2 * Copyright (C) 1991, 1992 Linus Torvalds
6 * 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles
7 * or rs-channels. It also implements echoing, cooked mode etc.
9 * Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0.
11 * Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the
12 * tty_struct and tty_queue structures. Previously there was an array
13 * of 256 tty_struct's which was statically allocated, and the
14 * tty_queue structures were allocated at boot time. Both are now
15 * dynamically allocated only when the tty is open.
17 * Also restructured routines so that there is more of a separation
18 * between the high-level tty routines (tty_io.c and tty_ioctl.c) and
19 * the low-level tty routines (serial.c, pty.c, console.c). This
20 * makes for cleaner and more compact code. -TYT, 9/17/92
22 * Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
23 * which can be dynamically activated and de-activated by the line
24 * discipline handling modules (like SLIP).
26 * NOTE: pay no attention to the line discipline code (yet); its
27 * interface is still subject to change in this version...
30 * Added functionality to the OPOST tty handling. No delays, but all
31 * other bits should be there.
32 * -- Nick Holloway <alfie@dcs.warwick.ac.uk>, 27th May 1993.
34 * Rewrote canonical mode and added more termios flags.
35 * -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94
37 * Reorganized FASYNC support so mouse code can share it.
38 * -- ctm@ardi.com, 9Sep95
40 * New TIOCLINUX variants added.
41 * -- mj@k332.feld.cvut.cz, 19-Nov-95
43 * Restrict vt switching via ioctl()
44 * -- grif@cs.ucr.edu, 5-Dec-95
46 * Move console and virtual terminal code to more appropriate files,
47 * implement CONFIG_VT and generalize console device interface.
48 * -- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
50 * Rewrote tty_init_dev and tty_release_dev to eliminate races.
51 * -- Bill Hawes <whawes@star.net>, June 97
53 * Added devfs support.
54 * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 13-Jan-1998
56 * Added support for a Unix98-style ptmx device.
57 * -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
59 * Reduced memory usage for older ARM systems
60 * -- Russell King <rmk@arm.linux.org.uk>
62 * Move do_SAK() into process context. Less stack use in devfs functions.
63 * alloc_tty_struct() always uses kmalloc()
64 * -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
67 #include <linux/types.h>
68 #include <linux/major.h>
69 #include <linux/errno.h>
70 #include <linux/signal.h>
71 #include <linux/fcntl.h>
72 #include <linux/sched.h>
73 #include <linux/interrupt.h>
74 #include <linux/tty.h>
75 #include <linux/tty_driver.h>
76 #include <linux/tty_flip.h>
77 #include <linux/devpts_fs.h>
78 #include <linux/file.h>
79 #include <linux/fdtable.h>
80 #include <linux/console.h>
81 #include <linux/timer.h>
82 #include <linux/ctype.h>
85 #include <linux/string.h>
86 #include <linux/slab.h>
87 #include <linux/poll.h>
88 #include <linux/proc_fs.h>
89 #include <linux/init.h>
90 #include <linux/module.h>
91 #include <linux/device.h>
92 #include <linux/wait.h>
93 #include <linux/bitops.h>
94 #include <linux/delay.h>
95 #include <linux/seq_file.h>
96 #include <linux/serial.h>
97 #include <linux/ratelimit.h>
99 #include <linux/uaccess.h>
101 #include <linux/kbd_kern.h>
102 #include <linux/vt_kern.h>
103 #include <linux/selection.h>
105 #include <linux/kmod.h>
106 #include <linux/nsproxy.h>
108 #undef TTY_DEBUG_HANGUP
110 #define TTY_PARANOIA_CHECK 1
111 #define CHECK_TTY_COUNT 1
113 struct ktermios tty_std_termios = { /* for the benefit of tty drivers */
114 .c_iflag = ICRNL | IXON,
115 .c_oflag = OPOST | ONLCR,
116 .c_cflag = B38400 | CS8 | CREAD | HUPCL,
117 .c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
118 ECHOCTL | ECHOKE | IEXTEN,
124 EXPORT_SYMBOL(tty_std_termios);
126 /* This list gets poked at by procfs and various bits of boot up code. This
127 could do with some rationalisation such as pulling the tty proc function
130 LIST_HEAD(tty_drivers); /* linked list of tty drivers */
132 /* Mutex to protect creating and releasing a tty. This is shared with
133 vt.c for deeply disgusting hack reasons */
134 DEFINE_MUTEX(tty_mutex);
135 EXPORT_SYMBOL(tty_mutex);
137 /* Spinlock to protect the tty->tty_files list */
138 DEFINE_SPINLOCK(tty_files_lock);
140 static ssize_t tty_read(struct file *, char __user *, size_t, loff_t *);
141 static ssize_t tty_write(struct file *, const char __user *, size_t, loff_t *);
142 ssize_t redirected_tty_write(struct file *, const char __user *,
144 static unsigned int tty_poll(struct file *, poll_table *);
145 static int tty_open(struct inode *, struct file *);
146 long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
148 static long tty_compat_ioctl(struct file *file, unsigned int cmd,
151 #define tty_compat_ioctl NULL
153 static int __tty_fasync(int fd, struct file *filp, int on);
154 static int tty_fasync(int fd, struct file *filp, int on);
155 static void release_tty(struct tty_struct *tty, int idx);
156 static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
157 static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty);
160 * free_tty_struct - free a disused tty
161 * @tty: tty struct to free
163 * Free the write buffers, tty queue and tty memory itself.
165 * Locking: none. Must be called after tty is definitely unused
168 void free_tty_struct(struct tty_struct *tty)
173 put_device(tty->dev);
174 kfree(tty->write_buf);
175 tty->magic = 0xDEADDEAD;
179 static inline struct tty_struct *file_tty(struct file *file)
181 return ((struct tty_file_private *)file->private_data)->tty;
184 int tty_alloc_file(struct file *file)
186 struct tty_file_private *priv;
188 priv = kmalloc(sizeof(*priv), GFP_KERNEL);
192 file->private_data = priv;
197 /* Associate a new file with the tty structure */
198 void tty_add_file(struct tty_struct *tty, struct file *file)
200 struct tty_file_private *priv = file->private_data;
205 spin_lock(&tty_files_lock);
206 list_add(&priv->list, &tty->tty_files);
207 spin_unlock(&tty_files_lock);
211 * tty_free_file - free file->private_data
213 * This shall be used only for fail path handling when tty_add_file was not
216 void tty_free_file(struct file *file)
218 struct tty_file_private *priv = file->private_data;
220 file->private_data = NULL;
224 /* Delete file from its tty */
225 static void tty_del_file(struct file *file)
227 struct tty_file_private *priv = file->private_data;
229 spin_lock(&tty_files_lock);
230 list_del(&priv->list);
231 spin_unlock(&tty_files_lock);
236 #define TTY_NUMBER(tty) ((tty)->index + (tty)->driver->name_base)
239 * tty_name - return tty naming
240 * @tty: tty structure
241 * @buf: buffer for output
243 * Convert a tty structure into a name. The name reflects the kernel
244 * naming policy and if udev is in use may not reflect user space
249 char *tty_name(struct tty_struct *tty, char *buf)
251 if (!tty) /* Hmm. NULL pointer. That's fun. */
252 strcpy(buf, "NULL tty");
254 strcpy(buf, tty->name);
258 EXPORT_SYMBOL(tty_name);
260 int tty_paranoia_check(struct tty_struct *tty, struct inode *inode,
263 #ifdef TTY_PARANOIA_CHECK
266 "null TTY for (%d:%d) in %s\n",
267 imajor(inode), iminor(inode), routine);
270 if (tty->magic != TTY_MAGIC) {
272 "bad magic number for tty struct (%d:%d) in %s\n",
273 imajor(inode), iminor(inode), routine);
280 static int check_tty_count(struct tty_struct *tty, const char *routine)
282 #ifdef CHECK_TTY_COUNT
286 spin_lock(&tty_files_lock);
287 list_for_each(p, &tty->tty_files) {
290 spin_unlock(&tty_files_lock);
291 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
292 tty->driver->subtype == PTY_TYPE_SLAVE &&
293 tty->link && tty->link->count)
295 if (tty->count != count) {
296 printk(KERN_WARNING "Warning: dev (%s) tty->count(%d) "
297 "!= #fd's(%d) in %s\n",
298 tty->name, tty->count, count, routine);
306 * get_tty_driver - find device of a tty
307 * @dev_t: device identifier
308 * @index: returns the index of the tty
310 * This routine returns a tty driver structure, given a device number
311 * and also passes back the index number.
313 * Locking: caller must hold tty_mutex
316 static struct tty_driver *get_tty_driver(dev_t device, int *index)
318 struct tty_driver *p;
320 list_for_each_entry(p, &tty_drivers, tty_drivers) {
321 dev_t base = MKDEV(p->major, p->minor_start);
322 if (device < base || device >= base + p->num)
324 *index = device - base;
325 return tty_driver_kref_get(p);
330 #ifdef CONFIG_CONSOLE_POLL
333 * tty_find_polling_driver - find device of a polled tty
334 * @name: name string to match
335 * @line: pointer to resulting tty line nr
337 * This routine returns a tty driver structure, given a name
338 * and the condition that the tty driver is capable of polled
341 struct tty_driver *tty_find_polling_driver(char *name, int *line)
343 struct tty_driver *p, *res = NULL;
348 for (str = name; *str; str++)
349 if ((*str >= '0' && *str <= '9') || *str == ',')
355 tty_line = simple_strtoul(str, &str, 10);
357 mutex_lock(&tty_mutex);
358 /* Search through the tty devices to look for a match */
359 list_for_each_entry(p, &tty_drivers, tty_drivers) {
360 if (strncmp(name, p->name, len) != 0)
368 if (tty_line >= 0 && tty_line < p->num && p->ops &&
369 p->ops->poll_init && !p->ops->poll_init(p, tty_line, stp)) {
370 res = tty_driver_kref_get(p);
375 mutex_unlock(&tty_mutex);
379 EXPORT_SYMBOL_GPL(tty_find_polling_driver);
383 * tty_check_change - check for POSIX terminal changes
386 * If we try to write to, or set the state of, a terminal and we're
387 * not in the foreground, send a SIGTTOU. If the signal is blocked or
388 * ignored, go ahead and perform the operation. (POSIX 7.2)
393 int tty_check_change(struct tty_struct *tty)
398 if (current->signal->tty != tty)
401 spin_lock_irqsave(&tty->ctrl_lock, flags);
404 printk(KERN_WARNING "tty_check_change: tty->pgrp == NULL!\n");
407 if (task_pgrp(current) == tty->pgrp)
409 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
410 if (is_ignored(SIGTTOU))
412 if (is_current_pgrp_orphaned()) {
416 kill_pgrp(task_pgrp(current), SIGTTOU, 1);
417 set_thread_flag(TIF_SIGPENDING);
422 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
426 EXPORT_SYMBOL(tty_check_change);
428 static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
429 size_t count, loff_t *ppos)
434 static ssize_t hung_up_tty_write(struct file *file, const char __user *buf,
435 size_t count, loff_t *ppos)
440 /* No kernel lock held - none needed ;) */
441 static unsigned int hung_up_tty_poll(struct file *filp, poll_table *wait)
443 return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
446 static long hung_up_tty_ioctl(struct file *file, unsigned int cmd,
449 return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
452 static long hung_up_tty_compat_ioctl(struct file *file,
453 unsigned int cmd, unsigned long arg)
455 return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
458 static const struct file_operations tty_fops = {
463 .unlocked_ioctl = tty_ioctl,
464 .compat_ioctl = tty_compat_ioctl,
466 .release = tty_release,
467 .fasync = tty_fasync,
470 static const struct file_operations console_fops = {
473 .write = redirected_tty_write,
475 .unlocked_ioctl = tty_ioctl,
476 .compat_ioctl = tty_compat_ioctl,
478 .release = tty_release,
479 .fasync = tty_fasync,
482 static const struct file_operations hung_up_tty_fops = {
484 .read = hung_up_tty_read,
485 .write = hung_up_tty_write,
486 .poll = hung_up_tty_poll,
487 .unlocked_ioctl = hung_up_tty_ioctl,
488 .compat_ioctl = hung_up_tty_compat_ioctl,
489 .release = tty_release,
492 static DEFINE_SPINLOCK(redirect_lock);
493 static struct file *redirect;
496 * tty_wakeup - request more data
499 * Internal and external helper for wakeups of tty. This function
500 * informs the line discipline if present that the driver is ready
501 * to receive more output data.
