1 //===- LoopSimplify.cpp - Loop Canonicalization Pass ----------------------===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 // This pass performs several transformations to transform natural loops into a
11 // simpler form, which makes subsequent analyses and transformations simpler and
14 // Loop pre-header insertion guarantees that there is a single, non-critical
15 // entry edge from outside of the loop to the loop header. This simplifies a
16 // number of analyses and transformations, such as LICM.
18 // Loop exit-block insertion guarantees that all exit blocks from the loop
19 // (blocks which are outside of the loop that have predecessors inside of the
20 // loop) only have predecessors from inside of the loop (and are thus dominated
21 // by the loop header). This simplifies transformations such as store-sinking
22 // that are built into LICM.
24 // This pass also guarantees that loops will have exactly one backedge.
26 // Indirectbr instructions introduce several complications. If the loop
27 // contains or is entered by an indirectbr instruction, it may not be possible
28 // to transform the loop and make these guarantees. Client code should check
29 // that these conditions are true before relying on them.
31 // Note that the simplifycfg pass will clean up blocks which are split out but
32 // end up being unnecessary, so usage of this pass should not pessimize
35 // This pass obviously modifies the CFG, but updates loop information and
36 // dominator information.
38 //===----------------------------------------------------------------------===//
40 #include "llvm/Transforms/Scalar.h"
41 #include "llvm/ADT/DepthFirstIterator.h"
42 #include "llvm/ADT/SetOperations.h"
43 #include "llvm/ADT/SetVector.h"
44 #include "llvm/ADT/SmallVector.h"
45 #include "llvm/ADT/Statistic.h"
46 #include "llvm/Analysis/AliasAnalysis.h"
47 #include "llvm/Analysis/AssumptionCache.h"
48 #include "llvm/Analysis/DependenceAnalysis.h"
49 #include "llvm/Analysis/InstructionSimplify.h"
50 #include "llvm/Analysis/LoopInfo.h"
51 #include "llvm/Analysis/ScalarEvolution.h"
52 #include "llvm/IR/CFG.h"
53 #include "llvm/IR/Constants.h"
54 #include "llvm/IR/DataLayout.h"
55 #include "llvm/IR/Dominators.h"
56 #include "llvm/IR/Function.h"
57 #include "llvm/IR/Instructions.h"
58 #include "llvm/IR/IntrinsicInst.h"
59 #include "llvm/IR/LLVMContext.h"
60 #include "llvm/IR/Module.h"
61 #include "llvm/IR/Type.h"
62 #include "llvm/Support/Debug.h"
63 #include "llvm/Transforms/Utils/BasicBlockUtils.h"
64 #include "llvm/Transforms/Utils/Local.h"
65 #include "llvm/Transforms/Utils/LoopUtils.h"
68 #define DEBUG_TYPE "loop-simplify"
70 STATISTIC(NumInserted, "Number of pre-header or exit blocks inserted");
71 STATISTIC(NumNested , "Number of nested loops split out");
73 // If the block isn't already, move the new block to right after some 'outside
74 // block' block. This prevents the preheader from being placed inside the loop
75 // body, e.g. when the loop hasn't been rotated.
76 static void placeSplitBlockCarefully(BasicBlock *NewBB,
77 SmallVectorImpl<BasicBlock *> &SplitPreds,
79 // Check to see if NewBB is already well placed.
80 Function::iterator BBI = NewBB; --BBI;
81 for (unsigned i = 0, e = SplitPreds.size(); i != e; ++i) {
82 if (&*BBI == SplitPreds[i])
86 // If it isn't already after an outside block, move it after one. This is
87 // always good as it makes the uncond branch from the outside block into a
90 // Figure out *which* outside block to put this after. Prefer an outside
91 // block that neighbors a BB actually in the loop.
92 BasicBlock *FoundBB = nullptr;
93 for (unsigned i = 0, e = SplitPreds.size(); i != e; ++i) {
94 Function::iterator BBI = SplitPreds[i];
95 if (++BBI != NewBB->getParent()->end() &&
97 FoundBB = SplitPreds[i];
102 // If our heuristic for a *good* bb to place this after doesn't find
103 // anything, just pick something. It's likely better than leaving it within
106 FoundBB = SplitPreds[0];
107 NewBB->moveAfter(FoundBB);
110 /// InsertPreheaderForLoop - Once we discover that a loop doesn't have a
111 /// preheader, this method is called to insert one. This method has two phases:
112 /// preheader insertion and analysis updating.
