_rx_push(s, sh_desc->partial);
1424 spin_unlock_irqrestore(&port->lock, flags);
1427 tty_flip_buffer_push(&port->state->port);
1434 s->cookie_rx[new] = desc->tx_submit(desc);
1435 if (s->cookie_rx[new] < 0) {
1436 dev_warn(port->dev, "Failed submitting Rx DMA descriptor\n");
1437 sci_rx_dma_release(s, true);
1441 s->active_rx = s->cookie_rx[!new];
1443 dev_dbg(port->dev, "%s: cookie %d #%d, new active #%d\n",
1444 __func__, s->cookie_rx[new], new, s->active_rx);
1447 static void work_fn_tx(struct work_struct *work)
1449 struct sci_port *s = container_of(work, struct sci_port, work_tx);
1450 struct dma_async_tx_descriptor *desc;
1451 struct dma_chan *chan = s->chan_tx;
1452 struct uart_port *port = &s->port;
1453 struct circ_buf *xmit = &port->state->xmit;
1454 struct scatterlist *sg = &s->sg_tx;
1458 * Port xmit buffer is already mapped, and it is one page... Just adjust
1459 * offsets and lengths. Since it is a circular buffer, we have to
1460 * transmit till the end, and then the rest. Take the port lock to get a
1461 * consistent xmit buffer state.
1463 spin_lock_irq(&port->lock);
1464 sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
1465 sg_dma_address(sg) = (sg_dma_address(sg) & ~(UART_XMIT_SIZE - 1)) +
1467 sg_dma_len(sg) = min((int)CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE),
1468 CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE));
1469 spin_unlock_irq(&port->lock);
1471 BUG_ON(!sg_dma_len(sg));
1473 desc = dmaengine_prep_slave_sg(chan,
1474 sg, s->sg_len_tx, DMA_MEM_TO_DEV,
1475 DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
1478 sci_tx_dma_release(s, true);
1482 dma_sync_sg_for_device(port->dev, sg, 1, DMA_TO_DEVICE);
1484 spin_lock_irq(&port->lock);
1486 desc->callback = sci_dma_tx_complete;
1487 desc->callback_param = s;
1488 spin_unlock_irq(&port->lock);
1489 s->cookie_tx = desc->tx_submit(desc);
1490 if (s->cookie_tx < 0) {
1491 dev_warn(port->dev, "Failed submitting Tx DMA descriptor\n");
1493 sci_tx_dma_release(s, true);
1497 dev_dbg(port->dev, "%s: %p: %d...%d, cookie %d\n",
1498 __func__, xmit->buf, xmit->tail, xmit->head, s->cookie_tx);
1500 dma_async_issue_pending(chan);
1504 static void sci_start_tx(struct uart_port *port)
1506 struct sci_port *s = to_sci_port(port);
1507 unsigned short ctrl;
1509 #ifdef CONFIG_SERIAL_SH_SCI_DMA
1510 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
1511 u16 new, scr = serial_port_in(port, SCSCR);
1513 new = scr | SCSCR_TDRQE;
1515 new = scr & ~SCSCR_TDRQE;
1517 serial_port_out(port, SCSCR, new);
1520 if (s->chan_tx && !uart_circ_empty(&s->port.state->xmit) &&
1523 schedule_work(&s->work_tx);
1527 if (!s->chan_tx || port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
1528 /* Set TIE (Transmit Interrupt Enable) bit in SCSCR */
1529 ctrl = serial_port_in(port, SCSCR);
1530 serial_port_out(port, SCSCR, ctrl | SCSCR_TIE);
1534 static void sci_stop_tx(struct uart_port *port)
1536 unsigned short ctrl;
1538 /* Clear TIE (Transmit Interrupt Enable) bit in SCSCR */
1539 ctrl = serial_port_in(port, SCSCR);
1541 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
1542 ctrl &= ~SCSCR_TDRQE;
1546 serial_port_out(port, SCSCR, ctrl);
1549 static void sci_start_rx(struct uart_port *port)
1551 unsigned short ctrl;
1553 ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
1555 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
1556 ctrl &= ~SCSCR_RDRQE;
1558 serial_port_out(port, SCSCR, ctrl);
1561 static void sci_stop_rx(struct uart_port *port)
1563 unsigned short ctrl;
1565 ctrl = serial_port_in(port, SCSCR);
1567 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
1568 ctrl &= ~SCSCR_RDRQE;
1570 ctrl &= ~port_rx_irq_mask(port);
1572 serial_port_out(port, SCSCR, ctrl);
1575 static void sci_break_ctl(struct uart_port *port, int break_state)
1577 struct sci_port *s = to_sci_port(port);
1578 struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
1579 unsigned short scscr, scsptr;
1581 /* check wheter the port has SCSPTR */
1584 * Not supported by hardware. Most parts couple break and rx
1585 * interrupts together, with break detection always enabled.
