1 //===-- PPCISelLowering.h - PPC32 DAG Lowering Interface --------*- C++ -*-===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file defines the interfaces that PPC uses to lower LLVM code into a
13 //===----------------------------------------------------------------------===//
15 #ifndef LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
16 #define LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H
18 #include "llvm/Target/TargetLowering.h"
19 #include "llvm/CodeGen/SelectionDAG.h"
21 #include "PPCSubtarget.h"
26 // Start the numbering where the builtin ops and target ops leave off.
27 FIRST_NUMBER = ISD::BUILTIN_OP_END+PPC::INSTRUCTION_LIST_END,
29 /// FSEL - Traditional three-operand fsel node.
33 /// FCFID - The FCFID instruction, taking an f64 operand and producing
34 /// and f64 value containing the FP representation of the integer that
35 /// was temporarily in the f64 operand.
38 /// FCTI[D,W]Z - The FCTIDZ and FCTIWZ instructions, taking an f32 or f64
39 /// operand, producing an f64 value containing the integer representation
43 /// STFIWX - The STFIWX instruction. The first operand is an input token
44 /// chain, then an f64 value to store, then an address to store it to,
45 /// then a SRCVALUE for the address.
48 // VMADDFP, VNMSUBFP - The VMADDFP and VNMSUBFP instructions, taking
49 // three v4f32 operands and producing a v4f32 result.
52 /// VPERM - The PPC VPERM Instruction.
56 /// Hi/Lo - These represent the high and low 16-bit parts of a global
57 /// address respectively. These nodes have two operands, the first of
58 /// which must be a TargetGlobalAddress, and the second of which must be a
59 /// Constant. Selected naively, these turn into 'lis G+C' and 'li G+C',
60 /// though these are usually folded into other nodes.
63 /// OPRC, CHAIN = DYNALLOC(CHAIN, NEGSIZE, FRAME_INDEX)
64 /// This instruction is lowered in PPCRegisterInfo::eliminateFrameIndex to
65 /// compute an allocation on the stack.
68 /// GlobalBaseReg - On Darwin, this node represents the result of the mflr
69 /// at function entry, used for PIC code.
72 /// These nodes represent the 32-bit PPC shifts that operate on 6-bit
73 /// shift amounts. These nodes are generated by the multi-precision shift
77 /// EXTSW_32 - This is the EXTSW instruction for use with "32-bit"
81 /// STD_32 - This is the STD instruction for use with "32-bit" registers.
84 /// CALL - A direct function call.
87 /// CHAIN,FLAG = MTCTR(VAL, CHAIN[, INFLAG]) - Directly corresponds to a
88 /// MTCTR instruction.
91 /// CHAIN,FLAG = BCTRL(CHAIN, INFLAG) - Directly corresponds to a
92 /// BCTRL instruction.
93 BCTRL_Macho, BCTRL_ELF,
95 /// Return with a flag operand, matched by 'blr'
98 /// R32 = MFCR(CRREG, INFLAG) - Represents the MFCR/MFOCRF instructions.
99 /// This copies the bits corresponding to the specified CRREG into the
100 /// resultant GPR. Bits corresponding to other CR regs are undefined.
103 /// RESVEC = VCMP(LHS, RHS, OPC) - Represents one of the altivec VCMP*
104 /// instructions. For lack of better number, we use the opcode number
105 /// encoding for the OPC field to identify the compare. For example, 838
109 /// RESVEC, OUTFLAG = VCMPo(LHS, RHS, OPC) - Represents one of the
110 /// altivec VCMP*o instructions. For lack of better number, we use the
111 /// opcode number encoding for the OPC field to identify the compare. For
112 /// example, 838 is VCMPGTSH.
115 /// CHAIN = COND_BRANCH CHAIN, CRRC, OPC, DESTBB [, INFLAG] - This
116 /// corresponds to the COND_BRANCH pseudo instruction. CRRC is the
117 /// condition register to branch on, OPC is the branch opcode to use (e.g.
118 /// PPC::BLE), DESTBB is the destination block to branch to, and INFLAG is
119 /// an optional input flag argument.
