1 //===-- llvm/Target/TargetLowering.h - Target Lowering Info -----*- C++ -*-===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file describes how to lower LLVM code to machine code. This has two
13 // 1. Which ValueTypes are natively supported by the target.
14 // 2. Which operations are supported for supported ValueTypes.
15 // 3. Cost thresholds for alternative implementations of certain operations.
17 // In addition it has a few other components, like information about FP
20 //===----------------------------------------------------------------------===//
22 #ifndef LLVM_TARGET_TARGETLOWERING_H
23 #define LLVM_TARGET_TARGETLOWERING_H
25 #include "llvm/ADT/DenseMap.h"
26 #include "llvm/CodeGen/DAGCombine.h"
27 #include "llvm/CodeGen/RuntimeLibcalls.h"
28 #include "llvm/CodeGen/SelectionDAGNodes.h"
29 #include "llvm/IR/Attributes.h"
30 #include "llvm/IR/CallingConv.h"
31 #include "llvm/IR/InlineAsm.h"
32 #include "llvm/Support/CallSite.h"
33 #include "llvm/Support/DebugLoc.h"
34 #include "llvm/Target/TargetCallingConv.h"
35 #include "llvm/Target/TargetMachine.h"
44 class FunctionLoweringInfo;
45 class ImmutableCallSite;
47 class MachineBasicBlock;
48 class MachineFunction;
50 class MachineJumpTableInfo;
53 template<typename T> class SmallVectorImpl;
55 class TargetRegisterClass;
56 class TargetLibraryInfo;
57 class TargetLoweringObjectFile;
62 None, // No preference
63 Source, // Follow source order.
64 RegPressure, // Scheduling for lowest register pressure.
65 Hybrid, // Scheduling for both latency and register pressure.
66 ILP, // Scheduling for ILP in low register pressure mode.
67 VLIW // Scheduling for VLIW targets.
71 /// TargetLoweringBase - This base class for TargetLowering contains the
72 /// SelectionDAG-independent parts that can be used from the rest of CodeGen.
73 class TargetLoweringBase {
74 TargetLoweringBase(const TargetLoweringBase&) LLVM_DELETED_FUNCTION;
75 void operator=(const TargetLoweringBase&) LLVM_DELETED_FUNCTION;
78 /// LegalizeAction - This enum indicates whether operations are valid for a
79 /// target, and if not, what action should be used to make them valid.
81 Legal, // The target natively supports this operation.
82 Promote, // This operation should be executed in a larger type.
83 Expand, // Try to expand this to other ops, otherwise use a libcall.
84 Custom // Use the LowerOperation hook to implement custom lowering.
87 /// LegalizeTypeAction - This enum indicates whether a types are legal for a
88 /// target, and if not, what action should be used to make them valid.
89 enum LegalizeTypeAction {
90 TypeLegal, // The target natively supports this type.
91 TypePromoteInteger, // Replace this integer with a larger one.
92 TypeExpandInteger, // Split this integer into two of half the size.
93 TypeSoftenFloat, // Convert this float to a same size integer type.
94 TypeExpandFloat, // Split this float into two of half the size.
95 TypeScalarizeVector, // Replace this one-element vector with its element.
96 TypeSplitVector, // Split this vector into two of half the size.
97 TypeWidenVector // This vector should be widened into a larger vector.
100 /// LegalizeKind holds the legalization kind that needs to happen to EVT
101 /// in order to type-legalize it.
102 typedef std::pair<LegalizeTypeAction, EVT> LegalizeKind;
104 enum BooleanContent { // How the target represents true/false values.
105 UndefinedBooleanContent, // Only bit 0 counts, the rest can hold garbage.
106 ZeroOrOneBooleanContent, // All bits zero except for bit 0.
107 ZeroOrNegativeOneBooleanContent // All bits equal to bit 0.
110 enum SelectSupportKind {
111 ScalarValSelect, // The target supports scalar selects (ex: cmov).
112 ScalarCondVectorVal, // The target supports selects with a scalar condition
113 // and vector values (ex: cmov).
114 VectorMaskSelect // The target supports vector selects with a vector
115 // mask (ex: x86 blends).
118 static ISD::NodeType getExtendForContent(BooleanContent Content) {
120 case UndefinedBooleanContent:
121 // Extend by adding rubbish bits.
122 return ISD::ANY_EXTEND;
123 case ZeroOrOneBooleanContent:
124 // Extend by adding zero bits.
125 return ISD::ZERO_EXTEND;
126 case ZeroOrNegativeOneBooleanContent:
127 // Extend by copying the sign bit.
128 return ISD::SIGN_EXTEND;
130 llvm_unreachable("Invalid content kind");
133 /// NOTE: The constructor takes ownership of TLOF.
134 explicit TargetLoweringBase(const TargetMachine &TM,
135 const TargetLoweringObjectFile *TLOF);
136 virtual ~TargetLoweringBase();
138 const TargetMachine &getTargetMachine() const { return TM; }
139 const DataLayout *getDataLayout() const { return TD; }
140 const TargetLoweringObjectFile &getObjFileLowering() const { return TLOF; }
142 bool isBigEndian() const { return !IsLittleEndian; }
143 bool isLittleEndian() const { return IsLittleEndian; }
144 // Return the pointer type for the given address space, defaults to
145 // the pointer type from the data layout.
146 // FIXME: The default needs to be removed once all the code is updated.
147 virtual MVT getPointerTy(uint32_t AS = 0) const { return PointerTy; }
148 virtual MVT getScalarShiftAmountTy(EVT LHSTy) const;
150 EVT getShiftAmountTy(EVT LHSTy) const;
152 /// isSelectExpensive - Return true if the select operation is expensive for
154 bool isSelectExpensive() const { return SelectIsExpensive; }
156 virtual bool isSelectSupported(SelectSupportKind kind) const { return true; }
158 /// shouldSplitVectorElementType - Return true if a vector of the given type
159 /// should be split (TypeSplitVector) instead of promoted
160 /// (TypePromoteInteger) during type legalization.
161 virtual bool shouldSplitVectorElementType(EVT VT) const { return false; }
163 /// isIntDivCheap() - Return true if integer divide is usually cheaper than
164 /// a sequence of several shifts, adds, and multiplies for this target.
165 bool isIntDivCheap() const { return IntDivIsCheap; }
167 /// isSlowDivBypassed - Returns true if target has indicated at least one
168 /// type should be bypassed.
169 bool isSlowDivBypassed() const { return !BypassSlowDivWidths.empty(); }
171 /// getBypassSlowDivTypes - Returns map of slow types for division or
172 /// remainder with corresponding fast types
173 const DenseMap<unsigned int, unsigned int> &getBypassSlowDivWidths() const {
174 return BypassSlowDivWidths;
177 /// isPow2DivCheap() - Return true if pow2 div is cheaper than a chain of
179 bool isPow2DivCheap() const { return Pow2DivIsCheap; }
181 /// isJumpExpensive() - Return true if Flow Control is an expensive operation
182 /// that should be avoided.
183 bool isJumpExpensive() const { return JumpIsExpensive; }
185 /// isPredictableSelectExpensive - Return true if selects are only cheaper
186 /// than branches if the branch is unlikely to be predicted right.
187 bool isPredictableSelectExpensive() const {
188 return PredictableSelectIsExpensive;
191 /// getSetCCResultType - Return the ValueType of the result of SETCC
192 /// operations. Also used to obtain the target's preferred type for
193 /// the condition operand of SELECT and BRCOND nodes. In the case of
194 /// BRCOND the argument passed is MVT::Other since there are no other
195 /// operands to get a type hint from.
196 virtual EVT getSetCCResultType(EVT VT) const;
198 /// getCmpLibcallReturnType - Return the ValueType for comparison
199 /// libcalls. Comparions libcalls include floating point comparion calls,
200 /// and Ordered/Unordered check calls on floating point numbers.
202 MVT::SimpleValueType getCmpLibcallReturnType() const;
204 /// getBooleanContents - For targets without i1 registers, this gives the
205 /// nature of the high-bits of boolean values held in types wider than i1.
206 /// "Boolean values" are special true/false values produced by nodes like
207 /// SETCC and consumed (as the condition) by nodes like SELECT and BRCOND.
208 /// Not to be confused with general values promoted from i1.
209 /// Some cpus distinguish between vectors of boolean and scalars; the isVec
210 /// parameter selects between the two kinds. For example on X86 a scalar
211 /// boolean should be zero extended from i1, while the elements of a vector
212 /// of booleans should be sign extended from i1.
213 BooleanContent getBooleanContents(bool isVec) const {
214 return isVec ? BooleanVectorContents : BooleanContents;
217 /// getSchedulingPreference - Return target scheduling preference.
218 Sched::Preference getSchedulingPreference() const {
219 return SchedPreferenceInfo;
222 /// getSchedulingPreference - Some scheduler, e.g. hybrid, can switch to
223 /// different scheduling heuristics for different nodes. This function returns
224 /// the preference (or none) for the given node.
225 virtual Sched::Preference getSchedulingPreference(SDNode *) const {
229 /// getRegClassFor - Return the register class that should be used for the
230 /// specified value type.
231 virtual const TargetRegisterClass *getRegClassFor(MVT VT) const {
232 const TargetRegisterClass *RC = RegClassForVT[VT.SimpleTy];
233 assert(RC && "This value type is not natively supported!");
237 /// getRepRegClassFor - Return the 'representative' register class for the
238 /// specified value type. The 'representative' register class is the largest
239 /// legal super-reg register class for the register class of the value type.
240 /// For example, on i386 the rep register class for i8, i16, and i32 are GR32;
241 /// while the rep register class is GR64 on x86_64.
242 virtual const TargetRegisterClass *getRepRegClassFor(MVT VT) const {
243 const TargetRegisterClass *RC = RepRegClassForVT[VT.SimpleTy];
247 /// getRepRegClassCostFor - Return the cost of the 'representative' register
248 /// class for the specified value type.
249 virtual uint8_t getRepRegClassCostFor(MVT VT) const {
250 return RepRegClassCostForVT[VT.SimpleTy];
253 /// isTypeLegal - Return true if the target has native support for the
254 /// specified value type. This means that it has a register that directly
255 /// holds it without promotions or expansions.
256 bool isTypeLegal(EVT VT) const {
257 assert(!VT.isSimple() ||
258 (unsigned)VT.getSimpleVT().SimpleTy < array_lengthof(RegClassForVT));
259 return VT.isSimple() && RegClassForVT[VT.getSimpleVT().SimpleTy] != 0;
262 class ValueTypeActionImpl {
263 /// ValueTypeActions - For each value type, keep a LegalizeTypeAction enum
264 /// that indicates how instruction selection should deal with the type.
265 uint8_t ValueTypeActions[MVT::LAST_VALUETYPE];
268 ValueTypeActionImpl() {
269 std::fill(ValueTypeActions, array_endof(ValueTypeActions), 0);
272 LegalizeTypeAction getTypeAction(MVT VT) const {
273 return (LegalizeTypeAction)ValueTypeActions[VT.SimpleTy];
276 void setTypeAction(MVT VT, LegalizeTypeAction Action) {
277 unsigned I = VT.SimpleTy;
278 ValueTypeActions[I] = Action;
282 const ValueTypeActionImpl &getValueTypeActions() const {
283 return ValueTypeActions;
286 /// getTypeAction - Return how we should legalize values of this type, either
287 /// it is already legal (return 'Legal') or we need to promote it to a larger
288 /// type (return 'Promote'), or we need to expand it into multiple registers
289 /// of smaller integer type (return 'Expand'). 'Custom' is not an option.
290 LegalizeTypeAction getTypeAction(LLVMContext &Context, EVT VT) const {
291 return getTypeConversion(Context, VT).first;
293 LegalizeTypeAction getTypeAction(MVT VT) const {
294 return ValueTypeActions.getTypeAction(VT);
297 /// getTypeToTransformTo - For types supported by the target, this is an
298 /// identity function. For types that must be promoted to larger types, this
299 /// returns the larger type to promote to. For integer types that are larger
300 /// than the largest integer register, this contains one step in the expansion
301 /// to get to the smaller register. For illegal floating point types, this
302 /// returns the integer type to transform to.
