drivers/usb/chipidea/udc.c

   1 /*
   2  * udc.c - ChipIdea UDC driver
   3  *
   4  * Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
   5  *
   6  * Author: David Lopo
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU General Public License version 2 as
  10  * published by the Free Software Foundation.
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/device.h>
  15 #include <linux/dmapool.h>
  16 #include <linux/err.h>
  17 #include <linux/irqreturn.h>
  18 #include <linux/kernel.h>
  19 #include <linux/slab.h>
  20 #include <linux/pm_runtime.h>
  21 #include <linux/usb/ch9.h>
  22 #include <linux/usb/gadget.h>
  23 #include <linux/usb/chipidea.h>
  24
  25 #include "ci.h"
  26 #include "udc.h"
  27 #include "bits.h"
  28 #include "debug.h"
  29 #include "otg.h"
  30
  31 /* control endpoint description */
  32 static const struct usb_endpoint_descriptor
  33 ctrl_endpt_out_desc = {
  34         .bLength         = USB_DT_ENDPOINT_SIZE,
  35         .bDescriptorType = USB_DT_ENDPOINT,
  36
  37         .bEndpointAddress = USB_DIR_OUT,
  38         .bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
  39         .wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
  40 };
  41
  42 static const struct usb_endpoint_descriptor
  43 ctrl_endpt_in_desc = {
  44         .bLength         = USB_DT_ENDPOINT_SIZE,
  45         .bDescriptorType = USB_DT_ENDPOINT,
  46
  47         .bEndpointAddress = USB_DIR_IN,
  48         .bmAttributes    = USB_ENDPOINT_XFER_CONTROL,
  49         .wMaxPacketSize  = cpu_to_le16(CTRL_PAYLOAD_MAX),
  50 };
  51
  52 /**
  53  * hw_ep_bit: calculates the bit number
  54  * @num: endpoint number
  55  * @dir: endpoint direction
  56  *
  57  * This function returns bit number
  58  */
  59 static inline int hw_ep_bit(int num, int dir)
  60 {
  61         return num + (dir ? 16 : 0);
  62 }
  63
  64 static inline int ep_to_bit(struct ci_hdrc *ci, int n)
  65 {
  66         int fill = 16 - ci->hw_ep_max / 2;
  67
  68         if (n >= ci->hw_ep_max / 2)
  69                 n += fill;
  70
  71         return n;
  72 }
  73
  74 /**
  75  * hw_device_state: enables/disables interrupts (execute without interruption)
  76  * @dma: 0 => disable, !0 => enable and set dma engine
  77  *
  78  * This function returns an error code
  79  */
  80 static int hw_device_state(struct ci_hdrc *ci, u32 dma)
  81 {
  82         if (dma) {
  83                 hw_write(ci, OP_ENDPTLISTADDR, ~0, dma);
  84                 /* interrupt, error, port change, reset, sleep/suspend */
  85                 hw_write(ci, OP_USBINTR, ~0,
  86                              USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI);
  87                 hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
  88         } else {
  89                 hw_write(ci, OP_USBINTR, ~0, 0);
  90                 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
  91         }
  92         return 0;
  93 }
  94
  95 /**
  96  * hw_ep_flush: flush endpoint fifo (execute without interruption)
  97  * @num: endpoint number
  98  * @dir: endpoint direction
  99  *
 100  * This function returns an error code
 101  */
 102 static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir)
 103 {
 104         int n = hw_ep_bit(num, dir);
 105
 106         do {
 107                 /* flush any pending transfer */
 108                 hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n));
 109                 while (hw_read(ci, OP_ENDPTFLUSH, BIT(n)))
 110                         cpu_relax();
 111         } while (hw_read(ci, OP_ENDPTSTAT, BIT(n)));
 112
 113         return 0;
 114 }
 115
 116 /**
 117  * hw_ep_disable: disables endpoint (execute without interruption)
 118  * @num: endpoint number
 119  * @dir: endpoint direction
 120  *
 121  * This function returns an error code
 122  */
 123 static int hw_ep_disable(struct ci_hdrc *ci, int num, int dir)
 124 {
 125         hw_ep_flush(ci, num, dir);
 126         hw_write(ci, OP_ENDPTCTRL + num,
 127                  dir ? ENDPTCTRL_TXE : ENDPTCTRL_RXE, 0);
 128         return 0;
 129 }
 130
 131 /**
 132  * hw_ep_enable: enables endpoint (execute without interruption)
 133  * @num:  endpoint number
 134  * @dir:  endpoint direction
 135  * @type: endpoint type
 136  *
 137  * This function returns an error code
 138  */
 139 static int hw_ep_enable(struct ci_hdrc *ci, int num, int dir, int type)
 140 {
 141         u32 mask, data;
 142
 143         if (dir) {
 144                 mask  = ENDPTCTRL_TXT;  /* type    */
 145                 data  = type << __ffs(mask);
 146
 147                 mask |= ENDPTCTRL_TXS;  /* unstall */
 148                 mask |= ENDPTCTRL_TXR;  /* reset data toggle */
 149                 data |= ENDPTCTRL_TXR;
 150                 mask |= ENDPTCTRL_TXE;  /* enable  */
 151                 data |= ENDPTCTRL_TXE;
 152         } else {
 153                 mask  = ENDPTCTRL_RXT;  /* type    */
 154                 data  = type << __ffs(mask);
 155
 156                 mask |= ENDPTCTRL_RXS;  /* unstall */
 157                 mask |= ENDPTCTRL_RXR;  /* reset data toggle */
 158                 data |= ENDPTCTRL_RXR;
 159                 mask |= ENDPTCTRL_RXE;  /* enable  */
 160                 data |= ENDPTCTRL_RXE;
 161         }
 162         hw_write(ci, OP_ENDPTCTRL + num, mask, data);
 163         return 0;
 164 }
 165
 166 /**
 167  * hw_ep_get_halt: return endpoint halt status
 168  * @num: endpoint number
 169  * @dir: endpoint direction
 170  *
 171  * This function returns 1 if endpoint halted
 172  */
 173 static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir)
 174 {
 175         u32 mask = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
 176
 177         return hw_read(ci, OP_ENDPTCTRL + num, mask) ? 1 : 0;
 178 }
 179
 180 /**
 181  * hw_ep_prime: primes endpoint (execute without interruption)
 182  * @num:     endpoint number
 183  * @dir:     endpoint direction
 184  * @is_ctrl: true if control endpoint
 185  *
 186  * This function returns an error code
 187  */
 188 static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl)
 189 {
 190         int n = hw_ep_bit(num, dir);
 191
 192         if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 193                 return -EAGAIN;
 194
 195         hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n));
 196
 197         while (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 198                 cpu_relax();
 199         if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num)))
 200                 return -EAGAIN;
 201
 202         /* status shoult be tested according with manual but it doesn't work */
 203         return 0;
 204 }
 205
 206 /**
 207  * hw_ep_set_halt: configures ep halt & resets data toggle after clear (execute
 208  *                 without interruption)
 209  * @num:   endpoint number
 210  * @dir:   endpoint direction
 211  * @value: true => stall, false => unstall
 212  *
 213  * This function returns an error code
 214  */
 215 static int hw_ep_set_halt(struct ci_hdrc *ci, int num, int dir, int value)
 216 {
 217         if (value != 0 && value != 1)
 218                 return -EINVAL;
 219
 220         do {
 221                 enum ci_hw_regs reg = OP_ENDPTCTRL + num;
 222                 u32 mask_xs = dir ? ENDPTCTRL_TXS : ENDPTCTRL_RXS;
 223                 u32 mask_xr = dir ? ENDPTCTRL_TXR : ENDPTCTRL_RXR;
 224
 225                 /* data toggle - reserved for EP0 but it's in ESS */
 226                 hw_write(ci, reg, mask_xs|mask_xr,
 227                           value ? mask_xs : mask_xr);
 228         } while (value != hw_ep_get_halt(ci, num, dir));
 229
 230         return 0;
 231 }
 232
 233 /**
 234  * hw_is_port_high_speed: test if port is high speed
 235  *
 236  * This function returns true if high speed port
 237  */
 238 static int hw_port_is_high_speed(struct ci_hdrc *ci)
 239 {
 240         return ci->hw_bank.lpm ? hw_read(ci, OP_DEVLC, DEVLC_PSPD) :
 241                 hw_read(ci, OP_PORTSC, PORTSC_HSP);
 242 }
 243
 244 /**
 245  * hw_read_intr_enable: returns interrupt enable register
 246  *
 247  * This function returns register data
 248  */
 249 static u32 hw_read_intr_enable(struct ci_hdrc *ci)
 250 {
 251         return hw_read(ci, OP_USBINTR, ~0);
 252 }
 253
 254 /**
 255  * hw_read_intr_status: returns interrupt status register
 256  *
 257  * This function returns register data
 258  */
 259 static u32 hw_read_intr_status(struct ci_hdrc *ci)
 260 {
 261         return hw_read(ci, OP_USBSTS, ~0);
 262 }
 263
 264 /**
 265  * hw_test_and_clear_complete: test & clear complete status (execute without
 266  *                             interruption)
 267  * @n: endpoint number
 268  *
 269  * This function returns complete status
 270  */
 271 static int hw_test_and_clear_complete(struct ci_hdrc *ci, int n)
 272 {
 273         n = ep_to_bit(ci, n);
 274         return hw_test_and_clear(ci, OP_ENDPTCOMPLETE, BIT(n));
 275 }
 276
 277 /**
 278  * hw_test_and_clear_intr_active: test & clear active interrupts (execute
 279  *                                without interruption)
 280  *
 281  * This function returns active interrutps
 282  */
 283 static u32 hw_test_and_clear_intr_active(struct ci_hdrc *ci)
 284 {
 285         u32 reg = hw_read_intr_status(ci) & hw_read_intr_enable(ci);
 286
 287         hw_write(ci, OP_USBSTS, ~0, reg);
 288         return reg;
 289 }
 290
 291 /**
 292  * hw_test_and_clear_setup_guard: test & clear setup guard (execute without
 293  *                                interruption)
 294  *
 295  * This function returns guard value
 296  */
 297 static int hw_test_and_clear_setup_guard(struct ci_hdrc *ci)
 298 {
 299         return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, 0);
 300 }
 301
 302 /**
 303  * hw_test_and_set_setup_guard: test & set setup guard (execute without
 304  *                              interruption)
 305  *
 306  * This function returns guard value
 307  */
 308 static int hw_test_and_set_setup_guard(struct ci_hdrc *ci)
 309 {
 310         return hw_test_and_write(ci, OP_USBCMD, USBCMD_SUTW, USBCMD_SUTW);
 311 }
 312
 313 /**
 314  * hw_usb_set_address: configures USB address (execute without interruption)
 315  * @value: new USB address
 316  *
 317  * This function explicitly sets the address, without the "USBADRA" (advance)
 318  * feature, which is not supported by older versions of the controller.