1590 scsptr = serial_port_in(port, SCSPTR);
1591 scscr = serial_port_in(port, SCSCR);
1593 if (break_state == -1) {
1594 scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
1597 scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO;
1601 serial_port_out(port, SCSPTR, scsptr);
1602 serial_port_out(port, SCSCR, scscr);
1605 #ifdef CONFIG_SERIAL_SH_SCI_DMA
1606 static bool filter(struct dma_chan *chan, void *slave)
1608 struct sh_dmae_slave *param = slave;
1610 dev_dbg(chan->device->dev, "%s: slave ID %d\n",
1611 __func__, param->shdma_slave.slave_id);
1613 chan->private = ¶m->shdma_slave;
1617 static void rx_timer_fn(unsigned long arg)
1619 struct sci_port *s = (struct sci_port *)arg;
1620 struct uart_port *port = &s->port;
1621 u16 scr = serial_port_in(port, SCSCR);
1623 if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
1624 scr &= ~SCSCR_RDRQE;
1625 enable_irq(s->irqs[SCIx_RXI_IRQ]);
1627 serial_port_out(port, SCSCR, scr | SCSCR_RIE);
1628 dev_dbg(port->dev, "DMA Rx timed out\n");
1629 schedule_work(&s->work_rx);
1632 static void sci_request_dma(struct uart_port *port)
1634 struct sci_port *s = to_sci_port(port);
1635 struct sh_dmae_slave *param;
1636 struct dma_chan *chan;
1637 dma_cap_mask_t mask;
1640 dev_dbg(port->dev, "%s: port %d\n", __func__, port->line);
1642 if (s->cfg->dma_slave_tx <= 0 || s->cfg->dma_slave_rx <= 0)
1646 dma_cap_set(DMA_SLAVE, mask);
1648 param = &s->param_tx;
1650 /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_TX */
1651 param->shdma_slave.slave_id = s->cfg->dma_slave_tx;
1653 s->cookie_tx = -EINVAL;
1654 chan = dma_request_channel(mask, filter, param);
1655 dev_dbg(port->dev, "%s: TX: got channel %p\n", __func__, chan);
1658 sg_init_table(&s->sg_tx, 1);
1659 /* UART circular tx buffer is an aligned page. */
1660 BUG_ON((uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
1661 sg_set_page(&s->sg_tx, virt_to_page(port->state->xmit.buf),
1663 (uintptr_t)port->state->xmit.buf & ~PAGE_MASK);
1664 nent = dma_map_sg(port->dev, &s->sg_tx, 1, DMA_TO_DEVICE);
1666 sci_tx_dma_release(s, false);
1668 dev_dbg(port->dev, "%s: mapped %d@%p to %pad\n",
1670 sg_dma_len(&s->sg_tx), port->state->xmit.buf,
1671 &sg_dma_address(&s->sg_tx));
1673 s->sg_len_tx = nent;
1675 INIT_WORK(&s->work_tx, work_fn_tx);
1678 param = &s->param_rx;
1680 /* Slave ID, e.g., SHDMA_SLAVE_SCIF0_RX */
1681 param->shdma_slave.slave_id = s->cfg->dma_slave_rx;
1683 chan = dma_request_channel(mask, filter, param);
1684 dev_dbg(port->dev, "%s: RX: got channel %p\n", __func__, chan);
1692 s->buf_len_rx = 2 * max(16, (int)port->fifosize);
1693 buf[0] = dma_alloc_coherent(port->dev, s->buf_len_rx * 2,
1694 &dma[0], GFP_KERNEL);
1698 "failed to allocate dma buffer, using PIO\n");
1699 sci_rx_dma_release(s, true);
1703 buf[1] = buf[0] + s->buf_len_rx;
1704 dma[1] = dma[0] + s->buf_len_rx;
1706 for (i = 0; i < 2; i++) {
1707 struct scatterlist *sg = &s->sg_rx[i];
1709 sg_init_table(sg, 1);
1710 sg_set_page(sg, virt_to_page(buf[i]), s->buf_len_rx,
1711 (uintptr_t)buf[i] & ~PAGE_MASK);
1712 sg_dma_address(sg) = dma[i];
1715 INIT_WORK(&s->work_rx, work_fn_rx);
1716 setup_timer(&s->rx_timer, rx_timer_fn, (unsigned long)s);
1722 static void sci_free_dma(struct uart_port *port)
1724 struct sci_port *s = to_sci_port(port);
1727 sci_tx_dma_release(s, false);
1729 sci_rx_dma_release(s, false);
1732 static inline void sci_request_dma(struct uart_port *port)
1736 static inline void sci_free_dma(struct uart_port *port)
