2 * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
4 * Device driver for Microgate SyncLink Multiport
5 * high speed multiprotocol serial adapter.
7 * written by Paul Fulghum for Microgate Corporation
10 * Microgate and SyncLink are trademarks of Microgate Corporation
12 * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
13 * This code is released under the GNU General Public License (GPL)
15 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
16 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
19 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
21 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
22 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
23 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
24 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
25 * OF THE POSSIBILITY OF SUCH DAMAGE.
28 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
30 # define BREAKPOINT() asm(" int $3");
32 # define BREAKPOINT() { }
35 #define MAX_DEVICES 12
37 #include <linux/module.h>
38 #include <linux/errno.h>
39 #include <linux/signal.h>
40 #include <linux/sched.h>
41 #include <linux/timer.h>
42 #include <linux/interrupt.h>
43 #include <linux/pci.h>
44 #include <linux/tty.h>
45 #include <linux/tty_flip.h>
46 #include <linux/serial.h>
47 #include <linux/major.h>
48 #include <linux/string.h>
49 #include <linux/fcntl.h>
50 #include <linux/ptrace.h>
51 #include <linux/ioport.h>
53 #include <linux/seq_file.h>
54 #include <linux/slab.h>
55 #include <linux/netdevice.h>
56 #include <linux/vmalloc.h>
57 #include <linux/init.h>
58 #include <linux/delay.h>
59 #include <linux/ioctl.h>
61 #include <asm/system.h>
65 #include <linux/bitops.h>
66 #include <asm/types.h>
67 #include <linux/termios.h>
68 #include <linux/workqueue.h>
69 #include <linux/hdlc.h>
70 #include <linux/synclink.h>
72 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
73 #define SYNCLINK_GENERIC_HDLC 1
75 #define SYNCLINK_GENERIC_HDLC 0
78 #define GET_USER(error,value,addr) error = get_user(value,addr)
79 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
80 #define PUT_USER(error,value,addr) error = put_user(value,addr)
81 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
83 #include <asm/uaccess.h>
85 static MGSL_PARAMS default_params = {
86 MGSL_MODE_HDLC, /* unsigned long mode */
87 0, /* unsigned char loopback; */
88 HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
89 HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
90 0, /* unsigned long clock_speed; */
91 0xff, /* unsigned char addr_filter; */
92 HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
93 HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
94 HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
95 9600, /* unsigned long data_rate; */
96 8, /* unsigned char data_bits; */
97 1, /* unsigned char stop_bits; */
98 ASYNC_PARITY_NONE /* unsigned char parity; */
101 /* size in bytes of DMA data buffers */
102 #define SCABUFSIZE 1024
103 #define SCA_MEM_SIZE 0x40000
104 #define SCA_BASE_SIZE 512
105 #define SCA_REG_SIZE 16
106 #define SCA_MAX_PORTS 4
107 #define SCAMAXDESC 128
109 #define BUFFERLISTSIZE 4096
111 /* SCA-I style DMA buffer descriptor */
112 typedef struct _SCADESC
114 u16 next; /* lower l6 bits of next descriptor addr */
115 u16 buf_ptr; /* lower 16 bits of buffer addr */
116 u8 buf_base; /* upper 8 bits of buffer addr */
118 u16 length; /* length of buffer */
119 u8 status; /* status of buffer */
121 } SCADESC, *PSCADESC;
123 typedef struct _SCADESC_EX
125 /* device driver bookkeeping section */
126 char *virt_addr; /* virtual address of data buffer */
127 u16 phys_entry; /* lower 16-bits of physical address of this descriptor */
128 } SCADESC_EX, *PSCADESC_EX;
130 /* The queue of BH actions to be performed */
133 #define BH_TRANSMIT 2
136 #define IO_PIN_SHUTDOWN_LIMIT 100
138 struct _input_signal_events {
150 * Device instance data structure
152 typedef struct _synclinkmp_info {
153 void *if_ptr; /* General purpose pointer (used by SPPP) */
155 struct tty_port port;
157 unsigned short close_delay;
158 unsigned short closing_wait; /* time to wait before closing */
160 struct mgsl_icount icount;
163 int x_char; /* xon/xoff character */
164 u16 read_status_mask1; /* break detection (SR1 indications) */
165 u16 read_status_mask2; /* parity/framing/overun (SR2 indications) */
166 unsigned char ignore_status_mask1; /* break detection (SR1 indications) */
167 unsigned char ignore_status_mask2; /* parity/framing/overun (SR2 indications) */
168 unsigned char *tx_buf;
173 wait_queue_head_t status_event_wait_q;
174 wait_queue_head_t event_wait_q;
175 struct timer_list tx_timer; /* HDLC transmit timeout timer */
176 struct _synclinkmp_info *next_device; /* device list link */
177 struct timer_list status_timer; /* input signal status check timer */
179 spinlock_t lock; /* spinlock for synchronizing with ISR */
180 struct work_struct task; /* task structure for scheduling bh */
182 u32 max_frame_size; /* as set by device config */
186 bool bh_running; /* Protection from multiple */
190 int dcd_chkcount; /* check counts to prevent */
191 int cts_chkcount; /* too many IRQs if a signal */
192 int dsr_chkcount; /* is floating */
195 char *buffer_list; /* virtual address of Rx & Tx buffer lists */
196 unsigned long buffer_list_phys;
198 unsigned int rx_buf_count; /* count of total allocated Rx buffers */
199 SCADESC *rx_buf_list; /* list of receive buffer entries */
200 SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
201 unsigned int current_rx_buf;
203 unsigned int tx_buf_count; /* count of total allocated Tx buffers */
204 SCADESC *tx_buf_list; /* list of transmit buffer entries */
205 SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
206 unsigned int last_tx_buf;
208 unsigned char *tmp_rx_buf;
209 unsigned int tmp_rx_buf_count;
218 unsigned char ie0_value;
219 unsigned char ie1_value;
220 unsigned char ie2_value;
221 unsigned char ctrlreg_value;
222 unsigned char old_signals;
224 char device_name[25]; /* device instance name */
230 struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
232 unsigned int bus_type; /* expansion bus type (ISA,EISA,PCI) */
234 unsigned int irq_level; /* interrupt level */
235 unsigned long irq_flags;
236 bool irq_requested; /* true if IRQ requested */
238 MGSL_PARAMS params; /* communications parameters */
240 unsigned char serial_signals; /* current serial signal states */
242 bool irq_occurred; /* for diagnostics use */
243 unsigned int init_error; /* Initialization startup error */
246 unsigned char* memory_base; /* shared memory address (PCI only) */
247 u32 phys_memory_base;
248 int shared_mem_requested;
250 unsigned char* sca_base; /* HD64570 SCA Memory address */
253 bool sca_base_requested;
255 unsigned char* lcr_base; /* local config registers (PCI only) */
258 int lcr_mem_requested;
260 unsigned char* statctrl_base; /* status/control register memory */
261 u32 phys_statctrl_base;
263 bool sca_statctrl_requested;
266 char flag_buf[MAX_ASYNC_BUFFER_SIZE];
267 char char_buf[MAX_ASYNC_BUFFER_SIZE];
268 bool drop_rts_on_tx_done;
270 struct _input_signal_events input_signal_events;
272 /* SPPP/Cisco HDLC device parts */
276 #if SYNCLINK_GENERIC_HDLC
277 struct net_device *netdev;
282 #define MGSL_MAGIC 0x5401
285 * define serial signal status change macros
287 #define MISCSTATUS_DCD_LATCHED (SerialSignal_DCD<<8) /* indicates change in DCD */
288 #define MISCSTATUS_RI_LATCHED (SerialSignal_RI<<8) /* indicates change in RI */
289 #define MISCSTATUS_CTS_LATCHED (SerialSignal_CTS<<8) /* indicates change in CTS */
290 #define MISCSTATUS_DSR_LATCHED (SerialSignal_DSR<<8) /* change in DSR */
292 /* Common Register macros */
311 /* MSCI Register macros */
341 /* Timer Register Macros */
351 /* DMA Controller Register macros */
382 /* combine with timer or DMA register address */
390 /* SCA Command Codes */
393 #define TXENABLE 0x02
394 #define TXDISABLE 0x03
395 #define TXCRCINIT 0x04
396 #define TXCRCEXCL 0x05
400 #define TXBUFCLR 0x09
402 #define RXENABLE 0x12
403 #define RXDISABLE 0x13
404 #define RXCRCINIT 0x14
405 #define RXREJECT 0x15
406 #define SEARCHMP 0x16
407 #define RXCRCEXCL 0x17
408 #define RXCRCCALC 0x18
412 /* DMA command codes */
414 #define FEICLEAR 0x02
448 * Global linked list of SyncLink devices
450 static SLMP_INFO *synclinkmp_device_list = NULL;
451 static int synclinkmp_adapter_count = -1;
452 static int synclinkmp_device_count = 0;
455 * Set this param to non-zero to load eax with the
456 * .text section address and breakpoint on module load.
457 * This is useful for use with gdb and add-symbol-file command.
459 static bool break_on_load = 0;
462 * Driver major number, defaults to zero to get auto
463 * assigned major number. May be forced as module parameter.
465 static int ttymajor = 0;
468 * Array of user specified options for ISA adapters.
470 static int debug_level = 0;
471 static int maxframe[MAX_DEVICES] = {0,};
473 module_param(break_on_load, bool, 0);
474 module_param(ttymajor, int, 0);
475 module_param(debug_level, int, 0);
476 module_param_array(maxframe, int, NULL, 0);
478 static char *driver_name = "SyncLink MultiPort driver";
479 static char *driver_version = "$Revision: 4.38 $";
481 static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
482 static void synclinkmp_remove_one(struct pci_dev *dev);
484 static struct pci_device_id synclinkmp_pci_tbl[] = {
485 { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
486 { 0, }, /* terminate list */
488 MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
490 MODULE_LICENSE("GPL");
492 static struct pci_driver synclinkmp_pci_driver = {
493 .name = "synclinkmp",
494 .id_table = synclinkmp_pci_tbl,
495 .probe = synclinkmp_init_one,
496 .remove = __devexit_p(synclinkmp_remove_one),
500 static struct tty_driver *serial_driver;
502 /* number of characters left in xmit buffer before we ask for more */
503 #define WAKEUP_CHARS 256
508 static int open(struct tty_struct *tty, struct file * filp);
509 static void close(struct tty_struct *tty, struct file * filp);
510 static void hangup(struct tty_struct *tty);
511 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
513 static int write(struct tty_struct *tty, const unsigned char *buf, int count);
514 static int put_char(struct tty_struct *tty, unsigned char ch);
515 static void send_xchar(struct tty_struct *tty, char ch);
516 static void wait_until_sent(struct tty_struct *tty, int timeout);
517 static int write_room(struct tty_struct *tty);
518 static void flush_chars(struct tty_struct *tty);
519 static void flush_buffer(struct tty_struct *tty);
520 static void tx_hold(struct tty_struct *tty);
521 static void tx_release(struct tty_struct *tty);
523 static int ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
524 static int chars_in_buffer(struct tty_struct *tty);
525 static void throttle(struct tty_struct * tty);
526 static void unthrottle(struct tty_struct * tty);
527 static int set_break(struct tty_struct *tty, int break_state);
529 #if SYNCLINK_GENERIC_HDLC
530 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
531 static void hdlcdev_tx_done(SLMP_INFO *info);
532 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
533 static int hdlcdev_init(SLMP_INFO *info);
534 static void hdlcdev_exit(SLMP_INFO *info);
539 static int get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
540 static int get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
541 static int set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
542 static int get_txidle(SLMP_INFO *info, int __user *idle_mode);
543 static int set_txidle(SLMP_INFO *info, int idle_mode);
544 static int tx_enable(SLMP_INFO *info, int enable);
545 static int tx_abort(SLMP_INFO *info);
546 static int rx_enable(SLMP_INFO *info, int enable);
547 static int modem_input_wait(SLMP_INFO *info,int arg);
548 static int wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
549 static int tiocmget(struct tty_struct *tty);
550 static int tiocmset(struct tty_struct *tty,
551 unsigned int set, unsigned int clear);
552 static int set_break(struct tty_struct *tty, int break_state);
554 static void add_device(SLMP_INFO *info);
555 static void device_init(int adapter_num, struct pci_dev *pdev);
556 static int claim_resources(SLMP_INFO *info);
557 static void release_resources(SLMP_INFO *info);
559 static int startup(SLMP_INFO *info);
560 static int block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
561 static int carrier_raised(struct tty_port *port);
562 static void shutdown(SLMP_INFO *info);
563 static void program_hw(SLMP_INFO *info);
564 static void change_params(SLMP_INFO *info);
566 static bool init_adapter(SLMP_INFO *info);
567 static bool register_test(SLMP_INFO *info);
568 static bool irq_test(SLMP_INFO *info);
569 static bool loopback_test(SLMP_INFO *info);
570 static int adapter_test(SLMP_INFO *info);
571 static bool memory_test(SLMP_INFO *info);
573 static void reset_adapter(SLMP_INFO *info);
574 static void reset_port(SLMP_INFO *info);
575 static void async_mode(SLMP_INFO *info);
576 static void hdlc_mode(SLMP_INFO *info);
578 static void rx_stop(SLMP_INFO *info);
579 static void rx_start(SLMP_INFO *info);
580 static void rx_reset_buffers(SLMP_INFO *info);
581 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
582 static bool rx_get_frame(SLMP_INFO *info);
584 static void tx_start(SLMP_INFO *info);
585 static void tx_stop(SLMP_INFO *info);
586 static void tx_load_fifo(SLMP_INFO *info);
587 static void tx_set_idle(SLMP_INFO *info);
588 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
590 static void get_signals(SLMP_INFO *info);
591 static void set_signals(SLMP_INFO *info);
592 static void enable_loopback(SLMP_INFO *info, int enable);
593 static void set_rate(SLMP_INFO *info, u32 data_rate);
595 static int bh_action(SLMP_INFO *info);
596 static void bh_handler(struct work_struct *work);
597 static void bh_receive(SLMP_INFO *info);
598 static void bh_transmit(SLMP_INFO *info);
599 static void bh_status(SLMP_INFO *info);
600 static void isr_timer(SLMP_INFO *info);
601 static void isr_rxint(SLMP_INFO *info);
602 static void isr_rxrdy(SLMP_INFO *info);
603 static void isr_txint(SLMP_INFO *info);
604 static void isr_txrdy(SLMP_INFO *info);
605 static void isr_rxdmaok(SLMP_INFO *info);
606 static void isr_rxdmaerror(SLMP_INFO *info);
607 static void isr_txdmaok(SLMP_INFO *info);
608 static void isr_txdmaerror(SLMP_INFO *info);
609 static void isr_io_pin(SLMP_INFO *info, u16 status);
611 static int alloc_dma_bufs(SLMP_INFO *info);
612 static void free_dma_bufs(SLMP_INFO *info);
613 static int alloc_buf_list(SLMP_INFO *info);
614 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
615 static int alloc_tmp_rx_buf(SLMP_INFO *info);
616 static void free_tmp_rx_buf(SLMP_INFO *info);
618 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
619 static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
620 static void tx_timeout(unsigned long context);
621 static void status_timeout(unsigned long context);
623 static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
624 static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
625 static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
626 static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
627 static unsigned char read_status_reg(SLMP_INFO * info);
628 static void write_control_reg(SLMP_INFO * info);
631 static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
632 static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
633 static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
635 static u32 misc_ctrl_value = 0x007e4040;
636 static u32 lcr1_brdr_value = 0x00800028;
638 static u32 read_ahead_count = 8;
640 /* DPCR, DMA Priority Control
642 * 07..05 Not used, must be 0
643 * 04 BRC, bus release condition: 0=all transfers complete
644 * 1=release after 1 xfer on all channels
645 * 03 CCC, channel change condition: 0=every cycle
646 * 1=after each channel completes all xfers
647 * 02..00 PR<2..0>, priority 100=round robin
651 static unsigned char dma_priority = 0x04;
653 // Number of bytes that can be written to shared RAM
654 // in a single write operation
655 static u32 sca_pci_load_interval = 64;
658 * 1st function defined in .text section. Calling this function in
659 * init_module() followed by a breakpoint allows a remote debugger
660 * (gdb) to get the .text address for the add-symbol-file command.
661 * This allows remote debugging of dynamically loadable modules.
663 static void* synclinkmp_get_text_ptr(void);
664 static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
666 static inline int sanity_check(SLMP_INFO *info,
667 char *name, const char *routine)
670 static const char *badmagic =
671 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
672 static const char *badinfo =
673 "Warning: null synclinkmp_struct for (%s) in %s\n";
676 printk(badinfo, name, routine);
679 if (info->magic != MGSL_MAGIC) {
680 printk(badmagic, name, routine);
691 * line discipline callback wrappers
693 * The wrappers maintain line discipline references
694 * while calling into the line discipline.
696 * ldisc_receive_buf - pass receive data to line discipline
699 static void ldisc_receive_buf(struct tty_struct *tty,
700 const __u8 *data, char *flags, int count)
702 struct tty_ldisc *ld;
705 ld = tty_ldisc_ref(tty);
707 if (ld->ops->receive_buf)
708 ld->ops->receive_buf(tty, data, flags, count);
715 /* Called when a port is opened. Init and enable port.
