2 * Copyright (C) 1991, 1992 Linus Torvalds
6 * 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles
7 * or rs-channels. It also implements echoing, cooked mode etc.
9 * Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0.
11 * Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the
12 * tty_struct and tty_queue structures. Previously there was an array
13 * of 256 tty_struct's which was statically allocated, and the
14 * tty_queue structures were allocated at boot time. Both are now
15 * dynamically allocated only when the tty is open.
17 * Also restructured routines so that there is more of a separation
18 * between the high-level tty routines (tty_io.c and tty_ioctl.c) and
19 * the low-level tty routines (serial.c, pty.c, console.c). This
20 * makes for cleaner and more compact code. -TYT, 9/17/92
22 * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
23 * which can be dynamically activated and de-activated by the line
24 * discipline handling modules (like SLIP).
26 * NOTE: pay no attention to the line discipline code (yet); its
27 * interface is still subject to change in this version...
30 * Added functionality to the OPOST tty handling. No delays, but all
31 * other bits should be there.
32 * -- Nick Holloway <alfie@dcs.warwick.ac.uk>, 27th May 1993.
34 * Rewrote canonical mode and added more termios flags.
35 * -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94
37 * Reorganized FASYNC support so mouse code can share it.
38 * -- ctm@ardi.com, 9Sep95
40 * New TIOCLINUX variants added.
41 * -- mj@k332.feld.cvut.cz, 19-Nov-95
43 * Restrict vt switching via ioctl()
44 * -- grif@cs.ucr.edu, 5-Dec-95
46 * Move console and virtual terminal code to more appropriate files,
47 * implement CONFIG_VT and generalize console device interface.
48 * -- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
50 * Rewrote tty_init_dev and tty_release_dev to eliminate races.
51 * -- Bill Hawes <whawes@star.net>, June 97
53 * Added devfs support.
54 * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 13-Jan-1998
56 * Added support for a Unix98-style ptmx device.
57 * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
59 * Reduced memory usage for older ARM systems
60 * -- Russell King <rmk@arm.linux.org.uk>
62 * Move do_SAK() into process context. Less stack use in devfs functions.
63 * alloc_tty_struct() always uses kmalloc()
64 * -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
67 #include <linux/types.h>
68 #include <linux/major.h>
69 #include <linux/errno.h>
70 #include <linux/signal.h>
71 #include <linux/fcntl.h>
72 #include <linux/sched.h>
73 #include <linux/interrupt.h>
74 #include <linux/tty.h>
75 #include <linux/tty_driver.h>
76 #include <linux/tty_flip.h>
77 #include <linux/devpts_fs.h>
78 #include <linux/file.h>
79 #include <linux/fdtable.h>
80 #include <linux/console.h>
81 #include <linux/timer.h>
82 #include <linux/ctype.h>
85 #include <linux/string.h>
86 #include <linux/slab.h>
87 #include <linux/poll.h>
88 #include <linux/proc_fs.h>
89 #include <linux/init.h>
90 #include <linux/module.h>
91 #include <linux/device.h>
92 #include <linux/wait.h>
93 #include <linux/bitops.h>
94 #include <linux/delay.h>
95 #include <linux/seq_file.h>
96 #include <linux/serial.h>
97 #include <linux/ratelimit.h>
99 #include <linux/uaccess.h>
101 #include <linux/kbd_kern.h>
102 #include <linux/vt_kern.h>
103 #include <linux/selection.h>
105 #include <linux/kmod.h>
106 #include <linux/nsproxy.h>
108 #undef TTY_DEBUG_HANGUP
110 #define TTY_PARANOIA_CHECK 1
111 #define CHECK_TTY_COUNT 1
113 struct ktermios tty_std_termios = { /* for the benefit of tty drivers */
114 .c_iflag = ICRNL | IXON,
115 .c_oflag = OPOST | ONLCR,
116 .c_cflag = B38400 | CS8 | CREAD | HUPCL,
117 .c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
118 ECHOCTL | ECHOKE | IEXTEN,
124 EXPORT_SYMBOL(tty_std_termios);
126 /* This list gets poked at by procfs and various bits of boot up code. This
127 could do with some rationalisation such as pulling the tty proc function
130 LIST_HEAD(tty_drivers); /* linked list of tty drivers */
132 /* Mutex to protect creating and releasing a tty. This is shared with
133 vt.c for deeply disgusting hack reasons */
134 DEFINE_MUTEX(tty_mutex);
135 EXPORT_SYMBOL(tty_mutex);
137 /* Spinlock to protect the tty->tty_files list */
138 DEFINE_SPINLOCK(tty_files_lock);
140 static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
141 static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
142 ssize_t redirected_tty_write(struct file *, const char __user *,
144 static unsigned int tty_poll(struct file *, poll_table *);
145 static int tty_open(struct inode *, struct file *);
146 long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
148 static long tty_compat_ioctl(struct file *file, unsigned int cmd,
151 #define tty_compat_ioctl NULL
153 static int __tty_fasync(int fd, struct file *filp, int on);
154 static int tty_fasync(int fd, struct file *filp, int on);
155 static void release_tty(struct tty_struct *tty, int idx);
156 static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
157 static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
160 * alloc_tty_struct - allocate a tty object
162 * Return a new empty tty structure. The data fields have not
163 * been initialized in any way but has been zeroed
168 struct tty_struct *alloc_tty_struct(void)
170 return kzalloc(sizeof(struct tty_struct), GFP_KERNEL);
174 * free_tty_struct - free a disused tty
175 * @tty: tty struct to free
177 * Free the write buffers, tty queue and tty memory itself.
179 * Locking: none. Must be called after tty is definitely unused
182 void free_tty_struct(struct tty_struct *tty)
187 put_device(tty->dev);
188 kfree(tty->write_buf);
189 tty->magic = 0xDEADDEAD;
193 static inline struct tty_struct *file_tty(struct file *file)
195 return ((struct tty_file_private *)file->private_data)->tty;
198 int tty_alloc_file(struct file *file)
200 struct tty_file_private *priv;
202 priv = kmalloc(sizeof(*priv), GFP_KERNEL);
206 file->private_data = priv;
211 /* Associate a new file with the tty structure */
212 void tty_add_file(struct tty_struct *tty, struct file *file)
214 struct tty_file_private *priv = file->private_data;
219 spin_lock(&tty_files_lock);
220 list_add(&priv->list, &tty->tty_files);
221 spin_unlock(&tty_files_lock);
225 * tty_free_file - free file->private_data
227 * This shall be used only for fail path handling when tty_add_file was not
230 void tty_free_file(struct file *file)
232 struct tty_file_private *priv = file->private_data;
234 file->private_data = NULL;
238 /* Delete file from its tty */
239 static void tty_del_file(struct file *file)
241 struct tty_file_private *priv = file->private_data;
243 spin_lock(&tty_files_lock);
244 list_del(&priv->list);
245 spin_unlock(&tty_files_lock);
250 #define TTY_NUMBER(tty) ((tty)->index + (tty)->driver->name_base)
253 * tty_name - return tty naming
254 * @tty: tty structure
255 * @buf: buffer for output
257 * Convert a tty structure into a name. The name reflects the kernel
258 * naming policy and if udev is in use may not reflect user space
263 char *tty_name(struct tty_struct *tty, char *buf)
265 if (!tty) /* Hmm. NULL pointer. That's fun. */
266 strcpy(buf, "NULL tty");
268 strcpy(buf, tty->name);
272 EXPORT_SYMBOL(tty_name);
274 int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
277 #ifdef TTY_PARANOIA_CHECK
280 "null TTY for (%d:%d) in %s\n",
281 imajor(inode), iminor(inode), routine);
284 if (tty->magic != TTY_MAGIC) {
286 "bad magic number for tty struct (%d:%d) in %s\n",
287 imajor(inode), iminor(inode), routine);
294 static int check_tty_count(struct tty_struct *tty, const char *routine)
296 #ifdef CHECK_TTY_COUNT
300 spin_lock(&tty_files_lock);
301 list_for_each(p, &tty->tty_files) {
304 spin_unlock(&tty_files_lock);
305 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
306 tty->driver->subtype == PTY_TYPE_SLAVE &&
307 tty->link && tty->link->count)
309 if (tty->count != count) {
310 printk(KERN_WARNING "Warning: dev (%s) tty->count(%d) "
311 "!= #fd's(%d) in %s\n",
312 tty->name, tty->count, count, routine);
320 * get_tty_driver - find device of a tty
321 * @dev_t: device identifier
322 * @index: returns the index of the tty
324 * This routine returns a tty driver structure, given a device number
325 * and also passes back the index number.
