1 //===-- X86ISelSimple.cpp - A simple instruction selector for x86 ---------===//
3 // The LLVM Compiler Infrastructure
5 // This file was developed by the LLVM research group and is distributed under
6 // the University of Illinois Open Source License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This file defines a simple peephole instruction selector for the x86 target
12 //===----------------------------------------------------------------------===//
15 #include "X86InstrBuilder.h"
16 #include "X86InstrInfo.h"
17 #include "llvm/Constants.h"
18 #include "llvm/DerivedTypes.h"
19 #include "llvm/Function.h"
20 #include "llvm/Instructions.h"
21 #include "llvm/Pass.h"
22 #include "llvm/CodeGen/IntrinsicLowering.h"
23 #include "llvm/CodeGen/MachineConstantPool.h"
24 #include "llvm/CodeGen/MachineFrameInfo.h"
25 #include "llvm/CodeGen/MachineFunction.h"
26 #include "llvm/CodeGen/SSARegMap.h"
27 #include "llvm/Target/MRegisterInfo.h"
28 #include "llvm/Target/TargetMachine.h"
29 #include "llvm/Support/GetElementPtrTypeIterator.h"
30 #include "llvm/Support/InstVisitor.h"
31 #include "llvm/ADT/Statistic.h"
36 NumFPKill("x86-codegen", "Number of FP_REG_KILL instructions added");
38 /// TypeClass - Used by the X86 backend to group LLVM types by their basic X86
42 cByte, cShort, cInt, cFP, cLong
46 /// getClass - Turn a primitive type into a "class" number which is based on the
47 /// size of the type, and whether or not it is floating point.
49 static inline TypeClass getClass(const Type *Ty) {
50 switch (Ty->getTypeID()) {
52 case Type::UByteTyID: return cByte; // Byte operands are class #0
54 case Type::UShortTyID: return cShort; // Short operands are class #1
57 case Type::PointerTyID: return cInt; // Int's and pointers are class #2
60 case Type::DoubleTyID: return cFP; // Floating Point is #3
63 case Type::ULongTyID: return cLong; // Longs are class #4
65 assert(0 && "Invalid type to getClass!");
66 return cByte; // not reached
70 // getClassB - Just like getClass, but treat boolean values as bytes.
71 static inline TypeClass getClassB(const Type *Ty) {
72 if (Ty == Type::BoolTy) return cByte;
77 struct X86ISel : public FunctionPass, InstVisitor<X86ISel> {
79 MachineFunction *F; // The function we are compiling into
80 MachineBasicBlock *BB; // The current MBB we are compiling
81 int VarArgsFrameIndex; // FrameIndex for start of varargs area
82 int ReturnAddressIndex; // FrameIndex for the return address
84 std::map<Value*, unsigned> RegMap; // Mapping between Val's and SSA Regs
86 // MBBMap - Mapping between LLVM BB -> Machine BB
87 std::map<const BasicBlock*, MachineBasicBlock*> MBBMap;
89 // AllocaMap - Mapping from fixed sized alloca instructions to the
90 // FrameIndex for the alloca.
91 std::map<AllocaInst*, unsigned> AllocaMap;
93 X86ISel(TargetMachine &tm) : TM(tm), F(0), BB(0) {}
95 /// runOnFunction - Top level implementation of instruction selection for
96 /// the entire function.
98 bool runOnFunction(Function &Fn) {
99 // Lazily create a stack slot for the return address if needed.
100 ReturnAddressIndex = 0;
102 // First pass over the function, lower any unknown intrinsic functions
103 // with the IntrinsicLowering class.
104 LowerUnknownIntrinsicFunctionCalls(Fn);
106 F = &MachineFunction::construct(&Fn, TM);
108 // Create all of the machine basic blocks for the function...
109 for (Function::iterator I = Fn.begin(), E = Fn.end(); I != E; ++I)
110 F->getBasicBlockList().push_back(MBBMap[I] = new MachineBasicBlock(I));
114 // Copy incoming arguments off of the stack...
115 LoadArgumentsToVirtualRegs(Fn);
117 // If this is main, emit special code.
118 if (Fn.hasExternalLinkage() && Fn.getName() == "main")
119 EmitSpecialCodeForMain();
121 // Instruction select everything except PHI nodes
124 // Select the PHI nodes
127 // Insert the FP_REG_KILL instructions into blocks that need them.
134 // We always build a machine code representation for the function
138 virtual const char *getPassName() const {
139 return "X86 Simple Instruction Selection";
142 /// EmitSpecialCodeForMain - Emit any code that needs to be executed only in
143 /// the main function.
144 void EmitSpecialCodeForMain();
146 /// visitBasicBlock - This method is called when we are visiting a new basic
147 /// block. This simply creates a new MachineBasicBlock to emit code into
148 /// and adds it to the current MachineFunction. Subsequent visit* for
149 /// instructions will be invoked for all instructions in the basic block.
151 void visitBasicBlock(BasicBlock &LLVM_BB) {
152 BB = MBBMap[&LLVM_BB];
155 /// LowerUnknownIntrinsicFunctionCalls - This performs a prepass over the
156 /// function, lowering any calls to unknown intrinsic functions into the
157 /// equivalent LLVM code.
159 void LowerUnknownIntrinsicFunctionCalls(Function &F);
161 /// LoadArgumentsToVirtualRegs - Load all of the arguments to this function
162 /// from the stack into virtual registers.
164 void LoadArgumentsToVirtualRegs(Function &F);
166 /// SelectPHINodes - Insert machine code to generate phis. This is tricky
167 /// because we have to generate our sources into the source basic blocks,
168 /// not the current one.
170 void SelectPHINodes();
172 /// InsertFPRegKills - Insert FP_REG_KILL instructions into basic blocks
173 /// that need them. This only occurs due to the floating point stackifier
174 /// not being aggressive enough to handle arbitrary global stackification.
176 void InsertFPRegKills();
178 // Visitation methods for various instructions. These methods simply emit
179 // fixed X86 code for each instruction.
182 // Control flow operators
183 void visitReturnInst(ReturnInst &RI);
184 void visitBranchInst(BranchInst &BI);
185 void visitUnreachableInst(UnreachableInst &UI) {}
191 ValueRecord(unsigned R, const Type *T) : Val(0), Reg(R), Ty(T) {}
192 ValueRecord(Value *V) : Val(V), Reg(0), Ty(V->getType()) {}
194 void doCall(const ValueRecord &Ret, MachineInstr *CallMI,
195 const std::vector<ValueRecord> &Args);
196 void visitCallInst(CallInst &I);
197 void visitIntrinsicCall(Intrinsic::ID ID, CallInst &I);
199 // Arithmetic operators
200 void visitSimpleBinary(BinaryOperator &B, unsigned OpcodeClass);
201 void visitAdd(BinaryOperator &B) { visitSimpleBinary(B, 0); }
202 void visitSub(BinaryOperator &B) { visitSimpleBinary(B, 1); }
203 void visitMul(BinaryOperator &B);
205 void visitDiv(BinaryOperator &B) { visitDivRem(B); }
206 void visitRem(BinaryOperator &B) { visitDivRem(B); }
207 void visitDivRem(BinaryOperator &B);
210 void visitAnd(BinaryOperator &B) { visitSimpleBinary(B, 2); }
211 void visitOr (BinaryOperator &B) { visitSimpleBinary(B, 3); }
212 void visitXor(BinaryOperator &B) { visitSimpleBinary(B, 4); }
214 // Comparison operators...
215 void visitSetCondInst(SetCondInst &I);
216 unsigned EmitComparison(unsigned OpNum, Value *Op0, Value *Op1,
217 MachineBasicBlock *MBB,
218 MachineBasicBlock::iterator MBBI);
219 void visitSelectInst(SelectInst &SI);
222 // Memory Instructions
223 void visitLoadInst(LoadInst &I);
224 void visitStoreInst(StoreInst &I);
225 void visitGetElementPtrInst(GetElementPtrInst &I);
226 void visitAllocaInst(AllocaInst &I);
227 void visitMallocInst(MallocInst &I);
228 void visitFreeInst(FreeInst &I);
231 void visitShiftInst(ShiftInst &I);
232 void visitPHINode(PHINode &I) {} // PHI nodes handled by second pass
233 void visitCastInst(CastInst &I);
234 void visitVANextInst(VANextInst &I);
235 void visitVAArgInst(VAArgInst &I);
237 void visitInstruction(Instruction &I) {
238 std::cerr << "Cannot instruction select: " << I;
242 /// promote32 - Make a value 32-bits wide, and put it somewhere.
244 void promote32(unsigned targetReg, const ValueRecord &VR);
246 /// getAddressingMode - Get the addressing mode to use to address the
247 /// specified value. The returned value should be used with addFullAddress.
248 void getAddressingMode(Value *Addr, X86AddressMode &AM);
251 /// getGEPIndex - This is used to fold GEP instructions into X86 addressing
253 void getGEPIndex(MachineBasicBlock *MBB, MachineBasicBlock::iterator IP,
254 std::vector<Value*> &GEPOps,
255 std::vector<const Type*> &GEPTypes,
258 /// isGEPFoldable - Return true if the specified GEP can be completely
259 /// folded into the addressing mode of a load/store or lea instruction.
260 bool isGEPFoldable(MachineBasicBlock *MBB,
261 Value *Src, User::op_iterator IdxBegin,
262 User::op_iterator IdxEnd, X86AddressMode &AM);
264 /// emitGEPOperation - Common code shared between visitGetElementPtrInst and
265 /// constant expression GEP support.
267 void emitGEPOperation(MachineBasicBlock *BB, MachineBasicBlock::iterator IP,
268 Value *Src, User::op_iterator IdxBegin,
269 User::op_iterator IdxEnd, unsigned TargetReg);
271 /// emitCastOperation - Common code shared between visitCastInst and
272 /// constant expression cast support.
274 void emitCastOperation(MachineBasicBlock *BB,MachineBasicBlock::iterator IP,
275 Value *Src, const Type *DestTy, unsigned TargetReg);
277 /// emitSimpleBinaryOperation - Common code shared between visitSimpleBinary
278 /// and constant expression support.
280 void emitSimpleBinaryOperation(MachineBasicBlock *BB,
281 MachineBasicBlock::iterator IP,
282 Value *Op0, Value *Op1,
283 unsigned OperatorClass, unsigned TargetReg);
285 /// emitBinaryFPOperation - This method handles emission of floating point
286 /// Add (0), Sub (1), Mul (2), and Div (3) operations.
287 void emitBinaryFPOperation(MachineBasicBlock *BB,
288 MachineBasicBlock::iterator IP,
289 Value *Op0, Value *Op1,
290 unsigned OperatorClass, unsigned TargetReg);
292 void emitMultiply(MachineBasicBlock *BB, MachineBasicBlock::iterator IP,
293 Value *Op0, Value *Op1, unsigned TargetReg);
295 void doMultiply(MachineBasicBlock *MBB, MachineBasicBlock::iterator MBBI,
296 unsigned DestReg, const Type *DestTy,
297 unsigned Op0Reg, unsigned Op1Reg);
298 void doMultiplyConst(MachineBasicBlock *MBB,
299 MachineBasicBlock::iterator MBBI,
300 unsigned DestReg, const Type *DestTy,
301 unsigned Op0Reg, unsigned Op1Val);
303 void emitDivRemOperation(MachineBasicBlock *BB,
304 MachineBasicBlock::iterator IP,
305 Value *Op0, Value *Op1, bool isDiv,
308 /// emitSetCCOperation - Common code shared between visitSetCondInst and
309 /// constant expression support.
311 void emitSetCCOperation(MachineBasicBlock *BB,
312 MachineBasicBlock::iterator IP,
313 Value *Op0, Value *Op1, unsigned Opcode,
316 /// emitShiftOperation - Common code shared between visitShiftInst and
317 /// constant expression support.
319 void emitShiftOperation(MachineBasicBlock *MBB,
320 MachineBasicBlock::iterator IP,
321 Value *Op, Value *ShiftAmount, bool isLeftShift,
322 const Type *ResultTy, unsigned DestReg);
324 // Emit code for a 'SHLD DestReg, Op0, Op1, Amt' operation, where Amt is a
326 void doSHLDConst(MachineBasicBlock *MBB,
327 MachineBasicBlock::iterator MBBI,
328 unsigned DestReg, unsigned Op0Reg, unsigned Op1Reg,
331 /// emitSelectOperation - Common code shared between visitSelectInst and the
332 /// constant expression support.
333 void emitSelectOperation(MachineBasicBlock *MBB,
334 MachineBasicBlock::iterator IP,
335 Value *Cond, Value *TrueVal, Value *FalseVal,
338 /// copyConstantToRegister - Output the instructions required to put the
339 /// specified constant into the specified register.
341 void copyConstantToRegister(MachineBasicBlock *MBB,
342 MachineBasicBlock::iterator MBBI,
343 Constant *C, unsigned Reg);
345 void emitUCOMr(MachineBasicBlock *MBB, MachineBasicBlock::iterator MBBI,
346 unsigned LHS, unsigned RHS);
348 /// makeAnotherReg - This method returns the next register number we haven't
351 /// Long values are handled somewhat specially. They are always allocated
352 /// as pairs of 32 bit integer values. The register number returned is the
353 /// lower 32 bits of the long value, and the regNum+1 is the upper 32 bits
354 /// of the long value.
356 unsigned makeAnotherReg(const Type *Ty) {
357 assert(dynamic_cast<const X86RegisterInfo*>(TM.getRegisterInfo()) &&
358 "Current target doesn't have X86 reg info??");
359 const X86RegisterInfo *MRI =
360 static_cast<const X86RegisterInfo*>(TM.getRegisterInfo());
361 if (Ty == Type::LongTy || Ty == Type::ULongTy) {
362 const TargetRegisterClass *RC = MRI->getRegClassForType(Type::IntTy);
363 // Create the lower part
364 F->getSSARegMap()->createVirtualRegister(RC);
365 // Create the upper part.
366 return F->getSSARegMap()->createVirtualRegister(RC)-1;
369 // Add the mapping of regnumber => reg class to MachineFunction
370 const TargetRegisterClass *RC = MRI->getRegClassForType(Ty);
371 return F->getSSARegMap()->createVirtualRegister(RC);
374 /// getReg - This method turns an LLVM value into a register number.
376 unsigned getReg(Value &V) { return getReg(&V); } // Allow references
377 unsigned getReg(Value *V) {
378 // Just append to the end of the current bb.
379 MachineBasicBlock::iterator It = BB->end();
380 return getReg(V, BB, It);
382 unsigned getReg(Value *V, MachineBasicBlock *MBB,
383 MachineBasicBlock::iterator IPt);
385 /// getFixedSizedAllocaFI - Return the frame index for a fixed sized alloca
386 /// that is to be statically allocated with the initial stack frame
388 unsigned getFixedSizedAllocaFI(AllocaInst *AI);
392 /// dyn_castFixedAlloca - If the specified value is a fixed size alloca
393 /// instruction in the entry block, return it. Otherwise, return a null
395 static AllocaInst *dyn_castFixedAlloca(Value *V) {
396 if (AllocaInst *AI = dyn_cast<AllocaInst>(V)) {
397 BasicBlock *BB = AI->getParent();
398 if (isa<ConstantUInt>(AI->getArraySize()) && BB ==&BB->getParent()->front())
404 /// getReg - This method turns an LLVM value into a register number.
406 unsigned X86ISel::getReg(Value *V, MachineBasicBlock *MBB,
407 MachineBasicBlock::iterator IPt) {
408 // If this operand is a constant, emit the code to copy the constant into
409 // the register here...
410 if (Constant *C = dyn_cast<Constant>(V)) {
411 unsigned Reg = makeAnotherReg(V->getType());
412 copyConstantToRegister(MBB, IPt, C, Reg);
414 } else if (CastInst *CI = dyn_cast<CastInst>(V)) {
415 // Do not emit noop casts at all, unless it's a double -> float cast.
416 if (getClassB(CI->getType()) == getClassB(CI->getOperand(0)->getType()) &&
417 (CI->getType() != Type::FloatTy ||
418 CI->getOperand(0)->getType() != Type::DoubleTy))
419 return getReg(CI->getOperand(0), MBB, IPt);
420 } else if (AllocaInst *AI = dyn_castFixedAlloca(V)) {
421 // If the alloca address couldn't be folded into the instruction addressing,
422 // emit an explicit LEA as appropriate.
423 unsigned Reg = makeAnotherReg(V->getType());
424 unsigned FI = getFixedSizedAllocaFI(AI);
425 addFrameReference(BuildMI(*MBB, IPt, X86::LEA32r, 4, Reg), FI);
429 unsigned &Reg = RegMap[V];
431 Reg = makeAnotherReg(V->getType());
438 /// getFixedSizedAllocaFI - Return the frame index for a fixed sized alloca
439 /// that is to be statically allocated with the initial stack frame
441 unsigned X86ISel::getFixedSizedAllocaFI(AllocaInst *AI) {
442 // Already computed this?
443 std::map<AllocaInst*, unsigned>::iterator I = AllocaMap.lower_bound(AI);
444 if (I != AllocaMap.end() && I->first == AI) return I->second;
446 const Type *Ty = AI->getAllocatedType();
447 ConstantUInt *CUI = cast<ConstantUInt>(AI->getArraySize());
448 unsigned TySize = TM.getTargetData().getTypeSize(Ty);
449 TySize *= CUI->getValue(); // Get total allocated size...
450 unsigned Alignment = TM.getTargetData().getTypeAlignment(Ty);
452 // Create a new stack object using the frame manager...
453 int FrameIdx = F->getFrameInfo()->CreateStackObject(TySize, Alignment);
454 AllocaMap.insert(I, std::make_pair(AI, FrameIdx));
459 /// copyConstantToRegister - Output the instructions required to put the
460 /// specified constant into the specified register.
462 void X86ISel::copyConstantToRegister(MachineBasicBlock *MBB,
463 MachineBasicBlock::iterator IP,
464 Constant *C, unsigned R) {
465 if (isa<UndefValue>(C)) {
466 switch (getClassB(C->getType())) {
468 // FIXME: SHOULD TEACH STACKIFIER ABOUT UNDEF VALUES!
469 BuildMI(*MBB, IP, X86::FLD0, 0, R);
472 BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, R+1);
475 BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, R);
478 } else if (ConstantExpr *CE = dyn_cast<ConstantExpr>(C)) {
480 switch (CE->getOpcode()) {
481 case Instruction::GetElementPtr:
482 emitGEPOperation(MBB, IP, CE->getOperand(0),
483 CE->op_begin()+1, CE->op_end(), R);
485 case Instruction::Cast:
486 emitCastOperation(MBB, IP, CE->getOperand(0), CE->getType(), R);
489 case Instruction::Xor: ++Class; // FALL THROUGH
490 case Instruction::Or: ++Class; // FALL THROUGH
491 case Instruction::And: ++Class; // FALL THROUGH
492 case Instruction::Sub: ++Class; // FALL THROUGH
493 case Instruction::Add:
494 emitSimpleBinaryOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
498 case Instruction::Mul:
499 emitMultiply(MBB, IP, CE->getOperand(0), CE->getOperand(1), R);
502 case Instruction::Div:
503 case Instruction::Rem:
504 emitDivRemOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
505 CE->getOpcode() == Instruction::Div, R);
508 case Instruction::SetNE:
509 case Instruction::SetEQ:
510 case Instruction::SetLT:
511 case Instruction::SetGT:
512 case Instruction::SetLE:
513 case Instruction::SetGE:
514 emitSetCCOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
518 case Instruction::Shl:
519 case Instruction::Shr:
520 emitShiftOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
521 CE->getOpcode() == Instruction::Shl, CE->getType(), R);
524 case Instruction::Select:
525 emitSelectOperation(MBB, IP, CE->getOperand(0), CE->getOperand(1),
526 CE->getOperand(2), R);
530 std::cerr << "Offending expr: " << *C << "\n";
531 assert(0 && "Constant expression not yet handled!\n");
535 if (C->getType()->isIntegral()) {
536 unsigned Class = getClassB(C->getType());
538 if (Class == cLong) {
539 // Copy the value into the register pair.
540 uint64_t Val = cast<ConstantInt>(C)->getRawValue();
541 BuildMI(*MBB, IP, X86::MOV32ri, 1, R).addImm(Val & 0xFFFFFFFF);
542 BuildMI(*MBB, IP, X86::MOV32ri, 1, R+1).addImm(Val >> 32);
546 assert(Class <= cInt && "Type not handled yet!");
548 static const unsigned IntegralOpcodeTab[] = {
549 X86::MOV8ri, X86::MOV16ri, X86::MOV32ri
552 if (C->getType() == Type::BoolTy) {
553 BuildMI(*MBB, IP, X86::MOV8ri, 1, R).addImm(C == ConstantBool::True);
555 ConstantInt *CI = cast<ConstantInt>(C);
556 BuildMI(*MBB, IP, IntegralOpcodeTab[Class],1,R).addImm(CI->getRawValue());
558 } else if (ConstantFP *CFP = dyn_cast<ConstantFP>(C)) {
559 if (CFP->isExactlyValue(+0.0))
560 BuildMI(*MBB, IP, X86::FLD0, 0, R);
561 else if (CFP->isExactlyValue(+1.0))
562 BuildMI(*MBB, IP, X86::FLD1, 0, R);
563 else if (CFP->isExactlyValue(-0.0)) {
564 unsigned Tmp = makeAnotherReg(Type::DoubleTy);
565 BuildMI(*MBB, IP, X86::FLD0, 0, Tmp);
566 BuildMI(*MBB, IP, X86::FCHS, 1, R).addReg(Tmp);
567 } else if (CFP->isExactlyValue(-1.0)) {
568 unsigned Tmp = makeAnotherReg(Type::DoubleTy);
569 BuildMI(*MBB, IP, X86::FLD1, 0, Tmp);
570 BuildMI(*MBB, IP, X86::FCHS, 1, R).addReg(Tmp);
571 } else { // FIXME: PI, other native values
572 // FIXME: 2*PI -> LDPI + FADD
574 // Otherwise we need to spill the constant to memory.
575 MachineConstantPool *CP = F->getConstantPool();
577 const Type *Ty = CFP->getType();
579 // If a FP immediate is precise when represented as a float, we put it
580 // into the constant pool as a float, even if it's is statically typed as
582 if (Ty == Type::DoubleTy)
583 if (CFP->isExactlyValue((float)CFP->getValue())) {
585 CFP = cast<ConstantFP>(ConstantExpr::getCast(CFP, Ty));
588 unsigned CPI = CP->getConstantPoolIndex(CFP);
590 assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
591 unsigned LoadOpcode = Ty == Type::FloatTy ? X86::FLD32m : X86::FLD64m;
592 addConstantPoolReference(BuildMI(*MBB, IP, LoadOpcode, 4, R), CPI);
595 } else if (isa<ConstantPointerNull>(C)) {
596 // Copy zero (null pointer) to the register.
