2 * Common code for AUO-K190X framebuffer drivers
4 * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <linux/module.h>
12 #include <linux/kernel.h>
13 #include <linux/gpio.h>
14 #include <linux/platform_device.h>
15 #include <linux/pm_runtime.h>
17 #include <linux/delay.h>
18 #include <linux/uaccess.h>
19 #include <linux/vmalloc.h>
20 #include <linux/regulator/consumer.h>
22 #include <video/auo_k190xfb.h>
24 #include "auo_k190x.h"
31 /* table of panel specific parameters to be indexed into by the board drivers */
32 static struct panel_info panel_table[] = {
34 [AUOK190X_RESOLUTION_800_600] = {
39 [AUOK190X_RESOLUTION_1024_768] = {
46 * private I80 interface to the board driver
49 static void auok190x_issue_data(struct auok190xfb_par *par, u16 data)
51 par->board->set_ctl(par, AUOK190X_I80_WR, 0);
52 par->board->set_hdb(par, data);
53 par->board->set_ctl(par, AUOK190X_I80_WR, 1);
56 static void auok190x_issue_cmd(struct auok190xfb_par *par, u16 data)
58 par->board->set_ctl(par, AUOK190X_I80_DC, 0);
59 auok190x_issue_data(par, data);
60 par->board->set_ctl(par, AUOK190X_I80_DC, 1);
63 static int auok190x_issue_pixels(struct auok190xfb_par *par, int size,
66 struct device *dev = par->info->device;
71 dev_err(dev, "issue_pixels: size %d must be a multiple of 4\n",
76 for (i = 0; i < (size >> 1); i++) {
77 par->board->set_ctl(par, AUOK190X_I80_WR, 0);
79 /* simple reduction of 8bit staticgray to 4bit gray
80 * combines 4 * 4bit pixel values into a 16bit value
82 tmp = (data[2*i] & 0xF0) >> 4;
83 tmp |= (data[2*i] & 0xF000) >> 8;
84 tmp |= (data[2*i+1] & 0xF0) << 4;
85 tmp |= (data[2*i+1] & 0xF000);
87 par->board->set_hdb(par, tmp);
88 par->board->set_ctl(par, AUOK190X_I80_WR, 1);
94 static u16 auok190x_read_data(struct auok190xfb_par *par)
98 par->board->set_ctl(par, AUOK190X_I80_OE, 0);
99 data = par->board->get_hdb(par);
100 par->board->set_ctl(par, AUOK190X_I80_OE, 1);
106 * Command interface for the controller drivers
109 void auok190x_send_command_nowait(struct auok190xfb_par *par, u16 data)
111 par->board->set_ctl(par, AUOK190X_I80_CS, 0);
112 auok190x_issue_cmd(par, data);
113 par->board->set_ctl(par, AUOK190X_I80_CS, 1);
115 EXPORT_SYMBOL_GPL(auok190x_send_command_nowait);
117 void auok190x_send_cmdargs_nowait(struct auok190xfb_par *par, u16 cmd,
122 par->board->set_ctl(par, AUOK190X_I80_CS, 0);
123 auok190x_issue_cmd(par, cmd);
125 for (i = 0; i < argc; i++)
126 auok190x_issue_data(par, argv[i]);
127 par->board->set_ctl(par, AUOK190X_I80_CS, 1);
129 EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_nowait);
131 int auok190x_send_command(struct auok190xfb_par *par, u16 data)
135 ret = par->board->wait_for_rdy(par);
139 auok190x_send_command_nowait(par, data);
142 EXPORT_SYMBOL_GPL(auok190x_send_command);
144 int auok190x_send_cmdargs(struct auok190xfb_par *par, u16 cmd,
149 ret = par->board->wait_for_rdy(par);
153 auok190x_send_cmdargs_nowait(par, cmd, argc, argv);
156 EXPORT_SYMBOL_GPL(auok190x_send_cmdargs);
158 int auok190x_read_cmdargs(struct auok190xfb_par *par, u16 cmd,
163 ret = par->board->wait_for_rdy(par);
167 par->board->set_ctl(par, AUOK190X_I80_CS, 0);
168 auok190x_issue_cmd(par, cmd);
170 for (i = 0; i < argc; i++)
171 argv[i] = auok190x_read_data(par);
172 par->board->set_ctl(par, AUOK190X_I80_CS, 1);
176 EXPORT_SYMBOL_GPL(auok190x_read_cmdargs);
178 void auok190x_send_cmdargs_pixels_nowait(struct auok190xfb_par *par, u16 cmd,
179 int argc, u16 *argv, int size, u16 *data)
183 par->board->set_ctl(par, AUOK190X_I80_CS, 0);
185 auok190x_issue_cmd(par, cmd);
187 for (i = 0; i < argc; i++)
188 auok190x_issue_data(par, argv[i]);
190 auok190x_issue_pixels(par, size, data);
192 par->board->set_ctl(par, AUOK190X_I80_CS, 1);
194 EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels_nowait);
196 int auok190x_send_cmdargs_pixels(struct auok190xfb_par *par, u16 cmd,
197 int argc, u16 *argv, int size, u16 *data)
201 ret = par->board->wait_for_rdy(par);
205 auok190x_send_cmdargs_pixels_nowait(par, cmd, argc, argv, size, data);
209 EXPORT_SYMBOL_GPL(auok190x_send_cmdargs_pixels);
212 * fbdefio callbacks - common on both controllers.
