2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License as published by
4 * the Free Software Foundation; either version 2 of the License, or
5 * (at your option) any later version.
7 * This program is distributed in the hope that it will be useful,
8 * but WITHOUT ANY WARRANTY; without even the implied warranty of
9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
10 * GNU General Public License for more details.
12 * You should have received a copy of the GNU General Public License
13 * along with this program; if not, write to the Free Software
14 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
16 * Clean ups from Moschip version and a few ioctl implementations by:
17 * Paul B Schroeder <pschroeder "at" uplogix "dot" com>
19 * Originally based on drivers/usb/serial/io_edgeport.c which is:
20 * Copyright (C) 2000 Inside Out Networks, All rights reserved.
21 * Copyright (C) 2001-2002 Greg Kroah-Hartman <greg@kroah.com>
25 #include <linux/kernel.h>
26 #include <linux/errno.h>
27 #include <linux/init.h>
28 #include <linux/slab.h>
29 #include <linux/tty.h>
30 #include <linux/tty_driver.h>
31 #include <linux/tty_flip.h>
32 #include <linux/module.h>
33 #include <linux/serial.h>
34 #include <linux/usb.h>
35 #include <linux/usb/serial.h>
36 #include <linux/uaccess.h>
38 #define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
41 * 16C50 UART register defines
44 #define LCR_BITS_5 0x00 /* 5 bits/char */
45 #define LCR_BITS_6 0x01 /* 6 bits/char */
46 #define LCR_BITS_7 0x02 /* 7 bits/char */
47 #define LCR_BITS_8 0x03 /* 8 bits/char */
48 #define LCR_BITS_MASK 0x03 /* Mask for bits/char field */
50 #define LCR_STOP_1 0x00 /* 1 stop bit */
51 #define LCR_STOP_1_5 0x04 /* 1.5 stop bits (if 5 bits/char) */
52 #define LCR_STOP_2 0x04 /* 2 stop bits (if 6-8 bits/char) */
53 #define LCR_STOP_MASK 0x04 /* Mask for stop bits field */
55 #define LCR_PAR_NONE 0x00 /* No parity */
56 #define LCR_PAR_ODD 0x08 /* Odd parity */
57 #define LCR_PAR_EVEN 0x18 /* Even parity */
58 #define LCR_PAR_MARK 0x28 /* Force parity bit to 1 */
59 #define LCR_PAR_SPACE 0x38 /* Force parity bit to 0 */
60 #define LCR_PAR_MASK 0x38 /* Mask for parity field */
62 #define LCR_SET_BREAK 0x40 /* Set Break condition */
63 #define LCR_DL_ENABLE 0x80 /* Enable access to divisor latch */
65 #define MCR_DTR 0x01 /* Assert DTR */
66 #define MCR_RTS 0x02 /* Assert RTS */
67 #define MCR_OUT1 0x04 /* Loopback only: Sets state of RI */
68 #define MCR_MASTER_IE 0x08 /* Enable interrupt outputs */
69 #define MCR_LOOPBACK 0x10 /* Set internal (digital) loopback mode */
70 #define MCR_XON_ANY 0x20 /* Enable any char to exit XOFF mode */
72 #define MOS7840_MSR_CTS 0x10 /* Current state of CTS */
73 #define MOS7840_MSR_DSR 0x20 /* Current state of DSR */
74 #define MOS7840_MSR_RI 0x40 /* Current state of RI */
75 #define MOS7840_MSR_CD 0x80 /* Current state of CD */
78 * Defines used for sending commands to port
81 #define MOS_WDR_TIMEOUT 5000 /* default urb timeout */
83 #define MOS_PORT1 0x0200
84 #define MOS_PORT2 0x0300
85 #define MOS_VENREG 0x0000
86 #define MOS_MAX_PORT 0x02
87 #define MOS_WRITE 0x0E
91 #define MCS_RD_RTYPE 0xC0
92 #define MCS_WR_RTYPE 0x40
93 #define MCS_RDREQ 0x0D
94 #define MCS_WRREQ 0x0E
95 #define MCS_CTRL_TIMEOUT 500
96 #define VENDOR_READ_LENGTH (0x01)
98 #define MAX_NAME_LEN 64
100 #define ZLP_REG1 0x3A /* Zero_Flag_Reg1 58 */
101 #define ZLP_REG5 0x3E /* Zero_Flag_Reg5 62 */
103 /* For higher baud Rates use TIOCEXBAUD */
104 #define TIOCEXBAUD 0x5462
106 /* vendor id and device id defines */
108 /* The native mos7840/7820 component */
109 #define USB_VENDOR_ID_MOSCHIP 0x9710
110 #define MOSCHIP_DEVICE_ID_7840 0x7840
111 #define MOSCHIP_DEVICE_ID_7820 0x7820
112 #define MOSCHIP_DEVICE_ID_7810 0x7810
113 /* The native component can have its vendor/device id's overridden
114 * in vendor-specific implementations. Such devices can be handled
115 * by making a change here, in id_table.
117 #define USB_VENDOR_ID_BANDB 0x0856
118 #define BANDB_DEVICE_ID_USO9ML2_2 0xAC22
119 #define BANDB_DEVICE_ID_USO9ML2_2P 0xBC00
120 #define BANDB_DEVICE_ID_USO9ML2_4 0xAC24
121 #define BANDB_DEVICE_ID_USO9ML2_4P 0xBC01
122 #define BANDB_DEVICE_ID_US9ML2_2 0xAC29
123 #define BANDB_DEVICE_ID_US9ML2_4 0xAC30
124 #define BANDB_DEVICE_ID_USPTL4_2 0xAC31
125 #define BANDB_DEVICE_ID_USPTL4_4 0xAC32
126 #define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
127 #define BANDB_DEVICE_ID_USOPTL4_2P 0xBC02
128 #define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
129 #define BANDB_DEVICE_ID_USOPTL4_4P 0xBC03
130 #define BANDB_DEVICE_ID_USOPTL2_4 0xAC24
132 /* This driver also supports
133 * ATEN UC2324 device using Moschip MCS7840
134 * ATEN UC2322 device using Moschip MCS7820
136 #define USB_VENDOR_ID_ATENINTL 0x0557
137 #define ATENINTL_DEVICE_ID_UC2324 0x2011
138 #define ATENINTL_DEVICE_ID_UC2322 0x7820
140 /* Interrupt Routine Defines */
142 #define SERIAL_IIR_RLS 0x06
143 #define SERIAL_IIR_MS 0x00
146 * Emulation of the bit mask on the LINE STATUS REGISTER.
148 #define SERIAL_LSR_DR 0x0001
149 #define SERIAL_LSR_OE 0x0002
150 #define SERIAL_LSR_PE 0x0004
151 #define SERIAL_LSR_FE 0x0008
152 #define SERIAL_LSR_BI 0x0010
154 #define MOS_MSR_DELTA_CTS 0x10
155 #define MOS_MSR_DELTA_DSR 0x20
156 #define MOS_MSR_DELTA_RI 0x40
157 #define MOS_MSR_DELTA_CD 0x80
159 /* Serial Port register Address */
160 #define INTERRUPT_ENABLE_REGISTER ((__u16)(0x01))
161 #define FIFO_CONTROL_REGISTER ((__u16)(0x02))
162 #define LINE_CONTROL_REGISTER ((__u16)(0x03))
163 #define MODEM_CONTROL_REGISTER ((__u16)(0x04))
164 #define LINE_STATUS_REGISTER ((__u16)(0x05))
165 #define MODEM_STATUS_REGISTER ((__u16)(0x06))
166 #define SCRATCH_PAD_REGISTER ((__u16)(0x07))
167 #define DIVISOR_LATCH_LSB ((__u16)(0x00))
168 #define DIVISOR_LATCH_MSB ((__u16)(0x01))
170 #define CLK_MULTI_REGISTER ((__u16)(0x02))
171 #define CLK_START_VALUE_REGISTER ((__u16)(0x03))
172 #define GPIO_REGISTER ((__u16)(0x07))
174 #define SERIAL_LCR_DLAB ((__u16)(0x0080))
177 * URB POOL related defines
179 #define NUM_URBS 16 /* URB Count */
180 #define URB_TRANSFER_BUFFER_SIZE 32 /* URB Size */
182 /* LED on/off milliseconds*/
183 #define LED_ON_MS 500
184 #define LED_OFF_MS 500
186 static int device_type;
188 static const struct usb_device_id id_table[] = {
189 {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
190 {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
191 {USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7810)},
192 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2)},
193 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_2P)},
194 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4)},
195 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USO9ML2_4P)},
196 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_2)},
197 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_US9ML2_4)},
198 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_2)},
199 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USPTL4_4)},
200 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
201 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2P)},
202 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
203 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4P)},
204 {USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL2_4)},
205 {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
206 {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
207 {} /* terminating entry */
209 MODULE_DEVICE_TABLE(usb, id_table);
211 /* This structure holds all of the local port information */
213 struct moschip_port {
214 int port_num; /*Actual port number in the device(1,2,etc) */
215 struct urb *write_urb; /* write URB for this port */
216 struct urb *read_urb; /* read URB for this port */
217 __u8 shadowLCR; /* last LCR value received */
218 __u8 shadowMCR; /* last MCR value received */
221 wait_queue_head_t wait_chase; /* for handling sleeping while waiting for chase to finish */
223 struct async_icount icount;
224 struct usb_serial_port *port; /* loop back to the owner of this object */
228 __u8 ControlRegOffset;
230 /* for processing control URBS in interrupt context */
231 struct urb *control_urb;
232 struct usb_ctrlrequest *dr;
236 spinlock_t pool_lock;
237 struct urb *write_urb_pool[NUM_URBS];
241 /* For device(s) with LED indicator */
244 struct timer_list led_timer1; /* Timer for LED on */
245 struct timer_list led_timer2; /* Timer for LED off */
249 * mos7840_set_reg_sync
250 * To set the Control register by calling usb_fill_control_urb function
251 * by passing usb_sndctrlpipe function as parameter.