1741 static int sci_startup(struct uart_port *port)
1743 struct sci_port *s = to_sci_port(port);
1744 unsigned long flags;
1747 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
1749 ret = sci_request_irq(s);
1750 if (unlikely(ret < 0))
1753 sci_request_dma(port);
1755 spin_lock_irqsave(&port->lock, flags);
1758 spin_unlock_irqrestore(&port->lock, flags);
1763 static void sci_shutdown(struct uart_port *port)
1765 struct sci_port *s = to_sci_port(port);
1766 unsigned long flags;
1768 dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
1770 spin_lock_irqsave(&port->lock, flags);
1773 spin_unlock_irqrestore(&port->lock, flags);
1779 static unsigned int sci_scbrr_calc(struct sci_port *s, unsigned int bps,
1782 if (s->sampling_rate)
1783 return DIV_ROUND_CLOSEST(freq, s->sampling_rate * bps) - 1;
1785 /* Warn, but use a safe default */
1788 return ((freq + 16 * bps) / (32 * bps) - 1);
1791 /* calculate frame length from SMR */
1792 static int sci_baud_calc_frame_len(unsigned int smr_val)
1796 if (smr_val & SCSMR_CHR)
1798 if (smr_val & SCSMR_PE)
1800 if (smr_val & SCSMR_STOP)
1807 /* calculate sample rate, BRR, and clock select for HSCIF */
1808 static void sci_baud_calc_hscif(unsigned int bps, unsigned long freq,
1809 int *brr, unsigned int *srr,
1810 unsigned int *cks, int frame_len)
1812 int sr, c, br, err, recv_margin;
1813 int min_err = 1000; /* 100% */
1814 int recv_max_margin = 0;
1816 /* Find the combination of sample rate and clock select with the
1817 smallest deviation from the desired baud rate. */
1818 for (sr = 8; sr <= 32; sr++) {
1819 for (c = 0; c <= 3; c++) {
1820 /* integerized formulas from HSCIF documentation */
1821 br = DIV_ROUND_CLOSEST(freq, (sr *
1822 (1 << (2 * c + 1)) * bps)) - 1;
1823 br = clamp(br, 0, 255);
1824 err = DIV_ROUND_CLOSEST(freq, ((br + 1) * bps * sr *
1825 (1 << (2 * c + 1)) / 1000)) -
1828 * M: Receive margin (%)
1829 * N: Ratio of bit rate to clock (N = sampling rate)
1830 * D: Clock duty (D = 0 to 1.0)
1831 * L: Frame length (L = 9 to 12)
1832 * F: Absolute value of clock frequency deviation
1834 * M = |(0.5 - 1 / 2 * N) - ((L - 0.5) * F) -
1835 * (|D - 0.5| / N * (1 + F))|
1836 * NOTE: Usually, treat D for 0.5, F is 0 by this
1839 recv_margin = abs((500 -
1840 DIV_ROUND_CLOSEST(1000, sr << 1)) / 10);
1841 if (abs(min_err) > abs(err)) {
1843 recv_max_margin = recv_margin;
1844 } else if ((min_err == err) &&
1845 (recv_margin > recv_max_margin))
1846 recv_max_margin = recv_margin;
1856 if (min_err == 1000) {
1865 static void sci_reset(struct uart_port *port)
1867 struct plat_sci_reg *reg;
1868 unsigned int status;
1871 status = serial_port_in(port, SCxSR);
1872 } while (!(status & SCxSR_TEND(port)));
1874 serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
1876 reg = sci_getreg(port, SCFCR);
1878 serial_port_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST);
1881 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
1882 struct ktermios *old)
1884 struct sci_port *s = to_sci_port(port);
1885 struct plat_sci_reg *reg;
1886 unsigned int baud, smr_val = 0, max_baud, cks = 0;
1888 unsigned int srr = 15;
1890 if ((termios->c_cflag & CSIZE) == CS7)
1891 smr_val |= SCSMR_CHR;
1892 if (termios->c_cflag & PARENB)
1893 smr_val |= SCSMR_PE;
1894 if (termios->c_cflag & PARODD)
1895 smr_val |= SCSMR_PE | SCSMR_ODD;
1896 if (termios->c_cflag & CSTOPB)
1897 smr_val |= SCSMR_STOP;
1900 * earlyprintk comes here early on with port->uartclk set to zero.