114 BasicBlock *llvm::InsertPreheaderForLoop(Loop *L, Pass *PP) {
115 BasicBlock *Header = L->getHeader();
117 // Get analyses that we try to update.
118 auto *AA = PP->getAnalysisIfAvailable<AliasAnalysis>();
119 auto *DTWP = PP->getAnalysisIfAvailable<DominatorTreeWrapperPass>();
120 auto *DT = DTWP ? &DTWP->getDomTree() : nullptr;
121 auto *LIWP = PP->getAnalysisIfAvailable<LoopInfoWrapperPass>();
122 auto *LI = LIWP ? &LIWP->getLoopInfo() : nullptr;
123 bool PreserveLCSSA = PP->mustPreserveAnalysisID(LCSSAID);
125 // Compute the set of predecessors of the loop that are not in the loop.
126 SmallVector<BasicBlock*, 8> OutsideBlocks;
127 for (pred_iterator PI = pred_begin(Header), PE = pred_end(Header);
130 if (!L->contains(P)) { // Coming in from outside the loop?
131 // If the loop is branched to from an indirect branch, we won't
132 // be able to fully transform the loop, because it prohibits
134 if (isa<IndirectBrInst>(P->getTerminator())) return nullptr;
137 OutsideBlocks.push_back(P);
141 // Split out the loop pre-header.
142 BasicBlock *PreheaderBB;
143 PreheaderBB = SplitBlockPredecessors(Header, OutsideBlocks, ".preheader",
144 AA, DT, LI, PreserveLCSSA);
146 PreheaderBB->getTerminator()->setDebugLoc(
147 Header->getFirstNonPHI()->getDebugLoc());
148 DEBUG(dbgs() << "LoopSimplify: Creating pre-header "
149 << PreheaderBB->getName() << "\n");
151 // Make sure that NewBB is put someplace intelligent, which doesn't mess up
152 // code layout too horribly.
153 placeSplitBlockCarefully(PreheaderBB, OutsideBlocks, L);
158 /// \brief Ensure that the loop preheader dominates all exit blocks.
160 /// This method is used to split exit blocks that have predecessors outside of
162 static BasicBlock *rewriteLoopExitBlock(Loop *L, BasicBlock *Exit,
163 AliasAnalysis *AA, DominatorTree *DT,
164 LoopInfo *LI, Pass *PP) {
165 SmallVector<BasicBlock*, 8> LoopBlocks;
166 for (pred_iterator I = pred_begin(Exit), E = pred_end(Exit); I != E; ++I) {
168 if (L->contains(P)) {
169 // Don't do this if the loop is exited via an indirect branch.
170 if (isa<IndirectBrInst>(P->getTerminator())) return nullptr;
172 LoopBlocks.push_back(P);
176 assert(!LoopBlocks.empty() && "No edges coming in from outside the loop?");
177 BasicBlock *NewExitBB = nullptr;
179 bool PreserveLCSSA = PP->mustPreserveAnalysisID(LCSSAID);
181 NewExitBB = SplitBlockPredecessors(Exit, LoopBlocks, ".loopexit", AA, DT,
184 DEBUG(dbgs() << "LoopSimplify: Creating dedicated exit block "
185 << NewExitBB->getName() << "\n");
189 /// Add the specified block, and all of its predecessors, to the specified set,
190 /// if it's not already in there. Stop predecessor traversal when we reach
192 static void addBlockAndPredsToSet(BasicBlock *InputBB, BasicBlock *StopBlock,
193 std::set<BasicBlock*> &Blocks) {
194 SmallVector<BasicBlock *, 8> Worklist;
195 Worklist.push_back(InputBB);
197 BasicBlock *BB = Worklist.pop_back_val();
198 if (Blocks.insert(BB).second && BB != StopBlock)
199 // If BB is not already processed and it is not a stop block then
200 // insert its predecessor in the work list
201 for (pred_iterator I = pred_begin(BB), E = pred_end(BB); I != E; ++I) {
202 BasicBlock *WBB = *I;
203 Worklist.push_back(WBB);
205 } while (!Worklist.empty());
208 /// \brief The first part of loop-nestification is to find a PHI node that tells
209 /// us how to partition the loops.
