2 * printer.c -- Printer gadget driver
4 * Copyright (C) 2003-2005 David Brownell
5 * Copyright (C) 2006 Craig W. Nadler
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License as published by
9 * the Free Software Foundation; either version 2 of the License, or
10 * (at your option) any later version.
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/delay.h>
16 #include <linux/ioport.h>
17 #include <linux/sched.h>
18 #include <linux/slab.h>
19 #include <linux/mutex.h>
20 #include <linux/errno.h>
21 #include <linux/init.h>
22 #include <linux/timer.h>
23 #include <linux/list.h>
24 #include <linux/interrupt.h>
25 #include <linux/device.h>
26 #include <linux/moduleparam.h>
28 #include <linux/poll.h>
29 #include <linux/types.h>
30 #include <linux/ctype.h>
31 #include <linux/cdev.h>
33 #include <asm/byteorder.h>
35 #include <linux/irq.h>
36 #include <linux/uaccess.h>
37 #include <asm/unaligned.h>
39 #include <linux/usb/ch9.h>
40 #include <linux/usb/composite.h>
41 #include <linux/usb/gadget.h>
42 #include <linux/usb/g_printer.h>
44 #include "gadget_chips.h"
46 USB_GADGET_COMPOSITE_OPTIONS();
48 #define DRIVER_DESC "Printer Gadget"
49 #define DRIVER_VERSION "2007 OCT 06"
51 static DEFINE_MUTEX(printer_mutex);
52 static const char shortname [] = "printer";
53 static const char driver_desc [] = DRIVER_DESC;
55 static dev_t g_printer_devno;
57 static struct class *usb_gadget_class;
59 /*-------------------------------------------------------------------------*/
62 spinlock_t lock; /* lock this structure */
63 /* lock buffer lists during read/write calls */
64 struct mutex lock_printer_io;
65 struct usb_gadget *gadget;
67 struct usb_ep *in_ep, *out_ep;
69 struct list_head rx_reqs; /* List of free RX structs */
70 struct list_head rx_reqs_active; /* List of Active RX xfers */
71 struct list_head rx_buffers; /* List of completed xfers */
72 /* wait until there is data to be read. */
73 wait_queue_head_t rx_wait;
74 struct list_head tx_reqs; /* List of free TX structs */
75 struct list_head tx_reqs_active; /* List of Active TX xfers */
76 /* Wait until there are write buffers available to use. */
77 wait_queue_head_t tx_wait;
78 /* Wait until all write buffers have been sent. */
79 wait_queue_head_t tx_flush_wait;
80 struct usb_request *current_rx_req;
81 size_t current_rx_bytes;
85 struct cdev printer_cdev;
88 wait_queue_head_t wait;
89 struct usb_function function;
92 static struct printer_dev usb_printer_gadget;
94 /*-------------------------------------------------------------------------*/
96 /* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
97 * Instead: allocate your own, using normal USB-IF procedures.
100 /* Thanks to NetChip Technologies for donating this product ID.
102 #define PRINTER_VENDOR_NUM 0x0525 /* NetChip */
103 #define PRINTER_PRODUCT_NUM 0xa4a8 /* Linux-USB Printer Gadget */
105 /* Some systems will want different product identifiers published in the
106 * device descriptor, either numbers or strings or both. These string
107 * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
110 module_param_named(iSerialNum, coverwrite.serial_number, charp, S_IRUGO);
111 MODULE_PARM_DESC(iSerialNum, "1");
113 static char *iPNPstring;
114 module_param(iPNPstring, charp, S_IRUGO);
115 MODULE_PARM_DESC(iPNPstring, "MFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;");
117 /* Number of requests to allocate per endpoint, not used for ep0. */
118 static unsigned qlen = 10;
119 module_param(qlen, uint, S_IRUGO|S_IWUSR);
123 /*-------------------------------------------------------------------------*/
126 * DESCRIPTORS ... most are static, but strings and (full) configuration
127 * descriptors are built on demand.