1901 * the clock framework is not up and running at this point so here
1902 * we assume that 115200 is the maximum baud rate. please note that
1903 * the baud rate is not programmed during earlyprintk - it is assumed
1904 * that the previous boot loader has enabled required clocks and
1905 * setup the baud rate generator hardware for us already.
1907 max_baud = port->uartclk ? port->uartclk / 16 : 115200;
1909 baud = uart_get_baud_rate(port, termios, old, 0, max_baud);
1910 if (likely(baud && port->uartclk)) {
1911 if (s->cfg->type == PORT_HSCIF) {
1912 int frame_len = sci_baud_calc_frame_len(smr_val);
1913 sci_baud_calc_hscif(baud, port->uartclk, &t, &srr,
1916 t = sci_scbrr_calc(s, baud, port->uartclk);
1917 for (cks = 0; t >= 256 && cks <= 3; cks++)
1926 smr_val |= serial_port_in(port, SCSMR) & 3;
1928 uart_update_timeout(port, termios->c_cflag, baud);
1930 dev_dbg(port->dev, "%s: SMR %x, cks %x, t %x, SCSCR %x\n",
1931 __func__, smr_val, cks, t, s->cfg->scscr);
1934 serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks);
1935 serial_port_out(port, SCBRR, t);
1936 reg = sci_getreg(port, HSSRR);
1938 serial_port_out(port, HSSRR, srr | HSCIF_SRE);
1939 udelay((1000000+(baud-1)) / baud); /* Wait one bit interval */
1941 serial_port_out(port, SCSMR, smr_val);
1943 sci_init_pins(port, termios->c_cflag);
1945 reg = sci_getreg(port, SCFCR);
1947 unsigned short ctrl = serial_port_in(port, SCFCR);
1949 if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) {
1950 if (termios->c_cflag & CRTSCTS)
1957 * As we've done a sci_reset() above, ensure we don't
1958 * interfere with the FIFOs while toggling MCE. As the
1959 * reset values could still be set, simply mask them out.
1961 ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST);
1963 serial_port_out(port, SCFCR, ctrl);
1966 serial_port_out(port, SCSCR, s->cfg->scscr);
1968 #ifdef CONFIG_SERIAL_SH_SCI_DMA
1970 * Calculate delay for 1.5 DMA buffers: see
1971 * drivers/serial/serial_core.c::uart_update_timeout(). With 10 bits
1972 * (CS8), 250Hz, 115200 baud and 64 bytes FIFO, the above function
1973 * calculates 1 jiffie for the data plus 5 jiffies for the "slop(e)."
1974 * Then below we calculate 3 jiffies (12ms) for 1.5 DMA buffers (3 FIFO
1975 * sizes), but it has been found out experimentally, that this is not
1976 * enough: the driver too often needlessly runs on a DMA timeout. 20ms
1977 * as a minimum seem to work perfectly.