122 /// CHAIN = STBRX CHAIN, GPRC, Ptr, SRCVALUE, Type - This is a
123 /// byte-swapping store instruction. It byte-swaps the low "Type" bits of
124 /// the GPRC input, then stores it through Ptr. Type can be either i16 or
128 /// GPRC, CHAIN = LBRX CHAIN, Ptr, SRCVALUE, Type - This is a
129 /// byte-swapping load instruction. It loads "Type" bits, byte swaps it,
130 /// then puts it in the bottom bits of the GPRC. TYPE can be either i16
134 // The following 5 instructions are used only as part of the
135 // long double-to-int conversion sequence.
137 /// OUTFLAG = MFFS F8RC - This moves the FPSCR (not modelled) into the
141 /// OUTFLAG = MTFSB0 INFLAG - This clears a bit in the FPSCR.
144 /// OUTFLAG = MTFSB1 INFLAG - This sets a bit in the FPSCR.
147 /// F8RC, OUTFLAG = FADDRTZ F8RC, F8RC, INFLAG - This is an FADD done with
148 /// rounding towards zero. It has flags added so it won't move past the
149 /// FPSCR-setting instructions.
152 /// MTFSF = F8RC, INFLAG - This moves the register into the FPSCR.
155 /// LARX = This corresponds to PPC l{w|d}arx instrcution: load and
156 /// reserve indexed. This is used to implement atomic operations.
159 /// STCX = This corresponds to PPC stcx. instrcution: store conditional
160 /// indexed. This is used to implement atomic operations.
163 /// CMP_UNRESERVE = Test for equality and "unreserve" if not true. This
164 /// is used to implement atomic operations.
167 /// TAILCALL - Indicates a tail call should be taken.
169 /// TC_RETURN - A tail call return.
171 /// operand #1 callee (register or absolute)
172 /// operand #2 stack adjustment
173 /// operand #3 optional in flag
178 /// Define some predicates that are used for node matching.
180 /// isVPKUHUMShuffleMask - Return true if this is the shuffle mask for a
181 /// VPKUHUM instruction.
182 bool isVPKUHUMShuffleMask(SDNode *N, bool isUnary);
184 /// isVPKUWUMShuffleMask - Return true if this is the shuffle mask for a
185 /// VPKUWUM instruction.
186 bool isVPKUWUMShuffleMask(SDNode *N, bool isUnary);
188 /// isVMRGLShuffleMask - Return true if this is a shuffle mask suitable for
189 /// a VRGL* instruction with the specified unit size (1,2 or 4 bytes).
190 bool isVMRGLShuffleMask(SDNode *N, unsigned UnitSize, bool isUnary);
192 /// isVMRGHShuffleMask - Return true if this is a shuffle mask suitable for
193 /// a VRGH* instruction with the specified unit size (1,2 or 4 bytes).
194 bool isVMRGHShuffleMask(SDNode *N, unsigned UnitSize, bool isUnary);
196 /// isVSLDOIShuffleMask - If this is a vsldoi shuffle mask, return the shift
197 /// amount, otherwise return -1.
198 int isVSLDOIShuffleMask(SDNode *N, bool isUnary);
200 /// isSplatShuffleMask - Return true if the specified VECTOR_SHUFFLE operand
201 /// specifies a splat of a single element that is suitable for input to
202 /// VSPLTB/VSPLTH/VSPLTW.
203 bool isSplatShuffleMask(SDNode *N, unsigned EltSize);
205 /// isAllNegativeZeroVector - Returns true if all elements of build_vector
207 bool isAllNegativeZeroVector(SDNode *N);
209 /// getVSPLTImmediate - Return the appropriate VSPLT* immediate to splat the
210 /// specified isSplatShuffleMask VECTOR_SHUFFLE mask.
211 unsigned getVSPLTImmediate(SDNode *N, unsigned EltSize);
213 /// get_VSPLTI_elt - If this is a build_vector of constants which can be
214 /// formed by using a vspltis[bhw] instruction of the specified element
215 /// size, return the constant being splatted. The ByteSize field indicates
216 /// the number of bytes of each element [124] -> [bhw].
217 SDOperand get_VSPLTI_elt(SDNode *N, unsigned ByteSize, SelectionDAG &DAG);
220 class PPCTargetLowering : public TargetLowering {
221 int VarArgsFrameIndex; // FrameIndex for start of varargs area.
222 int VarArgsStackOffset; // StackOffset for start of stack
224 unsigned VarArgsNumGPR; // Index of the first unused integer
225 // register for parameter passing.
226 unsigned VarArgsNumFPR; // Index of the first unused double
227 // register for parameter passing.
228 int ReturnAddrIndex; // FrameIndex for return slot.