597 BuildMI(*MBB, IP, X86::MOV32ri, 1, R).addImm(0);
598 } else if (GlobalValue *GV = dyn_cast<GlobalValue>(C)) {
599 BuildMI(*MBB, IP, X86::MOV32ri, 1, R).addGlobalAddress(GV);
601 std::cerr << "Offending constant: " << *C << "\n";
602 assert(0 && "Type not handled yet!");
606 /// LoadArgumentsToVirtualRegs - Load all of the arguments to this function from
607 /// the stack into virtual registers.
609 void X86ISel::LoadArgumentsToVirtualRegs(Function &Fn) {
610 // Emit instructions to load the arguments... On entry to a function on the
611 // X86, the stack frame looks like this:
613 // [ESP] -- return address
614 // [ESP + 4] -- first argument (leftmost lexically)
615 // [ESP + 8] -- second argument, if first argument is four bytes in size
618 unsigned ArgOffset = 0; // Frame mechanisms handle retaddr slot
619 MachineFrameInfo *MFI = F->getFrameInfo();
621 for (Function::aiterator I = Fn.abegin(), E = Fn.aend(); I != E; ++I) {
622 bool ArgLive = !I->use_empty();
623 unsigned Reg = ArgLive ? getReg(*I) : 0;
624 int FI; // Frame object index
626 switch (getClassB(I->getType())) {
629 FI = MFI->CreateFixedObject(1, ArgOffset);
630 addFrameReference(BuildMI(BB, X86::MOV8rm, 4, Reg), FI);
635 FI = MFI->CreateFixedObject(2, ArgOffset);
636 addFrameReference(BuildMI(BB, X86::MOV16rm, 4, Reg), FI);
641 FI = MFI->CreateFixedObject(4, ArgOffset);
642 addFrameReference(BuildMI(BB, X86::MOV32rm, 4, Reg), FI);
647 FI = MFI->CreateFixedObject(8, ArgOffset);
648 addFrameReference(BuildMI(BB, X86::MOV32rm, 4, Reg), FI);
649 addFrameReference(BuildMI(BB, X86::MOV32rm, 4, Reg+1), FI, 4);
651 ArgOffset += 4; // longs require 4 additional bytes
656 if (I->getType() == Type::FloatTy) {
657 Opcode = X86::FLD32m;
658 FI = MFI->CreateFixedObject(4, ArgOffset);
660 Opcode = X86::FLD64m;
661 FI = MFI->CreateFixedObject(8, ArgOffset);
663 addFrameReference(BuildMI(BB, Opcode, 4, Reg), FI);
665 if (I->getType() == Type::DoubleTy)
666 ArgOffset += 4; // doubles require 4 additional bytes
669 assert(0 && "Unhandled argument type!");
671 ArgOffset += 4; // Each argument takes at least 4 bytes on the stack...
674 // If the function takes variable number of arguments, add a frame offset for
675 // the start of the first vararg value... this is used to expand
677 if (Fn.getFunctionType()->isVarArg())
678 VarArgsFrameIndex = MFI->CreateFixedObject(1, ArgOffset);
681 /// EmitSpecialCodeForMain - Emit any code that needs to be executed only in
682 /// the main function.
683 void X86ISel::EmitSpecialCodeForMain() {
684 // Switch the FPU to 64-bit precision mode for better compatibility and speed.
685 int CWFrameIdx = F->getFrameInfo()->CreateStackObject(2, 2);
686 addFrameReference(BuildMI(BB, X86::FNSTCW16m, 4), CWFrameIdx);
688 // Set the high part to be 64-bit precision.
689 addFrameReference(BuildMI(BB, X86::MOV8mi, 5),
690 CWFrameIdx, 1).addImm(2);
692 // Reload the modified control word now.
693 addFrameReference(BuildMI(BB, X86::FLDCW16m, 4), CWFrameIdx);
696 /// SelectPHINodes - Insert machine code to generate phis. This is tricky
697 /// because we have to generate our sources into the source basic blocks, not
700 void X86ISel::SelectPHINodes() {
701 const TargetInstrInfo &TII = *TM.getInstrInfo();
702 const Function &LF = *F->getFunction(); // The LLVM function...
703 for (Function::const_iterator I = LF.begin(), E = LF.end(); I != E; ++I) {
704 const BasicBlock *BB = I;
705 MachineBasicBlock &MBB = *MBBMap[I];
707 // Loop over all of the PHI nodes in the LLVM basic block...
708 MachineBasicBlock::iterator PHIInsertPoint = MBB.begin();
709 for (BasicBlock::const_iterator I = BB->begin(); isa<PHINode>(I); ++I) {
710 PHINode *PN = const_cast<PHINode*>(dyn_cast<PHINode>(I));
712 // Create a new machine instr PHI node, and insert it.
713 unsigned PHIReg = getReg(*PN);
714 MachineInstr *PhiMI = BuildMI(MBB, PHIInsertPoint,
715 X86::PHI, PN->getNumOperands(), PHIReg);
717 MachineInstr *LongPhiMI = 0;
718 if (PN->getType() == Type::LongTy || PN->getType() == Type::ULongTy)
719 LongPhiMI = BuildMI(MBB, PHIInsertPoint,
720 X86::PHI, PN->getNumOperands(), PHIReg+1);
722 // PHIValues - Map of blocks to incoming virtual registers. We use this
723 // so that we only initialize one incoming value for a particular block,
724 // even if the block has multiple entries in the PHI node.
726 std::map<MachineBasicBlock*, unsigned> PHIValues;
728 for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
729 MachineBasicBlock *PredMBB = MBBMap[PN->getIncomingBlock(i)];
731 std::map<MachineBasicBlock*, unsigned>::iterator EntryIt =
732 PHIValues.lower_bound(PredMBB);
734 if (EntryIt != PHIValues.end() && EntryIt->first == PredMBB) {
735 // We already inserted an initialization of the register for this
736 // predecessor. Recycle it.
737 ValReg = EntryIt->second;
740 // Get the incoming value into a virtual register.
742 Value *Val = PN->getIncomingValue(i);
744 // If this is a constant or GlobalValue, we may have to insert code
745 // into the basic block to compute it into a virtual register.
746 if ((isa<Constant>(Val) && !isa<ConstantExpr>(Val))) {
747 // Simple constants get emitted at the end of the basic block,
748 // before any terminator instructions. We "know" that the code to
749 // move a constant into a register will never clobber any flags.
750 ValReg = getReg(Val, PredMBB, PredMBB->getFirstTerminator());
752 // Because we don't want to clobber any values which might be in
753 // physical registers with the computation of this constant (which
754 // might be arbitrarily complex if it is a constant expression),
755 // just insert the computation at the top of the basic block.
756 MachineBasicBlock::iterator PI = PredMBB->begin();
758 // Skip over any PHI nodes though!
759 while (PI != PredMBB->end() && PI->getOpcode() == X86::PHI)
762 ValReg = getReg(Val, PredMBB, PI);
765 // Remember that we inserted a value for this PHI for this predecessor
766 PHIValues.insert(EntryIt, std::make_pair(PredMBB, ValReg));
769 PhiMI->addRegOperand(ValReg);
770 PhiMI->addMachineBasicBlockOperand(PredMBB);
772 LongPhiMI->addRegOperand(ValReg+1);
773 LongPhiMI->addMachineBasicBlockOperand(PredMBB);
777 // Now that we emitted all of the incoming values for the PHI node, make
778 // sure to reposition the InsertPoint after the PHI that we just added.
779 // This is needed because we might have inserted a constant into this
780 // block, right after the PHI's which is before the old insert point!
781 PHIInsertPoint = LongPhiMI ? LongPhiMI : PhiMI;
787 /// RequiresFPRegKill - The floating point stackifier pass cannot insert
788 /// compensation code on critical edges. As such, it requires that we kill all
789 /// FP registers on the exit from any blocks that either ARE critical edges, or
790 /// branch to a block that has incoming critical edges.
792 /// Note that this kill instruction will eventually be eliminated when
793 /// restrictions in the stackifier are relaxed.
795 static bool RequiresFPRegKill(const MachineBasicBlock *MBB) {
797 const BasicBlock *BB = MBB->getBasicBlock ();
798 for (succ_const_iterator SI = succ_begin(BB), E = succ_end(BB); SI!=E; ++SI) {
799 const BasicBlock *Succ = *SI;
800 pred_const_iterator PI = pred_begin(Succ), PE = pred_end(Succ);
801 ++PI; // Block have at least one predecessory
802 if (PI != PE) { // If it has exactly one, this isn't crit edge
803 // If this block has more than one predecessor, check all of the
804 // predecessors to see if they have multiple successors. If so, then the
805 // block we are analyzing needs an FPRegKill.
806 for (PI = pred_begin(Succ); PI != PE; ++PI) {
807 const BasicBlock *Pred = *PI;
808 succ_const_iterator SI2 = succ_begin(Pred);
809 ++SI2; // There must be at least one successor of this block.
810 if (SI2 != succ_end(Pred))
811 return true; // Yes, we must insert the kill on this edge.
815 // If we got this far, there is no need to insert the kill instruction.
822 // InsertFPRegKills - Insert FP_REG_KILL instructions into basic blocks that
823 // need them. This only occurs due to the floating point stackifier not being
824 // aggressive enough to handle arbitrary global stackification.
826 // Currently we insert an FP_REG_KILL instruction into each block that uses or
827 // defines a floating point virtual register.
829 // When the global register allocators (like linear scan) finally update live
830 // variable analysis, we can keep floating point values in registers across
831 // portions of the CFG that do not involve critical edges. This will be a big
832 // win, but we are waiting on the global allocators before we can do this.
834 // With a bit of work, the floating point stackifier pass can be enhanced to
835 // break critical edges as needed (to make a place to put compensation code),
836 // but this will require some infrastructure improvements as well.
838 void X86ISel::InsertFPRegKills() {
839 SSARegMap &RegMap = *F->getSSARegMap();
841 for (MachineFunction::iterator BB = F->begin(), E = F->end(); BB != E; ++BB) {
842 for (MachineBasicBlock::iterator I = BB->begin(), E = BB->end(); I!=E; ++I)
843 for (unsigned i = 0, e = I->getNumOperands(); i != e; ++i) {
844 MachineOperand& MO = I->getOperand(i);
845 if (MO.isRegister() && MO.getReg()) {
846 unsigned Reg = MO.getReg();
847 if (MRegisterInfo::isVirtualRegister(Reg)) {
848 unsigned RegSize = RegMap.getRegClass(Reg)->getSize();
849 if (RegSize == 10 || RegSize == 8)
854 // If we haven't found an FP register use or def in this basic block, check
855 // to see if any of our successors has an FP PHI node, which will cause a
856 // copy to be inserted into this block.
857 for (MachineBasicBlock::const_succ_iterator SI = BB->succ_begin(),
858 SE = BB->succ_end(); SI != SE; ++SI) {
859 MachineBasicBlock *SBB = *SI;
860 for (MachineBasicBlock::iterator I = SBB->begin();
861 I != SBB->end() && I->getOpcode() == X86::PHI; ++I) {
862 const TargetRegisterClass *RC =
863 RegMap.getRegClass(I->getOperand(0).getReg());
864 if (RC->getSize() == 10 || RC->getSize() == 8)
870 // Okay, this block uses an FP register. If the block has successors (ie,
871 // it's not an unwind/return), insert the FP_REG_KILL instruction.
872 if (BB->succ_size() && RequiresFPRegKill(BB)) {
873 BuildMI(*BB, BB->getFirstTerminator(), X86::FP_REG_KILL, 0);
880 void X86ISel::getAddressingMode(Value *Addr, X86AddressMode &AM) {
881 AM.BaseType = X86AddressMode::RegBase;
882 AM.Base.Reg = 0; AM.Scale = 1; AM.IndexReg = 0; AM.Disp = 0;
883 if (GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(Addr)) {
884 if (isGEPFoldable(BB, GEP->getOperand(0), GEP->op_begin()+1, GEP->op_end(),
887 } else if (ConstantExpr *CE = dyn_cast<ConstantExpr>(Addr)) {
888 if (CE->getOpcode() == Instruction::GetElementPtr)
889 if (isGEPFoldable(BB, CE->getOperand(0), CE->op_begin()+1, CE->op_end(),
892 } else if (AllocaInst *AI = dyn_castFixedAlloca(Addr)) {
893 AM.BaseType = X86AddressMode::FrameIndexBase;
894 AM.Base.FrameIndex = getFixedSizedAllocaFI(AI);
896 } else if (GlobalValue *GV = dyn_cast<GlobalValue>(Addr)) {
901 // If it's not foldable, reset addr mode.
902 AM.BaseType = X86AddressMode::RegBase;
903 AM.Base.Reg = getReg(Addr);
904 AM.Scale = 1; AM.IndexReg = 0; AM.Disp = 0;
907 // canFoldSetCCIntoBranchOrSelect - Return the setcc instruction if we can fold
908 // it into the conditional branch or select instruction which is the only user
909 // of the cc instruction. This is the case if the conditional branch is the
910 // only user of the setcc. We also don't handle long arguments below, so we
911 // reject them here as well.
913 static SetCondInst *canFoldSetCCIntoBranchOrSelect(Value *V) {
914 if (SetCondInst *SCI = dyn_cast<SetCondInst>(V))
915 if (SCI->hasOneUse()) {
916 Instruction *User = cast<Instruction>(SCI->use_back());
917 if ((isa<BranchInst>(User) || isa<SelectInst>(User)) &&
918 (getClassB(SCI->getOperand(0)->getType()) != cLong ||
919 SCI->getOpcode() == Instruction::SetEQ ||
920 SCI->getOpcode() == Instruction::SetNE) &&
921 (isa<BranchInst>(User) || User->getOperand(0) == V))
927 // Return a fixed numbering for setcc instructions which does not depend on the
928 // order of the opcodes.
930 static unsigned getSetCCNumber(unsigned Opcode) {
932 default: assert(0 && "Unknown setcc instruction!");
933 case Instruction::SetEQ: return 0;
934 case Instruction::SetNE: return 1;
935 case Instruction::SetLT: return 2;
936 case Instruction::SetGE: return 3;
937 case Instruction::SetGT: return 4;
938 case Instruction::SetLE: return 5;
942 // LLVM -> X86 signed X86 unsigned
943 // ----- ---------- ------------
944 // seteq -> sete sete
945 // setne -> setne setne
946 // setlt -> setl setb
947 // setge -> setge setae
948 // setgt -> setg seta
949 // setle -> setle setbe
951 // sets // Used by comparison with 0 optimization
953 static const unsigned SetCCOpcodeTab[2][8] = {
954 { X86::SETEr, X86::SETNEr, X86::SETBr, X86::SETAEr, X86::SETAr, X86::SETBEr,
956 { X86::SETEr, X86::SETNEr, X86::SETLr, X86::SETGEr, X86::SETGr, X86::SETLEr,
957 X86::SETSr, X86::SETNSr },
960 /// emitUCOMr - In the future when we support processors before the P6, this
961 /// wraps the logic for emitting an FUCOMr vs FUCOMIr.
962 void X86ISel::emitUCOMr(MachineBasicBlock *MBB, MachineBasicBlock::iterator IP,
963 unsigned LHS, unsigned RHS) {
964 if (0) { // for processors prior to the P6
965 BuildMI(*MBB, IP, X86::FUCOMr, 2).addReg(LHS).addReg(RHS);
966 BuildMI(*MBB, IP, X86::FNSTSW8r, 0);
967 BuildMI(*MBB, IP, X86::SAHF, 1);
969 BuildMI(*MBB, IP, X86::FUCOMIr, 2).addReg(LHS).addReg(RHS);
973 // EmitComparison - This function emits a comparison of the two operands,
974 // returning the extended setcc code to use.
975 unsigned X86ISel::EmitComparison(unsigned OpNum, Value *Op0, Value *Op1,
976 MachineBasicBlock *MBB,
977 MachineBasicBlock::iterator IP) {
978 // The arguments are already supposed to be of the same type.
979 const Type *CompTy = Op0->getType();
980 unsigned Class = getClassB(CompTy);
982 // Special case handling of: cmp R, i
983 if (isa<ConstantPointerNull>(Op1)) {
984 unsigned Op0r = getReg(Op0, MBB, IP);
985 if (OpNum < 2) // seteq/setne -> test
986 BuildMI(*MBB, IP, X86::TEST32rr, 2).addReg(Op0r).addReg(Op0r);
988 BuildMI(*MBB, IP, X86::CMP32ri, 2).addReg(Op0r).addImm(0);
991 } else if (ConstantInt *CI = dyn_cast<ConstantInt>(Op1)) {
992 if (Class == cByte || Class == cShort || Class == cInt) {
993 unsigned Op1v = CI->getRawValue();
995 // Mask off any upper bits of the constant, if there are any...
996 Op1v &= (1ULL << (8 << Class)) - 1;
998 // If this is a comparison against zero, emit more efficient code. We
999 // can't handle unsigned comparisons against zero unless they are == or
1000 // !=. These should have been strength reduced already anyway.
1001 if (Op1v == 0 && (CompTy->isSigned() || OpNum < 2)) {
1003 // If this is a comparison against zero and the LHS is an and of a
1004 // register with a constant, use the test to do the and.
1005 if (Instruction *Op0I = dyn_cast<Instruction>(Op0))
1006 if (Op0I->getOpcode() == Instruction::And && Op0->hasOneUse() &&
1007 isa<ConstantInt>(Op0I->getOperand(1))) {
1008 static const unsigned TESTTab[] = {
1009 X86::TEST8ri, X86::TEST16ri, X86::TEST32ri
1013 unsigned LHS = getReg(Op0I->getOperand(0), MBB, IP);
1015 cast<ConstantInt>(Op0I->getOperand(1))->getRawValue();
1016 BuildMI(*MBB, IP, TESTTab[Class], 2).addReg(LHS).addImm(Imm);
1018 if (OpNum == 2) return 6; // Map jl -> js
1019 if (OpNum == 3) return 7; // Map jg -> jns
1023 unsigned Op0r = getReg(Op0, MBB, IP);
1024 static const unsigned TESTTab[] = {
1025 X86::TEST8rr, X86::TEST16rr, X86::TEST32rr
1027 BuildMI(*MBB, IP, TESTTab[Class], 2).addReg(Op0r).addReg(Op0r);
1029 if (OpNum == 2) return 6; // Map jl -> js
1030 if (OpNum == 3) return 7; // Map jg -> jns
1034 static const unsigned CMPTab[] = {
1035 X86::CMP8ri, X86::CMP16ri, X86::CMP32ri
1038 unsigned Op0r = getReg(Op0, MBB, IP);
1039 BuildMI(*MBB, IP, CMPTab[Class], 2).addReg(Op0r).addImm(Op1v);
1042 unsigned Op0r = getReg(Op0, MBB, IP);
1043 assert(Class == cLong && "Unknown integer class!");
1044 unsigned LowCst = CI->getRawValue();
1045 unsigned HiCst = CI->getRawValue() >> 32;
1046 if (OpNum < 2) { // seteq, setne
1047 unsigned LoTmp = Op0r;
1049 LoTmp = makeAnotherReg(Type::IntTy);
1050 BuildMI(*MBB, IP, X86::XOR32ri, 2, LoTmp).addReg(Op0r).addImm(LowCst);
1052 unsigned HiTmp = Op0r+1;
1054 HiTmp = makeAnotherReg(Type::IntTy);
1055 BuildMI(*MBB, IP, X86::XOR32ri, 2,HiTmp).addReg(Op0r+1).addImm(HiCst);
1057 unsigned FinalTmp = makeAnotherReg(Type::IntTy);
1058 BuildMI(*MBB, IP, X86::OR32rr, 2, FinalTmp).addReg(LoTmp).addReg(HiTmp);
1061 // Emit a sequence of code which compares the high and low parts once
1062 // each, then uses a conditional move to handle the overflow case. For
1063 // example, a setlt for long would generate code like this:
1065 // AL = lo(op1) < lo(op2) // Always unsigned comparison
1066 // BL = hi(op1) < hi(op2) // Signedness depends on operands
1067 // dest = hi(op1) == hi(op2) ? BL : AL;
1070 // FIXME: This would be much better if we had hierarchical register
1071 // classes! Until then, hardcode registers so that we can deal with
1072 // their aliases (because we don't have conditional byte moves).
1074 BuildMI(*MBB, IP, X86::CMP32ri, 2).addReg(Op0r).addImm(LowCst);
1075 BuildMI(*MBB, IP, SetCCOpcodeTab[0][OpNum], 0, X86::AL);
1076 BuildMI(*MBB, IP, X86::CMP32ri, 2).addReg(Op0r+1).addImm(HiCst);
1077 BuildMI(*MBB, IP, SetCCOpcodeTab[CompTy->isSigned()][OpNum], 0,X86::BL);
1078 BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, X86::BH);
1079 BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, X86::AH);
1080 BuildMI(*MBB, IP, X86::CMOVE16rr, 2, X86::BX).addReg(X86::BX)
1082 // NOTE: visitSetCondInst knows that the value is dumped into the BL
1083 // register at this point for long values...
