2 * core.c - ChipIdea USB IP core family device controller
4 * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
14 * Description: ChipIdea USB IP core family device controller
16 * This driver is composed of several blocks:
17 * - HW: hardware interface
18 * - DBG: debug facilities (optional)
20 * - ISR: interrupts handling
21 * - ENDPT: endpoint operations (Gadget API)
22 * - GADGET: gadget operations (Gadget API)
23 * - BUS: bus glue code, bus abstraction layer
26 * - CONFIG_USB_GADGET_DEBUG_FILES: enable debug facilities
27 * - STALL_IN: non-empty bulk-in pipes cannot be halted
28 * if defined mass storage compliance succeeds but with warnings
32 * if undefined usbtest 13 fails
33 * - TRACE: enable function tracing (depends on DEBUG)
36 * - Chapter 9 & Mass Storage Compliance with Gadget File Storage
37 * - Chapter 9 Compliance with Gadget Zero (STALL_IN undefined)
38 * - Normal & LPM support
41 * - OK: 0-12, 13 (STALL_IN defined) & 14
42 * - Not Supported: 15 & 16 (ISO)
47 * - GET_STATUS(device) - always reports 0
48 * - Gadget API (majority of optional features)
49 * - Suspend & Remote Wakeup
51 #include <linux/delay.h>
52 #include <linux/device.h>
53 #include <linux/dma-mapping.h>
54 #include <linux/platform_device.h>
55 #include <linux/module.h>
56 #include <linux/idr.h>
57 #include <linux/interrupt.h>
59 #include <linux/kernel.h>
60 #include <linux/slab.h>
61 #include <linux/pm_runtime.h>
62 #include <linux/usb/ch9.h>
63 #include <linux/usb/gadget.h>
64 #include <linux/usb/otg.h>
65 #include <linux/usb/chipidea.h>
66 #include <linux/usb/of.h>
67 #include <linux/phy.h>
68 #include <linux/regulator/consumer.h>
77 /* Controller register map */
78 static uintptr_t ci_regs_nolpm[] = {
79 [CAP_CAPLENGTH] = 0x000UL,
80 [CAP_HCCPARAMS] = 0x008UL,
81 [CAP_DCCPARAMS] = 0x024UL,
82 [CAP_TESTMODE] = 0x038UL,
83 [OP_USBCMD] = 0x000UL,
84 [OP_USBSTS] = 0x004UL,
85 [OP_USBINTR] = 0x008UL,
86 [OP_DEVICEADDR] = 0x014UL,
87 [OP_ENDPTLISTADDR] = 0x018UL,
88 [OP_PORTSC] = 0x044UL,
91 [OP_USBMODE] = 0x068UL,
92 [OP_ENDPTSETUPSTAT] = 0x06CUL,
93 [OP_ENDPTPRIME] = 0x070UL,
94 [OP_ENDPTFLUSH] = 0x074UL,
95 [OP_ENDPTSTAT] = 0x078UL,
96 [OP_ENDPTCOMPLETE] = 0x07CUL,
97 [OP_ENDPTCTRL] = 0x080UL,
100 static uintptr_t ci_regs_lpm[] = {
101 [CAP_CAPLENGTH] = 0x000UL,
102 [CAP_HCCPARAMS] = 0x008UL,
103 [CAP_DCCPARAMS] = 0x024UL,
104 [CAP_TESTMODE] = 0x0FCUL,
105 [OP_USBCMD] = 0x000UL,
106 [OP_USBSTS] = 0x004UL,
107 [OP_USBINTR] = 0x008UL,
108 [OP_DEVICEADDR] = 0x014UL,
109 [OP_ENDPTLISTADDR] = 0x018UL,
110 [OP_PORTSC] = 0x044UL,
111 [OP_DEVLC] = 0x084UL,
112 [OP_OTGSC] = 0x0C4UL,
113 [OP_USBMODE] = 0x0C8UL,
114 [OP_ENDPTSETUPSTAT] = 0x0D8UL,
115 [OP_ENDPTPRIME] = 0x0DCUL,
116 [OP_ENDPTFLUSH] = 0x0E0UL,
117 [OP_ENDPTSTAT] = 0x0E4UL,
118 [OP_ENDPTCOMPLETE] = 0x0E8UL,
119 [OP_ENDPTCTRL] = 0x0ECUL,
122 static int hw_alloc_regmap(struct ci_hdrc *ci, bool is_lpm)
126 kfree(ci->hw_bank.regmap);
128 ci->hw_bank.regmap = kzalloc((OP_LAST + 1) * sizeof(void *),