229 const PPCSubtarget &PPCSubTarget;
231 explicit PPCTargetLowering(PPCTargetMachine &TM);
233 /// getTargetNodeName() - This method returns the name of a target specific
235 virtual const char *getTargetNodeName(unsigned Opcode) const;
237 /// getSetCCResultType - Return the ISD::SETCC ValueType
238 virtual MVT::ValueType getSetCCResultType(const SDOperand &) const;
240 /// getPreIndexedAddressParts - returns true by value, base pointer and
241 /// offset pointer and addressing mode by reference if the node's address
242 /// can be legally represented as pre-indexed load / store address.
243 virtual bool getPreIndexedAddressParts(SDNode *N, SDOperand &Base,
245 ISD::MemIndexedMode &AM,
248 /// SelectAddressRegReg - Given the specified addressed, check to see if it
249 /// can be represented as an indexed [r+r] operation. Returns false if it
250 /// can be more efficiently represented with [r+imm].
251 bool SelectAddressRegReg(SDOperand N, SDOperand &Base, SDOperand &Index,
254 /// SelectAddressRegImm - Returns true if the address N can be represented
255 /// by a base register plus a signed 16-bit displacement [r+imm], and if it
256 /// is not better represented as reg+reg.
257 bool SelectAddressRegImm(SDOperand N, SDOperand &Disp, SDOperand &Base,
260 /// SelectAddressRegRegOnly - Given the specified addressed, force it to be
261 /// represented as an indexed [r+r] operation.
262 bool SelectAddressRegRegOnly(SDOperand N, SDOperand &Base, SDOperand &Index,
265 /// SelectAddressRegImmShift - Returns true if the address N can be
266 /// represented by a base register plus a signed 14-bit displacement
267 /// [r+imm*4]. Suitable for use by STD and friends.
268 bool SelectAddressRegImmShift(SDOperand N, SDOperand &Disp, SDOperand &Base,
272 /// LowerOperation - Provide custom lowering hooks for some operations.
274 virtual SDOperand LowerOperation(SDOperand Op, SelectionDAG &DAG);
276 virtual SDNode *ExpandOperationResult(SDNode *N, SelectionDAG &DAG);
278 virtual SDOperand PerformDAGCombine(SDNode *N, DAGCombinerInfo &DCI) const;
280 virtual void computeMaskedBitsForTargetNode(const SDOperand Op,
284 const SelectionDAG &DAG,
285 unsigned Depth = 0) const;
287 virtual MachineBasicBlock *EmitInstrWithCustomInserter(MachineInstr *MI,
288 MachineBasicBlock *MBB);
290 ConstraintType getConstraintType(const std::string &Constraint) const;
291 std::pair<unsigned, const TargetRegisterClass*>
292 getRegForInlineAsmConstraint(const std::string &Constraint,
293 MVT::ValueType VT) const;
295 /// getByValTypeAlignment - Return the desired alignment for ByVal aggregate
296 /// function arguments in the caller parameter area. This is the actual
297 /// alignment, not its logarithm.
298 unsigned getByValTypeAlignment(const Type *Ty) const;
300 /// LowerAsmOperandForConstraint - Lower the specified operand into the Ops
301 /// vector. If it is invalid, don't add anything to Ops.
302 virtual void LowerAsmOperandForConstraint(SDOperand Op,
303 char ConstraintLetter,
304 std::vector<SDOperand> &Ops,
305 SelectionDAG &DAG) const;
307 /// isLegalAddressingMode - Return true if the addressing mode represented
308 /// by AM is legal for this target, for a load/store of the specified type.
309 virtual bool isLegalAddressingMode(const AddrMode &AM, const Type *Ty)const;
311 /// isLegalAddressImmediate - Return true if the integer value can be used
312 /// as the offset of the target addressing mode for load / store of the
314 virtual bool isLegalAddressImmediate(int64_t V, const Type *Ty) const;
316 /// isLegalAddressImmediate - Return true if the GlobalValue can be used as
317 /// the offset of the target addressing mode.
318 virtual bool isLegalAddressImmediate(GlobalValue *GV) const;
320 /// IsEligibleForTailCallOptimization - Check whether the call is eligible
321 /// for tail call optimization. Target which want to do tail call
322 /// optimization should implement this function.
