1 //===-- lib/CodeGen/MachineInstr.cpp --------------------------------------===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // Methods common to all machine instructions.
12 //===----------------------------------------------------------------------===//
14 #include "llvm/CodeGen/MachineInstr.h"
15 #include "llvm/Constants.h"
16 #include "llvm/InlineAsm.h"
17 #include "llvm/Value.h"
18 #include "llvm/Assembly/Writer.h"
19 #include "llvm/CodeGen/MachineFunction.h"
20 #include "llvm/CodeGen/MachineMemOperand.h"
21 #include "llvm/CodeGen/MachineRegisterInfo.h"
22 #include "llvm/CodeGen/PseudoSourceValue.h"
23 #include "llvm/Target/TargetMachine.h"
24 #include "llvm/Target/TargetInstrInfo.h"
25 #include "llvm/Target/TargetInstrDesc.h"
26 #include "llvm/Target/TargetRegisterInfo.h"
27 #include "llvm/Analysis/AliasAnalysis.h"
28 #include "llvm/Analysis/DebugInfo.h"
29 #include "llvm/Support/ErrorHandling.h"
30 #include "llvm/Support/LeakDetector.h"
31 #include "llvm/Support/MathExtras.h"
32 #include "llvm/Support/raw_ostream.h"
33 #include "llvm/ADT/FoldingSet.h"
36 //===----------------------------------------------------------------------===//
37 // MachineOperand Implementation
38 //===----------------------------------------------------------------------===//
40 /// AddRegOperandToRegInfo - Add this register operand to the specified
41 /// MachineRegisterInfo. If it is null, then the next/prev fields should be
42 /// explicitly nulled out.
43 void MachineOperand::AddRegOperandToRegInfo(MachineRegisterInfo *RegInfo) {
44 assert(isReg() && "Can only add reg operand to use lists");
46 // If the reginfo pointer is null, just explicitly null out or next/prev
47 // pointers, to ensure they are not garbage.
49 Contents.Reg.Prev = 0;
50 Contents.Reg.Next = 0;
54 // Otherwise, add this operand to the head of the registers use/def list.
55 MachineOperand **Head = &RegInfo->getRegUseDefListHead(getReg());
57 // For SSA values, we prefer to keep the definition at the start of the list.
58 // we do this by skipping over the definition if it is at the head of the
60 if (*Head && (*Head)->isDef())
61 Head = &(*Head)->Contents.Reg.Next;
63 Contents.Reg.Next = *Head;
64 if (Contents.Reg.Next) {
65 assert(getReg() == Contents.Reg.Next->getReg() &&
66 "Different regs on the same list!");
67 Contents.Reg.Next->Contents.Reg.Prev = &Contents.Reg.Next;
70 Contents.Reg.Prev = Head;
74 /// RemoveRegOperandFromRegInfo - Remove this register operand from the
75 /// MachineRegisterInfo it is linked with.
76 void MachineOperand::RemoveRegOperandFromRegInfo() {
77 assert(isOnRegUseList() && "Reg operand is not on a use list");
78 // Unlink this from the doubly linked list of operands.
79 MachineOperand *NextOp = Contents.Reg.Next;
80 *Contents.Reg.Prev = NextOp;
82 assert(NextOp->getReg() == getReg() && "Corrupt reg use/def chain!");
83 NextOp->Contents.Reg.Prev = Contents.Reg.Prev;
85 Contents.Reg.Prev = 0;
86 Contents.Reg.Next = 0;
89 void MachineOperand::setReg(unsigned Reg) {
90 if (getReg() == Reg) return; // No change.
92 // Otherwise, we have to change the register. If this operand is embedded
93 // into a machine function, we need to update the old and new register's
95 if (MachineInstr *MI = getParent())
96 if (MachineBasicBlock *MBB = MI->getParent())
97 if (MachineFunction *MF = MBB->getParent()) {
98 RemoveRegOperandFromRegInfo();
99 Contents.Reg.RegNo = Reg;
100 AddRegOperandToRegInfo(&MF->getRegInfo());
104 // Otherwise, just change the register, no problem. :)
105 Contents.Reg.RegNo = Reg;
108 /// ChangeToImmediate - Replace this operand with a new immediate operand of
109 /// the specified value. If an operand is known to be an immediate already,
110 /// the setImm method should be used.
111 void MachineOperand::ChangeToImmediate(int64_t ImmVal) {
112 // If this operand is currently a register operand, and if this is in a
113 // function, deregister the operand from the register's use/def list.
114 if (isReg() && getParent() && getParent()->getParent() &&
115 getParent()->getParent()->getParent())
116 RemoveRegOperandFromRegInfo();
118 OpKind = MO_Immediate;
119 Contents.ImmVal = ImmVal;
122 /// ChangeToRegister - Replace this operand with a new register operand of
123 /// the specified value. If an operand is known to be an register already,
124 /// the setReg method should be used.
125 void MachineOperand::ChangeToRegister(unsigned Reg, bool isDef, bool isImp,
126 bool isKill, bool isDead, bool isUndef) {
127 // If this operand is already a register operand, use setReg to update the
128 // register's use/def lists.
130 assert(!isEarlyClobber());
133 // Otherwise, change this to a register and set the reg#.
134 OpKind = MO_Register;
135 Contents.Reg.RegNo = Reg;
137 // If this operand is embedded in a function, add the operand to the
138 // register's use/def list.
