1 //===- LoopStrengthReduce.cpp - Strength Reduce IVs in Loops --------------===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This transformation analyzes and transforms the induction variables (and
11 // computations derived from them) into forms suitable for efficient execution
14 // This pass performs a strength reduction on array references inside loops that
15 // have as one or more of their components the loop induction variable, it
16 // rewrites expressions to take advantage of scaled-index addressing modes
17 // available on the target, and it performs a variety of other optimizations
18 // related to loop induction variables.
20 // Terminology note: this code has a lot of handling for "post-increment" or
21 // "post-inc" users. This is not talking about post-increment addressing modes;
22 // it is instead talking about code like this:
24 // %i = phi [ 0, %entry ], [ %i.next, %latch ]
26 // %i.next = add %i, 1
27 // %c = icmp eq %i.next, %n
29 // The SCEV for %i is {0,+,1}<%L>. The SCEV for %i.next is {1,+,1}<%L>, however
30 // it's useful to think about these as the same register, with some uses using
31 // the value of the register before the add and some using // it after. In this
32 // example, the icmp is a post-increment user, since it uses %i.next, which is
33 // the value of the induction variable after the increment. The other common
34 // case of post-increment users is users outside the loop.
36 // TODO: More sophistication in the way Formulae are generated and filtered.
38 // TODO: Handle multiple loops at a time.
40 // TODO: Should TargetLowering::AddrMode::BaseGV be changed to a ConstantExpr
41 // instead of a GlobalValue?
43 // TODO: When truncation is free, truncate ICmp users' operands to make it a
44 // smaller encoding (on x86 at least).
46 // TODO: When a negated register is used by an add (such as in a list of
47 // multiple base registers, or as the increment expression in an addrec),
48 // we may not actually need both reg and (-1 * reg) in registers; the
49 // negation can be implemented by using a sub instead of an add. The
50 // lack of support for taking this into consideration when making
51 // register pressure decisions is partly worked around by the "Special"
54 //===----------------------------------------------------------------------===//
56 #define DEBUG_TYPE "loop-reduce"
57 #include "llvm/Transforms/Scalar.h"
58 #include "llvm/Constants.h"
59 #include "llvm/Instructions.h"
60 #include "llvm/IntrinsicInst.h"
61 #include "llvm/DerivedTypes.h"
62 #include "llvm/Analysis/IVUsers.h"
63 #include "llvm/Analysis/Dominators.h"
64 #include "llvm/Analysis/LoopPass.h"
65 #include "llvm/Analysis/ScalarEvolutionExpander.h"
66 #include "llvm/Assembly/Writer.h"
67 #include "llvm/Transforms/Utils/BasicBlockUtils.h"
68 #include "llvm/Transforms/Utils/Local.h"
69 #include "llvm/ADT/SmallBitVector.h"
70 #include "llvm/ADT/SetVector.h"
71 #include "llvm/ADT/DenseSet.h"
72 #include "llvm/Support/Debug.h"
73 #include "llvm/Support/CommandLine.h"
74 #include "llvm/Support/ValueHandle.h"
75 #include "llvm/Support/raw_ostream.h"
76 #include "llvm/Target/TargetLowering.h"
80 /// MaxIVUsers is an arbitrary threshold that provides an early opportunitiy for
81 /// bail out. This threshold is far beyond the number of users that LSR can
82 /// conceivably solve, so it should not affect generated code, but catches the
83 /// worst cases before LSR burns too much compile time and stack space.
84 static const unsigned MaxIVUsers = 200;
86 // Temporary flag to cleanup congruent phis after LSR phi expansion.
87 // It's currently disabled until we can determine whether it's truly useful or
88 // not. The flag should be removed after the v3.0 release.
89 // This is now needed for ivchains.
90 static cl::opt<bool> EnablePhiElim(
91 "enable-lsr-phielim", cl::Hidden, cl::init(true),
92 cl::desc("Enable LSR phi elimination"));
95 // Stress test IV chain generation.
96 static cl::opt<bool> StressIVChain(
97 "stress-ivchain", cl::Hidden, cl::init(false),
98 cl::desc("Stress test LSR IV chains"));
100 static bool StressIVChain = false;
105 /// RegSortData - This class holds data which is used to order reuse candidates.
108 /// UsedByIndices - This represents the set of LSRUse indices which reference
109 /// a particular register.
110 SmallBitVector UsedByIndices;
114 void print(raw_ostream &OS) const;
120 void RegSortData::print(raw_ostream &OS) const {
121 OS << "[NumUses=" << UsedByIndices.count() << ']';
124 void RegSortData::dump() const {
125 print(errs()); errs() << '\n';
130 /// RegUseTracker - Map register candidates to information about how they are
132 class RegUseTracker {
133 typedef DenseMap<const SCEV *, RegSortData> RegUsesTy;
135 RegUsesTy RegUsesMap;
136 SmallVector<const SCEV *, 16> RegSequence;
139 void CountRegister(const SCEV *Reg, size_t LUIdx);
140 void DropRegister(const SCEV *Reg, size_t LUIdx);
141 void SwapAndDropUse(size_t LUIdx, size_t LastLUIdx);
143 bool isRegUsedByUsesOtherThan(const SCEV *Reg, size_t LUIdx) const;
145 const SmallBitVector &getUsedByIndices(const SCEV *Reg) const;
149 typedef SmallVectorImpl<const SCEV *>::iterator iterator;
150 typedef SmallVectorImpl<const SCEV *>::const_iterator const_iterator;
151 iterator begin() { return RegSequence.begin(); }
152 iterator end() { return RegSequence.end(); }
153 const_iterator begin() const { return RegSequence.begin(); }
154 const_iterator end() const { return RegSequence.end(); }
160 RegUseTracker::CountRegister(const SCEV *Reg, size_t LUIdx) {
161 std::pair<RegUsesTy::iterator, bool> Pair =
162 RegUsesMap.insert(std::make_pair(Reg, RegSortData()));
163 RegSortData &RSD = Pair.first->second;
165 RegSequence.push_back(Reg);
166 RSD.UsedByIndices.resize(std::max(RSD.UsedByIndices.size(), LUIdx + 1));
167 RSD.UsedByIndices.set(LUIdx);
171 RegUseTracker::DropRegister(const SCEV *Reg, size_t LUIdx) {
172 RegUsesTy::iterator It = RegUsesMap.find(Reg);
173 assert(It != RegUsesMap.end());
174 RegSortData &RSD = It->second;
175 assert(RSD.UsedByIndices.size() > LUIdx);
176 RSD.UsedByIndices.reset(LUIdx);
180 RegUseTracker::SwapAndDropUse(size_t LUIdx, size_t LastLUIdx) {
181 assert(LUIdx <= LastLUIdx);
183 // Update RegUses. The data structure is not optimized for this purpose;
184 // we must iterate through it and update each of the bit vectors.
185 for (RegUsesTy::iterator I = RegUsesMap.begin(), E = RegUsesMap.end();
187 SmallBitVector &UsedByIndices = I->second.UsedByIndices;
188 if (LUIdx < UsedByIndices.size())
189 UsedByIndices[LUIdx] =
190 LastLUIdx < UsedByIndices.size() ? UsedByIndices[LastLUIdx] : 0;
191 UsedByIndices.resize(std::min(UsedByIndices.size(), LastLUIdx));
196 RegUseTracker::isRegUsedByUsesOtherThan(const SCEV *Reg, size_t LUIdx) const {
197 RegUsesTy::const_iterator I = RegUsesMap.find(Reg);
198 if (I == RegUsesMap.end())
200 const SmallBitVector &UsedByIndices = I->second.UsedByIndices;
201 int i = UsedByIndices.find_first();
202 if (i == -1) return false;
203 if ((size_t)i != LUIdx) return true;
204 return UsedByIndices.find_next(i) != -1;
207 const SmallBitVector &RegUseTracker::getUsedByIndices(const SCEV *Reg) const {
208 RegUsesTy::const_iterator I = RegUsesMap.find(Reg);
209 assert(I != RegUsesMap.end() && "Unknown register!");
210 return I->second.UsedByIndices;
213 void RegUseTracker::clear() {
220 /// Formula - This class holds information that describes a formula for
221 /// computing satisfying a use. It may include broken-out immediates and scaled
224 /// AM - This is used to represent complex addressing, as well as other kinds
225 /// of interesting uses.
226 TargetLowering::AddrMode AM;
228 /// BaseRegs - The list of "base" registers for this use. When this is
229 /// non-empty, AM.HasBaseReg should be set to true.
230 SmallVector<const SCEV *, 2> BaseRegs;
232 /// ScaledReg - The 'scaled' register for this use. This should be non-null
233 /// when AM.Scale is not zero.
234 const SCEV *ScaledReg;
236 /// UnfoldedOffset - An additional constant offset which added near the
237 /// use. This requires a temporary register, but the offset itself can
238 /// live in an add immediate field rather than a register.
239 int64_t UnfoldedOffset;
241 Formula() : ScaledReg(0), UnfoldedOffset(0) {}
243 void InitialMatch(const SCEV *S, Loop *L, ScalarEvolution &SE);
245 unsigned getNumRegs() const;
246 Type *getType() const;
248 void DeleteBaseReg(const SCEV *&S);
250 bool referencesReg(const SCEV *S) const;
251 bool hasRegsUsedByUsesOtherThan(size_t LUIdx,
252 const RegUseTracker &RegUses) const;
254 void print(raw_ostream &OS) const;
260 /// DoInitialMatch - Recursion helper for InitialMatch.
261 static void DoInitialMatch(const SCEV *S, Loop *L,
262 SmallVectorImpl<const SCEV *> &Good,
263 SmallVectorImpl<const SCEV *> &Bad,
264 ScalarEvolution &SE) {
265 // Collect expressions which properly dominate the loop header.
266 if (SE.properlyDominates(S, L->getHeader())) {
271 // Look at add operands.
272 if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
273 for (SCEVAddExpr::op_iterator I = Add->op_begin(), E = Add->op_end();
275 DoInitialMatch(*I, L, Good, Bad, SE);
279 // Look at addrec operands.
280 if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S))
281 if (!AR->getStart()->isZero()) {
282 DoInitialMatch(AR->getStart(), L, Good, Bad, SE);
283 DoInitialMatch(SE.getAddRecExpr(SE.getConstant(AR->getType(), 0),
284 AR->getStepRecurrence(SE),
285 // FIXME: AR->getNoWrapFlags()
286 AR->getLoop(), SCEV::FlagAnyWrap),
291 // Handle a multiplication by -1 (negation) if it didn't fold.
292 if (const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(S))
293 if (Mul->getOperand(0)->isAllOnesValue()) {
294 SmallVector<const SCEV *, 4> Ops(Mul->op_begin()+1, Mul->op_end());
295 const SCEV *NewMul = SE.getMulExpr(Ops);
297 SmallVector<const SCEV *, 4> MyGood;
298 SmallVector<const SCEV *, 4> MyBad;
299 DoInitialMatch(NewMul, L, MyGood, MyBad, SE);
300 const SCEV *NegOne = SE.getSCEV(ConstantInt::getAllOnesValue(
301 SE.getEffectiveSCEVType(NewMul->getType())));
302 for (SmallVectorImpl<const SCEV *>::const_iterator I = MyGood.begin(),
303 E = MyGood.end(); I != E; ++I)
304 Good.push_back(SE.getMulExpr(NegOne, *I));
305 for (SmallVectorImpl<const SCEV *>::const_iterator I = MyBad.begin(),
306 E = MyBad.end(); I != E; ++I)
307 Bad.push_back(SE.getMulExpr(NegOne, *I));
311 // Ok, we can't do anything interesting. Just stuff the whole thing into a
312 // register and hope for the best.
316 /// InitialMatch - Incorporate loop-variant parts of S into this Formula,
317 /// attempting to keep all loop-invariant and loop-computable values in a
318 /// single base register.
319 void Formula::InitialMatch(const SCEV *S, Loop *L, ScalarEvolution &SE) {
320 SmallVector<const SCEV *, 4> Good;
321 SmallVector<const SCEV *, 4> Bad;
322 DoInitialMatch(S, L, Good, Bad, SE);
324 const SCEV *Sum = SE.getAddExpr(Good);
326 BaseRegs.push_back(Sum);
327 AM.HasBaseReg = true;
330 const SCEV *Sum = SE.getAddExpr(Bad);
332 BaseRegs.push_back(Sum);
333 AM.HasBaseReg = true;
337 /// getNumRegs - Return the total number of register operands used by this
338 /// formula. This does not include register uses implied by non-constant
340 unsigned Formula::getNumRegs() const {
341 return !!ScaledReg + BaseRegs.size();
344 /// getType - Return the type of this formula, if it has one, or null
345 /// otherwise. This type is meaningless except for the bit size.
346 Type *Formula::getType() const {
347 return !BaseRegs.empty() ? BaseRegs.front()->getType() :
348 ScaledReg ? ScaledReg->getType() :
349 AM.BaseGV ? AM.BaseGV->getType() :
353 /// DeleteBaseReg - Delete the given base reg from the BaseRegs list.
354 void Formula::DeleteBaseReg(const SCEV *&S) {
355 if (&S != &BaseRegs.back())
356 std::swap(S, BaseRegs.back());
360 /// referencesReg - Test if this formula references the given register.
361 bool Formula::referencesReg(const SCEV *S) const {
362 return S == ScaledReg ||
363 std::find(BaseRegs.begin(), BaseRegs.end(), S) != BaseRegs.end();
366 /// hasRegsUsedByUsesOtherThan - Test whether this formula uses registers
367 /// which are used by uses other than the use with the given index.
368 bool Formula::hasRegsUsedByUsesOtherThan(size_t LUIdx,
369 const RegUseTracker &RegUses) const {
371 if (RegUses.isRegUsedByUsesOtherThan(ScaledReg, LUIdx))
373 for (SmallVectorImpl<const SCEV *>::const_iterator I = BaseRegs.begin(),
374 E = BaseRegs.end(); I != E; ++I)
375 if (RegUses.isRegUsedByUsesOtherThan(*I, LUIdx))
380 void Formula::print(raw_ostream &OS) const {
383 if (!First) OS << " + "; else First = false;
384 WriteAsOperand(OS, AM.BaseGV, /*PrintType=*/false);
386 if (AM.BaseOffs != 0) {
387 if (!First) OS << " + "; else First = false;
390 for (SmallVectorImpl<const SCEV *>::const_iterator I = BaseRegs.begin(),
391 E = BaseRegs.end(); I != E; ++I) {
392 if (!First) OS << " + "; else First = false;
393 OS << "reg(" << **I << ')';
395 if (AM.HasBaseReg && BaseRegs.empty()) {
396 if (!First) OS << " + "; else First = false;
397 OS << "**error: HasBaseReg**";
398 } else if (!AM.HasBaseReg && !BaseRegs.empty()) {
399 if (!First) OS << " + "; else First = false;
400 OS << "**error: !HasBaseReg**";
403 if (!First) OS << " + "; else First = false;
404 OS << AM.Scale << "*reg(";
411 if (UnfoldedOffset != 0) {
412 if (!First) OS << " + "; else First = false;
413 OS << "imm(" << UnfoldedOffset << ')';
417 void Formula::dump() const {
418 print(errs()); errs() << '\n';
421 /// isAddRecSExtable - Return true if the given addrec can be sign-extended
422 /// without changing its value.
423 static bool isAddRecSExtable(const SCEVAddRecExpr *AR, ScalarEvolution &SE) {
425 IntegerType::get(SE.getContext(), SE.getTypeSizeInBits(AR->getType()) + 1);
426 return isa<SCEVAddRecExpr>(SE.getSignExtendExpr(AR, WideTy));
429 /// isAddSExtable - Return true if the given add can be sign-extended
430 /// without changing its value.
431 static bool isAddSExtable(const SCEVAddExpr *A, ScalarEvolution &SE) {
433 IntegerType::get(SE.getContext(), SE.getTypeSizeInBits(A->getType()) + 1);
434 return isa<SCEVAddExpr>(SE.getSignExtendExpr(A, WideTy));
437 /// isMulSExtable - Return true if the given mul can be sign-extended
438 /// without changing its value.
439 static bool isMulSExtable(const SCEVMulExpr *M, ScalarEvolution &SE) {
441 IntegerType::get(SE.getContext(),
442 SE.getTypeSizeInBits(M->getType()) * M->getNumOperands());
443 return isa<SCEVMulExpr>(SE.getSignExtendExpr(M, WideTy));
446 /// getExactSDiv - Return an expression for LHS /s RHS, if it can be determined
447 /// and if the remainder is known to be zero, or null otherwise. If
448 /// IgnoreSignificantBits is true, expressions like (X * Y) /s Y are simplified
449 /// to Y, ignoring that the multiplication may overflow, which is useful when
450 /// the result will be used in a context where the most significant bits are
452 static const SCEV *getExactSDiv(const SCEV *LHS, const SCEV *RHS,
454 bool IgnoreSignificantBits = false) {
455 // Handle the trivial case, which works for any SCEV type.
457 return SE.getConstant(LHS->getType(), 1);
459 // Handle a few RHS special cases.
460 const SCEVConstant *RC = dyn_cast<SCEVConstant>(RHS);
462 const APInt &RA = RC->getValue()->getValue();
463 // Handle x /s -1 as x * -1, to give ScalarEvolution a chance to do
465 if (RA.isAllOnesValue())
466 return SE.getMulExpr(LHS, RC);
467 // Handle x /s 1 as x.
472 // Check for a division of a constant by a constant.
473 if (const SCEVConstant *C = dyn_cast<SCEVConstant>(LHS)) {
476 const APInt &LA = C->getValue()->getValue();
477 const APInt &RA = RC->getValue()->getValue();
478 if (LA.srem(RA) != 0)
480 return SE.getConstant(LA.sdiv(RA));
483 // Distribute the sdiv over addrec operands, if the addrec doesn't overflow.
484 if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(LHS)) {
485 if (IgnoreSignificantBits || isAddRecSExtable(AR, SE)) {
486 const SCEV *Step = getExactSDiv(AR->getStepRecurrence(SE), RHS, SE,
487 IgnoreSignificantBits);
489 const SCEV *Start = getExactSDiv(AR->getStart(), RHS, SE,
490 IgnoreSignificantBits);
491 if (!Start) return 0;
492 // FlagNW is independent of the start value, step direction, and is
493 // preserved with smaller magnitude steps.
494 // FIXME: AR->getNoWrapFlags(SCEV::FlagNW)
495 return SE.getAddRecExpr(Start, Step, AR->getLoop(), SCEV::FlagAnyWrap);
500 // Distribute the sdiv over add operands, if the add doesn't overflow.
501 if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(LHS)) {
502 if (IgnoreSignificantBits || isAddSExtable(Add, SE)) {
503 SmallVector<const SCEV *, 8> Ops;
504 for (SCEVAddExpr::op_iterator I = Add->op_begin(), E = Add->op_end();
506 const SCEV *Op = getExactSDiv(*I, RHS, SE,
507 IgnoreSignificantBits);
511 return SE.getAddExpr(Ops);
516 // Check for a multiply operand that we can pull RHS out of.
517 if (const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(LHS)) {
518 if (IgnoreSignificantBits || isMulSExtable(Mul, SE)) {
519 SmallVector<const SCEV *, 4> Ops;
521 for (SCEVMulExpr::op_iterator I = Mul->op_begin(), E = Mul->op_end();
525 if (const SCEV *Q = getExactSDiv(S, RHS, SE,
526 IgnoreSignificantBits)) {
532 return Found ? SE.getMulExpr(Ops) : 0;
537 // Otherwise we don't know.
541 /// ExtractImmediate - If S involves the addition of a constant integer value,
542 /// return that integer value, and mutate S to point to a new SCEV with that
544 static int64_t ExtractImmediate(const SCEV *&S, ScalarEvolution &SE) {
545 if (const SCEVConstant *C = dyn_cast<SCEVConstant>(S)) {
546 if (C->getValue()->getValue().getMinSignedBits() <= 64) {
547 S = SE.getConstant(C->getType(), 0);
548 return C->getValue()->getSExtValue();
550 } else if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
551 SmallVector<const SCEV *, 8> NewOps(Add->op_begin(), Add->op_end());
552 int64_t Result = ExtractImmediate(NewOps.front(), SE);
554 S = SE.getAddExpr(NewOps);
556 } else if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S)) {
557 SmallVector<const SCEV *, 8> NewOps(AR->op_begin(), AR->op_end());
558 int64_t Result = ExtractImmediate(NewOps.front(), SE);
560 S = SE.getAddRecExpr(NewOps, AR->getLoop(),
561 // FIXME: AR->getNoWrapFlags(SCEV::FlagNW)
568 /// ExtractSymbol - If S involves the addition of a GlobalValue address,
569 /// return that symbol, and mutate S to point to a new SCEV with that
571 static GlobalValue *ExtractSymbol(const SCEV *&S, ScalarEvolution &SE) {
572 if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(S)) {
573 if (GlobalValue *GV = dyn_cast<GlobalValue>(U->getValue())) {
574 S = SE.getConstant(GV->getType(), 0);
577 } else if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
578 SmallVector<const SCEV *, 8> NewOps(Add->op_begin(), Add->op_end());
579 GlobalValue *Result = ExtractSymbol(NewOps.back(), SE);
581 S = SE.getAddExpr(NewOps);
583 } else if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S)) {
584 SmallVector<const SCEV *, 8> NewOps(AR->op_begin(), AR->op_end());
585 GlobalValue *Result = ExtractSymbol(NewOps.front(), SE);
587 S = SE.getAddRecExpr(NewOps, AR->getLoop(),
588 // FIXME: AR->getNoWrapFlags(SCEV::FlagNW)
595 /// isAddressUse - Returns true if the specified instruction is using the
596 /// specified value as an address.
597 static bool isAddressUse(Instruction *Inst, Value *OperandVal) {
598 bool isAddress = isa<LoadInst>(Inst);
599 if (StoreInst *SI = dyn_cast<StoreInst>(Inst)) {
600 if (SI->getOperand(1) == OperandVal)
602 } else if (IntrinsicInst *II = dyn_cast<IntrinsicInst>(Inst)) {
603 // Addressing modes can also be folded into prefetches and a variety
605 switch (II->getIntrinsicID()) {
607 case Intrinsic::prefetch:
608 case Intrinsic::x86_sse_storeu_ps:
609 case Intrinsic::x86_sse2_storeu_pd:
610 case Intrinsic::x86_sse2_storeu_dq:
611 case Intrinsic::x86_sse2_storel_dq:
612 if (II->getArgOperand(0) == OperandVal)
620 /// getAccessType - Return the type of the memory being accessed.
621 static Type *getAccessType(const Instruction *Inst) {
622 Type *AccessTy = Inst->getType();
623 if (const StoreInst *SI = dyn_cast<StoreInst>(Inst))
624 AccessTy = SI->getOperand(0)->getType();
625 else if (const IntrinsicInst *II = dyn_cast<IntrinsicInst>(Inst)) {
626 // Addressing modes can also be folded into prefetches and a variety
628 switch (II->getIntrinsicID()) {
630 case Intrinsic::x86_sse_storeu_ps:
631 case Intrinsic::x86_sse2_storeu_pd:
632 case Intrinsic::x86_sse2_storeu_dq:
633 case Intrinsic::x86_sse2_storel_dq:
634 AccessTy = II->getArgOperand(0)->getType();
639 // All pointers have the same requirements, so canonicalize them to an
640 // arbitrary pointer type to minimize variation.
641 if (PointerType *PTy = dyn_cast<PointerType>(AccessTy))
642 AccessTy = PointerType::get(IntegerType::get(PTy->getContext(), 1),
643 PTy->getAddressSpace());
648 /// isExistingPhi - Return true if this AddRec is already a phi in its loop.
