1 /* sunsab.c: ASYNC Driver for the SIEMENS SAB82532 DUSCC.
3 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
4 * Copyright (C) 2002, 2006 David S. Miller (davem@davemloft.net)
6 * Rewrote buffer handling to use CIRC(Circular Buffer) macros.
7 * Maxim Krasnyanskiy <maxk@qualcomm.com>
9 * Fixed to use tty_get_baud_rate, and to allow for arbitrary baud
10 * rates to be programmed into the UART. Also eliminated a lot of
11 * duplicated code in the console setup.
12 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
14 * Ported to new 2.5.x UART layer.
15 * David S. Miller <davem@davemloft.net>
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/errno.h>
21 #include <linux/tty.h>
22 #include <linux/tty_flip.h>
23 #include <linux/major.h>
24 #include <linux/string.h>
25 #include <linux/ptrace.h>
26 #include <linux/ioport.h>
27 #include <linux/circ_buf.h>
28 #include <linux/serial.h>
29 #include <linux/sysrq.h>
30 #include <linux/console.h>
31 #include <linux/spinlock.h>
32 #include <linux/slab.h>
33 #include <linux/delay.h>
34 #include <linux/init.h>
35 #include <linux/of_device.h>
40 #include <asm/setup.h>
42 #if defined(CONFIG_SERIAL_SUNSAB_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
46 #include <linux/serial_core.h>
47 #include <linux/sunserialcore.h>
51 struct uart_sunsab_port {
52 struct uart_port port; /* Generic UART port */
53 union sab82532_async_regs __iomem *regs; /* Chip registers */
54 unsigned long irqflags; /* IRQ state flags */
55 int dsr; /* Current DSR state */
56 unsigned int cec_timeout; /* Chip poll timeout... */
57 unsigned int tec_timeout; /* likewise */
58 unsigned char interrupt_mask0;/* ISR0 masking */
59 unsigned char interrupt_mask1;/* ISR1 masking */
60 unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */
61 unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */
62 unsigned int gis_shift;
63 int type; /* SAB82532 version */
65 /* Setting configuration bits while the transmitter is active
66 * can cause garbage characters to get emitted by the chip.
67 * Therefore, we cache such writes here and do the real register
68 * write the next time the transmitter becomes idle.
70 unsigned int cached_ebrg;
71 unsigned char cached_mode;
72 unsigned char cached_pvr;
73 unsigned char cached_dafo;
77 * This assumes you have a 29.4912 MHz clock for your UART.
79 #define SAB_BASE_BAUD ( 29491200 / 16 )
81 static char *sab82532_version[16] = {
82 "V1.0", "V2.0", "V3.2", "V(0x03)",
83 "V(0x04)", "V(0x05)", "V(0x06)", "V(0x07)",
84 "V(0x08)", "V(0x09)", "V(0x0a)", "V(0x0b)",
85 "V(0x0c)", "V(0x0d)", "V(0x0e)", "V(0x0f)"
88 #define SAB82532_MAX_TEC_TIMEOUT 200000 /* 1 character time (at 50 baud) */
89 #define SAB82532_MAX_CEC_TIMEOUT 50000 /* 2.5 TX CLKs (at 50 baud) */
91 #define SAB82532_RECV_FIFO_SIZE 32 /* Standard async fifo sizes */
92 #define SAB82532_XMIT_FIFO_SIZE 32
94 static __inline__ void sunsab_tec_wait(struct uart_sunsab_port *up)
96 int timeout = up->tec_timeout;
98 while ((readb(&up->regs->r.star) & SAB82532_STAR_TEC) && --timeout)
102 static __inline__ void sunsab_cec_wait(struct uart_sunsab_port *up)
104 int timeout = up->cec_timeout;
106 while ((readb(&up->regs->r.star) & SAB82532_STAR_CEC) && --timeout)
110 static struct tty_port *
111 receive_chars(struct uart_sunsab_port *up,
112 union sab82532_irq_status *stat)
114 struct tty_port *port = NULL;