254 static int mos7840_set_reg_sync(struct usb_serial_port *port, __u16 reg,
257 struct usb_device *dev = port->serial->dev;
259 dev_dbg(&port->dev, "mos7840_set_reg_sync offset is %x, value %x\n", reg, val);
261 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
262 MCS_WR_RTYPE, val, reg, NULL, 0,
267 * mos7840_get_reg_sync
268 * To set the Uart register by calling usb_fill_control_urb function by
269 * passing usb_rcvctrlpipe function as parameter.
272 static int mos7840_get_reg_sync(struct usb_serial_port *port, __u16 reg,
275 struct usb_device *dev = port->serial->dev;
279 buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
283 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
284 MCS_RD_RTYPE, 0, reg, buf, VENDOR_READ_LENGTH,
287 dev_dbg(&port->dev, "%s offset is %x, return val %x\n", __func__, reg, *val);
294 * mos7840_set_uart_reg
295 * To set the Uart register by calling usb_fill_control_urb function by
296 * passing usb_sndctrlpipe function as parameter.
299 static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
303 struct usb_device *dev = port->serial->dev;
305 /* For the UART control registers, the application number need
307 if (port->serial->num_ports == 4) {
308 val |= (((__u16) port->number -
309 (__u16) (port->serial->minor)) + 1) << 8;
311 if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
312 val |= (((__u16) port->number -
313 (__u16) (port->serial->minor)) + 1) << 8;
315 val |= (((__u16) port->number -
316 (__u16) (port->serial->minor)) + 2) << 8;
319 dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
320 return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ,
321 MCS_WR_RTYPE, val, reg, NULL, 0,
327 * mos7840_get_uart_reg
328 * To set the Control register by calling usb_fill_control_urb function
329 * by passing usb_rcvctrlpipe function as parameter.
331 static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
334 struct usb_device *dev = port->serial->dev;
339 buf = kmalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
343 /* Wval is same as application number */
344 if (port->serial->num_ports == 4) {
346 (((__u16) port->number - (__u16) (port->serial->minor)) +
349 if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
350 Wval = (((__u16) port->number -
351 (__u16) (port->serial->minor)) + 1) << 8;
353 Wval = (((__u16) port->number -
354 (__u16) (port->serial->minor)) + 2) << 8;
357 dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
358 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), MCS_RDREQ,
359 MCS_RD_RTYPE, Wval, reg, buf, VENDOR_READ_LENGTH,
367 static void mos7840_dump_serial_port(struct usb_serial_port *port,
368 struct moschip_port *mos7840_port)
371 dev_dbg(&port->dev, "SpRegOffset is %2x\n", mos7840_port->SpRegOffset);
372 dev_dbg(&port->dev, "ControlRegOffset is %2x\n", mos7840_port->ControlRegOffset);
373 dev_dbg(&port->dev, "DCRRegOffset is %2x\n", mos7840_port->DcrRegOffset);
377 /************************************************************************/
378 /************************************************************************/
379 /* I N T E R F A C E F U N C T I O N S */
380 /* I N T E R F A C E F U N C T I O N S */
381 /************************************************************************/
382 /************************************************************************/
384 static inline void mos7840_set_port_private(struct usb_serial_port *port,
385 struct moschip_port *data)
387 usb_set_serial_port_data(port, (void *)data);
390 static inline struct moschip_port *mos7840_get_port_private(struct
394 return (struct moschip_port *)usb_get_serial_port_data(port);
397 static void mos7840_handle_new_msr(struct moschip_port *port, __u8 new_msr)
399 struct moschip_port *mos7840_port;
400 struct async_icount *icount;
402 icount = &mos7840_port->icount;
404 (MOS_MSR_DELTA_CTS | MOS_MSR_DELTA_DSR | MOS_MSR_DELTA_RI |
406 icount = &mos7840_port->icount;
408 /* update input line counters */
409 if (new_msr & MOS_MSR_DELTA_CTS) {
413 if (new_msr & MOS_MSR_DELTA_DSR) {
417 if (new_msr & MOS_MSR_DELTA_CD) {
421 if (new_msr & MOS_MSR_DELTA_RI) {
426 mos7840_port->delta_msr_cond = 1;
427 wake_up_interruptible(&port->port->delta_msr_wait);
431 static void mos7840_handle_new_lsr(struct moschip_port *port, __u8 new_lsr)
433 struct async_icount *icount;
435 if (new_lsr & SERIAL_LSR_BI) {
437 * Parity and Framing errors only count if they
438 * occur exclusive of a break being
441 new_lsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
444 /* update input line counters */
445 icount = &port->icount;
446 if (new_lsr & SERIAL_LSR_BI) {
450 if (new_lsr & SERIAL_LSR_OE) {
454 if (new_lsr & SERIAL_LSR_PE) {
458 if (new_lsr & SERIAL_LSR_FE) {
464 /************************************************************************/
465 /************************************************************************/
466 /* U S B C A L L B A C K F U N C T I O N S */
467 /* U S B C A L L B A C K F U N C T I O N S */
468 /************************************************************************/
469 /************************************************************************/
471 static void mos7840_control_callback(struct urb *urb)
474 struct moschip_port *mos7840_port;
475 struct device *dev = &urb->dev->dev;
477 int status = urb->status;
479 mos7840_port = urb->context;
488 /* this urb is terminated, clean up */
489 dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
492 dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
496 dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
497 dev_dbg(dev, "%s mos7840_port->MsrLsr is %d port %d\n", __func__,
498 mos7840_port->MsrLsr, mos7840_port->port_num);
499 data = urb->transfer_buffer;
500 regval = (__u8) data[0];
501 dev_dbg(dev, "%s data is %x\n", __func__, regval);
502 if (mos7840_port->MsrLsr == 0)
503 mos7840_handle_new_msr(mos7840_port, regval);
504 else if (mos7840_port->MsrLsr == 1)
505 mos7840_handle_new_lsr(mos7840_port, regval);
508 static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
511 struct usb_device *dev = mcs->port->serial->dev;
512 struct usb_ctrlrequest *dr = mcs->dr;
513 unsigned char *buffer = mcs->ctrl_buf;
516 dr->bRequestType = MCS_RD_RTYPE;
517 dr->bRequest = MCS_RDREQ;
518 dr->wValue = cpu_to_le16(Wval); /* 0 */
519 dr->wIndex = cpu_to_le16(reg);
520 dr->wLength = cpu_to_le16(2);
522 usb_fill_control_urb(mcs->control_urb, dev, usb_rcvctrlpipe(dev, 0),
523 (unsigned char *)dr, buffer, 2,
524 mos7840_control_callback, mcs);
525 mcs->control_urb->transfer_buffer_length = 2;
526 ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
530 static void mos7840_set_led_callback(struct urb *urb)
532 switch (urb->status) {
539 /* This urb is terminated, clean up */
540 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d",
541 __func__, urb->status);
544 dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d",
545 __func__, urb->status);
549 static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
552 struct usb_device *dev = mcs->port->serial->dev;
553 struct usb_ctrlrequest *dr = mcs->dr;
555 dr->bRequestType = MCS_WR_RTYPE;
556 dr->bRequest = MCS_WRREQ;
557 dr->wValue = cpu_to_le16(wval);
558 dr->wIndex = cpu_to_le16(reg);
559 dr->wLength = cpu_to_le16(0);
561 usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0),
562 (unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL);
564 usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
567 static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg,
570 struct usb_device *dev = port->serial->dev;
572 usb_control_msg(dev, usb_sndctrlpipe(dev, 0), MCS_WRREQ, MCS_WR_RTYPE,
573 val, reg, NULL, 0, MOS_WDR_TIMEOUT);
576 static void mos7840_led_off(unsigned long arg)
578 struct moschip_port *mcs = (struct moschip_port *) arg;
581 mos7840_set_led_async(mcs, 0x0300, MODEM_CONTROL_REGISTER);
582 mod_timer(&mcs->led_timer2,
583 jiffies + msecs_to_jiffies(LED_OFF_MS));
586 static void mos7840_led_flag_off(unsigned long arg)
588 struct moschip_port *mcs = (struct moschip_port *) arg;
590 mcs->led_flag = false;
593 /*****************************************************************************
594 * mos7840_interrupt_callback
595 * this is the callback function for when we have received data on the
596 * interrupt endpoint.