504 void tty_wakeup(struct tty_struct *tty)
506 struct tty_ldisc *ld;
508 if (test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) {
509 ld = tty_ldisc_ref(tty);
511 if (ld->ops->write_wakeup)
512 ld->ops->write_wakeup(tty);
516 wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
519 EXPORT_SYMBOL_GPL(tty_wakeup);
522 * tty_signal_session_leader - sends SIGHUP to session leader
523 * @tty controlling tty
524 * @exit_session if non-zero, signal all foreground group processes
526 * Send SIGHUP and SIGCONT to the session leader and its process group.
527 * Optionally, signal all processes in the foreground process group.
529 * Returns the number of processes in the session with this tty
530 * as their controlling terminal. This value is used to drop
531 * tty references for those processes.
533 static int tty_signal_session_leader(struct tty_struct *tty, int exit_session)
535 struct task_struct *p;
537 struct pid *tty_pgrp = NULL;
539 read_lock(&tasklist_lock);
541 do_each_pid_task(tty->session, PIDTYPE_SID, p) {
542 spin_lock_irq(&p->sighand->siglock);
543 if (p->signal->tty == tty) {
544 p->signal->tty = NULL;
545 /* We defer the dereferences outside fo
549 if (!p->signal->leader) {
550 spin_unlock_irq(&p->sighand->siglock);
553 __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
554 __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
555 put_pid(p->signal->tty_old_pgrp); /* A noop */
556 spin_lock(&tty->ctrl_lock);
557 tty_pgrp = get_pid(tty->pgrp);
559 p->signal->tty_old_pgrp = get_pid(tty->pgrp);
560 spin_unlock(&tty->ctrl_lock);
561 spin_unlock_irq(&p->sighand->siglock);
562 } while_each_pid_task(tty->session, PIDTYPE_SID, p);
564 read_unlock(&tasklist_lock);
568 kill_pgrp(tty_pgrp, SIGHUP, exit_session);
576 * __tty_hangup - actual handler for hangup events
579 * This can be called by a "kworker" kernel thread. That is process
580 * synchronous but doesn't hold any locks, so we need to make sure we
581 * have the appropriate locks for what we're doing.
583 * The hangup event clears any pending redirections onto the hung up
584 * device. It ensures future writes will error and it does the needed
585 * line discipline hangup and signal delivery. The tty object itself
590 * redirect lock for undoing redirection
591 * file list lock for manipulating list of ttys
592 * tty_ldiscs_lock from called functions
593 * termios_rwsem resetting termios data
594 * tasklist_lock to walk task list for hangup event
595 * ->siglock to protect ->signal/->sighand
597 static void __tty_hangup(struct tty_struct *tty, int exit_session)
599 struct file *cons_filp = NULL;
600 struct file *filp, *f = NULL;
601 struct tty_file_private *priv;
602 int closecount = 0, n;
609 spin_lock(&redirect_lock);
610 if (redirect && file_tty(redirect) == tty) {
614 spin_unlock(&redirect_lock);
618 if (test_bit(TTY_HUPPED, &tty->flags)) {
623 /* some functions below drop BTM, so we need this bit */
624 set_bit(TTY_HUPPING, &tty->flags);
626 /* inuse_filps is protected by the single tty lock,
627 this really needs to change if we want to flush the
628 workqueue with the lock held */
629 check_tty_count(tty, "tty_hangup");
631 spin_lock(&tty_files_lock);
632 /* This breaks for file handles being sent over AF_UNIX sockets ? */
633 list_for_each_entry(priv, &tty->tty_files, list) {
635 if (filp->f_op->write == redirected_tty_write)
637 if (filp->f_op->write != tty_write)
640 __tty_fasync(-1, filp, 0); /* can't block */
641 filp->f_op = &hung_up_tty_fops;
643 spin_unlock(&tty_files_lock);
645 refs = tty_signal_session_leader(tty, exit_session);
646 /* Account for the p->signal references we killed */
651 * it drops BTM and thus races with reopen
652 * we protect the race by TTY_HUPPING
654 tty_ldisc_hangup(tty);
656 spin_lock_irq(&tty->ctrl_lock);
657 clear_bit(TTY_THROTTLED, &tty->flags);
658 clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
659 put_pid(tty->session);
663 tty->ctrl_status = 0;
664 spin_unlock_irq(&tty->ctrl_lock);
667 * If one of the devices matches a console pointer, we
668 * cannot just call hangup() because that will cause
669 * tty->count and state->count to go out of sync.
670 * So we just call close() the right number of times.
674 for (n = 0; n < closecount; n++)
675 tty->ops->close(tty, cons_filp);
676 } else if (tty->ops->hangup)
677 tty->ops->hangup(tty);
679 * We don't want to have driver/ldisc interactions beyond
680 * the ones we did here. The driver layer expects no
681 * calls after ->hangup() from the ldisc side. However we
682 * can't yet guarantee all that.
684 set_bit(TTY_HUPPED, &tty->flags);
685 clear_bit(TTY_HUPPING, &tty->flags);
693 static void do_tty_hangup(struct work_struct *work)
695 struct tty_struct *tty =
696 container_of(work, struct tty_struct, hangup_work);
698 __tty_hangup(tty, 0);
702 * tty_hangup - trigger a hangup event
703 * @tty: tty to hangup
705 * A carrier loss (virtual or otherwise) has occurred on this like
706 * schedule a hangup sequence to run after this event.
709 void tty_hangup(struct tty_struct *tty)
711 #ifdef TTY_DEBUG_HANGUP
713 printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf));
715 schedule_work(&tty->hangup_work);
718 EXPORT_SYMBOL(tty_hangup);
721 * tty_vhangup - process vhangup
722 * @tty: tty to hangup
724 * The user has asked via system call for the terminal to be hung up.
725 * We do this synchronously so that when the syscall returns the process
726 * is complete. That guarantee is necessary for security reasons.
729 void tty_vhangup(struct tty_struct *tty)
731 #ifdef TTY_DEBUG_HANGUP
734 printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
736 __tty_hangup(tty, 0);
739 EXPORT_SYMBOL(tty_vhangup);
743 * tty_vhangup_self - process vhangup for own ctty
745 * Perform a vhangup on the current controlling tty
748 void tty_vhangup_self(void)
750 struct tty_struct *tty;
752 tty = get_current_tty();
760 * tty_vhangup_session - hangup session leader exit
761 * @tty: tty to hangup
763 * The session leader is exiting and hanging up its controlling terminal.
764 * Every process in the foreground process group is signalled SIGHUP.
766 * We do this synchronously so that when the syscall returns the process
767 * is complete. That guarantee is necessary for security reasons.
770 static void tty_vhangup_session(struct tty_struct *tty)
772 #ifdef TTY_DEBUG_HANGUP
775 printk(KERN_DEBUG "%s vhangup session...\n", tty_name(tty, buf));
777 __tty_hangup(tty, 1);
781 * tty_hung_up_p - was tty hung up
782 * @filp: file pointer of tty
784 * Return true if the tty has been subject to a vhangup or a carrier
788 int tty_hung_up_p(struct file *filp)
790 return (filp->f_op == &hung_up_tty_fops);
793 EXPORT_SYMBOL(tty_hung_up_p);
795 static void session_clear_tty(struct pid *session)
797 struct task_struct *p;
798 do_each_pid_task(session, PIDTYPE_SID, p) {
800 } while_each_pid_task(session, PIDTYPE_SID, p);
804 * disassociate_ctty - disconnect controlling tty
805 * @on_exit: true if exiting so need to "hang up" the session
807 * This function is typically called only by the session leader, when
808 * it wants to disassociate itself from its controlling tty.
810 * It performs the following functions:
811 * (1) Sends a SIGHUP and SIGCONT to the foreground process group
812 * (2) Clears the tty from being controlling the session
813 * (3) Clears the controlling tty for all processes in the
816 * The argument on_exit is set to 1 if called when a process is
817 * exiting; it is 0 if called by the ioctl TIOCNOTTY.
820 * BTM is taken for hysterical raisins, and held when
821 * called from no_tty().
822 * tty_mutex is taken to protect tty
823 * ->siglock is taken to protect ->signal/->sighand
824 * tasklist_lock is taken to walk process list for sessions
825 * ->siglock is taken to protect ->signal/->sighand
828 void disassociate_ctty(int on_exit)
830 struct tty_struct *tty;
832 if (!current->signal->leader)
835 tty = get_current_tty();
837 if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) {
838 tty_vhangup_session(tty);
840 struct pid *tty_pgrp = tty_get_pgrp(tty);
842 kill_pgrp(tty_pgrp, SIGHUP, on_exit);
844 kill_pgrp(tty_pgrp, SIGCONT, on_exit);
850 } else if (on_exit) {
851 struct pid *old_pgrp;
852 spin_lock_irq(¤t->sighand->siglock);
853 old_pgrp = current->signal->tty_old_pgrp;
854 current->signal->tty_old_pgrp = NULL;
855 spin_unlock_irq(¤t->sighand->siglock);
857 kill_pgrp(old_pgrp, SIGHUP, on_exit);
858 kill_pgrp(old_pgrp, SIGCONT, on_exit);
864 spin_lock_irq(¤t->sighand->siglock);
865 put_pid(current->signal->tty_old_pgrp);
866 current->signal->tty_old_pgrp = NULL;
868 tty = tty_kref_get(current->signal->tty);
871 spin_lock_irqsave(&tty->ctrl_lock, flags);
872 put_pid(tty->session);
876 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
879 #ifdef TTY_DEBUG_HANGUP
880 printk(KERN_DEBUG "error attempted to write to tty [0x%p]"
885 spin_unlock_irq(¤t->sighand->siglock);
886 /* Now clear signal->tty under the lock */
887 read_lock(&tasklist_lock);
888 session_clear_tty(task_session(current));
889 read_unlock(&tasklist_lock);
894 * no_tty - Ensure the current process does not have a controlling tty
898 /* FIXME: Review locking here. The tty_lock never covered any race
899 between a new association and proc_clear_tty but possible we need
900 to protect against this anyway */
901 struct task_struct *tsk = current;
902 disassociate_ctty(0);
908 * stop_tty - propagate flow control
911 * Perform flow control to the driver. May be called
912 * on an already stopped device and will not re-call the driver
915 * This functionality is used by both the line disciplines for
916 * halting incoming flow and by the driver. It may therefore be
917 * called from any context, may be under the tty atomic_write_lock
924 void __stop_tty(struct tty_struct *tty)
930 (tty->ops->stop)(tty);
933 void stop_tty(struct tty_struct *tty)
937 spin_lock_irqsave(&tty->flow_lock, flags);
939 spin_unlock_irqrestore(&tty->flow_lock, flags);
941 EXPORT_SYMBOL(stop_tty);
944 * start_tty - propagate flow control
947 * Start a tty that has been stopped if at all possible. If this
948 * tty was previous stopped and is now being started, the driver
949 * start method is invoked and the line discipline woken.
