1 //===-- PPCISelLowering.h - PPC32 DAG Lowering Interface --------*- C++ -*-===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file defines the interfaces that PPC uses to lower LLVM code into a
13 //===----------------------------------------------------------------------===//
15 #ifndef LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
16 #define LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
19 #include "PPCInstrInfo.h"
20 #include "PPCRegisterInfo.h"
21 #include "PPCSubtarget.h"
22 #include "llvm/CodeGen/CallingConvLower.h"
23 #include "llvm/CodeGen/SelectionDAG.h"
24 #include "llvm/Target/TargetLowering.h"
29 // Start the numbering where the builtin ops and target ops leave off.
30 FIRST_NUMBER = ISD::BUILTIN_OP_END,
32 /// FSEL - Traditional three-operand fsel node.
36 /// FCFID - The FCFID instruction, taking an f64 operand and producing
37 /// and f64 value containing the FP representation of the integer that
38 /// was temporarily in the f64 operand.
41 /// Newer FCFID[US] integer-to-floating-point conversion instructions for
42 /// unsigned integers and single-precision outputs.
43 FCFIDU, FCFIDS, FCFIDUS,
45 /// FCTI[D,W]Z - The FCTIDZ and FCTIWZ instructions, taking an f32 or f64
46 /// operand, producing an f64 value containing the integer representation
50 /// Newer FCTI[D,W]UZ floating-point-to-integer conversion instructions for
51 /// unsigned integers.
54 /// Reciprocal estimate instructions (unary FP ops).
57 // VMADDFP, VNMSUBFP - The VMADDFP and VNMSUBFP instructions, taking
58 // three v4f32 operands and producing a v4f32 result.
61 /// VPERM - The PPC VPERM Instruction.
65 /// Hi/Lo - These represent the high and low 16-bit parts of a global
66 /// address respectively. These nodes have two operands, the first of
67 /// which must be a TargetGlobalAddress, and the second of which must be a
68 /// Constant. Selected naively, these turn into 'lis G+C' and 'li G+C',
69 /// though these are usually folded into other nodes.
74 /// The following three target-specific nodes are used for calls through
75 /// function pointers in the 64-bit SVR4 ABI.
77 /// Restore the TOC from the TOC save area of the current stack frame.
78 /// This is basically a hard coded load instruction which additionally
79 /// takes/produces a flag.
82 /// Like a regular LOAD but additionally taking/producing a flag.
85 /// LOAD into r2 (also taking/producing a flag). Like TOC_RESTORE, this is
86 /// a hard coded load instruction.
89 /// OPRC, CHAIN = DYNALLOC(CHAIN, NEGSIZE, FRAME_INDEX)
90 /// This instruction is lowered in PPCRegisterInfo::eliminateFrameIndex to
91 /// compute an allocation on the stack.
94 /// GlobalBaseReg - On Darwin, this node represents the result of the mflr
95 /// at function entry, used for PIC code.
98 /// These nodes represent the 32-bit PPC shifts that operate on 6-bit
99 /// shift amounts. These nodes are generated by the multi-precision shift
103 /// CALL - A direct function call.
104 /// CALL_NOP is a call with the special NOP which follows 64-bit
108 /// CHAIN,FLAG = MTCTR(VAL, CHAIN[, INFLAG]) - Directly corresponds to a
109 /// MTCTR instruction.
112 /// CHAIN,FLAG = BCTRL(CHAIN, INFLAG) - Directly corresponds to a
113 /// BCTRL instruction.
116 /// Return with a flag operand, matched by 'blr'
119 /// R32 = MFOCRF(CRREG, INFLAG) - Represents the MFOCRF instruction.
120 /// This copies the bits corresponding to the specified CRREG into the
121 /// resultant GPR. Bits corresponding to other CR regs are undefined.
124 // EH_SJLJ_SETJMP - SjLj exception handling setjmp.
127 // EH_SJLJ_LONGJMP - SjLj exception handling longjmp.
130 /// RESVEC = VCMP(LHS, RHS, OPC) - Represents one of the altivec VCMP*
131 /// instructions. For lack of better number, we use the opcode number
132 /// encoding for the OPC field to identify the compare. For example, 838
136 /// RESVEC, OUTFLAG = VCMPo(LHS, RHS, OPC) - Represents one of the
137 /// altivec VCMP*o instructions. For lack of better number, we use the
138 /// opcode number encoding for the OPC field to identify the compare. For
139 /// example, 838 is VCMPGTSH.
