1 //===-- InstSelectSimple.cpp - A simple instruction selector for SparcV8 --===//
3 // The LLVM Compiler Infrastructure
5 // This file was developed by the LLVM research group and is distributed under
6 // the University of Illinois Open Source License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file defines a simple peephole instruction selector for the V8 target
12 //===----------------------------------------------------------------------===//
15 #include "SparcV8InstrInfo.h"
16 #include "Support/Debug.h"
17 #include "llvm/Instructions.h"
18 #include "llvm/Pass.h"
19 #include "llvm/Constants.h"
20 #include "llvm/CodeGen/IntrinsicLowering.h"
21 #include "llvm/CodeGen/MachineInstrBuilder.h"
22 #include "llvm/CodeGen/MachineFrameInfo.h"
23 #include "llvm/CodeGen/MachineConstantPool.h"
24 #include "llvm/CodeGen/MachineFunction.h"
25 #include "llvm/CodeGen/SSARegMap.h"
26 #include "llvm/Target/TargetMachine.h"
27 #include "llvm/Support/GetElementPtrTypeIterator.h"
28 #include "llvm/Support/InstVisitor.h"
29 #include "llvm/Support/CFG.h"
33 struct V8ISel : public FunctionPass, public InstVisitor<V8ISel> {
35 MachineFunction *F; // The function we are compiling into
36 MachineBasicBlock *BB; // The current MBB we are compiling
38 std::map<Value*, unsigned> RegMap; // Mapping between Val's and SSA Regs
40 // MBBMap - Mapping between LLVM BB -> Machine BB
41 std::map<const BasicBlock*, MachineBasicBlock*> MBBMap;
43 V8ISel(TargetMachine &tm) : TM(tm), F(0), BB(0) {}
45 /// runOnFunction - Top level implementation of instruction selection for
46 /// the entire function.
48 bool runOnFunction(Function &Fn);
50 virtual const char *getPassName() const {
51 return "SparcV8 Simple Instruction Selection";
54 /// emitGEPOperation - Common code shared between visitGetElementPtrInst and
55 /// constant expression GEP support.
57 void emitGEPOperation(MachineBasicBlock *BB, MachineBasicBlock::iterator IP,
58 Value *Src, User::op_iterator IdxBegin,
59 User::op_iterator IdxEnd, unsigned TargetReg);
61 /// emitCastOperation - Common code shared between visitCastInst and
62 /// constant expression cast support.
64 void emitCastOperation(MachineBasicBlock *BB,MachineBasicBlock::iterator IP,
65 Value *Src, const Type *DestTy, unsigned TargetReg);
67 /// visitBasicBlock - This method is called when we are visiting a new basic
68 /// block. This simply creates a new MachineBasicBlock to emit code into
69 /// and adds it to the current MachineFunction. Subsequent visit* for
70 /// instructions will be invoked for all instructions in the basic block.
72 void visitBasicBlock(BasicBlock &LLVM_BB) {
73 BB = MBBMap[&LLVM_BB];
76 void visitBinaryOperator(Instruction &I);
77 void visitShiftInst (ShiftInst &SI) { visitBinaryOperator (SI); }
78 void visitSetCondInst(Instruction &I);
79 void visitCallInst(CallInst &I);
80 void visitReturnInst(ReturnInst &I);
81 void visitBranchInst(BranchInst &I);
82 void visitCastInst(CastInst &I);
83 void visitLoadInst(LoadInst &I);
84 void visitStoreInst(StoreInst &I);
85 void visitPHINode(PHINode &I) {} // PHI nodes handled by second pass
86 void visitGetElementPtrInst(GetElementPtrInst &I);
87 void visitAllocaInst(AllocaInst &I);
91 void visitInstruction(Instruction &I) {
92 std::cerr << "Unhandled instruction: " << I;
96 /// LowerUnknownIntrinsicFunctionCalls - This performs a prepass over the
97 /// function, lowering any calls to unknown intrinsic functions into the
98 /// equivalent LLVM code.
99 void LowerUnknownIntrinsicFunctionCalls(Function &F);
100 void visitIntrinsicCall(Intrinsic::ID ID, CallInst &CI);
102 void LoadArgumentsToVirtualRegs(Function *F);
104 /// SelectPHINodes - Insert machine code to generate phis. This is tricky
105 /// because we have to generate our sources into the source basic blocks,
106 /// not the current one.
108 void SelectPHINodes();
110 /// copyConstantToRegister - Output the instructions required to put the
111 /// specified constant into the specified register.
113 void copyConstantToRegister(MachineBasicBlock *MBB,
114 MachineBasicBlock::iterator IP,
115 Constant *C, unsigned R);
117 /// makeAnotherReg - This method returns the next register number we haven't
120 /// Long values are handled somewhat specially. They are always allocated
121 /// as pairs of 32 bit integer values. The register number returned is the
122 /// lower 32 bits of the long value, and the regNum+1 is the upper 32 bits
123 /// of the long value.
125 unsigned makeAnotherReg(const Type *Ty) {
126 assert(dynamic_cast<const SparcV8RegisterInfo*>(TM.getRegisterInfo()) &&
127 "Current target doesn't have SparcV8 reg info??");
128 const SparcV8RegisterInfo *MRI =
129 static_cast<const SparcV8RegisterInfo*>(TM.getRegisterInfo());
130 if (Ty == Type::LongTy || Ty == Type::ULongTy) {
131 const TargetRegisterClass *RC = MRI->getRegClassForType(Type::IntTy);
132 // Create the lower part
133 F->getSSARegMap()->createVirtualRegister(RC);
134 // Create the upper part.
