ec6c984d2a6e7c4ca6b60aab70cbd4f923760b51
[firefly-linux-kernel-4.4.55.git] / drivers / usb / chipidea / core.c
1 /*
2  * core.c - ChipIdea USB IP core family device controller
3  *
4  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
5  *
6  * Author: David Lopo
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  */
12
13 /*
14  * Description: ChipIdea USB IP core family device controller
15  *
16  * This driver is composed of several blocks:
17  * - HW:     hardware interface
18  * - DBG:    debug facilities (optional)
19  * - UTIL:   utilities
20  * - ISR:    interrupts handling
21  * - ENDPT:  endpoint operations (Gadget API)
22  * - GADGET: gadget operations (Gadget API)
23  * - BUS:    bus glue code, bus abstraction layer
24  *
25  * Compile Options
26  * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
27  * - STALL_IN:  non-empty bulk-in pipes cannot be halted
28  *              if defined mass storage compliance succeeds but with warnings
29  *              => case 4: Hi >  Dn
30  *              => case 5: Hi >  Di
31  *              => case 8: Hi <> Do
32  *              if undefined usbtest 13 fails
33  * - TRACE:     enable function tracing (depends on DEBUG)
34  *
35  * Main Features
36  * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
37  * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
38  * - Normal & LPM support
39  *
40  * USBTEST Report
41  * - OK: 0-12, 13 (STALL_IN defined) & 14
42  * - Not Supported: 15 & 16 (ISO)
43  *
44  * TODO List
45  * - OTG
46  * - Interrupt Traffic
47  * - GET_STATUS(device) - always reports 0
48  * - Gadget API (majority of optional features)
49  * - Suspend & Remote Wakeup
50  */
51 #include <linux/delay.h>
52 #include <linux/device.h>
53 #include <linux/dma-mapping.h>
54 #include <linux/platform_device.h>
55 #include <linux/module.h>
56 #include <linux/idr.h>
57 #include <linux/interrupt.h>
58 #include <linux/io.h>
59 #include <linux/kernel.h>
60 #include <linux/slab.h>
61 #include <linux/pm_runtime.h>
62 #include <linux/usb/ch9.h>
63 #include <linux/usb/gadget.h>
64 #include <linux/usb/otg.h>
65 #include <linux/usb/chipidea.h>
66 #include <linux/usb/of.h>
67 #include <linux/phy.h>
68 #include <linux/regulator/consumer.h>
69
70 #include "ci.h"
71 #include "udc.h"
72 #include "bits.h"
73 #include "host.h"
74 #include "debug.h"
75 #include "otg.h"
76
77 /* Controller register map */
78 static uintptr_t ci_regs_nolpm[] = {
79         [CAP_CAPLENGTH]         = 0x000UL,
80         [CAP_HCCPARAMS]         = 0x008UL,
81         [CAP_DCCPARAMS]         = 0x024UL,
82         [CAP_TESTMODE]          = 0x038UL,
83         [OP_USBCMD]             = 0x000UL,
84         [OP_USBSTS]             = 0x004UL,
85         [OP_USBINTR]            = 0x008UL,
86         [OP_DEVICEADDR]         = 0x014UL,
87         [OP_ENDPTLISTADDR]      = 0x018UL,
88         [OP_PORTSC]             = 0x044UL,
89         [OP_DEVLC]              = 0x084UL,
90         [OP_OTGSC]              = 0x064UL,
91         [OP_USBMODE]            = 0x068UL,
92         [OP_ENDPTSETUPSTAT]     = 0x06CUL,
93         [OP_ENDPTPRIME]         = 0x070UL,
94         [OP_ENDPTFLUSH]         = 0x074UL,
95         [OP_ENDPTSTAT]          = 0x078UL,
96         [OP_ENDPTCOMPLETE]      = 0x07CUL,
97         [OP_ENDPTCTRL]          = 0x080UL,
98 };
99
100 static uintptr_t ci_regs_lpm[] = {
101         [CAP_CAPLENGTH]         = 0x000UL,
102         [CAP_HCCPARAMS]         = 0x008UL,
103         [CAP_DCCPARAMS]         = 0x024UL,
104         [CAP_TESTMODE]          = 0x0FCUL,
105         [OP_USBCMD]             = 0x000UL,
106         [OP_USBSTS]             = 0x004UL,
107         [OP_USBINTR]            = 0x008UL,
108         [OP_DEVICEADDR]         = 0x014UL,
109         [OP_ENDPTLISTADDR]      = 0x018UL,
110         [OP_PORTSC]             = 0x044UL,
111         [OP_DEVLC]              = 0x084UL,
112         [OP_OTGSC]              = 0x0C4UL,
113         [OP_USBMODE]            = 0x0C8UL,
114         [OP_ENDPTSETUPSTAT]     = 0x0D8UL,
115         [OP_ENDPTPRIME]         = 0x0DCUL,
116         [OP_ENDPTFLUSH]         = 0x0E0UL,
117         [OP_ENDPTSTAT]          = 0x0E4UL,
118         [OP_ENDPTCOMPLETE]      = 0x0E8UL,
119         [OP_ENDPTCTRL]          = 0x0ECUL,
120 };
121
122 static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
123 {
124         int i;
125
126         kfree(ci->hw_bank.regmap);
127
128         ci->hw_bank.regmap = kzalloc((OP_LAST + 1) * sizeof(void *),
129                                      GFP_KERNEL);
130         if (!ci->hw_bank.regmap)
131                 return -ENOMEM;
132
133         for (i = 0; i < OP_ENDPTCTRL; i++)
134                 ci->hw_bank.regmap[i] =
135                         (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
136                         (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
137
138         for (; i <= OP_LAST; i++)
139                 ci->hw_bank.regmap[i] = ci->hw_bank.op +
140                         4 * (i - OP_ENDPTCTRL) +