142 /// CHAIN = COND_BRANCH CHAIN, CRRC, OPC, DESTBB [, INFLAG] - This
143 /// corresponds to the COND_BRANCH pseudo instruction. CRRC is the
144 /// condition register to branch on, OPC is the branch opcode to use (e.g.
145 /// PPC::BLE), DESTBB is the destination block to branch to, and INFLAG is
146 /// an optional input flag argument.
149 /// CHAIN = BDNZ CHAIN, DESTBB - These are used to create counter-based
153 /// F8RC = FADDRTZ F8RC, F8RC - This is an FADD done with rounding
154 /// towards zero. Used only as part of the long double-to-int
155 /// conversion sequence.
158 /// F8RC = MFFS - This moves the FPSCR (not modeled) into the register.
161 /// LARX = This corresponds to PPC l{w|d}arx instrcution: load and
162 /// reserve indexed. This is used to implement atomic operations.
165 /// STCX = This corresponds to PPC stcx. instrcution: store conditional
166 /// indexed. This is used to implement atomic operations.
169 /// TC_RETURN - A tail call return.
171 /// operand #1 callee (register or absolute)
172 /// operand #2 stack adjustment
173 /// operand #3 optional in flag
176 /// ch, gl = CR6[UN]SET ch, inglue - Toggle CR bit 6 for SVR4 vararg calls
180 /// GPRC = address of _GLOBAL_OFFSET_TABLE_. Used by initial-exec TLS
184 /// G8RC = ADDIS_GOT_TPREL_HA %X2, Symbol - Used by the initial-exec
185 /// TLS model, produces an ADDIS8 instruction that adds the GOT
186 /// base to sym\@got\@tprel\@ha.
189 /// G8RC = LD_GOT_TPREL_L Symbol, G8RReg - Used by the initial-exec
190 /// TLS model, produces a LD instruction with base register G8RReg
191 /// and offset sym\@got\@tprel\@l. This completes the addition that
192 /// finds the offset of "sym" relative to the thread pointer.
195 /// G8RC = ADD_TLS G8RReg, Symbol - Used by the initial-exec TLS
196 /// model, produces an ADD instruction that adds the contents of
197 /// G8RReg to the thread pointer. Symbol contains a relocation
198 /// sym\@tls which is to be replaced by the thread pointer and
199 /// identifies to the linker that the instruction is part of a
203 /// G8RC = ADDIS_TLSGD_HA %X2, Symbol - For the general-dynamic TLS
204 /// model, produces an ADDIS8 instruction that adds the GOT base
205 /// register to sym\@got\@tlsgd\@ha.
208 /// G8RC = ADDI_TLSGD_L G8RReg, Symbol - For the general-dynamic TLS
209 /// model, produces an ADDI8 instruction that adds G8RReg to
210 /// sym\@got\@tlsgd\@l.
213 /// G8RC = GET_TLS_ADDR %X3, Symbol - For the general-dynamic TLS
214 /// model, produces a call to __tls_get_addr(sym\@tlsgd).
217 /// G8RC = ADDIS_TLSLD_HA %X2, Symbol - For the local-dynamic TLS
218 /// model, produces an ADDIS8 instruction that adds the GOT base
219 /// register to sym\@got\@tlsld\@ha.
222 /// G8RC = ADDI_TLSLD_L G8RReg, Symbol - For the local-dynamic TLS
223 /// model, produces an ADDI8 instruction that adds G8RReg to
224 /// sym\@got\@tlsld\@l.
227 /// G8RC = GET_TLSLD_ADDR %X3, Symbol - For the local-dynamic TLS
228 /// model, produces a call to __tls_get_addr(sym\@tlsld).
231 /// G8RC = ADDIS_DTPREL_HA %X3, Symbol, Chain - For the
232 /// local-dynamic TLS model, produces an ADDIS8 instruction
233 /// that adds X3 to sym\@dtprel\@ha. The Chain operand is needed
234 /// to tie this in place following a copy to %X3 from the result
235 /// of a GET_TLSLD_ADDR.
