1 /* $Id: aty128fb.c,v 1.1.1.1.36.1 1999/12/11 09:03:05 Exp $
2 * linux/drivers/video/aty128fb.c -- Frame buffer device for ATI Rage128
4 * Copyright (C) 1999-2003, Brad Douglas <brad@neruo.com>
5 * Copyright (C) 1999, Anthony Tong <atong@uiuc.edu>
7 * Ani Joshi / Jeff Garzik
10 * Michel Danzer <michdaen@iiic.ethz.ch>
14 * Benjamin Herrenschmidt
15 * - pmac-specific PM stuff
16 * - various fixes & cleanups
18 * Andreas Hundt <andi@convergence.de>
21 * Paul Mackerras <paulus@samba.org>
22 * - Convert to new framebuffer API,
23 * fix colormap setting at 16 bits/pixel (565)
28 * Jon Smirl <jonsmirl@yahoo.com>
30 * - replace ROM BIOS search
32 * Based off of Geert's atyfb.c and vfb.c.
35 * - monitor sensing (DDC)
37 * - other platform support (only ppc/x86 supported)
38 * - hardware cursor support
40 * Please cc: your patches to brad@neruo.com.
44 * A special note of gratitude to ATI's devrel for providing documentation,
45 * example code and hardware. Thanks Nitya. -atong and brad
49 #include <linux/module.h>
50 #include <linux/moduleparam.h>
51 #include <linux/kernel.h>
52 #include <linux/errno.h>
53 #include <linux/string.h>
55 #include <linux/vmalloc.h>
56 #include <linux/delay.h>
57 #include <linux/interrupt.h>
58 #include <linux/uaccess.h>
60 #include <linux/init.h>
61 #include <linux/pci.h>
62 #include <linux/ioport.h>
63 #include <linux/console.h>
64 #include <linux/backlight.h>
67 #ifdef CONFIG_PPC_PMAC
68 #include <asm/machdep.h>
69 #include <asm/pmac_feature.h>
71 #include <asm/pci-bridge.h>
72 #include "../macmodes.h"
75 #ifdef CONFIG_PMAC_BACKLIGHT
76 #include <asm/backlight.h>
79 #ifdef CONFIG_BOOTX_TEXT
80 #include <asm/btext.h>
81 #endif /* CONFIG_BOOTX_TEXT */
87 #include <video/aty128.h>
93 #define DBG(fmt, args...) printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args);
95 #define DBG(fmt, args...)
98 #ifndef CONFIG_PPC_PMAC
100 static struct fb_var_screeninfo default_var __devinitdata = {
101 /* 640x480, 60 Hz, Non-Interlaced (25.175 MHz dotclock) */
102 640, 480, 640, 480, 0, 0, 8, 0,
103 {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
104 0, 0, -1, -1, 0, 39722, 48, 16, 33, 10, 96, 2,
105 0, FB_VMODE_NONINTERLACED
108 #else /* CONFIG_PPC_PMAC */
109 /* default to 1024x768 at 75Hz on PPC - this will work
110 * on the iMac, the usual 640x480 @ 60Hz doesn't. */
111 static struct fb_var_screeninfo default_var = {
112 /* 1024x768, 75 Hz, Non-Interlaced (78.75 MHz dotclock) */
113 1024, 768, 1024, 768, 0, 0, 8, 0,
114 {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0},
115 0, 0, -1, -1, 0, 12699, 160, 32, 28, 1, 96, 3,
116 FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
117 FB_VMODE_NONINTERLACED
119 #endif /* CONFIG_PPC_PMAC */
121 /* default modedb mode */
122 /* 640x480, 60 Hz, Non-Interlaced (25.172 MHz dotclock) */
123 static struct fb_videomode defaultmode __devinitdata = {
135 .vmode = FB_VMODE_NONINTERLACED
138 /* Chip generations */
150 /* Must match above enum */
151 static const char *r128_family[] __devinitdata = {
163 * PCI driver prototypes
165 static int aty128_probe(struct pci_dev *pdev,
166 const struct pci_device_id *ent);
167 static void aty128_remove(struct pci_dev *pdev);
168 static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state);
169 static int aty128_pci_resume(struct pci_dev *pdev);
170 static int aty128_do_resume(struct pci_dev *pdev);
172 /* supported Rage128 chipsets */
173 static struct pci_device_id aty128_pci_tbl[] = {
174 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LE,
175 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3_pci },
176 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_LF,
177 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M3 },
178 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_MF,
179 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 },
180 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_ML,
181 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_M4 },
182 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PA,
183 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
184 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PB,
185 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
186 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PC,
187 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
188 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PD,
189 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
190 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PE,
191 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
192 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PF,
193 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
194 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PG,
195 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
196 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PH,
197 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
198 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PI,
199 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
200 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PJ,
201 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
202 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PK,
203 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
204 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PL,
205 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
206 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PM,
207 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
208 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PN,
209 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
210 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PO,
211 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
212 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PP,
213 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
214 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PQ,
215 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
216 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PR,
217 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro_pci },
218 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PS,
219 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
220 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PT,
221 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
222 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PU,
223 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
224 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PV,
225 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
226 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PW,
227 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
228 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_PX,
229 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pro },
230 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RE,
231 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
232 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RF,
233 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
234 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RG,
235 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
236 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RK,
237 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
238 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_RL,
239 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
240 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SE,
241 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
242 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SF,
243 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_pci },
244 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SG,
245 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
246 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SH,
247 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
248 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SK,
249 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
250 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SL,
251 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
252 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SM,
253 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
254 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_SN,
255 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128 },
256 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TF,
257 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
258 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TL,
259 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
260 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TR,
261 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
262 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TS,
263 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
264 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TT,
265 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
266 { PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RAGE128_TU,
267 PCI_ANY_ID, PCI_ANY_ID, 0, 0, rage_128_ultra },
271 MODULE_DEVICE_TABLE(pci, aty128_pci_tbl);
273 static struct pci_driver aty128fb_driver = {
275 .id_table = aty128_pci_tbl,
276 .probe = aty128_probe,
277 .remove = __devexit_p(aty128_remove),
278 .suspend = aty128_pci_suspend,
279 .resume = aty128_pci_resume,
282 /* packed BIOS settings */
287 u8 accelerator_entry;
289 u16 VGA_table_offset;
290 u16 POST_table_offset;
296 u16 PCLK_ref_divider;
300 u16 MCLK_ref_divider;
304 u16 XCLK_ref_divider;
307 } __attribute__ ((packed)) PLL_BLOCK;
308 #endif /* !CONFIG_PPC */
310 /* onboard memory information */
311 struct aty128_meminfo {
325 /* various memory configurations */
326 static const struct aty128_meminfo sdr_128 =
327 { 4, 4, 3, 3, 1, 3, 1, 16, 30, 16, "128-bit SDR SGRAM (1:1)" };
328 static const struct aty128_meminfo sdr_64 =
329 { 4, 8, 3, 3, 1, 3, 1, 17, 46, 17, "64-bit SDR SGRAM (1:1)" };
330 static const struct aty128_meminfo sdr_sgram =
331 { 4, 4, 1, 2, 1, 2, 1, 16, 24, 16, "64-bit SDR SGRAM (2:1)" };
332 static const struct aty128_meminfo ddr_sgram =
333 { 4, 4, 3, 3, 2, 3, 1, 16, 31, 16, "64-bit DDR SGRAM" };
335 static struct fb_fix_screeninfo aty128fb_fix __devinitdata = {
337 .type = FB_TYPE_PACKED_PIXELS,
338 .visual = FB_VISUAL_PSEUDOCOLOR,
342 .accel = FB_ACCEL_ATI_RAGE128,
345 static char *mode_option __devinitdata = NULL;
347 #ifdef CONFIG_PPC_PMAC
348 static int default_vmode __devinitdata = VMODE_1024_768_60;
349 static int default_cmode __devinitdata = CMODE_8;
352 static int default_crt_on __devinitdata = 0;
353 static int default_lcd_on __devinitdata = 1;
356 static bool mtrr = true;
359 #ifdef CONFIG_PMAC_BACKLIGHT
360 static int backlight __devinitdata = 1;
362 static int backlight __devinitdata = 0;
366 struct aty128_constants {
378 u32 h_total, h_sync_strt_wid;
379 u32 v_total, v_sync_strt_wid;
381 u32 offset, offset_cntl;
382 u32 xoffset, yoffset;
389 u32 feedback_divider;
393 struct aty128_ddafifo {
398 /* register values for a specific mode */
399 struct aty128fb_par {
400 struct aty128_crtc crtc;
401 struct aty128_pll pll;
402 struct aty128_ddafifo fifo_reg;
404 struct aty128_constants constants; /* PLL and others */
405 void __iomem *regbase; /* remapped mmio */
406 u32 vram_size; /* onboard video ram */
408 const struct aty128_meminfo *mem; /* onboard mem info */
410 struct { int vram; int vram_valid; } mtrr;
412 int blitter_may_be_busy;
413 int fifo_slots; /* free slots in FIFO (64 max) */
417 struct pci_dev *pdev;
418 struct fb_info *next;
422 u8 red[32]; /* see aty128fb_setcolreg */
425 u32 pseudo_palette[16]; /* used for TRUECOLOR */
429 #define round_div(n, d) ((n+(d/2))/d)
431 static int aty128fb_check_var(struct fb_var_screeninfo *var,
432 struct fb_info *info);
433 static int aty128fb_set_par(struct fb_info *info);
434 static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
435 u_int transp, struct fb_info *info);
436 static int aty128fb_pan_display(struct fb_var_screeninfo *var,
438 static int aty128fb_blank(int blank, struct fb_info *fb);
439 static int aty128fb_ioctl(struct fb_info *info, u_int cmd, unsigned long arg);
440 static int aty128fb_sync(struct fb_info *info);
446 static int aty128_encode_var(struct fb_var_screeninfo *var,
447 const struct aty128fb_par *par);
448 static int aty128_decode_var(struct fb_var_screeninfo *var,
449 struct aty128fb_par *par);
451 static void __devinit aty128_get_pllinfo(struct aty128fb_par *par,
453 static void __devinit __iomem *aty128_map_ROM(struct pci_dev *pdev, const struct aty128fb_par *par);
455 static void aty128_timings(struct aty128fb_par *par);
456 static void aty128_init_engine(struct aty128fb_par *par);
457 static void aty128_reset_engine(const struct aty128fb_par *par);
458 static void aty128_flush_pixel_cache(const struct aty128fb_par *par);
459 static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par);
460 static void wait_for_fifo(u16 entries, struct aty128fb_par *par);
461 static void wait_for_idle(struct aty128fb_par *par);
462 static u32 depth_to_dst(u32 depth);
464 #ifdef CONFIG_FB_ATY128_BACKLIGHT
465 static void aty128_bl_set_power(struct fb_info *info, int power);
468 #define BIOS_IN8(v) (readb(bios + (v)))
469 #define BIOS_IN16(v) (readb(bios + (v)) | \
470 (readb(bios + (v) + 1) << 8))
471 #define BIOS_IN32(v) (readb(bios + (v)) | \
472 (readb(bios + (v) + 1) << 8) | \
473 (readb(bios + (v) + 2) << 16) | \
474 (readb(bios + (v) + 3) << 24))
477 static struct fb_ops aty128fb_ops = {
478 .owner = THIS_MODULE,
479 .fb_check_var = aty128fb_check_var,
480 .fb_set_par = aty128fb_set_par,
481 .fb_setcolreg = aty128fb_setcolreg,
482 .fb_pan_display = aty128fb_pan_display,
483 .fb_blank = aty128fb_blank,
484 .fb_ioctl = aty128fb_ioctl,
485 .fb_sync = aty128fb_sync,
486 .fb_fillrect = cfb_fillrect,
487 .fb_copyarea = cfb_copyarea,
488 .fb_imageblit = cfb_imageblit,
492 * Functions to read from/write to the mmio registers
493 * - endian conversions may possibly be avoided by
494 * using the other register aperture. TODO.