955 void __start_tty(struct tty_struct *tty)
957 if (!tty->stopped || tty->flow_stopped)
961 (tty->ops->start)(tty);
965 void start_tty(struct tty_struct *tty)
969 spin_lock_irqsave(&tty->flow_lock, flags);
971 spin_unlock_irqrestore(&tty->flow_lock, flags);
973 EXPORT_SYMBOL(start_tty);
975 /* We limit tty time update visibility to every 8 seconds or so. */
976 static void tty_update_time(struct timespec *time)
978 unsigned long sec = get_seconds() & ~7;
979 if ((long)(sec - time->tv_sec) > 0)
984 * tty_read - read method for tty device files
985 * @file: pointer to tty file
987 * @count: size of user buffer
990 * Perform the read system call function on this terminal device. Checks
991 * for hung up devices before calling the line discipline method.
994 * Locks the line discipline internally while needed. Multiple
995 * read calls may be outstanding in parallel.
998 static ssize_t tty_read(struct file *file, char __user *buf, size_t count,
1002 struct inode *inode = file_inode(file);
1003 struct tty_struct *tty = file_tty(file);
1004 struct tty_ldisc *ld;
1006 if (tty_paranoia_check(tty, inode, "tty_read"))
1008 if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
1011 /* We want to wait for the line discipline to sort out in this
1013 ld = tty_ldisc_ref_wait(tty);
1015 i = (ld->ops->read)(tty, file, buf, count);
1018 tty_ldisc_deref(ld);
1021 tty_update_time(&inode->i_atime);
1026 static void tty_write_unlock(struct tty_struct *tty)
1027 __releases(&tty->atomic_write_lock)
1029 mutex_unlock(&tty->atomic_write_lock);
1030 wake_up_interruptible_poll(&tty->write_wait, POLLOUT);
1033 static int tty_write_lock(struct tty_struct *tty, int ndelay)
1034 __acquires(&tty->atomic_write_lock)
1036 if (!mutex_trylock(&tty->atomic_write_lock)) {
1039 if (mutex_lock_interruptible(&tty->atomic_write_lock))
1040 return -ERESTARTSYS;
1046 * Split writes up in sane blocksizes to avoid
1047 * denial-of-service type attacks
1049 static inline ssize_t do_tty_write(
1050 ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t),
1051 struct tty_struct *tty,
1053 const char __user *buf,
1056 ssize_t ret, written = 0;
1059 ret = tty_write_lock(tty, file->f_flags & O_NDELAY);
1064 * We chunk up writes into a temporary buffer. This
1065 * simplifies low-level drivers immensely, since they
1066 * don't have locking issues and user mode accesses.
1068 * But if TTY_NO_WRITE_SPLIT is set, we should use a
1071 * The default chunk-size is 2kB, because the NTTY
1072 * layer has problems with bigger chunks. It will
1073 * claim to be able to handle more characters than
1076 * FIXME: This can probably go away now except that 64K chunks
1077 * are too likely to fail unless switched to vmalloc...
1080 if (test_bit(TTY_NO_WRITE_SPLIT, &tty->flags))
1085 /* write_buf/write_cnt is protected by the atomic_write_lock mutex */
1086 if (tty->write_cnt < chunk) {
1087 unsigned char *buf_chunk;
1092 buf_chunk = kmalloc(chunk, GFP_KERNEL);
1097 kfree(tty->write_buf);
1098 tty->write_cnt = chunk;
1099 tty->write_buf = buf_chunk;
1102 /* Do the write .. */
1104 size_t size = count;
1108 if (copy_from_user(tty->write_buf, buf, size))
1110 ret = write(tty, file, tty->write_buf, size);
1119 if (signal_pending(current))
1124 tty_update_time(&file_inode(file)->i_mtime);
1128 tty_write_unlock(tty);
1133 * tty_write_message - write a message to a certain tty, not just the console.
1134 * @tty: the destination tty_struct
1135 * @msg: the message to write
1137 * This is used for messages that need to be redirected to a specific tty.
1138 * We don't put it into the syslog queue right now maybe in the future if
1141 * We must still hold the BTM and test the CLOSING flag for the moment.
1144 void tty_write_message(struct tty_struct *tty, char *msg)
1147 mutex_lock(&tty->atomic_write_lock);
1149 if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) {
1151 tty->ops->write(tty, msg, strlen(msg));
1154 tty_write_unlock(tty);
1161 * tty_write - write method for tty device file
1162 * @file: tty file pointer
1163 * @buf: user data to write
1164 * @count: bytes to write
1167 * Write data to a tty device via the line discipline.
1170 * Locks the line discipline as required
1171 * Writes to the tty driver are serialized by the atomic_write_lock
1172 * and are then processed in chunks to the device. The line discipline
1173 * write method will not be invoked in parallel for each device.
1176 static ssize_t tty_write(struct file *file, const char __user *buf,
1177 size_t count, loff_t *ppos)
1179 struct tty_struct *tty = file_tty(file);
1180 struct tty_ldisc *ld;
1183 if (tty_paranoia_check(tty, file_inode(file), "tty_write"))
1185 if (!tty || !tty->ops->write ||
1186 (test_bit(TTY_IO_ERROR, &tty->flags)))
1188 /* Short term debug to catch buggy drivers */
1189 if (tty->ops->write_room == NULL)
1190 printk(KERN_ERR "tty driver %s lacks a write_room method.\n",
1192 ld = tty_ldisc_ref_wait(tty);
1193 if (!ld->ops->write)
1196 ret = do_tty_write(ld->ops->write, tty, file, buf, count);
1197 tty_ldisc_deref(ld);
1201 ssize_t redirected_tty_write(struct file *file, const char __user *buf,
1202 size_t count, loff_t *ppos)
1204 struct file *p = NULL;
1206 spin_lock(&redirect_lock);
1208 p = get_file(redirect);
1209 spin_unlock(&redirect_lock);
1213 res = vfs_write(p, buf, count, &p->f_pos);
1217 return tty_write(file, buf, count, ppos);
1221 * tty_send_xchar - send priority character
1223 * Send a high priority character to the tty even if stopped
1225 * Locking: none for xchar method, write ordering for write method.
1228 int tty_send_xchar(struct tty_struct *tty, char ch)
1230 int was_stopped = tty->stopped;
1232 if (tty->ops->send_xchar) {
1233 tty->ops->send_xchar(tty, ch);
1237 if (tty_write_lock(tty, 0) < 0)
1238 return -ERESTARTSYS;
1242 tty->ops->write(tty, &ch, 1);
1245 tty_write_unlock(tty);
1249 static char ptychar[] = "pqrstuvwxyzabcde";
1252 * pty_line_name - generate name for a pty
1253 * @driver: the tty driver in use
1254 * @index: the minor number
1255 * @p: output buffer of at least 6 bytes
1257 * Generate a name from a driver reference and write it to the output
1262 static void pty_line_name(struct tty_driver *driver, int index, char *p)
1264 int i = index + driver->name_base;
1265 /* ->name is initialized to "ttyp", but "tty" is expected */
1266 sprintf(p, "%s%c%x",
1267 driver->subtype == PTY_TYPE_SLAVE ? "tty" : driver->name,
1268 ptychar[i >> 4 & 0xf], i & 0xf);
1272 * tty_line_name - generate name for a tty
1273 * @driver: the tty driver in use
1274 * @index: the minor number
1275 * @p: output buffer of at least 7 bytes
1277 * Generate a name from a driver reference and write it to the output
1282 static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p)
1284 if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE)
1285 return sprintf(p, "%s", driver->name);
1287 return sprintf(p, "%s%d", driver->name,
1288 index + driver->name_base);
1292 * tty_driver_lookup_tty() - find an existing tty, if any
1293 * @driver: the driver for the tty
1294 * @idx: the minor number
1296 * Return the tty, if found or ERR_PTR() otherwise.
1298 * Locking: tty_mutex must be held. If tty is found, the mutex must
1299 * be held until the 'fast-open' is also done. Will change once we
1300 * have refcounting in the driver and per driver locking
1302 static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver,
1303 struct inode *inode, int idx)
1305 if (driver->ops->lookup)
1306 return driver->ops->lookup(driver, inode, idx);
1308 return driver->ttys[idx];
1312 * tty_init_termios - helper for termios setup
1313 * @tty: the tty to set up
1315 * Initialise the termios structures for this tty. Thus runs under
1316 * the tty_mutex currently so we can be relaxed about ordering.
1319 int tty_init_termios(struct tty_struct *tty)
1321 struct ktermios *tp;
1322 int idx = tty->index;
1324 if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
1325 tty->termios = tty->driver->init_termios;
1327 /* Check for lazy saved data */
1328 tp = tty->driver->termios[idx];
1332 tty->termios = tty->driver->init_termios;
1334 /* Compatibility until drivers always set this */
1335 tty->termios.c_ispeed = tty_termios_input_baud_rate(&tty->termios);
1336 tty->termios.c_ospeed = tty_termios_baud_rate(&tty->termios);
1339 EXPORT_SYMBOL_GPL(tty_init_termios);
1341 int tty_standard_install(struct tty_driver *driver, struct tty_struct *tty)
1343 int ret = tty_init_termios(tty);
1347 tty_driver_kref_get(driver);
1349 driver->ttys[tty->index] = tty;
1352 EXPORT_SYMBOL_GPL(tty_standard_install);
1355 * tty_driver_install_tty() - install a tty entry in the driver
1356 * @driver: the driver for the tty
1359 * Install a tty object into the driver tables. The tty->index field
1360 * will be set by the time this is called. This method is responsible
1361 * for ensuring any need additional structures are allocated and
1364 * Locking: tty_mutex for now
1366 static int tty_driver_install_tty(struct tty_driver *driver,
1367 struct tty_struct *tty)
1369 return driver->ops->install ? driver->ops->install(driver, tty) :
1370 tty_standard_install(driver, tty);
1374 * tty_driver_remove_tty() - remove a tty from the driver tables
1375 * @driver: the driver for the tty
1376 * @idx: the minor number
1378 * Remvoe a tty object from the driver tables. The tty->index field
1379 * will be set by the time this is called.
