2 * Copyright (c) 2011 Samsung Electronics Co., Ltd.
3 * http://www.samsung.com
5 * Copyright 2008 Openmoko, Inc.
6 * Copyright 2008 Simtec Electronics
7 * Ben Dooks <ben@simtec.co.uk>
8 * http://armlinux.simtec.co.uk/
10 * S3C USB2.0 High-speed / OtG driver
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/spinlock.h>
20 #include <linux/interrupt.h>
21 #include <linux/platform_device.h>
22 #include <linux/dma-mapping.h>
23 #include <linux/mutex.h>
24 #include <linux/seq_file.h>
25 #include <linux/delay.h>
27 #include <linux/slab.h>
28 #include <linux/clk.h>
29 #include <linux/regulator/consumer.h>
30 #include <linux/of_platform.h>
31 #include <linux/phy/phy.h>
33 #include <linux/usb/ch9.h>
34 #include <linux/usb/gadget.h>
35 #include <linux/usb/phy.h>
36 #include <linux/platform_data/s3c-hsotg.h>
41 /* conversion functions */
42 static inline struct dwc2_hsotg_req *our_req(struct usb_request *req)
44 return container_of(req, struct dwc2_hsotg_req, req);
47 static inline struct dwc2_hsotg_ep *our_ep(struct usb_ep *ep)
49 return container_of(ep, struct dwc2_hsotg_ep, ep);
52 static inline struct dwc2_hsotg *to_hsotg(struct usb_gadget *gadget)
54 return container_of(gadget, struct dwc2_hsotg, gadget);
57 static inline void __orr32(void __iomem *ptr, u32 val)
59 dwc2_writel(dwc2_readl(ptr) | val, ptr);
62 static inline void __bic32(void __iomem *ptr, u32 val)
64 dwc2_writel(dwc2_readl(ptr) & ~val, ptr);
67 static inline struct dwc2_hsotg_ep *index_to_ep(struct dwc2_hsotg *hsotg,
68 u32 ep_index, u32 dir_in)
71 return hsotg->eps_in[ep_index];
73 return hsotg->eps_out[ep_index];
76 /* forward declaration of functions */
77 static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg);
80 * using_dma - return the DMA status of the driver.
81 * @hsotg: The driver state.
83 * Return true if we're using DMA.
85 * Currently, we have the DMA support code worked into everywhere
86 * that needs it, but the AMBA DMA implementation in the hardware can
87 * only DMA from 32bit aligned addresses. This means that gadgets such
88 * as the CDC Ethernet cannot work as they often pass packets which are
91 * Unfortunately the choice to use DMA or not is global to the controller
92 * and seems to be only settable when the controller is being put through
93 * a core reset. This means we either need to fix the gadgets to take
94 * account of DMA alignment, or add bounce buffers (yuerk).
96 * g_using_dma is set depending on dts flag.
98 static inline bool using_dma(struct dwc2_hsotg *hsotg)
100 return hsotg->g_using_dma;
104 * dwc2_hsotg_en_gsint - enable one or more of the general interrupt
105 * @hsotg: The device state
106 * @ints: A bitmask of the interrupts to enable
108 static void dwc2_hsotg_en_gsint(struct dwc2_hsotg *hsotg, u32 ints)
110 u32 gsintmsk = dwc2_readl(hsotg->regs + GINTMSK);
113 new_gsintmsk = gsintmsk | ints;
115 if (new_gsintmsk != gsintmsk) {
116 dev_dbg(hsotg->dev, "gsintmsk now 0x%08x\n", new_gsintmsk);
117 dwc2_writel(new_gsintmsk, hsotg->regs + GINTMSK);
122 * dwc2_hsotg_disable_gsint - disable one or more of the general interrupt
123 * @hsotg: The device state
124 * @ints: A bitmask of the interrupts to enable
126 static void dwc2_hsotg_disable_gsint(struct dwc2_hsotg *hsotg, u32 ints)
128 u32 gsintmsk = dwc2_readl(hsotg->regs + GINTMSK);
131 new_gsintmsk = gsintmsk & ~ints;
133 if (new_gsintmsk != gsintmsk)
134 dwc2_writel(new_gsintmsk, hsotg->regs + GINTMSK);
138 * dwc2_hsotg_ctrl_epint - enable/disable an endpoint irq
139 * @hsotg: The device state
140 * @ep: The endpoint index
141 * @dir_in: True if direction is in.
142 * @en: The enable value, true to enable
144 * Set or clear the mask for an individual endpoint's interrupt
147 static void dwc2_hsotg_ctrl_epint(struct dwc2_hsotg *hsotg,
148 unsigned int ep, unsigned int dir_in,
158 local_irq_save(flags);
159 daint = dwc2_readl(hsotg->regs + DAINTMSK);
164 dwc2_writel(daint, hsotg->regs + DAINTMSK);
165 local_irq_restore(flags);
169 * dwc2_hsotg_init_fifo - initialise non-periodic FIFOs
170 * @hsotg: The device instance.
172 static void dwc2_hsotg_init_fifo(struct dwc2_hsotg *hsotg)
179 /* Reset fifo map if not correctly cleared during previous session */
180 WARN_ON(hsotg->fifo_map);
183 /* set RX/NPTX FIFO sizes */
184 dwc2_writel(hsotg->g_rx_fifo_sz, hsotg->regs + GRXFSIZ);
185 dwc2_writel((hsotg->g_rx_fifo_sz << FIFOSIZE_STARTADDR_SHIFT) |
186 (hsotg->g_np_g_tx_fifo_sz << FIFOSIZE_DEPTH_SHIFT),
187 hsotg->regs + GNPTXFSIZ);
190 * arange all the rest of the TX FIFOs, as some versions of this
191 * block have overlapping default addresses. This also ensures
192 * that if the settings have been changed, then they are set to
196 /* start at the end of the GNPTXFSIZ, rounded up */
197 addr = hsotg->g_rx_fifo_sz + hsotg->g_np_g_tx_fifo_sz;
200 * Configure fifos sizes from provided configuration and assign
201 * them to endpoints dynamically according to maxpacket size value of
204 for (ep = 1; ep < MAX_EPS_CHANNELS; ep++) {
205 if (!hsotg->g_tx_fifo_sz[ep])
208 val |= hsotg->g_tx_fifo_sz[ep] << FIFOSIZE_DEPTH_SHIFT;
209 WARN_ONCE(addr + hsotg->g_tx_fifo_sz[ep] > hsotg->fifo_mem,
210 "insufficient fifo memory");
211 addr += hsotg->g_tx_fifo_sz[ep];
213 dwc2_writel(val, hsotg->regs + DPTXFSIZN(ep));
217 * according to p428 of the design guide, we need to ensure that
218 * all fifos are flushed before continuing
221 dwc2_writel(GRSTCTL_TXFNUM(0x10) | GRSTCTL_TXFFLSH |
222 GRSTCTL_RXFFLSH, hsotg->regs + GRSTCTL);
224 /* wait until the fifos are both flushed */
227 val = dwc2_readl(hsotg->regs + GRSTCTL);
229 if ((val & (GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH)) == 0)
232 if (--timeout == 0) {
234 "%s: timeout flushing fifos (GRSTCTL=%08x)\n",
242 dev_dbg(hsotg->dev, "FIFOs reset, timeout at %d\n", timeout);
246 * @ep: USB endpoint to allocate request for.
247 * @flags: Allocation flags
249 * Allocate a new USB request structure appropriate for the specified endpoint
251 static struct usb_request *dwc2_hsotg_ep_alloc_request(struct usb_ep *ep,
254 struct dwc2_hsotg_req *req;
256 req = kzalloc(sizeof(struct dwc2_hsotg_req), flags);
260 INIT_LIST_HEAD(&req->queue);
266 * is_ep_periodic - return true if the endpoint is in periodic mode.
267 * @hs_ep: The endpoint to query.
269 * Returns true if the endpoint is in periodic mode, meaning it is being
270 * used for an Interrupt or ISO transfer.
272 static inline int is_ep_periodic(struct dwc2_hsotg_ep *hs_ep)
274 return hs_ep->periodic;
278 * dwc2_hsotg_unmap_dma - unmap the DMA memory being used for the request
279 * @hsotg: The device state.
280 * @hs_ep: The endpoint for the request
281 * @hs_req: The request being processed.
283 * This is the reverse of dwc2_hsotg_map_dma(), called for the completion
284 * of a request to ensure the buffer is ready for access by the caller.
286 static void dwc2_hsotg_unmap_dma(struct dwc2_hsotg *hsotg,
287 struct dwc2_hsotg_ep *hs_ep,
288 struct dwc2_hsotg_req *hs_req)
290 struct usb_request *req = &hs_req->req;
292 /* ignore this if we're not moving any data */
293 if (hs_req->req.length == 0)
296 usb_gadget_unmap_request(&hsotg->gadget, req, hs_ep->dir_in);
300 * dwc2_hsotg_write_fifo - write packet Data to the TxFIFO
301 * @hsotg: The controller state.
302 * @hs_ep: The endpoint we're going to write for.
303 * @hs_req: The request to write data for.
305 * This is called when the TxFIFO has some space in it to hold a new
306 * transmission and we have something to give it. The actual setup of
307 * the data size is done elsewhere, so all we have to do is to actually
310 * The return value is zero if there is more space (or nothing was done)
311 * otherwise -ENOSPC is returned if the FIFO space was used up.
313 * This routine is only needed for PIO
315 static int dwc2_hsotg_write_fifo(struct dwc2_hsotg *hsotg,
316 struct dwc2_hsotg_ep *hs_ep,
317 struct dwc2_hsotg_req *hs_req)
319 bool periodic = is_ep_periodic(hs_ep);
320 u32 gnptxsts = dwc2_readl(hsotg->regs + GNPTXSTS);
321 int buf_pos = hs_req->req.actual;
322 int to_write = hs_ep->size_loaded;
328 to_write -= (buf_pos - hs_ep->last_load);
330 /* if there's nothing to write, get out early */
334 if (periodic && !hsotg->dedicated_fifos) {
335 u32 epsize = dwc2_readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
340 * work out how much data was loaded so we can calculate
341 * how much data is left in the fifo.
344 size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
347 * if shared fifo, we cannot write anything until the
348 * previous data has been completely sent.
350 if (hs_ep->fifo_load != 0) {
351 dwc2_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP);
355 dev_dbg(hsotg->dev, "%s: left=%d, load=%d, fifo=%d, size %d\n",
357 hs_ep->size_loaded, hs_ep->fifo_load, hs_ep->fifo_size);
359 /* how much of the data has moved */
360 size_done = hs_ep->size_loaded - size_left;
362 /* how much data is left in the fifo */
363 can_write = hs_ep->fifo_load - size_done;
364 dev_dbg(hsotg->dev, "%s: => can_write1=%d\n",
365 __func__, can_write);
367 can_write = hs_ep->fifo_size - can_write;
368 dev_dbg(hsotg->dev, "%s: => can_write2=%d\n",
369 __func__, can_write);
371 if (can_write <= 0) {
372 dwc2_hsotg_en_gsint(hsotg, GINTSTS_PTXFEMP);
375 } else if (hsotg->dedicated_fifos && hs_ep->index != 0) {
376 can_write = dwc2_readl(hsotg->regs + DTXFSTS(hs_ep->index));
381 if (GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(gnptxsts) == 0) {
383 "%s: no queue slots available (0x%08x)\n",
386 dwc2_hsotg_en_gsint(hsotg, GINTSTS_NPTXFEMP);
390 can_write = GNPTXSTS_NP_TXF_SPC_AVAIL_GET(gnptxsts);
391 can_write *= 4; /* fifo size is in 32bit quantities. */
394 max_transfer = hs_ep->ep.maxpacket * hs_ep->mc;
396 dev_dbg(hsotg->dev, "%s: GNPTXSTS=%08x, can=%d, to=%d, max_transfer %d\n",
397 __func__, gnptxsts, can_write, to_write, max_transfer);
400 * limit to 512 bytes of data, it seems at least on the non-periodic
401 * FIFO, requests of >512 cause the endpoint to get stuck with a
402 * fragment of the end of the transfer in it.
404 if (can_write > 512 && !periodic)
408 * limit the write to one max-packet size worth of data, but allow
409 * the transfer to return that it did not run out of fifo space
412 if (to_write > max_transfer) {
413 to_write = max_transfer;
415 /* it's needed only when we do not use dedicated fifos */
416 if (!hsotg->dedicated_fifos)
417 dwc2_hsotg_en_gsint(hsotg,
418 periodic ? GINTSTS_PTXFEMP :
422 /* see if we can write data */
424 if (to_write > can_write) {
425 to_write = can_write;
426 pkt_round = to_write % max_transfer;
429 * Round the write down to an
430 * exact number of packets.
432 * Note, we do not currently check to see if we can ever
433 * write a full packet or not to the FIFO.
437 to_write -= pkt_round;
440 * enable correct FIFO interrupt to alert us when there
444 /* it's needed only when we do not use dedicated fifos */
445 if (!hsotg->dedicated_fifos)
446 dwc2_hsotg_en_gsint(hsotg,
447 periodic ? GINTSTS_PTXFEMP :
451 dev_dbg(hsotg->dev, "write %d/%d, can_write %d, done %d\n",
452 to_write, hs_req->req.length, can_write, buf_pos);
457 hs_req->req.actual = buf_pos + to_write;
458 hs_ep->total_data += to_write;
461 hs_ep->fifo_load += to_write;
463 to_write = DIV_ROUND_UP(to_write, 4);
464 data = hs_req->req.buf + buf_pos;
466 iowrite32_rep(hsotg->regs + EPFIFO(hs_ep->index), data, to_write);
468 return (to_write >= can_write) ? -ENOSPC : 0;
472 * get_ep_limit - get the maximum data legnth for this endpoint
473 * @hs_ep: The endpoint
475 * Return the maximum data that can be queued in one go on a given endpoint
476 * so that transfers that are too long can be split.
478 static unsigned get_ep_limit(struct dwc2_hsotg_ep *hs_ep)
480 int index = hs_ep->index;
485 maxsize = DXEPTSIZ_XFERSIZE_LIMIT + 1;
486 maxpkt = DXEPTSIZ_PKTCNT_LIMIT + 1;
490 maxpkt = DIEPTSIZ0_PKTCNT_LIMIT + 1;
495 /* we made the constant loading easier above by using +1 */
500 * constrain by packet count if maxpkts*pktsize is greater
501 * than the length register size.
504 if ((maxpkt * hs_ep->ep.maxpacket) < maxsize)
505 maxsize = maxpkt * hs_ep->ep.maxpacket;
511 * dwc2_hsotg_start_req - start a USB request from an endpoint's queue
512 * @hsotg: The controller state.
513 * @hs_ep: The endpoint to process a request for
514 * @hs_req: The request to start.
515 * @continuing: True if we are doing more for the current request.
