2 * High-level sync()-related operations
5 #include <linux/kernel.h>
6 #include <linux/file.h>
8 #include <linux/slab.h>
9 #include <linux/export.h>
10 #include <linux/namei.h>
11 #include <linux/sched.h>
12 #include <linux/writeback.h>
13 #include <linux/syscalls.h>
14 #include <linux/linkage.h>
15 #include <linux/pagemap.h>
16 #include <linux/quotaops.h>
17 #include <linux/backing-dev.h>
20 #define VALID_FLAGS (SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE| \
21 SYNC_FILE_RANGE_WAIT_AFTER)
24 * Do the filesystem syncing work. For simple filesystems
25 * writeback_inodes_sb(sb) just dirties buffers with inodes so we have to
26 * submit IO for these buffers via __sync_blockdev(). This also speeds up the
27 * wait == 1 case since in that case write_inode() functions do
28 * sync_dirty_buffer() and thus effectively write one block at a time.
30 static int __sync_filesystem(struct super_block *sb, int wait)
33 * This should be safe, as we require bdi backing to actually
34 * write out data in the first place
36 if (sb->s_bdi == &noop_backing_dev_info)
39 if (sb->s_qcop && sb->s_qcop->quota_sync)
40 sb->s_qcop->quota_sync(sb, -1, wait);
45 writeback_inodes_sb(sb, WB_REASON_SYNC);
47 if (sb->s_op->sync_fs)
48 sb->s_op->sync_fs(sb, wait);
49 return __sync_blockdev(sb->s_bdev, wait);
53 * Write out and wait upon all dirty data associated with this
54 * superblock. Filesystem data as well as the underlying block
55 * device. Takes the superblock lock.
57 int sync_filesystem(struct super_block *sb)
62 * We need to be protected against the filesystem going from
63 * r/o to r/w or vice versa.
65 WARN_ON(!rwsem_is_locked(&sb->s_umount));
68 * No point in syncing out anything if the filesystem is read-only.
70 if (sb->s_flags & MS_RDONLY)
73 ret = __sync_filesystem(sb, 0);
76 return __sync_filesystem(sb, 1);
78 EXPORT_SYMBOL_GPL(sync_filesystem);
80 static void sync_one_sb(struct super_block *sb, void *arg)
82 if (!(sb->s_flags & MS_RDONLY))
83 __sync_filesystem(sb, *(int *)arg);
86 * Sync all the data for all the filesystems (called by sys_sync() and
89 static void sync_filesystems(int wait)
91 iterate_supers(sync_one_sb, &wait);
95 * sync everything. Start out by waking pdflush, because that writes back
96 * all queues in parallel.
100 wakeup_flusher_threads(0, WB_REASON_SYNC);
103 if (unlikely(laptop_mode))
104 laptop_sync_completion();
108 static void do_sync_work(struct work_struct *work)
111 * Sync twice to reduce the possibility we skipped some inodes / pages
112 * because they were temporarily locked
116 printk("Emergency Sync complete\n");
120 void emergency_sync(void)
122 struct work_struct *work;
124 work = kmalloc(sizeof(*work), GFP_ATOMIC);
126 INIT_WORK(work, do_sync_work);
132 * sync a single super
134 SYSCALL_DEFINE1(syncfs, int, fd)
137 struct super_block *sb;
141 file = fget_light(fd, &fput_needed);
144 sb = file->f_dentry->d_sb;
146 down_read(&sb->s_umount);
147 ret = sync_filesystem(sb);
148 up_read(&sb->s_umount);
150 fput_light(file, fput_needed);
155 * vfs_fsync_range - helper to sync a range of data & metadata to disk
156 * @file: file to sync
157 * @start: offset in bytes of the beginning of data range to sync
158 * @end: offset in bytes of the end of data range (inclusive)
159 * @datasync: perform only datasync
161 * Write back data in range @start..@end and metadata for @file to disk. If
162 * @datasync is set only metadata needed to access modified file data is
165 int vfs_fsync_range(struct file *file, loff_t start, loff_t end, int datasync)
167 if (!file->f_op || !file->f_op->fsync)
169 return file->f_op->fsync(file, start, end, datasync);
171 EXPORT_SYMBOL(vfs_fsync_range);
174 * vfs_fsync - perform a fsync or fdatasync on a file
175 * @file: file to sync
176 * @datasync: only perform a fdatasync operation
178 * Write back data and metadata for @file to disk. If @datasync is
179 * set only metadata needed to access modified file data is written.
181 int vfs_fsync(struct file *file, int datasync)
183 return vfs_fsync_range(file, 0, LLONG_MAX, datasync);
185 EXPORT_SYMBOL(vfs_fsync);
187 static int do_fsync(unsigned int fd, int datasync)
193 file = fget_light(fd, &fput_needed);
195 ret = vfs_fsync(file, datasync);
196 fput_light(file, fput_needed);
201 SYSCALL_DEFINE1(fsync, unsigned int, fd)
203 return do_fsync(fd, 0);
206 SYSCALL_DEFINE1(fdatasync, unsigned int, fd)
208 return do_fsync(fd, 1);
212 * generic_write_sync - perform syncing after a write if file / inode is sync
213 * @file: file to which the write happened
214 * @pos: offset where the write started
215 * @count: length of the write
217 * This is just a simple wrapper about our general syncing function.