1381 * Locking: tty_mutex for now
1383 void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *tty)
1385 if (driver->ops->remove)
1386 driver->ops->remove(driver, tty);
1388 driver->ttys[tty->index] = NULL;
1392 * tty_reopen() - fast re-open of an open tty
1393 * @tty - the tty to open
1395 * Return 0 on success, -errno on error.
1397 * Locking: tty_mutex must be held from the time the tty was found
1398 * till this open completes.
1400 static int tty_reopen(struct tty_struct *tty)
1402 struct tty_driver *driver = tty->driver;
1404 if (test_bit(TTY_CLOSING, &tty->flags) ||
1405 test_bit(TTY_HUPPING, &tty->flags))
1408 if (driver->type == TTY_DRIVER_TYPE_PTY &&
1409 driver->subtype == PTY_TYPE_MASTER) {
1411 * special case for PTY masters: only one open permitted,
1412 * and the slave side open count is incremented as well.
1421 WARN_ON(!tty->ldisc);
1427 * tty_init_dev - initialise a tty device
1428 * @driver: tty driver we are opening a device on
1429 * @idx: device index
1430 * @ret_tty: returned tty structure
1432 * Prepare a tty device. This may not be a "new" clean device but
1433 * could also be an active device. The pty drivers require special
1434 * handling because of this.
1437 * The function is called under the tty_mutex, which
1438 * protects us from the tty struct or driver itself going away.
1440 * On exit the tty device has the line discipline attached and
1441 * a reference count of 1. If a pair was created for pty/tty use
1442 * and the other was a pty master then it too has a reference count of 1.
1444 * WSH 06/09/97: Rewritten to remove races and properly clean up after a
1445 * failed open. The new code protects the open with a mutex, so it's
1446 * really quite straightforward. The mutex locking can probably be
1447 * relaxed for the (most common) case of reopening a tty.
1450 struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
1452 struct tty_struct *tty;
1456 * First time open is complex, especially for PTY devices.
1457 * This code guarantees that either everything succeeds and the
1458 * TTY is ready for operation, or else the table slots are vacated
1459 * and the allocated memory released. (Except that the termios
1460 * and locked termios may be retained.)
1463 if (!try_module_get(driver->owner))
1464 return ERR_PTR(-ENODEV);
1466 tty = alloc_tty_struct(driver, idx);
1469 goto err_module_put;
1473 retval = tty_driver_install_tty(driver, tty);
1475 goto err_deinit_tty;
1478 tty->port = driver->ports[idx];
1480 WARN_RATELIMIT(!tty->port,
1481 "%s: %s driver does not set tty->port. This will crash the kernel later. Fix the driver!\n",
1482 __func__, tty->driver->name);
1484 tty->port->itty = tty;
1487 * Structures all installed ... call the ldisc open routines.
1488 * If we fail here just call release_tty to clean up. No need
1489 * to decrement the use counts, as release_tty doesn't care.
1491 retval = tty_ldisc_setup(tty, tty->link);
1493 goto err_release_tty;
1494 /* Return the tty locked so that it cannot vanish under the caller */
1499 deinitialize_tty_struct(tty);
1500 free_tty_struct(tty);
1502 module_put(driver->owner);
1503 return ERR_PTR(retval);
1505 /* call the tty release_tty routine to clean out this slot */
1508 printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, "
1509 "clearing slot %d\n", idx);
1510 release_tty(tty, idx);
1511 return ERR_PTR(retval);
1514 void tty_free_termios(struct tty_struct *tty)
1516 struct ktermios *tp;
1517 int idx = tty->index;
1519 /* If the port is going to reset then it has no termios to save */
1520 if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS)
1523 /* Stash the termios data */
1524 tp = tty->driver->termios[idx];
1526 tp = kmalloc(sizeof(struct ktermios), GFP_KERNEL);
1528 pr_warn("tty: no memory to save termios state.\n");
1531 tty->driver->termios[idx] = tp;
1535 EXPORT_SYMBOL(tty_free_termios);
1538 * tty_flush_works - flush all works of a tty
1539 * @tty: tty device to flush works for
1541 * Sync flush all works belonging to @tty.
1543 static void tty_flush_works(struct tty_struct *tty)
1545 flush_work(&tty->SAK_work);
1546 flush_work(&tty->hangup_work);
1550 * release_one_tty - release tty structure memory
1551 * @kref: kref of tty we are obliterating
1553 * Releases memory associated with a tty structure, and clears out the
1554 * driver table slots. This function is called when a device is no longer
1555 * in use. It also gets called when setup of a device fails.
1558 * takes the file list lock internally when working on the list
1559 * of ttys that the driver keeps.
1561 * This method gets called from a work queue so that the driver private
1562 * cleanup ops can sleep (needed for USB at least)
1564 static void release_one_tty(struct work_struct *work)
1566 struct tty_struct *tty =
1567 container_of(work, struct tty_struct, hangup_work);
1568 struct tty_driver *driver = tty->driver;
1569 struct module *owner = driver->owner;
1571 if (tty->ops->cleanup)
1572 tty->ops->cleanup(tty);
1575 tty_driver_kref_put(driver);
1578 spin_lock(&tty_files_lock);
1579 list_del_init(&tty->tty_files);
1580 spin_unlock(&tty_files_lock);
1583 put_pid(tty->session);
1584 free_tty_struct(tty);
1587 static void queue_release_one_tty(struct kref *kref)
1589 struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
1591 /* The hangup queue is now free so we can reuse it rather than
1592 waste a chunk of memory for each port */
1593 INIT_WORK(&tty->hangup_work, release_one_tty);
1594 schedule_work(&tty->hangup_work);
1598 * tty_kref_put - release a tty kref
1601 * Release a reference to a tty device and if need be let the kref
1602 * layer destruct the object for us
1605 void tty_kref_put(struct tty_struct *tty)
1608 kref_put(&tty->kref, queue_release_one_tty);
1610 EXPORT_SYMBOL(tty_kref_put);
1613 * release_tty - release tty structure memory
1615 * Release both @tty and a possible linked partner (think pty pair),
1616 * and decrement the refcount of the backing module.
1620 * takes the file list lock internally when working on the list
1621 * of ttys that the driver keeps.
1624 static void release_tty(struct tty_struct *tty, int idx)
1626 /* This should always be true but check for the moment */
1627 WARN_ON(tty->index != idx);
1628 WARN_ON(!mutex_is_locked(&tty_mutex));
1629 if (tty->ops->shutdown)
1630 tty->ops->shutdown(tty);
1631 tty_free_termios(tty);
1632 tty_driver_remove_tty(tty->driver, tty);
1633 tty->port->itty = NULL;
1635 tty->link->port->itty = NULL;
1636 cancel_work_sync(&tty->port->buf.work);
1639 tty_kref_put(tty->link);
1644 * tty_release_checks - check a tty before real release
1645 * @tty: tty to check
1646 * @o_tty: link of @tty (if any)
1647 * @idx: index of the tty
1649 * Performs some paranoid checking before true release of the @tty.
1650 * This is a no-op unless TTY_PARANOIA_CHECK is defined.
1652 static int tty_release_checks(struct tty_struct *tty, struct tty_struct *o_tty,
1655 #ifdef TTY_PARANOIA_CHECK
1656 if (idx < 0 || idx >= tty->driver->num) {
1657 printk(KERN_DEBUG "%s: bad idx when trying to free (%s)\n",
1658 __func__, tty->name);
1662 /* not much to check for devpts */
1663 if (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)
1666 if (tty != tty->driver->ttys[idx]) {
1667 printk(KERN_DEBUG "%s: driver.table[%d] not tty for (%s)\n",
1668 __func__, idx, tty->name);
1671 if (tty->driver->other) {
1672 if (o_tty != tty->driver->other->ttys[idx]) {
1673 printk(KERN_DEBUG "%s: other->table[%d] not o_tty for (%s)\n",
1674 __func__, idx, tty->name);
1677 if (o_tty->link != tty) {
1678 printk(KERN_DEBUG "%s: bad pty pointers\n", __func__);
1687 * tty_release - vfs callback for close
1688 * @inode: inode of tty
1689 * @filp: file pointer for handle to tty
1691 * Called the last time each file handle is closed that references
1692 * this tty. There may however be several such references.
1695 * Takes bkl. See tty_release_dev
1697 * Even releasing the tty structures is a tricky business.. We have
1698 * to be very careful that the structures are all released at the
1699 * same time, as interrupts might otherwise get the wrong pointers.
1701 * WSH 09/09/97: rewritten to avoid some nasty race conditions that could
1702 * lead to double frees or releasing memory still in use.
1705 int tty_release(struct inode *inode, struct file *filp)
1707 struct tty_struct *tty = file_tty(filp);
1708 struct tty_struct *o_tty;
1709 int pty_master, tty_closing, o_tty_closing, do_sleep;
1713 if (tty_paranoia_check(tty, inode, __func__))
1717 check_tty_count(tty, __func__);
1719 __tty_fasync(-1, filp, 0);
1722 pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
1723 tty->driver->subtype == PTY_TYPE_MASTER);
1724 /* Review: parallel close */
1727 if (tty_release_checks(tty, o_tty, idx)) {
1732 #ifdef TTY_DEBUG_HANGUP
1733 printk(KERN_DEBUG "%s: %s (tty count=%d)...\n", __func__,
1734 tty_name(tty, buf), tty->count);
1737 if (tty->ops->close)
1738 tty->ops->close(tty, filp);
1742 * Sanity check: if tty->count is going to zero, there shouldn't be
1743 * any waiters on tty->read_wait or tty->write_wait. We test the
1744 * wait queues and kick everyone out _before_ actually starting to
1745 * close. This ensures that we won't block while releasing the tty
1748 * The test for the o_tty closing is necessary, since the master and
1749 * slave sides may close in any order. If the slave side closes out
1750 * first, its count will be one, since the master side holds an open.
1751 * Thus this test wouldn't be triggered at the time the slave closes,
1754 * Note that it's possible for the tty to be opened again while we're
1755 * flushing out waiters. By recalculating the closing flags before
1756 * each iteration we avoid any problems.
1759 /* Guard against races with tty->count changes elsewhere and
1760 opens on /dev/tty */
1762 mutex_lock(&tty_mutex);
1763 tty_lock_pair(tty, o_tty);
1764 tty_closing = tty->count <= 1;
1765 o_tty_closing = o_tty &&
1766 (o_tty->count <= (pty_master ? 1 : 0));
1770 if (waitqueue_active(&tty->read_wait)) {
1771 wake_up_poll(&tty->read_wait, POLLIN);
1774 if (waitqueue_active(&tty->write_wait)) {
1775 wake_up_poll(&tty->write_wait, POLLOUT);
1779 if (o_tty_closing) {
1780 if (waitqueue_active(&o_tty->read_wait)) {
1781 wake_up_poll(&o_tty->read_wait, POLLIN);
1784 if (waitqueue_active(&o_tty->write_wait)) {
1785 wake_up_poll(&o_tty->write_wait, POLLOUT);
1792 printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
1793 __func__, tty_name(tty, buf));
1794 tty_unlock_pair(tty, o_tty);
1795 mutex_unlock(&tty_mutex);
1800 * The closing flags are now consistent with the open counts on
1801 * both sides, and we've completed the last operation that could
1802 * block, so it's safe to proceed with closing.