649 static bool isExistingPhi(const SCEVAddRecExpr *AR, ScalarEvolution &SE) {
650 for (BasicBlock::iterator I = AR->getLoop()->getHeader()->begin();
651 PHINode *PN = dyn_cast<PHINode>(I); ++I) {
652 if (SE.isSCEVable(PN->getType()) &&
653 (SE.getEffectiveSCEVType(PN->getType()) ==
654 SE.getEffectiveSCEVType(AR->getType())) &&
655 SE.getSCEV(PN) == AR)
661 /// Check if expanding this expression is likely to incur significant cost. This
662 /// is tricky because SCEV doesn't track which expressions are actually computed
663 /// by the current IR.
665 /// We currently allow expansion of IV increments that involve adds,
666 /// multiplication by constants, and AddRecs from existing phis.
668 /// TODO: Allow UDivExpr if we can find an existing IV increment that is an
669 /// obvious multiple of the UDivExpr.
670 static bool isHighCostExpansion(const SCEV *S,
671 SmallPtrSet<const SCEV*, 8> &Processed,
672 ScalarEvolution &SE) {
673 // Zero/One operand expressions
674 switch (S->getSCEVType()) {
679 return isHighCostExpansion(cast<SCEVTruncateExpr>(S)->getOperand(),
682 return isHighCostExpansion(cast<SCEVZeroExtendExpr>(S)->getOperand(),
685 return isHighCostExpansion(cast<SCEVSignExtendExpr>(S)->getOperand(),
689 if (!Processed.insert(S))
692 if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
693 for (SCEVAddExpr::op_iterator I = Add->op_begin(), E = Add->op_end();
695 if (isHighCostExpansion(*I, Processed, SE))
701 if (const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(S)) {
702 if (Mul->getNumOperands() == 2) {
703 // Multiplication by a constant is ok
704 if (isa<SCEVConstant>(Mul->getOperand(0)))
705 return isHighCostExpansion(Mul->getOperand(1), Processed, SE);
707 // If we have the value of one operand, check if an existing
708 // multiplication already generates this expression.
709 if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(Mul->getOperand(1))) {
710 Value *UVal = U->getValue();
711 for (Value::use_iterator UI = UVal->use_begin(), UE = UVal->use_end();
713 // If U is a constant, it may be used by a ConstantExpr.
714 Instruction *User = dyn_cast<Instruction>(*UI);
715 if (User && User->getOpcode() == Instruction::Mul
716 && SE.isSCEVable(User->getType())) {
717 return SE.getSCEV(User) == Mul;
724 if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S)) {
725 if (isExistingPhi(AR, SE))
729 // Fow now, consider any other type of expression (div/mul/min/max) high cost.
733 /// DeleteTriviallyDeadInstructions - If any of the instructions is the
734 /// specified set are trivially dead, delete them and see if this makes any of
735 /// their operands subsequently dead.
737 DeleteTriviallyDeadInstructions(SmallVectorImpl<WeakVH> &DeadInsts) {
738 bool Changed = false;
740 while (!DeadInsts.empty()) {
741 Instruction *I = dyn_cast_or_null<Instruction>(&*DeadInsts.pop_back_val());
743 if (I == 0 || !isInstructionTriviallyDead(I))
746 for (User::op_iterator OI = I->op_begin(), E = I->op_end(); OI != E; ++OI)
747 if (Instruction *U = dyn_cast<Instruction>(*OI)) {
750 DeadInsts.push_back(U);
753 I->eraseFromParent();
762 /// Cost - This class is used to measure and compare candidate formulae.
764 /// TODO: Some of these could be merged. Also, a lexical ordering
765 /// isn't always optimal.
769 unsigned NumBaseAdds;
775 : NumRegs(0), AddRecCost(0), NumIVMuls(0), NumBaseAdds(0), ImmCost(0),
778 bool operator<(const Cost &Other) const;
783 // Once any of the metrics loses, they must all remain losers.
785 return ((NumRegs | AddRecCost | NumIVMuls | NumBaseAdds
786 | ImmCost | SetupCost) != ~0u)
787 || ((NumRegs & AddRecCost & NumIVMuls & NumBaseAdds
788 & ImmCost & SetupCost) == ~0u);
793 assert(isValid() && "invalid cost");
794 return NumRegs == ~0u;
797 void RateFormula(const Formula &F,
798 SmallPtrSet<const SCEV *, 16> &Regs,
799 const DenseSet<const SCEV *> &VisitedRegs,
801 const SmallVectorImpl<int64_t> &Offsets,
802 ScalarEvolution &SE, DominatorTree &DT,
803 SmallPtrSet<const SCEV *, 16> *LoserRegs = 0);
805 void print(raw_ostream &OS) const;
809 void RateRegister(const SCEV *Reg,
810 SmallPtrSet<const SCEV *, 16> &Regs,
812 ScalarEvolution &SE, DominatorTree &DT);
813 void RatePrimaryRegister(const SCEV *Reg,
814 SmallPtrSet<const SCEV *, 16> &Regs,
816 ScalarEvolution &SE, DominatorTree &DT,
817 SmallPtrSet<const SCEV *, 16> *LoserRegs);
822 /// RateRegister - Tally up interesting quantities from the given register.
823 void Cost::RateRegister(const SCEV *Reg,
824 SmallPtrSet<const SCEV *, 16> &Regs,
826 ScalarEvolution &SE, DominatorTree &DT) {
827 if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(Reg)) {
828 // If this is an addrec for another loop, don't second-guess its addrec phi
829 // nodes. LSR isn't currently smart enough to reason about more than one
830 // loop at a time. LSR has already run on inner loops, will not run on outer
831 // loops, and cannot be expected to change sibling loops.
832 if (AR->getLoop() != L) {
833 // If the AddRec exists, consider it's register free and leave it alone.
834 if (isExistingPhi(AR, SE))
837 // Otherwise, do not consider this formula at all.
841 AddRecCost += 1; /// TODO: This should be a function of the stride.
843 // Add the step value register, if it needs one.
844 // TODO: The non-affine case isn't precisely modeled here.
845 if (!AR->isAffine() || !isa<SCEVConstant>(AR->getOperand(1))) {
846 if (!Regs.count(AR->getOperand(1))) {
847 RateRegister(AR->getOperand(1), Regs, L, SE, DT);
855 // Rough heuristic; favor registers which don't require extra setup
856 // instructions in the preheader.
857 if (!isa<SCEVUnknown>(Reg) &&
858 !isa<SCEVConstant>(Reg) &&
859 !(isa<SCEVAddRecExpr>(Reg) &&
860 (isa<SCEVUnknown>(cast<SCEVAddRecExpr>(Reg)->getStart()) ||
861 isa<SCEVConstant>(cast<SCEVAddRecExpr>(Reg)->getStart()))))
864 NumIVMuls += isa<SCEVMulExpr>(Reg) &&
865 SE.hasComputableLoopEvolution(Reg, L);
868 /// RatePrimaryRegister - Record this register in the set. If we haven't seen it
869 /// before, rate it. Optional LoserRegs provides a way to declare any formula
870 /// that refers to one of those regs an instant loser.
871 void Cost::RatePrimaryRegister(const SCEV *Reg,
872 SmallPtrSet<const SCEV *, 16> &Regs,
874 ScalarEvolution &SE, DominatorTree &DT,
875 SmallPtrSet<const SCEV *, 16> *LoserRegs) {
876 if (LoserRegs && LoserRegs->count(Reg)) {
880 if (Regs.insert(Reg)) {
881 RateRegister(Reg, Regs, L, SE, DT);
883 LoserRegs->insert(Reg);
887 void Cost::RateFormula(const Formula &F,
888 SmallPtrSet<const SCEV *, 16> &Regs,
889 const DenseSet<const SCEV *> &VisitedRegs,
891 const SmallVectorImpl<int64_t> &Offsets,
892 ScalarEvolution &SE, DominatorTree &DT,
893 SmallPtrSet<const SCEV *, 16> *LoserRegs) {
894 // Tally up the registers.
895 if (const SCEV *ScaledReg = F.ScaledReg) {
896 if (VisitedRegs.count(ScaledReg)) {
900 RatePrimaryRegister(ScaledReg, Regs, L, SE, DT, LoserRegs);
904 for (SmallVectorImpl<const SCEV *>::const_iterator I = F.BaseRegs.begin(),
905 E = F.BaseRegs.end(); I != E; ++I) {
906 const SCEV *BaseReg = *I;
907 if (VisitedRegs.count(BaseReg)) {
911 RatePrimaryRegister(BaseReg, Regs, L, SE, DT, LoserRegs);
916 // Determine how many (unfolded) adds we'll need inside the loop.
917 size_t NumBaseParts = F.BaseRegs.size() + (F.UnfoldedOffset != 0);
918 if (NumBaseParts > 1)
919 NumBaseAdds += NumBaseParts - 1;
921 // Tally up the non-zero immediates.
922 for (SmallVectorImpl<int64_t>::const_iterator I = Offsets.begin(),
923 E = Offsets.end(); I != E; ++I) {
924 int64_t Offset = (uint64_t)*I + F.AM.BaseOffs;
926 ImmCost += 64; // Handle symbolic values conservatively.
927 // TODO: This should probably be the pointer size.
928 else if (Offset != 0)
929 ImmCost += APInt(64, Offset, true).getMinSignedBits();
931 assert(isValid() && "invalid cost");
934 /// Loose - Set this cost to a losing value.
944 /// operator< - Choose the lower cost.
945 bool Cost::operator<(const Cost &Other) const {
946 if (NumRegs != Other.NumRegs)
947 return NumRegs < Other.NumRegs;
948 if (AddRecCost != Other.AddRecCost)
949 return AddRecCost < Other.AddRecCost;
950 if (NumIVMuls != Other.NumIVMuls)
951 return NumIVMuls < Other.NumIVMuls;
952 if (NumBaseAdds != Other.NumBaseAdds)
953 return NumBaseAdds < Other.NumBaseAdds;
954 if (ImmCost != Other.ImmCost)
955 return ImmCost < Other.ImmCost;
956 if (SetupCost != Other.SetupCost)
957 return SetupCost < Other.SetupCost;
961 void Cost::print(raw_ostream &OS) const {
962 OS << NumRegs << " reg" << (NumRegs == 1 ? "" : "s");
964 OS << ", with addrec cost " << AddRecCost;
966 OS << ", plus " << NumIVMuls << " IV mul" << (NumIVMuls == 1 ? "" : "s");
967 if (NumBaseAdds != 0)
968 OS << ", plus " << NumBaseAdds << " base add"
969 << (NumBaseAdds == 1 ? "" : "s");
971 OS << ", plus " << ImmCost << " imm cost";
973 OS << ", plus " << SetupCost << " setup cost";
976 void Cost::dump() const {
977 print(errs()); errs() << '\n';
982 /// LSRFixup - An operand value in an instruction which is to be replaced
983 /// with some equivalent, possibly strength-reduced, replacement.
985 /// UserInst - The instruction which will be updated.
986 Instruction *UserInst;
988 /// OperandValToReplace - The operand of the instruction which will
989 /// be replaced. The operand may be used more than once; every instance
990 /// will be replaced.
991 Value *OperandValToReplace;
993 /// PostIncLoops - If this user is to use the post-incremented value of an
994 /// induction variable, this variable is non-null and holds the loop
995 /// associated with the induction variable.
996 PostIncLoopSet PostIncLoops;
998 /// LUIdx - The index of the LSRUse describing the expression which
999 /// this fixup needs, minus an offset (below).
1002 /// Offset - A constant offset to be added to the LSRUse expression.
1003 /// This allows multiple fixups to share the same LSRUse with different
1004 /// offsets, for example in an unrolled loop.
1007 bool isUseFullyOutsideLoop(const Loop *L) const;
1011 void print(raw_ostream &OS) const;
1017 LSRFixup::LSRFixup()
1018 : UserInst(0), OperandValToReplace(0), LUIdx(~size_t(0)), Offset(0) {}
1020 /// isUseFullyOutsideLoop - Test whether this fixup always uses its
1021 /// value outside of the given loop.
1022 bool LSRFixup::isUseFullyOutsideLoop(const Loop *L) const {
1023 // PHI nodes use their value in their incoming blocks.
1024 if (const PHINode *PN = dyn_cast<PHINode>(UserInst)) {
1025 for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
1026 if (PN->getIncomingValue(i) == OperandValToReplace &&
1027 L->contains(PN->getIncomingBlock(i)))
1032 return !L->contains(UserInst);
1035 void LSRFixup::print(raw_ostream &OS) const {
1037 // Store is common and interesting enough to be worth special-casing.
1038 if (StoreInst *Store = dyn_cast<StoreInst>(UserInst)) {
1040 WriteAsOperand(OS, Store->getOperand(0), /*PrintType=*/false);
1041 } else if (UserInst->getType()->isVoidTy())
1042 OS << UserInst->getOpcodeName();
1044 WriteAsOperand(OS, UserInst, /*PrintType=*/false);
1046 OS << ", OperandValToReplace=";
1047 WriteAsOperand(OS, OperandValToReplace, /*PrintType=*/false);
1049 for (PostIncLoopSet::const_iterator I = PostIncLoops.begin(),
1050 E = PostIncLoops.end(); I != E; ++I) {
1051 OS << ", PostIncLoop=";
1052 WriteAsOperand(OS, (*I)->getHeader(), /*PrintType=*/false);
1055 if (LUIdx != ~size_t(0))
1056 OS << ", LUIdx=" << LUIdx;
1059 OS << ", Offset=" << Offset;
1062 void LSRFixup::dump() const {
1063 print(errs()); errs() << '\n';
1068 /// UniquifierDenseMapInfo - A DenseMapInfo implementation for holding
1069 /// DenseMaps and DenseSets of sorted SmallVectors of const SCEV*.
1070 struct UniquifierDenseMapInfo {
1071 static SmallVector<const SCEV *, 2> getEmptyKey() {
1072 SmallVector<const SCEV *, 2> V;
1073 V.push_back(reinterpret_cast<const SCEV *>(-1));
1077 static SmallVector<const SCEV *, 2> getTombstoneKey() {
1078 SmallVector<const SCEV *, 2> V;
1079 V.push_back(reinterpret_cast<const SCEV *>(-2));
1083 static unsigned getHashValue(const SmallVector<const SCEV *, 2> &V) {
1084 unsigned Result = 0;
1085 for (SmallVectorImpl<const SCEV *>::const_iterator I = V.begin(),
1086 E = V.end(); I != E; ++I)
1087 Result ^= DenseMapInfo<const SCEV *>::getHashValue(*I);
1091 static bool isEqual(const SmallVector<const SCEV *, 2> &LHS,
1092 const SmallVector<const SCEV *, 2> &RHS) {
1097 /// LSRUse - This class holds the state that LSR keeps for each use in
1098 /// IVUsers, as well as uses invented by LSR itself. It includes information
1099 /// about what kinds of things can be folded into the user, information about
1100 /// the user itself, and information about how the use may be satisfied.
1101 /// TODO: Represent multiple users of the same expression in common?
1103 DenseSet<SmallVector<const SCEV *, 2>, UniquifierDenseMapInfo> Uniquifier;
1106 /// KindType - An enum for a kind of use, indicating what types of
1107 /// scaled and immediate operands it might support.
1109 Basic, ///< A normal use, with no folding.
1110 Special, ///< A special case of basic, allowing -1 scales.
1111 Address, ///< An address use; folding according to TargetLowering
1112 ICmpZero ///< An equality icmp with both operands folded into one.
1113 // TODO: Add a generic icmp too?
1119 SmallVector<int64_t, 8> Offsets;
1123 /// AllFixupsOutsideLoop - This records whether all of the fixups using this
1124 /// LSRUse are outside of the loop, in which case some special-case heuristics
1126 bool AllFixupsOutsideLoop;
1128 /// WidestFixupType - This records the widest use type for any fixup using
1129 /// this LSRUse. FindUseWithSimilarFormula can't consider uses with different
1130 /// max fixup widths to be equivalent, because the narrower one may be relying
1131 /// on the implicit truncation to truncate away bogus bits.
1132 Type *WidestFixupType;
1134 /// Formulae - A list of ways to build a value that can satisfy this user.
1135 /// After the list is populated, one of these is selected heuristically and
1136 /// used to formulate a replacement for OperandValToReplace in UserInst.
1137 SmallVector<Formula, 12> Formulae;
1139 /// Regs - The set of register candidates used by all formulae in this LSRUse.
1140 SmallPtrSet<const SCEV *, 4> Regs;
1142 LSRUse(KindType K, Type *T) : Kind(K), AccessTy(T),
1143 MinOffset(INT64_MAX),
1144 MaxOffset(INT64_MIN),
1145 AllFixupsOutsideLoop(true),
1146 WidestFixupType(0) {}
1148 bool HasFormulaWithSameRegs(const Formula &F) const;
1149 bool InsertFormula(const Formula &F);
1150 void DeleteFormula(Formula &F);
1151 void RecomputeRegs(size_t LUIdx, RegUseTracker &Reguses);
1153 void print(raw_ostream &OS) const;
1159 /// HasFormula - Test whether this use as a formula which has the same
1160 /// registers as the given formula.
1161 bool LSRUse::HasFormulaWithSameRegs(const Formula &F) const {
1162 SmallVector<const SCEV *, 2> Key = F.BaseRegs;
1163 if (F.ScaledReg) Key.push_back(F.ScaledReg);
1164 // Unstable sort by host order ok, because this is only used for uniquifying.
1165 std::sort(Key.begin(), Key.end());
1166 return Uniquifier.count(Key);
1169 /// InsertFormula - If the given formula has not yet been inserted, add it to
1170 /// the list, and return true. Return false otherwise.
1171 bool LSRUse::InsertFormula(const Formula &F) {
1172 SmallVector<const SCEV *, 2> Key = F.BaseRegs;
1173 if (F.ScaledReg) Key.push_back(F.ScaledReg);
1174 // Unstable sort by host order ok, because this is only used for uniquifying.
1175 std::sort(Key.begin(), Key.end());
1177 if (!Uniquifier.insert(Key).second)
1180 // Using a register to hold the value of 0 is not profitable.
1181 assert((!F.ScaledReg || !F.ScaledReg->isZero()) &&
1182 "Zero allocated in a scaled register!");
1184 for (SmallVectorImpl<const SCEV *>::const_iterator I =
1185 F.BaseRegs.begin(), E = F.BaseRegs.end(); I != E; ++I)
1186 assert(!(*I)->isZero() && "Zero allocated in a base register!");
1189 // Add the formula to the list.
1190 Formulae.push_back(F);
1192 // Record registers now being used by this use.
1193 Regs.insert(F.BaseRegs.begin(), F.BaseRegs.end());
1198 /// DeleteFormula - Remove the given formula from this use's list.
1199 void LSRUse::DeleteFormula(Formula &F) {
1200 if (&F != &Formulae.back())
1201 std::swap(F, Formulae.back());
1202 Formulae.pop_back();
1205 /// RecomputeRegs - Recompute the Regs field, and update RegUses.
1206 void LSRUse::RecomputeRegs(size_t LUIdx, RegUseTracker &RegUses) {
1207 // Now that we've filtered out some formulae, recompute the Regs set.
1208 SmallPtrSet<const SCEV *, 4> OldRegs = Regs;
1210 for (SmallVectorImpl<Formula>::const_iterator I = Formulae.begin(),
1211 E = Formulae.end(); I != E; ++I) {
1212 const Formula &F = *I;
1213 if (F.ScaledReg) Regs.insert(F.ScaledReg);
1214 Regs.insert(F.BaseRegs.begin(), F.BaseRegs.end());
1217 // Update the RegTracker.
1218 for (SmallPtrSet<const SCEV *, 4>::iterator I = OldRegs.begin(),
1219 E = OldRegs.end(); I != E; ++I)
1220 if (!Regs.count(*I))
1221 RegUses.DropRegister(*I, LUIdx);
1224 void LSRUse::print(raw_ostream &OS) const {
1225 OS << "LSR Use: Kind=";
1227 case Basic: OS << "Basic"; break;
1228 case Special: OS << "Special"; break;
1229 case ICmpZero: OS << "ICmpZero"; break;
1231 OS << "Address of ";
1232 if (AccessTy->isPointerTy())
1233 OS << "pointer"; // the full pointer type could be really verbose
1238 OS << ", Offsets={";
1239 for (SmallVectorImpl<int64_t>::const_iterator I = Offsets.begin(),
1240 E = Offsets.end(); I != E; ++I) {
1242 if (llvm::next(I) != E)
1247 if (AllFixupsOutsideLoop)
1248 OS << ", all-fixups-outside-loop";
1250 if (WidestFixupType)
1251 OS << ", widest fixup type: " << *WidestFixupType;
1254 void LSRUse::dump() const {
1255 print(errs()); errs() << '\n';
1258 /// isLegalUse - Test whether the use described by AM is "legal", meaning it can
1259 /// be completely folded into the user instruction at isel time. This includes
1260 /// address-mode folding and special icmp tricks.
1261 static bool isLegalUse(const TargetLowering::AddrMode &AM,
1262 LSRUse::KindType Kind, Type *AccessTy,
1263 const TargetLowering *TLI) {
1265 case LSRUse::Address:
1266 // If we have low-level target information, ask the target if it can
1267 // completely fold this address.
1268 if (TLI) return TLI->isLegalAddressingMode(AM, AccessTy);
1270 // Otherwise, just guess that reg+reg addressing is legal.
1271 return !AM.BaseGV && AM.BaseOffs == 0 && AM.Scale <= 1;
1273 case LSRUse::ICmpZero:
1274 // There's not even a target hook for querying whether it would be legal to
1275 // fold a GV into an ICmp.
1279 // ICmp only has two operands; don't allow more than two non-trivial parts.
1280 if (AM.Scale != 0 && AM.HasBaseReg && AM.BaseOffs != 0)
1283 // ICmp only supports no scale or a -1 scale, as we can "fold" a -1 scale by
1284 // putting the scaled register in the other operand of the icmp.
1285 if (AM.Scale != 0 && AM.Scale != -1)
1288 // If we have low-level target information, ask the target if it can fold an
1289 // integer immediate on an icmp.
1290 if (AM.BaseOffs != 0) {
1294 // ICmpZero BaseReg + Offset => ICmp BaseReg, -Offset
1295 // ICmpZero -1*ScaleReg + Offset => ICmp ScaleReg, Offset
1296 // Offs is the ICmp immediate.
1297 int64_t Offs = AM.BaseOffs;
1299 Offs = -(uint64_t)Offs; // The cast does the right thing with INT64_MIN.
1300 return TLI->isLegalICmpImmediate(Offs);
1303 // ICmpZero BaseReg + -1*ScaleReg => ICmp BaseReg, ScaleReg
1307 // Only handle single-register values.
1308 return !AM.BaseGV && AM.Scale == 0 && AM.BaseOffs == 0;
1310 case LSRUse::Special:
1311 // Only handle -1 scales, or no scale.
1312 return AM.Scale == 0 || AM.Scale == -1;
1315 llvm_unreachable("Invalid LSRUse Kind!");
1318 static bool isLegalUse(TargetLowering::AddrMode AM,
1319 int64_t MinOffset, int64_t MaxOffset,
1320 LSRUse::KindType Kind, Type *AccessTy,
1321 const TargetLowering *TLI) {
1322 // Check for overflow.