130 /* holds our biggest descriptor */
131 #define USB_DESC_BUFSIZE 256
132 #define USB_BUFSIZE 8192
134 static struct usb_device_descriptor device_desc = {
135 .bLength = sizeof device_desc,
136 .bDescriptorType = USB_DT_DEVICE,
137 .bcdUSB = cpu_to_le16(0x0200),
138 .bDeviceClass = USB_CLASS_PER_INTERFACE,
139 .bDeviceSubClass = 0,
140 .bDeviceProtocol = 0,
141 .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM),
142 .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM),
143 .bNumConfigurations = 1
146 static struct usb_interface_descriptor intf_desc = {
147 .bLength = sizeof intf_desc,
148 .bDescriptorType = USB_DT_INTERFACE,
150 .bInterfaceClass = USB_CLASS_PRINTER,
151 .bInterfaceSubClass = 1, /* Printer Sub-Class */
152 .bInterfaceProtocol = 2, /* Bi-Directional */
156 static struct usb_endpoint_descriptor fs_ep_in_desc = {
157 .bLength = USB_DT_ENDPOINT_SIZE,
158 .bDescriptorType = USB_DT_ENDPOINT,
159 .bEndpointAddress = USB_DIR_IN,
160 .bmAttributes = USB_ENDPOINT_XFER_BULK
163 static struct usb_endpoint_descriptor fs_ep_out_desc = {
164 .bLength = USB_DT_ENDPOINT_SIZE,
165 .bDescriptorType = USB_DT_ENDPOINT,
166 .bEndpointAddress = USB_DIR_OUT,
167 .bmAttributes = USB_ENDPOINT_XFER_BULK
170 static struct usb_descriptor_header *fs_printer_function[] = {
171 (struct usb_descriptor_header *) &intf_desc,
172 (struct usb_descriptor_header *) &fs_ep_in_desc,
173 (struct usb_descriptor_header *) &fs_ep_out_desc,
178 * usb 2.0 devices need to expose both high speed and full speed
179 * descriptors, unless they only run at full speed.
182 static struct usb_endpoint_descriptor hs_ep_in_desc = {
183 .bLength = USB_DT_ENDPOINT_SIZE,
184 .bDescriptorType = USB_DT_ENDPOINT,
185 .bmAttributes = USB_ENDPOINT_XFER_BULK,
186 .wMaxPacketSize = cpu_to_le16(512)
189 static struct usb_endpoint_descriptor hs_ep_out_desc = {
190 .bLength = USB_DT_ENDPOINT_SIZE,
191 .bDescriptorType = USB_DT_ENDPOINT,
192 .bmAttributes = USB_ENDPOINT_XFER_BULK,
193 .wMaxPacketSize = cpu_to_le16(512)
196 static struct usb_qualifier_descriptor dev_qualifier = {
197 .bLength = sizeof dev_qualifier,
198 .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
199 .bcdUSB = cpu_to_le16(0x0200),
200 .bDeviceClass = USB_CLASS_PRINTER,
201 .bNumConfigurations = 1
204 static struct usb_descriptor_header *hs_printer_function[] = {
205 (struct usb_descriptor_header *) &intf_desc,
206 (struct usb_descriptor_header *) &hs_ep_in_desc,
207 (struct usb_descriptor_header *) &hs_ep_out_desc,
211 static struct usb_otg_descriptor otg_descriptor = {
212 .bLength = sizeof otg_descriptor,
213 .bDescriptorType = USB_DT_OTG,
214 .bmAttributes = USB_OTG_SRP,
217 static const struct usb_descriptor_header *otg_desc[] = {
218 (struct usb_descriptor_header *) &otg_descriptor,
222 /* maxpacket and other transfer characteristics vary by speed. */
223 #define ep_desc(g, hs, fs) (((g)->speed == USB_SPEED_HIGH)?(hs):(fs))
225 /*-------------------------------------------------------------------------*/
227 /* descriptors that are built on-demand */
229 static char product_desc [40] = DRIVER_DESC;
230 static char serial_num [40] = "1";
231 static char pnp_string [1024] =
232 "XXMFG:linux;MDL:g_printer;CLS:PRINTER;SN:1;";
234 /* static strings, in UTF-8 */
235 static struct usb_string strings [] = {
236 [USB_GADGET_MANUFACTURER_IDX].s = "",
237 [USB_GADGET_PRODUCT_IDX].s = product_desc,
238 [USB_GADGET_SERIAL_IDX].s = serial_num,
239 { } /* end of list */
242 static struct usb_gadget_strings stringtab_dev = {
243 .language = 0x0409, /* en-us */
247 static struct usb_gadget_strings *dev_strings[] = {
252 /*-------------------------------------------------------------------------*/
254 static struct usb_request *
255 printer_req_alloc(struct usb_ep *ep, unsigned len, gfp_t gfp_flags)
257 struct usb_request *req;
259 req = usb_ep_alloc_request(ep, gfp_flags);
263 req->buf = kmalloc(len, gfp_flags);
264 if (req->buf == NULL) {
265 usb_ep_free_request(ep, req);
274 printer_req_free(struct usb_ep *ep, struct usb_request *req)
276 if (ep != NULL && req != NULL) {
278 usb_ep_free_request(ep, req);
282 /*-------------------------------------------------------------------------*/
284 static void rx_complete(struct usb_ep *ep, struct usb_request *req)
286 struct printer_dev *dev = ep->driver_data;