1804 * We must *not* drop the tty_mutex until we ensure that a further
1805 * entry into tty_open can not pick up this tty.
1808 if (--o_tty->count < 0) {
1809 printk(KERN_WARNING "%s: bad pty slave count (%d) for %s\n",
1810 __func__, o_tty->count, tty_name(o_tty, buf));
1814 if (--tty->count < 0) {
1815 printk(KERN_WARNING "%s: bad tty->count (%d) for %s\n",
1816 __func__, tty->count, tty_name(tty, buf));
1821 * We've decremented tty->count, so we need to remove this file
1822 * descriptor off the tty->tty_files list; this serves two
1824 * - check_tty_count sees the correct number of file descriptors
1825 * associated with this tty.
1826 * - do_tty_hangup no longer sees this file descriptor as
1827 * something that needs to be handled for hangups.
1832 * Perform some housekeeping before deciding whether to return.
1834 * Set the TTY_CLOSING flag if this was the last open. In the
1835 * case of a pty we may have to wait around for the other side
1836 * to close, and TTY_CLOSING makes sure we can't be reopened.
1839 set_bit(TTY_CLOSING, &tty->flags);
1841 set_bit(TTY_CLOSING, &o_tty->flags);
1844 * If _either_ side is closing, make sure there aren't any
1845 * processes that still think tty or o_tty is their controlling
1848 if (tty_closing || o_tty_closing) {
1849 read_lock(&tasklist_lock);
1850 session_clear_tty(tty->session);
1852 session_clear_tty(o_tty->session);
1853 read_unlock(&tasklist_lock);
1856 mutex_unlock(&tty_mutex);
1857 tty_unlock_pair(tty, o_tty);
1858 /* At this point the TTY_CLOSING flag should ensure a dead tty
1859 cannot be re-opened by a racing opener */
1861 /* check whether both sides are closing ... */
1862 if (!tty_closing || (o_tty && !o_tty_closing))
1865 #ifdef TTY_DEBUG_HANGUP
1866 printk(KERN_DEBUG "%s: %s: final close\n", __func__, tty_name(tty, buf));
1869 * Ask the line discipline code to release its structures
1871 tty_ldisc_release(tty, o_tty);
1873 /* Wait for pending work before tty destruction commmences */
1874 tty_flush_works(tty);
1876 tty_flush_works(o_tty);
1878 #ifdef TTY_DEBUG_HANGUP
1879 printk(KERN_DEBUG "%s: %s: freeing structure...\n", __func__, tty_name(tty, buf));
1882 * The release_tty function takes care of the details of clearing
1883 * the slots and preserving the termios structure. The tty_unlock_pair
1884 * should be safe as we keep a kref while the tty is locked (so the
1885 * unlock never unlocks a freed tty).
1887 mutex_lock(&tty_mutex);
1888 release_tty(tty, idx);
1889 mutex_unlock(&tty_mutex);
1895 * tty_open_current_tty - get tty of current task for open
1896 * @device: device number
1897 * @filp: file pointer to tty
1898 * @return: tty of the current task iff @device is /dev/tty
1900 * We cannot return driver and index like for the other nodes because
1901 * devpts will not work then. It expects inodes to be from devpts FS.
1903 * We need to move to returning a refcounted object from all the lookup
1904 * paths including this one.
1906 static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp)
1908 struct tty_struct *tty;
1910 if (device != MKDEV(TTYAUX_MAJOR, 0))
1913 tty = get_current_tty();
1915 return ERR_PTR(-ENXIO);
1917 filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
1920 /* FIXME: we put a reference and return a TTY! */
1921 /* This is only safe because the caller holds tty_mutex */
1926 * tty_lookup_driver - lookup a tty driver for a given device file
1927 * @device: device number
1928 * @filp: file pointer to tty
1929 * @noctty: set if the device should not become a controlling tty
1930 * @index: index for the device in the @return driver
1931 * @return: driver for this inode (with increased refcount)
1933 * If @return is not erroneous, the caller is responsible to decrement the
1934 * refcount by tty_driver_kref_put.
1936 * Locking: tty_mutex protects get_tty_driver
1938 static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp,
1939 int *noctty, int *index)
1941 struct tty_driver *driver;
1945 case MKDEV(TTY_MAJOR, 0): {
1946 extern struct tty_driver *console_driver;
1947 driver = tty_driver_kref_get(console_driver);
1948 *index = fg_console;
1953 case MKDEV(TTYAUX_MAJOR, 1): {
1954 struct tty_driver *console_driver = console_device(index);
1955 if (console_driver) {
1956 driver = tty_driver_kref_get(console_driver);
1958 /* Don't let /dev/console block */
1959 filp->f_flags |= O_NONBLOCK;
1964 return ERR_PTR(-ENODEV);
1967 driver = get_tty_driver(device, index);
1969 return ERR_PTR(-ENODEV);
1976 * tty_open - open a tty device
1977 * @inode: inode of device file
1978 * @filp: file pointer to tty
1980 * tty_open and tty_release keep up the tty count that contains the
1981 * number of opens done on a tty. We cannot use the inode-count, as
1982 * different inodes might point to the same tty.
1984 * Open-counting is needed for pty masters, as well as for keeping
1985 * track of serial lines: DTR is dropped when the last close happens.
1986 * (This is not done solely through tty->count, now. - Ted 1/27/92)
1988 * The termios state of a pty is reset on first open so that
1989 * settings don't persist across reuse.
1991 * Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev.
1992 * tty->count should protect the rest.
1993 * ->siglock protects ->signal/->sighand
1995 * Note: the tty_unlock/lock cases without a ref are only safe due to
1999 static int tty_open(struct inode *inode, struct file *filp)
2001 struct tty_struct *tty;
2003 struct tty_driver *driver = NULL;
2005 dev_t device = inode->i_rdev;
2006 unsigned saved_flags = filp->f_flags;
2008 nonseekable_open(inode, filp);
2011 retval = tty_alloc_file(filp);
2015 noctty = filp->f_flags & O_NOCTTY;
2019 mutex_lock(&tty_mutex);
2020 /* This is protected by the tty_mutex */
2021 tty = tty_open_current_tty(device, filp);
2023 retval = PTR_ERR(tty);
2026 driver = tty_lookup_driver(device, filp, &noctty, &index);
2027 if (IS_ERR(driver)) {
2028 retval = PTR_ERR(driver);
2032 /* check whether we're reopening an existing tty */
2033 tty = tty_driver_lookup_tty(driver, inode, index);
2035 retval = PTR_ERR(tty);
2042 retval = tty_reopen(tty);
2045 tty = ERR_PTR(retval);
2047 } else /* Returns with the tty_lock held for now */
2048 tty = tty_init_dev(driver, index);
2050 mutex_unlock(&tty_mutex);
2052 tty_driver_kref_put(driver);
2054 retval = PTR_ERR(tty);
2058 tty_add_file(tty, filp);
2060 check_tty_count(tty, __func__);
2061 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2062 tty->driver->subtype == PTY_TYPE_MASTER)
2064 #ifdef TTY_DEBUG_HANGUP
2065 printk(KERN_DEBUG "%s: opening %s...\n", __func__, tty->name);
2068 retval = tty->ops->open(tty, filp);
2071 filp->f_flags = saved_flags;
2073 if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) &&
2074 !capable(CAP_SYS_ADMIN))
2078 #ifdef TTY_DEBUG_HANGUP
2079 printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__,
2082 tty_unlock(tty); /* need to call tty_release without BTM */
2083 tty_release(inode, filp);
2084 if (retval != -ERESTARTSYS)
2087 if (signal_pending(current))
2092 * Need to reset f_op in case a hangup happened.
2094 if (filp->f_op == &hung_up_tty_fops)
2095 filp->f_op = &tty_fops;
2098 clear_bit(TTY_HUPPED, &tty->flags);
2102 mutex_lock(&tty_mutex);
2104 spin_lock_irq(¤t->sighand->siglock);
2106 current->signal->leader &&
2107 !current->signal->tty &&
2108 tty->session == NULL)
2109 __proc_set_tty(current, tty);
2110 spin_unlock_irq(¤t->sighand->siglock);
2112 mutex_unlock(&tty_mutex);
2115 mutex_unlock(&tty_mutex);
2116 /* after locks to avoid deadlock */
2117 if (!IS_ERR_OR_NULL(driver))
2118 tty_driver_kref_put(driver);
2120 tty_free_file(filp);
2127 * tty_poll - check tty status
2128 * @filp: file being polled
2129 * @wait: poll wait structures to update
2131 * Call the line discipline polling method to obtain the poll
2132 * status of the device.
2134 * Locking: locks called line discipline but ldisc poll method
2135 * may be re-entered freely by other callers.
2138 static unsigned int tty_poll(struct file *filp, poll_table *wait)
2140 struct tty_struct *tty = file_tty(filp);
2141 struct tty_ldisc *ld;
2144 if (tty_paranoia_check(tty, file_inode(filp), "tty_poll"))
2147 ld = tty_ldisc_ref_wait(tty);
2149 ret = (ld->ops->poll)(tty, filp, wait);
2150 tty_ldisc_deref(ld);
2154 static int __tty_fasync(int fd, struct file *filp, int on)
2156 struct tty_struct *tty = file_tty(filp);
2157 struct tty_ldisc *ldisc;
2158 unsigned long flags;
2161 if (tty_paranoia_check(tty, file_inode(filp), "tty_fasync"))
2164 retval = fasync_helper(fd, filp, on, &tty->fasync);
2168 ldisc = tty_ldisc_ref(tty);
2170 if (ldisc->ops->fasync)
2171 ldisc->ops->fasync(tty, on);
2172 tty_ldisc_deref(ldisc);
2179 spin_lock_irqsave(&tty->ctrl_lock, flags);
2182 type = PIDTYPE_PGID;
2184 pid = task_pid(current);
2188 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2189 __f_setown(filp, pid, type, 0);
2197 static int tty_fasync(int fd, struct file *filp, int on)
2199 struct tty_struct *tty = file_tty(filp);
2203 retval = __tty_fasync(fd, filp, on);
2210 * tiocsti - fake input character
2211 * @tty: tty to fake input into
2212 * @p: pointer to character
2214 * Fake input to a tty device. Does the necessary locking and
2217 * FIXME: does not honour flow control ??
2220 * Called functions take tty_ldiscs_lock
2221 * current->signal->tty check is safe without locks
2223 * FIXME: may race normal receive processing
2226 static int tiocsti(struct tty_struct *tty, char __user *p)
2229 struct tty_ldisc *ld;
2231 if ((current->signal->tty != tty) && !capable(CAP_SYS_ADMIN))
2233 if (get_user(ch, p))
2235 tty_audit_tiocsti(tty, ch);
2236 ld = tty_ldisc_ref_wait(tty);
2237 ld->ops->receive_buf(tty, &ch, &mbz, 1);
2238 tty_ldisc_deref(ld);
2243 * tiocgwinsz - implement window query ioctl
2245 * @arg: user buffer for result
2247 * Copies the kernel idea of the window size into the user buffer.