1323 if (((int64_t)((uint64_t)AM.BaseOffs + MinOffset) > AM.BaseOffs) !=
1326 AM.BaseOffs = (uint64_t)AM.BaseOffs + MinOffset;
1327 if (isLegalUse(AM, Kind, AccessTy, TLI)) {
1328 AM.BaseOffs = (uint64_t)AM.BaseOffs - MinOffset;
1329 // Check for overflow.
1330 if (((int64_t)((uint64_t)AM.BaseOffs + MaxOffset) > AM.BaseOffs) !=
1333 AM.BaseOffs = (uint64_t)AM.BaseOffs + MaxOffset;
1334 return isLegalUse(AM, Kind, AccessTy, TLI);
1339 static bool isAlwaysFoldable(int64_t BaseOffs,
1340 GlobalValue *BaseGV,
1342 LSRUse::KindType Kind, Type *AccessTy,
1343 const TargetLowering *TLI) {
1344 // Fast-path: zero is always foldable.
1345 if (BaseOffs == 0 && !BaseGV) return true;
1347 // Conservatively, create an address with an immediate and a
1348 // base and a scale.
1349 TargetLowering::AddrMode AM;
1350 AM.BaseOffs = BaseOffs;
1352 AM.HasBaseReg = HasBaseReg;
1353 AM.Scale = Kind == LSRUse::ICmpZero ? -1 : 1;
1355 // Canonicalize a scale of 1 to a base register if the formula doesn't
1356 // already have a base register.
1357 if (!AM.HasBaseReg && AM.Scale == 1) {
1359 AM.HasBaseReg = true;
1362 return isLegalUse(AM, Kind, AccessTy, TLI);
1365 static bool isAlwaysFoldable(const SCEV *S,
1366 int64_t MinOffset, int64_t MaxOffset,
1368 LSRUse::KindType Kind, Type *AccessTy,
1369 const TargetLowering *TLI,
1370 ScalarEvolution &SE) {
1371 // Fast-path: zero is always foldable.
1372 if (S->isZero()) return true;
1374 // Conservatively, create an address with an immediate and a
1375 // base and a scale.
1376 int64_t BaseOffs = ExtractImmediate(S, SE);
1377 GlobalValue *BaseGV = ExtractSymbol(S, SE);
1379 // If there's anything else involved, it's not foldable.
1380 if (!S->isZero()) return false;
1382 // Fast-path: zero is always foldable.
1383 if (BaseOffs == 0 && !BaseGV) return true;
1385 // Conservatively, create an address with an immediate and a
1386 // base and a scale.
1387 TargetLowering::AddrMode AM;
1388 AM.BaseOffs = BaseOffs;
1390 AM.HasBaseReg = HasBaseReg;
1391 AM.Scale = Kind == LSRUse::ICmpZero ? -1 : 1;
1393 return isLegalUse(AM, MinOffset, MaxOffset, Kind, AccessTy, TLI);
1398 /// UseMapDenseMapInfo - A DenseMapInfo implementation for holding
1399 /// DenseMaps and DenseSets of pairs of const SCEV* and LSRUse::Kind.
1400 struct UseMapDenseMapInfo {
1401 static std::pair<const SCEV *, LSRUse::KindType> getEmptyKey() {
1402 return std::make_pair(reinterpret_cast<const SCEV *>(-1), LSRUse::Basic);
1405 static std::pair<const SCEV *, LSRUse::KindType> getTombstoneKey() {
1406 return std::make_pair(reinterpret_cast<const SCEV *>(-2), LSRUse::Basic);
1410 getHashValue(const std::pair<const SCEV *, LSRUse::KindType> &V) {
1411 unsigned Result = DenseMapInfo<const SCEV *>::getHashValue(V.first);
1412 Result ^= DenseMapInfo<unsigned>::getHashValue(unsigned(V.second));
1416 static bool isEqual(const std::pair<const SCEV *, LSRUse::KindType> &LHS,
1417 const std::pair<const SCEV *, LSRUse::KindType> &RHS) {
1422 /// IVInc - An individual increment in a Chain of IV increments.
1423 /// Relate an IV user to an expression that computes the IV it uses from the IV
1424 /// used by the previous link in the Chain.
1426 /// For the head of a chain, IncExpr holds the absolute SCEV expression for the
1427 /// original IVOperand. The head of the chain's IVOperand is only valid during
1428 /// chain collection, before LSR replaces IV users. During chain generation,
1429 /// IncExpr can be used to find the new IVOperand that computes the same
1432 Instruction *UserInst;
1434 const SCEV *IncExpr;
1436 IVInc(Instruction *U, Value *O, const SCEV *E):
1437 UserInst(U), IVOperand(O), IncExpr(E) {}
1440 // IVChain - The list of IV increments in program order.
1441 // We typically add the head of a chain without finding subsequent links.
1443 SmallVector<IVInc,1> Incs;
1445 typedef SmallVectorImpl<IVInc>::const_iterator const_iterator;
1447 // begin - return the first increment in the chain.
1448 const_iterator begin() const {
1449 assert(!Incs.empty());
1450 return llvm::next(Incs.begin());
1452 const_iterator end() const {
1456 // hasIncs - Returns true if this chain contains any increments.
1457 bool hasIncs() const { return Incs.size() >= 2; }
1459 // add - Add an IVInc to the end of this chain.
1460 void add(const IVInc &X) { Incs.push_back(X); }
1462 // tailUserInst - Returns the last UserInst in the chain.
1463 Instruction *tailUserInst() const { return Incs.back().UserInst; }
1466 /// ChainUsers - Helper for CollectChains to track multiple IV increment uses.
1467 /// Distinguish between FarUsers that definitely cross IV increments and
1468 /// NearUsers that may be used between IV increments.
1470 SmallPtrSet<Instruction*, 4> FarUsers;
1471 SmallPtrSet<Instruction*, 4> NearUsers;
1474 /// LSRInstance - This class holds state for the main loop strength reduction
1478 ScalarEvolution &SE;
1481 const TargetLowering *const TLI;
1485 /// IVIncInsertPos - This is the insert position that the current loop's
1486 /// induction variable increment should be placed. In simple loops, this is
1487 /// the latch block's terminator. But in more complicated cases, this is a
1488 /// position which will dominate all the in-loop post-increment users.
1489 Instruction *IVIncInsertPos;
1491 /// Factors - Interesting factors between use strides.
1492 SmallSetVector<int64_t, 8> Factors;
1494 /// Types - Interesting use types, to facilitate truncation reuse.
1495 SmallSetVector<Type *, 4> Types;
1497 /// Fixups - The list of operands which are to be replaced.
1498 SmallVector<LSRFixup, 16> Fixups;
1500 /// Uses - The list of interesting uses.
1501 SmallVector<LSRUse, 16> Uses;
1503 /// RegUses - Track which uses use which register candidates.
1504 RegUseTracker RegUses;
1506 // Limit the number of chains to avoid quadratic behavior. We don't expect to
1507 // have more than a few IV increment chains in a loop. Missing a Chain falls
1508 // back to normal LSR behavior for those uses.
1509 static const unsigned MaxChains = 8;
1511 /// IVChainVec - IV users can form a chain of IV increments.
1512 SmallVector<IVChain, MaxChains> IVChainVec;
1514 /// IVIncSet - IV users that belong to profitable IVChains.
1515 SmallPtrSet<Use*, MaxChains> IVIncSet;
1517 void OptimizeShadowIV();
1518 bool FindIVUserForCond(ICmpInst *Cond, IVStrideUse *&CondUse);
1519 ICmpInst *OptimizeMax(ICmpInst *Cond, IVStrideUse* &CondUse);
1520 void OptimizeLoopTermCond();
1522 void ChainInstruction(Instruction *UserInst, Instruction *IVOper,
1523 SmallVectorImpl<ChainUsers> &ChainUsersVec);
1524 void FinalizeChain(IVChain &Chain);
1525 void CollectChains();
1526 void GenerateIVChain(const IVChain &Chain, SCEVExpander &Rewriter,
1527 SmallVectorImpl<WeakVH> &DeadInsts);
1529 void CollectInterestingTypesAndFactors();
1530 void CollectFixupsAndInitialFormulae();
1532 LSRFixup &getNewFixup() {
1533 Fixups.push_back(LSRFixup());
1534 return Fixups.back();
1537 // Support for sharing of LSRUses between LSRFixups.
1538 typedef DenseMap<std::pair<const SCEV *, LSRUse::KindType>,
1540 UseMapDenseMapInfo> UseMapTy;
1543 bool reconcileNewOffset(LSRUse &LU, int64_t NewOffset, bool HasBaseReg,
1544 LSRUse::KindType Kind, Type *AccessTy);
1546 std::pair<size_t, int64_t> getUse(const SCEV *&Expr,
1547 LSRUse::KindType Kind,
1550 void DeleteUse(LSRUse &LU, size_t LUIdx);
1552 LSRUse *FindUseWithSimilarFormula(const Formula &F, const LSRUse &OrigLU);
1554 void InsertInitialFormula(const SCEV *S, LSRUse &LU, size_t LUIdx);
1555 void InsertSupplementalFormula(const SCEV *S, LSRUse &LU, size_t LUIdx);
1556 void CountRegisters(const Formula &F, size_t LUIdx);
1557 bool InsertFormula(LSRUse &LU, unsigned LUIdx, const Formula &F);
1559 void CollectLoopInvariantFixupsAndFormulae();
1561 void GenerateReassociations(LSRUse &LU, unsigned LUIdx, Formula Base,
1562 unsigned Depth = 0);
1563 void GenerateCombinations(LSRUse &LU, unsigned LUIdx, Formula Base);
1564 void GenerateSymbolicOffsets(LSRUse &LU, unsigned LUIdx, Formula Base);
1565 void GenerateConstantOffsets(LSRUse &LU, unsigned LUIdx, Formula Base);
1566 void GenerateICmpZeroScales(LSRUse &LU, unsigned LUIdx, Formula Base);
1567 void GenerateScales(LSRUse &LU, unsigned LUIdx, Formula Base);
1568 void GenerateTruncates(LSRUse &LU, unsigned LUIdx, Formula Base);
1569 void GenerateCrossUseConstantOffsets();
1570 void GenerateAllReuseFormulae();
1572 void FilterOutUndesirableDedicatedRegisters();
1574 size_t EstimateSearchSpaceComplexity() const;
1575 void NarrowSearchSpaceByDetectingSupersets();
1576 void NarrowSearchSpaceByCollapsingUnrolledCode();
1577 void NarrowSearchSpaceByRefilteringUndesirableDedicatedRegisters();
1578 void NarrowSearchSpaceByPickingWinnerRegs();
1579 void NarrowSearchSpaceUsingHeuristics();
1581 void SolveRecurse(SmallVectorImpl<const Formula *> &Solution,
1583 SmallVectorImpl<const Formula *> &Workspace,
1584 const Cost &CurCost,
1585 const SmallPtrSet<const SCEV *, 16> &CurRegs,
1586 DenseSet<const SCEV *> &VisitedRegs) const;
1587 void Solve(SmallVectorImpl<const Formula *> &Solution) const;
1589 BasicBlock::iterator
1590 HoistInsertPosition(BasicBlock::iterator IP,
1591 const SmallVectorImpl<Instruction *> &Inputs) const;
1592 BasicBlock::iterator
1593 AdjustInsertPositionForExpand(BasicBlock::iterator IP,
1596 SCEVExpander &Rewriter) const;
1598 Value *Expand(const LSRFixup &LF,
1600 BasicBlock::iterator IP,
1601 SCEVExpander &Rewriter,
1602 SmallVectorImpl<WeakVH> &DeadInsts) const;
1603 void RewriteForPHI(PHINode *PN, const LSRFixup &LF,
1605 SCEVExpander &Rewriter,
1606 SmallVectorImpl<WeakVH> &DeadInsts,
1608 void Rewrite(const LSRFixup &LF,
1610 SCEVExpander &Rewriter,
1611 SmallVectorImpl<WeakVH> &DeadInsts,
1613 void ImplementSolution(const SmallVectorImpl<const Formula *> &Solution,
1617 LSRInstance(const TargetLowering *tli, Loop *l, Pass *P);
1619 bool getChanged() const { return Changed; }
1621 void print_factors_and_types(raw_ostream &OS) const;
1622 void print_fixups(raw_ostream &OS) const;
1623 void print_uses(raw_ostream &OS) const;
1624 void print(raw_ostream &OS) const;
1630 /// OptimizeShadowIV - If IV is used in a int-to-float cast
1631 /// inside the loop then try to eliminate the cast operation.
1632 void LSRInstance::OptimizeShadowIV() {
1633 const SCEV *BackedgeTakenCount = SE.getBackedgeTakenCount(L);
1634 if (isa<SCEVCouldNotCompute>(BackedgeTakenCount))
1637 for (IVUsers::const_iterator UI = IU.begin(), E = IU.end();
1638 UI != E; /* empty */) {
1639 IVUsers::const_iterator CandidateUI = UI;
1641 Instruction *ShadowUse = CandidateUI->getUser();
1642 Type *DestTy = NULL;
1643 bool IsSigned = false;
1645 /* If shadow use is a int->float cast then insert a second IV
1646 to eliminate this cast.
1648 for (unsigned i = 0; i < n; ++i)
1654 for (unsigned i = 0; i < n; ++i, ++d)
1657 if (UIToFPInst *UCast = dyn_cast<UIToFPInst>(CandidateUI->getUser())) {
1659 DestTy = UCast->getDestTy();
1661 else if (SIToFPInst *SCast = dyn_cast<SIToFPInst>(CandidateUI->getUser())) {
1663 DestTy = SCast->getDestTy();
1665 if (!DestTy) continue;
1668 // If target does not support DestTy natively then do not apply
1669 // this transformation.
1670 EVT DVT = TLI->getValueType(DestTy);
1671 if (!TLI->isTypeLegal(DVT)) continue;
1674 PHINode *PH = dyn_cast<PHINode>(ShadowUse->getOperand(0));
1676 if (PH->getNumIncomingValues() != 2) continue;
1678 Type *SrcTy = PH->getType();
1679 int Mantissa = DestTy->getFPMantissaWidth();
1680 if (Mantissa == -1) continue;
1681 if ((int)SE.getTypeSizeInBits(SrcTy) > Mantissa)
1684 unsigned Entry, Latch;
1685 if (PH->getIncomingBlock(0) == L->getLoopPreheader()) {
1693 ConstantInt *Init = dyn_cast<ConstantInt>(PH->getIncomingValue(Entry));
1694 if (!Init) continue;
1695 Constant *NewInit = ConstantFP::get(DestTy, IsSigned ?
1696 (double)Init->getSExtValue() :
1697 (double)Init->getZExtValue());
1699 BinaryOperator *Incr =
1700 dyn_cast<BinaryOperator>(PH->getIncomingValue(Latch));
1701 if (!Incr) continue;
1702 if (Incr->getOpcode() != Instruction::Add
1703 && Incr->getOpcode() != Instruction::Sub)
1706 /* Initialize new IV, double d = 0.0 in above example. */
1707 ConstantInt *C = NULL;
1708 if (Incr->getOperand(0) == PH)
1709 C = dyn_cast<ConstantInt>(Incr->getOperand(1));
1710 else if (Incr->getOperand(1) == PH)
1711 C = dyn_cast<ConstantInt>(Incr->getOperand(0));
1717 // Ignore negative constants, as the code below doesn't handle them
1718 // correctly. TODO: Remove this restriction.
1719 if (!C->getValue().isStrictlyPositive()) continue;
1721 /* Add new PHINode. */
1722 PHINode *NewPH = PHINode::Create(DestTy, 2, "IV.S.", PH);
1724 /* create new increment. '++d' in above example. */
1725 Constant *CFP = ConstantFP::get(DestTy, C->getZExtValue());
1726 BinaryOperator *NewIncr =
1727 BinaryOperator::Create(Incr->getOpcode() == Instruction::Add ?
1728 Instruction::FAdd : Instruction::FSub,
1729 NewPH, CFP, "IV.S.next.", Incr);
1731 NewPH->addIncoming(NewInit, PH->getIncomingBlock(Entry));
1732 NewPH->addIncoming(NewIncr, PH->getIncomingBlock(Latch));
1734 /* Remove cast operation */
1735 ShadowUse->replaceAllUsesWith(NewPH);
1736 ShadowUse->eraseFromParent();
1742 /// FindIVUserForCond - If Cond has an operand that is an expression of an IV,
1743 /// set the IV user and stride information and return true, otherwise return
1745 bool LSRInstance::FindIVUserForCond(ICmpInst *Cond, IVStrideUse *&CondUse) {
1746 for (IVUsers::iterator UI = IU.begin(), E = IU.end(); UI != E; ++UI)
1747 if (UI->getUser() == Cond) {
1748 // NOTE: we could handle setcc instructions with multiple uses here, but
1749 // InstCombine does it as well for simple uses, it's not clear that it
1750 // occurs enough in real life to handle.
1757 /// OptimizeMax - Rewrite the loop's terminating condition if it uses
1758 /// a max computation.
1760 /// This is a narrow solution to a specific, but acute, problem. For loops
1766 /// } while (++i < n);
1768 /// the trip count isn't just 'n', because 'n' might not be positive. And
1769 /// unfortunately this can come up even for loops where the user didn't use
1770 /// a C do-while loop. For example, seemingly well-behaved top-test loops
1771 /// will commonly be lowered like this:
1777 /// } while (++i < n);
1780 /// and then it's possible for subsequent optimization to obscure the if
1781 /// test in such a way that indvars can't find it.
1783 /// When indvars can't find the if test in loops like this, it creates a
1784 /// max expression, which allows it to give the loop a canonical
1785 /// induction variable:
1788 /// max = n < 1 ? 1 : n;
1791 /// } while (++i != max);
1793 /// Canonical induction variables are necessary because the loop passes
1794 /// are designed around them. The most obvious example of this is the
1795 /// LoopInfo analysis, which doesn't remember trip count values. It
1796 /// expects to be able to rediscover the trip count each time it is
1797 /// needed, and it does this using a simple analysis that only succeeds if
1798 /// the loop has a canonical induction variable.
1800 /// However, when it comes time to generate code, the maximum operation
1801 /// can be quite costly, especially if it's inside of an outer loop.
1803 /// This function solves this problem by detecting this type of loop and
1804 /// rewriting their conditions from ICMP_NE back to ICMP_SLT, and deleting
1805 /// the instructions for the maximum computation.
1807 ICmpInst *LSRInstance::OptimizeMax(ICmpInst *Cond, IVStrideUse* &CondUse) {
1808 // Check that the loop matches the pattern we're looking for.
1809 if (Cond->getPredicate() != CmpInst::ICMP_EQ &&
1810 Cond->getPredicate() != CmpInst::ICMP_NE)
1813 SelectInst *Sel = dyn_cast<SelectInst>(Cond->getOperand(1));
1814 if (!Sel || !Sel->hasOneUse()) return Cond;
1816 const SCEV *BackedgeTakenCount = SE.getBackedgeTakenCount(L);
1817 if (isa<SCEVCouldNotCompute>(BackedgeTakenCount))
1819 const SCEV *One = SE.getConstant(BackedgeTakenCount->getType(), 1);
1821 // Add one to the backedge-taken count to get the trip count.
1822 const SCEV *IterationCount = SE.getAddExpr(One, BackedgeTakenCount);
1823 if (IterationCount != SE.getSCEV(Sel)) return Cond;
1825 // Check for a max calculation that matches the pattern. There's no check
1826 // for ICMP_ULE here because the comparison would be with zero, which
1827 // isn't interesting.
1828 CmpInst::Predicate Pred = ICmpInst::BAD_ICMP_PREDICATE;
1829 const SCEVNAryExpr *Max = 0;
1830 if (const SCEVSMaxExpr *S = dyn_cast<SCEVSMaxExpr>(BackedgeTakenCount)) {
1831 Pred = ICmpInst::ICMP_SLE;
1833 } else if (const SCEVSMaxExpr *S = dyn_cast<SCEVSMaxExpr>(IterationCount)) {
1834 Pred = ICmpInst::ICMP_SLT;
1836 } else if (const SCEVUMaxExpr *U = dyn_cast<SCEVUMaxExpr>(IterationCount)) {
1837 Pred = ICmpInst::ICMP_ULT;
1844 // To handle a max with more than two operands, this optimization would
1845 // require additional checking and setup.
1846 if (Max->getNumOperands() != 2)
1849 const SCEV *MaxLHS = Max->getOperand(0);
1850 const SCEV *MaxRHS = Max->getOperand(1);
1852 // ScalarEvolution canonicalizes constants to the left. For < and >, look
1853 // for a comparison with 1. For <= and >=, a comparison with zero.
1855 (ICmpInst::isTrueWhenEqual(Pred) ? !MaxLHS->isZero() : (MaxLHS != One)))
1858 // Check the relevant induction variable for conformance to
1860 const SCEV *IV = SE.getSCEV(Cond->getOperand(0));
1861 const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(IV);
1862 if (!AR || !AR->isAffine() ||
1863 AR->getStart() != One ||
1864 AR->getStepRecurrence(SE) != One)
1867 assert(AR->getLoop() == L &&
1868 "Loop condition operand is an addrec in a different loop!");
1870 // Check the right operand of the select, and remember it, as it will
1871 // be used in the new comparison instruction.
1873 if (ICmpInst::isTrueWhenEqual(Pred)) {
1874 // Look for n+1, and grab n.
1875 if (AddOperator *BO = dyn_cast<AddOperator>(Sel->getOperand(1)))
1876 if (isa<ConstantInt>(BO->getOperand(1)) &&
1877 cast<ConstantInt>(BO->getOperand(1))->isOne() &&
1878 SE.getSCEV(BO->getOperand(0)) == MaxRHS)
1879 NewRHS = BO->getOperand(0);
1880 if (AddOperator *BO = dyn_cast<AddOperator>(Sel->getOperand(2)))
1881 if (isa<ConstantInt>(BO->getOperand(1)) &&
1882 cast<ConstantInt>(BO->getOperand(1))->isOne() &&
1883 SE.getSCEV(BO->getOperand(0)) == MaxRHS)
1884 NewRHS = BO->getOperand(0);
1887 } else if (SE.getSCEV(Sel->getOperand(1)) == MaxRHS)
1888 NewRHS = Sel->getOperand(1);
1889 else if (SE.getSCEV(Sel->getOperand(2)) == MaxRHS)
1890 NewRHS = Sel->getOperand(2);
1891 else if (const SCEVUnknown *SU = dyn_cast<SCEVUnknown>(MaxRHS))
1892 NewRHS = SU->getValue();
1894 // Max doesn't match expected pattern.
1897 // Determine the new comparison opcode. It may be signed or unsigned,
1898 // and the original comparison may be either equality or inequality.
1899 if (Cond->getPredicate() == CmpInst::ICMP_EQ)
1900 Pred = CmpInst::getInversePredicate(Pred);
1902 // Ok, everything looks ok to change the condition into an SLT or SGE and
1903 // delete the max calculation.
1905 new ICmpInst(Cond, Pred, Cond->getOperand(0), NewRHS, "scmp");
1907 // Delete the max calculation instructions.
1908 Cond->replaceAllUsesWith(NewCond);
1909 CondUse->setUser(NewCond);
1910 Instruction *Cmp = cast<Instruction>(Sel->getOperand(0));
1911 Cond->eraseFromParent();
1912 Sel->eraseFromParent();
1913 if (Cmp->use_empty())
1914 Cmp->eraseFromParent();
1918 /// OptimizeLoopTermCond - Change loop terminating condition to use the
1919 /// postinc iv when possible.