717 static int open(struct tty_struct *tty, struct file *filp)
724 if (line >= synclinkmp_device_count) {
725 printk("%s(%d): open with invalid line #%d.\n",
726 __FILE__,__LINE__,line);
730 info = synclinkmp_device_list;
731 while(info && info->line != line)
732 info = info->next_device;
733 if (sanity_check(info, tty->name, "open"))
735 if ( info->init_error ) {
736 printk("%s(%d):%s device is not allocated, init error=%d\n",
737 __FILE__,__LINE__,info->device_name,info->init_error);
741 tty->driver_data = info;
742 info->port.tty = tty;
744 if (debug_level >= DEBUG_LEVEL_INFO)
745 printk("%s(%d):%s open(), old ref count = %d\n",
746 __FILE__,__LINE__,tty->driver->name, info->port.count);
748 /* If port is closing, signal caller to try again */
749 if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
750 if (info->port.flags & ASYNC_CLOSING)
751 interruptible_sleep_on(&info->port.close_wait);
752 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
753 -EAGAIN : -ERESTARTSYS);
757 info->port.tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
759 spin_lock_irqsave(&info->netlock, flags);
760 if (info->netcount) {
762 spin_unlock_irqrestore(&info->netlock, flags);
766 spin_unlock_irqrestore(&info->netlock, flags);
768 if (info->port.count == 1) {
769 /* 1st open on this device, init hardware */
770 retval = startup(info);
775 retval = block_til_ready(tty, filp, info);
777 if (debug_level >= DEBUG_LEVEL_INFO)
778 printk("%s(%d):%s block_til_ready() returned %d\n",
779 __FILE__,__LINE__, info->device_name, retval);
783 if (debug_level >= DEBUG_LEVEL_INFO)
784 printk("%s(%d):%s open() success\n",
785 __FILE__,__LINE__, info->device_name);
791 info->port.tty = NULL; /* tty layer will release tty struct */
799 /* Called when port is closed. Wait for remaining data to be
800 * sent. Disable port and free resources.
802 static void close(struct tty_struct *tty, struct file *filp)
804 SLMP_INFO * info = tty->driver_data;
806 if (sanity_check(info, tty->name, "close"))
809 if (debug_level >= DEBUG_LEVEL_INFO)
810 printk("%s(%d):%s close() entry, count=%d\n",
811 __FILE__,__LINE__, info->device_name, info->port.count);
813 if (tty_port_close_start(&info->port, tty, filp) == 0)
816 mutex_lock(&info->port.mutex);
817 if (info->port.flags & ASYNC_INITIALIZED)
818 wait_until_sent(tty, info->timeout);
821 tty_ldisc_flush(tty);
823 mutex_unlock(&info->port.mutex);
825 tty_port_close_end(&info->port, tty);
826 info->port.tty = NULL;
828 if (debug_level >= DEBUG_LEVEL_INFO)
829 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
830 tty->driver->name, info->port.count);
833 /* Called by tty_hangup() when a hangup is signaled.
834 * This is the same as closing all open descriptors for the port.
836 static void hangup(struct tty_struct *tty)
838 SLMP_INFO *info = tty->driver_data;
841 if (debug_level >= DEBUG_LEVEL_INFO)
842 printk("%s(%d):%s hangup()\n",
843 __FILE__,__LINE__, info->device_name );
845 if (sanity_check(info, tty->name, "hangup"))
848 mutex_lock(&info->port.mutex);
852 spin_lock_irqsave(&info->port.lock, flags);
853 info->port.count = 0;
854 info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
855 info->port.tty = NULL;
856 spin_unlock_irqrestore(&info->port.lock, flags);
857 mutex_unlock(&info->port.mutex);
859 wake_up_interruptible(&info->port.open_wait);
862 /* Set new termios settings
864 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
866 SLMP_INFO *info = tty->driver_data;
869 if (debug_level >= DEBUG_LEVEL_INFO)
870 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
875 /* Handle transition to B0 status */
876 if (old_termios->c_cflag & CBAUD &&
877 !(tty->termios->c_cflag & CBAUD)) {
878 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
879 spin_lock_irqsave(&info->lock,flags);
881 spin_unlock_irqrestore(&info->lock,flags);
884 /* Handle transition away from B0 status */
885 if (!(old_termios->c_cflag & CBAUD) &&
886 tty->termios->c_cflag & CBAUD) {
887 info->serial_signals |= SerialSignal_DTR;
888 if (!(tty->termios->c_cflag & CRTSCTS) ||
889 !test_bit(TTY_THROTTLED, &tty->flags)) {
890 info->serial_signals |= SerialSignal_RTS;
892 spin_lock_irqsave(&info->lock,flags);
894 spin_unlock_irqrestore(&info->lock,flags);
897 /* Handle turning off CRTSCTS */
898 if (old_termios->c_cflag & CRTSCTS &&
899 !(tty->termios->c_cflag & CRTSCTS)) {
905 /* Send a block of data
909 * tty pointer to tty information structure
910 * buf pointer to buffer containing send data
911 * count size of send data in bytes
913 * Return Value: number of characters written
915 static int write(struct tty_struct *tty,
916 const unsigned char *buf, int count)
919 SLMP_INFO *info = tty->driver_data;
922 if (debug_level >= DEBUG_LEVEL_INFO)
923 printk("%s(%d):%s write() count=%d\n",
924 __FILE__,__LINE__,info->device_name,count);
926 if (sanity_check(info, tty->name, "write"))
932 if (info->params.mode == MGSL_MODE_HDLC) {
933 if (count > info->max_frame_size) {
939 if (info->tx_count) {
940 /* send accumulated data from send_char() calls */
941 /* as frame and wait before accepting more data. */
942 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
945 ret = info->tx_count = count;
946 tx_load_dma_buffer(info, buf, count);
951 c = min_t(int, count,
952 min(info->max_frame_size - info->tx_count - 1,
953 info->max_frame_size - info->tx_put));
957 memcpy(info->tx_buf + info->tx_put, buf, c);
959 spin_lock_irqsave(&info->lock,flags);
961 if (info->tx_put >= info->max_frame_size)
962 info->tx_put -= info->max_frame_size;
964 spin_unlock_irqrestore(&info->lock,flags);
971 if (info->params.mode == MGSL_MODE_HDLC) {
973 ret = info->tx_count = 0;
976 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
979 if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
980 spin_lock_irqsave(&info->lock,flags);
981 if (!info->tx_active)
983 spin_unlock_irqrestore(&info->lock,flags);
987 if (debug_level >= DEBUG_LEVEL_INFO)
988 printk( "%s(%d):%s write() returning=%d\n",
989 __FILE__,__LINE__,info->device_name,ret);
993 /* Add a character to the transmit buffer.
995 static int put_char(struct tty_struct *tty, unsigned char ch)
997 SLMP_INFO *info = tty->driver_data;
1001 if ( debug_level >= DEBUG_LEVEL_INFO ) {
1002 printk( "%s(%d):%s put_char(%d)\n",
1003 __FILE__,__LINE__,info->device_name,ch);
1006 if (sanity_check(info, tty->name, "put_char"))
1012 spin_lock_irqsave(&info->lock,flags);
1014 if ( (info->params.mode != MGSL_MODE_HDLC) ||
1015 !info->tx_active ) {
1017 if (info->tx_count < info->max_frame_size - 1) {
1018 info->tx_buf[info->tx_put++] = ch;
1019 if (info->tx_put >= info->max_frame_size)
1020 info->tx_put -= info->max_frame_size;
1026 spin_unlock_irqrestore(&info->lock,flags);
1030 /* Send a high-priority XON/XOFF character
1032 static void send_xchar(struct tty_struct *tty, char ch)
1034 SLMP_INFO *info = tty->driver_data;
1035 unsigned long flags;
1037 if (debug_level >= DEBUG_LEVEL_INFO)
1038 printk("%s(%d):%s send_xchar(%d)\n",
1039 __FILE__,__LINE__, info->device_name, ch );
1041 if (sanity_check(info, tty->name, "send_xchar"))
1046 /* Make sure transmit interrupts are on */
1047 spin_lock_irqsave(&info->lock,flags);
1048 if (!info->tx_enabled)
1050 spin_unlock_irqrestore(&info->lock,flags);
1054 /* Wait until the transmitter is empty.
1056 static void wait_until_sent(struct tty_struct *tty, int timeout)
1058 SLMP_INFO * info = tty->driver_data;
1059 unsigned long orig_jiffies, char_time;
1064 if (debug_level >= DEBUG_LEVEL_INFO)
1065 printk("%s(%d):%s wait_until_sent() entry\n",
1066 __FILE__,__LINE__, info->device_name );
1068 if (sanity_check(info, tty->name, "wait_until_sent"))
1071 if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
1074 orig_jiffies = jiffies;
1076 /* Set check interval to 1/5 of estimated time to
1077 * send a character, and make it at least 1. The check
1078 * interval should also be less than the timeout.
1079 * Note: use tight timings here to satisfy the NIST-PCTS.
1082 if ( info->params.data_rate ) {
1083 char_time = info->timeout/(32 * 5);
1090 char_time = min_t(unsigned long, char_time, timeout);
1092 if ( info->params.mode == MGSL_MODE_HDLC ) {
1093 while (info->tx_active) {
1094 msleep_interruptible(jiffies_to_msecs(char_time));
1095 if (signal_pending(current))
1097 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1102 * TODO: determine if there is something similar to USC16C32
1103 * TXSTATUS_ALL_SENT status
1105 while ( info->tx_active && info->tx_enabled) {
1106 msleep_interruptible(jiffies_to_msecs(char_time));
1107 if (signal_pending(current))
1109 if (timeout && time_after(jiffies, orig_jiffies + timeout))
1115 if (debug_level >= DEBUG_LEVEL_INFO)
1116 printk("%s(%d):%s wait_until_sent() exit\n",
1117 __FILE__,__LINE__, info->device_name );
1120 /* Return the count of free bytes in transmit buffer
1122 static int write_room(struct tty_struct *tty)
1124 SLMP_INFO *info = tty->driver_data;
1127 if (sanity_check(info, tty->name, "write_room"))
1130 if (info->params.mode == MGSL_MODE_HDLC) {
1131 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1133 ret = info->max_frame_size - info->tx_count - 1;
1138 if (debug_level >= DEBUG_LEVEL_INFO)
1139 printk("%s(%d):%s write_room()=%d\n",
1140 __FILE__, __LINE__, info->device_name, ret);
1145 /* enable transmitter and send remaining buffered characters
1147 static void flush_chars(struct tty_struct *tty)
1149 SLMP_INFO *info = tty->driver_data;
1150 unsigned long flags;
1152 if ( debug_level >= DEBUG_LEVEL_INFO )
1153 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1154 __FILE__,__LINE__,info->device_name,info->tx_count);
1156 if (sanity_check(info, tty->name, "flush_chars"))
1159 if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1163 if ( debug_level >= DEBUG_LEVEL_INFO )
1164 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1165 __FILE__,__LINE__,info->device_name );
1167 spin_lock_irqsave(&info->lock,flags);
1169 if (!info->tx_active) {
1170 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1172 /* operating in synchronous (frame oriented) mode */
1173 /* copy data from circular tx_buf to */
1174 /* transmit DMA buffer. */
1175 tx_load_dma_buffer(info,
1176 info->tx_buf,info->tx_count);
1181 spin_unlock_irqrestore(&info->lock,flags);
1184 /* Discard all data in the send buffer
1186 static void flush_buffer(struct tty_struct *tty)
1188 SLMP_INFO *info = tty->driver_data;
1189 unsigned long flags;
1191 if (debug_level >= DEBUG_LEVEL_INFO)
1192 printk("%s(%d):%s flush_buffer() entry\n",
1193 __FILE__,__LINE__, info->device_name );
1195 if (sanity_check(info, tty->name, "flush_buffer"))
1198 spin_lock_irqsave(&info->lock,flags);
1199 info->tx_count = info->tx_put = info->tx_get = 0;
1200 del_timer(&info->tx_timer);
1201 spin_unlock_irqrestore(&info->lock,flags);
1206 /* throttle (stop) transmitter
1208 static void tx_hold(struct tty_struct *tty)
1210 SLMP_INFO *info = tty->driver_data;
1211 unsigned long flags;
1213 if (sanity_check(info, tty->name, "tx_hold"))
1216 if ( debug_level >= DEBUG_LEVEL_INFO )
1217 printk("%s(%d):%s tx_hold()\n",
1218 __FILE__,__LINE__,info->device_name);
1220 spin_lock_irqsave(&info->lock,flags);
1221 if (info->tx_enabled)
1223 spin_unlock_irqrestore(&info->lock,flags);
1226 /* release (start) transmitter
1228 static void tx_release(struct tty_struct *tty)
1230 SLMP_INFO *info = tty->driver_data;
1231 unsigned long flags;
1233 if (sanity_check(info, tty->name, "tx_release"))
1236 if ( debug_level >= DEBUG_LEVEL_INFO )
1237 printk("%s(%d):%s tx_release()\n",
1238 __FILE__,__LINE__,info->device_name);
1240 spin_lock_irqsave(&info->lock,flags);
1241 if (!info->tx_enabled)
1243 spin_unlock_irqrestore(&info->lock,flags);
1246 /* Service an IOCTL request
1250 * tty pointer to tty instance data
1251 * cmd IOCTL command code
1252 * arg command argument/context
1254 * Return Value: 0 if success, otherwise error code
1256 static int ioctl(struct tty_struct *tty,
1257 unsigned int cmd, unsigned long arg)
1259 SLMP_INFO *info = tty->driver_data;
1260 void __user *argp = (void __user *)arg;
1262 if (debug_level >= DEBUG_LEVEL_INFO)
1263 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1264 info->device_name, cmd );
1266 if (sanity_check(info, tty->name, "ioctl"))
1269 if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1270 (cmd != TIOCMIWAIT)) {
1271 if (tty->flags & (1 << TTY_IO_ERROR))
1276 case MGSL_IOCGPARAMS:
1277 return get_params(info, argp);
1278 case MGSL_IOCSPARAMS:
1279 return set_params(info, argp);
1280 case MGSL_IOCGTXIDLE:
1281 return get_txidle(info, argp);
1282 case MGSL_IOCSTXIDLE:
1283 return set_txidle(info, (int)arg);
1284 case MGSL_IOCTXENABLE:
1285 return tx_enable(info, (int)arg);
1286 case MGSL_IOCRXENABLE:
1287 return rx_enable(info, (int)arg);
1288 case MGSL_IOCTXABORT:
1289 return tx_abort(info);
1290 case MGSL_IOCGSTATS:
1291 return get_stats(info, argp);
1292 case MGSL_IOCWAITEVENT:
1293 return wait_mgsl_event(info, argp);
1294 case MGSL_IOCLOOPTXDONE:
1295 return 0; // TODO: Not supported, need to document
1296 /* Wait for modem input (DCD,RI,DSR,CTS) change
1297 * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1300 return modem_input_wait(info,(int)arg);
1303 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1304 * Return: write counters to the user passed counter struct
1305 * NB: both 1->0 and 0->1 transitions are counted except for
1306 * RI where only 0->1 is counted.
1309 return -ENOIOCTLCMD;
1314 static int get_icount(struct tty_struct *tty,
1315 struct serial_icounter_struct *icount)
1317 SLMP_INFO *info = tty->driver_data;
1318 struct mgsl_icount cnow; /* kernel counter temps */
1319 unsigned long flags;
1321 spin_lock_irqsave(&info->lock,flags);
1322 cnow = info->icount;
1323 spin_unlock_irqrestore(&info->lock,flags);
1325 icount->cts = cnow.cts;
1326 icount->dsr = cnow.dsr;
1327 icount->rng = cnow.rng;
1328 icount->dcd = cnow.dcd;
1329 icount->rx = cnow.rx;
1330 icount->tx = cnow.tx;
1331 icount->frame = cnow.frame;
1332 icount->overrun = cnow.overrun;
1333 icount->parity = cnow.parity;
1334 icount->brk = cnow.brk;
1335 icount->buf_overrun = cnow.buf_overrun;
1341 * /proc fs routines....