135 return F->getSSARegMap()->createVirtualRegister(RC)-1;
138 // Add the mapping of regnumber => reg class to MachineFunction
139 const TargetRegisterClass *RC = MRI->getRegClassForType(Ty);
140 return F->getSSARegMap()->createVirtualRegister(RC);
143 unsigned getReg(Value &V) { return getReg (&V); } // allow refs.
144 unsigned getReg(Value *V) {
145 // Just append to the end of the current bb.
146 MachineBasicBlock::iterator It = BB->end();
147 return getReg(V, BB, It);
149 unsigned getReg(Value *V, MachineBasicBlock *MBB,
150 MachineBasicBlock::iterator IPt) {
151 unsigned &Reg = RegMap[V];
153 Reg = makeAnotherReg(V->getType());
156 // If this operand is a constant, emit the code to copy the constant into
157 // the register here...
159 if (Constant *C = dyn_cast<Constant>(V)) {
160 copyConstantToRegister(MBB, IPt, C, Reg);
161 RegMap.erase(V); // Assign a new name to this constant if ref'd again
162 } else if (GlobalValue *GV = dyn_cast<GlobalValue>(V)) {
163 // Move the address of the global into the register
164 unsigned TmpReg = makeAnotherReg(V->getType());
165 BuildMI (*MBB, IPt, V8::SETHIi, 1, TmpReg).addGlobalAddress (GV);
166 BuildMI (*MBB, IPt, V8::ORri, 2, Reg).addReg (TmpReg)
167 .addGlobalAddress (GV);
168 RegMap.erase(V); // Assign a new name to this address if ref'd again
177 FunctionPass *llvm::createSparcV8SimpleInstructionSelector(TargetMachine &TM) {
178 return new V8ISel(TM);
182 cByte, cShort, cInt, cLong, cFloat, cDouble
185 static TypeClass getClass (const Type *T) {
186 switch (T->getTypeID()) {
187 case Type::UByteTyID: case Type::SByteTyID: return cByte;
188 case Type::UShortTyID: case Type::ShortTyID: return cShort;
189 case Type::PointerTyID:
190 case Type::UIntTyID: case Type::IntTyID: return cInt;
191 case Type::ULongTyID: case Type::LongTyID: return cLong;
192 case Type::FloatTyID: return cFloat;
193 case Type::DoubleTyID: return cDouble;
195 assert (0 && "Type of unknown class passed to getClass?");
199 static TypeClass getClassB(const Type *T) {
200 if (T == Type::BoolTy) return cByte;
206 /// copyConstantToRegister - Output the instructions required to put the
207 /// specified constant into the specified register.
209 void V8ISel::copyConstantToRegister(MachineBasicBlock *MBB,
210 MachineBasicBlock::iterator IP,
211 Constant *C, unsigned R) {
212 if (ConstantExpr *CE = dyn_cast<ConstantExpr>(C)) {
213 switch (CE->getOpcode()) {
214 case Instruction::GetElementPtr:
215 emitGEPOperation(MBB, IP, CE->getOperand(0),
216 CE->op_begin()+1, CE->op_end(), R);
218 case Instruction::Cast:
219 emitCastOperation(MBB, IP, CE->getOperand(0), CE->getType(), R);
222 std::cerr << "Copying this constant expr not yet handled: " << *CE;
227 if (C->getType()->isIntegral ()) {
229 unsigned Class = getClassB (C->getType ());
230 if (Class == cLong) {
231 unsigned TmpReg = makeAnotherReg (Type::IntTy);
232 unsigned TmpReg2 = makeAnotherReg (Type::IntTy);
233 // Copy the value into the register pair.
234 // R = top(more-significant) half, R+1 = bottom(less-significant) half
235 uint64_t Val = cast<ConstantInt>(C)->getRawValue();
236 unsigned topHalf = Val & 0xffffffffU;
237 unsigned bottomHalf = Val >> 32;
238 unsigned HH = topHalf >> 10;
239 unsigned HM = topHalf & 0x03ff;
240 unsigned LM = bottomHalf >> 10;
241 unsigned LO = bottomHalf & 0x03ff;
242 BuildMI (*MBB, IP, V8::SETHIi, 1, TmpReg).addZImm(HH);
243 BuildMI (*MBB, IP, V8::ORri, 2, R).addReg (TmpReg)
245 BuildMI (*MBB, IP, V8::SETHIi, 1, TmpReg2).addZImm(LM);
246 BuildMI (*MBB, IP, V8::ORri, 2, R+1).addReg (TmpReg2)
251 assert(Class <= cInt && "Type not handled yet!");
253 if (C->getType() == Type::BoolTy) {
254 Val = (C == ConstantBool::True);
256 ConstantInt *CI = dyn_cast<ConstantInt> (C);
257 Val = CI->getRawValue ();
261 BuildMI (*MBB, IP, V8::ORri, 2, R).addReg (V8::G0).addSImm((uint8_t)Val);
264 unsigned TmpReg = makeAnotherReg (C->getType ());
265 BuildMI (*MBB, IP, V8::SETHIi, 1, TmpReg)
266 .addSImm (((uint16_t) Val) >> 10);
267 BuildMI (*MBB, IP, V8::ORri, 2, R).addReg (TmpReg)
268 .addSImm (((uint16_t) Val) & 0x03ff);
272 unsigned TmpReg = makeAnotherReg (C->getType ());
273 BuildMI (*MBB, IP, V8::SETHIi, 1, TmpReg).addZImm(((uint32_t)Val) >> 10);
274 BuildMI (*MBB, IP, V8::ORri, 2, R).addReg (TmpReg)
275 .addSImm (((uint32_t) Val) & 0x03ff);
279 std::cerr << "Offending constant: " << *C << "\n";
280 assert (0 && "Can't copy this kind of constant into register yet");
283 } else if (ConstantFP *CFP = dyn_cast<ConstantFP>(C)) {
284 // We need to spill the constant to memory...