210 static PHINode *findPHIToPartitionLoops(Loop *L, AliasAnalysis *AA,
212 AssumptionCache *AC) {
213 const DataLayout &DL = L->getHeader()->getModule()->getDataLayout();
214 for (BasicBlock::iterator I = L->getHeader()->begin(); isa<PHINode>(I); ) {
215 PHINode *PN = cast<PHINode>(I);
217 if (Value *V = SimplifyInstruction(PN, DL, nullptr, DT, AC)) {
218 // This is a degenerate PHI already, don't modify it!
219 PN->replaceAllUsesWith(V);
220 if (AA) AA->deleteValue(PN);
221 PN->eraseFromParent();
225 // Scan this PHI node looking for a use of the PHI node by itself.
226 for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
227 if (PN->getIncomingValue(i) == PN &&
228 L->contains(PN->getIncomingBlock(i)))
229 // We found something tasty to remove.
235 /// \brief If this loop has multiple backedges, try to pull one of them out into
238 /// This is important for code that looks like
243 /// br cond, Loop, Next
245 /// br cond2, Loop, Out
247 /// To identify this common case, we look at the PHI nodes in the header of the
248 /// loop. PHI nodes with unchanging values on one backedge correspond to values
249 /// that change in the "outer" loop, but not in the "inner" loop.
251 /// If we are able to separate out a loop, return the new outer loop that was
254 static Loop *separateNestedLoop(Loop *L, BasicBlock *Preheader,
255 AliasAnalysis *AA, DominatorTree *DT,
256 LoopInfo *LI, ScalarEvolution *SE, Pass *PP,
257 AssumptionCache *AC) {
258 // Don't try to separate loops without a preheader.
262 // The header is not a landing pad; preheader insertion should ensure this.
263 assert(!L->getHeader()->isLandingPad() &&
264 "Can't insert backedge to landing pad");
266 PHINode *PN = findPHIToPartitionLoops(L, AA, DT, AC);
267 if (!PN) return nullptr; // No known way to partition.
269 // Pull out all predecessors that have varying values in the loop. This
270 // handles the case when a PHI node has multiple instances of itself as
272 SmallVector<BasicBlock*, 8> OuterLoopPreds;
273 for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
274 if (PN->getIncomingValue(i) != PN ||
275 !L->contains(PN->getIncomingBlock(i))) {
276 // We can't split indirectbr edges.
277 if (isa<IndirectBrInst>(PN->getIncomingBlock(i)->getTerminator()))
279 OuterLoopPreds.push_back(PN->getIncomingBlock(i));
282 DEBUG(dbgs() << "LoopSimplify: Splitting out a new outer loop\n");
284 // If ScalarEvolution is around and knows anything about values in
285 // this loop, tell it to forget them, because we're about to
286 // substantially change it.
290 bool PreserveLCSSA = PP->mustPreserveAnalysisID(LCSSAID);
292 BasicBlock *Header = L->getHeader();
293 BasicBlock *NewBB = SplitBlockPredecessors(Header, OuterLoopPreds, ".outer",
294 AA, DT, LI, PreserveLCSSA);
296 // Make sure that NewBB is put someplace intelligent, which doesn't mess up
297 // code layout too horribly.
298 placeSplitBlockCarefully(NewBB, OuterLoopPreds, L);
300 // Create the new outer loop.
301 Loop *NewOuter = new Loop();
303 // Change the parent loop to use the outer loop as its child now.
304 if (Loop *Parent = L->getParentLoop())
305 Parent->replaceChildLoopWith(L, NewOuter);
307 LI->changeTopLevelLoop(L, NewOuter);
309 // L is now a subloop of our outer loop.
310 NewOuter->addChildLoop(L);
312 for (Loop::block_iterator I = L->block_begin(), E = L->block_end();
314 NewOuter->addBlockEntry(*I);
316 // Now reset the header in L, which had been moved by
317 // SplitBlockPredecessors for the outer loop.
318 L->moveToHeader(Header);
320 // Determine which blocks should stay in L and which should be moved out to
321 // the Outer loop now.