1344 static inline void line_info(struct seq_file *m, SLMP_INFO *info)
1347 unsigned long flags;
1349 seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1350 "\tIRQ=%d MaxFrameSize=%u\n",
1352 info->phys_sca_base,
1353 info->phys_memory_base,
1354 info->phys_statctrl_base,
1355 info->phys_lcr_base,
1357 info->max_frame_size );
1359 /* output current serial signal states */
1360 spin_lock_irqsave(&info->lock,flags);
1362 spin_unlock_irqrestore(&info->lock,flags);
1366 if (info->serial_signals & SerialSignal_RTS)
1367 strcat(stat_buf, "|RTS");
1368 if (info->serial_signals & SerialSignal_CTS)
1369 strcat(stat_buf, "|CTS");
1370 if (info->serial_signals & SerialSignal_DTR)
1371 strcat(stat_buf, "|DTR");
1372 if (info->serial_signals & SerialSignal_DSR)
1373 strcat(stat_buf, "|DSR");
1374 if (info->serial_signals & SerialSignal_DCD)
1375 strcat(stat_buf, "|CD");
1376 if (info->serial_signals & SerialSignal_RI)
1377 strcat(stat_buf, "|RI");
1379 if (info->params.mode == MGSL_MODE_HDLC) {
1380 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1381 info->icount.txok, info->icount.rxok);
1382 if (info->icount.txunder)
1383 seq_printf(m, " txunder:%d", info->icount.txunder);
1384 if (info->icount.txabort)
1385 seq_printf(m, " txabort:%d", info->icount.txabort);
1386 if (info->icount.rxshort)
1387 seq_printf(m, " rxshort:%d", info->icount.rxshort);
1388 if (info->icount.rxlong)
1389 seq_printf(m, " rxlong:%d", info->icount.rxlong);
1390 if (info->icount.rxover)
1391 seq_printf(m, " rxover:%d", info->icount.rxover);
1392 if (info->icount.rxcrc)
1393 seq_printf(m, " rxlong:%d", info->icount.rxcrc);
1395 seq_printf(m, "\tASYNC tx:%d rx:%d",
1396 info->icount.tx, info->icount.rx);
1397 if (info->icount.frame)
1398 seq_printf(m, " fe:%d", info->icount.frame);
1399 if (info->icount.parity)
1400 seq_printf(m, " pe:%d", info->icount.parity);
1401 if (info->icount.brk)
1402 seq_printf(m, " brk:%d", info->icount.brk);
1403 if (info->icount.overrun)
1404 seq_printf(m, " oe:%d", info->icount.overrun);
1407 /* Append serial signal status to end */
1408 seq_printf(m, " %s\n", stat_buf+1);
1410 seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1411 info->tx_active,info->bh_requested,info->bh_running,
1415 /* Called to print information about devices
1417 static int synclinkmp_proc_show(struct seq_file *m, void *v)
1421 seq_printf(m, "synclinkmp driver:%s\n", driver_version);
1423 info = synclinkmp_device_list;
1426 info = info->next_device;
1431 static int synclinkmp_proc_open(struct inode *inode, struct file *file)
1433 return single_open(file, synclinkmp_proc_show, NULL);
1436 static const struct file_operations synclinkmp_proc_fops = {
1437 .owner = THIS_MODULE,
1438 .open = synclinkmp_proc_open,
1440 .llseek = seq_lseek,
1441 .release = single_release,
1444 /* Return the count of bytes in transmit buffer
1446 static int chars_in_buffer(struct tty_struct *tty)
1448 SLMP_INFO *info = tty->driver_data;
1450 if (sanity_check(info, tty->name, "chars_in_buffer"))
1453 if (debug_level >= DEBUG_LEVEL_INFO)
1454 printk("%s(%d):%s chars_in_buffer()=%d\n",
1455 __FILE__, __LINE__, info->device_name, info->tx_count);
1457 return info->tx_count;
1460 /* Signal remote device to throttle send data (our receive data)
1462 static void throttle(struct tty_struct * tty)
1464 SLMP_INFO *info = tty->driver_data;
1465 unsigned long flags;
1467 if (debug_level >= DEBUG_LEVEL_INFO)
1468 printk("%s(%d):%s throttle() entry\n",
1469 __FILE__,__LINE__, info->device_name );
1471 if (sanity_check(info, tty->name, "throttle"))
1475 send_xchar(tty, STOP_CHAR(tty));
1477 if (tty->termios->c_cflag & CRTSCTS) {
1478 spin_lock_irqsave(&info->lock,flags);
1479 info->serial_signals &= ~SerialSignal_RTS;
1481 spin_unlock_irqrestore(&info->lock,flags);
1485 /* Signal remote device to stop throttling send data (our receive data)
1487 static void unthrottle(struct tty_struct * tty)
1489 SLMP_INFO *info = tty->driver_data;
1490 unsigned long flags;
1492 if (debug_level >= DEBUG_LEVEL_INFO)
1493 printk("%s(%d):%s unthrottle() entry\n",
1494 __FILE__,__LINE__, info->device_name );
1496 if (sanity_check(info, tty->name, "unthrottle"))
1503 send_xchar(tty, START_CHAR(tty));
1506 if (tty->termios->c_cflag & CRTSCTS) {
1507 spin_lock_irqsave(&info->lock,flags);
1508 info->serial_signals |= SerialSignal_RTS;
1510 spin_unlock_irqrestore(&info->lock,flags);
1514 /* set or clear transmit break condition
1515 * break_state -1=set break condition, 0=clear
1517 static int set_break(struct tty_struct *tty, int break_state)
1519 unsigned char RegValue;
1520 SLMP_INFO * info = tty->driver_data;
1521 unsigned long flags;
1523 if (debug_level >= DEBUG_LEVEL_INFO)
1524 printk("%s(%d):%s set_break(%d)\n",
1525 __FILE__,__LINE__, info->device_name, break_state);
1527 if (sanity_check(info, tty->name, "set_break"))
1530 spin_lock_irqsave(&info->lock,flags);
1531 RegValue = read_reg(info, CTL);
1532 if (break_state == -1)
1536 write_reg(info, CTL, RegValue);
1537 spin_unlock_irqrestore(&info->lock,flags);
1541 #if SYNCLINK_GENERIC_HDLC
1544 * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1545 * set encoding and frame check sequence (FCS) options
1547 * dev pointer to network device structure
1548 * encoding serial encoding setting
1549 * parity FCS setting
1551 * returns 0 if success, otherwise error code
1553 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1554 unsigned short parity)
1556 SLMP_INFO *info = dev_to_port(dev);
1557 unsigned char new_encoding;
1558 unsigned short new_crctype;
1560 /* return error if TTY interface open */
1561 if (info->port.count)
1566 case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
1567 case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1568 case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1569 case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1570 case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1571 default: return -EINVAL;
1576 case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
1577 case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1578 case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1579 default: return -EINVAL;
1582 info->params.encoding = new_encoding;
1583 info->params.crc_type = new_crctype;
1585 /* if network interface up, reprogram hardware */
1593 * called by generic HDLC layer to send frame
1595 * skb socket buffer containing HDLC frame
1596 * dev pointer to network device structure
1598 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1599 struct net_device *dev)
1601 SLMP_INFO *info = dev_to_port(dev);
1602 unsigned long flags;
1604 if (debug_level >= DEBUG_LEVEL_INFO)
1605 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1607 /* stop sending until this frame completes */
1608 netif_stop_queue(dev);
1610 /* copy data to device buffers */
1611 info->tx_count = skb->len;
1612 tx_load_dma_buffer(info, skb->data, skb->len);
1614 /* update network statistics */
1615 dev->stats.tx_packets++;
1616 dev->stats.tx_bytes += skb->len;
1618 /* done with socket buffer, so free it */
1621 /* save start time for transmit timeout detection */
1622 dev->trans_start = jiffies;
1624 /* start hardware transmitter if necessary */
1625 spin_lock_irqsave(&info->lock,flags);
1626 if (!info->tx_active)
1628 spin_unlock_irqrestore(&info->lock,flags);
1630 return NETDEV_TX_OK;
1634 * called by network layer when interface enabled
1635 * claim resources and initialize hardware
1637 * dev pointer to network device structure
1639 * returns 0 if success, otherwise error code
1641 static int hdlcdev_open(struct net_device *dev)
1643 SLMP_INFO *info = dev_to_port(dev);
1645 unsigned long flags;
1647 if (debug_level >= DEBUG_LEVEL_INFO)
1648 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1650 /* generic HDLC layer open processing */
1651 if ((rc = hdlc_open(dev)))
1654 /* arbitrate between network and tty opens */
1655 spin_lock_irqsave(&info->netlock, flags);
1656 if (info->port.count != 0 || info->netcount != 0) {
1657 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1658 spin_unlock_irqrestore(&info->netlock, flags);
1662 spin_unlock_irqrestore(&info->netlock, flags);
1664 /* claim resources and init adapter */
1665 if ((rc = startup(info)) != 0) {
1666 spin_lock_irqsave(&info->netlock, flags);
1668 spin_unlock_irqrestore(&info->netlock, flags);
1672 /* assert DTR and RTS, apply hardware settings */
1673 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
1676 /* enable network layer transmit */
1677 dev->trans_start = jiffies;
1678 netif_start_queue(dev);
1680 /* inform generic HDLC layer of current DCD status */
1681 spin_lock_irqsave(&info->lock, flags);
1683 spin_unlock_irqrestore(&info->lock, flags);
1684 if (info->serial_signals & SerialSignal_DCD)
1685 netif_carrier_on(dev);
1687 netif_carrier_off(dev);
1692 * called by network layer when interface is disabled
1693 * shutdown hardware and release resources
1695 * dev pointer to network device structure
1697 * returns 0 if success, otherwise error code
1699 static int hdlcdev_close(struct net_device *dev)
1701 SLMP_INFO *info = dev_to_port(dev);
1702 unsigned long flags;
1704 if (debug_level >= DEBUG_LEVEL_INFO)
1705 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1707 netif_stop_queue(dev);
1709 /* shutdown adapter and release resources */
1714 spin_lock_irqsave(&info->netlock, flags);
1716 spin_unlock_irqrestore(&info->netlock, flags);
1722 * called by network layer to process IOCTL call to network device
1724 * dev pointer to network device structure
1725 * ifr pointer to network interface request structure
1726 * cmd IOCTL command code
1728 * returns 0 if success, otherwise error code
1730 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1732 const size_t size = sizeof(sync_serial_settings);
1733 sync_serial_settings new_line;
1734 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1735 SLMP_INFO *info = dev_to_port(dev);
1738 if (debug_level >= DEBUG_LEVEL_INFO)
1739 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1741 /* return error if TTY interface open */
1742 if (info->port.count)
1745 if (cmd != SIOCWANDEV)
1746 return hdlc_ioctl(dev, ifr, cmd);
1748 switch(ifr->ifr_settings.type) {
1749 case IF_GET_IFACE: /* return current sync_serial_settings */
1751 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1752 if (ifr->ifr_settings.size < size) {
1753 ifr->ifr_settings.size = size; /* data size wanted */
1757 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1758 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1759 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1760 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1763 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1764 case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
1765 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
1766 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1767 default: new_line.clock_type = CLOCK_DEFAULT;
1770 new_line.clock_rate = info->params.clock_speed;
1771 new_line.loopback = info->params.loopback ? 1:0;
1773 if (copy_to_user(line, &new_line, size))
1777 case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1779 if(!capable(CAP_NET_ADMIN))
1781 if (copy_from_user(&new_line, line, size))
1784 switch (new_line.clock_type)
1786 case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1787 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1788 case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
1789 case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
1790 case CLOCK_DEFAULT: flags = info->params.flags &
1791 (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1792 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1793 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1794 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
1795 default: return -EINVAL;
1798 if (new_line.loopback != 0 && new_line.loopback != 1)
1801 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1802 HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
1803 HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1804 HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
1805 info->params.flags |= flags;
1807 info->params.loopback = new_line.loopback;
1809 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1810 info->params.clock_speed = new_line.clock_rate;
1812 info->params.clock_speed = 0;
1814 /* if network interface up, reprogram hardware */
1820 return hdlc_ioctl(dev, ifr, cmd);
1825 * called by network layer when transmit timeout is detected
1827 * dev pointer to network device structure
1829 static void hdlcdev_tx_timeout(struct net_device *dev)
1831 SLMP_INFO *info = dev_to_port(dev);
1832 unsigned long flags;
1834 if (debug_level >= DEBUG_LEVEL_INFO)
1835 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1837 dev->stats.tx_errors++;
1838 dev->stats.tx_aborted_errors++;
1840 spin_lock_irqsave(&info->lock,flags);
1842 spin_unlock_irqrestore(&info->lock,flags);
1844 netif_wake_queue(dev);
1848 * called by device driver when transmit completes
1849 * reenable network layer transmit if stopped
1851 * info pointer to device instance information
1853 static void hdlcdev_tx_done(SLMP_INFO *info)
1855 if (netif_queue_stopped(info->netdev))
1856 netif_wake_queue(info->netdev);
1860 * called by device driver when frame received
1861 * pass frame to network layer
1863 * info pointer to device instance information
1864 * buf pointer to buffer contianing frame data
1865 * size count of data bytes in buf
1867 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1869 struct sk_buff *skb = dev_alloc_skb(size);
1870 struct net_device *dev = info->netdev;
1872 if (debug_level >= DEBUG_LEVEL_INFO)
1873 printk("hdlcdev_rx(%s)\n",dev->name);
1876 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
1878 dev->stats.rx_dropped++;
1882 memcpy(skb_put(skb, size), buf, size);
1884 skb->protocol = hdlc_type_trans(skb, dev);
1886 dev->stats.rx_packets++;
1887 dev->stats.rx_bytes += size;
1892 static const struct net_device_ops hdlcdev_ops = {
1893 .ndo_open = hdlcdev_open,
1894 .ndo_stop = hdlcdev_close,
1895 .ndo_change_mtu = hdlc_change_mtu,
1896 .ndo_start_xmit = hdlc_start_xmit,
1897 .ndo_do_ioctl = hdlcdev_ioctl,
1898 .ndo_tx_timeout = hdlcdev_tx_timeout,
1902 * called by device driver when adding device instance
1903 * do generic HDLC initialization
1905 * info pointer to device instance information
1907 * returns 0 if success, otherwise error code
1909 static int hdlcdev_init(SLMP_INFO *info)
1912 struct net_device *dev;
1915 /* allocate and initialize network and HDLC layer objects */
1917 if (!(dev = alloc_hdlcdev(info))) {
1918 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1922 /* for network layer reporting purposes only */
1923 dev->mem_start = info->phys_sca_base;
1924 dev->mem_end = info->phys_sca_base + SCA_BASE_SIZE - 1;
1925 dev->irq = info->irq_level;
1927 /* network layer callbacks and settings */
1928 dev->netdev_ops = &hdlcdev_ops;
1929 dev->watchdog_timeo = 10 * HZ;
1930 dev->tx_queue_len = 50;
1932 /* generic HDLC layer callbacks and settings */
1933 hdlc = dev_to_hdlc(dev);
1934 hdlc->attach = hdlcdev_attach;
1935 hdlc->xmit = hdlcdev_xmit;
1937 /* register objects with HDLC layer */
1938 if ((rc = register_hdlc_device(dev))) {
1939 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1949 * called by device driver when removing device instance
1950 * do generic HDLC cleanup
1952 * info pointer to device instance information
1954 static void hdlcdev_exit(SLMP_INFO *info)
1956 unregister_hdlc_device(info->netdev);
1957 free_netdev(info->netdev);
1958 info->netdev = NULL;
1961 #endif /* CONFIG_HDLC */
1964 /* Return next bottom half action to perform.
1965 * Return Value: BH action code or 0 if nothing to do.
1967 static int bh_action(SLMP_INFO *info)
1969 unsigned long flags;
1972 spin_lock_irqsave(&info->lock,flags);
1974 if (info->pending_bh & BH_RECEIVE) {
1975 info->pending_bh &= ~BH_RECEIVE;
1977 } else if (info->pending_bh & BH_TRANSMIT) {
1978 info->pending_bh &= ~BH_TRANSMIT;
1980 } else if (info->pending_bh & BH_STATUS) {
1981 info->pending_bh &= ~BH_STATUS;
1986 /* Mark BH routine as complete */
1987 info->bh_running = false;
1988 info->bh_requested = false;
1991 spin_unlock_irqrestore(&info->lock,flags);
1996 /* Perform bottom half processing of work items queued by ISR.