 319  */
 320 static void hw_usb_set_address(struct ci_hdrc *ci, u8 value)
 321 {
 322         hw_write(ci, OP_DEVICEADDR, DEVICEADDR_USBADR,
 323                  value << __ffs(DEVICEADDR_USBADR));
 324 }
 325
 326 /**
 327  * hw_usb_reset: restart device after a bus reset (execute without
 328  *               interruption)
 329  *
 330  * This function returns an error code
 331  */
 332 static int hw_usb_reset(struct ci_hdrc *ci)
 333 {
 334         hw_usb_set_address(ci, 0);
 335
 336         /* ESS flushes only at end?!? */
 337         hw_write(ci, OP_ENDPTFLUSH,    ~0, ~0);
 338
 339         /* clear setup token semaphores */
 340         hw_write(ci, OP_ENDPTSETUPSTAT, 0,  0);
 341
 342         /* clear complete status */
 343         hw_write(ci, OP_ENDPTCOMPLETE,  0,  0);
 344
 345         /* wait until all bits cleared */
 346         while (hw_read(ci, OP_ENDPTPRIME, ~0))
 347                 udelay(10);             /* not RTOS friendly */
 348
 349         /* reset all endpoints ? */
 350
 351         /* reset internal status and wait for further instructions
 352            no need to verify the port reset status (ESS does it) */
 353
 354         return 0;
 355 }
 356
 357 /******************************************************************************
 358  * UTIL block
 359  *****************************************************************************/
 360
 361 static int add_td_to_list(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq,
 362                           unsigned length)
 363 {
 364         int i;
 365         u32 temp;
 366         struct td_node *lastnode, *node = kzalloc(sizeof(struct td_node),
 367                                                   GFP_ATOMIC);
 368
 369         if (node == NULL)
 370                 return -ENOMEM;
 371
 372         node->ptr = dma_pool_alloc(hwep->td_pool, GFP_ATOMIC,
 373                                    &node->dma);
 374         if (node->ptr == NULL) {
 375                 kfree(node);
 376                 return -ENOMEM;
 377         }
 378
 379         memset(node->ptr, 0, sizeof(struct ci_hw_td));
 380         node->ptr->token = cpu_to_le32(length << __ffs(TD_TOTAL_BYTES));
 381         node->ptr->token &= cpu_to_le32(TD_TOTAL_BYTES);
 382         node->ptr->token |= cpu_to_le32(TD_STATUS_ACTIVE);
 383         if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX) {
 384                 u32 mul = hwreq->req.length / hwep->ep.maxpacket;
 385
 386                 if (hwreq->req.length == 0
 387                                 || hwreq->req.length % hwep->ep.maxpacket)
 388                         mul++;
 389                 node->ptr->token |= mul << __ffs(TD_MULTO);
 390         }
 391
 392         temp = (u32) (hwreq->req.dma + hwreq->req.actual);
 393         if (length) {
 394                 node->ptr->page[0] = cpu_to_le32(temp);
 395                 for (i = 1; i < TD_PAGE_COUNT; i++) {
 396                         u32 page = temp + i * CI_HDRC_PAGE_SIZE;
 397                         page &= ~TD_RESERVED_MASK;
 398                         node->ptr->page[i] = cpu_to_le32(page);
 399                 }
 400         }
 401
 402         hwreq->req.actual += length;
 403
 404         if (!list_empty(&hwreq->tds)) {
 405                 /* get the last entry */
 406                 lastnode = list_entry(hwreq->tds.prev,
 407                                 struct td_node, td);
 408                 lastnode->ptr->next = cpu_to_le32(node->dma);
 409         }
 410
 411         INIT_LIST_HEAD(&node->td);
 412         list_add_tail(&node->td, &hwreq->tds);
 413
 414         return 0;
 415 }
 416
 417 /**
 418  * _usb_addr: calculates endpoint address from direction & number
 419  * @ep:  endpoint
 420  */
 421 static inline u8 _usb_addr(struct ci_hw_ep *ep)
 422 {
 423         return ((ep->dir == TX) ? USB_ENDPOINT_DIR_MASK : 0) | ep->num;
 424 }
 425
 426 /**
 427  * _hardware_queue: configures a request at hardware level
 428  * @gadget: gadget
 429  * @hwep:   endpoint
 430  *
 431  * This function returns an error code
 432  */
 433 static int _hardware_enqueue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 434 {
 435         struct ci_hdrc *ci = hwep->ci;
 436         int ret = 0;
 437         unsigned rest = hwreq->req.length;
 438         int pages = TD_PAGE_COUNT;
 439         struct td_node *firstnode, *lastnode;
 440
 441         /* don't queue twice */
 442         if (hwreq->req.status == -EALREADY)
 443                 return -EALREADY;
 444
 445         hwreq->req.status = -EALREADY;
 446
 447         ret = usb_gadget_map_request(&ci->gadget, &hwreq->req, hwep->dir);
 448         if (ret)
 449                 return ret;
 450
 451         /*
 452          * The first buffer could be not page aligned.
 453          * In that case we have to span into one extra td.