496 static inline u32 _aty_ld_le32(volatile unsigned int regindex,
497 const struct aty128fb_par *par)
499 return readl (par->regbase + regindex);
502 static inline void _aty_st_le32(volatile unsigned int regindex, u32 val,
503 const struct aty128fb_par *par)
505 writel (val, par->regbase + regindex);
508 static inline u8 _aty_ld_8(unsigned int regindex,
509 const struct aty128fb_par *par)
511 return readb (par->regbase + regindex);
514 static inline void _aty_st_8(unsigned int regindex, u8 val,
515 const struct aty128fb_par *par)
517 writeb (val, par->regbase + regindex);
520 #define aty_ld_le32(regindex) _aty_ld_le32(regindex, par)
521 #define aty_st_le32(regindex, val) _aty_st_le32(regindex, val, par)
522 #define aty_ld_8(regindex) _aty_ld_8(regindex, par)
523 #define aty_st_8(regindex, val) _aty_st_8(regindex, val, par)
526 * Functions to read from/write to the pll registers
529 #define aty_ld_pll(pll_index) _aty_ld_pll(pll_index, par)
530 #define aty_st_pll(pll_index, val) _aty_st_pll(pll_index, val, par)
533 static u32 _aty_ld_pll(unsigned int pll_index,
534 const struct aty128fb_par *par)
536 aty_st_8(CLOCK_CNTL_INDEX, pll_index & 0x3F);
537 return aty_ld_le32(CLOCK_CNTL_DATA);
541 static void _aty_st_pll(unsigned int pll_index, u32 val,
542 const struct aty128fb_par *par)
544 aty_st_8(CLOCK_CNTL_INDEX, (pll_index & 0x3F) | PLL_WR_EN);
545 aty_st_le32(CLOCK_CNTL_DATA, val);
549 /* return true when the PLL has completed an atomic update */
550 static int aty_pll_readupdate(const struct aty128fb_par *par)
552 return !(aty_ld_pll(PPLL_REF_DIV) & PPLL_ATOMIC_UPDATE_R);
556 static void aty_pll_wait_readupdate(const struct aty128fb_par *par)
558 unsigned long timeout = jiffies + HZ/100; // should be more than enough
561 while (time_before(jiffies, timeout))
562 if (aty_pll_readupdate(par)) {
567 if (reset) /* reset engine?? */
568 printk(KERN_DEBUG "aty128fb: PLL write timeout!\n");
572 /* tell PLL to update */
573 static void aty_pll_writeupdate(const struct aty128fb_par *par)
575 aty_pll_wait_readupdate(par);
577 aty_st_pll(PPLL_REF_DIV,
578 aty_ld_pll(PPLL_REF_DIV) | PPLL_ATOMIC_UPDATE_W);
582 /* write to the scratch register to test r/w functionality */
583 static int __devinit register_test(const struct aty128fb_par *par)
588 val = aty_ld_le32(BIOS_0_SCRATCH);
590 aty_st_le32(BIOS_0_SCRATCH, 0x55555555);
591 if (aty_ld_le32(BIOS_0_SCRATCH) == 0x55555555) {
592 aty_st_le32(BIOS_0_SCRATCH, 0xAAAAAAAA);
594 if (aty_ld_le32(BIOS_0_SCRATCH) == 0xAAAAAAAA)
598 aty_st_le32(BIOS_0_SCRATCH, val); // restore value
604 * Accelerator engine functions
606 static void do_wait_for_fifo(u16 entries, struct aty128fb_par *par)
611 for (i = 0; i < 2000000; i++) {
612 par->fifo_slots = aty_ld_le32(GUI_STAT) & 0x0fff;
613 if (par->fifo_slots >= entries)
616 aty128_reset_engine(par);
621 static void wait_for_idle(struct aty128fb_par *par)
625 do_wait_for_fifo(64, par);
628 for (i = 0; i < 2000000; i++) {
629 if (!(aty_ld_le32(GUI_STAT) & (1 << 31))) {
630 aty128_flush_pixel_cache(par);
631 par->blitter_may_be_busy = 0;
635 aty128_reset_engine(par);
640 static void wait_for_fifo(u16 entries, struct aty128fb_par *par)
642 if (par->fifo_slots < entries)
643 do_wait_for_fifo(64, par);
644 par->fifo_slots -= entries;
648 static void aty128_flush_pixel_cache(const struct aty128fb_par *par)
653 tmp = aty_ld_le32(PC_NGUI_CTLSTAT);
656 aty_st_le32(PC_NGUI_CTLSTAT, tmp);
658 for (i = 0; i < 2000000; i++)
659 if (!(aty_ld_le32(PC_NGUI_CTLSTAT) & PC_BUSY))
664 static void aty128_reset_engine(const struct aty128fb_par *par)
666 u32 gen_reset_cntl, clock_cntl_index, mclk_cntl;
668 aty128_flush_pixel_cache(par);
670 clock_cntl_index = aty_ld_le32(CLOCK_CNTL_INDEX);
671 mclk_cntl = aty_ld_pll(MCLK_CNTL);
673 aty_st_pll(MCLK_CNTL, mclk_cntl | 0x00030000);
675 gen_reset_cntl = aty_ld_le32(GEN_RESET_CNTL);
676 aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl | SOFT_RESET_GUI);
677 aty_ld_le32(GEN_RESET_CNTL);
678 aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl & ~(SOFT_RESET_GUI));
679 aty_ld_le32(GEN_RESET_CNTL);
681 aty_st_pll(MCLK_CNTL, mclk_cntl);
682 aty_st_le32(CLOCK_CNTL_INDEX, clock_cntl_index);
683 aty_st_le32(GEN_RESET_CNTL, gen_reset_cntl);
685 /* use old pio mode */
686 aty_st_le32(PM4_BUFFER_CNTL, PM4_BUFFER_CNTL_NONPM4);
692 static void aty128_init_engine(struct aty128fb_par *par)
698 /* 3D scaler not spoken here */
699 wait_for_fifo(1, par);
700 aty_st_le32(SCALE_3D_CNTL, 0x00000000);
702 aty128_reset_engine(par);
704 pitch_value = par->crtc.pitch;
705 if (par->crtc.bpp == 24) {
706 pitch_value = pitch_value * 3;
709 wait_for_fifo(4, par);
710 /* setup engine offset registers */
711 aty_st_le32(DEFAULT_OFFSET, 0x00000000);
713 /* setup engine pitch registers */
714 aty_st_le32(DEFAULT_PITCH, pitch_value);
716 /* set the default scissor register to max dimensions */
717 aty_st_le32(DEFAULT_SC_BOTTOM_RIGHT, (0x1FFF << 16) | 0x1FFF);
719 /* set the drawing controls registers */
720 aty_st_le32(DP_GUI_MASTER_CNTL,
721 GMC_SRC_PITCH_OFFSET_DEFAULT |
722 GMC_DST_PITCH_OFFSET_DEFAULT |
723 GMC_SRC_CLIP_DEFAULT |
724 GMC_DST_CLIP_DEFAULT |
725 GMC_BRUSH_SOLIDCOLOR |
726 (depth_to_dst(par->crtc.depth) << 8) |
728 GMC_BYTE_ORDER_MSB_TO_LSB |
729 GMC_DP_CONVERSION_TEMP_6500 |
733 GMC_DST_CLR_CMP_FCN_CLEAR |
737 wait_for_fifo(8, par);
738 /* clear the line drawing registers */
739 aty_st_le32(DST_BRES_ERR, 0);
740 aty_st_le32(DST_BRES_INC, 0);
741 aty_st_le32(DST_BRES_DEC, 0);
743 /* set brush color registers */
744 aty_st_le32(DP_BRUSH_FRGD_CLR, 0xFFFFFFFF); /* white */
745 aty_st_le32(DP_BRUSH_BKGD_CLR, 0x00000000); /* black */
747 /* set source color registers */
748 aty_st_le32(DP_SRC_FRGD_CLR, 0xFFFFFFFF); /* white */
749 aty_st_le32(DP_SRC_BKGD_CLR, 0x00000000); /* black */
751 /* default write mask */
752 aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF);
754 /* Wait for all the writes to be completed before returning */
759 /* convert depth values to their register representation */
760 static u32 depth_to_dst(u32 depth)
764 else if (depth <= 15)
766 else if (depth == 16)
768 else if (depth <= 24)
770 else if (depth <= 32)
777 * PLL informations retreival
782 static void __iomem * __devinit aty128_map_ROM(const struct aty128fb_par *par, struct pci_dev *dev)
789 /* Fix from ATI for problem with Rage128 hardware not leaving ROM enabled */
791 temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG);
794 aty_st_le32(RAGE128_MPP_TB_CONFIG, temp);
795 temp = aty_ld_le32(RAGE128_MPP_TB_CONFIG);
797 bios = pci_map_rom(dev, &rom_size);
800 printk(KERN_ERR "aty128fb: ROM failed to map\n");
804 /* Very simple test to make sure it appeared */
805 if (BIOS_IN16(0) != 0xaa55) {
806 printk(KERN_DEBUG "aty128fb: Invalid ROM signature %x should "
807 " be 0xaa55\n", BIOS_IN16(0));
811 /* Look for the PCI data to check the ROM type */
812 dptr = BIOS_IN16(0x18);
814 /* Check the PCI data signature. If it's wrong, we still assume a normal x86 ROM
815 * for now, until I've verified this works everywhere. The goal here is more
816 * to phase out Open Firmware images.