238 /// G8RC = ADDI_DTPREL_L G8RReg, Symbol - For the local-dynamic TLS
239 /// model, produces an ADDI8 instruction that adds G8RReg to
240 /// sym\@got\@dtprel\@l.
243 /// VRRC = VADD_SPLAT Elt, EltSize - Temporary node to be expanded
244 /// during instruction selection to optimize a BUILD_VECTOR into
245 /// operations on splats. This is necessary to avoid losing these
246 /// optimizations due to constant folding.
249 /// CHAIN = SC CHAIN, Imm128 - System call. The 7-bit unsigned
250 /// operand identifies the operating system entry point.
253 /// CHAIN = STBRX CHAIN, GPRC, Ptr, Type - This is a
254 /// byte-swapping store instruction. It byte-swaps the low "Type" bits of
255 /// the GPRC input, then stores it through Ptr. Type can be either i16 or
257 STBRX = ISD::FIRST_TARGET_MEMORY_OPCODE,
259 /// GPRC, CHAIN = LBRX CHAIN, Ptr, Type - This is a
260 /// byte-swapping load instruction. It loads "Type" bits, byte swaps it,
261 /// then puts it in the bottom bits of the GPRC. TYPE can be either i16
265 /// STFIWX - The STFIWX instruction. The first operand is an input token
266 /// chain, then an f64 value to store, then an address to store it to.
269 /// GPRC, CHAIN = LFIWAX CHAIN, Ptr - This is a floating-point
270 /// load which sign-extends from a 32-bit integer value into the
271 /// destination 64-bit register.
274 /// GPRC, CHAIN = LFIWZX CHAIN, Ptr - This is a floating-point
275 /// load which zero-extends from a 32-bit integer value into the
276 /// destination 64-bit register.
279 /// G8RC = ADDIS_TOC_HA %X2, Symbol - For medium and large code model,
280 /// produces an ADDIS8 instruction that adds the TOC base register to
284 /// G8RC = LD_TOC_L Symbol, G8RReg - For medium and large code model,
285 /// produces a LD instruction with base register G8RReg and offset
286 /// sym\@toc\@l. Preceded by an ADDIS_TOC_HA to form a full 32-bit offset.
289 /// G8RC = ADDI_TOC_L G8RReg, Symbol - For medium code model, produces
290 /// an ADDI8 instruction that adds G8RReg to sym\@toc\@l.
291 /// Preceded by an ADDIS_TOC_HA to form a full 32-bit offset.
296 /// Define some predicates that are used for node matching.
298 /// isVPKUHUMShuffleMask - Return true if this is the shuffle mask for a
299 /// VPKUHUM instruction.
300 bool isVPKUHUMShuffleMask(ShuffleVectorSDNode *N, bool isUnary);
302 /// isVPKUWUMShuffleMask - Return true if this is the shuffle mask for a
303 /// VPKUWUM instruction.
304 bool isVPKUWUMShuffleMask(ShuffleVectorSDNode *N, bool isUnary);
306 /// isVMRGLShuffleMask - Return true if this is a shuffle mask suitable for
307 /// a VRGL* instruction with the specified unit size (1,2 or 4 bytes).
308 bool isVMRGLShuffleMask(ShuffleVectorSDNode *N, unsigned UnitSize,
311 /// isVMRGHShuffleMask - Return true if this is a shuffle mask suitable for
312 /// a VRGH* instruction with the specified unit size (1,2 or 4 bytes).
313 bool isVMRGHShuffleMask(ShuffleVectorSDNode *N, unsigned UnitSize,
316 /// isVSLDOIShuffleMask - If this is a vsldoi shuffle mask, return the shift
317 /// amount, otherwise return -1.
318 int isVSLDOIShuffleMask(SDNode *N, bool isUnary);
320 /// isSplatShuffleMask - Return true if the specified VECTOR_SHUFFLE operand
321 /// specifies a splat of a single element that is suitable for input to
322 /// VSPLTB/VSPLTH/VSPLTW.
323 bool isSplatShuffleMask(ShuffleVectorSDNode *N, unsigned EltSize);
325 /// isAllNegativeZeroVector - Returns true if all elements of build_vector
327 bool isAllNegativeZeroVector(SDNode *N);
329 /// getVSPLTImmediate - Return the appropriate VSPLT* immediate to splat the
330 /// specified isSplatShuffleMask VECTOR_SHUFFLE mask.