285 MachineConstantPool *CP = F->getConstantPool();
286 unsigned CPI = CP->getConstantPoolIndex(CFP);
287 const Type *Ty = CFP->getType();
289 assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
290 unsigned LoadOpcode = Ty == Type::FloatTy ? V8::LDFri : V8::LDDFri;
291 BuildMI (*MBB, IP, LoadOpcode, 2, R).addConstantPoolIndex (CPI).addSImm (0);
292 } else if (isa<ConstantPointerNull>(C)) {
293 // Copy zero (null pointer) to the register.
294 BuildMI (*MBB, IP, V8::ORri, 2, R).addReg (V8::G0).addSImm (0);
295 } else if (ConstantPointerRef *CPR = dyn_cast<ConstantPointerRef>(C)) {
296 // Copy it with a SETHI/OR pair; the JIT + asmwriter should recognize
297 // that SETHI %reg,global == SETHI %reg,%hi(global) and
298 // OR %reg,global,%reg == OR %reg,%lo(global),%reg.
299 unsigned TmpReg = makeAnotherReg (C->getType ());
300 BuildMI (*MBB, IP, V8::SETHIi, 1, TmpReg).addGlobalAddress (CPR->getValue());
301 BuildMI (*MBB, IP, V8::ORri, 2, R).addReg (TmpReg)
302 .addGlobalAddress (CPR->getValue ());
304 std::cerr << "Offending constant: " << *C << "\n";
305 assert (0 && "Can't copy this kind of constant into register yet");
309 void V8ISel::LoadArgumentsToVirtualRegs (Function *F) {
310 unsigned ArgOffset = 0;
311 static const unsigned IncomingArgRegs[] = { V8::I0, V8::I1, V8::I2,
312 V8::I3, V8::I4, V8::I5 };
313 assert (F->asize () < 7
314 && "Can't handle loading excess call args off the stack yet");
316 for (Function::aiterator I = F->abegin(), E = F->aend(); I != E; ++I) {
317 unsigned Reg = getReg(*I);
318 switch (getClassB(I->getType())) {
322 BuildMI(BB, V8::ORrr, 2, Reg).addReg (V8::G0)
323 .addReg (IncomingArgRegs[ArgOffset]);
326 assert (0 && "Only <=32-bit, integral arguments currently handled");
333 void V8ISel::SelectPHINodes() {
334 const TargetInstrInfo &TII = *TM.getInstrInfo();
335 const Function &LF = *F->getFunction(); // The LLVM function...
336 for (Function::const_iterator I = LF.begin(), E = LF.end(); I != E; ++I) {
337 const BasicBlock *BB = I;
338 MachineBasicBlock &MBB = *MBBMap[I];
340 // Loop over all of the PHI nodes in the LLVM basic block...
341 MachineBasicBlock::iterator PHIInsertPoint = MBB.begin();
342 for (BasicBlock::const_iterator I = BB->begin();
343 PHINode *PN = const_cast<PHINode*>(dyn_cast<PHINode>(I)); ++I) {
345 // Create a new machine instr PHI node, and insert it.
346 unsigned PHIReg = getReg(*PN);
347 MachineInstr *PhiMI = BuildMI(MBB, PHIInsertPoint,
348 V8::PHI, PN->getNumOperands(), PHIReg);
350 MachineInstr *LongPhiMI = 0;
351 if (PN->getType() == Type::LongTy || PN->getType() == Type::ULongTy)
352 LongPhiMI = BuildMI(MBB, PHIInsertPoint,
353 V8::PHI, PN->getNumOperands(), PHIReg+1);
355 // PHIValues - Map of blocks to incoming virtual registers. We use this
356 // so that we only initialize one incoming value for a particular block,
357 // even if the block has multiple entries in the PHI node.
359 std::map<MachineBasicBlock*, unsigned> PHIValues;
361 for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
362 MachineBasicBlock *PredMBB = 0;
363 for (MachineBasicBlock::pred_iterator PI = MBB.pred_begin (),
364 PE = MBB.pred_end (); PI != PE; ++PI)
365 if (PN->getIncomingBlock(i) == (*PI)->getBasicBlock()) {
369 assert (PredMBB && "Couldn't find incoming machine-cfg edge for phi");
372 std::map<MachineBasicBlock*, unsigned>::iterator EntryIt =
373 PHIValues.lower_bound(PredMBB);
375 if (EntryIt != PHIValues.end() && EntryIt->first == PredMBB) {
376 // We already inserted an initialization of the register for this
377 // predecessor. Recycle it.
378 ValReg = EntryIt->second;
381 // Get the incoming value into a virtual register.
383 Value *Val = PN->getIncomingValue(i);
385 // If this is a constant or GlobalValue, we may have to insert code
386 // into the basic block to compute it into a virtual register.
387 if ((isa<Constant>(Val) && !isa<ConstantExpr>(Val)) ||
388 isa<GlobalValue>(Val)) {
389 // Simple constants get emitted at the end of the basic block,
390 // before any terminator instructions. We "know" that the code to
391 // move a constant into a register will never clobber any flags.
392 ValReg = getReg(Val, PredMBB, PredMBB->getFirstTerminator());
394 // Because we don't want to clobber any values which might be in
395 // physical registers with the computation of this constant (which
396 // might be arbitrarily complex if it is a constant expression),
397 // just insert the computation at the top of the basic block.
