2 * TI clock drivers support
4 * Copyright (C) 2013 Texas Instruments, Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
10 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
11 * kind, whether express or implied; without even the implied warranty
12 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 #ifndef __LINUX_CLK_TI_H__
16 #define __LINUX_CLK_TI_H__
18 #include <linux/clkdev.h>
21 * struct dpll_data - DPLL registers and integration data
22 * @mult_div1_reg: register containing the DPLL M and N bitfields
23 * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
24 * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
25 * @clk_bypass: struct clk pointer to the clock's bypass clock input
26 * @clk_ref: struct clk pointer to the clock's reference clock input
27 * @control_reg: register containing the DPLL mode bitfield
28 * @enable_mask: mask of the DPLL mode bitfield in @control_reg
29 * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
30 * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
31 * @last_rounded_m4xen: cache of the last M4X result of
32 * omap4_dpll_regm4xen_round_rate()
33 * @last_rounded_lpmode: cache of the last lpmode result of
34 * omap4_dpll_lpmode_recalc()
35 * @max_multiplier: maximum valid non-bypass multiplier value (actual)
36 * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
37 * @min_divider: minimum valid non-bypass divider value (actual)
38 * @max_divider: maximum valid non-bypass divider value (actual)
39 * @modes: possible values of @enable_mask
40 * @autoidle_reg: register containing the DPLL autoidle mode bitfield
41 * @idlest_reg: register containing the DPLL idle status bitfield
42 * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
43 * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
44 * @dcc_mask: mask of the DPLL DCC correction bitfield @mult_div1_reg
45 * @dcc_rate: rate atleast which DCC @dcc_mask must be set
46 * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
47 * @lpmode_mask: mask of the DPLL low-power mode bitfield in @control_reg
48 * @m4xen_mask: mask of the DPLL M4X multiplier bitfield in @control_reg
49 * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
50 * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
51 * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
52 * @flags: DPLL type/features (see below)
54 * Possible values for @flags:
55 * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
57 * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
59 * XXX Some DPLLs have multiple bypass inputs, so it's not technically
60 * correct to only have one @clk_bypass pointer.
62 * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
63 * @last_rounded_n) should be separated from the runtime-fixed fields
64 * and placed into a different structure, so that the runtime-fixed data
65 * can be placed into read-only space.
68 void __iomem *mult_div1_reg;
71 struct clk *clk_bypass;
73 void __iomem *control_reg;
75 unsigned long last_rounded_rate;
77 u8 last_rounded_m4xen;
78 u8 last_rounded_lpmode;
84 void __iomem *autoidle_reg;
85 void __iomem *idlest_reg;
92 unsigned long dcc_rate;
104 * struct clk_hw_omap_ops - OMAP clk ops
105 * @find_idlest: find idlest register information for a clock
106 * @find_companion: find companion clock register information for a clock,
107 * basically converts CM_ICLKEN* <-> CM_FCLKEN*
108 * @allow_idle: enables autoidle hardware functionality for a clock
109 * @deny_idle: prevent autoidle hardware functionality for a clock
111 struct clk_hw_omap_ops {
112 void (*find_idlest)(struct clk_hw_omap *oclk,
113 void __iomem **idlest_reg,
114 u8 *idlest_bit, u8 *idlest_val);
115 void (*find_companion)(struct clk_hw_omap *oclk,
116 void __iomem **other_reg,
118 void (*allow_idle)(struct clk_hw_omap *oclk);
119 void (*deny_idle)(struct clk_hw_omap *oclk);
123 * struct clk_hw_omap - OMAP struct clk
124 * @node: list_head connecting this clock into the full clock list
125 * @enable_reg: register to write to enable the clock (see @enable_bit)
126 * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
127 * @flags: see "struct clk.flags possibilities" above
128 * @clksel_reg: for clksel clks, register va containing src/divisor select
129 * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
130 * @clksel: for clksel clks, pointer to struct clksel for this clock
131 * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
132 * @clkdm_name: clockdomain name that this clock is contained in
133 * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
134 * @ops: clock ops for this clock
138 struct list_head node;
139 unsigned long fixed_rate;
141 void __iomem *enable_reg;
144 void __iomem *clksel_reg;
146 const struct clksel *clksel;
147 struct dpll_data *dpll_data;
148 const char *clkdm_name;
149 struct clockdomain *clkdm;
150 const struct clk_hw_omap_ops *ops;
154 * struct clk_hw_omap.flags possibilities
156 * XXX document the rest of the clock flags here
158 * ENABLE_REG_32BIT: (OMAP1 only) clock control register must be accessed
159 * with 32bit ops, by default OMAP1 uses 16bit ops.