517 * Start the given request running by setting the endpoint registers
518 * appropriately, and writing any data to the FIFOs.
520 static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
521 struct dwc2_hsotg_ep *hs_ep,
522 struct dwc2_hsotg_req *hs_req,
525 struct usb_request *ureq = &hs_req->req;
526 int index = hs_ep->index;
527 int dir_in = hs_ep->dir_in;
537 if (hs_ep->req && !continuing) {
538 dev_err(hsotg->dev, "%s: active request\n", __func__);
541 } else if (hs_ep->req != hs_req && continuing) {
543 "%s: continue different req\n", __func__);
549 epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
550 epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
552 dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n",
553 __func__, dwc2_readl(hsotg->regs + epctrl_reg), index,
554 hs_ep->dir_in ? "in" : "out");
556 /* If endpoint is stalled, we will restart request later */
557 ctrl = dwc2_readl(hsotg->regs + epctrl_reg);
559 if (index && ctrl & DXEPCTL_STALL) {
560 dev_warn(hsotg->dev, "%s: ep%d is stalled\n", __func__, index);
564 length = ureq->length - ureq->actual;
565 dev_dbg(hsotg->dev, "ureq->length:%d ureq->actual:%d\n",
566 ureq->length, ureq->actual);
568 maxreq = get_ep_limit(hs_ep);
569 if (length > maxreq) {
570 int round = maxreq % hs_ep->ep.maxpacket;
572 dev_dbg(hsotg->dev, "%s: length %d, max-req %d, r %d\n",
573 __func__, length, maxreq, round);
575 /* round down to multiple of packets */
583 packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket);
585 packets = 1; /* send one packet if length is zero. */
587 if (hs_ep->isochronous && length > (hs_ep->mc * hs_ep->ep.maxpacket)) {
588 dev_err(hsotg->dev, "req length > maxpacket*mc\n");
592 if (dir_in && index != 0)
593 if (hs_ep->isochronous)
594 epsize = DXEPTSIZ_MC(packets);
596 epsize = DXEPTSIZ_MC(1);
601 * zero length packet should be programmed on its own and should not
602 * be counted in DIEPTSIZ.PktCnt with other packets.
604 if (dir_in && ureq->zero && !continuing) {
605 /* Test if zlp is actually required. */
606 if ((ureq->length >= hs_ep->ep.maxpacket) &&
607 !(ureq->length % hs_ep->ep.maxpacket))
611 epsize |= DXEPTSIZ_PKTCNT(packets);
612 epsize |= DXEPTSIZ_XFERSIZE(length);
614 dev_dbg(hsotg->dev, "%s: %d@%d/%d, 0x%08x => 0x%08x\n",
615 __func__, packets, length, ureq->length, epsize, epsize_reg);
617 /* store the request as the current one we're doing */
620 /* write size / packets */
621 dwc2_writel(epsize, hsotg->regs + epsize_reg);
623 if (using_dma(hsotg) && !continuing) {
624 unsigned int dma_reg;
627 * write DMA address to control register, buffer already
628 * synced by dwc2_hsotg_ep_queue().
631 dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index);
632 dwc2_writel(ureq->dma, hsotg->regs + dma_reg);
634 dev_dbg(hsotg->dev, "%s: %pad => 0x%08x\n",
635 __func__, &ureq->dma, dma_reg);
638 ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */
639 ctrl |= DXEPCTL_USBACTEP;
641 dev_dbg(hsotg->dev, "ep0 state:%d\n", hsotg->ep0_state);
643 /* For Setup request do not clear NAK */
644 if (!(index == 0 && hsotg->ep0_state == DWC2_EP0_SETUP))
645 ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */
647 dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
648 dwc2_writel(ctrl, hsotg->regs + epctrl_reg);
651 * set these, it seems that DMA support increments past the end
652 * of the packet buffer so we need to calculate the length from
655 hs_ep->size_loaded = length;
656 hs_ep->last_load = ureq->actual;
658 if (dir_in && !using_dma(hsotg)) {
659 /* set these anyway, we may need them for non-periodic in */
660 hs_ep->fifo_load = 0;
662 dwc2_hsotg_write_fifo(hsotg, hs_ep, hs_req);
666 * clear the INTknTXFEmpMsk when we start request, more as a aide
667 * to debugging to see what is going on.
670 dwc2_writel(DIEPMSK_INTKNTXFEMPMSK,
671 hsotg->regs + DIEPINT(index));
674 * Note, trying to clear the NAK here causes problems with transmit
675 * on the S3C6400 ending up with the TXFIFO becoming full.
678 /* check ep is enabled */
679 if (!(dwc2_readl(hsotg->regs + epctrl_reg) & DXEPCTL_EPENA))
681 "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n",
682 index, dwc2_readl(hsotg->regs + epctrl_reg));
684 dev_dbg(hsotg->dev, "%s: DXEPCTL=0x%08x\n",
685 __func__, dwc2_readl(hsotg->regs + epctrl_reg));
687 /* enable ep interrupts */
688 dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 1);
692 * dwc2_hsotg_map_dma - map the DMA memory being used for the request
693 * @hsotg: The device state.
694 * @hs_ep: The endpoint the request is on.
695 * @req: The request being processed.
697 * We've been asked to queue a request, so ensure that the memory buffer
698 * is correctly setup for DMA. If we've been passed an extant DMA address
699 * then ensure the buffer has been synced to memory. If our buffer has no
700 * DMA memory, then we map the memory and mark our request to allow us to
701 * cleanup on completion.
703 static int dwc2_hsotg_map_dma(struct dwc2_hsotg *hsotg,
704 struct dwc2_hsotg_ep *hs_ep,
705 struct usb_request *req)
707 struct dwc2_hsotg_req *hs_req = our_req(req);
710 /* if the length is zero, ignore the DMA data */
711 if (hs_req->req.length == 0)
714 ret = usb_gadget_map_request(&hsotg->gadget, req, hs_ep->dir_in);
721 dev_err(hsotg->dev, "%s: failed to map buffer %p, %d bytes\n",
722 __func__, req->buf, req->length);
727 static int dwc2_hsotg_handle_unaligned_buf_start(struct dwc2_hsotg *hsotg,
728 struct dwc2_hsotg_ep *hs_ep, struct dwc2_hsotg_req *hs_req)
730 void *req_buf = hs_req->req.buf;
732 /* If dma is not being used or buffer is aligned */
733 if (!using_dma(hsotg) || !((long)req_buf & 3))
736 WARN_ON(hs_req->saved_req_buf);
738 dev_dbg(hsotg->dev, "%s: %s: buf=%p length=%d\n", __func__,
739 hs_ep->ep.name, req_buf, hs_req->req.length);
741 hs_req->req.buf = kmalloc(hs_req->req.length, GFP_ATOMIC);
742 if (!hs_req->req.buf) {
743 hs_req->req.buf = req_buf;
745 "%s: unable to allocate memory for bounce buffer\n",
750 /* Save actual buffer */
751 hs_req->saved_req_buf = req_buf;
754 memcpy(hs_req->req.buf, req_buf, hs_req->req.length);
758 static void dwc2_hsotg_handle_unaligned_buf_complete(struct dwc2_hsotg *hsotg,
759 struct dwc2_hsotg_ep *hs_ep, struct dwc2_hsotg_req *hs_req)
761 /* If dma is not being used or buffer was aligned */
762 if (!using_dma(hsotg) || !hs_req->saved_req_buf)
765 dev_dbg(hsotg->dev, "%s: %s: status=%d actual-length=%d\n", __func__,
766 hs_ep->ep.name, hs_req->req.status, hs_req->req.actual);
768 /* Copy data from bounce buffer on successful out transfer */
769 if (!hs_ep->dir_in && !hs_req->req.status)
770 memcpy(hs_req->saved_req_buf, hs_req->req.buf,
773 /* Free bounce buffer */
774 kfree(hs_req->req.buf);
776 hs_req->req.buf = hs_req->saved_req_buf;
777 hs_req->saved_req_buf = NULL;
780 static int dwc2_hsotg_ep_queue(struct usb_ep *ep, struct usb_request *req,
783 struct dwc2_hsotg_req *hs_req = our_req(req);
784 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
785 struct dwc2_hsotg *hs = hs_ep->parent;
789 dev_dbg(hs->dev, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n",
790 ep->name, req, req->length, req->buf, req->no_interrupt,
791 req->zero, req->short_not_ok);
793 /* Prevent new request submission when controller is suspended */
794 if (hs->lx_state == DWC2_L2) {
795 dev_dbg(hs->dev, "%s: don't submit request while suspended\n",
800 /* initialise status of the request */
801 INIT_LIST_HEAD(&hs_req->queue);
803 req->status = -EINPROGRESS;
805 ret = dwc2_hsotg_handle_unaligned_buf_start(hs, hs_ep, hs_req);
809 /* if we're using DMA, sync the buffers as necessary */
811 ret = dwc2_hsotg_map_dma(hs, hs_ep, req);
816 first = list_empty(&hs_ep->queue);
817 list_add_tail(&hs_req->queue, &hs_ep->queue);
820 dwc2_hsotg_start_req(hs, hs_ep, hs_req, false);
825 static int dwc2_hsotg_ep_queue_lock(struct usb_ep *ep, struct usb_request *req,
828 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
829 struct dwc2_hsotg *hs = hs_ep->parent;
830 unsigned long flags = 0;
833 spin_lock_irqsave(&hs->lock, flags);
834 ret = dwc2_hsotg_ep_queue(ep, req, gfp_flags);
835 spin_unlock_irqrestore(&hs->lock, flags);
840 static void dwc2_hsotg_ep_free_request(struct usb_ep *ep,
841 struct usb_request *req)
843 struct dwc2_hsotg_req *hs_req = our_req(req);
849 * dwc2_hsotg_complete_oursetup - setup completion callback
850 * @ep: The endpoint the request was on.
851 * @req: The request completed.
853 * Called on completion of any requests the driver itself
854 * submitted that need cleaning up.
856 static void dwc2_hsotg_complete_oursetup(struct usb_ep *ep,
857 struct usb_request *req)
859 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
860 struct dwc2_hsotg *hsotg = hs_ep->parent;
862 dev_dbg(hsotg->dev, "%s: ep %p, req %p\n", __func__, ep, req);
864 dwc2_hsotg_ep_free_request(ep, req);
868 * ep_from_windex - convert control wIndex value to endpoint
869 * @hsotg: The driver state.
870 * @windex: The control request wIndex field (in host order).
872 * Convert the given wIndex into a pointer to an driver endpoint
873 * structure, or return NULL if it is not a valid endpoint.
875 static struct dwc2_hsotg_ep *ep_from_windex(struct dwc2_hsotg *hsotg,
878 struct dwc2_hsotg_ep *ep;
879 int dir = (windex & USB_DIR_IN) ? 1 : 0;
880 int idx = windex & 0x7F;
885 if (idx > hsotg->num_of_eps)
888 ep = index_to_ep(hsotg, idx, dir);
890 if (idx && ep->dir_in != dir)
897 * dwc2_hsotg_set_test_mode - Enable usb Test Modes
898 * @hsotg: The driver state.
899 * @testmode: requested usb test mode
900 * Enable usb Test Mode requested by the Host.
902 int dwc2_hsotg_set_test_mode(struct dwc2_hsotg *hsotg, int testmode)
904 int dctl = dwc2_readl(hsotg->regs + DCTL);
906 dctl &= ~DCTL_TSTCTL_MASK;
913 dctl |= testmode << DCTL_TSTCTL_SHIFT;
918 dwc2_writel(dctl, hsotg->regs + DCTL);
923 * dwc2_hsotg_send_reply - send reply to control request
924 * @hsotg: The device state
926 * @buff: Buffer for request
927 * @length: Length of reply.
929 * Create a request and queue it on the given endpoint. This is useful as
930 * an internal method of sending replies to certain control requests, etc.
932 static int dwc2_hsotg_send_reply(struct dwc2_hsotg *hsotg,
933 struct dwc2_hsotg_ep *ep,
937 struct usb_request *req;
940 dev_dbg(hsotg->dev, "%s: buff %p, len %d\n", __func__, buff, length);
942 req = dwc2_hsotg_ep_alloc_request(&ep->ep, GFP_ATOMIC);
943 hsotg->ep0_reply = req;
945 dev_warn(hsotg->dev, "%s: cannot alloc req\n", __func__);
949 req->buf = hsotg->ep0_buff;
950 req->length = length;
952 * zero flag is for sending zlp in DATA IN stage. It has no impact on
956 req->complete = dwc2_hsotg_complete_oursetup;
959 memcpy(req->buf, buff, length);
961 ret = dwc2_hsotg_ep_queue(&ep->ep, req, GFP_ATOMIC);
963 dev_warn(hsotg->dev, "%s: cannot queue req\n", __func__);
971 * dwc2_hsotg_process_req_status - process request GET_STATUS
972 * @hsotg: The device state
973 * @ctrl: USB control request
975 static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg,
976 struct usb_ctrlrequest *ctrl)
978 struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
979 struct dwc2_hsotg_ep *ep;
983 dev_dbg(hsotg->dev, "%s: USB_REQ_GET_STATUS\n", __func__);
986 dev_warn(hsotg->dev, "%s: direction out?\n", __func__);
990 switch (ctrl->bRequestType & USB_RECIP_MASK) {
991 case USB_RECIP_DEVICE:
992 reply = cpu_to_le16(0); /* bit 0 => self powered,
993 * bit 1 => remote wakeup */
996 case USB_RECIP_INTERFACE:
997 /* currently, the data result should be zero */
998 reply = cpu_to_le16(0);
1001 case USB_RECIP_ENDPOINT:
1002 ep = ep_from_windex(hsotg, le16_to_cpu(ctrl->wIndex));
1006 reply = cpu_to_le16(ep->halted ? 1 : 0);
1013 if (le16_to_cpu(ctrl->wLength) != 2)
1016 ret = dwc2_hsotg_send_reply(hsotg, ep0, &reply, 2);
1018 dev_err(hsotg->dev, "%s: failed to send reply\n", __func__);
1025 static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value);
1028 * get_ep_head - return the first request on the endpoint
1029 * @hs_ep: The controller endpoint to get
1031 * Get the first request on the endpoint.