818 * Currently, we only look at the first PCI data, we could iteratre and deal with
819 * them all, and we should use fb_bios_start relative to start of image and not
820 * relative start of ROM, but so far, I never found a dual-image ATI card
823 * u32 signature; + 0x00
826 * u16 reserved_1; + 0x08
828 * u8 drevision; + 0x0c
829 * u8 class_hi; + 0x0d
830 * u16 class_lo; + 0x0e
832 * u16 irevision; + 0x12
834 * u8 indicator; + 0x15
835 * u16 reserved_2; + 0x16
838 if (BIOS_IN32(dptr) != (('R' << 24) | ('I' << 16) | ('C' << 8) | 'P')) {
839 printk(KERN_WARNING "aty128fb: PCI DATA signature in ROM incorrect: %08x\n",
843 rom_type = BIOS_IN8(dptr + 0x14);
846 printk(KERN_INFO "aty128fb: Found Intel x86 BIOS ROM Image\n");
849 printk(KERN_INFO "aty128fb: Found Open Firmware ROM Image\n");
852 printk(KERN_INFO "aty128fb: Found HP PA-RISC ROM Image\n");
855 printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n", rom_type);
862 pci_unmap_rom(dev, bios);
866 static void __devinit aty128_get_pllinfo(struct aty128fb_par *par, unsigned char __iomem *bios)
868 unsigned int bios_hdr;
869 unsigned int bios_pll;
871 bios_hdr = BIOS_IN16(0x48);
872 bios_pll = BIOS_IN16(bios_hdr + 0x30);
874 par->constants.ppll_max = BIOS_IN32(bios_pll + 0x16);
875 par->constants.ppll_min = BIOS_IN32(bios_pll + 0x12);
876 par->constants.xclk = BIOS_IN16(bios_pll + 0x08);
877 par->constants.ref_divider = BIOS_IN16(bios_pll + 0x10);
878 par->constants.ref_clk = BIOS_IN16(bios_pll + 0x0e);
880 DBG("ppll_max %d ppll_min %d xclk %d ref_divider %d ref clock %d\n",
881 par->constants.ppll_max, par->constants.ppll_min,
882 par->constants.xclk, par->constants.ref_divider,
883 par->constants.ref_clk);
888 static void __iomem * __devinit aty128_find_mem_vbios(struct aty128fb_par *par)
890 /* I simplified this code as we used to miss the signatures in
891 * a lot of case. It's now closer to XFree, we just don't check
892 * for signatures at all... Something better will have to be done
893 * if we end up having conflicts
896 unsigned char __iomem *rom_base = NULL;
898 for (segstart=0x000c0000; segstart<0x000f0000; segstart+=0x00001000) {
899 rom_base = ioremap(segstart, 0x10000);
900 if (rom_base == NULL)
902 if (readb(rom_base) == 0x55 && readb(rom_base + 1) == 0xaa)
910 #endif /* ndef(__sparc__) */
912 /* fill in known card constants if pll_block is not available */
913 static void __devinit aty128_timings(struct aty128fb_par *par)
916 /* instead of a table lookup, assume OF has properly
917 * setup the PLL registers and use their values
918 * to set the XCLK values and reference divider values */
920 u32 x_mpll_ref_fb_div;
923 unsigned PostDivSet[] = { 0, 1, 2, 4, 8, 3, 6, 12 };
926 if (!par->constants.ref_clk)
927 par->constants.ref_clk = 2950;
930 x_mpll_ref_fb_div = aty_ld_pll(X_MPLL_REF_FB_DIV);
931 xclk_cntl = aty_ld_pll(XCLK_CNTL) & 0x7;
932 Nx = (x_mpll_ref_fb_div & 0x00ff00) >> 8;
933 M = x_mpll_ref_fb_div & 0x0000ff;
935 par->constants.xclk = round_div((2 * Nx * par->constants.ref_clk),
936 (M * PostDivSet[xclk_cntl]));
938 par->constants.ref_divider =
939 aty_ld_pll(PPLL_REF_DIV) & PPLL_REF_DIV_MASK;
942 if (!par->constants.ref_divider) {
943 par->constants.ref_divider = 0x3b;
945 aty_st_pll(X_MPLL_REF_FB_DIV, 0x004c4c1e);
946 aty_pll_writeupdate(par);
948 aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider);
949 aty_pll_writeupdate(par);
951 /* from documentation */
952 if (!par->constants.ppll_min)
953 par->constants.ppll_min = 12500;
954 if (!par->constants.ppll_max)
955 par->constants.ppll_max = 25000; /* 23000 on some cards? */
956 if (!par->constants.xclk)
957 par->constants.xclk = 0x1d4d; /* same as mclk */
959 par->constants.fifo_width = 128;
960 par->constants.fifo_depth = 32;
962 switch (aty_ld_le32(MEM_CNTL) & 0x3) {
967 par->mem = &sdr_sgram;
970 par->mem = &ddr_sgram;
973 par->mem = &sdr_sgram;
983 /* Program the CRTC registers */
984 static void aty128_set_crtc(const struct aty128_crtc *crtc,
985 const struct aty128fb_par *par)
987 aty_st_le32(CRTC_GEN_CNTL, crtc->gen_cntl);
988 aty_st_le32(CRTC_H_TOTAL_DISP, crtc->h_total);
989 aty_st_le32(CRTC_H_SYNC_STRT_WID, crtc->h_sync_strt_wid);
990 aty_st_le32(CRTC_V_TOTAL_DISP, crtc->v_total);
991 aty_st_le32(CRTC_V_SYNC_STRT_WID, crtc->v_sync_strt_wid);
992 aty_st_le32(CRTC_PITCH, crtc->pitch);
993 aty_st_le32(CRTC_OFFSET, crtc->offset);
994 aty_st_le32(CRTC_OFFSET_CNTL, crtc->offset_cntl);
995 /* Disable ATOMIC updating. Is this the right place? */
996 aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~(0x00030000));
1000 static int aty128_var_to_crtc(const struct fb_var_screeninfo *var,
1001 struct aty128_crtc *crtc,
1002 const struct aty128fb_par *par)
1004 u32 xres, yres, vxres, vyres, xoffset, yoffset, bpp, dst;
1005 u32 left, right, upper, lower, hslen, vslen, sync, vmode;
1006 u32 h_total, h_disp, h_sync_strt, h_sync_wid, h_sync_pol;
1007 u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync;
1009 u8 mode_bytpp[7] = { 0, 0, 1, 2, 2, 3, 4 };
1014 vxres = var->xres_virtual;
1015 vyres = var->yres_virtual;
1016 xoffset = var->xoffset;
1017 yoffset = var->yoffset;
1018 bpp = var->bits_per_pixel;
1019 left = var->left_margin;
1020 right = var->right_margin;
1021 upper = var->upper_margin;
1022 lower = var->lower_margin;
1023 hslen = var->hsync_len;
1024 vslen = var->vsync_len;
1031 depth = (var->green.length == 6) ? 16 : 15;
1033 /* check for mode eligibility
1034 * accept only non interlaced modes */
1035 if ((vmode & FB_VMODE_MASK) != FB_VMODE_NONINTERLACED)
1038 /* convert (and round up) and validate */
1039 xres = (xres + 7) & ~7;
1040 xoffset = (xoffset + 7) & ~7;
1042 if (vxres < xres + xoffset)
1043 vxres = xres + xoffset;
1045 if (vyres < yres + yoffset)
1046 vyres = yres + yoffset;
1048 /* convert depth into ATI register depth */
1049 dst = depth_to_dst(depth);
1051 if (dst == -EINVAL) {
1052 printk(KERN_ERR "aty128fb: Invalid depth or RGBA\n");
1056 /* convert register depth to bytes per pixel */
1057 bytpp = mode_bytpp[dst];
1059 /* make sure there is enough video ram for the mode */
1060 if ((u32)(vxres * vyres * bytpp) > par->vram_size) {
1061 printk(KERN_ERR "aty128fb: Not enough memory for mode\n");
1065 h_disp = (xres >> 3) - 1;
1066 h_total = (((xres + right + hslen + left) >> 3) - 1) & 0xFFFFL;
1069 v_total = (yres + upper + vslen + lower - 1) & 0xFFFFL;
1071 /* check to make sure h_total and v_total are in range */