327 * Locking: caller must hold tty_mutex
330 static struct tty_driver *get_tty_driver(dev_t device, int *index)
332 struct tty_driver *p;
334 list_for_each_entry(p, &tty_drivers, tty_drivers) {
335 dev_t base = MKDEV(p->major, p->minor_start);
336 if (device < base || device >= base + p->num)
338 *index = device - base;
339 return tty_driver_kref_get(p);
344 #ifdef CONFIG_CONSOLE_POLL
347 * tty_find_polling_driver - find device of a polled tty
348 * @name: name string to match
349 * @line: pointer to resulting tty line nr
351 * This routine returns a tty driver structure, given a name
352 * and the condition that the tty driver is capable of polled
355 struct tty_driver *tty_find_polling_driver(char *name, int *line)
357 struct tty_driver *p, *res = NULL;
362 for (str = name; *str; str++)
363 if ((*str >= '0' && *str <= '9') || *str == ',')
369 tty_line = simple_strtoul(str, &str, 10);
371 mutex_lock(&tty_mutex);
372 /* Search through the tty devices to look for a match */
373 list_for_each_entry(p, &tty_drivers, tty_drivers) {
374 if (strncmp(name, p->name, len) != 0)
382 if (tty_line >= 0 && tty_line < p->num && p->ops &&
383 p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
384 res = tty_driver_kref_get(p);
389 mutex_unlock(&tty_mutex);
393 EXPORT_SYMBOL_GPL(tty_find_polling_driver);
397 * tty_check_change - check for POSIX terminal changes
400 * If we try to write to, or set the state of, a terminal and we're
401 * not in the foreground, send a SIGTTOU. If the signal is blocked or
402 * ignored, go ahead and perform the operation. (POSIX 7.2)
407 int tty_check_change(struct tty_struct *tty)
412 if (current->signal->tty != tty)
415 spin_lock_irqsave(&tty->ctrl_lock, flags);
418 printk(KERN_WARNING "tty_check_change: tty->pgrp == NULL!\n");
421 if (task_pgrp(current) == tty->pgrp)
423 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
424 if (is_ignored(SIGTTOU))
426 if (is_current_pgrp_orphaned()) {
430 kill_pgrp(task_pgrp(current), SIGTTOU, 1);
431 set_thread_flag(TIF_SIGPENDING);
436 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
440 EXPORT_SYMBOL(tty_check_change);
442 static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
443 size_t count, loff_t *ppos)
448 static ssize_t hung_up_tty_write(struct file *file, const char __user *buf,
449 size_t count, loff_t *ppos)
454 /* No kernel lock held - none needed ;) */
455 static unsigned int hung_up_tty_poll(struct file *filp, poll_table *wait)
457 return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
460 static long hung_up_tty_ioctl(struct file *file, unsigned int cmd,
463 return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
466 static long hung_up_tty_compat_ioctl(struct file *file,
467 unsigned int cmd, unsigned long arg)
469 return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
472 static const struct file_operations tty_fops = {
477 .unlocked_ioctl = tty_ioctl,
478 .compat_ioctl = tty_compat_ioctl,
480 .release = tty_release,
481 .fasync = tty_fasync,
484 static const struct file_operations console_fops = {
487 .write = redirected_tty_write,
489 .unlocked_ioctl = tty_ioctl,
490 .compat_ioctl = tty_compat_ioctl,
492 .release = tty_release,
493 .fasync = tty_fasync,
496 static const struct file_operations hung_up_tty_fops = {
498 .read = hung_up_tty_read,
499 .write = hung_up_tty_write,
500 .poll = hung_up_tty_poll,
501 .unlocked_ioctl = hung_up_tty_ioctl,
502 .compat_ioctl = hung_up_tty_compat_ioctl,
503 .release = tty_release,
506 static DEFINE_SPINLOCK(redirect_lock);
507 static struct file *redirect;
510 * tty_wakeup - request more data
513 * Internal and external helper for wakeups of tty. This function
514 * informs the line discipline if present that the driver is ready
515 * to receive more output data.
518 void tty_wakeup(struct tty_struct *tty)
520 struct tty_ldisc *ld;
522 if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
523 ld = tty_ldisc_ref(tty);
525 if (ld->ops->write_wakeup)
526 ld->ops->write_wakeup(tty);
530 wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
533 EXPORT_SYMBOL_GPL(tty_wakeup);
536 * __tty_hangup - actual handler for hangup events
539 * This can be called by a "kworker" kernel thread. That is process
540 * synchronous but doesn't hold any locks, so we need to make sure we
541 * have the appropriate locks for what we're doing.
543 * The hangup event clears any pending redirections onto the hung up
544 * device. It ensures future writes will error and it does the needed
545 * line discipline hangup and signal delivery. The tty object itself
550 * redirect lock for undoing redirection
551 * file list lock for manipulating list of ttys
552 * tty_ldisc_lock from called functions
553 * termios_mutex resetting termios data
554 * tasklist_lock to walk task list for hangup event
555 * ->siglock to protect ->signal/->sighand
557 static void __tty_hangup(struct tty_struct *tty)
559 struct file *cons_filp = NULL;
560 struct file *filp, *f = NULL;
561 struct task_struct *p;
562 struct tty_file_private *priv;
563 int closecount = 0, n;
571 spin_lock(&redirect_lock);
572 if (redirect && file_tty(redirect) == tty) {
576 spin_unlock(&redirect_lock);
580 /* some functions below drop BTM, so we need this bit */
581 set_bit(TTY_HUPPING, &tty->flags);
583 /* inuse_filps is protected by the single tty lock,
584 this really needs to change if we want to flush the
585 workqueue with the lock held */
586 check_tty_count(tty, "tty_hangup");
588 spin_lock(&tty_files_lock);
589 /* This breaks for file handles being sent over AF_UNIX sockets ? */
590 list_for_each_entry(priv, &tty->tty_files, list) {
592 if (filp->f_op->write == redirected_tty_write)
594 if (filp->f_op->write != tty_write)
597 __tty_fasync(-1, filp, 0); /* can't block */
598 filp->f_op = &hung_up_tty_fops;
600 spin_unlock(&tty_files_lock);
603 * it drops BTM and thus races with reopen
604 * we protect the race by TTY_HUPPING
606 tty_ldisc_hangup(tty);
608 read_lock(&tasklist_lock);
610 do_each_pid_task(tty->session, PIDTYPE_SID, p) {
611 spin_lock_irq(&p->sighand->siglock);
612 if (p->signal->tty == tty) {
613 p->signal->tty = NULL;
614 /* We defer the dereferences outside fo
618 if (!p->signal->leader) {
619 spin_unlock_irq(&p->sighand->siglock);
622 __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
623 __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
624 put_pid(p->signal->tty_old_pgrp); /* A noop */
625 spin_lock_irqsave(&tty->ctrl_lock, flags);
627 p->signal->tty_old_pgrp = get_pid(tty->pgrp);
628 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
629 spin_unlock_irq(&p->sighand->siglock);
630 } while_each_pid_task(tty->session, PIDTYPE_SID, p);
632 read_unlock(&tasklist_lock);
634 spin_lock_irqsave(&tty->ctrl_lock, flags);
635 clear_bit(TTY_THROTTLED, &tty->flags);
636 clear_bit(TTY_PUSH, &tty->flags);
637 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
638 put_pid(tty->session);
642 tty->ctrl_status = 0;
643 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
645 /* Account for the p->signal references we killed */
650 * If one of the devices matches a console pointer, we
651 * cannot just call hangup() because that will cause
652 * tty->count and state->count to go out of sync.
653 * So we just call close() the right number of times.
657 for (n = 0; n < closecount; n++)
658 tty->ops->close(tty, cons_filp);
659 } else if (tty->ops->hangup)
660 (tty->ops->hangup)(tty);
662 * We don't want to have driver/ldisc interactions beyond
663 * the ones we did here. The driver layer expects no
664 * calls after ->hangup() from the ldisc side. However we
665 * can't yet guarantee all that.
667 set_bit(TTY_HUPPED, &tty->flags);
668 clear_bit(TTY_HUPPING, &tty->flags);
669 tty_ldisc_enable(tty);
677 static void do_tty_hangup(struct work_struct *work)
679 struct tty_struct *tty =
680 container_of(work, struct tty_struct, hangup_work);
686 * tty_hangup - trigger a hangup event
687 * @tty: tty to hangup
689 * A carrier loss (virtual or otherwise) has occurred on this like
690 * schedule a hangup sequence to run after this event.
693 void tty_hangup(struct tty_struct *tty)
695 #ifdef TTY_DEBUG_HANGUP
697 printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf));
699 schedule_work(&tty->hangup_work);
702 EXPORT_SYMBOL(tty_hangup);
705 * tty_vhangup - process vhangup
706 * @tty: tty to hangup
708 * The user has asked via system call for the terminal to be hung up.
709 * We do this synchronously so that when the syscall returns the process
710 * is complete. That guarantee is necessary for security reasons.
713 void tty_vhangup(struct tty_struct *tty)
715 #ifdef TTY_DEBUG_HANGUP
718 printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
723 EXPORT_SYMBOL(tty_vhangup);
727 * tty_vhangup_self - process vhangup for own ctty
729 * Perform a vhangup on the current controlling tty
732 void tty_vhangup_self(void)
734 struct tty_struct *tty;
736 tty = get_current_tty();
744 * tty_hung_up_p - was tty hung up
745 * @filp: file pointer of tty
747 * Return true if the tty has been subject to a vhangup or a carrier
751 int tty_hung_up_p(struct file *filp)
753 return (filp->f_op == &hung_up_tty_fops);
756 EXPORT_SYMBOL(tty_hung_up_p);
758 static void session_clear_tty(struct pid *session)
760 struct task_struct *p;
761 do_each_pid_task(session, PIDTYPE_SID, p) {
763 } while_each_pid_task(session, PIDTYPE_SID, p);
767 * disassociate_ctty - disconnect controlling tty
768 * @on_exit: true if exiting so need to "hang up" the session
770 * This function is typically called only by the session leader, when
771 * it wants to disassociate itself from its controlling tty.
773 * It performs the following functions:
774 * (1) Sends a SIGHUP and SIGCONT to the foreground process group
775 * (2) Clears the tty from being controlling the session
776 * (3) Clears the controlling tty for all processes in the
779 * The argument on_exit is set to 1 if called when a process is
780 * exiting; it is 0 if called by the ioctl TIOCNOTTY.
783 * BTM is taken for hysterical raisins, and held when
784 * called from no_tty().
785 * tty_mutex is taken to protect tty
786 * ->siglock is taken to protect ->signal/->sighand
787 * tasklist_lock is taken to walk process list for sessions
788 * ->siglock is taken to protect ->signal/->sighand
791 void disassociate_ctty(int on_exit)
793 struct tty_struct *tty;
795 if (!current->signal->leader)
798 tty = get_current_tty();
800 struct pid *tty_pgrp = get_pid(tty->pgrp);
802 if (tty->driver->type != TTY_DRIVER_TYPE_PTY)
807 kill_pgrp(tty_pgrp, SIGHUP, on_exit);
809 kill_pgrp(tty_pgrp, SIGCONT, on_exit);
812 } else if (on_exit) {
813 struct pid *old_pgrp;
814 spin_lock_irq(¤t->sighand->siglock);
815 old_pgrp = current->signal->tty_old_pgrp;
816 current->signal->tty_old_pgrp = NULL;
817 spin_unlock_irq(¤t->sighand->siglock);
819 kill_pgrp(old_pgrp, SIGHUP, on_exit);
820 kill_pgrp(old_pgrp, SIGCONT, on_exit);
826 spin_lock_irq(¤t->sighand->siglock);
827 put_pid(current->signal->tty_old_pgrp);
828 current->signal->tty_old_pgrp = NULL;
829 spin_unlock_irq(¤t->sighand->siglock);
831 tty = get_current_tty();
834 spin_lock_irqsave(&tty->ctrl_lock, flags);
835 put_pid(tty->session);
839 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
842 #ifdef TTY_DEBUG_HANGUP
843 printk(KERN_DEBUG "error attempted to write to tty [0x%p]"
848 /* Now clear signal->tty under the lock */
849 read_lock(&tasklist_lock);
850 session_clear_tty(task_session(current));
851 read_unlock(&tasklist_lock);
856 * no_tty - Ensure the current process does not have a controlling tty
860 /* FIXME: Review locking here. The tty_lock never covered any race
861 between a new association and proc_clear_tty but possible we need
862 to protect against this anyway */
863 struct task_struct *tsk = current;
864 disassociate_ctty(0);
870 * stop_tty - propagate flow control
873 * Perform flow control to the driver. For PTY/TTY pairs we
874 * must also propagate the TIOCKPKT status. May be called
875 * on an already stopped device and will not re-call the driver
878 * This functionality is used by both the line disciplines for
879 * halting incoming flow and by the driver. It may therefore be
880 * called from any context, may be under the tty atomic_write_lock
884 * Uses the tty control lock internally
887 void stop_tty(struct tty_struct *tty)
890 spin_lock_irqsave(&tty->ctrl_lock, flags);
892 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
896 if (tty->link && tty->link->packet) {
897 tty->ctrl_status &= ~TIOCPKT_START;
898 tty->ctrl_status |= TIOCPKT_STOP;
899 wake_up_interruptible_poll(&tty->link->read_wait, POLLIN);
901 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
903 (tty->ops->stop)(tty);
906 EXPORT_SYMBOL(stop_tty);
909 * start_tty - propagate flow control
912 * Start a tty that has been stopped if at all possible. Perform
913 * any necessary wakeups and propagate the TIOCPKT status. If this
914 * is the tty was previous stopped and is being started then the
915 * driver start method is invoked and the line discipline woken.