215 static void auok190xfb_dpy_first_io(struct fb_info *info)
217 /* tell runtime-pm that we wish to use the device in a short time */
218 pm_runtime_get(info->device);
221 /* this is called back from the deferred io workqueue */
222 static void auok190xfb_dpy_deferred_io(struct fb_info *info,
223 struct list_head *pagelist)
225 struct fb_deferred_io *fbdefio = info->fbdefio;
226 struct auok190xfb_par *par = info->par;
227 u16 yres = info->var.yres;
228 u16 xres = info->var.xres;
235 if (!list_empty(pagelist))
236 /* the device resume should've been requested through first_io,
237 * if the resume did not finish until now, wait for it.
239 pm_runtime_barrier(info->device);
241 /* We reached this via the fsync or some other way.
242 * In either case the first_io function did not run,
243 * so we runtime_resume the device here synchronously.
245 pm_runtime_get_sync(info->device);
247 /* Do a full screen update every n updates to prevent
248 * excessive darkening of the Sipix display.
249 * If we do this, there is no need to walk the pages.
251 if (par->need_refresh(par)) {
252 par->update_all(par);
256 /* height increment is fixed per page */
257 h_inc = DIV_ROUND_UP(PAGE_SIZE , xres);
259 /* calculate number of pages from pixel height */
260 threshold = par->consecutive_threshold / h_inc;
264 /* walk the written page list and swizzle the data */
265 list_for_each_entry(cur, &fbdefio->pagelist, lru) {
266 if (prev_index < 0) {
267 /* just starting so assign first page */
268 y1 = (cur->index << PAGE_SHIFT) / xres;
270 } else if ((cur->index - prev_index) <= threshold) {
271 /* page is within our threshold for single updates */
272 h += h_inc * (cur->index - prev_index);
274 /* page not consecutive, issue previous update first */
275 par->update_partial(par, y1, y1 + h);
277 /* start over with our non consecutive page */
278 y1 = (cur->index << PAGE_SHIFT) / xres;
281 prev_index = cur->index;
284 /* if we still have any pages to update we do so now */
286 /* its a full screen update, just do it */
287 par->update_all(par);
289 par->update_partial(par, y1, min((u16) (y1 + h), yres));
292 pm_runtime_mark_last_busy(info->device);
293 pm_runtime_put_autosuspend(info->device);
297 * framebuffer operations
301 * this is the slow path from userspace. they can seek and write to
302 * the fb. it's inefficient to do anything less than a full screen draw
304 static ssize_t auok190xfb_write(struct fb_info *info, const char __user *buf,
305 size_t count, loff_t *ppos)
307 struct auok190xfb_par *par = info->par;
308 unsigned long p = *ppos;
311 unsigned long total_size;
313 if (info->state != FBINFO_STATE_RUNNING)
316 total_size = info->fix.smem_len;
321 if (count > total_size) {
326 if (count + p > total_size) {
330 count = total_size - p;
333 dst = (void *)(info->screen_base + p);
335 if (copy_from_user(dst, buf, count))
341 par->update_all(par);
343 return (err) ? err : count;
346 static void auok190xfb_fillrect(struct fb_info *info,
347 const struct fb_fillrect *rect)
349 struct auok190xfb_par *par = info->par;
351 sys_fillrect(info, rect);
353 par->update_all(par);
356 static void auok190xfb_copyarea(struct fb_info *info,
357 const struct fb_copyarea *area)
359 struct auok190xfb_par *par = info->par;
361 sys_copyarea(info, area);
363 par->update_all(par);
366 static void auok190xfb_imageblit(struct fb_info *info,
367 const struct fb_image *image)
369 struct auok190xfb_par *par = info->par;
371 sys_imageblit(info, image);
373 par->update_all(par);
376 static int auok190xfb_check_var(struct fb_var_screeninfo *var,
377 struct fb_info *info)
379 if (info->var.xres != var->xres || info->var.yres != var->yres ||