322 std::set<BasicBlock*> BlocksInL;
323 for (pred_iterator PI=pred_begin(Header), E = pred_end(Header); PI!=E; ++PI) {
325 if (DT->dominates(Header, P))
326 addBlockAndPredsToSet(P, Header, BlocksInL);
329 // Scan all of the loop children of L, moving them to OuterLoop if they are
330 // not part of the inner loop.
331 const std::vector<Loop*> &SubLoops = L->getSubLoops();
332 for (size_t I = 0; I != SubLoops.size(); )
333 if (BlocksInL.count(SubLoops[I]->getHeader()))
334 ++I; // Loop remains in L
336 NewOuter->addChildLoop(L->removeChildLoop(SubLoops.begin() + I));
338 // Now that we know which blocks are in L and which need to be moved to
339 // OuterLoop, move any blocks that need it.
340 for (unsigned i = 0; i != L->getBlocks().size(); ++i) {
341 BasicBlock *BB = L->getBlocks()[i];
342 if (!BlocksInL.count(BB)) {
343 // Move this block to the parent, updating the exit blocks sets
344 L->removeBlockFromLoop(BB);
346 LI->changeLoopFor(BB, NewOuter);
354 /// \brief This method is called when the specified loop has more than one
357 /// If this occurs, revector all of these backedges to target a new basic block
358 /// and have that block branch to the loop header. This ensures that loops
359 /// have exactly one backedge.
360 static BasicBlock *insertUniqueBackedgeBlock(Loop *L, BasicBlock *Preheader,
362 DominatorTree *DT, LoopInfo *LI) {
363 assert(L->getNumBackEdges() > 1 && "Must have > 1 backedge!");
365 // Get information about the loop
366 BasicBlock *Header = L->getHeader();
367 Function *F = Header->getParent();
369 // Unique backedge insertion currently depends on having a preheader.
373 // The header is not a landing pad; preheader insertion should ensure this.
374 assert(!Header->isLandingPad() && "Can't insert backedge to landing pad");
376 // Figure out which basic blocks contain back-edges to the loop header.
377 std::vector<BasicBlock*> BackedgeBlocks;
378 for (pred_iterator I = pred_begin(Header), E = pred_end(Header); I != E; ++I){
381 // Indirectbr edges cannot be split, so we must fail if we find one.
382 if (isa<IndirectBrInst>(P->getTerminator()))
385 if (P != Preheader) BackedgeBlocks.push_back(P);
388 // Create and insert the new backedge block...
389 BasicBlock *BEBlock = BasicBlock::Create(Header->getContext(),
390 Header->getName()+".backedge", F);
391 BranchInst *BETerminator = BranchInst::Create(Header, BEBlock);
393 DEBUG(dbgs() << "LoopSimplify: Inserting unique backedge block "
394 << BEBlock->getName() << "\n");
396 // Move the new backedge block to right after the last backedge block.
397 Function::iterator InsertPos = BackedgeBlocks.back(); ++InsertPos;
398 F->getBasicBlockList().splice(InsertPos, F->getBasicBlockList(), BEBlock);
400 // Now that the block has been inserted into the function, create PHI nodes in
401 // the backedge block which correspond to any PHI nodes in the header block.
402 for (BasicBlock::iterator I = Header->begin(); isa<PHINode>(I); ++I) {
403 PHINode *PN = cast<PHINode>(I);
404 PHINode *NewPN = PHINode::Create(PN->getType(), BackedgeBlocks.size(),
405 PN->getName()+".be", BETerminator);
406 if (AA) AA->copyValue(PN, NewPN);
408 // Loop over the PHI node, moving all entries except the one for the
409 // preheader over to the new PHI node.
410 unsigned PreheaderIdx = ~0U;
411 bool HasUniqueIncomingValue = true;
412 Value *UniqueValue = nullptr;
413 for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i) {
414 BasicBlock *IBB = PN->getIncomingBlock(i);
415 Value *IV = PN->getIncomingValue(i);
416 if (IBB == Preheader) {
419 NewPN->addIncoming(IV, IBB);
420 if (HasUniqueIncomingValue) {
423 else if (UniqueValue != IV)
424 HasUniqueIncomingValue = false;
429 // Delete all of the incoming values from the old PN except the preheader's
430 assert(PreheaderIdx != ~0U && "PHI has no preheader entry??");
431 if (PreheaderIdx != 0) {
432 PN->setIncomingValue(0, PN->getIncomingValue(PreheaderIdx));
433 PN->setIncomingBlock(0, PN->getIncomingBlock(PreheaderIdx));
435 // Nuke all entries except the zero'th.