287 int status = req->status;
290 spin_lock_irqsave(&dev->lock, flags);
292 list_del_init(&req->list); /* Remode from Active List */
296 /* normal completion */
298 if (req->actual > 0) {
299 list_add_tail(&req->list, &dev->rx_buffers);
300 DBG(dev, "G_Printer : rx length %d\n", req->actual);
302 list_add(&req->list, &dev->rx_reqs);
306 /* software-driven interface shutdown */
307 case -ECONNRESET: /* unlink */
308 case -ESHUTDOWN: /* disconnect etc */
309 VDBG(dev, "rx shutdown, code %d\n", status);
310 list_add(&req->list, &dev->rx_reqs);
313 /* for hardware automagic (such as pxa) */
314 case -ECONNABORTED: /* endpoint reset */
315 DBG(dev, "rx %s reset\n", ep->name);
316 list_add(&req->list, &dev->rx_reqs);
324 DBG(dev, "rx status %d\n", status);
325 list_add(&req->list, &dev->rx_reqs);
329 wake_up_interruptible(&dev->rx_wait);
330 spin_unlock_irqrestore(&dev->lock, flags);
333 static void tx_complete(struct usb_ep *ep, struct usb_request *req)
335 struct printer_dev *dev = ep->driver_data;
337 switch (req->status) {
339 VDBG(dev, "tx err %d\n", req->status);
341 case -ECONNRESET: /* unlink */
342 case -ESHUTDOWN: /* disconnect etc */
348 spin_lock(&dev->lock);
349 /* Take the request struct off the active list and put it on the
352 list_del_init(&req->list);
353 list_add(&req->list, &dev->tx_reqs);
354 wake_up_interruptible(&dev->tx_wait);
355 if (likely(list_empty(&dev->tx_reqs_active)))
356 wake_up_interruptible(&dev->tx_flush_wait);
358 spin_unlock(&dev->lock);
361 /*-------------------------------------------------------------------------*/
364 printer_open(struct inode *inode, struct file *fd)
366 struct printer_dev *dev;
370 mutex_lock(&printer_mutex);
371 dev = container_of(inode->i_cdev, struct printer_dev, printer_cdev);
373 spin_lock_irqsave(&dev->lock, flags);
375 if (!dev->printer_cdev_open) {
376 dev->printer_cdev_open = 1;
377 fd->private_data = dev;
379 /* Change the printer status to show that it's on-line. */
380 dev->printer_status |= PRINTER_SELECTED;
383 spin_unlock_irqrestore(&dev->lock, flags);
385 DBG(dev, "printer_open returned %x\n", ret);
386 mutex_unlock(&printer_mutex);
391 printer_close(struct inode *inode, struct file *fd)
393 struct printer_dev *dev = fd->private_data;
396 spin_lock_irqsave(&dev->lock, flags);
397 dev->printer_cdev_open = 0;
398 fd->private_data = NULL;
399 /* Change printer status to show that the printer is off-line. */
400 dev->printer_status &= ~PRINTER_SELECTED;
401 spin_unlock_irqrestore(&dev->lock, flags);
403 DBG(dev, "printer_close\n");
408 /* This function must be called with interrupts turned off. */
410 setup_rx_reqs(struct printer_dev *dev)
412 struct usb_request *req;
414 while (likely(!list_empty(&dev->rx_reqs))) {
417 req = container_of(dev->rx_reqs.next,
418 struct usb_request, list);
419 list_del_init(&req->list);
421 /* The USB Host sends us whatever amount of data it wants to
422 * so we always set the length field to the full USB_BUFSIZE.
423 * If the amount of data is more than the read() caller asked
424 * for it will be stored in the request buffer until it is
425 * asked for by read().
427 req->length = USB_BUFSIZE;
428 req->complete = rx_complete;
430 /* here, we unlock, and only unlock, to avoid deadlock. */
431 spin_unlock(&dev->lock);
432 error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC);
433 spin_lock(&dev->lock);
435 DBG(dev, "rx submit --> %d\n", error);
436 list_add(&req->list, &dev->rx_reqs);
439 /* if the req is empty, then add it into dev->rx_reqs_active. */
440 else if (list_empty(&req->list)) {
441 list_add(&req->list, &dev->rx_reqs_active);
447 printer_read(struct file *fd, char __user *buf, size_t len, loff_t *ptr)
449 struct printer_dev *dev = fd->private_data;
453 struct usb_request *req;
454 /* This is a pointer to the current USB rx request. */
455 struct usb_request *current_rx_req;
456 /* This is the number of bytes in the current rx buffer. */
457 size_t current_rx_bytes;
458 /* This is a pointer to the current rx buffer. */
464 DBG(dev, "printer_read trying to read %d bytes\n", (int)len);
466 mutex_lock(&dev->lock_printer_io);
467 spin_lock_irqsave(&dev->lock, flags);
469 /* We will use this flag later to check if a printer reset happened
470 * after we turn interrupts back on.