1072 if (((h_total >> 3) - 1) > 0x1ff || (v_total - 1) > 0x7FF) {
1073 printk(KERN_ERR "aty128fb: invalid width ranges\n");
1077 h_sync_wid = (hslen + 7) >> 3;
1078 if (h_sync_wid == 0)
1080 else if (h_sync_wid > 0x3f) /* 0x3f = max hwidth */
1083 h_sync_strt = (h_disp << 3) + right;
1086 if (v_sync_wid == 0)
1088 else if (v_sync_wid > 0x1f) /* 0x1f = max vwidth */
1091 v_sync_strt = v_disp + lower;
1093 h_sync_pol = sync & FB_SYNC_HOR_HIGH_ACT ? 0 : 1;
1094 v_sync_pol = sync & FB_SYNC_VERT_HIGH_ACT ? 0 : 1;
1096 c_sync = sync & FB_SYNC_COMP_HIGH_ACT ? (1 << 4) : 0;
1098 crtc->gen_cntl = 0x3000000L | c_sync | (dst << 8);
1100 crtc->h_total = h_total | (h_disp << 16);
1101 crtc->v_total = v_total | (v_disp << 16);
1103 crtc->h_sync_strt_wid = h_sync_strt | (h_sync_wid << 16) |
1105 crtc->v_sync_strt_wid = v_sync_strt | (v_sync_wid << 16) |
1108 crtc->pitch = vxres >> 3;
1112 if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW)
1113 crtc->offset_cntl = 0x00010000;
1115 crtc->offset_cntl = 0;
1117 crtc->vxres = vxres;
1118 crtc->vyres = vyres;
1119 crtc->xoffset = xoffset;
1120 crtc->yoffset = yoffset;
1121 crtc->depth = depth;
1128 static int aty128_pix_width_to_var(int pix_width, struct fb_var_screeninfo *var)
1131 /* fill in pixel info */
1132 var->red.msb_right = 0;
1133 var->green.msb_right = 0;
1134 var->blue.offset = 0;
1135 var->blue.msb_right = 0;
1136 var->transp.offset = 0;
1137 var->transp.length = 0;
1138 var->transp.msb_right = 0;
1139 switch (pix_width) {
1140 case CRTC_PIX_WIDTH_8BPP:
1141 var->bits_per_pixel = 8;
1142 var->red.offset = 0;
1143 var->red.length = 8;
1144 var->green.offset = 0;
1145 var->green.length = 8;
1146 var->blue.length = 8;
1148 case CRTC_PIX_WIDTH_15BPP:
1149 var->bits_per_pixel = 16;
1150 var->red.offset = 10;
1151 var->red.length = 5;
1152 var->green.offset = 5;
1153 var->green.length = 5;
1154 var->blue.length = 5;
1156 case CRTC_PIX_WIDTH_16BPP:
1157 var->bits_per_pixel = 16;
1158 var->red.offset = 11;
1159 var->red.length = 5;
1160 var->green.offset = 5;
1161 var->green.length = 6;
1162 var->blue.length = 5;
1164 case CRTC_PIX_WIDTH_24BPP:
1165 var->bits_per_pixel = 24;
1166 var->red.offset = 16;
1167 var->red.length = 8;
1168 var->green.offset = 8;
1169 var->green.length = 8;
1170 var->blue.length = 8;
1172 case CRTC_PIX_WIDTH_32BPP:
1173 var->bits_per_pixel = 32;
1174 var->red.offset = 16;
1175 var->red.length = 8;
1176 var->green.offset = 8;
1177 var->green.length = 8;
1178 var->blue.length = 8;
1179 var->transp.offset = 24;
1180 var->transp.length = 8;
1183 printk(KERN_ERR "aty128fb: Invalid pixel width\n");
1191 static int aty128_crtc_to_var(const struct aty128_crtc *crtc,
1192 struct fb_var_screeninfo *var)
1194 u32 xres, yres, left, right, upper, lower, hslen, vslen, sync;
1195 u32 h_total, h_disp, h_sync_strt, h_sync_dly, h_sync_wid, h_sync_pol;
1196 u32 v_total, v_disp, v_sync_strt, v_sync_wid, v_sync_pol, c_sync;
1199 /* fun with masking */
1200 h_total = crtc->h_total & 0x1ff;
1201 h_disp = (crtc->h_total >> 16) & 0xff;
1202 h_sync_strt = (crtc->h_sync_strt_wid >> 3) & 0x1ff;
1203 h_sync_dly = crtc->h_sync_strt_wid & 0x7;
1204 h_sync_wid = (crtc->h_sync_strt_wid >> 16) & 0x3f;
1205 h_sync_pol = (crtc->h_sync_strt_wid >> 23) & 0x1;
1206 v_total = crtc->v_total & 0x7ff;
1207 v_disp = (crtc->v_total >> 16) & 0x7ff;
1208 v_sync_strt = crtc->v_sync_strt_wid & 0x7ff;
1209 v_sync_wid = (crtc->v_sync_strt_wid >> 16) & 0x1f;
1210 v_sync_pol = (crtc->v_sync_strt_wid >> 23) & 0x1;
1211 c_sync = crtc->gen_cntl & CRTC_CSYNC_EN ? 1 : 0;
1212 pix_width = crtc->gen_cntl & CRTC_PIX_WIDTH_MASK;
1214 /* do conversions */
1215 xres = (h_disp + 1) << 3;
1217 left = ((h_total - h_sync_strt - h_sync_wid) << 3) - h_sync_dly;
1218 right = ((h_sync_strt - h_disp) << 3) + h_sync_dly;
1219 hslen = h_sync_wid << 3;
1220 upper = v_total - v_sync_strt - v_sync_wid;
1221 lower = v_sync_strt - v_disp;
1223 sync = (h_sync_pol ? 0 : FB_SYNC_HOR_HIGH_ACT) |
1224 (v_sync_pol ? 0 : FB_SYNC_VERT_HIGH_ACT) |
1225 (c_sync ? FB_SYNC_COMP_HIGH_ACT : 0);
1227 aty128_pix_width_to_var(pix_width, var);
1231 var->xres_virtual = crtc->vxres;
1232 var->yres_virtual = crtc->vyres;
1233 var->xoffset = crtc->xoffset;
1234 var->yoffset = crtc->yoffset;
1235 var->left_margin = left;
1236 var->right_margin = right;
1237 var->upper_margin = upper;
1238 var->lower_margin = lower;
1239 var->hsync_len = hslen;
1240 var->vsync_len = vslen;
1242 var->vmode = FB_VMODE_NONINTERLACED;
1247 static void aty128_set_crt_enable(struct aty128fb_par *par, int on)
1250 aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) | CRT_CRTC_ON);
1251 aty_st_le32(DAC_CNTL, (aty_ld_le32(DAC_CNTL) | DAC_PALETTE2_SNOOP_EN));
1253 aty_st_le32(CRTC_EXT_CNTL, aty_ld_le32(CRTC_EXT_CNTL) & ~CRT_CRTC_ON);
1256 static void aty128_set_lcd_enable(struct aty128fb_par *par, int on)
1259 #ifdef CONFIG_FB_ATY128_BACKLIGHT
1260 struct fb_info *info = pci_get_drvdata(par->pdev);
1264 reg = aty_ld_le32(LVDS_GEN_CNTL);
1265 reg |= LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION;
1266 reg &= ~LVDS_DISPLAY_DIS;
1267 aty_st_le32(LVDS_GEN_CNTL, reg);
1268 #ifdef CONFIG_FB_ATY128_BACKLIGHT
1269 aty128_bl_set_power(info, FB_BLANK_UNBLANK);
1272 #ifdef CONFIG_FB_ATY128_BACKLIGHT
1273 aty128_bl_set_power(info, FB_BLANK_POWERDOWN);
1275 reg = aty_ld_le32(LVDS_GEN_CNTL);
1276 reg |= LVDS_DISPLAY_DIS;
1277 aty_st_le32(LVDS_GEN_CNTL, reg);
1279 reg &= ~(LVDS_ON /*| LVDS_EN*/);
1280 aty_st_le32(LVDS_GEN_CNTL, reg);
1284 static void aty128_set_pll(struct aty128_pll *pll, const struct aty128fb_par *par)
1288 unsigned char post_conv[] = /* register values for post dividers */
1289 { 2, 0, 1, 4, 2, 2, 6, 2, 3, 2, 2, 2, 7 };
1291 /* select PPLL_DIV_3 */
1292 aty_st_le32(CLOCK_CNTL_INDEX, aty_ld_le32(CLOCK_CNTL_INDEX) | (3 << 8));
1295 aty_st_pll(PPLL_CNTL,
1296 aty_ld_pll(PPLL_CNTL) | PPLL_RESET | PPLL_ATOMIC_UPDATE_EN);
1298 /* write the reference divider */
1299 aty_pll_wait_readupdate(par);
1300 aty_st_pll(PPLL_REF_DIV, par->constants.ref_divider & 0x3ff);
1301 aty_pll_writeupdate(par);
1303 div3 = aty_ld_pll(PPLL_DIV_3);
1304 div3 &= ~PPLL_FB3_DIV_MASK;
1305 div3 |= pll->feedback_divider;
1306 div3 &= ~PPLL_POST3_DIV_MASK;
1307 div3 |= post_conv[pll->post_divider] << 16;
1309 /* write feedback and post dividers */
1310 aty_pll_wait_readupdate(par);
1311 aty_st_pll(PPLL_DIV_3, div3);
1312 aty_pll_writeupdate(par);
1314 aty_pll_wait_readupdate(par);