1998 static void bh_handler(struct work_struct *work)
2000 SLMP_INFO *info = container_of(work, SLMP_INFO, task);
2006 if ( debug_level >= DEBUG_LEVEL_BH )
2007 printk( "%s(%d):%s bh_handler() entry\n",
2008 __FILE__,__LINE__,info->device_name);
2010 info->bh_running = true;
2012 while((action = bh_action(info)) != 0) {
2014 /* Process work item */
2015 if ( debug_level >= DEBUG_LEVEL_BH )
2016 printk( "%s(%d):%s bh_handler() work item action=%d\n",
2017 __FILE__,__LINE__,info->device_name, action);
2031 /* unknown work item ID */
2032 printk("%s(%d):%s Unknown work item ID=%08X!\n",
2033 __FILE__,__LINE__,info->device_name,action);
2038 if ( debug_level >= DEBUG_LEVEL_BH )
2039 printk( "%s(%d):%s bh_handler() exit\n",
2040 __FILE__,__LINE__,info->device_name);
2043 static void bh_receive(SLMP_INFO *info)
2045 if ( debug_level >= DEBUG_LEVEL_BH )
2046 printk( "%s(%d):%s bh_receive()\n",
2047 __FILE__,__LINE__,info->device_name);
2049 while( rx_get_frame(info) );
2052 static void bh_transmit(SLMP_INFO *info)
2054 struct tty_struct *tty = info->port.tty;
2056 if ( debug_level >= DEBUG_LEVEL_BH )
2057 printk( "%s(%d):%s bh_transmit() entry\n",
2058 __FILE__,__LINE__,info->device_name);
2064 static void bh_status(SLMP_INFO *info)
2066 if ( debug_level >= DEBUG_LEVEL_BH )
2067 printk( "%s(%d):%s bh_status() entry\n",
2068 __FILE__,__LINE__,info->device_name);
2070 info->ri_chkcount = 0;
2071 info->dsr_chkcount = 0;
2072 info->dcd_chkcount = 0;
2073 info->cts_chkcount = 0;
2076 static void isr_timer(SLMP_INFO * info)
2078 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2080 /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2081 write_reg(info, IER2, 0);
2083 /* TMCS, Timer Control/Status Register
2085 * 07 CMF, Compare match flag (read only) 1=match
2086 * 06 ECMI, CMF Interrupt Enable: 0=disabled
2087 * 05 Reserved, must be 0
2088 * 04 TME, Timer Enable
2089 * 03..00 Reserved, must be 0
2093 write_reg(info, (unsigned char)(timer + TMCS), 0);
2095 info->irq_occurred = true;
2097 if ( debug_level >= DEBUG_LEVEL_ISR )
2098 printk("%s(%d):%s isr_timer()\n",
2099 __FILE__,__LINE__,info->device_name);
2102 static void isr_rxint(SLMP_INFO * info)
2104 struct tty_struct *tty = info->port.tty;
2105 struct mgsl_icount *icount = &info->icount;
2106 unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2107 unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2109 /* clear status bits */
2111 write_reg(info, SR1, status);
2114 write_reg(info, SR2, status2);
2116 if ( debug_level >= DEBUG_LEVEL_ISR )
2117 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2118 __FILE__,__LINE__,info->device_name,status,status2);
2120 if (info->params.mode == MGSL_MODE_ASYNC) {
2121 if (status & BRKD) {
2124 /* process break detection if tty control
2125 * is not set to ignore it
2128 if (!(status & info->ignore_status_mask1)) {
2129 if (info->read_status_mask1 & BRKD) {
2130 tty_insert_flip_char(tty, 0, TTY_BREAK);
2131 if (info->port.flags & ASYNC_SAK)
2139 if (status & (FLGD|IDLD)) {
2141 info->icount.exithunt++;
2142 else if (status & IDLD)
2143 info->icount.rxidle++;
2144 wake_up_interruptible(&info->event_wait_q);
2148 if (status & CDCD) {
2149 /* simulate a common modem status change interrupt
2152 get_signals( info );
2154 MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2159 * handle async rx data interrupts
2161 static void isr_rxrdy(SLMP_INFO * info)
2164 unsigned char DataByte;
2165 struct tty_struct *tty = info->port.tty;
2166 struct mgsl_icount *icount = &info->icount;
2168 if ( debug_level >= DEBUG_LEVEL_ISR )
2169 printk("%s(%d):%s isr_rxrdy\n",
2170 __FILE__,__LINE__,info->device_name);
2172 while((status = read_reg(info,CST0)) & BIT0)
2176 DataByte = read_reg(info,TRB);
2180 if ( status & (PE + FRME + OVRN) ) {
2181 printk("%s(%d):%s rxerr=%04X\n",
2182 __FILE__,__LINE__,info->device_name,status);
2184 /* update error statistics */
2187 else if (status & FRME)
2189 else if (status & OVRN)
2192 /* discard char if tty control flags say so */
2193 if (status & info->ignore_status_mask2)
2196 status &= info->read_status_mask2;
2201 else if (status & FRME)
2203 if (status & OVRN) {
2204 /* Overrun is special, since it's
2205 * reported immediately, and doesn't
2206 * affect the current character
2211 } /* end of if (error) */
2214 tty_insert_flip_char(tty, DataByte, flag);
2216 tty_insert_flip_char(tty, 0, TTY_OVERRUN);
2220 if ( debug_level >= DEBUG_LEVEL_ISR ) {
2221 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2222 __FILE__,__LINE__,info->device_name,
2223 icount->rx,icount->brk,icount->parity,
2224 icount->frame,icount->overrun);
2228 tty_flip_buffer_push(tty);
2231 static void isr_txeom(SLMP_INFO * info, unsigned char status)
2233 if ( debug_level >= DEBUG_LEVEL_ISR )
2234 printk("%s(%d):%s isr_txeom status=%02x\n",
2235 __FILE__,__LINE__,info->device_name,status);
2237 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2238 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2239 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2241 if (status & UDRN) {
2242 write_reg(info, CMD, TXRESET);
2243 write_reg(info, CMD, TXENABLE);
2245 write_reg(info, CMD, TXBUFCLR);
2247 /* disable and clear tx interrupts */
2248 info->ie0_value &= ~TXRDYE;
2249 info->ie1_value &= ~(IDLE + UDRN);
2250 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2251 write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2253 if ( info->tx_active ) {
2254 if (info->params.mode != MGSL_MODE_ASYNC) {
2256 info->icount.txunder++;
2257 else if (status & IDLE)
2258 info->icount.txok++;
2261 info->tx_active = false;
2262 info->tx_count = info->tx_put = info->tx_get = 0;
2264 del_timer(&info->tx_timer);
2266 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2267 info->serial_signals &= ~SerialSignal_RTS;
2268 info->drop_rts_on_tx_done = false;
2272 #if SYNCLINK_GENERIC_HDLC
2274 hdlcdev_tx_done(info);
2278 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2282 info->pending_bh |= BH_TRANSMIT;
2289 * handle tx status interrupts
2291 static void isr_txint(SLMP_INFO * info)
2293 unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2295 /* clear status bits */
2296 write_reg(info, SR1, status);
2298 if ( debug_level >= DEBUG_LEVEL_ISR )
2299 printk("%s(%d):%s isr_txint status=%02x\n",
2300 __FILE__,__LINE__,info->device_name,status);
2302 if (status & (UDRN + IDLE))
2303 isr_txeom(info, status);
2305 if (status & CCTS) {
2306 /* simulate a common modem status change interrupt
2309 get_signals( info );
2311 MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2317 * handle async tx data interrupts
2319 static void isr_txrdy(SLMP_INFO * info)
2321 if ( debug_level >= DEBUG_LEVEL_ISR )
2322 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2323 __FILE__,__LINE__,info->device_name,info->tx_count);
2325 if (info->params.mode != MGSL_MODE_ASYNC) {
2326 /* disable TXRDY IRQ, enable IDLE IRQ */
2327 info->ie0_value &= ~TXRDYE;
2328 info->ie1_value |= IDLE;
2329 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2333 if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2338 if ( info->tx_count )
2339 tx_load_fifo( info );
2341 info->tx_active = false;
2342 info->ie0_value &= ~TXRDYE;
2343 write_reg(info, IE0, info->ie0_value);
2346 if (info->tx_count < WAKEUP_CHARS)
2347 info->pending_bh |= BH_TRANSMIT;
2350 static void isr_rxdmaok(SLMP_INFO * info)
2352 /* BIT7 = EOT (end of transfer)
2353 * BIT6 = EOM (end of message/frame)
2355 unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2357 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2358 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2360 if ( debug_level >= DEBUG_LEVEL_ISR )
2361 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2362 __FILE__,__LINE__,info->device_name,status);
2364 info->pending_bh |= BH_RECEIVE;
2367 static void isr_rxdmaerror(SLMP_INFO * info)
2369 /* BIT5 = BOF (buffer overflow)
2370 * BIT4 = COF (counter overflow)
2372 unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2374 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2375 write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2377 if ( debug_level >= DEBUG_LEVEL_ISR )
2378 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2379 __FILE__,__LINE__,info->device_name,status);
2381 info->rx_overflow = true;
2382 info->pending_bh |= BH_RECEIVE;
2385 static void isr_txdmaok(SLMP_INFO * info)
2387 unsigned char status_reg1 = read_reg(info, SR1);
2389 write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2390 write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2391 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2393 if ( debug_level >= DEBUG_LEVEL_ISR )
2394 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2395 __FILE__,__LINE__,info->device_name,status_reg1);
2397 /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2398 write_reg16(info, TRC0, 0);
2399 info->ie0_value |= TXRDYE;
2400 write_reg(info, IE0, info->ie0_value);
2403 static void isr_txdmaerror(SLMP_INFO * info)
2405 /* BIT5 = BOF (buffer overflow)
2406 * BIT4 = COF (counter overflow)
2408 unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2410 /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2411 write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2413 if ( debug_level >= DEBUG_LEVEL_ISR )
2414 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2415 __FILE__,__LINE__,info->device_name,status);
2418 /* handle input serial signal changes
2420 static void isr_io_pin( SLMP_INFO *info, u16 status )
2422 struct mgsl_icount *icount;
2424 if ( debug_level >= DEBUG_LEVEL_ISR )
2425 printk("%s(%d):isr_io_pin status=%04X\n",
2426 __FILE__,__LINE__,status);
2428 if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2429 MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2430 icount = &info->icount;
2431 /* update input line counters */
2432 if (status & MISCSTATUS_RI_LATCHED) {
2434 if ( status & SerialSignal_RI )
2435 info->input_signal_events.ri_up++;
2437 info->input_signal_events.ri_down++;
2439 if (status & MISCSTATUS_DSR_LATCHED) {
2441 if ( status & SerialSignal_DSR )
2442 info->input_signal_events.dsr_up++;
2444 info->input_signal_events.dsr_down++;
2446 if (status & MISCSTATUS_DCD_LATCHED) {
2447 if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2448 info->ie1_value &= ~CDCD;
2449 write_reg(info, IE1, info->ie1_value);
2452 if (status & SerialSignal_DCD) {
2453 info->input_signal_events.dcd_up++;
2455 info->input_signal_events.dcd_down++;
2456 #if SYNCLINK_GENERIC_HDLC
2457 if (info->netcount) {
2458 if (status & SerialSignal_DCD)
2459 netif_carrier_on(info->netdev);
2461 netif_carrier_off(info->netdev);
2465 if (status & MISCSTATUS_CTS_LATCHED)
2467 if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2468 info->ie1_value &= ~CCTS;
2469 write_reg(info, IE1, info->ie1_value);
2472 if ( status & SerialSignal_CTS )
2473 info->input_signal_events.cts_up++;
2475 info->input_signal_events.cts_down++;
2477 wake_up_interruptible(&info->status_event_wait_q);
2478 wake_up_interruptible(&info->event_wait_q);
2480 if ( (info->port.flags & ASYNC_CHECK_CD) &&
2481 (status & MISCSTATUS_DCD_LATCHED) ) {
2482 if ( debug_level >= DEBUG_LEVEL_ISR )
2483 printk("%s CD now %s...", info->device_name,
2484 (status & SerialSignal_DCD) ? "on" : "off");
2485 if (status & SerialSignal_DCD)
2486 wake_up_interruptible(&info->port.open_wait);
2488 if ( debug_level >= DEBUG_LEVEL_ISR )
2489 printk("doing serial hangup...");
2491 tty_hangup(info->port.tty);
2495 if ( (info->port.flags & ASYNC_CTS_FLOW) &&
2496 (status & MISCSTATUS_CTS_LATCHED) ) {
2497 if ( info->port.tty ) {
2498 if (info->port.tty->hw_stopped) {
2499 if (status & SerialSignal_CTS) {
2500 if ( debug_level >= DEBUG_LEVEL_ISR )
2501 printk("CTS tx start...");
2502 info->port.tty->hw_stopped = 0;
2504 info->pending_bh |= BH_TRANSMIT;
2508 if (!(status & SerialSignal_CTS)) {
2509 if ( debug_level >= DEBUG_LEVEL_ISR )
2510 printk("CTS tx stop...");
2511 info->port.tty->hw_stopped = 1;
2519 info->pending_bh |= BH_STATUS;
2522 /* Interrupt service routine entry point.
2525 * irq interrupt number that caused interrupt
2526 * dev_id device ID supplied during interrupt registration
2527 * regs interrupted processor context
2529 static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
2531 SLMP_INFO *info = dev_id;
2532 unsigned char status, status0, status1=0;
2533 unsigned char dmastatus, dmastatus0, dmastatus1=0;
2534 unsigned char timerstatus0, timerstatus1=0;
2535 unsigned char shift;
2539 if ( debug_level >= DEBUG_LEVEL_ISR )
2540 printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
2541 __FILE__, __LINE__, info->irq_level);
2543 spin_lock(&info->lock);
2547 /* get status for SCA0 (ports 0-1) */
2548 tmp = read_reg16(info, ISR0); /* get ISR0 and ISR1 in one read */
2549 status0 = (unsigned char)tmp;
2550 dmastatus0 = (unsigned char)(tmp>>8);
2551 timerstatus0 = read_reg(info, ISR2);
2553 if ( debug_level >= DEBUG_LEVEL_ISR )
2554 printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2555 __FILE__, __LINE__, info->device_name,
2556 status0, dmastatus0, timerstatus0);
2558 if (info->port_count == 4) {
2559 /* get status for SCA1 (ports 2-3) */
2560 tmp = read_reg16(info->port_array[2], ISR0);
2561 status1 = (unsigned char)tmp;
2562 dmastatus1 = (unsigned char)(tmp>>8);
2563 timerstatus1 = read_reg(info->port_array[2], ISR2);
2565 if ( debug_level >= DEBUG_LEVEL_ISR )
2566 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2567 __FILE__,__LINE__,info->device_name,
2568 status1,dmastatus1,timerstatus1);
2571 if (!status0 && !dmastatus0 && !timerstatus0 &&
2572 !status1 && !dmastatus1 && !timerstatus1)
2575 for(i=0; i < info->port_count ; i++) {
2576 if (info->port_array[i] == NULL)
2580 dmastatus = dmastatus0;
2583 dmastatus = dmastatus1;
2586 shift = i & 1 ? 4 :0;
2588 if (status & BIT0 << shift)
2589 isr_rxrdy(info->port_array[i]);
2590 if (status & BIT1 << shift)
2591 isr_txrdy(info->port_array[i]);
2592 if (status & BIT2 << shift)
2593 isr_rxint(info->port_array[i]);
2594 if (status & BIT3 << shift)
2595 isr_txint(info->port_array[i]);
2597 if (dmastatus & BIT0 << shift)
2598 isr_rxdmaerror(info->port_array[i]);
2599 if (dmastatus & BIT1 << shift)
2600 isr_rxdmaok(info->port_array[i]);
2601 if (dmastatus & BIT2 << shift)
2602 isr_txdmaerror(info->port_array[i]);
2603 if (dmastatus & BIT3 << shift)
2604 isr_txdmaok(info->port_array[i]);
2607 if (timerstatus0 & (BIT5 | BIT4))
2608 isr_timer(info->port_array[0]);
2609 if (timerstatus0 & (BIT7 | BIT6))
2610 isr_timer(info->port_array[1]);
2611 if (timerstatus1 & (BIT5 | BIT4))
2612 isr_timer(info->port_array[2]);
2613 if (timerstatus1 & (BIT7 | BIT6))
2614 isr_timer(info->port_array[3]);
2617 for(i=0; i < info->port_count ; i++) {
2618 SLMP_INFO * port = info->port_array[i];
2620 /* Request bottom half processing if there's something
2621 * for it to do and the bh is not already running.
2623 * Note: startup adapter diags require interrupts.
2624 * do not request bottom half processing if the
2625 * device is not open in a normal mode.
2627 if ( port && (port->port.count || port->netcount) &&
2628 port->pending_bh && !port->bh_running &&
2629 !port->bh_requested ) {
2630 if ( debug_level >= DEBUG_LEVEL_ISR )
2631 printk("%s(%d):%s queueing bh task.\n",
2632 __FILE__,__LINE__,port->device_name);
2633 schedule_work(&port->task);
2634 port->bh_requested = true;
2638 spin_unlock(&info->lock);
2640 if ( debug_level >= DEBUG_LEVEL_ISR )
2641 printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
2642 __FILE__, __LINE__, info->irq_level);
2646 /* Initialize and start device.
2648 static int startup(SLMP_INFO * info)
2650 if ( debug_level >= DEBUG_LEVEL_INFO )
2651 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2653 if (info->port.flags & ASYNC_INITIALIZED)
2656 if (!info->tx_buf) {
2657 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2658 if (!info->tx_buf) {
2659 printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2660 __FILE__,__LINE__,info->device_name);
2665 info->pending_bh = 0;
2667 memset(&info->icount, 0, sizeof(info->icount));
2669 /* program hardware for current parameters */
2672 change_params(info);
2674 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2677 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2679 info->port.flags |= ASYNC_INITIALIZED;
2684 /* Called by close() and hangup() to shutdown hardware
2686 static void shutdown(SLMP_INFO * info)
2688 unsigned long flags;
2690 if (!(info->port.flags & ASYNC_INITIALIZED))
2693 if (debug_level >= DEBUG_LEVEL_INFO)
2694 printk("%s(%d):%s synclinkmp_shutdown()\n",
2695 __FILE__,__LINE__, info->device_name );
2697 /* clear status wait queue because status changes */
2698 /* can't happen after shutting down the hardware */
2699 wake_up_interruptible(&info->status_event_wait_q);
2700 wake_up_interruptible(&info->event_wait_q);
2702 del_timer(&info->tx_timer);
2703 del_timer(&info->status_timer);
2705 kfree(info->tx_buf);
2706 info->tx_buf = NULL;
2708 spin_lock_irqsave(&info->lock,flags);
2712 if (!info->port.tty || info->port.tty->termios->c_cflag & HUPCL) {
2713 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
2717 spin_unlock_irqrestore(&info->lock,flags);
2720 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2722 info->port.flags &= ~ASYNC_INITIALIZED;
2725 static void program_hw(SLMP_INFO *info)
2727 unsigned long flags;
2729 spin_lock_irqsave(&info->lock,flags);
2734 info->tx_count = info->tx_put = info->tx_get = 0;
2736 if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2743 info->dcd_chkcount = 0;
2744 info->cts_chkcount = 0;
2745 info->ri_chkcount = 0;
2746 info->dsr_chkcount = 0;
2748 info->ie1_value |= (CDCD|CCTS);
2749 write_reg(info, IE1, info->ie1_value);
2753 if (info->netcount || (info->port.tty && info->port.tty->termios->c_cflag & CREAD) )
2756 spin_unlock_irqrestore(&info->lock,flags);
2759 /* Reconfigure adapter based on new parameters
2761 static void change_params(SLMP_INFO *info)
2766 if (!info->port.tty || !info->port.tty->termios)
2769 if (debug_level >= DEBUG_LEVEL_INFO)
2770 printk("%s(%d):%s change_params()\n",
2771 __FILE__,__LINE__, info->device_name );
2773 cflag = info->port.tty->termios->c_cflag;
2775 /* if B0 rate (hangup) specified then negate DTR and RTS */
2776 /* otherwise assert DTR and RTS */
2778 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
2780 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
2782 /* byte size and parity */
2784 switch (cflag & CSIZE) {
2785 case CS5: info->params.data_bits = 5; break;
2786 case CS6: info->params.data_bits = 6; break;
2787 case CS7: info->params.data_bits = 7; break;
2788 case CS8: info->params.data_bits = 8; break;
2789 /* Never happens, but GCC is too dumb to figure it out */
2790 default: info->params.data_bits = 7; break;
2794 info->params.stop_bits = 2;
2796 info->params.stop_bits = 1;
2798 info->params.parity = ASYNC_PARITY_NONE;
2799 if (cflag & PARENB) {
2801 info->params.parity = ASYNC_PARITY_ODD;
2803 info->params.parity = ASYNC_PARITY_EVEN;
2806 info->params.parity = ASYNC_PARITY_SPACE;
2810 /* calculate number of jiffies to transmit a full
2811 * FIFO (32 bytes) at specified data rate
2813 bits_per_char = info->params.data_bits +
2814 info->params.stop_bits + 1;
2816 /* if port data rate is set to 460800 or less then
2817 * allow tty settings to override, otherwise keep the
2818 * current data rate.