921 void start_tty(struct tty_struct *tty)
924 spin_lock_irqsave(&tty->ctrl_lock, flags);
925 if (!tty->stopped || tty->flow_stopped) {
926 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
930 if (tty->link && tty->link->packet) {
931 tty->ctrl_status &= ~TIOCPKT_STOP;
932 tty->ctrl_status |= TIOCPKT_START;
933 wake_up_interruptible_poll(&tty->link->read_wait, POLLIN);
935 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
937 (tty->ops->start)(tty);
938 /* If we have a running line discipline it may need kicking */
942 EXPORT_SYMBOL(start_tty);
945 * tty_read - read method for tty device files
946 * @file: pointer to tty file
948 * @count: size of user buffer
951 * Perform the read system call function on this terminal device. Checks
952 * for hung up devices before calling the line discipline method.
955 * Locks the line discipline internally while needed. Multiple
956 * read calls may be outstanding in parallel.
959 static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
963 struct inode *inode = file->f_path.dentry->d_inode;
964 struct tty_struct *tty = file_tty(file);
965 struct tty_ldisc *ld;
967 if (tty_paranoia_check(tty, inode, "tty_read"))
969 if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
972 /* We want to wait for the line discipline to sort out in this
974 ld = tty_ldisc_ref_wait(tty);
976 i = (ld->ops->read)(tty, file, buf, count);
984 void tty_write_unlock(struct tty_struct *tty)
985 __releases(&tty->atomic_write_lock)
987 mutex_unlock(&tty->atomic_write_lock);
988 wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
991 int tty_write_lock(struct tty_struct *tty, int ndelay)
992 __acquires(&tty->atomic_write_lock)
994 if (!mutex_trylock(&tty->atomic_write_lock)) {
997 if (mutex_lock_interruptible(&tty->atomic_write_lock))
1004 * Split writes up in sane blocksizes to avoid
1005 * denial-of-service type attacks
1007 static inline ssize_t do_tty_write(
1008 ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t),
1009 struct tty_struct *tty,
1011 const char __user *buf,
1014 ssize_t ret, written = 0;
1017 ret = tty_write_lock(tty, file->f_flags & O_NDELAY);
1022 * We chunk up writes into a temporary buffer. This
1023 * simplifies low-level drivers immensely, since they
1024 * don't have locking issues and user mode accesses.
1026 * But if TTY_NO_WRITE_SPLIT is set, we should use a
1029 * The default chunk-size is 2kB, because the NTTY
1030 * layer has problems with bigger chunks. It will
1031 * claim to be able to handle more characters than
1034 * FIXME: This can probably go away now except that 64K chunks
1035 * are too likely to fail unless switched to vmalloc...
1038 if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
1043 /* write_buf/write_cnt is protected by the atomic_write_lock mutex */
1044 if (tty->write_cnt < chunk) {
1045 unsigned char *buf_chunk;
1050 buf_chunk = kmalloc(chunk, GFP_KERNEL);
1055 kfree(tty->write_buf);
1056 tty->write_cnt = chunk;
1057 tty->write_buf = buf_chunk;
1060 /* Do the write .. */
1062 size_t size = count;
1066 if (copy_from_user(tty->write_buf, buf, size))
1068 ret = write(tty, file, tty->write_buf, size);
1077 if (signal_pending(current))
1084 tty_write_unlock(tty);
1089 * tty_write_message - write a message to a certain tty, not just the console.
1090 * @tty: the destination tty_struct
1091 * @msg: the message to write
1093 * This is used for messages that need to be redirected to a specific tty.
1094 * We don't put it into the syslog queue right now maybe in the future if
1097 * We must still hold the BTM and test the CLOSING flag for the moment.
1100 void tty_write_message(struct tty_struct *tty, char *msg)
1103 mutex_lock(&tty->atomic_write_lock);
1105 if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
1107 tty->ops->write(tty, msg, strlen(msg));
1110 tty_write_unlock(tty);
1117 * tty_write - write method for tty device file
1118 * @file: tty file pointer
1119 * @buf: user data to write
1120 * @count: bytes to write
1123 * Write data to a tty device via the line discipline.
1126 * Locks the line discipline as required
1127 * Writes to the tty driver are serialized by the atomic_write_lock
1128 * and are then processed in chunks to the device. The line discipline
1129 * write method will not be invoked in parallel for each device.
1132 static ssize_t tty_write(struct file *file, const char __user *buf,
1133 size_t count, loff_t *ppos)
1135 struct inode *inode = file->f_path.dentry->d_inode;
1136 struct tty_struct *tty = file_tty(file);
1137 struct tty_ldisc *ld;
1140 if (tty_paranoia_check(tty, inode, "tty_write"))
1142 if (!tty || !tty->ops->write ||
1143 (test_bit(TTY_IO_ERROR, &tty->flags)))
1145 /* Short term debug to catch buggy drivers */
1146 if (tty->ops->write_room == NULL)
1147 printk(KERN_ERR "tty driver %s lacks a write_room method.\n",
1149 ld = tty_ldisc_ref_wait(tty);
1150 if (!ld->ops->write)
1153 ret = do_tty_write(ld->ops->write, tty, file, buf, count);
1154 tty_ldisc_deref(ld);
1158 ssize_t redirected_tty_write(struct file *file, const char __user *buf,
1159 size_t count, loff_t *ppos)
1161 struct file *p = NULL;
1163 spin_lock(&redirect_lock);
1165 p = get_file(redirect);
1166 spin_unlock(&redirect_lock);
1170 res = vfs_write(p, buf, count, &p->f_pos);
1174 return tty_write(file, buf, count, ppos);
1177 static char ptychar[] = "pqrstuvwxyzabcde";
1180 * pty_line_name - generate name for a pty
1181 * @driver: the tty driver in use
1182 * @index: the minor number
1183 * @p: output buffer of at least 6 bytes
1185 * Generate a name from a driver reference and write it to the output
1190 static void pty_line_name(struct tty_driver *driver, int index, char *p)
1192 int i = index + driver->name_base;
1193 /* ->name is initialized to "ttyp", but "tty" is expected */
1194 sprintf(p, "%s%c%x",
1195 driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
1196 ptychar[i >> 4 & 0xf], i & 0xf);
1200 * tty_line_name - generate name for a tty
1201 * @driver: the tty driver in use
1202 * @index: the minor number
1203 * @p: output buffer of at least 7 bytes
1205 * Generate a name from a driver reference and write it to the output
1210 static void tty_line_name(struct tty_driver *driver, int index, char *p)
1212 if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
1213 strcpy(p, driver->name);
1215 sprintf(p, "%s%d", driver->name, index + driver->name_base);
1219 * tty_driver_lookup_tty() - find an existing tty, if any
1220 * @driver: the driver for the tty
1221 * @idx: the minor number
1223 * Return the tty, if found or ERR_PTR() otherwise.
1225 * Locking: tty_mutex must be held. If tty is found, the mutex must
1226 * be held until the 'fast-open' is also done. Will change once we
1227 * have refcounting in the driver and per driver locking
1229 static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
1230 struct inode *inode, int idx)
1232 if (driver->ops->lookup)
1233 return driver->ops->lookup(driver, inode, idx);
1235 return driver->ttys[idx];
1239 * tty_init_termios - helper for termios setup
1240 * @tty: the tty to set up
1242 * Initialise the termios structures for this tty. Thus runs under
1243 * the tty_mutex currently so we can be relaxed about ordering.
1246 int tty_init_termios(struct tty_struct *tty)
1248 struct ktermios *tp;
1249 int idx = tty->index;
1251 if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
1252 tty->termios = tty->driver->init_termios;
1254 /* Check for lazy saved data */
1255 tp = tty->driver->termios[idx];
1259 tty->termios = tty->driver->init_termios;
1261 /* Compatibility until drivers always set this */
1262 tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
1263 tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
1266 EXPORT_SYMBOL_GPL(tty_init_termios);
1268 int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty)
1270 int ret = tty_init_termios(tty);
1274 tty_driver_kref_get(driver);
1276 driver->ttys[tty->index] = tty;
1279 EXPORT_SYMBOL_GPL(tty_standard_install);
1282 * tty_driver_install_tty() - install a tty entry in the driver
1283 * @driver: the driver for the tty
1286 * Install a tty object into the driver tables. The tty->index field
1287 * will be set by the time this is called. This method is responsible
1288 * for ensuring any need additional structures are allocated and
1291 * Locking: tty_mutex for now
1293 static int tty_driver_install_tty(struct tty_driver *driver,
1294 struct tty_struct *tty)
1296 return driver->ops->install ? driver->ops->install(driver, tty) :
1297 tty_standard_install(driver, tty);
1301 * tty_driver_remove_tty() - remove a tty from the driver tables
1302 * @driver: the driver for the tty
1303 * @idx: the minor number
1305 * Remvoe a tty object from the driver tables. The tty->index field
1306 * will be set by the time this is called.
1308 * Locking: tty_mutex for now
1310 void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
1312 if (driver->ops->remove)
1313 driver->ops->remove(driver, tty);
1315 driver->ttys[tty->index] = NULL;
1319 * tty_reopen() - fast re-open of an open tty
1320 * @tty - the tty to open
1322 * Return 0 on success, -errno on error.