115 unsigned char buf[32];
116 int saw_console_brk = 0;
121 if (up->port.state != NULL) /* Unopened serial console */
122 port = &up->port.state->port;
124 /* Read number of BYTES (Character + Status) available. */
125 if (stat->sreg.isr0 & SAB82532_ISR0_RPF) {
126 count = SAB82532_RECV_FIFO_SIZE;
130 if (stat->sreg.isr0 & SAB82532_ISR0_TCD) {
131 count = readb(&up->regs->r.rbcl) & (SAB82532_RECV_FIFO_SIZE - 1);
135 /* Issue a FIFO read command in case we where idle. */
136 if (stat->sreg.isr0 & SAB82532_ISR0_TIME) {
138 writeb(SAB82532_CMDR_RFRD, &up->regs->w.cmdr);
142 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
146 for (i = 0; i < count; i++)
147 buf[i] = readb(&up->regs->r.rfifo[i]);
149 /* Issue Receive Message Complete command. */
152 writeb(SAB82532_CMDR_RMC, &up->regs->w.cmdr);
155 /* Count may be zero for BRK, so we check for it here */
156 if ((stat->sreg.isr1 & SAB82532_ISR1_BRK) &&
157 (up->port.line == up->port.cons->index))
161 if (unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
162 stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
164 up->port.icount.brk++;
165 uart_handle_break(&up->port);
169 for (i = 0; i < count; i++) {
170 unsigned char ch = buf[i], flag;
173 up->port.icount.rx++;
175 if (unlikely(stat->sreg.isr0 & (SAB82532_ISR0_PERR |
177 SAB82532_ISR0_RFO)) ||
178 unlikely(stat->sreg.isr1 & SAB82532_ISR1_BRK)) {
180 * For statistics only
182 if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
183 stat->sreg.isr0 &= ~(SAB82532_ISR0_PERR |
185 up->port.icount.brk++;
187 * We do the SysRQ and SAK checking
188 * here because otherwise the break
189 * may get masked by ignore_status_mask
190 * or read_status_mask.
192 if (uart_handle_break(&up->port))
194 } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
195 up->port.icount.parity++;
196 else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
197 up->port.icount.frame++;
198 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
199 up->port.icount.overrun++;
202 * Mask off conditions which should be ingored.
204 stat->sreg.isr0 &= (up->port.read_status_mask & 0xff);
205 stat->sreg.isr1 &= ((up->port.read_status_mask >> 8) & 0xff);
207 if (stat->sreg.isr1 & SAB82532_ISR1_BRK) {
209 } else if (stat->sreg.isr0 & SAB82532_ISR0_PERR)
211 else if (stat->sreg.isr0 & SAB82532_ISR0_FERR)
215 if (uart_handle_sysrq_char(&up->port, ch) || !port)
218 if ((stat->sreg.isr0 & (up->port.ignore_status_mask & 0xff)) == 0 &&
219 (stat->sreg.isr1 & ((up->port.ignore_status_mask >> 8) & 0xff)) == 0)
220 tty_insert_flip_char(port, ch, flag);
221 if (stat->sreg.isr0 & SAB82532_ISR0_RFO)
222 tty_insert_flip_char(port, 0, TTY_OVERRUN);
231 static void sunsab_stop_tx(struct uart_port *);
232 static void sunsab_tx_idle(struct uart_sunsab_port *);
234 static void transmit_chars(struct uart_sunsab_port *up,
235 union sab82532_irq_status *stat)
237 struct circ_buf *xmit = &up->port.state->xmit;
240 if (stat->sreg.isr1 & SAB82532_ISR1_ALLS) {
241 up->interrupt_mask1 |= SAB82532_IMR1_ALLS;
242 writeb(up->interrupt_mask1, &up->regs->w.imr1);
243 set_bit(SAB82532_ALLS, &up->irqflags);
246 #if 0 /* bde@nwlink.com says this check causes problems */
247 if (!(stat->sreg.isr1 & SAB82532_ISR1_XPR))
251 if (!(readb(&up->regs->r.star) & SAB82532_STAR_XFW))
254 set_bit(SAB82532_XPR, &up->irqflags);
257 if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
