2 * net/dsa/mv88e6060.c - Driver for Marvell 88e6060 switch chips
3 * Copyright (c) 2008-2009 Marvell Semiconductor
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
11 #include <linux/list.h>
12 #include <linux/netdevice.h>
13 #include <linux/phy.h>
16 #define REG_PORT(p) (8 + (p))
17 #define REG_GLOBAL 0x0f
19 static int reg_read(struct dsa_switch *ds, int addr, int reg)
21 return mdiobus_read(ds->master_mii_bus, ds->pd->sw_addr + addr, reg);
24 #define REG_READ(addr, reg) \
28 __ret = reg_read(ds, addr, reg); \
35 static int reg_write(struct dsa_switch *ds, int addr, int reg, u16 val)
37 return mdiobus_write(ds->master_mii_bus, ds->pd->sw_addr + addr,
41 #define REG_WRITE(addr, reg, val) \
45 __ret = reg_write(ds, addr, reg, val); \
50 static char *mv88e6060_probe(struct mii_bus *bus, int sw_addr)
54 ret = mdiobus_read(bus, sw_addr + REG_PORT(0), 0x03);
58 return "Marvell 88E6060";
64 static int mv88e6060_switch_reset(struct dsa_switch *ds)
70 * Set all ports to the disabled state.
72 for (i = 0; i < 6; i++) {
73 ret = REG_READ(REG_PORT(i), 0x04);
74 REG_WRITE(REG_PORT(i), 0x04, ret & 0xfffc);
78 * Wait for transmit queues to drain.
85 REG_WRITE(REG_GLOBAL, 0x0a, 0xa130);
88 * Wait up to one second for reset to complete.
90 for (i = 0; i < 1000; i++) {
91 ret = REG_READ(REG_GLOBAL, 0x00);
92 if ((ret & 0x8000) == 0x0000)
103 static int mv88e6060_setup_global(struct dsa_switch *ds)
106 * Disable discarding of frames with excessive collisions,
107 * set the maximum frame size to 1536 bytes, and mask all
110 REG_WRITE(REG_GLOBAL, 0x04, 0x0800);
113 * Enable automatic address learning, set the address
114 * database size to 1024 entries, and set the default aging
117 REG_WRITE(REG_GLOBAL, 0x0a, 0x2130);
122 static int mv88e6060_setup_port(struct dsa_switch *ds, int p)
124 int addr = REG_PORT(p);
127 * Do not force flow control, disable Ingress and Egress
128 * Header tagging, disable VLAN tunneling, and set the port
129 * state to Forwarding. Additionally, if this is the CPU
130 * port, enable Ingress and Egress Trailer tagging mode.
132 REG_WRITE(addr, 0x04, dsa_is_cpu_port(ds, p) ? 0x4103 : 0x0003);
135 * Port based VLAN map: give each port its own address
136 * database, allow the CPU port to talk to each of the 'real'
137 * ports, and allow each of the 'real' ports to only talk to
140 REG_WRITE(addr, 0x06,
142 (dsa_is_cpu_port(ds, p) ?
144 (1 << ds->dst->cpu_port)));
147 * Port Association Vector: when learning source addresses
148 * of packets, add the address to the address database using
149 * a port bitmap that has only the bit for this port set and
150 * the other bits clear.
152 REG_WRITE(addr, 0x0b, 1 << p);
157 static int mv88e6060_setup(struct dsa_switch *ds)
162 ret = mv88e6060_switch_reset(ds);
166 /* @@@ initialise atu */
168 ret = mv88e6060_setup_global(ds);
172 for (i = 0; i < 6; i++) {
173 ret = mv88e6060_setup_port(ds, i);
181 static int mv88e6060_set_addr(struct dsa_switch *ds, u8 *addr)
183 REG_WRITE(REG_GLOBAL, 0x01, (addr[0] << 8) | addr[1]);
184 REG_WRITE(REG_GLOBAL, 0x02, (addr[2] << 8) | addr[3]);
185 REG_WRITE(REG_GLOBAL, 0x03, (addr[4] << 8) | addr[5]);
190 static int mv88e6060_port_to_phy_addr(int port)
192 if (port >= 0 && port <= 5)
197 static int mv88e6060_phy_read(struct dsa_switch *ds, int port, int regnum)
201 addr = mv88e6060_port_to_phy_addr(port);
205 return reg_read(ds, addr, regnum);
209 mv88e6060_phy_write(struct dsa_switch *ds, int port, int regnum, u16 val)
213 addr = mv88e6060_port_to_phy_addr(port);
217 return reg_write(ds, addr, regnum, val);
220 static void mv88e6060_poll_link(struct dsa_switch *ds)
224 for (i = 0; i < DSA_MAX_PORTS; i++) {
225 struct net_device *dev;
226 int uninitialized_var(port_status);
237 if (dev->flags & IFF_UP) {
238 port_status = reg_read(ds, REG_PORT(i), 0x00);
242 link = !!(port_status & 0x1000);
246 if (netif_carrier_ok(dev)) {
247 printk(KERN_INFO "%s: link down\n", dev->name);
248 netif_carrier_off(dev);
253 speed = (port_status & 0x0100) ? 100 : 10;
254 duplex = (port_status & 0x0200) ? 1 : 0;
255 fc = ((port_status & 0xc000) == 0xc000) ? 1 : 0;
257 if (!netif_carrier_ok(dev)) {
258 printk(KERN_INFO "%s: link up, %d Mb/s, %s duplex, "
259 "flow control %sabled\n", dev->name,
260 speed, duplex ? "full" : "half",
262 netif_carrier_on(dev);
267 static struct dsa_switch_driver mv88e6060_switch_driver = {
268 .tag_protocol = htons(ETH_P_TRAILER),
269 .probe = mv88e6060_probe,
270 .setup = mv88e6060_setup,
271 .set_addr = mv88e6060_set_addr,
272 .phy_read = mv88e6060_phy_read,
273 .phy_write = mv88e6060_phy_write,
274 .poll_link = mv88e6060_poll_link,
277 static int __init mv88e6060_init(void)
279 register_switch_driver(&mv88e6060_switch_driver);
282 module_init(mv88e6060_init);
284 static void __exit mv88e6060_cleanup(void)
286 unregister_switch_driver(&mv88e6060_switch_driver);
288 module_exit(mv88e6060_cleanup);