1324 * Locking: tty_mutex must be held from the time the tty was found
1325 * till this open completes.
1327 static int tty_reopen(struct tty_struct *tty)
1329 struct tty_driver *driver = tty->driver;
1331 if (test_bit(TTY_CLOSING, &tty->flags) ||
1332 test_bit(TTY_HUPPING, &tty->flags) ||
1333 test_bit(TTY_LDISC_CHANGING, &tty->flags))
1336 if (driver->type == TTY_DRIVER_TYPE_PTY &&
1337 driver->subtype == PTY_TYPE_MASTER) {
1339 * special case for PTY masters: only one open permitted,
1340 * and the slave side open count is incremented as well.
1349 mutex_lock(&tty->ldisc_mutex);
1350 WARN_ON(!test_bit(TTY_LDISC, &tty->flags));
1351 mutex_unlock(&tty->ldisc_mutex);
1357 * tty_init_dev - initialise a tty device
1358 * @driver: tty driver we are opening a device on
1359 * @idx: device index
1360 * @ret_tty: returned tty structure
1362 * Prepare a tty device. This may not be a "new" clean device but
1363 * could also be an active device. The pty drivers require special
1364 * handling because of this.
1367 * The function is called under the tty_mutex, which
1368 * protects us from the tty struct or driver itself going away.
1370 * On exit the tty device has the line discipline attached and
1371 * a reference count of 1. If a pair was created for pty/tty use
1372 * and the other was a pty master then it too has a reference count of 1.
1374 * WSH 06/09/97: Rewritten to remove races and properly clean up after a
1375 * failed open. The new code protects the open with a mutex, so it's
1376 * really quite straightforward. The mutex locking can probably be
1377 * relaxed for the (most common) case of reopening a tty.
1380 struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
1382 struct tty_struct *tty;
1386 * First time open is complex, especially for PTY devices.
1387 * This code guarantees that either everything succeeds and the
1388 * TTY is ready for operation, or else the table slots are vacated
1389 * and the allocated memory released. (Except that the termios
1390 * and locked termios may be retained.)
1393 if (!try_module_get(driver->owner))
1394 return ERR_PTR(-ENODEV);
1396 tty = alloc_tty_struct();
1399 goto err_module_put;
1401 initialize_tty_struct(tty, driver, idx);
1404 retval = tty_driver_install_tty(driver, tty);
1406 goto err_deinit_tty;
1409 tty->port = driver->ports[idx];
1411 WARN_RATELIMIT(!tty->port,
1412 "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
1413 __func__, tty->driver->name);
1415 tty->port->itty = tty;
1418 * Structures all installed ... call the ldisc open routines.
1419 * If we fail here just call release_tty to clean up. No need
1420 * to decrement the use counts, as release_tty doesn't care.
1422 retval = tty_ldisc_setup(tty, tty->link);
1424 goto err_release_tty;
1425 /* Return the tty locked so that it cannot vanish under the caller */
1430 deinitialize_tty_struct(tty);
1431 free_tty_struct(tty);
1433 module_put(driver->owner);
1434 return ERR_PTR(retval);
1436 /* call the tty release_tty routine to clean out this slot */
1439 printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
1440 "clearing slot %d\n", idx);
1441 release_tty(tty, idx);
1442 return ERR_PTR(retval);
1445 void tty_free_termios(struct tty_struct *tty)
1447 struct ktermios *tp;
1448 int idx = tty->index;
1450 /* If the port is going to reset then it has no termios to save */
1451 if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
1454 /* Stash the termios data */
1455 tp = tty->driver->termios[idx];
1457 tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
1459 pr_warn("tty: no memory to save termios state.\n");
1462 tty->driver->termios[idx] = tp;
1466 EXPORT_SYMBOL(tty_free_termios);
1470 * release_one_tty - release tty structure memory
1471 * @kref: kref of tty we are obliterating
1473 * Releases memory associated with a tty structure, and clears out the
1474 * driver table slots. This function is called when a device is no longer
1475 * in use. It also gets called when setup of a device fails.
1478 * takes the file list lock internally when working on the list
1479 * of ttys that the driver keeps.
1481 * This method gets called from a work queue so that the driver private
1482 * cleanup ops can sleep (needed for USB at least)
1484 static void release_one_tty(struct work_struct *work)
1486 struct tty_struct *tty =
1487 container_of(work, struct tty_struct, hangup_work);
1488 struct tty_driver *driver = tty->driver;
1490 if (tty->ops->cleanup)
1491 tty->ops->cleanup(tty);
1494 tty_driver_kref_put(driver);
1495 module_put(driver->owner);
1497 spin_lock(&tty_files_lock);
1498 list_del_init(&tty->tty_files);
1499 spin_unlock(&tty_files_lock);
1502 put_pid(tty->session);
1503 free_tty_struct(tty);
1506 static void queue_release_one_tty(struct kref *kref)
1508 struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
1510 /* The hangup queue is now free so we can reuse it rather than
1511 waste a chunk of memory for each port */
1512 INIT_WORK(&tty->hangup_work, release_one_tty);
1513 schedule_work(&tty->hangup_work);
1517 * tty_kref_put - release a tty kref
1520 * Release a reference to a tty device and if need be let the kref
1521 * layer destruct the object for us
1524 void tty_kref_put(struct tty_struct *tty)
1527 kref_put(&tty->kref, queue_release_one_tty);
1529 EXPORT_SYMBOL(tty_kref_put);
1532 * release_tty - release tty structure memory
1534 * Release both @tty and a possible linked partner (think pty pair),
1535 * and decrement the refcount of the backing module.
1539 * takes the file list lock internally when working on the list
1540 * of ttys that the driver keeps.
1543 static void release_tty(struct tty_struct *tty, int idx)
1545 /* This should always be true but check for the moment */
1546 WARN_ON(tty->index != idx);
1547 WARN_ON(!mutex_is_locked(&tty_mutex));
1548 if (tty->ops->shutdown)
1549 tty->ops->shutdown(tty);
1550 tty_free_termios(tty);
1551 tty_driver_remove_tty(tty->driver, tty);
1552 tty->port->itty = NULL;
1555 tty_kref_put(tty->link);
1560 * tty_release_checks - check a tty before real release
1561 * @tty: tty to check
1562 * @o_tty: link of @tty (if any)
1563 * @idx: index of the tty
1565 * Performs some paranoid checking before true release of the @tty.
1566 * This is a no-op unless TTY_PARANOIA_CHECK is defined.
1568 static int tty_release_checks(struct tty_struct *tty, struct tty_struct *o_tty,
1571 #ifdef TTY_PARANOIA_CHECK
1572 if (idx < 0 || idx >= tty->driver->num) {
1573 printk(KERN_DEBUG "%s: bad idx when trying to free (%s)\n",
1574 __func__, tty->name);
1578 /* not much to check for devpts */
1579 if (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)
1582 if (tty != tty->driver->ttys[idx]) {
1583 printk(KERN_DEBUG "%s: driver.table[%d] not tty for (%s)\n",
1584 __func__, idx, tty->name);
1587 if (tty->driver->other) {
1588 if (o_tty != tty->driver->other->ttys[idx]) {
1589 printk(KERN_DEBUG "%s: other->table[%d] not o_tty for (%s)\n",
1590 __func__, idx, tty->name);
1593 if (o_tty->link != tty) {
1594 printk(KERN_DEBUG "%s: bad pty pointers\n", __func__);
1603 * tty_release - vfs callback for close
1604 * @inode: inode of tty
1605 * @filp: file pointer for handle to tty
1607 * Called the last time each file handle is closed that references
1608 * this tty. There may however be several such references.
1611 * Takes bkl. See tty_release_dev
1613 * Even releasing the tty structures is a tricky business.. We have
1614 * to be very careful that the structures are all released at the
1615 * same time, as interrupts might otherwise get the wrong pointers.
1617 * WSH 09/09/97: rewritten to avoid some nasty race conditions that could
1618 * lead to double frees or releasing memory still in use.
1621 int tty_release(struct inode *inode, struct file *filp)
1623 struct tty_struct *tty = file_tty(filp);
1624 struct tty_struct *o_tty;
1625 int pty_master, tty_closing, o_tty_closing, do_sleep;
1629 if (tty_paranoia_check(tty, inode, __func__))
1633 check_tty_count(tty, __func__);
1635 __tty_fasync(-1, filp, 0);
1638 pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
1639 tty->driver->subtype == PTY_TYPE_MASTER);
1640 /* Review: parallel close */
1643 if (tty_release_checks(tty, o_tty, idx)) {
1648 #ifdef TTY_DEBUG_HANGUP
1649 printk(KERN_DEBUG "%s: %s (tty count=%d)...\n", __func__,
1650 tty_name(tty, buf), tty->count);
1653 if (tty->ops->close)
1654 tty->ops->close(tty, filp);
1658 * Sanity check: if tty->count is going to zero, there shouldn't be
1659 * any waiters on tty->read_wait or tty->write_wait. We test the
1660 * wait queues and kick everyone out _before_ actually starting to
1661 * close. This ensures that we won't block while releasing the tty
1664 * The test for the o_tty closing is necessary, since the master and
1665 * slave sides may close in any order. If the slave side closes out
1666 * first, its count will be one, since the master side holds an open.
1667 * Thus this test wouldn't be triggered at the time the slave closes,
1670 * Note that it's possible for the tty to be opened again while we're
1671 * flushing out waiters. By recalculating the closing flags before
1672 * each iteration we avoid any problems.
1675 /* Guard against races with tty->count changes elsewhere and
1676 opens on /dev/tty */
1678 mutex_lock(&tty_mutex);
1679 tty_lock_pair(tty, o_tty);
1680 tty_closing = tty->count <= 1;
1681 o_tty_closing = o_tty &&
1682 (o_tty->count <= (pty_master ? 1 : 0));
1686 if (waitqueue_active(&tty->read_wait)) {
1687 wake_up_poll(&tty->read_wait, POLLIN);
1690 if (waitqueue_active(&tty->write_wait)) {
1691 wake_up_poll(&tty->write_wait, POLLOUT);
1695 if (o_tty_closing) {
1696 if (waitqueue_active(&o_tty->read_wait)) {
1697 wake_up_poll(&o_tty->read_wait, POLLIN);
1700 if (waitqueue_active(&o_tty->write_wait)) {
1701 wake_up_poll(&o_tty->write_wait, POLLOUT);
1708 printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
1709 __func__, tty_name(tty, buf));
1710 tty_unlock_pair(tty, o_tty);
1711 mutex_unlock(&tty_mutex);
1716 * The closing flags are now consistent with the open counts on
1717 * both sides, and we've completed the last operation that could
1718 * block, so it's safe to proceed with closing.