1980 s->rx_timeout = (port->timeout - HZ / 50) * s->buf_len_rx * 3 /
1982 dev_dbg(port->dev, "DMA Rx t-out %ums, tty t-out %u jiffies\n",
1983 s->rx_timeout * 1000 / HZ, port->timeout);
1984 if (s->rx_timeout < msecs_to_jiffies(20))
1985 s->rx_timeout = msecs_to_jiffies(20);
1989 if ((termios->c_cflag & CREAD) != 0)
1992 sci_port_disable(s);
1995 static void sci_pm(struct uart_port *port, unsigned int state,
1996 unsigned int oldstate)
1998 struct sci_port *sci_port = to_sci_port(port);
2001 case UART_PM_STATE_OFF:
2002 sci_port_disable(sci_port);
2005 sci_port_enable(sci_port);
2010 static const char *sci_type(struct uart_port *port)
2012 switch (port->type) {
2030 static inline unsigned long sci_port_size(struct uart_port *port)
2033 * Pick an arbitrary size that encapsulates all of the base
2034 * registers by default. This can be optimized later, or derived
2035 * from platform resource data at such a time that ports begin to
2036 * behave more erratically.
2038 if (port->type == PORT_HSCIF)
2044 static int sci_remap_port(struct uart_port *port)
2046 unsigned long size = sci_port_size(port);
2049 * Nothing to do if there's already an established membase.
2054 if (port->flags & UPF_IOREMAP) {
2055 port->membase = ioremap_nocache(port->mapbase, size);
2056 if (unlikely(!port->membase)) {
2057 dev_err(port->dev, "can't remap port#%d\n", port->line);
2062 * For the simple (and majority of) cases where we don't
2063 * need to do any remapping, just cast the cookie
2066 port->membase = (void __iomem *)(uintptr_t)port->mapbase;
2072 static void sci_release_port(struct uart_port *port)
2074 if (port->flags & UPF_IOREMAP) {
2075 iounmap(port->membase);
2076 port->membase = NULL;
2079 release_mem_region(port->mapbase, sci_port_size(port));
2082 static int sci_request_port(struct uart_port *port)
2084 unsigned long size = sci_port_size(port);
2085 struct resource *res;
2088 res = request_mem_region(port->mapbase, size, dev_name(port->dev));
2089 if (unlikely(res == NULL))
2092 ret = sci_remap_port(port);
2093 if (unlikely(ret != 0)) {
2094 release_resource(res);
2101 static void sci_config_port(struct uart_port *port, int flags)
2103 if (flags & UART_CONFIG_TYPE) {
2104 struct sci_port *sport = to_sci_port(port);
2106 port->type = sport->cfg->type;
2107 sci_request_port(port);
2111 static int sci_verify_port(struct uart_port *port, struct serial_struct *ser)
2113 if (ser->baud_base < 2400)
2114 /* No paper tape reader for Mitch.. */
2120 static struct uart_ops sci_uart_ops = {
2121 .tx_empty = sci_tx_empty,
2122 .set_mctrl = sci_set_mctrl,
2123 .get_mctrl = sci_get_mctrl,
2124 .start_tx = sci_start_tx,
2125 .stop_tx = sci_stop_tx,
2126 .stop_rx = sci_stop_rx,
2127 .break_ctl = sci_break_ctl,
2128 .startup = sci_startup,
2129 .shutdown = sci_shutdown,
2130 .set_termios = sci_set_termios,
2133 .release_port = sci_release_port,
2134 .request_port = sci_request_port,
2135 .config_port = sci_config_port,
2136 .verify_port = sci_verify_port,
2137 #ifdef CONFIG_CONSOLE_POLL
2138 .poll_get_char = sci_poll_get_char,
2139 .poll_put_char = sci_poll_put_char,
2143 static int sci_init_single(struct platform_device *dev,
2144 struct sci_port *sci_port, unsigned int index,
2145 struct plat_sci_port *p, bool early)
2147 struct uart_port *port = &sci_port->port;
2148 const struct resource *res;
2149 unsigned int sampling_rate;
2155 port->ops = &sci_uart_ops;
2156 port->iotype = UPIO_MEM;
2159 res = platform_get_resource(dev, IORESOURCE_MEM, 0);
2163 port->mapbase = res->start;
2165 for (i = 0; i < ARRAY_SIZE(sci_port->irqs); ++i)
2166 sci_port->irqs[i] = platform_get_irq(dev, i);
2168 /* The SCI generates several interrupts. They can be muxed together or
2169 * connected to different interrupt lines. In the muxed case only one
2170 * interrupt resource is specified. In the non-muxed case three or four
2171 * interrupt resources are specified, as the BRI interrupt is optional.