1921 LSRInstance::OptimizeLoopTermCond() {
1922 SmallPtrSet<Instruction *, 4> PostIncs;
1924 BasicBlock *LatchBlock = L->getLoopLatch();
1925 SmallVector<BasicBlock*, 8> ExitingBlocks;
1926 L->getExitingBlocks(ExitingBlocks);
1928 for (unsigned i = 0, e = ExitingBlocks.size(); i != e; ++i) {
1929 BasicBlock *ExitingBlock = ExitingBlocks[i];
1931 // Get the terminating condition for the loop if possible. If we
1932 // can, we want to change it to use a post-incremented version of its
1933 // induction variable, to allow coalescing the live ranges for the IV into
1934 // one register value.
1936 BranchInst *TermBr = dyn_cast<BranchInst>(ExitingBlock->getTerminator());
1939 // FIXME: Overly conservative, termination condition could be an 'or' etc..
1940 if (TermBr->isUnconditional() || !isa<ICmpInst>(TermBr->getCondition()))
1943 // Search IVUsesByStride to find Cond's IVUse if there is one.
1944 IVStrideUse *CondUse = 0;
1945 ICmpInst *Cond = cast<ICmpInst>(TermBr->getCondition());
1946 if (!FindIVUserForCond(Cond, CondUse))
1949 // If the trip count is computed in terms of a max (due to ScalarEvolution
1950 // being unable to find a sufficient guard, for example), change the loop
1951 // comparison to use SLT or ULT instead of NE.
1952 // One consequence of doing this now is that it disrupts the count-down
1953 // optimization. That's not always a bad thing though, because in such
1954 // cases it may still be worthwhile to avoid a max.
1955 Cond = OptimizeMax(Cond, CondUse);
1957 // If this exiting block dominates the latch block, it may also use
1958 // the post-inc value if it won't be shared with other uses.
1959 // Check for dominance.
1960 if (!DT.dominates(ExitingBlock, LatchBlock))
1963 // Conservatively avoid trying to use the post-inc value in non-latch
1964 // exits if there may be pre-inc users in intervening blocks.
1965 if (LatchBlock != ExitingBlock)
1966 for (IVUsers::const_iterator UI = IU.begin(), E = IU.end(); UI != E; ++UI)
1967 // Test if the use is reachable from the exiting block. This dominator
1968 // query is a conservative approximation of reachability.
1969 if (&*UI != CondUse &&
1970 !DT.properlyDominates(UI->getUser()->getParent(), ExitingBlock)) {
1971 // Conservatively assume there may be reuse if the quotient of their
1972 // strides could be a legal scale.
1973 const SCEV *A = IU.getStride(*CondUse, L);
1974 const SCEV *B = IU.getStride(*UI, L);
1975 if (!A || !B) continue;
1976 if (SE.getTypeSizeInBits(A->getType()) !=
1977 SE.getTypeSizeInBits(B->getType())) {
1978 if (SE.getTypeSizeInBits(A->getType()) >
1979 SE.getTypeSizeInBits(B->getType()))
1980 B = SE.getSignExtendExpr(B, A->getType());
1982 A = SE.getSignExtendExpr(A, B->getType());
1984 if (const SCEVConstant *D =
1985 dyn_cast_or_null<SCEVConstant>(getExactSDiv(B, A, SE))) {
1986 const ConstantInt *C = D->getValue();
1987 // Stride of one or negative one can have reuse with non-addresses.
1988 if (C->isOne() || C->isAllOnesValue())
1989 goto decline_post_inc;
1990 // Avoid weird situations.
1991 if (C->getValue().getMinSignedBits() >= 64 ||
1992 C->getValue().isMinSignedValue())
1993 goto decline_post_inc;
1994 // Without TLI, assume that any stride might be valid, and so any
1995 // use might be shared.
1997 goto decline_post_inc;
1998 // Check for possible scaled-address reuse.
1999 Type *AccessTy = getAccessType(UI->getUser());
2000 TargetLowering::AddrMode AM;
2001 AM.Scale = C->getSExtValue();
2002 if (TLI->isLegalAddressingMode(AM, AccessTy))
2003 goto decline_post_inc;
2004 AM.Scale = -AM.Scale;
2005 if (TLI->isLegalAddressingMode(AM, AccessTy))
2006 goto decline_post_inc;
2010 DEBUG(dbgs() << " Change loop exiting icmp to use postinc iv: "
2013 // It's possible for the setcc instruction to be anywhere in the loop, and
2014 // possible for it to have multiple users. If it is not immediately before
2015 // the exiting block branch, move it.
2016 if (&*++BasicBlock::iterator(Cond) != TermBr) {
2017 if (Cond->hasOneUse()) {
2018 Cond->moveBefore(TermBr);
2020 // Clone the terminating condition and insert into the loopend.
2021 ICmpInst *OldCond = Cond;
2022 Cond = cast<ICmpInst>(Cond->clone());
2023 Cond->setName(L->getHeader()->getName() + ".termcond");
2024 ExitingBlock->getInstList().insert(TermBr, Cond);
2026 // Clone the IVUse, as the old use still exists!
2027 CondUse = &IU.AddUser(Cond, CondUse->getOperandValToReplace());
2028 TermBr->replaceUsesOfWith(OldCond, Cond);
2032 // If we get to here, we know that we can transform the setcc instruction to
2033 // use the post-incremented version of the IV, allowing us to coalesce the
2034 // live ranges for the IV correctly.
2035 CondUse->transformToPostInc(L);
2038 PostIncs.insert(Cond);
2042 // Determine an insertion point for the loop induction variable increment. It
2043 // must dominate all the post-inc comparisons we just set up, and it must
2044 // dominate the loop latch edge.
2045 IVIncInsertPos = L->getLoopLatch()->getTerminator();
2046 for (SmallPtrSet<Instruction *, 4>::const_iterator I = PostIncs.begin(),
2047 E = PostIncs.end(); I != E; ++I) {
2049 DT.findNearestCommonDominator(IVIncInsertPos->getParent(),
2051 if (BB == (*I)->getParent())
2052 IVIncInsertPos = *I;
2053 else if (BB != IVIncInsertPos->getParent())
2054 IVIncInsertPos = BB->getTerminator();
2058 /// reconcileNewOffset - Determine if the given use can accommodate a fixup
2059 /// at the given offset and other details. If so, update the use and
2062 LSRInstance::reconcileNewOffset(LSRUse &LU, int64_t NewOffset, bool HasBaseReg,
2063 LSRUse::KindType Kind, Type *AccessTy) {
2064 int64_t NewMinOffset = LU.MinOffset;
2065 int64_t NewMaxOffset = LU.MaxOffset;
2066 Type *NewAccessTy = AccessTy;
2068 // Check for a mismatched kind. It's tempting to collapse mismatched kinds to
2069 // something conservative, however this can pessimize in the case that one of
2070 // the uses will have all its uses outside the loop, for example.
2071 if (LU.Kind != Kind)
2073 // Conservatively assume HasBaseReg is true for now.
2074 if (NewOffset < LU.MinOffset) {
2075 if (!isAlwaysFoldable(LU.MaxOffset - NewOffset, 0, HasBaseReg,
2076 Kind, AccessTy, TLI))
2078 NewMinOffset = NewOffset;
2079 } else if (NewOffset > LU.MaxOffset) {
2080 if (!isAlwaysFoldable(NewOffset - LU.MinOffset, 0, HasBaseReg,
2081 Kind, AccessTy, TLI))
2083 NewMaxOffset = NewOffset;
2085 // Check for a mismatched access type, and fall back conservatively as needed.
2086 // TODO: Be less conservative when the type is similar and can use the same
2087 // addressing modes.
2088 if (Kind == LSRUse::Address && AccessTy != LU.AccessTy)
2089 NewAccessTy = Type::getVoidTy(AccessTy->getContext());
2092 LU.MinOffset = NewMinOffset;
2093 LU.MaxOffset = NewMaxOffset;
2094 LU.AccessTy = NewAccessTy;
2095 if (NewOffset != LU.Offsets.back())
2096 LU.Offsets.push_back(NewOffset);
2100 /// getUse - Return an LSRUse index and an offset value for a fixup which
2101 /// needs the given expression, with the given kind and optional access type.
2102 /// Either reuse an existing use or create a new one, as needed.
2103 std::pair<size_t, int64_t>
2104 LSRInstance::getUse(const SCEV *&Expr,
2105 LSRUse::KindType Kind, Type *AccessTy) {
2106 const SCEV *Copy = Expr;
2107 int64_t Offset = ExtractImmediate(Expr, SE);
2109 // Basic uses can't accept any offset, for example.
2110 if (!isAlwaysFoldable(Offset, 0, /*HasBaseReg=*/true, Kind, AccessTy, TLI)) {
2115 std::pair<UseMapTy::iterator, bool> P =
2116 UseMap.insert(std::make_pair(std::make_pair(Expr, Kind), 0));
2118 // A use already existed with this base.
2119 size_t LUIdx = P.first->second;
2120 LSRUse &LU = Uses[LUIdx];
2121 if (reconcileNewOffset(LU, Offset, /*HasBaseReg=*/true, Kind, AccessTy))
2123 return std::make_pair(LUIdx, Offset);
2126 // Create a new use.
2127 size_t LUIdx = Uses.size();
2128 P.first->second = LUIdx;
2129 Uses.push_back(LSRUse(Kind, AccessTy));
2130 LSRUse &LU = Uses[LUIdx];
2132 // We don't need to track redundant offsets, but we don't need to go out
2133 // of our way here to avoid them.
2134 if (LU.Offsets.empty() || Offset != LU.Offsets.back())
2135 LU.Offsets.push_back(Offset);
2137 LU.MinOffset = Offset;
2138 LU.MaxOffset = Offset;
2139 return std::make_pair(LUIdx, Offset);
2142 /// DeleteUse - Delete the given use from the Uses list.
2143 void LSRInstance::DeleteUse(LSRUse &LU, size_t LUIdx) {
2144 if (&LU != &Uses.back())
2145 std::swap(LU, Uses.back());
2149 RegUses.SwapAndDropUse(LUIdx, Uses.size());
2152 /// FindUseWithFormula - Look for a use distinct from OrigLU which is has
2153 /// a formula that has the same registers as the given formula.
2155 LSRInstance::FindUseWithSimilarFormula(const Formula &OrigF,
2156 const LSRUse &OrigLU) {
2157 // Search all uses for the formula. This could be more clever.
2158 for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
2159 LSRUse &LU = Uses[LUIdx];
2160 // Check whether this use is close enough to OrigLU, to see whether it's
2161 // worthwhile looking through its formulae.
2162 // Ignore ICmpZero uses because they may contain formulae generated by
2163 // GenerateICmpZeroScales, in which case adding fixup offsets may
2165 if (&LU != &OrigLU &&
2166 LU.Kind != LSRUse::ICmpZero &&
2167 LU.Kind == OrigLU.Kind && OrigLU.AccessTy == LU.AccessTy &&
2168 LU.WidestFixupType == OrigLU.WidestFixupType &&
2169 LU.HasFormulaWithSameRegs(OrigF)) {
2170 // Scan through this use's formulae.
2171 for (SmallVectorImpl<Formula>::const_iterator I = LU.Formulae.begin(),
2172 E = LU.Formulae.end(); I != E; ++I) {
2173 const Formula &F = *I;
2174 // Check to see if this formula has the same registers and symbols
2176 if (F.BaseRegs == OrigF.BaseRegs &&
2177 F.ScaledReg == OrigF.ScaledReg &&
2178 F.AM.BaseGV == OrigF.AM.BaseGV &&
2179 F.AM.Scale == OrigF.AM.Scale &&
2180 F.UnfoldedOffset == OrigF.UnfoldedOffset) {
2181 if (F.AM.BaseOffs == 0)
2183 // This is the formula where all the registers and symbols matched;
2184 // there aren't going to be any others. Since we declined it, we
2185 // can skip the rest of the formulae and procede to the next LSRUse.
2192 // Nothing looked good.
2196 void LSRInstance::CollectInterestingTypesAndFactors() {
2197 SmallSetVector<const SCEV *, 4> Strides;
2199 // Collect interesting types and strides.
2200 SmallVector<const SCEV *, 4> Worklist;
2201 for (IVUsers::const_iterator UI = IU.begin(), E = IU.end(); UI != E; ++UI) {
2202 const SCEV *Expr = IU.getExpr(*UI);
2204 // Collect interesting types.
2205 Types.insert(SE.getEffectiveSCEVType(Expr->getType()));
2207 // Add strides for mentioned loops.
2208 Worklist.push_back(Expr);
2210 const SCEV *S = Worklist.pop_back_val();
2211 if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S)) {
2212 if (AR->getLoop() == L)
2213 Strides.insert(AR->getStepRecurrence(SE));
2214 Worklist.push_back(AR->getStart());
2215 } else if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
2216 Worklist.append(Add->op_begin(), Add->op_end());
2218 } while (!Worklist.empty());
2221 // Compute interesting factors from the set of interesting strides.
2222 for (SmallSetVector<const SCEV *, 4>::const_iterator
2223 I = Strides.begin(), E = Strides.end(); I != E; ++I)
2224 for (SmallSetVector<const SCEV *, 4>::const_iterator NewStrideIter =
2225 llvm::next(I); NewStrideIter != E; ++NewStrideIter) {
2226 const SCEV *OldStride = *I;
2227 const SCEV *NewStride = *NewStrideIter;
2229 if (SE.getTypeSizeInBits(OldStride->getType()) !=
2230 SE.getTypeSizeInBits(NewStride->getType())) {
2231 if (SE.getTypeSizeInBits(OldStride->getType()) >
2232 SE.getTypeSizeInBits(NewStride->getType()))
2233 NewStride = SE.getSignExtendExpr(NewStride, OldStride->getType());
2235 OldStride = SE.getSignExtendExpr(OldStride, NewStride->getType());
2237 if (const SCEVConstant *Factor =
2238 dyn_cast_or_null<SCEVConstant>(getExactSDiv(NewStride, OldStride,
2240 if (Factor->getValue()->getValue().getMinSignedBits() <= 64)
2241 Factors.insert(Factor->getValue()->getValue().getSExtValue());
2242 } else if (const SCEVConstant *Factor =
2243 dyn_cast_or_null<SCEVConstant>(getExactSDiv(OldStride,
2246 if (Factor->getValue()->getValue().getMinSignedBits() <= 64)
2247 Factors.insert(Factor->getValue()->getValue().getSExtValue());
2251 // If all uses use the same type, don't bother looking for truncation-based
2253 if (Types.size() == 1)
2256 DEBUG(print_factors_and_types(dbgs()));
2259 /// findIVOperand - Helper for CollectChains that finds an IV operand (computed
2260 /// by an AddRec in this loop) within [OI,OE) or returns OE. If IVUsers mapped
2261 /// Instructions to IVStrideUses, we could partially skip this.
2262 static User::op_iterator
2263 findIVOperand(User::op_iterator OI, User::op_iterator OE,
2264 Loop *L, ScalarEvolution &SE) {
2265 for(; OI != OE; ++OI) {
2266 if (Instruction *Oper = dyn_cast<Instruction>(*OI)) {
2267 if (!SE.isSCEVable(Oper->getType()))
2270 if (const SCEVAddRecExpr *AR =
2271 dyn_cast<SCEVAddRecExpr>(SE.getSCEV(Oper))) {
2272 if (AR->getLoop() == L)
2280 /// getWideOperand - IVChain logic must consistenctly peek base TruncInst
2281 /// operands, so wrap it in a convenient helper.
2282 static Value *getWideOperand(Value *Oper) {
2283 if (TruncInst *Trunc = dyn_cast<TruncInst>(Oper))
2284 return Trunc->getOperand(0);
2288 /// isCompatibleIVType - Return true if we allow an IV chain to include both
2290 static bool isCompatibleIVType(Value *LVal, Value *RVal) {
2291 Type *LType = LVal->getType();
2292 Type *RType = RVal->getType();
2293 return (LType == RType) || (LType->isPointerTy() && RType->isPointerTy());
2296 /// getExprBase - Return an approximation of this SCEV expression's "base", or
2297 /// NULL for any constant. Returning the expression itself is
2298 /// conservative. Returning a deeper subexpression is more precise and valid as
2299 /// long as it isn't less complex than another subexpression. For expressions
2300 /// involving multiple unscaled values, we need to return the pointer-type
2301 /// SCEVUnknown. This avoids forming chains across objects, such as:
2302 /// PrevOper==a[i], IVOper==b[i], IVInc==b-a.
2304 /// Since SCEVUnknown is the rightmost type, and pointers are the rightmost
2305 /// SCEVUnknown, we simply return the rightmost SCEV operand.
2306 static const SCEV *getExprBase(const SCEV *S) {
2307 switch (S->getSCEVType()) {
2308 default: // uncluding scUnknown.
2313 return getExprBase(cast<SCEVTruncateExpr>(S)->getOperand());
2315 return getExprBase(cast<SCEVZeroExtendExpr>(S)->getOperand());
2317 return getExprBase(cast<SCEVSignExtendExpr>(S)->getOperand());
2319 // Skip over scaled operands (scMulExpr) to follow add operands as long as
2320 // there's nothing more complex.
2321 // FIXME: not sure if we want to recognize negation.
2322 const SCEVAddExpr *Add = cast<SCEVAddExpr>(S);
2323 for (std::reverse_iterator<SCEVAddExpr::op_iterator> I(Add->op_end()),
2324 E(Add->op_begin()); I != E; ++I) {
2325 const SCEV *SubExpr = *I;
2326 if (SubExpr->getSCEVType() == scAddExpr)
2327 return getExprBase(SubExpr);
2329 if (SubExpr->getSCEVType() != scMulExpr)
2332 return S; // all operands are scaled, be conservative.
2335 return getExprBase(cast<SCEVAddRecExpr>(S)->getStart());
2339 /// Return true if the chain increment is profitable to expand into a loop
2340 /// invariant value, which may require its own register. A profitable chain
2341 /// increment will be an offset relative to the same base. We allow such offsets
2342 /// to potentially be used as chain increment as long as it's not obviously
2343 /// expensive to expand using real instructions.
2345 getProfitableChainIncrement(Value *NextIV, Value *PrevIV,
2346 const IVChain &Chain, Loop *L,
2347 ScalarEvolution &SE, const TargetLowering *TLI) {
2348 // Prune the solution space aggressively by checking that both IV operands
2349 // are expressions that operate on the same unscaled SCEVUnknown. This
2350 // "base" will be canceled by the subsequent getMinusSCEV call. Checking first
2351 // avoids creating extra SCEV expressions.
2352 const SCEV *OperExpr = SE.getSCEV(NextIV);
2353 const SCEV *PrevExpr = SE.getSCEV(PrevIV);
2354 if (getExprBase(OperExpr) != getExprBase(PrevExpr) && !StressIVChain)
2357 const SCEV *IncExpr = SE.getMinusSCEV(OperExpr, PrevExpr);
2358 if (!SE.isLoopInvariant(IncExpr, L))
2361 // We are not able to expand an increment unless it is loop invariant,
2362 // however, the following checks are purely for profitability.
2366 // Do not replace a constant offset from IV head with a nonconstant IV
2368 if (!isa<SCEVConstant>(IncExpr)) {
2369 const SCEV *HeadExpr = SE.getSCEV(getWideOperand(Chain.Incs[0].IVOperand));
2370 if (isa<SCEVConstant>(SE.getMinusSCEV(OperExpr, HeadExpr)))
2374 SmallPtrSet<const SCEV*, 8> Processed;
2375 if (isHighCostExpansion(IncExpr, Processed, SE))
2381 /// Return true if the number of registers needed for the chain is estimated to
2382 /// be less than the number required for the individual IV users. First prohibit
2383 /// any IV users that keep the IV live across increments (the Users set should
2384 /// be empty). Next count the number and type of increments in the chain.
2386 /// Chaining IVs can lead to considerable code bloat if ISEL doesn't
2387 /// effectively use postinc addressing modes. Only consider it profitable it the
2388 /// increments can be computed in fewer registers when chained.
2390 /// TODO: Consider IVInc free if it's already used in another chains.
2392 isProfitableChain(IVChain &Chain, SmallPtrSet<Instruction*, 4> &Users,
2393 ScalarEvolution &SE, const TargetLowering *TLI) {
2397 if (!Chain.hasIncs())
2400 if (!Users.empty()) {
2401 DEBUG(dbgs() << "Chain: " << *Chain.Incs[0].UserInst << " users:\n";
2402 for (SmallPtrSet<Instruction*, 4>::const_iterator I = Users.begin(),
2403 E = Users.end(); I != E; ++I) {
2404 dbgs() << " " << **I << "\n";
2408 assert(!Chain.Incs.empty() && "empty IV chains are not allowed");
2410 // The chain itself may require a register, so intialize cost to 1.
2413 // A complete chain likely eliminates the need for keeping the original IV in
2414 // a register. LSR does not currently know how to form a complete chain unless
2415 // the header phi already exists.
2416 if (isa<PHINode>(Chain.tailUserInst())
2417 && SE.getSCEV(Chain.tailUserInst()) == Chain.Incs[0].IncExpr) {
2420 const SCEV *LastIncExpr = 0;
2421 unsigned NumConstIncrements = 0;
2422 unsigned NumVarIncrements = 0;
2423 unsigned NumReusedIncrements = 0;
2424 for (IVChain::const_iterator I = Chain.begin(), E = Chain.end();
2427 if (I->IncExpr->isZero())
2430 // Incrementing by zero or some constant is neutral. We assume constants can
2431 // be folded into an addressing mode or an add's immediate operand.
2432 if (isa<SCEVConstant>(I->IncExpr)) {
2433 ++NumConstIncrements;
2437 if (I->IncExpr == LastIncExpr)
2438 ++NumReusedIncrements;
2442 LastIncExpr = I->IncExpr;
2444 // An IV chain with a single increment is handled by LSR's postinc
2445 // uses. However, a chain with multiple increments requires keeping the IV's
2446 // value live longer than it needs to be if chained.
2447 if (NumConstIncrements > 1)
2450 // Materializing increment expressions in the preheader that didn't exist in
2451 // the original code may cost a register. For example, sign-extended array
2452 // indices can produce ridiculous increments like this:
2453 // IV + ((sext i32 (2 * %s) to i64) + (-1 * (sext i32 %s to i64)))
2454 cost += NumVarIncrements;
2456 // Reusing variable increments likely saves a register to hold the multiple of
2458 cost -= NumReusedIncrements;
2460 DEBUG(dbgs() << "Chain: " << *Chain.Incs[0].UserInst << " Cost: " << cost
2466 /// ChainInstruction - Add this IV user to an existing chain or make it the head
2468 void LSRInstance::ChainInstruction(Instruction *UserInst, Instruction *IVOper,
2469 SmallVectorImpl<ChainUsers> &ChainUsersVec) {
2470 // When IVs are used as types of varying widths, they are generally converted
2471 // to a wider type with some uses remaining narrow under a (free) trunc.
2472 Value *NextIV = getWideOperand(IVOper);
2474 // Visit all existing chains. Check if its IVOper can be computed as a
2475 // profitable loop invariant increment from the last link in the Chain.
2476 unsigned ChainIdx = 0, NChains = IVChainVec.size();
2477 const SCEV *LastIncExpr = 0;
2478 for (; ChainIdx < NChains; ++ChainIdx) {
2479 Value *PrevIV = getWideOperand(IVChainVec[ChainIdx].Incs.back().IVOperand);
2480 if (!isCompatibleIVType(PrevIV, NextIV))
2483 // A phi node terminates a chain.
2484 if (isa<PHINode>(UserInst)
2485 && isa<PHINode>(IVChainVec[ChainIdx].tailUserInst()))
2488 if (const SCEV *IncExpr =
2489 getProfitableChainIncrement(NextIV, PrevIV, IVChainVec[ChainIdx],
2491 LastIncExpr = IncExpr;
2495 // If we haven't found a chain, create a new one, unless we hit the max. Don't
2496 // bother for phi nodes, because they must be last in the chain.
