1 //===-- PrologEpilogInserter.cpp - Insert Prolog/Epilog code in function --===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This pass is responsible for finalizing the functions frame layout, saving
11 // callee saved registers, and for emitting prolog & epilog code for the
14 // This pass must be run after register allocation. After this pass is
15 // executed, it is illegal to construct MO_FrameIndex operands.
17 // This pass provides an optional shrink wrapping variant of prolog/epilog
18 // insertion, enabled via --shrink-wrap. See ShrinkWrapping.cpp.
20 //===----------------------------------------------------------------------===//
22 #include "PrologEpilogInserter.h"
23 #include "llvm/CodeGen/MachineDominators.h"
24 #include "llvm/CodeGen/MachineLoopInfo.h"
25 #include "llvm/CodeGen/MachineInstr.h"
26 #include "llvm/CodeGen/MachineFrameInfo.h"
27 #include "llvm/CodeGen/MachineRegisterInfo.h"
28 #include "llvm/CodeGen/RegisterScavenging.h"
29 #include "llvm/Target/TargetMachine.h"
30 #include "llvm/Target/TargetRegisterInfo.h"
31 #include "llvm/Target/TargetFrameInfo.h"
32 #include "llvm/Target/TargetInstrInfo.h"
33 #include "llvm/Support/CommandLine.h"
34 #include "llvm/Support/Compiler.h"
35 #include "llvm/ADT/IndexedMap.h"
36 #include "llvm/ADT/STLExtras.h"
43 static RegisterPass<PEI>
44 X("prologepilog", "Prologue/Epilogue Insertion");
46 /// createPrologEpilogCodeInserter - This function returns a pass that inserts
47 /// prolog and epilog code, and eliminates abstract frame references.
49 FunctionPass *llvm::createPrologEpilogCodeInserter() { return new PEI(); }
51 /// runOnMachineFunction - Insert prolog/epilog code and replace abstract
52 /// frame indexes with appropriate references.
54 bool PEI::runOnMachineFunction(MachineFunction &Fn) {
55 const Function* F = Fn.getFunction();
56 const TargetRegisterInfo *TRI = Fn.getTarget().getRegisterInfo();
57 RS = TRI->requiresRegisterScavenging(Fn) ? new RegScavenger() : NULL;
58 FrameIndexVirtualScavenging = TRI->requiresFrameIndexScavenging(Fn);
59 FrameConstantRegMap.clear();
61 // Calculate the MaxCallFrameSize and HasCalls variables for the function's
62 // frame information. Also eliminates call frame pseudo instructions.
63 calculateCallsInformation(Fn);
65 // Allow the target machine to make some adjustments to the function
66 // e.g. UsedPhysRegs before calculateCalleeSavedRegisters.
67 TRI->processFunctionBeforeCalleeSavedScan(Fn, RS);
69 // Scan the function for modified callee saved registers and insert spill code
70 // for any callee saved registers that are modified.
71 calculateCalleeSavedRegisters(Fn);
73 // Determine placement of CSR spill/restore code:
74 // - with shrink wrapping, place spills and restores to tightly
75 // enclose regions in the Machine CFG of the function where
76 // they are used. Without shrink wrapping
77 // - default (no shrink wrapping), place all spills in the
78 // entry block, all restores in return blocks.
79 placeCSRSpillsAndRestores(Fn);
81 // Add the code to save and restore the callee saved registers
82 if (!F->hasFnAttr(Attribute::Naked))
83 insertCSRSpillsAndRestores(Fn);
85 // Allow the target machine to make final modifications to the function
86 // before the frame layout is finalized.
87 TRI->processFunctionBeforeFrameFinalized(Fn);
89 // Calculate actual frame offsets for all abstract stack objects...
90 calculateFrameObjectOffsets(Fn);
92 // Add prolog and epilog code to the function. This function is required
93 // to align the stack frame as necessary for any stack variables or
94 // called functions. Because of this, calculateCalleeSavedRegisters
95 // must be called before this function in order to set the HasCalls
96 // and MaxCallFrameSize variables.
97 if (!F->hasFnAttr(Attribute::Naked))
98 insertPrologEpilogCode(Fn);
100 // Replace all MO_FrameIndex operands with physical register references
101 // and actual offsets.