331 unsigned getVSPLTImmediate(SDNode *N, unsigned EltSize);
333 /// get_VSPLTI_elt - If this is a build_vector of constants which can be
334 /// formed by using a vspltis[bhw] instruction of the specified element
335 /// size, return the constant being splatted. The ByteSize field indicates
336 /// the number of bytes of each element [124] -> [bhw].
337 SDValue get_VSPLTI_elt(SDNode *N, unsigned ByteSize, SelectionDAG &DAG);
340 class PPCTargetLowering : public TargetLowering {
341 const PPCSubtarget &PPCSubTarget;
344 explicit PPCTargetLowering(PPCTargetMachine &TM);
346 /// getTargetNodeName() - This method returns the name of a target specific
348 virtual const char *getTargetNodeName(unsigned Opcode) const;
350 virtual MVT getScalarShiftAmountTy(EVT LHSTy) const { return MVT::i32; }
352 /// getSetCCResultType - Return the ISD::SETCC ValueType
353 virtual EVT getSetCCResultType(LLVMContext &Context, EVT VT) const;
355 /// getPreIndexedAddressParts - returns true by value, base pointer and
356 /// offset pointer and addressing mode by reference if the node's address
357 /// can be legally represented as pre-indexed load / store address.
358 virtual bool getPreIndexedAddressParts(SDNode *N, SDValue &Base,
360 ISD::MemIndexedMode &AM,
361 SelectionDAG &DAG) const;
363 /// SelectAddressRegReg - Given the specified addressed, check to see if it
364 /// can be represented as an indexed [r+r] operation. Returns false if it
365 /// can be more efficiently represented with [r+imm].
366 bool SelectAddressRegReg(SDValue N, SDValue &Base, SDValue &Index,
367 SelectionDAG &DAG) const;
369 /// SelectAddressRegImm - Returns true if the address N can be represented
370 /// by a base register plus a signed 16-bit displacement [r+imm], and if it
371 /// is not better represented as reg+reg. If Aligned is true, only accept
372 /// displacements suitable for STD and friends, i.e. multiples of 4.
373 bool SelectAddressRegImm(SDValue N, SDValue &Disp, SDValue &Base,
374 SelectionDAG &DAG, bool Aligned) const;
376 /// SelectAddressRegRegOnly - Given the specified addressed, force it to be
377 /// represented as an indexed [r+r] operation.
378 bool SelectAddressRegRegOnly(SDValue N, SDValue &Base, SDValue &Index,
379 SelectionDAG &DAG) const;
381 Sched::Preference getSchedulingPreference(SDNode *N) const;
383 /// LowerOperation - Provide custom lowering hooks for some operations.
385 virtual SDValue LowerOperation(SDValue Op, SelectionDAG &DAG) const;
387 /// ReplaceNodeResults - Replace the results of node with an illegal result
388 /// type with new values built out of custom code.
390 virtual void ReplaceNodeResults(SDNode *N, SmallVectorImpl<SDValue>&Results,
391 SelectionDAG &DAG) const;
393 virtual SDValue PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const;
395 virtual void computeMaskedBitsForTargetNode(const SDValue Op,
398 const SelectionDAG &DAG,
399 unsigned Depth = 0) const;
401 virtual MachineBasicBlock *
402 EmitInstrWithCustomInserter(MachineInstr *MI,
403 MachineBasicBlock *MBB) const;
404 MachineBasicBlock *EmitAtomicBinary(MachineInstr *MI,
405 MachineBasicBlock *MBB, bool is64Bit,
406 unsigned BinOpcode) const;
407 MachineBasicBlock *EmitPartwordAtomicBinary(MachineInstr *MI,
408 MachineBasicBlock *MBB,
409 bool is8bit, unsigned Opcode) const;
411 MachineBasicBlock *emitEHSjLjSetJmp(MachineInstr *MI,
412 MachineBasicBlock *MBB) const;
414 MachineBasicBlock *emitEHSjLjLongJmp(MachineInstr *MI,
415 MachineBasicBlock *MBB) const;
417 ConstraintType getConstraintType(const std::string &Constraint) const;
419 /// Examine constraint string and operand type and determine a weight value.