139 if (MachineInstr *MI = getParent())
140 if (MachineBasicBlock *MBB = MI->getParent())
141 if (MachineFunction *MF = MBB->getParent())
142 AddRegOperandToRegInfo(&MF->getRegInfo());
150 IsEarlyClobber = false;
154 /// isIdenticalTo - Return true if this operand is identical to the specified
156 bool MachineOperand::isIdenticalTo(const MachineOperand &Other) const {
157 if (getType() != Other.getType() ||
158 getTargetFlags() != Other.getTargetFlags())
162 default: llvm_unreachable("Unrecognized operand type");
163 case MachineOperand::MO_Register:
164 return getReg() == Other.getReg() && isDef() == Other.isDef() &&
165 getSubReg() == Other.getSubReg();
166 case MachineOperand::MO_Immediate:
167 return getImm() == Other.getImm();
168 case MachineOperand::MO_FPImmediate:
169 return getFPImm() == Other.getFPImm();
170 case MachineOperand::MO_MachineBasicBlock:
171 return getMBB() == Other.getMBB();
172 case MachineOperand::MO_FrameIndex:
173 return getIndex() == Other.getIndex();
174 case MachineOperand::MO_ConstantPoolIndex:
175 return getIndex() == Other.getIndex() && getOffset() == Other.getOffset();
176 case MachineOperand::MO_JumpTableIndex:
177 return getIndex() == Other.getIndex();
178 case MachineOperand::MO_GlobalAddress:
179 return getGlobal() == Other.getGlobal() && getOffset() == Other.getOffset();
180 case MachineOperand::MO_ExternalSymbol:
181 return !strcmp(getSymbolName(), Other.getSymbolName()) &&
182 getOffset() == Other.getOffset();
186 /// print - Print the specified machine operand.
188 void MachineOperand::print(raw_ostream &OS, const TargetMachine *TM) const {
190 case MachineOperand::MO_Register:
191 if (getReg() == 0 || TargetRegisterInfo::isVirtualRegister(getReg())) {
192 OS << "%reg" << getReg();
194 // If the instruction is embedded into a basic block, we can find the
195 // target info for the instruction.
197 if (const MachineInstr *MI = getParent())
198 if (const MachineBasicBlock *MBB = MI->getParent())
199 if (const MachineFunction *MF = MBB->getParent())
200 TM = &MF->getTarget();
203 OS << "%" << TM->getRegisterInfo()->get(getReg()).Name;
205 OS << "%mreg" << getReg();
208 if (getSubReg() != 0)
209 OS << ':' << getSubReg();
211 if (isDef() || isKill() || isDead() || isImplicit() || isUndef() ||
214 bool NeedComma = false;
216 if (NeedComma) OS << ',';
217 OS << (isDef() ? "imp-def" : "imp-use");
219 } else if (isDef()) {
220 if (NeedComma) OS << ',';
221 if (isEarlyClobber())
222 OS << "earlyclobber,";
226 if (isKill() || isDead() || isUndef()) {
227 if (NeedComma) OS << ',';
228 if (isKill()) OS << "kill";
229 if (isDead()) OS << "dead";
231 if (isKill() || isDead())
239 case MachineOperand::MO_Immediate:
242 case MachineOperand::MO_FPImmediate:
243 if (getFPImm()->getType()->isFloatTy())
244 OS << getFPImm()->getValueAPF().convertToFloat();
246 OS << getFPImm()->getValueAPF().convertToDouble();
248 case MachineOperand::MO_MachineBasicBlock:
250 << ((Value*)getMBB()->getBasicBlock())->getName()
251 << "," << (void*)getMBB() << '>';
253 case MachineOperand::MO_FrameIndex:
254 OS << "<fi#" << getIndex() << '>';
256 case MachineOperand::MO_ConstantPoolIndex:
257 OS << "<cp#" << getIndex();
258 if (getOffset()) OS << "+" << getOffset();
261 case MachineOperand::MO_JumpTableIndex:
262 OS << "<jt#" << getIndex() << '>';
264 case MachineOperand::MO_GlobalAddress:
265 OS << "<ga:" << ((Value*)getGlobal())->getName();
266 if (getOffset()) OS << "+" << getOffset();
269 case MachineOperand::MO_ExternalSymbol:
270 OS << "<es:" << getSymbolName();
271 if (getOffset()) OS << "+" << getOffset();
275 llvm_unreachable("Unrecognized operand type");
278 if (unsigned TF = getTargetFlags())
279 OS << "[TF=" << TF << ']';
282 //===----------------------------------------------------------------------===//
283 // MachineMemOperand Implementation
284 //===----------------------------------------------------------------------===//
286 MachineMemOperand::MachineMemOperand(const Value *v, unsigned int f,
287 int64_t o, uint64_t s, unsigned int a)
288 : Offset(o), Size(s), V(v),
289 Flags((f & 7) | ((Log2_32(a) + 1) << 3)) {
290 assert(getBaseAlignment() == a && "Alignment is not a power of 2!");
291 assert((isLoad() || isStore()) && "Not a load/store!");
294 /// Profile - Gather unique data for the object.
296 void MachineMemOperand::Profile(FoldingSetNodeID &ID) const {
297 ID.AddInteger(Offset);
300 ID.AddInteger(Flags);
303 void MachineMemOperand::refineAlignment(const MachineMemOperand *MMO) {
304 // The Value and Offset may differ due to CSE. But the flags and size
305 // should be the same.