103 replaceFrameIndices(Fn);
105 // If register scavenging is needed, as we've enabled doing it as a
106 // post-pass, scavenge the virtual registers that frame index elimiation
108 if (TRI->requiresRegisterScavenging(Fn) && FrameIndexVirtualScavenging)
109 scavengeFrameVirtualRegs(Fn);
117 void PEI::getAnalysisUsage(AnalysisUsage &AU) const {
118 AU.setPreservesCFG();
119 if (ShrinkWrapping || ShrinkWrapFunc != "") {
120 AU.addRequired<MachineLoopInfo>();
121 AU.addRequired<MachineDominatorTree>();
123 AU.addPreserved<MachineLoopInfo>();
124 AU.addPreserved<MachineDominatorTree>();
125 MachineFunctionPass::getAnalysisUsage(AU);
129 /// calculateCallsInformation - Calculate the MaxCallFrameSize and HasCalls
130 /// variables for the function's frame information and eliminate call frame
131 /// pseudo instructions.
132 void PEI::calculateCallsInformation(MachineFunction &Fn) {
133 const TargetRegisterInfo *RegInfo = Fn.getTarget().getRegisterInfo();
134 MachineFrameInfo *MFI = Fn.getFrameInfo();
136 unsigned MaxCallFrameSize = 0;
137 bool HasCalls = MFI->hasCalls();
139 // Get the function call frame set-up and tear-down instruction opcode
140 int FrameSetupOpcode = RegInfo->getCallFrameSetupOpcode();
141 int FrameDestroyOpcode = RegInfo->getCallFrameDestroyOpcode();
143 // Early exit for targets which have no call frame setup/destroy pseudo
145 if (FrameSetupOpcode == -1 && FrameDestroyOpcode == -1)
148 std::vector<MachineBasicBlock::iterator> FrameSDOps;
149 for (MachineFunction::iterator BB = Fn.begin(), E = Fn.end(); BB != E; ++BB)
150 for (MachineBasicBlock::iterator I = BB->begin(); I != BB->end(); ++I)
151 if (I->getOpcode() == FrameSetupOpcode ||
152 I->getOpcode() == FrameDestroyOpcode) {
153 assert(I->getNumOperands() >= 1 && "Call Frame Setup/Destroy Pseudo"
154 " instructions should have a single immediate argument!");
155 unsigned Size = I->getOperand(0).getImm();
156 if (Size > MaxCallFrameSize) MaxCallFrameSize = Size;
158 FrameSDOps.push_back(I);
159 } else if (I->isInlineAsm()) {
160 // An InlineAsm might be a call; assume it is to get the stack frame
161 // aligned correctly for calls.
165 MFI->setHasCalls(HasCalls);
166 MFI->setMaxCallFrameSize(MaxCallFrameSize);
168 for (std::vector<MachineBasicBlock::iterator>::iterator
169 i = FrameSDOps.begin(), e = FrameSDOps.end(); i != e; ++i) {
170 MachineBasicBlock::iterator I = *i;
172 // If call frames are not being included as part of the stack frame, and
173 // the target doesn't indicate otherwise, remove the call frame pseudos
174 // here. The sub/add sp instruction pairs are still inserted, but we don't
175 // need to track the SP adjustment for frame index elimination.
176 if (RegInfo->canSimplifyCallFramePseudos(Fn))
177 RegInfo->eliminateCallFramePseudoInstr(Fn, *I->getParent(), I);
182 /// calculateCalleeSavedRegisters - Scan the function for modified callee saved
184 void PEI::calculateCalleeSavedRegisters(MachineFunction &Fn) {
185 const TargetRegisterInfo *RegInfo = Fn.getTarget().getRegisterInfo();
186 const TargetFrameInfo *TFI = Fn.getTarget().getFrameInfo();
187 MachineFrameInfo *MFI = Fn.getFrameInfo();
189 // Get the callee saved register list...
190 const unsigned *CSRegs = RegInfo->getCalleeSavedRegs(&Fn);
192 // These are used to keep track the callee-save area. Initialize them.
193 MinCSFrameIndex = INT_MAX;
196 // Early exit for targets which have no callee saved registers.
197 if (CSRegs == 0 || CSRegs[0] == 0)
200 // In Naked functions we aren't going to save any registers.
201 if (Fn.getFunction()->hasFnAttr(Attribute::Naked))
204 // Figure out which *callee saved* registers are modified by the current
205 // function, thus needing to be saved and restored in the prolog/epilog.