1720 * We must *not* drop the tty_mutex until we ensure that a further
1721 * entry into tty_open can not pick up this tty.
1724 if (--o_tty->count < 0) {
1725 printk(KERN_WARNING "%s: bad pty slave count (%d) for %s\n",
1726 __func__, o_tty->count, tty_name(o_tty, buf));
1730 if (--tty->count < 0) {
1731 printk(KERN_WARNING "%s: bad tty->count (%d) for %s\n",
1732 __func__, tty->count, tty_name(tty, buf));
1737 * We've decremented tty->count, so we need to remove this file
1738 * descriptor off the tty->tty_files list; this serves two
1740 * - check_tty_count sees the correct number of file descriptors
1741 * associated with this tty.
1742 * - do_tty_hangup no longer sees this file descriptor as
1743 * something that needs to be handled for hangups.
1748 * Perform some housekeeping before deciding whether to return.
1750 * Set the TTY_CLOSING flag if this was the last open. In the
1751 * case of a pty we may have to wait around for the other side
1752 * to close, and TTY_CLOSING makes sure we can't be reopened.
1755 set_bit(TTY_CLOSING, &tty->flags);
1757 set_bit(TTY_CLOSING, &o_tty->flags);
1760 * If _either_ side is closing, make sure there aren't any
1761 * processes that still think tty or o_tty is their controlling
1764 if (tty_closing || o_tty_closing) {
1765 read_lock(&tasklist_lock);
1766 session_clear_tty(tty->session);
1768 session_clear_tty(o_tty->session);
1769 read_unlock(&tasklist_lock);
1772 mutex_unlock(&tty_mutex);
1773 tty_unlock_pair(tty, o_tty);
1774 /* At this point the TTY_CLOSING flag should ensure a dead tty
1775 cannot be re-opened by a racing opener */
1777 /* check whether both sides are closing ... */
1778 if (!tty_closing || (o_tty && !o_tty_closing))
1781 #ifdef TTY_DEBUG_HANGUP
1782 printk(KERN_DEBUG "%s: freeing tty structure...\n", __func__);
1785 * Ask the line discipline code to release its structures
1787 tty_ldisc_release(tty, o_tty);
1789 * The release_tty function takes care of the details of clearing
1790 * the slots and preserving the termios structure. The tty_unlock_pair
1791 * should be safe as we keep a kref while the tty is locked (so the
1792 * unlock never unlocks a freed tty).
1794 mutex_lock(&tty_mutex);
1795 release_tty(tty, idx);
1796 mutex_unlock(&tty_mutex);
1802 * tty_open_current_tty - get tty of current task for open
1803 * @device: device number
1804 * @filp: file pointer to tty
1805 * @return: tty of the current task iff @device is /dev/tty
1807 * We cannot return driver and index like for the other nodes because
1808 * devpts will not work then. It expects inodes to be from devpts FS.
1810 * We need to move to returning a refcounted object from all the lookup
1811 * paths including this one.
1813 static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
1815 struct tty_struct *tty;
1817 if (device != MKDEV(TTYAUX_MAJOR, 0))
1820 tty = get_current_tty();
1822 return ERR_PTR(-ENXIO);
1824 filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
1827 /* FIXME: we put a reference and return a TTY! */
1828 /* This is only safe because the caller holds tty_mutex */
1833 * tty_lookup_driver - lookup a tty driver for a given device file
1834 * @device: device number
1835 * @filp: file pointer to tty
1836 * @noctty: set if the device should not become a controlling tty
1837 * @index: index for the device in the @return driver
1838 * @return: driver for this inode (with increased refcount)
1840 * If @return is not erroneous, the caller is responsible to decrement the
1841 * refcount by tty_driver_kref_put.
1843 * Locking: tty_mutex protects get_tty_driver
1845 static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
1846 int *noctty, int *index)
1848 struct tty_driver *driver;
1852 case MKDEV(TTY_MAJOR, 0): {
1853 extern struct tty_driver *console_driver;
1854 driver = tty_driver_kref_get(console_driver);
1855 *index = fg_console;
1860 case MKDEV(TTYAUX_MAJOR, 1): {
1861 struct tty_driver *console_driver = console_device(index);
1862 if (console_driver) {
1863 driver = tty_driver_kref_get(console_driver);
1865 /* Don't let /dev/console block */
1866 filp->f_flags |= O_NONBLOCK;
1871 return ERR_PTR(-ENODEV);
1874 driver = get_tty_driver(device, index);
1876 return ERR_PTR(-ENODEV);
1883 * tty_open - open a tty device
1884 * @inode: inode of device file
1885 * @filp: file pointer to tty
1887 * tty_open and tty_release keep up the tty count that contains the
1888 * number of opens done on a tty. We cannot use the inode-count, as
1889 * different inodes might point to the same tty.
1891 * Open-counting is needed for pty masters, as well as for keeping
1892 * track of serial lines: DTR is dropped when the last close happens.
1893 * (This is not done solely through tty->count, now. - Ted 1/27/92)
1895 * The termios state of a pty is reset on first open so that
1896 * settings don't persist across reuse.
1898 * Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
1899 * tty->count should protect the rest.
1900 * ->siglock protects ->signal/->sighand
1902 * Note: the tty_unlock/lock cases without a ref are only safe due to
1906 static int tty_open(struct inode *inode, struct file *filp)
1908 struct tty_struct *tty;
1910 struct tty_driver *driver = NULL;
1912 dev_t device = inode->i_rdev;
1913 unsigned saved_flags = filp->f_flags;
1915 nonseekable_open(inode, filp);
1918 retval = tty_alloc_file(filp);
1922 noctty = filp->f_flags & O_NOCTTY;
1926 mutex_lock(&tty_mutex);
1927 /* This is protected by the tty_mutex */
1928 tty = tty_open_current_tty(device, filp);
1930 retval = PTR_ERR(tty);
1933 driver = tty_lookup_driver(device, filp, &noctty, &index);
1934 if (IS_ERR(driver)) {
1935 retval = PTR_ERR(driver);
1939 /* check whether we're reopening an existing tty */
1940 tty = tty_driver_lookup_tty(driver, inode, index);
1942 retval = PTR_ERR(tty);
1949 retval = tty_reopen(tty);
1952 tty = ERR_PTR(retval);
1954 } else /* Returns with the tty_lock held for now */
1955 tty = tty_init_dev(driver, index);
1957 mutex_unlock(&tty_mutex);
1959 tty_driver_kref_put(driver);
1961 retval = PTR_ERR(tty);
1965 tty_add_file(tty, filp);
1967 check_tty_count(tty, __func__);
1968 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
1969 tty->driver->subtype == PTY_TYPE_MASTER)
1971 #ifdef TTY_DEBUG_HANGUP
1972 printk(KERN_DEBUG "%s: opening %s...\n", __func__, tty->name);
1975 retval = tty->ops->open(tty, filp);
1978 filp->f_flags = saved_flags;
1980 if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) &&
1981 !capable(CAP_SYS_ADMIN))
1985 #ifdef TTY_DEBUG_HANGUP
1986 printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,
1989 tty_unlock(tty); /* need to call tty_release without BTM */
1990 tty_release(inode, filp);
1991 if (retval != -ERESTARTSYS)
1994 if (signal_pending(current))
1999 * Need to reset f_op in case a hangup happened.
2001 if (filp->f_op == &hung_up_tty_fops)
2002 filp->f_op = &tty_fops;
2008 mutex_lock(&tty_mutex);
2010 spin_lock_irq(¤t->sighand->siglock);
2012 current->signal->leader &&
2013 !current->signal->tty &&
2014 tty->session == NULL)
2015 __proc_set_tty(current, tty);
2016 spin_unlock_irq(¤t->sighand->siglock);
2018 mutex_unlock(&tty_mutex);
2021 mutex_unlock(&tty_mutex);
2022 /* after locks to avoid deadlock */
2023 if (!IS_ERR_OR_NULL(driver))
2024 tty_driver_kref_put(driver);
2026 tty_free_file(filp);
2033 * tty_poll - check tty status
2034 * @filp: file being polled
2035 * @wait: poll wait structures to update
2037 * Call the line discipline polling method to obtain the poll
2038 * status of the device.
2040 * Locking: locks called line discipline but ldisc poll method
2041 * may be re-entered freely by other callers.
2044 static unsigned int tty_poll(struct file *filp, poll_table *wait)
2046 struct tty_struct *tty = file_tty(filp);
2047 struct tty_ldisc *ld;
2050 if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_poll"))
2053 ld = tty_ldisc_ref_wait(tty);
2055 ret = (ld->ops->poll)(tty, filp, wait);
2056 tty_ldisc_deref(ld);
2060 static int __tty_fasync(int fd, struct file *filp, int on)
2062 struct tty_struct *tty = file_tty(filp);
2063 unsigned long flags;
2066 if (tty_paranoia_check(tty, filp->f_path.dentry->d_inode, "tty_fasync"))
2069 retval = fasync_helper(fd, filp, on, &tty->fasync);
2076 if (!waitqueue_active(&tty->read_wait))
2077 tty->minimum_to_wake = 1;
2078 spin_lock_irqsave(&tty->ctrl_lock, flags);
2081 type = PIDTYPE_PGID;
2083 pid = task_pid(current);
2087 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2088 retval = __f_setown(filp, pid, type, 0);
2093 if (!tty->fasync && !waitqueue_active(&tty->read_wait))
2094 tty->minimum_to_wake = N_TTY_BUF_SIZE;
2101 static int tty_fasync(int fd, struct file *filp, int on)
2103 struct tty_struct *tty = file_tty(filp);
2107 retval = __tty_fasync(fd, filp, on);
2114 * tiocsti - fake input character
2115 * @tty: tty to fake input into
2116 * @p: pointer to character
2118 * Fake input to a tty device. Does the necessary locking and
2121 * FIXME: does not honour flow control ??
2124 * Called functions take tty_ldisc_lock
2125 * current->signal->tty check is safe without locks
2127 * FIXME: may race normal receive processing
2130 static int tiocsti(struct tty_struct *tty, char __user *p)
2133 struct tty_ldisc *ld;
2135 if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
2137 if (get_user(ch, p))
2139 tty_audit_tiocsti(tty, ch);
2140 ld = tty_ldisc_ref_wait(tty);
2141 ld->ops->receive_buf(tty, &ch, &mbz, 1);
2142 tty_ldisc_deref(ld);
2147 * tiocgwinsz - implement window query ioctl
2149 * @arg: user buffer for result
2151 * Copies the kernel idea of the window size into the user buffer.