420 /// The operand object must already have been set up with the operand type.
421 ConstraintWeight getSingleConstraintMatchWeight(
422 AsmOperandInfo &info, const char *constraint) const;
424 std::pair<unsigned, const TargetRegisterClass*>
425 getRegForInlineAsmConstraint(const std::string &Constraint,
428 /// getByValTypeAlignment - Return the desired alignment for ByVal aggregate
429 /// function arguments in the caller parameter area. This is the actual
430 /// alignment, not its logarithm.
431 unsigned getByValTypeAlignment(Type *Ty) const;
433 /// LowerAsmOperandForConstraint - Lower the specified operand into the Ops
434 /// vector. If it is invalid, don't add anything to Ops.
435 virtual void LowerAsmOperandForConstraint(SDValue Op,
436 std::string &Constraint,
437 std::vector<SDValue> &Ops,
438 SelectionDAG &DAG) const;
440 /// isLegalAddressingMode - Return true if the addressing mode represented
441 /// by AM is legal for this target, for a load/store of the specified type.
442 virtual bool isLegalAddressingMode(const AddrMode &AM, Type *Ty)const;
444 virtual bool isOffsetFoldingLegal(const GlobalAddressSDNode *GA) const;
446 /// getOptimalMemOpType - Returns the target specific optimal type for load
447 /// and store operations as a result of memset, memcpy, and memmove
448 /// lowering. If DstAlign is zero that means it's safe to destination
449 /// alignment can satisfy any constraint. Similarly if SrcAlign is zero it
450 /// means there isn't a need to check it against alignment requirement,
451 /// probably because the source does not need to be loaded. If 'IsMemset' is
452 /// true, that means it's expanding a memset. If 'ZeroMemset' is true, that
453 /// means it's a memset of zero. 'MemcpyStrSrc' indicates whether the memcpy
454 /// source is constant so it does not need to be loaded.
455 /// It returns EVT::Other if the type should be determined using generic
456 /// target-independent logic.
458 getOptimalMemOpType(uint64_t Size, unsigned DstAlign, unsigned SrcAlign,
459 bool IsMemset, bool ZeroMemset, bool MemcpyStrSrc,
460 MachineFunction &MF) const;
462 /// Is unaligned memory access allowed for the given type, and is it fast
463 /// relative to software emulation.
464 virtual bool allowsUnalignedMemoryAccesses(EVT VT, bool *Fast = 0) const;
466 /// isFMAFasterThanFMulAndFAdd - Return true if an FMA operation is faster
467 /// than a pair of fmul and fadd instructions. fmuladd intrinsics will be
468 /// expanded to FMAs when this method returns true, otherwise fmuladd is
469 /// expanded to fmul + fadd.
470 virtual bool isFMAFasterThanFMulAndFAdd(EVT VT) const;
472 /// createFastISel - This method returns a target-specific FastISel object,
473 /// or null if the target does not support "fast" instruction selection.
474 virtual FastISel *createFastISel(FunctionLoweringInfo &FuncInfo,
475 const TargetLibraryInfo *LibInfo) const;
478 SDValue getFramePointerFrameIndex(SelectionDAG & DAG) const;
479 SDValue getReturnAddrFrameIndex(SelectionDAG & DAG) const;
482 IsEligibleForTailCallOptimization(SDValue Callee,
483 CallingConv::ID CalleeCC,
485 const SmallVectorImpl<ISD::InputArg> &Ins,