206 const TargetRegisterClass * const *CSRegClasses =
207 RegInfo->getCalleeSavedRegClasses(&Fn);
209 std::vector<CalleeSavedInfo> CSI;
210 for (unsigned i = 0; CSRegs[i]; ++i) {
211 unsigned Reg = CSRegs[i];
212 if (Fn.getRegInfo().isPhysRegUsed(Reg)) {
213 // If the reg is modified, save it!
214 CSI.push_back(CalleeSavedInfo(Reg, CSRegClasses[i]));
216 for (const unsigned *AliasSet = RegInfo->getAliasSet(Reg);
217 *AliasSet; ++AliasSet) { // Check alias registers too.
218 if (Fn.getRegInfo().isPhysRegUsed(*AliasSet)) {
219 CSI.push_back(CalleeSavedInfo(Reg, CSRegClasses[i]));
227 return; // Early exit if no callee saved registers are modified!
229 unsigned NumFixedSpillSlots;
230 const TargetFrameInfo::SpillSlot *FixedSpillSlots =
231 TFI->getCalleeSavedSpillSlots(NumFixedSpillSlots);
233 // Now that we know which registers need to be saved and restored, allocate
234 // stack slots for them.
235 for (std::vector<CalleeSavedInfo>::iterator
236 I = CSI.begin(), E = CSI.end(); I != E; ++I) {
237 unsigned Reg = I->getReg();
238 const TargetRegisterClass *RC = I->getRegClass();
241 if (RegInfo->hasReservedSpillSlot(Fn, Reg, FrameIdx)) {
242 I->setFrameIdx(FrameIdx);
246 // Check to see if this physreg must be spilled to a particular stack slot
248 const TargetFrameInfo::SpillSlot *FixedSlot = FixedSpillSlots;
249 while (FixedSlot != FixedSpillSlots+NumFixedSpillSlots &&
250 FixedSlot->Reg != Reg)
253 if (FixedSlot == FixedSpillSlots + NumFixedSpillSlots) {
254 // Nope, just spill it anywhere convenient.
255 unsigned Align = RC->getAlignment();
256 unsigned StackAlign = TFI->getStackAlignment();
258 // We may not be able to satisfy the desired alignment specification of
259 // the TargetRegisterClass if the stack alignment is smaller. Use the
261 Align = std::min(Align, StackAlign);
262 FrameIdx = MFI->CreateStackObject(RC->getSize(), Align, true);
263 if ((unsigned)FrameIdx < MinCSFrameIndex) MinCSFrameIndex = FrameIdx;
264 if ((unsigned)FrameIdx > MaxCSFrameIndex) MaxCSFrameIndex = FrameIdx;
266 // Spill it to the stack where we must.
267 FrameIdx = MFI->CreateFixedObject(RC->getSize(), FixedSlot->Offset,
271 I->setFrameIdx(FrameIdx);
274 MFI->setCalleeSavedInfo(CSI);
277 /// insertCSRSpillsAndRestores - Insert spill and restore code for
278 /// callee saved registers used in the function, handling shrink wrapping.
280 void PEI::insertCSRSpillsAndRestores(MachineFunction &Fn) {
281 // Get callee saved register information.
282 MachineFrameInfo *MFI = Fn.getFrameInfo();
283 const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo();
285 MFI->setCalleeSavedInfoValid(true);
287 // Early exit if no callee saved registers are modified!
291 const TargetInstrInfo &TII = *Fn.getTarget().getInstrInfo();
292 const TargetRegisterInfo *TRI = Fn.getTarget().getRegisterInfo();
293 MachineBasicBlock::iterator I;
295 if (! ShrinkWrapThisFunction) {
296 // Spill using target interface.
297 I = EntryBlock->begin();
298 if (!TII.spillCalleeSavedRegisters(*EntryBlock, I, CSI)) {
299 for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
300 // Add the callee-saved register as live-in.
301 // It's killed at the spill.
302 EntryBlock->addLiveIn(CSI[i].getReg());
304 // Insert the spill to the stack frame.
305 TII.storeRegToStackSlot(*EntryBlock, I, CSI[i].getReg(), true,
306 CSI[i].getFrameIdx(), CSI[i].getRegClass(),TRI);
310 // Restore using target interface.
