1 //===-- UltraSparcSchedInfo.cpp -------------------------------------------===//
3 // Describe the scheduling characteristics of the UltraSparc
5 //===----------------------------------------------------------------------===//
7 #include "SparcInternals.h"
9 /*---------------------------------------------------------------------------
10 Scheduling guidelines for SPARC IIi:
12 I-Cache alignment rules (pg 326)
13 -- Align a branch target instruction so that it's entire group is within
14 the same cache line (may be 1-4 instructions).
15 ** Don't let a branch that is predicted taken be the last instruction
16 on an I-cache line: delay slot will need an entire line to be fetched
17 -- Make a FP instruction or a branch be the 4th instruction in a group.
18 For branches, there are tradeoffs in reordering to make this happen
20 ** Don't put a branch in a group that crosses a 32-byte boundary!
21 An artificial branch is inserted after every 32 bytes, and having
22 another branch will force the group to be broken into 2 groups.
25 -- Don't let a loop span two memory pages, if possible
27 Branch prediction performance:
28 -- Don't make the branch in a delay slot the target of a branch
29 -- Try not to have 2 predicted branches within a group of 4 instructions
30 (because each such group has a single branch target field).
31 -- Try to align branches in slots 0, 2, 4 or 6 of a cache line (to avoid
32 the wrong prediction bits being used in some cases).
34 D-Cache timing constraints:
35 -- Signed int loads of less than 64 bits have 3 cycle latency, not 2
36 -- All other loads that hit in D-Cache have 2 cycle latency
37 -- All loads are returned IN ORDER, so a D-Cache miss will delay a later hit
38 -- Mis-aligned loads or stores cause a trap. In particular, replace
39 mis-aligned FP double precision l/s with 2 single-precision l/s.
40 -- Simulations of integer codes show increase in avg. group size of
41 33% when code (including esp. non-faulting loads) is moved across
42 one branch, and 50% across 2 branches.
44 E-Cache timing constraints:
45 -- Scheduling for E-cache (D-Cache misses) is effective (due to load buffering)
47 Store buffer timing constraints:
48 -- Stores can be executed in same cycle as instruction producing the value
49 -- Stores are buffered and have lower priority for E-cache until
50 highwater mark is reached in the store buffer (5 stores)
53 -- Shifts can only use IEU0.
54 -- CC setting instructions can only use IEU1.
55 -- Several other instructions must only use IEU1:
56 EDGE(?), ARRAY(?), CALL, JMPL, BPr, PST, and FCMP.
57 -- Two instructions cannot store to the same register file in a single cycle
58 (single write port per file).
60 Issue and grouping constraints:
61 -- FP and branch instructions must use slot 4.
62 -- Shift instructions cannot be grouped with other IEU0-specific instructions.
63 -- CC setting instructions cannot be grouped with other IEU1-specific instrs.
64 -- Several instructions must be issued in a single-instruction group:
65 MOVcc or MOVr, MULs/x and DIVs/x, SAVE/RESTORE, many others
66 -- A CALL or JMPL breaks a group, ie, is not combined with subsequent instrs.
70 Branch delay slot scheduling rules:
71 -- A CTI couple (two back-to-back CTI instructions in the dynamic stream)
72 has a 9-instruction penalty: the entire pipeline is flushed when the
73 second instruction reaches stage 9 (W-Writeback).
74 -- Avoid putting multicycle instructions, and instructions that may cause
75 load misses, in the delay slot of an annulling branch.
76 -- Avoid putting WR, SAVE..., RESTORE and RETURN instructions in the
77 delay slot of an annulling branch.
79 *--------------------------------------------------------------------------- */
81 //---------------------------------------------------------------------------
82 // List of CPUResources for UltraSPARC IIi.
83 //---------------------------------------------------------------------------
85 static const CPUResource AllIssueSlots( "All Instr Slots", 4);
86 static const CPUResource IntIssueSlots( "Int Instr Slots", 3);
87 static const CPUResource First3IssueSlots("Instr Slots 0-3", 3);
88 static const CPUResource LSIssueSlots( "Load-Store Instr Slot", 1);
89 static const CPUResource CTIIssueSlots( "Ctrl Transfer Instr Slot", 1);
90 static const CPUResource FPAIssueSlots( "FP Instr Slot 1", 1);
91 static const CPUResource FPMIssueSlots( "FP Instr Slot 2", 1);
93 // IEUN instructions can use either Alu and should use IAluN.