306 assert(MMO->getFlags() == getFlags() && "Flags mismatch!");
307 assert(MMO->getSize() == getSize() && "Size mismatch!");
309 if (MMO->getBaseAlignment() >= getBaseAlignment()) {
310 // Update the alignment value.
311 Flags = (Flags & 7) | ((Log2_32(MMO->getBaseAlignment()) + 1) << 3);
312 // Also update the base and offset, because the new alignment may
313 // not be applicable with the old ones.
315 Offset = MMO->getOffset();
319 /// getAlignment - Return the minimum known alignment in bytes of the
320 /// actual memory reference.
321 uint64_t MachineMemOperand::getAlignment() const {
322 return MinAlign(getBaseAlignment(), getOffset());
325 raw_ostream &llvm::operator<<(raw_ostream &OS, const MachineMemOperand &MMO) {
326 assert((MMO.isLoad() || MMO.isStore()) &&
327 "SV has to be a load, store or both.");
329 if (MMO.isVolatile())
338 // Print the address information.
343 WriteAsOperand(OS, MMO.getValue(), /*PrintType=*/false);
345 // If the alignment of the memory reference itself differs from the alignment
346 // of the base pointer, print the base alignment explicitly, next to the base
348 if (MMO.getBaseAlignment() != MMO.getAlignment())
349 OS << "(align=" << MMO.getBaseAlignment() << ")";
351 if (MMO.getOffset() != 0)
352 OS << "+" << MMO.getOffset();
355 // Print the alignment of the reference.
356 if (MMO.getBaseAlignment() != MMO.getAlignment() ||
357 MMO.getBaseAlignment() != MMO.getSize())
358 OS << "(align=" << MMO.getAlignment() << ")";
363 //===----------------------------------------------------------------------===//
364 // MachineInstr Implementation
365 //===----------------------------------------------------------------------===//
367 /// MachineInstr ctor - This constructor creates a dummy MachineInstr with
368 /// TID NULL and no operands.
369 MachineInstr::MachineInstr()
370 : TID(0), NumImplicitOps(0), MemRefs(0), MemRefsEnd(0),
371 Parent(0), debugLoc(DebugLoc::getUnknownLoc()) {
372 // Make sure that we get added to a machine basicblock
373 LeakDetector::addGarbageObject(this);
376 void MachineInstr::addImplicitDefUseOperands() {
377 if (TID->ImplicitDefs)
378 for (const unsigned *ImpDefs = TID->ImplicitDefs; *ImpDefs; ++ImpDefs)
379 addOperand(MachineOperand::CreateReg(*ImpDefs, true, true));
380 if (TID->ImplicitUses)
381 for (const unsigned *ImpUses = TID->ImplicitUses; *ImpUses; ++ImpUses)
382 addOperand(MachineOperand::CreateReg(*ImpUses, false, true));
385 /// MachineInstr ctor - This constructor create a MachineInstr and add the
386 /// implicit operands. It reserves space for number of operands specified by
387 /// TargetInstrDesc or the numOperands if it is not zero. (for
388 /// instructions with variable number of operands).
389 MachineInstr::MachineInstr(const TargetInstrDesc &tid, bool NoImp)
390 : TID(&tid), NumImplicitOps(0), MemRefs(0), MemRefsEnd(0), Parent(0),
391 debugLoc(DebugLoc::getUnknownLoc()) {
392 if (!NoImp && TID->getImplicitDefs())
393 for (const unsigned *ImpDefs = TID->getImplicitDefs(); *ImpDefs; ++ImpDefs)
395 if (!NoImp && TID->getImplicitUses())
396 for (const unsigned *ImpUses = TID->getImplicitUses(); *ImpUses; ++ImpUses)
398 Operands.reserve(NumImplicitOps + TID->getNumOperands());
400 addImplicitDefUseOperands();
401 // Make sure that we get added to a machine basicblock
402 LeakDetector::addGarbageObject(this);
405 /// MachineInstr ctor - As above, but with a DebugLoc.
406 MachineInstr::MachineInstr(const TargetInstrDesc &tid, const DebugLoc dl,
408 : TID(&tid), NumImplicitOps(0), MemRefs(0), MemRefsEnd(0),
409 Parent(0), debugLoc(dl) {
410 if (!NoImp && TID->getImplicitDefs())
411 for (const unsigned *ImpDefs = TID->getImplicitDefs(); *ImpDefs; ++ImpDefs)
413 if (!NoImp && TID->getImplicitUses())
414 for (const unsigned *ImpUses = TID->getImplicitUses(); *ImpUses; ++ImpUses)
416 Operands.reserve(NumImplicitOps + TID->getNumOperands());
418 addImplicitDefUseOperands();
419 // Make sure that we get added to a machine basicblock
420 LeakDetector::addGarbageObject(this);
423 /// MachineInstr ctor - Work exactly the same as the ctor two above, except
424 /// that the MachineInstr is created and added to the end of the specified
427 MachineInstr::MachineInstr(MachineBasicBlock *MBB, const TargetInstrDesc &tid)
428 : TID(&tid), NumImplicitOps(0), MemRefs(0), MemRefsEnd(0), Parent(0),
429 debugLoc(DebugLoc::getUnknownLoc()) {
430 assert(MBB && "Cannot use inserting ctor with null basic block!");
431 if (TID->ImplicitDefs)
432 for (const unsigned *ImpDefs = TID->getImplicitDefs(); *ImpDefs; ++ImpDefs)
434 if (TID->ImplicitUses)
435 for (const unsigned *ImpUses = TID->getImplicitUses(); *ImpUses; ++ImpUses)
437 Operands.reserve(NumImplicitOps + TID->getNumOperands());
438 addImplicitDefUseOperands();
439 // Make sure that we get added to a machine basicblock
440 LeakDetector::addGarbageObject(this);
441 MBB->push_back(this); // Add instruction to end of basic block!
444 /// MachineInstr ctor - As above, but with a DebugLoc.