597 *****************************************************************************/
599 static void mos7840_interrupt_callback(struct urb *urb)
603 struct moschip_port *mos7840_port;
604 struct usb_serial *serial;
609 __u16 wval, wreg = 0;
610 int status = urb->status;
619 /* this urb is terminated, clean up */
620 dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n",
624 dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d\n",
629 length = urb->actual_length;
630 data = urb->transfer_buffer;
632 serial = urb->context;
634 /* Moschip get 5 bytes
635 * Byte 1 IIR Port 1 (port.number is 0)
636 * Byte 2 IIR Port 2 (port.number is 1)
637 * Byte 3 IIR Port 3 (port.number is 2)
638 * Byte 4 IIR Port 4 (port.number is 3)
639 * Byte 5 FIFO status for both */
641 if (length && length > 5) {
642 dev_dbg(&urb->dev->dev, "%s", "Wrong data !!!\n");
646 sp[0] = (__u8) data[0];
647 sp[1] = (__u8) data[1];
648 sp[2] = (__u8) data[2];
649 sp[3] = (__u8) data[3];
652 for (i = 0; i < serial->num_ports; i++) {
653 mos7840_port = mos7840_get_port_private(serial->port[i]);
655 (((__u16) serial->port[i]->number -
656 (__u16) (serial->minor)) + 1) << 8;
657 if (mos7840_port->open) {
659 dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i);
661 switch (sp[i] & 0x0f) {
663 dev_dbg(&urb->dev->dev, "Serial Port %d: Receiver status error or \n", i);
664 dev_dbg(&urb->dev->dev, "address bit detected in 9-bit mode\n");
665 mos7840_port->MsrLsr = 1;
666 wreg = LINE_STATUS_REGISTER;
669 dev_dbg(&urb->dev->dev, "Serial Port %d: Modem status change\n", i);
670 mos7840_port->MsrLsr = 0;
671 wreg = MODEM_STATUS_REGISTER;
674 rv = mos7840_get_reg(mos7840_port, wval, wreg, &Data);
679 /* the completion handler for the control urb will resubmit */
682 result = usb_submit_urb(urb, GFP_ATOMIC);
684 dev_err(&urb->dev->dev,
685 "%s - Error %d submitting interrupt urb\n",
690 static int mos7840_port_paranoia_check(struct usb_serial_port *port,
691 const char *function)
694 pr_debug("%s - port == NULL\n", function);
698 pr_debug("%s - port->serial == NULL\n", function);
705 /* Inline functions to check the sanity of a pointer that is passed to us */
706 static int mos7840_serial_paranoia_check(struct usb_serial *serial,
707 const char *function)
710 pr_debug("%s - serial == NULL\n", function);
714 pr_debug("%s - serial->type == NULL!\n", function);
721 static struct usb_serial *mos7840_get_usb_serial(struct usb_serial_port *port,
722 const char *function)
724 /* if no port was specified, or it fails a paranoia check */
726 mos7840_port_paranoia_check(port, function) ||
727 mos7840_serial_paranoia_check(port->serial, function)) {
728 /* then say that we don't have a valid usb_serial thing,
729 * which will end up genrating -ENODEV return values */
736 /*****************************************************************************
737 * mos7840_bulk_in_callback
738 * this is the callback function for when we have received data on the
740 *****************************************************************************/
742 static void mos7840_bulk_in_callback(struct urb *urb)
746 struct usb_serial *serial;
747 struct usb_serial_port *port;
748 struct moschip_port *mos7840_port;
749 int status = urb->status;
751 mos7840_port = urb->context;
756 dev_dbg(&urb->dev->dev, "nonzero read bulk status received: %d\n", status);
757 mos7840_port->read_urb_busy = false;
761 port = mos7840_port->port;
762 if (mos7840_port_paranoia_check(port, __func__)) {
763 mos7840_port->read_urb_busy = false;
767 serial = mos7840_get_usb_serial(port, __func__);
769 mos7840_port->read_urb_busy = false;
773 data = urb->transfer_buffer;
774 usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data);
776 if (urb->actual_length) {
777 struct tty_port *tport = &mos7840_port->port->port;
778 tty_insert_flip_string(tport, data, urb->actual_length);
779 tty_flip_buffer_push(tport);
780 mos7840_port->icount.rx += urb->actual_length;
782 dev_dbg(&port->dev, "mos7840_port->icount.rx is %d:\n", mos7840_port->icount.rx);
785 if (!mos7840_port->read_urb) {
786 dev_dbg(&port->dev, "%s", "URB KILLED !!!\n");
787 mos7840_port->read_urb_busy = false;
792 if (mos7840_port->has_led && !mos7840_port->led_flag) {
793 mos7840_port->led_flag = true;
794 mos7840_set_led_async(mos7840_port, 0x0301,
795 MODEM_CONTROL_REGISTER);
796 mod_timer(&mos7840_port->led_timer1,
797 jiffies + msecs_to_jiffies(LED_ON_MS));
800 mos7840_port->read_urb_busy = true;
801 retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
804 dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, retval = %d\n", retval);
805 mos7840_port->read_urb_busy = false;
809 /*****************************************************************************
810 * mos7840_bulk_out_data_callback
811 * this is the callback function for when we have finished sending
812 * serial data on the bulk out endpoint.
813 *****************************************************************************/
815 static void mos7840_bulk_out_data_callback(struct urb *urb)
817 struct moschip_port *mos7840_port;
818 struct usb_serial_port *port;
819 struct tty_struct *tty;
820 int status = urb->status;
823 mos7840_port = urb->context;
824 port = mos7840_port->port;
825 spin_lock(&mos7840_port->pool_lock);
826 for (i = 0; i < NUM_URBS; i++) {
827 if (urb == mos7840_port->write_urb_pool[i]) {
828 mos7840_port->busy[i] = 0;
832 spin_unlock(&mos7840_port->pool_lock);
835 dev_dbg(&port->dev, "nonzero write bulk status received:%d\n", status);
839 if (mos7840_port_paranoia_check(port, __func__))
842 tty = tty_port_tty_get(&port->port);
843 if (tty && mos7840_port->open)
849 /************************************************************************/
850 /* D R I V E R T T Y I N T E R F A C E F U N C T I O N S */
851 /************************************************************************/
852 #ifdef MCSSerialProbe
853 static int mos7840_serial_probe(struct usb_serial *serial,
854 const struct usb_device_id *id)
857 /*need to implement the mode_reg reading and updating\
858 structures usb_serial_ device_type\
859 (i.e num_ports, num_bulkin,bulkout etc) */
860 /* Also we can update the changes attach */
865 /*****************************************************************************
867 * this function is called by the tty driver when a port is opened
868 * If successful, we return 0
869 * Otherwise we return a negative error number.
870 *****************************************************************************/
872 static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
876 struct usb_serial *serial;
880 struct moschip_port *mos7840_port;
881 struct moschip_port *port0;
883 if (mos7840_port_paranoia_check(port, __func__))
886 serial = port->serial;
888 if (mos7840_serial_paranoia_check(serial, __func__))
891 mos7840_port = mos7840_get_port_private(port);
892 port0 = mos7840_get_port_private(serial->port[0]);
894 if (mos7840_port == NULL || port0 == NULL)
897 usb_clear_halt(serial->dev, port->write_urb->pipe);
898 usb_clear_halt(serial->dev, port->read_urb->pipe);
901 /* Initialising the write urb pool */
902 for (j = 0; j < NUM_URBS; ++j) {
903 urb = usb_alloc_urb(0, GFP_KERNEL);
904 mos7840_port->write_urb_pool[j] = urb;
907 dev_err(&port->dev, "No more urbs???\n");
911 urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
913 if (!urb->transfer_buffer) {
915 mos7840_port->write_urb_pool[j] = NULL;
917 "%s-out of memory for urb buffers.\n",
923 /*****************************************************************************
924 * Initialize MCS7840 -- Write Init values to corresponding Registers
932 * 0x08 : SP1/2 Control Reg
933 *****************************************************************************/
935 /* NEED to check the following Block */
938 status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
940 dev_dbg(&port->dev, "Reading Spreg failed\n");
944 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
946 dev_dbg(&port->dev, "writing Spreg failed\n");
951 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
953 dev_dbg(&port->dev, "writing Spreg failed\n");
956 /* End of block to be checked */
959 status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
962 dev_dbg(&port->dev, "Reading Controlreg failed\n");
965 Data |= 0x08; /* Driver done bit */
966 Data |= 0x20; /* rx_disable */
967 status = mos7840_set_reg_sync(port,
968 mos7840_port->ControlRegOffset, Data);
970 dev_dbg(&port->dev, "writing Controlreg failed\n");
973 /* do register settings here */
974 /* Set all regs to the device default values. */
975 /***********************************
976 * First Disable all interrupts.