94 // IEU0 instructions must use Alu 1 and should use both IAluN and IAlu0.
95 // IEU1 instructions must use Alu 2 and should use both IAluN and IAlu1.
96 static const CPUResource IAluN("Int ALU 1or2", 2);
97 static const CPUResource IAlu0("Int ALU 1", 1);
98 static const CPUResource IAlu1("Int ALU 2", 1);
100 static const CPUResource LSAluC1("Load/Store Unit Addr Cycle", 1);
101 static const CPUResource LSAluC2("Load/Store Unit Issue Cycle", 1);
102 static const CPUResource LdReturn("Load Return Unit", 1);
104 static const CPUResource FPMAluC1("FP Mul/Div Alu Cycle 1", 1);
105 static const CPUResource FPMAluC2("FP Mul/Div Alu Cycle 2", 1);
106 static const CPUResource FPMAluC3("FP Mul/Div Alu Cycle 3", 1);
108 static const CPUResource FPAAluC1("FP Other Alu Cycle 1", 1);
109 static const CPUResource FPAAluC2("FP Other Alu Cycle 2", 1);
110 static const CPUResource FPAAluC3("FP Other Alu Cycle 3", 1);
112 static const CPUResource IRegReadPorts("Int Reg ReadPorts", INT_MAX); // CHECK
113 static const CPUResource IRegWritePorts("Int Reg WritePorts", 2); // CHECK
114 static const CPUResource FPRegReadPorts("FP Reg Read Ports", INT_MAX);// CHECK
115 static const CPUResource FPRegWritePorts("FP Reg Write Ports", 1); // CHECK
117 static const CPUResource CTIDelayCycle( "CTI delay cycle", 1);
118 static const CPUResource FCMPDelayCycle("FCMP delay cycle", 1);
122 //---------------------------------------------------------------------------
123 // const InstrClassRUsage SparcRUsageDesc[]
126 // Resource usage information for instruction in each scheduling class.
127 // The InstrRUsage Objects for individual classes are specified first.
128 // Note that fetch and decode are decoupled from the execution pipelines
129 // via an instr buffer, so they are not included in the cycles below.
130 //---------------------------------------------------------------------------
132 static const InstrClassRUsage NoneClassRUsage = {
137 /* isSingleIssue */ false,
138 /* breaksGroup */ false,
142 /* feasibleSlots[] */ { 0, 1, 2, 3 },
156 static const InstrClassRUsage IEUNClassRUsage = {
161 /* isSingleIssue */ false,
162 /* breaksGroup */ false,
166 /* feasibleSlots[] */ { 0, 1, 2 },
170 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
171 { IntIssueSlots.rid, 0, 1 },
172 /*Cycle E */ { IAluN.rid, 1, 1 },
177 /*Cycle W */ { IRegWritePorts.rid, 6, 1 }
181 static const InstrClassRUsage IEU0ClassRUsage = {
186 /* isSingleIssue */ false,
187 /* breaksGroup */ false,
191 /* feasibleSlots[] */ { 0, 1, 2 },
195 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
196 { IntIssueSlots.rid, 0, 1 },
197 /*Cycle E */ { IAluN.rid, 1, 1 },
203 /*Cycle W */ { IRegWritePorts.rid, 6, 1 }
207 static const InstrClassRUsage IEU1ClassRUsage = {
212 /* isSingleIssue */ false,
213 /* breaksGroup */ false,
217 /* feasibleSlots[] */ { 0, 1, 2 },
221 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
222 { IntIssueSlots.rid, 0, 1 },
223 /*Cycle E */ { IAluN.rid, 1, 1 },
229 /*Cycle W */ { IRegWritePorts.rid, 6, 1 }