 454          */
 455         if (hwreq->req.dma % PAGE_SIZE)
 456                 pages--;
 457
 458         if (rest == 0)
 459                 add_td_to_list(hwep, hwreq, 0);
 460
 461         while (rest > 0) {
 462                 unsigned count = min(hwreq->req.length - hwreq->req.actual,
 463                                         (unsigned)(pages * CI_HDRC_PAGE_SIZE));
 464                 add_td_to_list(hwep, hwreq, count);
 465                 rest -= count;
 466         }
 467
 468         if (hwreq->req.zero && hwreq->req.length
 469             && (hwreq->req.length % hwep->ep.maxpacket == 0))
 470                 add_td_to_list(hwep, hwreq, 0);
 471
 472         firstnode = list_first_entry(&hwreq->tds, struct td_node, td);
 473
 474         lastnode = list_entry(hwreq->tds.prev,
 475                 struct td_node, td);
 476
 477         lastnode->ptr->next = cpu_to_le32(TD_TERMINATE);
 478         if (!hwreq->req.no_interrupt)
 479                 lastnode->ptr->token |= cpu_to_le32(TD_IOC);
 480         wmb();
 481
 482         hwreq->req.actual = 0;
 483         if (!list_empty(&hwep->qh.queue)) {
 484                 struct ci_hw_req *hwreqprev;
 485                 int n = hw_ep_bit(hwep->num, hwep->dir);
 486                 int tmp_stat;
 487                 struct td_node *prevlastnode;
 488                 u32 next = firstnode->dma & TD_ADDR_MASK;
 489
 490                 hwreqprev = list_entry(hwep->qh.queue.prev,
 491                                 struct ci_hw_req, queue);
 492                 prevlastnode = list_entry(hwreqprev->tds.prev,
 493                                 struct td_node, td);
 494
 495                 prevlastnode->ptr->next = cpu_to_le32(next);
 496                 wmb();
 497                 if (hw_read(ci, OP_ENDPTPRIME, BIT(n)))
 498                         goto done;
 499                 do {
 500                         hw_write(ci, OP_USBCMD, USBCMD_ATDTW, USBCMD_ATDTW);
 501                         tmp_stat = hw_read(ci, OP_ENDPTSTAT, BIT(n));
 502                 } while (!hw_read(ci, OP_USBCMD, USBCMD_ATDTW));
 503                 hw_write(ci, OP_USBCMD, USBCMD_ATDTW, 0);
 504                 if (tmp_stat)
 505                         goto done;
 506         }
 507
 508         /*  QH configuration */
 509         hwep->qh.ptr->td.next = cpu_to_le32(firstnode->dma);
 510         hwep->qh.ptr->td.token &=
 511                 cpu_to_le32(~(TD_STATUS_HALTED|TD_STATUS_ACTIVE));
 512
 513         if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == RX) {
 514                 u32 mul = hwreq->req.length / hwep->ep.maxpacket;
 515
 516                 if (hwreq->req.length == 0
 517                                 || hwreq->req.length % hwep->ep.maxpacket)
 518                         mul++;
 519                 hwep->qh.ptr->cap |= mul << __ffs(QH_MULT);
 520         }
 521
 522         wmb();   /* synchronize before ep prime */
 523
 524         ret = hw_ep_prime(ci, hwep->num, hwep->dir,
 525                            hwep->type == USB_ENDPOINT_XFER_CONTROL);
 526 done:
 527         return ret;
 528 }
 529
 530 /*
 531  * free_pending_td: remove a pending request for the endpoint
 532  * @hwep: endpoint
 533  */
 534 static void free_pending_td(struct ci_hw_ep *hwep)
 535 {
 536         struct td_node *pending = hwep->pending_td;
 537
 538         dma_pool_free(hwep->td_pool, pending->ptr, pending->dma);
 539         hwep->pending_td = NULL;
 540         kfree(pending);
 541 }
 542
 543 /**
 544  * _hardware_dequeue: handles a request at hardware level
 545  * @gadget: gadget
 546  * @hwep:   endpoint
 547  *
 548  * This function returns an error code
 549  */
 550 static int _hardware_dequeue(struct ci_hw_ep *hwep, struct ci_hw_req *hwreq)
 551 {
 552         u32 tmptoken;
 553         struct td_node *node, *tmpnode;
 554         unsigned remaining_length;
 555         unsigned actual = hwreq->req.length;
 556
 557         if (hwreq->req.status != -EALREADY)
 558                 return -EINVAL;
 559
 560         hwreq->req.status = 0;
 561
 562         list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 563                 tmptoken = le32_to_cpu(node->ptr->token);
 564                 if ((TD_STATUS_ACTIVE & tmptoken) != 0) {
 565                         hwreq->req.status = -EALREADY;
 566                         return -EBUSY;
 567                 }
 568
 569                 remaining_length = (tmptoken & TD_TOTAL_BYTES);
 570                 remaining_length >>= __ffs(TD_TOTAL_BYTES);
 571                 actual -= remaining_length;
 572
 573                 hwreq->req.status = tmptoken & TD_STATUS;
 574                 if ((TD_STATUS_HALTED & hwreq->req.status)) {
 575                         hwreq->req.status = -EPIPE;
 576                         break;
 577                 } else if ((TD_STATUS_DT_ERR & hwreq->req.status)) {
 578                         hwreq->req.status = -EPROTO;
 579                         break;
 580                 } else if ((TD_STATUS_TR_ERR & hwreq->req.status)) {
 581                         hwreq->req.status = -EILSEQ;
 582                         break;
 583                 }
 584
 585                 if (remaining_length) {
 586                         if (hwep->dir) {
 587                                 hwreq->req.status = -EPROTO;
 588                                 break;
 589                         }
 590                 }
 591                 /*
 592                  * As the hardware could still address the freed td
 593                  * which will run the udc unusable, the cleanup of the
 594                  * td has to be delayed by one.
 595                  */
 596                 if (hwep->pending_td)
 597                         free_pending_td(hwep);
 598
 599                 hwep->pending_td = node;
 600                 list_del_init(&node->td);
 601         }
 602
 603         usb_gadget_unmap_request(&hwep->ci->gadget, &hwreq->req, hwep->dir);
 604
 605         hwreq->req.actual += actual;
 606
 607         if (hwreq->req.status)
 608                 return hwreq->req.status;
 609
 610         return hwreq->req.actual;
 611 }
 612
 613 /**
 614  * _ep_nuke: dequeues all endpoint requests
 615  * @hwep: endpoint
 616  *
 617  * This function returns an error code
 618  * Caller must hold lock
 619  */
 620 static int _ep_nuke(struct ci_hw_ep *hwep)
 621 __releases(hwep->lock)
 622 __acquires(hwep->lock)
 623 {
 624         struct td_node *node, *tmpnode;
 625         if (hwep == NULL)
 626                 return -EINVAL;
 627
 628         hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
 629
 630         while (!list_empty(&hwep->qh.queue)) {
 631
 632                 /* pop oldest request */
 633                 struct ci_hw_req *hwreq = list_entry(hwep->qh.queue.next,
 634                                                      struct ci_hw_req, queue);
 635
 636                 list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 637                         dma_pool_free(hwep->td_pool, node->ptr, node->dma);
 638                         list_del_init(&node->td);
 639                         node->ptr = NULL;
 640                         kfree(node);
 641                 }
 642
 643                 list_del_init(&hwreq->queue);
 644                 hwreq->req.status = -ESHUTDOWN;
 645
 646                 if (hwreq->req.complete != NULL) {
 647                         spin_unlock(hwep->lock);
 648                         hwreq->req.complete(&hwep->ep, &hwreq->req);
 649                         spin_lock(hwep->lock);
 650                 }
 651         }
 652
 653         if (hwep->pending_td)
 654                 free_pending_td(hwep);
 655
 656         return 0;
 657 }
 658
 659 /**
 660  * _gadget_stop_activity: stops all USB activity, flushes & disables all endpts
 661  * @gadget: gadget
 662  *
 663  * This function returns an error code
 664  */
 665 static int _gadget_stop_activity(struct usb_gadget *gadget)
 666 {
 667         struct usb_ep *ep;
 668         struct ci_hdrc    *ci = container_of(gadget, struct ci_hdrc, gadget);
 669         unsigned long flags;
 670
 671         spin_lock_irqsave(&ci->lock, flags);
 672         ci->gadget.speed = USB_SPEED_UNKNOWN;
 673         ci->remote_wakeup = 0;
 674         ci->suspended = 0;
 675         spin_unlock_irqrestore(&ci->lock, flags);
 676
 677         /* flush all endpoints */
 678         gadget_for_each_ep(ep, gadget) {
 679                 usb_ep_fifo_flush(ep);
 680         }
 681         usb_ep_fifo_flush(&ci->ep0out->ep);
 682         usb_ep_fifo_flush(&ci->ep0in->ep);
 683
 684         /* make sure to disable all endpoints */
 685         gadget_for_each_ep(ep, gadget) {
 686                 usb_ep_disable(ep);
 687         }
 688
 689         if (ci->status != NULL) {
 690                 usb_ep_free_request(&ci->ep0in->ep, ci->status);
 691                 ci->status = NULL;
 692         }
 693
 694         return 0;
 695 }
 696
 697 /******************************************************************************
 698  * ISR block
 699  *****************************************************************************/
 700 /**
 701  * isr_reset_handler: USB reset interrupt handler
 702  * @ci: UDC device
 703  *
 704  * This function resets USB engine after a bus reset occurred
 705  */
 706 static void isr_reset_handler(struct ci_hdrc *ci)
 707 __releases(ci->lock)
 708 __acquires(ci->lock)
 709 {
 710         int retval;
 711
 712         spin_unlock(&ci->lock);
 713         if (ci->gadget.speed != USB_SPEED_UNKNOWN) {
 714                 if (ci->driver)
 715                         ci->driver->disconnect(&ci->gadget);
 716         }
 717
 718         retval = _gadget_stop_activity(&ci->gadget);
 719         if (retval)
 720                 goto done;
 721
 722         retval = hw_usb_reset(ci);
 723         if (retval)
 724                 goto done;
 725
 726         ci->status = usb_ep_alloc_request(&ci->ep0in->ep, GFP_ATOMIC);
 727         if (ci->status == NULL)
 728                 retval = -ENOMEM;
 729
 730 done:
 731         spin_lock(&ci->lock);
 732
 733         if (retval)
 734                 dev_err(ci->dev, "error: %i\n", retval);
 735 }
 736
 737 /**
 738  * isr_get_status_complete: get_status request complete function
 739  * @ep:  endpoint
 740  * @req: request handled
 741  *
 742  * Caller must release lock
 743  */
 744 static void isr_get_status_complete(struct usb_ep *ep, struct usb_request *req)
 745 {
 746         if (ep == NULL || req == NULL)
 747                 return;
 748
 749         kfree(req->buf);
 750         usb_ep_free_request(ep, req);
 751 }
 752
 753 /**
 754  * _ep_queue: queues (submits) an I/O request to an endpoint
 755  *
 756  * Caller must hold lock
 757  */
 758 static int _ep_queue(struct usb_ep *ep, struct usb_request *req,
 759                     gfp_t __maybe_unused gfp_flags)
 760 {
 761         struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
 762         struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
 763         struct ci_hdrc *ci = hwep->ci;
 764         int retval = 0;
 765
 766         if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
 767                 return -EINVAL;
 768
 769         if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
 770                 if (req->length)
 771                         hwep = (ci->ep0_dir == RX) ?