303 EVT getTypeToTransformTo(LLVMContext &Context, EVT VT) const {
304 return getTypeConversion(Context, VT).second;
307 /// getTypeToExpandTo - For types supported by the target, this is an
308 /// identity function. For types that must be expanded (i.e. integer types
309 /// that are larger than the largest integer register or illegal floating
310 /// point types), this returns the largest legal type it will be expanded to.
311 EVT getTypeToExpandTo(LLVMContext &Context, EVT VT) const {
312 assert(!VT.isVector());
314 switch (getTypeAction(Context, VT)) {
317 case TypeExpandInteger:
318 VT = getTypeToTransformTo(Context, VT);
321 llvm_unreachable("Type is not legal nor is it to be expanded!");
326 /// getVectorTypeBreakdown - Vector types are broken down into some number of
327 /// legal first class types. For example, EVT::v8f32 maps to 2 EVT::v4f32
328 /// with Altivec or SSE1, or 8 promoted EVT::f64 values with the X86 FP stack.
329 /// Similarly, EVT::v2i64 turns into 4 EVT::i32 values with both PPC and X86.
331 /// This method returns the number of registers needed, and the VT for each
332 /// register. It also returns the VT and quantity of the intermediate values
333 /// before they are promoted/expanded.
335 unsigned getVectorTypeBreakdown(LLVMContext &Context, EVT VT,
337 unsigned &NumIntermediates,
338 MVT &RegisterVT) const;
340 /// getTgtMemIntrinsic: Given an intrinsic, checks if on the target the
341 /// intrinsic will need to map to a MemIntrinsicNode (touches memory). If
342 /// this is the case, it returns true and store the intrinsic
343 /// information into the IntrinsicInfo that was passed to the function.
344 struct IntrinsicInfo {
345 unsigned opc; // target opcode
346 EVT memVT; // memory VT
347 const Value* ptrVal; // value representing memory location
348 int offset; // offset off of ptrVal
349 unsigned align; // alignment
350 bool vol; // is volatile?
351 bool readMem; // reads memory?
352 bool writeMem; // writes memory?
355 virtual bool getTgtMemIntrinsic(IntrinsicInfo &, const CallInst &,
356 unsigned /*Intrinsic*/) const {
360 /// isFPImmLegal - Returns true if the target can instruction select the
361 /// specified FP immediate natively. If false, the legalizer will materialize
362 /// the FP immediate as a load from a constant pool.
363 virtual bool isFPImmLegal(const APFloat &/*Imm*/, EVT /*VT*/) const {
367 /// isShuffleMaskLegal - Targets can use this to indicate that they only
368 /// support *some* VECTOR_SHUFFLE operations, those with specific masks.
369 /// By default, if a target supports the VECTOR_SHUFFLE node, all mask values
370 /// are assumed to be legal.
371 virtual bool isShuffleMaskLegal(const SmallVectorImpl<int> &/*Mask*/,
376 /// canOpTrap - Returns true if the operation can trap for the value type.
377 /// VT must be a legal type. By default, we optimistically assume most
378 /// operations don't trap except for divide and remainder.
379 virtual bool canOpTrap(unsigned Op, EVT VT) const;
381 /// isVectorClearMaskLegal - Similar to isShuffleMaskLegal. This is
382 /// used by Targets can use this to indicate if there is a suitable
383 /// VECTOR_SHUFFLE that can be used to replace a VAND with a constant
385 virtual bool isVectorClearMaskLegal(const SmallVectorImpl<int> &/*Mask*/,
390 /// getOperationAction - Return how this operation should be treated: either
391 /// it is legal, needs to be promoted to a larger size, needs to be
392 /// expanded to some other code sequence, or the target has a custom expander
394 LegalizeAction getOperationAction(unsigned Op, EVT VT) const {
395 if (VT.isExtended()) return Expand;
396 // If a target-specific SDNode requires legalization, require the target
397 // to provide custom legalization for it.
398 if (Op > array_lengthof(OpActions[0])) return Custom;
399 unsigned I = (unsigned) VT.getSimpleVT().SimpleTy;
400 return (LegalizeAction)OpActions[I][Op];
403 /// isOperationLegalOrCustom - Return true if the specified operation is
404 /// legal on this target or can be made legal with custom lowering. This
405 /// is used to help guide high-level lowering decisions.
406 bool isOperationLegalOrCustom(unsigned Op, EVT VT) const {
407 return (VT == MVT::Other || isTypeLegal(VT)) &&
408 (getOperationAction(Op, VT) == Legal ||
409 getOperationAction(Op, VT) == Custom);
412 /// isOperationLegalOrPromote - Return true if the specified operation is
413 /// legal on this target or can be made legal using promotion. This
414 /// is used to help guide high-level lowering decisions.
415 bool isOperationLegalOrPromote(unsigned Op, EVT VT) const {
416 return (VT == MVT::Other || isTypeLegal(VT)) &&
417 (getOperationAction(Op, VT) == Legal ||
418 getOperationAction(Op, VT) == Promote);
421 /// isOperationExpand - Return true if the specified operation is illegal on
422 /// this target or unlikely to be made legal with custom lowering. This is
423 /// used to help guide high-level lowering decisions.
424 bool isOperationExpand(unsigned Op, EVT VT) const {
425 return (!isTypeLegal(VT) || getOperationAction(Op, VT) == Expand);
428 /// isOperationLegal - Return true if the specified operation is legal on this
430 bool isOperationLegal(unsigned Op, EVT VT) const {
431 return (VT == MVT::Other || isTypeLegal(VT)) &&
432 getOperationAction(Op, VT) == Legal;
435 /// getLoadExtAction - Return how this load with extension should be treated:
436 /// either it is legal, needs to be promoted to a larger size, needs to be
437 /// expanded to some other code sequence, or the target has a custom expander
439 LegalizeAction getLoadExtAction(unsigned ExtType, MVT VT) const {
440 assert(ExtType < ISD::LAST_LOADEXT_TYPE && VT < MVT::LAST_VALUETYPE &&
441 "Table isn't big enough!");
442 return (LegalizeAction)LoadExtActions[VT.SimpleTy][ExtType];
445 /// isLoadExtLegal - Return true if the specified load with extension is legal
447 bool isLoadExtLegal(unsigned ExtType, EVT VT) const {
448 return VT.isSimple() &&
449 getLoadExtAction(ExtType, VT.getSimpleVT()) == Legal;
452 /// getTruncStoreAction - Return how this store with truncation should be
453 /// treated: either it is legal, needs to be promoted to a larger size, needs
454 /// to be expanded to some other code sequence, or the target has a custom
456 LegalizeAction getTruncStoreAction(MVT ValVT, MVT MemVT) const {
457 assert(ValVT < MVT::LAST_VALUETYPE && MemVT < MVT::LAST_VALUETYPE &&
458 "Table isn't big enough!");
459 return (LegalizeAction)TruncStoreActions[ValVT.SimpleTy]
463 /// isTruncStoreLegal - Return true if the specified store with truncation is
464 /// legal on this target.
465 bool isTruncStoreLegal(EVT ValVT, EVT MemVT) const {
466 return isTypeLegal(ValVT) && MemVT.isSimple() &&
467 getTruncStoreAction(ValVT.getSimpleVT(), MemVT.getSimpleVT()) == Legal;
470 /// getIndexedLoadAction - Return how the indexed load should be treated:
471 /// either it is legal, needs to be promoted to a larger size, needs to be
472 /// expanded to some other code sequence, or the target has a custom expander
475 getIndexedLoadAction(unsigned IdxMode, MVT VT) const {
476 assert(IdxMode < ISD::LAST_INDEXED_MODE && VT < MVT::LAST_VALUETYPE &&
477 "Table isn't big enough!");
478 unsigned Ty = (unsigned)VT.SimpleTy;
479 return (LegalizeAction)((IndexedModeActions[Ty][IdxMode] & 0xf0) >> 4);
482 /// isIndexedLoadLegal - Return true if the specified indexed load is legal
484 bool isIndexedLoadLegal(unsigned IdxMode, EVT VT) const {
485 return VT.isSimple() &&
486 (getIndexedLoadAction(IdxMode, VT.getSimpleVT()) == Legal ||
487 getIndexedLoadAction(IdxMode, VT.getSimpleVT()) == Custom);
490 /// getIndexedStoreAction - Return how the indexed store should be treated:
491 /// either it is legal, needs to be promoted to a larger size, needs to be
492 /// expanded to some other code sequence, or the target has a custom expander
495 getIndexedStoreAction(unsigned IdxMode, MVT VT) const {
496 assert(IdxMode < ISD::LAST_INDEXED_MODE && VT < MVT::LAST_VALUETYPE &&
497 "Table isn't big enough!");
498 unsigned Ty = (unsigned)VT.SimpleTy;
499 return (LegalizeAction)(IndexedModeActions[Ty][IdxMode] & 0x0f);
502 /// isIndexedStoreLegal - Return true if the specified indexed load is legal
504 bool isIndexedStoreLegal(unsigned IdxMode, EVT VT) const {
505 return VT.isSimple() &&
506 (getIndexedStoreAction(IdxMode, VT.getSimpleVT()) == Legal ||
507 getIndexedStoreAction(IdxMode, VT.getSimpleVT()) == Custom);
510 /// getCondCodeAction - Return how the condition code should be treated:
511 /// either it is legal, needs to be expanded to some other code sequence,
512 /// or the target has a custom expander for it.
514 getCondCodeAction(ISD::CondCode CC, MVT VT) const {
515 assert((unsigned)CC < array_lengthof(CondCodeActions) &&
516 (unsigned)VT.SimpleTy < sizeof(CondCodeActions[0])*4 &&
517 "Table isn't big enough!");
518 /// The lower 5 bits of the SimpleTy index into Nth 2bit set from the 64bit
519 /// value and the upper 27 bits index into the second dimension of the
520 /// array to select what 64bit value to use.
521 LegalizeAction Action = (LegalizeAction)
522 ((CondCodeActions[CC][VT.SimpleTy >> 5] >> (2*(VT.SimpleTy & 0x1F))) & 3);
523 assert(Action != Promote && "Can't promote condition code!");
527 /// isCondCodeLegal - Return true if the specified condition code is legal
529 bool isCondCodeLegal(ISD::CondCode CC, MVT VT) const {
531 getCondCodeAction(CC, VT) == Legal ||
532 getCondCodeAction(CC, VT) == Custom;
536 /// getTypeToPromoteTo - If the action for this operation is to promote, this
537 /// method returns the ValueType to promote to.
538 MVT getTypeToPromoteTo(unsigned Op, MVT VT) const {
539 assert(getOperationAction(Op, VT) == Promote &&
540 "This operation isn't promoted!");
542 // See if this has an explicit type specified.
543 std::map<std::pair<unsigned, MVT::SimpleValueType>,
544 MVT::SimpleValueType>::const_iterator PTTI =
545 PromoteToType.find(std::make_pair(Op, VT.SimpleTy));
546 if (PTTI != PromoteToType.end()) return PTTI->second;
548 assert((VT.isInteger() || VT.isFloatingPoint()) &&
549 "Cannot autopromote this type, add it with AddPromotedToType.");
553 NVT = (MVT::SimpleValueType)(NVT.SimpleTy+1);
554 assert(NVT.isInteger() == VT.isInteger() && NVT != MVT::isVoid &&
555 "Didn't find type to promote to!");
556 } while (!isTypeLegal(NVT) ||
557 getOperationAction(Op, NVT) == Promote);
561 /// getValueType - Return the EVT corresponding to this LLVM type.
562 /// This is fixed by the LLVM operations except for the pointer size. If
563 /// AllowUnknown is true, this will return MVT::Other for types with no EVT
564 /// counterpart (e.g. structs), otherwise it will assert.
565 EVT getValueType(Type *Ty, bool AllowUnknown = false) const {
566 // Lower scalar pointers to native pointer types.
567 if (Ty->isPointerTy()) return PointerTy;
569 if (Ty->isVectorTy()) {
570 VectorType *VTy = cast<VectorType>(Ty);
571 Type *Elm = VTy->getElementType();
572 // Lower vectors of pointers to native pointer types.
573 if (Elm->isPointerTy())
574 Elm = EVT(PointerTy).getTypeForEVT(Ty->getContext());
575 return EVT::getVectorVT(Ty->getContext(), EVT::getEVT(Elm, false),
576 VTy->getNumElements());
578 return EVT::getEVT(Ty, AllowUnknown);
581 /// Return the MVT corresponding to this LLVM type. See getValueType.