130 if (!ci->hw_bank.regmap)
133 for (i = 0; i < OP_ENDPTCTRL; i++)
134 ci->hw_bank.regmap[i] =
135 (i <= CAP_LAST ? ci->hw_bank.cap : ci->hw_bank.op) +
136 (is_lpm ? ci_regs_lpm[i] : ci_regs_nolpm[i]);
138 for (; i <= OP_LAST; i++)
139 ci->hw_bank.regmap[i] = ci->hw_bank.op +
140 4 * (i - OP_ENDPTCTRL) +
142 ? ci_regs_lpm[OP_ENDPTCTRL]
143 : ci_regs_nolpm[OP_ENDPTCTRL]);
149 * hw_port_test_set: writes port test mode (execute without interruption)
152 * This function returns an error code
154 int hw_port_test_set(struct ci_hdrc *ci, u8 mode)
156 const u8 TEST_MODE_MAX = 7;
158 if (mode > TEST_MODE_MAX)
161 hw_write(ci, OP_PORTSC, PORTSC_PTC, mode << __ffs(PORTSC_PTC));
166 * hw_port_test_get: reads port test mode value
168 * This function returns port test mode value
170 u8 hw_port_test_get(struct ci_hdrc *ci)
172 return hw_read(ci, OP_PORTSC, PORTSC_PTC) >> __ffs(PORTSC_PTC);
175 /* The PHY enters/leaves low power mode */
176 static void ci_hdrc_enter_lpm(struct ci_hdrc *ci, bool enable)
178 enum ci_hw_regs reg = ci->hw_bank.lpm ? OP_DEVLC : OP_PORTSC;
179 bool lpm = !!(hw_read(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm)));
181 if (enable && !lpm) {
182 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
183 PORTSC_PHCD(ci->hw_bank.lpm));
184 } else if (!enable && lpm) {
185 hw_write(ci, reg, PORTSC_PHCD(ci->hw_bank.lpm),
188 * The controller needs at least 1ms to reflect
189 * PHY's status, the PHY also needs some time (less
190 * than 1ms) to leave low power mode.
192 usleep_range(1500, 2000);
196 static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
200 /* bank is a module variable */
201 ci->hw_bank.abs = base;
203 ci->hw_bank.cap = ci->hw_bank.abs;
204 ci->hw_bank.cap += ci->platdata->capoffset;
205 ci->hw_bank.op = ci->hw_bank.cap + (ioread32(ci->hw_bank.cap) & 0xff);
207 hw_alloc_regmap(ci, false);
208 reg = hw_read(ci, CAP_HCCPARAMS, HCCPARAMS_LEN) >>
209 __ffs(HCCPARAMS_LEN);
210 ci->hw_bank.lpm = reg;
211 hw_alloc_regmap(ci, !!reg);
212 ci->hw_bank.size = ci->hw_bank.op - ci->hw_bank.abs;
213 ci->hw_bank.size += OP_LAST;
214 ci->hw_bank.size /= sizeof(u32);
216 reg = hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DEN) >>
217 __ffs(DCCPARAMS_DEN);
218 ci->hw_ep_max = reg * 2; /* cache hw ENDPT_MAX */
220 if (ci->hw_ep_max > ENDPT_MAX)
223 ci_hdrc_enter_lpm(ci, false);
225 /* Disable all interrupts bits */
226 hw_write(ci, OP_USBINTR, 0xffffffff, 0);
228 /* Clear all interrupts status bits*/
229 hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
231 dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
232 ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
234 /* setup lock mode ? */
236 /* ENDPTSETUPSTAT is '0' by default */
238 /* HCSPARAMS.bf.ppc SHOULD BE zero for device */
243 static void hw_phymode_configure(struct ci_hdrc *ci)
245 u32 portsc, lpm, sts;
247 switch (ci->platdata->phy_mode) {
248 case USBPHY_INTERFACE_MODE_UTMI:
249 portsc = PORTSC_PTS(PTS_UTMI);
250 lpm = DEVLC_PTS(PTS_UTMI);