233 static const InstrClassRUsage FPMClassRUsage = {
238 /* isSingleIssue */ false,
239 /* breaksGroup */ false,
243 /* feasibleSlots[] */ { 0, 1, 2, 3 },
247 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
248 { FPMIssueSlots.rid, 0, 1 },
249 /*Cycle E */ { FPRegReadPorts.rid, 1, 1 },
250 /*Cycle C */ { FPMAluC1.rid, 2, 1 },
251 /*Cycle N1*/ { FPMAluC2.rid, 3, 1 },
252 /*Cycle N1*/ { FPMAluC3.rid, 4, 1 },
254 /*Cycle W */ { FPRegWritePorts.rid, 6, 1 }
258 static const InstrClassRUsage FPAClassRUsage = {
263 /* isSingleIssue */ false,
264 /* breaksGroup */ false,
268 /* feasibleSlots[] */ { 0, 1, 2, 3 },
272 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
273 { FPAIssueSlots.rid, 0, 1 },
274 /*Cycle E */ { FPRegReadPorts.rid, 1, 1 },
275 /*Cycle C */ { FPAAluC1.rid, 2, 1 },
276 /*Cycle N1*/ { FPAAluC2.rid, 3, 1 },
277 /*Cycle N1*/ { FPAAluC3.rid, 4, 1 },
279 /*Cycle W */ { FPRegWritePorts.rid, 6, 1 }
283 static const InstrClassRUsage LDClassRUsage = {
288 /* isSingleIssue */ false,
289 /* breaksGroup */ false,
293 /* feasibleSlots[] */ { 0, 1, 2, },
297 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
298 { First3IssueSlots.rid, 0, 1 },
299 { LSIssueSlots.rid, 0, 1 },
300 /*Cycle E */ { LSAluC1.rid, 1, 1 },
301 /*Cycle C */ { LSAluC2.rid, 2, 1 },
302 { LdReturn.rid, 2, 1 },
306 /*Cycle W */ { IRegWritePorts.rid, 6, 1 }
310 static const InstrClassRUsage STClassRUsage = {
315 /* isSingleIssue */ false,
316 /* breaksGroup */ false,
320 /* feasibleSlots[] */ { 0, 1, 2 },
324 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
325 { First3IssueSlots.rid, 0, 1 },
326 { LSIssueSlots.rid, 0, 1 },
327 /*Cycle E */ { LSAluC1.rid, 1, 1 },
328 /*Cycle C */ { LSAluC2.rid, 2, 1 }
336 static const InstrClassRUsage CTIClassRUsage = {
341 /* isSingleIssue */ false,
342 /* breaksGroup */ false,
346 /* feasibleSlots[] */ { 0, 1, 2, 3 },
350 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
351 { CTIIssueSlots.rid, 0, 1 },
352 /*Cycle E */ { IAlu0.rid, 1, 1 },
353 /*Cycles E-C */ { CTIDelayCycle.rid, 1, 2 }
362 static const InstrClassRUsage SingleClassRUsage = {
367 /* isSingleIssue */ true,
368 /* breaksGroup */ false,
372 /* feasibleSlots[] */ { 0 },
376 /*Cycle G */ { AllIssueSlots.rid, 0, 1 },
377 { AllIssueSlots.rid, 0, 1 },
378 { AllIssueSlots.rid, 0, 1 },
379 { AllIssueSlots.rid, 0, 1 },
380 /*Cycle E */ { IAlu0.rid, 1, 1 }
390 static const InstrClassRUsage SparcRUsageDesc[] = {
405 //---------------------------------------------------------------------------
406 // const InstrIssueDelta SparcInstrIssueDeltas[]
409 // Changes to issue restrictions information in InstrClassRUsage for
410 // instructions that differ from other instructions in their class.
411 //---------------------------------------------------------------------------
413 static const InstrIssueDelta SparcInstrIssueDeltas[] = {
415 // opCode, isSingleIssue, breaksGroup, numBubbles
417 // Special cases for single-issue only
418 // Other single issue cases are below.