1315 aty_st_pll(HTOTAL_CNTL, 0); /* no horiz crtc adjustment */
1316 aty_pll_writeupdate(par);
1318 /* clear the reset, just in case */
1319 aty_st_pll(PPLL_CNTL, aty_ld_pll(PPLL_CNTL) & ~PPLL_RESET);
1323 static int aty128_var_to_pll(u32 period_in_ps, struct aty128_pll *pll,
1324 const struct aty128fb_par *par)
1326 const struct aty128_constants c = par->constants;
1327 unsigned char post_dividers[] = {1,2,4,8,3,6,12};
1329 u32 vclk; /* in .01 MHz */
1333 vclk = 100000000 / period_in_ps; /* convert units to 10 kHz */
1335 /* adjust pixel clock if necessary */
1336 if (vclk > c.ppll_max)
1338 if (vclk * 12 < c.ppll_min)
1339 vclk = c.ppll_min/12;
1341 /* now, find an acceptable divider */
1342 for (i = 0; i < ARRAY_SIZE(post_dividers); i++) {
1343 output_freq = post_dividers[i] * vclk;
1344 if (output_freq >= c.ppll_min && output_freq <= c.ppll_max) {
1345 pll->post_divider = post_dividers[i];
1350 if (i == ARRAY_SIZE(post_dividers))
1353 /* calculate feedback divider */
1354 n = c.ref_divider * output_freq;
1357 pll->feedback_divider = round_div(n, d);
1360 DBG("post %d feedback %d vlck %d output %d ref_divider %d "
1361 "vclk_per: %d\n", pll->post_divider,
1362 pll->feedback_divider, vclk, output_freq,
1363 c.ref_divider, period_in_ps);
1369 static int aty128_pll_to_var(const struct aty128_pll *pll, struct fb_var_screeninfo *var)
1371 var->pixclock = 100000000 / pll->vclk;
1377 static void aty128_set_fifo(const struct aty128_ddafifo *dsp,
1378 const struct aty128fb_par *par)
1380 aty_st_le32(DDA_CONFIG, dsp->dda_config);
1381 aty_st_le32(DDA_ON_OFF, dsp->dda_on_off);
1385 static int aty128_ddafifo(struct aty128_ddafifo *dsp,
1386 const struct aty128_pll *pll,
1388 const struct aty128fb_par *par)
1390 const struct aty128_meminfo *m = par->mem;
1391 u32 xclk = par->constants.xclk;
1392 u32 fifo_width = par->constants.fifo_width;
1393 u32 fifo_depth = par->constants.fifo_depth;
1394 s32 x, b, p, ron, roff;
1397 /* round up to multiple of 8 */
1398 bpp = (depth+7) & ~7;
1400 n = xclk * fifo_width;
1401 d = pll->vclk * bpp;
1402 x = round_div(n, d);
1405 3 * ((m->Trcd - 2 > 0) ? m->Trcd - 2 : 0) +
1424 x = round_div(n, d);
1425 roff = x * (fifo_depth - 4);
1427 if ((ron + m->Rloop) >= roff) {
1428 printk(KERN_ERR "aty128fb: Mode out of range!\n");
1432 DBG("p: %x rloop: %x x: %x ron: %x roff: %x\n",
1433 p, m->Rloop, x, ron, roff);
1435 dsp->dda_config = p << 16 | m->Rloop << 20 | x;
1436 dsp->dda_on_off = ron << 16 | roff;
1443 * This actually sets the video mode.
1445 static int aty128fb_set_par(struct fb_info *info)
1447 struct aty128fb_par *par = info->par;
1451 if ((err = aty128_decode_var(&info->var, par)) != 0)
1454 if (par->blitter_may_be_busy)
1457 /* clear all registers that may interfere with mode setting */
1458 aty_st_le32(OVR_CLR, 0);
1459 aty_st_le32(OVR_WID_LEFT_RIGHT, 0);
1460 aty_st_le32(OVR_WID_TOP_BOTTOM, 0);
1461 aty_st_le32(OV0_SCALE_CNTL, 0);
1462 aty_st_le32(MPP_TB_CONFIG, 0);
1463 aty_st_le32(MPP_GP_CONFIG, 0);
1464 aty_st_le32(SUBPIC_CNTL, 0);
1465 aty_st_le32(VIPH_CONTROL, 0);
1466 aty_st_le32(I2C_CNTL_1, 0); /* turn off i2c */
1467 aty_st_le32(GEN_INT_CNTL, 0); /* turn off interrupts */
1468 aty_st_le32(CAP0_TRIG_CNTL, 0);
1469 aty_st_le32(CAP1_TRIG_CNTL, 0);
1471 aty_st_8(CRTC_EXT_CNTL + 1, 4); /* turn video off */
1473 aty128_set_crtc(&par->crtc, par);
1474 aty128_set_pll(&par->pll, par);
1475 aty128_set_fifo(&par->fifo_reg, par);
1477 config = aty_ld_le32(CNFG_CNTL) & ~3;
1479 #if defined(__BIG_ENDIAN)
1480 if (par->crtc.bpp == 32)
1481 config |= 2; /* make aperture do 32 bit swapping */
1482 else if (par->crtc.bpp == 16)
1483 config |= 1; /* make aperture do 16 bit swapping */
1486 aty_st_le32(CNFG_CNTL, config);
1487 aty_st_8(CRTC_EXT_CNTL + 1, 0); /* turn the video back on */
1489 info->fix.line_length = (par->crtc.vxres * par->crtc.bpp) >> 3;
1490 info->fix.visual = par->crtc.bpp == 8 ? FB_VISUAL_PSEUDOCOLOR
1491 : FB_VISUAL_DIRECTCOLOR;
1493 if (par->chip_gen == rage_M3) {
1494 aty128_set_crt_enable(par, par->crt_on);
1495 aty128_set_lcd_enable(par, par->lcd_on);
1497 if (par->accel_flags & FB_ACCELF_TEXT)
1498 aty128_init_engine(par);
1500 #ifdef CONFIG_BOOTX_TEXT
1501 btext_update_display(info->fix.smem_start,
1502 (((par->crtc.h_total>>16) & 0xff)+1)*8,
1503 ((par->crtc.v_total>>16) & 0x7ff)+1,
1505 par->crtc.vxres*par->crtc.bpp/8);
1506 #endif /* CONFIG_BOOTX_TEXT */
1512 * encode/decode the User Defined Part of the Display
1515 static int aty128_decode_var(struct fb_var_screeninfo *var, struct aty128fb_par *par)
1518 struct aty128_crtc crtc;
1519 struct aty128_pll pll;
1520 struct aty128_ddafifo fifo_reg;
1522 if ((err = aty128_var_to_crtc(var, &crtc, par)))
1525 if ((err = aty128_var_to_pll(var->pixclock, &pll, par)))
1528 if ((err = aty128_ddafifo(&fifo_reg, &pll, crtc.depth, par)))
1533 par->fifo_reg = fifo_reg;
1534 par->accel_flags = var->accel_flags;
1540 static int aty128_encode_var(struct fb_var_screeninfo *var,
1541 const struct aty128fb_par *par)
1545 if ((err = aty128_crtc_to_var(&par->crtc, var)))
1548 if ((err = aty128_pll_to_var(&par->pll, var)))
1556 var->accel_flags = par->accel_flags;
1562 static int aty128fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
1564 struct aty128fb_par par;
1567 par = *(struct aty128fb_par *)info->par;
1568 if ((err = aty128_decode_var(var, &par)) != 0)
1570 aty128_encode_var(var, &par);
1576 * Pan or Wrap the Display
1578 static int aty128fb_pan_display(struct fb_var_screeninfo *var, struct fb_info *fb)
1580 struct aty128fb_par *par = fb->par;
1581 u32 xoffset, yoffset;
1585 xres = (((par->crtc.h_total >> 16) & 0xff) + 1) << 3;
1586 yres = ((par->crtc.v_total >> 16) & 0x7ff) + 1;
1588 xoffset = (var->xoffset +7) & ~7;
1589 yoffset = var->yoffset;
1591 if (xoffset+xres > par->crtc.vxres || yoffset+yres > par->crtc.vyres)
1594 par->crtc.xoffset = xoffset;
1595 par->crtc.yoffset = yoffset;
1597 offset = ((yoffset * par->crtc.vxres + xoffset)*(par->crtc.bpp >> 3)) & ~7;
1599 if (par->crtc.bpp == 24)
1600 offset += 8 * (offset % 3); /* Must be multiple of 8 and 3 */
1602 aty_st_le32(CRTC_OFFSET, offset);
1609 * Helper function to store a single palette register
1611 static void aty128_st_pal(u_int regno, u_int red, u_int green, u_int blue,
1612 struct aty128fb_par *par)
1614 if (par->chip_gen == rage_M3) {
1616 /* Note: For now, on M3, we set palette on both heads, which may
1617 * be useless. Can someone with a M3 check this ?