141                         (is_lpm
142                          ? ci_regs_lpm[OP_ENDPTCTRL]
143                          : ci_regs_nolpm[OP_ENDPTCTRL]);
144
145         return 0;
146 }
147
148 /**
149  * hw_port_test_set: writes port test mode (execute without interruption)
150  * @mode: new value
151  *
152  * This function returns an error code
153  */
154 int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
155 {
156         const u8 TEST_MODE_MAX = 7;
157
158         if (mode > TEST_MODE_MAX)
159                 return -EINVAL;
160
161         hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
162         return 0;
163 }
164
165 /**
166  * hw_port_test_get: reads port test mode value
167  *
168  * This function returns port test mode value
169  */
170 u8 hw_port_test_get(struct ci_hdrc *ci)
171 {
172         return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
173 }
174
175 static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
176 {
177         u32 reg;
178
179         /* bank is a module variable */
180         ci->hw_bank.abs = base;
181
182         ci->hw_bank.cap = ci->hw_bank.abs;
183         ci->hw_bank.cap += ci->platdata->capoffset;
184         ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
185
186         hw_alloc_regmap(ci, false);
187         reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
188                 __ffs(HCCPARAMS_LEN);
189         ci->hw_bank.lpm  = reg;
190         hw_alloc_regmap(ci, !!reg);
191         ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
192         ci->hw_bank.size += OP_LAST;
193         ci->hw_bank.size /= sizeof(u32);
194
195         reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
196                 __ffs(DCCPARAMS_DEN);
197         ci->hw_ep_max = reg * 2;   /* cache hw ENDPT_MAX */
198
199         if (ci->hw_ep_max > ENDPT_MAX)
200                 return -ENODEV;
201
202         /* Disable all interrupts bits */
203         hw_write(ci, OP_USBINTR, 0xffffffff, 0);
204
205         /* Clear all interrupts status bits*/
206         hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
207
208         dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
209                 ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
210
211         /* setup lock mode ? */
212
213         /* ENDPTSETUPSTAT is '0' by default */
214
215         /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
216
217         return 0;
218 }
219
220 static void hw_phymode_configure(struct ci_hdrc *ci)
221 {
222         u32 portsc, lpm, sts;
223
224         switch (ci->platdata->phy_mode) {
225         case USBPHY_INTERFACE_MODE_UTMI:
226                 portsc = PORTSC_PTS(PTS_UTMI);
227                 lpm = DEVLC_PTS(PTS_UTMI);
228                 break;
229         case USBPHY_INTERFACE_MODE_UTMIW:
230                 portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
231                 lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
232                 break;
233         case USBPHY_INTERFACE_MODE_ULPI:
234                 portsc = PORTSC_PTS(PTS_ULPI);
235                 lpm = DEVLC_PTS(PTS_ULPI);
236                 break;
237         case USBPHY_INTERFACE_MODE_SERIAL:
238                 portsc = PORTSC_PTS(PTS_SERIAL);
239                 lpm = DEVLC_PTS(PTS_SERIAL);
240                 sts = 1;
241                 break;
242         case USBPHY_INTERFACE_MODE_HSIC:
243                 portsc = PORTSC_PTS(PTS_HSIC);
244                 lpm = DEVLC_PTS(PTS_HSIC);
245                 break;
246         default:
247                 return;
248         }
249
250         if (ci->hw_bank.lpm) {
251                 hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
252                 hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
253         } else {
254                 hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
255                 hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
256         }
257 }
258
259 /**
260  * hw_device_reset: resets chip (execute without interruption)
261  * @ci: the controller
262   *
263  * This function returns an error code
264  */
265 int hw_device_reset(struct ci_hdrc *ci, u32 mode)
266 {
267         /* should flush & stop before reset */
268         hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
269         hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
270
271         hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
272         while (hw_read(ci, OP_USBCMD, USBCMD_RST))
273                 udelay(10);             /* not RTOS friendly */
274
275         if (ci->platdata->notify_event)
276                 ci->platdata->notify_event(ci,
277                         CI_HDRC_CONTROLLER_RESET_EVENT);
278
279         if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
280                 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
281
282         /* USBMODE should be configured step by step */