446 MachineInstr::MachineInstr(MachineBasicBlock *MBB, const DebugLoc dl,
447 const TargetInstrDesc &tid)
448 : TID(&tid), NumImplicitOps(0), MemRefs(0), MemRefsEnd(0),
449 Parent(0), debugLoc(dl) {
450 assert(MBB && "Cannot use inserting ctor with null basic block!");
451 if (TID->ImplicitDefs)
452 for (const unsigned *ImpDefs = TID->getImplicitDefs(); *ImpDefs; ++ImpDefs)
454 if (TID->ImplicitUses)
455 for (const unsigned *ImpUses = TID->getImplicitUses(); *ImpUses; ++ImpUses)
457 Operands.reserve(NumImplicitOps + TID->getNumOperands());
458 addImplicitDefUseOperands();
459 // Make sure that we get added to a machine basicblock
460 LeakDetector::addGarbageObject(this);
461 MBB->push_back(this); // Add instruction to end of basic block!
464 /// MachineInstr ctor - Copies MachineInstr arg exactly
466 MachineInstr::MachineInstr(MachineFunction &MF, const MachineInstr &MI)
467 : TID(&MI.getDesc()), NumImplicitOps(0),
468 MemRefs(MI.MemRefs), MemRefsEnd(MI.MemRefsEnd),
469 Parent(0), debugLoc(MI.getDebugLoc()) {
470 Operands.reserve(MI.getNumOperands());
473 for (unsigned i = 0; i != MI.getNumOperands(); ++i)
474 addOperand(MI.getOperand(i));
475 NumImplicitOps = MI.NumImplicitOps;
477 // Set parent to null.
480 LeakDetector::addGarbageObject(this);
483 MachineInstr::~MachineInstr() {
484 LeakDetector::removeGarbageObject(this);
486 for (unsigned i = 0, e = Operands.size(); i != e; ++i) {
487 assert(Operands[i].ParentMI == this && "ParentMI mismatch!");
488 assert((!Operands[i].isReg() || !Operands[i].isOnRegUseList()) &&
489 "Reg operand def/use list corrupted");
494 /// getRegInfo - If this instruction is embedded into a MachineFunction,
495 /// return the MachineRegisterInfo object for the current function, otherwise
497 MachineRegisterInfo *MachineInstr::getRegInfo() {
498 if (MachineBasicBlock *MBB = getParent())
499 return &MBB->getParent()->getRegInfo();
503 /// RemoveRegOperandsFromUseLists - Unlink all of the register operands in
504 /// this instruction from their respective use lists. This requires that the
505 /// operands already be on their use lists.
506 void MachineInstr::RemoveRegOperandsFromUseLists() {
507 for (unsigned i = 0, e = Operands.size(); i != e; ++i) {
508 if (Operands[i].isReg())
509 Operands[i].RemoveRegOperandFromRegInfo();
513 /// AddRegOperandsToUseLists - Add all of the register operands in
514 /// this instruction from their respective use lists. This requires that the
515 /// operands not be on their use lists yet.
516 void MachineInstr::AddRegOperandsToUseLists(MachineRegisterInfo &RegInfo) {
517 for (unsigned i = 0, e = Operands.size(); i != e; ++i) {
518 if (Operands[i].isReg())
519 Operands[i].AddRegOperandToRegInfo(&RegInfo);
524 /// addOperand - Add the specified operand to the instruction. If it is an
525 /// implicit operand, it is added to the end of the operand list. If it is
526 /// an explicit operand it is added at the end of the explicit operand list
527 /// (before the first implicit operand).
528 void MachineInstr::addOperand(const MachineOperand &Op) {
529 bool isImpReg = Op.isReg() && Op.isImplicit();
530 assert((isImpReg || !OperandsComplete()) &&
531 "Trying to add an operand to a machine instr that is already done!");
533 MachineRegisterInfo *RegInfo = getRegInfo();
535 // If we are adding the operand to the end of the list, our job is simpler.
536 // This is true most of the time, so this is a reasonable optimization.
537 if (isImpReg || NumImplicitOps == 0) {
538 // We can only do this optimization if we know that the operand list won't
540 if (Operands.empty() || Operands.size()+1 <= Operands.capacity()) {
541 Operands.push_back(Op);
543 // Set the parent of the operand.
544 Operands.back().ParentMI = this;
546 // If the operand is a register, update the operand's use list.
548 Operands.back().AddRegOperandToRegInfo(RegInfo);
553 // Otherwise, we have to insert a real operand before any implicit ones.
554 unsigned OpNo = Operands.size()-NumImplicitOps;
556 // If this instruction isn't embedded into a function, then we don't need to
557 // update any operand lists.
559 // Simple insertion, no reginfo update needed for other register operands.
560 Operands.insert(Operands.begin()+OpNo, Op);
561 Operands[OpNo].ParentMI = this;
563 // Do explicitly set the reginfo for this operand though, to ensure the
564 // next/prev fields are properly nulled out.