2173 if (sci_port->irqs[0] < 0)
2176 if (sci_port->irqs[1] < 0) {
2177 sci_port->irqs[1] = sci_port->irqs[0];
2178 sci_port->irqs[2] = sci_port->irqs[0];
2179 sci_port->irqs[3] = sci_port->irqs[0];
2182 if (p->regtype == SCIx_PROBE_REGTYPE) {
2183 ret = sci_probe_regmap(p);
2190 port->fifosize = 256;
2191 sci_port->overrun_bit = 9;
2195 port->fifosize = 128;
2197 sci_port->overrun_bit = 0;
2200 port->fifosize = 64;
2201 sci_port->overrun_bit = 9;
2205 port->fifosize = 16;
2206 if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) {
2207 sci_port->overrun_bit = 9;
2210 sci_port->overrun_bit = 0;
2216 sci_port->overrun_bit = 5;
2221 /* SCIFA on sh7723 and sh7724 need a custom sampling rate that doesn't
2222 * match the SoC datasheet, this should be investigated. Let platform
2223 * data override the sampling rate for now.
2225 sci_port->sampling_rate = p->sampling_rate ? p->sampling_rate
2229 sci_port->iclk = clk_get(&dev->dev, "sci_ick");
2230 if (IS_ERR(sci_port->iclk)) {
2231 sci_port->iclk = clk_get(&dev->dev, "peripheral_clk");
2232 if (IS_ERR(sci_port->iclk)) {
2233 dev_err(&dev->dev, "can't get iclk\n");
2234 return PTR_ERR(sci_port->iclk);
2239 * The function clock is optional, ignore it if we can't
2242 sci_port->fclk = clk_get(&dev->dev, "sci_fck");
2243 if (IS_ERR(sci_port->fclk))
2244 sci_port->fclk = NULL;
2246 port->dev = &dev->dev;
2248 pm_runtime_enable(&dev->dev);
2251 sci_port->break_timer.data = (unsigned long)sci_port;
2252 sci_port->break_timer.function = sci_break_timer;
2253 init_timer(&sci_port->break_timer);
2256 * Establish some sensible defaults for the error detection.
2258 sci_port->error_mask = (p->type == PORT_SCI) ?
2259 SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK;
2262 * Establish sensible defaults for the overrun detection, unless
2263 * the part has explicitly disabled support for it.
2267 * Make the error mask inclusive of overrun detection, if
2270 sci_port->error_mask |= 1 << sci_port->overrun_bit;
2272 port->type = p->type;
2273 port->flags = UPF_FIXED_PORT | p->flags;
2274 port->regshift = p->regshift;
2277 * The UART port needs an IRQ value, so we peg this to the RX IRQ
2278 * for the multi-IRQ ports, which is where we are primarily
2279 * concerned with the shutdown path synchronization.
2281 * For the muxed case there's nothing more to do.
2283 port->irq = sci_port->irqs[SCIx_RXI_IRQ];
2286 port->serial_in = sci_serial_in;
2287 port->serial_out = sci_serial_out;
2289 if (p->dma_slave_tx > 0 && p->dma_slave_rx > 0)
2290 dev_dbg(port->dev, "DMA tx %d, rx %d\n",
2291 p->dma_slave_tx, p->dma_slave_rx);
2296 static void sci_cleanup_single(struct sci_port *port)
2298 clk_put(port->iclk);
2299 clk_put(port->fclk);
2301 pm_runtime_disable(port->port.dev);
2304 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
2305 static void serial_console_putchar(struct uart_port *port, int ch)
2307 sci_poll_put_char(port, ch);
2311 * Print a string to the serial port trying not to disturb
2312 * any possible real use of the port...