1089 unsigned Op0r = getReg(Op0, MBB, IP);
1091 // Special case handling of comparison against +/- 0.0
1092 if (ConstantFP *CFP = dyn_cast<ConstantFP>(Op1))
1093 if (CFP->isExactlyValue(+0.0) || CFP->isExactlyValue(-0.0)) {
1094 BuildMI(*MBB, IP, X86::FTST, 1).addReg(Op0r);
1095 BuildMI(*MBB, IP, X86::FNSTSW8r, 0);
1096 BuildMI(*MBB, IP, X86::SAHF, 1);
1100 unsigned Op1r = getReg(Op1, MBB, IP);
1102 default: assert(0 && "Unknown type class!");
1103 // Emit: cmp <var1>, <var2> (do the comparison). We can
1104 // compare 8-bit with 8-bit, 16-bit with 16-bit, 32-bit with
1107 BuildMI(*MBB, IP, X86::CMP8rr, 2).addReg(Op0r).addReg(Op1r);
1110 BuildMI(*MBB, IP, X86::CMP16rr, 2).addReg(Op0r).addReg(Op1r);
1113 BuildMI(*MBB, IP, X86::CMP32rr, 2).addReg(Op0r).addReg(Op1r);
1116 emitUCOMr(MBB, IP, Op0r, Op1r);
1120 if (OpNum < 2) { // seteq, setne
1121 unsigned LoTmp = makeAnotherReg(Type::IntTy);
1122 unsigned HiTmp = makeAnotherReg(Type::IntTy);
1123 unsigned FinalTmp = makeAnotherReg(Type::IntTy);
1124 BuildMI(*MBB, IP, X86::XOR32rr, 2, LoTmp).addReg(Op0r).addReg(Op1r);
1125 BuildMI(*MBB, IP, X86::XOR32rr, 2, HiTmp).addReg(Op0r+1).addReg(Op1r+1);
1126 BuildMI(*MBB, IP, X86::OR32rr, 2, FinalTmp).addReg(LoTmp).addReg(HiTmp);
1127 break; // Allow the sete or setne to be generated from flags set by OR
1129 // Emit a sequence of code which compares the high and low parts once
1130 // each, then uses a conditional move to handle the overflow case. For
1131 // example, a setlt for long would generate code like this:
1133 // AL = lo(op1) < lo(op2) // Signedness depends on operands
1134 // BL = hi(op1) < hi(op2) // Always unsigned comparison
1135 // dest = hi(op1) == hi(op2) ? BL : AL;
1138 // FIXME: This would be much better if we had hierarchical register
1139 // classes! Until then, hardcode registers so that we can deal with their
1140 // aliases (because we don't have conditional byte moves).
1142 BuildMI(*MBB, IP, X86::CMP32rr, 2).addReg(Op0r).addReg(Op1r);
1143 BuildMI(*MBB, IP, SetCCOpcodeTab[0][OpNum], 0, X86::AL);
1144 BuildMI(*MBB, IP, X86::CMP32rr, 2).addReg(Op0r+1).addReg(Op1r+1);
1145 BuildMI(*MBB, IP, SetCCOpcodeTab[CompTy->isSigned()][OpNum], 0, X86::BL);
1146 BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, X86::BH);
1147 BuildMI(*MBB, IP, X86::IMPLICIT_DEF, 0, X86::AH);
1148 BuildMI(*MBB, IP, X86::CMOVE16rr, 2, X86::BX).addReg(X86::BX)
1150 // NOTE: visitSetCondInst knows that the value is dumped into the BL
1151 // register at this point for long values...
1158 /// SetCC instructions - Here we just emit boilerplate code to set a byte-sized
1159 /// register, then move it to wherever the result should be.
1161 void X86ISel::visitSetCondInst(SetCondInst &I) {
1162 if (canFoldSetCCIntoBranchOrSelect(&I))
1163 return; // Fold this into a branch or select.
1165 unsigned DestReg = getReg(I);
1166 MachineBasicBlock::iterator MII = BB->end();
1167 emitSetCCOperation(BB, MII, I.getOperand(0), I.getOperand(1), I.getOpcode(),
1171 /// emitSetCCOperation - Common code shared between visitSetCondInst and
1172 /// constant expression support.
1174 void X86ISel::emitSetCCOperation(MachineBasicBlock *MBB,
1175 MachineBasicBlock::iterator IP,
1176 Value *Op0, Value *Op1, unsigned Opcode,
1177 unsigned TargetReg) {
1178 unsigned OpNum = getSetCCNumber(Opcode);
1179 OpNum = EmitComparison(OpNum, Op0, Op1, MBB, IP);
1181 const Type *CompTy = Op0->getType();
1182 unsigned CompClass = getClassB(CompTy);
1183 bool isSigned = CompTy->isSigned() && CompClass != cFP;
1185 if (CompClass != cLong || OpNum < 2) {
1186 // Handle normal comparisons with a setcc instruction...
1187 BuildMI(*MBB, IP, SetCCOpcodeTab[isSigned][OpNum], 0, TargetReg);
1189 // Handle long comparisons by copying the value which is already in BL into
1190 // the register we want...
1191 BuildMI(*MBB, IP, X86::MOV8rr, 1, TargetReg).addReg(X86::BL);
1195 void X86ISel::visitSelectInst(SelectInst &SI) {
1196 unsigned DestReg = getReg(SI);
1197 MachineBasicBlock::iterator MII = BB->end();
1198 emitSelectOperation(BB, MII, SI.getCondition(), SI.getTrueValue(),
1199 SI.getFalseValue(), DestReg);
1202 /// emitSelect - Common code shared between visitSelectInst and the constant
1203 /// expression support.
1204 void X86ISel::emitSelectOperation(MachineBasicBlock *MBB,
1205 MachineBasicBlock::iterator IP,
1206 Value *Cond, Value *TrueVal, Value *FalseVal,
1208 unsigned SelectClass = getClassB(TrueVal->getType());
1210 // We don't support 8-bit conditional moves. If we have incoming constants,
1211 // transform them into 16-bit constants to avoid having a run-time conversion.
1212 if (SelectClass == cByte) {
1213 if (Constant *T = dyn_cast<Constant>(TrueVal))
1214 TrueVal = ConstantExpr::getCast(T, Type::ShortTy);
1215 if (Constant *F = dyn_cast<Constant>(FalseVal))
1216 FalseVal = ConstantExpr::getCast(F, Type::ShortTy);
1219 unsigned TrueReg = getReg(TrueVal, MBB, IP);
1220 unsigned FalseReg = getReg(FalseVal, MBB, IP);
1221 if (TrueReg == FalseReg) {
1222 static const unsigned Opcode[] = {
1223 X86::MOV8rr, X86::MOV16rr, X86::MOV32rr, X86::FpMOV, X86::MOV32rr
1225 BuildMI(*MBB, IP, Opcode[SelectClass], 1, DestReg).addReg(TrueReg);
1226 if (SelectClass == cLong)
1227 BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg+1).addReg(TrueReg+1);
1232 if (SetCondInst *SCI = canFoldSetCCIntoBranchOrSelect(Cond)) {
1233 // We successfully folded the setcc into the select instruction.
1235 unsigned OpNum = getSetCCNumber(SCI->getOpcode());
1236 OpNum = EmitComparison(OpNum, SCI->getOperand(0), SCI->getOperand(1), MBB,
1239 const Type *CompTy = SCI->getOperand(0)->getType();
1240 bool isSigned = CompTy->isSigned() && getClassB(CompTy) != cFP;
1242 // LLVM -> X86 signed X86 unsigned
1243 // ----- ---------- ------------
1244 // seteq -> cmovNE cmovNE
1245 // setne -> cmovE cmovE
1246 // setlt -> cmovGE cmovAE
1247 // setge -> cmovL cmovB
1248 // setgt -> cmovLE cmovBE
1249 // setle -> cmovG cmovA
1251 // cmovNS // Used by comparison with 0 optimization
1254 switch (SelectClass) {
1255 default: assert(0 && "Unknown value class!");
1257 // Annoyingly, we don't have a full set of floating point conditional
1259 static const unsigned OpcodeTab[2][8] = {
1260 { X86::FCMOVNE, X86::FCMOVE, X86::FCMOVAE, X86::FCMOVB,
1261 X86::FCMOVBE, X86::FCMOVA, 0, 0 },
1262 { X86::FCMOVNE, X86::FCMOVE, 0, 0, 0, 0, 0, 0 },
1264 Opcode = OpcodeTab[isSigned][OpNum];
1266 // If opcode == 0, we hit a case that we don't support. Output a setcc
1267 // and compare the result against zero.
1269 unsigned CompClass = getClassB(CompTy);
1271 if (CompClass != cLong || OpNum < 2) {
1272 CondReg = makeAnotherReg(Type::BoolTy);
1273 // Handle normal comparisons with a setcc instruction...
1274 BuildMI(*MBB, IP, SetCCOpcodeTab[isSigned][OpNum], 0, CondReg);
1276 // Long comparisons end up in the BL register.
1280 BuildMI(*MBB, IP, X86::TEST8rr, 2).addReg(CondReg).addReg(CondReg);
1281 Opcode = X86::FCMOVE;
1287 static const unsigned OpcodeTab[2][8] = {
1288 { X86::CMOVNE16rr, X86::CMOVE16rr, X86::CMOVAE16rr, X86::CMOVB16rr,
1289 X86::CMOVBE16rr, X86::CMOVA16rr, 0, 0 },
1290 { X86::CMOVNE16rr, X86::CMOVE16rr, X86::CMOVGE16rr, X86::CMOVL16rr,
1291 X86::CMOVLE16rr, X86::CMOVG16rr, X86::CMOVNS16rr, X86::CMOVS16rr },
1293 Opcode = OpcodeTab[isSigned][OpNum];
1298 static const unsigned OpcodeTab[2][8] = {
1299 { X86::CMOVNE32rr, X86::CMOVE32rr, X86::CMOVAE32rr, X86::CMOVB32rr,
1300 X86::CMOVBE32rr, X86::CMOVA32rr, 0, 0 },
1301 { X86::CMOVNE32rr, X86::CMOVE32rr, X86::CMOVGE32rr, X86::CMOVL32rr,
1302 X86::CMOVLE32rr, X86::CMOVG32rr, X86::CMOVNS32rr, X86::CMOVS32rr },
1304 Opcode = OpcodeTab[isSigned][OpNum];
1309 // Get the value being branched on, and use it to set the condition codes.
1310 unsigned CondReg = getReg(Cond, MBB, IP);
1311 BuildMI(*MBB, IP, X86::TEST8rr, 2).addReg(CondReg).addReg(CondReg);
1312 switch (SelectClass) {
1313 default: assert(0 && "Unknown value class!");
1314 case cFP: Opcode = X86::FCMOVE; break;
1316 case cShort: Opcode = X86::CMOVE16rr; break;
1318 case cLong: Opcode = X86::CMOVE32rr; break;
1322 unsigned RealDestReg = DestReg;
1325 // Annoyingly enough, X86 doesn't HAVE 8-bit conditional moves. Because of
1326 // this, we have to promote the incoming values to 16 bits, perform a 16-bit
1327 // cmove, then truncate the result.
1328 if (SelectClass == cByte) {
1329 DestReg = makeAnotherReg(Type::ShortTy);
1330 if (getClassB(TrueVal->getType()) == cByte) {
1331 // Promote the true value, by storing it into AL, and reading from AX.
1332 BuildMI(*MBB, IP, X86::MOV8rr, 1, X86::AL).addReg(TrueReg);
1333 BuildMI(*MBB, IP, X86::MOV8ri, 1, X86::AH).addImm(0);
1334 TrueReg = makeAnotherReg(Type::ShortTy);
1335 BuildMI(*MBB, IP, X86::MOV16rr, 1, TrueReg).addReg(X86::AX);
1337 if (getClassB(FalseVal->getType()) == cByte) {
1338 // Promote the true value, by storing it into CL, and reading from CX.
1339 BuildMI(*MBB, IP, X86::MOV8rr, 1, X86::CL).addReg(FalseReg);
1340 BuildMI(*MBB, IP, X86::MOV8ri, 1, X86::CH).addImm(0);
1341 FalseReg = makeAnotherReg(Type::ShortTy);
1342 BuildMI(*MBB, IP, X86::MOV16rr, 1, FalseReg).addReg(X86::CX);
1346 BuildMI(*MBB, IP, Opcode, 2, DestReg).addReg(TrueReg).addReg(FalseReg);
1348 switch (SelectClass) {
1350 // We did the computation with 16-bit registers. Truncate back to our
1351 // result by copying into AX then copying out AL.
1352 BuildMI(*MBB, IP, X86::MOV16rr, 1, X86::AX).addReg(DestReg);
1353 BuildMI(*MBB, IP, X86::MOV8rr, 1, RealDestReg).addReg(X86::AL);
1356 // Move the upper half of the value as well.
1357 BuildMI(*MBB, IP, Opcode, 2,DestReg+1).addReg(TrueReg+1).addReg(FalseReg+1);
1364 /// promote32 - Emit instructions to turn a narrow operand into a 32-bit-wide
1365 /// operand, in the specified target register.
1367 void X86ISel::promote32(unsigned targetReg, const ValueRecord &VR) {
1368 bool isUnsigned = VR.Ty->isUnsigned() || VR.Ty == Type::BoolTy;
1370 Value *Val = VR.Val;
1371 const Type *Ty = VR.Ty;
1373 if (Constant *C = dyn_cast<Constant>(Val)) {
1374 Val = ConstantExpr::getCast(C, Type::IntTy);
1378 // If this is a simple constant, just emit a MOVri directly to avoid the
1380 if (ConstantInt *CI = dyn_cast<ConstantInt>(Val)) {
1381 int TheVal = CI->getRawValue() & 0xFFFFFFFF;
1382 BuildMI(BB, X86::MOV32ri, 1, targetReg).addImm(TheVal);
1387 // Make sure we have the register number for this value...
1388 unsigned Reg = Val ? getReg(Val) : VR.Reg;
1390 switch (getClassB(Ty)) {
1392 // Extend value into target register (8->32)
1394 BuildMI(BB, X86::MOVZX32rr8, 1, targetReg).addReg(Reg);
1396 BuildMI(BB, X86::MOVSX32rr8, 1, targetReg).addReg(Reg);
1399 // Extend value into target register (16->32)
1401 BuildMI(BB, X86::MOVZX32rr16, 1, targetReg).addReg(Reg);
1403 BuildMI(BB, X86::MOVSX32rr16, 1, targetReg).addReg(Reg);
1406 // Move value into target register (32->32)
1407 BuildMI(BB, X86::MOV32rr, 1, targetReg).addReg(Reg);
1410 assert(0 && "Unpromotable operand class in promote32");
1414 /// 'ret' instruction - Here we are interested in meeting the x86 ABI. As such,
1415 /// we have the following possibilities:
1417 /// ret void: No return value, simply emit a 'ret' instruction
1418 /// ret sbyte, ubyte : Extend value into EAX and return
1419 /// ret short, ushort: Extend value into EAX and return
1420 /// ret int, uint : Move value into EAX and return
1421 /// ret pointer : Move value into EAX and return
1422 /// ret long, ulong : Move value into EAX/EDX and return
1423 /// ret float/double : Top of FP stack
1425 void X86ISel::visitReturnInst(ReturnInst &I) {
1426 if (I.getNumOperands() == 0) {
1427 BuildMI(BB, X86::RET, 0); // Just emit a 'ret' instruction
1431 Value *RetVal = I.getOperand(0);
1432 switch (getClassB(RetVal->getType())) {
1433 case cByte: // integral return values: extend or move into EAX and return
1436 promote32(X86::EAX, ValueRecord(RetVal));
1437 // Declare that EAX is live on exit
1438 BuildMI(BB, X86::IMPLICIT_USE, 2).addReg(X86::EAX).addReg(X86::ESP);
1440 case cFP: { // Floats & Doubles: Return in ST(0)
1441 unsigned RetReg = getReg(RetVal);
1442 BuildMI(BB, X86::FpSETRESULT, 1).addReg(RetReg);
1443 // Declare that top-of-stack is live on exit
1444 BuildMI(BB, X86::IMPLICIT_USE, 2).addReg(X86::ST0).addReg(X86::ESP);
1448 unsigned RetReg = getReg(RetVal);
1449 BuildMI(BB, X86::MOV32rr, 1, X86::EAX).addReg(RetReg);
1450 BuildMI(BB, X86::MOV32rr, 1, X86::EDX).addReg(RetReg+1);
1451 // Declare that EAX & EDX are live on exit
1452 BuildMI(BB, X86::IMPLICIT_USE, 3).addReg(X86::EAX).addReg(X86::EDX)
1457 visitInstruction(I);
1459 // Emit a 'ret' instruction
1460 BuildMI(BB, X86::RET, 0);
1463 // getBlockAfter - Return the basic block which occurs lexically after the
1465 static inline BasicBlock *getBlockAfter(BasicBlock *BB) {
1466 Function::iterator I = BB; ++I; // Get iterator to next block
1467 return I != BB->getParent()->end() ? &*I : 0;
1470 /// visitBranchInst - Handle conditional and unconditional branches here. Note
1471 /// that since code layout is frozen at this point, that if we are trying to
1472 /// jump to a block that is the immediate successor of the current block, we can
1473 /// just make a fall-through (but we don't currently).
1475 void X86ISel::visitBranchInst(BranchInst &BI) {
1476 // Update machine-CFG edges
1477 BB->addSuccessor (MBBMap[BI.getSuccessor(0)]);
1478 if (BI.isConditional())
1479 BB->addSuccessor (MBBMap[BI.getSuccessor(1)]);
1481 BasicBlock *NextBB = getBlockAfter(BI.getParent()); // BB after current one
1483 if (!BI.isConditional()) { // Unconditional branch?
1484 if (BI.getSuccessor(0) != NextBB)
1485 BuildMI(BB, X86::JMP, 1).addMBB(MBBMap[BI.getSuccessor(0)]);
1489 // See if we can fold the setcc into the branch itself...
1490 SetCondInst *SCI = canFoldSetCCIntoBranchOrSelect(BI.getCondition());
1492 // Nope, cannot fold setcc into this branch. Emit a branch on a condition
1493 // computed some other way...
1494 unsigned condReg = getReg(BI.getCondition());
1495 BuildMI(BB, X86::TEST8rr, 2).addReg(condReg).addReg(condReg);
1496 if (BI.getSuccessor(1) == NextBB) {
1497 if (BI.getSuccessor(0) != NextBB)
1498 BuildMI(BB, X86::JNE, 1).addMBB(MBBMap[BI.getSuccessor(0)]);
1500 BuildMI(BB, X86::JE, 1).addMBB(MBBMap[BI.getSuccessor(1)]);
1502 if (BI.getSuccessor(0) != NextBB)
1503 BuildMI(BB, X86::JMP, 1).addMBB(MBBMap[BI.getSuccessor(0)]);
1508 unsigned OpNum = getSetCCNumber(SCI->getOpcode());
1509 MachineBasicBlock::iterator MII = BB->end();
1510 OpNum = EmitComparison(OpNum, SCI->getOperand(0), SCI->getOperand(1), BB,MII);
1512 const Type *CompTy = SCI->getOperand(0)->getType();
1513 bool isSigned = CompTy->isSigned() && getClassB(CompTy) != cFP;
1516 // LLVM -> X86 signed X86 unsigned
1517 // ----- ---------- ------------
1525 // js // Used by comparison with 0 optimization
1528 static const unsigned OpcodeTab[2][8] = {
1529 { X86::JE, X86::JNE, X86::JB, X86::JAE, X86::JA, X86::JBE, 0, 0 },
1530 { X86::JE, X86::JNE, X86::JL, X86::JGE, X86::JG, X86::JLE,
1531 X86::JS, X86::JNS },
1534 if (BI.getSuccessor(0) != NextBB) {
1535 BuildMI(BB, OpcodeTab[isSigned][OpNum], 1)
1536 .addMBB(MBBMap[BI.getSuccessor(0)]);
1537 if (BI.getSuccessor(1) != NextBB)
1538 BuildMI(BB, X86::JMP, 1).addMBB(MBBMap[BI.getSuccessor(1)]);
1540 // Change to the inverse condition...
1541 if (BI.getSuccessor(1) != NextBB) {
1543 BuildMI(BB, OpcodeTab[isSigned][OpNum], 1)
1544 .addMBB(MBBMap[BI.getSuccessor(1)]);
1550 /// doCall - This emits an abstract call instruction, setting up the arguments
1551 /// and the return value as appropriate. For the actual function call itself,
1552 /// it inserts the specified CallMI instruction into the stream.
1554 void X86ISel::doCall(const ValueRecord &Ret, MachineInstr *CallMI,
1555 const std::vector<ValueRecord> &Args) {
1556 // Count how many bytes are to be pushed on the stack...
1557 unsigned NumBytes = 0;
1559 if (!Args.empty()) {
1560 for (unsigned i = 0, e = Args.size(); i != e; ++i)
1561 switch (getClassB(Args[i].Ty)) {
1562 case cByte: case cShort: case cInt:
1563 NumBytes += 4; break;
1565 NumBytes += 8; break;
1567 NumBytes += Args[i].Ty == Type::FloatTy ? 4 : 8;
1569 default: assert(0 && "Unknown class!");
1572 // Adjust the stack pointer for the new arguments...
1573 BuildMI(BB, X86::ADJCALLSTACKDOWN, 1).addImm(NumBytes);
1575 // Arguments go on the stack in reverse order, as specified by the ABI.
1576 unsigned ArgOffset = 0;
1577 for (unsigned i = 0, e = Args.size(); i != e; ++i) {
1579 switch (getClassB(Args[i].Ty)) {
1581 if (Args[i].Val && isa<ConstantBool>(Args[i].Val)) {
1582 addRegOffset(BuildMI(BB, X86::MOV32mi, 5), X86::ESP, ArgOffset)
1583 .addImm(Args[i].Val == ConstantBool::True);
1588 if (Args[i].Val && isa<ConstantInt>(Args[i].Val)) {
1589 // Zero/Sign extend constant, then stuff into memory.
1590 ConstantInt *Val = cast<ConstantInt>(Args[i].Val);
1591 Val = cast<ConstantInt>(ConstantExpr::getCast(Val, Type::IntTy));
1592 addRegOffset(BuildMI(BB, X86::MOV32mi, 5), X86::ESP, ArgOffset)
1593 .addImm(Val->getRawValue() & 0xFFFFFFFF);
1595 // Promote arg to 32 bits wide into a temporary register...
1596 ArgReg = makeAnotherReg(Type::UIntTy);
1597 promote32(ArgReg, Args[i]);
1598 addRegOffset(BuildMI(BB, X86::MOV32mr, 5),
1599 X86::ESP, ArgOffset).addReg(ArgReg);
1603 if (Args[i].Val && isa<ConstantInt>(Args[i].Val)) {
1604 unsigned Val = cast<ConstantInt>(Args[i].Val)->getRawValue();
1605 addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
1606 X86::ESP, ArgOffset).addImm(Val);
1607 } else if (Args[i].Val && isa<ConstantPointerNull>(Args[i].Val)) {
1608 addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
1609 X86::ESP, ArgOffset).addImm(0);
1611 ArgReg = Args[i].Val ? getReg(Args[i].Val) : Args[i].Reg;
1612 addRegOffset(BuildMI(BB, X86::MOV32mr, 5),
1613 X86::ESP, ArgOffset).addReg(ArgReg);
1617 if (Args[i].Val && isa<ConstantInt>(Args[i].Val)) {
1618 uint64_t Val = cast<ConstantInt>(Args[i].Val)->getRawValue();
1619 addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
1620 X86::ESP, ArgOffset).addImm(Val & ~0U);
1621 addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
1622 X86::ESP, ArgOffset+4).addImm(Val >> 32ULL);
1624 ArgReg = Args[i].Val ? getReg(Args[i].Val) : Args[i].Reg;
1625 addRegOffset(BuildMI(BB, X86::MOV32mr, 5),
1626 X86::ESP, ArgOffset).addReg(ArgReg);
1627 addRegOffset(BuildMI(BB, X86::MOV32mr, 5),
1628 X86::ESP, ArgOffset+4).addReg(ArgReg+1);
1630 ArgOffset += 4; // 8 byte entry, not 4.
1634 if (ConstantFP *CFP = dyn_cast_or_null<ConstantFP>(Args[i].Val)) {
1635 // Store constant FP values with integer instructions to avoid having
1636 // to load the constants from the constant pool then do a store.