311 for (unsigned ri = 0, re = ReturnBlocks.size(); ri != re; ++ri) {
312 MachineBasicBlock* MBB = ReturnBlocks[ri];
315 // Skip over all terminator instructions, which are part of the return
317 MachineBasicBlock::iterator I2 = I;
318 while (I2 != MBB->begin() && (--I2)->getDesc().isTerminator())
321 bool AtStart = I == MBB->begin();
322 MachineBasicBlock::iterator BeforeI = I;
326 // Restore all registers immediately before the return and any
327 // terminators that preceed it.
328 if (!TII.restoreCalleeSavedRegisters(*MBB, I, CSI)) {
329 for (unsigned i = 0, e = CSI.size(); i != e; ++i) {
330 TII.loadRegFromStackSlot(*MBB, I, CSI[i].getReg(),
331 CSI[i].getFrameIdx(),
332 CSI[i].getRegClass(), TRI);
333 assert(I != MBB->begin() &&
334 "loadRegFromStackSlot didn't insert any code!");
335 // Insert in reverse order. loadRegFromStackSlot can insert
336 // multiple instructions.
350 std::vector<CalleeSavedInfo> blockCSI;
351 for (CSRegBlockMap::iterator BI = CSRSave.begin(),
352 BE = CSRSave.end(); BI != BE; ++BI) {
353 MachineBasicBlock* MBB = BI->first;
354 CSRegSet save = BI->second;
360 for (CSRegSet::iterator RI = save.begin(),
361 RE = save.end(); RI != RE; ++RI) {
362 blockCSI.push_back(CSI[*RI]);
364 assert(blockCSI.size() > 0 &&
365 "Could not collect callee saved register info");
369 // When shrink wrapping, use stack slot stores/loads.
370 for (unsigned i = 0, e = blockCSI.size(); i != e; ++i) {
371 // Add the callee-saved register as live-in.
372 // It's killed at the spill.
373 MBB->addLiveIn(blockCSI[i].getReg());
375 // Insert the spill to the stack frame.
376 TII.storeRegToStackSlot(*MBB, I, blockCSI[i].getReg(),
378 blockCSI[i].getFrameIdx(),
379 blockCSI[i].getRegClass(), TRI);
383 for (CSRegBlockMap::iterator BI = CSRRestore.begin(),
384 BE = CSRRestore.end(); BI != BE; ++BI) {
385 MachineBasicBlock* MBB = BI->first;
386 CSRegSet restore = BI->second;
392 for (CSRegSet::iterator RI = restore.begin(),
393 RE = restore.end(); RI != RE; ++RI) {
394 blockCSI.push_back(CSI[*RI]);
396 assert(blockCSI.size() > 0 &&
397 "Could not find callee saved register info");
399 // If MBB is empty and needs restores, insert at the _beginning_.
406 // Skip over all terminator instructions, which are part of the
408 if (! I->getDesc().isTerminator()) {
411 MachineBasicBlock::iterator I2 = I;
412 while (I2 != MBB->begin() && (--I2)->getDesc().isTerminator())
417 bool AtStart = I == MBB->begin();
418 MachineBasicBlock::iterator BeforeI = I;
422 // Restore all registers immediately before the return and any
423 // terminators that preceed it.
424 for (unsigned i = 0, e = blockCSI.size(); i != e; ++i) {
425 TII.loadRegFromStackSlot(*MBB, I, blockCSI[i].getReg(),
426 blockCSI[i].getFrameIdx(),
427 blockCSI[i].getRegClass(), TRI);
428 assert(I != MBB->begin() &&
429 "loadRegFromStackSlot didn't insert any code!");
430 // Insert in reverse order. loadRegFromStackSlot can insert
431 // multiple instructions.
442 /// AdjustStackOffset - Helper function used to adjust the stack frame offset.
444 AdjustStackOffset(MachineFrameInfo *MFI, int FrameIdx,
445 bool StackGrowsDown, int64_t &Offset,
446 unsigned &MaxAlign) {
447 // If the stack grows down, add the object size to find the lowest address.
449 Offset += MFI->getObjectSize(FrameIdx);
451 unsigned Align = MFI->getObjectAlignment(FrameIdx);
453 // If the alignment of this object is greater than that of the stack, then
454 // increase the stack alignment to match.
455 MaxAlign = std::max(MaxAlign, Align);
457 // Adjust to alignment boundary.