 772                                ci->ep0out : ci->ep0in;
 773                 if (!list_empty(&hwep->qh.queue)) {
 774                         _ep_nuke(hwep);
 775                         retval = -EOVERFLOW;
 776                         dev_warn(hwep->ci->dev, "endpoint ctrl %X nuked\n",
 777                                  _usb_addr(hwep));
 778                 }
 779         }
 780
 781         if (usb_endpoint_xfer_isoc(hwep->ep.desc) &&
 782             hwreq->req.length > (1 + hwep->ep.mult) * hwep->ep.maxpacket) {
 783                 dev_err(hwep->ci->dev, "request length too big for isochronous\n");
 784                 return -EMSGSIZE;
 785         }
 786
 787         /* first nuke then test link, e.g. previous status has not sent */
 788         if (!list_empty(&hwreq->queue)) {
 789                 dev_err(hwep->ci->dev, "request already in queue\n");
 790                 return -EBUSY;
 791         }
 792
 793         /* push request */
 794         hwreq->req.status = -EINPROGRESS;
 795         hwreq->req.actual = 0;
 796
 797         retval = _hardware_enqueue(hwep, hwreq);
 798
 799         if (retval == -EALREADY)
 800                 retval = 0;
 801         if (!retval)
 802                 list_add_tail(&hwreq->queue, &hwep->qh.queue);
 803
 804         return retval;
 805 }
 806
 807 /**
 808  * isr_get_status_response: get_status request response
 809  * @ci: ci struct
 810  * @setup: setup request packet
 811  *
 812  * This function returns an error code
 813  */
 814 static int isr_get_status_response(struct ci_hdrc *ci,
 815                                    struct usb_ctrlrequest *setup)
 816 __releases(hwep->lock)
 817 __acquires(hwep->lock)
 818 {
 819         struct ci_hw_ep *hwep = ci->ep0in;
 820         struct usb_request *req = NULL;
 821         gfp_t gfp_flags = GFP_ATOMIC;
 822         int dir, num, retval;
 823
 824         if (hwep == NULL || setup == NULL)
 825                 return -EINVAL;
 826
 827         spin_unlock(hwep->lock);
 828         req = usb_ep_alloc_request(&hwep->ep, gfp_flags);
 829         spin_lock(hwep->lock);
 830         if (req == NULL)
 831                 return -ENOMEM;
 832
 833         req->complete = isr_get_status_complete;
 834         req->length   = 2;
 835         req->buf      = kzalloc(req->length, gfp_flags);
 836         if (req->buf == NULL) {
 837                 retval = -ENOMEM;
 838                 goto err_free_req;
 839         }
 840
 841         if ((setup->bRequestType & USB_RECIP_MASK) == USB_RECIP_DEVICE) {
 842                 /* Assume that device is bus powered for now. */
 843                 *(u16 *)req->buf = ci->remote_wakeup << 1;
 844                 retval = 0;
 845         } else if ((setup->bRequestType & USB_RECIP_MASK) \
 846                    == USB_RECIP_ENDPOINT) {
 847                 dir = (le16_to_cpu(setup->wIndex) & USB_ENDPOINT_DIR_MASK) ?
 848                         TX : RX;
 849                 num =  le16_to_cpu(setup->wIndex) & USB_ENDPOINT_NUMBER_MASK;
 850                 *(u16 *)req->buf = hw_ep_get_halt(ci, num, dir);
 851         }
 852         /* else do nothing; reserved for future use */
 853
 854         retval = _ep_queue(&hwep->ep, req, gfp_flags);
 855         if (retval)
 856                 goto err_free_buf;
 857
 858         return 0;
 859
 860  err_free_buf:
 861         kfree(req->buf);
 862  err_free_req:
 863         spin_unlock(hwep->lock);
 864         usb_ep_free_request(&hwep->ep, req);
 865         spin_lock(hwep->lock);
 866         return retval;
 867 }
 868
 869 /**
 870  * isr_setup_status_complete: setup_status request complete function
 871  * @ep:  endpoint
 872  * @req: request handled
 873  *
 874  * Caller must release lock. Put the port in test mode if test mode
 875  * feature is selected.
 876  */
 877 static void
 878 isr_setup_status_complete(struct usb_ep *ep, struct usb_request *req)
 879 {
 880         struct ci_hdrc *ci = req->context;
 881         unsigned long flags;
 882
 883         if (ci->setaddr) {
 884                 hw_usb_set_address(ci, ci->address);
 885                 ci->setaddr = false;
 886         }
 887
 888         spin_lock_irqsave(&ci->lock, flags);
 889         if (ci->test_mode)
 890                 hw_port_test_set(ci, ci->test_mode);
 891         spin_unlock_irqrestore(&ci->lock, flags);
 892 }
 893
 894 /**
 895  * isr_setup_status_phase: queues the status phase of a setup transation
 896  * @ci: ci struct
 897  *
 898  * This function returns an error code
 899  */
 900 static int isr_setup_status_phase(struct ci_hdrc *ci)
 901 {
 902         int retval;
 903         struct ci_hw_ep *hwep;
 904
 905         hwep = (ci->ep0_dir == TX) ? ci->ep0out : ci->ep0in;
 906         ci->status->context = ci;
 907         ci->status->complete = isr_setup_status_complete;
 908
 909         retval = _ep_queue(&hwep->ep, ci->status, GFP_ATOMIC);
 910
 911         return retval;
 912 }
 913
 914 /**
 915  * isr_tr_complete_low: transaction complete low level handler
 916  * @hwep: endpoint
 917  *
 918  * This function returns an error code
 919  * Caller must hold lock
 920  */
 921 static int isr_tr_complete_low(struct ci_hw_ep *hwep)
 922 __releases(hwep->lock)
 923 __acquires(hwep->lock)
 924 {
 925         struct ci_hw_req *hwreq, *hwreqtemp;
 926         struct ci_hw_ep *hweptemp = hwep;
 927         int retval = 0;
 928
 929         list_for_each_entry_safe(hwreq, hwreqtemp, &hwep->qh.queue,
 930                         queue) {
 931                 retval = _hardware_dequeue(hwep, hwreq);
 932                 if (retval < 0)
 933                         break;
 934                 list_del_init(&hwreq->queue);
 935                 if (hwreq->req.complete != NULL) {
 936                         spin_unlock(hwep->lock);
 937                         if ((hwep->type == USB_ENDPOINT_XFER_CONTROL) &&
 938                                         hwreq->req.length)
 939                                 hweptemp = hwep->ci->ep0in;
 940                         hwreq->req.complete(&hweptemp->ep, &hwreq->req);
 941                         spin_lock(hwep->lock);
 942                 }
 943         }
 944
 945         if (retval == -EBUSY)
 946                 retval = 0;
 947
 948         return retval;
 949 }
 950
 951 /**
 952  * isr_tr_complete_handler: transaction complete interrupt handler
 953  * @ci: UDC descriptor
 954  *
 955  * This function handles traffic events
 956  */
 957 static void isr_tr_complete_handler(struct ci_hdrc *ci)
 958 __releases(ci->lock)
 959 __acquires(ci->lock)
 960 {
 961         unsigned i;
 962         u8 tmode = 0;
 963
 964         for (i = 0; i < ci->hw_ep_max; i++) {
 965                 struct ci_hw_ep *hwep  = &ci->ci_hw_ep[i];
 966                 int type, num, dir, err = -EINVAL;
 967                 struct usb_ctrlrequest req;
 968
 969                 if (hwep->ep.desc == NULL)
 970                         continue;   /* not configured */
 971
 972                 if (hw_test_and_clear_complete(ci, i)) {
 973                         err = isr_tr_complete_low(hwep);
 974                         if (hwep->type == USB_ENDPOINT_XFER_CONTROL) {
 975                                 if (err > 0)   /* needs status phase */
 976                                         err = isr_setup_status_phase(ci);
 977                                 if (err < 0) {
 978                                         spin_unlock(&ci->lock);
 979                                         if (usb_ep_set_halt(&hwep->ep))
 980                                                 dev_err(ci->dev,
 981                                                         "error: ep_set_halt\n");
 982                                         spin_lock(&ci->lock);
 983                                 }
 984                         }
 985                 }
 986
 987                 /* Only handle setup packet below */
 988                 if (i != 0 ||
 989                         !hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0)))
 990                         continue;
 991
 992                 /*
 993                  * Flush data and handshake transactions of previous
 994                  * setup packet.