2153 * Locking: tty->termios_mutex is taken to ensure the winsize data
2157 static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
2161 mutex_lock(&tty->termios_mutex);
2162 err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
2163 mutex_unlock(&tty->termios_mutex);
2165 return err ? -EFAULT: 0;
2169 * tty_do_resize - resize event
2170 * @tty: tty being resized
2171 * @rows: rows (character)
2172 * @cols: cols (character)
2174 * Update the termios variables and send the necessary signals to
2175 * peform a terminal resize correctly
2178 int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
2181 unsigned long flags;
2184 mutex_lock(&tty->termios_mutex);
2185 if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
2187 /* Get the PID values and reference them so we can
2188 avoid holding the tty ctrl lock while sending signals */
2189 spin_lock_irqsave(&tty->ctrl_lock, flags);
2190 pgrp = get_pid(tty->pgrp);
2191 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2194 kill_pgrp(pgrp, SIGWINCH, 1);
2199 mutex_unlock(&tty->termios_mutex);
2202 EXPORT_SYMBOL(tty_do_resize);
2205 * tiocswinsz - implement window size set ioctl
2206 * @tty; tty side of tty
2207 * @arg: user buffer for result
2209 * Copies the user idea of the window size to the kernel. Traditionally
2210 * this is just advisory information but for the Linux console it
2211 * actually has driver level meaning and triggers a VC resize.
2214 * Driver dependent. The default do_resize method takes the
2215 * tty termios mutex and ctrl_lock. The console takes its own lock
2216 * then calls into the default method.
2219 static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
2221 struct winsize tmp_ws;
2222 if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
2225 if (tty->ops->resize)
2226 return tty->ops->resize(tty, &tmp_ws);
2228 return tty_do_resize(tty, &tmp_ws);
2232 * tioccons - allow admin to move logical console
2233 * @file: the file to become console
2235 * Allow the administrator to move the redirected console device
2237 * Locking: uses redirect_lock to guard the redirect information
2240 static int tioccons(struct file *file)
2242 if (!capable(CAP_SYS_ADMIN))
2244 if (file->f_op->write == redirected_tty_write) {
2246 spin_lock(&redirect_lock);
2249 spin_unlock(&redirect_lock);
2254 spin_lock(&redirect_lock);
2256 spin_unlock(&redirect_lock);
2259 redirect = get_file(file);
2260 spin_unlock(&redirect_lock);
2265 * fionbio - non blocking ioctl
2266 * @file: file to set blocking value
2267 * @p: user parameter
2269 * Historical tty interfaces had a blocking control ioctl before
2270 * the generic functionality existed. This piece of history is preserved
2271 * in the expected tty API of posix OS's.
2273 * Locking: none, the open file handle ensures it won't go away.
2276 static int fionbio(struct file *file, int __user *p)
2280 if (get_user(nonblock, p))
2283 spin_lock(&file->f_lock);
2285 file->f_flags |= O_NONBLOCK;
2287 file->f_flags &= ~O_NONBLOCK;
2288 spin_unlock(&file->f_lock);
2293 * tiocsctty - set controlling tty
2294 * @tty: tty structure
2295 * @arg: user argument
2297 * This ioctl is used to manage job control. It permits a session
2298 * leader to set this tty as the controlling tty for the session.
2301 * Takes tty_mutex() to protect tty instance
2302 * Takes tasklist_lock internally to walk sessions
2303 * Takes ->siglock() when updating signal->tty
2306 static int tiocsctty(struct tty_struct *tty, int arg)
2309 if (current->signal->leader && (task_session(current) == tty->session))
2312 mutex_lock(&tty_mutex);
2314 * The process must be a session leader and
2315 * not have a controlling tty already.
2317 if (!current->signal->leader || current->signal->tty) {
2324 * This tty is already the controlling
2325 * tty for another session group!
2327 if (arg == 1 && capable(CAP_SYS_ADMIN)) {
2331 read_lock(&tasklist_lock);
2332 session_clear_tty(tty->session);
2333 read_unlock(&tasklist_lock);
2339 proc_set_tty(current, tty);
2341 mutex_unlock(&tty_mutex);
2346 * tty_get_pgrp - return a ref counted pgrp pid
2349 * Returns a refcounted instance of the pid struct for the process
2350 * group controlling the tty.
2353 struct pid *tty_get_pgrp(struct tty_struct *tty)
2355 unsigned long flags;
2358 spin_lock_irqsave(&tty->ctrl_lock, flags);
2359 pgrp = get_pid(tty->pgrp);
2360 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2364 EXPORT_SYMBOL_GPL(tty_get_pgrp);
2367 * tiocgpgrp - get process group
2368 * @tty: tty passed by user
2369 * @real_tty: tty side of the tty passed by the user if a pty else the tty
2372 * Obtain the process group of the tty. If there is no process group
2375 * Locking: none. Reference to current->signal->tty is safe.
2378 static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
2383 * (tty == real_tty) is a cheap way of
2384 * testing if the tty is NOT a master pty.
2386 if (tty == real_tty && current->signal->tty != real_tty)
2388 pid = tty_get_pgrp(real_tty);
2389 ret = put_user(pid_vnr(pid), p);
2395 * tiocspgrp - attempt to set process group
2396 * @tty: tty passed by user
2397 * @real_tty: tty side device matching tty passed by user
2400 * Set the process group of the tty to the session passed. Only
2401 * permitted where the tty session is our session.
2403 * Locking: RCU, ctrl lock
2406 static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
2410 int retval = tty_check_change(real_tty);
2411 unsigned long flags;
2417 if (!current->signal->tty ||
2418 (current->signal->tty != real_tty) ||
2419 (real_tty->session != task_session(current)))
2421 if (get_user(pgrp_nr, p))
2426 pgrp = find_vpid(pgrp_nr);
2431 if (session_of_pgrp(pgrp) != task_session(current))
2434 spin_lock_irqsave(&tty->ctrl_lock, flags);
2435 put_pid(real_tty->pgrp);
2436 real_tty->pgrp = get_pid(pgrp);
2437 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2444 * tiocgsid - get session id
2445 * @tty: tty passed by user
2446 * @real_tty: tty side of the tty passed by the user if a pty else the tty
2447 * @p: pointer to returned session id
2449 * Obtain the session id of the tty. If there is no session
2452 * Locking: none. Reference to current->signal->tty is safe.
2455 static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
2458 * (tty == real_tty) is a cheap way of
2459 * testing if the tty is NOT a master pty.
2461 if (tty == real_tty && current->signal->tty != real_tty)
2463 if (!real_tty->session)
2465 return put_user(pid_vnr(real_tty->session), p);
2469 * tiocsetd - set line discipline
2471 * @p: pointer to user data
2473 * Set the line discipline according to user request.
2475 * Locking: see tty_set_ldisc, this function is just a helper
2478 static int tiocsetd(struct tty_struct *tty, int __user *p)
2483 if (get_user(ldisc, p))
2486 ret = tty_set_ldisc(tty, ldisc);
2492 * send_break - performed time break
2493 * @tty: device to break on
2494 * @duration: timeout in mS
2496 * Perform a timed break on hardware that lacks its own driver level
2497 * timed break functionality.
2500 * atomic_write_lock serializes
2504 static int send_break(struct tty_struct *tty, unsigned int duration)
2508 if (tty->ops->break_ctl == NULL)
2511 if (tty->driver->flags & TTY_DRIVER_HARDWARE_BREAK)
2512 retval = tty->ops->break_ctl(tty, duration);
2514 /* Do the work ourselves */
2515 if (tty_write_lock(tty, 0) < 0)
2517 retval = tty->ops->break_ctl(tty, -1);
2520 if (!signal_pending(current))
2521 msleep_interruptible(duration);
2522 retval = tty->ops->break_ctl(tty, 0);
2524 tty_write_unlock(tty);
2525 if (signal_pending(current))
2532 * tty_tiocmget - get modem status
2534 * @file: user file pointer
2535 * @p: pointer to result
2537 * Obtain the modem status bits from the tty driver if the feature
2538 * is supported. Return -EINVAL if it is not available.
2540 * Locking: none (up to the driver)
2543 static int tty_tiocmget(struct tty_struct *tty, int __user *p)
2545 int retval = -EINVAL;
2547 if (tty->ops->tiocmget) {
2548 retval = tty->ops->tiocmget(tty);
2551 retval = put_user(retval, p);
2557 * tty_tiocmset - set modem status
2559 * @cmd: command - clear bits, set bits or set all
2560 * @p: pointer to desired bits
2562 * Set the modem status bits from the tty driver if the feature
2563 * is supported. Return -EINVAL if it is not available.
2565 * Locking: none (up to the driver)
2568 static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
2572 unsigned int set, clear, val;
2574 if (tty->ops->tiocmset == NULL)
2577 retval = get_user(val, p);
2593 set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
2594 clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
2595 return tty->ops->tiocmset(tty, set, clear);
2598 static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
2600 int retval = -EINVAL;
2601 struct serial_icounter_struct icount;
2602 memset(&icount, 0, sizeof(icount));
2603 if (tty->ops->get_icount)
2604 retval = tty->ops->get_icount(tty, &icount);
2607 if (copy_to_user(arg, &icount, sizeof(icount)))
2612 struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
2614 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2615 tty->driver->subtype == PTY_TYPE_MASTER)
2619 EXPORT_SYMBOL(tty_pair_get_tty);
2621 struct tty_struct *tty_pair_get_pty(struct tty_struct *tty)
2623 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2624 tty->driver->subtype == PTY_TYPE_MASTER)
2628 EXPORT_SYMBOL(tty_pair_get_pty);
2631 * Split this up, as gcc can choke on it otherwise..