458 Offset = (Offset + Align - 1) / Align * Align;
460 if (StackGrowsDown) {
461 MFI->setObjectOffset(FrameIdx, -Offset); // Set the computed offset
463 MFI->setObjectOffset(FrameIdx, Offset);
464 Offset += MFI->getObjectSize(FrameIdx);
468 /// calculateFrameObjectOffsets - Calculate actual frame offsets for all of the
469 /// abstract stack objects.
471 void PEI::calculateFrameObjectOffsets(MachineFunction &Fn) {
472 const TargetFrameInfo &TFI = *Fn.getTarget().getFrameInfo();
474 bool StackGrowsDown =
475 TFI.getStackGrowthDirection() == TargetFrameInfo::StackGrowsDown;
477 // Loop over all of the stack objects, assigning sequential addresses...
478 MachineFrameInfo *MFI = Fn.getFrameInfo();
480 // Start at the beginning of the local area.
481 // The Offset is the distance from the stack top in the direction
482 // of stack growth -- so it's always nonnegative.
483 int LocalAreaOffset = TFI.getOffsetOfLocalArea();
485 LocalAreaOffset = -LocalAreaOffset;
486 assert(LocalAreaOffset >= 0
487 && "Local area offset should be in direction of stack growth");
488 int64_t Offset = LocalAreaOffset;
490 // If there are fixed sized objects that are preallocated in the local area,
491 // non-fixed objects can't be allocated right at the start of local area.
492 // We currently don't support filling in holes in between fixed sized
493 // objects, so we adjust 'Offset' to point to the end of last fixed sized
494 // preallocated object.
495 for (int i = MFI->getObjectIndexBegin(); i != 0; ++i) {
497 if (StackGrowsDown) {
498 // The maximum distance from the stack pointer is at lower address of
499 // the object -- which is given by offset. For down growing stack
500 // the offset is negative, so we negate the offset to get the distance.
501 FixedOff = -MFI->getObjectOffset(i);
503 // The maximum distance from the start pointer is at the upper
504 // address of the object.
505 FixedOff = MFI->getObjectOffset(i) + MFI->getObjectSize(i);
507 if (FixedOff > Offset) Offset = FixedOff;
510 // First assign frame offsets to stack objects that are used to spill
511 // callee saved registers.
512 if (StackGrowsDown) {
513 for (unsigned i = MinCSFrameIndex; i <= MaxCSFrameIndex; ++i) {
514 // If the stack grows down, we need to add the size to find the lowest
515 // address of the object.
516 Offset += MFI->getObjectSize(i);
518 unsigned Align = MFI->getObjectAlignment(i);
519 // Adjust to alignment boundary
520 Offset = (Offset+Align-1)/Align*Align;
522 MFI->setObjectOffset(i, -Offset); // Set the computed offset
525 int MaxCSFI = MaxCSFrameIndex, MinCSFI = MinCSFrameIndex;
526 for (int i = MaxCSFI; i >= MinCSFI ; --i) {
527 unsigned Align = MFI->getObjectAlignment(i);
528 // Adjust to alignment boundary
529 Offset = (Offset+Align-1)/Align*Align;
531 MFI->setObjectOffset(i, Offset);
532 Offset += MFI->getObjectSize(i);
536 unsigned MaxAlign = MFI->getMaxAlignment();
538 // Make sure the special register scavenging spill slot is closest to the
539 // frame pointer if a frame pointer is required.
540 const TargetRegisterInfo *RegInfo = Fn.getTarget().getRegisterInfo();
541 if (RS && RegInfo->hasFP(Fn) && !RegInfo->needsStackRealignment(Fn)) {
542 int SFI = RS->getScavengingFrameIndex();
544 AdjustStackOffset(MFI, SFI, StackGrowsDown, Offset, MaxAlign);
547 // Make sure that the stack protector comes before the local variables on the
549 if (MFI->getStackProtectorIndex() >= 0)
550 AdjustStackOffset(MFI, MFI->getStackProtectorIndex(), StackGrowsDown,
553 // Then assign frame offsets to stack objects that are not used to spill
554 // callee saved registers.