472 dev->reset_printer = 0;
477 current_rx_req = dev->current_rx_req;
478 current_rx_bytes = dev->current_rx_bytes;
479 current_rx_buf = dev->current_rx_buf;
480 dev->current_rx_req = NULL;
481 dev->current_rx_bytes = 0;
482 dev->current_rx_buf = NULL;
484 /* Check if there is any data in the read buffers. Please note that
485 * current_rx_bytes is the number of bytes in the current rx buffer.
486 * If it is zero then check if there are any other rx_buffers that
487 * are on the completed list. We are only out of data if all rx
490 if ((current_rx_bytes == 0) &&
491 (likely(list_empty(&dev->rx_buffers)))) {
492 /* Turn interrupts back on before sleeping. */
493 spin_unlock_irqrestore(&dev->lock, flags);
496 * If no data is available check if this is a NON-Blocking
499 if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
500 mutex_unlock(&dev->lock_printer_io);
504 /* Sleep until data is available */
505 wait_event_interruptible(dev->rx_wait,
506 (likely(!list_empty(&dev->rx_buffers))));
507 spin_lock_irqsave(&dev->lock, flags);
510 /* We have data to return then copy it to the caller's buffer.*/
511 while ((current_rx_bytes || likely(!list_empty(&dev->rx_buffers)))
513 if (current_rx_bytes == 0) {
514 req = container_of(dev->rx_buffers.next,
515 struct usb_request, list);
516 list_del_init(&req->list);
518 if (req->actual && req->buf) {
519 current_rx_req = req;
520 current_rx_bytes = req->actual;
521 current_rx_buf = req->buf;
523 list_add(&req->list, &dev->rx_reqs);
528 /* Don't leave irqs off while doing memory copies */
529 spin_unlock_irqrestore(&dev->lock, flags);
531 if (len > current_rx_bytes)
532 size = current_rx_bytes;
536 size -= copy_to_user(buf, current_rx_buf, size);
537 bytes_copied += size;
541 spin_lock_irqsave(&dev->lock, flags);
543 /* We've disconnected or reset so return. */
544 if (dev->reset_printer) {
545 list_add(¤t_rx_req->list, &dev->rx_reqs);
546 spin_unlock_irqrestore(&dev->lock, flags);
547 mutex_unlock(&dev->lock_printer_io);
551 /* If we not returning all the data left in this RX request
552 * buffer then adjust the amount of data left in the buffer.
553 * Othewise if we are done with this RX request buffer then
554 * requeue it to get any incoming data from the USB host.
556 if (size < current_rx_bytes) {
557 current_rx_bytes -= size;
558 current_rx_buf += size;
560 list_add(¤t_rx_req->list, &dev->rx_reqs);
561 current_rx_bytes = 0;
562 current_rx_buf = NULL;
563 current_rx_req = NULL;
567 dev->current_rx_req = current_rx_req;
568 dev->current_rx_bytes = current_rx_bytes;
569 dev->current_rx_buf = current_rx_buf;
571 spin_unlock_irqrestore(&dev->lock, flags);
572 mutex_unlock(&dev->lock_printer_io);
574 DBG(dev, "printer_read returned %d bytes\n", (int)bytes_copied);
583 printer_write(struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
585 struct printer_dev *dev = fd->private_data;
587 size_t size; /* Amount of data in a TX request. */
588 size_t bytes_copied = 0;
589 struct usb_request *req;
591 DBG(dev, "printer_write trying to send %d bytes\n", (int)len);
596 mutex_lock(&dev->lock_printer_io);
597 spin_lock_irqsave(&dev->lock, flags);
599 /* Check if a printer reset happens while we have interrupts on */
600 dev->reset_printer = 0;
602 /* Check if there is any available write buffers */
603 if (likely(list_empty(&dev->tx_reqs))) {
604 /* Turn interrupts back on before sleeping. */
605 spin_unlock_irqrestore(&dev->lock, flags);
608 * If write buffers are available check if this is
609 * a NON-Blocking call or not.
611 if (fd->f_flags & (O_NONBLOCK|O_NDELAY)) {
612 mutex_unlock(&dev->lock_printer_io);
616 /* Sleep until a write buffer is available */
617 wait_event_interruptible(dev->tx_wait,
618 (likely(!list_empty(&dev->tx_reqs))));
619 spin_lock_irqsave(&dev->lock, flags);
622 while (likely(!list_empty(&dev->tx_reqs)) && len) {
624 if (len > USB_BUFSIZE)
629 req = container_of(dev->tx_reqs.next, struct usb_request,
631 list_del_init(&req->list);
633 req->complete = tx_complete;
636 /* Check if we need to send a zero length packet. */
638 /* They will be more TX requests so no yet. */
641 /* If the data amount is not a multple of the
642 * maxpacket size then send a zero length packet.