2633 long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2635 struct tty_struct *tty = file_tty(file);
2636 struct tty_struct *real_tty;
2637 void __user *p = (void __user *)arg;
2639 struct tty_ldisc *ld;
2640 struct inode *inode = file->f_dentry->d_inode;
2642 if (tty_paranoia_check(tty, inode, "tty_ioctl"))
2645 real_tty = tty_pair_get_tty(tty);
2648 * Factor out some common prep work
2656 retval = tty_check_change(tty);
2659 if (cmd != TIOCCBRK) {
2660 tty_wait_until_sent(tty, 0);
2661 if (signal_pending(current))
2672 return tiocsti(tty, p);
2674 return tiocgwinsz(real_tty, p);
2676 return tiocswinsz(real_tty, p);
2678 return real_tty != tty ? -EINVAL : tioccons(file);
2680 return fionbio(file, p);
2682 set_bit(TTY_EXCLUSIVE, &tty->flags);
2685 clear_bit(TTY_EXCLUSIVE, &tty->flags);
2689 int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
2690 return put_user(excl, (int __user *)p);
2693 if (current->signal->tty != tty)
2698 return tiocsctty(tty, arg);
2700 return tiocgpgrp(tty, real_tty, p);
2702 return tiocspgrp(tty, real_tty, p);
2704 return tiocgsid(tty, real_tty, p);
2706 return put_user(tty->ldisc->ops->num, (int __user *)p);
2708 return tiocsetd(tty, p);
2710 if (!capable(CAP_SYS_ADMIN))
2716 unsigned int ret = new_encode_dev(tty_devnum(real_tty));
2717 return put_user(ret, (unsigned int __user *)p);
2722 case TIOCSBRK: /* Turn break on, unconditionally */
2723 if (tty->ops->break_ctl)
2724 return tty->ops->break_ctl(tty, -1);
2726 case TIOCCBRK: /* Turn break off, unconditionally */
2727 if (tty->ops->break_ctl)
2728 return tty->ops->break_ctl(tty, 0);
2730 case TCSBRK: /* SVID version: non-zero arg --> no break */
2731 /* non-zero arg means wait for all output data
2732 * to be sent (performed above) but don't send break.
2733 * This is used by the tcdrain() termios function.
2736 return send_break(tty, 250);
2738 case TCSBRKP: /* support for POSIX tcsendbreak() */
2739 return send_break(tty, arg ? arg*100 : 250);
2742 return tty_tiocmget(tty, p);
2746 return tty_tiocmset(tty, cmd, p);
2748 retval = tty_tiocgicount(tty, p);
2749 /* For the moment allow fall through to the old method */
2750 if (retval != -EINVAL)
2757 /* flush tty buffer and allow ldisc to process ioctl */
2758 tty_buffer_flush(tty);
2763 if (tty->ops->ioctl) {
2764 retval = (tty->ops->ioctl)(tty, cmd, arg);
2765 if (retval != -ENOIOCTLCMD)
2768 ld = tty_ldisc_ref_wait(tty);
2770 if (ld->ops->ioctl) {
2771 retval = ld->ops->ioctl(tty, file, cmd, arg);
2772 if (retval == -ENOIOCTLCMD)
2775 tty_ldisc_deref(ld);
2779 #ifdef CONFIG_COMPAT
2780 static long tty_compat_ioctl(struct file *file, unsigned int cmd,
2783 struct inode *inode = file->f_dentry->d_inode;
2784 struct tty_struct *tty = file_tty(file);
2785 struct tty_ldisc *ld;
2786 int retval = -ENOIOCTLCMD;
2788 if (tty_paranoia_check(tty, inode, "tty_ioctl"))
2791 if (tty->ops->compat_ioctl) {
2792 retval = (tty->ops->compat_ioctl)(tty, cmd, arg);
2793 if (retval != -ENOIOCTLCMD)
2797 ld = tty_ldisc_ref_wait(tty);
2798 if (ld->ops->compat_ioctl)
2799 retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
2801 retval = n_tty_compat_ioctl_helper(tty, file, cmd, arg);
2802 tty_ldisc_deref(ld);
2808 static int this_tty(const void *t, struct file *file, unsigned fd)
2810 if (likely(file->f_op->read != tty_read))
2812 return file_tty(file) != t ? 0 : fd + 1;
2816 * This implements the "Secure Attention Key" --- the idea is to
2817 * prevent trojan horses by killing all processes associated with this
2818 * tty when the user hits the "Secure Attention Key". Required for
2819 * super-paranoid applications --- see the Orange Book for more details.
2821 * This code could be nicer; ideally it should send a HUP, wait a few
2822 * seconds, then send a INT, and then a KILL signal. But you then
2823 * have to coordinate with the init process, since all processes associated
2824 * with the current tty must be dead before the new getty is allowed
2827 * Now, if it would be correct ;-/ The current code has a nasty hole -
2828 * it doesn't catch files in flight. We may send the descriptor to ourselves
2829 * via AF_UNIX socket, close it and later fetch from socket. FIXME.
2831 * Nasty bug: do_SAK is being called in interrupt context. This can
2832 * deadlock. We punt it up to process context. AKPM - 16Mar2001
2834 void __do_SAK(struct tty_struct *tty)
2839 struct task_struct *g, *p;
2840 struct pid *session;
2845 session = tty->session;
2847 tty_ldisc_flush(tty);
2849 tty_driver_flush_buffer(tty);
2851 read_lock(&tasklist_lock);
2852 /* Kill the entire session */
2853 do_each_pid_task(session, PIDTYPE_SID, p) {
2854 printk(KERN_NOTICE "SAK: killed process %d"
2855 " (%s): task_session(p)==tty->session\n",
2856 task_pid_nr(p), p->comm);
2857 send_sig(SIGKILL, p, 1);
2858 } while_each_pid_task(session, PIDTYPE_SID, p);
2859 /* Now kill any processes that happen to have the
2862 do_each_thread(g, p) {
2863 if (p->signal->tty == tty) {
2864 printk(KERN_NOTICE "SAK: killed process %d"
2865 " (%s): task_session(p)==tty->session\n",
2866 task_pid_nr(p), p->comm);
2867 send_sig(SIGKILL, p, 1);
2871 i = iterate_fd(p->files, 0, this_tty, tty);
2873 printk(KERN_NOTICE "SAK: killed process %d"
2874 " (%s): fd#%d opened to the tty\n",
2875 task_pid_nr(p), p->comm, i - 1);
2876 force_sig(SIGKILL, p);
2879 } while_each_thread(g, p);
2880 read_unlock(&tasklist_lock);
2884 static void do_SAK_work(struct work_struct *work)
2886 struct tty_struct *tty =
2887 container_of(work, struct tty_struct, SAK_work);
2892 * The tq handling here is a little racy - tty->SAK_work may already be queued.
2893 * Fortunately we don't need to worry, because if ->SAK_work is already queued,
2894 * the values which we write to it will be identical to the values which it
2895 * already has. --akpm
2897 void do_SAK(struct tty_struct *tty)
2901 schedule_work(&tty->SAK_work);
2904 EXPORT_SYMBOL(do_SAK);
2906 static int dev_match_devt(struct device *dev, const void *data)
2908 const dev_t *devt = data;
2909 return dev->devt == *devt;
2912 /* Must put_device() after it's unused! */
2913 static struct device *tty_get_device(struct tty_struct *tty)
2915 dev_t devt = tty_devnum(tty);
2916 return class_find_device(tty_class, NULL, &devt, dev_match_devt);
2921 * initialize_tty_struct
2922 * @tty: tty to initialize
2924 * This subroutine initializes a tty structure that has been newly
2927 * Locking: none - tty in question must not be exposed at this point
2930 void initialize_tty_struct(struct tty_struct *tty,
2931 struct tty_driver *driver, int idx)
2933 memset(tty, 0, sizeof(struct tty_struct));
2934 kref_init(&tty->kref);
2935 tty->magic = TTY_MAGIC;
2936 tty_ldisc_init(tty);
2937 tty->session = NULL;
2939 mutex_init(&tty->legacy_mutex);
2940 mutex_init(&tty->termios_mutex);
2941 mutex_init(&tty->ldisc_mutex);
2942 init_waitqueue_head(&tty->write_wait);
2943 init_waitqueue_head(&tty->read_wait);
2944 INIT_WORK(&tty->hangup_work, do_tty_hangup);
2945 mutex_init(&tty->atomic_write_lock);
2946 spin_lock_init(&tty->ctrl_lock);
2947 INIT_LIST_HEAD(&tty->tty_files);
2948 INIT_WORK(&tty->SAK_work, do_SAK_work);
2950 tty->driver = driver;
2951 tty->ops = driver->ops;
2953 tty_line_name(driver, idx, tty->name);
2954 tty->dev = tty_get_device(tty);
2958 * deinitialize_tty_struct
2959 * @tty: tty to deinitialize
2961 * This subroutine deinitializes a tty structure that has been newly
2962 * allocated but tty_release cannot be called on that yet.
2964 * Locking: none - tty in question must not be exposed at this point
2966 void deinitialize_tty_struct(struct tty_struct *tty)
2968 tty_ldisc_deinit(tty);
2972 * tty_put_char - write one character to a tty
2976 * Write one byte to the tty using the provided put_char method
2977 * if present. Returns the number of characters successfully output.
2979 * Note: the specific put_char operation in the driver layer may go
2980 * away soon. Don't call it directly, use this method
2983 int tty_put_char(struct tty_struct *tty, unsigned char ch)
2985 if (tty->ops->put_char)
2986 return tty->ops->put_char(tty, ch);
2987 return tty->ops->write(tty, &ch, 1);
2989 EXPORT_SYMBOL_GPL(tty_put_char);
2991 struct class *tty_class;
2993 static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
2994 unsigned int index, unsigned int count)
2996 /* init here, since reused cdevs cause crashes */
2997 cdev_init(&driver->cdevs[index], &tty_fops);
2998 driver->cdevs[index].owner = driver->owner;
2999 return cdev_add(&driver->cdevs[index], dev, count);
3003 * tty_register_device - register a tty device
3004 * @driver: the tty driver that describes the tty device
3005 * @index: the index in the tty driver for this tty device
3006 * @device: a struct device that is associated with this tty device.
3007 * This field is optional, if there is no known struct device
3008 * for this tty device it can be set to NULL safely.
3010 * Returns a pointer to the struct device for this tty device
3011 * (or ERR_PTR(-EFOO) on error).
3013 * This call is required to be made to register an individual tty device
3014 * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
3015 * that bit is not set, this function should not be called by a tty
3021 struct device *tty_register_device(struct tty_driver *driver, unsigned index,
3022 struct device *device)
3024 return tty_register_device_attr(driver, index, device, NULL, NULL);
3026 EXPORT_SYMBOL(tty_register_device);
3028 static void tty_device_create_release(struct device *dev)
3030 pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
3035 * tty_register_device_attr - register a tty device
3036 * @driver: the tty driver that describes the tty device
3037 * @index: the index in the tty driver for this tty device
3038 * @device: a struct device that is associated with this tty device.
3039 * This field is optional, if there is no known struct device
3040 * for this tty device it can be set to NULL safely.
3041 * @drvdata: Driver data to be set to device.
3042 * @attr_grp: Attribute group to be set on device.