555 for (unsigned i = 0, e = MFI->getObjectIndexEnd(); i != e; ++i) {
556 if (i >= MinCSFrameIndex && i <= MaxCSFrameIndex)
558 if (RS && (int)i == RS->getScavengingFrameIndex())
560 if (MFI->isDeadObjectIndex(i))
562 if (MFI->getStackProtectorIndex() == (int)i)
565 AdjustStackOffset(MFI, i, StackGrowsDown, Offset, MaxAlign);
568 // Make sure the special register scavenging spill slot is closest to the
570 if (RS && (!RegInfo->hasFP(Fn) || RegInfo->needsStackRealignment(Fn))) {
571 int SFI = RS->getScavengingFrameIndex();
573 AdjustStackOffset(MFI, SFI, StackGrowsDown, Offset, MaxAlign);
576 if (!RegInfo->targetHandlesStackFrameRounding()) {
577 // If we have reserved argument space for call sites in the function
578 // immediately on entry to the current function, count it as part of the
579 // overall stack size.
580 if (MFI->hasCalls() && RegInfo->hasReservedCallFrame(Fn))
581 Offset += MFI->getMaxCallFrameSize();
583 // Round up the size to a multiple of the alignment. If the function has
584 // any calls or alloca's, align to the target's StackAlignment value to
585 // ensure that the callee's frame or the alloca data is suitably aligned;
586 // otherwise, for leaf functions, align to the TransientStackAlignment
589 if (MFI->hasCalls() || MFI->hasVarSizedObjects() ||
590 (RegInfo->needsStackRealignment(Fn) && MFI->getObjectIndexEnd() != 0))
591 StackAlign = TFI.getStackAlignment();
593 StackAlign = TFI.getTransientStackAlignment();
594 // If the frame pointer is eliminated, all frame offsets will be relative
595 // to SP not FP; align to MaxAlign so this works.
596 StackAlign = std::max(StackAlign, MaxAlign);
597 unsigned AlignMask = StackAlign - 1;
598 Offset = (Offset + AlignMask) & ~uint64_t(AlignMask);
601 // Update frame info to pretend that this is part of the stack...
602 MFI->setStackSize(Offset - LocalAreaOffset);
606 /// insertPrologEpilogCode - Scan the function for modified callee saved
607 /// registers, insert spill code for these callee saved registers, then add
608 /// prolog and epilog code to the function.
610 void PEI::insertPrologEpilogCode(MachineFunction &Fn) {
611 const TargetRegisterInfo *TRI = Fn.getTarget().getRegisterInfo();
613 // Add prologue to the function...
614 TRI->emitPrologue(Fn);
616 // Add epilogue to restore the callee-save registers in each exiting block
617 for (MachineFunction::iterator I = Fn.begin(), E = Fn.end(); I != E; ++I) {
618 // If last instruction is a return instruction, add an epilogue
619 if (!I->empty() && I->back().getDesc().isReturn())
620 TRI->emitEpilogue(Fn, *I);
625 /// replaceFrameIndices - Replace all MO_FrameIndex operands with physical
626 /// register references and actual offsets.
628 void PEI::replaceFrameIndices(MachineFunction &Fn) {
629 if (!Fn.getFrameInfo()->hasStackObjects()) return; // Nothing to do?
631 const TargetMachine &TM = Fn.getTarget();
632 assert(TM.getRegisterInfo() && "TM::getRegisterInfo() must be implemented!");
633 const TargetRegisterInfo &TRI = *TM.getRegisterInfo();
634 const TargetFrameInfo *TFI = TM.getFrameInfo();
635 bool StackGrowsDown =
636 TFI->getStackGrowthDirection() == TargetFrameInfo::StackGrowsDown;
637 int FrameSetupOpcode = TRI.getCallFrameSetupOpcode();
638 int FrameDestroyOpcode = TRI.getCallFrameDestroyOpcode();
640 for (MachineFunction::iterator BB = Fn.begin(),
641 E = Fn.end(); BB != E; ++BB) {
642 int SPAdj = 0; // SP offset due to call frame setup / destroy.
643 if (RS && !FrameIndexVirtualScavenging) RS->enterBasicBlock(BB);
645 for (MachineBasicBlock::iterator I = BB->begin(); I != BB->end(); ) {
647 if (I->getOpcode() == FrameSetupOpcode ||
648 I->getOpcode() == FrameDestroyOpcode) {
649 // Remember how much SP has been adjusted to create the call
651 int Size = I->getOperand(0).getImm();
653 if ((!StackGrowsDown && I->getOpcode() == FrameSetupOpcode) ||
654 (StackGrowsDown && I->getOpcode() == FrameDestroyOpcode))
659 MachineBasicBlock::iterator PrevI = BB->end();
660 if (I != BB->begin()) PrevI = prior(I);
661 TRI.eliminateCallFramePseudoInstr(Fn, *BB, I);
663 // Visit the instructions created by eliminateCallFramePseudoInstr().