977 ***********************************/
979 status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
981 dev_dbg(&port->dev, "disabling interrupts failed\n");
984 /* Set FIFO_CONTROL_REGISTER to the default value */
986 status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
988 dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
993 status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
995 dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER failed\n");
1000 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1001 mos7840_port->shadowLCR = Data;
1004 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
1005 mos7840_port->shadowMCR = Data;
1008 status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
1009 mos7840_port->shadowLCR = Data;
1011 Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */
1012 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1015 status = mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
1018 status = mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
1021 status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
1023 Data = Data & ~SERIAL_LCR_DLAB;
1024 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1025 mos7840_port->shadowLCR = Data;
1027 /* clearing Bulkin and Bulkout Fifo */
1029 status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
1032 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
1034 Data = Data & ~0x0c;
1035 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
1036 /* Finally enable all interrupts */
1038 status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
1040 /* clearing rx_disable */
1042 status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
1044 Data = Data & ~0x20;
1045 status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
1050 status = mos7840_get_reg_sync(port, mos7840_port->ControlRegOffset,
1053 status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
1056 /* Check to see if we've set up our endpoint info yet *
1057 * (can't set it up in mos7840_startup as the structures *
1058 * were not set up at that time.) */
1059 if (port0->open_ports == 1) {
1060 if (serial->port[0]->interrupt_in_buffer == NULL) {
1061 /* set up interrupt urb */
1062 usb_fill_int_urb(serial->port[0]->interrupt_in_urb,
1064 usb_rcvintpipe(serial->dev,
1065 serial->port[0]->interrupt_in_endpointAddress),
1066 serial->port[0]->interrupt_in_buffer,
1067 serial->port[0]->interrupt_in_urb->
1068 transfer_buffer_length,
1069 mos7840_interrupt_callback,
1071 serial->port[0]->interrupt_in_urb->interval);
1073 /* start interrupt read for mos7840 *
1074 * will continue as long as mos7840 is connected */
1077 usb_submit_urb(serial->port[0]->interrupt_in_urb,
1080 dev_err(&port->dev, "%s - Error %d submitting "
1081 "interrupt urb\n", __func__, response);
1088 /* see if we've set up our endpoint info yet *
1089 * (can't set it up in mos7840_startup as the *
1090 * structures were not set up at that time.) */
1092 dev_dbg(&port->dev, "port number is %d\n", port->number);
1093 dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
1094 dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
1095 dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
1096 dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
1097 dev_dbg(&port->dev, "port's number in the device is %d\n", mos7840_port->port_num);
1098 mos7840_port->read_urb = port->read_urb;
1100 /* set up our bulk in urb */
1101 if ((serial->num_ports == 2)
1102 && ((((__u16)port->number -
1103 (__u16)(port->serial->minor)) % 2) != 0)) {
1104 usb_fill_bulk_urb(mos7840_port->read_urb,
1106 usb_rcvbulkpipe(serial->dev,
1107 (port->bulk_in_endpointAddress) + 2),
1108 port->bulk_in_buffer,
1109 mos7840_port->read_urb->transfer_buffer_length,
1110 mos7840_bulk_in_callback, mos7840_port);
1112 usb_fill_bulk_urb(mos7840_port->read_urb,
1114 usb_rcvbulkpipe(serial->dev,
1115 port->bulk_in_endpointAddress),
1116 port->bulk_in_buffer,
1117 mos7840_port->read_urb->transfer_buffer_length,
1118 mos7840_bulk_in_callback, mos7840_port);
1121 dev_dbg(&port->dev, "%s: bulkin endpoint is %d\n", __func__, port->bulk_in_endpointAddress);
1122 mos7840_port->read_urb_busy = true;
1123 response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
1125 dev_err(&port->dev, "%s - Error %d submitting control urb\n",
1126 __func__, response);
1127 mos7840_port->read_urb_busy = false;
1130 /* initialize our wait queues */
1131 init_waitqueue_head(&mos7840_port->wait_chase);
1133 /* initialize our icount structure */
1134 memset(&(mos7840_port->icount), 0x00, sizeof(mos7840_port->icount));
1136 /* initialize our port settings */
1137 /* Must set to enable ints! */
1138 mos7840_port->shadowMCR = MCR_MASTER_IE;
1139 /* send a open port command */
1140 mos7840_port->open = 1;
1141 /* mos7840_change_port_settings(mos7840_port,old_termios); */
1142 mos7840_port->icount.tx = 0;
1143 mos7840_port->icount.rx = 0;
1148 /*****************************************************************************
1149 * mos7840_chars_in_buffer
1150 * this function is called by the tty driver when it wants to know how many
1151 * bytes of data we currently have outstanding in the port (data that has
1152 * been written, but hasn't made it out the port yet)
1153 * If successful, we return the number of bytes left to be written in the
1155 * Otherwise we return zero.
1156 *****************************************************************************/
1158 static int mos7840_chars_in_buffer(struct tty_struct *tty)
1160 struct usb_serial_port *port = tty->driver_data;
1163 unsigned long flags;
1164 struct moschip_port *mos7840_port;
1166 if (mos7840_port_paranoia_check(port, __func__))
1169 mos7840_port = mos7840_get_port_private(port);
1170 if (mos7840_port == NULL)
1173 spin_lock_irqsave(&mos7840_port->pool_lock, flags);
1174 for (i = 0; i < NUM_URBS; ++i) {
1175 if (mos7840_port->busy[i]) {
1176 struct urb *urb = mos7840_port->write_urb_pool[i];
1177 chars += urb->transfer_buffer_length;
1180 spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
1181 dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars);
1186 /*****************************************************************************
1188 * this function is called by the tty driver when a port is closed
1189 *****************************************************************************/
1191 static void mos7840_close(struct usb_serial_port *port)
1193 struct usb_serial *serial;
1194 struct moschip_port *mos7840_port;
1195 struct moschip_port *port0;
1199 if (mos7840_port_paranoia_check(port, __func__))
1202 serial = mos7840_get_usb_serial(port, __func__);
1206 mos7840_port = mos7840_get_port_private(port);
1207 port0 = mos7840_get_port_private(serial->port[0]);
1209 if (mos7840_port == NULL || port0 == NULL)
1212 for (j = 0; j < NUM_URBS; ++j)
1213 usb_kill_urb(mos7840_port->write_urb_pool[j]);
1215 /* Freeing Write URBs */
1216 for (j = 0; j < NUM_URBS; ++j) {
1217 if (mos7840_port->write_urb_pool[j]) {
1218 if (mos7840_port->write_urb_pool[j]->transfer_buffer)
1219 kfree(mos7840_port->write_urb_pool[j]->
1222 usb_free_urb(mos7840_port->write_urb_pool[j]);
1226 /* While closing port, shutdown all bulk read, write *
1227 * and interrupt read if they exists */
1229 if (mos7840_port->write_urb) {
1230 dev_dbg(&port->dev, "%s", "Shutdown bulk write\n");
1231 usb_kill_urb(mos7840_port->write_urb);
1233 if (mos7840_port->read_urb) {
1234 dev_dbg(&port->dev, "%s", "Shutdown bulk read\n");
1235 usb_kill_urb(mos7840_port->read_urb);
1236 mos7840_port->read_urb_busy = false;
1238 if ((&mos7840_port->control_urb)) {
1239 dev_dbg(&port->dev, "%s", "Shutdown control read\n");
1240 /*/ usb_kill_urb (mos7840_port->control_urb); */
1243 /* if(mos7840_port->ctrl_buf != NULL) */
1244 /* kfree(mos7840_port->ctrl_buf); */
1245 port0->open_ports--;
1246 dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number);
1247 if (port0->open_ports == 0) {
1248 if (serial->port[0]->interrupt_in_urb) {
1249 dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
1250 usb_kill_urb(serial->port[0]->interrupt_in_urb);
1254 if (mos7840_port->write_urb) {
1255 /* if this urb had a transfer buffer already (old tx) free it */
1256 kfree(mos7840_port->write_urb->transfer_buffer);
1257 usb_free_urb(mos7840_port->write_urb);
1261 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
1264 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
1266 mos7840_port->open = 0;
1269 /************************************************************************
1271 * mos7840_block_until_chase_response
1273 * This function will block the close until one of the following:
1274 * 1. Response to our Chase comes from mos7840
1275 * 2. A timeout of 10 seconds without activity has expired
1276 * (1K of mos7840 data @ 2400 baud ==> 4 sec to empty)
1278 ************************************************************************/
1280 static void mos7840_block_until_chase_response(struct tty_struct *tty,
1281 struct moschip_port *mos7840_port)
1283 int timeout = msecs_to_jiffies(1000);
1288 count = mos7840_chars_in_buffer(tty);
1290 /* Check for Buffer status */
1294 /* Block the thread for a while */
1295 interruptible_sleep_on_timeout(&mos7840_port->wait_chase,
1297 /* No activity.. count down section */
1300 dev_dbg(&mos7840_port->port->dev, "%s - TIMEOUT\n", __func__);
1303 /* Reset timeout value back to seconds */
1310 /*****************************************************************************
1312 * this function sends a break to the port
1313 *****************************************************************************/
1314 static void mos7840_break(struct tty_struct *tty, int break_state)
1316 struct usb_serial_port *port = tty->driver_data;
1318 struct usb_serial *serial;
1319 struct moschip_port *mos7840_port;
1321 if (mos7840_port_paranoia_check(port, __func__))
1324 serial = mos7840_get_usb_serial(port, __func__);
1328 mos7840_port = mos7840_get_port_private(port);
1330 if (mos7840_port == NULL)
1334 /* flush and block until tx is empty */
1335 mos7840_block_until_chase_response(tty, mos7840_port);
1337 if (break_state == -1)
1338 data = mos7840_port->shadowLCR | LCR_SET_BREAK;
1340 data = mos7840_port->shadowLCR & ~LCR_SET_BREAK;
1342 /* FIXME: no locking on shadowLCR anywhere in driver */
1343 mos7840_port->shadowLCR = data;
1344 dev_dbg(&port->dev, "%s mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
1345 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER,
1346 mos7840_port->shadowLCR);
1349 /*****************************************************************************
1350 * mos7840_write_room
1351 * this function is called by the tty driver when it wants to know how many
1352 * bytes of data we can accept for a specific port.