3044 * Returns a pointer to the struct device for this tty device
3045 * (or ERR_PTR(-EFOO) on error).
3047 * This call is required to be made to register an individual tty device
3048 * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
3049 * that bit is not set, this function should not be called by a tty
3054 struct device *tty_register_device_attr(struct tty_driver *driver,
3055 unsigned index, struct device *device,
3057 const struct attribute_group **attr_grp)
3060 dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
3061 struct device *dev = NULL;
3062 int retval = -ENODEV;
3065 if (index >= driver->num) {
3066 printk(KERN_ERR "Attempt to register invalid tty line number "
3068 return ERR_PTR(-EINVAL);
3071 if (driver->type == TTY_DRIVER_TYPE_PTY)
3072 pty_line_name(driver, index, name);
3074 tty_line_name(driver, index, name);
3076 if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3077 retval = tty_cdev_add(driver, devt, index, 1);
3083 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3090 dev->class = tty_class;
3091 dev->parent = device;
3092 dev->release = tty_device_create_release;
3093 dev_set_name(dev, "%s", name);
3094 dev->groups = attr_grp;
3095 dev_set_drvdata(dev, drvdata);
3097 retval = device_register(dev);
3106 cdev_del(&driver->cdevs[index]);
3107 return ERR_PTR(retval);
3109 EXPORT_SYMBOL_GPL(tty_register_device_attr);
3112 * tty_unregister_device - unregister a tty device
3113 * @driver: the tty driver that describes the tty device
3114 * @index: the index in the tty driver for this tty device
3116 * If a tty device is registered with a call to tty_register_device() then
3117 * this function must be called when the tty device is gone.
3122 void tty_unregister_device(struct tty_driver *driver, unsigned index)
3124 device_destroy(tty_class,
3125 MKDEV(driver->major, driver->minor_start) + index);
3126 if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC))
3127 cdev_del(&driver->cdevs[index]);
3129 EXPORT_SYMBOL(tty_unregister_device);
3132 * __tty_alloc_driver -- allocate tty driver
3133 * @lines: count of lines this driver can handle at most
3134 * @owner: module which is repsonsible for this driver
3135 * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
3137 * This should not be called directly, some of the provided macros should be
3138 * used instead. Use IS_ERR and friends on @retval.
3140 struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
3141 unsigned long flags)
3143 struct tty_driver *driver;
3144 unsigned int cdevs = 1;
3147 if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))
3148 return ERR_PTR(-EINVAL);
3150 driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
3152 return ERR_PTR(-ENOMEM);
3154 kref_init(&driver->kref);
3155 driver->magic = TTY_DRIVER_MAGIC;
3156 driver->num = lines;
3157 driver->owner = owner;
3158 driver->flags = flags;
3160 if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {
3161 driver->ttys = kcalloc(lines, sizeof(*driver->ttys),
3163 driver->termios = kcalloc(lines, sizeof(*driver->termios),
3165 if (!driver->ttys || !driver->termios) {
3171 if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3172 driver->ports = kcalloc(lines, sizeof(*driver->ports),
3174 if (!driver->ports) {
3181 driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);
3182 if (!driver->cdevs) {
3189 kfree(driver->ports);
3190 kfree(driver->ttys);
3191 kfree(driver->termios);
3193 return ERR_PTR(err);
3195 EXPORT_SYMBOL(__tty_alloc_driver);
3197 static void destruct_tty_driver(struct kref *kref)
3199 struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
3201 struct ktermios *tp;
3203 if (driver->flags & TTY_DRIVER_INSTALLED) {
3205 * Free the termios and termios_locked structures because
3206 * we don't want to get memory leaks when modular tty
3207 * drivers are removed from the kernel.
3209 for (i = 0; i < driver->num; i++) {
3210 tp = driver->termios[i];
3212 driver->termios[i] = NULL;
3215 if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
3216 tty_unregister_device(driver, i);
3218 proc_tty_unregister_driver(driver);
3219 if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)
3220 cdev_del(&driver->cdevs[0]);
3222 kfree(driver->cdevs);
3223 kfree(driver->ports);
3224 kfree(driver->termios);
3225 kfree(driver->ttys);
3229 void tty_driver_kref_put(struct tty_driver *driver)
3231 kref_put(&driver->kref, destruct_tty_driver);
3233 EXPORT_SYMBOL(tty_driver_kref_put);
3235 void tty_set_operations(struct tty_driver *driver,
3236 const struct tty_operations *op)
3240 EXPORT_SYMBOL(tty_set_operations);
3242 void put_tty_driver(struct tty_driver *d)
3244 tty_driver_kref_put(d);
3246 EXPORT_SYMBOL(put_tty_driver);
3249 * Called by a tty driver to register itself.
3251 int tty_register_driver(struct tty_driver *driver)
3258 if (!driver->major) {
3259 error = alloc_chrdev_region(&dev, driver->minor_start,
3260 driver->num, driver->name);
3262 driver->major = MAJOR(dev);
3263 driver->minor_start = MINOR(dev);
3266 dev = MKDEV(driver->major, driver->minor_start);
3267 error = register_chrdev_region(dev, driver->num, driver->name);
3272 if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {
3273 error = tty_cdev_add(driver, dev, 0, driver->num);
3275 goto err_unreg_char;
3278 mutex_lock(&tty_mutex);
3279 list_add(&driver->tty_drivers, &tty_drivers);
3280 mutex_unlock(&tty_mutex);
3282 if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
3283 for (i = 0; i < driver->num; i++) {
3284 d = tty_register_device(driver, i, NULL);
3287 goto err_unreg_devs;
3291 proc_tty_register_driver(driver);
3292 driver->flags |= TTY_DRIVER_INSTALLED;
3296 for (i--; i >= 0; i--)
3297 tty_unregister_device(driver, i);
3299 mutex_lock(&tty_mutex);
3300 list_del(&driver->tty_drivers);
3301 mutex_unlock(&tty_mutex);
3304 unregister_chrdev_region(dev, driver->num);
3308 EXPORT_SYMBOL(tty_register_driver);
3311 * Called by a tty driver to unregister itself.
3313 int tty_unregister_driver(struct tty_driver *driver)
3317 if (driver->refcount)
3320 unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
3322 mutex_lock(&tty_mutex);
3323 list_del(&driver->tty_drivers);
3324 mutex_unlock(&tty_mutex);
3328 EXPORT_SYMBOL(tty_unregister_driver);
3330 dev_t tty_devnum(struct tty_struct *tty)
3332 return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
3334 EXPORT_SYMBOL(tty_devnum);
3336 void proc_clear_tty(struct task_struct *p)
3338 unsigned long flags;
3339 struct tty_struct *tty;
3340 spin_lock_irqsave(&p->sighand->siglock, flags);
3341 tty = p->signal->tty;
3342 p->signal->tty = NULL;
3343 spin_unlock_irqrestore(&p->sighand->siglock, flags);
3347 /* Called under the sighand lock */
3349 static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
3352 unsigned long flags;
3353 /* We should not have a session or pgrp to put here but.... */
3354 spin_lock_irqsave(&tty->ctrl_lock, flags);
3355 put_pid(tty->session);
3357 tty->pgrp = get_pid(task_pgrp(tsk));
3358 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
3359 tty->session = get_pid(task_session(tsk));
3360 if (tsk->signal->tty) {
3361 printk(KERN_DEBUG "tty not NULL!!\n");
3362 tty_kref_put(tsk->signal->tty);
3365 put_pid(tsk->signal->tty_old_pgrp);
3366 tsk->signal->tty = tty_kref_get(tty);
3367 tsk->signal->tty_old_pgrp = NULL;
3370 static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
3372 spin_lock_irq(&tsk->sighand->siglock);
3373 __proc_set_tty(tsk, tty);
3374 spin_unlock_irq(&tsk->sighand->siglock);
3377 struct tty_struct *get_current_tty(void)
3379 struct tty_struct *tty;
3380 unsigned long flags;
3382 spin_lock_irqsave(¤t->sighand->siglock, flags);
3383 tty = tty_kref_get(current->signal->tty);
3384 spin_unlock_irqrestore(¤t->sighand->siglock, flags);
3387 EXPORT_SYMBOL_GPL(get_current_tty);
3389 void tty_default_fops(struct file_operations *fops)
3395 * Initialize the console device. This is called *early*, so
3396 * we can't necessarily depend on lots of kernel help here.
3397 * Just do some early initializations, and do the complex setup
3400 void __init console_init(void)
3404 /* Setup the default TTY line discipline. */
3408 * set up the console device so that later boot sequences can
3409 * inform about problems etc..
3411 call = __con_initcall_start;
3412 while (call < __con_initcall_end) {
3418 static char *tty_devnode(struct device *dev, umode_t *mode)
3422 if (dev->devt == MKDEV(TTYAUX_MAJOR, 0) ||
3423 dev->devt == MKDEV(TTYAUX_MAJOR, 2))
3428 static int __init tty_class_init(void)
3430 tty_class = class_create(THIS_MODULE, "tty");
3431 if (IS_ERR(tty_class))
3432 return PTR_ERR(tty_class);
3433 tty_class->devnode = tty_devnode;
3437 postcore_initcall(tty_class_init);
3439 /* 3/2004 jmc: why do these devices exist? */
3440 static struct cdev tty_cdev, console_cdev;
3442 static ssize_t show_cons_active(struct device *dev,
3443 struct device_attribute *attr, char *buf)
3445 struct console *cs[16];
3451 for_each_console(c) {
3456 if ((c->flags & CON_ENABLED) == 0)
3459 if (i >= ARRAY_SIZE(cs))
3463 count += sprintf(buf + count, "%s%d%c",
3464 cs[i]->name, cs[i]->index, i ? ' ':'\n');
3469 static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL);
3471 static struct device *consdev;
3473 void console_sysfs_notify(void)
3476 sysfs_notify(&consdev->kobj, NULL, "active");
3480 * Ok, now we can initialize the rest of the tty devices and can count
3481 * on memory allocations, interrupts etc..
3483 int __init tty_init(void)
3485 cdev_init(&tty_cdev, &tty_fops);
3486 if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
3487 register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
3488 panic("Couldn't register /dev/tty driver\n");
3489 device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
3491 cdev_init(&console_cdev, &console_fops);
3492 if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
3493 register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
3494 panic("Couldn't register /dev/console driver\n");
3495 consdev = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
3497 if (IS_ERR(consdev))
3500 WARN_ON(device_create_file(consdev, &dev_attr_active) < 0);
3503 vty_init(&console_fops);