565 if (Operands[OpNo].isReg())
566 Operands[OpNo].AddRegOperandToRegInfo(0);
568 } else if (Operands.size()+1 <= Operands.capacity()) {
569 // Otherwise, we have to remove register operands from their register use
570 // list, add the operand, then add the register operands back to their use
571 // list. This also must handle the case when the operand list reallocates
572 // to somewhere else.
574 // If insertion of this operand won't cause reallocation of the operand
575 // list, just remove the implicit operands, add the operand, then re-add all
576 // the rest of the operands.
577 for (unsigned i = OpNo, e = Operands.size(); i != e; ++i) {
578 assert(Operands[i].isReg() && "Should only be an implicit reg!");
579 Operands[i].RemoveRegOperandFromRegInfo();
582 // Add the operand. If it is a register, add it to the reg list.
583 Operands.insert(Operands.begin()+OpNo, Op);
584 Operands[OpNo].ParentMI = this;
586 if (Operands[OpNo].isReg())
587 Operands[OpNo].AddRegOperandToRegInfo(RegInfo);
589 // Re-add all the implicit ops.
590 for (unsigned i = OpNo+1, e = Operands.size(); i != e; ++i) {
591 assert(Operands[i].isReg() && "Should only be an implicit reg!");
592 Operands[i].AddRegOperandToRegInfo(RegInfo);
595 // Otherwise, we will be reallocating the operand list. Remove all reg
596 // operands from their list, then readd them after the operand list is
598 RemoveRegOperandsFromUseLists();
600 Operands.insert(Operands.begin()+OpNo, Op);
601 Operands[OpNo].ParentMI = this;
603 // Re-add all the operands.
604 AddRegOperandsToUseLists(*RegInfo);
608 /// RemoveOperand - Erase an operand from an instruction, leaving it with one
609 /// fewer operand than it started with.
611 void MachineInstr::RemoveOperand(unsigned OpNo) {
612 assert(OpNo < Operands.size() && "Invalid operand number");
614 // Special case removing the last one.
615 if (OpNo == Operands.size()-1) {
616 // If needed, remove from the reg def/use list.
617 if (Operands.back().isReg() && Operands.back().isOnRegUseList())
618 Operands.back().RemoveRegOperandFromRegInfo();
624 // Otherwise, we are removing an interior operand. If we have reginfo to
625 // update, remove all operands that will be shifted down from their reg lists,
626 // move everything down, then re-add them.
627 MachineRegisterInfo *RegInfo = getRegInfo();
629 for (unsigned i = OpNo, e = Operands.size(); i != e; ++i) {
630 if (Operands[i].isReg())
631 Operands[i].RemoveRegOperandFromRegInfo();
635 Operands.erase(Operands.begin()+OpNo);
638 for (unsigned i = OpNo, e = Operands.size(); i != e; ++i) {
639 if (Operands[i].isReg())
640 Operands[i].AddRegOperandToRegInfo(RegInfo);
645 /// addMemOperand - Add a MachineMemOperand to the machine instruction.
646 /// This function should be used only occasionally. The setMemRefs function
647 /// is the primary method for setting up a MachineInstr's MemRefs list.
648 void MachineInstr::addMemOperand(MachineFunction &MF,
649 MachineMemOperand *MO) {
650 mmo_iterator OldMemRefs = MemRefs;
651 mmo_iterator OldMemRefsEnd = MemRefsEnd;
653 size_t NewNum = (MemRefsEnd - MemRefs) + 1;
654 mmo_iterator NewMemRefs = MF.allocateMemRefsArray(NewNum);
655 mmo_iterator NewMemRefsEnd = NewMemRefs + NewNum;
657 std::copy(OldMemRefs, OldMemRefsEnd, NewMemRefs);
658 NewMemRefs[NewNum - 1] = MO;
660 MemRefs = NewMemRefs;
661 MemRefsEnd = NewMemRefsEnd;
664 /// removeFromParent - This method unlinks 'this' from the containing basic
665 /// block, and returns it, but does not delete it.
666 MachineInstr *MachineInstr::removeFromParent() {
667 assert(getParent() && "Not embedded in a basic block!");
668 getParent()->remove(this);
673 /// eraseFromParent - This method unlinks 'this' from the containing basic
674 /// block, and deletes it.
675 void MachineInstr::eraseFromParent() {
676 assert(getParent() && "Not embedded in a basic block!");
677 getParent()->erase(this);
681 /// OperandComplete - Return true if it's illegal to add a new operand
683 bool MachineInstr::OperandsComplete() const {
684 unsigned short NumOperands = TID->getNumOperands();
685 if (!TID->isVariadic() && getNumOperands()-NumImplicitOps >= NumOperands)
686 return true; // Broken: we have all the operands of this instruction!
690 /// getNumExplicitOperands - Returns the number of non-implicit operands.
692 unsigned MachineInstr::getNumExplicitOperands() const {
693 unsigned NumOperands = TID->getNumOperands();
694 if (!TID->isVariadic())
697 for (unsigned i = NumOperands, e = getNumOperands(); i != e; ++i) {
698 const MachineOperand &MO = getOperand(i);
699 if (!MO.isReg() || !MO.isImplicit())
706 /// isLabel - Returns true if the MachineInstr represents a label.
708 bool MachineInstr::isLabel() const {
709 return getOpcode() == TargetInstrInfo::DBG_LABEL ||
710 getOpcode() == TargetInstrInfo::EH_LABEL ||
711 getOpcode() == TargetInstrInfo::GC_LABEL;
714 /// isDebugLabel - Returns true if the MachineInstr represents a debug label.