219 int generic_write_sync(struct file *file, loff_t pos, loff_t count)
221 if (!(file->f_flags & O_DSYNC) && !IS_SYNC(file->f_mapping->host))
223 return vfs_fsync_range(file, pos, pos + count - 1,
224 (file->f_flags & __O_SYNC) ? 0 : 1);
226 EXPORT_SYMBOL(generic_write_sync);
229 * sys_sync_file_range() permits finely controlled syncing over a segment of
230 * a file in the range offset .. (offset+nbytes-1) inclusive. If nbytes is
231 * zero then sys_sync_file_range() will operate from offset out to EOF.
235 * SYNC_FILE_RANGE_WAIT_BEFORE: wait upon writeout of all pages in the range
236 * before performing the write.
238 * SYNC_FILE_RANGE_WRITE: initiate writeout of all those dirty pages in the
239 * range which are not presently under writeback. Note that this may block for
240 * significant periods due to exhaustion of disk request structures.
242 * SYNC_FILE_RANGE_WAIT_AFTER: wait upon writeout of all pages in the range
243 * after performing the write.
245 * Useful combinations of the flag bits are:
247 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE: ensures that all pages
248 * in the range which were dirty on entry to sys_sync_file_range() are placed
249 * under writeout. This is a start-write-for-data-integrity operation.
251 * SYNC_FILE_RANGE_WRITE: start writeout of all dirty pages in the range which
252 * are not presently under writeout. This is an asynchronous flush-to-disk
253 * operation. Not suitable for data integrity operations.
255 * SYNC_FILE_RANGE_WAIT_BEFORE (or SYNC_FILE_RANGE_WAIT_AFTER): wait for
256 * completion of writeout of all pages in the range. This will be used after an
257 * earlier SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE operation to wait
258 * for that operation to complete and to return the result.
260 * SYNC_FILE_RANGE_WAIT_BEFORE|SYNC_FILE_RANGE_WRITE|SYNC_FILE_RANGE_WAIT_AFTER:
261 * a traditional sync() operation. This is a write-for-data-integrity operation
262 * which will ensure that all pages in the range which were dirty on entry to
263 * sys_sync_file_range() are committed to disk.
266 * SYNC_FILE_RANGE_WAIT_BEFORE and SYNC_FILE_RANGE_WAIT_AFTER will detect any
267 * I/O errors or ENOSPC conditions and will return those to the caller, after
268 * clearing the EIO and ENOSPC flags in the address_space.
270 * It should be noted that none of these operations write out the file's
271 * metadata. So unless the application is strictly performing overwrites of
272 * already-instantiated disk blocks, there are no guarantees here that the data
273 * will be available after a crash.
275 SYSCALL_DEFINE(sync_file_range)(int fd, loff_t offset, loff_t nbytes,
280 struct address_space *mapping;
281 loff_t endbyte; /* inclusive */
286 if (flags & ~VALID_FLAGS)
289 endbyte = offset + nbytes;
293 if ((s64)endbyte < 0)
295 if (endbyte < offset)
298 if (sizeof(pgoff_t) == 4) {
299 if (offset >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
301 * The range starts outside a 32 bit machine's
302 * pagecache addressing capabilities. Let it "succeed"
307 if (endbyte >= (0x100000000ULL << PAGE_CACHE_SHIFT)) {
318 endbyte--; /* inclusive */
321 file = fget_light(fd, &fput_needed);
325 i_mode = file->f_path.dentry->d_inode->i_mode;
327 if (!S_ISREG(i_mode) && !S_ISBLK(i_mode) && !S_ISDIR(i_mode) &&
331 mapping = file->f_mapping;
338 if (flags & SYNC_FILE_RANGE_WAIT_BEFORE) {
339 ret = filemap_fdatawait_range(mapping, offset, endbyte);
344 if (flags & SYNC_FILE_RANGE_WRITE) {
345 ret = filemap_fdatawrite_range(mapping, offset, endbyte);
350 if (flags & SYNC_FILE_RANGE_WAIT_AFTER)
351 ret = filemap_fdatawait_range(mapping, offset, endbyte);
354 fput_light(file, fput_needed);
358 #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
359 asmlinkage long SyS_sync_file_range(long fd, loff_t offset, loff_t nbytes,
362 return SYSC_sync_file_range((int) fd, offset, nbytes,
363 (unsigned int) flags);
365 SYSCALL_ALIAS(sys_sync_file_range, SyS_sync_file_range);
368 /* It would be nice if people remember that not all the world's an i386
369 when they introduce new system calls */
370 SYSCALL_DEFINE(sync_file_range2)(int fd, unsigned int flags,
371 loff_t offset, loff_t nbytes)
373 return sys_sync_file_range(fd, offset, nbytes, flags);
375 #ifdef CONFIG_HAVE_SYSCALL_WRAPPERS
376 asmlinkage long SyS_sync_file_range2(long fd, long flags,
377 loff_t offset, loff_t nbytes)
379 return SYSC_sync_file_range2((int) fd, (unsigned int) flags,
382 SYSCALL_ALIAS(sys_sync_file_range2, SyS_sync_file_range2);