398 MachineBasicBlock::iterator PI = PredMBB->begin();
400 // Skip over any PHI nodes though!
401 while (PI != PredMBB->end() && PI->getOpcode() == V8::PHI)
404 ValReg = getReg(Val, PredMBB, PI);
407 // Remember that we inserted a value for this PHI for this predecessor
408 PHIValues.insert(EntryIt, std::make_pair(PredMBB, ValReg));
411 PhiMI->addRegOperand(ValReg);
412 PhiMI->addMachineBasicBlockOperand(PredMBB);
414 LongPhiMI->addRegOperand(ValReg+1);
415 LongPhiMI->addMachineBasicBlockOperand(PredMBB);
419 // Now that we emitted all of the incoming values for the PHI node, make
420 // sure to reposition the InsertPoint after the PHI that we just added.
421 // This is needed because we might have inserted a constant into this
422 // block, right after the PHI's which is before the old insert point!
423 PHIInsertPoint = LongPhiMI ? LongPhiMI : PhiMI;
429 bool V8ISel::runOnFunction(Function &Fn) {
430 // First pass over the function, lower any unknown intrinsic functions
431 // with the IntrinsicLowering class.
432 LowerUnknownIntrinsicFunctionCalls(Fn);
434 F = &MachineFunction::construct(&Fn, TM);
436 // Create all of the machine basic blocks for the function...
437 for (Function::iterator I = Fn.begin(), E = Fn.end(); I != E; ++I)
438 F->getBasicBlockList().push_back(MBBMap[I] = new MachineBasicBlock(I));
442 // Set up a frame object for the return address. This is used by the
443 // llvm.returnaddress & llvm.frameaddress intrinisics.
444 //ReturnAddressIndex = F->getFrameInfo()->CreateFixedObject(4, -4);
446 // Copy incoming arguments off of the stack and out of fixed registers.
447 LoadArgumentsToVirtualRegs(&Fn);
449 // Instruction select everything except PHI nodes
452 // Select the PHI nodes
458 // We always build a machine code representation for the function
462 void V8ISel::visitCastInst(CastInst &I) {
463 Value *Op = I.getOperand(0);
464 unsigned DestReg = getReg(I);
465 MachineBasicBlock::iterator MI = BB->end();
466 emitCastOperation(BB, MI, Op, I.getType(), DestReg);
469 /// emitCastOperation - Common code shared between visitCastInst and constant
470 /// expression cast support.
472 void V8ISel::emitCastOperation(MachineBasicBlock *BB,
473 MachineBasicBlock::iterator IP,
474 Value *Src, const Type *DestTy,
476 const Type *SrcTy = Src->getType();
477 unsigned SrcClass = getClassB(SrcTy);
478 unsigned DestClass = getClassB(DestTy);
479 unsigned SrcReg = getReg(Src, BB, IP);
481 const Type *oldTy = SrcTy;
482 const Type *newTy = DestTy;
483 unsigned oldTyClass = SrcClass;
484 unsigned newTyClass = DestClass;
486 if (oldTyClass < cLong && newTyClass < cLong) {
487 if (oldTyClass >= newTyClass) {
488 // Emit a reg->reg copy to do a equal-size or narrowing cast,
489 // and do sign/zero extension (necessary if we change signedness).
490 unsigned TmpReg1 = makeAnotherReg (newTy);
491 unsigned TmpReg2 = makeAnotherReg (newTy);
492 BuildMI (*BB, IP, V8::ORrr, 2, TmpReg1).addReg (V8::G0).addReg (SrcReg);
493 unsigned shiftWidth = 32 - (8 * TM.getTargetData ().getTypeSize (newTy));
494 BuildMI (*BB, IP, V8::SLLri, 2, TmpReg2).addZImm (shiftWidth).addReg(TmpReg1);
495 if (newTy->isSigned ()) { // sign-extend with SRA
496 BuildMI(*BB, IP, V8::SRAri, 2, DestReg).addZImm (shiftWidth).addReg(TmpReg2);
497 } else { // zero-extend with SRL
498 BuildMI(*BB, IP, V8::SRLri, 2, DestReg).addZImm (shiftWidth).addReg(TmpReg2);
501 unsigned TmpReg1 = makeAnotherReg (oldTy);
502 unsigned TmpReg2 = makeAnotherReg (newTy);
503 unsigned TmpReg3 = makeAnotherReg (newTy);
504 // Widening integer cast. Make sure it's fully sign/zero-extended
505 // wrt the input type, then make sure it's fully sign/zero-extended wrt
506 // the output type. Kind of stupid, but simple...
507 unsigned shiftWidth = 32 - (8 * TM.getTargetData ().getTypeSize (oldTy));
508 BuildMI (*BB, IP, V8::SLLri, 2, TmpReg1).addZImm (shiftWidth).addReg(SrcReg);
509 if (oldTy->isSigned ()) { // sign-extend with SRA
510 BuildMI(*BB, IP, V8::SRAri, 2, TmpReg2).addZImm (shiftWidth).addReg(TmpReg1);
511 } else { // zero-extend with SRL
512 BuildMI(*BB, IP, V8::SRLri, 2, TmpReg2).addZImm (shiftWidth).addReg(TmpReg1);
514 shiftWidth = 32 - (8 * TM.getTargetData ().getTypeSize (newTy));
515 BuildMI (*BB, IP, V8::SLLri, 2, TmpReg3).addZImm (shiftWidth).addReg(TmpReg2);
516 if (newTy->isSigned ()) { // sign-extend with SRA
517 BuildMI(*BB, IP, V8::SRAri, 2, DestReg).addZImm (shiftWidth).addReg(TmpReg3);
518 } else { // zero-extend with SRL
519 BuildMI(*BB, IP, V8::SRLri, 2, DestReg).addZImm (shiftWidth).addReg(TmpReg3);
523 if (oldTyClass < cLong && newTyClass == cFloat) {
524 // cast int to float. Store it to a stack slot and then load
525 // it using ldf into a floating point register. then do fitos.