1353 * If successful, we return the amount of room that we have for this port
1354 * Otherwise we return a negative error number.
1355 *****************************************************************************/
1357 static int mos7840_write_room(struct tty_struct *tty)
1359 struct usb_serial_port *port = tty->driver_data;
1362 unsigned long flags;
1363 struct moschip_port *mos7840_port;
1365 if (mos7840_port_paranoia_check(port, __func__))
1368 mos7840_port = mos7840_get_port_private(port);
1369 if (mos7840_port == NULL)
1372 spin_lock_irqsave(&mos7840_port->pool_lock, flags);
1373 for (i = 0; i < NUM_URBS; ++i) {
1374 if (!mos7840_port->busy[i])
1375 room += URB_TRANSFER_BUFFER_SIZE;
1377 spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
1379 room = (room == 0) ? 0 : room - URB_TRANSFER_BUFFER_SIZE + 1;
1380 dev_dbg(&mos7840_port->port->dev, "%s - returns %d\n", __func__, room);
1385 /*****************************************************************************
1387 * this function is called by the tty driver when data should be written to
1389 * If successful, we return the number of bytes written, otherwise we
1390 * return a negative error number.
1391 *****************************************************************************/
1393 static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
1394 const unsigned char *data, int count)
1400 unsigned long flags;
1402 struct moschip_port *mos7840_port;
1403 struct usb_serial *serial;
1406 const unsigned char *current_position = data;
1407 unsigned char *data1;
1411 status = mos7840_get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
1412 mos7840_port->shadowLCR = Data;
1413 dev_dbg(&port->dev, "%s: LINE_CONTROL_REGISTER is %x\n", __func__, Data);
1414 dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
1417 /* status = mos7840_set_uart_reg(port,LINE_CONTROL_REGISTER,Data); */
1418 /* mos7840_port->shadowLCR=Data;//Need to add later */
1420 Data |= SERIAL_LCR_DLAB; /* data latch enable in LCR 0x80 */
1421 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1424 /* status = mos7840_set_uart_reg(port,DIVISOR_LATCH_LSB,Data); */
1426 status = mos7840_get_uart_reg(port, DIVISOR_LATCH_LSB, &Data);
1427 dev_dbg(&port->dev, "%s: DLL value is %x\n", __func__, Data);
1430 status = mos7840_get_uart_reg(port, DIVISOR_LATCH_MSB, &Data);
1431 dev_dbg(&port->dev, "%s: DLM value is %x\n", __func__, Data);
1433 Data = Data & ~SERIAL_LCR_DLAB;
1434 dev_dbg(&port->dev, "%s: mos7840_port->shadowLCR is %x\n", __func__, mos7840_port->shadowLCR);
1435 status = mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1438 if (mos7840_port_paranoia_check(port, __func__))
1441 serial = port->serial;
1442 if (mos7840_serial_paranoia_check(serial, __func__))
1445 mos7840_port = mos7840_get_port_private(port);
1446 if (mos7840_port == NULL)
1449 /* try to find a free urb in the list */
1452 spin_lock_irqsave(&mos7840_port->pool_lock, flags);
1453 for (i = 0; i < NUM_URBS; ++i) {
1454 if (!mos7840_port->busy[i]) {
1455 mos7840_port->busy[i] = 1;
1456 urb = mos7840_port->write_urb_pool[i];
1457 dev_dbg(&port->dev, "URB:%d\n", i);
1461 spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
1464 dev_dbg(&port->dev, "%s - no more free urbs\n", __func__);
1468 if (urb->transfer_buffer == NULL) {
1469 urb->transfer_buffer =
1470 kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
1472 if (urb->transfer_buffer == NULL) {
1473 dev_err_console(port, "%s no more kernel memory...\n",
1478 transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
1480 memcpy(urb->transfer_buffer, current_position, transfer_size);
1482 /* fill urb with data and submit */
1483 if ((serial->num_ports == 2)
1484 && ((((__u16)port->number -
1485 (__u16)(port->serial->minor)) % 2) != 0)) {
1486 usb_fill_bulk_urb(urb,
1488 usb_sndbulkpipe(serial->dev,
1489 (port->bulk_out_endpointAddress) + 2),
1490 urb->transfer_buffer,
1492 mos7840_bulk_out_data_callback, mos7840_port);
1494 usb_fill_bulk_urb(urb,
1496 usb_sndbulkpipe(serial->dev,
1497 port->bulk_out_endpointAddress),
1498 urb->transfer_buffer,
1500 mos7840_bulk_out_data_callback, mos7840_port);
1503 data1 = urb->transfer_buffer;
1504 dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
1507 if (mos7840_port->has_led && !mos7840_port->led_flag) {
1508 mos7840_port->led_flag = true;
1509 mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301);
1510 mod_timer(&mos7840_port->led_timer1,
1511 jiffies + msecs_to_jiffies(LED_ON_MS));
1514 /* send it down the pipe */
1515 status = usb_submit_urb(urb, GFP_ATOMIC);
1518 mos7840_port->busy[i] = 0;
1519 dev_err_console(port, "%s - usb_submit_urb(write bulk) failed "
1520 "with status = %d\n", __func__, status);
1521 bytes_sent = status;
1524 bytes_sent = transfer_size;
1525 mos7840_port->icount.tx += transfer_size;
1527 dev_dbg(&port->dev, "mos7840_port->icount.tx is %d:\n", mos7840_port->icount.tx);
1533 /*****************************************************************************
1535 * this function is called by the tty driver when it wants to stop the data
1536 * being read from the port.
1537 *****************************************************************************/
1539 static void mos7840_throttle(struct tty_struct *tty)
1541 struct usb_serial_port *port = tty->driver_data;
1542 struct moschip_port *mos7840_port;
1545 if (mos7840_port_paranoia_check(port, __func__))
1548 mos7840_port = mos7840_get_port_private(port);
1550 if (mos7840_port == NULL)
1553 if (!mos7840_port->open) {
1554 dev_dbg(&port->dev, "%s", "port not opened\n");
1558 /* if we are implementing XON/XOFF, send the stop character */
1560 unsigned char stop_char = STOP_CHAR(tty);
1561 status = mos7840_write(tty, port, &stop_char, 1);
1565 /* if we are implementing RTS/CTS, toggle that line */
1566 if (tty->termios.c_cflag & CRTSCTS) {
1567 mos7840_port->shadowMCR &= ~MCR_RTS;
1568 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
1569 mos7840_port->shadowMCR);
1575 /*****************************************************************************
1576 * mos7840_unthrottle
1577 * this function is called by the tty driver when it wants to resume
1578 * the data being read from the port (called after mos7840_throttle is
1580 *****************************************************************************/
1581 static void mos7840_unthrottle(struct tty_struct *tty)
1583 struct usb_serial_port *port = tty->driver_data;
1585 struct moschip_port *mos7840_port = mos7840_get_port_private(port);
1587 if (mos7840_port_paranoia_check(port, __func__))
1590 if (mos7840_port == NULL)
1593 if (!mos7840_port->open) {
1594 dev_dbg(&port->dev, "%s - port not opened\n", __func__);
1598 /* if we are implementing XON/XOFF, send the start character */
1600 unsigned char start_char = START_CHAR(tty);
1601 status = mos7840_write(tty, port, &start_char, 1);
1606 /* if we are implementing RTS/CTS, toggle that line */
1607 if (tty->termios.c_cflag & CRTSCTS) {
1608 mos7840_port->shadowMCR |= MCR_RTS;
1609 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
1610 mos7840_port->shadowMCR);
1616 static int mos7840_tiocmget(struct tty_struct *tty)
1618 struct usb_serial_port *port = tty->driver_data;
1619 struct moschip_port *mos7840_port;
1620 unsigned int result;
1624 mos7840_port = mos7840_get_port_private(port);
1626 if (mos7840_port == NULL)
1629 status = mos7840_get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
1630 status = mos7840_get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
1631 result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
1632 | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
1633 | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
1634 | ((msr & MOS7840_MSR_CTS) ? TIOCM_CTS : 0)
1635 | ((msr & MOS7840_MSR_CD) ? TIOCM_CAR : 0)
1636 | ((msr & MOS7840_MSR_RI) ? TIOCM_RI : 0)
1637 | ((msr & MOS7840_MSR_DSR) ? TIOCM_DSR : 0);
1639 dev_dbg(&port->dev, "%s - 0x%04X\n", __func__, result);
1644 static int mos7840_tiocmset(struct tty_struct *tty,
1645 unsigned int set, unsigned int clear)
1647 struct usb_serial_port *port = tty->driver_data;
1648 struct moschip_port *mos7840_port;
1652 mos7840_port = mos7840_get_port_private(port);
1654 if (mos7840_port == NULL)
1657 /* FIXME: What locks the port registers ? */
1658 mcr = mos7840_port->shadowMCR;
1659 if (clear & TIOCM_RTS)
1661 if (clear & TIOCM_DTR)
1663 if (clear & TIOCM_LOOP)
1664 mcr &= ~MCR_LOOPBACK;
1666 if (set & TIOCM_RTS)
1668 if (set & TIOCM_DTR)
1670 if (set & TIOCM_LOOP)
1671 mcr |= MCR_LOOPBACK;
1673 mos7840_port->shadowMCR = mcr;
1675 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
1677 dev_dbg(&port->dev, "setting MODEM_CONTROL_REGISTER Failed\n");
1684 /*****************************************************************************
1685 * mos7840_calc_baud_rate_divisor
1686 * this function calculates the proper baud rate divisor for the specified
1688 *****************************************************************************/
1689 static int mos7840_calc_baud_rate_divisor(struct usb_serial_port *port,
1690 int baudRate, int *divisor,
1693 dev_dbg(&port->dev, "%s - %d\n", __func__, baudRate);
1695 if (baudRate <= 115200) {
1696 *divisor = 115200 / baudRate;
1699 if ((baudRate > 115200) && (baudRate <= 230400)) {
1700 *divisor = 230400 / baudRate;
1701 *clk_sel_val = 0x10;
1702 } else if ((baudRate > 230400) && (baudRate <= 403200)) {
1703 *divisor = 403200 / baudRate;
1704 *clk_sel_val = 0x20;
1705 } else if ((baudRate > 403200) && (baudRate <= 460800)) {
1706 *divisor = 460800 / baudRate;
1707 *clk_sel_val = 0x30;
1708 } else if ((baudRate > 460800) && (baudRate <= 806400)) {