2497 if (ChainIdx == NChains) {
2498 if (isa<PHINode>(UserInst))
2500 if (NChains >= MaxChains && !StressIVChain) {
2501 DEBUG(dbgs() << "IV Chain Limit\n");
2504 LastIncExpr = SE.getSCEV(NextIV);
2505 // IVUsers may have skipped over sign/zero extensions. We don't currently
2506 // attempt to form chains involving extensions unless they can be hoisted
2507 // into this loop's AddRec.
2508 if (!isa<SCEVAddRecExpr>(LastIncExpr))
2511 IVChainVec.resize(NChains);
2512 ChainUsersVec.resize(NChains);
2513 DEBUG(dbgs() << "IV Chain#" << ChainIdx << " Head: (" << *UserInst
2514 << ") IV=" << *LastIncExpr << "\n");
2517 DEBUG(dbgs() << "IV Chain#" << ChainIdx << " Inc: (" << *UserInst
2518 << ") IV+" << *LastIncExpr << "\n");
2520 // Add this IV user to the end of the chain.
2521 IVChainVec[ChainIdx].add(IVInc(UserInst, IVOper, LastIncExpr));
2523 SmallPtrSet<Instruction*,4> &NearUsers = ChainUsersVec[ChainIdx].NearUsers;
2524 // This chain's NearUsers become FarUsers.
2525 if (!LastIncExpr->isZero()) {
2526 ChainUsersVec[ChainIdx].FarUsers.insert(NearUsers.begin(),
2531 // All other uses of IVOperand become near uses of the chain.
2532 // We currently ignore intermediate values within SCEV expressions, assuming
2533 // they will eventually be used be the current chain, or can be computed
2534 // from one of the chain increments. To be more precise we could
2535 // transitively follow its user and only add leaf IV users to the set.
2536 for (Value::use_iterator UseIter = IVOper->use_begin(),
2537 UseEnd = IVOper->use_end(); UseIter != UseEnd; ++UseIter) {
2538 Instruction *OtherUse = dyn_cast<Instruction>(*UseIter);
2539 if (!OtherUse || OtherUse == UserInst)
2541 if (SE.isSCEVable(OtherUse->getType())
2542 && !isa<SCEVUnknown>(SE.getSCEV(OtherUse))
2543 && IU.isIVUserOrOperand(OtherUse)) {
2546 NearUsers.insert(OtherUse);
2549 // Since this user is part of the chain, it's no longer considered a use
2551 ChainUsersVec[ChainIdx].FarUsers.erase(UserInst);
2554 /// CollectChains - Populate the vector of Chains.
2556 /// This decreases ILP at the architecture level. Targets with ample registers,
2557 /// multiple memory ports, and no register renaming probably don't want
2558 /// this. However, such targets should probably disable LSR altogether.
2560 /// The job of LSR is to make a reasonable choice of induction variables across
2561 /// the loop. Subsequent passes can easily "unchain" computation exposing more
2562 /// ILP *within the loop* if the target wants it.
2564 /// Finding the best IV chain is potentially a scheduling problem. Since LSR
2565 /// will not reorder memory operations, it will recognize this as a chain, but
2566 /// will generate redundant IV increments. Ideally this would be corrected later
2567 /// by a smart scheduler:
2573 /// TODO: Walk the entire domtree within this loop, not just the path to the
2574 /// loop latch. This will discover chains on side paths, but requires
2575 /// maintaining multiple copies of the Chains state.
2576 void LSRInstance::CollectChains() {
2577 DEBUG(dbgs() << "Collecting IV Chains.\n");
2578 SmallVector<ChainUsers, 8> ChainUsersVec;
2580 SmallVector<BasicBlock *,8> LatchPath;
2581 BasicBlock *LoopHeader = L->getHeader();
2582 for (DomTreeNode *Rung = DT.getNode(L->getLoopLatch());
2583 Rung->getBlock() != LoopHeader; Rung = Rung->getIDom()) {
2584 LatchPath.push_back(Rung->getBlock());
2586 LatchPath.push_back(LoopHeader);
2588 // Walk the instruction stream from the loop header to the loop latch.
2589 for (SmallVectorImpl<BasicBlock *>::reverse_iterator
2590 BBIter = LatchPath.rbegin(), BBEnd = LatchPath.rend();
2591 BBIter != BBEnd; ++BBIter) {
2592 for (BasicBlock::iterator I = (*BBIter)->begin(), E = (*BBIter)->end();
2594 // Skip instructions that weren't seen by IVUsers analysis.
2595 if (isa<PHINode>(I) || !IU.isIVUserOrOperand(I))
2598 // Ignore users that are part of a SCEV expression. This way we only
2599 // consider leaf IV Users. This effectively rediscovers a portion of
2600 // IVUsers analysis but in program order this time.
2601 if (SE.isSCEVable(I->getType()) && !isa<SCEVUnknown>(SE.getSCEV(I)))
2604 // Remove this instruction from any NearUsers set it may be in.
2605 for (unsigned ChainIdx = 0, NChains = IVChainVec.size();
2606 ChainIdx < NChains; ++ChainIdx) {
2607 ChainUsersVec[ChainIdx].NearUsers.erase(I);
2609 // Search for operands that can be chained.
2610 SmallPtrSet<Instruction*, 4> UniqueOperands;
2611 User::op_iterator IVOpEnd = I->op_end();
2612 User::op_iterator IVOpIter = findIVOperand(I->op_begin(), IVOpEnd, L, SE);
2613 while (IVOpIter != IVOpEnd) {
2614 Instruction *IVOpInst = cast<Instruction>(*IVOpIter);
2615 if (UniqueOperands.insert(IVOpInst))
2616 ChainInstruction(I, IVOpInst, ChainUsersVec);
2617 IVOpIter = findIVOperand(llvm::next(IVOpIter), IVOpEnd, L, SE);
2619 } // Continue walking down the instructions.
2620 } // Continue walking down the domtree.
2621 // Visit phi backedges to determine if the chain can generate the IV postinc.
2622 for (BasicBlock::iterator I = L->getHeader()->begin();
2623 PHINode *PN = dyn_cast<PHINode>(I); ++I) {
2624 if (!SE.isSCEVable(PN->getType()))
2628 dyn_cast<Instruction>(PN->getIncomingValueForBlock(L->getLoopLatch()));
2630 ChainInstruction(PN, IncV, ChainUsersVec);
2632 // Remove any unprofitable chains.
2633 unsigned ChainIdx = 0;
2634 for (unsigned UsersIdx = 0, NChains = IVChainVec.size();
2635 UsersIdx < NChains; ++UsersIdx) {
2636 if (!isProfitableChain(IVChainVec[UsersIdx],
2637 ChainUsersVec[UsersIdx].FarUsers, SE, TLI))
2639 // Preserve the chain at UsesIdx.
2640 if (ChainIdx != UsersIdx)
2641 IVChainVec[ChainIdx] = IVChainVec[UsersIdx];
2642 FinalizeChain(IVChainVec[ChainIdx]);
2645 IVChainVec.resize(ChainIdx);
2648 void LSRInstance::FinalizeChain(IVChain &Chain) {
2649 assert(!Chain.Incs.empty() && "empty IV chains are not allowed");
2650 DEBUG(dbgs() << "Final Chain: " << *Chain.Incs[0].UserInst << "\n");
2652 for (IVChain::const_iterator I = Chain.begin(), E = Chain.end();
2654 DEBUG(dbgs() << " Inc: " << *I->UserInst << "\n");
2655 User::op_iterator UseI =
2656 std::find(I->UserInst->op_begin(), I->UserInst->op_end(), I->IVOperand);
2657 assert(UseI != I->UserInst->op_end() && "cannot find IV operand");
2658 IVIncSet.insert(UseI);
2662 /// Return true if the IVInc can be folded into an addressing mode.
2663 static bool canFoldIVIncExpr(const SCEV *IncExpr, Instruction *UserInst,
2664 Value *Operand, const TargetLowering *TLI) {
2665 const SCEVConstant *IncConst = dyn_cast<SCEVConstant>(IncExpr);
2666 if (!IncConst || !isAddressUse(UserInst, Operand))
2669 if (IncConst->getValue()->getValue().getMinSignedBits() > 64)
2672 int64_t IncOffset = IncConst->getValue()->getSExtValue();
2673 if (!isAlwaysFoldable(IncOffset, /*BaseGV=*/0, /*HaseBaseReg=*/false,
2674 LSRUse::Address, getAccessType(UserInst), TLI))
2680 /// GenerateIVChains - Generate an add or subtract for each IVInc in a chain to
2681 /// materialize the IV user's operand from the previous IV user's operand.
2682 void LSRInstance::GenerateIVChain(const IVChain &Chain, SCEVExpander &Rewriter,
2683 SmallVectorImpl<WeakVH> &DeadInsts) {
2684 // Find the new IVOperand for the head of the chain. It may have been replaced
2686 const IVInc &Head = Chain.Incs[0];
2687 User::op_iterator IVOpEnd = Head.UserInst->op_end();
2688 User::op_iterator IVOpIter = findIVOperand(Head.UserInst->op_begin(),
2691 while (IVOpIter != IVOpEnd) {
2692 IVSrc = getWideOperand(*IVOpIter);
2694 // If this operand computes the expression that the chain needs, we may use
2695 // it. (Check this after setting IVSrc which is used below.)
2697 // Note that if Head.IncExpr is wider than IVSrc, then this phi is too
2698 // narrow for the chain, so we can no longer use it. We do allow using a
2699 // wider phi, assuming the LSR checked for free truncation. In that case we
2700 // should already have a truncate on this operand such that
2701 // getSCEV(IVSrc) == IncExpr.
2702 if (SE.getSCEV(*IVOpIter) == Head.IncExpr
2703 || SE.getSCEV(IVSrc) == Head.IncExpr) {
2706 IVOpIter = findIVOperand(llvm::next(IVOpIter), IVOpEnd, L, SE);
2708 if (IVOpIter == IVOpEnd) {
2709 // Gracefully give up on this chain.
2710 DEBUG(dbgs() << "Concealed chain head: " << *Head.UserInst << "\n");
2714 DEBUG(dbgs() << "Generate chain at: " << *IVSrc << "\n");
2715 Type *IVTy = IVSrc->getType();
2716 Type *IntTy = SE.getEffectiveSCEVType(IVTy);
2717 const SCEV *LeftOverExpr = 0;
2718 for (IVChain::const_iterator IncI = Chain.begin(),
2719 IncE = Chain.end(); IncI != IncE; ++IncI) {
2721 Instruction *InsertPt = IncI->UserInst;
2722 if (isa<PHINode>(InsertPt))
2723 InsertPt = L->getLoopLatch()->getTerminator();
2725 // IVOper will replace the current IV User's operand. IVSrc is the IV
2726 // value currently held in a register.
2727 Value *IVOper = IVSrc;
2728 if (!IncI->IncExpr->isZero()) {
2729 // IncExpr was the result of subtraction of two narrow values, so must
2731 const SCEV *IncExpr = SE.getNoopOrSignExtend(IncI->IncExpr, IntTy);
2732 LeftOverExpr = LeftOverExpr ?
2733 SE.getAddExpr(LeftOverExpr, IncExpr) : IncExpr;
2735 if (LeftOverExpr && !LeftOverExpr->isZero()) {
2736 // Expand the IV increment.
2737 Rewriter.clearPostInc();
2738 Value *IncV = Rewriter.expandCodeFor(LeftOverExpr, IntTy, InsertPt);
2739 const SCEV *IVOperExpr = SE.getAddExpr(SE.getUnknown(IVSrc),
2740 SE.getUnknown(IncV));
2741 IVOper = Rewriter.expandCodeFor(IVOperExpr, IVTy, InsertPt);
2743 // If an IV increment can't be folded, use it as the next IV value.
2744 if (!canFoldIVIncExpr(LeftOverExpr, IncI->UserInst, IncI->IVOperand,
2746 assert(IVTy == IVOper->getType() && "inconsistent IV increment type");
2751 Type *OperTy = IncI->IVOperand->getType();
2752 if (IVTy != OperTy) {
2753 assert(SE.getTypeSizeInBits(IVTy) >= SE.getTypeSizeInBits(OperTy) &&
2754 "cannot extend a chained IV");
2755 IRBuilder<> Builder(InsertPt);
2756 IVOper = Builder.CreateTruncOrBitCast(IVOper, OperTy, "lsr.chain");
2758 IncI->UserInst->replaceUsesOfWith(IncI->IVOperand, IVOper);
2759 DeadInsts.push_back(IncI->IVOperand);
2761 // If LSR created a new, wider phi, we may also replace its postinc. We only
2762 // do this if we also found a wide value for the head of the chain.
2763 if (isa<PHINode>(Chain.tailUserInst())) {
2764 for (BasicBlock::iterator I = L->getHeader()->begin();
2765 PHINode *Phi = dyn_cast<PHINode>(I); ++I) {
2766 if (!isCompatibleIVType(Phi, IVSrc))
2768 Instruction *PostIncV = dyn_cast<Instruction>(
2769 Phi->getIncomingValueForBlock(L->getLoopLatch()));
2770 if (!PostIncV || (SE.getSCEV(PostIncV) != SE.getSCEV(IVSrc)))
2772 Value *IVOper = IVSrc;
2773 Type *PostIncTy = PostIncV->getType();
2774 if (IVTy != PostIncTy) {
2775 assert(PostIncTy->isPointerTy() && "mixing int/ptr IV types");
2776 IRBuilder<> Builder(L->getLoopLatch()->getTerminator());
2777 Builder.SetCurrentDebugLocation(PostIncV->getDebugLoc());
2778 IVOper = Builder.CreatePointerCast(IVSrc, PostIncTy, "lsr.chain");
2780 Phi->replaceUsesOfWith(PostIncV, IVOper);
2781 DeadInsts.push_back(PostIncV);
2786 void LSRInstance::CollectFixupsAndInitialFormulae() {
2787 for (IVUsers::const_iterator UI = IU.begin(), E = IU.end(); UI != E; ++UI) {
2788 Instruction *UserInst = UI->getUser();
2789 // Skip IV users that are part of profitable IV Chains.
2790 User::op_iterator UseI = std::find(UserInst->op_begin(), UserInst->op_end(),
2791 UI->getOperandValToReplace());
2792 assert(UseI != UserInst->op_end() && "cannot find IV operand");
2793 if (IVIncSet.count(UseI))
2797 LSRFixup &LF = getNewFixup();
2798 LF.UserInst = UserInst;
2799 LF.OperandValToReplace = UI->getOperandValToReplace();
2800 LF.PostIncLoops = UI->getPostIncLoops();
2802 LSRUse::KindType Kind = LSRUse::Basic;
2804 if (isAddressUse(LF.UserInst, LF.OperandValToReplace)) {
2805 Kind = LSRUse::Address;
2806 AccessTy = getAccessType(LF.UserInst);
2809 const SCEV *S = IU.getExpr(*UI);
2811 // Equality (== and !=) ICmps are special. We can rewrite (i == N) as
2812 // (N - i == 0), and this allows (N - i) to be the expression that we work
2813 // with rather than just N or i, so we can consider the register
2814 // requirements for both N and i at the same time. Limiting this code to
2815 // equality icmps is not a problem because all interesting loops use
2816 // equality icmps, thanks to IndVarSimplify.
2817 if (ICmpInst *CI = dyn_cast<ICmpInst>(LF.UserInst))
2818 if (CI->isEquality()) {
2819 // Swap the operands if needed to put the OperandValToReplace on the
2820 // left, for consistency.
2821 Value *NV = CI->getOperand(1);
2822 if (NV == LF.OperandValToReplace) {
2823 CI->setOperand(1, CI->getOperand(0));
2824 CI->setOperand(0, NV);
2825 NV = CI->getOperand(1);
2829 // x == y --> x - y == 0
2830 const SCEV *N = SE.getSCEV(NV);
2831 if (SE.isLoopInvariant(N, L)) {
2832 // S is normalized, so normalize N before folding it into S
2833 // to keep the result normalized.
2834 N = TransformForPostIncUse(Normalize, N, CI, 0,
2835 LF.PostIncLoops, SE, DT);
2836 Kind = LSRUse::ICmpZero;
2837 S = SE.getMinusSCEV(N, S);
2840 // -1 and the negations of all interesting strides (except the negation
2841 // of -1) are now also interesting.
2842 for (size_t i = 0, e = Factors.size(); i != e; ++i)
2843 if (Factors[i] != -1)
2844 Factors.insert(-(uint64_t)Factors[i]);
2848 // Set up the initial formula for this use.
2849 std::pair<size_t, int64_t> P = getUse(S, Kind, AccessTy);
2851 LF.Offset = P.second;
2852 LSRUse &LU = Uses[LF.LUIdx];
2853 LU.AllFixupsOutsideLoop &= LF.isUseFullyOutsideLoop(L);
2854 if (!LU.WidestFixupType ||
2855 SE.getTypeSizeInBits(LU.WidestFixupType) <
2856 SE.getTypeSizeInBits(LF.OperandValToReplace->getType()))
2857 LU.WidestFixupType = LF.OperandValToReplace->getType();
2859 // If this is the first use of this LSRUse, give it a formula.
2860 if (LU.Formulae.empty()) {
2861 InsertInitialFormula(S, LU, LF.LUIdx);
2862 CountRegisters(LU.Formulae.back(), LF.LUIdx);
2866 DEBUG(print_fixups(dbgs()));
2869 /// InsertInitialFormula - Insert a formula for the given expression into
2870 /// the given use, separating out loop-variant portions from loop-invariant
2871 /// and loop-computable portions.
2873 LSRInstance::InsertInitialFormula(const SCEV *S, LSRUse &LU, size_t LUIdx) {
2875 F.InitialMatch(S, L, SE);
2876 bool Inserted = InsertFormula(LU, LUIdx, F);
2877 assert(Inserted && "Initial formula already exists!"); (void)Inserted;
2880 /// InsertSupplementalFormula - Insert a simple single-register formula for
2881 /// the given expression into the given use.
2883 LSRInstance::InsertSupplementalFormula(const SCEV *S,
2884 LSRUse &LU, size_t LUIdx) {
2886 F.BaseRegs.push_back(S);
2887 F.AM.HasBaseReg = true;
2888 bool Inserted = InsertFormula(LU, LUIdx, F);
2889 assert(Inserted && "Supplemental formula already exists!"); (void)Inserted;
2892 /// CountRegisters - Note which registers are used by the given formula,
2893 /// updating RegUses.
2894 void LSRInstance::CountRegisters(const Formula &F, size_t LUIdx) {
2896 RegUses.CountRegister(F.ScaledReg, LUIdx);
2897 for (SmallVectorImpl<const SCEV *>::const_iterator I = F.BaseRegs.begin(),
2898 E = F.BaseRegs.end(); I != E; ++I)
2899 RegUses.CountRegister(*I, LUIdx);
2902 /// InsertFormula - If the given formula has not yet been inserted, add it to
2903 /// the list, and return true. Return false otherwise.
2904 bool LSRInstance::InsertFormula(LSRUse &LU, unsigned LUIdx, const Formula &F) {
2905 if (!LU.InsertFormula(F))
2908 CountRegisters(F, LUIdx);
2912 /// CollectLoopInvariantFixupsAndFormulae - Check for other uses of
2913 /// loop-invariant values which we're tracking. These other uses will pin these
2914 /// values in registers, making them less profitable for elimination.
2915 /// TODO: This currently misses non-constant addrec step registers.
2916 /// TODO: Should this give more weight to users inside the loop?
2918 LSRInstance::CollectLoopInvariantFixupsAndFormulae() {
2919 SmallVector<const SCEV *, 8> Worklist(RegUses.begin(), RegUses.end());
2920 SmallPtrSet<const SCEV *, 8> Inserted;
2922 while (!Worklist.empty()) {
2923 const SCEV *S = Worklist.pop_back_val();
2925 if (const SCEVNAryExpr *N = dyn_cast<SCEVNAryExpr>(S))
2926 Worklist.append(N->op_begin(), N->op_end());
2927 else if (const SCEVCastExpr *C = dyn_cast<SCEVCastExpr>(S))
2928 Worklist.push_back(C->getOperand());
2929 else if (const SCEVUDivExpr *D = dyn_cast<SCEVUDivExpr>(S)) {
2930 Worklist.push_back(D->getLHS());
2931 Worklist.push_back(D->getRHS());
2932 } else if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(S)) {
2933 if (!Inserted.insert(U)) continue;
2934 const Value *V = U->getValue();
2935 if (const Instruction *Inst = dyn_cast<Instruction>(V)) {
2936 // Look for instructions defined outside the loop.
2937 if (L->contains(Inst)) continue;
2938 } else if (isa<UndefValue>(V))
2939 // Undef doesn't have a live range, so it doesn't matter.
2941 for (Value::const_use_iterator UI = V->use_begin(), UE = V->use_end();
2943 const Instruction *UserInst = dyn_cast<Instruction>(*UI);
2944 // Ignore non-instructions.
2947 // Ignore instructions in other functions (as can happen with
2949 if (UserInst->getParent()->getParent() != L->getHeader()->getParent())
2951 // Ignore instructions not dominated by the loop.
2952 const BasicBlock *UseBB = !isa<PHINode>(UserInst) ?
2953 UserInst->getParent() :
2954 cast<PHINode>(UserInst)->getIncomingBlock(
2955 PHINode::getIncomingValueNumForOperand(UI.getOperandNo()));
2956 if (!DT.dominates(L->getHeader(), UseBB))
2958 // Ignore uses which are part of other SCEV expressions, to avoid
2959 // analyzing them multiple times.
2960 if (SE.isSCEVable(UserInst->getType())) {
2961 const SCEV *UserS = SE.getSCEV(const_cast<Instruction *>(UserInst));
2962 // If the user is a no-op, look through to its uses.
2963 if (!isa<SCEVUnknown>(UserS))
2967 SE.getUnknown(const_cast<Instruction *>(UserInst)));
2971 // Ignore icmp instructions which are already being analyzed.
2972 if (const ICmpInst *ICI = dyn_cast<ICmpInst>(UserInst)) {
2973 unsigned OtherIdx = !UI.getOperandNo();
2974 Value *OtherOp = const_cast<Value *>(ICI->getOperand(OtherIdx));
2975 if (SE.hasComputableLoopEvolution(SE.getSCEV(OtherOp), L))
2979 LSRFixup &LF = getNewFixup();
2980 LF.UserInst = const_cast<Instruction *>(UserInst);
2981 LF.OperandValToReplace = UI.getUse();
2982 std::pair<size_t, int64_t> P = getUse(S, LSRUse::Basic, 0);
2984 LF.Offset = P.second;
2985 LSRUse &LU = Uses[LF.LUIdx];
2986 LU.AllFixupsOutsideLoop &= LF.isUseFullyOutsideLoop(L);
2987 if (!LU.WidestFixupType ||
2988 SE.getTypeSizeInBits(LU.WidestFixupType) <
2989 SE.getTypeSizeInBits(LF.OperandValToReplace->getType()))
2990 LU.WidestFixupType = LF.OperandValToReplace->getType();
2991 InsertSupplementalFormula(U, LU, LF.LUIdx);
2992 CountRegisters(LU.Formulae.back(), Uses.size() - 1);
2999 /// CollectSubexprs - Split S into subexpressions which can be pulled out into
3000 /// separate registers. If C is non-null, multiply each subexpression by C.