258 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
259 writeb(up->interrupt_mask1, &up->regs->w.imr1);
263 up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
264 writeb(up->interrupt_mask1, &up->regs->w.imr1);
265 clear_bit(SAB82532_ALLS, &up->irqflags);
267 /* Stuff 32 bytes into Transmit FIFO. */
268 clear_bit(SAB82532_XPR, &up->irqflags);
269 for (i = 0; i < up->port.fifosize; i++) {
270 writeb(xmit->buf[xmit->tail],
271 &up->regs->w.xfifo[i]);
272 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
273 up->port.icount.tx++;
274 if (uart_circ_empty(xmit))
278 /* Issue a Transmit Frame command. */
280 writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
282 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
283 uart_write_wakeup(&up->port);
285 if (uart_circ_empty(xmit))
286 sunsab_stop_tx(&up->port);
289 static void check_status(struct uart_sunsab_port *up,
290 union sab82532_irq_status *stat)
292 if (stat->sreg.isr0 & SAB82532_ISR0_CDSC)
293 uart_handle_dcd_change(&up->port,
294 !(readb(&up->regs->r.vstr) & SAB82532_VSTR_CD));
296 if (stat->sreg.isr1 & SAB82532_ISR1_CSC)
297 uart_handle_cts_change(&up->port,
298 (readb(&up->regs->r.star) & SAB82532_STAR_CTS));
300 if ((readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ^ up->dsr) {
301 up->dsr = (readb(&up->regs->r.pvr) & up->pvr_dsr_bit) ? 0 : 1;
302 up->port.icount.dsr++;
305 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
308 static irqreturn_t sunsab_interrupt(int irq, void *dev_id)
310 struct uart_sunsab_port *up = dev_id;
311 struct tty_port *port = NULL;
312 union sab82532_irq_status status;
316 spin_lock_irqsave(&up->port.lock, flags);
319 gis = readb(&up->regs->r.gis) >> up->gis_shift;
321 status.sreg.isr0 = readb(&up->regs->r.isr0);
323 status.sreg.isr1 = readb(&up->regs->r.isr1);
326 if ((status.sreg.isr0 & (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
327 SAB82532_ISR0_RFO | SAB82532_ISR0_RPF)) ||
328 (status.sreg.isr1 & SAB82532_ISR1_BRK))
329 port = receive_chars(up, &status);
330 if ((status.sreg.isr0 & SAB82532_ISR0_CDSC) ||
331 (status.sreg.isr1 & SAB82532_ISR1_CSC))
332 check_status(up, &status);
333 if (status.sreg.isr1 & (SAB82532_ISR1_ALLS | SAB82532_ISR1_XPR))
334 transmit_chars(up, &status);
337 spin_unlock_irqrestore(&up->port.lock, flags);
340 tty_flip_buffer_push(port);
345 /* port->lock is not held. */
346 static unsigned int sunsab_tx_empty(struct uart_port *port)
348 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
351 /* Do not need a lock for a state test like this. */
352 if (test_bit(SAB82532_ALLS, &up->irqflags))
360 /* port->lock held by caller. */
361 static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
363 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
365 if (mctrl & TIOCM_RTS) {
366 up->cached_mode &= ~SAB82532_MODE_FRTS;
367 up->cached_mode |= SAB82532_MODE_RTS;
369 up->cached_mode |= (SAB82532_MODE_FRTS |
372 if (mctrl & TIOCM_DTR) {
373 up->cached_pvr &= ~(up->pvr_dtr_bit);
375 up->cached_pvr |= up->pvr_dtr_bit;
378 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
379 if (test_bit(SAB82532_XPR, &up->irqflags))
383 /* port->lock is held by caller and interrupts are disabled. */
384 static unsigned int sunsab_get_mctrl(struct uart_port *port)
386 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
392 val = readb(&up->regs->r.pvr);
393 result |= (val & up->pvr_dsr_bit) ? 0 : TIOCM_DSR;