419 //{ V9::LDDA, true, true, 0 },
420 //{ V9::STDA, true, true, 0 },
421 //{ V9::LDDF, true, true, 0 },
422 //{ V9::LDDFA, true, true, 0 },
423 { V9::ADDCr, true, true, 0 },
424 { V9::ADDCi, true, true, 0 },
425 { V9::ADDCccr, true, true, 0 },
426 { V9::ADDCcci, true, true, 0 },
427 { V9::SUBCr, true, true, 0 },
428 { V9::SUBCi, true, true, 0 },
429 { V9::SUBCccr, true, true, 0 },
430 { V9::SUBCcci, true, true, 0 },
431 //{ V9::LDSTUB, true, true, 0 },
432 //{ V9::SWAP, true, true, 0 },
433 //{ V9::SWAPA, true, true, 0 },
434 //{ V9::CAS, true, true, 0 },
435 //{ V9::CASA, true, true, 0 },
436 //{ V9::CASX, true, true, 0 },
437 //{ V9::CASXA, true, true, 0 },
438 //{ V9::LDFSR, true, true, 0 },
439 //{ V9::LDFSRA, true, true, 0 },
440 //{ V9::LDXFSR, true, true, 0 },
441 //{ V9::LDXFSRA, true, true, 0 },
442 //{ V9::STFSR, true, true, 0 },
443 //{ V9::STFSRA, true, true, 0 },
444 //{ V9::STXFSR, true, true, 0 },
445 //{ V9::STXFSRA, true, true, 0 },
446 //{ V9::SAVED, true, true, 0 },
447 //{ V9::RESTORED, true, true, 0 },
448 //{ V9::FLUSH, true, true, 9 },
449 //{ V9::FLUSHW, true, true, 9 },
450 //{ V9::ALIGNADDR, true, true, 0 },
451 { V9::RETURNr, true, true, 0 },
452 { V9::RETURNi, true, true, 0 },
453 //{ V9::DONE, true, true, 0 },
454 //{ V9::RETRY, true, true, 0 },
455 //{ V9::TCC, true, true, 0 },
456 //{ V9::SHUTDOWN, true, true, 0 },
458 // Special cases for breaking group *before*
459 // CURRENTLY NOT SUPPORTED!
460 { V9::CALL, false, false, 0 },
461 { V9::JMPLCALLr, false, false, 0 },
462 { V9::JMPLCALLi, false, false, 0 },
463 { V9::JMPLRETr, false, false, 0 },
464 { V9::JMPLRETi, false, false, 0 },
466 // Special cases for breaking the group *after*
467 { V9::MULXr, true, true, (4+34)/2 },
468 { V9::MULXi, true, true, (4+34)/2 },
469 { V9::FDIVS, false, true, 0 },
470 { V9::FDIVD, false, true, 0 },
471 { V9::FDIVQ, false, true, 0 },
472 { V9::FSQRTS, false, true, 0 },
473 { V9::FSQRTD, false, true, 0 },
474 { V9::FSQRTQ, false, true, 0 },
475 //{ V9::FCMP{LE,GT,NE,EQ}, false, true, 0 },
477 // Instructions that introduce bubbles
478 //{ V9::MULScc, true, true, 2 },
479 //{ V9::SMULcc, true, true, (4+18)/2 },
480 //{ V9::UMULcc, true, true, (4+19)/2 },
481 { V9::SDIVXr, true, true, 68 },
482 { V9::SDIVXi, true, true, 68 },
483 { V9::UDIVXr, true, true, 68 },
484 { V9::UDIVXi, true, true, 68 },
485 //{ V9::SDIVcc, true, true, 36 },
486 //{ V9::UDIVcc, true, true, 37 },
487 { V9::WRCCR, true, true, 4 },
488 //{ V9::WRPR, true, true, 4 },
489 //{ V9::RDCCR, true, true, 0 }, // no bubbles after, but see below
490 //{ V9::RDPR, true, true, 0 },
496 //---------------------------------------------------------------------------
497 // const InstrRUsageDelta SparcInstrUsageDeltas[]
500 // Changes to resource usage information in InstrClassRUsage for
501 // instructions that differ from other instructions in their class.
502 //---------------------------------------------------------------------------
504 static const InstrRUsageDelta SparcInstrUsageDeltas[] = {
506 // MachineOpCode, Resource, Start cycle, Num cycles
509 // JMPL counts as a load/store instruction for issue!
511 { V9::JMPLCALLr, LSIssueSlots.rid, 0, 1 },
512 { V9::JMPLCALLi, LSIssueSlots.rid, 0, 1 },
513 { V9::JMPLRETr, LSIssueSlots.rid, 0, 1 },
514 { V9::JMPLRETi, LSIssueSlots.rid, 0, 1 },
517 // Many instructions cannot issue for the next 2 cycles after an FCMP
518 // We model that with a fake resource FCMPDelayCycle.