1709 *divisor = 806400 / baudRate;
1710 *clk_sel_val = 0x40;
1711 } else if ((baudRate > 806400) && (baudRate <= 921600)) {
1712 *divisor = 921600 / baudRate;
1713 *clk_sel_val = 0x50;
1714 } else if ((baudRate > 921600) && (baudRate <= 1572864)) {
1715 *divisor = 1572864 / baudRate;
1716 *clk_sel_val = 0x60;
1717 } else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
1718 *divisor = 3145728 / baudRate;
1719 *clk_sel_val = 0x70;
1725 for (i = 0; i < ARRAY_SIZE(mos7840_divisor_table); i++) {
1726 if (mos7840_divisor_table[i].BaudRate == baudrate) {
1727 *divisor = mos7840_divisor_table[i].Divisor;
1732 /* After trying for all the standard baud rates *
1733 * Try calculating the divisor for this baud rate */
1735 if (baudrate > 75 && baudrate < 230400) {
1736 /* get the divisor */
1737 custom = (__u16) (230400L / baudrate);
1739 /* Check for round off */
1740 round1 = (__u16) (2304000L / baudrate);
1741 round = (__u16) (round1 - (custom * 10));
1746 dev_dbg(&port->dev, " Baud %d = %d\n", baudrate, custom);
1750 dev_dbg(&port->dev, "%s", " Baud calculation Failed...\n");
1755 /*****************************************************************************
1756 * mos7840_send_cmd_write_baud_rate
1757 * this function sends the proper command to change the baud rate of the
1759 *****************************************************************************/
1761 static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
1767 unsigned char number;
1769 struct usb_serial_port *port;
1771 if (mos7840_port == NULL)
1774 port = mos7840_port->port;
1775 if (mos7840_port_paranoia_check(port, __func__))
1778 if (mos7840_serial_paranoia_check(port->serial, __func__))
1781 number = mos7840_port->port->number - mos7840_port->port->serial->minor;
1783 dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__,
1784 mos7840_port->port->number, baudRate);
1785 /* reset clk_uart_sel in spregOffset */
1786 if (baudRate > 115200) {
1787 #ifdef HW_flow_control
1788 /* NOTE: need to see the pther register to modify */
1789 /* setting h/w flow control bit to 1 */
1791 mos7840_port->shadowMCR = Data;
1792 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
1795 dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
1801 #ifdef HW_flow_control
1802 /* setting h/w flow control bit to 0 */
1804 mos7840_port->shadowMCR = Data;
1805 status = mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER,
1808 dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
1815 if (1) { /* baudRate <= 115200) */
1818 status = mos7840_calc_baud_rate_divisor(port, baudRate, &divisor,
1820 status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset,
1823 dev_dbg(&port->dev, "reading spreg failed in set_serial_baud\n");
1826 Data = (Data & 0x8f) | clk_sel_val;
1827 status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset,
1830 dev_dbg(&port->dev, "Writing spreg failed in set_serial_baud\n");
1833 /* Calculate the Divisor */
1836 dev_err(&port->dev, "%s - bad baud rate\n", __func__);
1839 /* Enable access to divisor latch */
1840 Data = mos7840_port->shadowLCR | SERIAL_LCR_DLAB;
1841 mos7840_port->shadowLCR = Data;
1842 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1844 /* Write the divisor */
1845 Data = (unsigned char)(divisor & 0xff);
1846 dev_dbg(&port->dev, "set_serial_baud Value to write DLL is %x\n", Data);
1847 mos7840_set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
1849 Data = (unsigned char)((divisor & 0xff00) >> 8);
1850 dev_dbg(&port->dev, "set_serial_baud Value to write DLM is %x\n", Data);
1851 mos7840_set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
1853 /* Disable access to divisor latch */
1854 Data = mos7840_port->shadowLCR & ~SERIAL_LCR_DLAB;
1855 mos7840_port->shadowLCR = Data;
1856 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1862 /*****************************************************************************
1863 * mos7840_change_port_settings
1864 * This routine is called to set the UART on the device to match
1865 * the specified new settings.
1866 *****************************************************************************/
1868 static void mos7840_change_port_settings(struct tty_struct *tty,
1869 struct moschip_port *mos7840_port, struct ktermios *old_termios)
1879 struct usb_serial_port *port;
1880 struct usb_serial *serial;
1882 if (mos7840_port == NULL)
1885 port = mos7840_port->port;
1887 if (mos7840_port_paranoia_check(port, __func__))
1890 if (mos7840_serial_paranoia_check(port->serial, __func__))
1893 serial = port->serial;
1895 if (!mos7840_port->open) {
1896 dev_dbg(&port->dev, "%s - port not opened\n", __func__);
1902 lParity = LCR_PAR_NONE;
1904 cflag = tty->termios.c_cflag;
1905 iflag = tty->termios.c_iflag;
1907 /* Change the number of bits */
1908 if (cflag & CSIZE) {
1909 switch (cflag & CSIZE) {
1927 /* Change the Parity bit */
1928 if (cflag & PARENB) {
1929 if (cflag & PARODD) {
1930 lParity = LCR_PAR_ODD;
1931 dev_dbg(&port->dev, "%s - parity = odd\n", __func__);
1933 lParity = LCR_PAR_EVEN;
1934 dev_dbg(&port->dev, "%s - parity = even\n", __func__);
1938 dev_dbg(&port->dev, "%s - parity = none\n", __func__);
1942 lParity = lParity | 0x20;
1944 /* Change the Stop bit */
1945 if (cflag & CSTOPB) {
1947 dev_dbg(&port->dev, "%s - stop bits = 2\n", __func__);
1950 dev_dbg(&port->dev, "%s - stop bits = 1\n", __func__);
1953 /* Update the LCR with the correct value */
1954 mos7840_port->shadowLCR &=
1955 ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
1956 mos7840_port->shadowLCR |= (lData | lParity | lStop);
1958 dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is %x\n", __func__,
1959 mos7840_port->shadowLCR);
1960 /* Disable Interrupts */
1962 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
1965 mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
1968 mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
1970 /* Send the updated LCR value to the mos7840 */
1971 Data = mos7840_port->shadowLCR;
1973 mos7840_set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
1976 mos7840_port->shadowMCR = Data;
1977 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
1979 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
1981 /* set up the MCR register and send it to the mos7840 */
1983 mos7840_port->shadowMCR = MCR_MASTER_IE;
1985 mos7840_port->shadowMCR |= (MCR_DTR | MCR_RTS);
1987 if (cflag & CRTSCTS)
1988 mos7840_port->shadowMCR |= (MCR_XON_ANY);
1990 mos7840_port->shadowMCR &= ~(MCR_XON_ANY);
1992 Data = mos7840_port->shadowMCR;
1993 mos7840_set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
1995 /* Determine divisor based on baud rate */
1996 baud = tty_get_baud_rate(tty);
1999 /* pick a default, any default... */
2000 dev_dbg(&port->dev, "%s", "Picked default baud...\n");
2004 dev_dbg(&port->dev, "%s - baud rate = %d\n", __func__, baud);
2005 status = mos7840_send_cmd_write_baud_rate(mos7840_port, baud);
2007 /* Enable Interrupts */
2009 mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
2011 if (mos7840_port->read_urb_busy == false) {
2012 mos7840_port->read_urb_busy = true;
2013 status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
2015 dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
2017 mos7840_port->read_urb_busy = false;
2020 dev_dbg(&port->dev, "%s - mos7840_port->shadowLCR is End %x\n", __func__,
2021 mos7840_port->shadowLCR);
2024 /*****************************************************************************
2025 * mos7840_set_termios
2026 * this function is called by the tty driver when it wants to change
2027 * the termios structure
2028 *****************************************************************************/
2030 static void mos7840_set_termios(struct tty_struct *tty,
2031 struct usb_serial_port *port,
2032 struct ktermios *old_termios)
2036 struct usb_serial *serial;
2037 struct moschip_port *mos7840_port;
2039 if (mos7840_port_paranoia_check(port, __func__))
2042 serial = port->serial;
2044 if (mos7840_serial_paranoia_check(serial, __func__))
2047 mos7840_port = mos7840_get_port_private(port);
2049 if (mos7840_port == NULL)
2052 if (!mos7840_port->open) {
2053 dev_dbg(&port->dev, "%s - port not opened\n", __func__);
2057 dev_dbg(&port->dev, "%s", "setting termios - \n");
2059 cflag = tty->termios.c_cflag;
2061 dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__,
2062 tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
2063 dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
2064 old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
2065 dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
2067 /* change the port settings to the new ones specified */
2069 mos7840_change_port_settings(tty, mos7840_port, old_termios);
2071 if (!mos7840_port->read_urb) {
2072 dev_dbg(&port->dev, "%s", "URB KILLED !!!!!\n");
2076 if (mos7840_port->read_urb_busy == false) {
2077 mos7840_port->read_urb_busy = true;
2078 status = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
2080 dev_dbg(&port->dev, "usb_submit_urb(read bulk) failed, status = %d\n",
2082 mos7840_port->read_urb_busy = false;
2087 /*****************************************************************************
2088 * mos7840_get_lsr_info - get line status register info
2090 * Purpose: Let user call ioctl() to get info when the UART physically
2091 * is emptied. On bus types like RS485, the transmitter must
2092 * release the bus after transmitting. This must be done when
2093 * the transmit shift register is empty, not be done when the
2094 * transmit holding register is empty. This functionality
2095 * allows an RS485 driver to be written in user space.