380 info->var.xres_virtual != var->xres_virtual ||
381 info->var.yres_virtual != var->yres_virtual) {
382 pr_info("%s: Resolution not supported: X%u x Y%u\n",
383 __func__, var->xres, var->yres);
391 if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) {
392 pr_info("%s: Memory Limit requested yres_virtual = %u\n",
393 __func__, var->yres_virtual);
400 static struct fb_ops auok190xfb_ops = {
401 .owner = THIS_MODULE,
402 .fb_read = fb_sys_read,
403 .fb_write = auok190xfb_write,
404 .fb_fillrect = auok190xfb_fillrect,
405 .fb_copyarea = auok190xfb_copyarea,
406 .fb_imageblit = auok190xfb_imageblit,
407 .fb_check_var = auok190xfb_check_var,
411 * Controller-functions common to both K1900 and K1901
414 static int auok190x_read_temperature(struct auok190xfb_par *par)
416 struct device *dev = par->info->device;
420 pm_runtime_get_sync(dev);
422 mutex_lock(&(par->io_lock));
424 auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data);
426 mutex_unlock(&(par->io_lock));
428 pm_runtime_mark_last_busy(dev);
429 pm_runtime_put_autosuspend(dev);
431 /* sanitize and split of half-degrees for now */
432 temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1);
434 /* handle positive and negative temperatures */
436 return (255 - temp + 1) * (-1);
441 static void auok190x_identify(struct auok190xfb_par *par)
443 struct device *dev = par->info->device;
446 pm_runtime_get_sync(dev);
448 mutex_lock(&(par->io_lock));
450 auok190x_read_cmdargs(par, AUOK190X_CMD_READ_VERSION, 4, data);
452 mutex_unlock(&(par->io_lock));
454 par->epd_type = data[1] & AUOK190X_VERSION_TEMP_MASK;
456 par->panel_size_int = AUOK190X_VERSION_SIZE_INT(data[2]);
457 par->panel_size_float = AUOK190X_VERSION_SIZE_FLOAT(data[2]);
458 par->panel_model = AUOK190X_VERSION_MODEL(data[2]);
460 par->tcon_version = AUOK190X_VERSION_TCON(data[3]);
461 par->lut_version = AUOK190X_VERSION_LUT(data[3]);
463 dev_dbg(dev, "panel %d.%din, model 0x%x, EPD 0x%x TCON-rev 0x%x, LUT-rev 0x%x",
464 par->panel_size_int, par->panel_size_float, par->panel_model,
465 par->epd_type, par->tcon_version, par->lut_version);
467 pm_runtime_mark_last_busy(dev);
468 pm_runtime_put_autosuspend(dev);
475 static ssize_t update_mode_show(struct device *dev,
476 struct device_attribute *attr, char *buf)
478 struct fb_info *info = dev_get_drvdata(dev);
479 struct auok190xfb_par *par = info->par;
481 return sprintf(buf, "%d\n", par->update_mode);
484 static ssize_t update_mode_store(struct device *dev,
485 struct device_attribute *attr,
486 const char *buf, size_t count)
488 struct fb_info *info = dev_get_drvdata(dev);
489 struct auok190xfb_par *par = info->par;
492 ret = kstrtoint(buf, 10, &mode);
496 par->update_mode = mode;
498 /* if we enter a better mode, do a full update */
499 if (par->last_mode > 1 && mode < par->last_mode)
500 par->update_all(par);
505 static ssize_t flash_show(struct device *dev, struct device_attribute *attr,
508 struct fb_info *info = dev_get_drvdata(dev);
509 struct auok190xfb_par *par = info->par;
511 return sprintf(buf, "%d\n", par->flash);
514 static ssize_t flash_store(struct device *dev, struct device_attribute *attr,
515 const char *buf, size_t count)
517 struct fb_info *info = dev_get_drvdata(dev);
518 struct auok190xfb_par *par = info->par;
521 ret = kstrtoint(buf, 10, &flash);
533 static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
536 struct fb_info *info = dev_get_drvdata(dev);
537 struct auok190xfb_par *par = info->par;
540 temp = auok190x_read_temperature(par);
541 return sprintf(buf, "%d\n", temp);
544 static DEVICE_ATTR(update_mode, 0644, update_mode_show, update_mode_store);
545 static DEVICE_ATTR(flash, 0644, flash_show, flash_store);