520 { V9::FCMPS, FCMPDelayCycle.rid, 1, 3 },
521 { V9::FCMPD, FCMPDelayCycle.rid, 1, 3 },
522 { V9::FCMPQ, FCMPDelayCycle.rid, 1, 3 },
524 { V9::MULXr, FCMPDelayCycle.rid, 1, 1 },
525 { V9::MULXi, FCMPDelayCycle.rid, 1, 1 },
526 { V9::SDIVXr, FCMPDelayCycle.rid, 1, 1 },
527 { V9::SDIVXi, FCMPDelayCycle.rid, 1, 1 },
528 { V9::UDIVXr, FCMPDelayCycle.rid, 1, 1 },
529 { V9::UDIVXi, FCMPDelayCycle.rid, 1, 1 },
530 //{ V9::SMULcc, FCMPDelayCycle.rid, 1, 1 },
531 //{ V9::UMULcc, FCMPDelayCycle.rid, 1, 1 },
532 //{ V9::SDIVcc, FCMPDelayCycle.rid, 1, 1 },
533 //{ V9::UDIVcc, FCMPDelayCycle.rid, 1, 1 },
534 { V9::STDFr, FCMPDelayCycle.rid, 1, 1 },
535 { V9::STDFi, FCMPDelayCycle.rid, 1, 1 },
536 { V9::FMOVRSZ, FCMPDelayCycle.rid, 1, 1 },
537 { V9::FMOVRSLEZ,FCMPDelayCycle.rid, 1, 1 },
538 { V9::FMOVRSLZ, FCMPDelayCycle.rid, 1, 1 },
539 { V9::FMOVRSNZ, FCMPDelayCycle.rid, 1, 1 },
540 { V9::FMOVRSGZ, FCMPDelayCycle.rid, 1, 1 },
541 { V9::FMOVRSGEZ,FCMPDelayCycle.rid, 1, 1 },
544 // Some instructions are stalled in the GROUP stage if a CTI is in
545 // the E or C stage. We model that with a fake resource CTIDelayCycle.
547 { V9::LDDFr, CTIDelayCycle.rid, 1, 1 },
548 { V9::LDDFi, CTIDelayCycle.rid, 1, 1 },
549 //{ V9::LDDA, CTIDelayCycle.rid, 1, 1 },
550 //{ V9::LDDSTUB, CTIDelayCycle.rid, 1, 1 },
551 //{ V9::LDDSTUBA, CTIDelayCycle.rid, 1, 1 },
552 //{ V9::SWAP, CTIDelayCycle.rid, 1, 1 },
553 //{ V9::SWAPA, CTIDelayCycle.rid, 1, 1 },
554 //{ V9::CAS, CTIDelayCycle.rid, 1, 1 },
555 //{ V9::CASA, CTIDelayCycle.rid, 1, 1 },
556 //{ V9::CASX, CTIDelayCycle.rid, 1, 1 },
557 //{ V9::CASXA, CTIDelayCycle.rid, 1, 1 },
560 // Signed int loads of less than dword size return data in cycle N1 (not C)
561 // and put all loads in consecutive cycles into delayed load return mode.
563 { V9::LDSBr, LdReturn.rid, 2, -1 },
564 { V9::LDSBr, LdReturn.rid, 3, 1 },
565 { V9::LDSBi, LdReturn.rid, 2, -1 },
566 { V9::LDSBi, LdReturn.rid, 3, 1 },
568 { V9::LDSHr, LdReturn.rid, 2, -1 },
569 { V9::LDSHr, LdReturn.rid, 3, 1 },
570 { V9::LDSHi, LdReturn.rid, 2, -1 },
571 { V9::LDSHi, LdReturn.rid, 3, 1 },
573 { V9::LDSWr, LdReturn.rid, 2, -1 },
574 { V9::LDSWr, LdReturn.rid, 3, 1 },
575 { V9::LDSWi, LdReturn.rid, 2, -1 },
576 { V9::LDSWi, LdReturn.rid, 3, 1 },
579 // RDPR from certain registers and RD from any register are not dispatchable
580 // until four clocks after they reach the head of the instr. buffer.
581 // Together with their single-issue requirement, this means all four issue
582 // slots are effectively blocked for those cycles, plus the issue cycle.
583 // This does not increase the latency of the instruction itself.
585 { V9::RDCCR, AllIssueSlots.rid, 0, 5 },
586 { V9::RDCCR, AllIssueSlots.rid, 0, 5 },
587 { V9::RDCCR, AllIssueSlots.rid, 0, 5 },
588 { V9::RDCCR, AllIssueSlots.rid, 0, 5 },
590 #undef EXPLICIT_BUBBLES_NEEDED
591 #ifdef EXPLICIT_BUBBLES_NEEDED
593 // MULScc inserts one bubble.