582 MVT getSimpleValueType(Type *Ty, bool AllowUnknown = false) const {
583 return getValueType(Ty, AllowUnknown).getSimpleVT();
586 /// getByValTypeAlignment - Return the desired alignment for ByVal aggregate
587 /// function arguments in the caller parameter area. This is the actual
588 /// alignment, not its logarithm.
589 virtual unsigned getByValTypeAlignment(Type *Ty) const;
591 /// getRegisterType - Return the type of registers that this ValueType will
592 /// eventually require.
593 MVT getRegisterType(MVT VT) const {
594 assert((unsigned)VT.SimpleTy < array_lengthof(RegisterTypeForVT));
595 return RegisterTypeForVT[VT.SimpleTy];
598 /// getRegisterType - Return the type of registers that this ValueType will
599 /// eventually require.
600 MVT getRegisterType(LLVMContext &Context, EVT VT) const {
602 assert((unsigned)VT.getSimpleVT().SimpleTy <
603 array_lengthof(RegisterTypeForVT));
604 return RegisterTypeForVT[VT.getSimpleVT().SimpleTy];
609 unsigned NumIntermediates;
610 (void)getVectorTypeBreakdown(Context, VT, VT1,
611 NumIntermediates, RegisterVT);
614 if (VT.isInteger()) {
615 return getRegisterType(Context, getTypeToTransformTo(Context, VT));
617 llvm_unreachable("Unsupported extended type!");
620 /// getNumRegisters - Return the number of registers that this ValueType will
621 /// eventually require. This is one for any types promoted to live in larger
622 /// registers, but may be more than one for types (like i64) that are split
623 /// into pieces. For types like i140, which are first promoted then expanded,
624 /// it is the number of registers needed to hold all the bits of the original
625 /// type. For an i140 on a 32 bit machine this means 5 registers.
626 unsigned getNumRegisters(LLVMContext &Context, EVT VT) const {
628 assert((unsigned)VT.getSimpleVT().SimpleTy <
629 array_lengthof(NumRegistersForVT));
630 return NumRegistersForVT[VT.getSimpleVT().SimpleTy];
635 unsigned NumIntermediates;
636 return getVectorTypeBreakdown(Context, VT, VT1, NumIntermediates, VT2);
638 if (VT.isInteger()) {
639 unsigned BitWidth = VT.getSizeInBits();
640 unsigned RegWidth = getRegisterType(Context, VT).getSizeInBits();
641 return (BitWidth + RegWidth - 1) / RegWidth;
643 llvm_unreachable("Unsupported extended type!");
646 /// ShouldShrinkFPConstant - If true, then instruction selection should
647 /// seek to shrink the FP constant of the specified type to a smaller type
648 /// in order to save space and / or reduce runtime.
649 virtual bool ShouldShrinkFPConstant(EVT) const { return true; }
651 /// hasTargetDAGCombine - If true, the target has custom DAG combine
652 /// transformations that it can perform for the specified node.
653 bool hasTargetDAGCombine(ISD::NodeType NT) const {
654 assert(unsigned(NT >> 3) < array_lengthof(TargetDAGCombineArray));
655 return TargetDAGCombineArray[NT >> 3] & (1 << (NT&7));
658 /// This function returns the maximum number of store operations permitted
659 /// to replace a call to llvm.memset. The value is set by the target at the
660 /// performance threshold for such a replacement. If OptSize is true,
661 /// return the limit for functions that have OptSize attribute.
662 /// @brief Get maximum # of store operations permitted for llvm.memset
663 unsigned getMaxStoresPerMemset(bool OptSize) const {
664 return OptSize ? MaxStoresPerMemsetOptSize : MaxStoresPerMemset;
667 /// This function returns the maximum number of store operations permitted
668 /// to replace a call to llvm.memcpy. The value is set by the target at the
669 /// performance threshold for such a replacement. If OptSize is true,
670 /// return the limit for functions that have OptSize attribute.
671 /// @brief Get maximum # of store operations permitted for llvm.memcpy
672 unsigned getMaxStoresPerMemcpy(bool OptSize) const {
673 return OptSize ? MaxStoresPerMemcpyOptSize : MaxStoresPerMemcpy;
676 /// This function returns the maximum number of store operations permitted
677 /// to replace a call to llvm.memmove. The value is set by the target at the
678 /// performance threshold for such a replacement. If OptSize is true,
679 /// return the limit for functions that have OptSize attribute.
680 /// @brief Get maximum # of store operations permitted for llvm.memmove
681 unsigned getMaxStoresPerMemmove(bool OptSize) const {
682 return OptSize ? MaxStoresPerMemmoveOptSize : MaxStoresPerMemmove;
685 /// This function returns true if the target allows unaligned memory accesses.
686 /// of the specified type. If true, it also returns whether the unaligned
687 /// memory access is "fast" in the second argument by reference. This is used,
688 /// for example, in situations where an array copy/move/set is converted to a
689 /// sequence of store operations. It's use helps to ensure that such
690 /// replacements don't generate code that causes an alignment error (trap) on
691 /// the target machine.
692 /// @brief Determine if the target supports unaligned memory accesses.
693 virtual bool allowsUnalignedMemoryAccesses(EVT, bool *Fast = 0) const {
697 /// This function returns true if the target would benefit from code placement
699 /// @brief Determine if the target should perform code placement optimization.
700 bool shouldOptimizeCodePlacement() const {
701 return BenefitFromCodePlacementOpt;
704 /// getOptimalMemOpType - Returns the target specific optimal type for load
705 /// and store operations as a result of memset, memcpy, and memmove
706 /// lowering. If DstAlign is zero that means it's safe to destination
707 /// alignment can satisfy any constraint. Similarly if SrcAlign is zero it
708 /// means there isn't a need to check it against alignment requirement,
709 /// probably because the source does not need to be loaded. If 'IsMemset' is
710 /// true, that means it's expanding a memset. If 'ZeroMemset' is true, that
711 /// means it's a memset of zero. 'MemcpyStrSrc' indicates whether the memcpy
712 /// source is constant so it does not need to be loaded.
713 /// It returns EVT::Other if the type should be determined using generic
714 /// target-independent logic.
715 virtual EVT getOptimalMemOpType(uint64_t /*Size*/,
716 unsigned /*DstAlign*/, unsigned /*SrcAlign*/,
719 bool /*MemcpyStrSrc*/,
720 MachineFunction &/*MF*/) const {
724 /// isSafeMemOpType - Returns true if it's safe to use load / store of the
725 /// specified type to expand memcpy / memset inline. This is mostly true
726 /// for all types except for some special cases. For example, on X86
727 /// targets without SSE2 f64 load / store are done with fldl / fstpl which
728 /// also does type conversion. Note the specified type doesn't have to be
729 /// legal as the hook is used before type legalization.
730 virtual bool isSafeMemOpType(MVT VT) const {
734 /// usesUnderscoreSetJmp - Determine if we should use _setjmp or setjmp
735 /// to implement llvm.setjmp.
736 bool usesUnderscoreSetJmp() const {
737 return UseUnderscoreSetJmp;
740 /// usesUnderscoreLongJmp - Determine if we should use _longjmp or longjmp
741 /// to implement llvm.longjmp.
742 bool usesUnderscoreLongJmp() const {
743 return UseUnderscoreLongJmp;
746 /// supportJumpTables - return whether the target can generate code for
748 bool supportJumpTables() const {
749 return SupportJumpTables;
752 /// getMinimumJumpTableEntries - return integer threshold on number of
753 /// blocks to use jump tables rather than if sequence.
754 int getMinimumJumpTableEntries() const {
755 return MinimumJumpTableEntries;
758 /// getStackPointerRegisterToSaveRestore - If a physical register, this
759 /// specifies the register that llvm.savestack/llvm.restorestack should save
761 unsigned getStackPointerRegisterToSaveRestore() const {
762 return StackPointerRegisterToSaveRestore;
765 /// getExceptionPointerRegister - If a physical register, this returns
766 /// the register that receives the exception address on entry to a landing
768 unsigned getExceptionPointerRegister() const {
769 return ExceptionPointerRegister;
772 /// getExceptionSelectorRegister - If a physical register, this returns
773 /// the register that receives the exception typeid on entry to a landing
775 unsigned getExceptionSelectorRegister() const {
776 return ExceptionSelectorRegister;
779 /// getJumpBufSize - returns the target's jmp_buf size in bytes (if never
780 /// set, the default is 200)
781 unsigned getJumpBufSize() const {
785 /// getJumpBufAlignment - returns the target's jmp_buf alignment in bytes
786 /// (if never set, the default is 0)
787 unsigned getJumpBufAlignment() const {
788 return JumpBufAlignment;
791 /// getMinStackArgumentAlignment - return the minimum stack alignment of an
793 unsigned getMinStackArgumentAlignment() const {
794 return MinStackArgumentAlignment;
797 /// getMinFunctionAlignment - return the minimum function alignment.
799 unsigned getMinFunctionAlignment() const {
800 return MinFunctionAlignment;
803 /// getPrefFunctionAlignment - return the preferred function alignment.
805 unsigned getPrefFunctionAlignment() const {
806 return PrefFunctionAlignment;
809 /// getPrefLoopAlignment - return the preferred loop alignment.
811 unsigned getPrefLoopAlignment() const {
812 return PrefLoopAlignment;
815 /// getShouldFoldAtomicFences - return whether the combiner should fold
816 /// fence MEMBARRIER instructions into the atomic intrinsic instructions.
818 bool getShouldFoldAtomicFences() const {
819 return ShouldFoldAtomicFences;
822 /// getInsertFencesFor - return whether the DAG builder should automatically
823 /// insert fences and reduce ordering for atomics.
825 bool getInsertFencesForAtomic() const {
826 return InsertFencesForAtomic;
829 /// getStackCookieLocation - Return true if the target stores stack
830 /// protector cookies at a fixed offset in some non-standard address
831 /// space, and populates the address space and offset as
833 virtual bool getStackCookieLocation(unsigned &/*AddressSpace*/,
834 unsigned &/*Offset*/) const {
838 /// getMaximalGlobalOffset - Returns the maximal possible offset which can be
839 /// used for loads / stores from the global.
840 virtual unsigned getMaximalGlobalOffset() const {
844 //===--------------------------------------------------------------------===//
845 /// \name Helpers for TargetTransformInfo implementations
848 /// Get the ISD node that corresponds to the Instruction class opcode.
849 int InstructionOpcodeToISD(unsigned Opcode) const;
851 /// Estimate the cost of type-legalization and the legalized type.
852 std::pair<unsigned, MVT> getTypeLegalizationCost(Type *Ty) const;
856 //===--------------------------------------------------------------------===//
857 // TargetLowering Configuration Methods - These methods should be invoked by
858 // the derived class constructor to configure this object for the target.
862 /// setBooleanContents - Specify how the target extends the result of a
863 /// boolean value from i1 to a wider type. See getBooleanContents.
864 void setBooleanContents(BooleanContent Ty) { BooleanContents = Ty; }
865 /// setBooleanVectorContents - Specify how the target extends the result
866 /// of a vector boolean value from a vector of i1 to a wider type. See
867 /// getBooleanContents.
868 void setBooleanVectorContents(BooleanContent Ty) {
869 BooleanVectorContents = Ty;
872 /// setSchedulingPreference - Specify the target scheduling preference.
873 void setSchedulingPreference(Sched::Preference Pref) {
874 SchedPreferenceInfo = Pref;
877 /// setUseUnderscoreSetJmp - Indicate whether this target prefers to
878 /// use _setjmp to implement llvm.setjmp or the non _ version.
879 /// Defaults to false.
880 void setUseUnderscoreSetJmp(bool Val) {
881 UseUnderscoreSetJmp = Val;
884 /// setUseUnderscoreLongJmp - Indicate whether this target prefers to
885 /// use _longjmp to implement llvm.longjmp or the non _ version.
886 /// Defaults to false.
887 void setUseUnderscoreLongJmp(bool Val) {
888 UseUnderscoreLongJmp = Val;
891 /// setSupportJumpTables - Indicate whether the target can generate code for
893 void setSupportJumpTables(bool Val) {
894 SupportJumpTables = Val;
897 /// setMinimumJumpTableEntries - Indicate the number of blocks to generate
898 /// jump tables rather than if sequence.