395 val = readb(&up->regs->r.vstr);
396 result |= (val & SAB82532_VSTR_CD) ? 0 : TIOCM_CAR;
398 val = readb(&up->regs->r.star);
399 result |= (val & SAB82532_STAR_CTS) ? TIOCM_CTS : 0;
404 /* port->lock held by caller. */
405 static void sunsab_stop_tx(struct uart_port *port)
407 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
409 up->interrupt_mask1 |= SAB82532_IMR1_XPR;
410 writeb(up->interrupt_mask1, &up->regs->w.imr1);
413 /* port->lock held by caller. */
414 static void sunsab_tx_idle(struct uart_sunsab_port *up)
416 if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
419 clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
420 writeb(up->cached_mode, &up->regs->rw.mode);
421 writeb(up->cached_pvr, &up->regs->rw.pvr);
422 writeb(up->cached_dafo, &up->regs->w.dafo);
424 writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
425 tmp = readb(&up->regs->rw.ccr2);
427 tmp |= (up->cached_ebrg >> 2) & 0xc0;
428 writeb(tmp, &up->regs->rw.ccr2);
432 /* port->lock held by caller. */
433 static void sunsab_start_tx(struct uart_port *port)
435 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
436 struct circ_buf *xmit = &up->port.state->xmit;
439 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
442 up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
443 writeb(up->interrupt_mask1, &up->regs->w.imr1);
445 if (!test_bit(SAB82532_XPR, &up->irqflags))
448 clear_bit(SAB82532_ALLS, &up->irqflags);
449 clear_bit(SAB82532_XPR, &up->irqflags);
451 for (i = 0; i < up->port.fifosize; i++) {
452 writeb(xmit->buf[xmit->tail],
453 &up->regs->w.xfifo[i]);
454 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
455 up->port.icount.tx++;
456 if (uart_circ_empty(xmit))
460 /* Issue a Transmit Frame command. */
462 writeb(SAB82532_CMDR_XF, &up->regs->w.cmdr);
465 /* port->lock is not held. */
466 static void sunsab_send_xchar(struct uart_port *port, char ch)
468 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
471 if (ch == __DISABLED_CHAR)
474 spin_lock_irqsave(&up->port.lock, flags);
477 writeb(ch, &up->regs->w.tic);
479 spin_unlock_irqrestore(&up->port.lock, flags);
482 /* port->lock held by caller. */
483 static void sunsab_stop_rx(struct uart_port *port)
485 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
487 up->interrupt_mask0 |= SAB82532_IMR0_TCD;
488 writeb(up->interrupt_mask1, &up->regs->w.imr0);
491 /* port->lock is not held. */
492 static void sunsab_break_ctl(struct uart_port *port, int break_state)
494 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
498 spin_lock_irqsave(&up->port.lock, flags);
500 val = up->cached_dafo;
502 val |= SAB82532_DAFO_XBRK;
504 val &= ~SAB82532_DAFO_XBRK;
505 up->cached_dafo = val;
507 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
508 if (test_bit(SAB82532_XPR, &up->irqflags))
511 spin_unlock_irqrestore(&up->port.lock, flags);
514 /* port->lock is not held. */
515 static int sunsab_startup(struct uart_port *port)
517 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
520 int err = request_irq(up->port.irq, sunsab_interrupt,
521 IRQF_SHARED, "sab", up);
525 spin_lock_irqsave(&up->port.lock, flags);
528 * Wait for any commands or immediate characters
534 * Clear the FIFO buffers.
536 writeb(SAB82532_CMDR_RRES, &up->regs->w.cmdr);
538 writeb(SAB82532_CMDR_XRES, &up->regs->w.cmdr);
541 * Clear the interrupt registers.