1637 if (CFP->getType() == Type::FloatTy) {
1642 V.F = CFP->getValue();
1643 addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
1644 X86::ESP, ArgOffset).addImm(V.I);
1650 V.F = CFP->getValue();
1651 addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
1652 X86::ESP, ArgOffset).addImm((unsigned)V.I);
1653 addRegOffset(BuildMI(BB, X86::MOV32mi, 5),
1654 X86::ESP, ArgOffset+4).addImm(unsigned(V.I >> 32));
1655 ArgOffset += 4; // 8 byte entry, not 4.
1658 ArgReg = Args[i].Val ? getReg(Args[i].Val) : Args[i].Reg;
1659 if (Args[i].Ty == Type::FloatTy) {
1660 addRegOffset(BuildMI(BB, X86::FST32m, 5),
1661 X86::ESP, ArgOffset).addReg(ArgReg);
1663 assert(Args[i].Ty == Type::DoubleTy && "Unknown FP type!");
1664 addRegOffset(BuildMI(BB, X86::FST64m, 5),
1665 X86::ESP, ArgOffset).addReg(ArgReg);
1666 ArgOffset += 4; // 8 byte entry, not 4.
1671 default: assert(0 && "Unknown class!");
1676 BuildMI(BB, X86::ADJCALLSTACKDOWN, 1).addImm(0);
1679 BB->push_back(CallMI);
1681 BuildMI(BB, X86::ADJCALLSTACKUP, 1).addImm(NumBytes);
1683 // If there is a return value, scavenge the result from the location the call
1686 if (Ret.Ty != Type::VoidTy) {
1687 unsigned DestClass = getClassB(Ret.Ty);
1688 switch (DestClass) {
1692 // Integral results are in %eax, or the appropriate portion
1694 static const unsigned regRegMove[] = {
1695 X86::MOV8rr, X86::MOV16rr, X86::MOV32rr
1697 static const unsigned AReg[] = { X86::AL, X86::AX, X86::EAX };
1698 BuildMI(BB, regRegMove[DestClass], 1, Ret.Reg).addReg(AReg[DestClass]);
1701 case cFP: // Floating-point return values live in %ST(0)
1702 BuildMI(BB, X86::FpGETRESULT, 1, Ret.Reg);
1704 case cLong: // Long values are left in EDX:EAX
1705 BuildMI(BB, X86::MOV32rr, 1, Ret.Reg).addReg(X86::EAX);
1706 BuildMI(BB, X86::MOV32rr, 1, Ret.Reg+1).addReg(X86::EDX);
1708 default: assert(0 && "Unknown class!");
1714 /// visitCallInst - Push args on stack and do a procedure call instruction.
1715 void X86ISel::visitCallInst(CallInst &CI) {
1716 MachineInstr *TheCall;
1717 if (Function *F = CI.getCalledFunction()) {
1718 // Is it an intrinsic function call?
1719 if (Intrinsic::ID ID = (Intrinsic::ID)F->getIntrinsicID()) {
1720 visitIntrinsicCall(ID, CI); // Special intrinsics are not handled here
1724 // Emit a CALL instruction with PC-relative displacement.
1725 TheCall = BuildMI(X86::CALLpcrel32, 1).addGlobalAddress(F, true);
1726 } else { // Emit an indirect call...
1727 unsigned Reg = getReg(CI.getCalledValue());
1728 TheCall = BuildMI(X86::CALL32r, 1).addReg(Reg);
1731 std::vector<ValueRecord> Args;
1732 for (unsigned i = 1, e = CI.getNumOperands(); i != e; ++i)
1733 Args.push_back(ValueRecord(CI.getOperand(i)));
1735 unsigned DestReg = CI.getType() != Type::VoidTy ? getReg(CI) : 0;
1736 doCall(ValueRecord(DestReg, CI.getType()), TheCall, Args);
1739 /// LowerUnknownIntrinsicFunctionCalls - This performs a prepass over the
1740 /// function, lowering any calls to unknown intrinsic functions into the
1741 /// equivalent LLVM code.
1743 void X86ISel::LowerUnknownIntrinsicFunctionCalls(Function &F) {
1744 for (Function::iterator BB = F.begin(), E = F.end(); BB != E; ++BB)
1745 for (BasicBlock::iterator I = BB->begin(), E = BB->end(); I != E; )
1746 if (CallInst *CI = dyn_cast<CallInst>(I++))
1747 if (Function *F = CI->getCalledFunction())
1748 switch (F->getIntrinsicID()) {
1749 case Intrinsic::not_intrinsic:
1750 case Intrinsic::vastart:
1751 case Intrinsic::vacopy:
1752 case Intrinsic::vaend:
1753 case Intrinsic::returnaddress:
1754 case Intrinsic::frameaddress:
1755 case Intrinsic::memcpy:
1756 case Intrinsic::memset:
1757 case Intrinsic::isunordered:
1758 case Intrinsic::readport:
1759 case Intrinsic::writeport:
1760 // We directly implement these intrinsics
1762 case Intrinsic::readio: {
1763 // On X86, memory operations are in-order. Lower this intrinsic
1764 // into a volatile load.
1765 Instruction *Before = CI->getPrev();
1766 LoadInst * LI = new LoadInst(CI->getOperand(1), "", true, CI);
1767 CI->replaceAllUsesWith(LI);
1768 BB->getInstList().erase(CI);
1771 case Intrinsic::writeio: {
1772 // On X86, memory operations are in-order. Lower this intrinsic
1773 // into a volatile store.
1774 Instruction *Before = CI->getPrev();
1775 StoreInst *LI = new StoreInst(CI->getOperand(1),
1776 CI->getOperand(2), true, CI);
1777 CI->replaceAllUsesWith(LI);
1778 BB->getInstList().erase(CI);
1782 // All other intrinsic calls we must lower.
1783 Instruction *Before = CI->getPrev();
1784 TM.getIntrinsicLowering().LowerIntrinsicCall(CI);
1785 if (Before) { // Move iterator to instruction after call
1793 void X86ISel::visitIntrinsicCall(Intrinsic::ID ID, CallInst &CI) {
1794 unsigned TmpReg1, TmpReg2;
1796 case Intrinsic::vastart:
1797 // Get the address of the first vararg value...
1798 TmpReg1 = getReg(CI);
1799 addFrameReference(BuildMI(BB, X86::LEA32r, 5, TmpReg1), VarArgsFrameIndex);
1802 case Intrinsic::vacopy:
1803 TmpReg1 = getReg(CI);
1804 TmpReg2 = getReg(CI.getOperand(1));
1805 BuildMI(BB, X86::MOV32rr, 1, TmpReg1).addReg(TmpReg2);
1807 case Intrinsic::vaend: return; // Noop on X86
1809 case Intrinsic::returnaddress:
1810 case Intrinsic::frameaddress:
1811 TmpReg1 = getReg(CI);
1812 if (cast<Constant>(CI.getOperand(1))->isNullValue()) {
1813 if (ReturnAddressIndex == 0) {
1814 // Set up a frame object for the return address.
1815 ReturnAddressIndex = F->getFrameInfo()->CreateFixedObject(4, -4);
1818 if (ID == Intrinsic::returnaddress) {
1819 // Just load the return address
1820 addFrameReference(BuildMI(BB, X86::MOV32rm, 4, TmpReg1),
1821 ReturnAddressIndex);
1823 addFrameReference(BuildMI(BB, X86::LEA32r, 4, TmpReg1),
1824 ReturnAddressIndex, -4);
1827 // Values other than zero are not implemented yet.
1828 BuildMI(BB, X86::MOV32ri, 1, TmpReg1).addImm(0);
1832 case Intrinsic::isunordered:
1833 TmpReg1 = getReg(CI.getOperand(1));
1834 TmpReg2 = getReg(CI.getOperand(2));
1835 emitUCOMr(BB, BB->end(), TmpReg2, TmpReg1);
1836 TmpReg2 = getReg(CI);
1837 BuildMI(BB, X86::SETPr, 0, TmpReg2);
1840 case Intrinsic::memcpy: {
1841 assert(CI.getNumOperands() == 5 && "Illegal llvm.memcpy call!");
1843 if (ConstantInt *AlignC = dyn_cast<ConstantInt>(CI.getOperand(4))) {
1844 Align = AlignC->getRawValue();
1845 if (Align == 0) Align = 1;
1848 // Turn the byte code into # iterations
1851 switch (Align & 3) {
1852 case 2: // WORD aligned
1853 if (ConstantInt *I = dyn_cast<ConstantInt>(CI.getOperand(3))) {
1854 CountReg = getReg(ConstantUInt::get(Type::UIntTy, I->getRawValue()/2));
1856 CountReg = makeAnotherReg(Type::IntTy);
1857 unsigned ByteReg = getReg(CI.getOperand(3));
1858 BuildMI(BB, X86::SHR32ri, 2, CountReg).addReg(ByteReg).addImm(1);
1860 Opcode = X86::REP_MOVSW;
1862 case 0: // DWORD aligned
1863 if (ConstantInt *I = dyn_cast<ConstantInt>(CI.getOperand(3))) {
1864 CountReg = getReg(ConstantUInt::get(Type::UIntTy, I->getRawValue()/4));
1866 CountReg = makeAnotherReg(Type::IntTy);
1867 unsigned ByteReg = getReg(CI.getOperand(3));
1868 BuildMI(BB, X86::SHR32ri, 2, CountReg).addReg(ByteReg).addImm(2);
1870 Opcode = X86::REP_MOVSD;
1872 default: // BYTE aligned
1873 CountReg = getReg(CI.getOperand(3));
1874 Opcode = X86::REP_MOVSB;
1878 // No matter what the alignment is, we put the source in ESI, the
1879 // destination in EDI, and the count in ECX.
1880 TmpReg1 = getReg(CI.getOperand(1));
1881 TmpReg2 = getReg(CI.getOperand(2));
1882 BuildMI(BB, X86::MOV32rr, 1, X86::ECX).addReg(CountReg);
1883 BuildMI(BB, X86::MOV32rr, 1, X86::EDI).addReg(TmpReg1);
1884 BuildMI(BB, X86::MOV32rr, 1, X86::ESI).addReg(TmpReg2);
1885 BuildMI(BB, Opcode, 0);
1888 case Intrinsic::memset: {
1889 assert(CI.getNumOperands() == 5 && "Illegal llvm.memset call!");
1891 if (ConstantInt *AlignC = dyn_cast<ConstantInt>(CI.getOperand(4))) {
1892 Align = AlignC->getRawValue();
1893 if (Align == 0) Align = 1;
1896 // Turn the byte code into # iterations
1899 if (ConstantInt *ValC = dyn_cast<ConstantInt>(CI.getOperand(2))) {
1900 unsigned Val = ValC->getRawValue() & 255;
1902 // If the value is a constant, then we can potentially use larger copies.
1903 switch (Align & 3) {
1904 case 2: // WORD aligned
1905 if (ConstantInt *I = dyn_cast<ConstantInt>(CI.getOperand(3))) {
1906 CountReg =getReg(ConstantUInt::get(Type::UIntTy, I->getRawValue()/2));
1908 CountReg = makeAnotherReg(Type::IntTy);
1909 unsigned ByteReg = getReg(CI.getOperand(3));
1910 BuildMI(BB, X86::SHR32ri, 2, CountReg).addReg(ByteReg).addImm(1);
1912 BuildMI(BB, X86::MOV16ri, 1, X86::AX).addImm((Val << 8) | Val);
1913 Opcode = X86::REP_STOSW;
1915 case 0: // DWORD aligned
1916 if (ConstantInt *I = dyn_cast<ConstantInt>(CI.getOperand(3))) {
1917 CountReg =getReg(ConstantUInt::get(Type::UIntTy, I->getRawValue()/4));
1919 CountReg = makeAnotherReg(Type::IntTy);
1920 unsigned ByteReg = getReg(CI.getOperand(3));
1921 BuildMI(BB, X86::SHR32ri, 2, CountReg).addReg(ByteReg).addImm(2);
1923 Val = (Val << 8) | Val;
1924 BuildMI(BB, X86::MOV32ri, 1, X86::EAX).addImm((Val << 16) | Val);
1925 Opcode = X86::REP_STOSD;
1927 default: // BYTE aligned
1928 CountReg = getReg(CI.getOperand(3));
1929 BuildMI(BB, X86::MOV8ri, 1, X86::AL).addImm(Val);
1930 Opcode = X86::REP_STOSB;
1934 // If it's not a constant value we are storing, just fall back. We could
1935 // try to be clever to form 16 bit and 32 bit values, but we don't yet.
1936 unsigned ValReg = getReg(CI.getOperand(2));
1937 BuildMI(BB, X86::MOV8rr, 1, X86::AL).addReg(ValReg);
1938 CountReg = getReg(CI.getOperand(3));
1939 Opcode = X86::REP_STOSB;
1942 // No matter what the alignment is, we put the source in ESI, the
1943 // destination in EDI, and the count in ECX.
1944 TmpReg1 = getReg(CI.getOperand(1));
1945 //TmpReg2 = getReg(CI.getOperand(2));
1946 BuildMI(BB, X86::MOV32rr, 1, X86::ECX).addReg(CountReg);
1947 BuildMI(BB, X86::MOV32rr, 1, X86::EDI).addReg(TmpReg1);
1948 BuildMI(BB, Opcode, 0);
1952 case Intrinsic::readport: {
1953 // First, determine that the size of the operand falls within the acceptable
1954 // range for this architecture.
1956 if (getClassB(CI.getOperand(1)->getType()) != cShort) {
1957 std::cerr << "llvm.readport: Address size is not 16 bits\n";
1961 // Now, move the I/O port address into the DX register and use the IN
1962 // instruction to get the input data.
1964 unsigned Class = getClass(CI.getCalledFunction()->getReturnType());
1965 unsigned DestReg = getReg(CI);
1967 // If the port is a single-byte constant, use the immediate form.
1968 if (ConstantInt *C = dyn_cast<ConstantInt>(CI.getOperand(1)))
1969 if ((C->getRawValue() & 255) == C->getRawValue()) {
1972 BuildMI(BB, X86::IN8ri, 1).addImm((unsigned char)C->getRawValue());
1973 BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::AL);
1976 BuildMI(BB, X86::IN16ri, 1).addImm((unsigned char)C->getRawValue());
1977 BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::AX);
1980 BuildMI(BB, X86::IN32ri, 1).addImm((unsigned char)C->getRawValue());
1981 BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::EAX);
1986 unsigned Reg = getReg(CI.getOperand(1));
1987 BuildMI(BB, X86::MOV16rr, 1, X86::DX).addReg(Reg);
1990 BuildMI(BB, X86::IN8rr, 0);
1991 BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::AL);
1994 BuildMI(BB, X86::IN16rr, 0);
1995 BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::AX);
1998 BuildMI(BB, X86::IN32rr, 0);
1999 BuildMI(BB, X86::MOV8rr, 1, DestReg).addReg(X86::EAX);
2002 std::cerr << "Cannot do input on this data type";
2008 case Intrinsic::writeport: {
2009 // First, determine that the size of the operand falls within the
2010 // acceptable range for this architecture.
2011 if (getClass(CI.getOperand(2)->getType()) != cShort) {
2012 std::cerr << "llvm.writeport: Address size is not 16 bits\n";
2016 unsigned Class = getClassB(CI.getOperand(1)->getType());
2017 unsigned ValReg = getReg(CI.getOperand(1));
2020 BuildMI(BB, X86::MOV8rr, 1, X86::AL).addReg(ValReg);
2023 BuildMI(BB, X86::MOV16rr, 1, X86::AX).addReg(ValReg);
2026 BuildMI(BB, X86::MOV32rr, 1, X86::EAX).addReg(ValReg);
2029 std::cerr << "llvm.writeport: invalid data type for X86 target";
2034 // If the port is a single-byte constant, use the immediate form.
2035 if (ConstantInt *C = dyn_cast<ConstantInt>(CI.getOperand(2)))
2036 if ((C->getRawValue() & 255) == C->getRawValue()) {
2037 static const unsigned O[] = { X86::OUT8ir, X86::OUT16ir, X86::OUT32ir };
2038 BuildMI(BB, O[Class], 1).addImm((unsigned char)C->getRawValue());
2042 // Otherwise, move the I/O port address into the DX register and the value
2043 // to write into the AL/AX/EAX register.
2044 static const unsigned Opc[] = { X86::OUT8rr, X86::OUT16rr, X86::OUT32rr };
2045 unsigned Reg = getReg(CI.getOperand(2));
2046 BuildMI(BB, X86::MOV16rr, 1, X86::DX).addReg(Reg);
2047 BuildMI(BB, Opc[Class], 0);
2051 default: assert(0 && "Error: unknown intrinsics should have been lowered!");
2055 static bool isSafeToFoldLoadIntoInstruction(LoadInst &LI, Instruction &User) {
2056 if (LI.getParent() != User.getParent())
2058 BasicBlock::iterator It = &LI;
2059 // Check all of the instructions between the load and the user. We should
2060 // really use alias analysis here, but for now we just do something simple.
2061 for (++It; It != BasicBlock::iterator(&User); ++It) {
2062 switch (It->getOpcode()) {
2063 case Instruction::Free:
2064 case Instruction::Store:
2065 case Instruction::Call:
2066 case Instruction::Invoke:
2068 case Instruction::Load:
2069 if (cast<LoadInst>(It)->isVolatile() && LI.isVolatile())
2077 /// visitSimpleBinary - Implement simple binary operators for integral types...
2078 /// OperatorClass is one of: 0 for Add, 1 for Sub, 2 for And, 3 for Or, 4 for
2081 void X86ISel::visitSimpleBinary(BinaryOperator &B, unsigned OperatorClass) {
2082 unsigned DestReg = getReg(B);
2083 MachineBasicBlock::iterator MI = BB->end();
2084 Value *Op0 = B.getOperand(0), *Op1 = B.getOperand(1);
2085 unsigned Class = getClassB(B.getType());
2087 // If this is AND X, C, and it is only used by a setcc instruction, it will
2088 // be folded. There is no need to emit this instruction.
2089 if (B.hasOneUse() && OperatorClass == 2 && isa<ConstantInt>(Op1))
2090 if (Class == cByte || Class == cShort || Class == cInt) {
2091 Instruction *Use = cast<Instruction>(B.use_back());
2092 if (isa<SetCondInst>(Use) &&
2093 Use->getOperand(1) == Constant::getNullValue(B.getType())) {
2094 switch (getSetCCNumber(Use->getOpcode())) {
2099 if (B.getType()->isSigned()) return;
2104 // Special case: op Reg, load [mem]
2105 if (isa<LoadInst>(Op0) && !isa<LoadInst>(Op1) && Class != cLong &&
2107 isSafeToFoldLoadIntoInstruction(*cast<LoadInst>(Op0), B))
2108 if (!B.swapOperands())
2109 std::swap(Op0, Op1); // Make sure any loads are in the RHS.
2111 if (isa<LoadInst>(Op1) && Class != cLong && Op1->hasOneUse() &&
2112 isSafeToFoldLoadIntoInstruction(*cast<LoadInst>(Op1), B)) {
2116 static const unsigned OpcodeTab[][3] = {
2117 // Arithmetic operators
2118 { X86::ADD8rm, X86::ADD16rm, X86::ADD32rm }, // ADD
2119 { X86::SUB8rm, X86::SUB16rm, X86::SUB32rm }, // SUB
2121 // Bitwise operators
2122 { X86::AND8rm, X86::AND16rm, X86::AND32rm }, // AND
2123 { X86:: OR8rm, X86:: OR16rm, X86:: OR32rm }, // OR
2124 { X86::XOR8rm, X86::XOR16rm, X86::XOR32rm }, // XOR
2126 Opcode = OpcodeTab[OperatorClass][Class];
2128 static const unsigned OpcodeTab[][2] = {
2129 { X86::FADD32m, X86::FADD64m }, // ADD
2130 { X86::FSUB32m, X86::FSUB64m }, // SUB
2132 const Type *Ty = Op0->getType();
2133 assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
2134 Opcode = OpcodeTab[OperatorClass][Ty == Type::DoubleTy];
2137 unsigned Op0r = getReg(Op0);
2138 if (AllocaInst *AI =
2139 dyn_castFixedAlloca(cast<LoadInst>(Op1)->getOperand(0))) {
2140 unsigned FI = getFixedSizedAllocaFI(AI);
2141 addFrameReference(BuildMI(BB, Opcode, 5, DestReg).addReg(Op0r), FI);
2145 getAddressingMode(cast<LoadInst>(Op1)->getOperand(0), AM);
2147 addFullAddress(BuildMI(BB, Opcode, 5, DestReg).addReg(Op0r), AM);
2152 // If this is a floating point subtract, check to see if we can fold the first
2154 if (Class == cFP && OperatorClass == 1 &&
2155 isa<LoadInst>(Op0) &&
2156 isSafeToFoldLoadIntoInstruction(*cast<LoadInst>(Op0), B)) {
2157 const Type *Ty = Op0->getType();
2158 assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
2159 unsigned Opcode = Ty == Type::FloatTy ? X86::FSUBR32m : X86::FSUBR64m;
2161 unsigned Op1r = getReg(Op1);
2162 if (AllocaInst *AI =
2163 dyn_castFixedAlloca(cast<LoadInst>(Op0)->getOperand(0))) {
2164 unsigned FI = getFixedSizedAllocaFI(AI);
2165 addFrameReference(BuildMI(BB, Opcode, 5, DestReg).addReg(Op1r), FI);
2168 getAddressingMode(cast<LoadInst>(Op0)->getOperand(0), AM);
2170 addFullAddress(BuildMI(BB, Opcode, 5, DestReg).addReg(Op1r), AM);
2175 emitSimpleBinaryOperation(BB, MI, Op0, Op1, OperatorClass, DestReg);
2179 /// emitBinaryFPOperation - This method handles emission of floating point
2180 /// Add (0), Sub (1), Mul (2), and Div (3) operations.