1033 static struct dwc2_hsotg_req *get_ep_head(struct dwc2_hsotg_ep *hs_ep)
1035 if (list_empty(&hs_ep->queue))
1038 return list_first_entry(&hs_ep->queue, struct dwc2_hsotg_req, queue);
1042 * dwc2_hsotg_process_req_feature - process request {SET,CLEAR}_FEATURE
1043 * @hsotg: The device state
1044 * @ctrl: USB control request
1046 static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg,
1047 struct usb_ctrlrequest *ctrl)
1049 struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
1050 struct dwc2_hsotg_req *hs_req;
1052 bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE);
1053 struct dwc2_hsotg_ep *ep;
1060 dev_dbg(hsotg->dev, "%s: %s_FEATURE\n",
1061 __func__, set ? "SET" : "CLEAR");
1063 wValue = le16_to_cpu(ctrl->wValue);
1064 wIndex = le16_to_cpu(ctrl->wIndex);
1065 recip = ctrl->bRequestType & USB_RECIP_MASK;
1068 case USB_RECIP_DEVICE:
1070 case USB_DEVICE_TEST_MODE:
1071 if ((wIndex & 0xff) != 0)
1076 hsotg->test_mode = wIndex >> 8;
1077 ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
1080 "%s: failed to send reply\n", __func__);
1089 case USB_RECIP_ENDPOINT:
1090 ep = ep_from_windex(hsotg, wIndex);
1092 dev_dbg(hsotg->dev, "%s: no endpoint for 0x%04x\n",
1098 case USB_ENDPOINT_HALT:
1099 halted = ep->halted;
1101 dwc2_hsotg_ep_sethalt(&ep->ep, set);
1103 ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
1106 "%s: failed to send reply\n", __func__);
1111 * we have to complete all requests for ep if it was
1112 * halted, and the halt was cleared by CLEAR_FEATURE
1115 if (!set && halted) {
1117 * If we have request in progress,
1123 list_del_init(&hs_req->queue);
1124 if (hs_req->req.complete) {
1125 spin_unlock(&hsotg->lock);
1126 usb_gadget_giveback_request(
1127 &ep->ep, &hs_req->req);
1128 spin_lock(&hsotg->lock);
1132 /* If we have pending request, then start it */
1134 restart = !list_empty(&ep->queue);
1136 hs_req = get_ep_head(ep);
1137 dwc2_hsotg_start_req(hsotg, ep,
1155 static void dwc2_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg);
1158 * dwc2_hsotg_stall_ep0 - stall ep0
1159 * @hsotg: The device state
1161 * Set stall for ep0 as response for setup request.
1163 static void dwc2_hsotg_stall_ep0(struct dwc2_hsotg *hsotg)
1165 struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
1169 dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in);
1170 reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0;
1173 * DxEPCTL_Stall will be cleared by EP once it has
1174 * taken effect, so no need to clear later.
1177 ctrl = dwc2_readl(hsotg->regs + reg);
1178 ctrl |= DXEPCTL_STALL;
1179 ctrl |= DXEPCTL_CNAK;
1180 dwc2_writel(ctrl, hsotg->regs + reg);
1183 "written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n",
1184 ctrl, reg, dwc2_readl(hsotg->regs + reg));
1187 * complete won't be called, so we enqueue
1188 * setup request here
1190 dwc2_hsotg_enqueue_setup(hsotg);
1194 * dwc2_hsotg_process_control - process a control request
1195 * @hsotg: The device state
1196 * @ctrl: The control request received
1198 * The controller has received the SETUP phase of a control request, and
1199 * needs to work out what to do next (and whether to pass it on to the
1202 static void dwc2_hsotg_process_control(struct dwc2_hsotg *hsotg,
1203 struct usb_ctrlrequest *ctrl)
1205 struct dwc2_hsotg_ep *ep0 = hsotg->eps_out[0];
1210 "ctrl Type=%02x, Req=%02x, V=%04x, I=%04x, L=%04x\n",
1211 ctrl->bRequestType, ctrl->bRequest, ctrl->wValue,
1212 ctrl->wIndex, ctrl->wLength);
1214 if (ctrl->wLength == 0) {
1216 hsotg->ep0_state = DWC2_EP0_STATUS_IN;
1217 } else if (ctrl->bRequestType & USB_DIR_IN) {
1219 hsotg->ep0_state = DWC2_EP0_DATA_IN;
1222 hsotg->ep0_state = DWC2_EP0_DATA_OUT;
1225 if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
1226 switch (ctrl->bRequest) {
1227 case USB_REQ_SET_ADDRESS:
1228 hsotg->connected = 1;
1229 dcfg = dwc2_readl(hsotg->regs + DCFG);
1230 dcfg &= ~DCFG_DEVADDR_MASK;
1231 dcfg |= (le16_to_cpu(ctrl->wValue) <<
1232 DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK;
1233 dwc2_writel(dcfg, hsotg->regs + DCFG);
1235 dev_info(hsotg->dev, "new address %d\n", ctrl->wValue);
1237 ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0);
1240 case USB_REQ_GET_STATUS:
1241 ret = dwc2_hsotg_process_req_status(hsotg, ctrl);
1244 case USB_REQ_CLEAR_FEATURE:
1245 case USB_REQ_SET_FEATURE:
1246 ret = dwc2_hsotg_process_req_feature(hsotg, ctrl);
1251 /* as a fallback, try delivering it to the driver to deal with */
1253 if (ret == 0 && hsotg->driver) {
1254 spin_unlock(&hsotg->lock);
1255 ret = hsotg->driver->setup(&hsotg->gadget, ctrl);
1256 spin_lock(&hsotg->lock);
1258 dev_dbg(hsotg->dev, "driver->setup() ret %d\n", ret);
1262 * the request is either unhandlable, or is not formatted correctly
1263 * so respond with a STALL for the status stage to indicate failure.
1267 dwc2_hsotg_stall_ep0(hsotg);
1271 * dwc2_hsotg_complete_setup - completion of a setup transfer
1272 * @ep: The endpoint the request was on.
1273 * @req: The request completed.
1275 * Called on completion of any requests the driver itself submitted for
1278 static void dwc2_hsotg_complete_setup(struct usb_ep *ep,
1279 struct usb_request *req)
1281 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
1282 struct dwc2_hsotg *hsotg = hs_ep->parent;
1284 if (req->status < 0) {
1285 dev_dbg(hsotg->dev, "%s: failed %d\n", __func__, req->status);
1289 spin_lock(&hsotg->lock);
1290 if (req->actual == 0)
1291 dwc2_hsotg_enqueue_setup(hsotg);
1293 dwc2_hsotg_process_control(hsotg, req->buf);
1294 spin_unlock(&hsotg->lock);
1298 * dwc2_hsotg_enqueue_setup - start a request for EP0 packets
1299 * @hsotg: The device state.
1301 * Enqueue a request on EP0 if necessary to received any SETUP packets
1302 * received from the host.
1304 static void dwc2_hsotg_enqueue_setup(struct dwc2_hsotg *hsotg)
1306 struct usb_request *req = hsotg->ctrl_req;
1307 struct dwc2_hsotg_req *hs_req = our_req(req);
1310 dev_dbg(hsotg->dev, "%s: queueing setup request\n", __func__);
1314 req->buf = hsotg->ctrl_buff;
1315 req->complete = dwc2_hsotg_complete_setup;
1317 if (!list_empty(&hs_req->queue)) {
1318 dev_dbg(hsotg->dev, "%s already queued???\n", __func__);
1322 hsotg->eps_out[0]->dir_in = 0;
1323 hsotg->eps_out[0]->send_zlp = 0;
1324 hsotg->ep0_state = DWC2_EP0_SETUP;
1326 ret = dwc2_hsotg_ep_queue(&hsotg->eps_out[0]->ep, req, GFP_ATOMIC);
1328 dev_err(hsotg->dev, "%s: failed queue (%d)\n", __func__, ret);
1330 * Don't think there's much we can do other than watch the
1336 static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg,
1337 struct dwc2_hsotg_ep *hs_ep)
1340 u8 index = hs_ep->index;
1341 u32 epctl_reg = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index);
1342 u32 epsiz_reg = hs_ep->dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index);
1345 dev_dbg(hsotg->dev, "Sending zero-length packet on ep%d\n",
1348 dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n",
1351 dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
1352 DXEPTSIZ_XFERSIZE(0), hsotg->regs +
1355 ctrl = dwc2_readl(hsotg->regs + epctl_reg);
1356 ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */
1357 ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */
1358 ctrl |= DXEPCTL_USBACTEP;
1359 dwc2_writel(ctrl, hsotg->regs + epctl_reg);
1363 * dwc2_hsotg_complete_request - complete a request given to us
1364 * @hsotg: The device state.
1365 * @hs_ep: The endpoint the request was on.
1366 * @hs_req: The request to complete.
1367 * @result: The result code (0 => Ok, otherwise errno)
1369 * The given request has finished, so call the necessary completion
1370 * if it has one and then look to see if we can start a new request
1373 * Note, expects the ep to already be locked as appropriate.
1375 static void dwc2_hsotg_complete_request(struct dwc2_hsotg *hsotg,
1376 struct dwc2_hsotg_ep *hs_ep,
1377 struct dwc2_hsotg_req *hs_req,
1383 dev_dbg(hsotg->dev, "%s: nothing to complete?\n", __func__);
1387 dev_dbg(hsotg->dev, "complete: ep %p %s, req %p, %d => %p\n",
1388 hs_ep, hs_ep->ep.name, hs_req, result, hs_req->req.complete);
1391 * only replace the status if we've not already set an error
1392 * from a previous transaction
1395 if (hs_req->req.status == -EINPROGRESS)
1396 hs_req->req.status = result;
1398 if (using_dma(hsotg))
1399 dwc2_hsotg_unmap_dma(hsotg, hs_ep, hs_req);
1401 dwc2_hsotg_handle_unaligned_buf_complete(hsotg, hs_ep, hs_req);
1404 list_del_init(&hs_req->queue);
1407 * call the complete request with the locks off, just in case the
1408 * request tries to queue more work for this endpoint.
1411 if (hs_req->req.complete) {
1412 spin_unlock(&hsotg->lock);
1413 usb_gadget_giveback_request(&hs_ep->ep, &hs_req->req);
1414 spin_lock(&hsotg->lock);
1418 * Look to see if there is anything else to do. Note, the completion
1419 * of the previous request may have caused a new request to be started
1420 * so be careful when doing this.
1423 if (!hs_ep->req && result >= 0) {
1424 restart = !list_empty(&hs_ep->queue);
1426 hs_req = get_ep_head(hs_ep);
1427 dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, false);
1433 * dwc2_hsotg_rx_data - receive data from the FIFO for an endpoint
1434 * @hsotg: The device state.
1435 * @ep_idx: The endpoint index for the data
1436 * @size: The size of data in the fifo, in bytes
1438 * The FIFO status shows there is data to read from the FIFO for a given
1439 * endpoint, so sort out whether we need to read the data into a request
1440 * that has been made for that endpoint.
1442 static void dwc2_hsotg_rx_data(struct dwc2_hsotg *hsotg, int ep_idx, int size)
1444 struct dwc2_hsotg_ep *hs_ep = hsotg->eps_out[ep_idx];
1445 struct dwc2_hsotg_req *hs_req = hs_ep->req;
1446 void __iomem *fifo = hsotg->regs + EPFIFO(ep_idx);
1453 u32 epctl = dwc2_readl(hsotg->regs + DOEPCTL(ep_idx));
1457 "%s: FIFO %d bytes on ep%d but no req (DXEPCTl=0x%08x)\n",
1458 __func__, size, ep_idx, epctl);
1460 /* dump the data from the FIFO, we've nothing we can do */
1461 for (ptr = 0; ptr < size; ptr += 4)
1462 (void)dwc2_readl(fifo);
1468 read_ptr = hs_req->req.actual;
1469 max_req = hs_req->req.length - read_ptr;
1471 dev_dbg(hsotg->dev, "%s: read %d/%d, done %d/%d\n",
1472 __func__, to_read, max_req, read_ptr, hs_req->req.length);
1474 if (to_read > max_req) {
1476 * more data appeared than we where willing
1477 * to deal with in this request.
1480 /* currently we don't deal this */
1484 hs_ep->total_data += to_read;
1485 hs_req->req.actual += to_read;
1486 to_read = DIV_ROUND_UP(to_read, 4);
1489 * note, we might over-write the buffer end by 3 bytes depending on
1490 * alignment of the data.
1492 ioread32_rep(fifo, hs_req->req.buf + read_ptr, to_read);
1496 * dwc2_hsotg_ep0_zlp - send/receive zero-length packet on control endpoint
1497 * @hsotg: The device instance
1498 * @dir_in: If IN zlp
1500 * Generate a zero-length IN packet request for terminating a SETUP
1503 * Note, since we don't write any data to the TxFIFO, then it is
1504 * currently believed that we do not need to wait for any space in
1507 static void dwc2_hsotg_ep0_zlp(struct dwc2_hsotg *hsotg, bool dir_in)
1509 /* eps_out[0] is used in both directions */
1510 hsotg->eps_out[0]->dir_in = dir_in;
1511 hsotg->ep0_state = dir_in ? DWC2_EP0_STATUS_IN : DWC2_EP0_STATUS_OUT;
1513 dwc2_hsotg_program_zlp(hsotg, hsotg->eps_out[0]);
1516 static void dwc2_hsotg_change_ep_iso_parity(struct dwc2_hsotg *hsotg,
1521 ctrl = dwc2_readl(hsotg->regs + epctl_reg);
1522 if (ctrl & DXEPCTL_EOFRNUM)
1523 ctrl |= DXEPCTL_SETEVENFR;
1525 ctrl |= DXEPCTL_SETODDFR;
1526 dwc2_writel(ctrl, hsotg->regs + epctl_reg);
1530 * dwc2_hsotg_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO
1531 * @hsotg: The device instance
1532 * @epnum: The endpoint received from
1534 * The RXFIFO has delivered an OutDone event, which means that the data
1535 * transfer for an OUT endpoint has been completed, either by a short
1536 * packet or by the finish of a transfer.
1538 static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum)
1540 u32 epsize = dwc2_readl(hsotg->regs + DOEPTSIZ(epnum));
1541 struct dwc2_hsotg_ep *hs_ep = hsotg->eps_out[epnum];
1542 struct dwc2_hsotg_req *hs_req = hs_ep->req;
1543 struct usb_request *req = &hs_req->req;
1544 unsigned size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
1548 dev_dbg(hsotg->dev, "%s: no request active\n", __func__);
1552 if (epnum == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_OUT) {
1553 dev_dbg(hsotg->dev, "zlp packet received\n");
1554 dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
1555 dwc2_hsotg_enqueue_setup(hsotg);
1559 if (using_dma(hsotg)) {
1563 * Calculate the size of the transfer by checking how much
1564 * is left in the endpoint size register and then working it
1565 * out from the amount we loaded for the transfer.
1567 * We need to do this as DMA pointers are always 32bit aligned
1568 * so may overshoot/undershoot the transfer.
1571 size_done = hs_ep->size_loaded - size_left;
1572 size_done += hs_ep->last_load;
1574 req->actual = size_done;
1577 /* if there is more request to do, schedule new transfer */
1578 if (req->actual < req->length && size_left == 0) {
1579 dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, true);
1583 if (req->actual < req->length && req->short_not_ok) {
1584 dev_dbg(hsotg->dev, "%s: got %d/%d (short not ok) => error\n",
1585 __func__, req->actual, req->length);
1588 * todo - what should we return here? there's no one else
1589 * even bothering to check the status.