899 void setMinimumJumpTableEntries(int Val) {
900 MinimumJumpTableEntries = Val;
903 /// setStackPointerRegisterToSaveRestore - If set to a physical register, this
904 /// specifies the register that llvm.savestack/llvm.restorestack should save
906 void setStackPointerRegisterToSaveRestore(unsigned R) {
907 StackPointerRegisterToSaveRestore = R;
910 /// setExceptionPointerRegister - If set to a physical register, this sets
911 /// the register that receives the exception address on entry to a landing
913 void setExceptionPointerRegister(unsigned R) {
914 ExceptionPointerRegister = R;
917 /// setExceptionSelectorRegister - If set to a physical register, this sets
918 /// the register that receives the exception typeid on entry to a landing
920 void setExceptionSelectorRegister(unsigned R) {
921 ExceptionSelectorRegister = R;
924 /// SelectIsExpensive - Tells the code generator not to expand operations
925 /// into sequences that use the select operations if possible.
926 void setSelectIsExpensive(bool isExpensive = true) {
927 SelectIsExpensive = isExpensive;
930 /// JumpIsExpensive - Tells the code generator not to expand sequence of
931 /// operations into a separate sequences that increases the amount of
933 void setJumpIsExpensive(bool isExpensive = true) {
934 JumpIsExpensive = isExpensive;
937 /// setIntDivIsCheap - Tells the code generator that integer divide is
938 /// expensive, and if possible, should be replaced by an alternate sequence
939 /// of instructions not containing an integer divide.
940 void setIntDivIsCheap(bool isCheap = true) { IntDivIsCheap = isCheap; }
942 /// addBypassSlowDiv - Tells the code generator which bitwidths to bypass.
943 void addBypassSlowDiv(unsigned int SlowBitWidth, unsigned int FastBitWidth) {
944 BypassSlowDivWidths[SlowBitWidth] = FastBitWidth;
947 /// setPow2DivIsCheap - Tells the code generator that it shouldn't generate
948 /// srl/add/sra for a signed divide by power of two, and let the target handle
950 void setPow2DivIsCheap(bool isCheap = true) { Pow2DivIsCheap = isCheap; }
952 /// addRegisterClass - Add the specified register class as an available
953 /// regclass for the specified value type. This indicates the selector can
954 /// handle values of that class natively.
955 void addRegisterClass(MVT VT, const TargetRegisterClass *RC) {
956 assert((unsigned)VT.SimpleTy < array_lengthof(RegClassForVT));
957 AvailableRegClasses.push_back(std::make_pair(VT, RC));
958 RegClassForVT[VT.SimpleTy] = RC;
961 /// findRepresentativeClass - Return the largest legal super-reg register class
962 /// of the register class for the specified type and its associated "cost".
963 virtual std::pair<const TargetRegisterClass*, uint8_t>
964 findRepresentativeClass(MVT VT) const;
966 /// computeRegisterProperties - Once all of the register classes are added,
967 /// this allows us to compute derived properties we expose.
968 void computeRegisterProperties();
970 /// setOperationAction - Indicate that the specified operation does not work
971 /// with the specified type and indicate what to do about it.
972 void setOperationAction(unsigned Op, MVT VT,
973 LegalizeAction Action) {
974 assert(Op < array_lengthof(OpActions[0]) && "Table isn't big enough!");
975 OpActions[(unsigned)VT.SimpleTy][Op] = (uint8_t)Action;
978 /// setLoadExtAction - Indicate that the specified load with extension does
979 /// not work with the specified type and indicate what to do about it.
980 void setLoadExtAction(unsigned ExtType, MVT VT,
981 LegalizeAction Action) {
982 assert(ExtType < ISD::LAST_LOADEXT_TYPE && VT < MVT::LAST_VALUETYPE &&
983 "Table isn't big enough!");
984 LoadExtActions[VT.SimpleTy][ExtType] = (uint8_t)Action;
987 /// setTruncStoreAction - Indicate that the specified truncating store does
988 /// not work with the specified type and indicate what to do about it.
989 void setTruncStoreAction(MVT ValVT, MVT MemVT,
990 LegalizeAction Action) {
991 assert(ValVT < MVT::LAST_VALUETYPE && MemVT < MVT::LAST_VALUETYPE &&
992 "Table isn't big enough!");
993 TruncStoreActions[ValVT.SimpleTy][MemVT.SimpleTy] = (uint8_t)Action;
996 /// setIndexedLoadAction - Indicate that the specified indexed load does or
997 /// does not work with the specified type and indicate what to do abort
998 /// it. NOTE: All indexed mode loads are initialized to Expand in
999 /// TargetLowering.cpp
1000 void setIndexedLoadAction(unsigned IdxMode, MVT VT,
1001 LegalizeAction Action) {
1002 assert(VT < MVT::LAST_VALUETYPE && IdxMode < ISD::LAST_INDEXED_MODE &&
1003 (unsigned)Action < 0xf && "Table isn't big enough!");
1004 // Load action are kept in the upper half.
1005 IndexedModeActions[(unsigned)VT.SimpleTy][IdxMode] &= ~0xf0;
1006 IndexedModeActions[(unsigned)VT.SimpleTy][IdxMode] |= ((uint8_t)Action) <<4;
1009 /// setIndexedStoreAction - Indicate that the specified indexed store does or
1010 /// does not work with the specified type and indicate what to do about
1011 /// it. NOTE: All indexed mode stores are initialized to Expand in
1012 /// TargetLowering.cpp
1013 void setIndexedStoreAction(unsigned IdxMode, MVT VT,
1014 LegalizeAction Action) {
1015 assert(VT < MVT::LAST_VALUETYPE && IdxMode < ISD::LAST_INDEXED_MODE &&
1016 (unsigned)Action < 0xf && "Table isn't big enough!");
1017 // Store action are kept in the lower half.
1018 IndexedModeActions[(unsigned)VT.SimpleTy][IdxMode] &= ~0x0f;
1019 IndexedModeActions[(unsigned)VT.SimpleTy][IdxMode] |= ((uint8_t)Action);
1022 /// setCondCodeAction - Indicate that the specified condition code is or isn't
1023 /// supported on the target and indicate what to do about it.
1024 void setCondCodeAction(ISD::CondCode CC, MVT VT,
1025 LegalizeAction Action) {
1026 assert(VT < MVT::LAST_VALUETYPE &&
1027 (unsigned)CC < array_lengthof(CondCodeActions) &&
1028 "Table isn't big enough!");
1029 /// The lower 5 bits of the SimpleTy index into Nth 2bit set from the 64bit
1030 /// value and the upper 27 bits index into the second dimension of the
1031 /// array to select what 64bit value to use.
1032 CondCodeActions[(unsigned)CC][VT.SimpleTy >> 5]
1033 &= ~(uint64_t(3UL) << (VT.SimpleTy & 0x1F)*2);
1034 CondCodeActions[(unsigned)CC][VT.SimpleTy >> 5]
1035 |= (uint64_t)Action << (VT.SimpleTy & 0x1F)*2;
1038 /// AddPromotedToType - If Opc/OrigVT is specified as being promoted, the
1039 /// promotion code defaults to trying a larger integer/fp until it can find
1040 /// one that works. If that default is insufficient, this method can be used
1041 /// by the target to override the default.
1042 void AddPromotedToType(unsigned Opc, MVT OrigVT, MVT DestVT) {
1043 PromoteToType[std::make_pair(Opc, OrigVT.SimpleTy)] = DestVT.SimpleTy;
1046 /// setTargetDAGCombine - Targets should invoke this method for each target
1047 /// independent node that they want to provide a custom DAG combiner for by
1048 /// implementing the PerformDAGCombine virtual method.
1049 void setTargetDAGCombine(ISD::NodeType NT) {
1050 assert(unsigned(NT >> 3) < array_lengthof(TargetDAGCombineArray));
1051 TargetDAGCombineArray[NT >> 3] |= 1 << (NT&7);
1054 /// setJumpBufSize - Set the target's required jmp_buf buffer size (in
1055 /// bytes); default is 200
1056 void setJumpBufSize(unsigned Size) {
1060 /// setJumpBufAlignment - Set the target's required jmp_buf buffer
1061 /// alignment (in bytes); default is 0
1062 void setJumpBufAlignment(unsigned Align) {
1063 JumpBufAlignment = Align;
1066 /// setMinFunctionAlignment - Set the target's minimum function alignment (in
1068 void setMinFunctionAlignment(unsigned Align) {
1069 MinFunctionAlignment = Align;
1072 /// setPrefFunctionAlignment - Set the target's preferred function alignment.
1073 /// This should be set if there is a performance benefit to
1074 /// higher-than-minimum alignment (in log2(bytes))
1075 void setPrefFunctionAlignment(unsigned Align) {
1076 PrefFunctionAlignment = Align;
1079 /// setPrefLoopAlignment - Set the target's preferred loop alignment. Default
1080 /// alignment is zero, it means the target does not care about loop alignment.
1081 /// The alignment is specified in log2(bytes).
1082 void setPrefLoopAlignment(unsigned Align) {
1083 PrefLoopAlignment = Align;
1086 /// setMinStackArgumentAlignment - Set the minimum stack alignment of an
1087 /// argument (in log2(bytes)).
1088 void setMinStackArgumentAlignment(unsigned Align) {
1089 MinStackArgumentAlignment = Align;
1092 /// setShouldFoldAtomicFences - Set if the target's implementation of the
1093 /// atomic operation intrinsics includes locking. Default is false.
1094 void setShouldFoldAtomicFences(bool fold) {
1095 ShouldFoldAtomicFences = fold;
1098 /// setInsertFencesForAtomic - Set if the DAG builder should
1099 /// automatically insert fences and reduce the order of atomic memory
1100 /// operations to Monotonic.
1101 void setInsertFencesForAtomic(bool fence) {
1102 InsertFencesForAtomic = fence;
1106 //===--------------------------------------------------------------------===//
1107 // Addressing mode description hooks (used by LSR etc).
1110 /// GetAddrModeArguments - CodeGenPrepare sinks address calculations into the
1111 /// same BB as Load/Store instructions reading the address. This allows as
1112 /// much computation as possible to be done in the address mode for that
1113 /// operand. This hook lets targets also pass back when this should be done
1114 /// on intrinsics which load/store.
1115 virtual bool GetAddrModeArguments(IntrinsicInst *I,
1116 SmallVectorImpl<Value*> &Ops,
1117 Type *&AccessTy) const {
1121 /// AddrMode - This represents an addressing mode of:
1122 /// BaseGV + BaseOffs + BaseReg + Scale*ScaleReg
1123 /// If BaseGV is null, there is no BaseGV.
1124 /// If BaseOffs is zero, there is no base offset.
1125 /// If HasBaseReg is false, there is no base register.
1126 /// If Scale is zero, there is no ScaleReg. Scale of 1 indicates a reg with
1130 GlobalValue *BaseGV;
1134 AddrMode() : BaseGV(0), BaseOffs(0), HasBaseReg(false), Scale(0) {}
1137 /// isLegalAddressingMode - Return true if the addressing mode represented by
1138 /// AM is legal for this target, for a load/store of the specified type.
1139 /// The type may be VoidTy, in which case only return true if the addressing
1140 /// mode is legal for a load/store of any legal type.
1141 /// TODO: Handle pre/postinc as well.
1142 virtual bool isLegalAddressingMode(const AddrMode &AM, Type *Ty) const;
1144 /// isLegalICmpImmediate - Return true if the specified immediate is legal
1145 /// icmp immediate, that is the target has icmp instructions which can compare
1146 /// a register against the immediate without having to materialize the
1147 /// immediate into a register.
1148 virtual bool isLegalICmpImmediate(int64_t) const {
1152 /// isLegalAddImmediate - Return true if the specified immediate is legal
1153 /// add immediate, that is the target has add instructions which can add
1154 /// a register with the immediate without having to materialize the
1155 /// immediate into a register.
1156 virtual bool isLegalAddImmediate(int64_t) const {
1160 /// isTruncateFree - Return true if it's free to truncate a value of
1161 /// type Ty1 to type Ty2. e.g. On x86 it's free to truncate a i32 value in
1162 /// register EAX to i16 by referencing its sub-register AX.