1619 * This code would still be useful if using the second CRTC to
1623 aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PALETTE_ACCESS_CNTL);
1624 aty_st_8(PALETTE_INDEX, regno);
1625 aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue);
1627 aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & ~DAC_PALETTE_ACCESS_CNTL);
1630 aty_st_8(PALETTE_INDEX, regno);
1631 aty_st_le32(PALETTE_DATA, (red<<16)|(green<<8)|blue);
1634 static int aty128fb_sync(struct fb_info *info)
1636 struct aty128fb_par *par = info->par;
1638 if (par->blitter_may_be_busy)
1644 static int __devinit aty128fb_setup(char *options)
1648 if (!options || !*options)
1651 while ((this_opt = strsep(&options, ",")) != NULL) {
1652 if (!strncmp(this_opt, "lcd:", 4)) {
1653 default_lcd_on = simple_strtoul(this_opt+4, NULL, 0);
1655 } else if (!strncmp(this_opt, "crt:", 4)) {
1656 default_crt_on = simple_strtoul(this_opt+4, NULL, 0);
1658 } else if (!strncmp(this_opt, "backlight:", 10)) {
1659 backlight = simple_strtoul(this_opt+10, NULL, 0);
1663 if(!strncmp(this_opt, "nomtrr", 6)) {
1668 #ifdef CONFIG_PPC_PMAC
1669 /* vmode and cmode deprecated */
1670 if (!strncmp(this_opt, "vmode:", 6)) {
1671 unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0);
1672 if (vmode > 0 && vmode <= VMODE_MAX)
1673 default_vmode = vmode;
1675 } else if (!strncmp(this_opt, "cmode:", 6)) {
1676 unsigned int cmode = simple_strtoul(this_opt+6, NULL, 0);
1680 default_cmode = CMODE_8;
1684 default_cmode = CMODE_16;
1688 default_cmode = CMODE_32;
1693 #endif /* CONFIG_PPC_PMAC */
1694 mode_option = this_opt;
1701 #ifdef CONFIG_FB_ATY128_BACKLIGHT
1702 #define MAX_LEVEL 0xFF
1704 static int aty128_bl_get_level_brightness(struct aty128fb_par *par,
1707 struct fb_info *info = pci_get_drvdata(par->pdev);
1710 /* Get and convert the value */
1711 /* No locking of bl_curve since we read a single value */
1712 atylevel = MAX_LEVEL -
1713 (info->bl_curve[level] * FB_BACKLIGHT_MAX / MAX_LEVEL);
1717 else if (atylevel > MAX_LEVEL)
1718 atylevel = MAX_LEVEL;
1723 /* We turn off the LCD completely instead of just dimming the backlight.
1724 * This provides greater power saving and the display is useless without
1727 #define BACKLIGHT_LVDS_OFF
1728 /* That one prevents proper CRT output with LCD off */
1729 #undef BACKLIGHT_DAC_OFF
1731 static int aty128_bl_update_status(struct backlight_device *bd)
1733 struct aty128fb_par *par = bl_get_data(bd);
1734 unsigned int reg = aty_ld_le32(LVDS_GEN_CNTL);
1737 if (bd->props.power != FB_BLANK_UNBLANK ||
1738 bd->props.fb_blank != FB_BLANK_UNBLANK ||
1742 level = bd->props.brightness;
1744 reg |= LVDS_BL_MOD_EN | LVDS_BLON;
1747 if (!(reg & LVDS_ON)) {
1749 aty_st_le32(LVDS_GEN_CNTL, reg);
1750 aty_ld_le32(LVDS_GEN_CNTL);
1753 aty_st_le32(LVDS_GEN_CNTL, reg);
1755 reg &= ~LVDS_BL_MOD_LEVEL_MASK;
1756 reg |= (aty128_bl_get_level_brightness(par, level) << LVDS_BL_MOD_LEVEL_SHIFT);
1757 #ifdef BACKLIGHT_LVDS_OFF
1758 reg |= LVDS_ON | LVDS_EN;
1759 reg &= ~LVDS_DISPLAY_DIS;
1761 aty_st_le32(LVDS_GEN_CNTL, reg);
1762 #ifdef BACKLIGHT_DAC_OFF
1763 aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) & (~DAC_PDWN));
1766 reg &= ~LVDS_BL_MOD_LEVEL_MASK;
1767 reg |= (aty128_bl_get_level_brightness(par, 0) << LVDS_BL_MOD_LEVEL_SHIFT);
1768 #ifdef BACKLIGHT_LVDS_OFF
1769 reg |= LVDS_DISPLAY_DIS;
1770 aty_st_le32(LVDS_GEN_CNTL, reg);
1771 aty_ld_le32(LVDS_GEN_CNTL);
1773 reg &= ~(LVDS_ON | LVDS_EN | LVDS_BLON | LVDS_DIGION);
1775 aty_st_le32(LVDS_GEN_CNTL, reg);
1776 #ifdef BACKLIGHT_DAC_OFF
1777 aty_st_le32(DAC_CNTL, aty_ld_le32(DAC_CNTL) | DAC_PDWN);
1784 static int aty128_bl_get_brightness(struct backlight_device *bd)
1786 return bd->props.brightness;
1789 static const struct backlight_ops aty128_bl_data = {
1790 .get_brightness = aty128_bl_get_brightness,
1791 .update_status = aty128_bl_update_status,
1794 static void aty128_bl_set_power(struct fb_info *info, int power)
1797 info->bl_dev->props.power = power;
1798 backlight_update_status(info->bl_dev);
1802 static void aty128_bl_init(struct aty128fb_par *par)
1804 struct backlight_properties props;
1805 struct fb_info *info = pci_get_drvdata(par->pdev);
1806 struct backlight_device *bd;
1809 /* Could be extended to Rage128Pro LVDS output too */
1810 if (par->chip_gen != rage_M3)
1813 #ifdef CONFIG_PMAC_BACKLIGHT
1814 if (!pmac_has_backlight_type("ati"))
1818 snprintf(name, sizeof(name), "aty128bl%d", info->node);
1820 memset(&props, 0, sizeof(struct backlight_properties));
1821 props.type = BACKLIGHT_RAW;
1822 props.max_brightness = FB_BACKLIGHT_LEVELS - 1;
1823 bd = backlight_device_register(name, info->dev, par, &aty128_bl_data,
1826 info->bl_dev = NULL;
1827 printk(KERN_WARNING "aty128: Backlight registration failed\n");
1832 fb_bl_default_curve(info, 0,
1833 63 * FB_BACKLIGHT_MAX / MAX_LEVEL,
1834 219 * FB_BACKLIGHT_MAX / MAX_LEVEL);
1836 bd->props.brightness = bd->props.max_brightness;
1837 bd->props.power = FB_BLANK_UNBLANK;
1838 backlight_update_status(bd);
1840 printk("aty128: Backlight initialized (%s)\n", name);
1848 static void aty128_bl_exit(struct backlight_device *bd)
1850 backlight_device_unregister(bd);
1851 printk("aty128: Backlight unloaded\n");
1853 #endif /* CONFIG_FB_ATY128_BACKLIGHT */
1859 #ifdef CONFIG_PPC_PMAC__disabled
1860 static void aty128_early_resume(void *data)
1862 struct aty128fb_par *par = data;
1864 if (!console_trylock())
1866 pci_restore_state(par->pdev);
1867 aty128_do_resume(par->pdev);
1870 #endif /* CONFIG_PPC_PMAC */
1872 static int __devinit aty128_init(struct pci_dev *pdev, const struct pci_device_id *ent)
1874 struct fb_info *info = pci_get_drvdata(pdev);
1875 struct aty128fb_par *par = info->par;
1876 struct fb_var_screeninfo var;
1877 char video_card[50];
1881 /* Get the chip revision */
1882 chip_rev = (aty_ld_le32(CNFG_CNTL) >> 16) & 0x1F;
1884 strcpy(video_card, "Rage128 XX ");
1885 video_card[8] = ent->device >> 8;
1886 video_card[9] = ent->device & 0xFF;
1888 /* range check to make sure */
1889 if (ent->driver_data < ARRAY_SIZE(r128_family))
1890 strlcat(video_card, r128_family[ent->driver_data], sizeof(video_card));
1892 printk(KERN_INFO "aty128fb: %s [chip rev 0x%x] ", video_card, chip_rev);
1894 if (par->vram_size % (1024 * 1024) == 0)
1895 printk("%dM %s\n", par->vram_size / (1024*1024), par->mem->name);
1897 printk("%dk %s\n", par->vram_size / 1024, par->mem->name);
1899 par->chip_gen = ent->driver_data;
1902 info->fbops = &aty128fb_ops;
1903 info->flags = FBINFO_FLAG_DEFAULT;
1905 par->lcd_on = default_lcd_on;
1906 par->crt_on = default_crt_on;
1909 #ifdef CONFIG_PPC_PMAC
1910 if (machine_is(powermac)) {
1911 /* Indicate sleep capability */
1912 if (par->chip_gen == rage_M3) {
1913 pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, NULL, 0, 1);
1914 #if 0 /* Disable the early video resume hack for now as it's causing problems, among
1915 * others we now rely on the PCI core restoring the config space for us, which
1916 * isn't the case with that hack, and that code path causes various things to
1917 * be called with interrupts off while they shouldn't. I'm leaving the code in
1918 * as it can be useful for debugging purposes