2314 static void serial_console_write(struct console *co, const char *s,
2317 struct sci_port *sci_port = &sci_ports[co->index];
2318 struct uart_port *port = &sci_port->port;
2319 unsigned short bits, ctrl;
2320 unsigned long flags;
2323 local_irq_save(flags);
2326 else if (oops_in_progress)
2327 locked = spin_trylock(&port->lock);
2329 spin_lock(&port->lock);
2331 /* first save the SCSCR then disable the interrupts */
2332 ctrl = serial_port_in(port, SCSCR);
2333 serial_port_out(port, SCSCR, sci_port->cfg->scscr);
2335 uart_console_write(port, s, count, serial_console_putchar);
2337 /* wait until fifo is empty and last bit has been transmitted */
2338 bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
2339 while ((serial_port_in(port, SCxSR) & bits) != bits)
2342 /* restore the SCSCR */
2343 serial_port_out(port, SCSCR, ctrl);
2346 spin_unlock(&port->lock);
2347 local_irq_restore(flags);
2350 static int serial_console_setup(struct console *co, char *options)
2352 struct sci_port *sci_port;
2353 struct uart_port *port;
2361 * Refuse to handle any bogus ports.
2363 if (co->index < 0 || co->index >= SCI_NPORTS)
2366 sci_port = &sci_ports[co->index];
2367 port = &sci_port->port;
2370 * Refuse to handle uninitialized ports.
2375 ret = sci_remap_port(port);
2376 if (unlikely(ret != 0))
2380 uart_parse_options(options, &baud, &parity, &bits, &flow);
2382 return uart_set_options(port, co, baud, parity, bits, flow);
2385 static struct console serial_console = {
2387 .device = uart_console_device,
2388 .write = serial_console_write,
2389 .setup = serial_console_setup,
2390 .flags = CON_PRINTBUFFER,
2392 .data = &sci_uart_driver,
2395 static struct console early_serial_console = {
2396 .name = "early_ttySC",
2397 .write = serial_console_write,
2398 .flags = CON_PRINTBUFFER,
2402 static char early_serial_buf[32];
2404 static int sci_probe_earlyprintk(struct platform_device *pdev)
2406 struct plat_sci_port *cfg = dev_get_platdata(&pdev->dev);
2408 if (early_serial_console.data)
2411 early_serial_console.index = pdev->id;
2413 sci_init_single(pdev, &sci_ports[pdev->id], pdev->id, cfg, true);
2415 serial_console_setup(&early_serial_console, early_serial_buf);
2417 if (!strstr(early_serial_buf, "keep"))
2418 early_serial_console.flags |= CON_BOOT;
2420 register_console(&early_serial_console);
2424 #define SCI_CONSOLE (&serial_console)
2427 static inline int sci_probe_earlyprintk(struct platform_device *pdev)
2432 #define SCI_CONSOLE NULL
2434 #endif /* CONFIG_SERIAL_SH_SCI_CONSOLE */
2436 static const char banner[] __initconst = "SuperH (H)SCI(F) driver initialized";
2438 static struct uart_driver sci_uart_driver = {
2439 .owner = THIS_MODULE,
2440 .driver_name = "sci",
2441 .dev_name = "ttySC",
2443 .minor = SCI_MINOR_START,
2445 .cons = SCI_CONSOLE,
2448 static int sci_remove(struct platform_device *dev)
2450 struct sci_port *port = platform_get_drvdata(dev);
2452 cpufreq_unregister_notifier(&port->freq_transition,
2453 CPUFREQ_TRANSITION_NOTIFIER);
2455 uart_remove_one_port(&sci_uart_driver, &port->port);
2457 sci_cleanup_single(port);
2462 struct sci_port_info {
2464 unsigned int regtype;
2467 static const struct of_device_id of_sci_match[] = {
2469 .compatible = "renesas,scif",
2470 .data = &(const struct sci_port_info) {
2472 .regtype = SCIx_SH4_SCIF_REGTYPE,
2475 .compatible = "renesas,scifa",
2476 .data = &(const struct sci_port_info) {
2478 .regtype = SCIx_SCIFA_REGTYPE,
2481 .compatible = "renesas,scifb",
2482 .data = &(const struct sci_port_info) {
2484 .regtype = SCIx_SCIFB_REGTYPE,
2487 .compatible = "renesas,hscif",
2488 .data = &(const struct sci_port_info) {
2490 .regtype = SCIx_HSCIF_REGTYPE,