1163 virtual bool isTruncateFree(Type * /*Ty1*/, Type * /*Ty2*/) const {
1167 virtual bool isTruncateFree(EVT /*VT1*/, EVT /*VT2*/) const {
1171 /// isZExtFree - Return true if any actual instruction that defines a
1172 /// value of type Ty1 implicitly zero-extends the value to Ty2 in the result
1173 /// register. This does not necessarily include registers defined in
1174 /// unknown ways, such as incoming arguments, or copies from unknown
1175 /// virtual registers. Also, if isTruncateFree(Ty2, Ty1) is true, this
1176 /// does not necessarily apply to truncate instructions. e.g. on x86-64,
1177 /// all instructions that define 32-bit values implicit zero-extend the
1178 /// result out to 64 bits.
1179 virtual bool isZExtFree(Type * /*Ty1*/, Type * /*Ty2*/) const {
1183 virtual bool isZExtFree(EVT /*VT1*/, EVT /*VT2*/) const {
1187 /// isZExtFree - Return true if zero-extending the specific node Val to type
1188 /// VT2 is free (either because it's implicitly zero-extended such as ARM
1189 /// ldrb / ldrh or because it's folded such as X86 zero-extending loads).
1190 virtual bool isZExtFree(SDValue Val, EVT VT2) const {
1191 return isZExtFree(Val.getValueType(), VT2);
1194 /// isFNegFree - Return true if an fneg operation is free to the point where
1195 /// it is never worthwhile to replace it with a bitwise operation.
1196 virtual bool isFNegFree(EVT) const {
1200 /// isFAbsFree - Return true if an fneg operation is free to the point where
1201 /// it is never worthwhile to replace it with a bitwise operation.
1202 virtual bool isFAbsFree(EVT) const {
1206 /// isFMAFasterThanMulAndAdd - Return true if an FMA operation is faster than
1207 /// a pair of mul and add instructions. fmuladd intrinsics will be expanded to
1208 /// FMAs when this method returns true (and FMAs are legal), otherwise fmuladd
1209 /// is expanded to mul + add.
1210 virtual bool isFMAFasterThanMulAndAdd(EVT) const {
1214 /// isNarrowingProfitable - Return true if it's profitable to narrow
1215 /// operations of type VT1 to VT2. e.g. on x86, it's profitable to narrow
1216 /// from i32 to i8 but not from i32 to i16.
1217 virtual bool isNarrowingProfitable(EVT /*VT1*/, EVT /*VT2*/) const {
1221 //===--------------------------------------------------------------------===//
1222 // Runtime Library hooks
1225 /// setLibcallName - Rename the default libcall routine name for the specified
1227 void setLibcallName(RTLIB::Libcall Call, const char *Name) {
1228 LibcallRoutineNames[Call] = Name;
1231 /// getLibcallName - Get the libcall routine name for the specified libcall.
1233 const char *getLibcallName(RTLIB::Libcall Call) const {
1234 return LibcallRoutineNames[Call];
1237 /// setCmpLibcallCC - Override the default CondCode to be used to test the
1238 /// result of the comparison libcall against zero.
1239 void setCmpLibcallCC(RTLIB::Libcall Call, ISD::CondCode CC) {
1240 CmpLibcallCCs[Call] = CC;
1243 /// getCmpLibcallCC - Get the CondCode that's to be used to test the result of
1244 /// the comparison libcall against zero.
1245 ISD::CondCode getCmpLibcallCC(RTLIB::Libcall Call) const {
1246 return CmpLibcallCCs[Call];
1249 /// setLibcallCallingConv - Set the CallingConv that should be used for the
1250 /// specified libcall.
1251 void setLibcallCallingConv(RTLIB::Libcall Call, CallingConv::ID CC) {
1252 LibcallCallingConvs[Call] = CC;
1255 /// getLibcallCallingConv - Get the CallingConv that should be used for the
1256 /// specified libcall.
1257 CallingConv::ID getLibcallCallingConv(RTLIB::Libcall Call) const {
1258 return LibcallCallingConvs[Call];
1262 const TargetMachine &TM;
1263 const DataLayout *TD;
1264 const TargetLoweringObjectFile &TLOF;
1266 /// PointerTy - The type to use for pointers for the default address space,
1267 /// usually i32 or i64.
1271 /// IsLittleEndian - True if this is a little endian target.
1273 bool IsLittleEndian;
1275 /// SelectIsExpensive - Tells the code generator not to expand operations
1276 /// into sequences that use the select operations if possible.
1277 bool SelectIsExpensive;
1279 /// IntDivIsCheap - Tells the code generator not to expand integer divides by
1280 /// constants into a sequence of muls, adds, and shifts. This is a hack until
1281 /// a real cost model is in place. If we ever optimize for size, this will be
1282 /// set to true unconditionally.
1285 /// BypassSlowDivMap - Tells the code generator to bypass slow divide or
1286 /// remainder instructions. For example, BypassSlowDivWidths[32,8] tells the
1287 /// code generator to bypass 32-bit integer div/rem with an 8-bit unsigned
1288 /// integer div/rem when the operands are positive and less than 256.
1289 DenseMap <unsigned int, unsigned int> BypassSlowDivWidths;
1291 /// Pow2DivIsCheap - Tells the code generator that it shouldn't generate
1292 /// srl/add/sra for a signed divide by power of two, and let the target handle
1294 bool Pow2DivIsCheap;
1296 /// JumpIsExpensive - Tells the code generator that it shouldn't generate
1297 /// extra flow control instructions and should attempt to combine flow
1298 /// control instructions via predication.
1299 bool JumpIsExpensive;
1301 /// UseUnderscoreSetJmp - This target prefers to use _setjmp to implement
1302 /// llvm.setjmp. Defaults to false.
1303 bool UseUnderscoreSetJmp;
1305 /// UseUnderscoreLongJmp - This target prefers to use _longjmp to implement
1306 /// llvm.longjmp. Defaults to false.
1307 bool UseUnderscoreLongJmp;
1309 /// SupportJumpTables - Whether the target can generate code for jumptables.
1310 /// If it's not true, then each jumptable must be lowered into if-then-else's.
1311 bool SupportJumpTables;
1313 /// MinimumJumpTableEntries - Number of blocks threshold to use jump tables.
1314 int MinimumJumpTableEntries;
1316 /// BooleanContents - Information about the contents of the high-bits in
1317 /// boolean values held in a type wider than i1. See getBooleanContents.
1318 BooleanContent BooleanContents;
1319 /// BooleanVectorContents - Information about the contents of the high-bits
1320 /// in boolean vector values when the element type is wider than i1. See
1321 /// getBooleanContents.
1322 BooleanContent BooleanVectorContents;
1324 /// SchedPreferenceInfo - The target scheduling preference: shortest possible
1325 /// total cycles or lowest register usage.
1326 Sched::Preference SchedPreferenceInfo;
1328 /// JumpBufSize - The size, in bytes, of the target's jmp_buf buffers
1329 unsigned JumpBufSize;
1331 /// JumpBufAlignment - The alignment, in bytes, of the target's jmp_buf
1333 unsigned JumpBufAlignment;
1335 /// MinStackArgumentAlignment - The minimum alignment that any argument
1336 /// on the stack needs to have.
1338 unsigned MinStackArgumentAlignment;
1340 /// MinFunctionAlignment - The minimum function alignment (used when
1341 /// optimizing for size, and to prevent explicitly provided alignment
1342 /// from leading to incorrect code).
1344 unsigned MinFunctionAlignment;
1346 /// PrefFunctionAlignment - The preferred function alignment (used when
1347 /// alignment unspecified and optimizing for speed).
1349 unsigned PrefFunctionAlignment;
1351 /// PrefLoopAlignment - The preferred loop alignment.
1353 unsigned PrefLoopAlignment;
1355 /// ShouldFoldAtomicFences - Whether fencing MEMBARRIER instructions should
1356 /// be folded into the enclosed atomic intrinsic instruction by the
1358 bool ShouldFoldAtomicFences;
1360 /// InsertFencesForAtomic - Whether the DAG builder should automatically
1361 /// insert fences and reduce ordering for atomics. (This will be set for
1362 /// for most architectures with weak memory ordering.)
1363 bool InsertFencesForAtomic;
1365 /// StackPointerRegisterToSaveRestore - If set to a physical register, this
1366 /// specifies the register that llvm.savestack/llvm.restorestack should save
1368 unsigned StackPointerRegisterToSaveRestore;
1370 /// ExceptionPointerRegister - If set to a physical register, this specifies
1371 /// the register that receives the exception address on entry to a landing
1373 unsigned ExceptionPointerRegister;
1375 /// ExceptionSelectorRegister - If set to a physical register, this specifies
1376 /// the register that receives the exception typeid on entry to a landing
1378 unsigned ExceptionSelectorRegister;
1380 /// RegClassForVT - This indicates the default register class to use for
1381 /// each ValueType the target supports natively.
1382 const TargetRegisterClass *RegClassForVT[MVT::LAST_VALUETYPE];
1383 unsigned char NumRegistersForVT[MVT::LAST_VALUETYPE];
1384 MVT RegisterTypeForVT[MVT::LAST_VALUETYPE];
1386 /// RepRegClassForVT - This indicates the "representative" register class to
1387 /// use for each ValueType the target supports natively. This information is
1388 /// used by the scheduler to track register pressure. By default, the
1389 /// representative register class is the largest legal super-reg register
1390 /// class of the register class of the specified type. e.g. On x86, i8, i16,
1391 /// and i32's representative class would be GR32.
1392 const TargetRegisterClass *RepRegClassForVT[MVT::LAST_VALUETYPE];
1394 /// RepRegClassCostForVT - This indicates the "cost" of the "representative"
1395 /// register class for each ValueType. The cost is used by the scheduler to
1396 /// approximate register pressure.
1397 uint8_t RepRegClassCostForVT[MVT::LAST_VALUETYPE];
1399 /// TransformToType - For any value types we are promoting or expanding, this
1400 /// contains the value type that we are changing to. For Expanded types, this
1401 /// contains one step of the expand (e.g. i64 -> i32), even if there are
1402 /// multiple steps required (e.g. i64 -> i16). For types natively supported
1403 /// by the system, this holds the same type (e.g. i32 -> i32).
1404 MVT TransformToType[MVT::LAST_VALUETYPE];
1406 /// OpActions - For each operation and each value type, keep a LegalizeAction
1407 /// that indicates how instruction selection should deal with the operation.
1408 /// Most operations are Legal (aka, supported natively by the target), but
1409 /// operations that are not should be described. Note that operations on
1410 /// non-legal value types are not described here.
1411 uint8_t OpActions[MVT::LAST_VALUETYPE][ISD::BUILTIN_OP_END];
1413 /// LoadExtActions - For each load extension type and each value type,
1414 /// keep a LegalizeAction that indicates how instruction selection should deal
1415 /// with a load of a specific value type and extension type.
1416 uint8_t LoadExtActions[MVT::LAST_VALUETYPE][ISD::LAST_LOADEXT_TYPE];
1418 /// TruncStoreActions - For each value type pair keep a LegalizeAction that
1419 /// indicates whether a truncating store of a specific value type and
1420 /// truncating type is legal.
1421 uint8_t TruncStoreActions[MVT::LAST_VALUETYPE][MVT::LAST_VALUETYPE];
1423 /// IndexedModeActions - For each indexed mode and each value type,
1424 /// keep a pair of LegalizeAction that indicates how instruction
1425 /// selection should deal with the load / store. The first dimension is the
1426 /// value_type for the reference. The second dimension represents the various
1427 /// modes for load store.
1428 uint8_t IndexedModeActions[MVT::LAST_VALUETYPE][ISD::LAST_INDEXED_MODE];
1430 /// CondCodeActions - For each condition code (ISD::CondCode) keep a
1431 /// LegalizeAction that indicates how instruction selection should
1432 /// deal with the condition code.
1433 /// Because each CC action takes up 2 bits, we need to have the array size
1434 /// be large enough to fit all of the value types. This can be done by
1435 /// dividing the MVT::LAST_VALUETYPE by 32 and adding one.
1436 uint64_t CondCodeActions[ISD::SETCC_INVALID][(MVT::LAST_VALUETYPE / 32) + 1];
1438 ValueTypeActionImpl ValueTypeActions;
1442 getTypeConversion(LLVMContext &Context, EVT VT) const {
1443 // If this is a simple type, use the ComputeRegisterProp mechanism.