1593 if (epnum == 0 && hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
1594 /* Move to STATUS IN */
1595 dwc2_hsotg_ep0_zlp(hsotg, true);
1600 * Slave mode OUT transfers do not go through XferComplete so
1601 * adjust the ISOC parity here.
1603 if (!using_dma(hsotg)) {
1604 hs_ep->has_correct_parity = 1;
1605 if (hs_ep->isochronous && hs_ep->interval == 1)
1606 dwc2_hsotg_change_ep_iso_parity(hsotg, DOEPCTL(epnum));
1609 dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
1613 * dwc2_hsotg_read_frameno - read current frame number
1614 * @hsotg: The device instance
1616 * Return the current frame number
1618 static u32 dwc2_hsotg_read_frameno(struct dwc2_hsotg *hsotg)
1622 dsts = dwc2_readl(hsotg->regs + DSTS);
1623 dsts &= DSTS_SOFFN_MASK;
1624 dsts >>= DSTS_SOFFN_SHIFT;
1630 * dwc2_hsotg_handle_rx - RX FIFO has data
1631 * @hsotg: The device instance
1633 * The IRQ handler has detected that the RX FIFO has some data in it
1634 * that requires processing, so find out what is in there and do the
1637 * The RXFIFO is a true FIFO, the packets coming out are still in packet
1638 * chunks, so if you have x packets received on an endpoint you'll get x
1639 * FIFO events delivered, each with a packet's worth of data in it.
1641 * When using DMA, we should not be processing events from the RXFIFO
1642 * as the actual data should be sent to the memory directly and we turn
1643 * on the completion interrupts to get notifications of transfer completion.
1645 static void dwc2_hsotg_handle_rx(struct dwc2_hsotg *hsotg)
1647 u32 grxstsr = dwc2_readl(hsotg->regs + GRXSTSP);
1648 u32 epnum, status, size;
1650 WARN_ON(using_dma(hsotg));
1652 epnum = grxstsr & GRXSTS_EPNUM_MASK;
1653 status = grxstsr & GRXSTS_PKTSTS_MASK;
1655 size = grxstsr & GRXSTS_BYTECNT_MASK;
1656 size >>= GRXSTS_BYTECNT_SHIFT;
1658 dev_dbg(hsotg->dev, "%s: GRXSTSP=0x%08x (%d@%d)\n",
1659 __func__, grxstsr, size, epnum);
1661 switch ((status & GRXSTS_PKTSTS_MASK) >> GRXSTS_PKTSTS_SHIFT) {
1662 case GRXSTS_PKTSTS_GLOBALOUTNAK:
1663 dev_dbg(hsotg->dev, "GLOBALOUTNAK\n");
1666 case GRXSTS_PKTSTS_OUTDONE:
1667 dev_dbg(hsotg->dev, "OutDone (Frame=0x%08x)\n",
1668 dwc2_hsotg_read_frameno(hsotg));
1670 if (!using_dma(hsotg))
1671 dwc2_hsotg_handle_outdone(hsotg, epnum);
1674 case GRXSTS_PKTSTS_SETUPDONE:
1676 "SetupDone (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
1677 dwc2_hsotg_read_frameno(hsotg),
1678 dwc2_readl(hsotg->regs + DOEPCTL(0)));
1680 * Call dwc2_hsotg_handle_outdone here if it was not called from
1681 * GRXSTS_PKTSTS_OUTDONE. That is, if the core didn't
1682 * generate GRXSTS_PKTSTS_OUTDONE for setup packet.
1684 if (hsotg->ep0_state == DWC2_EP0_SETUP)
1685 dwc2_hsotg_handle_outdone(hsotg, epnum);
1688 case GRXSTS_PKTSTS_OUTRX:
1689 dwc2_hsotg_rx_data(hsotg, epnum, size);
1692 case GRXSTS_PKTSTS_SETUPRX:
1694 "SetupRX (Frame=0x%08x, DOPEPCTL=0x%08x)\n",
1695 dwc2_hsotg_read_frameno(hsotg),
1696 dwc2_readl(hsotg->regs + DOEPCTL(0)));
1698 WARN_ON(hsotg->ep0_state != DWC2_EP0_SETUP);
1700 dwc2_hsotg_rx_data(hsotg, epnum, size);
1704 dev_warn(hsotg->dev, "%s: unknown status %08x\n",
1707 dwc2_hsotg_dump(hsotg);
1713 * dwc2_hsotg_ep0_mps - turn max packet size into register setting
1714 * @mps: The maximum packet size in bytes.
1716 static u32 dwc2_hsotg_ep0_mps(unsigned int mps)
1720 return D0EPCTL_MPS_64;
1722 return D0EPCTL_MPS_32;
1724 return D0EPCTL_MPS_16;
1726 return D0EPCTL_MPS_8;
1729 /* bad max packet size, warn and return invalid result */
1735 * dwc2_hsotg_set_ep_maxpacket - set endpoint's max-packet field
1736 * @hsotg: The driver state.
1737 * @ep: The index number of the endpoint
1738 * @mps: The maximum packet size in bytes
1740 * Configure the maximum packet size for the given endpoint, updating
1741 * the hardware control registers to reflect this.
1743 static void dwc2_hsotg_set_ep_maxpacket(struct dwc2_hsotg *hsotg,
1744 unsigned int ep, unsigned int mps, unsigned int dir_in)
1746 struct dwc2_hsotg_ep *hs_ep;
1747 void __iomem *regs = hsotg->regs;
1752 hs_ep = index_to_ep(hsotg, ep, dir_in);
1757 /* EP0 is a special case */
1758 mpsval = dwc2_hsotg_ep0_mps(mps);
1761 hs_ep->ep.maxpacket = mps;
1764 mpsval = mps & DXEPCTL_MPS_MASK;
1767 mcval = ((mps >> 11) & 0x3) + 1;
1771 hs_ep->ep.maxpacket = mpsval;
1775 reg = dwc2_readl(regs + DIEPCTL(ep));
1776 reg &= ~DXEPCTL_MPS_MASK;
1778 dwc2_writel(reg, regs + DIEPCTL(ep));
1780 reg = dwc2_readl(regs + DOEPCTL(ep));
1781 reg &= ~DXEPCTL_MPS_MASK;
1783 dwc2_writel(reg, regs + DOEPCTL(ep));
1789 dev_err(hsotg->dev, "ep%d: bad mps of %d\n", ep, mps);
1793 * dwc2_hsotg_txfifo_flush - flush Tx FIFO
1794 * @hsotg: The driver state
1795 * @idx: The index for the endpoint (0..15)
1797 static void dwc2_hsotg_txfifo_flush(struct dwc2_hsotg *hsotg, unsigned int idx)
1802 dwc2_writel(GRSTCTL_TXFNUM(idx) | GRSTCTL_TXFFLSH,
1803 hsotg->regs + GRSTCTL);
1805 /* wait until the fifo is flushed */
1809 val = dwc2_readl(hsotg->regs + GRSTCTL);
1811 if ((val & (GRSTCTL_TXFFLSH)) == 0)
1814 if (--timeout == 0) {
1816 "%s: timeout flushing fifo (GRSTCTL=%08x)\n",
1826 * dwc2_hsotg_trytx - check to see if anything needs transmitting
1827 * @hsotg: The driver state
1828 * @hs_ep: The driver endpoint to check.
1830 * Check to see if there is a request that has data to send, and if so
1831 * make an attempt to write data into the FIFO.
1833 static int dwc2_hsotg_trytx(struct dwc2_hsotg *hsotg,
1834 struct dwc2_hsotg_ep *hs_ep)
1836 struct dwc2_hsotg_req *hs_req = hs_ep->req;
1838 if (!hs_ep->dir_in || !hs_req) {
1840 * if request is not enqueued, we disable interrupts
1841 * for endpoints, excepting ep0
1843 if (hs_ep->index != 0)
1844 dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index,
1849 if (hs_req->req.actual < hs_req->req.length) {
1850 dev_dbg(hsotg->dev, "trying to write more for ep%d\n",
1852 return dwc2_hsotg_write_fifo(hsotg, hs_ep, hs_req);
1859 * dwc2_hsotg_complete_in - complete IN transfer
1860 * @hsotg: The device state.
1861 * @hs_ep: The endpoint that has just completed.
1863 * An IN transfer has been completed, update the transfer's state and then
1864 * call the relevant completion routines.
1866 static void dwc2_hsotg_complete_in(struct dwc2_hsotg *hsotg,
1867 struct dwc2_hsotg_ep *hs_ep)
1869 struct dwc2_hsotg_req *hs_req = hs_ep->req;
1870 u32 epsize = dwc2_readl(hsotg->regs + DIEPTSIZ(hs_ep->index));
1871 int size_left, size_done;
1874 dev_dbg(hsotg->dev, "XferCompl but no req\n");
1878 /* Finish ZLP handling for IN EP0 transactions */
1879 if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_STATUS_IN) {
1880 dev_dbg(hsotg->dev, "zlp packet sent\n");
1881 dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
1882 if (hsotg->test_mode) {
1885 ret = dwc2_hsotg_set_test_mode(hsotg, hsotg->test_mode);
1887 dev_dbg(hsotg->dev, "Invalid Test #%d\n",
1889 dwc2_hsotg_stall_ep0(hsotg);
1893 dwc2_hsotg_enqueue_setup(hsotg);
1898 * Calculate the size of the transfer by checking how much is left
1899 * in the endpoint size register and then working it out from
1900 * the amount we loaded for the transfer.
1902 * We do this even for DMA, as the transfer may have incremented
1903 * past the end of the buffer (DMA transfers are always 32bit
1907 size_left = DXEPTSIZ_XFERSIZE_GET(epsize);
1909 size_done = hs_ep->size_loaded - size_left;
1910 size_done += hs_ep->last_load;
1912 if (hs_req->req.actual != size_done)
1913 dev_dbg(hsotg->dev, "%s: adjusting size done %d => %d\n",
1914 __func__, hs_req->req.actual, size_done);
1916 hs_req->req.actual = size_done;
1917 dev_dbg(hsotg->dev, "req->length:%d req->actual:%d req->zero:%d\n",
1918 hs_req->req.length, hs_req->req.actual, hs_req->req.zero);
1920 if (!size_left && hs_req->req.actual < hs_req->req.length) {
1921 dev_dbg(hsotg->dev, "%s trying more for req...\n", __func__);
1922 dwc2_hsotg_start_req(hsotg, hs_ep, hs_req, true);
1926 /* Zlp for all endpoints, for ep0 only in DATA IN stage */
1927 if (hs_ep->send_zlp) {
1928 dwc2_hsotg_program_zlp(hsotg, hs_ep);
1929 hs_ep->send_zlp = 0;
1930 /* transfer will be completed on next complete interrupt */
1934 if (hs_ep->index == 0 && hsotg->ep0_state == DWC2_EP0_DATA_IN) {
1935 /* Move to STATUS OUT */
1936 dwc2_hsotg_ep0_zlp(hsotg, false);
1940 dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, 0);
1944 * dwc2_hsotg_epint - handle an in/out endpoint interrupt
1945 * @hsotg: The driver state
1946 * @idx: The index for the endpoint (0..15)
1947 * @dir_in: Set if this is an IN endpoint
1949 * Process and clear any interrupt pending for an individual endpoint
1951 static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
1954 struct dwc2_hsotg_ep *hs_ep = index_to_ep(hsotg, idx, dir_in);
1955 u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx);
1956 u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx);
1957 u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx);
1961 ints = dwc2_readl(hsotg->regs + epint_reg);
1962 ctrl = dwc2_readl(hsotg->regs + epctl_reg);
1964 /* Clear endpoint interrupts */
1965 dwc2_writel(ints, hsotg->regs + epint_reg);
1968 dev_err(hsotg->dev, "%s:Interrupt for unconfigured ep%d(%s)\n",
1969 __func__, idx, dir_in ? "in" : "out");
1973 dev_dbg(hsotg->dev, "%s: ep%d(%s) DxEPINT=0x%08x\n",
1974 __func__, idx, dir_in ? "in" : "out", ints);
1976 /* Don't process XferCompl interrupt if it is a setup packet */
1977 if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD)))
1978 ints &= ~DXEPINT_XFERCOMPL;
1980 if (ints & DXEPINT_XFERCOMPL) {
1981 hs_ep->has_correct_parity = 1;
1982 if (hs_ep->isochronous && hs_ep->interval == 1)
1983 dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
1986 "%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n",
1987 __func__, dwc2_readl(hsotg->regs + epctl_reg),
1988 dwc2_readl(hsotg->regs + epsiz_reg));
1991 * we get OutDone from the FIFO, so we only need to look
1992 * at completing IN requests here
1995 dwc2_hsotg_complete_in(hsotg, hs_ep);
1997 if (idx == 0 && !hs_ep->req)
1998 dwc2_hsotg_enqueue_setup(hsotg);
1999 } else if (using_dma(hsotg)) {
2001 * We're using DMA, we need to fire an OutDone here
2002 * as we ignore the RXFIFO.
2005 dwc2_hsotg_handle_outdone(hsotg, idx);
2009 if (ints & DXEPINT_EPDISBLD) {
2010 dev_dbg(hsotg->dev, "%s: EPDisbld\n", __func__);
2013 int epctl = dwc2_readl(hsotg->regs + epctl_reg);
2015 dwc2_hsotg_txfifo_flush(hsotg, hs_ep->fifo_index);
2017 if ((epctl & DXEPCTL_STALL) &&
2018 (epctl & DXEPCTL_EPTYPE_BULK)) {
2019 int dctl = dwc2_readl(hsotg->regs + DCTL);
2021 dctl |= DCTL_CGNPINNAK;
2022 dwc2_writel(dctl, hsotg->regs + DCTL);
2027 if (ints & DXEPINT_AHBERR)
2028 dev_dbg(hsotg->dev, "%s: AHBErr\n", __func__);
2030 if (ints & DXEPINT_SETUP) { /* Setup or Timeout */
2031 dev_dbg(hsotg->dev, "%s: Setup/Timeout\n", __func__);
2033 if (using_dma(hsotg) && idx == 0) {
2035 * this is the notification we've received a
2036 * setup packet. In non-DMA mode we'd get this
2037 * from the RXFIFO, instead we need to process
2044 dwc2_hsotg_handle_outdone(hsotg, 0);
2048 if (ints & DXEPINT_BACK2BACKSETUP)
2049 dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
2051 if (dir_in && !hs_ep->isochronous) {
2052 /* not sure if this is important, but we'll clear it anyway */
2053 if (ints & DIEPMSK_INTKNTXFEMPMSK) {
2054 dev_dbg(hsotg->dev, "%s: ep%d: INTknTXFEmpMsk\n",
2058 /* this probably means something bad is happening */
2059 if (ints & DIEPMSK_INTKNEPMISMSK) {
2060 dev_warn(hsotg->dev, "%s: ep%d: INTknEP\n",
2064 /* FIFO has space or is empty (see GAHBCFG) */
2065 if (hsotg->dedicated_fifos &&
2066 ints & DIEPMSK_TXFIFOEMPTY) {
2067 dev_dbg(hsotg->dev, "%s: ep%d: TxFIFOEmpty\n",
2069 if (!using_dma(hsotg))
2070 dwc2_hsotg_trytx(hsotg, hs_ep);
2076 * dwc2_hsotg_irq_enumdone - Handle EnumDone interrupt (enumeration done)
2077 * @hsotg: The device state.