283         hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
284         hw_write(ci, OP_USBMODE, USBMODE_CM, mode);
285         /* HW >= 2.3 */
286         hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
287
288         if (hw_read(ci, OP_USBMODE, USBMODE_CM) != mode) {
289                 pr_err("cannot enter in %s mode", ci_role(ci)->name);
290                 pr_err("lpm = %i", ci->hw_bank.lpm);
291                 return -ENODEV;
292         }
293
294         return 0;
295 }
296
297 static irqreturn_t ci_irq(int irq, void *data)
298 {
299         struct ci_hdrc *ci = data;
300         irqreturn_t ret = IRQ_NONE;
301         u32 otgsc = 0;
302
303         if (ci->is_otg)
304                 otgsc = hw_read(ci, OP_OTGSC, ~0);
305
306         if (ci->role != CI_ROLE_END)
307                 ret = ci_role(ci)->irq(ci);
308
309         if (ci->is_otg && (otgsc & OTGSC_IDIS)) {
310                 hw_write(ci, OP_OTGSC, OTGSC_IDIS, OTGSC_IDIS);
311                 disable_irq_nosync(ci->irq);
312                 queue_work(ci->wq, &ci->work);
313                 ret = IRQ_HANDLED;
314         }
315
316         return ret;
317 }
318
319 static int ci_get_platdata(struct device *dev,
320                 struct ci_hdrc_platform_data *platdata)
321 {
322         /* Get the vbus regulator */
323         platdata->reg_vbus = devm_regulator_get(dev, "vbus");
324         if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
325                 return -EPROBE_DEFER;
326         } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
327                 platdata->reg_vbus = NULL; /* no vbus regualator is needed */
328         } else if (IS_ERR(platdata->reg_vbus)) {
329                 dev_err(dev, "Getting regulator error: %ld\n",
330                         PTR_ERR(platdata->reg_vbus));
331                 return PTR_ERR(platdata->reg_vbus);
332         }
333
334         return 0;
335 }
336
337 static DEFINE_IDA(ci_ida);
338
339 struct platform_device *ci_hdrc_add_device(struct device *dev,
340                         struct resource *res, int nres,
341                         struct ci_hdrc_platform_data *platdata)
342 {
343         struct platform_device *pdev;
344         int id, ret;
345
346         ret = ci_get_platdata(dev, platdata);
347         if (ret)
348                 return ERR_PTR(ret);
349
350         id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
351         if (id < 0)
352                 return ERR_PTR(id);
353
354         pdev = platform_device_alloc("ci_hdrc", id);
355         if (!pdev) {
356                 ret = -ENOMEM;
357                 goto put_id;
358         }
359
360         pdev->dev.parent = dev;
361         pdev->dev.dma_mask = dev->dma_mask;
362         pdev->dev.dma_parms = dev->dma_parms;
363         dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
364
365         ret = platform_device_add_resources(pdev, res, nres);
366         if (ret)
367                 goto err;
368
369         ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
370         if (ret)
371                 goto err;
372
373         ret = platform_device_add(pdev);
374         if (ret)
375                 goto err;
376
377         return pdev;
378
379 err:
380         platform_device_put(pdev);
381 put_id:
382         ida_simple_remove(&ci_ida, id);
383         return ERR_PTR(ret);
384 }
385 EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
386
387 void ci_hdrc_remove_device(struct platform_device *pdev)
388 {
389         int id = pdev->id;
390         platform_device_unregister(pdev);
391         ida_simple_remove(&ci_ida, id);
392 }
393 EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
394
395 static inline void ci_role_destroy(struct ci_hdrc *ci)
396 {
397         ci_hdrc_gadget_destroy(ci);
398         ci_hdrc_host_destroy(ci);
399         if (ci->is_otg)
400                 ci_hdrc_otg_destroy(ci);
401 }
402
403 static void ci_get_otg_capable(struct ci_hdrc *ci)
404 {
405         if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
406                 ci->is_otg = false;
407         else
408                 ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
409                                 DCCPARAMS_DC | DCCPARAMS_HC)
410                                         == (DCCPARAMS_DC | DCCPARAMS_HC));
411         if (ci->is_otg) {
412                 dev_dbg(ci->dev, "It is OTG capable controller\n");
413                 ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
414                 ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
415         }
416 }
417
418 static int ci_hdrc_probe(struct platform_device *pdev)
419 {
420         struct device   *dev = &pdev->dev;
421         struct ci_hdrc  *ci;
422         struct resource *res;
423         void __iomem    *base;
424         int             ret;
425         enum usb_dr_mode dr_mode;
426         struct device_node *of_node = dev->of_node ?: dev->parent->of_node;
427
428         if (!dev->platform_data) {