1444 if (VT.isSimple()) {
1445 MVT SVT = VT.getSimpleVT();
1446 assert((unsigned)SVT.SimpleTy < array_lengthof(TransformToType));
1447 MVT NVT = TransformToType[SVT.SimpleTy];
1448 LegalizeTypeAction LA = ValueTypeActions.getTypeAction(SVT);
1452 ValueTypeActions.getTypeAction(NVT) != TypePromoteInteger)
1453 && "Promote may not follow Expand or Promote");
1455 if (LA == TypeSplitVector)
1456 return LegalizeKind(LA, EVT::getVectorVT(Context,
1457 SVT.getVectorElementType(),
1458 SVT.getVectorNumElements()/2));
1459 if (LA == TypeScalarizeVector)
1460 return LegalizeKind(LA, SVT.getVectorElementType());
1461 return LegalizeKind(LA, NVT);
1464 // Handle Extended Scalar Types.
1465 if (!VT.isVector()) {
1466 assert(VT.isInteger() && "Float types must be simple");
1467 unsigned BitSize = VT.getSizeInBits();
1468 // First promote to a power-of-two size, then expand if necessary.
1469 if (BitSize < 8 || !isPowerOf2_32(BitSize)) {
1470 EVT NVT = VT.getRoundIntegerType(Context);
1471 assert(NVT != VT && "Unable to round integer VT");
1472 LegalizeKind NextStep = getTypeConversion(Context, NVT);
1473 // Avoid multi-step promotion.
1474 if (NextStep.first == TypePromoteInteger) return NextStep;
1475 // Return rounded integer type.
1476 return LegalizeKind(TypePromoteInteger, NVT);
1479 return LegalizeKind(TypeExpandInteger,
1480 EVT::getIntegerVT(Context, VT.getSizeInBits()/2));
1483 // Handle vector types.
1484 unsigned NumElts = VT.getVectorNumElements();
1485 EVT EltVT = VT.getVectorElementType();
1487 // Vectors with only one element are always scalarized.
1489 return LegalizeKind(TypeScalarizeVector, EltVT);
1491 // Try to widen vector elements until a legal type is found.
1492 if (EltVT.isInteger()) {
1493 // Vectors with a number of elements that is not a power of two are always
1494 // widened, for example <3 x float> -> <4 x float>.
1495 if (!VT.isPow2VectorType()) {
1496 NumElts = (unsigned)NextPowerOf2(NumElts);
1497 EVT NVT = EVT::getVectorVT(Context, EltVT, NumElts);
1498 return LegalizeKind(TypeWidenVector, NVT);
1501 // Examine the element type.
1502 LegalizeKind LK = getTypeConversion(Context, EltVT);
1504 // If type is to be expanded, split the vector.
1505 // <4 x i140> -> <2 x i140>
1506 if (LK.first == TypeExpandInteger)
1507 return LegalizeKind(TypeSplitVector,
1508 EVT::getVectorVT(Context, EltVT, NumElts / 2));
1510 // Promote the integer element types until a legal vector type is found
1511 // or until the element integer type is too big. If a legal type was not
1512 // found, fallback to the usual mechanism of widening/splitting the
1515 // Increase the bitwidth of the element to the next pow-of-two
1516 // (which is greater than 8 bits).
1517 EltVT = EVT::getIntegerVT(Context, 1 + EltVT.getSizeInBits()
1518 ).getRoundIntegerType(Context);
1520 // Stop trying when getting a non-simple element type.
1521 // Note that vector elements may be greater than legal vector element
1522 // types. Example: X86 XMM registers hold 64bit element on 32bit systems.
1523 if (!EltVT.isSimple()) break;
1525 // Build a new vector type and check if it is legal.
1526 MVT NVT = MVT::getVectorVT(EltVT.getSimpleVT(), NumElts);
1527 // Found a legal promoted vector type.
1528 if (NVT != MVT() && ValueTypeActions.getTypeAction(NVT) == TypeLegal)
1529 return LegalizeKind(TypePromoteInteger,
1530 EVT::getVectorVT(Context, EltVT, NumElts));
1534 // Try to widen the vector until a legal type is found.
1535 // If there is no wider legal type, split the vector.
1537 // Round up to the next power of 2.
1538 NumElts = (unsigned)NextPowerOf2(NumElts);
1540 // If there is no simple vector type with this many elements then there
1541 // cannot be a larger legal vector type. Note that this assumes that
1542 // there are no skipped intermediate vector types in the simple types.
1543 if (!EltVT.isSimple()) break;
1544 MVT LargerVector = MVT::getVectorVT(EltVT.getSimpleVT(), NumElts);
1545 if (LargerVector == MVT()) break;
1547 // If this type is legal then widen the vector.
1548 if (ValueTypeActions.getTypeAction(LargerVector) == TypeLegal)
1549 return LegalizeKind(TypeWidenVector, LargerVector);
1552 // Widen odd vectors to next power of two.
1553 if (!VT.isPow2VectorType()) {
1554 EVT NVT = VT.getPow2VectorType(Context);
1555 return LegalizeKind(TypeWidenVector, NVT);
1558 // Vectors with illegal element types are expanded.
1559 EVT NVT = EVT::getVectorVT(Context, EltVT, VT.getVectorNumElements() / 2);
1560 return LegalizeKind(TypeSplitVector, NVT);
1564 std::vector<std::pair<MVT, const TargetRegisterClass*> > AvailableRegClasses;
1566 /// TargetDAGCombineArray - Targets can specify ISD nodes that they would
1567 /// like PerformDAGCombine callbacks for by calling setTargetDAGCombine(),
1568 /// which sets a bit in this array.
1570 TargetDAGCombineArray[(ISD::BUILTIN_OP_END+CHAR_BIT-1)/CHAR_BIT];
1572 /// PromoteToType - For operations that must be promoted to a specific type,
1573 /// this holds the destination type. This map should be sparse, so don't hold
1576 /// Targets add entries to this map with AddPromotedToType(..), clients access
1577 /// this with getTypeToPromoteTo(..).
1578 std::map<std::pair<unsigned, MVT::SimpleValueType>, MVT::SimpleValueType>
1581 /// LibcallRoutineNames - Stores the name each libcall.
1583 const char *LibcallRoutineNames[RTLIB::UNKNOWN_LIBCALL];
1585 /// CmpLibcallCCs - The ISD::CondCode that should be used to test the result
1586 /// of each of the comparison libcall against zero.
1587 ISD::CondCode CmpLibcallCCs[RTLIB::UNKNOWN_LIBCALL];
1589 /// LibcallCallingConvs - Stores the CallingConv that should be used for each
1591 CallingConv::ID LibcallCallingConvs[RTLIB::UNKNOWN_LIBCALL];
1594 /// When lowering \@llvm.memset this field specifies the maximum number of
1595 /// store operations that may be substituted for the call to memset. Targets
1596 /// must set this value based on the cost threshold for that target. Targets
1597 /// should assume that the memset will be done using as many of the largest
1598 /// store operations first, followed by smaller ones, if necessary, per
1599 /// alignment restrictions. For example, storing 9 bytes on a 32-bit machine
1600 /// with 16-bit alignment would result in four 2-byte stores and one 1-byte
1601 /// store. This only applies to setting a constant array of a constant size.
1602 /// @brief Specify maximum number of store instructions per memset call.
1603 unsigned MaxStoresPerMemset;
1605 /// Maximum number of stores operations that may be substituted for the call
1606 /// to memset, used for functions with OptSize attribute.
1607 unsigned MaxStoresPerMemsetOptSize;
1609 /// When lowering \@llvm.memcpy this field specifies the maximum number of
1610 /// store operations that may be substituted for a call to memcpy. Targets
1611 /// must set this value based on the cost threshold for that target. Targets
1612 /// should assume that the memcpy will be done using as many of the largest
1613 /// store operations first, followed by smaller ones, if necessary, per
1614 /// alignment restrictions. For example, storing 7 bytes on a 32-bit machine
1615 /// with 32-bit alignment would result in one 4-byte store, a one 2-byte store
1616 /// and one 1-byte store. This only applies to copying a constant array of
1618 /// @brief Specify maximum bytes of store instructions per memcpy call.
1619 unsigned MaxStoresPerMemcpy;
1621 /// Maximum number of store operations that may be substituted for a call
1622 /// to memcpy, used for functions with OptSize attribute.
1623 unsigned MaxStoresPerMemcpyOptSize;
1625 /// When lowering \@llvm.memmove this field specifies the maximum number of
1626 /// store instructions that may be substituted for a call to memmove. Targets
1627 /// must set this value based on the cost threshold for that target. Targets
1628 /// should assume that the memmove will be done using as many of the largest
1629 /// store operations first, followed by smaller ones, if necessary, per
1630 /// alignment restrictions. For example, moving 9 bytes on a 32-bit machine
1631 /// with 8-bit alignment would result in nine 1-byte stores. This only
1632 /// applies to copying a constant array of constant size.
1633 /// @brief Specify maximum bytes of store instructions per memmove call.
1634 unsigned MaxStoresPerMemmove;
1636 /// Maximum number of store instructions that may be substituted for a call
1637 /// to memmove, used for functions with OpSize attribute.
1638 unsigned MaxStoresPerMemmoveOptSize;
1640 /// This field specifies whether the target can benefit from code placement
1642 bool BenefitFromCodePlacementOpt;
1644 /// PredictableSelectIsExpensive - Tells the code generator that select is
1645 /// more expensive than a branch if the branch is usually predicted right.
1646 bool PredictableSelectIsExpensive;
1649 /// isLegalRC - Return true if the value types that can be represented by the
1650 /// specified register class are all legal.
1651 bool isLegalRC(const TargetRegisterClass *RC) const;
1654 //===----------------------------------------------------------------------===//
1655 /// TargetLowering - This class defines information used to lower LLVM code to
1656 /// legal SelectionDAG operators that the target instruction selector can accept
1659 /// This class also defines callbacks that targets must implement to lower
1660 /// target-specific constructs to SelectionDAG operators.
1662 class TargetLowering : public TargetLoweringBase {
1663 TargetLowering(const TargetLowering&) LLVM_DELETED_FUNCTION;
1664 void operator=(const TargetLowering&) LLVM_DELETED_FUNCTION;
1667 /// NOTE: The constructor takes ownership of TLOF.
1668 explicit TargetLowering(const TargetMachine &TM,
1669 const TargetLoweringObjectFile *TLOF);
1671 /// getPreIndexedAddressParts - returns true by value, base pointer and
1672 /// offset pointer and addressing mode by reference if the node's address
1673 /// can be legally represented as pre-indexed load / store address.
1674 virtual bool getPreIndexedAddressParts(SDNode * /*N*/, SDValue &/*Base*/,
1675 SDValue &/*Offset*/,
1676 ISD::MemIndexedMode &/*AM*/,
1677 SelectionDAG &/*DAG*/) const {
1681 /// getPostIndexedAddressParts - returns true by value, base pointer and
1682 /// offset pointer and addressing mode by reference if this node can be
1683 /// combined with a load / store to form a post-indexed load / store.
1684 virtual bool getPostIndexedAddressParts(SDNode * /*N*/, SDNode * /*Op*/,
1685 SDValue &/*Base*/, SDValue &/*Offset*/,
1686 ISD::MemIndexedMode &/*AM*/,
1687 SelectionDAG &/*DAG*/) const {
1691 /// getJumpTableEncoding - Return the entry encoding for a jump table in the
1692 /// current function. The returned value is a member of the
1693 /// MachineJumpTableInfo::JTEntryKind enum.
1694 virtual unsigned getJumpTableEncoding() const;
1696 virtual const MCExpr *
1697 LowerCustomJumpTableEntry(const MachineJumpTableInfo * /*MJTI*/,
1698 const MachineBasicBlock * /*MBB*/, unsigned /*uid*/,
1699 MCContext &/*Ctx*/) const {
1700 llvm_unreachable("Need to implement this hook if target has custom JTIs");
1703 /// getPICJumpTableRelocaBase - Returns relocation base for the given PIC
1705 virtual SDValue getPICJumpTableRelocBase(SDValue Table,
1706 SelectionDAG &DAG) const;
1708 /// getPICJumpTableRelocBaseExpr - This returns the relocation base for the
1709 /// given PIC jumptable, the same as getPICJumpTableRelocBase, but as an
1711 virtual const MCExpr *
1712 getPICJumpTableRelocBaseExpr(const MachineFunction *MF,
1713 unsigned JTI, MCContext &Ctx) const;
1715 /// isOffsetFoldingLegal - Return true if folding a constant offset
1716 /// with the given GlobalAddress is legal. It is frequently not legal in
1717 /// PIC relocation models.