526 std::cerr << "Casts to float still unsupported: SrcTy = "
527 << *SrcTy << ", DestTy = " << *DestTy << "\n";
529 } else if (oldTyClass < cLong && newTyClass == cDouble) {
530 std::cerr << "Casts to double still unsupported: SrcTy = "
531 << *SrcTy << ", DestTy = " << *DestTy << "\n";
534 std::cerr << "Cast still unsupported: SrcTy = "
535 << *SrcTy << ", DestTy = " << *DestTy << "\n";
541 void V8ISel::visitLoadInst(LoadInst &I) {
542 unsigned DestReg = getReg (I);
543 unsigned PtrReg = getReg (I.getOperand (0));
544 switch (getClassB (I.getType ())) {
546 if (I.getType ()->isSigned ())
547 BuildMI (BB, V8::LDSB, 2, DestReg).addReg (PtrReg).addSImm(0);
549 BuildMI (BB, V8::LDUB, 2, DestReg).addReg (PtrReg).addSImm(0);
552 if (I.getType ()->isSigned ())
553 BuildMI (BB, V8::LDSH, 2, DestReg).addReg (PtrReg).addSImm(0);
555 BuildMI (BB, V8::LDUH, 2, DestReg).addReg (PtrReg).addSImm(0);
558 BuildMI (BB, V8::LD, 2, DestReg).addReg (PtrReg).addSImm(0);
561 BuildMI (BB, V8::LD, 2, DestReg).addReg (PtrReg).addSImm(0);
562 BuildMI (BB, V8::LD, 2, DestReg+1).addReg (PtrReg).addSImm(4);
565 BuildMI (BB, V8::LDFri, 2, DestReg).addReg (PtrReg).addSImm(0);
568 BuildMI (BB, V8::LDDFri, 2, DestReg).addReg (PtrReg).addSImm(0);
571 std::cerr << "Load instruction not handled: " << I;
577 void V8ISel::visitStoreInst(StoreInst &I) {
578 Value *SrcVal = I.getOperand (0);
579 unsigned SrcReg = getReg (SrcVal);
580 unsigned PtrReg = getReg (I.getOperand (1));
581 switch (getClassB (SrcVal->getType ())) {
583 BuildMI (BB, V8::STB, 3).addReg (PtrReg).addSImm (0).addReg (SrcReg);
586 BuildMI (BB, V8::STH, 3).addReg (PtrReg).addSImm (0).addReg (SrcReg);
589 BuildMI (BB, V8::ST, 3).addReg (PtrReg).addSImm (0).addReg (SrcReg);
592 BuildMI (BB, V8::ST, 3).addReg (PtrReg).addSImm (0).addReg (SrcReg);
593 BuildMI (BB, V8::ST, 3).addReg (PtrReg).addSImm (4).addReg (SrcReg+1);
596 BuildMI (BB, V8::STFri, 3).addReg (PtrReg).addSImm (0).addReg (SrcReg);
599 BuildMI (BB, V8::STDFri, 3).addReg (PtrReg).addSImm (0).addReg (SrcReg);
602 std::cerr << "Store instruction not handled: " << I;
608 void V8ISel::visitCallInst(CallInst &I) {
609 MachineInstr *TheCall;
610 // Is it an intrinsic function call?
611 if (Function *F = I.getCalledFunction()) {
612 if (Intrinsic::ID ID = (Intrinsic::ID)F->getIntrinsicID()) {
613 visitIntrinsicCall(ID, I); // Special intrinsics are not handled here
619 assert (I.getNumOperands () < 8
620 && "Can't handle pushing excess call args on the stack yet");
621 static const unsigned OutgoingArgRegs[] = { V8::O0, V8::O1, V8::O2, V8::O3,
623 for (unsigned i = 1; i < 7; ++i)
624 if (i < I.getNumOperands ()) {
625 unsigned ArgReg = getReg (I.getOperand (i));
626 // Schlep it over into the incoming arg register
627 BuildMI (BB, V8::ORrr, 2, OutgoingArgRegs[i - 1]).addReg (V8::G0)
631 // Emit call instruction
632 if (Function *F = I.getCalledFunction ()) {
633 BuildMI (BB, V8::CALL, 1).addGlobalAddress (F, true);
634 } else { // Emit an indirect call...
635 unsigned Reg = getReg (I.getCalledValue ());
636 BuildMI (BB, V8::JMPLrr, 3, V8::O7).addReg (Reg).addReg (V8::G0);
639 // Deal w/ return value: schlep it over into the destination register
640 if (I.getType () == Type::VoidTy)
642 unsigned DestReg = getReg (I);
643 switch (getClass (I.getType ())) {
647 BuildMI (BB, V8::ORrr, 2, DestReg).addReg(V8::G0).addReg(V8::O0);
650 BuildMI (BB, V8::FMOVS, 2, DestReg).addReg(V8::F0);
653 std::cerr << "Return type of call instruction not handled: " << I;
658 void V8ISel::visitReturnInst(ReturnInst &I) {
659 if (I.getNumOperands () == 1) {
660 unsigned RetValReg = getReg (I.getOperand (0));
661 switch (getClass (I.getOperand (0)->getType ())) {
665 // Schlep it over into i0 (where it will become o0 after restore).