1920 pmac_set_early_video_resume(aty128_early_resume, par);
1924 /* Find default mode */
1926 if (!mac_find_mode(&var, info, mode_option, 8))
1929 if (default_vmode <= 0 || default_vmode > VMODE_MAX)
1930 default_vmode = VMODE_1024_768_60;
1932 /* iMacs need that resolution
1933 * PowerMac2,1 first r128 iMacs
1934 * PowerMac2,2 summer 2000 iMacs
1935 * PowerMac4,1 january 2001 iMacs "flower power"
1937 if (of_machine_is_compatible("PowerMac2,1") ||
1938 of_machine_is_compatible("PowerMac2,2") ||
1939 of_machine_is_compatible("PowerMac4,1"))
1940 default_vmode = VMODE_1024_768_75;
1943 if (of_machine_is_compatible("PowerBook2,2"))
1944 default_vmode = VMODE_800_600_60;
1946 /* PowerBook Firewire (Pismo), iBook Dual USB */
1947 if (of_machine_is_compatible("PowerBook3,1") ||
1948 of_machine_is_compatible("PowerBook4,1"))
1949 default_vmode = VMODE_1024_768_60;
1951 /* PowerBook Titanium */
1952 if (of_machine_is_compatible("PowerBook3,2"))
1953 default_vmode = VMODE_1152_768_60;
1955 if (default_cmode > 16)
1956 default_cmode = CMODE_32;
1957 else if (default_cmode > 8)
1958 default_cmode = CMODE_16;
1960 default_cmode = CMODE_8;
1962 if (mac_vmode_to_var(default_vmode, default_cmode, &var))
1966 #endif /* CONFIG_PPC_PMAC */
1969 if (fb_find_mode(&var, info, mode_option, NULL,
1970 0, &defaultmode, 8) == 0)
1974 var.accel_flags &= ~FB_ACCELF_TEXT;
1975 // var.accel_flags |= FB_ACCELF_TEXT;/* FIXME Will add accel later */
1977 if (aty128fb_check_var(&var, info)) {
1978 printk(KERN_ERR "aty128fb: Cannot set default mode.\n");
1982 /* setup the DAC the way we like it */
1983 dac = aty_ld_le32(DAC_CNTL);
1984 dac |= (DAC_8BIT_EN | DAC_RANGE_CNTL);
1986 if (par->chip_gen == rage_M3)
1987 dac |= DAC_PALETTE2_SNOOP_EN;
1988 aty_st_le32(DAC_CNTL, dac);
1990 /* turn off bus mastering, just in case */
1991 aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL) | BUS_MASTER_DIS);
1994 fb_alloc_cmap(&info->cmap, 256, 0);
1996 var.activate = FB_ACTIVATE_NOW;
1998 aty128_init_engine(par);
2000 par->pm_reg = pci_find_capability(pdev, PCI_CAP_ID_PM);
2003 par->lock_blank = 0;
2005 #ifdef CONFIG_FB_ATY128_BACKLIGHT
2007 aty128_bl_init(par);
2010 if (register_framebuffer(info) < 0)
2013 printk(KERN_INFO "fb%d: %s frame buffer device on %s\n",
2014 info->node, info->fix.id, video_card);
2016 return 1; /* success! */
2020 /* register a card ++ajoshi */
2021 static int __devinit aty128_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2023 unsigned long fb_addr, reg_addr;
2024 struct aty128fb_par *par;
2025 struct fb_info *info;
2028 void __iomem *bios = NULL;
2031 /* Enable device in PCI config */
2032 if ((err = pci_enable_device(pdev))) {
2033 printk(KERN_ERR "aty128fb: Cannot enable PCI device: %d\n",
2038 fb_addr = pci_resource_start(pdev, 0);
2039 if (!request_mem_region(fb_addr, pci_resource_len(pdev, 0),
2041 printk(KERN_ERR "aty128fb: cannot reserve frame "
2046 reg_addr = pci_resource_start(pdev, 2);
2047 if (!request_mem_region(reg_addr, pci_resource_len(pdev, 2),
2049 printk(KERN_ERR "aty128fb: cannot reserve MMIO region\n");
2053 /* We have the resources. Now virtualize them */
2054 info = framebuffer_alloc(sizeof(struct aty128fb_par), &pdev->dev);
2056 printk(KERN_ERR "aty128fb: can't alloc fb_info_aty128\n");
2061 info->pseudo_palette = par->pseudo_palette;
2063 /* Virtualize mmio region */
2064 info->fix.mmio_start = reg_addr;
2065 par->regbase = pci_ioremap_bar(pdev, 2);
2069 /* Grab memory size from the card */
2070 // How does this relate to the resource length from the PCI hardware?
2071 par->vram_size = aty_ld_le32(CNFG_MEMSIZE) & 0x03FFFFFF;
2073 /* Virtualize the framebuffer */
2074 info->screen_base = ioremap(fb_addr, par->vram_size);
2075 if (!info->screen_base)
2078 /* Set up info->fix */
2079 info->fix = aty128fb_fix;
2080 info->fix.smem_start = fb_addr;
2081 info->fix.smem_len = par->vram_size;
2082 info->fix.mmio_start = reg_addr;
2084 /* If we can't test scratch registers, something is seriously wrong */
2085 if (!register_test(par)) {
2086 printk(KERN_ERR "aty128fb: Can't write to video register!\n");
2091 bios = aty128_map_ROM(par, pdev);
2094 bios = aty128_find_mem_vbios(par);
2097 printk(KERN_INFO "aty128fb: BIOS not located, guessing timings.\n");
2099 printk(KERN_INFO "aty128fb: Rage128 BIOS located\n");
2100 aty128_get_pllinfo(par, bios);
2101 pci_unmap_rom(pdev, bios);
2103 #endif /* __sparc__ */
2105 aty128_timings(par);
2106 pci_set_drvdata(pdev, info);
2108 if (!aty128_init(pdev, ent))
2113 par->mtrr.vram = mtrr_add(info->fix.smem_start,
2114 par->vram_size, MTRR_TYPE_WRCOMB, 1);
2115 par->mtrr.vram_valid = 1;
2116 /* let there be speed */
2117 printk(KERN_INFO "aty128fb: Rage128 MTRR set to ON\n");
2119 #endif /* CONFIG_MTRR */
2123 iounmap(info->screen_base);
2125 iounmap(par->regbase);
2127 framebuffer_release(info);
2129 release_mem_region(pci_resource_start(pdev, 2),
2130 pci_resource_len(pdev, 2));
2132 release_mem_region(pci_resource_start(pdev, 0),
2133 pci_resource_len(pdev, 0));
2137 static void __devexit aty128_remove(struct pci_dev *pdev)
2139 struct fb_info *info = pci_get_drvdata(pdev);
2140 struct aty128fb_par *par;
2147 unregister_framebuffer(info);
2149 #ifdef CONFIG_FB_ATY128_BACKLIGHT
2150 aty128_bl_exit(info->bl_dev);
2154 if (par->mtrr.vram_valid)
2155 mtrr_del(par->mtrr.vram, info->fix.smem_start,
2157 #endif /* CONFIG_MTRR */
2158 iounmap(par->regbase);
2159 iounmap(info->screen_base);
2161 release_mem_region(pci_resource_start(pdev, 0),
2162 pci_resource_len(pdev, 0));
2163 release_mem_region(pci_resource_start(pdev, 2),
2164 pci_resource_len(pdev, 2));
2165 framebuffer_release(info);
2167 #endif /* CONFIG_PCI */
2172 * Blank the display.
2174 static int aty128fb_blank(int blank, struct fb_info *fb)
2176 struct aty128fb_par *par = fb->par;
2179 if (par->lock_blank || par->asleep)
2183 case FB_BLANK_NORMAL:
2186 case FB_BLANK_VSYNC_SUSPEND:
2189 case FB_BLANK_HSYNC_SUSPEND:
2192 case FB_BLANK_POWERDOWN:
2195 case FB_BLANK_UNBLANK:
2200 aty_st_8(CRTC_EXT_CNTL+1, state);
2202 if (par->chip_gen == rage_M3) {
2203 aty128_set_crt_enable(par, par->crt_on && !blank);
2204 aty128_set_lcd_enable(par, par->lcd_on && !blank);
2211 * Set a single color register. The values supplied are already
2212 * rounded down to the hardware's capabilities (according to the
2213 * entries in the var structure). Return != 0 for invalid regno.
2215 static int aty128fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
2216 u_int transp, struct fb_info *info)
2218 struct aty128fb_par *par = info->par;
2221 || (par->crtc.depth == 16 && regno > 63)
2222 || (par->crtc.depth == 15 && regno > 31))
2231 u32 *pal = info->pseudo_palette;
2233 switch (par->crtc.depth) {
2235 pal[regno] = (regno << 10) | (regno << 5) | regno;
2238 pal[regno] = (regno << 11) | (regno << 6) | regno;
2241 pal[regno] = (regno << 16) | (regno << 8) | regno;
2244 i = (regno << 8) | regno;
2245 pal[regno] = (i << 16) | i;
2250 if (par->crtc.depth == 16 && regno > 0) {
2252 * With the 5-6-5 split of bits for RGB at 16 bits/pixel, we
2253 * have 32 slots for R and B values but 64 slots for G values.