594 // This means it breaks the current group (captured in UltraSparcSchedInfo)
595 // *and occupies all issue slots for the next cycle
597 //{ V9::MULScc, AllIssueSlots.rid, 2, 2-1 },
598 //{ V9::MULScc, AllIssueSlots.rid, 2, 2-1 },
599 //{ V9::MULScc, AllIssueSlots.rid, 2, 2-1 },
600 //{ V9::MULScc, AllIssueSlots.rid, 2, 2-1 },
603 // SMULcc inserts between 4 and 18 bubbles, depending on #leading 0s in rs1.
604 // We just model this with a simple average.
606 //{ V9::SMULcc, AllIssueSlots.rid, 2, ((4+18)/2)-1 },
607 //{ V9::SMULcc, AllIssueSlots.rid, 2, ((4+18)/2)-1 },
608 //{ V9::SMULcc, AllIssueSlots.rid, 2, ((4+18)/2)-1 },
609 //{ V9::SMULcc, AllIssueSlots.rid, 2, ((4+18)/2)-1 },
611 // SMULcc inserts between 4 and 19 bubbles, depending on #leading 0s in rs1.
612 //{ V9::UMULcc, AllIssueSlots.rid, 2, ((4+19)/2)-1 },
613 //{ V9::UMULcc, AllIssueSlots.rid, 2, ((4+19)/2)-1 },
614 //{ V9::UMULcc, AllIssueSlots.rid, 2, ((4+19)/2)-1 },
615 //{ V9::UMULcc, AllIssueSlots.rid, 2, ((4+19)/2)-1 },
618 // MULX inserts between 4 and 34 bubbles, depending on #leading 0s in rs1.
620 { V9::MULX, AllIssueSlots.rid, 2, ((4+34)/2)-1 },
621 { V9::MULX, AllIssueSlots.rid, 2, ((4+34)/2)-1 },
622 { V9::MULX, AllIssueSlots.rid, 2, ((4+34)/2)-1 },
623 { V9::MULX, AllIssueSlots.rid, 2, ((4+34)/2)-1 },
626 // SDIVcc inserts 36 bubbles.
628 //{ V9::SDIVcc, AllIssueSlots.rid, 2, 36-1 },
629 //{ V9::SDIVcc, AllIssueSlots.rid, 2, 36-1 },
630 //{ V9::SDIVcc, AllIssueSlots.rid, 2, 36-1 },
631 //{ V9::SDIVcc, AllIssueSlots.rid, 2, 36-1 },
633 // UDIVcc inserts 37 bubbles.
634 //{ V9::UDIVcc, AllIssueSlots.rid, 2, 37-1 },
635 //{ V9::UDIVcc, AllIssueSlots.rid, 2, 37-1 },
636 //{ V9::UDIVcc, AllIssueSlots.rid, 2, 37-1 },
637 //{ V9::UDIVcc, AllIssueSlots.rid, 2, 37-1 },
640 // SDIVX inserts 68 bubbles.
642 { V9::SDIVX, AllIssueSlots.rid, 2, 68-1 },
643 { V9::SDIVX, AllIssueSlots.rid, 2, 68-1 },
644 { V9::SDIVX, AllIssueSlots.rid, 2, 68-1 },
645 { V9::SDIVX, AllIssueSlots.rid, 2, 68-1 },
648 // UDIVX inserts 68 bubbles.
650 { V9::UDIVX, AllIssueSlots.rid, 2, 68-1 },
651 { V9::UDIVX, AllIssueSlots.rid, 2, 68-1 },
652 { V9::UDIVX, AllIssueSlots.rid, 2, 68-1 },
653 { V9::UDIVX, AllIssueSlots.rid, 2, 68-1 },
656 // WR inserts 4 bubbles.
658 //{ V9::WR, AllIssueSlots.rid, 2, 68-1 },
659 //{ V9::WR, AllIssueSlots.rid, 2, 68-1 },
660 //{ V9::WR, AllIssueSlots.rid, 2, 68-1 },
661 //{ V9::WR, AllIssueSlots.rid, 2, 68-1 },
664 // WRPR inserts 4 bubbles.
666 //{ V9::WRPR, AllIssueSlots.rid, 2, 68-1 },
667 //{ V9::WRPR, AllIssueSlots.rid, 2, 68-1 },
668 //{ V9::WRPR, AllIssueSlots.rid, 2, 68-1 },
669 //{ V9::WRPR, AllIssueSlots.rid, 2, 68-1 },
672 // DONE inserts 9 bubbles.