2820 if (info->params.data_rate <= 460800) {
2821 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2824 if ( info->params.data_rate ) {
2825 info->timeout = (32*HZ*bits_per_char) /
2826 info->params.data_rate;
2828 info->timeout += HZ/50; /* Add .02 seconds of slop */
2830 if (cflag & CRTSCTS)
2831 info->port.flags |= ASYNC_CTS_FLOW;
2833 info->port.flags &= ~ASYNC_CTS_FLOW;
2836 info->port.flags &= ~ASYNC_CHECK_CD;
2838 info->port.flags |= ASYNC_CHECK_CD;
2840 /* process tty input control flags */
2842 info->read_status_mask2 = OVRN;
2843 if (I_INPCK(info->port.tty))
2844 info->read_status_mask2 |= PE | FRME;
2845 if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2846 info->read_status_mask1 |= BRKD;
2847 if (I_IGNPAR(info->port.tty))
2848 info->ignore_status_mask2 |= PE | FRME;
2849 if (I_IGNBRK(info->port.tty)) {
2850 info->ignore_status_mask1 |= BRKD;
2851 /* If ignoring parity and break indicators, ignore
2852 * overruns too. (For real raw support).
2854 if (I_IGNPAR(info->port.tty))
2855 info->ignore_status_mask2 |= OVRN;
2861 static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2865 if (debug_level >= DEBUG_LEVEL_INFO)
2866 printk("%s(%d):%s get_params()\n",
2867 __FILE__,__LINE__, info->device_name);
2870 memset(&info->icount, 0, sizeof(info->icount));
2872 mutex_lock(&info->port.mutex);
2873 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2874 mutex_unlock(&info->port.mutex);
2882 static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2885 if (debug_level >= DEBUG_LEVEL_INFO)
2886 printk("%s(%d):%s get_params()\n",
2887 __FILE__,__LINE__, info->device_name);
2889 mutex_lock(&info->port.mutex);
2890 COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2891 mutex_unlock(&info->port.mutex);
2893 if ( debug_level >= DEBUG_LEVEL_INFO )
2894 printk( "%s(%d):%s get_params() user buffer copy failed\n",
2895 __FILE__,__LINE__,info->device_name);
2902 static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2904 unsigned long flags;
2905 MGSL_PARAMS tmp_params;
2908 if (debug_level >= DEBUG_LEVEL_INFO)
2909 printk("%s(%d):%s set_params\n",
2910 __FILE__,__LINE__,info->device_name );
2911 COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2913 if ( debug_level >= DEBUG_LEVEL_INFO )
2914 printk( "%s(%d):%s set_params() user buffer copy failed\n",
2915 __FILE__,__LINE__,info->device_name);
2919 mutex_lock(&info->port.mutex);
2920 spin_lock_irqsave(&info->lock,flags);
2921 memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2922 spin_unlock_irqrestore(&info->lock,flags);
2924 change_params(info);
2925 mutex_unlock(&info->port.mutex);
2930 static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2934 if (debug_level >= DEBUG_LEVEL_INFO)
2935 printk("%s(%d):%s get_txidle()=%d\n",
2936 __FILE__,__LINE__, info->device_name, info->idle_mode);
2938 COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2940 if ( debug_level >= DEBUG_LEVEL_INFO )
2941 printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
2942 __FILE__,__LINE__,info->device_name);
2949 static int set_txidle(SLMP_INFO * info, int idle_mode)
2951 unsigned long flags;
2953 if (debug_level >= DEBUG_LEVEL_INFO)
2954 printk("%s(%d):%s set_txidle(%d)\n",
2955 __FILE__,__LINE__,info->device_name, idle_mode );
2957 spin_lock_irqsave(&info->lock,flags);
2958 info->idle_mode = idle_mode;
2959 tx_set_idle( info );
2960 spin_unlock_irqrestore(&info->lock,flags);
2964 static int tx_enable(SLMP_INFO * info, int enable)
2966 unsigned long flags;
2968 if (debug_level >= DEBUG_LEVEL_INFO)
2969 printk("%s(%d):%s tx_enable(%d)\n",
2970 __FILE__,__LINE__,info->device_name, enable);
2972 spin_lock_irqsave(&info->lock,flags);
2974 if ( !info->tx_enabled ) {
2978 if ( info->tx_enabled )
2981 spin_unlock_irqrestore(&info->lock,flags);
2985 /* abort send HDLC frame
2987 static int tx_abort(SLMP_INFO * info)
2989 unsigned long flags;
2991 if (debug_level >= DEBUG_LEVEL_INFO)
2992 printk("%s(%d):%s tx_abort()\n",
2993 __FILE__,__LINE__,info->device_name);
2995 spin_lock_irqsave(&info->lock,flags);
2996 if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
2997 info->ie1_value &= ~UDRN;
2998 info->ie1_value |= IDLE;
2999 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
3000 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
3002 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
3003 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3005 write_reg(info, CMD, TXABORT);
3007 spin_unlock_irqrestore(&info->lock,flags);
3011 static int rx_enable(SLMP_INFO * info, int enable)
3013 unsigned long flags;
3015 if (debug_level >= DEBUG_LEVEL_INFO)
3016 printk("%s(%d):%s rx_enable(%d)\n",
3017 __FILE__,__LINE__,info->device_name,enable);
3019 spin_lock_irqsave(&info->lock,flags);
3021 if ( !info->rx_enabled )
3024 if ( info->rx_enabled )
3027 spin_unlock_irqrestore(&info->lock,flags);
3031 /* wait for specified event to occur
3033 static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3035 unsigned long flags;
3038 struct mgsl_icount cprev, cnow;
3041 struct _input_signal_events oldsigs, newsigs;
3042 DECLARE_WAITQUEUE(wait, current);
3044 COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3049 if (debug_level >= DEBUG_LEVEL_INFO)
3050 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3051 __FILE__,__LINE__,info->device_name,mask);
3053 spin_lock_irqsave(&info->lock,flags);
3055 /* return immediately if state matches requested events */
3057 s = info->serial_signals;
3060 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3061 ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3062 ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3063 ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3065 spin_unlock_irqrestore(&info->lock,flags);
3069 /* save current irq counts */
3070 cprev = info->icount;
3071 oldsigs = info->input_signal_events;
3073 /* enable hunt and idle irqs if needed */
3074 if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3075 unsigned char oldval = info->ie1_value;
3076 unsigned char newval = oldval +
3077 (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3078 (mask & MgslEvent_IdleReceived ? IDLD:0);
3079 if ( oldval != newval ) {
3080 info->ie1_value = newval;
3081 write_reg(info, IE1, info->ie1_value);
3085 set_current_state(TASK_INTERRUPTIBLE);
3086 add_wait_queue(&info->event_wait_q, &wait);
3088 spin_unlock_irqrestore(&info->lock,flags);
3092 if (signal_pending(current)) {
3097 /* get current irq counts */
3098 spin_lock_irqsave(&info->lock,flags);
3099 cnow = info->icount;
3100 newsigs = info->input_signal_events;
3101 set_current_state(TASK_INTERRUPTIBLE);
3102 spin_unlock_irqrestore(&info->lock,flags);
3104 /* if no change, wait aborted for some reason */
3105 if (newsigs.dsr_up == oldsigs.dsr_up &&
3106 newsigs.dsr_down == oldsigs.dsr_down &&
3107 newsigs.dcd_up == oldsigs.dcd_up &&
3108 newsigs.dcd_down == oldsigs.dcd_down &&
3109 newsigs.cts_up == oldsigs.cts_up &&
3110 newsigs.cts_down == oldsigs.cts_down &&
3111 newsigs.ri_up == oldsigs.ri_up &&
3112 newsigs.ri_down == oldsigs.ri_down &&
3113 cnow.exithunt == cprev.exithunt &&
3114 cnow.rxidle == cprev.rxidle) {
3120 ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
3121 (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3122 (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
3123 (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3124 (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
3125 (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3126 (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
3127 (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
3128 (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
3129 (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
3137 remove_wait_queue(&info->event_wait_q, &wait);
3138 set_current_state(TASK_RUNNING);
3141 if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3142 spin_lock_irqsave(&info->lock,flags);
3143 if (!waitqueue_active(&info->event_wait_q)) {
3144 /* disable enable exit hunt mode/idle rcvd IRQs */
3145 info->ie1_value &= ~(FLGD|IDLD);
3146 write_reg(info, IE1, info->ie1_value);
3148 spin_unlock_irqrestore(&info->lock,flags);
3152 PUT_USER(rc, events, mask_ptr);
3157 static int modem_input_wait(SLMP_INFO *info,int arg)
3159 unsigned long flags;
3161 struct mgsl_icount cprev, cnow;
3162 DECLARE_WAITQUEUE(wait, current);
3164 /* save current irq counts */
3165 spin_lock_irqsave(&info->lock,flags);
3166 cprev = info->icount;
3167 add_wait_queue(&info->status_event_wait_q, &wait);
3168 set_current_state(TASK_INTERRUPTIBLE);
3169 spin_unlock_irqrestore(&info->lock,flags);
3173 if (signal_pending(current)) {
3178 /* get new irq counts */
3179 spin_lock_irqsave(&info->lock,flags);
3180 cnow = info->icount;
3181 set_current_state(TASK_INTERRUPTIBLE);
3182 spin_unlock_irqrestore(&info->lock,flags);
3184 /* if no change, wait aborted for some reason */
3185 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3186 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3191 /* check for change in caller specified modem input */
3192 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3193 (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3194 (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
3195 (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3202 remove_wait_queue(&info->status_event_wait_q, &wait);
3203 set_current_state(TASK_RUNNING);
3207 /* return the state of the serial control and status signals
3209 static int tiocmget(struct tty_struct *tty)
3211 SLMP_INFO *info = tty->driver_data;
3212 unsigned int result;
3213 unsigned long flags;
3215 spin_lock_irqsave(&info->lock,flags);
3217 spin_unlock_irqrestore(&info->lock,flags);
3219 result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
3220 ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
3221 ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
3222 ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
3223 ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
3224 ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
3226 if (debug_level >= DEBUG_LEVEL_INFO)
3227 printk("%s(%d):%s tiocmget() value=%08X\n",
3228 __FILE__,__LINE__, info->device_name, result );
3232 /* set modem control signals (DTR/RTS)
3234 static int tiocmset(struct tty_struct *tty,
3235 unsigned int set, unsigned int clear)
3237 SLMP_INFO *info = tty->driver_data;
3238 unsigned long flags;
3240 if (debug_level >= DEBUG_LEVEL_INFO)
3241 printk("%s(%d):%s tiocmset(%x,%x)\n",
3242 __FILE__,__LINE__,info->device_name, set, clear);
3244 if (set & TIOCM_RTS)
3245 info->serial_signals |= SerialSignal_RTS;
3246 if (set & TIOCM_DTR)
3247 info->serial_signals |= SerialSignal_DTR;
3248 if (clear & TIOCM_RTS)
3249 info->serial_signals &= ~SerialSignal_RTS;
3250 if (clear & TIOCM_DTR)
3251 info->serial_signals &= ~SerialSignal_DTR;
3253 spin_lock_irqsave(&info->lock,flags);
3255 spin_unlock_irqrestore(&info->lock,flags);
3260 static int carrier_raised(struct tty_port *port)
3262 SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3263 unsigned long flags;
3265 spin_lock_irqsave(&info->lock,flags);
3267 spin_unlock_irqrestore(&info->lock,flags);
3269 return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3272 static void dtr_rts(struct tty_port *port, int on)
3274 SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3275 unsigned long flags;
3277 spin_lock_irqsave(&info->lock,flags);
3279 info->serial_signals |= SerialSignal_RTS + SerialSignal_DTR;
3281 info->serial_signals &= ~(SerialSignal_RTS + SerialSignal_DTR);
3283 spin_unlock_irqrestore(&info->lock,flags);
3286 /* Block the current process until the specified port is ready to open.
3288 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3291 DECLARE_WAITQUEUE(wait, current);
3293 bool do_clocal = false;
3294 bool extra_count = false;
3295 unsigned long flags;
3297 struct tty_port *port = &info->port;
3299 if (debug_level >= DEBUG_LEVEL_INFO)
3300 printk("%s(%d):%s block_til_ready()\n",
3301 __FILE__,__LINE__, tty->driver->name );
3303 if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3304 /* nonblock mode is set or port is not enabled */
3305 /* just verify that callout device is not active */
3306 port->flags |= ASYNC_NORMAL_ACTIVE;
3310 if (tty->termios->c_cflag & CLOCAL)
3313 /* Wait for carrier detect and the line to become
3314 * free (i.e., not in use by the callout). While we are in
3315 * this loop, port->count is dropped by one, so that
3316 * close() knows when to free things. We restore it upon
3317 * exit, either normal or abnormal.
3321 add_wait_queue(&port->open_wait, &wait);
3323 if (debug_level >= DEBUG_LEVEL_INFO)
3324 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3325 __FILE__,__LINE__, tty->driver->name, port->count );
3327 spin_lock_irqsave(&info->lock, flags);
3328 if (!tty_hung_up_p(filp)) {
3332 spin_unlock_irqrestore(&info->lock, flags);
3333 port->blocked_open++;
3336 if (tty->termios->c_cflag & CBAUD)
3337 tty_port_raise_dtr_rts(port);
3339 set_current_state(TASK_INTERRUPTIBLE);
3341 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3342 retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3343 -EAGAIN : -ERESTARTSYS;
3347 cd = tty_port_carrier_raised(port);
3349 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
3352 if (signal_pending(current)) {
3353 retval = -ERESTARTSYS;
3357 if (debug_level >= DEBUG_LEVEL_INFO)
3358 printk("%s(%d):%s block_til_ready() count=%d\n",
3359 __FILE__,__LINE__, tty->driver->name, port->count );
3366 set_current_state(TASK_RUNNING);
3367 remove_wait_queue(&port->open_wait, &wait);
3371 port->blocked_open--;
3373 if (debug_level >= DEBUG_LEVEL_INFO)
3374 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3375 __FILE__,__LINE__, tty->driver->name, port->count );
3378 port->flags |= ASYNC_NORMAL_ACTIVE;
3383 static int alloc_dma_bufs(SLMP_INFO *info)
3385 unsigned short BuffersPerFrame;
3386 unsigned short BufferCount;
3388 // Force allocation to start at 64K boundary for each port.
3389 // This is necessary because *all* buffer descriptors for a port
3390 // *must* be in the same 64K block. All descriptors on a port
3391 // share a common 'base' address (upper 8 bits of 24 bits) programmed
3392 // into the CBP register.
3393 info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3395 /* Calculate the number of DMA buffers necessary to hold the */
3396 /* largest allowable frame size. Note: If the max frame size is */
3397 /* not an even multiple of the DMA buffer size then we need to */
3398 /* round the buffer count per frame up one. */
3400 BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3401 if ( info->max_frame_size % SCABUFSIZE )
3404 /* calculate total number of data buffers (SCABUFSIZE) possible
3405 * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3406 * for the descriptor list (BUFFERLISTSIZE).
3408 BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3410 /* limit number of buffers to maximum amount of descriptors */
3411 if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3412 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3414 /* use enough buffers to transmit one max size frame */
3415 info->tx_buf_count = BuffersPerFrame + 1;
3417 /* never use more than half the available buffers for transmit */
3418 if (info->tx_buf_count > (BufferCount/2))
3419 info->tx_buf_count = BufferCount/2;
3421 if (info->tx_buf_count > SCAMAXDESC)
3422 info->tx_buf_count = SCAMAXDESC;
3424 /* use remaining buffers for receive */
3425 info->rx_buf_count = BufferCount - info->tx_buf_count;
3427 if (info->rx_buf_count > SCAMAXDESC)
3428 info->rx_buf_count = SCAMAXDESC;
3430 if ( debug_level >= DEBUG_LEVEL_INFO )
3431 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3432 __FILE__,__LINE__, info->device_name,
3433 info->tx_buf_count,info->rx_buf_count);
3435 if ( alloc_buf_list( info ) < 0 ||
3436 alloc_frame_bufs(info,
3438 info->rx_buf_list_ex,
3439 info->rx_buf_count) < 0 ||
3440 alloc_frame_bufs(info,
3442 info->tx_buf_list_ex,
3443 info->tx_buf_count) < 0 ||
3444 alloc_tmp_rx_buf(info) < 0 ) {
3445 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3446 __FILE__,__LINE__, info->device_name);
3450 rx_reset_buffers( info );
3455 /* Allocate DMA buffers for the transmit and receive descriptor lists.
3457 static int alloc_buf_list(SLMP_INFO *info)
3461 /* build list in adapter shared memory */
3462 info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3463 info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3464 info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3466 memset(info->buffer_list, 0, BUFFERLISTSIZE);
3468 /* Save virtual address pointers to the receive and */
3469 /* transmit buffer lists. (Receive 1st). These pointers will */
3470 /* be used by the processor to access the lists. */
3471 info->rx_buf_list = (SCADESC *)info->buffer_list;
3473 info->tx_buf_list = (SCADESC *)info->buffer_list;
3474 info->tx_buf_list += info->rx_buf_count;
3476 /* Build links for circular buffer entry lists (tx and rx)
3478 * Note: links are physical addresses read by the SCA device
3479 * to determine the next buffer entry to use.
3482 for ( i = 0; i < info->rx_buf_count; i++ ) {
3483 /* calculate and store physical address of this buffer entry */
3484 info->rx_buf_list_ex[i].phys_entry =
3485 info->buffer_list_phys + (i * sizeof(SCABUFSIZE));
3487 /* calculate and store physical address of */
3488 /* next entry in cirular list of entries */
3489 info->rx_buf_list[i].next = info->buffer_list_phys;
3490 if ( i < info->rx_buf_count - 1 )
3491 info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3493 info->rx_buf_list[i].length = SCABUFSIZE;
3496 for ( i = 0; i < info->tx_buf_count; i++ ) {
3497 /* calculate and store physical address of this buffer entry */
3498 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3499 ((info->rx_buf_count + i) * sizeof(SCADESC));
3501 /* calculate and store physical address of */
3502 /* next entry in cirular list of entries */
3504 info->tx_buf_list[i].next = info->buffer_list_phys +
3505 info->rx_buf_count * sizeof(SCADESC);
3507 if ( i < info->tx_buf_count - 1 )
3508 info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3514 /* Allocate the frame DMA buffers used by the specified buffer list.