486 SelectionDAG& DAG) const;
488 SDValue EmitTailCallLoadFPAndRetAddr(SelectionDAG & DAG,
496 SDValue LowerRETURNADDR(SDValue Op, SelectionDAG &DAG) const;
497 SDValue LowerFRAMEADDR(SDValue Op, SelectionDAG &DAG) const;
498 SDValue LowerConstantPool(SDValue Op, SelectionDAG &DAG) const;
499 SDValue LowerBlockAddress(SDValue Op, SelectionDAG &DAG) const;
500 SDValue LowerGlobalTLSAddress(SDValue Op, SelectionDAG &DAG) const;
501 SDValue LowerGlobalAddress(SDValue Op, SelectionDAG &DAG) const;
502 SDValue LowerJumpTable(SDValue Op, SelectionDAG &DAG) const;
503 SDValue LowerSETCC(SDValue Op, SelectionDAG &DAG) const;
504 SDValue LowerINIT_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const;
505 SDValue LowerADJUST_TRAMPOLINE(SDValue Op, SelectionDAG &DAG) const;
506 SDValue LowerVASTART(SDValue Op, SelectionDAG &DAG,
507 const PPCSubtarget &Subtarget) const;
508 SDValue LowerVAARG(SDValue Op, SelectionDAG &DAG,
509 const PPCSubtarget &Subtarget) const;
510 SDValue LowerVACOPY(SDValue Op, SelectionDAG &DAG,
511 const PPCSubtarget &Subtarget) const;
512 SDValue LowerSTACKRESTORE(SDValue Op, SelectionDAG &DAG,
513 const PPCSubtarget &Subtarget) const;
514 SDValue LowerDYNAMIC_STACKALLOC(SDValue Op, SelectionDAG &DAG,
515 const PPCSubtarget &Subtarget) const;
516 SDValue LowerSELECT_CC(SDValue Op, SelectionDAG &DAG) const;
517 SDValue LowerFP_TO_INT(SDValue Op, SelectionDAG &DAG, SDLoc dl) const;
518 SDValue LowerINT_TO_FP(SDValue Op, SelectionDAG &DAG) const;
519 SDValue LowerFLT_ROUNDS_(SDValue Op, SelectionDAG &DAG) const;
520 SDValue LowerSHL_PARTS(SDValue Op, SelectionDAG &DAG) const;
521 SDValue LowerSRL_PARTS(SDValue Op, SelectionDAG &DAG) const;
522 SDValue LowerSRA_PARTS(SDValue Op, SelectionDAG &DAG) const;
523 SDValue LowerBUILD_VECTOR(SDValue Op, SelectionDAG &DAG) const;
524 SDValue LowerVECTOR_SHUFFLE(SDValue Op, SelectionDAG &DAG) const;
525 SDValue LowerINTRINSIC_WO_CHAIN(SDValue Op, SelectionDAG &DAG) const;
526 SDValue LowerSCALAR_TO_VECTOR(SDValue Op, SelectionDAG &DAG) const;
527 SDValue LowerMUL(SDValue Op, SelectionDAG &DAG) const;
529 SDValue LowerCallResult(SDValue Chain, SDValue InFlag,
530 CallingConv::ID CallConv, bool isVarArg,
531 const SmallVectorImpl<ISD::InputArg> &Ins,
532 SDLoc dl, SelectionDAG &DAG,
533 SmallVectorImpl<SDValue> &InVals) const;
534 SDValue FinishCall(CallingConv::ID CallConv, SDLoc dl, bool isTailCall,
537 SmallVector<std::pair<unsigned, SDValue>, 8>
539 SDValue InFlag, SDValue Chain,
541 int SPDiff, unsigned NumBytes,
542 const SmallVectorImpl<ISD::InputArg> &Ins,
543 SmallVectorImpl<SDValue> &InVals) const;
546 LowerFormalArguments(SDValue Chain,
547 CallingConv::ID CallConv, bool isVarArg,
548 const SmallVectorImpl<ISD::InputArg> &Ins,
549 SDLoc dl, SelectionDAG &DAG,
550 SmallVectorImpl<SDValue> &InVals) const;
553 LowerCall(TargetLowering::CallLoweringInfo &CLI,
554 SmallVectorImpl<SDValue> &InVals) const;
557 CanLowerReturn(CallingConv::ID CallConv, MachineFunction &MF,
559 const SmallVectorImpl<ISD::OutputArg> &Outs,
560 LLVMContext &Context) const;
563 LowerReturn(SDValue Chain,
564 CallingConv::ID CallConv, bool isVarArg,