1718 virtual bool isOffsetFoldingLegal(const GlobalAddressSDNode *GA) const;
1720 bool isInTailCallPosition(SelectionDAG &DAG, SDNode *Node,
1721 SDValue &Chain) const;
1723 void softenSetCCOperands(SelectionDAG &DAG, EVT VT,
1724 SDValue &NewLHS, SDValue &NewRHS,
1725 ISD::CondCode &CCCode, DebugLoc DL) const;
1727 SDValue makeLibCall(SelectionDAG &DAG, RTLIB::Libcall LC, EVT RetVT,
1728 const SDValue *Ops, unsigned NumOps,
1729 bool isSigned, DebugLoc dl) const;
1731 //===--------------------------------------------------------------------===//
1732 // TargetLowering Optimization Methods
1735 /// TargetLoweringOpt - A convenience struct that encapsulates a DAG, and two
1736 /// SDValues for returning information from TargetLowering to its clients
1737 /// that want to combine
1738 struct TargetLoweringOpt {
1745 explicit TargetLoweringOpt(SelectionDAG &InDAG,
1747 DAG(InDAG), LegalTys(LT), LegalOps(LO) {}
1749 bool LegalTypes() const { return LegalTys; }
1750 bool LegalOperations() const { return LegalOps; }
1752 bool CombineTo(SDValue O, SDValue N) {
1758 /// ShrinkDemandedConstant - Check to see if the specified operand of the
1759 /// specified instruction is a constant integer. If so, check to see if
1760 /// there are any bits set in the constant that are not demanded. If so,
1761 /// shrink the constant and return true.
1762 bool ShrinkDemandedConstant(SDValue Op, const APInt &Demanded);
1764 /// ShrinkDemandedOp - Convert x+y to (VT)((SmallVT)x+(SmallVT)y) if the
1765 /// casts are free. This uses isZExtFree and ZERO_EXTEND for the widening
1766 /// cast, but it could be generalized for targets with other types of
1767 /// implicit widening casts.
1768 bool ShrinkDemandedOp(SDValue Op, unsigned BitWidth, const APInt &Demanded,
1772 /// SimplifyDemandedBits - Look at Op. At this point, we know that only the
1773 /// DemandedMask bits of the result of Op are ever used downstream. If we can
1774 /// use this information to simplify Op, create a new simplified DAG node and
1775 /// return true, returning the original and new nodes in Old and New.
1776 /// Otherwise, analyze the expression and return a mask of KnownOne and
1777 /// KnownZero bits for the expression (used to simplify the caller).
1778 /// The KnownZero/One bits may only be accurate for those bits in the
1780 bool SimplifyDemandedBits(SDValue Op, const APInt &DemandedMask,
1781 APInt &KnownZero, APInt &KnownOne,
1782 TargetLoweringOpt &TLO, unsigned Depth = 0) const;
1784 /// computeMaskedBitsForTargetNode - Determine which of the bits specified in
1785 /// Mask are known to be either zero or one and return them in the
1786 /// KnownZero/KnownOne bitsets.
1787 virtual void computeMaskedBitsForTargetNode(const SDValue Op,
1790 const SelectionDAG &DAG,
1791 unsigned Depth = 0) const;
1793 /// ComputeNumSignBitsForTargetNode - This method can be implemented by
1794 /// targets that want to expose additional information about sign bits to the
1796 virtual unsigned ComputeNumSignBitsForTargetNode(SDValue Op,
1797 unsigned Depth = 0) const;
1799 struct DAGCombinerInfo {
1800 void *DC; // The DAG Combiner object.
1802 bool CalledByLegalizer;
1806 DAGCombinerInfo(SelectionDAG &dag, CombineLevel level, bool cl, void *dc)
1807 : DC(dc), Level(level), CalledByLegalizer(cl), DAG(dag) {}
1809 bool isBeforeLegalize() const { return Level == BeforeLegalizeTypes; }
1810 bool isBeforeLegalizeOps() const { return Level < AfterLegalizeVectorOps; }
1811 bool isAfterLegalizeVectorOps() const {
1812 return Level == AfterLegalizeDAG;
1814 CombineLevel getDAGCombineLevel() { return Level; }
1815 bool isCalledByLegalizer() const { return CalledByLegalizer; }
1817 void AddToWorklist(SDNode *N);
1818 void RemoveFromWorklist(SDNode *N);
1819 SDValue CombineTo(SDNode *N, const std::vector<SDValue> &To,
1821 SDValue CombineTo(SDNode *N, SDValue Res, bool AddTo = true);
1822 SDValue CombineTo(SDNode *N, SDValue Res0, SDValue Res1, bool AddTo = true);
1824 void CommitTargetLoweringOpt(const TargetLoweringOpt &TLO);
1827 /// SimplifySetCC - Try to simplify a setcc built with the specified operands
1828 /// and cc. If it is unable to simplify it, return a null SDValue.
1829 SDValue SimplifySetCC(EVT VT, SDValue N0, SDValue N1,
1830 ISD::CondCode Cond, bool foldBooleans,
1831 DAGCombinerInfo &DCI, DebugLoc dl) const;
1833 /// isGAPlusOffset - Returns true (and the GlobalValue and the offset) if the
1834 /// node is a GlobalAddress + offset.
1836 isGAPlusOffset(SDNode *N, const GlobalValue* &GA, int64_t &Offset) const;
1838 /// PerformDAGCombine - This method will be invoked for all target nodes and
1839 /// for any target-independent nodes that the target has registered with
1842 /// The semantics are as follows:
1844 /// SDValue.Val == 0 - No change was made
1845 /// SDValue.Val == N - N was replaced, is dead, and is already handled.
1846 /// otherwise - N should be replaced by the returned Operand.
1848 /// In addition, methods provided by DAGCombinerInfo may be used to perform
1849 /// more complex transformations.
1851 virtual SDValue PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const;
1853 /// isTypeDesirableForOp - Return true if the target has native support for
1854 /// the specified value type and it is 'desirable' to use the type for the
1855 /// given node type. e.g. On x86 i16 is legal, but undesirable since i16
1856 /// instruction encodings are longer and some i16 instructions are slow.
1857 virtual bool isTypeDesirableForOp(unsigned /*Opc*/, EVT VT) const {
1858 // By default, assume all legal types are desirable.
1859 return isTypeLegal(VT);
1862 /// isDesirableToPromoteOp - Return true if it is profitable for dag combiner
1863 /// to transform a floating point op of specified opcode to a equivalent op of
1864 /// an integer type. e.g. f32 load -> i32 load can be profitable on ARM.
1865 virtual bool isDesirableToTransformToIntegerOp(unsigned /*Opc*/,
1870 /// IsDesirableToPromoteOp - This method query the target whether it is
1871 /// beneficial for dag combiner to promote the specified node. If true, it
1872 /// should return the desired promotion type by reference.
1873 virtual bool IsDesirableToPromoteOp(SDValue /*Op*/, EVT &/*PVT*/) const {
1877 //===--------------------------------------------------------------------===//
1878 // Lowering methods - These methods must be implemented by targets so that
1879 // the SelectionDAGBuilder code knows how to lower these.
1882 /// LowerFormalArguments - This hook must be implemented to lower the
1883 /// incoming (formal) arguments, described by the Ins array, into the
1884 /// specified DAG. The implementation should fill in the InVals array
1885 /// with legal-type argument values, and return the resulting token
1889 LowerFormalArguments(SDValue /*Chain*/, CallingConv::ID /*CallConv*/,
1891 const SmallVectorImpl<ISD::InputArg> &/*Ins*/,
1892 DebugLoc /*dl*/, SelectionDAG &/*DAG*/,
1893 SmallVectorImpl<SDValue> &/*InVals*/) const {
1894 llvm_unreachable("Not Implemented");
1897 struct ArgListEntry {
1908 ArgListEntry() : isSExt(false), isZExt(false), isInReg(false),
1909 isSRet(false), isNest(false), isByVal(false), Alignment(0) { }
1911 typedef std::vector<ArgListEntry> ArgListTy;
1913 /// CallLoweringInfo - This structure contains all information that is
1914 /// necessary for lowering calls. It is passed to TLI::LowerCallTo when the
1915 /// SelectionDAG builder needs to lower a call, and targets will see this
1916 /// struct in their LowerCall implementation.
1917 struct CallLoweringInfo {
1924 bool DoesNotReturn : 1;
1925 bool IsReturnValueUsed : 1;
1927 // IsTailCall should be modified by implementations of
1928 // TargetLowering::LowerCall that perform tail call conversions.
1931 unsigned NumFixedArgs;
1932 CallingConv::ID CallConv;
1937 ImmutableCallSite *CS;
1938 SmallVector<ISD::OutputArg, 32> Outs;
1939 SmallVector<SDValue, 32> OutVals;
1940 SmallVector<ISD::InputArg, 32> Ins;
1943 /// CallLoweringInfo - Constructs a call lowering context based on the
1944 /// ImmutableCallSite \p cs.
1945 CallLoweringInfo(SDValue chain, Type *retTy,
1946 FunctionType *FTy, bool isTailCall, SDValue callee,
1947 ArgListTy &args, SelectionDAG &dag, DebugLoc dl,
1948 ImmutableCallSite &cs)
1949 : Chain(chain), RetTy(retTy), RetSExt(cs.paramHasAttr(0, Attribute::SExt)),
1950 RetZExt(cs.paramHasAttr(0, Attribute::ZExt)), IsVarArg(FTy->isVarArg()),
1951 IsInReg(cs.paramHasAttr(0, Attribute::InReg)),
1952 DoesNotReturn(cs.doesNotReturn()),
1953 IsReturnValueUsed(!cs.getInstruction()->use_empty()),
1954 IsTailCall(isTailCall), NumFixedArgs(FTy->getNumParams()),
1955 CallConv(cs.getCallingConv()), Callee(callee), Args(args), DAG(dag),
1958 /// CallLoweringInfo - Constructs a call lowering context based on the
1959 /// provided call information.
1960 CallLoweringInfo(SDValue chain, Type *retTy, bool retSExt, bool retZExt,
1961 bool isVarArg, bool isInReg, unsigned numFixedArgs,
1962 CallingConv::ID callConv, bool isTailCall,
1963 bool doesNotReturn, bool isReturnValueUsed, SDValue callee,
1964 ArgListTy &args, SelectionDAG &dag, DebugLoc dl)
1965 : Chain(chain), RetTy(retTy), RetSExt(retSExt), RetZExt(retZExt),
1966 IsVarArg(isVarArg), IsInReg(isInReg), DoesNotReturn(doesNotReturn),
1967 IsReturnValueUsed(isReturnValueUsed), IsTailCall(isTailCall),
1968 NumFixedArgs(numFixedArgs), CallConv(callConv), Callee(callee),
1969 Args(args), DAG(dag), DL(dl), CS(NULL) {}
1972 /// LowerCallTo - This function lowers an abstract call to a function into an
1973 /// actual call. This returns a pair of operands. The first element is the
1974 /// return value for the function (if RetTy is not VoidTy). The second
1975 /// element is the outgoing token chain. It calls LowerCall to do the actual
1977 std::pair<SDValue, SDValue> LowerCallTo(CallLoweringInfo &CLI) const;
1979 /// LowerCall - This hook must be implemented to lower calls into the
1980 /// the specified DAG. The outgoing arguments to the call are described
1981 /// by the Outs array, and the values to be returned by the call are
1982 /// described by the Ins array. The implementation should fill in the
1983 /// InVals array with legal-type return values from the call, and return
1984 /// the resulting token chain value.
1986 LowerCall(CallLoweringInfo &/*CLI*/,
1987 SmallVectorImpl<SDValue> &/*InVals*/) const {
1988 llvm_unreachable("Not Implemented");
1991 /// HandleByVal - Target-specific cleanup for formal ByVal parameters.
1992 virtual void HandleByVal(CCState *, unsigned &, unsigned) const {}
1994 /// CanLowerReturn - This hook should be implemented to check whether the
1995 /// return values described by the Outs array can fit into the return
1996 /// registers. If false is returned, an sret-demotion is performed.
1998 virtual bool CanLowerReturn(CallingConv::ID /*CallConv*/,
1999 MachineFunction &/*MF*/, bool /*isVarArg*/,
2000 const SmallVectorImpl<ISD::OutputArg> &/*Outs*/,
2001 LLVMContext &/*Context*/) const
2003 // Return true by default to get preexisting behavior.