323 virtual bool IsEligibleForTailCallOptimization(SDOperand Call,
325 SelectionDAG &DAG) const;
328 /// PPCAtomicLabelIndex - Keep track the number of PPC atomic labels.
330 unsigned PPCAtomicLabelIndex;
332 SDOperand getFramePointerFrameIndex(SelectionDAG & DAG) const;
333 SDOperand getReturnAddrFrameIndex(SelectionDAG & DAG) const;
335 SDOperand EmitTailCallLoadFPAndRetAddr(SelectionDAG & DAG,
341 SDOperand LowerRETURNADDR(SDOperand Op, SelectionDAG &DAG);
342 SDOperand LowerFRAMEADDR(SDOperand Op, SelectionDAG &DAG);
343 SDOperand LowerConstantPool(SDOperand Op, SelectionDAG &DAG);
344 SDOperand LowerGlobalAddress(SDOperand Op, SelectionDAG &DAG);
345 SDOperand LowerGlobalTLSAddress(SDOperand Op, SelectionDAG &DAG);
346 SDOperand LowerJumpTable(SDOperand Op, SelectionDAG &DAG);
347 SDOperand LowerSETCC(SDOperand Op, SelectionDAG &DAG);
348 SDOperand LowerVASTART(SDOperand Op, SelectionDAG &DAG,
349 int VarArgsFrameIndex, int VarArgsStackOffset,
350 unsigned VarArgsNumGPR, unsigned VarArgsNumFPR,
351 const PPCSubtarget &Subtarget);
352 SDOperand LowerVAARG(SDOperand Op, SelectionDAG &DAG, int VarArgsFrameIndex,
353 int VarArgsStackOffset, unsigned VarArgsNumGPR,
354 unsigned VarArgsNumFPR, const PPCSubtarget &Subtarget);
355 SDOperand LowerFORMAL_ARGUMENTS(SDOperand Op, SelectionDAG &DAG,
356 int &VarArgsFrameIndex,
357 int &VarArgsStackOffset,
358 unsigned &VarArgsNumGPR,
359 unsigned &VarArgsNumFPR,
360 const PPCSubtarget &Subtarget);
361 SDOperand LowerCALL(SDOperand Op, SelectionDAG &DAG,
362 const PPCSubtarget &Subtarget, TargetMachine &TM);
363 SDOperand LowerRET(SDOperand Op, SelectionDAG &DAG, TargetMachine &TM);
364 SDOperand LowerSTACKRESTORE(SDOperand Op, SelectionDAG &DAG,
365 const PPCSubtarget &Subtarget);
366 SDOperand LowerDYNAMIC_STACKALLOC(SDOperand Op, SelectionDAG &DAG,
367 const PPCSubtarget &Subtarget);
368 SDOperand LowerSELECT_CC(SDOperand Op, SelectionDAG &DAG);
369 SDOperand LowerAtomicLAS(SDOperand Op, SelectionDAG &DAG);
370 SDOperand LowerAtomicLCS(SDOperand Op, SelectionDAG &DAG);
371 SDOperand LowerAtomicSWAP(SDOperand Op, SelectionDAG &DAG);
372 SDOperand LowerFP_TO_SINT(SDOperand Op, SelectionDAG &DAG);
373 SDOperand LowerSINT_TO_FP(SDOperand Op, SelectionDAG &DAG);
374 SDOperand LowerFP_ROUND_INREG(SDOperand Op, SelectionDAG &DAG);
375 SDOperand LowerFLT_ROUNDS_(SDOperand Op, SelectionDAG &DAG);
376 SDOperand LowerSHL_PARTS(SDOperand Op, SelectionDAG &DAG);
377 SDOperand LowerSRL_PARTS(SDOperand Op, SelectionDAG &DAG);
378 SDOperand LowerSRA_PARTS(SDOperand Op, SelectionDAG &DAG);
379 SDOperand LowerBUILD_VECTOR(SDOperand Op, SelectionDAG &DAG);
380 SDOperand LowerVECTOR_SHUFFLE(SDOperand Op, SelectionDAG &DAG);
381 SDOperand LowerINTRINSIC_WO_CHAIN(SDOperand Op, SelectionDAG &DAG);
382 SDOperand LowerSCALAR_TO_VECTOR(SDOperand Op, SelectionDAG &DAG);
383 SDOperand LowerMUL(SDOperand Op, SelectionDAG &DAG);
387 #endif // LLVM_TARGET_POWERPC_PPC32ISELLOWERING_H