546 static DEVICE_ATTR(temp, 0644, temp_show, NULL);
548 static struct attribute *auok190x_attributes[] = {
549 &dev_attr_update_mode.attr,
550 &dev_attr_flash.attr,
555 static const struct attribute_group auok190x_attr_group = {
556 .attrs = auok190x_attributes,
559 static int auok190x_power(struct auok190xfb_par *par, bool on)
561 struct auok190x_board *board = par->board;
565 /* We should maintain POWER up for at least 80ms before set
566 * RST_N and SLP_N to high (TCON spec 20100803_v35 p59)
568 ret = regulator_enable(par->regulator);
573 gpio_set_value(board->gpio_nrst, 1);
574 gpio_set_value(board->gpio_nsleep, 1);
577 regulator_disable(par->regulator);
578 gpio_set_value(board->gpio_nrst, 0);
579 gpio_set_value(board->gpio_nsleep, 0);
586 * Recovery - powercycle the controller
589 static void auok190x_recover(struct auok190xfb_par *par)
591 auok190x_power(par, 0);
593 auok190x_power(par, 1);
597 /* wait for init to complete */
598 par->board->wait_for_rdy(par);
606 static int auok190x_runtime_suspend(struct device *dev)
608 struct platform_device *pdev = to_platform_device(dev);
609 struct fb_info *info = platform_get_drvdata(pdev);
610 struct auok190xfb_par *par = info->par;
611 struct auok190x_board *board = par->board;
614 /* take and keep the lock until we are resumed, as the controller
615 * will never reach the non-busy state when in standby mode
617 mutex_lock(&(par->io_lock));
620 dev_warn(dev, "already in standby, runtime-pm pairing mismatch\n");
621 mutex_unlock(&(par->io_lock));
625 /* according to runtime_pm.txt runtime_suspend only means, that the
626 * device will not process data and will not communicate with the CPU
627 * As we hold the lock, this stays true even without standby
629 if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
630 dev_dbg(dev, "runtime suspend without standby\n");
632 } else if (board->quirks & AUOK190X_QUIRK_STANDBYPARAM) {
633 /* for some TCON versions STANDBY expects a parameter (0) but
634 * it seems the real tcon version has to be determined yet.
636 dev_dbg(dev, "runtime suspend with additional empty param\n");
638 auok190x_send_cmdargs(par, AUOK190X_CMD_STANDBY, 1,
641 dev_dbg(dev, "runtime suspend without param\n");
642 auok190x_send_command(par, AUOK190X_CMD_STANDBY);
653 static int auok190x_runtime_resume(struct device *dev)
655 struct platform_device *pdev = to_platform_device(dev);
656 struct fb_info *info = platform_get_drvdata(pdev);
657 struct auok190xfb_par *par = info->par;
658 struct auok190x_board *board = par->board;
661 dev_warn(dev, "not in standby, runtime-pm pairing mismatch\n");
665 if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
666 dev_dbg(dev, "runtime resume without standby\n");
668 /* when in standby, controller is always busy
669 * and only accepts the wakeup command
671 dev_dbg(dev, "runtime resume from standby\n");
672 auok190x_send_command_nowait(par, AUOK190X_CMD_WAKEUP);
676 /* wait for the controller to be ready and release the lock */
677 board->wait_for_rdy(par);
682 mutex_unlock(&(par->io_lock));
687 static int auok190x_suspend(struct device *dev)
689 struct platform_device *pdev = to_platform_device(dev);
690 struct fb_info *info = platform_get_drvdata(pdev);
691 struct auok190xfb_par *par = info->par;
692 struct auok190x_board *board = par->board;
695 dev_dbg(dev, "suspend\n");
696 if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
697 /* suspend via powering off the ic */
698 dev_dbg(dev, "suspend with broken standby\n");
700 auok190x_power(par, 0);
702 dev_dbg(dev, "suspend using sleep\n");
704 /* the sleep state can only be entered from the standby state.