160 * CLOCK_IDLE_CONTROL: (OMAP1 only) clock has autoidle support.
161 * CLOCK_NO_IDLE_PARENT: (OMAP1 only) when clock is enabled, its parent
162 * clock is put to no-idle mode.
163 * ENABLE_ON_INIT: Clock is enabled on init.
164 * INVERT_ENABLE: By default, clock enable bit behavior is '1' enable, '0'
165 * disable. This inverts the behavior making '0' enable and '1' disable.
166 * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
167 * bits share the same register. This flag allows the
168 * omap4_dpllmx*() code to determine which GATE_CTRL bit field
169 * should be used. This is a temporary solution - a better approach
170 * would be to associate clock type-specific data with the clock,
171 * similar to the struct dpll_data approach.
172 * MEMMAP_ADDRESSING: Use memmap addressing to access clock registers.
174 #define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
175 #define CLOCK_IDLE_CONTROL (1 << 1)
176 #define CLOCK_NO_IDLE_PARENT (1 << 2)
177 #define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
178 #define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
179 #define CLOCK_CLKOUTX2 (1 << 5)
180 #define MEMMAP_ADDRESSING (1 << 6)
182 /* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
183 #define DPLL_LOW_POWER_STOP 0x1
184 #define DPLL_LOW_POWER_BYPASS 0x5
185 #define DPLL_LOCKED 0x7
187 /* DPLL Type and DCO Selection Flags */
188 #define DPLL_J_TYPE 0x1
190 /* Composite clock component types */
192 CLK_COMPONENT_TYPE_GATE = 0,
193 CLK_COMPONENT_TYPE_DIVIDER,
194 CLK_COMPONENT_TYPE_MUX,
195 CLK_COMPONENT_TYPE_MAX,
199 * struct ti_dt_clk - OMAP DT clock alias declarations
200 * @lk: clock lookup definition
201 * @node_name: clock DT node to map to
204 struct clk_lookup lk;
208 #define DT_CLK(dev, con, name) \
217 /* Maximum number of clock memmaps */
218 #define CLK_MAX_MEMMAPS 4
220 typedef void (*ti_of_clk_init_cb_t)(struct clk_hw *, struct device_node *);
223 * struct clk_omap_reg - OMAP register declaration
224 * @offset: offset from the master IP module base address
225 * @index: index of the master IP module
227 struct clk_omap_reg {
233 * struct ti_clk_ll_ops - low-level register access ops for a clock
234 * @clk_readl: pointer to register read function
235 * @clk_writel: pointer to register write function
237 * Low-level register access ops are generally used by the basic clock types
238 * (clk-gate, clk-mux, clk-divider etc.) to provide support for various
239 * low-level hardware interfaces (direct MMIO, regmap etc.), but can also be
240 * used by other hardware-specific clock drivers if needed.