543 (void) readb(&up->regs->r.isr0);
544 (void) readb(&up->regs->r.isr1);
547 * Now, initialize the UART
549 writeb(0, &up->regs->w.ccr0); /* power-down */
550 writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
551 SAB82532_CCR0_SM_ASYNC, &up->regs->w.ccr0);
552 writeb(SAB82532_CCR1_ODS | SAB82532_CCR1_BCR | 7, &up->regs->w.ccr1);
553 writeb(SAB82532_CCR2_BDF | SAB82532_CCR2_SSEL |
554 SAB82532_CCR2_TOE, &up->regs->w.ccr2);
555 writeb(0, &up->regs->w.ccr3);
556 writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
557 up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
559 writeb(up->cached_mode, &up->regs->w.mode);
560 writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
562 tmp = readb(&up->regs->rw.ccr0);
563 tmp |= SAB82532_CCR0_PU; /* power-up */
564 writeb(tmp, &up->regs->rw.ccr0);
567 * Finally, enable interrupts
569 up->interrupt_mask0 = (SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
571 writeb(up->interrupt_mask0, &up->regs->w.imr0);
572 up->interrupt_mask1 = (SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
573 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
574 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
576 writeb(up->interrupt_mask1, &up->regs->w.imr1);
577 set_bit(SAB82532_ALLS, &up->irqflags);
578 set_bit(SAB82532_XPR, &up->irqflags);
580 spin_unlock_irqrestore(&up->port.lock, flags);
585 /* port->lock is not held. */
586 static void sunsab_shutdown(struct uart_port *port)
588 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
591 spin_lock_irqsave(&up->port.lock, flags);
593 /* Disable Interrupts */
594 up->interrupt_mask0 = 0xff;
595 writeb(up->interrupt_mask0, &up->regs->w.imr0);
596 up->interrupt_mask1 = 0xff;
597 writeb(up->interrupt_mask1, &up->regs->w.imr1);
599 /* Disable break condition */
600 up->cached_dafo = readb(&up->regs->rw.dafo);
601 up->cached_dafo &= ~SAB82532_DAFO_XBRK;
602 writeb(up->cached_dafo, &up->regs->rw.dafo);
604 /* Disable Receiver */
605 up->cached_mode &= ~SAB82532_MODE_RAC;
606 writeb(up->cached_mode, &up->regs->rw.mode);
611 * If the chip is powered down here the system hangs/crashes during
612 * reboot or shutdown. This needs to be investigated further,
613 * similar behaviour occurs in 2.4 when the driver is configured
614 * as a module only. One hint may be that data is sometimes
615 * transmitted at 9600 baud during shutdown (regardless of the
616 * speed the chip was configured for when the port was open).
620 tmp = readb(&up->regs->rw.ccr0);
621 tmp &= ~SAB82532_CCR0_PU;
622 writeb(tmp, &up->regs->rw.ccr0);
625 spin_unlock_irqrestore(&up->port.lock, flags);
626 free_irq(up->port.irq, up);
630 * This is used to figure out the divisor speeds.
632 * The formula is: Baud = SAB_BASE_BAUD / ((N + 1) * (1 << M)),
634 * with 0 <= N < 64 and 0 <= M < 16
637 static void calc_ebrg(int baud, int *n_ret, int *m_ret)
648 * We scale numbers by 10 so that we get better accuracy
649 * without having to use floating point. Here we increment m
650 * until n is within the valid range.
652 n = (SAB_BASE_BAUD * 10) / baud;
660 * We try very hard to avoid speeds with M == 0 since they may
661 * not work correctly for XTAL frequences above 10 MHz.