252 case USBPHY_INTERFACE_MODE_UTMIW:
253 portsc = PORTSC_PTS(PTS_UTMI) | PORTSC_PTW;
254 lpm = DEVLC_PTS(PTS_UTMI) | DEVLC_PTW;
256 case USBPHY_INTERFACE_MODE_ULPI:
257 portsc = PORTSC_PTS(PTS_ULPI);
258 lpm = DEVLC_PTS(PTS_ULPI);
260 case USBPHY_INTERFACE_MODE_SERIAL:
261 portsc = PORTSC_PTS(PTS_SERIAL);
262 lpm = DEVLC_PTS(PTS_SERIAL);
265 case USBPHY_INTERFACE_MODE_HSIC:
266 portsc = PORTSC_PTS(PTS_HSIC);
267 lpm = DEVLC_PTS(PTS_HSIC);
273 if (ci->hw_bank.lpm) {
274 hw_write(ci, OP_DEVLC, DEVLC_PTS(7) | DEVLC_PTW, lpm);
275 hw_write(ci, OP_DEVLC, DEVLC_STS, sts);
277 hw_write(ci, OP_PORTSC, PORTSC_PTS(7) | PORTSC_PTW, portsc);
278 hw_write(ci, OP_PORTSC, PORTSC_STS, sts);
283 * hw_device_reset: resets chip (execute without interruption)
284 * @ci: the controller
286 * This function returns an error code
288 int hw_device_reset(struct ci_hdrc *ci, u32 mode)
290 /* should flush & stop before reset */
291 hw_write(ci, OP_ENDPTFLUSH, ~0, ~0);
292 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
294 hw_write(ci, OP_USBCMD, USBCMD_RST, USBCMD_RST);
295 while (hw_read(ci, OP_USBCMD, USBCMD_RST))
296 udelay(10); /* not RTOS friendly */
298 if (ci->platdata->notify_event)
299 ci->platdata->notify_event(ci,
300 CI_HDRC_CONTROLLER_RESET_EVENT);
302 if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING)
303 hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS);
305 /* USBMODE should be configured step by step */
306 hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE);
307 hw_write(ci, OP_USBMODE, USBMODE_CM, mode);
309 hw_write(ci, OP_USBMODE, USBMODE_SLOM, USBMODE_SLOM);
311 if (hw_read(ci, OP_USBMODE, USBMODE_CM) != mode) {
312 pr_err("cannot enter in %s mode", ci_role(ci)->name);
313 pr_err("lpm = %i", ci->hw_bank.lpm);
321 * hw_wait_reg: wait the register value
323 * Sometimes, it needs to wait register value before going on.
324 * Eg, when switch to device mode, the vbus value should be lower
325 * than OTGSC_BSV before connects to host.
327 * @ci: the controller
328 * @reg: register index
330 * @value: the bit value to wait
331 * @timeout_ms: timeout in millisecond
333 * This function returns an error code if timeout
335 int hw_wait_reg(struct ci_hdrc *ci, enum ci_hw_regs reg, u32 mask,
336 u32 value, unsigned int timeout_ms)
338 unsigned long elapse = jiffies + msecs_to_jiffies(timeout_ms);
340 while (hw_read(ci, reg, mask) != value) {
341 if (time_after(jiffies, elapse)) {
342 dev_err(ci->dev, "timeout waiting for %08x in %d\n",
352 static irqreturn_t ci_irq(int irq, void *data)
354 struct ci_hdrc *ci = data;
355 irqreturn_t ret = IRQ_NONE;
359 otgsc = hw_read(ci, OP_OTGSC, ~0);
362 * Handle id change interrupt, it indicates device/host function
365 if (ci->is_otg && (otgsc & OTGSC_IDIE) && (otgsc & OTGSC_IDIS)) {
367 ci_clear_otg_interrupt(ci, OTGSC_IDIS);
368 disable_irq_nosync(ci->irq);
369 queue_work(ci->wq, &ci->work);
374 * Handle vbus change interrupt, it indicates device connection
375 * and disconnection events.