2496 MODULE_DEVICE_TABLE(of, of_sci_match);
2498 static struct plat_sci_port *
2499 sci_parse_dt(struct platform_device *pdev, unsigned int *dev_id)
2501 struct device_node *np = pdev->dev.of_node;
2502 const struct of_device_id *match;
2503 const struct sci_port_info *info;
2504 struct plat_sci_port *p;
2507 if (!IS_ENABLED(CONFIG_OF) || !np)
2510 match = of_match_node(of_sci_match, pdev->dev.of_node);
2516 p = devm_kzalloc(&pdev->dev, sizeof(struct plat_sci_port), GFP_KERNEL);
2518 dev_err(&pdev->dev, "failed to allocate DT config data\n");
2522 /* Get the line number for the aliases node. */
2523 id = of_alias_get_id(np, "serial");
2525 dev_err(&pdev->dev, "failed to get alias id (%d)\n", id);
2531 p->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
2532 p->type = info->type;
2533 p->regtype = info->regtype;
2534 p->scscr = SCSCR_RE | SCSCR_TE;
2539 static int sci_probe_single(struct platform_device *dev,
2541 struct plat_sci_port *p,
2542 struct sci_port *sciport)
2547 if (unlikely(index >= SCI_NPORTS)) {
2548 dev_notice(&dev->dev, "Attempting to register port %d when only %d are available\n",
2549 index+1, SCI_NPORTS);
2550 dev_notice(&dev->dev, "Consider bumping CONFIG_SERIAL_SH_SCI_NR_UARTS!\n");
2554 ret = sci_init_single(dev, sciport, index, p, false);
2558 ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
2560 sci_cleanup_single(sciport);
2567 static int sci_probe(struct platform_device *dev)
2569 struct plat_sci_port *p;
2570 struct sci_port *sp;
2571 unsigned int dev_id;
2575 * If we've come here via earlyprintk initialization, head off to
2576 * the special early probe. We don't have sufficient device state
2577 * to make it beyond this yet.
2579 if (is_early_platform_device(dev))
2580 return sci_probe_earlyprintk(dev);
2582 if (dev->dev.of_node) {
2583 p = sci_parse_dt(dev, &dev_id);
2587 p = dev->dev.platform_data;
2589 dev_err(&dev->dev, "no platform data supplied\n");
2596 sp = &sci_ports[dev_id];
2597 platform_set_drvdata(dev, sp);
2599 ret = sci_probe_single(dev, dev_id, p, sp);
2603 sp->freq_transition.notifier_call = sci_notifier;
2605 ret = cpufreq_register_notifier(&sp->freq_transition,
2606 CPUFREQ_TRANSITION_NOTIFIER);
2607 if (unlikely(ret < 0)) {
2608 uart_remove_one_port(&sci_uart_driver, &sp->port);
2609 sci_cleanup_single(sp);
2613 #ifdef CONFIG_SH_STANDARD_BIOS
2614 sh_bios_gdb_detach();
2620 static __maybe_unused int sci_suspend(struct device *dev)
2622 struct sci_port *sport = dev_get_drvdata(dev);
2625 uart_suspend_port(&sci_uart_driver, &sport->port);
2630 static __maybe_unused int sci_resume(struct device *dev)
2632 struct sci_port *sport = dev_get_drvdata(dev);
2635 uart_resume_port(&sci_uart_driver, &sport->port);
2640 static SIMPLE_DEV_PM_OPS(sci_dev_pm_ops, sci_suspend, sci_resume);
2642 static struct platform_driver sci_driver = {
2644 .remove = sci_remove,
2647 .pm = &sci_dev_pm_ops,
2648 .of_match_table = of_match_ptr(of_sci_match),
2652 static int __init sci_init(void)
2656 pr_info("%s\n", banner);
2658 ret = uart_register_driver(&sci_uart_driver);
2659 if (likely(ret == 0)) {
2660 ret = platform_driver_register(&sci_driver);
2662 uart_unregister_driver(&sci_uart_driver);
2668 static void __exit sci_exit(void)
2670 platform_driver_unregister(&sci_driver);
2671 uart_unregister_driver(&sci_uart_driver);
2674 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
2675 early_platform_init_buffer("earlyprintk", &sci_driver,
2676 early_serial_buf, ARRAY_SIZE(early_serial_buf));
2678 module_init(sci_init);
2679 module_exit(sci_exit);
2681 MODULE_LICENSE("GPL");
2682 MODULE_ALIAS("platform:sh-sci");
2683 MODULE_AUTHOR("Paul Mundt");
2684 MODULE_DESCRIPTION("SuperH (H)SCI(F) serial driver");