2079 * Handle updating the device settings after the enumeration phase has
2082 static void dwc2_hsotg_irq_enumdone(struct dwc2_hsotg *hsotg)
2084 u32 dsts = dwc2_readl(hsotg->regs + DSTS);
2085 int ep0_mps = 0, ep_mps = 8;
2088 * This should signal the finish of the enumeration phase
2089 * of the USB handshaking, so we should now know what rate
2093 dev_dbg(hsotg->dev, "EnumDone (DSTS=0x%08x)\n", dsts);
2096 * note, since we're limited by the size of transfer on EP0, and
2097 * it seems IN transfers must be a even number of packets we do
2098 * not advertise a 64byte MPS on EP0.
2101 /* catch both EnumSpd_FS and EnumSpd_FS48 */
2102 switch (dsts & DSTS_ENUMSPD_MASK) {
2103 case DSTS_ENUMSPD_FS:
2104 case DSTS_ENUMSPD_FS48:
2105 hsotg->gadget.speed = USB_SPEED_FULL;
2106 ep0_mps = EP0_MPS_LIMIT;
2110 case DSTS_ENUMSPD_HS:
2111 hsotg->gadget.speed = USB_SPEED_HIGH;
2112 ep0_mps = EP0_MPS_LIMIT;
2116 case DSTS_ENUMSPD_LS:
2117 hsotg->gadget.speed = USB_SPEED_LOW;
2119 * note, we don't actually support LS in this driver at the
2120 * moment, and the documentation seems to imply that it isn't
2121 * supported by the PHYs on some of the devices.
2125 dev_info(hsotg->dev, "new device is %s\n",
2126 usb_speed_string(hsotg->gadget.speed));
2129 * we should now know the maximum packet size for an
2130 * endpoint, so set the endpoints to a default value.
2135 /* Initialize ep0 for both in and out directions */
2136 dwc2_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 1);
2137 dwc2_hsotg_set_ep_maxpacket(hsotg, 0, ep0_mps, 0);
2138 for (i = 1; i < hsotg->num_of_eps; i++) {
2139 if (hsotg->eps_in[i])
2140 dwc2_hsotg_set_ep_maxpacket(hsotg, i, ep_mps, 1);
2141 if (hsotg->eps_out[i])
2142 dwc2_hsotg_set_ep_maxpacket(hsotg, i, ep_mps, 0);
2146 /* ensure after enumeration our EP0 is active */
2148 dwc2_hsotg_enqueue_setup(hsotg);
2150 dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
2151 dwc2_readl(hsotg->regs + DIEPCTL0),
2152 dwc2_readl(hsotg->regs + DOEPCTL0));
2156 * kill_all_requests - remove all requests from the endpoint's queue
2157 * @hsotg: The device state.
2158 * @ep: The endpoint the requests may be on.
2159 * @result: The result code to use.
2161 * Go through the requests on the given endpoint and mark them
2162 * completed with the given result code.
2164 static void kill_all_requests(struct dwc2_hsotg *hsotg,
2165 struct dwc2_hsotg_ep *ep,
2168 struct dwc2_hsotg_req *req, *treq;
2173 list_for_each_entry_safe(req, treq, &ep->queue, queue)
2174 dwc2_hsotg_complete_request(hsotg, ep, req,
2177 if (!hsotg->dedicated_fifos)
2179 size = (dwc2_readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4;
2180 if (size < ep->fifo_size)
2181 dwc2_hsotg_txfifo_flush(hsotg, ep->fifo_index);
2185 * dwc2_hsotg_disconnect - disconnect service
2186 * @hsotg: The device state.
2188 * The device has been disconnected. Remove all current
2189 * transactions and signal the gadget driver that this
2192 void dwc2_hsotg_disconnect(struct dwc2_hsotg *hsotg)
2196 if (!hsotg->connected)
2199 hsotg->connected = 0;
2200 hsotg->test_mode = 0;
2202 for (ep = 0; ep < hsotg->num_of_eps; ep++) {
2203 if (hsotg->eps_in[ep])
2204 kill_all_requests(hsotg, hsotg->eps_in[ep],
2206 if (hsotg->eps_out[ep])
2207 kill_all_requests(hsotg, hsotg->eps_out[ep],
2211 call_gadget(hsotg, disconnect);
2212 hsotg->lx_state = DWC2_L3;
2216 * dwc2_hsotg_irq_fifoempty - TX FIFO empty interrupt handler
2217 * @hsotg: The device state:
2218 * @periodic: True if this is a periodic FIFO interrupt
2220 static void dwc2_hsotg_irq_fifoempty(struct dwc2_hsotg *hsotg, bool periodic)
2222 struct dwc2_hsotg_ep *ep;
2225 /* look through for any more data to transmit */
2226 for (epno = 0; epno < hsotg->num_of_eps; epno++) {
2227 ep = index_to_ep(hsotg, epno, 1);
2235 if ((periodic && !ep->periodic) ||
2236 (!periodic && ep->periodic))
2239 ret = dwc2_hsotg_trytx(hsotg, ep);
2245 /* IRQ flags which will trigger a retry around the IRQ loop */
2246 #define IRQ_RETRY_MASK (GINTSTS_NPTXFEMP | \
2251 * dwc2_hsotg_corereset - issue softreset to the core
2252 * @hsotg: The device state
2254 * Issue a soft reset to the core, and await the core finishing it.
2256 static int dwc2_hsotg_corereset(struct dwc2_hsotg *hsotg)
2261 dev_dbg(hsotg->dev, "resetting core\n");
2263 /* issue soft reset */
2264 dwc2_writel(GRSTCTL_CSFTRST, hsotg->regs + GRSTCTL);
2268 grstctl = dwc2_readl(hsotg->regs + GRSTCTL);
2269 } while ((grstctl & GRSTCTL_CSFTRST) && timeout-- > 0);
2271 if (grstctl & GRSTCTL_CSFTRST) {
2272 dev_err(hsotg->dev, "Failed to get CSftRst asserted\n");
2279 u32 grstctl = dwc2_readl(hsotg->regs + GRSTCTL);
2281 if (timeout-- < 0) {
2282 dev_info(hsotg->dev,
2283 "%s: reset failed, GRSTCTL=%08x\n",
2288 if (!(grstctl & GRSTCTL_AHBIDLE))
2291 break; /* reset done */
2294 dev_dbg(hsotg->dev, "reset successful\n");
2299 * dwc2_hsotg_core_init - issue softreset to the core
2300 * @hsotg: The device state
2302 * Issue a soft reset to the core, and await the core finishing it.
2304 void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
2310 /* Kill any ep0 requests as controller will be reinitialized */
2311 kill_all_requests(hsotg, hsotg->eps_out[0], -ECONNRESET);
2314 if (dwc2_hsotg_corereset(hsotg))
2318 * we must now enable ep0 ready for host detection and then
2319 * set configuration.
2322 /* set the PLL on, remove the HNP/SRP and set the PHY */
2323 val = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
2324 dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
2325 (val << GUSBCFG_USBTRDTIM_SHIFT), hsotg->regs + GUSBCFG);
2327 dwc2_hsotg_init_fifo(hsotg);
2330 __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
2332 dwc2_writel(DCFG_EPMISCNT(1) | DCFG_DEVSPD_HS, hsotg->regs + DCFG);
2334 /* Clear any pending OTG interrupts */
2335 dwc2_writel(0xffffffff, hsotg->regs + GOTGINT);
2337 /* Clear any pending interrupts */
2338 dwc2_writel(0xffffffff, hsotg->regs + GINTSTS);
2339 intmsk = GINTSTS_ERLYSUSP | GINTSTS_SESSREQINT |
2340 GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF |
2341 GINTSTS_USBRST | GINTSTS_RESETDET |
2342 GINTSTS_ENUMDONE | GINTSTS_OTGINT |
2343 GINTSTS_USBSUSP | GINTSTS_WKUPINT |
2344 GINTSTS_INCOMPL_SOIN | GINTSTS_INCOMPL_SOOUT;
2346 if (hsotg->core_params->external_id_pin_ctl <= 0)
2347 intmsk |= GINTSTS_CONIDSTSCHNG;
2349 dwc2_writel(intmsk, hsotg->regs + GINTMSK);
2351 if (using_dma(hsotg))
2352 dwc2_writel(GAHBCFG_GLBL_INTR_EN | GAHBCFG_DMA_EN |
2353 (GAHBCFG_HBSTLEN_INCR4 << GAHBCFG_HBSTLEN_SHIFT),
2354 hsotg->regs + GAHBCFG);
2356 dwc2_writel(((hsotg->dedicated_fifos) ?
2357 (GAHBCFG_NP_TXF_EMP_LVL |
2358 GAHBCFG_P_TXF_EMP_LVL) : 0) |
2359 GAHBCFG_GLBL_INTR_EN, hsotg->regs + GAHBCFG);
2362 * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts
2363 * when we have no data to transfer. Otherwise we get being flooded by
2367 dwc2_writel(((hsotg->dedicated_fifos && !using_dma(hsotg)) ?
2368 DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK : 0) |
2369 DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK |
2370 DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
2371 DIEPMSK_INTKNEPMISMSK,
2372 hsotg->regs + DIEPMSK);
2375 * don't need XferCompl, we get that from RXFIFO in slave mode. In
2376 * DMA mode we may need this.
2378 dwc2_writel((using_dma(hsotg) ? (DIEPMSK_XFERCOMPLMSK |
2379 DIEPMSK_TIMEOUTMSK) : 0) |
2380 DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK |
2382 hsotg->regs + DOEPMSK);
2384 dwc2_writel(0, hsotg->regs + DAINTMSK);
2386 dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
2387 dwc2_readl(hsotg->regs + DIEPCTL0),
2388 dwc2_readl(hsotg->regs + DOEPCTL0));
2390 /* enable in and out endpoint interrupts */
2391 dwc2_hsotg_en_gsint(hsotg, GINTSTS_OEPINT | GINTSTS_IEPINT);
2394 * Enable the RXFIFO when in slave mode, as this is how we collect
2395 * the data. In DMA mode, we get events from the FIFO but also
2396 * things we cannot process, so do not use it.
2398 if (!using_dma(hsotg))
2399 dwc2_hsotg_en_gsint(hsotg, GINTSTS_RXFLVL);
2401 /* Enable interrupts for EP0 in and out */
2402 dwc2_hsotg_ctrl_epint(hsotg, 0, 0, 1);
2403 dwc2_hsotg_ctrl_epint(hsotg, 0, 1, 1);
2405 if (!is_usb_reset) {
2406 __orr32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE);
2407 udelay(10); /* see openiboot */
2408 __bic32(hsotg->regs + DCTL, DCTL_PWRONPRGDONE);
2411 dev_dbg(hsotg->dev, "DCTL=0x%08x\n", dwc2_readl(hsotg->regs + DCTL));
2414 * DxEPCTL_USBActEp says RO in manual, but seems to be set by
2415 * writing to the EPCTL register..
2418 /* set to read 1 8byte packet */
2419 dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
2420 DXEPTSIZ_XFERSIZE(8), hsotg->regs + DOEPTSIZ0);
2422 dwc2_writel(dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
2423 DXEPCTL_CNAK | DXEPCTL_EPENA |
2425 hsotg->regs + DOEPCTL0);
2427 /* enable, but don't activate EP0in */
2428 dwc2_writel(dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
2429 DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0);
2431 dwc2_hsotg_enqueue_setup(hsotg);
2433 dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
2434 dwc2_readl(hsotg->regs + DIEPCTL0),
2435 dwc2_readl(hsotg->regs + DOEPCTL0));
2437 /* clear global NAKs */
2438 val = DCTL_CGOUTNAK | DCTL_CGNPINNAK;
2440 val |= DCTL_SFTDISCON;
2441 __orr32(hsotg->regs + DCTL, val);
2443 /* must be at-least 3ms to allow bus to see disconnect */
2446 hsotg->lx_state = DWC2_L0;
2449 static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)
2451 /* set the soft-disconnect bit */
2452 __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
2455 void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg)
2457 /* remove the soft-disconnect and let's go */
2458 __bic32(hsotg->regs + DCTL, DCTL_SFTDISCON);
2462 * dwc2_hsotg_irq - handle device interrupt
2463 * @irq: The IRQ number triggered
2464 * @pw: The pw value when registered the handler.