674 //{ V9::DONE, AllIssueSlots.rid, 2, 9-1 },
675 //{ V9::DONE, AllIssueSlots.rid, 2, 9-1 },
676 //{ V9::DONE, AllIssueSlots.rid, 2, 9-1 },
677 //{ V9::DONE, AllIssueSlots.rid, 2, 9-1 },
680 // RETRY inserts 9 bubbles.
682 //{ V9::RETRY, AllIssueSlots.rid, 2, 9-1 },
683 //{ V9::RETRY, AllIssueSlots.rid, 2, 9-1 },
684 //{ V9::RETRY, AllIssueSlots.rid, 2, 9-1 },
685 //{ V9::RETRY, AllIssueSlots.rid, 2, 9-1 },
687 #endif /*EXPLICIT_BUBBLES_NEEDED */
690 // Additional delays to be captured in code:
691 // 1. RDPR from several state registers (page 349)
692 // 2. RD from *any* register (page 349)
693 // 3. Writes to TICK, PSTATE, TL registers and FLUSH{W} instr (page 349)
694 // 4. Integer store can be in same group as instr producing value to store.
695 // 5. BICC and BPICC can be in the same group as instr producing CC (pg 350)
696 // 6. FMOVr cannot be in the same or next group as an IEU instr (pg 351).
697 // 7. The second instr. of a CTI group inserts 9 bubbles (pg 351)
698 // 8. WR{PR}, SVAE, SAVED, RESTORE, RESTORED, RETURN, RETRY, and DONE that
699 // follow an annulling branch cannot be issued in the same group or in
700 // the 3 groups following the branch.
701 // 9. A predicted annulled load does not stall dependent instructions.
702 // Other annulled delay slot instructions *do* stall dependents, so
703 // nothing special needs to be done for them during scheduling.
704 //10. Do not put a load use that may be annulled in the same group as the
705 // branch. The group will stall until the load returns.
706 //11. Single-prec. FP loads lock 2 registers, for dependency checking.
709 // Additional delays we cannot or will not capture:
710 // 1. If DCTI is last word of cache line, it is delayed until next line can be
711 // fetched. Also, other DCTI alignment-related delays (pg 352)
712 // 2. Load-after-store is delayed by 7 extra cycles if load hits in D-Cache.
713 // Also, several other store-load and load-store conflicts (pg 358)
714 // 3. MEMBAR, LD{X}FSR, LDD{A} and a bunch of other load stalls (pg 358)
715 // 4. There can be at most 8 outstanding buffered store instructions
716 // (including some others like MEMBAR, LDSTUB, CAS{AX}, and FLUSH)
720 //---------------------------------------------------------------------------
721 // class UltraSparcSchedInfo
724 // Scheduling information for the UltraSPARC.
725 // Primarily just initializes machine-dependent parameters in
726 // class TargetSchedInfo.
727 //---------------------------------------------------------------------------
730 UltraSparcSchedInfo::UltraSparcSchedInfo(const TargetMachine& tgt)
731 : TargetSchedInfo(tgt,
732 (unsigned int) SPARC_NUM_SCHED_CLASSES,
734 SparcInstrUsageDeltas,
735 SparcInstrIssueDeltas,
736 sizeof(SparcInstrUsageDeltas)/sizeof(InstrRUsageDelta),
737 sizeof(SparcInstrIssueDeltas)/sizeof(InstrIssueDelta))
739 maxNumIssueTotal = 4;
740 longestIssueConflict = 0; // computed from issuesGaps[]
742 branchMispredictPenalty = 4; // 4 for SPARC IIi
743 branchTargetUnknownPenalty = 2; // 2 for SPARC IIi
744 l1DCacheMissPenalty = 8; // 7 or 9 for SPARC IIi
745 l1ICacheMissPenalty = 8; // ? for SPARC IIi
747 inOrderLoads = true; // true for SPARC IIi
748 inOrderIssue = true; // true for SPARC IIi
749 inOrderExec = false; // false for most architectures
750 inOrderRetire= true; // true for most architectures
752 // must be called after above parameters are initialized.
753 initializeResources();
757 UltraSparcSchedInfo::initializeResources()
759 // Compute TargetSchedInfo::instrRUsages and TargetSchedInfo::issueGaps
760 TargetSchedInfo::initializeResources();
762 // Machine-dependent fixups go here. None for now.