644 req->zero = ((len % dev->in_ep->maxpacket) == 0);
646 /* Don't leave irqs off while doing memory copies */
647 spin_unlock_irqrestore(&dev->lock, flags);
649 if (copy_from_user(req->buf, buf, size)) {
650 list_add(&req->list, &dev->tx_reqs);
651 mutex_unlock(&dev->lock_printer_io);
655 bytes_copied += size;
659 spin_lock_irqsave(&dev->lock, flags);
661 /* We've disconnected or reset so free the req and buffer */
662 if (dev->reset_printer) {
663 list_add(&req->list, &dev->tx_reqs);
664 spin_unlock_irqrestore(&dev->lock, flags);
665 mutex_unlock(&dev->lock_printer_io);
669 if (usb_ep_queue(dev->in_ep, req, GFP_ATOMIC)) {
670 list_add(&req->list, &dev->tx_reqs);
671 spin_unlock_irqrestore(&dev->lock, flags);
672 mutex_unlock(&dev->lock_printer_io);
676 list_add(&req->list, &dev->tx_reqs_active);
680 spin_unlock_irqrestore(&dev->lock, flags);
681 mutex_unlock(&dev->lock_printer_io);
683 DBG(dev, "printer_write sent %d bytes\n", (int)bytes_copied);
693 printer_fsync(struct file *fd, loff_t start, loff_t end, int datasync)
695 struct printer_dev *dev = fd->private_data;
696 struct inode *inode = file_inode(fd);
700 mutex_lock(&inode->i_mutex);
701 spin_lock_irqsave(&dev->lock, flags);
702 tx_list_empty = (likely(list_empty(&dev->tx_reqs)));
703 spin_unlock_irqrestore(&dev->lock, flags);
705 if (!tx_list_empty) {
706 /* Sleep until all data has been sent */
707 wait_event_interruptible(dev->tx_flush_wait,
708 (likely(list_empty(&dev->tx_reqs_active))));
710 mutex_unlock(&inode->i_mutex);
716 printer_poll(struct file *fd, poll_table *wait)
718 struct printer_dev *dev = fd->private_data;
722 mutex_lock(&dev->lock_printer_io);
723 spin_lock_irqsave(&dev->lock, flags);
725 spin_unlock_irqrestore(&dev->lock, flags);
726 mutex_unlock(&dev->lock_printer_io);
728 poll_wait(fd, &dev->rx_wait, wait);
729 poll_wait(fd, &dev->tx_wait, wait);
731 spin_lock_irqsave(&dev->lock, flags);
732 if (likely(!list_empty(&dev->tx_reqs)))
733 status |= POLLOUT | POLLWRNORM;
735 if (likely(dev->current_rx_bytes) ||
736 likely(!list_empty(&dev->rx_buffers)))
737 status |= POLLIN | POLLRDNORM;
739 spin_unlock_irqrestore(&dev->lock, flags);
745 printer_ioctl(struct file *fd, unsigned int code, unsigned long arg)
747 struct printer_dev *dev = fd->private_data;
751 DBG(dev, "printer_ioctl: cmd=0x%4.4x, arg=%lu\n", code, arg);
755 spin_lock_irqsave(&dev->lock, flags);
758 case GADGET_GET_PRINTER_STATUS:
759 status = (int)dev->printer_status;
761 case GADGET_SET_PRINTER_STATUS:
762 dev->printer_status = (u8)arg;
765 /* could not handle ioctl */
766 DBG(dev, "printer_ioctl: ERROR cmd=0x%4.4xis not supported\n",
771 spin_unlock_irqrestore(&dev->lock, flags);
776 /* used after endpoint configuration */
777 static const struct file_operations printer_io_operations = {
778 .owner = THIS_MODULE,
779 .open = printer_open,
780 .read = printer_read,
781 .write = printer_write,
782 .fsync = printer_fsync,
783 .poll = printer_poll,
784 .unlocked_ioctl = printer_ioctl,
785 .release = printer_close,
786 .llseek = noop_llseek,
789 /*-------------------------------------------------------------------------*/
792 set_printer_interface(struct printer_dev *dev)
796 dev->in_ep->desc = ep_desc(dev->gadget, &hs_ep_in_desc, &fs_ep_in_desc);
797 dev->in_ep->driver_data = dev;
799 dev->out_ep->desc = ep_desc(dev->gadget, &hs_ep_out_desc,
801 dev->out_ep->driver_data = dev;
803 result = usb_ep_enable(dev->in_ep);
805 DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
809 result = usb_ep_enable(dev->out_ep);
811 DBG(dev, "enable %s --> %d\n", dev->in_ep->name, result);
816 /* on error, disable any endpoints */
818 (void) usb_ep_disable(dev->in_ep);
819 (void) usb_ep_disable(dev->out_ep);
820 dev->in_ep->desc = NULL;
821 dev->out_ep->desc = NULL;
824 /* caller is responsible for cleanup on error */
828 static void printer_reset_interface(struct printer_dev *dev)