2249 * Locking: tty->winsize_mutex is taken to ensure the winsize data
2253 static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg)
2257 mutex_lock(&tty->winsize_mutex);
2258 err = copy_to_user(arg, &tty->winsize, sizeof(*arg));
2259 mutex_unlock(&tty->winsize_mutex);
2261 return err ? -EFAULT: 0;
2265 * tty_do_resize - resize event
2266 * @tty: tty being resized
2267 * @rows: rows (character)
2268 * @cols: cols (character)
2270 * Update the termios variables and send the necessary signals to
2271 * peform a terminal resize correctly
2274 int tty_do_resize(struct tty_struct *tty, struct winsize *ws)
2277 unsigned long flags;
2280 mutex_lock(&tty->winsize_mutex);
2281 if (!memcmp(ws, &tty->winsize, sizeof(*ws)))
2283 /* Get the PID values and reference them so we can
2284 avoid holding the tty ctrl lock while sending signals */
2285 spin_lock_irqsave(&tty->ctrl_lock, flags);
2286 pgrp = get_pid(tty->pgrp);
2287 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2290 kill_pgrp(pgrp, SIGWINCH, 1);
2295 mutex_unlock(&tty->winsize_mutex);
2298 EXPORT_SYMBOL(tty_do_resize);
2301 * tiocswinsz - implement window size set ioctl
2302 * @tty; tty side of tty
2303 * @arg: user buffer for result
2305 * Copies the user idea of the window size to the kernel. Traditionally
2306 * this is just advisory information but for the Linux console it
2307 * actually has driver level meaning and triggers a VC resize.
2310 * Driver dependent. The default do_resize method takes the
2311 * tty termios mutex and ctrl_lock. The console takes its own lock
2312 * then calls into the default method.
2315 static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
2317 struct winsize tmp_ws;
2318 if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
2321 if (tty->ops->resize)
2322 return tty->ops->resize(tty, &tmp_ws);
2324 return tty_do_resize(tty, &tmp_ws);
2328 * tioccons - allow admin to move logical console
2329 * @file: the file to become console
2331 * Allow the administrator to move the redirected console device
2333 * Locking: uses redirect_lock to guard the redirect information
2336 static int tioccons(struct file *file)
2338 if (!capable(CAP_SYS_ADMIN))
2340 if (file->f_op->write == redirected_tty_write) {
2342 spin_lock(&redirect_lock);
2345 spin_unlock(&redirect_lock);
2350 spin_lock(&redirect_lock);
2352 spin_unlock(&redirect_lock);
2355 redirect = get_file(file);
2356 spin_unlock(&redirect_lock);
2361 * fionbio - non blocking ioctl
2362 * @file: file to set blocking value
2363 * @p: user parameter
2365 * Historical tty interfaces had a blocking control ioctl before
2366 * the generic functionality existed. This piece of history is preserved
2367 * in the expected tty API of posix OS's.
2369 * Locking: none, the open file handle ensures it won't go away.
2372 static int fionbio(struct file *file, int __user *p)
2376 if (get_user(nonblock, p))
2379 spin_lock(&file->f_lock);
2381 file->f_flags |= O_NONBLOCK;
2383 file->f_flags &= ~O_NONBLOCK;
2384 spin_unlock(&file->f_lock);
2389 * tiocsctty - set controlling tty
2390 * @tty: tty structure
2391 * @arg: user argument
2393 * This ioctl is used to manage job control. It permits a session
2394 * leader to set this tty as the controlling tty for the session.
2397 * Takes tty_mutex() to protect tty instance
2398 * Takes tasklist_lock internally to walk sessions
2399 * Takes ->siglock() when updating signal->tty
2402 static int tiocsctty(struct tty_struct *tty, int arg)
2405 if (current->signal->leader && (task_session(current) == tty->session))
2408 mutex_lock(&tty_mutex);
2410 * The process must be a session leader and
2411 * not have a controlling tty already.
2413 if (!current->signal->leader || current->signal->tty) {
2420 * This tty is already the controlling
2421 * tty for another session group!
2423 if (arg == 1 && capable(CAP_SYS_ADMIN)) {
2427 read_lock(&tasklist_lock);
2428 session_clear_tty(tty->session);
2429 read_unlock(&tasklist_lock);
2435 proc_set_tty(current, tty);
2437 mutex_unlock(&tty_mutex);
2442 * tty_get_pgrp - return a ref counted pgrp pid
2445 * Returns a refcounted instance of the pid struct for the process
2446 * group controlling the tty.
2449 struct pid *tty_get_pgrp(struct tty_struct *tty)
2451 unsigned long flags;
2454 spin_lock_irqsave(&tty->ctrl_lock, flags);
2455 pgrp = get_pid(tty->pgrp);
2456 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2460 EXPORT_SYMBOL_GPL(tty_get_pgrp);
2463 * tiocgpgrp - get process group
2464 * @tty: tty passed by user
2465 * @real_tty: tty side of the tty passed by the user if a pty else the tty
2468 * Obtain the process group of the tty. If there is no process group
2471 * Locking: none. Reference to current->signal->tty is safe.
2474 static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
2479 * (tty == real_tty) is a cheap way of
2480 * testing if the tty is NOT a master pty.
2482 if (tty == real_tty && current->signal->tty != real_tty)
2484 pid = tty_get_pgrp(real_tty);
2485 ret = put_user(pid_vnr(pid), p);
2491 * tiocspgrp - attempt to set process group
2492 * @tty: tty passed by user
2493 * @real_tty: tty side device matching tty passed by user
2496 * Set the process group of the tty to the session passed. Only
2497 * permitted where the tty session is our session.
2499 * Locking: RCU, ctrl lock
2502 static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
2506 int retval = tty_check_change(real_tty);
2507 unsigned long flags;
2513 if (!current->signal->tty ||
2514 (current->signal->tty != real_tty) ||
2515 (real_tty->session != task_session(current)))
2517 if (get_user(pgrp_nr, p))
2522 pgrp = find_vpid(pgrp_nr);
2527 if (session_of_pgrp(pgrp) != task_session(current))
2530 spin_lock_irqsave(&tty->ctrl_lock, flags);
2531 put_pid(real_tty->pgrp);
2532 real_tty->pgrp = get_pid(pgrp);
2533 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
2540 * tiocgsid - get session id
2541 * @tty: tty passed by user
2542 * @real_tty: tty side of the tty passed by the user if a pty else the tty
2543 * @p: pointer to returned session id
2545 * Obtain the session id of the tty. If there is no session
2548 * Locking: none. Reference to current->signal->tty is safe.
2551 static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
2554 * (tty == real_tty) is a cheap way of
2555 * testing if the tty is NOT a master pty.
2557 if (tty == real_tty && current->signal->tty != real_tty)
2559 if (!real_tty->session)
2561 return put_user(pid_vnr(real_tty->session), p);
2565 * tiocsetd - set line discipline
2567 * @p: pointer to user data
2569 * Set the line discipline according to user request.
2571 * Locking: see tty_set_ldisc, this function is just a helper
2574 static int tiocsetd(struct tty_struct *tty, int __user *p)
2579 if (get_user(ldisc, p))
2582 ret = tty_set_ldisc(tty, ldisc);
2588 * send_break - performed time break
2589 * @tty: device to break on
2590 * @duration: timeout in mS
2592 * Perform a timed break on hardware that lacks its own driver level
2593 * timed break functionality.
2596 * atomic_write_lock serializes
2600 static int send_break(struct tty_struct *tty, unsigned int duration)
2604 if (tty->ops->break_ctl == NULL)
2607 if (tty->driver->flags & TTY_DRIVER_HARDWARE_BREAK)
2608 retval = tty->ops->break_ctl(tty, duration);
2610 /* Do the work ourselves */
2611 if (tty_write_lock(tty, 0) < 0)
2613 retval = tty->ops->break_ctl(tty, -1);
2616 if (!signal_pending(current))
2617 msleep_interruptible(duration);
2618 retval = tty->ops->break_ctl(tty, 0);
2620 tty_write_unlock(tty);
2621 if (signal_pending(current))
2628 * tty_tiocmget - get modem status
2630 * @file: user file pointer
2631 * @p: pointer to result
2633 * Obtain the modem status bits from the tty driver if the feature
2634 * is supported. Return -EINVAL if it is not available.
2636 * Locking: none (up to the driver)
2639 static int tty_tiocmget(struct tty_struct *tty, int __user *p)
2641 int retval = -EINVAL;
2643 if (tty->ops->tiocmget) {
2644 retval = tty->ops->tiocmget(tty);
2647 retval = put_user(retval, p);
2653 * tty_tiocmset - set modem status
2655 * @cmd: command - clear bits, set bits or set all
2656 * @p: pointer to desired bits
2658 * Set the modem status bits from the tty driver if the feature
2659 * is supported. Return -EINVAL if it is not available.
2661 * Locking: none (up to the driver)
2664 static int tty_tiocmset(struct tty_struct *tty, unsigned int cmd,
2668 unsigned int set, clear, val;
2670 if (tty->ops->tiocmset == NULL)
2673 retval = get_user(val, p);
2689 set &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
2690 clear &= TIOCM_DTR|TIOCM_RTS|TIOCM_OUT1|TIOCM_OUT2|TIOCM_LOOP;
2691 return tty->ops->tiocmset(tty, set, clear);
2694 static int tty_tiocgicount(struct tty_struct *tty, void __user *arg)
2696 int retval = -EINVAL;
2697 struct serial_icounter_struct icount;
2698 memset(&icount, 0, sizeof(icount));
2699 if (tty->ops->get_icount)
2700 retval = tty->ops->get_icount(tty, &icount);
2703 if (copy_to_user(arg, &icount, sizeof(icount)))
2708 struct tty_struct *tty_pair_get_tty(struct tty_struct *tty)
2710 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2711 tty->driver->subtype == PTY_TYPE_MASTER)
2715 EXPORT_SYMBOL(tty_pair_get_tty);
2717 struct tty_struct *tty_pair_get_pty(struct tty_struct *tty)
2719 if (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
2720 tty->driver->subtype == PTY_TYPE_MASTER)
2724 EXPORT_SYMBOL(tty_pair_get_pty);
2727 * Split this up, as gcc can choke on it otherwise..