3001 static void CollectSubexprs(const SCEV *S, const SCEVConstant *C,
3002 SmallVectorImpl<const SCEV *> &Ops,
3004 ScalarEvolution &SE) {
3005 if (const SCEVAddExpr *Add = dyn_cast<SCEVAddExpr>(S)) {
3006 // Break out add operands.
3007 for (SCEVAddExpr::op_iterator I = Add->op_begin(), E = Add->op_end();
3009 CollectSubexprs(*I, C, Ops, L, SE);
3011 } else if (const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(S)) {
3012 // Split a non-zero base out of an addrec.
3013 if (!AR->getStart()->isZero()) {
3014 CollectSubexprs(SE.getAddRecExpr(SE.getConstant(AR->getType(), 0),
3015 AR->getStepRecurrence(SE),
3017 //FIXME: AR->getNoWrapFlags(SCEV::FlagNW)
3020 CollectSubexprs(AR->getStart(), C, Ops, L, SE);
3023 } else if (const SCEVMulExpr *Mul = dyn_cast<SCEVMulExpr>(S)) {
3024 // Break (C * (a + b + c)) into C*a + C*b + C*c.
3025 if (Mul->getNumOperands() == 2)
3026 if (const SCEVConstant *Op0 =
3027 dyn_cast<SCEVConstant>(Mul->getOperand(0))) {
3028 CollectSubexprs(Mul->getOperand(1),
3029 C ? cast<SCEVConstant>(SE.getMulExpr(C, Op0)) : Op0,
3035 // Otherwise use the value itself, optionally with a scale applied.
3036 Ops.push_back(C ? SE.getMulExpr(C, S) : S);
3039 /// GenerateReassociations - Split out subexpressions from adds and the bases of
3041 void LSRInstance::GenerateReassociations(LSRUse &LU, unsigned LUIdx,
3044 // Arbitrarily cap recursion to protect compile time.
3045 if (Depth >= 3) return;
3047 for (size_t i = 0, e = Base.BaseRegs.size(); i != e; ++i) {
3048 const SCEV *BaseReg = Base.BaseRegs[i];
3050 SmallVector<const SCEV *, 8> AddOps;
3051 CollectSubexprs(BaseReg, 0, AddOps, L, SE);
3053 if (AddOps.size() == 1) continue;
3055 for (SmallVectorImpl<const SCEV *>::const_iterator J = AddOps.begin(),
3056 JE = AddOps.end(); J != JE; ++J) {
3058 // Loop-variant "unknown" values are uninteresting; we won't be able to
3059 // do anything meaningful with them.
3060 if (isa<SCEVUnknown>(*J) && !SE.isLoopInvariant(*J, L))
3063 // Don't pull a constant into a register if the constant could be folded
3064 // into an immediate field.
3065 if (isAlwaysFoldable(*J, LU.MinOffset, LU.MaxOffset,
3066 Base.getNumRegs() > 1,
3067 LU.Kind, LU.AccessTy, TLI, SE))
3070 // Collect all operands except *J.
3071 SmallVector<const SCEV *, 8> InnerAddOps
3072 (((const SmallVector<const SCEV *, 8> &)AddOps).begin(), J);
3074 (llvm::next(J), ((const SmallVector<const SCEV *, 8> &)AddOps).end());
3076 // Don't leave just a constant behind in a register if the constant could
3077 // be folded into an immediate field.
3078 if (InnerAddOps.size() == 1 &&
3079 isAlwaysFoldable(InnerAddOps[0], LU.MinOffset, LU.MaxOffset,
3080 Base.getNumRegs() > 1,
3081 LU.Kind, LU.AccessTy, TLI, SE))
3084 const SCEV *InnerSum = SE.getAddExpr(InnerAddOps);
3085 if (InnerSum->isZero())
3089 // Add the remaining pieces of the add back into the new formula.
3090 const SCEVConstant *InnerSumSC = dyn_cast<SCEVConstant>(InnerSum);
3091 if (TLI && InnerSumSC &&
3092 SE.getTypeSizeInBits(InnerSumSC->getType()) <= 64 &&
3093 TLI->isLegalAddImmediate((uint64_t)F.UnfoldedOffset +
3094 InnerSumSC->getValue()->getZExtValue())) {
3095 F.UnfoldedOffset = (uint64_t)F.UnfoldedOffset +
3096 InnerSumSC->getValue()->getZExtValue();
3097 F.BaseRegs.erase(F.BaseRegs.begin() + i);
3099 F.BaseRegs[i] = InnerSum;
3101 // Add J as its own register, or an unfolded immediate.
3102 const SCEVConstant *SC = dyn_cast<SCEVConstant>(*J);
3103 if (TLI && SC && SE.getTypeSizeInBits(SC->getType()) <= 64 &&
3104 TLI->isLegalAddImmediate((uint64_t)F.UnfoldedOffset +
3105 SC->getValue()->getZExtValue()))
3106 F.UnfoldedOffset = (uint64_t)F.UnfoldedOffset +
3107 SC->getValue()->getZExtValue();
3109 F.BaseRegs.push_back(*J);
3111 if (InsertFormula(LU, LUIdx, F))
3112 // If that formula hadn't been seen before, recurse to find more like
3114 GenerateReassociations(LU, LUIdx, LU.Formulae.back(), Depth+1);
3119 /// GenerateCombinations - Generate a formula consisting of all of the
3120 /// loop-dominating registers added into a single register.
3121 void LSRInstance::GenerateCombinations(LSRUse &LU, unsigned LUIdx,
3123 // This method is only interesting on a plurality of registers.
3124 if (Base.BaseRegs.size() <= 1) return;
3128 SmallVector<const SCEV *, 4> Ops;
3129 for (SmallVectorImpl<const SCEV *>::const_iterator
3130 I = Base.BaseRegs.begin(), E = Base.BaseRegs.end(); I != E; ++I) {
3131 const SCEV *BaseReg = *I;
3132 if (SE.properlyDominates(BaseReg, L->getHeader()) &&
3133 !SE.hasComputableLoopEvolution(BaseReg, L))
3134 Ops.push_back(BaseReg);
3136 F.BaseRegs.push_back(BaseReg);
3138 if (Ops.size() > 1) {
3139 const SCEV *Sum = SE.getAddExpr(Ops);
3140 // TODO: If Sum is zero, it probably means ScalarEvolution missed an
3141 // opportunity to fold something. For now, just ignore such cases
3142 // rather than proceed with zero in a register.
3143 if (!Sum->isZero()) {
3144 F.BaseRegs.push_back(Sum);
3145 (void)InsertFormula(LU, LUIdx, F);
3150 /// GenerateSymbolicOffsets - Generate reuse formulae using symbolic offsets.
3151 void LSRInstance::GenerateSymbolicOffsets(LSRUse &LU, unsigned LUIdx,
3153 // We can't add a symbolic offset if the address already contains one.
3154 if (Base.AM.BaseGV) return;
3156 for (size_t i = 0, e = Base.BaseRegs.size(); i != e; ++i) {
3157 const SCEV *G = Base.BaseRegs[i];
3158 GlobalValue *GV = ExtractSymbol(G, SE);
3159 if (G->isZero() || !GV)
3163 if (!isLegalUse(F.AM, LU.MinOffset, LU.MaxOffset,
3164 LU.Kind, LU.AccessTy, TLI))
3167 (void)InsertFormula(LU, LUIdx, F);
3171 /// GenerateConstantOffsets - Generate reuse formulae using symbolic offsets.
3172 void LSRInstance::GenerateConstantOffsets(LSRUse &LU, unsigned LUIdx,
3174 // TODO: For now, just add the min and max offset, because it usually isn't
3175 // worthwhile looking at everything inbetween.
3176 SmallVector<int64_t, 2> Worklist;
3177 Worklist.push_back(LU.MinOffset);
3178 if (LU.MaxOffset != LU.MinOffset)
3179 Worklist.push_back(LU.MaxOffset);
3181 for (size_t i = 0, e = Base.BaseRegs.size(); i != e; ++i) {
3182 const SCEV *G = Base.BaseRegs[i];
3184 for (SmallVectorImpl<int64_t>::const_iterator I = Worklist.begin(),
3185 E = Worklist.end(); I != E; ++I) {
3187 F.AM.BaseOffs = (uint64_t)Base.AM.BaseOffs - *I;
3188 if (isLegalUse(F.AM, LU.MinOffset - *I, LU.MaxOffset - *I,
3189 LU.Kind, LU.AccessTy, TLI)) {
3190 // Add the offset to the base register.
3191 const SCEV *NewG = SE.getAddExpr(SE.getConstant(G->getType(), *I), G);
3192 // If it cancelled out, drop the base register, otherwise update it.
3193 if (NewG->isZero()) {
3194 std::swap(F.BaseRegs[i], F.BaseRegs.back());
3195 F.BaseRegs.pop_back();
3197 F.BaseRegs[i] = NewG;
3199 (void)InsertFormula(LU, LUIdx, F);
3203 int64_t Imm = ExtractImmediate(G, SE);
3204 if (G->isZero() || Imm == 0)
3207 F.AM.BaseOffs = (uint64_t)F.AM.BaseOffs + Imm;
3208 if (!isLegalUse(F.AM, LU.MinOffset, LU.MaxOffset,
3209 LU.Kind, LU.AccessTy, TLI))
3212 (void)InsertFormula(LU, LUIdx, F);
3216 /// GenerateICmpZeroScales - For ICmpZero, check to see if we can scale up
3217 /// the comparison. For example, x == y -> x*c == y*c.
3218 void LSRInstance::GenerateICmpZeroScales(LSRUse &LU, unsigned LUIdx,
3220 if (LU.Kind != LSRUse::ICmpZero) return;
3222 // Determine the integer type for the base formula.
3223 Type *IntTy = Base.getType();
3225 if (SE.getTypeSizeInBits(IntTy) > 64) return;
3227 // Don't do this if there is more than one offset.
3228 if (LU.MinOffset != LU.MaxOffset) return;
3230 assert(!Base.AM.BaseGV && "ICmpZero use is not legal!");
3232 // Check each interesting stride.
3233 for (SmallSetVector<int64_t, 8>::const_iterator
3234 I = Factors.begin(), E = Factors.end(); I != E; ++I) {
3235 int64_t Factor = *I;
3237 // Check that the multiplication doesn't overflow.
3238 if (Base.AM.BaseOffs == INT64_MIN && Factor == -1)
3240 int64_t NewBaseOffs = (uint64_t)Base.AM.BaseOffs * Factor;
3241 if (NewBaseOffs / Factor != Base.AM.BaseOffs)
3244 // Check that multiplying with the use offset doesn't overflow.
3245 int64_t Offset = LU.MinOffset;
3246 if (Offset == INT64_MIN && Factor == -1)
3248 Offset = (uint64_t)Offset * Factor;
3249 if (Offset / Factor != LU.MinOffset)
3253 F.AM.BaseOffs = NewBaseOffs;
3255 // Check that this scale is legal.
3256 if (!isLegalUse(F.AM, Offset, Offset, LU.Kind, LU.AccessTy, TLI))
3259 // Compensate for the use having MinOffset built into it.
3260 F.AM.BaseOffs = (uint64_t)F.AM.BaseOffs + Offset - LU.MinOffset;
3262 const SCEV *FactorS = SE.getConstant(IntTy, Factor);
3264 // Check that multiplying with each base register doesn't overflow.
3265 for (size_t i = 0, e = F.BaseRegs.size(); i != e; ++i) {
3266 F.BaseRegs[i] = SE.getMulExpr(F.BaseRegs[i], FactorS);
3267 if (getExactSDiv(F.BaseRegs[i], FactorS, SE) != Base.BaseRegs[i])
3271 // Check that multiplying with the scaled register doesn't overflow.
3273 F.ScaledReg = SE.getMulExpr(F.ScaledReg, FactorS);
3274 if (getExactSDiv(F.ScaledReg, FactorS, SE) != Base.ScaledReg)
3278 // Check that multiplying with the unfolded offset doesn't overflow.
3279 if (F.UnfoldedOffset != 0) {
3280 if (F.UnfoldedOffset == INT64_MIN && Factor == -1)
3282 F.UnfoldedOffset = (uint64_t)F.UnfoldedOffset * Factor;
3283 if (F.UnfoldedOffset / Factor != Base.UnfoldedOffset)
3287 // If we make it here and it's legal, add it.
3288 (void)InsertFormula(LU, LUIdx, F);
3293 /// GenerateScales - Generate stride factor reuse formulae by making use of
3294 /// scaled-offset address modes, for example.
3295 void LSRInstance::GenerateScales(LSRUse &LU, unsigned LUIdx, Formula Base) {
3296 // Determine the integer type for the base formula.
3297 Type *IntTy = Base.getType();
3300 // If this Formula already has a scaled register, we can't add another one.
3301 if (Base.AM.Scale != 0) return;
3303 // Check each interesting stride.
3304 for (SmallSetVector<int64_t, 8>::const_iterator
3305 I = Factors.begin(), E = Factors.end(); I != E; ++I) {
3306 int64_t Factor = *I;
3308 Base.AM.Scale = Factor;
3309 Base.AM.HasBaseReg = Base.BaseRegs.size() > 1;
3310 // Check whether this scale is going to be legal.
3311 if (!isLegalUse(Base.AM, LU.MinOffset, LU.MaxOffset,
3312 LU.Kind, LU.AccessTy, TLI)) {
3313 // As a special-case, handle special out-of-loop Basic users specially.
3314 // TODO: Reconsider this special case.
3315 if (LU.Kind == LSRUse::Basic &&
3316 isLegalUse(Base.AM, LU.MinOffset, LU.MaxOffset,
3317 LSRUse::Special, LU.AccessTy, TLI) &&
3318 LU.AllFixupsOutsideLoop)
3319 LU.Kind = LSRUse::Special;
3323 // For an ICmpZero, negating a solitary base register won't lead to
3325 if (LU.Kind == LSRUse::ICmpZero &&
3326 !Base.AM.HasBaseReg && Base.AM.BaseOffs == 0 && !Base.AM.BaseGV)
3328 // For each addrec base reg, apply the scale, if possible.
3329 for (size_t i = 0, e = Base.BaseRegs.size(); i != e; ++i)
3330 if (const SCEVAddRecExpr *AR =
3331 dyn_cast<SCEVAddRecExpr>(Base.BaseRegs[i])) {
3332 const SCEV *FactorS = SE.getConstant(IntTy, Factor);
3333 if (FactorS->isZero())
3335 // Divide out the factor, ignoring high bits, since we'll be
3336 // scaling the value back up in the end.
3337 if (const SCEV *Quotient = getExactSDiv(AR, FactorS, SE, true)) {
3338 // TODO: This could be optimized to avoid all the copying.
3340 F.ScaledReg = Quotient;
3341 F.DeleteBaseReg(F.BaseRegs[i]);
3342 (void)InsertFormula(LU, LUIdx, F);
3348 /// GenerateTruncates - Generate reuse formulae from different IV types.
3349 void LSRInstance::GenerateTruncates(LSRUse &LU, unsigned LUIdx, Formula Base) {
3350 // This requires TargetLowering to tell us which truncates are free.
3353 // Don't bother truncating symbolic values.
3354 if (Base.AM.BaseGV) return;
3356 // Determine the integer type for the base formula.
3357 Type *DstTy = Base.getType();
3359 DstTy = SE.getEffectiveSCEVType(DstTy);
3361 for (SmallSetVector<Type *, 4>::const_iterator
3362 I = Types.begin(), E = Types.end(); I != E; ++I) {
3364 if (SrcTy != DstTy && TLI->isTruncateFree(SrcTy, DstTy)) {
3367 if (F.ScaledReg) F.ScaledReg = SE.getAnyExtendExpr(F.ScaledReg, *I);
3368 for (SmallVectorImpl<const SCEV *>::iterator J = F.BaseRegs.begin(),
3369 JE = F.BaseRegs.end(); J != JE; ++J)
3370 *J = SE.getAnyExtendExpr(*J, SrcTy);
3372 // TODO: This assumes we've done basic processing on all uses and
3373 // have an idea what the register usage is.
3374 if (!F.hasRegsUsedByUsesOtherThan(LUIdx, RegUses))
3377 (void)InsertFormula(LU, LUIdx, F);
3384 /// WorkItem - Helper class for GenerateCrossUseConstantOffsets. It's used to
3385 /// defer modifications so that the search phase doesn't have to worry about
3386 /// the data structures moving underneath it.
3390 const SCEV *OrigReg;
3392 WorkItem(size_t LI, int64_t I, const SCEV *R)
3393 : LUIdx(LI), Imm(I), OrigReg(R) {}
3395 void print(raw_ostream &OS) const;
3401 void WorkItem::print(raw_ostream &OS) const {
3402 OS << "in formulae referencing " << *OrigReg << " in use " << LUIdx
3403 << " , add offset " << Imm;
3406 void WorkItem::dump() const {
3407 print(errs()); errs() << '\n';
3410 /// GenerateCrossUseConstantOffsets - Look for registers which are a constant
3411 /// distance apart and try to form reuse opportunities between them.
3412 void LSRInstance::GenerateCrossUseConstantOffsets() {
3413 // Group the registers by their value without any added constant offset.
3414 typedef std::map<int64_t, const SCEV *> ImmMapTy;
3415 typedef DenseMap<const SCEV *, ImmMapTy> RegMapTy;
3417 DenseMap<const SCEV *, SmallBitVector> UsedByIndicesMap;
3418 SmallVector<const SCEV *, 8> Sequence;
3419 for (RegUseTracker::const_iterator I = RegUses.begin(), E = RegUses.end();
3421 const SCEV *Reg = *I;
3422 int64_t Imm = ExtractImmediate(Reg, SE);
3423 std::pair<RegMapTy::iterator, bool> Pair =
3424 Map.insert(std::make_pair(Reg, ImmMapTy()));
3426 Sequence.push_back(Reg);
3427 Pair.first->second.insert(std::make_pair(Imm, *I));
3428 UsedByIndicesMap[Reg] |= RegUses.getUsedByIndices(*I);
3431 // Now examine each set of registers with the same base value. Build up
3432 // a list of work to do and do the work in a separate step so that we're
3433 // not adding formulae and register counts while we're searching.
3434 SmallVector<WorkItem, 32> WorkItems;
3435 SmallSet<std::pair<size_t, int64_t>, 32> UniqueItems;
3436 for (SmallVectorImpl<const SCEV *>::const_iterator I = Sequence.begin(),
3437 E = Sequence.end(); I != E; ++I) {
3438 const SCEV *Reg = *I;
3439 const ImmMapTy &Imms = Map.find(Reg)->second;
3441 // It's not worthwhile looking for reuse if there's only one offset.
3442 if (Imms.size() == 1)
3445 DEBUG(dbgs() << "Generating cross-use offsets for " << *Reg << ':';
3446 for (ImmMapTy::const_iterator J = Imms.begin(), JE = Imms.end();
3448 dbgs() << ' ' << J->first;
3451 // Examine each offset.
3452 for (ImmMapTy::const_iterator J = Imms.begin(), JE = Imms.end();
3454 const SCEV *OrigReg = J->second;
3456 int64_t JImm = J->first;
3457 const SmallBitVector &UsedByIndices = RegUses.getUsedByIndices(OrigReg);
3459 if (!isa<SCEVConstant>(OrigReg) &&
3460 UsedByIndicesMap[Reg].count() == 1) {
3461 DEBUG(dbgs() << "Skipping cross-use reuse for " << *OrigReg << '\n');
3465 // Conservatively examine offsets between this orig reg a few selected
3467 ImmMapTy::const_iterator OtherImms[] = {
3468 Imms.begin(), prior(Imms.end()),
3469 Imms.lower_bound((Imms.begin()->first + prior(Imms.end())->first) / 2)
3471 for (size_t i = 0, e = array_lengthof(OtherImms); i != e; ++i) {
3472 ImmMapTy::const_iterator M = OtherImms[i];
3473 if (M == J || M == JE) continue;
3475 // Compute the difference between the two.
3476 int64_t Imm = (uint64_t)JImm - M->first;
3477 for (int LUIdx = UsedByIndices.find_first(); LUIdx != -1;
3478 LUIdx = UsedByIndices.find_next(LUIdx))
3479 // Make a memo of this use, offset, and register tuple.
3480 if (UniqueItems.insert(std::make_pair(LUIdx, Imm)))
3481 WorkItems.push_back(WorkItem(LUIdx, Imm, OrigReg));
3488 UsedByIndicesMap.clear();
3489 UniqueItems.clear();
3491 // Now iterate through the worklist and add new formulae.
3492 for (SmallVectorImpl<WorkItem>::const_iterator I = WorkItems.begin(),
3493 E = WorkItems.end(); I != E; ++I) {
3494 const WorkItem &WI = *I;
3495 size_t LUIdx = WI.LUIdx;
3496 LSRUse &LU = Uses[LUIdx];
3497 int64_t Imm = WI.Imm;
3498 const SCEV *OrigReg = WI.OrigReg;
3500 Type *IntTy = SE.getEffectiveSCEVType(OrigReg->getType());
3501 const SCEV *NegImmS = SE.getSCEV(ConstantInt::get(IntTy, -(uint64_t)Imm));
3502 unsigned BitWidth = SE.getTypeSizeInBits(IntTy);
3504 // TODO: Use a more targeted data structure.
3505 for (size_t L = 0, LE = LU.Formulae.size(); L != LE; ++L) {
3506 const Formula &F = LU.Formulae[L];
3507 // Use the immediate in the scaled register.
3508 if (F.ScaledReg == OrigReg) {
3509 int64_t Offs = (uint64_t)F.AM.BaseOffs +
3510 Imm * (uint64_t)F.AM.Scale;
3511 // Don't create 50 + reg(-50).
3512 if (F.referencesReg(SE.getSCEV(
3513 ConstantInt::get(IntTy, -(uint64_t)Offs))))
3516 NewF.AM.BaseOffs = Offs;
3517 if (!isLegalUse(NewF.AM, LU.MinOffset, LU.MaxOffset,
3518 LU.Kind, LU.AccessTy, TLI))
3520 NewF.ScaledReg = SE.getAddExpr(NegImmS, NewF.ScaledReg);
3522 // If the new scale is a constant in a register, and adding the constant
3523 // value to the immediate would produce a value closer to zero than the
3524 // immediate itself, then the formula isn't worthwhile.
3525 if (const SCEVConstant *C = dyn_cast<SCEVConstant>(NewF.ScaledReg))
3526 if (C->getValue()->isNegative() !=
3527 (NewF.AM.BaseOffs < 0) &&
3528 (C->getValue()->getValue().abs() * APInt(BitWidth, F.AM.Scale))
3529 .ule(abs64(NewF.AM.BaseOffs)))
3533 (void)InsertFormula(LU, LUIdx, NewF);
3535 // Use the immediate in a base register.
3536 for (size_t N = 0, NE = F.BaseRegs.size(); N != NE; ++N) {
3537 const SCEV *BaseReg = F.BaseRegs[N];
3538 if (BaseReg != OrigReg)
3541 NewF.AM.BaseOffs = (uint64_t)NewF.AM.BaseOffs + Imm;
3542 if (!isLegalUse(NewF.AM, LU.MinOffset, LU.MaxOffset,
3543 LU.Kind, LU.AccessTy, TLI)) {
3545 !TLI->isLegalAddImmediate((uint64_t)NewF.UnfoldedOffset + Imm))
3548 NewF.UnfoldedOffset = (uint64_t)NewF.UnfoldedOffset + Imm;
3550 NewF.BaseRegs[N] = SE.getAddExpr(NegImmS, BaseReg);
3552 // If the new formula has a constant in a register, and adding the
3553 // constant value to the immediate would produce a value closer to
3554 // zero than the immediate itself, then the formula isn't worthwhile.