830 if (dev->interface < 0)
833 DBG(dev, "%s\n", __func__);
835 if (dev->in_ep->desc)
836 usb_ep_disable(dev->in_ep);
838 if (dev->out_ep->desc)
839 usb_ep_disable(dev->out_ep);
841 dev->in_ep->desc = NULL;
842 dev->out_ep->desc = NULL;
846 /* Change our operational Interface. */
847 static int set_interface(struct printer_dev *dev, unsigned number)
851 /* Free the current interface */
852 printer_reset_interface(dev);
854 result = set_printer_interface(dev);
856 printer_reset_interface(dev);
858 dev->interface = number;
861 INFO(dev, "Using interface %x\n", number);
866 static void printer_soft_reset(struct printer_dev *dev)
868 struct usb_request *req;
870 INFO(dev, "Received Printer Reset Request\n");
872 if (usb_ep_disable(dev->in_ep))
873 DBG(dev, "Failed to disable USB in_ep\n");
874 if (usb_ep_disable(dev->out_ep))
875 DBG(dev, "Failed to disable USB out_ep\n");
877 if (dev->current_rx_req != NULL) {
878 list_add(&dev->current_rx_req->list, &dev->rx_reqs);
879 dev->current_rx_req = NULL;
881 dev->current_rx_bytes = 0;
882 dev->current_rx_buf = NULL;
883 dev->reset_printer = 1;
885 while (likely(!(list_empty(&dev->rx_buffers)))) {
886 req = container_of(dev->rx_buffers.next, struct usb_request,
888 list_del_init(&req->list);
889 list_add(&req->list, &dev->rx_reqs);
892 while (likely(!(list_empty(&dev->rx_reqs_active)))) {
893 req = container_of(dev->rx_buffers.next, struct usb_request,
895 list_del_init(&req->list);
896 list_add(&req->list, &dev->rx_reqs);
899 while (likely(!(list_empty(&dev->tx_reqs_active)))) {
900 req = container_of(dev->tx_reqs_active.next,
901 struct usb_request, list);
902 list_del_init(&req->list);
903 list_add(&req->list, &dev->tx_reqs);
906 if (usb_ep_enable(dev->in_ep))
907 DBG(dev, "Failed to enable USB in_ep\n");
908 if (usb_ep_enable(dev->out_ep))
909 DBG(dev, "Failed to enable USB out_ep\n");
911 wake_up_interruptible(&dev->rx_wait);
912 wake_up_interruptible(&dev->tx_wait);
913 wake_up_interruptible(&dev->tx_flush_wait);
916 /*-------------------------------------------------------------------------*/
919 * The setup() callback implements all the ep0 functionality that's not
920 * handled lower down.
922 static int printer_func_setup(struct usb_function *f,
923 const struct usb_ctrlrequest *ctrl)
925 struct printer_dev *dev = container_of(f, struct printer_dev, function);
926 struct usb_composite_dev *cdev = f->config->cdev;
927 struct usb_request *req = cdev->req;
928 int value = -EOPNOTSUPP;
929 u16 wIndex = le16_to_cpu(ctrl->wIndex);
930 u16 wValue = le16_to_cpu(ctrl->wValue);
931 u16 wLength = le16_to_cpu(ctrl->wLength);
933 DBG(dev, "ctrl req%02x.%02x v%04x i%04x l%d\n",
934 ctrl->bRequestType, ctrl->bRequest, wValue, wIndex, wLength);
936 switch (ctrl->bRequestType&USB_TYPE_MASK) {
938 switch (ctrl->bRequest) {
939 case 0: /* Get the IEEE-1284 PNP String */
940 /* Only one printer interface is supported. */
941 if ((wIndex>>8) != dev->interface)
944 value = (pnp_string[0]<<8)|pnp_string[1];
945 memcpy(req->buf, pnp_string, value);
946 DBG(dev, "1284 PNP String: %x %s\n", value,
950 case 1: /* Get Port Status */
951 /* Only one printer interface is supported. */
952 if (wIndex != dev->interface)
955 *(u8 *)req->buf = dev->printer_status;
956 value = min(wLength, (u16) 1);
959 case 2: /* Soft Reset */
960 /* Only one printer interface is supported. */
961 if (wIndex != dev->interface)
964 printer_soft_reset(dev);
977 "unknown ctrl req%02x.%02x v%04x i%04x l%d\n",
978 ctrl->bRequestType, ctrl->bRequest,
979 wValue, wIndex, wLength);
982 /* host either stalls (value < 0) or reports success */
986 static int __init printer_func_bind(struct usb_configuration *c,
987 struct usb_function *f)
989 struct printer_dev *dev = container_of(f, struct printer_dev, function);
990 struct usb_composite_dev *cdev = c->cdev;
991 struct usb_ep *in_ep;
992 struct usb_ep *out_ep = NULL;
996 id = usb_interface_id(c, f);
999 intf_desc.bInterfaceNumber = id;
1001 /* all we really need is bulk IN/OUT */
1002 in_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_in_desc);
1005 dev_err(&cdev->gadget->dev, "can't autoconfigure on %s\n",
1006 cdev->gadget->name);
1009 in_ep->driver_data = in_ep; /* claim */
1011 out_ep = usb_ep_autoconfig(cdev->gadget, &fs_ep_out_desc);
1014 out_ep->driver_data = out_ep; /* claim */
1016 /* assumes that all endpoints are dual-speed */
1017 hs_ep_in_desc.bEndpointAddress = fs_ep_in_desc.bEndpointAddress;
1018 hs_ep_out_desc.bEndpointAddress = fs_ep_out_desc.bEndpointAddress;
1020 ret = usb_assign_descriptors(f, fs_printer_function,
1021 hs_printer_function, NULL);
1026 dev->out_ep = out_ep;
1030 static void printer_func_unbind(struct usb_configuration *c,
1031 struct usb_function *f)
1033 usb_free_all_descriptors(f);
1036 static int printer_func_set_alt(struct usb_function *f,
1037 unsigned intf, unsigned alt)
1039 struct printer_dev *dev = container_of(f, struct printer_dev, function);
1040 int ret = -ENOTSUPP;
1043 ret = set_interface(dev, intf);
1048 static void printer_func_disable(struct usb_function *f)
1050 struct printer_dev *dev = container_of(f, struct printer_dev, function);
1051 unsigned long flags;
1053 DBG(dev, "%s\n", __func__);
1055 spin_lock_irqsave(&dev->lock, flags);
1056 printer_reset_interface(dev);
1057 spin_unlock_irqrestore(&dev->lock, flags);
1060 static void printer_cfg_unbind(struct usb_configuration *c)
1062 struct printer_dev *dev;
1063 struct usb_request *req;
1065 dev = &usb_printer_gadget;
1067 DBG(dev, "%s\n", __func__);
1069 /* Remove sysfs files */
1070 device_destroy(usb_gadget_class, g_printer_devno);
1072 /* Remove Character Device */
1073 cdev_del(&dev->printer_cdev);
1075 /* we must already have been disconnected ... no i/o may be active */
1076 WARN_ON(!list_empty(&dev->tx_reqs_active));
1077 WARN_ON(!list_empty(&dev->rx_reqs_active));
1079 /* Free all memory for this driver. */
1080 while (!list_empty(&dev->tx_reqs)) {
1081 req = container_of(dev->tx_reqs.next, struct usb_request,
1083 list_del(&req->list);
1084 printer_req_free(dev->in_ep, req);
1087 if (dev->current_rx_req != NULL)
1088 printer_req_free(dev->out_ep, dev->current_rx_req);
1090 while (!list_empty(&dev->rx_reqs)) {
1091 req = container_of(dev->rx_reqs.next,
1092 struct usb_request, list);
1093 list_del(&req->list);
1094 printer_req_free(dev->out_ep, req);
1097 while (!list_empty(&dev->rx_buffers)) {
1098 req = container_of(dev->rx_buffers.next,
1099 struct usb_request, list);
1100 list_del(&req->list);
1101 printer_req_free(dev->out_ep, req);
1105 static struct usb_configuration printer_cfg_driver = {
1107 .unbind = printer_cfg_unbind,
1108 .bConfigurationValue = 1,
1109 .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
1112 static int __init printer_bind_config(struct usb_configuration *c)
1114 struct usb_gadget *gadget = c->cdev->gadget;
1115 struct printer_dev *dev;
1116 int status = -ENOMEM;
1119 struct usb_request *req;
1121 usb_ep_autoconfig_reset(gadget);
1123 dev = &usb_printer_gadget;
1125 dev->function.name = shortname;
1126 dev->function.bind = printer_func_bind;
1127 dev->function.setup = printer_func_setup;
1128 dev->function.unbind = printer_func_unbind;
1129 dev->function.set_alt = printer_func_set_alt;
1130 dev->function.disable = printer_func_disable;
1132 status = usb_add_function(c, &dev->function);
1136 /* Setup the sysfs files for the printer gadget. */
1137 dev->pdev = device_create(usb_gadget_class, NULL, g_printer_devno,
1139 if (IS_ERR(dev->pdev)) {
1140 ERROR(dev, "Failed to create device: g_printer\n");
1141 status = PTR_ERR(dev->pdev);
1146 * Register a character device as an interface to a user mode
1147 * program that handles the printer specific functionality.