2181 void X86ISel::emitBinaryFPOperation(MachineBasicBlock *BB,
2182 MachineBasicBlock::iterator IP,
2183 Value *Op0, Value *Op1,
2184 unsigned OperatorClass, unsigned DestReg) {
2185 // Special case: op Reg, <const fp>
2186 if (ConstantFP *Op1C = dyn_cast<ConstantFP>(Op1))
2187 if (!Op1C->isExactlyValue(+0.0) && !Op1C->isExactlyValue(+1.0)) {
2188 // Create a constant pool entry for this constant.
2189 MachineConstantPool *CP = F->getConstantPool();
2190 unsigned CPI = CP->getConstantPoolIndex(Op1C);
2191 const Type *Ty = Op1->getType();
2193 static const unsigned OpcodeTab[][4] = {
2194 { X86::FADD32m, X86::FSUB32m, X86::FMUL32m, X86::FDIV32m }, // Float
2195 { X86::FADD64m, X86::FSUB64m, X86::FMUL64m, X86::FDIV64m }, // Double
2198 assert(Ty == Type::FloatTy || Ty == Type::DoubleTy && "Unknown FP type!");
2199 unsigned Opcode = OpcodeTab[Ty != Type::FloatTy][OperatorClass];
2200 unsigned Op0r = getReg(Op0, BB, IP);
2201 addConstantPoolReference(BuildMI(*BB, IP, Opcode, 5,
2202 DestReg).addReg(Op0r), CPI);
2206 // Special case: R1 = op <const fp>, R2
2207 if (ConstantFP *CFP = dyn_cast<ConstantFP>(Op0))
2208 if (CFP->isExactlyValue(-0.0) && OperatorClass == 1) {
2210 unsigned op1Reg = getReg(Op1, BB, IP);
2211 BuildMI(*BB, IP, X86::FCHS, 1, DestReg).addReg(op1Reg);
2213 } else if (!CFP->isExactlyValue(+0.0) && !CFP->isExactlyValue(+1.0)) {
2214 // R1 = op CST, R2 --> R1 = opr R2, CST
2216 // Create a constant pool entry for this constant.
2217 MachineConstantPool *CP = F->getConstantPool();
2218 unsigned CPI = CP->getConstantPoolIndex(CFP);
2219 const Type *Ty = CFP->getType();
2221 static const unsigned OpcodeTab[][4] = {
2222 { X86::FADD32m, X86::FSUBR32m, X86::FMUL32m, X86::FDIVR32m }, // Float
2223 { X86::FADD64m, X86::FSUBR64m, X86::FMUL64m, X86::FDIVR64m }, // Double
2226 assert(Ty == Type::FloatTy||Ty == Type::DoubleTy && "Unknown FP type!");
2227 unsigned Opcode = OpcodeTab[Ty != Type::FloatTy][OperatorClass];
2228 unsigned Op1r = getReg(Op1, BB, IP);
2229 addConstantPoolReference(BuildMI(*BB, IP, Opcode, 5,
2230 DestReg).addReg(Op1r), CPI);
2235 static const unsigned OpcodeTab[4] = {
2236 X86::FpADD, X86::FpSUB, X86::FpMUL, X86::FpDIV
2239 unsigned Opcode = OpcodeTab[OperatorClass];
2240 unsigned Op0r = getReg(Op0, BB, IP);
2241 unsigned Op1r = getReg(Op1, BB, IP);
2242 BuildMI(*BB, IP, Opcode, 2, DestReg).addReg(Op0r).addReg(Op1r);
2245 /// emitSimpleBinaryOperation - Implement simple binary operators for integral
2246 /// types... OperatorClass is one of: 0 for Add, 1 for Sub, 2 for And, 3 for
2249 /// emitSimpleBinaryOperation - Common code shared between visitSimpleBinary
2250 /// and constant expression support.
2252 void X86ISel::emitSimpleBinaryOperation(MachineBasicBlock *MBB,
2253 MachineBasicBlock::iterator IP,
2254 Value *Op0, Value *Op1,
2255 unsigned OperatorClass,
2257 unsigned Class = getClassB(Op0->getType());
2260 assert(OperatorClass < 2 && "No logical ops for FP!");
2261 emitBinaryFPOperation(MBB, IP, Op0, Op1, OperatorClass, DestReg);
2265 if (ConstantInt *CI = dyn_cast<ConstantInt>(Op0))
2266 if (OperatorClass == 1) {
2267 static unsigned const NEGTab[] = {
2268 X86::NEG8r, X86::NEG16r, X86::NEG32r, 0, X86::NEG32r
2271 // sub 0, X -> neg X
2272 if (CI->isNullValue()) {
2273 unsigned op1Reg = getReg(Op1, MBB, IP);
2274 BuildMI(*MBB, IP, NEGTab[Class], 1, DestReg).addReg(op1Reg);
2276 if (Class == cLong) {
2277 // We just emitted: Dl = neg Sl
2278 // Now emit : T = addc Sh, 0
2280 unsigned T = makeAnotherReg(Type::IntTy);
2281 BuildMI(*MBB, IP, X86::ADC32ri, 2, T).addReg(op1Reg+1).addImm(0);
2282 BuildMI(*MBB, IP, X86::NEG32r, 1, DestReg+1).addReg(T);
2285 } else if (Op1->hasOneUse() && Class != cLong) {
2286 // sub C, X -> tmp = neg X; DestReg = add tmp, C. This is better
2287 // than copying C into a temporary register, because of register
2288 // pressure (tmp and destreg can share a register.
2289 static unsigned const ADDRITab[] = {
2290 X86::ADD8ri, X86::ADD16ri, X86::ADD32ri, 0, X86::ADD32ri
2292 unsigned op1Reg = getReg(Op1, MBB, IP);
2293 unsigned Tmp = makeAnotherReg(Op0->getType());
2294 BuildMI(*MBB, IP, NEGTab[Class], 1, Tmp).addReg(op1Reg);
2295 BuildMI(*MBB, IP, ADDRITab[Class], 2,
2296 DestReg).addReg(Tmp).addImm(CI->getRawValue());
2301 // Special case: op Reg, <const int>
2302 if (ConstantInt *Op1C = dyn_cast<ConstantInt>(Op1)) {
2303 unsigned Op0r = getReg(Op0, MBB, IP);
2305 // xor X, -1 -> not X
2306 if (OperatorClass == 4 && Op1C->isAllOnesValue()) {
2307 static unsigned const NOTTab[] = {
2308 X86::NOT8r, X86::NOT16r, X86::NOT32r, 0, X86::NOT32r
2310 BuildMI(*MBB, IP, NOTTab[Class], 1, DestReg).addReg(Op0r);
2311 if (Class == cLong) // Invert the top part too
2312 BuildMI(*MBB, IP, X86::NOT32r, 1, DestReg+1).addReg(Op0r+1);
2316 // add X, -1 -> dec X
2317 if (OperatorClass == 0 && Op1C->isAllOnesValue() && Class != cLong) {
2318 // Note that we can't use dec for 64-bit decrements, because it does not
2319 // set the carry flag!
2320 static unsigned const DECTab[] = { X86::DEC8r, X86::DEC16r, X86::DEC32r };
2321 BuildMI(*MBB, IP, DECTab[Class], 1, DestReg).addReg(Op0r);
2325 // add X, 1 -> inc X
2326 if (OperatorClass == 0 && Op1C->equalsInt(1) && Class != cLong) {
2327 // Note that we can't use inc for 64-bit increments, because it does not
2328 // set the carry flag!
2329 static unsigned const INCTab[] = { X86::INC8r, X86::INC16r, X86::INC32r };
2330 BuildMI(*MBB, IP, INCTab[Class], 1, DestReg).addReg(Op0r);
2334 static const unsigned OpcodeTab[][5] = {
2335 // Arithmetic operators
2336 { X86::ADD8ri, X86::ADD16ri, X86::ADD32ri, 0, X86::ADD32ri }, // ADD
2337 { X86::SUB8ri, X86::SUB16ri, X86::SUB32ri, 0, X86::SUB32ri }, // SUB
2339 // Bitwise operators
2340 { X86::AND8ri, X86::AND16ri, X86::AND32ri, 0, X86::AND32ri }, // AND
2341 { X86:: OR8ri, X86:: OR16ri, X86:: OR32ri, 0, X86::OR32ri }, // OR
2342 { X86::XOR8ri, X86::XOR16ri, X86::XOR32ri, 0, X86::XOR32ri }, // XOR
2345 unsigned Opcode = OpcodeTab[OperatorClass][Class];
2346 unsigned Op1l = cast<ConstantInt>(Op1C)->getRawValue();
2348 if (Class != cLong) {
2349 BuildMI(*MBB, IP, Opcode, 2, DestReg).addReg(Op0r).addImm(Op1l);
2353 // If this is a long value and the high or low bits have a special
2354 // property, emit some special cases.
2355 unsigned Op1h = cast<ConstantInt>(Op1C)->getRawValue() >> 32LL;
2357 // If the constant is zero in the low 32-bits, just copy the low part
2358 // across and apply the normal 32-bit operation to the high parts. There
2359 // will be no carry or borrow into the top.
2361 if (OperatorClass != 2) // All but and...
2362 BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg).addReg(Op0r);
2364 BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg).addImm(0);
2365 BuildMI(*MBB, IP, OpcodeTab[OperatorClass][cLong], 2, DestReg+1)
2366 .addReg(Op0r+1).addImm(Op1h);
2370 // If this is a logical operation and the top 32-bits are zero, just
2371 // operate on the lower 32.
2372 if (Op1h == 0 && OperatorClass > 1) {
2373 BuildMI(*MBB, IP, OpcodeTab[OperatorClass][cLong], 2, DestReg)
2374 .addReg(Op0r).addImm(Op1l);
2375 if (OperatorClass != 2) // All but and
2376 BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg+1).addReg(Op0r+1);
2378 BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg+1).addImm(0);
2382 // TODO: We could handle lots of other special cases here, such as AND'ing
2383 // with 0xFFFFFFFF00000000 -> noop, etc.
2385 // Otherwise, code generate the full operation with a constant.
2386 static const unsigned TopTab[] = {
2387 X86::ADC32ri, X86::SBB32ri, X86::AND32ri, X86::OR32ri, X86::XOR32ri
2390 BuildMI(*MBB, IP, Opcode, 2, DestReg).addReg(Op0r).addImm(Op1l);
2391 BuildMI(*MBB, IP, TopTab[OperatorClass], 2, DestReg+1)
2392 .addReg(Op0r+1).addImm(Op1h);
2396 // Finally, handle the general case now.
2397 static const unsigned OpcodeTab[][5] = {
2398 // Arithmetic operators
2399 { X86::ADD8rr, X86::ADD16rr, X86::ADD32rr, 0, X86::ADD32rr }, // ADD
2400 { X86::SUB8rr, X86::SUB16rr, X86::SUB32rr, 0, X86::SUB32rr }, // SUB
2402 // Bitwise operators
2403 { X86::AND8rr, X86::AND16rr, X86::AND32rr, 0, X86::AND32rr }, // AND
2404 { X86:: OR8rr, X86:: OR16rr, X86:: OR32rr, 0, X86:: OR32rr }, // OR
2405 { X86::XOR8rr, X86::XOR16rr, X86::XOR32rr, 0, X86::XOR32rr }, // XOR
2408 unsigned Opcode = OpcodeTab[OperatorClass][Class];
2409 unsigned Op0r = getReg(Op0, MBB, IP);
2410 unsigned Op1r = getReg(Op1, MBB, IP);
2411 BuildMI(*MBB, IP, Opcode, 2, DestReg).addReg(Op0r).addReg(Op1r);
2413 if (Class == cLong) { // Handle the upper 32 bits of long values...
2414 static const unsigned TopTab[] = {
2415 X86::ADC32rr, X86::SBB32rr, X86::AND32rr, X86::OR32rr, X86::XOR32rr
2417 BuildMI(*MBB, IP, TopTab[OperatorClass], 2,
2418 DestReg+1).addReg(Op0r+1).addReg(Op1r+1);
2422 /// doMultiply - Emit appropriate instructions to multiply together the
2423 /// registers op0Reg and op1Reg, and put the result in DestReg. The type of the
2424 /// result should be given as DestTy.
2426 void X86ISel::doMultiply(MachineBasicBlock *MBB,
2427 MachineBasicBlock::iterator MBBI,
2428 unsigned DestReg, const Type *DestTy,
2429 unsigned op0Reg, unsigned op1Reg) {
2430 unsigned Class = getClass(DestTy);
2434 BuildMI(*MBB, MBBI, Class == cInt ? X86::IMUL32rr:X86::IMUL16rr, 2, DestReg)
2435 .addReg(op0Reg).addReg(op1Reg);
2438 // Must use the MUL instruction, which forces use of AL...
2439 BuildMI(*MBB, MBBI, X86::MOV8rr, 1, X86::AL).addReg(op0Reg);
2440 BuildMI(*MBB, MBBI, X86::MUL8r, 1).addReg(op1Reg);
2441 BuildMI(*MBB, MBBI, X86::MOV8rr, 1, DestReg).addReg(X86::AL);
2444 case cLong: assert(0 && "doMultiply cannot operate on LONG values!");
2448 // ExactLog2 - This function solves for (Val == 1 << (N-1)) and returns N. It
2449 // returns zero when the input is not exactly a power of two.
2450 static unsigned ExactLog2(unsigned Val) {
2451 if (Val == 0 || (Val & (Val-1))) return 0;
2461 /// doMultiplyConst - This function is specialized to efficiently codegen an 8,
2462 /// 16, or 32-bit integer multiply by a constant.
2463 void X86ISel::doMultiplyConst(MachineBasicBlock *MBB,
2464 MachineBasicBlock::iterator IP,
2465 unsigned DestReg, const Type *DestTy,
2466 unsigned op0Reg, unsigned ConstRHS) {
2467 static const unsigned MOVrrTab[] = {X86::MOV8rr, X86::MOV16rr, X86::MOV32rr};
2468 static const unsigned MOVriTab[] = {X86::MOV8ri, X86::MOV16ri, X86::MOV32ri};
2469 static const unsigned ADDrrTab[] = {X86::ADD8rr, X86::ADD16rr, X86::ADD32rr};
2470 static const unsigned NEGrTab[] = {X86::NEG8r , X86::NEG16r , X86::NEG32r };
2472 unsigned Class = getClass(DestTy);
2475 // Handle special cases here.
2478 TmpReg = makeAnotherReg(DestTy);
2479 BuildMI(*MBB, IP, NEGrTab[Class], 1, TmpReg).addReg(op0Reg);
2480 BuildMI(*MBB, IP, ADDrrTab[Class], 1,DestReg).addReg(TmpReg).addReg(TmpReg);
2483 BuildMI(*MBB, IP, NEGrTab[Class], 1, DestReg).addReg(op0Reg);
2486 BuildMI(*MBB, IP, MOVriTab[Class], 1, DestReg).addImm(0);
2489 BuildMI(*MBB, IP, MOVrrTab[Class], 1, DestReg).addReg(op0Reg);
2492 BuildMI(*MBB, IP, ADDrrTab[Class], 1,DestReg).addReg(op0Reg).addReg(op0Reg);
2497 if (Class == cInt) {
2499 AM.BaseType = X86AddressMode::RegBase;
2500 AM.Base.Reg = op0Reg;
2501 AM.Scale = ConstRHS-1;
2502 AM.IndexReg = op0Reg;
2504 addFullAddress(BuildMI(*MBB, IP, X86::LEA32r, 5, DestReg), AM);
2510 if (Class == cInt) {
2511 TmpReg = makeAnotherReg(DestTy);
2513 AM.BaseType = X86AddressMode::RegBase;
2514 AM.Base.Reg = op0Reg;
2515 AM.Scale = -ConstRHS-1;
2516 AM.IndexReg = op0Reg;
2518 addFullAddress(BuildMI(*MBB, IP, X86::LEA32r, 5, TmpReg), AM);
2519 BuildMI(*MBB, IP, NEGrTab[Class], 1, DestReg).addReg(TmpReg);
2524 // If the element size is exactly a power of 2, use a shift to get it.
2525 if (unsigned Shift = ExactLog2(ConstRHS)) {
2527 default: assert(0 && "Unknown class for this function!");
2529 BuildMI(*MBB, IP, X86::SHL8ri,2, DestReg).addReg(op0Reg).addImm(Shift-1);
2532 BuildMI(*MBB, IP, X86::SHL16ri,2, DestReg).addReg(op0Reg).addImm(Shift-1);
2535 BuildMI(*MBB, IP, X86::SHL32ri,2, DestReg).addReg(op0Reg).addImm(Shift-1);
2540 // If the element size is a negative power of 2, use a shift/neg to get it.
2541 if (unsigned Shift = ExactLog2(-ConstRHS)) {
2542 TmpReg = makeAnotherReg(DestTy);
2543 BuildMI(*MBB, IP, NEGrTab[Class], 1, TmpReg).addReg(op0Reg);
2545 default: assert(0 && "Unknown class for this function!");
2547 BuildMI(*MBB, IP, X86::SHL8ri,2, DestReg).addReg(TmpReg).addImm(Shift-1);
2550 BuildMI(*MBB, IP, X86::SHL16ri,2, DestReg).addReg(TmpReg).addImm(Shift-1);
2553 BuildMI(*MBB, IP, X86::SHL32ri,2, DestReg).addReg(TmpReg).addImm(Shift-1);
2558 if (Class == cShort) {
2559 BuildMI(*MBB, IP, X86::IMUL16rri,2,DestReg).addReg(op0Reg).addImm(ConstRHS);
2561 } else if (Class == cInt) {
2562 BuildMI(*MBB, IP, X86::IMUL32rri,2,DestReg).addReg(op0Reg).addImm(ConstRHS);
2566 // Most general case, emit a normal multiply...
2567 TmpReg = makeAnotherReg(DestTy);
2568 BuildMI(*MBB, IP, MOVriTab[Class], 1, TmpReg).addImm(ConstRHS);
2570 // Emit a MUL to multiply the register holding the index by
2571 // elementSize, putting the result in OffsetReg.
2572 doMultiply(MBB, IP, DestReg, DestTy, op0Reg, TmpReg);
2575 /// visitMul - Multiplies are not simple binary operators because they must deal
2576 /// with the EAX register explicitly.
2578 void X86ISel::visitMul(BinaryOperator &I) {
2579 unsigned ResultReg = getReg(I);
2581 Value *Op0 = I.getOperand(0);
2582 Value *Op1 = I.getOperand(1);
2584 // Fold loads into floating point multiplies.
2585 if (getClass(Op0->getType()) == cFP) {
2586 if (isa<LoadInst>(Op0) && !isa<LoadInst>(Op1))
2587 if (!I.swapOperands())
2588 std::swap(Op0, Op1); // Make sure any loads are in the RHS.
2589 if (LoadInst *LI = dyn_cast<LoadInst>(Op1))
2590 if (isSafeToFoldLoadIntoInstruction(*LI, I)) {
2591 const Type *Ty = Op0->getType();
2592 assert(Ty == Type::FloatTy||Ty == Type::DoubleTy && "Unknown FP type!");
2593 unsigned Opcode = Ty == Type::FloatTy ? X86::FMUL32m : X86::FMUL64m;
2595 unsigned Op0r = getReg(Op0);
2596 if (AllocaInst *AI = dyn_castFixedAlloca(LI->getOperand(0))) {
2597 unsigned FI = getFixedSizedAllocaFI(AI);
2598 addFrameReference(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op0r), FI);
2601 getAddressingMode(LI->getOperand(0), AM);
2603 addFullAddress(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op0r), AM);
2609 MachineBasicBlock::iterator IP = BB->end();
2610 emitMultiply(BB, IP, Op0, Op1, ResultReg);
2613 void X86ISel::emitMultiply(MachineBasicBlock *MBB,
2614 MachineBasicBlock::iterator IP,
2615 Value *Op0, Value *Op1, unsigned DestReg) {
2616 MachineBasicBlock &BB = *MBB;
2617 TypeClass Class = getClass(Op0->getType());
2619 // Simple scalar multiply?
2620 unsigned Op0Reg = getReg(Op0, &BB, IP);
2625 if (ConstantInt *CI = dyn_cast<ConstantInt>(Op1)) {
2626 unsigned Val = (unsigned)CI->getRawValue(); // Isn't a 64-bit constant
2627 doMultiplyConst(&BB, IP, DestReg, Op0->getType(), Op0Reg, Val);
2629 unsigned Op1Reg = getReg(Op1, &BB, IP);
2630 doMultiply(&BB, IP, DestReg, Op1->getType(), Op0Reg, Op1Reg);
2634 emitBinaryFPOperation(MBB, IP, Op0, Op1, 2, DestReg);
2640 // Long value. We have to do things the hard way...
2641 if (ConstantInt *CI = dyn_cast<ConstantInt>(Op1)) {
2642 unsigned CLow = CI->getRawValue();
2643 unsigned CHi = CI->getRawValue() >> 32;
2646 // If the low part of the constant is all zeros, things are simple.