429                 dev_err(dev, "platform data missing\n");
430                 return -ENODEV;
431         }
432
433         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
434         base = devm_ioremap_resource(dev, res);
435         if (IS_ERR(base))
436                 return PTR_ERR(base);
437
438         ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
439         if (!ci) {
440                 dev_err(dev, "can't allocate device\n");
441                 return -ENOMEM;
442         }
443
444         ci->dev = dev;
445         ci->platdata = dev->platform_data;
446         if (ci->platdata->phy)
447                 ci->transceiver = ci->platdata->phy;
448         else
449                 ci->global_phy = true;
450
451         ret = hw_device_init(ci, base);
452         if (ret < 0) {
453                 dev_err(dev, "can't initialize hardware\n");
454                 return -ENODEV;
455         }
456
457         ci->hw_bank.phys = res->start;
458
459         ci->irq = platform_get_irq(pdev, 0);
460         if (ci->irq < 0) {
461                 dev_err(dev, "missing IRQ\n");
462                 return -ENODEV;
463         }
464
465         ci_get_otg_capable(ci);
466
467         if (!ci->platdata->phy_mode)
468                 ci->platdata->phy_mode = of_usb_get_phy_mode(of_node);
469
470         hw_phymode_configure(ci);
471
472         if (!ci->platdata->dr_mode)
473                 ci->platdata->dr_mode = of_usb_get_dr_mode(of_node);
474
475         if (ci->platdata->dr_mode == USB_DR_MODE_UNKNOWN)
476                 ci->platdata->dr_mode = USB_DR_MODE_OTG;
477
478         dr_mode = ci->platdata->dr_mode;
479         /* initialize role(s) before the interrupt is requested */
480         if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
481                 ret = ci_hdrc_host_init(ci);
482                 if (ret)
483                         dev_info(dev, "doesn't support host\n");
484         }
485
486         if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
487                 ret = ci_hdrc_gadget_init(ci);
488                 if (ret)
489                         dev_info(dev, "doesn't support gadget\n");
490         }
491
492         if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
493                 dev_err(dev, "no supported roles\n");
494                 return -ENODEV;
495         }
496
497         if (ci->is_otg) {
498                 ret = ci_hdrc_otg_init(ci);
499                 if (ret) {
500                         dev_err(dev, "init otg fails, ret = %d\n", ret);
501                         goto stop;
502                 }
503         }
504
505         if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
506                 if (ci->is_otg) {
507                         /*
508                          * ID pin needs 1ms debouce time,
509                          * we delay 2ms for safe.
510                          */
511                         mdelay(2);
512                         ci->role = ci_otg_role(ci);
513                         ci_enable_otg_interrupt(ci, OTGSC_IDIE);
514                 } else {
515                         /*
516                          * If the controller is not OTG capable, but support
517                          * role switch, the defalt role is gadget, and the
518                          * user can switch it through debugfs.
519                          */
520                         ci->role = CI_ROLE_GADGET;
521                 }
522         } else {
523                 ci->role = ci->roles[CI_ROLE_HOST]
524                         ? CI_ROLE_HOST
525                         : CI_ROLE_GADGET;
526         }
527
528         ret = ci_role_start(ci, ci->role);
529         if (ret) {
530                 dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
531                 goto stop;
532         }
533
534         platform_set_drvdata(pdev, ci);
535         ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name,
536                           ci);
537         if (ret)
538                 goto stop;
539
540         ret = dbg_create_files(ci);
541         if (!ret)
542                 return 0;
543
544         free_irq(ci->irq, ci);
545 stop:
546         ci_role_destroy(ci);
547
548         return ret;
549 }
550
551 static int ci_hdrc_remove(struct platform_device *pdev)
552 {
553         struct ci_hdrc *ci = platform_get_drvdata(pdev);
554
555         dbg_remove_files(ci);
556         free_irq(ci->irq, ci);
557         ci_role_destroy(ci);
558
559         return 0;
560 }
561
562 static struct platform_driver ci_hdrc_driver = {
563         .probe  = ci_hdrc_probe,
564         .remove = ci_hdrc_remove,
565         .driver = {
566                 .name   = "ci_hdrc",
567         },
568 };
569
570 module_platform_driver(ci_hdrc_driver);
571
572 MODULE_ALIAS("platform:ci_hdrc");
573 MODULE_LICENSE("GPL v2");
574 MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
575 MODULE_DESCRIPTION("ChipIdea HDRC Driver");