2466 static irqreturn_t dwc2_hsotg_irq(int irq, void *pw)
2468 struct dwc2_hsotg *hsotg = pw;
2469 int retry_count = 8;
2473 spin_lock(&hsotg->lock);
2475 gintsts = dwc2_readl(hsotg->regs + GINTSTS);
2476 gintmsk = dwc2_readl(hsotg->regs + GINTMSK);
2478 dev_dbg(hsotg->dev, "%s: %08x %08x (%08x) retry %d\n",
2479 __func__, gintsts, gintsts & gintmsk, gintmsk, retry_count);
2483 if (gintsts & GINTSTS_RESETDET) {
2484 dev_dbg(hsotg->dev, "%s: USBRstDet\n", __func__);
2486 dwc2_writel(GINTSTS_RESETDET, hsotg->regs + GINTSTS);
2488 /* This event must be used only if controller is suspended */
2489 if (hsotg->lx_state == DWC2_L2) {
2490 dwc2_exit_hibernation(hsotg, true);
2491 hsotg->lx_state = DWC2_L0;
2495 if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) {
2497 u32 usb_status = dwc2_readl(hsotg->regs + GOTGCTL);
2498 u32 connected = hsotg->connected;
2500 dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
2501 dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
2502 dwc2_readl(hsotg->regs + GNPTXSTS));
2504 dwc2_writel(GINTSTS_USBRST, hsotg->regs + GINTSTS);
2506 /* Report disconnection if it is not already done. */
2507 dwc2_hsotg_disconnect(hsotg);
2509 if (usb_status & GOTGCTL_BSESVLD && connected)
2510 dwc2_hsotg_core_init_disconnected(hsotg, true);
2513 if (gintsts & GINTSTS_ENUMDONE) {
2514 dwc2_writel(GINTSTS_ENUMDONE, hsotg->regs + GINTSTS);
2516 dwc2_hsotg_irq_enumdone(hsotg);
2519 if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) {
2520 u32 daint = dwc2_readl(hsotg->regs + DAINT);
2521 u32 daintmsk = dwc2_readl(hsotg->regs + DAINTMSK);
2522 u32 daint_out, daint_in;
2526 daint_out = daint >> DAINT_OUTEP_SHIFT;
2527 daint_in = daint & ~(daint_out << DAINT_OUTEP_SHIFT);
2529 dev_dbg(hsotg->dev, "%s: daint=%08x\n", __func__, daint);
2531 for (ep = 0; ep < hsotg->num_of_eps && daint_out;
2532 ep++, daint_out >>= 1) {
2534 dwc2_hsotg_epint(hsotg, ep, 0);
2537 for (ep = 0; ep < hsotg->num_of_eps && daint_in;
2538 ep++, daint_in >>= 1) {
2540 dwc2_hsotg_epint(hsotg, ep, 1);
2544 /* check both FIFOs */
2546 if (gintsts & GINTSTS_NPTXFEMP) {
2547 dev_dbg(hsotg->dev, "NPTxFEmp\n");
2550 * Disable the interrupt to stop it happening again
2551 * unless one of these endpoint routines decides that
2552 * it needs re-enabling
2555 dwc2_hsotg_disable_gsint(hsotg, GINTSTS_NPTXFEMP);
2556 dwc2_hsotg_irq_fifoempty(hsotg, false);
2559 if (gintsts & GINTSTS_PTXFEMP) {
2560 dev_dbg(hsotg->dev, "PTxFEmp\n");
2562 /* See note in GINTSTS_NPTxFEmp */
2564 dwc2_hsotg_disable_gsint(hsotg, GINTSTS_PTXFEMP);
2565 dwc2_hsotg_irq_fifoempty(hsotg, true);
2568 if (gintsts & GINTSTS_RXFLVL) {
2570 * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty,
2571 * we need to retry dwc2_hsotg_handle_rx if this is still
2575 dwc2_hsotg_handle_rx(hsotg);
2578 if (gintsts & GINTSTS_ERLYSUSP) {
2579 dev_dbg(hsotg->dev, "GINTSTS_ErlySusp\n");
2580 dwc2_writel(GINTSTS_ERLYSUSP, hsotg->regs + GINTSTS);
2584 * these next two seem to crop-up occasionally causing the core
2585 * to shutdown the USB transfer, so try clearing them and logging
2589 if (gintsts & GINTSTS_GOUTNAKEFF) {
2590 dev_info(hsotg->dev, "GOUTNakEff triggered\n");
2592 dwc2_writel(DCTL_CGOUTNAK, hsotg->regs + DCTL);
2594 dwc2_hsotg_dump(hsotg);
2597 if (gintsts & GINTSTS_GINNAKEFF) {
2598 dev_info(hsotg->dev, "GINNakEff triggered\n");
2600 dwc2_writel(DCTL_CGNPINNAK, hsotg->regs + DCTL);
2602 dwc2_hsotg_dump(hsotg);
2605 if (gintsts & GINTSTS_INCOMPL_SOIN) {
2607 struct dwc2_hsotg_ep *hs_ep;
2609 dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOIN\n", __func__);
2610 for (idx = 1; idx < hsotg->num_of_eps; idx++) {
2611 hs_ep = hsotg->eps_in[idx];
2613 if (!hs_ep->isochronous || hs_ep->has_correct_parity)
2616 epctl_reg = DIEPCTL(idx);
2617 dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
2619 dwc2_writel(GINTSTS_INCOMPL_SOIN, hsotg->regs + GINTSTS);
2622 if (gintsts & GINTSTS_INCOMPL_SOOUT) {
2624 struct dwc2_hsotg_ep *hs_ep;
2626 dev_dbg(hsotg->dev, "%s: GINTSTS_INCOMPL_SOOUT\n", __func__);
2627 for (idx = 1; idx < hsotg->num_of_eps; idx++) {
2628 hs_ep = hsotg->eps_out[idx];
2630 if (!hs_ep->isochronous || hs_ep->has_correct_parity)
2633 epctl_reg = DOEPCTL(idx);
2634 dwc2_hsotg_change_ep_iso_parity(hsotg, epctl_reg);
2636 dwc2_writel(GINTSTS_INCOMPL_SOOUT, hsotg->regs + GINTSTS);
2640 * if we've had fifo events, we should try and go around the
2641 * loop again to see if there's any point in returning yet.
2644 if (gintsts & IRQ_RETRY_MASK && --retry_count > 0)
2647 spin_unlock(&hsotg->lock);
2653 * dwc2_hsotg_ep_enable - enable the given endpoint
2654 * @ep: The USB endpint to configure
2655 * @desc: The USB endpoint descriptor to configure with.
2657 * This is called from the USB gadget code's usb_ep_enable().
2659 static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
2660 const struct usb_endpoint_descriptor *desc)
2662 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
2663 struct dwc2_hsotg *hsotg = hs_ep->parent;
2664 unsigned long flags;
2665 unsigned int index = hs_ep->index;
2669 unsigned int dir_in;
2670 unsigned int i, val, size;
2674 "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n",
2675 __func__, ep->name, desc->bEndpointAddress, desc->bmAttributes,
2676 desc->wMaxPacketSize, desc->bInterval);
2678 /* not to be called for EP0 */
2679 WARN_ON(index == 0);
2681 dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0;
2682 if (dir_in != hs_ep->dir_in) {
2683 dev_err(hsotg->dev, "%s: direction mismatch!\n", __func__);
2687 mps = usb_endpoint_maxp(desc);
2689 /* note, we handle this here instead of dwc2_hsotg_set_ep_maxpacket */
2691 epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
2692 epctrl = dwc2_readl(hsotg->regs + epctrl_reg);
2694 dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x from 0x%08x\n",
2695 __func__, epctrl, epctrl_reg);
2697 spin_lock_irqsave(&hsotg->lock, flags);
2699 epctrl &= ~(DXEPCTL_EPTYPE_MASK | DXEPCTL_MPS_MASK);
2700 epctrl |= DXEPCTL_MPS(mps);
2703 * mark the endpoint as active, otherwise the core may ignore
2704 * transactions entirely for this endpoint
2706 epctrl |= DXEPCTL_USBACTEP;
2709 * set the NAK status on the endpoint, otherwise we might try and
2710 * do something with data that we've yet got a request to process
2711 * since the RXFIFO will take data for an endpoint even if the
2712 * size register hasn't been set.
2715 epctrl |= DXEPCTL_SNAK;
2717 /* update the endpoint state */
2718 dwc2_hsotg_set_ep_maxpacket(hsotg, hs_ep->index, mps, dir_in);
2720 /* default, set to non-periodic */
2721 hs_ep->isochronous = 0;
2722 hs_ep->periodic = 0;
2724 hs_ep->interval = desc->bInterval;
2725 hs_ep->has_correct_parity = 0;
2727 if (hs_ep->interval > 1 && hs_ep->mc > 1)
2728 dev_err(hsotg->dev, "MC > 1 when interval is not 1\n");
2730 switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
2731 case USB_ENDPOINT_XFER_ISOC:
2732 epctrl |= DXEPCTL_EPTYPE_ISO;
2733 epctrl |= DXEPCTL_SETEVENFR;
2734 hs_ep->isochronous = 1;
2736 hs_ep->periodic = 1;
2739 case USB_ENDPOINT_XFER_BULK:
2740 epctrl |= DXEPCTL_EPTYPE_BULK;
2743 case USB_ENDPOINT_XFER_INT:
2745 hs_ep->periodic = 1;
2747 epctrl |= DXEPCTL_EPTYPE_INTERRUPT;
2750 case USB_ENDPOINT_XFER_CONTROL:
2751 epctrl |= DXEPCTL_EPTYPE_CONTROL;
2755 /* If fifo is already allocated for this ep */
2756 if (hs_ep->fifo_index) {
2757 size = hs_ep->ep.maxpacket * hs_ep->mc;
2758 /* If bigger fifo is required deallocate current one */
2759 if (size > hs_ep->fifo_size) {
2760 hsotg->fifo_map &= ~(1 << hs_ep->fifo_index);
2761 hs_ep->fifo_index = 0;
2762 hs_ep->fifo_size = 0;
2767 * if the hardware has dedicated fifos, we must give each IN EP
2768 * a unique tx-fifo even if it is non-periodic.
2770 if (dir_in && hsotg->dedicated_fifos && !hs_ep->fifo_index) {
2772 u32 fifo_size = UINT_MAX;
2773 size = hs_ep->ep.maxpacket*hs_ep->mc;
2774 for (i = 1; i < hsotg->num_of_eps; ++i) {
2775 if (hsotg->fifo_map & (1<<i))
2777 val = dwc2_readl(hsotg->regs + DPTXFSIZN(i));
2778 val = (val >> FIFOSIZE_DEPTH_SHIFT)*4;
2781 /* Search for smallest acceptable fifo */
2782 if (val < fifo_size) {
2789 "%s: No suitable fifo found\n", __func__);
2793 hsotg->fifo_map |= 1 << fifo_index;
2794 epctrl |= DXEPCTL_TXFNUM(fifo_index);
2795 hs_ep->fifo_index = fifo_index;
2796 hs_ep->fifo_size = fifo_size;
2799 /* for non control endpoints, set PID to D0 */
2801 epctrl |= DXEPCTL_SETD0PID;
2803 dev_dbg(hsotg->dev, "%s: write DxEPCTL=0x%08x\n",
2806 dwc2_writel(epctrl, hsotg->regs + epctrl_reg);
2807 dev_dbg(hsotg->dev, "%s: read DxEPCTL=0x%08x\n",
2808 __func__, dwc2_readl(hsotg->regs + epctrl_reg));
2810 /* enable the endpoint interrupt */
2811 dwc2_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
2814 spin_unlock_irqrestore(&hsotg->lock, flags);
2819 * dwc2_hsotg_ep_disable - disable given endpoint
2820 * @ep: The endpoint to disable.
2822 static int dwc2_hsotg_ep_disable(struct usb_ep *ep)
2824 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
2825 struct dwc2_hsotg *hsotg = hs_ep->parent;
2826 int dir_in = hs_ep->dir_in;
2827 int index = hs_ep->index;
2828 unsigned long flags;
2832 dev_dbg(hsotg->dev, "%s(ep %p)\n", __func__, ep);
2834 if (ep == &hsotg->eps_out[0]->ep) {
2835 dev_err(hsotg->dev, "%s: called for ep0\n", __func__);
2839 epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index);
2841 spin_lock_irqsave(&hsotg->lock, flags);
2843 hsotg->fifo_map &= ~(1<<hs_ep->fifo_index);
2844 hs_ep->fifo_index = 0;
2845 hs_ep->fifo_size = 0;
2847 ctrl = dwc2_readl(hsotg->regs + epctrl_reg);
2848 ctrl &= ~DXEPCTL_EPENA;
2849 ctrl &= ~DXEPCTL_USBACTEP;
2850 ctrl |= DXEPCTL_SNAK;
2852 dev_dbg(hsotg->dev, "%s: DxEPCTL=0x%08x\n", __func__, ctrl);
2853 dwc2_writel(ctrl, hsotg->regs + epctrl_reg);
2855 /* disable endpoint interrupts */
2856 dwc2_hsotg_ctrl_epint(hsotg, hs_ep->index, hs_ep->dir_in, 0);
2858 /* terminate all requests with shutdown */
2859 kill_all_requests(hsotg, hs_ep, -ESHUTDOWN);
2861 spin_unlock_irqrestore(&hsotg->lock, flags);
2866 * on_list - check request is on the given endpoint
2867 * @ep: The endpoint to check.
2868 * @test: The request to test if it is on the endpoint.
2870 static bool on_list(struct dwc2_hsotg_ep *ep, struct dwc2_hsotg_req *test)
2872 struct dwc2_hsotg_req *req, *treq;
2874 list_for_each_entry_safe(req, treq, &ep->queue, queue) {
2882 static int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hs_otg, u32 reg,
2883 u32 bit, u32 timeout)
2887 for (i = 0; i < timeout; i++) {
2888 if (dwc2_readl(hs_otg->regs + reg) & bit)
2896 static void dwc2_hsotg_ep_stop_xfr(struct dwc2_hsotg *hsotg,
2897 struct dwc2_hsotg_ep *hs_ep)
2902 epctrl_reg = hs_ep->dir_in ? DIEPCTL(hs_ep->index) :
2903 DOEPCTL(hs_ep->index);
2904 epint_reg = hs_ep->dir_in ? DIEPINT(hs_ep->index) :
2905 DOEPINT(hs_ep->index);
2907 dev_dbg(hsotg->dev, "%s: stopping transfer on %s\n", __func__,
2909 if (hs_ep->dir_in) {
2910 __orr32(hsotg->regs + epctrl_reg, DXEPCTL_SNAK);
2911 /* Wait for Nak effect */
2912 if (dwc2_hsotg_wait_bit_set(hsotg, epint_reg,
2913 DXEPINT_INEPNAKEFF, 100))
2914 dev_warn(hsotg->dev,
2915 "%s: timeout DIEPINT.NAKEFF\n", __func__);
2917 /* Clear any pending nak effect interrupt */
2918 dwc2_writel(GINTSTS_GINNAKEFF, hsotg->regs + GINTSTS);
2920 __orr32(hsotg->regs + DCTL, DCTL_SGNPINNAK);
2922 /* Wait for global nak to take effect */
2923 if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS,
2924 GINTSTS_GINNAKEFF, 100))
2925 dev_warn(hsotg->dev,
2926 "%s: timeout GINTSTS.GINNAKEFF\n", __func__);
2930 __orr32(hsotg->regs + epctrl_reg, DXEPCTL_EPDIS | DXEPCTL_SNAK);
2932 /* Wait for ep to be disabled */
2933 if (dwc2_hsotg_wait_bit_set(hsotg, epint_reg, DXEPINT_EPDISBLD, 100))
2934 dev_warn(hsotg->dev,
2935 "%s: timeout DOEPCTL.EPDisable\n", __func__);
2937 if (hs_ep->dir_in) {
2938 if (hsotg->dedicated_fifos) {
2939 dwc2_writel(GRSTCTL_TXFNUM(hs_ep->fifo_index) |
2940 GRSTCTL_TXFFLSH, hsotg->regs + GRSTCTL);
2941 /* Wait for fifo flush */
2942 if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL,
2943 GRSTCTL_TXFFLSH, 100))
2944 dev_warn(hsotg->dev,
2945 "%s: timeout flushing fifos\n",
2948 /* TODO: Flush shared tx fifo */
2950 /* Remove global NAKs */
2951 __bic32(hsotg->regs + DCTL, DCTL_SGNPINNAK);
2956 * dwc2_hsotg_ep_dequeue - dequeue given endpoint
2957 * @ep: The endpoint to dequeue.
2958 * @req: The request to be removed from a queue.