2096 *****************************************************************************/
2098 static int mos7840_get_lsr_info(struct tty_struct *tty,
2099 unsigned int __user *value)
2102 unsigned int result = 0;
2104 count = mos7840_chars_in_buffer(tty);
2106 result = TIOCSER_TEMT;
2108 if (copy_to_user(value, &result, sizeof(int)))
2113 /*****************************************************************************
2114 * mos7840_get_serial_info
2115 * function to get information about serial port
2116 *****************************************************************************/
2118 static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
2119 struct serial_struct __user *retinfo)
2121 struct serial_struct tmp;
2123 if (mos7840_port == NULL)
2129 memset(&tmp, 0, sizeof(tmp));
2131 tmp.type = PORT_16550A;
2132 tmp.line = mos7840_port->port->serial->minor;
2133 tmp.port = mos7840_port->port->number;
2135 tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
2136 tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
2137 tmp.baud_base = 9600;
2138 tmp.close_delay = 5 * HZ;
2139 tmp.closing_wait = 30 * HZ;
2141 if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
2146 static int mos7840_get_icount(struct tty_struct *tty,
2147 struct serial_icounter_struct *icount)
2149 struct usb_serial_port *port = tty->driver_data;
2150 struct moschip_port *mos7840_port;
2151 struct async_icount cnow;
2153 mos7840_port = mos7840_get_port_private(port);
2154 cnow = mos7840_port->icount;
2157 icount->cts = cnow.cts;
2158 icount->dsr = cnow.dsr;
2159 icount->rng = cnow.rng;
2160 icount->dcd = cnow.dcd;
2161 icount->rx = cnow.rx;
2162 icount->tx = cnow.tx;
2163 icount->frame = cnow.frame;
2164 icount->overrun = cnow.overrun;
2165 icount->parity = cnow.parity;
2166 icount->brk = cnow.brk;
2167 icount->buf_overrun = cnow.buf_overrun;
2169 dev_dbg(&port->dev, "%s TIOCGICOUNT RX=%d, TX=%d\n", __func__,
2170 icount->rx, icount->tx);
2174 /*****************************************************************************
2176 * this function handles any ioctl calls to the driver
2177 *****************************************************************************/
2179 static int mos7840_ioctl(struct tty_struct *tty,
2180 unsigned int cmd, unsigned long arg)
2182 struct usb_serial_port *port = tty->driver_data;
2183 void __user *argp = (void __user *)arg;
2184 struct moschip_port *mos7840_port;
2186 struct async_icount cnow;
2187 struct async_icount cprev;
2189 if (mos7840_port_paranoia_check(port, __func__))
2192 mos7840_port = mos7840_get_port_private(port);
2194 if (mos7840_port == NULL)
2197 dev_dbg(&port->dev, "%s - cmd = 0x%x\n", __func__, cmd);
2200 /* return number of bytes available */
2203 dev_dbg(&port->dev, "%s TIOCSERGETLSR\n", __func__);
2204 return mos7840_get_lsr_info(tty, argp);
2207 dev_dbg(&port->dev, "%s TIOCGSERIAL\n", __func__);
2208 return mos7840_get_serial_info(mos7840_port, argp);
2211 dev_dbg(&port->dev, "%s TIOCSSERIAL\n", __func__);
2215 dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__);
2216 cprev = mos7840_port->icount;
2218 /* interruptible_sleep_on(&mos7840_port->delta_msr_wait); */
2219 mos7840_port->delta_msr_cond = 0;
2220 wait_event_interruptible(port->delta_msr_wait,
2221 (port->serial->disconnected ||
2223 delta_msr_cond == 1));
2225 /* see if a signal did it */
2226 if (signal_pending(current))
2227 return -ERESTARTSYS;
2229 if (port->serial->disconnected)
2232 cnow = mos7840_port->icount;
2234 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2235 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
2236 return -EIO; /* no change => error */
2237 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
2238 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
2239 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
2240 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
2251 return -ENOIOCTLCMD;
2254 static int mos7810_check(struct usb_serial *serial)
2256 int i, pass_count = 0;
2257 __u16 data = 0, mcr_data = 0;
2258 __u16 test_pattern = 0x55AA;
2260 /* Store MCR setting */
2261 usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
2262 MCS_RDREQ, MCS_RD_RTYPE, 0x0300, MODEM_CONTROL_REGISTER,
2263 &mcr_data, VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
2265 for (i = 0; i < 16; i++) {
2266 /* Send the 1-bit test pattern out to MCS7810 test pin */
2267 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
2268 MCS_WRREQ, MCS_WR_RTYPE,
2269 (0x0300 | (((test_pattern >> i) & 0x0001) << 1)),
2270 MODEM_CONTROL_REGISTER, NULL, 0, MOS_WDR_TIMEOUT);
2272 /* Read the test pattern back */
2273 usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
2274 MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
2275 VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
2277 /* If this is a MCS7810 device, both test patterns must match */
2278 if (((test_pattern >> i) ^ (~data >> 1)) & 0x0001)
2284 /* Restore MCR setting */
2285 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), MCS_WRREQ,
2286 MCS_WR_RTYPE, 0x0300 | mcr_data, MODEM_CONTROL_REGISTER, NULL,
2287 0, MOS_WDR_TIMEOUT);
2289 if (pass_count == 16)
2295 static int mos7840_calc_num_ports(struct usb_serial *serial)
2298 int mos7840_num_ports;
2300 usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
2301 MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, &data,
2302 VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
2304 if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
2305 serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
2306 device_type = serial->dev->descriptor.idProduct;
2308 /* For a MCS7840 device GPIO0 must be set to 1 */
2309 if ((data & 0x01) == 1)
2310 device_type = MOSCHIP_DEVICE_ID_7840;
2311 else if (mos7810_check(serial))
2312 device_type = MOSCHIP_DEVICE_ID_7810;
2314 device_type = MOSCHIP_DEVICE_ID_7820;
2317 mos7840_num_ports = (device_type >> 4) & 0x000F;
2318 serial->num_bulk_in = mos7840_num_ports;
2319 serial->num_bulk_out = mos7840_num_ports;
2320 serial->num_ports = mos7840_num_ports;
2322 return mos7840_num_ports;
2325 static int mos7840_port_probe(struct usb_serial_port *port)
2327 struct usb_serial *serial = port->serial;
2328 struct moschip_port *mos7840_port;
2333 /* we set up the pointers to the endpoints in the mos7840_open *
2334 * function, as the structures aren't created yet. */
2336 pnum = port->number - serial->minor;
2338 dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
2339 mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
2340 if (mos7840_port == NULL) {
2341 dev_err(&port->dev, "%s - Out of memory\n", __func__);
2345 /* Initialize all port interrupt end point to port 0 int
2346 * endpoint. Our device has only one interrupt end point
2347 * common to all port */
2349 mos7840_port->port = port;
2350 mos7840_set_port_private(port, mos7840_port);
2351 spin_lock_init(&mos7840_port->pool_lock);
2353 /* minor is not initialised until later by
2354 * usb-serial.c:get_free_serial() and cannot therefore be used
2355 * to index device instances */
2356 mos7840_port->port_num = pnum + 1;
2357 dev_dbg(&port->dev, "port->number = %d\n", port->number);
2358 dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor);
2359 dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
2360 dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor);
2362 if (mos7840_port->port_num == 1) {
2363 mos7840_port->SpRegOffset = 0x0;