2647 BuildMI(BB, IP, X86::MOV32ri, 1, DestReg).addImm(0);
2648 doMultiplyConst(&BB, IP, DestReg+1, Type::UIntTy, Op0Reg, CHi);
2652 // Multiply the two low parts... capturing carry into EDX
2653 unsigned OverflowReg = 0;
2655 BuildMI(BB, IP, X86::MOV32rr, 1, DestReg).addReg(Op0Reg);
2657 unsigned Op1RegL = makeAnotherReg(Type::UIntTy);
2658 OverflowReg = makeAnotherReg(Type::UIntTy);
2659 BuildMI(BB, IP, X86::MOV32ri, 1, Op1RegL).addImm(CLow);
2660 BuildMI(BB, IP, X86::MOV32rr, 1, X86::EAX).addReg(Op0Reg);
2661 BuildMI(BB, IP, X86::MUL32r, 1).addReg(Op1RegL); // AL*BL
2663 BuildMI(BB, IP, X86::MOV32rr, 1, DestReg).addReg(X86::EAX); // AL*BL
2664 BuildMI(BB, IP, X86::MOV32rr, 1,
2665 OverflowReg).addReg(X86::EDX); // AL*BL >> 32
2668 unsigned AHBLReg = makeAnotherReg(Type::UIntTy); // AH*BL
2669 doMultiplyConst(&BB, IP, AHBLReg, Type::UIntTy, Op0Reg+1, CLow);
2671 unsigned AHBLplusOverflowReg;
2673 AHBLplusOverflowReg = makeAnotherReg(Type::UIntTy);
2674 BuildMI(BB, IP, X86::ADD32rr, 2, // AH*BL+(AL*BL >> 32)
2675 AHBLplusOverflowReg).addReg(AHBLReg).addReg(OverflowReg);
2677 AHBLplusOverflowReg = AHBLReg;
2681 BuildMI(BB, IP, X86::MOV32rr, 1, DestReg+1).addReg(AHBLplusOverflowReg);
2683 unsigned ALBHReg = makeAnotherReg(Type::UIntTy); // AL*BH
2684 doMultiplyConst(&BB, IP, ALBHReg, Type::UIntTy, Op0Reg, CHi);
2686 BuildMI(BB, IP, X86::ADD32rr, 2, // AL*BH + AH*BL + (AL*BL >> 32)
2687 DestReg+1).addReg(AHBLplusOverflowReg).addReg(ALBHReg);
2692 // General 64x64 multiply
2694 unsigned Op1Reg = getReg(Op1, &BB, IP);
2695 // Multiply the two low parts... capturing carry into EDX
2696 BuildMI(BB, IP, X86::MOV32rr, 1, X86::EAX).addReg(Op0Reg);
2697 BuildMI(BB, IP, X86::MUL32r, 1).addReg(Op1Reg); // AL*BL
2699 unsigned OverflowReg = makeAnotherReg(Type::UIntTy);
2700 BuildMI(BB, IP, X86::MOV32rr, 1, DestReg).addReg(X86::EAX); // AL*BL
2701 BuildMI(BB, IP, X86::MOV32rr, 1,
2702 OverflowReg).addReg(X86::EDX); // AL*BL >> 32
2704 unsigned AHBLReg = makeAnotherReg(Type::UIntTy); // AH*BL
2705 BuildMI(BB, IP, X86::IMUL32rr, 2,
2706 AHBLReg).addReg(Op0Reg+1).addReg(Op1Reg);
2708 unsigned AHBLplusOverflowReg = makeAnotherReg(Type::UIntTy);
2709 BuildMI(BB, IP, X86::ADD32rr, 2, // AH*BL+(AL*BL >> 32)
2710 AHBLplusOverflowReg).addReg(AHBLReg).addReg(OverflowReg);
2712 unsigned ALBHReg = makeAnotherReg(Type::UIntTy); // AL*BH
2713 BuildMI(BB, IP, X86::IMUL32rr, 2,
2714 ALBHReg).addReg(Op0Reg).addReg(Op1Reg+1);
2716 BuildMI(BB, IP, X86::ADD32rr, 2, // AL*BH + AH*BL + (AL*BL >> 32)
2717 DestReg+1).addReg(AHBLplusOverflowReg).addReg(ALBHReg);
2721 /// visitDivRem - Handle division and remainder instructions... these
2722 /// instruction both require the same instructions to be generated, they just
2723 /// select the result from a different register. Note that both of these
2724 /// instructions work differently for signed and unsigned operands.
2726 void X86ISel::visitDivRem(BinaryOperator &I) {
2727 unsigned ResultReg = getReg(I);
2728 Value *Op0 = I.getOperand(0), *Op1 = I.getOperand(1);
2730 // Fold loads into floating point divides.
2731 if (getClass(Op0->getType()) == cFP) {
2732 if (LoadInst *LI = dyn_cast<LoadInst>(Op1))
2733 if (isSafeToFoldLoadIntoInstruction(*LI, I)) {
2734 const Type *Ty = Op0->getType();
2735 assert(Ty == Type::FloatTy||Ty == Type::DoubleTy && "Unknown FP type!");
2736 unsigned Opcode = Ty == Type::FloatTy ? X86::FDIV32m : X86::FDIV64m;
2738 unsigned Op0r = getReg(Op0);
2739 if (AllocaInst *AI = dyn_castFixedAlloca(LI->getOperand(0))) {
2740 unsigned FI = getFixedSizedAllocaFI(AI);
2741 addFrameReference(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op0r), FI);
2744 getAddressingMode(LI->getOperand(0), AM);
2746 addFullAddress(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op0r), AM);
2751 if (LoadInst *LI = dyn_cast<LoadInst>(Op0))
2752 if (isSafeToFoldLoadIntoInstruction(*LI, I)) {
2753 const Type *Ty = Op0->getType();
2754 assert(Ty == Type::FloatTy||Ty == Type::DoubleTy && "Unknown FP type!");
2755 unsigned Opcode = Ty == Type::FloatTy ? X86::FDIVR32m : X86::FDIVR64m;
2757 unsigned Op1r = getReg(Op1);
2758 if (AllocaInst *AI = dyn_castFixedAlloca(LI->getOperand(0))) {
2759 unsigned FI = getFixedSizedAllocaFI(AI);
2760 addFrameReference(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op1r), FI);
2763 getAddressingMode(LI->getOperand(0), AM);
2764 addFullAddress(BuildMI(BB, Opcode, 5, ResultReg).addReg(Op1r), AM);
2771 MachineBasicBlock::iterator IP = BB->end();
2772 emitDivRemOperation(BB, IP, Op0, Op1,
2773 I.getOpcode() == Instruction::Div, ResultReg);
2776 void X86ISel::emitDivRemOperation(MachineBasicBlock *BB,
2777 MachineBasicBlock::iterator IP,
2778 Value *Op0, Value *Op1, bool isDiv,
2779 unsigned ResultReg) {
2780 const Type *Ty = Op0->getType();
2781 unsigned Class = getClass(Ty);
2783 case cFP: // Floating point divide
2785 emitBinaryFPOperation(BB, IP, Op0, Op1, 3, ResultReg);
2787 } else { // Floating point remainder...
2788 unsigned Op0Reg = getReg(Op0, BB, IP);
2789 unsigned Op1Reg = getReg(Op1, BB, IP);
2790 MachineInstr *TheCall =
2791 BuildMI(X86::CALLpcrel32, 1).addExternalSymbol("fmod", true);
2792 std::vector<ValueRecord> Args;
2793 Args.push_back(ValueRecord(Op0Reg, Type::DoubleTy));
2794 Args.push_back(ValueRecord(Op1Reg, Type::DoubleTy));
2795 doCall(ValueRecord(ResultReg, Type::DoubleTy), TheCall, Args);
2799 static const char *FnName[] =
2800 { "__moddi3", "__divdi3", "__umoddi3", "__udivdi3" };
2801 unsigned Op0Reg = getReg(Op0, BB, IP);
2802 unsigned Op1Reg = getReg(Op1, BB, IP);
2803 unsigned NameIdx = Ty->isUnsigned()*2 + isDiv;
2804 MachineInstr *TheCall =
2805 BuildMI(X86::CALLpcrel32, 1).addExternalSymbol(FnName[NameIdx], true);
2807 std::vector<ValueRecord> Args;
2808 Args.push_back(ValueRecord(Op0Reg, Type::LongTy));
2809 Args.push_back(ValueRecord(Op1Reg, Type::LongTy));
2810 doCall(ValueRecord(ResultReg, Type::LongTy), TheCall, Args);
2813 case cByte: case cShort: case cInt:
2814 break; // Small integrals, handled below...
2815 default: assert(0 && "Unknown class!");
2818 static const unsigned MovOpcode[]={ X86::MOV8rr, X86::MOV16rr, X86::MOV32rr };
2819 static const unsigned NEGOpcode[]={ X86::NEG8r, X86::NEG16r, X86::NEG32r };
2820 static const unsigned SAROpcode[]={ X86::SAR8ri, X86::SAR16ri, X86::SAR32ri };
2821 static const unsigned SHROpcode[]={ X86::SHR8ri, X86::SHR16ri, X86::SHR32ri };
2822 static const unsigned ADDOpcode[]={ X86::ADD8rr, X86::ADD16rr, X86::ADD32rr };
2824 // Special case signed division by power of 2.
2825 if (ConstantSInt *CI = dyn_cast<ConstantSInt>(Op1))
2827 assert(Class != cLong && "This doesn't handle 64-bit divides!");
2828 int V = CI->getValue();
2830 if (V == 1) { // X /s 1 => X
2831 unsigned Op0Reg = getReg(Op0, BB, IP);
2832 BuildMI(*BB, IP, MovOpcode[Class], 1, ResultReg).addReg(Op0Reg);
2836 if (V == -1) { // X /s -1 => -X
2837 unsigned Op0Reg = getReg(Op0, BB, IP);
2838 BuildMI(*BB, IP, NEGOpcode[Class], 1, ResultReg).addReg(Op0Reg);
2842 if (V == 2 || V == -2) { // X /s 2
2843 static const unsigned CMPOpcode[] = {
2844 X86::CMP8ri, X86::CMP16ri, X86::CMP32ri
2846 static const unsigned SBBOpcode[] = {
2847 X86::SBB8ri, X86::SBB16ri, X86::SBB32ri
2849 unsigned Op0Reg = getReg(Op0, BB, IP);
2850 unsigned SignBit = 1 << (CI->getType()->getPrimitiveSize()*8-1);
2851 BuildMI(*BB, IP, CMPOpcode[Class], 2).addReg(Op0Reg).addImm(SignBit);
2853 unsigned TmpReg = makeAnotherReg(Op0->getType());
2854 BuildMI(*BB, IP, SBBOpcode[Class], 2, TmpReg).addReg(Op0Reg).addImm(-1);
2856 unsigned TmpReg2 = V == 2 ? ResultReg : makeAnotherReg(Op0->getType());
2857 BuildMI(*BB, IP, SAROpcode[Class], 2, TmpReg2).addReg(TmpReg).addImm(1);
2859 BuildMI(*BB, IP, NEGOpcode[Class], 1, ResultReg).addReg(TmpReg2);
2865 if (V < 0) { // Not a positive power of 2?
2867 isNeg = true; // Maybe it's a negative power of 2.
2869 if (unsigned Log = ExactLog2(V)) {
2871 unsigned Op0Reg = getReg(Op0, BB, IP);
2872 unsigned TmpReg = makeAnotherReg(Op0->getType());
2873 BuildMI(*BB, IP, SAROpcode[Class], 2, TmpReg)
2874 .addReg(Op0Reg).addImm(Log-1);
2875 unsigned TmpReg2 = makeAnotherReg(Op0->getType());
2876 BuildMI(*BB, IP, SHROpcode[Class], 2, TmpReg2)
2877 .addReg(TmpReg).addImm(32-Log);
2878 unsigned TmpReg3 = makeAnotherReg(Op0->getType());
2879 BuildMI(*BB, IP, ADDOpcode[Class], 2, TmpReg3)
2880 .addReg(Op0Reg).addReg(TmpReg2);
2882 unsigned TmpReg4 = isNeg ? makeAnotherReg(Op0->getType()) : ResultReg;
2883 BuildMI(*BB, IP, SAROpcode[Class], 2, TmpReg4)
2884 .addReg(TmpReg3).addImm(Log);
2886 BuildMI(*BB, IP, NEGOpcode[Class], 1, ResultReg).addReg(TmpReg4);
2890 assert(Class != cLong && "This doesn't handle 64-bit remainder!");
2891 int V = CI->getValue();
2893 if (V == 2 || V == -2) { // X % 2, X % -2
2894 static const unsigned SExtOpcode[] = { X86::CBW, X86::CWD, X86::CDQ };
2895 static const unsigned BaseReg[] = { X86::AL , X86::AX , X86::EAX };
2896 static const unsigned SExtReg[] = { X86::AH , X86::DX , X86::EDX };
2897 static const unsigned ANDOpcode[] = {
2898 X86::AND8ri, X86::AND16ri, X86::AND32ri
2900 static const unsigned XOROpcode[] = {
2901 X86::XOR8rr, X86::XOR16rr, X86::XOR32rr
2903 static const unsigned SUBOpcode[] = {
2904 X86::SUB8rr, X86::SUB16rr, X86::SUB32rr
2907 // Sign extend result into reg of -1 or 0.
2908 unsigned Op0Reg = getReg(Op0, BB, IP);
2909 BuildMI(*BB, IP, MovOpcode[Class], 1, BaseReg[Class]).addReg(Op0Reg);
2910 BuildMI(*BB, IP, SExtOpcode[Class], 0);
2911 unsigned TmpReg0 = makeAnotherReg(Op0->getType());
2912 BuildMI(*BB, IP, MovOpcode[Class], 1, TmpReg0).addReg(SExtReg[Class]);
2914 unsigned TmpReg1 = makeAnotherReg(Op0->getType());
2915 BuildMI(*BB, IP, ANDOpcode[Class], 2, TmpReg1).addReg(Op0Reg).addImm(1);
2917 unsigned TmpReg2 = makeAnotherReg(Op0->getType());
2918 BuildMI(*BB, IP, XOROpcode[Class], 2,
2919 TmpReg2).addReg(TmpReg1).addReg(TmpReg0);
2920 BuildMI(*BB, IP, SUBOpcode[Class], 2,
2921 ResultReg).addReg(TmpReg2).addReg(TmpReg0);
2926 static const unsigned Regs[] ={ X86::AL , X86::AX , X86::EAX };
2927 static const unsigned ClrOpcode[]={ X86::MOV8ri, X86::MOV16ri, X86::MOV32ri };
2928 static const unsigned ExtRegs[] ={ X86::AH , X86::DX , X86::EDX };
2929 static const unsigned SExOpcode[]={ X86::CBW , X86::CWD , X86::CDQ };
2931 static const unsigned DivOpcode[][4] = {
2932 { X86::DIV8r , X86::DIV16r , X86::DIV32r , 0 }, // Unsigned division
2933 { X86::IDIV8r, X86::IDIV16r, X86::IDIV32r, 0 }, // Signed division
2936 unsigned Reg = Regs[Class];
2937 unsigned ExtReg = ExtRegs[Class];
2939 // Put the first operand into one of the A registers...
2940 unsigned Op0Reg = getReg(Op0, BB, IP);
2941 unsigned Op1Reg = getReg(Op1, BB, IP);
2942 BuildMI(*BB, IP, MovOpcode[Class], 1, Reg).addReg(Op0Reg);
2944 if (Ty->isSigned()) {
2945 // Emit a sign extension instruction.
2946 BuildMI(*BB, IP, SExOpcode[Class], 0);
2948 // Emit the appropriate divide or remainder instruction...
2949 BuildMI(*BB, IP, DivOpcode[1][Class], 1).addReg(Op1Reg);
2951 // If unsigned, emit a zeroing instruction... (reg = 0)
2952 BuildMI(*BB, IP, ClrOpcode[Class], 2, ExtReg).addImm(0);
2954 // Emit the appropriate divide or remainder instruction...
2955 BuildMI(*BB, IP, DivOpcode[0][Class], 1).addReg(Op1Reg);
2958 // Figure out which register we want to pick the result out of...
2959 unsigned DestReg = isDiv ? Reg : ExtReg;
2961 // Put the result into the destination register...
2962 BuildMI(*BB, IP, MovOpcode[Class], 1, ResultReg).addReg(DestReg);
2966 /// Shift instructions: 'shl', 'sar', 'shr' - Some special cases here
2967 /// for constant immediate shift values, and for constant immediate
2968 /// shift values equal to 1. Even the general case is sort of special,
2969 /// because the shift amount has to be in CL, not just any old register.
2971 void X86ISel::visitShiftInst(ShiftInst &I) {
2972 MachineBasicBlock::iterator IP = BB->end ();
2973 emitShiftOperation (BB, IP, I.getOperand (0), I.getOperand (1),
2974 I.getOpcode () == Instruction::Shl, I.getType (),
2978 /// Emit code for a 'SHLD DestReg, Op0, Op1, Amt' operation, where Amt is a
2980 void X86ISel::doSHLDConst(MachineBasicBlock *MBB,
2981 MachineBasicBlock::iterator IP,
2982 unsigned DestReg, unsigned Op0Reg, unsigned Op1Reg,
2984 // SHLD is a very inefficient operation on every processor, try to do
2985 // somethign simpler for common values of 'Amt'.
2987 BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg).addReg(Op0Reg);
2988 } else if (Amt == 1) {
2989 unsigned Tmp = makeAnotherReg(Type::UIntTy);
2990 BuildMI(*MBB, IP, X86::ADD32rr, 2, Tmp).addReg(Op1Reg).addReg(Op1Reg);
2991 BuildMI(*MBB, IP, X86::ADC32rr, 2, DestReg).addReg(Op0Reg).addReg(Op0Reg);
2992 } else if (Amt == 2 || Amt == 3) {
2993 // On the P4 and Athlon it is cheaper to replace shld ..., 2|3 with a
2994 // shift/lea pair. NOTE: This should not be done on the P6 family!
2995 unsigned Tmp = makeAnotherReg(Type::UIntTy);
2996 BuildMI(*MBB, IP, X86::SHR32ri, 2, Tmp).addReg(Op1Reg).addImm(32-Amt);
2998 AM.BaseType = X86AddressMode::RegBase;
3000 AM.Scale = 1 << Amt;
3001 AM.IndexReg = Op0Reg;
3003 addFullAddress(BuildMI(*MBB, IP, X86::LEA32r, 4, DestReg), AM);
3005 // NOTE: It is always cheaper on the P4 to emit SHLD as two shifts and an OR
3006 // than it is to emit a real SHLD.
3008 BuildMI(*MBB, IP, X86::SHLD32rri8, 3,
3009 DestReg).addReg(Op0Reg).addReg(Op1Reg).addImm(Amt);
3013 /// emitShiftOperation - Common code shared between visitShiftInst and
3014 /// constant expression support.
3015 void X86ISel::emitShiftOperation(MachineBasicBlock *MBB,
3016 MachineBasicBlock::iterator IP,
3017 Value *Op, Value *ShiftAmount,
3018 bool isLeftShift, const Type *ResultTy,
3020 unsigned SrcReg = getReg (Op, MBB, IP);
3021 bool isSigned = ResultTy->isSigned ();
3022 unsigned Class = getClass (ResultTy);
3024 static const unsigned ConstantOperand[][3] = {
3025 { X86::SHR8ri, X86::SHR16ri, X86::SHR32ri }, // SHR
3026 { X86::SAR8ri, X86::SAR16ri, X86::SAR32ri }, // SAR
3027 { X86::SHL8ri, X86::SHL16ri, X86::SHL32ri }, // SHL
3028 { X86::SHL8ri, X86::SHL16ri, X86::SHL32ri }, // SAL = SHL
3031 static const unsigned NonConstantOperand[][3] = {
3032 { X86::SHR8rCL, X86::SHR16rCL, X86::SHR32rCL }, // SHR
3033 { X86::SAR8rCL, X86::SAR16rCL, X86::SAR32rCL }, // SAR
3034 { X86::SHL8rCL, X86::SHL16rCL, X86::SHL32rCL }, // SHL
3035 { X86::SHL8rCL, X86::SHL16rCL, X86::SHL32rCL }, // SAL = SHL
3038 // Longs, as usual, are handled specially.
3039 if (Class == cLong) {
3040 if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(ShiftAmount)) {
3041 unsigned Amount = CUI->getValue();
3042 if (Amount == 1 && isLeftShift) { // X << 1 == X+X
3043 BuildMI(*MBB, IP, X86::ADD32rr, 2,
3044 DestReg).addReg(SrcReg).addReg(SrcReg);
3045 BuildMI(*MBB, IP, X86::ADC32rr, 2,
3046 DestReg+1).addReg(SrcReg+1).addReg(SrcReg+1);
3047 } else if (Amount < 32) {
3048 const unsigned *Opc = ConstantOperand[isLeftShift*2+isSigned];
3050 doSHLDConst(MBB, IP, DestReg+1, SrcReg+1, SrcReg, Amount);
3051 BuildMI(*MBB, IP, Opc[2], 2, DestReg).addReg(SrcReg).addImm(Amount);
3053 BuildMI(*MBB, IP, X86::SHRD32rri8, 3,
3054 DestReg).addReg(SrcReg ).addReg(SrcReg+1).addImm(Amount);
3055 BuildMI(*MBB, IP, Opc[2],2,DestReg+1).addReg(SrcReg+1).addImm(Amount);
3057 } else if (Amount == 32) {
3059 BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg+1).addReg(SrcReg);
3060 BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg).addImm(0);
3062 BuildMI(*MBB, IP, X86::MOV32rr, 1, DestReg).addReg(SrcReg+1);
3064 BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg+1).addImm(0);
3066 BuildMI(*MBB, IP, X86::SAR32ri, 2,
3067 DestReg+1).addReg(SrcReg).addImm(31);
3070 } else { // Shifting more than 32 bits
3073 BuildMI(*MBB, IP, X86::SHL32ri, 2,
3074 DestReg + 1).addReg(SrcReg).addImm(Amount);
3075 BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg).addImm(0);
3077 BuildMI(*MBB, IP, isSigned ? X86::SAR32ri : X86::SHR32ri, 2,
3078 DestReg).addReg(SrcReg+1).addImm(Amount);
3079 BuildMI(*MBB, IP, X86::MOV32ri, 1, DestReg+1).addImm(0);
3083 unsigned TmpReg = makeAnotherReg(Type::IntTy);
3084 if (!isLeftShift && isSigned) {
3085 // If this is a SHR of a Long, then we need to do funny sign extension
3086 // stuff. TmpReg gets the value to use as the high-part if we are
3087 // shifting more than 32 bits.
3088 BuildMI(*MBB, IP, X86::SAR32ri, 2, TmpReg).addReg(SrcReg).addImm(31);
3090 // Other shifts use a fixed zero value if the shift is more than 32
3092 BuildMI(*MBB, IP, X86::MOV32ri, 1, TmpReg).addImm(0);
3095 // Initialize CL with the shift amount...
3096 unsigned ShiftAmountReg = getReg(ShiftAmount, MBB, IP);
3097 BuildMI(*MBB, IP, X86::MOV8rr, 1, X86::CL).addReg(ShiftAmountReg);
3099 unsigned TmpReg2 = makeAnotherReg(Type::IntTy);
3100 unsigned TmpReg3 = makeAnotherReg(Type::IntTy);
3102 // TmpReg2 = shld inHi, inLo
3103 BuildMI(*MBB, IP, X86::SHLD32rrCL,2,TmpReg2).addReg(SrcReg+1)
3105 // TmpReg3 = shl inLo, CL
3106 BuildMI(*MBB, IP, X86::SHL32rCL, 1, TmpReg3).addReg(SrcReg);
3108 // Set the flags to indicate whether the shift was by more than 32 bits.