666 BuildMI (BB, V8::ORrr, 2, V8::I0).addReg(V8::G0).addReg(RetValReg);
669 std::cerr << "Return instruction of this type not handled: " << I;
674 // Just emit a 'retl' instruction to return.
675 BuildMI(BB, V8::RETL, 0);
679 static inline BasicBlock *getBlockAfter(BasicBlock *BB) {
680 Function::iterator I = BB; ++I; // Get iterator to next block
681 return I != BB->getParent()->end() ? &*I : 0;
684 /// visitBranchInst - Handles conditional and unconditional branches.
686 void V8ISel::visitBranchInst(BranchInst &I) {
687 BasicBlock *takenSucc = I.getSuccessor (0);
688 MachineBasicBlock *takenSuccMBB = MBBMap[takenSucc];
689 BB->addSuccessor (takenSuccMBB);
690 if (I.isConditional()) { // conditional branch
691 BasicBlock *notTakenSucc = I.getSuccessor (1);
692 MachineBasicBlock *notTakenSuccMBB = MBBMap[notTakenSucc];
693 BB->addSuccessor (notTakenSuccMBB);
695 // CondReg=(<condition>);
696 // If (CondReg==0) goto notTakenSuccMBB;
697 unsigned CondReg = getReg (I.getCondition ());
698 BuildMI (BB, V8::CMPri, 2).addSImm (0).addReg (CondReg);
699 BuildMI (BB, V8::BE, 1).addMBB (notTakenSuccMBB);
701 // goto takenSuccMBB;
702 BuildMI (BB, V8::BA, 1).addMBB (takenSuccMBB);
705 /// emitGEPOperation - Common code shared between visitGetElementPtrInst and
706 /// constant expression GEP support.
708 void V8ISel::emitGEPOperation (MachineBasicBlock *MBB,
709 MachineBasicBlock::iterator IP,
710 Value *Src, User::op_iterator IdxBegin,
711 User::op_iterator IdxEnd, unsigned TargetReg) {
712 const TargetData &TD = TM.getTargetData ();
713 const Type *Ty = Src->getType ();
714 unsigned basePtrReg = getReg (Src, MBB, IP);
716 // GEPs have zero or more indices; we must perform a struct access
717 // or array access for each one.
718 for (GetElementPtrInst::op_iterator oi = IdxBegin, oe = IdxEnd; oi != oe;
721 unsigned nextBasePtrReg = makeAnotherReg (Type::UIntTy);
722 if (const StructType *StTy = dyn_cast<StructType> (Ty)) {
723 // It's a struct access. idx is the index into the structure,
724 // which names the field. Use the TargetData structure to
725 // pick out what the layout of the structure is in memory.
726 // Use the (constant) structure index's value to find the
727 // right byte offset from the StructLayout class's list of
728 // structure member offsets.
729 unsigned fieldIndex = cast<ConstantUInt> (idx)->getValue ();
730 unsigned memberOffset =
731 TD.getStructLayout (StTy)->MemberOffsets[fieldIndex];
732 // Emit an ADD to add memberOffset to the basePtr.
733 BuildMI (*MBB, IP, V8::ADDri, 2,
734 nextBasePtrReg).addReg (basePtrReg).addZImm (memberOffset);
735 // The next type is the member of the structure selected by the
737 Ty = StTy->getElementType (fieldIndex);
738 } else if (const SequentialType *SqTy = dyn_cast<SequentialType> (Ty)) {
739 // It's an array or pointer access: [ArraySize x ElementType].
740 // We want to add basePtrReg to (idxReg * sizeof ElementType). First, we
741 // must find the size of the pointed-to type (Not coincidentally, the next
742 // type is the type of the elements in the array).
743 Ty = SqTy->getElementType ();
744 unsigned elementSize = TD.getTypeSize (Ty);
745 unsigned idxReg = getReg (idx, MBB, IP);
746 unsigned OffsetReg = makeAnotherReg (Type::IntTy);
747 unsigned elementSizeReg = makeAnotherReg (Type::UIntTy);
748 copyConstantToRegister (MBB, IP,
749 ConstantUInt::get(Type::UIntTy, elementSize), elementSizeReg);
750 // Emit a SMUL to multiply the register holding the index by
751 // elementSize, putting the result in OffsetReg.
752 BuildMI (*MBB, IP, V8::SMULrr, 2,
753 OffsetReg).addReg (elementSizeReg).addReg (idxReg);
754 // Emit an ADD to add OffsetReg to the basePtr.
755 BuildMI (*MBB, IP, V8::ADDrr, 2,
756 nextBasePtrReg).addReg (basePtrReg).addReg (OffsetReg);
758 basePtrReg = nextBasePtrReg;
760 // After we have processed all the indices, the result is left in
761 // basePtrReg. Move it to the register where we were expected to
763 BuildMI (BB, V8::ORrr, 1, TargetReg).addReg (V8::G0).addReg (basePtrReg);
766 void V8ISel::visitGetElementPtrInst (GetElementPtrInst &I) {
767 unsigned outputReg = getReg (I);
768 emitGEPOperation (BB, BB->end (), I.getOperand (0),
769 I.op_begin ()+1, I.op_end (), outputReg);
773 void V8ISel::visitBinaryOperator (Instruction &I) {
774 unsigned DestReg = getReg (I);
775 unsigned Op0Reg = getReg (I.getOperand (0));
776 unsigned Op1Reg = getReg (I.getOperand (1));
778 unsigned ResultReg = DestReg;
779 if (getClassB(I.getType()) != cInt)
780 ResultReg = makeAnotherReg (I.getType ());
781 unsigned OpCase = ~0;
783 // FIXME: support long, ulong, fp.