436 for (unsigned i = 0, e = PN->getNumIncomingValues()-1; i != e; ++i)
437 PN->removeIncomingValue(e-i, false);
439 // Finally, add the newly constructed PHI node as the entry for the BEBlock.
440 PN->addIncoming(NewPN, BEBlock);
442 // As an optimization, if all incoming values in the new PhiNode (which is a
443 // subset of the incoming values of the old PHI node) have the same value,
444 // eliminate the PHI Node.
445 if (HasUniqueIncomingValue) {
446 NewPN->replaceAllUsesWith(UniqueValue);
447 if (AA) AA->deleteValue(NewPN);
448 BEBlock->getInstList().erase(NewPN);
452 // Now that all of the PHI nodes have been inserted and adjusted, modify the
453 // backedge blocks to just to the BEBlock instead of the header.
454 for (unsigned i = 0, e = BackedgeBlocks.size(); i != e; ++i) {
455 TerminatorInst *TI = BackedgeBlocks[i]->getTerminator();
456 for (unsigned Op = 0, e = TI->getNumSuccessors(); Op != e; ++Op)
457 if (TI->getSuccessor(Op) == Header)
458 TI->setSuccessor(Op, BEBlock);
461 //===--- Update all analyses which we must preserve now -----------------===//
463 // Update Loop Information - we know that this block is now in the current
464 // loop and all parent loops.
465 L->addBasicBlockToLoop(BEBlock, *LI);
467 // Update dominator information
468 DT->splitBlock(BEBlock);
473 /// \brief Simplify one loop and queue further loops for simplification.
475 /// FIXME: Currently this accepts both lots of analyses that it uses and a raw
476 /// Pass pointer. The Pass pointer is used by numerous utilities to update
477 /// specific analyses. Rather than a pass it would be much cleaner and more
478 /// explicit if they accepted the analysis directly and then updated it.
479 static bool simplifyOneLoop(Loop *L, SmallVectorImpl<Loop *> &Worklist,
480 AliasAnalysis *AA, DominatorTree *DT, LoopInfo *LI,
481 ScalarEvolution *SE, Pass *PP,
482 AssumptionCache *AC) {
483 bool Changed = false;
486 // Check to see that no blocks (other than the header) in this loop have
487 // predecessors that are not in the loop. This is not valid for natural
488 // loops, but can occur if the blocks are unreachable. Since they are
489 // unreachable we can just shamelessly delete those CFG edges!
490 for (Loop::block_iterator BB = L->block_begin(), E = L->block_end();
492 if (*BB == L->getHeader()) continue;
494 SmallPtrSet<BasicBlock*, 4> BadPreds;
495 for (pred_iterator PI = pred_begin(*BB),
496 PE = pred_end(*BB); PI != PE; ++PI) {
502 // Delete each unique out-of-loop (and thus dead) predecessor.
503 for (BasicBlock *P : BadPreds) {
505 DEBUG(dbgs() << "LoopSimplify: Deleting edge from dead predecessor "
506 << P->getName() << "\n");
508 // Inform each successor of each dead pred.
509 for (succ_iterator SI = succ_begin(P), SE = succ_end(P); SI != SE; ++SI)
510 (*SI)->removePredecessor(P);
511 // Zap the dead pred's terminator and replace it with unreachable.
512 TerminatorInst *TI = P->getTerminator();
513 TI->replaceAllUsesWith(UndefValue::get(TI->getType()));
514 P->getTerminator()->eraseFromParent();
515 new UnreachableInst(P->getContext(), P);
520 // If there are exiting blocks with branches on undef, resolve the undef in
521 // the direction which will exit the loop. This will help simplify loop
522 // trip count computations.