 995                  */
 996                 _ep_nuke(ci->ep0out);
 997                 _ep_nuke(ci->ep0in);
 998
 999                 /* read_setup_packet */
1000                 do {
1001                         hw_test_and_set_setup_guard(ci);
1002                         memcpy(&req, &hwep->qh.ptr->setup, sizeof(req));
1003                 } while (!hw_test_and_clear_setup_guard(ci));
1004
1005                 type = req.bRequestType;
1006
1007                 ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX;
1008
1009                 switch (req.bRequest) {
1010                 case USB_REQ_CLEAR_FEATURE:
1011                         if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
1012                                         le16_to_cpu(req.wValue) ==
1013                                         USB_ENDPOINT_HALT) {
1014                                 if (req.wLength != 0)
1015                                         break;
1016                                 num  = le16_to_cpu(req.wIndex);
1017                                 dir = num & USB_ENDPOINT_DIR_MASK;
1018                                 num &= USB_ENDPOINT_NUMBER_MASK;
1019                                 if (dir) /* TX */
1020                                         num += ci->hw_ep_max/2;
1021                                 if (!ci->ci_hw_ep[num].wedge) {
1022                                         spin_unlock(&ci->lock);
1023                                         err = usb_ep_clear_halt(
1024                                                 &ci->ci_hw_ep[num].ep);
1025                                         spin_lock(&ci->lock);
1026                                         if (err)
1027                                                 break;
1028                                 }
1029                                 err = isr_setup_status_phase(ci);
1030                         } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) &&
1031                                         le16_to_cpu(req.wValue) ==
1032                                         USB_DEVICE_REMOTE_WAKEUP) {
1033                                 if (req.wLength != 0)
1034                                         break;
1035                                 ci->remote_wakeup = 0;
1036                                 err = isr_setup_status_phase(ci);
1037                         } else {
1038                                 goto delegate;
1039                         }
1040                         break;
1041                 case USB_REQ_GET_STATUS:
1042                         if (type != (USB_DIR_IN|USB_RECIP_DEVICE)   &&
1043                             type != (USB_DIR_IN|USB_RECIP_ENDPOINT) &&
1044                             type != (USB_DIR_IN|USB_RECIP_INTERFACE))
1045                                 goto delegate;
1046                         if (le16_to_cpu(req.wLength) != 2 ||
1047                             le16_to_cpu(req.wValue)  != 0)
1048                                 break;
1049                         err = isr_get_status_response(ci, &req);
1050                         break;
1051                 case USB_REQ_SET_ADDRESS:
1052                         if (type != (USB_DIR_OUT|USB_RECIP_DEVICE))
1053                                 goto delegate;
1054                         if (le16_to_cpu(req.wLength) != 0 ||
1055                             le16_to_cpu(req.wIndex)  != 0)
1056                                 break;
1057                         ci->address = (u8)le16_to_cpu(req.wValue);
1058                         ci->setaddr = true;
1059                         err = isr_setup_status_phase(ci);
1060                         break;
1061                 case USB_REQ_SET_FEATURE:
1062                         if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) &&
1063                                         le16_to_cpu(req.wValue) ==
1064                                         USB_ENDPOINT_HALT) {
1065                                 if (req.wLength != 0)
1066                                         break;
1067                                 num  = le16_to_cpu(req.wIndex);
1068                                 dir = num & USB_ENDPOINT_DIR_MASK;
1069                                 num &= USB_ENDPOINT_NUMBER_MASK;
1070                                 if (dir) /* TX */
1071                                         num += ci->hw_ep_max/2;
1072
1073                                 spin_unlock(&ci->lock);
1074                                 err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep);
1075                                 spin_lock(&ci->lock);
1076                                 if (!err)
1077                                         isr_setup_status_phase(ci);
1078                         } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) {
1079                                 if (req.wLength != 0)
1080                                         break;
1081                                 switch (le16_to_cpu(req.wValue)) {
1082                                 case USB_DEVICE_REMOTE_WAKEUP:
1083                                         ci->remote_wakeup = 1;
1084                                         err = isr_setup_status_phase(ci);
1085                                         break;
1086                                 case USB_DEVICE_TEST_MODE:
1087                                         tmode = le16_to_cpu(req.wIndex) >> 8;
1088                                         switch (tmode) {
1089                                         case TEST_J:
1090                                         case TEST_K:
1091                                         case TEST_SE0_NAK:
1092                                         case TEST_PACKET:
1093                                         case TEST_FORCE_EN:
1094                                                 ci->test_mode = tmode;
1095                                                 err = isr_setup_status_phase(
1096                                                                 ci);
1097                                                 break;
1098                                         default:
1099                                                 break;
1100                                         }
1101                                 default:
1102                                         goto delegate;
1103                                 }
1104                         } else {
1105                                 goto delegate;
1106                         }
1107                         break;
1108                 default:
1109 delegate:
1110                         if (req.wLength == 0)   /* no data phase */
1111                                 ci->ep0_dir = TX;
1112
1113                         spin_unlock(&ci->lock);
1114                         err = ci->driver->setup(&ci->gadget, &req);
1115                         spin_lock(&ci->lock);
1116                         break;
1117                 }
1118
1119                 if (err < 0) {
1120                         spin_unlock(&ci->lock);
1121                         if (usb_ep_set_halt(&hwep->ep))
1122                                 dev_err(ci->dev, "error: ep_set_halt\n");
1123                         spin_lock(&ci->lock);
1124                 }
1125         }
1126 }
1127
1128 /******************************************************************************
1129  * ENDPT block
1130  *****************************************************************************/
1131 /**
1132  * ep_enable: configure endpoint, making it usable
1133  *
1134  * Check usb_ep_enable() at "usb_gadget.h" for details
1135  */
1136 static int ep_enable(struct usb_ep *ep,
1137                      const struct usb_endpoint_descriptor *desc)
1138 {
1139         struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1140         int retval = 0;
1141         unsigned long flags;
1142         u32 cap = 0;
1143
1144         if (ep == NULL || desc == NULL)
1145                 return -EINVAL;
1146
1147         spin_lock_irqsave(hwep->lock, flags);
1148
1149         /* only internal SW should enable ctrl endpts */
1150
1151         hwep->ep.desc = desc;
1152
1153         if (!list_empty(&hwep->qh.queue))
1154                 dev_warn(hwep->ci->dev, "enabling a non-empty endpoint!\n");
1155
1156         hwep->dir  = usb_endpoint_dir_in(desc) ? TX : RX;
1157         hwep->num  = usb_endpoint_num(desc);
1158         hwep->type = usb_endpoint_type(desc);
1159
1160         hwep->ep.maxpacket = usb_endpoint_maxp(desc) & 0x07ff;
1161         hwep->ep.mult = QH_ISO_MULT(usb_endpoint_maxp(desc));
1162
1163         if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1164                 cap |= QH_IOS;
1165         if (hwep->num)
1166                 cap |= QH_ZLT;
1167         cap |= (hwep->ep.maxpacket << __ffs(QH_MAX_PKT)) & QH_MAX_PKT;
1168         /*
1169          * For ISO-TX, we set mult at QH as the largest value, and use
1170          * MultO at TD as real mult value.