2364 mos7840_port->ControlRegOffset = 0x1;
2365 mos7840_port->DcrRegOffset = 0x4;
2366 } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 4)) {
2367 mos7840_port->SpRegOffset = 0x8;
2368 mos7840_port->ControlRegOffset = 0x9;
2369 mos7840_port->DcrRegOffset = 0x16;
2370 } else if ((mos7840_port->port_num == 2) && (serial->num_ports == 2)) {
2371 mos7840_port->SpRegOffset = 0xa;
2372 mos7840_port->ControlRegOffset = 0xb;
2373 mos7840_port->DcrRegOffset = 0x19;
2374 } else if ((mos7840_port->port_num == 3) && (serial->num_ports == 4)) {
2375 mos7840_port->SpRegOffset = 0xa;
2376 mos7840_port->ControlRegOffset = 0xb;
2377 mos7840_port->DcrRegOffset = 0x19;
2378 } else if ((mos7840_port->port_num == 4) && (serial->num_ports == 4)) {
2379 mos7840_port->SpRegOffset = 0xc;
2380 mos7840_port->ControlRegOffset = 0xd;
2381 mos7840_port->DcrRegOffset = 0x1c;
2383 mos7840_dump_serial_port(port, mos7840_port);
2384 mos7840_set_port_private(port, mos7840_port);
2386 /* enable rx_disable bit in control register */
2387 status = mos7840_get_reg_sync(port,
2388 mos7840_port->ControlRegOffset, &Data);
2390 dev_dbg(&port->dev, "Reading ControlReg failed status-0x%x\n", status);
2393 dev_dbg(&port->dev, "ControlReg Reading success val is %x, status%d\n", Data, status);
2394 Data |= 0x08; /* setting driver done bit */
2395 Data |= 0x04; /* sp1_bit to have cts change reflect in
2398 /* Data |= 0x20; //rx_disable bit */
2399 status = mos7840_set_reg_sync(port,
2400 mos7840_port->ControlRegOffset, Data);
2402 dev_dbg(&port->dev, "Writing ControlReg failed(rx_disable) status-0x%x\n", status);
2405 dev_dbg(&port->dev, "ControlReg Writing success(rx_disable) status%d\n", status);
2407 /* Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
2410 status = mos7840_set_reg_sync(port,
2411 (__u16) (mos7840_port->DcrRegOffset + 0), Data);
2413 dev_dbg(&port->dev, "Writing DCR0 failed status-0x%x\n", status);
2416 dev_dbg(&port->dev, "DCR0 Writing success status%d\n", status);
2419 status = mos7840_set_reg_sync(port,
2420 (__u16) (mos7840_port->DcrRegOffset + 1), Data);
2422 dev_dbg(&port->dev, "Writing DCR1 failed status-0x%x\n", status);
2425 dev_dbg(&port->dev, "DCR1 Writing success status%d\n", status);
2428 status = mos7840_set_reg_sync(port,
2429 (__u16) (mos7840_port->DcrRegOffset + 2), Data);
2431 dev_dbg(&port->dev, "Writing DCR2 failed status-0x%x\n", status);
2434 dev_dbg(&port->dev, "DCR2 Writing success status%d\n", status);
2436 /* write values in clkstart0x0 and clkmulti 0x20 */
2438 status = mos7840_set_reg_sync(port, CLK_START_VALUE_REGISTER, Data);
2440 dev_dbg(&port->dev, "Writing CLK_START_VALUE_REGISTER failed status-0x%x\n", status);
2443 dev_dbg(&port->dev, "CLK_START_VALUE_REGISTER Writing success status%d\n", status);
2446 status = mos7840_set_reg_sync(port, CLK_MULTI_REGISTER, Data);
2448 dev_dbg(&port->dev, "Writing CLK_MULTI_REGISTER failed status-0x%x\n", status);
2451 dev_dbg(&port->dev, "CLK_MULTI_REGISTER Writing success status%d\n", status);
2453 /* write value 0x0 to scratchpad register */
2455 status = mos7840_set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
2457 dev_dbg(&port->dev, "Writing SCRATCH_PAD_REGISTER failed status-0x%x\n", status);
2460 dev_dbg(&port->dev, "SCRATCH_PAD_REGISTER Writing success status%d\n", status);
2462 /* Zero Length flag register */
2463 if ((mos7840_port->port_num != 1) && (serial->num_ports == 2)) {
2465 status = mos7840_set_reg_sync(port,
2467 ((__u16)mos7840_port->port_num)), Data);
2468 dev_dbg(&port->dev, "ZLIP offset %x\n",
2469 (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num)));
2471 dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 2, status);
2474 dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 2, status);
2477 status = mos7840_set_reg_sync(port,
2479 ((__u16)mos7840_port->port_num) - 0x1), Data);
2480 dev_dbg(&port->dev, "ZLIP offset %x\n",
2481 (__u16)(ZLP_REG1 + ((__u16) mos7840_port->port_num) - 0x1));
2483 dev_dbg(&port->dev, "Writing ZLP_REG%d failed status-0x%x\n", pnum + 1, status);
2486 dev_dbg(&port->dev, "ZLP_REG%d Writing success status%d\n", pnum + 1, status);
2489 mos7840_port->control_urb = usb_alloc_urb(0, GFP_KERNEL);
2490 mos7840_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
2491 mos7840_port->dr = kmalloc(sizeof(struct usb_ctrlrequest),
2493 if (!mos7840_port->control_urb || !mos7840_port->ctrl_buf ||
2494 !mos7840_port->dr) {
2499 mos7840_port->has_led = false;
2501 /* Initialize LED timers */
2502 if (device_type == MOSCHIP_DEVICE_ID_7810) {
2503 mos7840_port->has_led = true;
2505 init_timer(&mos7840_port->led_timer1);
2506 mos7840_port->led_timer1.function = mos7840_led_off;
2507 mos7840_port->led_timer1.expires =
2508 jiffies + msecs_to_jiffies(LED_ON_MS);
2509 mos7840_port->led_timer1.data = (unsigned long)mos7840_port;
2511 init_timer(&mos7840_port->led_timer2);
2512 mos7840_port->led_timer2.function = mos7840_led_flag_off;
2513 mos7840_port->led_timer2.expires =
2514 jiffies + msecs_to_jiffies(LED_OFF_MS);
2515 mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
2517 mos7840_port->led_flag = false;
2520 mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
2523 if (pnum == serial->num_ports - 1) {
2524 /* Zero Length flag enable */
2526 status = mos7840_set_reg_sync(serial->port[0], ZLP_REG5, Data);
2528 dev_dbg(&port->dev, "Writing ZLP_REG5 failed status-0x%x\n", status);
2531 dev_dbg(&port->dev, "ZLP_REG5 Writing success status%d\n", status);
2533 /* setting configuration feature to one */
2534 usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
2535 0x03, 0x00, 0x01, 0x00, NULL, 0x00,
2540 kfree(mos7840_port->dr);
2541 kfree(mos7840_port->ctrl_buf);
2542 usb_free_urb(mos7840_port->control_urb);
2543 kfree(mos7840_port);
2548 static int mos7840_port_remove(struct usb_serial_port *port)
2550 struct moschip_port *mos7840_port;
2552 mos7840_port = mos7840_get_port_private(port);
2554 if (mos7840_port->has_led) {
2556 mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
2558 del_timer_sync(&mos7840_port->led_timer1);
2559 del_timer_sync(&mos7840_port->led_timer2);
2561 usb_kill_urb(mos7840_port->control_urb);
2562 usb_free_urb(mos7840_port->control_urb);
2563 kfree(mos7840_port->ctrl_buf);
2564 kfree(mos7840_port->dr);
2565 kfree(mos7840_port);
2570 static struct usb_serial_driver moschip7840_4port_device = {
2572 .owner = THIS_MODULE,
2575 .description = DRIVER_DESC,
2576 .id_table = id_table,
2578 .open = mos7840_open,
2579 .close = mos7840_close,
2580 .write = mos7840_write,
2581 .write_room = mos7840_write_room,
2582 .chars_in_buffer = mos7840_chars_in_buffer,
2583 .throttle = mos7840_throttle,
2584 .unthrottle = mos7840_unthrottle,
2585 .calc_num_ports = mos7840_calc_num_ports,
2586 #ifdef MCSSerialProbe
2587 .probe = mos7840_serial_probe,
2589 .ioctl = mos7840_ioctl,
2590 .set_termios = mos7840_set_termios,
2591 .break_ctl = mos7840_break,
2592 .tiocmget = mos7840_tiocmget,
2593 .tiocmset = mos7840_tiocmset,
2594 .get_icount = mos7840_get_icount,
2595 .port_probe = mos7840_port_probe,
2596 .port_remove = mos7840_port_remove,
2597 .read_bulk_callback = mos7840_bulk_in_callback,
2598 .read_int_callback = mos7840_interrupt_callback,
2601 static struct usb_serial_driver * const serial_drivers[] = {
2602 &moschip7840_4port_device, NULL
2605 module_usb_serial_driver(serial_drivers, id_table);
2607 MODULE_DESCRIPTION(DRIVER_DESC);
2608 MODULE_LICENSE("GPL");