705 * pm_runtime_get_noresume gets called before the suspend call.
706 * So the devices usage count is >0 but it is not necessarily
709 if (!pm_runtime_status_suspended(dev)) {
710 ret = auok190x_runtime_suspend(dev);
712 dev_err(dev, "auok190x_runtime_suspend failed with %d\n",
716 par->manual_standby = 1;
719 gpio_direction_output(board->gpio_nsleep, 0);
727 static int auok190x_resume(struct device *dev)
729 struct platform_device *pdev = to_platform_device(dev);
730 struct fb_info *info = platform_get_drvdata(pdev);
731 struct auok190xfb_par *par = info->par;
732 struct auok190x_board *board = par->board;
734 dev_dbg(dev, "resume\n");
735 if (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN) {
736 dev_dbg(dev, "resume with broken standby\n");
738 auok190x_power(par, 1);
742 dev_dbg(dev, "resume from sleep\n");
744 /* device should be in runtime suspend when we were suspended
745 * and pm_runtime_put_sync gets called after this function.
746 * So there is no need to touch the standby mode here at all.
748 gpio_direction_output(board->gpio_nsleep, 1);
751 /* an additional init call seems to be necessary after sleep */
752 auok190x_runtime_resume(dev);
755 /* if we were runtime-suspended before, suspend again*/
756 if (!par->manual_standby)
757 auok190x_runtime_suspend(dev);
759 par->manual_standby = 0;
766 const struct dev_pm_ops auok190x_pm = {
767 SET_RUNTIME_PM_OPS(auok190x_runtime_suspend, auok190x_runtime_resume,
769 SET_SYSTEM_SLEEP_PM_OPS(auok190x_suspend, auok190x_resume)
771 EXPORT_SYMBOL_GPL(auok190x_pm);
774 * Common probe and remove code
777 int auok190x_common_probe(struct platform_device *pdev,
778 struct auok190x_init_data *init)
780 struct auok190x_board *board = init->board;
781 struct auok190xfb_par *par;
782 struct fb_info *info;
783 struct panel_info *panel;
784 int videomemorysize, ret;
785 unsigned char *videomemory;
787 /* check board contents */
788 if (!board->init || !board->cleanup || !board->wait_for_rdy
789 || !board->set_ctl || !board->set_hdb || !board->get_hdb
790 || !board->setup_irq)
793 info = framebuffer_alloc(sizeof(struct auok190xfb_par), &pdev->dev);
800 par->recover = auok190x_recover;
801 par->update_partial = init->update_partial;
802 par->update_all = init->update_all;
803 par->need_refresh = init->need_refresh;
804 par->init = init->init;
806 /* init update modes */
808 par->update_mode = -1;
812 par->regulator = regulator_get(info->device, "vdd");
813 if (IS_ERR(par->regulator)) {
814 ret = PTR_ERR(par->regulator);
815 dev_err(info->device, "Failed to get regulator: %d\n", ret);
819 ret = board->init(par);
821 dev_err(info->device, "board init failed, %d\n", ret);
825 ret = gpio_request(board->gpio_nsleep, "AUOK190x sleep");
827 dev_err(info->device, "could not request sleep gpio, %d\n",
832 ret = gpio_direction_output(board->gpio_nsleep, 0);
834 dev_err(info->device, "could not set sleep gpio, %d\n", ret);
838 ret = gpio_request(board->gpio_nrst, "AUOK190x reset");
840 dev_err(info->device, "could not request reset gpio, %d\n",
845 ret = gpio_direction_output(board->gpio_nrst, 0);
847 dev_err(info->device, "could not set reset gpio, %d\n", ret);
851 ret = auok190x_power(par, 1);
853 dev_err(info->device, "could not power on the device, %d\n",
858 mutex_init(&par->io_lock);
860 init_waitqueue_head(&par->waitq);
862 ret = par->board->setup_irq(par->info);
864 dev_err(info->device, "could not setup ready-irq, %d\n", ret);
868 /* wait for init to complete */
869 par->board->wait_for_rdy(par);
872 * From here on the controller can talk to us
875 /* initialise fix, var, resolution and rotation */
877 strlcpy(info->fix.id, init->id, 16);
878 info->fix.type = FB_TYPE_PACKED_PIXELS;
879 info->fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