716 bool MachineInstr::isDebugLabel() const {
717 return getOpcode() == TargetInstrInfo::DBG_LABEL;
720 /// findRegisterUseOperandIdx() - Returns the MachineOperand that is a use of
721 /// the specific register or -1 if it is not found. It further tightens
722 /// the search criteria to a use that kills the register if isKill is true.
723 int MachineInstr::findRegisterUseOperandIdx(unsigned Reg, bool isKill,
724 const TargetRegisterInfo *TRI) const {
725 for (unsigned i = 0, e = getNumOperands(); i != e; ++i) {
726 const MachineOperand &MO = getOperand(i);
727 if (!MO.isReg() || !MO.isUse())
729 unsigned MOReg = MO.getReg();
734 TargetRegisterInfo::isPhysicalRegister(MOReg) &&
735 TargetRegisterInfo::isPhysicalRegister(Reg) &&
736 TRI->isSubRegister(MOReg, Reg)))
737 if (!isKill || MO.isKill())
743 /// findRegisterDefOperandIdx() - Returns the operand index that is a def of
744 /// the specified register or -1 if it is not found. If isDead is true, defs
745 /// that are not dead are skipped. If TargetRegisterInfo is non-null, then it
746 /// also checks if there is a def of a super-register.
747 int MachineInstr::findRegisterDefOperandIdx(unsigned Reg, bool isDead,
748 const TargetRegisterInfo *TRI) const {
749 for (unsigned i = 0, e = getNumOperands(); i != e; ++i) {
750 const MachineOperand &MO = getOperand(i);
751 if (!MO.isReg() || !MO.isDef())
753 unsigned MOReg = MO.getReg();
756 TargetRegisterInfo::isPhysicalRegister(MOReg) &&
757 TargetRegisterInfo::isPhysicalRegister(Reg) &&
758 TRI->isSubRegister(MOReg, Reg)))
759 if (!isDead || MO.isDead())
765 /// findFirstPredOperandIdx() - Find the index of the first operand in the
766 /// operand list that is used to represent the predicate. It returns -1 if
768 int MachineInstr::findFirstPredOperandIdx() const {
769 const TargetInstrDesc &TID = getDesc();
770 if (TID.isPredicable()) {
771 for (unsigned i = 0, e = getNumOperands(); i != e; ++i)
772 if (TID.OpInfo[i].isPredicate())
779 /// isRegTiedToUseOperand - Given the index of a register def operand,
780 /// check if the register def is tied to a source operand, due to either
781 /// two-address elimination or inline assembly constraints. Returns the
782 /// first tied use operand index by reference is UseOpIdx is not null.
784 isRegTiedToUseOperand(unsigned DefOpIdx, unsigned *UseOpIdx) const {
785 if (getOpcode() == TargetInstrInfo::INLINEASM) {
786 assert(DefOpIdx >= 2);
787 const MachineOperand &MO = getOperand(DefOpIdx);
788 if (!MO.isReg() || !MO.isDef() || MO.getReg() == 0)
790 // Determine the actual operand index that corresponds to this index.
792 unsigned DefPart = 0;
793 for (unsigned i = 1, e = getNumOperands(); i < e; ) {
794 const MachineOperand &FMO = getOperand(i);
795 // After the normal asm operands there may be additional imp-def regs.
798 // Skip over this def.
799 unsigned NumOps = InlineAsm::getNumOperandRegisters(FMO.getImm());
800 unsigned PrevDef = i + 1;
801 i = PrevDef + NumOps;
803 DefPart = DefOpIdx - PrevDef;
808 for (unsigned i = 1, e = getNumOperands(); i != e; ++i) {
809 const MachineOperand &FMO = getOperand(i);
812 if (i+1 >= e || !getOperand(i+1).isReg() || !getOperand(i+1).isUse())
815 if (InlineAsm::isUseOperandTiedToDef(FMO.getImm(), Idx) &&
818 *UseOpIdx = (unsigned)i + 1 + DefPart;
825 assert(getOperand(DefOpIdx).isDef() && "DefOpIdx is not a def!");
826 const TargetInstrDesc &TID = getDesc();
827 for (unsigned i = 0, e = TID.getNumOperands(); i != e; ++i) {
828 const MachineOperand &MO = getOperand(i);
829 if (MO.isReg() && MO.isUse() &&
830 TID.getOperandConstraint(i, TOI::TIED_TO) == (int)DefOpIdx) {
832 *UseOpIdx = (unsigned)i;
839 /// isRegTiedToDefOperand - Return true if the operand of the specified index
840 /// is a register use and it is tied to an def operand. It also returns the def
841 /// operand index by reference.
843 isRegTiedToDefOperand(unsigned UseOpIdx, unsigned *DefOpIdx) const {
844 if (getOpcode() == TargetInstrInfo::INLINEASM) {
845 const MachineOperand &MO = getOperand(UseOpIdx);
846 if (!MO.isReg() || !MO.isUse() || MO.getReg() == 0)
849 // Find the flag operand corresponding to UseOpIdx
850 unsigned FlagIdx, NumOps=0;
851 for (FlagIdx = 1; FlagIdx < UseOpIdx; FlagIdx += NumOps+1) {
852 const MachineOperand &UFMO = getOperand(FlagIdx);
853 // After the normal asm operands there may be additional imp-def regs.