2960 static int dwc2_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req)
2962 struct dwc2_hsotg_req *hs_req = our_req(req);
2963 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
2964 struct dwc2_hsotg *hs = hs_ep->parent;
2965 unsigned long flags;
2967 dev_dbg(hs->dev, "ep_dequeue(%p,%p)\n", ep, req);
2969 spin_lock_irqsave(&hs->lock, flags);
2971 if (!on_list(hs_ep, hs_req)) {
2972 spin_unlock_irqrestore(&hs->lock, flags);
2976 /* Dequeue already started request */
2977 if (req == &hs_ep->req->req)
2978 dwc2_hsotg_ep_stop_xfr(hs, hs_ep);
2980 dwc2_hsotg_complete_request(hs, hs_ep, hs_req, -ECONNRESET);
2981 spin_unlock_irqrestore(&hs->lock, flags);
2987 * dwc2_hsotg_ep_sethalt - set halt on a given endpoint
2988 * @ep: The endpoint to set halt.
2989 * @value: Set or unset the halt.
2991 static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value)
2993 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
2994 struct dwc2_hsotg *hs = hs_ep->parent;
2995 int index = hs_ep->index;
3000 dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value);
3004 dwc2_hsotg_stall_ep0(hs);
3007 "%s: can't clear halt on ep0\n", __func__);
3011 if (hs_ep->dir_in) {
3012 epreg = DIEPCTL(index);
3013 epctl = dwc2_readl(hs->regs + epreg);
3016 epctl |= DXEPCTL_STALL | DXEPCTL_SNAK;
3017 if (epctl & DXEPCTL_EPENA)
3018 epctl |= DXEPCTL_EPDIS;
3020 epctl &= ~DXEPCTL_STALL;
3021 xfertype = epctl & DXEPCTL_EPTYPE_MASK;
3022 if (xfertype == DXEPCTL_EPTYPE_BULK ||
3023 xfertype == DXEPCTL_EPTYPE_INTERRUPT)
3024 epctl |= DXEPCTL_SETD0PID;
3026 dwc2_writel(epctl, hs->regs + epreg);
3029 epreg = DOEPCTL(index);
3030 epctl = dwc2_readl(hs->regs + epreg);
3033 epctl |= DXEPCTL_STALL;
3035 epctl &= ~DXEPCTL_STALL;
3036 xfertype = epctl & DXEPCTL_EPTYPE_MASK;
3037 if (xfertype == DXEPCTL_EPTYPE_BULK ||
3038 xfertype == DXEPCTL_EPTYPE_INTERRUPT)
3039 epctl |= DXEPCTL_SETD0PID;
3041 dwc2_writel(epctl, hs->regs + epreg);
3044 hs_ep->halted = value;
3050 * dwc2_hsotg_ep_sethalt_lock - set halt on a given endpoint with lock held
3051 * @ep: The endpoint to set halt.
3052 * @value: Set or unset the halt.
3054 static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value)
3056 struct dwc2_hsotg_ep *hs_ep = our_ep(ep);
3057 struct dwc2_hsotg *hs = hs_ep->parent;
3058 unsigned long flags = 0;
3061 spin_lock_irqsave(&hs->lock, flags);
3062 ret = dwc2_hsotg_ep_sethalt(ep, value);
3063 spin_unlock_irqrestore(&hs->lock, flags);
3068 static struct usb_ep_ops dwc2_hsotg_ep_ops = {
3069 .enable = dwc2_hsotg_ep_enable,
3070 .disable = dwc2_hsotg_ep_disable,
3071 .alloc_request = dwc2_hsotg_ep_alloc_request,
3072 .free_request = dwc2_hsotg_ep_free_request,
3073 .queue = dwc2_hsotg_ep_queue_lock,
3074 .dequeue = dwc2_hsotg_ep_dequeue,
3075 .set_halt = dwc2_hsotg_ep_sethalt_lock,
3076 /* note, don't believe we have any call for the fifo routines */
3080 * dwc2_hsotg_phy_enable - enable platform phy dev
3081 * @hsotg: The driver state
3083 * A wrapper for platform code responsible for controlling
3084 * low-level USB code
3086 static void dwc2_hsotg_phy_enable(struct dwc2_hsotg *hsotg)
3088 struct platform_device *pdev = to_platform_device(hsotg->dev);
3090 dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
3093 usb_phy_init(hsotg->uphy);
3094 else if (hsotg->plat && hsotg->plat->phy_init)
3095 hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
3097 phy_init(hsotg->phy);
3098 phy_power_on(hsotg->phy);
3103 * dwc2_hsotg_phy_disable - disable platform phy dev
3104 * @hsotg: The driver state
3106 * A wrapper for platform code responsible for controlling
3107 * low-level USB code
3109 static void dwc2_hsotg_phy_disable(struct dwc2_hsotg *hsotg)
3111 struct platform_device *pdev = to_platform_device(hsotg->dev);
3114 usb_phy_shutdown(hsotg->uphy);
3115 else if (hsotg->plat && hsotg->plat->phy_exit)
3116 hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
3118 phy_power_off(hsotg->phy);
3119 phy_exit(hsotg->phy);
3124 * dwc2_hsotg_init - initalize the usb core
3125 * @hsotg: The driver state
3127 static void dwc2_hsotg_init(struct dwc2_hsotg *hsotg)
3130 /* unmask subset of endpoint interrupts */
3132 dwc2_writel(DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK |
3133 DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK,
3134 hsotg->regs + DIEPMSK);
3136 dwc2_writel(DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK |
3137 DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK,
3138 hsotg->regs + DOEPMSK);
3140 dwc2_writel(0, hsotg->regs + DAINTMSK);
3142 /* Be in disconnected state until gadget is registered */
3143 __orr32(hsotg->regs + DCTL, DCTL_SFTDISCON);
3147 dev_dbg(hsotg->dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
3148 dwc2_readl(hsotg->regs + GRXFSIZ),
3149 dwc2_readl(hsotg->regs + GNPTXFSIZ));
3151 dwc2_hsotg_init_fifo(hsotg);
3153 /* set the PLL on, remove the HNP/SRP and set the PHY */
3154 trdtim = (hsotg->phyif == GUSBCFG_PHYIF8) ? 9 : 5;
3155 dwc2_writel(hsotg->phyif | GUSBCFG_TOUTCAL(7) |
3156 (trdtim << GUSBCFG_USBTRDTIM_SHIFT),
3157 hsotg->regs + GUSBCFG);
3159 if (using_dma(hsotg))
3160 __orr32(hsotg->regs + GAHBCFG, GAHBCFG_DMA_EN);
3164 * dwc2_hsotg_udc_start - prepare the udc for work
3165 * @gadget: The usb gadget state
3166 * @driver: The usb gadget driver
3168 * Perform initialization to prepare udc device and driver
3171 static int dwc2_hsotg_udc_start(struct usb_gadget *gadget,
3172 struct usb_gadget_driver *driver)
3174 struct dwc2_hsotg *hsotg = to_hsotg(gadget);
3175 unsigned long flags;
3179 pr_err("%s: called with no device\n", __func__);
3184 dev_err(hsotg->dev, "%s: no driver\n", __func__);
3188 if (driver->max_speed < USB_SPEED_FULL)
3189 dev_err(hsotg->dev, "%s: bad speed\n", __func__);
3191 if (!driver->setup) {
3192 dev_err(hsotg->dev, "%s: missing entry points\n", __func__);
3196 mutex_lock(&hsotg->init_mutex);
3197 WARN_ON(hsotg->driver);
3199 driver->driver.bus = NULL;
3200 hsotg->driver = driver;
3201 hsotg->gadget.dev.of_node = hsotg->dev->of_node;
3202 hsotg->gadget.speed = USB_SPEED_UNKNOWN;
3204 ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
3207 dev_err(hsotg->dev, "failed to enable supplies: %d\n", ret);
3211 dwc2_hsotg_phy_enable(hsotg);
3212 if (!IS_ERR_OR_NULL(hsotg->uphy))
3213 otg_set_peripheral(hsotg->uphy->otg, &hsotg->gadget);
3215 spin_lock_irqsave(&hsotg->lock, flags);
3216 dwc2_hsotg_init(hsotg);
3217 dwc2_hsotg_core_init_disconnected(hsotg, false);
3219 spin_unlock_irqrestore(&hsotg->lock, flags);
3221 dev_info(hsotg->dev, "bound driver %s\n", driver->driver.name);
3223 mutex_unlock(&hsotg->init_mutex);
3228 mutex_unlock(&hsotg->init_mutex);
3229 hsotg->driver = NULL;
3234 * dwc2_hsotg_udc_stop - stop the udc
3235 * @gadget: The usb gadget state
3236 * @driver: The usb gadget driver
3238 * Stop udc hw block and stay tunned for future transmissions
3240 static int dwc2_hsotg_udc_stop(struct usb_gadget *gadget)
3242 struct dwc2_hsotg *hsotg = to_hsotg(gadget);
3243 unsigned long flags = 0;
3249 mutex_lock(&hsotg->init_mutex);
3251 /* all endpoints should be shutdown */
3252 for (ep = 1; ep < hsotg->num_of_eps; ep++) {
3253 if (hsotg->eps_in[ep])
3254 dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
3255 if (hsotg->eps_out[ep])
3256 dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
3259 spin_lock_irqsave(&hsotg->lock, flags);
3261 hsotg->driver = NULL;
3262 hsotg->gadget.speed = USB_SPEED_UNKNOWN;
3265 spin_unlock_irqrestore(&hsotg->lock, flags);
3267 if (!IS_ERR_OR_NULL(hsotg->uphy))
3268 otg_set_peripheral(hsotg->uphy->otg, NULL);
3269 dwc2_hsotg_phy_disable(hsotg);
3271 regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
3273 mutex_unlock(&hsotg->init_mutex);
3279 * dwc2_hsotg_gadget_getframe - read the frame number
3280 * @gadget: The usb gadget state
3282 * Read the {micro} frame number
3284 static int dwc2_hsotg_gadget_getframe(struct usb_gadget *gadget)
3286 return dwc2_hsotg_read_frameno(to_hsotg(gadget));
3290 * dwc2_hsotg_pullup - connect/disconnect the USB PHY
3291 * @gadget: The usb gadget state
3292 * @is_on: Current state of the USB PHY
3294 * Connect/Disconnect the USB PHY pullup
3296 static int dwc2_hsotg_pullup(struct usb_gadget *gadget, int is_on)
3298 struct dwc2_hsotg *hsotg = to_hsotg(gadget);
3299 unsigned long flags = 0;
3301 dev_dbg(hsotg->dev, "%s: is_on: %d op_state: %d\n", __func__, is_on,
3304 /* Don't modify pullup state while in host mode */
3305 if (hsotg->op_state != OTG_STATE_B_PERIPHERAL) {
3306 hsotg->enabled = is_on;
3310 mutex_lock(&hsotg->init_mutex);
3311 spin_lock_irqsave(&hsotg->lock, flags);
3314 dwc2_hsotg_core_init_disconnected(hsotg, false);
3315 dwc2_hsotg_core_connect(hsotg);
3317 dwc2_hsotg_core_disconnect(hsotg);
3318 dwc2_hsotg_disconnect(hsotg);
3322 hsotg->gadget.speed = USB_SPEED_UNKNOWN;
3323 spin_unlock_irqrestore(&hsotg->lock, flags);
3324 mutex_unlock(&hsotg->init_mutex);
3329 static int dwc2_hsotg_vbus_session(struct usb_gadget *gadget, int is_active)
3331 struct dwc2_hsotg *hsotg = to_hsotg(gadget);
3332 unsigned long flags;
3334 dev_dbg(hsotg->dev, "%s: is_active: %d\n", __func__, is_active);
3335 spin_lock_irqsave(&hsotg->lock, flags);
3338 * If controller is hibernated, it must exit from hibernation
3339 * before being initialized / de-initialized
3341 if (hsotg->lx_state == DWC2_L2)
3342 dwc2_exit_hibernation(hsotg, false);
3345 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
3347 dwc2_hsotg_core_init_disconnected(hsotg, false);
3349 dwc2_hsotg_core_connect(hsotg);
3351 dwc2_hsotg_core_disconnect(hsotg);
3352 dwc2_hsotg_disconnect(hsotg);
3355 spin_unlock_irqrestore(&hsotg->lock, flags);
3360 * dwc2_hsotg_vbus_draw - report bMaxPower field
3361 * @gadget: The usb gadget state
3362 * @mA: Amount of current
3364 * Report how much power the device may consume to the phy.
3366 static int dwc2_hsotg_vbus_draw(struct usb_gadget *gadget, unsigned mA)
3368 struct dwc2_hsotg *hsotg = to_hsotg(gadget);
3370 if (IS_ERR_OR_NULL(hsotg->uphy))
3372 return usb_phy_set_power(hsotg->uphy, mA);
3375 static const struct usb_gadget_ops dwc2_hsotg_gadget_ops = {
3376 .get_frame = dwc2_hsotg_gadget_getframe,
3377 .udc_start = dwc2_hsotg_udc_start,
3378 .udc_stop = dwc2_hsotg_udc_stop,
3379 .pullup = dwc2_hsotg_pullup,
3380 .vbus_session = dwc2_hsotg_vbus_session,
3381 .vbus_draw = dwc2_hsotg_vbus_draw,
3385 * dwc2_hsotg_initep - initialise a single endpoint
3386 * @hsotg: The device state.
3387 * @hs_ep: The endpoint to be initialised.
3388 * @epnum: The endpoint number
3390 * Initialise the given endpoint (as part of the probe and device state
3391 * creation) to give to the gadget driver. Setup the endpoint name, any
3392 * direction information and other state that may be required.
3394 static void dwc2_hsotg_initep(struct dwc2_hsotg *hsotg,
3395 struct dwc2_hsotg_ep *hs_ep,
3408 hs_ep->dir_in = dir_in;
3409 hs_ep->index = epnum;
3411 snprintf(hs_ep->name, sizeof(hs_ep->name), "ep%d%s", epnum, dir);
3413 INIT_LIST_HEAD(&hs_ep->queue);
3414 INIT_LIST_HEAD(&hs_ep->ep.ep_list);
3416 /* add to the list of endpoints known by the gadget driver */
3418 list_add_tail(&hs_ep->ep.ep_list, &hsotg->gadget.ep_list);
3420 hs_ep->parent = hsotg;
3421 hs_ep->ep.name = hs_ep->name;
3422 usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT);
3423 hs_ep->ep.ops = &dwc2_hsotg_ep_ops;
3426 hs_ep->ep.caps.type_control = true;
3428 hs_ep->ep.caps.type_iso = true;
3429 hs_ep->ep.caps.type_bulk = true;
3430 hs_ep->ep.caps.type_int = true;
3434 hs_ep->ep.caps.dir_in = true;
3436 hs_ep->ep.caps.dir_out = true;
3439 * if we're using dma, we need to set the next-endpoint pointer
3440 * to be something valid.