242 struct ti_clk_ll_ops {
243 u32 (*clk_readl)(void __iomem *reg);
244 void (*clk_writel)(u32 val, void __iomem *reg);
247 extern struct ti_clk_ll_ops *ti_clk_ll_ops;
249 extern const struct clk_ops ti_clk_divider_ops;
250 extern const struct clk_ops ti_clk_mux_ops;
252 #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
254 void omap2_init_clk_hw_omap_clocks(struct clk *clk);
255 int omap3_noncore_dpll_enable(struct clk_hw *hw);
256 void omap3_noncore_dpll_disable(struct clk_hw *hw);
257 int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
258 int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
259 unsigned long parent_rate);
260 int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
262 unsigned long parent_rate,
264 long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
266 unsigned long *best_parent_rate,
267 struct clk **best_parent_clk);
268 unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
269 unsigned long parent_rate);
270 long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
271 unsigned long target_rate,
272 unsigned long *parent_rate);
273 long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
275 unsigned long *best_parent_rate,
276 struct clk **best_parent_clk);
277 u8 omap2_init_dpll_parent(struct clk_hw *hw);
278 unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
279 long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
280 unsigned long *parent_rate);
281 void omap2_init_clk_clkdm(struct clk_hw *clk);
282 unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw,
283 unsigned long parent_rate);
284 int omap3_clkoutx2_set_rate(struct clk_hw *hw, unsigned long rate,
285 unsigned long parent_rate);
286 long omap3_clkoutx2_round_rate(struct clk_hw *hw, unsigned long rate,
287 unsigned long *prate);
288 int omap2_clkops_enable_clkdm(struct clk_hw *hw);
289 void omap2_clkops_disable_clkdm(struct clk_hw *hw);
290 int omap2_clk_disable_autoidle_all(void);
291 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
292 int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
293 unsigned long parent_rate);
294 int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
295 unsigned long parent_rate, u8 index);
296 int omap2_dflt_clk_enable(struct clk_hw *hw);
297 void omap2_dflt_clk_disable(struct clk_hw *hw);
298 int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
299 void omap3_clk_lock_dpll5(void);
300 unsigned long omap2_dpllcore_recalc(struct clk_hw *hw,
301 unsigned long parent_rate);
302 int omap2_reprogram_dpllcore(struct clk_hw *clk, unsigned long rate,
303 unsigned long parent_rate);
304 void omap2xxx_clkt_dpllcore_init(struct clk_hw *hw);
305 void omap2xxx_clkt_vps_init(void);
307 void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
308 void ti_dt_clocks_register(struct ti_dt_clk *oclks);
309 void ti_dt_clk_init_provider(struct device_node *np, int index);
310 void ti_dt_clk_init_retry_clks(void);
311 void ti_dt_clockdomains_setup(void);
312 int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw,
313 ti_of_clk_init_cb_t func);
314 int of_ti_clk_autoidle_setup(struct device_node *node);
315 int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);
317 int omap3430_dt_clk_init(void);
318 int omap3630_dt_clk_init(void);
319 int am35xx_dt_clk_init(void);
320 int ti81xx_dt_clk_init(void);
321 int omap4xxx_dt_clk_init(void);
322 int omap5xxx_dt_clk_init(void);
323 int dra7xx_dt_clk_init(void);
324 int am33xx_dt_clk_init(void);
325 int am43xx_dt_clk_init(void);
326 int omap2420_dt_clk_init(void);
327 int omap2430_dt_clk_init(void);
330 void of_ti_clk_allow_autoidle_all(void);
331 void of_ti_clk_deny_autoidle_all(void);
333 static inline void of_ti_clk_allow_autoidle_all(void) { }
334 static inline void of_ti_clk_deny_autoidle_all(void) { }
337 extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll;
338 extern const struct clk_hw_omap_ops clkhwops_omap2430_i2chs_wait;
339 extern const struct clk_hw_omap_ops clkhwops_omap3_dpll;
340 extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx;
341 extern const struct clk_hw_omap_ops clkhwops_wait;
342 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait;
343 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait;
344 extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait;
345 extern const struct clk_hw_omap_ops clkhwops_iclk;
346 extern const struct clk_hw_omap_ops clkhwops_iclk_wait;
347 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait;
348 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait;
349 extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait;