2 # USB Dual Role (OTG-ready) Controller Drivers
3 # for silicon based on Mentor Graphics INVENTRA designs
6 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
8 tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
9 depends on (USB || USB_GADGET)
11 Say Y here if your system has a dual role high speed USB
12 controller based on the Mentor Graphics silicon IP. Then
13 configure options to match your silicon and the board
14 it's being used with, including the USB peripheral role,
15 or the USB host role, or both.
17 Texas Instruments families using this IP include DaVinci
18 (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
20 Analog Devices parts using this IP include Blackfin BF54x,
23 If you do not know what this is, please say N.
25 To compile this driver as a module, choose M here; the
26 module will be called "musb-hdrc".
31 bool "MUSB Mode Selection"
32 default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
33 default USB_MUSB_HOST if (USB && !USB_GADGET)
34 default USB_MUSB_GADGET if (!USB && USB_GADGET)
38 depends on USB=y || USB=USB_MUSB_HDRC
40 Select this when you want to use MUSB in host mode only,
41 thereby the gadget feature will be regressed.
43 config USB_MUSB_GADGET
44 bool "Gadget only mode"
45 depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
48 Select this when you want to use MUSB in gadget mode only,
49 thereby the host feature will be regressed.
51 config USB_MUSB_DUAL_ROLE
53 depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
56 This is the default mode of working of MUSB controller where
57 both host and gadget features are enabled.
61 comment "Platform Glue Layer"
63 config USB_MUSB_DAVINCI
65 depends on ARCH_DAVINCI_DMx
69 tristate "DA8xx/OMAP-L1x"
70 depends on ARCH_DAVINCI_DA8XX
73 config USB_MUSB_TUSB6010
76 config USB_MUSB_OMAP2PLUS
77 tristate "OMAP2430 and onwards"
78 depends on ARCH_OMAP2PLUS && USB
86 tristate "TI DSPS platforms"
87 select USB_MUSB_AM335X_CHILD
90 config USB_MUSB_BLACKFIN
92 depends on (BF54x && !BF544) || (BF52x && ! BF522 && !BF523)
95 tristate "Ux500 platforms"
97 config USB_MUSB_JZ4740
99 depends on MACH_JZ4740 || COMPILE_TEST
100 depends on USB_MUSB_GADGET
101 depends on USB_OTG_BLACKLIST_HUB
103 config USB_MUSB_AM335X_CHILD
107 prompt 'MUSB DMA mode'
108 default MUSB_PIO_ONLY if ARCH_MULTIPLATFORM || USB_MUSB_JZ4740
109 default USB_UX500_DMA if USB_MUSB_UX500
110 default USB_INVENTRA_DMA if USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
111 default USB_TI_CPPI_DMA if USB_MUSB_DAVINCI
112 default USB_TUSB_OMAP_DMA if USB_MUSB_TUSB6010
113 default MUSB_PIO_ONLY if USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X \
116 Unfortunately, only one option can be enabled here. Ideally one
117 should be able to build all these drivers into one kernel to
118 allow using DMA on multiplatform kernels.
121 bool 'ST Ericsson Ux500'
122 depends on USB_MUSB_UX500
124 Enable DMA transfers on UX500 platforms.
126 config USB_INVENTRA_DMA
128 depends on USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN
130 Enable DMA transfers using Mentor's engine.
132 config USB_TI_CPPI_DMA
133 bool 'TI CPPI (Davinci)'
134 depends on USB_MUSB_DAVINCI
136 Enable DMA transfers when TI CPPI DMA is available.
138 config USB_TI_CPPI41_DMA
139 bool 'TI CPPI 4.1 (AM335x)'
143 config USB_TUSB_OMAP_DMA
145 depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
148 Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
151 bool 'Disable DMA (always use PIO)'
153 All data is copied between memory and FIFO by the CPU.
154 DMA controllers are ignored.
156 Do not choose this unless DMA support for your SOC or board
157 is unavailable (or unstable). When DMA is enabled at compile time,
158 you can still disable it at run time using the "use_dma=n" module
163 endif # USB_MUSB_HDRC