3516 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3519 unsigned long phys_addr;
3521 for ( i = 0; i < count; i++ ) {
3522 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3523 phys_addr = info->port_array[0]->last_mem_alloc;
3524 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3526 buf_list[i].buf_ptr = (unsigned short)phys_addr;
3527 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3533 static void free_dma_bufs(SLMP_INFO *info)
3535 info->buffer_list = NULL;
3536 info->rx_buf_list = NULL;
3537 info->tx_buf_list = NULL;
3540 /* allocate buffer large enough to hold max_frame_size.
3541 * This buffer is used to pass an assembled frame to the line discipline.
3543 static int alloc_tmp_rx_buf(SLMP_INFO *info)
3545 info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3546 if (info->tmp_rx_buf == NULL)
3551 static void free_tmp_rx_buf(SLMP_INFO *info)
3553 kfree(info->tmp_rx_buf);
3554 info->tmp_rx_buf = NULL;
3557 static int claim_resources(SLMP_INFO *info)
3559 if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3560 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3561 __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3562 info->init_error = DiagStatus_AddressConflict;
3566 info->shared_mem_requested = true;
3568 if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3569 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3570 __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3571 info->init_error = DiagStatus_AddressConflict;
3575 info->lcr_mem_requested = true;
3577 if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3578 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3579 __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3580 info->init_error = DiagStatus_AddressConflict;
3584 info->sca_base_requested = true;
3586 if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3587 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3588 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3589 info->init_error = DiagStatus_AddressConflict;
3593 info->sca_statctrl_requested = true;
3595 info->memory_base = ioremap_nocache(info->phys_memory_base,
3597 if (!info->memory_base) {
3598 printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
3599 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3600 info->init_error = DiagStatus_CantAssignPciResources;
3604 info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
3605 if (!info->lcr_base) {
3606 printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
3607 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3608 info->init_error = DiagStatus_CantAssignPciResources;
3611 info->lcr_base += info->lcr_offset;
3613 info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
3614 if (!info->sca_base) {
3615 printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
3616 __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3617 info->init_error = DiagStatus_CantAssignPciResources;
3620 info->sca_base += info->sca_offset;
3622 info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
3624 if (!info->statctrl_base) {
3625 printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
3626 __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3627 info->init_error = DiagStatus_CantAssignPciResources;
3630 info->statctrl_base += info->statctrl_offset;
3632 if ( !memory_test(info) ) {
3633 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3634 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3635 info->init_error = DiagStatus_MemoryError;
3642 release_resources( info );
3646 static void release_resources(SLMP_INFO *info)
3648 if ( debug_level >= DEBUG_LEVEL_INFO )
3649 printk( "%s(%d):%s release_resources() entry\n",
3650 __FILE__,__LINE__,info->device_name );
3652 if ( info->irq_requested ) {
3653 free_irq(info->irq_level, info);
3654 info->irq_requested = false;
3657 if ( info->shared_mem_requested ) {
3658 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3659 info->shared_mem_requested = false;
3661 if ( info->lcr_mem_requested ) {
3662 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3663 info->lcr_mem_requested = false;
3665 if ( info->sca_base_requested ) {
3666 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3667 info->sca_base_requested = false;
3669 if ( info->sca_statctrl_requested ) {
3670 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3671 info->sca_statctrl_requested = false;
3674 if (info->memory_base){
3675 iounmap(info->memory_base);
3676 info->memory_base = NULL;
3679 if (info->sca_base) {
3680 iounmap(info->sca_base - info->sca_offset);
3681 info->sca_base=NULL;
3684 if (info->statctrl_base) {
3685 iounmap(info->statctrl_base - info->statctrl_offset);
3686 info->statctrl_base=NULL;
3689 if (info->lcr_base){
3690 iounmap(info->lcr_base - info->lcr_offset);
3691 info->lcr_base = NULL;
3694 if ( debug_level >= DEBUG_LEVEL_INFO )
3695 printk( "%s(%d):%s release_resources() exit\n",
3696 __FILE__,__LINE__,info->device_name );
3699 /* Add the specified device instance data structure to the
3700 * global linked list of devices and increment the device count.
3702 static void add_device(SLMP_INFO *info)
3704 info->next_device = NULL;
3705 info->line = synclinkmp_device_count;
3706 sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3708 if (info->line < MAX_DEVICES) {
3709 if (maxframe[info->line])
3710 info->max_frame_size = maxframe[info->line];
3713 synclinkmp_device_count++;
3715 if ( !synclinkmp_device_list )
3716 synclinkmp_device_list = info;
3718 SLMP_INFO *current_dev = synclinkmp_device_list;
3719 while( current_dev->next_device )
3720 current_dev = current_dev->next_device;
3721 current_dev->next_device = info;
3724 if ( info->max_frame_size < 4096 )
3725 info->max_frame_size = 4096;
3726 else if ( info->max_frame_size > 65535 )
3727 info->max_frame_size = 65535;
3729 printk( "SyncLink MultiPort %s: "
3730 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3732 info->phys_sca_base,
3733 info->phys_memory_base,
3734 info->phys_statctrl_base,
3735 info->phys_lcr_base,
3737 info->max_frame_size );
3739 #if SYNCLINK_GENERIC_HDLC
3744 static const struct tty_port_operations port_ops = {
3745 .carrier_raised = carrier_raised,
3749 /* Allocate and initialize a device instance structure
3751 * Return Value: pointer to SLMP_INFO if success, otherwise NULL
3753 static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3757 info = kzalloc(sizeof(SLMP_INFO),
3761 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3762 __FILE__,__LINE__, adapter_num, port_num);
3764 tty_port_init(&info->port);
3765 info->port.ops = &port_ops;
3766 info->magic = MGSL_MAGIC;
3767 INIT_WORK(&info->task, bh_handler);
3768 info->max_frame_size = 4096;
3769 info->port.close_delay = 5*HZ/10;
3770 info->port.closing_wait = 30*HZ;
3771 init_waitqueue_head(&info->status_event_wait_q);
3772 init_waitqueue_head(&info->event_wait_q);
3773 spin_lock_init(&info->netlock);
3774 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3775 info->idle_mode = HDLC_TXIDLE_FLAGS;
3776 info->adapter_num = adapter_num;
3777 info->port_num = port_num;
3779 /* Copy configuration info to device instance data */
3780 info->irq_level = pdev->irq;
3781 info->phys_lcr_base = pci_resource_start(pdev,0);
3782 info->phys_sca_base = pci_resource_start(pdev,2);
3783 info->phys_memory_base = pci_resource_start(pdev,3);
3784 info->phys_statctrl_base = pci_resource_start(pdev,4);
3786 /* Because veremap only works on page boundaries we must map
3787 * a larger area than is actually implemented for the LCR
3788 * memory range. We map a full page starting at the page boundary.
3790 info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
3791 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3793 info->sca_offset = info->phys_sca_base & (PAGE_SIZE-1);
3794 info->phys_sca_base &= ~(PAGE_SIZE-1);
3796 info->statctrl_offset = info->phys_statctrl_base & (PAGE_SIZE-1);
3797 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3799 info->bus_type = MGSL_BUS_TYPE_PCI;
3800 info->irq_flags = IRQF_SHARED;
3802 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3803 setup_timer(&info->status_timer, status_timeout,
3804 (unsigned long)info);
3806 /* Store the PCI9050 misc control register value because a flaw
3807 * in the PCI9050 prevents LCR registers from being read if
3808 * BIOS assigns an LCR base address with bit 7 set.
3810 * Only the misc control register is accessed for which only
3811 * write access is needed, so set an initial value and change
3812 * bits to the device instance data as we write the value
3813 * to the actual misc control register.
3815 info->misc_ctrl_value = 0x087e4546;
3817 /* initial port state is unknown - if startup errors
3818 * occur, init_error will be set to indicate the
3819 * problem. Once the port is fully initialized,
3820 * this value will be set to 0 to indicate the
3821 * port is available.
3823 info->init_error = -1;
3829 static void device_init(int adapter_num, struct pci_dev *pdev)
3831 SLMP_INFO *port_array[SCA_MAX_PORTS];
3834 /* allocate device instances for up to SCA_MAX_PORTS devices */
3835 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3836 port_array[port] = alloc_dev(adapter_num,port,pdev);
3837 if( port_array[port] == NULL ) {
3838 for ( --port; port >= 0; --port )
3839 kfree(port_array[port]);
3844 /* give copy of port_array to all ports and add to device list */
3845 for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3846 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3847 add_device( port_array[port] );
3848 spin_lock_init(&port_array[port]->lock);
3851 /* Allocate and claim adapter resources */
3852 if ( !claim_resources(port_array[0]) ) {
3854 alloc_dma_bufs(port_array[0]);
3856 /* copy resource information from first port to others */
3857 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3858 port_array[port]->lock = port_array[0]->lock;
3859 port_array[port]->irq_level = port_array[0]->irq_level;
3860 port_array[port]->memory_base = port_array[0]->memory_base;
3861 port_array[port]->sca_base = port_array[0]->sca_base;
3862 port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3863 port_array[port]->lcr_base = port_array[0]->lcr_base;
3864 alloc_dma_bufs(port_array[port]);
3867 if ( request_irq(port_array[0]->irq_level,
3868 synclinkmp_interrupt,
3869 port_array[0]->irq_flags,
3870 port_array[0]->device_name,
3871 port_array[0]) < 0 ) {
3872 printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
3874 port_array[0]->device_name,
3875 port_array[0]->irq_level );
3878 port_array[0]->irq_requested = true;
3879 adapter_test(port_array[0]);
3884 static const struct tty_operations ops = {
3888 .put_char = put_char,
3889 .flush_chars = flush_chars,
3890 .write_room = write_room,
3891 .chars_in_buffer = chars_in_buffer,
3892 .flush_buffer = flush_buffer,
3894 .throttle = throttle,
3895 .unthrottle = unthrottle,
3896 .send_xchar = send_xchar,
3897 .break_ctl = set_break,
3898 .wait_until_sent = wait_until_sent,
3899 .set_termios = set_termios,
3901 .start = tx_release,
3903 .tiocmget = tiocmget,
3904 .tiocmset = tiocmset,
3905 .get_icount = get_icount,
3906 .proc_fops = &synclinkmp_proc_fops,
3910 static void synclinkmp_cleanup(void)
3916 printk("Unloading %s %s\n", driver_name, driver_version);
3918 if (serial_driver) {
3919 if ((rc = tty_unregister_driver(serial_driver)))
3920 printk("%s(%d) failed to unregister tty driver err=%d\n",
3921 __FILE__,__LINE__,rc);
3922 put_tty_driver(serial_driver);
3926 info = synclinkmp_device_list;
3929 info = info->next_device;
3932 /* release devices */
3933 info = synclinkmp_device_list;
3935 #if SYNCLINK_GENERIC_HDLC
3938 free_dma_bufs(info);
3939 free_tmp_rx_buf(info);
3940 if ( info->port_num == 0 ) {
3942 write_reg(info, LPR, 1); /* set low power mode */
3943 release_resources(info);
3946 info = info->next_device;
3950 pci_unregister_driver(&synclinkmp_pci_driver);
3953 /* Driver initialization entry point.
3956 static int __init synclinkmp_init(void)
3960 if (break_on_load) {
3961 synclinkmp_get_text_ptr();
3965 printk("%s %s\n", driver_name, driver_version);
3967 if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3968 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3972 serial_driver = alloc_tty_driver(128);
3973 if (!serial_driver) {
3978 /* Initialize the tty_driver structure */
3980 serial_driver->driver_name = "synclinkmp";
3981 serial_driver->name = "ttySLM";
3982 serial_driver->major = ttymajor;
3983 serial_driver->minor_start = 64;
3984 serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3985 serial_driver->subtype = SERIAL_TYPE_NORMAL;
3986 serial_driver->init_termios = tty_std_termios;
3987 serial_driver->init_termios.c_cflag =
3988 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3989 serial_driver->init_termios.c_ispeed = 9600;
3990 serial_driver->init_termios.c_ospeed = 9600;
3991 serial_driver->flags = TTY_DRIVER_REAL_RAW;
3992 tty_set_operations(serial_driver, &ops);
3993 if ((rc = tty_register_driver(serial_driver)) < 0) {
3994 printk("%s(%d):Couldn't register serial driver\n",
3996 put_tty_driver(serial_driver);
3997 serial_driver = NULL;
4001 printk("%s %s, tty major#%d\n",
4002 driver_name, driver_version,
4003 serial_driver->major);
4008 synclinkmp_cleanup();
4012 static void __exit synclinkmp_exit(void)
4014 synclinkmp_cleanup();
4017 module_init(synclinkmp_init);
4018 module_exit(synclinkmp_exit);
4020 /* Set the port for internal loopback mode.
4021 * The TxCLK and RxCLK signals are generated from the BRG and
4022 * the TxD is looped back to the RxD internally.
4024 static void enable_loopback(SLMP_INFO *info, int enable)
4027 /* MD2 (Mode Register 2)
4028 * 01..00 CNCT<1..0> Channel Connection 11=Local Loopback
4030 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4032 /* degate external TxC clock source */
4033 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4034 write_control_reg(info);
4036 /* RXS/TXS (Rx/Tx clock source)
4037 * 07 Reserved, must be 0
4038 * 06..04 Clock Source, 100=BRG
4039 * 03..00 Clock Divisor, 0000=1
4041 write_reg(info, RXS, 0x40);
4042 write_reg(info, TXS, 0x40);
4045 /* MD2 (Mode Register 2)
4046 * 01..00 CNCT<1..0> Channel connection, 0=normal
4048 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4050 /* RXS/TXS (Rx/Tx clock source)
4051 * 07 Reserved, must be 0
4052 * 06..04 Clock Source, 000=RxC/TxC Pin
4053 * 03..00 Clock Divisor, 0000=1
4055 write_reg(info, RXS, 0x00);
4056 write_reg(info, TXS, 0x00);
4059 /* set LinkSpeed if available, otherwise default to 2Mbps */
4060 if (info->params.clock_speed)
4061 set_rate(info, info->params.clock_speed);
4063 set_rate(info, 3686400);
4066 /* Set the baud rate register to the desired speed
4068 * data_rate data rate of clock in bits per second
4069 * A data rate of 0 disables the AUX clock.
4071 static void set_rate( SLMP_INFO *info, u32 data_rate )
4074 unsigned char BRValue;
4077 /* fBRG = fCLK/(TMC * 2^BR)
4079 if (data_rate != 0) {
4080 Divisor = 14745600/data_rate;
4087 if (TMCValue != 1 && TMCValue != 2) {
4088 /* BRValue of 0 provides 50/50 duty cycle *only* when
4089 * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4096 /* while TMCValue is too big for TMC register, divide
4097 * by 2 and increment BR exponent.
4099 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4102 write_reg(info, TXS,
4103 (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4104 write_reg(info, RXS,
4105 (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4106 write_reg(info, TMC, (unsigned char)TMCValue);
4109 write_reg(info, TXS,0);
4110 write_reg(info, RXS,0);
4111 write_reg(info, TMC, 0);
4117 static void rx_stop(SLMP_INFO *info)
4119 if (debug_level >= DEBUG_LEVEL_ISR)
4120 printk("%s(%d):%s rx_stop()\n",
4121 __FILE__,__LINE__, info->device_name );
4123 write_reg(info, CMD, RXRESET);
4125 info->ie0_value &= ~RXRDYE;
4126 write_reg(info, IE0, info->ie0_value); /* disable Rx data interrupts */
4128 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4129 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4130 write_reg(info, RXDMA + DIR, 0); /* disable Rx DMA interrupts */
4132 info->rx_enabled = false;
4133 info->rx_overflow = false;
4136 /* enable the receiver
4138 static void rx_start(SLMP_INFO *info)
4142 if (debug_level >= DEBUG_LEVEL_ISR)
4143 printk("%s(%d):%s rx_start()\n",
4144 __FILE__,__LINE__, info->device_name );
4146 write_reg(info, CMD, RXRESET);
4148 if ( info->params.mode == MGSL_MODE_HDLC ) {
4149 /* HDLC, disabe IRQ on rxdata */
4150 info->ie0_value &= ~RXRDYE;
4151 write_reg(info, IE0, info->ie0_value);
4153 /* Reset all Rx DMA buffers and program rx dma */
4154 write_reg(info, RXDMA + DSR, 0); /* disable Rx DMA */
4155 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4157 for (i = 0; i < info->rx_buf_count; i++) {
4158 info->rx_buf_list[i].status = 0xff;
4160 // throttle to 4 shared memory writes at a time to prevent
4161 // hogging local bus (keep latency time for DMA requests low).
4163 read_status_reg(info);
4165 info->current_rx_buf = 0;
4167 /* set current/1st descriptor address */
4168 write_reg16(info, RXDMA + CDA,
4169 info->rx_buf_list_ex[0].phys_entry);
4171 /* set new last rx descriptor address */
4172 write_reg16(info, RXDMA + EDA,
4173 info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4175 /* set buffer length (shared by all rx dma data buffers) */
4176 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4178 write_reg(info, RXDMA + DIR, 0x60); /* enable Rx DMA interrupts (EOM/BOF) */
4179 write_reg(info, RXDMA + DSR, 0xf2); /* clear Rx DMA IRQs, enable Rx DMA */
4181 /* async, enable IRQ on rxdata */
4182 info->ie0_value |= RXRDYE;
4183 write_reg(info, IE0, info->ie0_value);
4186 write_reg(info, CMD, RXENABLE);
4188 info->rx_overflow = false;
4189 info->rx_enabled = true;
4192 /* Enable the transmitter and send a transmit frame if
4193 * one is loaded in the DMA buffers.