1171          */
1172         if (hwep->type == USB_ENDPOINT_XFER_ISOC && hwep->dir == TX)
1173                 cap |= 3 << __ffs(QH_MULT);
1174
1175         hwep->qh.ptr->cap = cpu_to_le32(cap);
1176
1177         hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE);   /* needed? */
1178
1179         if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) {
1180                 dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n");
1181                 retval = -EINVAL;
1182         }
1183
1184         /*
1185          * Enable endpoints in the HW other than ep0 as ep0
1186          * is always enabled
1187          */
1188         if (hwep->num)
1189                 retval |= hw_ep_enable(hwep->ci, hwep->num, hwep->dir,
1190                                        hwep->type);
1191
1192         spin_unlock_irqrestore(hwep->lock, flags);
1193         return retval;
1194 }
1195
1196 /**
1197  * ep_disable: endpoint is no longer usable
1198  *
1199  * Check usb_ep_disable() at "usb_gadget.h" for details
1200  */
1201 static int ep_disable(struct usb_ep *ep)
1202 {
1203         struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1204         int direction, retval = 0;
1205         unsigned long flags;
1206
1207         if (ep == NULL)
1208                 return -EINVAL;
1209         else if (hwep->ep.desc == NULL)
1210                 return -EBUSY;
1211
1212         spin_lock_irqsave(hwep->lock, flags);
1213
1214         /* only internal SW should disable ctrl endpts */
1215
1216         direction = hwep->dir;
1217         do {
1218                 retval |= _ep_nuke(hwep);
1219                 retval |= hw_ep_disable(hwep->ci, hwep->num, hwep->dir);
1220
1221                 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1222                         hwep->dir = (hwep->dir == TX) ? RX : TX;
1223
1224         } while (hwep->dir != direction);
1225
1226         hwep->ep.desc = NULL;
1227
1228         spin_unlock_irqrestore(hwep->lock, flags);
1229         return retval;
1230 }
1231
1232 /**
1233  * ep_alloc_request: allocate a request object to use with this endpoint
1234  *
1235  * Check usb_ep_alloc_request() at "usb_gadget.h" for details
1236  */
1237 static struct usb_request *ep_alloc_request(struct usb_ep *ep, gfp_t gfp_flags)
1238 {
1239         struct ci_hw_req *hwreq = NULL;
1240
1241         if (ep == NULL)
1242                 return NULL;
1243
1244         hwreq = kzalloc(sizeof(struct ci_hw_req), gfp_flags);
1245         if (hwreq != NULL) {
1246                 INIT_LIST_HEAD(&hwreq->queue);
1247                 INIT_LIST_HEAD(&hwreq->tds);
1248         }
1249
1250         return (hwreq == NULL) ? NULL : &hwreq->req;
1251 }
1252
1253 /**
1254  * ep_free_request: frees a request object
1255  *
1256  * Check usb_ep_free_request() at "usb_gadget.h" for details
1257  */
1258 static void ep_free_request(struct usb_ep *ep, struct usb_request *req)
1259 {
1260         struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
1261         struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1262         struct td_node *node, *tmpnode;
1263         unsigned long flags;
1264
1265         if (ep == NULL || req == NULL) {
1266                 return;
1267         } else if (!list_empty(&hwreq->queue)) {
1268                 dev_err(hwep->ci->dev, "freeing queued request\n");
1269                 return;
1270         }
1271
1272         spin_lock_irqsave(hwep->lock, flags);
1273
1274         list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
1275                 dma_pool_free(hwep->td_pool, node->ptr, node->dma);
1276                 list_del_init(&node->td);
1277                 node->ptr = NULL;
1278                 kfree(node);
1279         }
1280
1281         kfree(hwreq);
1282
1283         spin_unlock_irqrestore(hwep->lock, flags);
1284 }
1285
1286 /**
1287  * ep_queue: queues (submits) an I/O request to an endpoint
1288  *
1289  * Check usb_ep_queue()* at usb_gadget.h" for details
1290  */
1291 static int ep_queue(struct usb_ep *ep, struct usb_request *req,
1292                     gfp_t __maybe_unused gfp_flags)
1293 {
1294         struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
1295         int retval = 0;
1296         unsigned long flags;
1297
1298         if (ep == NULL || req == NULL || hwep->ep.desc == NULL)
1299                 return -EINVAL;
1300
1301         spin_lock_irqsave(hwep->lock, flags);
1302         retval = _ep_queue(ep, req, gfp_flags);
1303         spin_unlock_irqrestore(hwep->lock, flags);
1304         return retval;
1305 }
1306
1307 /**
1308  * ep_dequeue: dequeues (cancels, unlinks) an I/O request from an endpoint
1309  *
1310  * Check usb_ep_dequeue() at "usb_gadget.h" for details
1311  */
1312 static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
1313 {
1314         struct ci_hw_ep  *hwep  = container_of(ep,  struct ci_hw_ep, ep);
1315         struct ci_hw_req *hwreq = container_of(req, struct ci_hw_req, req);
1316         unsigned long flags;
1317
1318         if (ep == NULL || req == NULL || hwreq->req.status != -EALREADY ||
1319                 hwep->ep.desc == NULL || list_empty(&hwreq->queue) ||
1320                 list_empty(&hwep->qh.queue))
1321                 return -EINVAL;
1322
1323         spin_lock_irqsave(hwep->lock, flags);
1324
1325         hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1326
1327         /* pop request */
1328         list_del_init(&hwreq->queue);
1329
1330         usb_gadget_unmap_request(&hwep->ci->gadget, req, hwep->dir);
1331
1332         req->status = -ECONNRESET;
1333
1334         if (hwreq->req.complete != NULL) {
1335                 spin_unlock(hwep->lock);
1336                 hwreq->req.complete(&hwep->ep, &hwreq->req);
1337                 spin_lock(hwep->lock);
1338         }
1339
1340         spin_unlock_irqrestore(hwep->lock, flags);
1341         return 0;
1342 }
1343
1344 /**
1345  * ep_set_halt: sets the endpoint halt feature
1346  *
1347  * Check usb_ep_set_halt() at "usb_gadget.h" for details
1348  */
1349 static int ep_set_halt(struct usb_ep *ep, int value)
1350 {
1351         struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1352         int direction, retval = 0;
1353         unsigned long flags;
1354
1355         if (ep == NULL || hwep->ep.desc == NULL)
1356                 return -EINVAL;
1357
1358         if (usb_endpoint_xfer_isoc(hwep->ep.desc))
1359                 return -EOPNOTSUPP;
1360
1361         spin_lock_irqsave(hwep->lock, flags);
1362
1363 #ifndef STALL_IN
1364         /* g_file_storage MS compliant but g_zero fails chapter 9 compliance */
1365         if (value && hwep->type == USB_ENDPOINT_XFER_BULK && hwep->dir == TX &&
1366             !list_empty(&hwep->qh.queue)) {
1367                 spin_unlock_irqrestore(hwep->lock, flags);
1368                 return -EAGAIN;
1369         }
1370 #endif
1371
1372         direction = hwep->dir;
1373         do {
1374                 retval |= hw_ep_set_halt(hwep->ci, hwep->num, hwep->dir, value);
1375
1376                 if (!value)
1377                         hwep->wedge = 0;
1378
1379                 if (hwep->type == USB_ENDPOINT_XFER_CONTROL)
1380                         hwep->dir = (hwep->dir == TX) ? RX : TX;
1381
1382         } while (hwep->dir != direction);
1383
1384         spin_unlock_irqrestore(hwep->lock, flags);
1385         return retval;
1386 }
1387
1388 /**
1389  * ep_set_wedge: sets the halt feature and ignores clear requests
1390  *
1391  * Check usb_ep_set_wedge() at "usb_gadget.h" for details
1392  */
1393 static int ep_set_wedge(struct usb_ep *ep)
1394 {
1395         struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1396         unsigned long flags;
1397
1398         if (ep == NULL || hwep->ep.desc == NULL)
1399                 return -EINVAL;
1400
1401         spin_lock_irqsave(hwep->lock, flags);
1402         hwep->wedge = 1;
1403         spin_unlock_irqrestore(hwep->lock, flags);
1404
1405         return usb_ep_set_halt(ep);
1406 }
1407
1408 /**
1409  * ep_fifo_flush: flushes contents of a fifo
1410  *