523 SmallVector<BasicBlock*, 8> ExitingBlocks;
524 L->getExitingBlocks(ExitingBlocks);
525 for (SmallVectorImpl<BasicBlock *>::iterator I = ExitingBlocks.begin(),
526 E = ExitingBlocks.end(); I != E; ++I)
527 if (BranchInst *BI = dyn_cast<BranchInst>((*I)->getTerminator()))
528 if (BI->isConditional()) {
529 if (UndefValue *Cond = dyn_cast<UndefValue>(BI->getCondition())) {
531 DEBUG(dbgs() << "LoopSimplify: Resolving \"br i1 undef\" to exit in "
532 << (*I)->getName() << "\n");
534 BI->setCondition(ConstantInt::get(Cond->getType(),
535 !L->contains(BI->getSuccessor(0))));
537 // This may make the loop analyzable, force SCEV recomputation.
545 // Does the loop already have a preheader? If so, don't insert one.
546 BasicBlock *Preheader = L->getLoopPreheader();
548 Preheader = InsertPreheaderForLoop(L, PP);
555 // Next, check to make sure that all exit nodes of the loop only have
556 // predecessors that are inside of the loop. This check guarantees that the
557 // loop preheader/header will dominate the exit blocks. If the exit block has
558 // predecessors from outside of the loop, split the edge now.
559 SmallVector<BasicBlock*, 8> ExitBlocks;
560 L->getExitBlocks(ExitBlocks);
562 SmallSetVector<BasicBlock *, 8> ExitBlockSet(ExitBlocks.begin(),
564 for (SmallSetVector<BasicBlock *, 8>::iterator I = ExitBlockSet.begin(),
565 E = ExitBlockSet.end(); I != E; ++I) {
566 BasicBlock *ExitBlock = *I;
567 for (pred_iterator PI = pred_begin(ExitBlock), PE = pred_end(ExitBlock);
569 // Must be exactly this loop: no subloops, parent loops, or non-loop preds
571 if (!L->contains(*PI)) {
572 if (rewriteLoopExitBlock(L, ExitBlock, AA, DT, LI, PP)) {
580 // If the header has more than two predecessors at this point (from the
581 // preheader and from multiple backedges), we must adjust the loop.
582 BasicBlock *LoopLatch = L->getLoopLatch();
584 // If this is really a nested loop, rip it out into a child loop. Don't do
585 // this for loops with a giant number of backedges, just factor them into a
586 // common backedge instead.
587 if (L->getNumBackEdges() < 8) {
589 separateNestedLoop(L, Preheader, AA, DT, LI, SE, PP, AC)) {
591 // Enqueue the outer loop as it should be processed next in our
592 // depth-first nest walk.
593 Worklist.push_back(OuterL);
595 // This is a big restructuring change, reprocess the whole loop.
597 // GCC doesn't tail recursion eliminate this.
598 // FIXME: It isn't clear we can't rely on LLVM to TRE this.
603 // If we either couldn't, or didn't want to, identify nesting of the loops,
604 // insert a new block that all backedges target, then make it jump to the
606 LoopLatch = insertUniqueBackedgeBlock(L, Preheader, AA, DT, LI);
613 const DataLayout &DL = L->getHeader()->getModule()->getDataLayout();
615 // Scan over the PHI nodes in the loop header. Since they now have only two
616 // incoming values (the loop is canonicalized), we may have simplified the PHI
617 // down to 'X = phi [X, Y]', which should be replaced with 'Y'.
619 for (BasicBlock::iterator I = L->getHeader()->begin();
620 (PN = dyn_cast<PHINode>(I++)); )
621 if (Value *V = SimplifyInstruction(PN, DL, nullptr, DT, AC)) {
622 if (AA) AA->deleteValue(PN);
623 if (SE) SE->forgetValue(PN);
624 PN->replaceAllUsesWith(V);
625 PN->eraseFromParent();
628 // If this loop has multiple exits and the exits all go to the same
629 // block, attempt to merge the exits. This helps several passes, such
630 // as LoopRotation, which do not support loops with multiple exits.
631 // SimplifyCFG also does this (and this code uses the same utility
632 // function), however this code is loop-aware, where SimplifyCFG is
633 // not. That gives it the advantage of being able to hoist
634 // loop-invariant instructions out of the way to open up more
635 // opportunities, and the disadvantage of having the responsibility
636 // to preserve dominator information.