1149 cdev_init(&dev->printer_cdev, &printer_io_operations);
1150 dev->printer_cdev.owner = THIS_MODULE;
1151 status = cdev_add(&dev->printer_cdev, g_printer_devno, 1);
1153 ERROR(dev, "Failed to open char device\n");
1158 strlcpy(&pnp_string[2], iPNPstring, (sizeof pnp_string)-2);
1160 len = strlen(pnp_string);
1161 pnp_string[0] = (len >> 8) & 0xFF;
1162 pnp_string[1] = len & 0xFF;
1164 usb_gadget_set_selfpowered(gadget);
1166 if (gadget_is_otg(gadget)) {
1167 otg_descriptor.bmAttributes |= USB_OTG_HNP;
1168 printer_cfg_driver.descriptors = otg_desc;
1169 printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
1172 spin_lock_init(&dev->lock);
1173 mutex_init(&dev->lock_printer_io);
1174 INIT_LIST_HEAD(&dev->tx_reqs);
1175 INIT_LIST_HEAD(&dev->tx_reqs_active);
1176 INIT_LIST_HEAD(&dev->rx_reqs);
1177 INIT_LIST_HEAD(&dev->rx_reqs_active);
1178 INIT_LIST_HEAD(&dev->rx_buffers);
1179 init_waitqueue_head(&dev->rx_wait);
1180 init_waitqueue_head(&dev->tx_wait);
1181 init_waitqueue_head(&dev->tx_flush_wait);
1183 dev->interface = -1;
1184 dev->printer_cdev_open = 0;
1185 dev->printer_status = PRINTER_NOT_ERROR;
1186 dev->current_rx_req = NULL;
1187 dev->current_rx_bytes = 0;
1188 dev->current_rx_buf = NULL;
1190 for (i = 0; i < QLEN; i++) {
1191 req = printer_req_alloc(dev->in_ep, USB_BUFSIZE, GFP_KERNEL);
1193 while (!list_empty(&dev->tx_reqs)) {
1194 req = container_of(dev->tx_reqs.next,
1195 struct usb_request, list);
1196 list_del(&req->list);
1197 printer_req_free(dev->in_ep, req);
1201 list_add(&req->list, &dev->tx_reqs);
1204 for (i = 0; i < QLEN; i++) {
1205 req = printer_req_alloc(dev->out_ep, USB_BUFSIZE, GFP_KERNEL);
1207 while (!list_empty(&dev->rx_reqs)) {
1208 req = container_of(dev->rx_reqs.next,
1209 struct usb_request, list);
1210 list_del(&req->list);
1211 printer_req_free(dev->out_ep, req);
1215 list_add(&req->list, &dev->rx_reqs);
1218 /* finish hookup to lower layer ... */
1219 dev->gadget = gadget;
1221 INFO(dev, "%s, version: " DRIVER_VERSION "\n", driver_desc);
1225 printer_cfg_unbind(c);
1229 static int printer_unbind(struct usb_composite_dev *cdev)
1234 static int __init printer_bind(struct usb_composite_dev *cdev)
1238 ret = usb_string_ids_tab(cdev, strings);
1241 device_desc.iManufacturer = strings[USB_GADGET_MANUFACTURER_IDX].id;
1242 device_desc.iProduct = strings[USB_GADGET_PRODUCT_IDX].id;
1243 device_desc.iSerialNumber = strings[USB_GADGET_SERIAL_IDX].id;
1245 ret = usb_add_config(cdev, &printer_cfg_driver, printer_bind_config);
1248 usb_composite_overwrite_options(cdev, &coverwrite);
1252 static __refdata struct usb_composite_driver printer_driver = {
1254 .dev = &device_desc,
1255 .strings = dev_strings,
1256 .max_speed = USB_SPEED_HIGH,
1257 .bind = printer_bind,
1258 .unbind = printer_unbind,
1266 usb_gadget_class = class_create(THIS_MODULE, "usb_printer_gadget");
1267 if (IS_ERR(usb_gadget_class)) {
1268 status = PTR_ERR(usb_gadget_class);
1269 pr_err("unable to create usb_gadget class %d\n", status);
1273 status = alloc_chrdev_region(&g_printer_devno, 0, 1,
1274 "USB printer gadget");
1276 pr_err("alloc_chrdev_region %d\n", status);
1277 class_destroy(usb_gadget_class);
1281 status = usb_composite_probe(&printer_driver);
1283 class_destroy(usb_gadget_class);
1284 unregister_chrdev_region(g_printer_devno, 1);
1285 pr_err("usb_gadget_probe_driver %x\n", status);
1295 mutex_lock(&usb_printer_gadget.lock_printer_io);
1296 usb_composite_unregister(&printer_driver);
1297 unregister_chrdev_region(g_printer_devno, 1);
1298 class_destroy(usb_gadget_class);
1299 mutex_unlock(&usb_printer_gadget.lock_printer_io);
1301 module_exit(cleanup);
1303 MODULE_DESCRIPTION(DRIVER_DESC);
1304 MODULE_AUTHOR("Craig Nadler");
1305 MODULE_LICENSE("GPL");