3109 BuildMI(*MBB, IP, X86::TEST8ri, 2).addReg(X86::CL).addImm(32);
3111 // DestHi = (>32) ? TmpReg3 : TmpReg2;
3112 BuildMI(*MBB, IP, X86::CMOVNE32rr, 2,
3113 DestReg+1).addReg(TmpReg2).addReg(TmpReg3);
3114 // DestLo = (>32) ? TmpReg : TmpReg3;
3115 BuildMI(*MBB, IP, X86::CMOVNE32rr, 2,
3116 DestReg).addReg(TmpReg3).addReg(TmpReg);
3118 // TmpReg2 = shrd inLo, inHi
3119 BuildMI(*MBB, IP, X86::SHRD32rrCL,2,TmpReg2).addReg(SrcReg)
3121 // TmpReg3 = s[ah]r inHi, CL
3122 BuildMI(*MBB, IP, isSigned ? X86::SAR32rCL : X86::SHR32rCL, 1, TmpReg3)
3125 // Set the flags to indicate whether the shift was by more than 32 bits.
3126 BuildMI(*MBB, IP, X86::TEST8ri, 2).addReg(X86::CL).addImm(32);
3128 // DestLo = (>32) ? TmpReg3 : TmpReg2;
3129 BuildMI(*MBB, IP, X86::CMOVNE32rr, 2,
3130 DestReg).addReg(TmpReg2).addReg(TmpReg3);
3132 // DestHi = (>32) ? TmpReg : TmpReg3;
3133 BuildMI(*MBB, IP, X86::CMOVNE32rr, 2,
3134 DestReg+1).addReg(TmpReg3).addReg(TmpReg);
3140 if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(ShiftAmount)) {
3141 // The shift amount is constant, guaranteed to be a ubyte. Get its value.
3142 assert(CUI->getType() == Type::UByteTy && "Shift amount not a ubyte?");
3144 if (CUI->getValue() == 1 && isLeftShift) { // X << 1 -> X+X
3145 static const int AddOpC[] = { X86::ADD8rr, X86::ADD16rr, X86::ADD32rr };
3146 BuildMI(*MBB, IP, AddOpC[Class], 2,DestReg).addReg(SrcReg).addReg(SrcReg);
3148 const unsigned *Opc = ConstantOperand[isLeftShift*2+isSigned];
3149 BuildMI(*MBB, IP, Opc[Class], 2,
3150 DestReg).addReg(SrcReg).addImm(CUI->getValue());
3152 } else { // The shift amount is non-constant.
3153 unsigned ShiftAmountReg = getReg (ShiftAmount, MBB, IP);
3154 BuildMI(*MBB, IP, X86::MOV8rr, 1, X86::CL).addReg(ShiftAmountReg);
3156 const unsigned *Opc = NonConstantOperand[isLeftShift*2+isSigned];
3157 BuildMI(*MBB, IP, Opc[Class], 1, DestReg).addReg(SrcReg);
3162 /// visitLoadInst - Implement LLVM load instructions in terms of the x86 'mov'
3163 /// instruction. The load and store instructions are the only place where we
3164 /// need to worry about the memory layout of the target machine.
3166 void X86ISel::visitLoadInst(LoadInst &I) {
3167 // Check to see if this load instruction is going to be folded into a binary
3168 // instruction, like add. If so, we don't want to emit it. Wouldn't a real
3169 // pattern matching instruction selector be nice?
3170 unsigned Class = getClassB(I.getType());
3171 if (I.hasOneUse()) {
3172 Instruction *User = cast<Instruction>(I.use_back());
3173 switch (User->getOpcode()) {
3174 case Instruction::Cast:
3175 // If this is a cast from a signed-integer type to a floating point type,
3176 // fold the cast here.
3177 if (getClassB(User->getType()) == cFP &&
3178 (I.getType() == Type::ShortTy || I.getType() == Type::IntTy ||
3179 I.getType() == Type::LongTy)) {
3180 unsigned DestReg = getReg(User);
3181 static const unsigned Opcode[] = {
3182 0/*BYTE*/, X86::FILD16m, X86::FILD32m, 0/*FP*/, X86::FILD64m
3185 if (AllocaInst *AI = dyn_castFixedAlloca(I.getOperand(0))) {
3186 unsigned FI = getFixedSizedAllocaFI(AI);
3187 addFrameReference(BuildMI(BB, Opcode[Class], 4, DestReg), FI);
3190 getAddressingMode(I.getOperand(0), AM);
3191 addFullAddress(BuildMI(BB, Opcode[Class], 4, DestReg), AM);
3199 case Instruction::Add:
3200 case Instruction::Sub:
3201 case Instruction::And:
3202 case Instruction::Or:
3203 case Instruction::Xor:
3204 if (Class == cLong) User = 0;
3206 case Instruction::Mul:
3207 case Instruction::Div:
3208 if (Class != cFP) User = 0;
3209 break; // Folding only implemented for floating point.
3210 default: User = 0; break;
3214 // Okay, we found a user. If the load is the first operand and there is
3215 // no second operand load, reverse the operand ordering. Note that this
3216 // can fail for a subtract (ie, no change will be made).
3217 bool Swapped = false;
3218 if (!isa<LoadInst>(User->getOperand(1)))
3219 Swapped = !cast<BinaryOperator>(User)->swapOperands();
3221 // Okay, now that everything is set up, if this load is used by the second
3222 // operand, and if there are no instructions that invalidate the load
3223 // before the binary operator, eliminate the load.
3224 if (User->getOperand(1) == &I &&
3225 isSafeToFoldLoadIntoInstruction(I, *User))
3226 return; // Eliminate the load!
3228 // If this is a floating point sub or div, we won't be able to swap the
3229 // operands, but we will still be able to eliminate the load.
3230 if (Class == cFP && User->getOperand(0) == &I &&
3231 !isa<LoadInst>(User->getOperand(1)) &&
3232 (User->getOpcode() == Instruction::Sub ||
3233 User->getOpcode() == Instruction::Div) &&
3234 isSafeToFoldLoadIntoInstruction(I, *User))
3235 return; // Eliminate the load!
3237 // If we swapped the operands to the instruction, but couldn't fold the
3238 // load anyway, swap them back. We don't want to break add X, int
3240 if (Swapped) cast<BinaryOperator>(User)->swapOperands();
3244 static const unsigned Opcodes[] = {
3245 X86::MOV8rm, X86::MOV16rm, X86::MOV32rm, X86::FLD32m, X86::MOV32rm
3247 unsigned Opcode = Opcodes[Class];
3248 if (I.getType() == Type::DoubleTy) Opcode = X86::FLD64m;
3250 unsigned DestReg = getReg(I);
3252 if (AllocaInst *AI = dyn_castFixedAlloca(I.getOperand(0))) {
3253 unsigned FI = getFixedSizedAllocaFI(AI);
3254 if (Class == cLong) {
3255 addFrameReference(BuildMI(BB, X86::MOV32rm, 4, DestReg), FI);
3256 addFrameReference(BuildMI(BB, X86::MOV32rm, 4, DestReg+1), FI, 4);
3258 addFrameReference(BuildMI(BB, Opcode, 4, DestReg), FI);
3262 getAddressingMode(I.getOperand(0), AM);
3264 if (Class == cLong) {
3265 addFullAddress(BuildMI(BB, X86::MOV32rm, 4, DestReg), AM);
3267 addFullAddress(BuildMI(BB, X86::MOV32rm, 4, DestReg+1), AM);
3269 addFullAddress(BuildMI(BB, Opcode, 4, DestReg), AM);
3274 /// visitStoreInst - Implement LLVM store instructions in terms of the x86 'mov'
3277 void X86ISel::visitStoreInst(StoreInst &I) {
3279 getAddressingMode(I.getOperand(1), AM);
3281 const Type *ValTy = I.getOperand(0)->getType();
3282 unsigned Class = getClassB(ValTy);
3284 if (ConstantInt *CI = dyn_cast<ConstantInt>(I.getOperand(0))) {
3285 uint64_t Val = CI->getRawValue();
3286 if (Class == cLong) {
3287 addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(Val & ~0U);
3289 addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(Val>>32);
3291 static const unsigned Opcodes[] = {
3292 X86::MOV8mi, X86::MOV16mi, X86::MOV32mi
3294 unsigned Opcode = Opcodes[Class];
3295 addFullAddress(BuildMI(BB, Opcode, 5), AM).addImm(Val);
3297 } else if (isa<ConstantPointerNull>(I.getOperand(0))) {
3298 addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(0);
3299 } else if (ConstantBool *CB = dyn_cast<ConstantBool>(I.getOperand(0))) {
3300 addFullAddress(BuildMI(BB, X86::MOV8mi, 5), AM).addImm(CB->getValue());
3301 } else if (ConstantFP *CFP = dyn_cast<ConstantFP>(I.getOperand(0))) {
3302 // Store constant FP values with integer instructions to avoid having to
3303 // load the constants from the constant pool then do a store.
3304 if (CFP->getType() == Type::FloatTy) {
3309 V.F = CFP->getValue();
3310 addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(V.I);
3316 V.F = CFP->getValue();
3317 addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm((unsigned)V.I);
3319 addFullAddress(BuildMI(BB, X86::MOV32mi, 5), AM).addImm(
3320 unsigned(V.I >> 32));
3323 } else if (Class == cLong) {
3324 unsigned ValReg = getReg(I.getOperand(0));
3325 addFullAddress(BuildMI(BB, X86::MOV32mr, 5), AM).addReg(ValReg);
3327 addFullAddress(BuildMI(BB, X86::MOV32mr, 5), AM).addReg(ValReg+1);
3329 // FIXME: stop emitting these two instructions:
3330 // movl $global,%eax
3332 // when one instruction will suffice. That includes when the global
3333 // has an offset applied to it.
3334 unsigned ValReg = getReg(I.getOperand(0));
3335 static const unsigned Opcodes[] = {
3336 X86::MOV8mr, X86::MOV16mr, X86::MOV32mr, X86::FST32m
3338 unsigned Opcode = Opcodes[Class];
3339 if (ValTy == Type::DoubleTy) Opcode = X86::FST64m;
3341 addFullAddress(BuildMI(BB, Opcode, 1+4), AM).addReg(ValReg);
3346 /// visitCastInst - Here we have various kinds of copying with or without sign
3347 /// extension going on.
3349 void X86ISel::visitCastInst(CastInst &CI) {
3350 Value *Op = CI.getOperand(0);
3352 unsigned SrcClass = getClassB(Op->getType());
3353 unsigned DestClass = getClassB(CI.getType());
3354 // Noop casts are not emitted: getReg will return the source operand as the
3355 // register to use for any uses of the noop cast.
3356 if (DestClass == SrcClass) {
3357 // The only detail in this plan is that casts from double -> float are
3358 // truncating operations that we have to codegen through memory (despite
3359 // the fact that the source/dest registers are the same class).
3360 if (CI.getType() != Type::FloatTy || Op->getType() != Type::DoubleTy)
3364 // If this is a cast from a 32-bit integer to a Long type, and the only uses
3365 // of the case are GEP instructions, then the cast does not need to be
3366 // generated explicitly, it will be folded into the GEP.
3367 if (DestClass == cLong && SrcClass == cInt) {
3368 bool AllUsesAreGEPs = true;
3369 for (Value::use_iterator I = CI.use_begin(), E = CI.use_end(); I != E; ++I)
3370 if (!isa<GetElementPtrInst>(*I)) {
3371 AllUsesAreGEPs = false;
3375 // No need to codegen this cast if all users are getelementptr instrs...
3376 if (AllUsesAreGEPs) return;
3379 // If this cast converts a load from a short,int, or long integer to a FP
3380 // value, we will have folded this cast away.
3381 if (DestClass == cFP && isa<LoadInst>(Op) && Op->hasOneUse() &&
3382 (Op->getType() == Type::ShortTy || Op->getType() == Type::IntTy ||
3383 Op->getType() == Type::LongTy))
3387 unsigned DestReg = getReg(CI);
3388 MachineBasicBlock::iterator MI = BB->end();
3389 emitCastOperation(BB, MI, Op, CI.getType(), DestReg);
3392 /// emitCastOperation - Common code shared between visitCastInst and constant
3393 /// expression cast support.
3395 void X86ISel::emitCastOperation(MachineBasicBlock *BB,
3396 MachineBasicBlock::iterator IP,
3397 Value *Src, const Type *DestTy,
3399 const Type *SrcTy = Src->getType();
3400 unsigned SrcClass = getClassB(SrcTy);
3401 unsigned DestClass = getClassB(DestTy);
3402 unsigned SrcReg = getReg(Src, BB, IP);
3404 // Implement casts to bool by using compare on the operand followed by set if
3405 // not zero on the result.
3406 if (DestTy == Type::BoolTy) {
3409 BuildMI(*BB, IP, X86::TEST8rr, 2).addReg(SrcReg).addReg(SrcReg);
3412 BuildMI(*BB, IP, X86::TEST16rr, 2).addReg(SrcReg).addReg(SrcReg);
3415 BuildMI(*BB, IP, X86::TEST32rr, 2).addReg(SrcReg).addReg(SrcReg);
3418 unsigned TmpReg = makeAnotherReg(Type::IntTy);
3419 BuildMI(*BB, IP, X86::OR32rr, 2, TmpReg).addReg(SrcReg).addReg(SrcReg+1);
3423 BuildMI(*BB, IP, X86::FTST, 1).addReg(SrcReg);
3424 BuildMI(*BB, IP, X86::FNSTSW8r, 0);
3425 BuildMI(*BB, IP, X86::SAHF, 1);
3429 // If the zero flag is not set, then the value is true, set the byte to
3431 BuildMI(*BB, IP, X86::SETNEr, 1, DestReg);
3435 static const unsigned RegRegMove[] = {
3436 X86::MOV8rr, X86::MOV16rr, X86::MOV32rr, X86::FpMOV, X86::MOV32rr
3439 // Implement casts between values of the same type class (as determined by
3440 // getClass) by using a register-to-register move.
3441 if (SrcClass == DestClass) {
3442 if (SrcClass <= cInt || (SrcClass == cFP && SrcTy == DestTy)) {
3443 BuildMI(*BB, IP, RegRegMove[SrcClass], 1, DestReg).addReg(SrcReg);
3444 } else if (SrcClass == cFP) {
3445 if (SrcTy == Type::FloatTy) { // double -> float
3446 assert(DestTy == Type::DoubleTy && "Unknown cFP member!");
3447 BuildMI(*BB, IP, X86::FpMOV, 1, DestReg).addReg(SrcReg);
3448 } else { // float -> double
3449 assert(SrcTy == Type::DoubleTy && DestTy == Type::FloatTy &&
3450 "Unknown cFP member!");
3451 // Truncate from double to float by storing to memory as short, then
3453 unsigned FltAlign = TM.getTargetData().getFloatAlignment();
3454 int FrameIdx = F->getFrameInfo()->CreateStackObject(4, FltAlign);
3455 addFrameReference(BuildMI(*BB, IP, X86::FST32m, 5),
3456 FrameIdx).addReg(SrcReg);
3457 addFrameReference(BuildMI(*BB, IP, X86::FLD32m, 5, DestReg), FrameIdx);
3459 } else if (SrcClass == cLong) {
3460 BuildMI(*BB, IP, X86::MOV32rr, 1, DestReg).addReg(SrcReg);
3461 BuildMI(*BB, IP, X86::MOV32rr, 1, DestReg+1).addReg(SrcReg+1);
3463 assert(0 && "Cannot handle this type of cast instruction!");
3469 // Handle cast of SMALLER int to LARGER int using a move with sign extension
3470 // or zero extension, depending on whether the source type was signed.
3471 if (SrcClass <= cInt && (DestClass <= cInt || DestClass == cLong) &&
3472 SrcClass < DestClass) {
3473 bool isLong = DestClass == cLong;
3474 if (isLong) DestClass = cInt;
3476 static const unsigned Opc[][4] = {
3477 { X86::MOVSX16rr8, X86::MOVSX32rr8, X86::MOVSX32rr16, X86::MOV32rr }, // s
3478 { X86::MOVZX16rr8, X86::MOVZX32rr8, X86::MOVZX32rr16, X86::MOV32rr } // u
3481 bool isUnsigned = SrcTy->isUnsigned() || SrcTy == Type::BoolTy;
3482 BuildMI(*BB, IP, Opc[isUnsigned][SrcClass + DestClass - 1], 1,
3483 DestReg).addReg(SrcReg);
3485 if (isLong) { // Handle upper 32 bits as appropriate...
3486 if (isUnsigned) // Zero out top bits...
3487 BuildMI(*BB, IP, X86::MOV32ri, 1, DestReg+1).addImm(0);
3488 else // Sign extend bottom half...
3489 BuildMI(*BB, IP, X86::SAR32ri, 2, DestReg+1).addReg(DestReg).addImm(31);
3494 // Special case long -> int ...
3495 if (SrcClass == cLong && DestClass == cInt) {
3496 BuildMI(*BB, IP, X86::MOV32rr, 1, DestReg).addReg(SrcReg);
3500 // Handle cast of LARGER int to SMALLER int using a move to EAX followed by a
3501 // move out of AX or AL.
3502 if ((SrcClass <= cInt || SrcClass == cLong) && DestClass <= cInt
3503 && SrcClass > DestClass) {
3504 static const unsigned AReg[] = { X86::AL, X86::AX, X86::EAX, 0, X86::EAX };
3505 BuildMI(*BB, IP, RegRegMove[SrcClass], 1, AReg[SrcClass]).addReg(SrcReg);
3506 BuildMI(*BB, IP, RegRegMove[DestClass], 1, DestReg).addReg(AReg[DestClass]);
3510 // Handle casts from integer to floating point now...
3511 if (DestClass == cFP) {
3512 // Promote the integer to a type supported by FLD. We do this because there
3513 // are no unsigned FLD instructions, so we must promote an unsigned value to
3514 // a larger signed value, then use FLD on the larger value.
3516 const Type *PromoteType = 0;
3517 unsigned PromoteOpcode = 0;
3518 unsigned RealDestReg = DestReg;
3519 switch (SrcTy->getTypeID()) {
3520 case Type::BoolTyID:
3521 case Type::SByteTyID:
3522 // We don't have the facilities for directly loading byte sized data from
3523 // memory (even signed). Promote it to 16 bits.
3524 PromoteType = Type::ShortTy;
3525 PromoteOpcode = X86::MOVSX16rr8;
3527 case Type::UByteTyID:
3528 PromoteType = Type::ShortTy;
3529 PromoteOpcode = X86::MOVZX16rr8;
3531 case Type::UShortTyID:
3532 PromoteType = Type::IntTy;
3533 PromoteOpcode = X86::MOVZX32rr16;
3535 case Type::ULongTyID:
3536 case Type::UIntTyID:
3537 // Don't fild into the read destination.
3538 DestReg = makeAnotherReg(Type::DoubleTy);
3540 default: // No promotion needed...
3545 unsigned TmpReg = makeAnotherReg(PromoteType);
3546 BuildMI(*BB, IP, PromoteOpcode, 1, TmpReg).addReg(SrcReg);
3547 SrcTy = PromoteType;
3548 SrcClass = getClass(PromoteType);
3552 // Spill the integer to memory and reload it from there...
3554 F->getFrameInfo()->CreateStackObject(SrcTy, TM.getTargetData());
3556 if (SrcClass == cLong) {
3557 addFrameReference(BuildMI(*BB, IP, X86::MOV32mr, 5),
3558 FrameIdx).addReg(SrcReg);
3559 addFrameReference(BuildMI(*BB, IP, X86::MOV32mr, 5),
3560 FrameIdx, 4).addReg(SrcReg+1);
3562 static const unsigned Op1[] = { X86::MOV8mr, X86::MOV16mr, X86::MOV32mr };
3563 addFrameReference(BuildMI(*BB, IP, Op1[SrcClass], 5),
3564 FrameIdx).addReg(SrcReg);
3567 static const unsigned Op2[] =
3568 { 0/*byte*/, X86::FILD16m, X86::FILD32m, 0/*FP*/, X86::FILD64m };
3569 addFrameReference(BuildMI(*BB, IP, Op2[SrcClass], 5, DestReg), FrameIdx);
3571 if (SrcTy == Type::UIntTy) {
3572 // If this is a cast from uint -> double, we need to be careful about if
3573 // the "sign" bit is set. If so, we don't want to make a negative number,
3574 // we want to make a positive number. Emit code to add an offset if the
3577 // Compute whether the sign bit is set by shifting the reg right 31 bits.
3578 unsigned IsNeg = makeAnotherReg(Type::IntTy);
3579 BuildMI(*BB, IP, X86::SHR32ri, 2, IsNeg).addReg(SrcReg).addImm(31);
3581 // Create a CP value that has the offset in one word and 0 in the other.
3582 static ConstantInt *TheOffset = ConstantUInt::get(Type::ULongTy,
3583 0x4f80000000000000ULL);
3584 unsigned CPI = F->getConstantPool()->getConstantPoolIndex(TheOffset);
3585 BuildMI(*BB, IP, X86::FADD32m, 5, RealDestReg).addReg(DestReg)
3586 .addConstantPoolIndex(CPI).addZImm(4).addReg(IsNeg).addSImm(0);
3588 } else if (SrcTy == Type::ULongTy) {
3589 // We need special handling for unsigned 64-bit integer sources. If the
3590 // input number has the "sign bit" set, then we loaded it incorrectly as a
3591 // negative 64-bit number. In this case, add an offset value.
3593 // Emit a test instruction to see if the dynamic input value was signed.
3594 BuildMI(*BB, IP, X86::TEST32rr, 2).addReg(SrcReg+1).addReg(SrcReg+1);
3596 // If the sign bit is set, get a pointer to an offset, otherwise get a
3597 // pointer to a zero.
3598 MachineConstantPool *CP = F->getConstantPool();
3599 unsigned Zero = makeAnotherReg(Type::IntTy);
3600 Constant *Null = Constant::getNullValue(Type::UIntTy);
3601 addConstantPoolReference(BuildMI(*BB, IP, X86::LEA32r, 5, Zero),
3602 CP->getConstantPoolIndex(Null));
3603 unsigned Offset = makeAnotherReg(Type::IntTy);
3604 Constant *OffsetCst = ConstantUInt::get(Type::UIntTy, 0x5f800000);
3606 addConstantPoolReference(BuildMI(*BB, IP, X86::LEA32r, 5, Offset),
3607 CP->getConstantPoolIndex(OffsetCst));
3608 unsigned Addr = makeAnotherReg(Type::IntTy);
3609 BuildMI(*BB, IP, X86::CMOVS32rr, 2, Addr).addReg(Zero).addReg(Offset);
3611 // Load the constant for an add. FIXME: this could make an 'fadd' that
3612 // reads directly from memory, but we don't support these yet.