4195 static void tx_start(SLMP_INFO *info)
4197 if (debug_level >= DEBUG_LEVEL_ISR)
4198 printk("%s(%d):%s tx_start() tx_count=%d\n",
4199 __FILE__,__LINE__, info->device_name,info->tx_count );
4201 if (!info->tx_enabled ) {
4202 write_reg(info, CMD, TXRESET);
4203 write_reg(info, CMD, TXENABLE);
4204 info->tx_enabled = true;
4207 if ( info->tx_count ) {
4209 /* If auto RTS enabled and RTS is inactive, then assert */
4210 /* RTS and set a flag indicating that the driver should */
4211 /* negate RTS when the transmission completes. */
4213 info->drop_rts_on_tx_done = false;
4215 if (info->params.mode != MGSL_MODE_ASYNC) {
4217 if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4218 get_signals( info );
4219 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4220 info->serial_signals |= SerialSignal_RTS;
4221 set_signals( info );
4222 info->drop_rts_on_tx_done = true;
4226 write_reg16(info, TRC0,
4227 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4229 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4230 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4232 /* set TX CDA (current descriptor address) */
4233 write_reg16(info, TXDMA + CDA,
4234 info->tx_buf_list_ex[0].phys_entry);
4236 /* set TX EDA (last descriptor address) */
4237 write_reg16(info, TXDMA + EDA,
4238 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4240 /* enable underrun IRQ */
4241 info->ie1_value &= ~IDLE;
4242 info->ie1_value |= UDRN;
4243 write_reg(info, IE1, info->ie1_value);
4244 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4246 write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
4247 write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
4249 mod_timer(&info->tx_timer, jiffies +
4250 msecs_to_jiffies(5000));
4254 /* async, enable IRQ on txdata */
4255 info->ie0_value |= TXRDYE;
4256 write_reg(info, IE0, info->ie0_value);
4259 info->tx_active = true;
4263 /* stop the transmitter and DMA
4265 static void tx_stop( SLMP_INFO *info )
4267 if (debug_level >= DEBUG_LEVEL_ISR)
4268 printk("%s(%d):%s tx_stop()\n",
4269 __FILE__,__LINE__, info->device_name );
4271 del_timer(&info->tx_timer);
4273 write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
4274 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4276 write_reg(info, CMD, TXRESET);
4278 info->ie1_value &= ~(UDRN + IDLE);
4279 write_reg(info, IE1, info->ie1_value); /* disable tx status interrupts */
4280 write_reg(info, SR1, (unsigned char)(IDLE + UDRN)); /* clear pending */
4282 info->ie0_value &= ~TXRDYE;
4283 write_reg(info, IE0, info->ie0_value); /* disable tx data interrupts */
4285 info->tx_enabled = false;
4286 info->tx_active = false;
4289 /* Fill the transmit FIFO until the FIFO is full or
4290 * there is no more data to load.
4292 static void tx_load_fifo(SLMP_INFO *info)
4296 /* do nothing is now tx data available and no XON/XOFF pending */
4298 if ( !info->tx_count && !info->x_char )
4301 /* load the Transmit FIFO until FIFOs full or all data sent */
4303 while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4305 /* there is more space in the transmit FIFO and */
4306 /* there is more data in transmit buffer */
4308 if ( (info->tx_count > 1) && !info->x_char ) {
4310 TwoBytes[0] = info->tx_buf[info->tx_get++];
4311 if (info->tx_get >= info->max_frame_size)
4312 info->tx_get -= info->max_frame_size;
4313 TwoBytes[1] = info->tx_buf[info->tx_get++];
4314 if (info->tx_get >= info->max_frame_size)
4315 info->tx_get -= info->max_frame_size;
4317 write_reg16(info, TRB, *((u16 *)TwoBytes));
4319 info->tx_count -= 2;
4320 info->icount.tx += 2;
4322 /* only 1 byte left to transmit or 1 FIFO slot left */
4325 /* transmit pending high priority char */
4326 write_reg(info, TRB, info->x_char);
4329 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4330 if (info->tx_get >= info->max_frame_size)
4331 info->tx_get -= info->max_frame_size;
4339 /* Reset a port to a known state
4341 static void reset_port(SLMP_INFO *info)
4343 if (info->sca_base) {
4348 info->serial_signals &= ~(SerialSignal_DTR + SerialSignal_RTS);
4351 /* disable all port interrupts */
4352 info->ie0_value = 0;
4353 info->ie1_value = 0;
4354 info->ie2_value = 0;
4355 write_reg(info, IE0, info->ie0_value);
4356 write_reg(info, IE1, info->ie1_value);
4357 write_reg(info, IE2, info->ie2_value);
4359 write_reg(info, CMD, CHRESET);
4363 /* Reset all the ports to a known state.
4365 static void reset_adapter(SLMP_INFO *info)
4369 for ( i=0; i < SCA_MAX_PORTS; ++i) {
4370 if (info->port_array[i])
4371 reset_port(info->port_array[i]);
4375 /* Program port for asynchronous communications.
4377 static void async_mode(SLMP_INFO *info)
4380 unsigned char RegValue;
4385 /* MD0, Mode Register 0
4387 * 07..05 PRCTL<2..0>, Protocol Mode, 000=async
4388 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4389 * 03 Reserved, must be 0
4390 * 02 CRCCC, CRC Calculation, 0=disabled
4391 * 01..00 STOP<1..0> Stop bits (00=1,10=2)
4396 if (info->params.stop_bits != 1)
4398 write_reg(info, MD0, RegValue);
4400 /* MD1, Mode Register 1
4402 * 07..06 BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4403 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4404 * 03..02 RXCHR<1..0>, rx char size
4405 * 01..00 PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4410 switch (info->params.data_bits) {
4411 case 7: RegValue |= BIT4 + BIT2; break;
4412 case 6: RegValue |= BIT5 + BIT3; break;
4413 case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4415 if (info->params.parity != ASYNC_PARITY_NONE) {
4417 if (info->params.parity == ASYNC_PARITY_ODD)
4420 write_reg(info, MD1, RegValue);
4422 /* MD2, Mode Register 2
4424 * 07..02 Reserved, must be 0
4425 * 01..00 CNCT<1..0> Channel connection, 00=normal 11=local loopback
4430 if (info->params.loopback)
4431 RegValue |= (BIT1 + BIT0);
4432 write_reg(info, MD2, RegValue);
4434 /* RXS, Receive clock source
4436 * 07 Reserved, must be 0
4437 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4438 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4441 write_reg(info, RXS, RegValue);
4443 /* TXS, Transmit clock source
4445 * 07 Reserved, must be 0
4446 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4447 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4450 write_reg(info, TXS, RegValue);
4454 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4456 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4457 write_control_reg(info);
4461 /* RRC Receive Ready Control 0
4463 * 07..05 Reserved, must be 0
4464 * 04..00 RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4466 write_reg(info, RRC, 0x00);
4468 /* TRC0 Transmit Ready Control 0
4470 * 07..05 Reserved, must be 0
4471 * 04..00 TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4473 write_reg(info, TRC0, 0x10);
4475 /* TRC1 Transmit Ready Control 1
4477 * 07..05 Reserved, must be 0
4478 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4480 write_reg(info, TRC1, 0x1e);
4482 /* CTL, MSCI control register
4484 * 07..06 Reserved, set to 0
4485 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4486 * 04 IDLC, idle control, 0=mark 1=idle register
4487 * 03 BRK, break, 0=off 1 =on (async)
4488 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4489 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4490 * 00 RTS, RTS output control, 0=active 1=inactive
4495 if (!(info->serial_signals & SerialSignal_RTS))
4497 write_reg(info, CTL, RegValue);
4499 /* enable status interrupts */
4500 info->ie0_value |= TXINTE + RXINTE;
4501 write_reg(info, IE0, info->ie0_value);
4503 /* enable break detect interrupt */
4504 info->ie1_value = BRKD;
4505 write_reg(info, IE1, info->ie1_value);
4507 /* enable rx overrun interrupt */
4508 info->ie2_value = OVRN;
4509 write_reg(info, IE2, info->ie2_value);
4511 set_rate( info, info->params.data_rate * 16 );
4514 /* Program the SCA for HDLC communications.
4516 static void hdlc_mode(SLMP_INFO *info)
4518 unsigned char RegValue;
4521 // Can't use DPLL because SCA outputs recovered clock on RxC when
4522 // DPLL mode selected. This causes output contention with RxC receiver.
4523 // Use of DPLL would require external hardware to disable RxC receiver
4524 // when DPLL mode selected.
4525 info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4527 /* disable DMA interrupts */
4528 write_reg(info, TXDMA + DIR, 0);
4529 write_reg(info, RXDMA + DIR, 0);
4531 /* MD0, Mode Register 0
4533 * 07..05 PRCTL<2..0>, Protocol Mode, 100=HDLC
4534 * 04 AUTO, Auto-enable (RTS/CTS/DCD)
4535 * 03 Reserved, must be 0
4536 * 02 CRCCC, CRC Calculation, 1=enabled
4537 * 01 CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4538 * 00 CRC0, CRC initial value, 1 = all 1s
4543 if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4545 if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4547 if (info->params.crc_type == HDLC_CRC_16_CCITT)
4548 RegValue |= BIT2 + BIT1;
4549 write_reg(info, MD0, RegValue);
4551 /* MD1, Mode Register 1
4553 * 07..06 ADDRS<1..0>, Address detect, 00=no addr check
4554 * 05..04 TXCHR<1..0>, tx char size, 00=8 bits
4555 * 03..02 RXCHR<1..0>, rx char size, 00=8 bits
4556 * 01..00 PMPM<1..0>, Parity mode, 00=no parity
4561 write_reg(info, MD1, RegValue);
4563 /* MD2, Mode Register 2
4565 * 07 NRZFM, 0=NRZ, 1=FM
4566 * 06..05 CODE<1..0> Encoding, 00=NRZ
4567 * 04..03 DRATE<1..0> DPLL Divisor, 00=8
4568 * 02 Reserved, must be 0
4569 * 01..00 CNCT<1..0> Channel connection, 0=normal
4574 switch(info->params.encoding) {
4575 case HDLC_ENCODING_NRZI: RegValue |= BIT5; break;
4576 case HDLC_ENCODING_BIPHASE_MARK: RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4577 case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4578 case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break; /* aka Manchester */
4580 case HDLC_ENCODING_NRZB: /* not supported */
4581 case HDLC_ENCODING_NRZI_MARK: /* not supported */
4582 case HDLC_ENCODING_DIFF_BIPHASE_LEVEL: /* not supported */
4585 if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4588 } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4594 write_reg(info, MD2, RegValue);
4597 /* RXS, Receive clock source
4599 * 07 Reserved, must be 0
4600 * 06..04 RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4601 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4604 if (info->params.flags & HDLC_FLAG_RXC_BRG)
4606 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4607 RegValue |= BIT6 + BIT5;
4608 write_reg(info, RXS, RegValue);
4610 /* TXS, Transmit clock source
4612 * 07 Reserved, must be 0
4613 * 06..04 RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4614 * 03..00 RXBR<3..0>, rate divisor, 0000=1
4617 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4619 if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4620 RegValue |= BIT6 + BIT5;
4621 write_reg(info, TXS, RegValue);
4623 if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4624 set_rate(info, info->params.clock_speed * DpllDivisor);
4626 set_rate(info, info->params.clock_speed);
4628 /* GPDATA (General Purpose I/O Data Register)
4630 * 6,4,2,0 CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4632 if (info->params.flags & HDLC_FLAG_TXC_BRG)
4633 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4635 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4636 write_control_reg(info);
4638 /* RRC Receive Ready Control 0
4640 * 07..05 Reserved, must be 0
4641 * 04..00 RRC<4..0> Rx FIFO trigger active
4643 write_reg(info, RRC, rx_active_fifo_level);
4645 /* TRC0 Transmit Ready Control 0
4647 * 07..05 Reserved, must be 0
4648 * 04..00 TRC<4..0> Tx FIFO trigger active
4650 write_reg(info, TRC0, tx_active_fifo_level);
4652 /* TRC1 Transmit Ready Control 1
4654 * 07..05 Reserved, must be 0
4655 * 04..00 TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4657 write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4659 /* DMR, DMA Mode Register
4661 * 07..05 Reserved, must be 0
4662 * 04 TMOD, Transfer Mode: 1=chained-block
4663 * 03 Reserved, must be 0
4664 * 02 NF, Number of Frames: 1=multi-frame
4665 * 01 CNTE, Frame End IRQ Counter enable: 0=disabled
4666 * 00 Reserved, must be 0
4670 write_reg(info, TXDMA + DMR, 0x14);
4671 write_reg(info, RXDMA + DMR, 0x14);
4673 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4674 write_reg(info, RXDMA + CPB,
4675 (unsigned char)(info->buffer_list_phys >> 16));
4677 /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4678 write_reg(info, TXDMA + CPB,
4679 (unsigned char)(info->buffer_list_phys >> 16));
4681 /* enable status interrupts. other code enables/disables
4682 * the individual sources for these two interrupt classes.
4684 info->ie0_value |= TXINTE + RXINTE;
4685 write_reg(info, IE0, info->ie0_value);
4687 /* CTL, MSCI control register
4689 * 07..06 Reserved, set to 0
4690 * 05 UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4691 * 04 IDLC, idle control, 0=mark 1=idle register
4692 * 03 BRK, break, 0=off 1 =on (async)
4693 * 02 SYNCLD, sync char load enable (BSC) 1=enabled
4694 * 01 GOP, go active on poll (LOOP mode) 1=enabled
4695 * 00 RTS, RTS output control, 0=active 1=inactive
4700 if (!(info->serial_signals & SerialSignal_RTS))
4702 write_reg(info, CTL, RegValue);
4704 /* preamble not supported ! */
4710 set_rate(info, info->params.clock_speed);
4712 if (info->params.loopback)
4713 enable_loopback(info,1);
4716 /* Set the transmit HDLC idle mode
4718 static void tx_set_idle(SLMP_INFO *info)
4720 unsigned char RegValue = 0xff;
4722 /* Map API idle mode to SCA register bits */
4723 switch(info->idle_mode) {
4724 case HDLC_TXIDLE_FLAGS: RegValue = 0x7e; break;
4725 case HDLC_TXIDLE_ALT_ZEROS_ONES: RegValue = 0xaa; break;
4726 case HDLC_TXIDLE_ZEROS: RegValue = 0x00; break;
4727 case HDLC_TXIDLE_ONES: RegValue = 0xff; break;
4728 case HDLC_TXIDLE_ALT_MARK_SPACE: RegValue = 0xaa; break;
4729 case HDLC_TXIDLE_SPACE: RegValue = 0x00; break;
4730 case HDLC_TXIDLE_MARK: RegValue = 0xff; break;
4733 write_reg(info, IDL, RegValue);
4736 /* Query the adapter for the state of the V24 status (input) signals.
4738 static void get_signals(SLMP_INFO *info)
4740 u16 status = read_reg(info, SR3);
4741 u16 gpstatus = read_status_reg(info);
4744 /* clear all serial signals except DTR and RTS */
4745 info->serial_signals &= SerialSignal_DTR + SerialSignal_RTS;
4747 /* set serial signal bits to reflect MISR */
4749 if (!(status & BIT3))
4750 info->serial_signals |= SerialSignal_CTS;
4752 if ( !(status & BIT2))
4753 info->serial_signals |= SerialSignal_DCD;
4755 testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4756 if (!(gpstatus & testbit))
4757 info->serial_signals |= SerialSignal_RI;
4759 testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4760 if (!(gpstatus & testbit))
4761 info->serial_signals |= SerialSignal_DSR;
4764 /* Set the state of DTR and RTS based on contents of
4765 * serial_signals member of device context.
4767 static void set_signals(SLMP_INFO *info)
4769 unsigned char RegValue;
4772 RegValue = read_reg(info, CTL);
4773 if (info->serial_signals & SerialSignal_RTS)
4777 write_reg(info, CTL, RegValue);
4779 // Port 0..3 DTR is ctrl reg <1,3,5,7>
4780 EnableBit = BIT1 << (info->port_num*2);
4781 if (info->serial_signals & SerialSignal_DTR)
4782 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4784 info->port_array[0]->ctrlreg_value |= EnableBit;
4785 write_control_reg(info);
4788 /*******************/
4789 /* DMA Buffer Code */
4790 /*******************/
4792 /* Set the count for all receive buffers to SCABUFSIZE
4793 * and set the current buffer to the first buffer. This effectively
4794 * makes all buffers free and discards any data in buffers.
4796 static void rx_reset_buffers(SLMP_INFO *info)
4798 rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4801 /* Free the buffers used by a received frame
4803 * info pointer to device instance data
4804 * first index of 1st receive buffer of frame
4805 * last index of last receive buffer of frame
4807 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4812 /* reset current buffer for reuse */
4813 info->rx_buf_list[first].status = 0xff;
4815 if (first == last) {
4817 /* set new last rx descriptor address */
4818 write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4822 if (first == info->rx_buf_count)
4826 /* set current buffer to next buffer after last buffer of frame */
4827 info->current_rx_buf = first;
4830 /* Return a received frame from the receive DMA buffers.
4831 * Only frames received without errors are returned.
4833 * Return Value: true if frame returned, otherwise false
4835 static bool rx_get_frame(SLMP_INFO *info)
4837 unsigned int StartIndex, EndIndex; /* index of 1st and last buffers of Rx frame */
4838 unsigned short status;
4839 unsigned int framesize = 0;
4840 bool ReturnCode = false;
4841 unsigned long flags;
4842 struct tty_struct *tty = info->port.tty;
4843 unsigned char addr_field = 0xff;
4845 SCADESC_EX *desc_ex;
4848 /* assume no frame returned, set zero length */
4853 * current_rx_buf points to the 1st buffer of the next available
4854 * receive frame. To find the last buffer of the frame look for
4855 * a non-zero status field in the buffer entries. (The status
4856 * field is set by the 16C32 after completing a receive frame.