1411  * Check usb_ep_fifo_flush() at "usb_gadget.h" for details
1412  */
1413 static void ep_fifo_flush(struct usb_ep *ep)
1414 {
1415         struct ci_hw_ep *hwep = container_of(ep, struct ci_hw_ep, ep);
1416         unsigned long flags;
1417
1418         if (ep == NULL) {
1419                 dev_err(hwep->ci->dev, "%02X: -EINVAL\n", _usb_addr(hwep));
1420                 return;
1421         }
1422
1423         spin_lock_irqsave(hwep->lock, flags);
1424
1425         hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
1426
1427         spin_unlock_irqrestore(hwep->lock, flags);
1428 }
1429
1430 /**
1431  * Endpoint-specific part of the API to the USB controller hardware
1432  * Check "usb_gadget.h" for details
1433  */
1434 static const struct usb_ep_ops usb_ep_ops = {
1435         .enable        = ep_enable,
1436         .disable       = ep_disable,
1437         .alloc_request = ep_alloc_request,
1438         .free_request  = ep_free_request,
1439         .queue         = ep_queue,
1440         .dequeue       = ep_dequeue,
1441         .set_halt      = ep_set_halt,
1442         .set_wedge     = ep_set_wedge,
1443         .fifo_flush    = ep_fifo_flush,
1444 };
1445
1446 /******************************************************************************
1447  * GADGET block
1448  *****************************************************************************/
1449 static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
1450 {
1451         struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1452         unsigned long flags;
1453         int gadget_ready = 0;
1454
1455         spin_lock_irqsave(&ci->lock, flags);
1456         ci->vbus_active = is_active;
1457         if (ci->driver)
1458                 gadget_ready = 1;
1459         spin_unlock_irqrestore(&ci->lock, flags);
1460
1461         if (gadget_ready) {
1462                 if (is_active) {
1463                         pm_runtime_get_sync(&_gadget->dev);
1464                         hw_device_reset(ci, USBMODE_CM_DC);
1465                         hw_device_state(ci, ci->ep0out->qh.dma);
1466                         dev_dbg(ci->dev, "Connected to host\n");
1467                 } else {
1468                         if (ci->driver)
1469                                 ci->driver->disconnect(&ci->gadget);
1470                         hw_device_state(ci, 0);
1471                         if (ci->platdata->notify_event)
1472                                 ci->platdata->notify_event(ci,
1473                                 CI_HDRC_CONTROLLER_STOPPED_EVENT);
1474                         _gadget_stop_activity(&ci->gadget);
1475                         pm_runtime_put_sync(&_gadget->dev);
1476                         dev_dbg(ci->dev, "Disconnected from host\n");
1477                 }
1478         }
1479
1480         return 0;
1481 }
1482
1483 static int ci_udc_wakeup(struct usb_gadget *_gadget)
1484 {
1485         struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1486         unsigned long flags;
1487         int ret = 0;
1488
1489         spin_lock_irqsave(&ci->lock, flags);
1490         if (!ci->remote_wakeup) {
1491                 ret = -EOPNOTSUPP;
1492                 goto out;
1493         }
1494         if (!hw_read(ci, OP_PORTSC, PORTSC_SUSP)) {
1495                 ret = -EINVAL;
1496                 goto out;
1497         }
1498         hw_write(ci, OP_PORTSC, PORTSC_FPR, PORTSC_FPR);
1499 out:
1500         spin_unlock_irqrestore(&ci->lock, flags);
1501         return ret;
1502 }
1503
1504 static int ci_udc_vbus_draw(struct usb_gadget *_gadget, unsigned ma)
1505 {
1506         struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1507
1508         if (ci->transceiver)
1509                 return usb_phy_set_power(ci->transceiver, ma);
1510         return -ENOTSUPP;
1511 }
1512
1513 /* Change Data+ pullup status
1514  * this func is used by usb_gadget_connect/disconnet
1515  */
1516 static int ci_udc_pullup(struct usb_gadget *_gadget, int is_on)
1517 {
1518         struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
1519
1520         if (!ci->vbus_active)
1521                 return -EOPNOTSUPP;
1522
1523         if (is_on)
1524                 hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS);
1525         else
1526                 hw_write(ci, OP_USBCMD, USBCMD_RS, 0);
1527
1528         return 0;
1529 }
1530
1531 static int ci_udc_start(struct usb_gadget *gadget,
1532                          struct usb_gadget_driver *driver);
1533 static int ci_udc_stop(struct usb_gadget *gadget,
1534                         struct usb_gadget_driver *driver);
1535 /**
1536  * Device operations part of the API to the USB controller hardware,
1537  * which don't involve endpoints (or i/o)
1538  * Check  "usb_gadget.h" for details
1539  */
1540 static const struct usb_gadget_ops usb_gadget_ops = {
1541         .vbus_session   = ci_udc_vbus_session,
1542         .wakeup         = ci_udc_wakeup,
1543         .pullup         = ci_udc_pullup,
1544         .vbus_draw      = ci_udc_vbus_draw,
1545         .udc_start      = ci_udc_start,
1546         .udc_stop       = ci_udc_stop,
1547 };
1548
1549 static int init_eps(struct ci_hdrc *ci)
1550 {
1551         int retval = 0, i, j;
1552
1553         for (i = 0; i < ci->hw_ep_max/2; i++)
1554                 for (j = RX; j <= TX; j++) {
1555                         int k = i + j * ci->hw_ep_max/2;
1556                         struct ci_hw_ep *hwep = &ci->ci_hw_ep[k];
1557
1558                         scnprintf(hwep->name, sizeof(hwep->name), "ep%i%s", i,
1559                                         (j == TX)  ? "in" : "out");
1560
1561                         hwep->ci          = ci;
1562                         hwep->lock         = &ci->lock;
1563                         hwep->td_pool      = ci->td_pool;
1564
1565                         hwep->ep.name      = hwep->name;
1566                         hwep->ep.ops       = &usb_ep_ops;
1567                         /*
1568                          * for ep0: maxP defined in desc, for other
1569                          * eps, maxP is set by epautoconfig() called
1570                          * by gadget layer
1571                          */
1572                         usb_ep_set_maxpacket_limit(&hwep->ep, (unsigned short)~0);
1573
1574                         INIT_LIST_HEAD(&hwep->qh.queue);
1575                         hwep->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL,
1576                                                      &hwep->qh.dma);
1577                         if (hwep->qh.ptr == NULL)
1578                                 retval = -ENOMEM;
1579                         else
1580                                 memset(hwep->qh.ptr, 0, sizeof(*hwep->qh.ptr));
1581
1582                         /*
1583                          * set up shorthands for ep0 out and in endpoints,
1584                          * don't add to gadget's ep_list
1585                          */
1586                         if (i == 0) {
1587                                 if (j == RX)
1588                                         ci->ep0out = hwep;
1589                                 else
1590                                         ci->ep0in = hwep;
1591
1592                                 usb_ep_set_maxpacket_limit(&hwep->ep, CTRL_PAYLOAD_MAX);
1593                                 continue;
1594                         }
1595
1596                         list_add_tail(&hwep->ep.ep_list, &ci->gadget.ep_list);
1597                 }
1598
1599         return retval;
1600 }
1601
1602 static void destroy_eps(struct ci_hdrc *ci)
1603 {
1604         int i;
1605
1606         for (i = 0; i < ci->hw_ep_max; i++) {
1607                 struct ci_hw_ep *hwep = &ci->ci_hw_ep[i];
1608
1609                 if (hwep->pending_td)
1610                         free_pending_td(hwep);
1611                 dma_pool_free(ci->qh_pool, hwep->qh.ptr, hwep->qh.dma);
1612         }
1613 }
1614
1615 /**
1616  * ci_udc_start: register a gadget driver
1617  * @gadget: our gadget
1618  * @driver: the driver being registered
1619  *
1620  * Interrupts are enabled here.