784 switch (I.getOpcode ()) {
785 case Instruction::Add: OpCase = 0; break;
786 case Instruction::Sub: OpCase = 1; break;
787 case Instruction::Mul: OpCase = 2; break;
788 case Instruction::And: OpCase = 3; break;
789 case Instruction::Or: OpCase = 4; break;
790 case Instruction::Xor: OpCase = 5; break;
791 case Instruction::Shl: OpCase = 6; break;
792 case Instruction::Shr: OpCase = 7+I.getType()->isSigned(); break;
794 case Instruction::Div:
795 case Instruction::Rem: {
796 unsigned Dest = ResultReg;
797 if (I.getOpcode() == Instruction::Rem)
798 Dest = makeAnotherReg(I.getType());
800 // FIXME: this is probably only right for 32 bit operands.
801 if (I.getType ()->isSigned()) {
802 unsigned Tmp = makeAnotherReg (I.getType ());
803 // Sign extend into the Y register
804 BuildMI (BB, V8::SRAri, 2, Tmp).addReg (Op0Reg).addZImm (31);
805 BuildMI (BB, V8::WRrr, 2, V8::Y).addReg (Tmp).addReg (V8::G0);
806 BuildMI (BB, V8::SDIVrr, 2, Dest).addReg (Op0Reg).addReg (Op1Reg);
808 // Zero extend into the Y register, ie, just set it to zero
809 BuildMI (BB, V8::WRrr, 2, V8::Y).addReg (V8::G0).addReg (V8::G0);
810 BuildMI (BB, V8::UDIVrr, 2, Dest).addReg (Op0Reg).addReg (Op1Reg);
813 if (I.getOpcode() == Instruction::Rem) {
814 unsigned Tmp = makeAnotherReg (I.getType ());
815 BuildMI (BB, V8::SMULrr, 2, Tmp).addReg(Dest).addReg(Op1Reg);
816 BuildMI (BB, V8::SUBrr, 2, ResultReg).addReg(Op0Reg).addReg(Tmp);
821 visitInstruction (I);
825 static const unsigned Opcodes[] = {
826 V8::ADDrr, V8::SUBrr, V8::SMULrr, V8::ANDrr, V8::ORrr, V8::XORrr,
827 V8::SLLrr, V8::SRLrr, V8::SRArr
830 BuildMI (BB, Opcodes[OpCase], 2, ResultReg).addReg (Op0Reg).addReg (Op1Reg);
833 switch (getClass (I.getType ())) {
835 if (I.getType ()->isSigned ()) { // add byte
836 BuildMI (BB, V8::ANDri, 2, DestReg).addReg (ResultReg).addZImm (0xff);
837 } else { // add ubyte
838 unsigned TmpReg = makeAnotherReg (I.getType ());
839 BuildMI (BB, V8::SLLri, 2, TmpReg).addReg (ResultReg).addZImm (24);
840 BuildMI (BB, V8::SRAri, 2, DestReg).addReg (TmpReg).addZImm (24);
844 if (I.getType ()->isSigned ()) { // add short
845 unsigned TmpReg = makeAnotherReg (I.getType ());
846 BuildMI (BB, V8::SLLri, 2, TmpReg).addReg (ResultReg).addZImm (16);
847 BuildMI (BB, V8::SRAri, 2, DestReg).addReg (TmpReg).addZImm (16);
848 } else { // add ushort
849 unsigned TmpReg = makeAnotherReg (I.getType ());
850 BuildMI (BB, V8::SLLri, 2, TmpReg).addReg (ResultReg).addZImm (16);
851 BuildMI (BB, V8::SRLri, 2, DestReg).addReg (TmpReg).addZImm (16);
855 // Nothing todo here.
858 // Only support and, or, xor.
859 if (OpCase < 3 || OpCase > 5) {
860 visitInstruction (I);
863 // Do the other half of the value:
864 BuildMI (BB, Opcodes[OpCase], 2, ResultReg+1).addReg (Op0Reg+1).addReg (Op1Reg+1);
867 visitInstruction (I);
871 void V8ISel::visitSetCondInst(Instruction &I) {
872 unsigned Op0Reg = getReg (I.getOperand (0));
873 unsigned Op1Reg = getReg (I.getOperand (1));
874 unsigned DestReg = getReg (I);
875 const Type *Ty = I.getOperand (0)->getType ();
877 // Compare the two values.
878 BuildMI(BB, V8::SUBCCrr, 2, V8::G0).addReg(Op0Reg).addReg(Op1Reg);
881 switch (I.getOpcode()) {
882 default: assert(0 && "Unknown setcc instruction!");
883 case Instruction::SetEQ: BranchIdx = 0; break;
884 case Instruction::SetNE: BranchIdx = 1; break;
885 case Instruction::SetLT: BranchIdx = 2; break;
886 case Instruction::SetGT: BranchIdx = 3; break;
887 case Instruction::SetLE: BranchIdx = 4; break;
888 case Instruction::SetGE: BranchIdx = 5; break;
890 static unsigned OpcodeTab[12] = {
893 V8::BE, V8::BE, // seteq = be be
894 V8::BNE, V8::BNE, // setne = bne bne
895 V8::BCS, V8::BL, // setlt = bcs bl
896 V8::BGU, V8::BG, // setgt = bgu bg
897 V8::BLEU, V8::BLE, // setle = bleu ble
898 V8::BCC, V8::BGE // setge = bcc bge
900 unsigned Opcode = OpcodeTab[2*BranchIdx + (Ty->isSigned() ? 1 : 0)];
902 MachineBasicBlock *thisMBB = BB;
903 const BasicBlock *LLVM_BB = BB->getBasicBlock ();
906 // subcc %reg0, %reg1, %g0
910 // FIXME: we wouldn't need copy0MBB (we could fold it into thisMBB)
911 // if we could insert other, non-terminator instructions after the
912 // bCC. But MBB->getFirstTerminator() can't understand this.