3555 for (SmallVectorImpl<const SCEV *>::const_iterator
3556 J = NewF.BaseRegs.begin(), JE = NewF.BaseRegs.end();
3558 if (const SCEVConstant *C = dyn_cast<SCEVConstant>(*J))
3559 if ((C->getValue()->getValue() + NewF.AM.BaseOffs).abs().slt(
3560 abs64(NewF.AM.BaseOffs)) &&
3561 (C->getValue()->getValue() +
3562 NewF.AM.BaseOffs).countTrailingZeros() >=
3563 CountTrailingZeros_64(NewF.AM.BaseOffs))
3567 (void)InsertFormula(LU, LUIdx, NewF);
3576 /// GenerateAllReuseFormulae - Generate formulae for each use.
3578 LSRInstance::GenerateAllReuseFormulae() {
3579 // This is split into multiple loops so that hasRegsUsedByUsesOtherThan
3580 // queries are more precise.
3581 for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
3582 LSRUse &LU = Uses[LUIdx];
3583 for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
3584 GenerateReassociations(LU, LUIdx, LU.Formulae[i]);
3585 for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
3586 GenerateCombinations(LU, LUIdx, LU.Formulae[i]);
3588 for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
3589 LSRUse &LU = Uses[LUIdx];
3590 for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
3591 GenerateSymbolicOffsets(LU, LUIdx, LU.Formulae[i]);
3592 for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
3593 GenerateConstantOffsets(LU, LUIdx, LU.Formulae[i]);
3594 for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
3595 GenerateICmpZeroScales(LU, LUIdx, LU.Formulae[i]);
3596 for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
3597 GenerateScales(LU, LUIdx, LU.Formulae[i]);
3599 for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
3600 LSRUse &LU = Uses[LUIdx];
3601 for (size_t i = 0, f = LU.Formulae.size(); i != f; ++i)
3602 GenerateTruncates(LU, LUIdx, LU.Formulae[i]);
3605 GenerateCrossUseConstantOffsets();
3607 DEBUG(dbgs() << "\n"
3608 "After generating reuse formulae:\n";
3609 print_uses(dbgs()));
3612 /// If there are multiple formulae with the same set of registers used
3613 /// by other uses, pick the best one and delete the others.
3614 void LSRInstance::FilterOutUndesirableDedicatedRegisters() {
3615 DenseSet<const SCEV *> VisitedRegs;
3616 SmallPtrSet<const SCEV *, 16> Regs;
3617 SmallPtrSet<const SCEV *, 16> LoserRegs;
3619 bool ChangedFormulae = false;
3622 // Collect the best formula for each unique set of shared registers. This
3623 // is reset for each use.
3624 typedef DenseMap<SmallVector<const SCEV *, 2>, size_t, UniquifierDenseMapInfo>
3626 BestFormulaeTy BestFormulae;
3628 for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
3629 LSRUse &LU = Uses[LUIdx];
3630 DEBUG(dbgs() << "Filtering for use "; LU.print(dbgs()); dbgs() << '\n');
3633 for (size_t FIdx = 0, NumForms = LU.Formulae.size();
3634 FIdx != NumForms; ++FIdx) {
3635 Formula &F = LU.Formulae[FIdx];
3637 // Some formulas are instant losers. For example, they may depend on
3638 // nonexistent AddRecs from other loops. These need to be filtered
3639 // immediately, otherwise heuristics could choose them over others leading
3640 // to an unsatisfactory solution. Passing LoserRegs into RateFormula here
3641 // avoids the need to recompute this information across formulae using the
3642 // same bad AddRec. Passing LoserRegs is also essential unless we remove
3643 // the corresponding bad register from the Regs set.
3646 CostF.RateFormula(F, Regs, VisitedRegs, L, LU.Offsets, SE, DT,
3648 if (CostF.isLoser()) {
3649 // During initial formula generation, undesirable formulae are generated
3650 // by uses within other loops that have some non-trivial address mode or
3651 // use the postinc form of the IV. LSR needs to provide these formulae
3652 // as the basis of rediscovering the desired formula that uses an AddRec
3653 // corresponding to the existing phi. Once all formulae have been
3654 // generated, these initial losers may be pruned.
3655 DEBUG(dbgs() << " Filtering loser "; F.print(dbgs());
3659 SmallVector<const SCEV *, 2> Key;
3660 for (SmallVectorImpl<const SCEV *>::const_iterator J = F.BaseRegs.begin(),
3661 JE = F.BaseRegs.end(); J != JE; ++J) {
3662 const SCEV *Reg = *J;
3663 if (RegUses.isRegUsedByUsesOtherThan(Reg, LUIdx))
3667 RegUses.isRegUsedByUsesOtherThan(F.ScaledReg, LUIdx))
3668 Key.push_back(F.ScaledReg);
3669 // Unstable sort by host order ok, because this is only used for
3671 std::sort(Key.begin(), Key.end());
3673 std::pair<BestFormulaeTy::const_iterator, bool> P =
3674 BestFormulae.insert(std::make_pair(Key, FIdx));
3678 Formula &Best = LU.Formulae[P.first->second];
3682 CostBest.RateFormula(Best, Regs, VisitedRegs, L, LU.Offsets, SE, DT);
3683 if (CostF < CostBest)
3685 DEBUG(dbgs() << " Filtering out formula "; F.print(dbgs());
3687 " in favor of formula "; Best.print(dbgs());
3691 ChangedFormulae = true;
3693 LU.DeleteFormula(F);
3699 // Now that we've filtered out some formulae, recompute the Regs set.
3701 LU.RecomputeRegs(LUIdx, RegUses);
3703 // Reset this to prepare for the next use.
3704 BestFormulae.clear();
3707 DEBUG(if (ChangedFormulae) {
3709 "After filtering out undesirable candidates:\n";
3714 // This is a rough guess that seems to work fairly well.
3715 static const size_t ComplexityLimit = UINT16_MAX;
3717 /// EstimateSearchSpaceComplexity - Estimate the worst-case number of
3718 /// solutions the solver might have to consider. It almost never considers
3719 /// this many solutions because it prune the search space, but the pruning
3720 /// isn't always sufficient.
3721 size_t LSRInstance::EstimateSearchSpaceComplexity() const {
3723 for (SmallVectorImpl<LSRUse>::const_iterator I = Uses.begin(),
3724 E = Uses.end(); I != E; ++I) {
3725 size_t FSize = I->Formulae.size();
3726 if (FSize >= ComplexityLimit) {
3727 Power = ComplexityLimit;
3731 if (Power >= ComplexityLimit)
3737 /// NarrowSearchSpaceByDetectingSupersets - When one formula uses a superset
3738 /// of the registers of another formula, it won't help reduce register
3739 /// pressure (though it may not necessarily hurt register pressure); remove
3740 /// it to simplify the system.
3741 void LSRInstance::NarrowSearchSpaceByDetectingSupersets() {
3742 if (EstimateSearchSpaceComplexity() >= ComplexityLimit) {
3743 DEBUG(dbgs() << "The search space is too complex.\n");
3745 DEBUG(dbgs() << "Narrowing the search space by eliminating formulae "
3746 "which use a superset of registers used by other "
3749 for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
3750 LSRUse &LU = Uses[LUIdx];
3752 for (size_t i = 0, e = LU.Formulae.size(); i != e; ++i) {
3753 Formula &F = LU.Formulae[i];
3754 // Look for a formula with a constant or GV in a register. If the use
3755 // also has a formula with that same value in an immediate field,
3756 // delete the one that uses a register.
3757 for (SmallVectorImpl<const SCEV *>::const_iterator
3758 I = F.BaseRegs.begin(), E = F.BaseRegs.end(); I != E; ++I) {
3759 if (const SCEVConstant *C = dyn_cast<SCEVConstant>(*I)) {
3761 NewF.AM.BaseOffs += C->getValue()->getSExtValue();
3762 NewF.BaseRegs.erase(NewF.BaseRegs.begin() +
3763 (I - F.BaseRegs.begin()));
3764 if (LU.HasFormulaWithSameRegs(NewF)) {
3765 DEBUG(dbgs() << " Deleting "; F.print(dbgs()); dbgs() << '\n');
3766 LU.DeleteFormula(F);
3772 } else if (const SCEVUnknown *U = dyn_cast<SCEVUnknown>(*I)) {
3773 if (GlobalValue *GV = dyn_cast<GlobalValue>(U->getValue()))
3776 NewF.AM.BaseGV = GV;
3777 NewF.BaseRegs.erase(NewF.BaseRegs.begin() +
3778 (I - F.BaseRegs.begin()));
3779 if (LU.HasFormulaWithSameRegs(NewF)) {
3780 DEBUG(dbgs() << " Deleting "; F.print(dbgs());
3782 LU.DeleteFormula(F);
3793 LU.RecomputeRegs(LUIdx, RegUses);
3796 DEBUG(dbgs() << "After pre-selection:\n";
3797 print_uses(dbgs()));
3801 /// NarrowSearchSpaceByCollapsingUnrolledCode - When there are many registers
3802 /// for expressions like A, A+1, A+2, etc., allocate a single register for
3804 void LSRInstance::NarrowSearchSpaceByCollapsingUnrolledCode() {
3805 if (EstimateSearchSpaceComplexity() >= ComplexityLimit) {
3806 DEBUG(dbgs() << "The search space is too complex.\n");
3808 DEBUG(dbgs() << "Narrowing the search space by assuming that uses "
3809 "separated by a constant offset will use the same "
3812 // This is especially useful for unrolled loops.
3814 for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
3815 LSRUse &LU = Uses[LUIdx];
3816 for (SmallVectorImpl<Formula>::const_iterator I = LU.Formulae.begin(),
3817 E = LU.Formulae.end(); I != E; ++I) {
3818 const Formula &F = *I;
3819 if (F.AM.BaseOffs != 0 && F.AM.Scale == 0) {
3820 if (LSRUse *LUThatHas = FindUseWithSimilarFormula(F, LU)) {
3821 if (reconcileNewOffset(*LUThatHas, F.AM.BaseOffs,
3822 /*HasBaseReg=*/false,
3823 LU.Kind, LU.AccessTy)) {
3824 DEBUG(dbgs() << " Deleting use "; LU.print(dbgs());
3827 LUThatHas->AllFixupsOutsideLoop &= LU.AllFixupsOutsideLoop;
3829 // Update the relocs to reference the new use.
3830 for (SmallVectorImpl<LSRFixup>::iterator I = Fixups.begin(),
3831 E = Fixups.end(); I != E; ++I) {
3832 LSRFixup &Fixup = *I;
3833 if (Fixup.LUIdx == LUIdx) {
3834 Fixup.LUIdx = LUThatHas - &Uses.front();
3835 Fixup.Offset += F.AM.BaseOffs;
3836 // Add the new offset to LUThatHas' offset list.
3837 if (LUThatHas->Offsets.back() != Fixup.Offset) {
3838 LUThatHas->Offsets.push_back(Fixup.Offset);
3839 if (Fixup.Offset > LUThatHas->MaxOffset)
3840 LUThatHas->MaxOffset = Fixup.Offset;
3841 if (Fixup.Offset < LUThatHas->MinOffset)
3842 LUThatHas->MinOffset = Fixup.Offset;
3844 DEBUG(dbgs() << "New fixup has offset "
3845 << Fixup.Offset << '\n');
3847 if (Fixup.LUIdx == NumUses-1)
3848 Fixup.LUIdx = LUIdx;
3851 // Delete formulae from the new use which are no longer legal.
3853 for (size_t i = 0, e = LUThatHas->Formulae.size(); i != e; ++i) {
3854 Formula &F = LUThatHas->Formulae[i];
3855 if (!isLegalUse(F.AM,
3856 LUThatHas->MinOffset, LUThatHas->MaxOffset,
3857 LUThatHas->Kind, LUThatHas->AccessTy, TLI)) {
3858 DEBUG(dbgs() << " Deleting "; F.print(dbgs());
3860 LUThatHas->DeleteFormula(F);
3867 LUThatHas->RecomputeRegs(LUThatHas - &Uses.front(), RegUses);
3869 // Delete the old use.
3870 DeleteUse(LU, LUIdx);
3880 DEBUG(dbgs() << "After pre-selection:\n";
3881 print_uses(dbgs()));
3885 /// NarrowSearchSpaceByRefilteringUndesirableDedicatedRegisters - Call
3886 /// FilterOutUndesirableDedicatedRegisters again, if necessary, now that
3887 /// we've done more filtering, as it may be able to find more formulae to
3889 void LSRInstance::NarrowSearchSpaceByRefilteringUndesirableDedicatedRegisters(){
3890 if (EstimateSearchSpaceComplexity() >= ComplexityLimit) {
3891 DEBUG(dbgs() << "The search space is too complex.\n");
3893 DEBUG(dbgs() << "Narrowing the search space by re-filtering out "
3894 "undesirable dedicated registers.\n");
3896 FilterOutUndesirableDedicatedRegisters();
3898 DEBUG(dbgs() << "After pre-selection:\n";
3899 print_uses(dbgs()));
3903 /// NarrowSearchSpaceByPickingWinnerRegs - Pick a register which seems likely
3904 /// to be profitable, and then in any use which has any reference to that
3905 /// register, delete all formulae which do not reference that register.
3906 void LSRInstance::NarrowSearchSpaceByPickingWinnerRegs() {
3907 // With all other options exhausted, loop until the system is simple
3908 // enough to handle.
3909 SmallPtrSet<const SCEV *, 4> Taken;
3910 while (EstimateSearchSpaceComplexity() >= ComplexityLimit) {
3911 // Ok, we have too many of formulae on our hands to conveniently handle.
3912 // Use a rough heuristic to thin out the list.
3913 DEBUG(dbgs() << "The search space is too complex.\n");
3915 // Pick the register which is used by the most LSRUses, which is likely
3916 // to be a good reuse register candidate.
3917 const SCEV *Best = 0;
3918 unsigned BestNum = 0;
3919 for (RegUseTracker::const_iterator I = RegUses.begin(), E = RegUses.end();
3921 const SCEV *Reg = *I;
3922 if (Taken.count(Reg))
3927 unsigned Count = RegUses.getUsedByIndices(Reg).count();
3928 if (Count > BestNum) {
3935 DEBUG(dbgs() << "Narrowing the search space by assuming " << *Best
3936 << " will yield profitable reuse.\n");
3939 // In any use with formulae which references this register, delete formulae
3940 // which don't reference it.
3941 for (size_t LUIdx = 0, NumUses = Uses.size(); LUIdx != NumUses; ++LUIdx) {
3942 LSRUse &LU = Uses[LUIdx];
3943 if (!LU.Regs.count(Best)) continue;
3946 for (size_t i = 0, e = LU.Formulae.size(); i != e; ++i) {
3947 Formula &F = LU.Formulae[i];
3948 if (!F.referencesReg(Best)) {
3949 DEBUG(dbgs() << " Deleting "; F.print(dbgs()); dbgs() << '\n');
3950 LU.DeleteFormula(F);
3954 assert(e != 0 && "Use has no formulae left! Is Regs inconsistent?");
3960 LU.RecomputeRegs(LUIdx, RegUses);
3963 DEBUG(dbgs() << "After pre-selection:\n";
3964 print_uses(dbgs()));
3968 /// NarrowSearchSpaceUsingHeuristics - If there are an extraordinary number of
3969 /// formulae to choose from, use some rough heuristics to prune down the number
3970 /// of formulae. This keeps the main solver from taking an extraordinary amount
3971 /// of time in some worst-case scenarios.
3972 void LSRInstance::NarrowSearchSpaceUsingHeuristics() {
3973 NarrowSearchSpaceByDetectingSupersets();
3974 NarrowSearchSpaceByCollapsingUnrolledCode();
3975 NarrowSearchSpaceByRefilteringUndesirableDedicatedRegisters();
3976 NarrowSearchSpaceByPickingWinnerRegs();
3979 /// SolveRecurse - This is the recursive solver.
3980 void LSRInstance::SolveRecurse(SmallVectorImpl<const Formula *> &Solution,
3982 SmallVectorImpl<const Formula *> &Workspace,
3983 const Cost &CurCost,
3984 const SmallPtrSet<const SCEV *, 16> &CurRegs,
3985 DenseSet<const SCEV *> &VisitedRegs) const {
3988 // - use more aggressive filtering
3989 // - sort the formula so that the most profitable solutions are found first
3990 // - sort the uses too
3992 // - don't compute a cost, and then compare. compare while computing a cost
3994 // - track register sets with SmallBitVector
3996 const LSRUse &LU = Uses[Workspace.size()];
3998 // If this use references any register that's already a part of the
3999 // in-progress solution, consider it a requirement that a formula must
4000 // reference that register in order to be considered. This prunes out
4001 // unprofitable searching.
4002 SmallSetVector<const SCEV *, 4> ReqRegs;
4003 for (SmallPtrSet<const SCEV *, 16>::const_iterator I = CurRegs.begin(),
4004 E = CurRegs.end(); I != E; ++I)
4005 if (LU.Regs.count(*I))
4008 SmallPtrSet<const SCEV *, 16> NewRegs;
4010 for (SmallVectorImpl<Formula>::const_iterator I = LU.Formulae.begin(),
4011 E = LU.Formulae.end(); I != E; ++I) {
4012 const Formula &F = *I;
4014 // Ignore formulae which do not use any of the required registers.
4015 bool SatisfiedReqReg = true;
4016 for (SmallSetVector<const SCEV *, 4>::const_iterator J = ReqRegs.begin(),
4017 JE = ReqRegs.end(); J != JE; ++J) {
4018 const SCEV *Reg = *J;
4019 if ((!F.ScaledReg || F.ScaledReg != Reg) &&
4020 std::find(F.BaseRegs.begin(), F.BaseRegs.end(), Reg) ==
4022 SatisfiedReqReg = false;
4026 if (!SatisfiedReqReg) {
4027 // If none of the formulae satisfied the required registers, then we could
4028 // clear ReqRegs and try again. Currently, we simply give up in this case.
4032 // Evaluate the cost of the current formula. If it's already worse than
4033 // the current best, prune the search at that point.
4036 NewCost.RateFormula(F, NewRegs, VisitedRegs, L, LU.Offsets, SE, DT);
4037 if (NewCost < SolutionCost) {
4038 Workspace.push_back(&F);
4039 if (Workspace.size() != Uses.size()) {
4040 SolveRecurse(Solution, SolutionCost, Workspace, NewCost,
4041 NewRegs, VisitedRegs);
4042 if (F.getNumRegs() == 1 && Workspace.size() == 1)
4043 VisitedRegs.insert(F.ScaledReg ? F.ScaledReg : F.BaseRegs[0]);
4045 DEBUG(dbgs() << "New best at "; NewCost.print(dbgs());
4046 dbgs() << ".\n Regs:";
4047 for (SmallPtrSet<const SCEV *, 16>::const_iterator
4048 I = NewRegs.begin(), E = NewRegs.end(); I != E; ++I)
4049 dbgs() << ' ' << **I;
4052 SolutionCost = NewCost;
4053 Solution = Workspace;
4055 Workspace.pop_back();
4060 /// Solve - Choose one formula from each use. Return the results in the given
4061 /// Solution vector.
4062 void LSRInstance::Solve(SmallVectorImpl<const Formula *> &Solution) const {
4063 SmallVector<const Formula *, 8> Workspace;
4065 SolutionCost.Loose();
4067 SmallPtrSet<const SCEV *, 16> CurRegs;
4068 DenseSet<const SCEV *> VisitedRegs;
4069 Workspace.reserve(Uses.size());
4071 // SolveRecurse does all the work.
4072 SolveRecurse(Solution, SolutionCost, Workspace, CurCost,
4073 CurRegs, VisitedRegs);
4074 if (Solution.empty()) {
4075 DEBUG(dbgs() << "\nNo Satisfactory Solution\n");
4079 // Ok, we've now made all our decisions.
4080 DEBUG(dbgs() << "\n"
4081 "The chosen solution requires "; SolutionCost.print(dbgs());
4083 for (size_t i = 0, e = Uses.size(); i != e; ++i) {
4085 Uses[i].print(dbgs());
4088 Solution[i]->print(dbgs());
4092 assert(Solution.size() == Uses.size() && "Malformed solution!");
4095 /// HoistInsertPosition - Helper for AdjustInsertPositionForExpand. Climb up
4096 /// the dominator tree far as we can go while still being dominated by the
4097 /// input positions. This helps canonicalize the insert position, which
4098 /// encourages sharing.
4099 BasicBlock::iterator
4100 LSRInstance::HoistInsertPosition(BasicBlock::iterator IP,
4101 const SmallVectorImpl<Instruction *> &Inputs)
4104 const Loop *IPLoop = LI.getLoopFor(IP->getParent());
4105 unsigned IPLoopDepth = IPLoop ? IPLoop->getLoopDepth() : 0;
4108 for (DomTreeNode *Rung = DT.getNode(IP->getParent()); ; ) {
4109 if (!Rung) return IP;
4110 Rung = Rung->getIDom();
4111 if (!Rung) return IP;
4112 IDom = Rung->getBlock();
4114 // Don't climb into a loop though.
4115 const Loop *IDomLoop = LI.getLoopFor(IDom);
4116 unsigned IDomDepth = IDomLoop ? IDomLoop->getLoopDepth() : 0;
4117 if (IDomDepth <= IPLoopDepth &&
4118 (IDomDepth != IPLoopDepth || IDomLoop == IPLoop))
4122 bool AllDominate = true;
4123 Instruction *BetterPos = 0;
4124 Instruction *Tentative = IDom->getTerminator();
4125 for (SmallVectorImpl<Instruction *>::const_iterator I = Inputs.begin(),
4126 E = Inputs.end(); I != E; ++I) {
4127 Instruction *Inst = *I;
4128 if (Inst == Tentative || !DT.dominates(Inst, Tentative)) {
4129 AllDominate = false;
4132 // Attempt to find an insert position in the middle of the block,
4133 // instead of at the end, so that it can be used for other expansions.
4134 if (IDom == Inst->getParent() &&
4135 (!BetterPos || DT.dominates(BetterPos, Inst)))
4136 BetterPos = llvm::next(BasicBlock::iterator(Inst));
4149 /// AdjustInsertPositionForExpand - Determine an input position which will be
4150 /// dominated by the operands and which will dominate the result.
4151 BasicBlock::iterator
4152 LSRInstance::AdjustInsertPositionForExpand(BasicBlock::iterator LowestIP,
4155 SCEVExpander &Rewriter) const {
4156 // Collect some instructions which must be dominated by the
4157 // expanding replacement. These must be dominated by any operands that
4158 // will be required in the expansion.
4159 SmallVector<Instruction *, 4> Inputs;
4160 if (Instruction *I = dyn_cast<Instruction>(LF.OperandValToReplace))
4161 Inputs.push_back(I);
4162 if (LU.Kind == LSRUse::ICmpZero)
4163 if (Instruction *I =
4164 dyn_cast<Instruction>(cast<ICmpInst>(LF.UserInst)->getOperand(1)))
4165 Inputs.push_back(I);
4166 if (LF.PostIncLoops.count(L)) {
4167 if (LF.isUseFullyOutsideLoop(L))
4168 Inputs.push_back(L->getLoopLatch()->getTerminator());
4170 Inputs.push_back(IVIncInsertPos);
4172 // The expansion must also be dominated by the increment positions of any
4173 // loops it for which it is using post-inc mode.
4174 for (PostIncLoopSet::const_iterator I = LF.PostIncLoops.begin(),
4175 E = LF.PostIncLoops.end(); I != E; ++I) {
4176 const Loop *PIL = *I;
4177 if (PIL == L) continue;
4179 // Be dominated by the loop exit.