637 bool UniqueExit = true;
638 if (!ExitBlocks.empty())
639 for (unsigned i = 1, e = ExitBlocks.size(); i != e; ++i)
640 if (ExitBlocks[i] != ExitBlocks[0]) {
645 for (unsigned i = 0, e = ExitingBlocks.size(); i != e; ++i) {
646 BasicBlock *ExitingBlock = ExitingBlocks[i];
647 if (!ExitingBlock->getSinglePredecessor()) continue;
648 BranchInst *BI = dyn_cast<BranchInst>(ExitingBlock->getTerminator());
649 if (!BI || !BI->isConditional()) continue;
650 CmpInst *CI = dyn_cast<CmpInst>(BI->getCondition());
651 if (!CI || CI->getParent() != ExitingBlock) continue;
653 // Attempt to hoist out all instructions except for the
654 // comparison and the branch.
655 bool AllInvariant = true;
656 bool AnyInvariant = false;
657 for (BasicBlock::iterator I = ExitingBlock->begin(); &*I != BI; ) {
658 Instruction *Inst = I++;
659 // Skip debug info intrinsics.
660 if (isa<DbgInfoIntrinsic>(Inst))
664 if (!L->makeLoopInvariant(Inst, AnyInvariant,
665 Preheader ? Preheader->getTerminator()
667 AllInvariant = false;
673 // The loop disposition of all SCEV expressions that depend on any
674 // hoisted values have also changed.
676 SE->forgetLoopDispositions(L);
678 if (!AllInvariant) continue;
680 // The block has now been cleared of all instructions except for
681 // a comparison and a conditional branch. SimplifyCFG may be able
683 if (!FoldBranchToCommonDest(BI))
686 // Success. The block is now dead, so remove it from the loop,
687 // update the dominator tree and delete it.
688 DEBUG(dbgs() << "LoopSimplify: Eliminating exiting block "
689 << ExitingBlock->getName() << "\n");
691 // Notify ScalarEvolution before deleting this block. Currently assume the
692 // parent loop doesn't change (spliting edges doesn't count). If blocks,
693 // CFG edges, or other values in the parent loop change, then we need call
694 // to forgetLoop() for the parent instead.
698 assert(pred_begin(ExitingBlock) == pred_end(ExitingBlock));
700 LI->removeBlock(ExitingBlock);
702 DomTreeNode *Node = DT->getNode(ExitingBlock);
703 const std::vector<DomTreeNodeBase<BasicBlock> *> &Children =
705 while (!Children.empty()) {
706 DomTreeNode *Child = Children.front();
707 DT->changeImmediateDominator(Child, Node->getIDom());
709 DT->eraseNode(ExitingBlock);
711 BI->getSuccessor(0)->removePredecessor(ExitingBlock);
712 BI->getSuccessor(1)->removePredecessor(ExitingBlock);
713 ExitingBlock->eraseFromParent();
720 bool llvm::simplifyLoop(Loop *L, DominatorTree *DT, LoopInfo *LI, Pass *PP,
721 AliasAnalysis *AA, ScalarEvolution *SE,
722 AssumptionCache *AC) {
723 bool Changed = false;
725 // Worklist maintains our depth-first queue of loops in this nest to process.
726 SmallVector<Loop *, 4> Worklist;
727 Worklist.push_back(L);
729 // Walk the worklist from front to back, pushing newly found sub loops onto
730 // the back. This will let us process loops from back to front in depth-first
731 // order. We can use this simple process because loops form a tree.
732 for (unsigned Idx = 0; Idx != Worklist.size(); ++Idx) {
733 Loop *L2 = Worklist[Idx];
734 Worklist.append(L2->begin(), L2->end());
737 while (!Worklist.empty())
738 Changed |= simplifyOneLoop(Worklist.pop_back_val(), Worklist, AA, DT, LI,
745 struct LoopSimplify : public FunctionPass {
746 static char ID; // Pass identification, replacement for typeid
747 LoopSimplify() : FunctionPass(ID) {
748 initializeLoopSimplifyPass(*PassRegistry::getPassRegistry());
751 // AA - If we have an alias analysis object to update, this is it, otherwise
759 bool runOnFunction(Function &F) override;
761 void getAnalysisUsage(AnalysisUsage &AU) const override {
762 AU.addRequired<AssumptionCacheTracker>();
764 // We need loop information to identify the loops...