3443 if (using_dma(hsotg)) {
3444 u32 next = DXEPCTL_NEXTEP((epnum + 1) % 15);
3446 dwc2_writel(next, hsotg->regs + DIEPCTL(epnum));
3448 dwc2_writel(next, hsotg->regs + DOEPCTL(epnum));
3453 * dwc2_hsotg_hw_cfg - read HW configuration registers
3454 * @param: The device state
3456 * Read the USB core HW configuration registers
3458 static int dwc2_hsotg_hw_cfg(struct dwc2_hsotg *hsotg)
3464 /* check hardware configuration */
3466 cfg = dwc2_readl(hsotg->regs + GHWCFG2);
3467 hsotg->num_of_eps = (cfg >> GHWCFG2_NUM_DEV_EP_SHIFT) & 0xF;
3469 hsotg->num_of_eps++;
3471 hsotg->eps_in[0] = devm_kzalloc(hsotg->dev, sizeof(struct dwc2_hsotg_ep),
3473 if (!hsotg->eps_in[0])
3475 /* Same dwc2_hsotg_ep is used in both directions for ep0 */
3476 hsotg->eps_out[0] = hsotg->eps_in[0];
3478 cfg = dwc2_readl(hsotg->regs + GHWCFG1);
3479 for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) {
3481 /* Direction in or both */
3482 if (!(ep_type & 2)) {
3483 hsotg->eps_in[i] = devm_kzalloc(hsotg->dev,
3484 sizeof(struct dwc2_hsotg_ep), GFP_KERNEL);
3485 if (!hsotg->eps_in[i])
3488 /* Direction out or both */
3489 if (!(ep_type & 1)) {
3490 hsotg->eps_out[i] = devm_kzalloc(hsotg->dev,
3491 sizeof(struct dwc2_hsotg_ep), GFP_KERNEL);
3492 if (!hsotg->eps_out[i])
3497 cfg = dwc2_readl(hsotg->regs + GHWCFG3);
3498 hsotg->fifo_mem = (cfg >> GHWCFG3_DFIFO_DEPTH_SHIFT);
3500 cfg = dwc2_readl(hsotg->regs + GHWCFG4);
3501 hsotg->dedicated_fifos = (cfg >> GHWCFG4_DED_FIFO_SHIFT) & 1;
3503 dev_info(hsotg->dev, "EPs: %d, %s fifos, %d entries in SPRAM\n",
3505 hsotg->dedicated_fifos ? "dedicated" : "shared",
3511 * dwc2_hsotg_dump - dump state of the udc
3512 * @param: The device state
3514 static void dwc2_hsotg_dump(struct dwc2_hsotg *hsotg)
3517 struct device *dev = hsotg->dev;
3518 void __iomem *regs = hsotg->regs;
3522 dev_info(dev, "DCFG=0x%08x, DCTL=0x%08x, DIEPMSK=%08x\n",
3523 dwc2_readl(regs + DCFG), dwc2_readl(regs + DCTL),
3524 dwc2_readl(regs + DIEPMSK));
3526 dev_info(dev, "GAHBCFG=0x%08x, GHWCFG1=0x%08x\n",
3527 dwc2_readl(regs + GAHBCFG), dwc2_readl(regs + GHWCFG1));
3529 dev_info(dev, "GRXFSIZ=0x%08x, GNPTXFSIZ=0x%08x\n",
3530 dwc2_readl(regs + GRXFSIZ), dwc2_readl(regs + GNPTXFSIZ));
3532 /* show periodic fifo settings */
3534 for (idx = 1; idx < hsotg->num_of_eps; idx++) {
3535 val = dwc2_readl(regs + DPTXFSIZN(idx));
3536 dev_info(dev, "DPTx[%d] FSize=%d, StAddr=0x%08x\n", idx,
3537 val >> FIFOSIZE_DEPTH_SHIFT,
3538 val & FIFOSIZE_STARTADDR_MASK);
3541 for (idx = 0; idx < hsotg->num_of_eps; idx++) {
3543 "ep%d-in: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n", idx,
3544 dwc2_readl(regs + DIEPCTL(idx)),
3545 dwc2_readl(regs + DIEPTSIZ(idx)),
3546 dwc2_readl(regs + DIEPDMA(idx)));
3548 val = dwc2_readl(regs + DOEPCTL(idx));
3550 "ep%d-out: EPCTL=0x%08x, SIZ=0x%08x, DMA=0x%08x\n",
3551 idx, dwc2_readl(regs + DOEPCTL(idx)),
3552 dwc2_readl(regs + DOEPTSIZ(idx)),
3553 dwc2_readl(regs + DOEPDMA(idx)));
3557 dev_info(dev, "DVBUSDIS=0x%08x, DVBUSPULSE=%08x\n",
3558 dwc2_readl(regs + DVBUSDIS), dwc2_readl(regs + DVBUSPULSE));
3563 static void dwc2_hsotg_of_probe(struct dwc2_hsotg *hsotg)
3565 struct device_node *np = hsotg->dev->of_node;
3569 /* Enable dma if requested in device tree */
3570 hsotg->g_using_dma = of_property_read_bool(np, "g-use-dma");
3573 * Register TX periodic fifo size per endpoint.
3574 * EP0 is excluded since it has no fifo configuration.
3576 if (!of_find_property(np, "g-tx-fifo-size", &len))
3581 /* Read tx fifo sizes other than ep0 */
3582 if (of_property_read_u32_array(np, "g-tx-fifo-size",
3583 &hsotg->g_tx_fifo_sz[1], len))
3589 /* Make remaining TX fifos unavailable */
3590 if (len < MAX_EPS_CHANNELS) {
3591 for (i = len; i < MAX_EPS_CHANNELS; i++)
3592 hsotg->g_tx_fifo_sz[i] = 0;
3596 /* Register RX fifo size */
3597 of_property_read_u32(np, "g-rx-fifo-size", &hsotg->g_rx_fifo_sz);
3599 /* Register NPTX fifo size */
3600 of_property_read_u32(np, "g-np-tx-fifo-size",
3601 &hsotg->g_np_g_tx_fifo_sz);
3604 static inline void dwc2_hsotg_of_probe(struct dwc2_hsotg *hsotg) { }
3608 * dwc2_gadget_init - init function for gadget
3609 * @dwc2: The data structure for the DWC2 driver.
3610 * @irq: The IRQ number for the controller.
3612 int dwc2_gadget_init(struct dwc2_hsotg *hsotg, int irq)
3614 struct device *dev = hsotg->dev;
3615 struct dwc2_hsotg_plat *plat = dev->platform_data;
3619 u32 p_tx_fifo[] = DWC2_G_P_LEGACY_TX_FIFO_SIZE;
3621 /* Set default UTMI width */
3622 hsotg->phyif = GUSBCFG_PHYIF16;
3624 /* Initialize to legacy fifo configuration values */
3625 hsotg->g_rx_fifo_sz = 2048;
3626 hsotg->g_np_g_tx_fifo_sz = 1024;
3627 memcpy(&hsotg->g_tx_fifo_sz[1], p_tx_fifo, sizeof(p_tx_fifo));
3628 /* Device tree specific probe */
3629 dwc2_hsotg_of_probe(hsotg);
3630 /* Dump fifo information */
3631 dev_dbg(dev, "NonPeriodic TXFIFO size: %d\n",
3632 hsotg->g_np_g_tx_fifo_sz);
3633 dev_dbg(dev, "RXFIFO size: %d\n", hsotg->g_rx_fifo_sz);
3634 for (i = 0; i < MAX_EPS_CHANNELS; i++)
3635 dev_dbg(dev, "Periodic TXFIFO%2d size: %d\n", i,
3636 hsotg->g_tx_fifo_sz[i]);
3638 * If platform probe couldn't find a generic PHY or an old style
3639 * USB PHY, fall back to pdata
3641 if (IS_ERR_OR_NULL(hsotg->phy) && IS_ERR_OR_NULL(hsotg->uphy)) {
3642 plat = dev_get_platdata(dev);
3645 "no platform data or transceiver defined\n");
3646 return -EPROBE_DEFER;
3649 } else if (hsotg->phy) {
3651 * If using the generic PHY framework, check if the PHY bus
3652 * width is 8-bit and set the phyif appropriately.
3654 if (phy_get_bus_width(hsotg->phy) == 8)
3655 hsotg->phyif = GUSBCFG_PHYIF8;
3658 hsotg->clk = devm_clk_get(dev, "otg");
3659 if (IS_ERR(hsotg->clk)) {
3661 dev_dbg(dev, "cannot get otg clock\n");
3664 hsotg->gadget.max_speed = USB_SPEED_HIGH;
3665 hsotg->gadget.ops = &dwc2_hsotg_gadget_ops;
3666 hsotg->gadget.name = dev_name(dev);
3667 if (hsotg->dr_mode == USB_DR_MODE_OTG)
3668 hsotg->gadget.is_otg = 1;
3669 else if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
3670 hsotg->op_state = OTG_STATE_B_PERIPHERAL;
3672 /* reset the system */
3674 ret = clk_prepare_enable(hsotg->clk);
3676 dev_err(dev, "failed to enable otg clk\n");
3683 for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
3684 hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
3686 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(hsotg->supplies),
3689 dev_err(dev, "failed to request supplies: %d\n", ret);
3693 ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
3697 dev_err(dev, "failed to enable supplies: %d\n", ret);
3701 /* usb phy enable */
3702 dwc2_hsotg_phy_enable(hsotg);
3705 * Force Device mode before initialization.
3706 * This allows correctly configuring fifo for device mode.
3708 __bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEHOSTMODE);
3709 __orr32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE);
3712 * According to Synopsys databook, this sleep is needed for the force
3713 * device mode to take effect.
3717 dwc2_hsotg_corereset(hsotg);
3718 ret = dwc2_hsotg_hw_cfg(hsotg);
3720 dev_err(hsotg->dev, "Hardware configuration failed: %d\n", ret);
3724 dwc2_hsotg_init(hsotg);
3726 /* Switch back to default configuration */
3727 __bic32(hsotg->regs + GUSBCFG, GUSBCFG_FORCEDEVMODE);
3729 hsotg->ctrl_buff = devm_kzalloc(hsotg->dev,
3730 DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
3731 if (!hsotg->ctrl_buff) {
3732 dev_err(dev, "failed to allocate ctrl request buff\n");
3737 hsotg->ep0_buff = devm_kzalloc(hsotg->dev,
3738 DWC2_CTRL_BUFF_SIZE, GFP_KERNEL);
3739 if (!hsotg->ep0_buff) {
3740 dev_err(dev, "failed to allocate ctrl reply buff\n");
3745 ret = devm_request_irq(hsotg->dev, irq, dwc2_hsotg_irq, IRQF_SHARED,
3746 dev_name(hsotg->dev), hsotg);
3748 dwc2_hsotg_phy_disable(hsotg);
3749 clk_disable_unprepare(hsotg->clk);
3750 regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
3752 dev_err(dev, "cannot claim IRQ for gadget\n");
3756 /* hsotg->num_of_eps holds number of EPs other than ep0 */
3758 if (hsotg->num_of_eps == 0) {
3759 dev_err(dev, "wrong number of EPs (zero)\n");
3764 /* setup endpoint information */
3766 INIT_LIST_HEAD(&hsotg->gadget.ep_list);
3767 hsotg->gadget.ep0 = &hsotg->eps_out[0]->ep;
3769 /* allocate EP0 request */
3771 hsotg->ctrl_req = dwc2_hsotg_ep_alloc_request(&hsotg->eps_out[0]->ep,
3773 if (!hsotg->ctrl_req) {
3774 dev_err(dev, "failed to allocate ctrl req\n");
3779 /* initialise the endpoints now the core has been initialised */
3780 for (epnum = 0; epnum < hsotg->num_of_eps; epnum++) {
3781 if (hsotg->eps_in[epnum])
3782 dwc2_hsotg_initep(hsotg, hsotg->eps_in[epnum],
3784 if (hsotg->eps_out[epnum])
3785 dwc2_hsotg_initep(hsotg, hsotg->eps_out[epnum],
3789 /* disable power and clock */
3790 dwc2_hsotg_phy_disable(hsotg);
3792 ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
3795 dev_err(dev, "failed to disable supplies: %d\n", ret);
3799 ret = usb_add_gadget_udc(dev, &hsotg->gadget);
3803 dwc2_hsotg_dump(hsotg);
3808 dwc2_hsotg_phy_disable(hsotg);
3810 clk_disable_unprepare(hsotg->clk);
3816 * dwc2_hsotg_remove - remove function for hsotg driver
3817 * @pdev: The platform information for the driver
3819 int dwc2_hsotg_remove(struct dwc2_hsotg *hsotg)
3821 usb_del_gadget_udc(&hsotg->gadget);
3822 clk_disable_unprepare(hsotg->clk);
3827 int dwc2_hsotg_suspend(struct dwc2_hsotg *hsotg)
3829 unsigned long flags;
3832 if (hsotg->lx_state != DWC2_L0)
3835 mutex_lock(&hsotg->init_mutex);
3837 if (hsotg->driver) {
3840 dev_info(hsotg->dev, "suspending usb gadget %s\n",
3841 hsotg->driver->driver.name);
3843 spin_lock_irqsave(&hsotg->lock, flags);
3845 dwc2_hsotg_core_disconnect(hsotg);
3846 dwc2_hsotg_disconnect(hsotg);
3847 hsotg->gadget.speed = USB_SPEED_UNKNOWN;
3848 spin_unlock_irqrestore(&hsotg->lock, flags);
3850 dwc2_hsotg_phy_disable(hsotg);
3852 for (ep = 0; ep < hsotg->num_of_eps; ep++) {
3853 if (hsotg->eps_in[ep])
3854 dwc2_hsotg_ep_disable(&hsotg->eps_in[ep]->ep);
3855 if (hsotg->eps_out[ep])
3856 dwc2_hsotg_ep_disable(&hsotg->eps_out[ep]->ep);
3859 ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
3861 clk_disable(hsotg->clk);
3864 mutex_unlock(&hsotg->init_mutex);
3869 int dwc2_hsotg_resume(struct dwc2_hsotg *hsotg)
3871 unsigned long flags;
3874 if (hsotg->lx_state == DWC2_L2)
3877 mutex_lock(&hsotg->init_mutex);
3879 if (hsotg->driver) {
3880 dev_info(hsotg->dev, "resuming usb gadget %s\n",
3881 hsotg->driver->driver.name);
3883 clk_enable(hsotg->clk);
3884 ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
3887 dwc2_hsotg_phy_enable(hsotg);
3889 spin_lock_irqsave(&hsotg->lock, flags);
3890 dwc2_hsotg_core_init_disconnected(hsotg, false);
3892 dwc2_hsotg_core_connect(hsotg);
3893 spin_unlock_irqrestore(&hsotg->lock, flags);
3895 mutex_unlock(&hsotg->init_mutex);