2729 long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
2731 struct tty_struct *tty = file_tty(file);
2732 struct tty_struct *real_tty;
2733 void __user *p = (void __user *)arg;
2735 struct tty_ldisc *ld;
2737 if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl"))
2740 real_tty = tty_pair_get_tty(tty);
2743 * Factor out some common prep work
2751 retval = tty_check_change(tty);
2754 if (cmd != TIOCCBRK) {
2755 tty_wait_until_sent(tty, 0);
2756 if (signal_pending(current))
2767 return tiocsti(tty, p);
2769 return tiocgwinsz(real_tty, p);
2771 return tiocswinsz(real_tty, p);
2773 return real_tty != tty ? -EINVAL : tioccons(file);
2775 return fionbio(file, p);
2777 set_bit(TTY_EXCLUSIVE, &tty->flags);
2780 clear_bit(TTY_EXCLUSIVE, &tty->flags);
2784 int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
2785 return put_user(excl, (int __user *)p);
2788 if (current->signal->tty != tty)
2793 return tiocsctty(tty, arg);
2795 return tiocgpgrp(tty, real_tty, p);
2797 return tiocspgrp(tty, real_tty, p);
2799 return tiocgsid(tty, real_tty, p);
2801 return put_user(tty->ldisc->ops->num, (int __user *)p);
2803 return tiocsetd(tty, p);
2805 if (!capable(CAP_SYS_ADMIN))
2811 unsigned int ret = new_encode_dev(tty_devnum(real_tty));
2812 return put_user(ret, (unsigned int __user *)p);
2817 case TIOCSBRK: /* Turn break on, unconditionally */
2818 if (tty->ops->break_ctl)
2819 return tty->ops->break_ctl(tty, -1);
2821 case TIOCCBRK: /* Turn break off, unconditionally */
2822 if (tty->ops->break_ctl)
2823 return tty->ops->break_ctl(tty, 0);
2825 case TCSBRK: /* SVID version: non-zero arg --> no break */
2826 /* non-zero arg means wait for all output data
2827 * to be sent (performed above) but don't send break.
2828 * This is used by the tcdrain() termios function.
2831 return send_break(tty, 250);
2833 case TCSBRKP: /* support for POSIX tcsendbreak() */
2834 return send_break(tty, arg ? arg*100 : 250);
2837 return tty_tiocmget(tty, p);
2841 return tty_tiocmset(tty, cmd, p);
2843 retval = tty_tiocgicount(tty, p);
2844 /* For the moment allow fall through to the old method */
2845 if (retval != -EINVAL)
2852 /* flush tty buffer and allow ldisc to process ioctl */
2853 tty_buffer_flush(tty);
2858 if (tty->ops->ioctl) {
2859 retval = (tty->ops->ioctl)(tty, cmd, arg);
2860 if (retval != -ENOIOCTLCMD)
2863 ld = tty_ldisc_ref_wait(tty);
2865 if (ld->ops->ioctl) {
2866 retval = ld->ops->ioctl(tty, file, cmd, arg);
2867 if (retval == -ENOIOCTLCMD)
2870 tty_ldisc_deref(ld);
2874 #ifdef CONFIG_COMPAT
2875 static long tty_compat_ioctl(struct file *file, unsigned int cmd,
2878 struct tty_struct *tty = file_tty(file);
2879 struct tty_ldisc *ld;
2880 int retval = -ENOIOCTLCMD;
2882 if (tty_paranoia_check(tty, file_inode(file), "tty_ioctl"))
2885 if (tty->ops->compat_ioctl) {
2886 retval = (tty->ops->compat_ioctl)(tty, cmd, arg);
2887 if (retval != -ENOIOCTLCMD)
2891 ld = tty_ldisc_ref_wait(tty);
2892 if (ld->ops->compat_ioctl)
2893 retval = ld->ops->compat_ioctl(tty, file, cmd, arg);
2895 retval = n_tty_compat_ioctl_helper(tty, file, cmd, arg);
2896 tty_ldisc_deref(ld);
2902 static int this_tty(const void *t, struct file *file, unsigned fd)
2904 if (likely(file->f_op->read != tty_read))
2906 return file_tty(file) != t ? 0 : fd + 1;
2910 * This implements the "Secure Attention Key" --- the idea is to
2911 * prevent trojan horses by killing all processes associated with this
2912 * tty when the user hits the "Secure Attention Key". Required for
2913 * super-paranoid applications --- see the Orange Book for more details.
2915 * This code could be nicer; ideally it should send a HUP, wait a few
2916 * seconds, then send a INT, and then a KILL signal. But you then
2917 * have to coordinate with the init process, since all processes associated
2918 * with the current tty must be dead before the new getty is allowed
2921 * Now, if it would be correct ;-/ The current code has a nasty hole -
2922 * it doesn't catch files in flight. We may send the descriptor to ourselves
2923 * via AF_UNIX socket, close it and later fetch from socket. FIXME.
2925 * Nasty bug: do_SAK is being called in interrupt context. This can
2926 * deadlock. We punt it up to process context. AKPM - 16Mar2001
2928 void __do_SAK(struct tty_struct *tty)
2933 struct task_struct *g, *p;
2934 struct pid *session;
2939 session = tty->session;
2941 tty_ldisc_flush(tty);
2943 tty_driver_flush_buffer(tty);
2945 read_lock(&tasklist_lock);
2946 /* Kill the entire session */
2947 do_each_pid_task(session, PIDTYPE_SID, p) {
2948 printk(KERN_NOTICE "SAK: killed process %d"
2949 " (%s): task_session(p)==tty->session\n",
2950 task_pid_nr(p), p->comm);
2951 send_sig(SIGKILL, p, 1);
2952 } while_each_pid_task(session, PIDTYPE_SID, p);
2953 /* Now kill any processes that happen to have the
2956 do_each_thread(g, p) {
2957 if (p->signal->tty == tty) {
2958 printk(KERN_NOTICE "SAK: killed process %d"
2959 " (%s): task_session(p)==tty->session\n",
2960 task_pid_nr(p), p->comm);
2961 send_sig(SIGKILL, p, 1);
2965 i = iterate_fd(p->files, 0, this_tty, tty);
2967 printk(KERN_NOTICE "SAK: killed process %d"
2968 " (%s): fd#%d opened to the tty\n",
2969 task_pid_nr(p), p->comm, i - 1);
2970 force_sig(SIGKILL, p);
2973 } while_each_thread(g, p);
2974 read_unlock(&tasklist_lock);
2978 static void do_SAK_work(struct work_struct *work)
2980 struct tty_struct *tty =
2981 container_of(work, struct tty_struct, SAK_work);
2986 * The tq handling here is a little racy - tty->SAK_work may already be queued.
2987 * Fortunately we don't need to worry, because if ->SAK_work is already queued,
2988 * the values which we write to it will be identical to the values which it
2989 * already has. --akpm
2991 void do_SAK(struct tty_struct *tty)
2995 schedule_work(&tty->SAK_work);
2998 EXPORT_SYMBOL(do_SAK);
3000 static int dev_match_devt(struct device *dev, const void *data)
3002 const dev_t *devt = data;
3003 return dev->devt == *devt;
3006 /* Must put_device() after it's unused! */
3007 static struct device *tty_get_device(struct tty_struct *tty)
3009 dev_t devt = tty_devnum(tty);
3010 return class_find_device(tty_class, NULL, &devt, dev_match_devt);
3017 * This subroutine allocates and initializes a tty structure.
3019 * Locking: none - tty in question is not exposed at this point
3022 struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx)
3024 struct tty_struct *tty;
3026 tty = kzalloc(sizeof(*tty), GFP_KERNEL);
3030 kref_init(&tty->kref);
3031 tty->magic = TTY_MAGIC;
3032 tty_ldisc_init(tty);
3033 tty->session = NULL;
3035 mutex_init(&tty->legacy_mutex);
3036 mutex_init(&tty->throttle_mutex);
3037 init_rwsem(&tty->termios_rwsem);
3038 mutex_init(&tty->winsize_mutex);
3039 init_ldsem(&tty->ldisc_sem);
3040 init_waitqueue_head(&tty->write_wait);
3041 init_waitqueue_head(&tty->read_wait);
3042 INIT_WORK(&tty->hangup_work, do_tty_hangup);
3043 mutex_init(&tty->atomic_write_lock);
3044 spin_lock_init(&tty->ctrl_lock);
3045 spin_lock_init(&tty->flow_lock);
3046 INIT_LIST_HEAD(&tty->tty_files);
3047 INIT_WORK(&tty->SAK_work, do_SAK_work);
3049 tty->driver = driver;
3050 tty->ops = driver->ops;
3052 tty_line_name(driver, idx, tty->name);
3053 tty->dev = tty_get_device(tty);
3059 * deinitialize_tty_struct
3060 * @tty: tty to deinitialize
3062 * This subroutine deinitializes a tty structure that has been newly
3063 * allocated but tty_release cannot be called on that yet.
3065 * Locking: none - tty in question must not be exposed at this point
3067 void deinitialize_tty_struct(struct tty_struct *tty)
3069 tty_ldisc_deinit(tty);
3073 * tty_put_char - write one character to a tty
3077 * Write one byte to the tty using the provided put_char method
3078 * if present. Returns the number of characters successfully output.
3080 * Note: the specific put_char operation in the driver layer may go
3081 * away soon. Don't call it directly, use this method
3084 int tty_put_char(struct tty_struct *tty, unsigned char ch)
3086 if (tty->ops->put_char)
3087 return tty->ops->put_char(tty, ch);
3088 return tty->ops->write(tty, &ch, 1);
3090 EXPORT_SYMBOL_GPL(tty_put_char);
3092 struct class *tty_class;
3094 static int tty_cdev_add(struct tty_driver *driver, dev_t dev,
3095 unsigned int index, unsigned int count)
3097 /* init here, since reused cdevs cause crashes */
3098 cdev_init(&driver->cdevs[index], &tty_fops);
3099 driver->cdevs[index].owner = driver->owner;
3100 return cdev_add(&driver->cdevs[index], dev, count);
3104 * tty_register_device - register a tty device
3105 * @driver: the tty driver that describes the tty device
3106 * @index: the index in the tty driver for this tty device
3107 * @device: a struct device that is associated with this tty device.
3108 * This field is optional, if there is no known struct device
3109 * for this tty device it can be set to NULL safely.
3111 * Returns a pointer to the struct device for this tty device
3112 * (or ERR_PTR(-EFOO) on error).
3114 * This call is required to be made to register an individual tty device
3115 * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
3116 * that bit is not set, this function should not be called by a tty
3122 struct device *tty_register_device(struct tty_driver *driver, unsigned index,
3123 struct device *device)
3125 return tty_register_device_attr(driver, index, device, NULL, NULL);
3127 EXPORT_SYMBOL(tty_register_device);
3129 static void tty_device_create_release(struct device *dev)
3131 pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
3136 * tty_register_device_attr - register a tty device
3137 * @driver: the tty driver that describes the tty device
3138 * @index: the index in the tty driver for this tty device
3139 * @device: a struct device that is associated with this tty device.
3140 * This field is optional, if there is no known struct device
3141 * for this tty device it can be set to NULL safely.
3142 * @drvdata: Driver data to be set to device.
3143 * @attr_grp: Attribute group to be set on device.
3145 * Returns a pointer to the struct device for this tty device
3146 * (or ERR_PTR(-EFOO) on error).