880 info->fix.xpanstep = 0;
881 info->fix.ypanstep = 0;
882 info->fix.ywrapstep = 0;
883 info->fix.accel = FB_ACCEL_NONE;
885 info->var.bits_per_pixel = 8;
886 info->var.grayscale = 1;
887 info->var.red.length = 8;
888 info->var.green.length = 8;
889 info->var.blue.length = 8;
891 panel = &panel_table[board->resolution];
893 /* if 90 degree rotation, switch width and height */
894 if (board->rotation & 1) {
895 info->var.xres = panel->h;
896 info->var.yres = panel->w;
897 info->var.xres_virtual = panel->h;
898 info->var.yres_virtual = panel->w;
899 info->fix.line_length = panel->h;
901 info->var.xres = panel->w;
902 info->var.yres = panel->h;
903 info->var.xres_virtual = panel->w;
904 info->var.yres_virtual = panel->h;
905 info->fix.line_length = panel->w;
908 par->resolution = board->resolution;
909 par->rotation = board->rotation;
911 /* videomemory handling */
913 videomemorysize = roundup((panel->w * panel->h), PAGE_SIZE);
914 videomemory = vmalloc(videomemorysize);
920 memset(videomemory, 0, videomemorysize);
921 info->screen_base = (char *)videomemory;
922 info->fix.smem_len = videomemorysize;
924 info->flags = FBINFO_FLAG_DEFAULT | FBINFO_VIRTFB;
925 info->fbops = &auok190xfb_ops;
927 /* deferred io init */
929 info->fbdefio = devm_kzalloc(info->device,
930 sizeof(struct fb_deferred_io),
932 if (!info->fbdefio) {
933 dev_err(info->device, "Failed to allocate memory\n");
938 dev_dbg(info->device, "targetting %d frames per second\n", board->fps);
939 info->fbdefio->delay = HZ / board->fps;
940 info->fbdefio->first_io = auok190xfb_dpy_first_io,
941 info->fbdefio->deferred_io = auok190xfb_dpy_deferred_io,
942 fb_deferred_io_init(info);
946 ret = fb_alloc_cmap(&info->cmap, 256, 0);
948 dev_err(info->device, "Failed to allocate colormap\n");
952 /* controller init */
954 par->consecutive_threshold = 100;
956 auok190x_identify(par);
958 platform_set_drvdata(pdev, info);
960 ret = register_framebuffer(info);
964 ret = sysfs_create_group(&info->device->kobj, &auok190x_attr_group);
968 dev_info(info->device, "fb%d: %dx%d using %dK of video memory\n",
969 info->node, info->var.xres, info->var.yres,
970 videomemorysize >> 10);
972 /* increase autosuspend_delay when we use alternative methods
975 par->autosuspend_delay = (board->quirks & AUOK190X_QUIRK_STANDBYBROKEN)
978 pm_runtime_set_active(info->device);
979 pm_runtime_enable(info->device);
980 pm_runtime_set_autosuspend_delay(info->device, par->autosuspend_delay);
981 pm_runtime_use_autosuspend(info->device);
986 unregister_framebuffer(info);
988 fb_dealloc_cmap(&info->cmap);
990 fb_deferred_io_cleanup(info);
992 vfree((void *)info->screen_base);
994 auok190x_power(par, 0);
996 gpio_free(board->gpio_nrst);
998 gpio_free(board->gpio_nsleep);
1000 board->cleanup(par);
1002 regulator_put(par->regulator);
1004 framebuffer_release(info);
1008 EXPORT_SYMBOL_GPL(auok190x_common_probe);
1010 int auok190x_common_remove(struct platform_device *pdev)
1012 struct fb_info *info = platform_get_drvdata(pdev);
1013 struct auok190xfb_par *par = info->par;
1014 struct auok190x_board *board = par->board;
1016 pm_runtime_disable(info->device);
1018 sysfs_remove_group(&info->device->kobj, &auok190x_attr_group);
1020 unregister_framebuffer(info);
1022 fb_dealloc_cmap(&info->cmap);
1024 fb_deferred_io_cleanup(info);
1026 vfree((void *)info->screen_base);
1028 auok190x_power(par, 0);
1030 gpio_free(board->gpio_nrst);
1031 gpio_free(board->gpio_nsleep);
1033 board->cleanup(par);
1035 regulator_put(par->regulator);
1037 framebuffer_release(info);
1041 EXPORT_SYMBOL_GPL(auok190x_common_remove);
1043 MODULE_DESCRIPTION("Common code for AUO-K190X controllers");
1044 MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
1045 MODULE_LICENSE("GPL");