913 MachineBasicBlock *copy1MBB = new MachineBasicBlock (LLVM_BB);
914 F->getBasicBlockList ().push_back (copy1MBB);
915 BuildMI (BB, Opcode, 1).addMBB (copy1MBB);
916 MachineBasicBlock *copy0MBB = new MachineBasicBlock (LLVM_BB);
917 F->getBasicBlockList ().push_back (copy0MBB);
918 BuildMI (BB, V8::BA, 1).addMBB (copy0MBB);
919 // Update machine-CFG edges
920 BB->addSuccessor (copy1MBB);
921 BB->addSuccessor (copy0MBB);
924 // %FalseValue = or %G0, 0
927 unsigned FalseValue = makeAnotherReg (I.getType ());
928 BuildMI (BB, V8::ORri, 2, FalseValue).addReg (V8::G0).addZImm (0);
929 MachineBasicBlock *sinkMBB = new MachineBasicBlock (LLVM_BB);
930 F->getBasicBlockList ().push_back (sinkMBB);
931 BuildMI (BB, V8::BA, 1).addMBB (sinkMBB);
932 // Update machine-CFG edges
933 BB->addSuccessor (sinkMBB);
935 DEBUG (std::cerr << "thisMBB is at " << (void*)thisMBB << "\n");
936 DEBUG (std::cerr << "copy1MBB is at " << (void*)copy1MBB << "\n");
937 DEBUG (std::cerr << "copy0MBB is at " << (void*)copy0MBB << "\n");
938 DEBUG (std::cerr << "sinkMBB is at " << (void*)sinkMBB << "\n");
941 // %TrueValue = or %G0, 1
944 unsigned TrueValue = makeAnotherReg (I.getType ());
945 BuildMI (BB, V8::ORri, 2, TrueValue).addReg (V8::G0).addZImm (1);
946 BuildMI (BB, V8::BA, 1).addMBB (sinkMBB);
947 // Update machine-CFG edges
948 BB->addSuccessor (sinkMBB);
951 // %Result = phi [ %FalseValue, copy0MBB ], [ %TrueValue, copy1MBB ]
954 BuildMI (BB, V8::PHI, 4, DestReg).addReg (FalseValue)
955 .addMBB (copy0MBB).addReg (TrueValue).addMBB (copy1MBB);
958 void V8ISel::visitAllocaInst(AllocaInst &I) {
959 // Find the data size of the alloca inst's getAllocatedType.
960 const Type *Ty = I.getAllocatedType();
961 unsigned TySize = TM.getTargetData().getTypeSize(Ty);
963 unsigned ArraySizeReg = getReg (I.getArraySize ());
964 unsigned TySizeReg = getReg (ConstantUInt::get (Type::UIntTy, TySize));
965 unsigned TmpReg1 = makeAnotherReg (Type::UIntTy);
966 unsigned TmpReg2 = makeAnotherReg (Type::UIntTy);
967 unsigned StackAdjReg = makeAnotherReg (Type::UIntTy);
969 // StackAdjReg = (ArraySize * TySize) rounded up to nearest doubleword boundary
970 BuildMI (BB, V8::UMULrr, 2, TmpReg1).addReg (ArraySizeReg).addReg (TySizeReg);
972 // Round up TmpReg1 to nearest doubleword boundary:
973 BuildMI (BB, V8::ADDri, 2, TmpReg2).addReg (TmpReg1).addSImm (7);
974 BuildMI (BB, V8::ANDri, 2, StackAdjReg).addReg (TmpReg2).addSImm (-8);
976 // Subtract size from stack pointer, thereby allocating some space.
977 BuildMI (BB, V8::SUBrr, 2, V8::SP).addReg (V8::SP).addReg (StackAdjReg);
979 // Put a pointer to the space into the result register, by copying
980 // the stack pointer.
981 BuildMI (BB, V8::ADDri, 2, getReg(I)).addReg (V8::SP).addSImm (96);
983 // Inform the Frame Information that we have just allocated a variable-sized
985 F->getFrameInfo()->CreateVariableSizedObject();
988 /// LowerUnknownIntrinsicFunctionCalls - This performs a prepass over the
989 /// function, lowering any calls to unknown intrinsic functions into the
990 /// equivalent LLVM code.
991 void V8ISel::LowerUnknownIntrinsicFunctionCalls(Function &F) {
992 for (Function::iterator BB = F.begin(), E = F.end(); BB != E; ++BB)
993 for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; )
994 if (CallInst *CI = dyn_cast<CallInst>(I++))
995 if (Function *F = CI->getCalledFunction())
996 switch (F->getIntrinsicID()) {
997 case Intrinsic::not_intrinsic: break;
999 // All other intrinsic calls we must lower.
1000 Instruction *Before = CI->getPrev();
1001 TM.getIntrinsicLowering().LowerIntrinsicCall(CI);
1002 if (Before) { // Move iterator to instruction after call
1011 void V8ISel::visitIntrinsicCall(Intrinsic::ID ID, CallInst &CI) {
1012 unsigned TmpReg1, TmpReg2;
1014 default: assert(0 && "Intrinsic not supported!");