565 const SmallVectorImpl<ISD::OutputArg> &Outs,
566 const SmallVectorImpl<SDValue> &OutVals,
567 SDLoc dl, SelectionDAG &DAG) const;
570 extendArgForPPC64(ISD::ArgFlagsTy Flags, EVT ObjectVT, SelectionDAG &DAG,
571 SDValue ArgVal, SDLoc dl) const;
574 setMinReservedArea(MachineFunction &MF, SelectionDAG &DAG,
575 unsigned nAltivecParamsAtEnd,
576 unsigned MinReservedArea, bool isPPC64) const;
579 LowerFormalArguments_Darwin(SDValue Chain,
580 CallingConv::ID CallConv, bool isVarArg,
581 const SmallVectorImpl<ISD::InputArg> &Ins,
582 SDLoc dl, SelectionDAG &DAG,
583 SmallVectorImpl<SDValue> &InVals) const;
585 LowerFormalArguments_64SVR4(SDValue Chain,
586 CallingConv::ID CallConv, bool isVarArg,
587 const SmallVectorImpl<ISD::InputArg> &Ins,
588 SDLoc dl, SelectionDAG &DAG,
589 SmallVectorImpl<SDValue> &InVals) const;
591 LowerFormalArguments_32SVR4(SDValue Chain,
592 CallingConv::ID CallConv, bool isVarArg,
593 const SmallVectorImpl<ISD::InputArg> &Ins,
594 SDLoc dl, SelectionDAG &DAG,
595 SmallVectorImpl<SDValue> &InVals) const;
598 createMemcpyOutsideCallSeq(SDValue Arg, SDValue PtrOff,
599 SDValue CallSeqStart, ISD::ArgFlagsTy Flags,
600 SelectionDAG &DAG, SDLoc dl) const;
603 LowerCall_Darwin(SDValue Chain, SDValue Callee,
604 CallingConv::ID CallConv,
605 bool isVarArg, bool isTailCall,
606 const SmallVectorImpl<ISD::OutputArg> &Outs,
607 const SmallVectorImpl<SDValue> &OutVals,
608 const SmallVectorImpl<ISD::InputArg> &Ins,
609 SDLoc dl, SelectionDAG &DAG,
610 SmallVectorImpl<SDValue> &InVals) const;
612 LowerCall_64SVR4(SDValue Chain, SDValue Callee,
613 CallingConv::ID CallConv,
614 bool isVarArg, bool isTailCall,
615 const SmallVectorImpl<ISD::OutputArg> &Outs,
616 const SmallVectorImpl<SDValue> &OutVals,
617 const SmallVectorImpl<ISD::InputArg> &Ins,
618 SDLoc dl, SelectionDAG &DAG,
619 SmallVectorImpl<SDValue> &InVals) const;
621 LowerCall_32SVR4(SDValue Chain, SDValue Callee, CallingConv::ID CallConv,
622 bool isVarArg, bool isTailCall,
623 const SmallVectorImpl<ISD::OutputArg> &Outs,
624 const SmallVectorImpl<SDValue> &OutVals,
625 const SmallVectorImpl<ISD::InputArg> &Ins,
626 SDLoc dl, SelectionDAG &DAG,
627 SmallVectorImpl<SDValue> &InVals) const;
629 SDValue lowerEH_SJLJ_SETJMP(SDValue Op, SelectionDAG &DAG) const;
630 SDValue lowerEH_SJLJ_LONGJMP(SDValue Op, SelectionDAG &DAG) const;
632 SDValue DAGCombineFastRecip(SDValue Op, DAGCombinerInfo &DCI) const;
633 SDValue DAGCombineFastRecipFSQRT(SDValue Op, DAGCombinerInfo &DCI) const;
635 CCAssignFn *useFastISelCCs(unsigned Flag) const;
639 FastISel *createFastISel(FunctionLoweringInfo &FuncInfo,
640 const TargetLibraryInfo *LibInfo);
643 bool CC_PPC32_SVR4_Custom_Dummy(unsigned &ValNo, MVT &ValVT, MVT &LocVT,
644 CCValAssign::LocInfo &LocInfo,
645 ISD::ArgFlagsTy &ArgFlags,
648 bool CC_PPC32_SVR4_Custom_AlignArgRegs(unsigned &ValNo, MVT &ValVT,
650 CCValAssign::LocInfo &LocInfo,
651 ISD::ArgFlagsTy &ArgFlags,
654 bool CC_PPC32_SVR4_Custom_AlignFPArgRegs(unsigned &ValNo, MVT &ValVT,
656 CCValAssign::LocInfo &LocInfo,
657 ISD::ArgFlagsTy &ArgFlags,
661 #endif // LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H