1621  */
1622 static int ci_udc_start(struct usb_gadget *gadget,
1623                          struct usb_gadget_driver *driver)
1624 {
1625         struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1626         unsigned long flags;
1627         int retval = -ENOMEM;
1628
1629         if (driver->disconnect == NULL)
1630                 return -EINVAL;
1631
1632
1633         ci->ep0out->ep.desc = &ctrl_endpt_out_desc;
1634         retval = usb_ep_enable(&ci->ep0out->ep);
1635         if (retval)
1636                 return retval;
1637
1638         ci->ep0in->ep.desc = &ctrl_endpt_in_desc;
1639         retval = usb_ep_enable(&ci->ep0in->ep);
1640         if (retval)
1641                 return retval;
1642
1643         ci->driver = driver;
1644         pm_runtime_get_sync(&ci->gadget.dev);
1645         if (ci->vbus_active) {
1646                 spin_lock_irqsave(&ci->lock, flags);
1647                 hw_device_reset(ci, USBMODE_CM_DC);
1648         } else {
1649                 pm_runtime_put_sync(&ci->gadget.dev);
1650                 return retval;
1651         }
1652
1653         retval = hw_device_state(ci, ci->ep0out->qh.dma);
1654         spin_unlock_irqrestore(&ci->lock, flags);
1655         if (retval)
1656                 pm_runtime_put_sync(&ci->gadget.dev);
1657
1658         return retval;
1659 }
1660
1661 /**
1662  * ci_udc_stop: unregister a gadget driver
1663  */
1664 static int ci_udc_stop(struct usb_gadget *gadget,
1665                         struct usb_gadget_driver *driver)
1666 {
1667         struct ci_hdrc *ci = container_of(gadget, struct ci_hdrc, gadget);
1668         unsigned long flags;
1669
1670         spin_lock_irqsave(&ci->lock, flags);
1671
1672         if (ci->vbus_active) {
1673                 hw_device_state(ci, 0);
1674                 if (ci->platdata->notify_event)
1675                         ci->platdata->notify_event(ci,
1676                         CI_HDRC_CONTROLLER_STOPPED_EVENT);
1677                 spin_unlock_irqrestore(&ci->lock, flags);
1678                 _gadget_stop_activity(&ci->gadget);
1679                 spin_lock_irqsave(&ci->lock, flags);
1680                 pm_runtime_put(&ci->gadget.dev);
1681         }
1682
1683         ci->driver = NULL;
1684         spin_unlock_irqrestore(&ci->lock, flags);
1685
1686         return 0;
1687 }
1688
1689 /******************************************************************************
1690  * BUS block
1691  *****************************************************************************/
1692 /**
1693  * udc_irq: ci interrupt handler
1694  *
1695  * This function returns IRQ_HANDLED if the IRQ has been handled
1696  * It locks access to registers
1697  */
1698 static irqreturn_t udc_irq(struct ci_hdrc *ci)
1699 {
1700         irqreturn_t retval;
1701         u32 intr;
1702
1703         if (ci == NULL)
1704                 return IRQ_HANDLED;
1705
1706         spin_lock(&ci->lock);
1707
1708         if (ci->platdata->flags & CI_HDRC_REGS_SHARED) {
1709                 if (hw_read(ci, OP_USBMODE, USBMODE_CM) !=
1710                                 USBMODE_CM_DC) {
1711                         spin_unlock(&ci->lock);
1712                         return IRQ_NONE;
1713                 }
1714         }
1715         intr = hw_test_and_clear_intr_active(ci);
1716
1717         if (intr) {
1718                 /* order defines priority - do NOT change it */
1719                 if (USBi_URI & intr)
1720                         isr_reset_handler(ci);
1721
1722                 if (USBi_PCI & intr) {
1723                         ci->gadget.speed = hw_port_is_high_speed(ci) ?
1724                                 USB_SPEED_HIGH : USB_SPEED_FULL;
1725                         if (ci->suspended && ci->driver->resume) {
1726                                 spin_unlock(&ci->lock);
1727                                 ci->driver->resume(&ci->gadget);
1728                                 spin_lock(&ci->lock);
1729                                 ci->suspended = 0;
1730                         }
1731                 }
1732
1733                 if (USBi_UI  & intr)
1734                         isr_tr_complete_handler(ci);
1735
1736                 if (USBi_SLI & intr) {
1737                         if (ci->gadget.speed != USB_SPEED_UNKNOWN &&
1738                             ci->driver->suspend) {
1739                                 ci->suspended = 1;
1740                                 spin_unlock(&ci->lock);
1741                                 ci->driver->suspend(&ci->gadget);
1742                                 spin_lock(&ci->lock);
1743                         }
1744                 }
1745                 retval = IRQ_HANDLED;
1746         } else {
1747                 retval = IRQ_NONE;
1748         }
1749         spin_unlock(&ci->lock);
1750
1751         return retval;
1752 }
1753
1754 /**
1755  * udc_start: initialize gadget role
1756  * @ci: chipidea controller
1757  */
1758 static int udc_start(struct ci_hdrc *ci)
1759 {
1760         struct device *dev = ci->dev;
1761         int retval = 0;
1762
1763         spin_lock_init(&ci->lock);
1764
1765         ci->gadget.ops          = &usb_gadget_ops;
1766         ci->gadget.speed        = USB_SPEED_UNKNOWN;
1767         ci->gadget.max_speed    = USB_SPEED_HIGH;
1768         ci->gadget.is_otg       = 0;
1769         ci->gadget.name         = ci->platdata->name;
1770
1771         INIT_LIST_HEAD(&ci->gadget.ep_list);
1772
1773         /* alloc resources */
1774         ci->qh_pool = dma_pool_create("ci_hw_qh", dev,
1775                                        sizeof(struct ci_hw_qh),
1776                                        64, CI_HDRC_PAGE_SIZE);
1777         if (ci->qh_pool == NULL)
1778                 return -ENOMEM;
1779
1780         ci->td_pool = dma_pool_create("ci_hw_td", dev,
1781                                        sizeof(struct ci_hw_td),
1782                                        64, CI_HDRC_PAGE_SIZE);
1783         if (ci->td_pool == NULL) {
1784                 retval = -ENOMEM;
1785                 goto free_qh_pool;
1786         }
1787
1788         retval = init_eps(ci);
1789         if (retval)
1790                 goto free_pools;
1791
1792         ci->gadget.ep0 = &ci->ep0in->ep;
1793
1794         retval = usb_add_gadget_udc(dev, &ci->gadget);
1795         if (retval)
1796                 goto destroy_eps;
1797
1798         pm_runtime_no_callbacks(&ci->gadget.dev);
1799         pm_runtime_enable(&ci->gadget.dev);
1800
1801         return retval;
1802
1803 destroy_eps:
1804         destroy_eps(ci);
1805 free_pools:
1806         dma_pool_destroy(ci->td_pool);
1807 free_qh_pool:
1808         dma_pool_destroy(ci->qh_pool);
1809         return retval;
1810 }
1811
1812 /**
1813  * ci_hdrc_gadget_destroy: parent remove must call this to remove UDC
1814  *
1815  * No interrupts active, the IRQ has been released
1816  */
1817 void ci_hdrc_gadget_destroy(struct ci_hdrc *ci)
1818 {
1819         if (!ci->roles[CI_ROLE_GADGET])
1820                 return;
1821
1822         usb_del_gadget_udc(&ci->gadget);
1823
1824         destroy_eps(ci);
1825
1826         dma_pool_destroy(ci->td_pool);
1827         dma_pool_destroy(ci->qh_pool);
1828 }
1829
1830 static int udc_id_switch_for_device(struct ci_hdrc *ci)
1831 {
1832         if (ci->is_otg) {
1833                 ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
1834                 ci_enable_otg_interrupt(ci, OTGSC_BSVIE);
1835         }
1836
1837         return 0;
1838 }
1839
1840 static void udc_id_switch_for_host(struct ci_hdrc *ci)
1841 {
1842         if (ci->is_otg) {
1843                 /* host doesn't care B_SESSION_VALID event */
1844                 ci_clear_otg_interrupt(ci, OTGSC_BSVIS);
1845                 ci_disable_otg_interrupt(ci, OTGSC_BSVIE);
1846         }
1847 }
1848
1849 /**
1850  * ci_hdrc_gadget_init - initialize device related bits
1851  * ci: the controller
1852  *
1853  * This function initializes the gadget, if the device is "device capable".
1854  */
1855 int ci_hdrc_gadget_init(struct ci_hdrc *ci)
1856 {
1857         struct ci_role_driver *rdrv;
1858
1859         if (!hw_read(ci, CAP_DCCPARAMS, DCCPARAMS_DC))
1860                 return -ENXIO;
1861
1862         rdrv = devm_kzalloc(ci->dev, sizeof(struct ci_role_driver), GFP_KERNEL);
1863         if (!rdrv)
1864                 return -ENOMEM;
1865
1866         rdrv->start     = udc_id_switch_for_device;
1867         rdrv->stop      = udc_id_switch_for_host;
1868         rdrv->irq       = udc_irq;
1869         rdrv->name      = "gadget";
1870         ci->roles[CI_ROLE_GADGET] = rdrv;
1871
1872         return udc_start(ci);
1873 }