856 NumOps = InlineAsm::getNumOperandRegisters(UFMO.getImm());
857 assert(NumOps < getNumOperands() && "Invalid inline asm flag");
858 if (UseOpIdx < FlagIdx+NumOps+1)
861 if (FlagIdx >= UseOpIdx)
863 const MachineOperand &UFMO = getOperand(FlagIdx);
865 if (InlineAsm::isUseOperandTiedToDef(UFMO.getImm(), DefNo)) {
870 // Remember to adjust the index. First operand is asm string, then there
871 // is a flag for each.
873 const MachineOperand &FMO = getOperand(DefIdx);
875 // Skip over this def.
876 DefIdx += InlineAsm::getNumOperandRegisters(FMO.getImm()) + 1;
879 *DefOpIdx = DefIdx + UseOpIdx - FlagIdx;
885 const TargetInstrDesc &TID = getDesc();
886 if (UseOpIdx >= TID.getNumOperands())
888 const MachineOperand &MO = getOperand(UseOpIdx);
889 if (!MO.isReg() || !MO.isUse())
891 int DefIdx = TID.getOperandConstraint(UseOpIdx, TOI::TIED_TO);
895 *DefOpIdx = (unsigned)DefIdx;
899 /// copyKillDeadInfo - Copies kill / dead operand properties from MI.
901 void MachineInstr::copyKillDeadInfo(const MachineInstr *MI) {
902 for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
903 const MachineOperand &MO = MI->getOperand(i);
904 if (!MO.isReg() || (!MO.isKill() && !MO.isDead()))
906 for (unsigned j = 0, ee = getNumOperands(); j != ee; ++j) {
907 MachineOperand &MOp = getOperand(j);
908 if (!MOp.isIdenticalTo(MO))
919 /// copyPredicates - Copies predicate operand(s) from MI.
920 void MachineInstr::copyPredicates(const MachineInstr *MI) {
921 const TargetInstrDesc &TID = MI->getDesc();
922 if (!TID.isPredicable())
924 for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
925 if (TID.OpInfo[i].isPredicate()) {
926 // Predicated operands must be last operands.
927 addOperand(MI->getOperand(i));
932 /// isSafeToMove - Return true if it is safe to move this instruction. If
933 /// SawStore is set to true, it means that there is a store (or call) between
934 /// the instruction's location and its intended destination.
935 bool MachineInstr::isSafeToMove(const TargetInstrInfo *TII,
936 bool &SawStore) const {
937 // Ignore stuff that we obviously can't move.
938 if (TID->mayStore() || TID->isCall()) {
942 if (TID->isTerminator() || TID->hasUnmodeledSideEffects())
945 // See if this instruction does a load. If so, we have to guarantee that the
946 // loaded value doesn't change between the load and the its intended
947 // destination. The check for isInvariantLoad gives the targe the chance to
948 // classify the load as always returning a constant, e.g. a constant pool
950 if (TID->mayLoad() && !isInvariantLoad())
951 // Otherwise, this is a real load. If there is a store between the load and
952 // end of block, or if the load is volatile, we can't move it.
953 return !SawStore && !hasVolatileMemoryRef();
958 /// isSafeToReMat - Return true if it's safe to rematerialize the specified
959 /// instruction which defined the specified register instead of copying it.
960 bool MachineInstr::isSafeToReMat(const TargetInstrInfo *TII,
961 unsigned DstReg) const {
962 bool SawStore = false;
963 if (!TII->isTriviallyReMaterializable(this) ||
964 !isSafeToMove(TII, SawStore))
966 for (unsigned i = 0, e = getNumOperands(); i != e; ++i) {
967 const MachineOperand &MO = getOperand(i);
970 // FIXME: For now, do not remat any instruction with register operands.
971 // Later on, we can loosen the restriction is the register operands have
972 // not been modified between the def and use. Note, this is different from
973 // MachineSink because the code is no longer in two-address form (at least
977 else if (!MO.isDead() && MO.getReg() != DstReg)
983 /// hasVolatileMemoryRef - Return true if this instruction may have a
984 /// volatile memory reference, or if the information describing the
985 /// memory reference is not available. Return false if it is known to
986 /// have no volatile memory references.
987 bool MachineInstr::hasVolatileMemoryRef() const {
988 // An instruction known never to access memory won't have a volatile access.
989 if (!TID->mayStore() &&
992 !TID->hasUnmodeledSideEffects())
995 // Otherwise, if the instruction has no memory reference information,
996 // conservatively assume it wasn't preserved.
997 if (memoperands_empty())
1000 // Check the memory reference information for volatile references.
1001 for (mmo_iterator I = memoperands_begin(), E = memoperands_end(); I != E; ++I)
1002 if ((*I)->isVolatile())
1008 /// isInvariantLoad - Return true if this instruction is loading from a
1009 /// location whose value is invariant across the function. For example,
1010 /// loading a value from the constant pool or from from the argument area
1011 /// of a function if it does not change. This should only return true of
1012 /// *all* loads the instruction does are invariant (if it does multiple loads).
1013 bool MachineInstr::isInvariantLoad(AliasAnalysis *AA) const {
1014 // If the instruction doesn't load at all, it isn't an invariant load.
1015 if (!TID->mayLoad())
1018 // If the instruction has lost its memoperands, conservatively assume that
1019 // it may not be an invariant load.