377 if (ci->is_otg && (otgsc & OTGSC_BSVIE) && (otgsc & OTGSC_BSVIS)) {
378 ci->b_sess_valid_event = true;
379 ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
380 disable_irq_nosync(ci->irq);
381 queue_work(ci->wq, &ci->work);
385 /* Handle device/host interrupt */
386 if (ci->role != CI_ROLE_END)
387 ret = ci_role(ci)->irq(ci);
392 static int ci_get_platdata(struct device *dev,
393 struct ci_hdrc_platform_data *platdata)
395 if (!platdata->phy_mode)
396 platdata->phy_mode = of_usb_get_phy_mode(dev->of_node);
398 if (!platdata->dr_mode)
399 platdata->dr_mode = of_usb_get_dr_mode(dev->of_node);
401 if (platdata->dr_mode == USB_DR_MODE_UNKNOWN)
402 platdata->dr_mode = USB_DR_MODE_OTG;
404 if (platdata->dr_mode != USB_DR_MODE_PERIPHERAL) {
405 /* Get the vbus regulator */
406 platdata->reg_vbus = devm_regulator_get(dev, "vbus");
407 if (PTR_ERR(platdata->reg_vbus) == -EPROBE_DEFER) {
408 return -EPROBE_DEFER;
409 } else if (PTR_ERR(platdata->reg_vbus) == -ENODEV) {
410 /* no vbus regualator is needed */
411 platdata->reg_vbus = NULL;
412 } else if (IS_ERR(platdata->reg_vbus)) {
413 dev_err(dev, "Getting regulator error: %ld\n",
414 PTR_ERR(platdata->reg_vbus));
415 return PTR_ERR(platdata->reg_vbus);
422 static DEFINE_IDA(ci_ida);
424 struct platform_device *ci_hdrc_add_device(struct device *dev,
425 struct resource *res, int nres,
426 struct ci_hdrc_platform_data *platdata)
428 struct platform_device *pdev;
431 ret = ci_get_platdata(dev, platdata);
435 id = ida_simple_get(&ci_ida, 0, 0, GFP_KERNEL);
439 pdev = platform_device_alloc("ci_hdrc", id);
445 pdev->dev.parent = dev;
446 pdev->dev.dma_mask = dev->dma_mask;
447 pdev->dev.dma_parms = dev->dma_parms;
448 dma_set_coherent_mask(&pdev->dev, dev->coherent_dma_mask);
450 ret = platform_device_add_resources(pdev, res, nres);
454 ret = platform_device_add_data(pdev, platdata, sizeof(*platdata));
458 ret = platform_device_add(pdev);
465 platform_device_put(pdev);
467 ida_simple_remove(&ci_ida, id);
470 EXPORT_SYMBOL_GPL(ci_hdrc_add_device);
472 void ci_hdrc_remove_device(struct platform_device *pdev)
475 platform_device_unregister(pdev);
476 ida_simple_remove(&ci_ida, id);
478 EXPORT_SYMBOL_GPL(ci_hdrc_remove_device);
480 static inline void ci_role_destroy(struct ci_hdrc *ci)
482 ci_hdrc_gadget_destroy(ci);
483 ci_hdrc_host_destroy(ci);
485 ci_hdrc_otg_destroy(ci);
488 static void ci_get_otg_capable(struct ci_hdrc *ci)
490 if (ci->platdata->flags & CI_HDRC_DUAL_ROLE_NOT_OTG)
493 ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
494 DCCPARAMS_DC | DCCPARAMS_HC)
495 == (DCCPARAMS_DC | DCCPARAMS_HC));
497 dev_dbg(ci->dev, "It is OTG capable controller\n");
498 ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
499 ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
503 static int ci_usb_phy_init(struct ci_hdrc *ci)
505 if (ci->platdata->phy) {
506 ci->transceiver = ci->platdata->phy;
507 return usb_phy_init(ci->transceiver);
509 ci->global_phy = true;
510 ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
511 if (IS_ERR(ci->transceiver))
512 ci->transceiver = NULL;
518 static void ci_usb_phy_destroy(struct ci_hdrc *ci)
520 if (!ci->transceiver)