663 if ((m == 0) && ((n & 1) == 0)) {
671 /* Internal routine, port->lock is held and local interrupts are disabled. */
672 static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cflag,
673 unsigned int iflag, unsigned int baud,
679 /* Byte size and parity */
680 switch (cflag & CSIZE) {
681 case CS5: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
682 case CS6: dafo = SAB82532_DAFO_CHL6; bits = 8; break;
683 case CS7: dafo = SAB82532_DAFO_CHL7; bits = 9; break;
684 case CS8: dafo = SAB82532_DAFO_CHL8; bits = 10; break;
685 /* Never happens, but GCC is too dumb to figure it out */
686 default: dafo = SAB82532_DAFO_CHL5; bits = 7; break;
689 if (cflag & CSTOPB) {
690 dafo |= SAB82532_DAFO_STOP;
694 if (cflag & PARENB) {
695 dafo |= SAB82532_DAFO_PARE;
699 if (cflag & PARODD) {
700 dafo |= SAB82532_DAFO_PAR_ODD;
702 dafo |= SAB82532_DAFO_PAR_EVEN;
704 up->cached_dafo = dafo;
706 calc_ebrg(baud, &n, &m);
708 up->cached_ebrg = n | (m << 6);
710 up->tec_timeout = (10 * 1000000) / baud;
711 up->cec_timeout = up->tec_timeout >> 2;
713 /* CTS flow control flags */
714 /* We encode read_status_mask and ignore_status_mask like so:
716 * ---------------------
717 * | ... | ISR1 | ISR0 |
718 * ---------------------
722 up->port.read_status_mask = (SAB82532_ISR0_TCD | SAB82532_ISR0_TIME |
723 SAB82532_ISR0_RFO | SAB82532_ISR0_RPF |
725 up->port.read_status_mask |= (SAB82532_ISR1_CSC |
727 SAB82532_ISR1_XPR) << 8;
729 up->port.read_status_mask |= (SAB82532_ISR0_PERR |
731 if (iflag & (IGNBRK | BRKINT | PARMRK))
732 up->port.read_status_mask |= (SAB82532_ISR1_BRK << 8);
735 * Characteres to ignore
737 up->port.ignore_status_mask = 0;
739 up->port.ignore_status_mask |= (SAB82532_ISR0_PERR |
741 if (iflag & IGNBRK) {
742 up->port.ignore_status_mask |= (SAB82532_ISR1_BRK << 8);
744 * If we're ignoring parity and break indicators,
745 * ignore overruns too (for real raw support).
748 up->port.ignore_status_mask |= SAB82532_ISR0_RFO;
752 * ignore all characters if CREAD is not set
754 if ((cflag & CREAD) == 0)
755 up->port.ignore_status_mask |= (SAB82532_ISR0_RPF |
758 uart_update_timeout(&up->port, cflag,
759 (up->port.uartclk / (16 * quot)));
761 /* Now schedule a register update when the chip's
762 * transmitter is idle.
764 up->cached_mode |= SAB82532_MODE_RAC;
765 set_bit(SAB82532_REGS_PENDING, &up->irqflags);
766 if (test_bit(SAB82532_XPR, &up->irqflags))
770 /* port->lock is not held. */
771 static void sunsab_set_termios(struct uart_port *port, struct ktermios *termios,
772 struct ktermios *old)
774 struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
776 unsigned int baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
777 unsigned int quot = uart_get_divisor(port, baud);
779 spin_lock_irqsave(&up->port.lock, flags);
780 sunsab_convert_to_sab(up, termios->c_cflag, termios->c_iflag, baud, quot);
781 spin_unlock_irqrestore(&up->port.lock, flags);
784 static const char *sunsab_type(struct uart_port *port)
786 struct uart_sunsab_port *up = (void *)port;
789 sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
793 static void sunsab_release_port(struct uart_port *port)
797 static int sunsab_request_port(struct uart_port *port)
802 static void sunsab_config_port(struct uart_port *port, int flags)
806 static int sunsab_verify_port(struct uart_port *port, struct serial_struct *ser)
811 static struct uart_ops sunsab_pops = {
812 .tx_empty = sunsab_tx_empty,
813 .set_mctrl = sunsab_set_mctrl,
814 .get_mctrl = sunsab_get_mctrl,
815 .stop_tx = sunsab_stop_tx,
816 .start_tx = sunsab_start_tx,