1020 if (memoperands_empty())
1023 const MachineFrameInfo *MFI = getParent()->getParent()->getFrameInfo();
1025 for (mmo_iterator I = memoperands_begin(),
1026 E = memoperands_end(); I != E; ++I) {
1027 if ((*I)->isVolatile()) return false;
1028 if ((*I)->isStore()) return false;
1030 if (const Value *V = (*I)->getValue()) {
1031 // A load from a constant PseudoSourceValue is invariant.
1032 if (const PseudoSourceValue *PSV = dyn_cast<PseudoSourceValue>(V))
1033 if (PSV->isConstant(MFI))
1035 // If we have an AliasAnalysis, ask it whether the memory is constant.
1036 if (AA && AA->pointsToConstantMemory(V))
1040 // Otherwise assume conservatively.
1044 // Everything checks out.
1048 void MachineInstr::dump() const {
1049 errs() << " " << *this;
1052 void MachineInstr::print(raw_ostream &OS, const TargetMachine *TM) const {
1053 // Specialize printing if op#0 is definition
1054 unsigned StartOp = 0;
1055 if (getNumOperands() && getOperand(0).isReg() && getOperand(0).isDef()) {
1056 getOperand(0).print(OS, TM);
1058 ++StartOp; // Don't print this operand again!
1061 OS << getDesc().getName();
1063 for (unsigned i = StartOp, e = getNumOperands(); i != e; ++i) {
1067 getOperand(i).print(OS, TM);
1070 if (!memoperands_empty()) {
1072 for (mmo_iterator i = memoperands_begin(), e = memoperands_end();
1080 if (!debugLoc.isUnknown()) {
1081 const MachineFunction *MF = getParent()->getParent();
1082 DebugLocTuple DLT = MF->getDebugLocTuple(debugLoc);
1083 DICompileUnit CU(DLT.CompileUnit);
1085 << CU.getDirectory() << '/' << CU.getFilename() << ","
1093 bool MachineInstr::addRegisterKilled(unsigned IncomingReg,
1094 const TargetRegisterInfo *RegInfo,
1095 bool AddIfNotFound) {
1096 bool isPhysReg = TargetRegisterInfo::isPhysicalRegister(IncomingReg);
1097 bool hasAliases = isPhysReg && RegInfo->getAliasSet(IncomingReg);
1099 SmallVector<unsigned,4> DeadOps;
1100 for (unsigned i = 0, e = getNumOperands(); i != e; ++i) {
1101 MachineOperand &MO = getOperand(i);
1102 if (!MO.isReg() || !MO.isUse() || MO.isUndef())
1104 unsigned Reg = MO.getReg();
1108 if (Reg == IncomingReg) {
1111 // The register is already marked kill.
1113 if (isPhysReg && isRegTiedToDefOperand(i))
1114 // Two-address uses of physregs must not be marked kill.
1119 } else if (hasAliases && MO.isKill() &&
1120 TargetRegisterInfo::isPhysicalRegister(Reg)) {
1121 // A super-register kill already exists.
1122 if (RegInfo->isSuperRegister(IncomingReg, Reg))
1124 if (RegInfo->isSubRegister(IncomingReg, Reg))
1125 DeadOps.push_back(i);
1129 // Trim unneeded kill operands.
1130 while (!DeadOps.empty()) {
1131 unsigned OpIdx = DeadOps.back();
1132 if (getOperand(OpIdx).isImplicit())
1133 RemoveOperand(OpIdx);
1135 getOperand(OpIdx).setIsKill(false);
1139 // If not found, this means an alias of one of the operands is killed. Add a
1140 // new implicit operand if required.
1141 if (!Found && AddIfNotFound) {
1142 addOperand(MachineOperand::CreateReg(IncomingReg,
1151 bool MachineInstr::addRegisterDead(unsigned IncomingReg,
1152 const TargetRegisterInfo *RegInfo,
1153 bool AddIfNotFound) {
1154 bool isPhysReg = TargetRegisterInfo::isPhysicalRegister(IncomingReg);
1155 bool hasAliases = isPhysReg && RegInfo->getAliasSet(IncomingReg);
1157 SmallVector<unsigned,4> DeadOps;
1158 for (unsigned i = 0, e = getNumOperands(); i != e; ++i) {
1159 MachineOperand &MO = getOperand(i);
1160 if (!MO.isReg() || !MO.isDef())
1162 unsigned Reg = MO.getReg();
1166 if (Reg == IncomingReg) {
1169 // The register is already marked dead.
1174 } else if (hasAliases && MO.isDead() &&
1175 TargetRegisterInfo::isPhysicalRegister(Reg)) {
1176 // There exists a super-register that's marked dead.
1177 if (RegInfo->isSuperRegister(IncomingReg, Reg))
1179 if (RegInfo->getSubRegisters(IncomingReg) &&
1180 RegInfo->getSuperRegisters(Reg) &&
1181 RegInfo->isSubRegister(IncomingReg, Reg))
1182 DeadOps.push_back(i);
1186 // Trim unneeded dead operands.
1187 while (!DeadOps.empty()) {
1188 unsigned OpIdx = DeadOps.back();
1189 if (getOperand(OpIdx).isImplicit())
1190 RemoveOperand(OpIdx);
1192 getOperand(OpIdx).setIsDead(false);
1196 // If not found, this means an alias of one of the operands is dead. Add a
1197 // new implicit operand if required.
1198 if (Found || !AddIfNotFound)
1201 addOperand(MachineOperand::CreateReg(IncomingReg,