3148 * This call is required to be made to register an individual tty device
3149 * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If
3150 * that bit is not set, this function should not be called by a tty
3155 struct device *tty_register_device_attr(struct tty_driver *driver,
3156 unsigned index, struct device *device,
3158 const struct attribute_group **attr_grp)
3161 dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
3162 struct device *dev = NULL;
3163 int retval = -ENODEV;
3166 if (index >= driver->num) {
3167 printk(KERN_ERR "Attempt to register invalid tty line number "
3169 return ERR_PTR(-EINVAL);
3172 if (driver->type == TTY_DRIVER_TYPE_PTY)
3173 pty_line_name(driver, index, name);
3175 tty_line_name(driver, index, name);
3177 if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3178 retval = tty_cdev_add(driver, devt, index, 1);
3184 dev = kzalloc(sizeof(*dev), GFP_KERNEL);
3191 dev->class = tty_class;
3192 dev->parent = device;
3193 dev->release = tty_device_create_release;
3194 dev_set_name(dev, "%s", name);
3195 dev->groups = attr_grp;
3196 dev_set_drvdata(dev, drvdata);
3198 retval = device_register(dev);
3207 cdev_del(&driver->cdevs[index]);
3208 return ERR_PTR(retval);
3210 EXPORT_SYMBOL_GPL(tty_register_device_attr);
3213 * tty_unregister_device - unregister a tty device
3214 * @driver: the tty driver that describes the tty device
3215 * @index: the index in the tty driver for this tty device
3217 * If a tty device is registered with a call to tty_register_device() then
3218 * this function must be called when the tty device is gone.
3223 void tty_unregister_device(struct tty_driver *driver, unsigned index)
3225 device_destroy(tty_class,
3226 MKDEV(driver->major, driver->minor_start) + index);
3227 if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC))
3228 cdev_del(&driver->cdevs[index]);
3230 EXPORT_SYMBOL(tty_unregister_device);
3233 * __tty_alloc_driver -- allocate tty driver
3234 * @lines: count of lines this driver can handle at most
3235 * @owner: module which is repsonsible for this driver
3236 * @flags: some of TTY_DRIVER_* flags, will be set in driver->flags
3238 * This should not be called directly, some of the provided macros should be
3239 * used instead. Use IS_ERR and friends on @retval.
3241 struct tty_driver *__tty_alloc_driver(unsigned int lines, struct module *owner,
3242 unsigned long flags)
3244 struct tty_driver *driver;
3245 unsigned int cdevs = 1;
3248 if (!lines || (flags & TTY_DRIVER_UNNUMBERED_NODE && lines > 1))
3249 return ERR_PTR(-EINVAL);
3251 driver = kzalloc(sizeof(struct tty_driver), GFP_KERNEL);
3253 return ERR_PTR(-ENOMEM);
3255 kref_init(&driver->kref);
3256 driver->magic = TTY_DRIVER_MAGIC;
3257 driver->num = lines;
3258 driver->owner = owner;
3259 driver->flags = flags;
3261 if (!(flags & TTY_DRIVER_DEVPTS_MEM)) {
3262 driver->ttys = kcalloc(lines, sizeof(*driver->ttys),
3264 driver->termios = kcalloc(lines, sizeof(*driver->termios),
3266 if (!driver->ttys || !driver->termios) {
3272 if (!(flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
3273 driver->ports = kcalloc(lines, sizeof(*driver->ports),
3275 if (!driver->ports) {
3282 driver->cdevs = kcalloc(cdevs, sizeof(*driver->cdevs), GFP_KERNEL);
3283 if (!driver->cdevs) {
3290 kfree(driver->ports);
3291 kfree(driver->ttys);
3292 kfree(driver->termios);
3294 return ERR_PTR(err);
3296 EXPORT_SYMBOL(__tty_alloc_driver);
3298 static void destruct_tty_driver(struct kref *kref)
3300 struct tty_driver *driver = container_of(kref, struct tty_driver, kref);
3302 struct ktermios *tp;
3304 if (driver->flags & TTY_DRIVER_INSTALLED) {
3306 * Free the termios and termios_locked structures because
3307 * we don't want to get memory leaks when modular tty
3308 * drivers are removed from the kernel.
3310 for (i = 0; i < driver->num; i++) {
3311 tp = driver->termios[i];
3313 driver->termios[i] = NULL;
3316 if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV))
3317 tty_unregister_device(driver, i);
3319 proc_tty_unregister_driver(driver);
3320 if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)
3321 cdev_del(&driver->cdevs[0]);
3323 kfree(driver->cdevs);
3324 kfree(driver->ports);
3325 kfree(driver->termios);
3326 kfree(driver->ttys);
3330 void tty_driver_kref_put(struct tty_driver *driver)
3332 kref_put(&driver->kref, destruct_tty_driver);
3334 EXPORT_SYMBOL(tty_driver_kref_put);
3336 void tty_set_operations(struct tty_driver *driver,
3337 const struct tty_operations *op)
3341 EXPORT_SYMBOL(tty_set_operations);
3343 void put_tty_driver(struct tty_driver *d)
3345 tty_driver_kref_put(d);
3347 EXPORT_SYMBOL(put_tty_driver);
3350 * Called by a tty driver to register itself.
3352 int tty_register_driver(struct tty_driver *driver)
3359 if (!driver->major) {
3360 error = alloc_chrdev_region(&dev, driver->minor_start,
3361 driver->num, driver->name);
3363 driver->major = MAJOR(dev);
3364 driver->minor_start = MINOR(dev);
3367 dev = MKDEV(driver->major, driver->minor_start);
3368 error = register_chrdev_region(dev, driver->num, driver->name);
3373 if (driver->flags & TTY_DRIVER_DYNAMIC_ALLOC) {
3374 error = tty_cdev_add(driver, dev, 0, driver->num);
3376 goto err_unreg_char;
3379 mutex_lock(&tty_mutex);
3380 list_add(&driver->tty_drivers, &tty_drivers);
3381 mutex_unlock(&tty_mutex);
3383 if (!(driver->flags & TTY_DRIVER_DYNAMIC_DEV)) {
3384 for (i = 0; i < driver->num; i++) {
3385 d = tty_register_device(driver, i, NULL);
3388 goto err_unreg_devs;
3392 proc_tty_register_driver(driver);
3393 driver->flags |= TTY_DRIVER_INSTALLED;
3397 for (i--; i >= 0; i--)
3398 tty_unregister_device(driver, i);
3400 mutex_lock(&tty_mutex);
3401 list_del(&driver->tty_drivers);
3402 mutex_unlock(&tty_mutex);
3405 unregister_chrdev_region(dev, driver->num);
3409 EXPORT_SYMBOL(tty_register_driver);
3412 * Called by a tty driver to unregister itself.
3414 int tty_unregister_driver(struct tty_driver *driver)
3418 if (driver->refcount)
3421 unregister_chrdev_region(MKDEV(driver->major, driver->minor_start),
3423 mutex_lock(&tty_mutex);
3424 list_del(&driver->tty_drivers);
3425 mutex_unlock(&tty_mutex);
3429 EXPORT_SYMBOL(tty_unregister_driver);
3431 dev_t tty_devnum(struct tty_struct *tty)
3433 return MKDEV(tty->driver->major, tty->driver->minor_start) + tty->index;
3435 EXPORT_SYMBOL(tty_devnum);
3437 void proc_clear_tty(struct task_struct *p)
3439 unsigned long flags;
3440 struct tty_struct *tty;
3441 spin_lock_irqsave(&p->sighand->siglock, flags);
3442 tty = p->signal->tty;
3443 p->signal->tty = NULL;
3444 spin_unlock_irqrestore(&p->sighand->siglock, flags);
3448 /* Called under the sighand lock */
3450 static void __proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
3453 unsigned long flags;
3454 /* We should not have a session or pgrp to put here but.... */
3455 spin_lock_irqsave(&tty->ctrl_lock, flags);
3456 put_pid(tty->session);
3458 tty->pgrp = get_pid(task_pgrp(tsk));
3459 spin_unlock_irqrestore(&tty->ctrl_lock, flags);
3460 tty->session = get_pid(task_session(tsk));
3461 if (tsk->signal->tty) {
3462 printk(KERN_DEBUG "tty not NULL!!\n");
3463 tty_kref_put(tsk->signal->tty);
3466 put_pid(tsk->signal->tty_old_pgrp);
3467 tsk->signal->tty = tty_kref_get(tty);
3468 tsk->signal->tty_old_pgrp = NULL;
3471 static void proc_set_tty(struct task_struct *tsk, struct tty_struct *tty)
3473 spin_lock_irq(&tsk->sighand->siglock);
3474 __proc_set_tty(tsk, tty);
3475 spin_unlock_irq(&tsk->sighand->siglock);
3478 struct tty_struct *get_current_tty(void)
3480 struct tty_struct *tty;
3481 unsigned long flags;
3483 spin_lock_irqsave(¤t->sighand->siglock, flags);
3484 tty = tty_kref_get(current->signal->tty);
3485 spin_unlock_irqrestore(¤t->sighand->siglock, flags);
3488 EXPORT_SYMBOL_GPL(get_current_tty);
3490 void tty_default_fops(struct file_operations *fops)
3496 * Initialize the console device. This is called *early*, so
3497 * we can't necessarily depend on lots of kernel help here.
3498 * Just do some early initializations, and do the complex setup
3501 void __init console_init(void)
3505 /* Setup the default TTY line discipline. */
3509 * set up the console device so that later boot sequences can
3510 * inform about problems etc..
3512 call = __con_initcall_start;
3513 while (call < __con_initcall_end) {
3519 static char *tty_devnode(struct device *dev, umode_t *mode)
3523 if (dev->devt == MKDEV(TTYAUX_MAJOR, 0) ||
3524 dev->devt == MKDEV(TTYAUX_MAJOR, 2))
3529 static int __init tty_class_init(void)
3531 tty_class = class_create(THIS_MODULE, "tty");
3532 if (IS_ERR(tty_class))
3533 return PTR_ERR(tty_class);
3534 tty_class->devnode = tty_devnode;
3538 postcore_initcall(tty_class_init);
3540 /* 3/2004 jmc: why do these devices exist? */
3541 static struct cdev tty_cdev, console_cdev;
3543 static ssize_t show_cons_active(struct device *dev,
3544 struct device_attribute *attr, char *buf)
3546 struct console *cs[16];
3552 for_each_console(c) {
3557 if ((c->flags & CON_ENABLED) == 0)
3560 if (i >= ARRAY_SIZE(cs))
3564 int index = cs[i]->index;
3565 struct tty_driver *drv = cs[i]->device(cs[i], &index);
3567 /* don't resolve tty0 as some programs depend on it */
3568 if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR))
3569 count += tty_line_name(drv, index, buf + count);
3571 count += sprintf(buf + count, "%s%d",
3572 cs[i]->name, cs[i]->index);
3574 count += sprintf(buf + count, "%c", i ? ' ':'\n');
3580 static DEVICE_ATTR(active, S_IRUGO, show_cons_active, NULL);
3582 static struct device *consdev;
3584 void console_sysfs_notify(void)
3587 sysfs_notify(&consdev->kobj, NULL, "active");
3591 * Ok, now we can initialize the rest of the tty devices and can count
3592 * on memory allocations, interrupts etc..
3594 int __init tty_init(void)
3596 cdev_init(&tty_cdev, &tty_fops);
3597 if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) ||
3598 register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0)
3599 panic("Couldn't register /dev/tty driver\n");
3600 device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty");
3602 cdev_init(&console_cdev, &console_fops);
3603 if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) ||
3604 register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0)
3605 panic("Couldn't register /dev/console driver\n");
3606 consdev = device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL,
3608 if (IS_ERR(consdev))
3611 WARN_ON(device_create_file(consdev, &dev_attr_active) < 0);
3614 vty_init(&console_fops);