817 .send_xchar = sunsab_send_xchar,
818 .stop_rx = sunsab_stop_rx,
819 .break_ctl = sunsab_break_ctl,
820 .startup = sunsab_startup,
821 .shutdown = sunsab_shutdown,
822 .set_termios = sunsab_set_termios,
824 .release_port = sunsab_release_port,
825 .request_port = sunsab_request_port,
826 .config_port = sunsab_config_port,
827 .verify_port = sunsab_verify_port,
830 static struct uart_driver sunsab_reg = {
831 .owner = THIS_MODULE,
832 .driver_name = "sunsab",
837 static struct uart_sunsab_port *sunsab_ports;
839 #ifdef CONFIG_SERIAL_SUNSAB_CONSOLE
841 static void sunsab_console_putchar(struct uart_port *port, int c)
843 struct uart_sunsab_port *up = (struct uart_sunsab_port *)port;
846 writeb(c, &up->regs->w.tic);
849 static void sunsab_console_write(struct console *con, const char *s, unsigned n)
851 struct uart_sunsab_port *up = &sunsab_ports[con->index];
855 if (up->port.sysrq || oops_in_progress)
856 locked = spin_trylock_irqsave(&up->port.lock, flags);
858 spin_lock_irqsave(&up->port.lock, flags);
860 uart_console_write(&up->port, s, n, sunsab_console_putchar);
864 spin_unlock_irqrestore(&up->port.lock, flags);
867 static int sunsab_console_setup(struct console *con, char *options)
869 struct uart_sunsab_port *up = &sunsab_ports[con->index];
871 unsigned int baud, quot;
874 * The console framework calls us for each and every port
875 * registered. Defer the console setup until the requested
876 * port has been properly discovered. A bit of a hack,
879 if (up->port.type != PORT_SUNSAB)
882 printk("Console: ttyS%d (SAB82532)\n",
883 (sunsab_reg.minor - 64) + con->index);
885 sunserial_console_termios(con, up->port.dev->of_node);
887 switch (con->cflag & CBAUD) {
888 case B150: baud = 150; break;
889 case B300: baud = 300; break;
890 case B600: baud = 600; break;
891 case B1200: baud = 1200; break;
892 case B2400: baud = 2400; break;
893 case B4800: baud = 4800; break;
894 default: case B9600: baud = 9600; break;
895 case B19200: baud = 19200; break;
896 case B38400: baud = 38400; break;
897 case B57600: baud = 57600; break;
898 case B115200: baud = 115200; break;
899 case B230400: baud = 230400; break;
900 case B460800: baud = 460800; break;
906 spin_lock_init(&up->port.lock);
909 * Initialize the hardware
911 sunsab_startup(&up->port);
913 spin_lock_irqsave(&up->port.lock, flags);
916 * Finally, enable interrupts
918 up->interrupt_mask0 = SAB82532_IMR0_PERR | SAB82532_IMR0_FERR |
919 SAB82532_IMR0_PLLA | SAB82532_IMR0_CDSC;
920 writeb(up->interrupt_mask0, &up->regs->w.imr0);
921 up->interrupt_mask1 = SAB82532_IMR1_BRKT | SAB82532_IMR1_ALLS |
922 SAB82532_IMR1_XOFF | SAB82532_IMR1_TIN |
923 SAB82532_IMR1_CSC | SAB82532_IMR1_XON |
925 writeb(up->interrupt_mask1, &up->regs->w.imr1);
927 quot = uart_get_divisor(&up->port, baud);
928 sunsab_convert_to_sab(up, con->cflag, 0, baud, quot);
929 sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
931 spin_unlock_irqrestore(&up->port.lock, flags);
936 static struct console sunsab_console = {
938 .write = sunsab_console_write,
939 .device = uart_console_device,
940 .setup = sunsab_console_setup,
941 .flags = CON_PRINTBUFFER,
946 static inline struct console *SUNSAB_CONSOLE(void)
948 return &sunsab_console;
951 #define SUNSAB_CONSOLE() (NULL)
952 #define sunsab_console_init() do { } while (0)
955 static int sunsab_init_one(struct uart_sunsab_port *up,
956 struct platform_device *op,
957 unsigned long offset,
960 up->port.line = line;
961 up->port.dev = &op->dev;
963 up->port.mapbase = op->resource[0].start + offset;
964 up->port.membase = of_ioremap(&op->resource[0], offset,