765 AU.addRequired<DominatorTreeWrapperPass>();
766 AU.addPreserved<DominatorTreeWrapperPass>();
768 AU.addRequired<LoopInfoWrapperPass>();
769 AU.addPreserved<LoopInfoWrapperPass>();
771 AU.addPreserved<AliasAnalysis>();
772 AU.addPreserved<ScalarEvolution>();
773 AU.addPreserved<DependenceAnalysis>();
774 AU.addPreservedID(BreakCriticalEdgesID); // No critical edges added.
777 /// verifyAnalysis() - Verify LoopSimplifyForm's guarantees.
778 void verifyAnalysis() const override;
782 char LoopSimplify::ID = 0;
783 INITIALIZE_PASS_BEGIN(LoopSimplify, "loop-simplify",
784 "Canonicalize natural loops", false, false)
785 INITIALIZE_PASS_DEPENDENCY(AssumptionCacheTracker)
786 INITIALIZE_PASS_DEPENDENCY(DominatorTreeWrapperPass)
787 INITIALIZE_PASS_DEPENDENCY(LoopInfoWrapperPass)
788 INITIALIZE_PASS_END(LoopSimplify, "loop-simplify",
789 "Canonicalize natural loops", false, false)
791 // Publicly exposed interface to pass...
792 char &llvm::LoopSimplifyID = LoopSimplify::ID;
793 Pass *llvm::createLoopSimplifyPass() { return new LoopSimplify(); }
795 /// runOnFunction - Run down all loops in the CFG (recursively, but we could do
796 /// it in any convenient order) inserting preheaders...
798 bool LoopSimplify::runOnFunction(Function &F) {
799 bool Changed = false;
800 AA = getAnalysisIfAvailable<AliasAnalysis>();
801 LI = &getAnalysis<LoopInfoWrapperPass>().getLoopInfo();
802 DT = &getAnalysis<DominatorTreeWrapperPass>().getDomTree();
803 SE = getAnalysisIfAvailable<ScalarEvolution>();
804 AC = &getAnalysis<AssumptionCacheTracker>().getAssumptionCache(F);
806 // Simplify each loop nest in the function.
807 for (LoopInfo::iterator I = LI->begin(), E = LI->end(); I != E; ++I)
808 Changed |= simplifyLoop(*I, DT, LI, this, AA, SE, AC);
813 // FIXME: Restore this code when we re-enable verification in verifyAnalysis
816 static void verifyLoop(Loop *L) {
818 for (Loop::iterator I = L->begin(), E = L->end(); I != E; ++I)
821 // It used to be possible to just assert L->isLoopSimplifyForm(), however
822 // with the introduction of indirectbr, there are now cases where it's
823 // not possible to transform a loop as necessary. We can at least check
824 // that there is an indirectbr near any time there's trouble.
826 // Indirectbr can interfere with preheader and unique backedge insertion.
827 if (!L->getLoopPreheader() || !L->getLoopLatch()) {
828 bool HasIndBrPred = false;
829 for (pred_iterator PI = pred_begin(L->getHeader()),
830 PE = pred_end(L->getHeader()); PI != PE; ++PI)
831 if (isa<IndirectBrInst>((*PI)->getTerminator())) {
835 assert(HasIndBrPred &&
836 "LoopSimplify has no excuse for missing loop header info!");
840 // Indirectbr can interfere with exit block canonicalization.
841 if (!L->hasDedicatedExits()) {
842 bool HasIndBrExiting = false;
843 SmallVector<BasicBlock*, 8> ExitingBlocks;
844 L->getExitingBlocks(ExitingBlocks);
845 for (unsigned i = 0, e = ExitingBlocks.size(); i != e; ++i) {
846 if (isa<IndirectBrInst>((ExitingBlocks[i])->getTerminator())) {
847 HasIndBrExiting = true;
852 assert(HasIndBrExiting &&
853 "LoopSimplify has no excuse for missing exit block info!");
854 (void)HasIndBrExiting;
859 void LoopSimplify::verifyAnalysis() const {
860 // FIXME: This routine is being called mid-way through the loop pass manager
861 // as loop passes destroy this analysis. That's actually fine, but we have no
862 // way of expressing that here. Once all of the passes that destroy this are
863 // hoisted out of the loop pass manager we can add back verification here.
865 for (LoopInfo::iterator I = LI->begin(), E = LI->end(); I != E; ++I)