664 if (PrevI == BB->end())
665 I = BB->begin(); // The replaced instr was the first in the block.
667 I = llvm::next(PrevI);
671 MachineInstr *MI = I;
673 for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i)
674 if (MI->getOperand(i).isFI()) {
675 // Some instructions (e.g. inline asm instructions) can have
676 // multiple frame indices and/or cause eliminateFrameIndex
677 // to insert more than one instruction. We need the register
678 // scavenger to go through all of these instructions so that
679 // it can update its register information. We keep the
680 // iterator at the point before insertion so that we can
681 // revisit them in full.
682 bool AtBeginning = (I == BB->begin());
683 if (!AtBeginning) --I;
685 // If this instruction has a FrameIndex operand, we need to
686 // use that target machine register info object to eliminate
688 TargetRegisterInfo::FrameIndexValue Value;
690 TRI.eliminateFrameIndex(MI, SPAdj, &Value,
691 FrameIndexVirtualScavenging ? NULL : RS);
693 assert (FrameIndexVirtualScavenging &&
694 "Not scavenging, but virtual returned from "
695 "eliminateFrameIndex()!");
696 FrameConstantRegMap[VReg] = FrameConstantEntry(Value, SPAdj);
699 // Reset the iterator if we were at the beginning of the BB.
709 if (DoIncr && I != BB->end()) ++I;
711 // Update register states.
712 if (RS && !FrameIndexVirtualScavenging && MI) RS->forward(MI);
715 assert(SPAdj == 0 && "Unbalanced call frame setup / destroy pairs?");
719 /// findLastUseReg - find the killing use of the specified register within
720 /// the instruciton range. Return the operand number of the kill in Operand.
721 static MachineBasicBlock::iterator
722 findLastUseReg(MachineBasicBlock::iterator I, MachineBasicBlock::iterator ME,
724 // Scan forward to find the last use of this virtual register
725 for (++I; I != ME; ++I) {
726 MachineInstr *MI = I;
727 bool isDefInsn = false;
728 bool isKillInsn = false;
729 for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i)
730 if (MI->getOperand(i).isReg()) {
731 unsigned OpReg = MI->getOperand(i).getReg();
732 if (OpReg == 0 || !TargetRegisterInfo::isVirtualRegister(OpReg))
735 && "overlapping use of scavenged index register!");
736 // If this is the killing use, we have a candidate.
737 if (MI->getOperand(i).isKill())
739 else if (MI->getOperand(i).isDef())
742 if (isKillInsn && !isDefInsn)
745 // If we hit the end of the basic block, there was no kill of
746 // the virtual register, which is wrong.
747 assert (0 && "scavenged index register never killed!");
751 /// scavengeFrameVirtualRegs - Replace all frame index virtual registers
752 /// with physical registers. Use the register scavenger to find an
753 /// appropriate register to use.
754 void PEI::scavengeFrameVirtualRegs(MachineFunction &Fn) {
755 // Run through the instructions and find any virtual registers.
756 for (MachineFunction::iterator BB = Fn.begin(),
757 E = Fn.end(); BB != E; ++BB) {
758 RS->enterBasicBlock(BB);
760 // FIXME: The logic flow in this function is still too convoluted.
761 // It needs a cleanup refactoring. Do that in preparation for tracking
762 // more than one scratch register value and using ranges to find
763 // available scratch registers.
764 unsigned CurrentVirtReg = 0;
765 unsigned CurrentScratchReg = 0;
766 bool havePrevValue = false;
767 TargetRegisterInfo::FrameIndexValue PrevValue(0,0);
768 TargetRegisterInfo::FrameIndexValue Value(0,0);
769 MachineInstr *PrevLastUseMI = NULL;
770 unsigned PrevLastUseOp = 0;
771 bool trackingCurrentValue = false;
774 // The instruction stream may change in the loop, so check BB->end()
776 for (MachineBasicBlock::iterator I = BB->begin(); I != BB->end(); ) {
777 MachineInstr *MI = I;
778 bool isDefInsn = false;
779 bool isKillInsn = false;
780 bool clobbersScratchReg = false;
782 for (unsigned i = 0, e = MI->getNumOperands(); i != e; ++i) {
783 if (MI->getOperand(i).isReg()) {
784 MachineOperand &MO = MI->getOperand(i);
785 unsigned Reg = MO.getReg();
788 if (!TargetRegisterInfo::isVirtualRegister(Reg)) {
789 // If we have a previous scratch reg, check and see if anything
790 // here kills whatever value is in there.