2254 * Thus the R and B values go in one slot but the G value
2255 * goes in a different slot, and we have to avoid disturbing
2256 * the other fields in the slots we touch.
2258 par->green[regno] = green;
2260 par->red[regno] = red;
2261 par->blue[regno] = blue;
2262 aty128_st_pal(regno * 8, red, par->green[regno*2],
2265 red = par->red[regno/2];
2266 blue = par->blue[regno/2];
2268 } else if (par->crtc.bpp == 16)
2270 aty128_st_pal(regno, red, green, blue, par);
2275 #define ATY_MIRROR_LCD_ON 0x00000001
2276 #define ATY_MIRROR_CRT_ON 0x00000002
2278 /* out param: u32* backlight value: 0 to 15 */
2279 #define FBIO_ATY128_GET_MIRROR _IOR('@', 1, __u32)
2280 /* in param: u32* backlight value: 0 to 15 */
2281 #define FBIO_ATY128_SET_MIRROR _IOW('@', 2, __u32)
2283 static int aty128fb_ioctl(struct fb_info *info, u_int cmd, u_long arg)
2285 struct aty128fb_par *par = info->par;
2290 case FBIO_ATY128_SET_MIRROR:
2291 if (par->chip_gen != rage_M3)
2293 rc = get_user(value, (__u32 __user *)arg);
2296 par->lcd_on = (value & 0x01) != 0;
2297 par->crt_on = (value & 0x02) != 0;
2298 if (!par->crt_on && !par->lcd_on)
2300 aty128_set_crt_enable(par, par->crt_on);
2301 aty128_set_lcd_enable(par, par->lcd_on);
2303 case FBIO_ATY128_GET_MIRROR:
2304 if (par->chip_gen != rage_M3)
2306 value = (par->crt_on << 1) | par->lcd_on;
2307 return put_user(value, (__u32 __user *)arg);
2314 * Accelerated functions
2317 static inline void aty128_rectcopy(int srcx, int srcy, int dstx, int dsty,
2318 u_int width, u_int height,
2319 struct fb_info_aty128 *par)
2321 u32 save_dp_datatype, save_dp_cntl, dstval;
2323 if (!width || !height)
2326 dstval = depth_to_dst(par->current_par.crtc.depth);
2327 if (dstval == DST_24BPP) {
2331 } else if (dstval == -EINVAL) {
2332 printk("aty128fb: invalid depth or RGBA\n");
2336 wait_for_fifo(2, par);
2337 save_dp_datatype = aty_ld_le32(DP_DATATYPE);
2338 save_dp_cntl = aty_ld_le32(DP_CNTL);
2340 wait_for_fifo(6, par);
2341 aty_st_le32(SRC_Y_X, (srcy << 16) | srcx);
2342 aty_st_le32(DP_MIX, ROP3_SRCCOPY | DP_SRC_RECT);
2343 aty_st_le32(DP_CNTL, DST_X_LEFT_TO_RIGHT | DST_Y_TOP_TO_BOTTOM);
2344 aty_st_le32(DP_DATATYPE, save_dp_datatype | dstval | SRC_DSTCOLOR);
2346 aty_st_le32(DST_Y_X, (dsty << 16) | dstx);
2347 aty_st_le32(DST_HEIGHT_WIDTH, (height << 16) | width);
2349 par->blitter_may_be_busy = 1;
2351 wait_for_fifo(2, par);
2352 aty_st_le32(DP_DATATYPE, save_dp_datatype);
2353 aty_st_le32(DP_CNTL, save_dp_cntl);
2358 * Text mode accelerated functions
2361 static void fbcon_aty128_bmove(struct display *p, int sy, int sx, int dy, int dx,
2362 int height, int width)
2365 sy *= fontheight(p);
2367 dy *= fontheight(p);
2368 width *= fontwidth(p);
2369 height *= fontheight(p);
2371 aty128_rectcopy(sx, sy, dx, dy, width, height,
2372 (struct fb_info_aty128 *)p->fb_info);
2376 static void aty128_set_suspend(struct aty128fb_par *par, int suspend)
2379 struct pci_dev *pdev = par->pdev;
2384 /* Set the chip into the appropriate suspend mode (we use D2,
2385 * D3 would require a complete re-initialisation of the chip,
2386 * including PCI config registers, clocks, AGP configuration, ...)
2388 * For resume, the core will have already brought us back to D0
2391 /* Make sure CRTC2 is reset. Remove that the day we decide to
2392 * actually use CRTC2 and replace it with real code for disabling
2393 * the CRTC2 output during sleep
2395 aty_st_le32(CRTC2_GEN_CNTL, aty_ld_le32(CRTC2_GEN_CNTL) &
2398 /* Set the power management mode to be PCI based */
2399 /* Use this magic value for now */
2401 aty_st_pll(POWER_MANAGEMENT, pmgt);
2402 (void)aty_ld_pll(POWER_MANAGEMENT);
2403 aty_st_le32(BUS_CNTL1, 0x00000010);
2404 aty_st_le32(MEM_POWER_MISC, 0x0c830000);
2407 /* Switch PCI power management to D2 */
2408 pci_set_power_state(pdev, PCI_D2);
2412 static int aty128_pci_suspend(struct pci_dev *pdev, pm_message_t state)
2414 struct fb_info *info = pci_get_drvdata(pdev);
2415 struct aty128fb_par *par = info->par;
2417 /* Because we may change PCI D state ourselves, we need to
2418 * first save the config space content so the core can
2419 * restore it properly on resume.
2421 pci_save_state(pdev);
2423 /* We don't do anything but D2, for now we return 0, but
2424 * we may want to change that. How do we know if the BIOS
2425 * can properly take care of D3 ? Also, with swsusp, we
2426 * know we'll be rebooted, ...
2428 #ifndef CONFIG_PPC_PMAC
2429 /* HACK ALERT ! Once I find a proper way to say to each driver
2430 * individually what will happen with it's PCI slot, I'll change
2431 * that. On laptops, the AGP slot is just unclocked, so D2 is
2432 * expected, while on desktops, the card is powered off
2435 #endif /* CONFIG_PPC_PMAC */
2437 if (state.event == pdev->dev.power.power_state.event)
2440 printk(KERN_DEBUG "aty128fb: suspending...\n");
2444 fb_set_suspend(info, 1);
2446 /* Make sure engine is reset */
2448 aty128_reset_engine(par);
2451 /* Blank display and LCD */
2452 aty128fb_blank(FB_BLANK_POWERDOWN, info);
2456 par->lock_blank = 1;
2458 #ifdef CONFIG_PPC_PMAC
2459 /* On powermac, we have hooks to properly suspend/resume AGP now,
2460 * use them here. We'll ultimately need some generic support here,
2461 * but the generic code isn't quite ready for that yet
2463 pmac_suspend_agp_for_card(pdev);
2464 #endif /* CONFIG_PPC_PMAC */
2466 /* We need a way to make sure the fbdev layer will _not_ touch the
2467 * framebuffer before we put the chip to suspend state. On 2.4, I
2468 * used dummy fb ops, 2.5 need proper support for this at the
2471 if (state.event != PM_EVENT_ON)
2472 aty128_set_suspend(par, 1);
2476 pdev->dev.power.power_state = state;
2481 static int aty128_do_resume(struct pci_dev *pdev)
2483 struct fb_info *info = pci_get_drvdata(pdev);
2484 struct aty128fb_par *par = info->par;
2486 if (pdev->dev.power.power_state.event == PM_EVENT_ON)
2489 /* PCI state will have been restored by the core, so
2490 * we should be in D0 now with our config space fully
2495 aty128_set_suspend(par, 0);
2498 /* Restore display & engine */
2499 aty128_reset_engine(par);
2501 aty128fb_set_par(info);
2502 fb_pan_display(info, &info->var);
2503 fb_set_cmap(&info->cmap, info);
2506 fb_set_suspend(info, 0);
2509 par->lock_blank = 0;
2510 aty128fb_blank(0, info);
2512 #ifdef CONFIG_PPC_PMAC
2513 /* On powermac, we have hooks to properly suspend/resume AGP now,
2514 * use them here. We'll ultimately need some generic support here,
2515 * but the generic code isn't quite ready for that yet
2517 pmac_resume_agp_for_card(pdev);
2518 #endif /* CONFIG_PPC_PMAC */
2520 pdev->dev.power.power_state = PMSG_ON;
2522 printk(KERN_DEBUG "aty128fb: resumed !\n");
2527 static int aty128_pci_resume(struct pci_dev *pdev)
2532 rc = aty128_do_resume(pdev);
2539 static int __devinit aty128fb_init(void)
2542 char *option = NULL;
2544 if (fb_get_options("aty128fb", &option))
2546 aty128fb_setup(option);
2549 return pci_register_driver(&aty128fb_driver);
2552 static void __exit aty128fb_exit(void)
2554 pci_unregister_driver(&aty128fb_driver);
2557 module_init(aty128fb_init);
2559 module_exit(aty128fb_exit);
2561 MODULE_AUTHOR("(c)1999-2003 Brad Douglas <brad@neruo.com>");
2562 MODULE_DESCRIPTION("FBDev driver for ATI Rage128 / Pro cards");
2563 MODULE_LICENSE("GPL");
2564 module_param(mode_option, charp, 0);
2565 MODULE_PARM_DESC(mode_option, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
2567 module_param_named(nomtrr, mtrr, invbool, 0);
2568 MODULE_PARM_DESC(nomtrr, "bool: Disable MTRR support (0 or 1=disabled) (default=0)");