3613 unsigned ConstReg = makeAnotherReg(Type::DoubleTy);
3614 addDirectMem(BuildMI(*BB, IP, X86::FLD32m, 4, ConstReg), Addr);
3616 BuildMI(*BB, IP, X86::FpADD, 2, RealDestReg)
3617 .addReg(ConstReg).addReg(DestReg);
3623 // Handle casts from floating point to integer now...
3624 if (SrcClass == cFP) {
3625 // Change the floating point control register to use "round towards zero"
3626 // mode when truncating to an integer value.
3628 int CWFrameIdx = F->getFrameInfo()->CreateStackObject(2, 2);
3629 addFrameReference(BuildMI(*BB, IP, X86::FNSTCW16m, 4), CWFrameIdx);
3631 // Load the old value of the high byte of the control word...
3632 unsigned HighPartOfCW = makeAnotherReg(Type::UByteTy);
3633 addFrameReference(BuildMI(*BB, IP, X86::MOV8rm, 4, HighPartOfCW),
3636 // Set the high part to be round to zero...
3637 addFrameReference(BuildMI(*BB, IP, X86::MOV8mi, 5),
3638 CWFrameIdx, 1).addImm(12);
3640 // Reload the modified control word now...
3641 addFrameReference(BuildMI(*BB, IP, X86::FLDCW16m, 4), CWFrameIdx);
3643 // Restore the memory image of control word to original value
3644 addFrameReference(BuildMI(*BB, IP, X86::MOV8mr, 5),
3645 CWFrameIdx, 1).addReg(HighPartOfCW);
3647 // We don't have the facilities for directly storing byte sized data to
3648 // memory. Promote it to 16 bits. We also must promote unsigned values to
3649 // larger classes because we only have signed FP stores.
3650 unsigned StoreClass = DestClass;
3651 const Type *StoreTy = DestTy;
3652 if (StoreClass == cByte || DestTy->isUnsigned())
3653 switch (StoreClass) {
3654 case cByte: StoreTy = Type::ShortTy; StoreClass = cShort; break;
3655 case cShort: StoreTy = Type::IntTy; StoreClass = cInt; break;
3656 case cInt: StoreTy = Type::LongTy; StoreClass = cLong; break;
3657 // The following treatment of cLong may not be perfectly right,
3658 // but it survives chains of casts of the form
3659 // double->ulong->double.
3660 case cLong: StoreTy = Type::LongTy; StoreClass = cLong; break;
3661 default: assert(0 && "Unknown store class!");
3664 // Spill the integer to memory and reload it from there...
3666 F->getFrameInfo()->CreateStackObject(StoreTy, TM.getTargetData());
3668 static const unsigned Op1[] =
3669 { 0, X86::FIST16m, X86::FIST32m, 0, X86::FISTP64m };
3670 addFrameReference(BuildMI(*BB, IP, Op1[StoreClass], 5),
3671 FrameIdx).addReg(SrcReg);
3673 if (DestClass == cLong) {
3674 addFrameReference(BuildMI(*BB, IP, X86::MOV32rm, 4, DestReg), FrameIdx);
3675 addFrameReference(BuildMI(*BB, IP, X86::MOV32rm, 4, DestReg+1),
3678 static const unsigned Op2[] = { X86::MOV8rm, X86::MOV16rm, X86::MOV32rm };
3679 addFrameReference(BuildMI(*BB, IP, Op2[DestClass], 4, DestReg), FrameIdx);
3682 // Reload the original control word now...
3683 addFrameReference(BuildMI(*BB, IP, X86::FLDCW16m, 4), CWFrameIdx);
3687 // Anything we haven't handled already, we can't (yet) handle at all.
3688 assert(0 && "Unhandled cast instruction!");
3692 /// visitVANextInst - Implement the va_next instruction...
3694 void X86ISel::visitVANextInst(VANextInst &I) {
3695 unsigned VAList = getReg(I.getOperand(0));
3696 unsigned DestReg = getReg(I);
3699 switch (I.getArgType()->getTypeID()) {
3702 assert(0 && "Error: bad type for va_next instruction!");
3704 case Type::PointerTyID:
3705 case Type::UIntTyID:
3709 case Type::ULongTyID:
3710 case Type::LongTyID:
3711 case Type::DoubleTyID:
3716 // Increment the VAList pointer...
3717 BuildMI(BB, X86::ADD32ri, 2, DestReg).addReg(VAList).addImm(Size);
3720 void X86ISel::visitVAArgInst(VAArgInst &I) {
3721 unsigned VAList = getReg(I.getOperand(0));
3722 unsigned DestReg = getReg(I);
3724 switch (I.getType()->getTypeID()) {
3727 assert(0 && "Error: bad type for va_next instruction!");
3729 case Type::PointerTyID:
3730 case Type::UIntTyID:
3732 addDirectMem(BuildMI(BB, X86::MOV32rm, 4, DestReg), VAList);
3734 case Type::ULongTyID:
3735 case Type::LongTyID:
3736 addDirectMem(BuildMI(BB, X86::MOV32rm, 4, DestReg), VAList);
3737 addRegOffset(BuildMI(BB, X86::MOV32rm, 4, DestReg+1), VAList, 4);
3739 case Type::DoubleTyID:
3740 addDirectMem(BuildMI(BB, X86::FLD64m, 4, DestReg), VAList);
3745 /// visitGetElementPtrInst - instruction-select GEP instructions
3747 void X86ISel::visitGetElementPtrInst(GetElementPtrInst &I) {
3748 // If this GEP instruction will be folded into all of its users, we don't need
3749 // to explicitly calculate it!
3751 if (isGEPFoldable(0, I.getOperand(0), I.op_begin()+1, I.op_end(), AM)) {
3752 // Check all of the users of the instruction to see if they are loads and
3754 bool AllWillFold = true;
3755 for (Value::use_iterator UI = I.use_begin(), E = I.use_end(); UI != E; ++UI)
3756 if (cast<Instruction>(*UI)->getOpcode() != Instruction::Load)
3757 if (cast<Instruction>(*UI)->getOpcode() != Instruction::Store ||
3758 cast<Instruction>(*UI)->getOperand(0) == &I) {
3759 AllWillFold = false;
3763 // If the instruction is foldable, and will be folded into all users, don't
3765 if (AllWillFold) return;
3768 unsigned outputReg = getReg(I);
3769 emitGEPOperation(BB, BB->end(), I.getOperand(0),
3770 I.op_begin()+1, I.op_end(), outputReg);
3773 /// getGEPIndex - Inspect the getelementptr operands specified with GEPOps and
3774 /// GEPTypes (the derived types being stepped through at each level). On return
3775 /// from this function, if some indexes of the instruction are representable as
3776 /// an X86 lea instruction, the machine operands are put into the Ops
3777 /// instruction and the consumed indexes are poped from the GEPOps/GEPTypes
3778 /// lists. Otherwise, GEPOps.size() is returned. If this returns a an
3779 /// addressing mode that only partially consumes the input, the BaseReg input of
3780 /// the addressing mode must be left free.
3782 /// Note that there is one fewer entry in GEPTypes than there is in GEPOps.
3784 void X86ISel::getGEPIndex(MachineBasicBlock *MBB,
3785 MachineBasicBlock::iterator IP,
3786 std::vector<Value*> &GEPOps,
3787 std::vector<const Type*> &GEPTypes,
3788 X86AddressMode &AM) {
3789 const TargetData &TD = TM.getTargetData();
3791 // Clear out the state we are working with...
3792 AM.BaseType = X86AddressMode::RegBase;
3793 AM.Base.Reg = 0; // No base register
3794 AM.Scale = 1; // Unit scale
3795 AM.IndexReg = 0; // No index register
3796 AM.Disp = 0; // No displacement
3798 // While there are GEP indexes that can be folded into the current address,
3799 // keep processing them.
3800 while (!GEPTypes.empty()) {
3801 if (const StructType *StTy = dyn_cast<StructType>(GEPTypes.back())) {
3802 // It's a struct access. CUI is the index into the structure,
3803 // which names the field. This index must have unsigned type.
3804 const ConstantUInt *CUI = cast<ConstantUInt>(GEPOps.back());
3806 // Use the TargetData structure to pick out what the layout of the
3807 // structure is in memory. Since the structure index must be constant, we
3808 // can get its value and use it to find the right byte offset from the
3809 // StructLayout class's list of structure member offsets.
3810 AM.Disp += TD.getStructLayout(StTy)->MemberOffsets[CUI->getValue()];
3811 GEPOps.pop_back(); // Consume a GEP operand
3812 GEPTypes.pop_back();
3814 // It's an array or pointer access: [ArraySize x ElementType].
3815 const SequentialType *SqTy = cast<SequentialType>(GEPTypes.back());
3816 Value *idx = GEPOps.back();
3818 // idx is the index into the array. Unlike with structure
3819 // indices, we may not know its actual value at code-generation
3822 // If idx is a constant, fold it into the offset.
3823 unsigned TypeSize = TD.getTypeSize(SqTy->getElementType());
3824 if (ConstantSInt *CSI = dyn_cast<ConstantSInt>(idx)) {
3825 AM.Disp += TypeSize*CSI->getValue();
3826 } else if (ConstantUInt *CUI = dyn_cast<ConstantUInt>(idx)) {
3827 AM.Disp += TypeSize*CUI->getValue();
3829 // If the index reg is already taken, we can't handle this index.
3830 if (AM.IndexReg) return;
3832 // If this is a size that we can handle, then add the index as
3834 case 1: case 2: case 4: case 8:
3835 // These are all acceptable scales on X86.
3836 AM.Scale = TypeSize;
3839 // Otherwise, we can't handle this scale
3843 if (CastInst *CI = dyn_cast<CastInst>(idx))
3844 if (CI->getOperand(0)->getType() == Type::IntTy ||
3845 CI->getOperand(0)->getType() == Type::UIntTy)
3846 idx = CI->getOperand(0);
3848 AM.IndexReg = MBB ? getReg(idx, MBB, IP) : 1;
3851 GEPOps.pop_back(); // Consume a GEP operand
3852 GEPTypes.pop_back();
3856 // GEPTypes is empty, which means we have a single operand left. Set it as
3857 // the base register.
3859 assert(AM.Base.Reg == 0);
3861 if (AllocaInst *AI = dyn_castFixedAlloca(GEPOps.back())) {
3862 AM.BaseType = X86AddressMode::FrameIndexBase;
3863 AM.Base.FrameIndex = getFixedSizedAllocaFI(AI);
3868 if (GlobalValue *GV = dyn_cast<GlobalValue>(GEPOps.back())) {
3874 AM.Base.Reg = MBB ? getReg(GEPOps[0], MBB, IP) : 1;
3875 GEPOps.pop_back(); // Consume the last GEP operand
3879 /// isGEPFoldable - Return true if the specified GEP can be completely
3880 /// folded into the addressing mode of a load/store or lea instruction.
3881 bool X86ISel::isGEPFoldable(MachineBasicBlock *MBB,
3882 Value *Src, User::op_iterator IdxBegin,
3883 User::op_iterator IdxEnd, X86AddressMode &AM) {
3885 std::vector<Value*> GEPOps;
3886 GEPOps.resize(IdxEnd-IdxBegin+1);
3888 std::copy(IdxBegin, IdxEnd, GEPOps.begin()+1);
3890 std::vector<const Type*>
3891 GEPTypes(gep_type_begin(Src->getType(), IdxBegin, IdxEnd),
3892 gep_type_end(Src->getType(), IdxBegin, IdxEnd));
3894 MachineBasicBlock::iterator IP;
3895 if (MBB) IP = MBB->end();
3896 getGEPIndex(MBB, IP, GEPOps, GEPTypes, AM);
3898 // We can fold it away iff the getGEPIndex call eliminated all operands.
3899 return GEPOps.empty();
3902 void X86ISel::emitGEPOperation(MachineBasicBlock *MBB,
3903 MachineBasicBlock::iterator IP,
3904 Value *Src, User::op_iterator IdxBegin,
3905 User::op_iterator IdxEnd, unsigned TargetReg) {
3906 const TargetData &TD = TM.getTargetData();
3908 // If this is a getelementptr null, with all constant integer indices, just
3909 // replace it with TargetReg = 42.
3910 if (isa<ConstantPointerNull>(Src)) {
3911 User::op_iterator I = IdxBegin;
3912 for (; I != IdxEnd; ++I)
3913 if (!isa<ConstantInt>(*I))
3915 if (I == IdxEnd) { // All constant indices
3916 unsigned Offset = TD.getIndexedOffset(Src->getType(),
3917 std::vector<Value*>(IdxBegin, IdxEnd));
3918 BuildMI(*MBB, IP, X86::MOV32ri, 1, TargetReg).addImm(Offset);
3923 std::vector<Value*> GEPOps;
3924 GEPOps.resize(IdxEnd-IdxBegin+1);
3926 std::copy(IdxBegin, IdxEnd, GEPOps.begin()+1);
3928 std::vector<const Type*> GEPTypes;
3929 GEPTypes.assign(gep_type_begin(Src->getType(), IdxBegin, IdxEnd),
3930 gep_type_end(Src->getType(), IdxBegin, IdxEnd));
3932 // Keep emitting instructions until we consume the entire GEP instruction.
3933 while (!GEPOps.empty()) {
3934 unsigned OldSize = GEPOps.size();
3936 getGEPIndex(MBB, IP, GEPOps, GEPTypes, AM);
3938 if (GEPOps.size() != OldSize) {
3939 // getGEPIndex consumed some of the input. Build an LEA instruction here.
3940 unsigned NextTarget = 0;
3941 if (!GEPOps.empty()) {
3942 assert(AM.Base.Reg == 0 &&
3943 "getGEPIndex should have left the base register open for chaining!");
3944 NextTarget = AM.Base.Reg = makeAnotherReg(Type::UIntTy);
3947 if (AM.BaseType == X86AddressMode::RegBase &&
3948 AM.IndexReg == 0 && AM.Disp == 0 && !AM.GV)
3949 BuildMI(*MBB, IP, X86::MOV32rr, 1, TargetReg).addReg(AM.Base.Reg);
3950 else if (AM.BaseType == X86AddressMode::RegBase && AM.Base.Reg == 0 &&
3951 AM.IndexReg == 0 && AM.Disp == 0)
3952 BuildMI(*MBB, IP, X86::MOV32ri, 1, TargetReg).addGlobalAddress(AM.GV);
3954 addFullAddress(BuildMI(*MBB, IP, X86::LEA32r, 5, TargetReg), AM);
3956 TargetReg = NextTarget;
3957 } else if (GEPTypes.empty()) {
3958 // The getGEPIndex operation didn't want to build an LEA. Check to see if
3959 // all operands are consumed but the base pointer. If so, just load it
3960 // into the register.
3961 if (GlobalValue *GV = dyn_cast<GlobalValue>(GEPOps[0])) {
3962 BuildMI(*MBB, IP, X86::MOV32ri, 1, TargetReg).addGlobalAddress(GV);
3964 unsigned BaseReg = getReg(GEPOps[0], MBB, IP);
3965 BuildMI(*MBB, IP, X86::MOV32rr, 1, TargetReg).addReg(BaseReg);
3967 break; // we are now done
3970 // It's an array or pointer access: [ArraySize x ElementType].
3971 const SequentialType *SqTy = cast<SequentialType>(GEPTypes.back());
3972 Value *idx = GEPOps.back();
3973 GEPOps.pop_back(); // Consume a GEP operand
3974 GEPTypes.pop_back();
3976 // Many GEP instructions use a [cast (int/uint) to LongTy] as their
3977 // operand on X86. Handle this case directly now...
3978 if (CastInst *CI = dyn_cast<CastInst>(idx))
3979 if (CI->getOperand(0)->getType() == Type::IntTy ||
3980 CI->getOperand(0)->getType() == Type::UIntTy)
3981 idx = CI->getOperand(0);
3983 // We want to add BaseReg to(idxReg * sizeof ElementType). First, we
3984 // must find the size of the pointed-to type (Not coincidentally, the next
3985 // type is the type of the elements in the array).
3986 const Type *ElTy = SqTy->getElementType();
3987 unsigned elementSize = TD.getTypeSize(ElTy);
3989 // If idxReg is a constant, we don't need to perform the multiply!
3990 if (ConstantInt *CSI = dyn_cast<ConstantInt>(idx)) {
3991 if (!CSI->isNullValue()) {
3992 unsigned Offset = elementSize*CSI->getRawValue();
3993 unsigned Reg = makeAnotherReg(Type::UIntTy);
3994 BuildMI(*MBB, IP, X86::ADD32ri, 2, TargetReg)
3995 .addReg(Reg).addImm(Offset);
3996 --IP; // Insert the next instruction before this one.
3997 TargetReg = Reg; // Codegen the rest of the GEP into this
3999 } else if (elementSize == 1) {
4000 // If the element size is 1, we don't have to multiply, just add
4001 unsigned idxReg = getReg(idx, MBB, IP);
4002 unsigned Reg = makeAnotherReg(Type::UIntTy);
4003 BuildMI(*MBB, IP, X86::ADD32rr, 2,TargetReg).addReg(Reg).addReg(idxReg);
4004 --IP; // Insert the next instruction before this one.
4005 TargetReg = Reg; // Codegen the rest of the GEP into this
4007 unsigned idxReg = getReg(idx, MBB, IP);
4008 unsigned OffsetReg = makeAnotherReg(Type::UIntTy);
4010 // Make sure we can back the iterator up to point to the first
4011 // instruction emitted.
4012 MachineBasicBlock::iterator BeforeIt = IP;
4013 if (IP == MBB->begin())
4014 BeforeIt = MBB->end();
4017 doMultiplyConst(MBB, IP, OffsetReg, Type::IntTy, idxReg, elementSize);
4019 // Emit an ADD to add OffsetReg to the basePtr.
4020 unsigned Reg = makeAnotherReg(Type::UIntTy);
4021 BuildMI(*MBB, IP, X86::ADD32rr, 2, TargetReg)
4022 .addReg(Reg).addReg(OffsetReg);
4024 // Step to the first instruction of the multiply.
4025 if (BeforeIt == MBB->end())
4030 TargetReg = Reg; // Codegen the rest of the GEP into this
4036 /// visitAllocaInst - If this is a fixed size alloca, allocate space from the
4037 /// frame manager, otherwise do it the hard way.
4039 void X86ISel::visitAllocaInst(AllocaInst &I) {
4040 // If this is a fixed size alloca in the entry block for the function, we
4041 // statically stack allocate the space, so we don't need to do anything here.
4043 if (dyn_castFixedAlloca(&I)) return;
4045 // Find the data size of the alloca inst's getAllocatedType.
4046 const Type *Ty = I.getAllocatedType();
4047 unsigned TySize = TM.getTargetData().getTypeSize(Ty);
4049 // Create a register to hold the temporary result of multiplying the type size
4050 // constant by the variable amount.
4051 unsigned TotalSizeReg = makeAnotherReg(Type::UIntTy);
4052 unsigned SrcReg1 = getReg(I.getArraySize());
4054 // TotalSizeReg = mul <numelements>, <TypeSize>
4055 MachineBasicBlock::iterator MBBI = BB->end();
4056 doMultiplyConst(BB, MBBI, TotalSizeReg, Type::UIntTy, SrcReg1, TySize);
4058 // AddedSize = add <TotalSizeReg>, 15
4059 unsigned AddedSizeReg = makeAnotherReg(Type::UIntTy);
4060 BuildMI(BB, X86::ADD32ri, 2, AddedSizeReg).addReg(TotalSizeReg).addImm(15);
4062 // AlignedSize = and <AddedSize>, ~15
4063 unsigned AlignedSize = makeAnotherReg(Type::UIntTy);
4064 BuildMI(BB, X86::AND32ri, 2, AlignedSize).addReg(AddedSizeReg).addImm(~15);
4066 // Subtract size from stack pointer, thereby allocating some space.
4067 BuildMI(BB, X86::SUB32rr, 2, X86::ESP).addReg(X86::ESP).addReg(AlignedSize);
4069 // Put a pointer to the space into the result register, by copying
4070 // the stack pointer.
4071 BuildMI(BB, X86::MOV32rr, 1, getReg(I)).addReg(X86::ESP);
4073 // Inform the Frame Information that we have just allocated a variable-sized
4075 F->getFrameInfo()->CreateVariableSizedObject();
4078 /// visitMallocInst - Malloc instructions are code generated into direct calls
4079 /// to the library malloc.
4081 void X86ISel::visitMallocInst(MallocInst &I) {
4082 unsigned AllocSize = TM.getTargetData().getTypeSize(I.getAllocatedType());
4085 if (ConstantUInt *C = dyn_cast<ConstantUInt>(I.getOperand(0))) {
4086 Arg = getReg(ConstantUInt::get(Type::UIntTy, C->getValue() * AllocSize));
4088 Arg = makeAnotherReg(Type::UIntTy);
4089 unsigned Op0Reg = getReg(I.getOperand(0));
4090 MachineBasicBlock::iterator MBBI = BB->end();
4091 doMultiplyConst(BB, MBBI, Arg, Type::UIntTy, Op0Reg, AllocSize);
4094 std::vector<ValueRecord> Args;
4095 Args.push_back(ValueRecord(Arg, Type::UIntTy));
4096 MachineInstr *TheCall = BuildMI(X86::CALLpcrel32,
4097 1).addExternalSymbol("malloc", true);
4098 doCall(ValueRecord(getReg(I), I.getType()), TheCall, Args);
4102 /// visitFreeInst - Free instructions are code gen'd to call the free libc
4105 void X86ISel::visitFreeInst(FreeInst &I) {
4106 std::vector<ValueRecord> Args;
4107 Args.push_back(ValueRecord(I.getOperand(0)));
4108 MachineInstr *TheCall = BuildMI(X86::CALLpcrel32,
4109 1).addExternalSymbol("free", true);
4110 doCall(ValueRecord(0, Type::VoidTy), TheCall, Args);
4113 /// createX86SimpleInstructionSelector - This pass converts an LLVM function
4114 /// into a machine code representation is a very simple peep-hole fashion. The
4115 /// generated code sucks but the implementation is nice and simple.
4117 FunctionPass *llvm::createX86SimpleInstructionSelector(TargetMachine &TM) {
4118 return new X86ISel(TM);