4180 SmallVector<BasicBlock *, 4> ExitingBlocks;
4181 PIL->getExitingBlocks(ExitingBlocks);
4182 if (!ExitingBlocks.empty()) {
4183 BasicBlock *BB = ExitingBlocks[0];
4184 for (unsigned i = 1, e = ExitingBlocks.size(); i != e; ++i)
4185 BB = DT.findNearestCommonDominator(BB, ExitingBlocks[i]);
4186 Inputs.push_back(BB->getTerminator());
4190 assert(!isa<PHINode>(LowestIP) && !isa<LandingPadInst>(LowestIP)
4191 && !isa<DbgInfoIntrinsic>(LowestIP) &&
4192 "Insertion point must be a normal instruction");
4194 // Then, climb up the immediate dominator tree as far as we can go while
4195 // still being dominated by the input positions.
4196 BasicBlock::iterator IP = HoistInsertPosition(LowestIP, Inputs);
4198 // Don't insert instructions before PHI nodes.
4199 while (isa<PHINode>(IP)) ++IP;
4201 // Ignore landingpad instructions.
4202 while (isa<LandingPadInst>(IP)) ++IP;
4204 // Ignore debug intrinsics.
4205 while (isa<DbgInfoIntrinsic>(IP)) ++IP;
4207 // Set IP below instructions recently inserted by SCEVExpander. This keeps the
4208 // IP consistent across expansions and allows the previously inserted
4209 // instructions to be reused by subsequent expansion.
4210 while (Rewriter.isInsertedInstruction(IP) && IP != LowestIP) ++IP;
4215 /// Expand - Emit instructions for the leading candidate expression for this
4216 /// LSRUse (this is called "expanding").
4217 Value *LSRInstance::Expand(const LSRFixup &LF,
4219 BasicBlock::iterator IP,
4220 SCEVExpander &Rewriter,
4221 SmallVectorImpl<WeakVH> &DeadInsts) const {
4222 const LSRUse &LU = Uses[LF.LUIdx];
4224 // Determine an input position which will be dominated by the operands and
4225 // which will dominate the result.
4226 IP = AdjustInsertPositionForExpand(IP, LF, LU, Rewriter);
4228 // Inform the Rewriter if we have a post-increment use, so that it can
4229 // perform an advantageous expansion.
4230 Rewriter.setPostInc(LF.PostIncLoops);
4232 // This is the type that the user actually needs.
4233 Type *OpTy = LF.OperandValToReplace->getType();
4234 // This will be the type that we'll initially expand to.
4235 Type *Ty = F.getType();
4237 // No type known; just expand directly to the ultimate type.
4239 else if (SE.getEffectiveSCEVType(Ty) == SE.getEffectiveSCEVType(OpTy))
4240 // Expand directly to the ultimate type if it's the right size.
4242 // This is the type to do integer arithmetic in.
4243 Type *IntTy = SE.getEffectiveSCEVType(Ty);
4245 // Build up a list of operands to add together to form the full base.
4246 SmallVector<const SCEV *, 8> Ops;
4248 // Expand the BaseRegs portion.
4249 for (SmallVectorImpl<const SCEV *>::const_iterator I = F.BaseRegs.begin(),
4250 E = F.BaseRegs.end(); I != E; ++I) {
4251 const SCEV *Reg = *I;
4252 assert(!Reg->isZero() && "Zero allocated in a base register!");
4254 // If we're expanding for a post-inc user, make the post-inc adjustment.
4255 PostIncLoopSet &Loops = const_cast<PostIncLoopSet &>(LF.PostIncLoops);
4256 Reg = TransformForPostIncUse(Denormalize, Reg,
4257 LF.UserInst, LF.OperandValToReplace,
4260 Ops.push_back(SE.getUnknown(Rewriter.expandCodeFor(Reg, 0, IP)));
4263 // Flush the operand list to suppress SCEVExpander hoisting.
4265 Value *FullV = Rewriter.expandCodeFor(SE.getAddExpr(Ops), Ty, IP);
4267 Ops.push_back(SE.getUnknown(FullV));
4270 // Expand the ScaledReg portion.
4271 Value *ICmpScaledV = 0;
4272 if (F.AM.Scale != 0) {
4273 const SCEV *ScaledS = F.ScaledReg;
4275 // If we're expanding for a post-inc user, make the post-inc adjustment.
4276 PostIncLoopSet &Loops = const_cast<PostIncLoopSet &>(LF.PostIncLoops);
4277 ScaledS = TransformForPostIncUse(Denormalize, ScaledS,
4278 LF.UserInst, LF.OperandValToReplace,
4281 if (LU.Kind == LSRUse::ICmpZero) {
4282 // An interesting way of "folding" with an icmp is to use a negated
4283 // scale, which we'll implement by inserting it into the other operand
4285 assert(F.AM.Scale == -1 &&
4286 "The only scale supported by ICmpZero uses is -1!");
4287 ICmpScaledV = Rewriter.expandCodeFor(ScaledS, 0, IP);
4289 // Otherwise just expand the scaled register and an explicit scale,
4290 // which is expected to be matched as part of the address.
4291 ScaledS = SE.getUnknown(Rewriter.expandCodeFor(ScaledS, 0, IP));
4292 ScaledS = SE.getMulExpr(ScaledS,
4293 SE.getConstant(ScaledS->getType(), F.AM.Scale));
4294 Ops.push_back(ScaledS);
4296 // Flush the operand list to suppress SCEVExpander hoisting.
4297 Value *FullV = Rewriter.expandCodeFor(SE.getAddExpr(Ops), Ty, IP);
4299 Ops.push_back(SE.getUnknown(FullV));
4303 // Expand the GV portion.
4305 Ops.push_back(SE.getUnknown(F.AM.BaseGV));
4307 // Flush the operand list to suppress SCEVExpander hoisting.
4308 Value *FullV = Rewriter.expandCodeFor(SE.getAddExpr(Ops), Ty, IP);
4310 Ops.push_back(SE.getUnknown(FullV));
4313 // Expand the immediate portion.
4314 int64_t Offset = (uint64_t)F.AM.BaseOffs + LF.Offset;
4316 if (LU.Kind == LSRUse::ICmpZero) {
4317 // The other interesting way of "folding" with an ICmpZero is to use a
4318 // negated immediate.
4320 ICmpScaledV = ConstantInt::get(IntTy, -(uint64_t)Offset);
4322 Ops.push_back(SE.getUnknown(ICmpScaledV));
4323 ICmpScaledV = ConstantInt::get(IntTy, Offset);
4326 // Just add the immediate values. These again are expected to be matched
4327 // as part of the address.
4328 Ops.push_back(SE.getUnknown(ConstantInt::getSigned(IntTy, Offset)));
4332 // Expand the unfolded offset portion.
4333 int64_t UnfoldedOffset = F.UnfoldedOffset;
4334 if (UnfoldedOffset != 0) {
4335 // Just add the immediate values.
4336 Ops.push_back(SE.getUnknown(ConstantInt::getSigned(IntTy,
4340 // Emit instructions summing all the operands.
4341 const SCEV *FullS = Ops.empty() ?
4342 SE.getConstant(IntTy, 0) :
4344 Value *FullV = Rewriter.expandCodeFor(FullS, Ty, IP);
4346 // We're done expanding now, so reset the rewriter.
4347 Rewriter.clearPostInc();
4349 // An ICmpZero Formula represents an ICmp which we're handling as a
4350 // comparison against zero. Now that we've expanded an expression for that
4351 // form, update the ICmp's other operand.
4352 if (LU.Kind == LSRUse::ICmpZero) {
4353 ICmpInst *CI = cast<ICmpInst>(LF.UserInst);
4354 DeadInsts.push_back(CI->getOperand(1));
4355 assert(!F.AM.BaseGV && "ICmp does not support folding a global value and "
4356 "a scale at the same time!");
4357 if (F.AM.Scale == -1) {
4358 if (ICmpScaledV->getType() != OpTy) {
4360 CastInst::Create(CastInst::getCastOpcode(ICmpScaledV, false,
4362 ICmpScaledV, OpTy, "tmp", CI);
4365 CI->setOperand(1, ICmpScaledV);
4367 assert(F.AM.Scale == 0 &&
4368 "ICmp does not support folding a global value and "
4369 "a scale at the same time!");
4370 Constant *C = ConstantInt::getSigned(SE.getEffectiveSCEVType(OpTy),
4372 if (C->getType() != OpTy)
4373 C = ConstantExpr::getCast(CastInst::getCastOpcode(C, false,
4377 CI->setOperand(1, C);
4384 /// RewriteForPHI - Helper for Rewrite. PHI nodes are special because the use
4385 /// of their operands effectively happens in their predecessor blocks, so the
4386 /// expression may need to be expanded in multiple places.
4387 void LSRInstance::RewriteForPHI(PHINode *PN,
4390 SCEVExpander &Rewriter,
4391 SmallVectorImpl<WeakVH> &DeadInsts,
4393 DenseMap<BasicBlock *, Value *> Inserted;
4394 for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
4395 if (PN->getIncomingValue(i) == LF.OperandValToReplace) {
4396 BasicBlock *BB = PN->getIncomingBlock(i);
4398 // If this is a critical edge, split the edge so that we do not insert
4399 // the code on all predecessor/successor paths. We do this unless this
4400 // is the canonical backedge for this loop, which complicates post-inc
4402 if (e != 1 && BB->getTerminator()->getNumSuccessors() > 1 &&
4403 !isa<IndirectBrInst>(BB->getTerminator())) {
4404 BasicBlock *Parent = PN->getParent();
4405 Loop *PNLoop = LI.getLoopFor(Parent);
4406 if (!PNLoop || Parent != PNLoop->getHeader()) {
4407 // Split the critical edge.
4408 BasicBlock *NewBB = 0;
4409 if (!Parent->isLandingPad()) {
4410 NewBB = SplitCriticalEdge(BB, Parent, P,
4411 /*MergeIdenticalEdges=*/true,
4412 /*DontDeleteUselessPhis=*/true);
4414 SmallVector<BasicBlock*, 2> NewBBs;
4415 SplitLandingPadPredecessors(Parent, BB, "", "", P, NewBBs);
4419 // If PN is outside of the loop and BB is in the loop, we want to
4420 // move the block to be immediately before the PHI block, not
4421 // immediately after BB.
4422 if (L->contains(BB) && !L->contains(PN))
4423 NewBB->moveBefore(PN->getParent());
4425 // Splitting the edge can reduce the number of PHI entries we have.
4426 e = PN->getNumIncomingValues();
4428 i = PN->getBasicBlockIndex(BB);
4432 std::pair<DenseMap<BasicBlock *, Value *>::iterator, bool> Pair =
4433 Inserted.insert(std::make_pair(BB, static_cast<Value *>(0)));
4435 PN->setIncomingValue(i, Pair.first->second);
4437 Value *FullV = Expand(LF, F, BB->getTerminator(), Rewriter, DeadInsts);
4439 // If this is reuse-by-noop-cast, insert the noop cast.
4440 Type *OpTy = LF.OperandValToReplace->getType();
4441 if (FullV->getType() != OpTy)
4443 CastInst::Create(CastInst::getCastOpcode(FullV, false,
4445 FullV, LF.OperandValToReplace->getType(),
4446 "tmp", BB->getTerminator());
4448 PN->setIncomingValue(i, FullV);
4449 Pair.first->second = FullV;
4454 /// Rewrite - Emit instructions for the leading candidate expression for this
4455 /// LSRUse (this is called "expanding"), and update the UserInst to reference
4456 /// the newly expanded value.
4457 void LSRInstance::Rewrite(const LSRFixup &LF,
4459 SCEVExpander &Rewriter,
4460 SmallVectorImpl<WeakVH> &DeadInsts,
4462 // First, find an insertion point that dominates UserInst. For PHI nodes,
4463 // find the nearest block which dominates all the relevant uses.
4464 if (PHINode *PN = dyn_cast<PHINode>(LF.UserInst)) {
4465 RewriteForPHI(PN, LF, F, Rewriter, DeadInsts, P);
4467 Value *FullV = Expand(LF, F, LF.UserInst, Rewriter, DeadInsts);
4469 // If this is reuse-by-noop-cast, insert the noop cast.
4470 Type *OpTy = LF.OperandValToReplace->getType();
4471 if (FullV->getType() != OpTy) {
4473 CastInst::Create(CastInst::getCastOpcode(FullV, false, OpTy, false),
4474 FullV, OpTy, "tmp", LF.UserInst);
4478 // Update the user. ICmpZero is handled specially here (for now) because
4479 // Expand may have updated one of the operands of the icmp already, and
4480 // its new value may happen to be equal to LF.OperandValToReplace, in
4481 // which case doing replaceUsesOfWith leads to replacing both operands
4482 // with the same value. TODO: Reorganize this.
4483 if (Uses[LF.LUIdx].Kind == LSRUse::ICmpZero)
4484 LF.UserInst->setOperand(0, FullV);
4486 LF.UserInst->replaceUsesOfWith(LF.OperandValToReplace, FullV);
4489 DeadInsts.push_back(LF.OperandValToReplace);
4492 /// ImplementSolution - Rewrite all the fixup locations with new values,
4493 /// following the chosen solution.
4495 LSRInstance::ImplementSolution(const SmallVectorImpl<const Formula *> &Solution,
4497 // Keep track of instructions we may have made dead, so that
4498 // we can remove them after we are done working.
4499 SmallVector<WeakVH, 16> DeadInsts;
4501 SCEVExpander Rewriter(SE, "lsr");
4503 Rewriter.setDebugType(DEBUG_TYPE);
4505 Rewriter.disableCanonicalMode();
4506 Rewriter.enableLSRMode();
4507 Rewriter.setIVIncInsertPos(L, IVIncInsertPos);
4509 // Mark phi nodes that terminate chains so the expander tries to reuse them.
4510 for (SmallVectorImpl<IVChain>::const_iterator ChainI = IVChainVec.begin(),
4511 ChainE = IVChainVec.end(); ChainI != ChainE; ++ChainI) {
4512 if (PHINode *PN = dyn_cast<PHINode>(ChainI->tailUserInst()))
4513 Rewriter.setChainedPhi(PN);
4516 // Expand the new value definitions and update the users.
4517 for (SmallVectorImpl<LSRFixup>::const_iterator I = Fixups.begin(),
4518 E = Fixups.end(); I != E; ++I) {
4519 const LSRFixup &Fixup = *I;
4521 Rewrite(Fixup, *Solution[Fixup.LUIdx], Rewriter, DeadInsts, P);
4526 for (SmallVectorImpl<IVChain>::const_iterator ChainI = IVChainVec.begin(),
4527 ChainE = IVChainVec.end(); ChainI != ChainE; ++ChainI) {
4528 GenerateIVChain(*ChainI, Rewriter, DeadInsts);
4531 // Clean up after ourselves. This must be done before deleting any
4535 Changed |= DeleteTriviallyDeadInstructions(DeadInsts);
4538 LSRInstance::LSRInstance(const TargetLowering *tli, Loop *l, Pass *P)
4539 : IU(P->getAnalysis<IVUsers>()),
4540 SE(P->getAnalysis<ScalarEvolution>()),
4541 DT(P->getAnalysis<DominatorTree>()),
4542 LI(P->getAnalysis<LoopInfo>()),
4543 TLI(tli), L(l), Changed(false), IVIncInsertPos(0) {
4545 // If LoopSimplify form is not available, stay out of trouble.
4546 if (!L->isLoopSimplifyForm())
4549 // If there's no interesting work to be done, bail early.
4550 if (IU.empty()) return;
4552 // If there's too much analysis to be done, bail early. We won't be able to
4553 // model the problem anyway.
4554 unsigned NumUsers = 0;
4555 for (IVUsers::const_iterator UI = IU.begin(), E = IU.end(); UI != E; ++UI) {
4556 if (++NumUsers > MaxIVUsers) {
4557 DEBUG(dbgs() << "LSR skipping loop, too many IV Users in " << *L
4564 // All dominating loops must have preheaders, or SCEVExpander may not be able
4565 // to materialize an AddRecExpr whose Start is an outer AddRecExpr.
4567 // IVUsers analysis should only create users that are dominated by simple loop
4568 // headers. Since this loop should dominate all of its users, its user list
4569 // should be empty if this loop itself is not within a simple loop nest.
4570 for (DomTreeNode *Rung = DT.getNode(L->getLoopPreheader());
4571 Rung; Rung = Rung->getIDom()) {
4572 BasicBlock *BB = Rung->getBlock();
4573 const Loop *DomLoop = LI.getLoopFor(BB);
4574 if (DomLoop && DomLoop->getHeader() == BB) {
4575 assert(DomLoop->getLoopPreheader() && "LSR needs a simplified loop nest");
4580 DEBUG(dbgs() << "\nLSR on loop ";
4581 WriteAsOperand(dbgs(), L->getHeader(), /*PrintType=*/false);
4584 // First, perform some low-level loop optimizations.
4586 OptimizeLoopTermCond();
4588 // If loop preparation eliminates all interesting IV users, bail.
4589 if (IU.empty()) return;
4591 // Skip nested loops until we can model them better with formulae.
4593 DEBUG(dbgs() << "LSR skipping outer loop " << *L << "\n");
4597 // Start collecting data and preparing for the solver.
4599 CollectInterestingTypesAndFactors();
4600 CollectFixupsAndInitialFormulae();
4601 CollectLoopInvariantFixupsAndFormulae();
4603 assert(!Uses.empty() && "IVUsers reported at least one use");
4604 DEBUG(dbgs() << "LSR found " << Uses.size() << " uses:\n";
4605 print_uses(dbgs()));
4607 // Now use the reuse data to generate a bunch of interesting ways
4608 // to formulate the values needed for the uses.
4609 GenerateAllReuseFormulae();
4611 FilterOutUndesirableDedicatedRegisters();
4612 NarrowSearchSpaceUsingHeuristics();
4614 SmallVector<const Formula *, 8> Solution;
4617 // Release memory that is no longer needed.
4622 if (Solution.empty())
4626 // Formulae should be legal.
4627 for (SmallVectorImpl<LSRUse>::const_iterator I = Uses.begin(),
4628 E = Uses.end(); I != E; ++I) {
4629 const LSRUse &LU = *I;
4630 for (SmallVectorImpl<Formula>::const_iterator J = LU.Formulae.begin(),
4631 JE = LU.Formulae.end(); J != JE; ++J)
4632 assert(isLegalUse(J->AM, LU.MinOffset, LU.MaxOffset,
4633 LU.Kind, LU.AccessTy, TLI) &&
4634 "Illegal formula generated!");
4638 // Now that we've decided what we want, make it so.
4639 ImplementSolution(Solution, P);
4642 void LSRInstance::print_factors_and_types(raw_ostream &OS) const {
4643 if (Factors.empty() && Types.empty()) return;
4645 OS << "LSR has identified the following interesting factors and types: ";
4648 for (SmallSetVector<int64_t, 8>::const_iterator
4649 I = Factors.begin(), E = Factors.end(); I != E; ++I) {
4650 if (!First) OS << ", ";
4655 for (SmallSetVector<Type *, 4>::const_iterator
4656 I = Types.begin(), E = Types.end(); I != E; ++I) {
4657 if (!First) OS << ", ";
4659 OS << '(' << **I << ')';
4664 void LSRInstance::print_fixups(raw_ostream &OS) const {
4665 OS << "LSR is examining the following fixup sites:\n";
4666 for (SmallVectorImpl<LSRFixup>::const_iterator I = Fixups.begin(),
4667 E = Fixups.end(); I != E; ++I) {
4674 void LSRInstance::print_uses(raw_ostream &OS) const {
4675 OS << "LSR is examining the following uses:\n";
4676 for (SmallVectorImpl<LSRUse>::const_iterator I = Uses.begin(),
4677 E = Uses.end(); I != E; ++I) {
4678 const LSRUse &LU = *I;
4682 for (SmallVectorImpl<Formula>::const_iterator J = LU.Formulae.begin(),
4683 JE = LU.Formulae.end(); J != JE; ++J) {
4691 void LSRInstance::print(raw_ostream &OS) const {
4692 print_factors_and_types(OS);
4697 void LSRInstance::dump() const {
4698 print(errs()); errs() << '\n';
4703 class LoopStrengthReduce : public LoopPass {
4704 /// TLI - Keep a pointer of a TargetLowering to consult for determining
4705 /// transformation profitability.
4706 const TargetLowering *const TLI;
4709 static char ID; // Pass ID, replacement for typeid
4710 explicit LoopStrengthReduce(const TargetLowering *tli = 0);
4713 bool runOnLoop(Loop *L, LPPassManager &LPM);
4714 void getAnalysisUsage(AnalysisUsage &AU) const;
4719 char LoopStrengthReduce::ID = 0;
4720 INITIALIZE_PASS_BEGIN(LoopStrengthReduce, "loop-reduce",
4721 "Loop Strength Reduction", false, false)
4722 INITIALIZE_PASS_DEPENDENCY(DominatorTree)
4723 INITIALIZE_PASS_DEPENDENCY(ScalarEvolution)
4724 INITIALIZE_PASS_DEPENDENCY(IVUsers)
4725 INITIALIZE_PASS_DEPENDENCY(LoopInfo)
4726 INITIALIZE_PASS_DEPENDENCY(LoopSimplify)
4727 INITIALIZE_PASS_END(LoopStrengthReduce, "loop-reduce",
4728 "Loop Strength Reduction", false, false)
4731 Pass *llvm::createLoopStrengthReducePass(const TargetLowering *TLI) {
4732 return new LoopStrengthReduce(TLI);
4735 LoopStrengthReduce::LoopStrengthReduce(const TargetLowering *tli)
4736 : LoopPass(ID), TLI(tli) {
4737 initializeLoopStrengthReducePass(*PassRegistry::getPassRegistry());
4740 void LoopStrengthReduce::getAnalysisUsage(AnalysisUsage &AU) const {
4741 // We split critical edges, so we change the CFG. However, we do update
4742 // many analyses if they are around.
4743 AU.addPreservedID(LoopSimplifyID);
4745 AU.addRequired<LoopInfo>();
4746 AU.addPreserved<LoopInfo>();
4747 AU.addRequiredID(LoopSimplifyID);
4748 AU.addRequired<DominatorTree>();
4749 AU.addPreserved<DominatorTree>();
4750 AU.addRequired<ScalarEvolution>();
4751 AU.addPreserved<ScalarEvolution>();
4752 // Requiring LoopSimplify a second time here prevents IVUsers from running
4753 // twice, since LoopSimplify was invalidated by running ScalarEvolution.
4754 AU.addRequiredID(LoopSimplifyID);
4755 AU.addRequired<IVUsers>();
4756 AU.addPreserved<IVUsers>();
4759 bool LoopStrengthReduce::runOnLoop(Loop *L, LPPassManager & /*LPM*/) {
4760 bool Changed = false;
4762 // Run the main LSR transformation.
4763 Changed |= LSRInstance(TLI, L, this).getChanged();
4765 // Remove any extra phis created by processing inner loops.
4766 Changed |= DeleteDeadPHIs(L->getHeader());
4767 if (EnablePhiElim) {
4768 SmallVector<WeakVH, 16> DeadInsts;
4769 SCEVExpander Rewriter(getAnalysis<ScalarEvolution>(), "lsr");
4771 Rewriter.setDebugType(DEBUG_TYPE);
4773 unsigned numFolded = Rewriter.
4774 replaceCongruentIVs(L, &getAnalysis<DominatorTree>(), DeadInsts, TLI);
4777 DeleteTriviallyDeadInstructions(DeadInsts);
4778 DeleteDeadPHIs(L->getHeader());