2007 /// LowerReturn - This hook must be implemented to lower outgoing
2008 /// return values, described by the Outs array, into the specified
2009 /// DAG. The implementation should return the resulting token chain
2013 LowerReturn(SDValue /*Chain*/, CallingConv::ID /*CallConv*/,
2015 const SmallVectorImpl<ISD::OutputArg> &/*Outs*/,
2016 const SmallVectorImpl<SDValue> &/*OutVals*/,
2017 DebugLoc /*dl*/, SelectionDAG &/*DAG*/) const {
2018 llvm_unreachable("Not Implemented");
2021 /// isUsedByReturnOnly - Return true if result of the specified node is used
2022 /// by a return node only. It also compute and return the input chain for the
2024 /// This is used to determine whether it is possible
2025 /// to codegen a libcall as tail call at legalization time.
2026 virtual bool isUsedByReturnOnly(SDNode *, SDValue &Chain) const {
2030 /// mayBeEmittedAsTailCall - Return true if the target may be able emit the
2031 /// call instruction as a tail call. This is used by optimization passes to
2032 /// determine if it's profitable to duplicate return instructions to enable
2033 /// tailcall optimization.
2034 virtual bool mayBeEmittedAsTailCall(CallInst *) const {
2038 /// getTypeForExtArgOrReturn - Return the type that should be used to zero or
2039 /// sign extend a zeroext/signext integer argument or return value.
2040 /// FIXME: Most C calling convention requires the return type to be promoted,
2041 /// but this is not true all the time, e.g. i1 on x86-64. It is also not
2042 /// necessary for non-C calling conventions. The frontend should handle this
2043 /// and include all of the necessary information.
2044 virtual MVT getTypeForExtArgOrReturn(MVT VT,
2045 ISD::NodeType /*ExtendKind*/) const {
2046 MVT MinVT = getRegisterType(MVT::i32);
2047 return VT.bitsLT(MinVT) ? MinVT : VT;
2050 /// LowerOperationWrapper - This callback is invoked by the type legalizer
2051 /// to legalize nodes with an illegal operand type but legal result types.
2052 /// It replaces the LowerOperation callback in the type Legalizer.
2053 /// The reason we can not do away with LowerOperation entirely is that
2054 /// LegalizeDAG isn't yet ready to use this callback.
2055 /// TODO: Consider merging with ReplaceNodeResults.
2057 /// The target places new result values for the node in Results (their number
2058 /// and types must exactly match those of the original return values of
2059 /// the node), or leaves Results empty, which indicates that the node is not
2060 /// to be custom lowered after all.
2061 /// The default implementation calls LowerOperation.
2062 virtual void LowerOperationWrapper(SDNode *N,
2063 SmallVectorImpl<SDValue> &Results,
2064 SelectionDAG &DAG) const;
2066 /// LowerOperation - This callback is invoked for operations that are
2067 /// unsupported by the target, which are registered to use 'custom' lowering,
2068 /// and whose defined values are all legal.
2069 /// If the target has no operations that require custom lowering, it need not
2070 /// implement this. The default implementation of this aborts.
2071 virtual SDValue LowerOperation(SDValue Op, SelectionDAG &DAG) const;
2073 /// ReplaceNodeResults - This callback is invoked when a node result type is
2074 /// illegal for the target, and the operation was registered to use 'custom'
2075 /// lowering for that result type. The target places new result values for
2076 /// the node in Results (their number and types must exactly match those of
2077 /// the original return values of the node), or leaves Results empty, which
2078 /// indicates that the node is not to be custom lowered after all.
2080 /// If the target has no operations that require custom lowering, it need not
2081 /// implement this. The default implementation aborts.
2082 virtual void ReplaceNodeResults(SDNode * /*N*/,
2083 SmallVectorImpl<SDValue> &/*Results*/,
2084 SelectionDAG &/*DAG*/) const {
2085 llvm_unreachable("ReplaceNodeResults not implemented for this target!");
2088 /// getTargetNodeName() - This method returns the name of a target specific
2090 virtual const char *getTargetNodeName(unsigned Opcode) const;
2092 /// createFastISel - This method returns a target specific FastISel object,
2093 /// or null if the target does not support "fast" ISel.
2094 virtual FastISel *createFastISel(FunctionLoweringInfo &,
2095 const TargetLibraryInfo *) const {
2099 //===--------------------------------------------------------------------===//
2100 // Inline Asm Support hooks
2103 /// ExpandInlineAsm - This hook allows the target to expand an inline asm
2104 /// call to be explicit llvm code if it wants to. This is useful for
2105 /// turning simple inline asms into LLVM intrinsics, which gives the
2106 /// compiler more information about the behavior of the code.
2107 virtual bool ExpandInlineAsm(CallInst *) const {
2111 enum ConstraintType {
2112 C_Register, // Constraint represents specific register(s).
2113 C_RegisterClass, // Constraint represents any of register(s) in class.
2114 C_Memory, // Memory constraint.
2115 C_Other, // Something else.
2116 C_Unknown // Unsupported constraint.
2119 enum ConstraintWeight {
2121 CW_Invalid = -1, // No match.
2122 CW_Okay = 0, // Acceptable.
2123 CW_Good = 1, // Good weight.
2124 CW_Better = 2, // Better weight.
2125 CW_Best = 3, // Best weight.
2127 // Well-known weights.
2128 CW_SpecificReg = CW_Okay, // Specific register operands.
2129 CW_Register = CW_Good, // Register operands.
2130 CW_Memory = CW_Better, // Memory operands.
2131 CW_Constant = CW_Best, // Constant operand.
2132 CW_Default = CW_Okay // Default or don't know type.
2135 /// AsmOperandInfo - This contains information for each constraint that we are
2137 struct AsmOperandInfo : public InlineAsm::ConstraintInfo {
2138 /// ConstraintCode - This contains the actual string for the code, like "m".
2139 /// TargetLowering picks the 'best' code from ConstraintInfo::Codes that
2140 /// most closely matches the operand.
2141 std::string ConstraintCode;
2143 /// ConstraintType - Information about the constraint code, e.g. Register,
2144 /// RegisterClass, Memory, Other, Unknown.
2145 TargetLowering::ConstraintType ConstraintType;
2147 /// CallOperandval - If this is the result output operand or a
2148 /// clobber, this is null, otherwise it is the incoming operand to the
2149 /// CallInst. This gets modified as the asm is processed.
2150 Value *CallOperandVal;
2152 /// ConstraintVT - The ValueType for the operand value.
2155 /// isMatchingInputConstraint - Return true of this is an input operand that
2156 /// is a matching constraint like "4".
2157 bool isMatchingInputConstraint() const;
2159 /// getMatchedOperand - If this is an input matching constraint, this method
2160 /// returns the output operand it matches.
2161 unsigned getMatchedOperand() const;
2163 /// Copy constructor for copying from an AsmOperandInfo.
2164 AsmOperandInfo(const AsmOperandInfo &info)
2165 : InlineAsm::ConstraintInfo(info),
2166 ConstraintCode(info.ConstraintCode),
2167 ConstraintType(info.ConstraintType),
2168 CallOperandVal(info.CallOperandVal),
2169 ConstraintVT(info.ConstraintVT) {
2172 /// Copy constructor for copying from a ConstraintInfo.
2173 AsmOperandInfo(const InlineAsm::ConstraintInfo &info)
2174 : InlineAsm::ConstraintInfo(info),
2175 ConstraintType(TargetLowering::C_Unknown),
2176 CallOperandVal(0), ConstraintVT(MVT::Other) {
2180 typedef std::vector<AsmOperandInfo> AsmOperandInfoVector;
2182 /// ParseConstraints - Split up the constraint string from the inline
2183 /// assembly value into the specific constraints and their prefixes,
2184 /// and also tie in the associated operand values.
2185 /// If this returns an empty vector, and if the constraint string itself
2186 /// isn't empty, there was an error parsing.
2187 virtual AsmOperandInfoVector ParseConstraints(ImmutableCallSite CS) const;
2189 /// Examine constraint type and operand type and determine a weight value.
2190 /// The operand object must already have been set up with the operand type.
2191 virtual ConstraintWeight getMultipleConstraintMatchWeight(
2192 AsmOperandInfo &info, int maIndex) const;
2194 /// Examine constraint string and operand type and determine a weight value.
2195 /// The operand object must already have been set up with the operand type.
2196 virtual ConstraintWeight getSingleConstraintMatchWeight(
2197 AsmOperandInfo &info, const char *constraint) const;
2199 /// ComputeConstraintToUse - Determines the constraint code and constraint
2200 /// type to use for the specific AsmOperandInfo, setting
2201 /// OpInfo.ConstraintCode and OpInfo.ConstraintType. If the actual operand
2202 /// being passed in is available, it can be passed in as Op, otherwise an
2203 /// empty SDValue can be passed.
2204 virtual void ComputeConstraintToUse(AsmOperandInfo &OpInfo,
2206 SelectionDAG *DAG = 0) const;
2208 /// getConstraintType - Given a constraint, return the type of constraint it
2209 /// is for this target.
2210 virtual ConstraintType getConstraintType(const std::string &Constraint) const;
2212 /// getRegForInlineAsmConstraint - Given a physical register constraint (e.g.
2213 /// {edx}), return the register number and the register class for the
2216 /// Given a register class constraint, like 'r', if this corresponds directly
2217 /// to an LLVM register class, return a register of 0 and the register class
2220 /// This should only be used for C_Register constraints. On error,
2221 /// this returns a register number of 0 and a null register class pointer..
2222 virtual std::pair<unsigned, const TargetRegisterClass*>
2223 getRegForInlineAsmConstraint(const std::string &Constraint,
2226 /// LowerXConstraint - try to replace an X constraint, which matches anything,
2227 /// with another that has more specific requirements based on the type of the
2228 /// corresponding operand. This returns null if there is no replacement to
2230 virtual const char *LowerXConstraint(EVT ConstraintVT) const;
2232 /// LowerAsmOperandForConstraint - Lower the specified operand into the Ops
2233 /// vector. If it is invalid, don't add anything to Ops.
2234 virtual void LowerAsmOperandForConstraint(SDValue Op, std::string &Constraint,
2235 std::vector<SDValue> &Ops,
2236 SelectionDAG &DAG) const;
2238 //===--------------------------------------------------------------------===//
2239 // Div utility functions
2241 SDValue BuildExactSDIV(SDValue Op1, SDValue Op2, DebugLoc dl,
2242 SelectionDAG &DAG) const;
2243 SDValue BuildSDIV(SDNode *N, SelectionDAG &DAG, bool IsAfterLegalization,
2244 std::vector<SDNode*> *Created) const;
2245 SDValue BuildUDIV(SDNode *N, SelectionDAG &DAG, bool IsAfterLegalization,
2246 std::vector<SDNode*> *Created) const;
2248 //===--------------------------------------------------------------------===//
2249 // Instruction Emitting Hooks
2252 // EmitInstrWithCustomInserter - This method should be implemented by targets
2253 // that mark instructions with the 'usesCustomInserter' flag. These
2254 // instructions are special in various ways, which require special support to
2255 // insert. The specified MachineInstr is created but not inserted into any
2256 // basic blocks, and this method is called to expand it into a sequence of
2257 // instructions, potentially also creating new basic blocks and control flow.
2258 virtual MachineBasicBlock *
2259 EmitInstrWithCustomInserter(MachineInstr *MI, MachineBasicBlock *MBB) const;
2261 /// AdjustInstrPostInstrSelection - This method should be implemented by
2262 /// targets that mark instructions with the 'hasPostISelHook' flag. These
2263 /// instructions must be adjusted after instruction selection by target hooks.
2264 /// e.g. To fill in optional defs for ARM 's' setting instructions.
2266 AdjustInstrPostInstrSelection(MachineInstr *MI, SDNode *Node) const;
2269 /// GetReturnInfo - Given an LLVM IR type and return type attributes,
2270 /// compute the return value EVTs and flags, and optionally also
2271 /// the offsets, if the return value is being lowered to memory.
2272 void GetReturnInfo(Type* ReturnType, AttributeSet attr,
2273 SmallVectorImpl<ISD::OutputArg> &Outs,
2274 const TargetLowering &TLI);
2276 } // end llvm namespace