4858 StartIndex = EndIndex = info->current_rx_buf;
4861 desc = &info->rx_buf_list[EndIndex];
4862 desc_ex = &info->rx_buf_list_ex[EndIndex];
4864 if (desc->status == 0xff)
4865 goto Cleanup; /* current desc still in use, no frames available */
4867 if (framesize == 0 && info->params.addr_filter != 0xff)
4868 addr_field = desc_ex->virt_addr[0];
4870 framesize += desc->length;
4872 /* Status != 0 means last buffer of frame */
4877 if (EndIndex == info->rx_buf_count)
4880 if (EndIndex == info->current_rx_buf) {
4881 /* all buffers have been 'used' but none mark */
4882 /* the end of a frame. Reset buffers and receiver. */
4883 if ( info->rx_enabled ){
4884 spin_lock_irqsave(&info->lock,flags);
4886 spin_unlock_irqrestore(&info->lock,flags);
4893 /* check status of receive frame */
4895 /* frame status is byte stored after frame data
4897 * 7 EOM (end of msg), 1 = last buffer of frame
4898 * 6 Short Frame, 1 = short frame
4899 * 5 Abort, 1 = frame aborted
4900 * 4 Residue, 1 = last byte is partial
4901 * 3 Overrun, 1 = overrun occurred during frame reception
4902 * 2 CRC, 1 = CRC error detected
4905 status = desc->status;
4907 /* ignore CRC bit if not using CRC (bit is undefined) */
4908 /* Note:CRC is not save to data buffer */
4909 if (info->params.crc_type == HDLC_CRC_NONE)
4912 if (framesize == 0 ||
4913 (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4914 /* discard 0 byte frames, this seems to occur sometime
4915 * when remote is idling flags.
4917 rx_free_frame_buffers(info, StartIndex, EndIndex);
4924 if (status & (BIT6+BIT5+BIT3+BIT2)) {
4925 /* received frame has errors,
4926 * update counts and mark frame size as 0
4929 info->icount.rxshort++;
4930 else if (status & BIT5)
4931 info->icount.rxabort++;
4932 else if (status & BIT3)
4933 info->icount.rxover++;
4935 info->icount.rxcrc++;
4938 #if SYNCLINK_GENERIC_HDLC
4940 info->netdev->stats.rx_errors++;
4941 info->netdev->stats.rx_frame_errors++;
4946 if ( debug_level >= DEBUG_LEVEL_BH )
4947 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4948 __FILE__,__LINE__,info->device_name,status,framesize);
4950 if ( debug_level >= DEBUG_LEVEL_DATA )
4951 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4952 min_t(unsigned int, framesize, SCABUFSIZE), 0);
4955 if (framesize > info->max_frame_size)
4956 info->icount.rxlong++;
4958 /* copy dma buffer(s) to contiguous intermediate buffer */
4959 int copy_count = framesize;
4960 int index = StartIndex;
4961 unsigned char *ptmp = info->tmp_rx_buf;
4962 info->tmp_rx_buf_count = framesize;
4964 info->icount.rxok++;
4967 int partial_count = min(copy_count,SCABUFSIZE);
4969 info->rx_buf_list_ex[index].virt_addr,
4971 ptmp += partial_count;
4972 copy_count -= partial_count;
4974 if ( ++index == info->rx_buf_count )
4978 #if SYNCLINK_GENERIC_HDLC
4980 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
4983 ldisc_receive_buf(tty,info->tmp_rx_buf,
4984 info->flag_buf, framesize);
4987 /* Free the buffers used by this frame. */
4988 rx_free_frame_buffers( info, StartIndex, EndIndex );
4993 if ( info->rx_enabled && info->rx_overflow ) {
4994 /* Receiver is enabled, but needs to restarted due to
4995 * rx buffer overflow. If buffers are empty, restart receiver.
4997 if (info->rx_buf_list[EndIndex].status == 0xff) {
4998 spin_lock_irqsave(&info->lock,flags);
5000 spin_unlock_irqrestore(&info->lock,flags);
5007 /* load the transmit DMA buffer with data
5009 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5011 unsigned short copy_count;
5014 SCADESC_EX *desc_ex;
5016 if ( debug_level >= DEBUG_LEVEL_DATA )
5017 trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
5019 /* Copy source buffer to one or more DMA buffers, starting with
5020 * the first transmit dma buffer.
5024 copy_count = min_t(unsigned int, count, SCABUFSIZE);
5026 desc = &info->tx_buf_list[i];
5027 desc_ex = &info->tx_buf_list_ex[i];
5029 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5031 desc->length = copy_count;
5035 count -= copy_count;
5041 if (i >= info->tx_buf_count)
5045 info->tx_buf_list[i].status = 0x81; /* set EOM and EOT status */
5046 info->last_tx_buf = ++i;
5049 static bool register_test(SLMP_INFO *info)
5051 static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5052 static unsigned int count = ARRAY_SIZE(testval);
5055 unsigned long flags;
5057 spin_lock_irqsave(&info->lock,flags);
5060 /* assume failure */
5061 info->init_error = DiagStatus_AddressFailure;
5063 /* Write bit patterns to various registers but do it out of */
5064 /* sync, then read back and verify values. */
5066 for (i = 0 ; i < count ; i++) {
5067 write_reg(info, TMC, testval[i]);
5068 write_reg(info, IDL, testval[(i+1)%count]);
5069 write_reg(info, SA0, testval[(i+2)%count]);
5070 write_reg(info, SA1, testval[(i+3)%count]);
5072 if ( (read_reg(info, TMC) != testval[i]) ||
5073 (read_reg(info, IDL) != testval[(i+1)%count]) ||
5074 (read_reg(info, SA0) != testval[(i+2)%count]) ||
5075 (read_reg(info, SA1) != testval[(i+3)%count]) )
5083 spin_unlock_irqrestore(&info->lock,flags);
5088 static bool irq_test(SLMP_INFO *info)
5090 unsigned long timeout;
5091 unsigned long flags;
5093 unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5095 spin_lock_irqsave(&info->lock,flags);
5098 /* assume failure */
5099 info->init_error = DiagStatus_IrqFailure;
5100 info->irq_occurred = false;
5102 /* setup timer0 on SCA0 to interrupt */
5104 /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5105 write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5107 write_reg(info, (unsigned char)(timer + TEPR), 0); /* timer expand prescale */
5108 write_reg16(info, (unsigned char)(timer + TCONR), 1); /* timer constant */
5111 /* TMCS, Timer Control/Status Register
5113 * 07 CMF, Compare match flag (read only) 1=match
5114 * 06 ECMI, CMF Interrupt Enable: 1=enabled
5115 * 05 Reserved, must be 0
5116 * 04 TME, Timer Enable
5117 * 03..00 Reserved, must be 0
5121 write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5123 spin_unlock_irqrestore(&info->lock,flags);
5126 while( timeout-- && !info->irq_occurred ) {
5127 msleep_interruptible(10);
5130 spin_lock_irqsave(&info->lock,flags);
5132 spin_unlock_irqrestore(&info->lock,flags);
5134 return info->irq_occurred;
5137 /* initialize individual SCA device (2 ports)
5139 static bool sca_init(SLMP_INFO *info)
5141 /* set wait controller to single mem partition (low), no wait states */
5142 write_reg(info, PABR0, 0); /* wait controller addr boundary 0 */
5143 write_reg(info, PABR1, 0); /* wait controller addr boundary 1 */
5144 write_reg(info, WCRL, 0); /* wait controller low range */
5145 write_reg(info, WCRM, 0); /* wait controller mid range */
5146 write_reg(info, WCRH, 0); /* wait controller high range */
5148 /* DPCR, DMA Priority Control
5150 * 07..05 Not used, must be 0
5151 * 04 BRC, bus release condition: 0=all transfers complete
5152 * 03 CCC, channel change condition: 0=every cycle
5153 * 02..00 PR<2..0>, priority 100=round robin
5157 write_reg(info, DPCR, dma_priority);
5159 /* DMA Master Enable, BIT7: 1=enable all channels */
5160 write_reg(info, DMER, 0x80);
5162 /* enable all interrupt classes */
5163 write_reg(info, IER0, 0xff); /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5164 write_reg(info, IER1, 0xff); /* DMIB,DMIA (channels 0-3) */
5165 write_reg(info, IER2, 0xf0); /* TIRQ (timers 0-3) */
5167 /* ITCR, interrupt control register
5168 * 07 IPC, interrupt priority, 0=MSCI->DMA
5169 * 06..05 IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5170 * 04 VOS, Vector Output, 0=unmodified vector
5171 * 03..00 Reserved, must be 0
5173 write_reg(info, ITCR, 0);
5178 /* initialize adapter hardware
5180 static bool init_adapter(SLMP_INFO *info)
5184 /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5185 volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5188 info->misc_ctrl_value |= BIT30;
5189 *MiscCtrl = info->misc_ctrl_value;
5192 * Force at least 170ns delay before clearing
5193 * reset bit. Each read from LCR takes at least
5194 * 30ns so 10 times for 300ns to be safe.
5197 readval = *MiscCtrl;
5199 info->misc_ctrl_value &= ~BIT30;
5200 *MiscCtrl = info->misc_ctrl_value;
5202 /* init control reg (all DTRs off, all clksel=input) */
5203 info->ctrlreg_value = 0xaa;
5204 write_control_reg(info);
5207 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5208 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5210 switch(read_ahead_count)
5213 lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5216 lcr1_brdr_value |= BIT5 + BIT4;
5219 lcr1_brdr_value |= BIT5 + BIT3;
5222 lcr1_brdr_value |= BIT5;
5226 *LCR1BRDR = lcr1_brdr_value;
5227 *MiscCtrl = misc_ctrl_value;
5230 sca_init(info->port_array[0]);
5231 sca_init(info->port_array[2]);
5236 /* Loopback an HDLC frame to test the hardware
5237 * interrupt and DMA functions.
5239 static bool loopback_test(SLMP_INFO *info)
5241 #define TESTFRAMESIZE 20
5243 unsigned long timeout;
5244 u16 count = TESTFRAMESIZE;
5245 unsigned char buf[TESTFRAMESIZE];
5247 unsigned long flags;
5249 struct tty_struct *oldtty = info->port.tty;
5250 u32 speed = info->params.clock_speed;
5252 info->params.clock_speed = 3686400;
5253 info->port.tty = NULL;
5255 /* assume failure */
5256 info->init_error = DiagStatus_DmaFailure;
5258 /* build and send transmit frame */
5259 for (count = 0; count < TESTFRAMESIZE;++count)
5260 buf[count] = (unsigned char)count;
5262 memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5264 /* program hardware for HDLC and enabled receiver */
5265 spin_lock_irqsave(&info->lock,flags);
5267 enable_loopback(info,1);
5269 info->tx_count = count;
5270 tx_load_dma_buffer(info,buf,count);
5272 spin_unlock_irqrestore(&info->lock,flags);
5274 /* wait for receive complete */
5275 /* Set a timeout for waiting for interrupt. */
5276 for ( timeout = 100; timeout; --timeout ) {
5277 msleep_interruptible(10);
5279 if (rx_get_frame(info)) {
5285 /* verify received frame length and contents */
5287 ( info->tmp_rx_buf_count != count ||
5288 memcmp(buf, info->tmp_rx_buf,count))) {
5292 spin_lock_irqsave(&info->lock,flags);
5293 reset_adapter(info);
5294 spin_unlock_irqrestore(&info->lock,flags);
5296 info->params.clock_speed = speed;
5297 info->port.tty = oldtty;
5302 /* Perform diagnostics on hardware
5304 static int adapter_test( SLMP_INFO *info )
5306 unsigned long flags;
5307 if ( debug_level >= DEBUG_LEVEL_INFO )
5308 printk( "%s(%d):Testing device %s\n",
5309 __FILE__,__LINE__,info->device_name );
5311 spin_lock_irqsave(&info->lock,flags);
5313 spin_unlock_irqrestore(&info->lock,flags);
5315 info->port_array[0]->port_count = 0;
5317 if ( register_test(info->port_array[0]) &&
5318 register_test(info->port_array[1])) {
5320 info->port_array[0]->port_count = 2;
5322 if ( register_test(info->port_array[2]) &&
5323 register_test(info->port_array[3]) )
5324 info->port_array[0]->port_count += 2;
5327 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5328 __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5332 if ( !irq_test(info->port_array[0]) ||
5333 !irq_test(info->port_array[1]) ||
5334 (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5335 (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5336 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5337 __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5341 if (!loopback_test(info->port_array[0]) ||
5342 !loopback_test(info->port_array[1]) ||
5343 (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5344 (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5345 printk( "%s(%d):DMA test failure for device %s\n",
5346 __FILE__,__LINE__,info->device_name);
5350 if ( debug_level >= DEBUG_LEVEL_INFO )
5351 printk( "%s(%d):device %s passed diagnostics\n",
5352 __FILE__,__LINE__,info->device_name );
5354 info->port_array[0]->init_error = 0;
5355 info->port_array[1]->init_error = 0;
5356 if ( info->port_count > 2 ) {
5357 info->port_array[2]->init_error = 0;
5358 info->port_array[3]->init_error = 0;
5364 /* Test the shared memory on a PCI adapter.
5366 static bool memory_test(SLMP_INFO *info)
5368 static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5369 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5370 unsigned long count = ARRAY_SIZE(testval);
5372 unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5373 unsigned long * addr = (unsigned long *)info->memory_base;
5375 /* Test data lines with test pattern at one location. */
5377 for ( i = 0 ; i < count ; i++ ) {
5379 if ( *addr != testval[i] )
5383 /* Test address lines with incrementing pattern over */
5384 /* entire address range. */
5386 for ( i = 0 ; i < limit ; i++ ) {
5391 addr = (unsigned long *)info->memory_base;
5393 for ( i = 0 ; i < limit ; i++ ) {
5394 if ( *addr != i * 4 )
5399 memset( info->memory_base, 0, SCA_MEM_SIZE );
5403 /* Load data into PCI adapter shared memory.
5405 * The PCI9050 releases control of the local bus
5406 * after completing the current read or write operation.
5408 * While the PCI9050 write FIFO not empty, the
5409 * PCI9050 treats all of the writes as a single transaction
5410 * and does not release the bus. This causes DMA latency problems
5411 * at high speeds when copying large data blocks to the shared memory.
5413 * This function breaks a write into multiple transations by
5414 * interleaving a read which flushes the write FIFO and 'completes'
5415 * the write transation. This allows any pending DMA request to gain control
5416 * of the local bus in a timely fasion.
5418 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5420 /* A load interval of 16 allows for 4 32-bit writes at */
5421 /* 136ns each for a maximum latency of 542ns on the local bus.*/
5423 unsigned short interval = count / sca_pci_load_interval;
5426 for ( i = 0 ; i < interval ; i++ )
5428 memcpy(dest, src, sca_pci_load_interval);
5429 read_status_reg(info);
5430 dest += sca_pci_load_interval;
5431 src += sca_pci_load_interval;
5434 memcpy(dest, src, count % sca_pci_load_interval);
5437 static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5442 printk("%s tx data:\n",info->device_name);
5444 printk("%s rx data:\n",info->device_name);
5452 for(i=0;i<linecount;i++)
5453 printk("%02X ",(unsigned char)data[i]);
5456 for(i=0;i<linecount;i++) {
5457 if (data[i]>=040 && data[i]<=0176)
5458 printk("%c",data[i]);
5467 } /* end of trace_block() */
5469 /* called when HDLC frame times out
5470 * update stats and do tx completion processing
5472 static void tx_timeout(unsigned long context)
5474 SLMP_INFO *info = (SLMP_INFO*)context;
5475 unsigned long flags;
5477 if ( debug_level >= DEBUG_LEVEL_INFO )
5478 printk( "%s(%d):%s tx_timeout()\n",
5479 __FILE__,__LINE__,info->device_name);
5480 if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5481 info->icount.txtimeout++;
5483 spin_lock_irqsave(&info->lock,flags);
5484 info->tx_active = false;
5485 info->tx_count = info->tx_put = info->tx_get = 0;
5487 spin_unlock_irqrestore(&info->lock,flags);
5489 #if SYNCLINK_GENERIC_HDLC
5491 hdlcdev_tx_done(info);
5497 /* called to periodically check the DSR/RI modem signal input status
5499 static void status_timeout(unsigned long context)
5502 SLMP_INFO *info = (SLMP_INFO*)context;
5503 unsigned long flags;
5504 unsigned char delta;
5507 spin_lock_irqsave(&info->lock,flags);
5509 spin_unlock_irqrestore(&info->lock,flags);
5511 /* check for DSR/RI state change */
5513 delta = info->old_signals ^ info->serial_signals;
5514 info->old_signals = info->serial_signals;
5516 if (delta & SerialSignal_DSR)
5517 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5519 if (delta & SerialSignal_RI)
5520 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5522 if (delta & SerialSignal_DCD)
5523 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5525 if (delta & SerialSignal_CTS)
5526 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5529 isr_io_pin(info,status);
5531 mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5535 /* Register Access Routines -
5536 * All registers are memory mapped
5538 #define CALC_REGADDR() \
5539 unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5540 if (info->port_num > 1) \
5541 RegAddr += 256; /* port 0-1 SCA0, 2-3 SCA1 */ \
5542 if ( info->port_num & 1) { \
5544 RegAddr += 0x40; /* DMA access */ \
5545 else if (Addr > 0x1f && Addr < 0x60) \
5546 RegAddr += 0x20; /* MSCI access */ \
5550 static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5555 static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5561 static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5564 return *((u16 *)RegAddr);
5567 static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5570 *((u16 *)RegAddr) = Value;
5573 static unsigned char read_status_reg(SLMP_INFO * info)
5575 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5579 static void write_control_reg(SLMP_INFO * info)
5581 unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5582 *RegAddr = info->port_array[0]->ctrlreg_value;
5586 static int __devinit synclinkmp_init_one (struct pci_dev *dev,
5587 const struct pci_device_id *ent)
5589 if (pci_enable_device(dev)) {
5590 printk("error enabling pci device %p\n", dev);
5593 device_init( ++synclinkmp_adapter_count, dev );
5597 static void __devexit synclinkmp_remove_one (struct pci_dev *dev)