965 sizeof(union sab82532_async_regs),
967 if (!up->port.membase)
969 up->regs = (union sab82532_async_regs __iomem *) up->port.membase;
971 up->port.irq = op->archdata.irqs[0];
973 up->port.fifosize = SAB82532_XMIT_FIFO_SIZE;
974 up->port.iotype = UPIO_MEM;
976 writeb(SAB82532_IPC_IC_ACT_LOW, &up->regs->w.ipc);
978 up->port.ops = &sunsab_pops;
979 up->port.type = PORT_SUNSAB;
980 up->port.uartclk = SAB_BASE_BAUD;
982 up->type = readb(&up->regs->r.vstr) & 0x0f;
983 writeb(~((1 << 1) | (1 << 2) | (1 << 4)), &up->regs->w.pcr);
984 writeb(0xff, &up->regs->w.pim);
985 if ((up->port.line & 0x1) == 0) {
986 up->pvr_dsr_bit = (1 << 0);
987 up->pvr_dtr_bit = (1 << 1);
990 up->pvr_dsr_bit = (1 << 3);
991 up->pvr_dtr_bit = (1 << 2);
994 up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
995 writeb(up->cached_pvr, &up->regs->w.pvr);
996 up->cached_mode = readb(&up->regs->rw.mode);
997 up->cached_mode |= SAB82532_MODE_FRTS;
998 writeb(up->cached_mode, &up->regs->rw.mode);
999 up->cached_mode |= SAB82532_MODE_RTS;
1000 writeb(up->cached_mode, &up->regs->rw.mode);
1002 up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
1003 up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
1008 static int sab_probe(struct platform_device *op)
1011 struct uart_sunsab_port *up;
1014 up = &sunsab_ports[inst * 2];
1016 err = sunsab_init_one(&up[0], op,
1022 err = sunsab_init_one(&up[1], op,
1023 sizeof(union sab82532_async_regs),
1028 sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
1029 &sunsab_reg, up[0].port.line,
1032 sunserial_console_match(SUNSAB_CONSOLE(), op->dev.of_node,
1033 &sunsab_reg, up[1].port.line,
1036 err = uart_add_one_port(&sunsab_reg, &up[0].port);
1040 err = uart_add_one_port(&sunsab_reg, &up[1].port);
1044 platform_set_drvdata(op, &up[0]);
1051 uart_remove_one_port(&sunsab_reg, &up[0].port);
1053 of_iounmap(&op->resource[0],
1055 sizeof(union sab82532_async_regs));
1057 of_iounmap(&op->resource[0],
1059 sizeof(union sab82532_async_regs));
1064 static int sab_remove(struct platform_device *op)
1066 struct uart_sunsab_port *up = platform_get_drvdata(op);
1068 uart_remove_one_port(&sunsab_reg, &up[1].port);
1069 uart_remove_one_port(&sunsab_reg, &up[0].port);
1070 of_iounmap(&op->resource[0],
1072 sizeof(union sab82532_async_regs));
1073 of_iounmap(&op->resource[0],
1075 sizeof(union sab82532_async_regs));
1080 static const struct of_device_id sab_match[] = {
1086 .compatible = "sab82532",
1090 MODULE_DEVICE_TABLE(of, sab_match);
1092 static struct platform_driver sab_driver = {
1095 .owner = THIS_MODULE,
1096 .of_match_table = sab_match,
1099 .remove = sab_remove,
1102 static int __init sunsab_init(void)
1104 struct device_node *dp;
1106 int num_channels = 0;
1108 for_each_node_by_name(dp, "se")
1110 for_each_node_by_name(dp, "serial") {
1111 if (of_device_is_compatible(dp, "sab82532"))
1116 sunsab_ports = kzalloc(sizeof(struct uart_sunsab_port) *
1117 num_channels, GFP_KERNEL);
1121 err = sunserial_register_minors(&sunsab_reg, num_channels);
1123 kfree(sunsab_ports);
1124 sunsab_ports = NULL;
1130 return platform_driver_register(&sab_driver);
1133 static void __exit sunsab_exit(void)
1135 platform_driver_unregister(&sab_driver);
1136 if (sunsab_reg.nr) {
1137 sunserial_unregister_minors(&sunsab_reg, sunsab_reg.nr);
1140 kfree(sunsab_ports);
1141 sunsab_ports = NULL;
1144 module_init(sunsab_init);
1145 module_exit(sunsab_exit);
1147 MODULE_AUTHOR("Eddie C. Dost and David S. Miller");
1148 MODULE_DESCRIPTION("Sun SAB82532 serial port driver");
1149 MODULE_LICENSE("GPL");