523 otg_set_peripheral(ci->transceiver->otg, NULL);
525 usb_put_phy(ci->transceiver);
527 usb_phy_shutdown(ci->transceiver);
530 static int ci_hdrc_probe(struct platform_device *pdev)
532 struct device *dev = &pdev->dev;
534 struct resource *res;
537 enum usb_dr_mode dr_mode;
539 if (!dev->platform_data) {
540 dev_err(dev, "platform data missing\n");
544 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
545 base = devm_ioremap_resource(dev, res);
547 return PTR_ERR(base);
549 ci = devm_kzalloc(dev, sizeof(*ci), GFP_KERNEL);
551 dev_err(dev, "can't allocate device\n");
556 ci->platdata = dev->platform_data;
558 ret = hw_device_init(ci, base);
560 dev_err(dev, "can't initialize hardware\n");
564 ret = ci_usb_phy_init(ci);
566 dev_err(dev, "unable to init phy: %d\n", ret);
570 ci->hw_bank.phys = res->start;
572 ci->irq = platform_get_irq(pdev, 0);
574 dev_err(dev, "missing IRQ\n");
579 ci_get_otg_capable(ci);
581 hw_phymode_configure(ci);
583 dr_mode = ci->platdata->dr_mode;
584 /* initialize role(s) before the interrupt is requested */
585 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) {
586 ret = ci_hdrc_host_init(ci);
588 dev_info(dev, "doesn't support host\n");
591 if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) {
592 ret = ci_hdrc_gadget_init(ci);
594 dev_info(dev, "doesn't support gadget\n");
595 if (!ret && ci->transceiver) {
596 ret = otg_set_peripheral(ci->transceiver->otg,
599 * If we implement all USB functions using chipidea drivers,
600 * it doesn't need to call above API, meanwhile, if we only
601 * use gadget function, calling above API is useless.
603 if (ret && ret != -ENOTSUPP)
608 if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) {
609 dev_err(dev, "no supported roles\n");
615 ret = ci_hdrc_otg_init(ci);
617 dev_err(dev, "init otg fails, ret = %d\n", ret);
622 if (ci->roles[CI_ROLE_HOST] && ci->roles[CI_ROLE_GADGET]) {
625 * ID pin needs 1ms debouce time,
626 * we delay 2ms for safe.
629 ci->role = ci_otg_role(ci);
630 ci_enable_otg_interrupt(ci, OTGSC_IDIE);
633 * If the controller is not OTG capable, but support
634 * role switch, the defalt role is gadget, and the
635 * user can switch it through debugfs.
637 ci->role = CI_ROLE_GADGET;
640 ci->role = ci->roles[CI_ROLE_HOST]
645 ret = ci_role_start(ci, ci->role);
647 dev_err(dev, "can't start %s role\n", ci_role(ci)->name);
651 platform_set_drvdata(pdev, ci);
652 ret = request_irq(ci->irq, ci_irq, IRQF_SHARED, ci->platdata->name,
657 ret = dbg_create_files(ci);
661 free_irq(ci->irq, ci);
665 ci_usb_phy_destroy(ci);
670 static int ci_hdrc_remove(struct platform_device *pdev)
672 struct ci_hdrc *ci = platform_get_drvdata(pdev);
674 dbg_remove_files(ci);
675 free_irq(ci->irq, ci);
677 ci_hdrc_enter_lpm(ci, true);
678 ci_usb_phy_destroy(ci);
679 kfree(ci->hw_bank.regmap);
684 static struct platform_driver ci_hdrc_driver = {
685 .probe = ci_hdrc_probe,
686 .remove = ci_hdrc_remove,
692 module_platform_driver(ci_hdrc_driver);
694 MODULE_ALIAS("platform:ci_hdrc");
695 MODULE_LICENSE("GPL v2");
696 MODULE_AUTHOR("David Lopo <dlopo@chipidea.mips.com>");
697 MODULE_DESCRIPTION("ChipIdea HDRC Driver");