791 if (Reg == CurrentScratchReg) {
793 // Two-address operands implicitly kill
794 if (MO.isKill() || MI->isRegTiedToDefOperand(i))
795 clobbersScratchReg = true;
798 clobbersScratchReg = true;
803 // If this is a def, remember that this insn defines the value.
804 // This lets us properly consider insns which re-use the scratch
805 // register, such as r2 = sub r2, #imm, in the middle of the
810 // Have we already allocated a scratch register for this virtual?
811 if (Reg != CurrentVirtReg) {
812 // When we first encounter a new virtual register, it
813 // must be a definition.
814 assert(MI->getOperand(i).isDef() &&
815 "frame index virtual missing def!");
816 // We can't have nested virtual register live ranges because
817 // there's only a guarantee of one scavenged register at a time.
818 assert (CurrentVirtReg == 0 &&
819 "overlapping frame index virtual registers!");
821 // If the target gave us information about what's in the register,
822 // we can use that to re-use scratch regs.
823 DenseMap<unsigned, FrameConstantEntry>::iterator Entry =
824 FrameConstantRegMap.find(Reg);
825 trackingCurrentValue = Entry != FrameConstantRegMap.end();
826 if (trackingCurrentValue) {
827 SPAdj = (*Entry).second.second;
828 Value = (*Entry).second.first;
835 // If the scratch register from the last allocation is still
836 // available, see if the value matches. If it does, just re-use it.
837 if (trackingCurrentValue && havePrevValue && PrevValue == Value) {
838 // FIXME: This assumes that the instructions in the live range
839 // for the virtual register are exclusively for the purpose
840 // of populating the value in the register. That's reasonable
841 // for these frame index registers, but it's still a very, very
842 // strong assumption. rdar://7322732. Better would be to
843 // explicitly check each instruction in the range for references
844 // to the virtual register. Only delete those insns that
845 // touch the virtual register.
847 // Find the last use of the new virtual register. Remove all
848 // instruction between here and there, and update the current
849 // instruction to reference the last use insn instead.
850 MachineBasicBlock::iterator LastUseMI =
851 findLastUseReg(I, BB->end(), Reg);
853 // Remove all instructions up 'til the last use, since they're
854 // just calculating the value we already have.
855 BB->erase(I, LastUseMI);
858 // Extend the live range of the scratch register
859 PrevLastUseMI->getOperand(PrevLastUseOp).setIsKill(false);
860 RS->setUsed(CurrentScratchReg);
861 CurrentVirtReg = Reg;
863 // We deleted the instruction we were scanning the operands of.
864 // Jump back to the instruction iterator loop. Don't increment
865 // past this instruction since we updated the iterator already.
870 // Scavenge a new scratch register
871 CurrentVirtReg = Reg;
872 const TargetRegisterClass *RC = Fn.getRegInfo().getRegClass(Reg);
873 CurrentScratchReg = RS->FindUnusedReg(RC);
874 if (CurrentScratchReg == 0)
875 // No register is "free". Scavenge a register.
876 CurrentScratchReg = RS->scavengeRegister(RC, I, SPAdj);
880 // replace this reference to the virtual register with the
882 assert (CurrentScratchReg && "Missing scratch register!");
883 MI->getOperand(i).setReg(CurrentScratchReg);
885 if (MI->getOperand(i).isKill()) {
892 // If this is the last use of the scratch, stop tracking it. The
893 // last use will be a kill operand in an instruction that does
894 // not also define the scratch register.
895 if (isKillInsn && !isDefInsn) {
897 havePrevValue = trackingCurrentValue;
899 // Similarly, notice if instruction clobbered the value in the
900 // register we're tracking for possible later reuse. This is noted
901 // above, but enforced here since the value is still live while we
902 // process the rest of the operands of the instruction.
903 if (clobbersScratchReg) {
904 havePrevValue = false;
905 CurrentScratchReg = 0;