2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
9 * Copyright (C) 2015 Intel Deutschland GmbH
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 #include <linux/delay.h>
17 #include <linux/if_ether.h>
18 #include <linux/skbuff.h>
19 #include <linux/if_arp.h>
20 #include <linux/etherdevice.h>
21 #include <linux/moduleparam.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/pm_qos.h>
24 #include <linux/crc32.h>
25 #include <linux/slab.h>
26 #include <linux/export.h>
27 #include <net/mac80211.h>
28 #include <asm/unaligned.h>
30 #include "ieee80211_i.h"
31 #include "driver-ops.h"
35 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
36 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
37 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
38 #define IEEE80211_AUTH_MAX_TRIES 3
39 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
40 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
41 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
42 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
43 #define IEEE80211_ASSOC_MAX_TRIES 3
45 static int max_nullfunc_tries = 2;
46 module_param(max_nullfunc_tries, int, 0644);
47 MODULE_PARM_DESC(max_nullfunc_tries,
48 "Maximum nullfunc tx tries before disconnecting (reason 4).");
50 static int max_probe_tries = 5;
51 module_param(max_probe_tries, int, 0644);
52 MODULE_PARM_DESC(max_probe_tries,
53 "Maximum probe tries before disconnecting (reason 4).");
56 * Beacon loss timeout is calculated as N frames times the
57 * advertised beacon interval. This may need to be somewhat
58 * higher than what hardware might detect to account for
59 * delays in the host processing frames. But since we also
60 * probe on beacon miss before declaring the connection lost
61 * default to what we want.
63 static int beacon_loss_count = 7;
64 module_param(beacon_loss_count, int, 0644);
65 MODULE_PARM_DESC(beacon_loss_count,
66 "Number of beacon intervals before we decide beacon was lost.");
69 * Time the connection can be idle before we probe
70 * it to see if we can still talk to the AP.
72 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
74 * Time we wait for a probe response after sending
75 * a probe request because of beacon loss or for
76 * checking the connection still works.
78 static int probe_wait_ms = 500;
79 module_param(probe_wait_ms, int, 0644);
80 MODULE_PARM_DESC(probe_wait_ms,
81 "Maximum time(ms) to wait for probe response"
82 " before disconnecting (reason 4).");
85 * How many Beacon frames need to have been used in average signal strength
86 * before starting to indicate signal change events.
88 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
91 * We can have multiple work items (and connection probing)
92 * scheduling this timer, but we need to take care to only
93 * reschedule it when it should fire _earlier_ than it was
94 * asked for before, or if it's not pending right now. This
95 * function ensures that. Note that it then is required to
96 * run this function for all timeouts after the first one
97 * has happened -- the work that runs from this timer will
100 static void run_again(struct ieee80211_sub_if_data *sdata,
101 unsigned long timeout)
103 sdata_assert_lock(sdata);
105 if (!timer_pending(&sdata->u.mgd.timer) ||
106 time_before(timeout, sdata->u.mgd.timer.expires))
107 mod_timer(&sdata->u.mgd.timer, timeout);
110 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
112 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
115 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
118 mod_timer(&sdata->u.mgd.bcn_mon_timer,
119 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
122 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
124 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
126 if (unlikely(!sdata->u.mgd.associated))
129 ifmgd->probe_send_count = 0;
131 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
134 mod_timer(&sdata->u.mgd.conn_mon_timer,
135 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
138 static int ecw2cw(int ecw)
140 return (1 << ecw) - 1;
144 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
145 struct ieee80211_supported_band *sband,
146 struct ieee80211_channel *channel,
147 const struct ieee80211_ht_cap *ht_cap,
148 const struct ieee80211_ht_operation *ht_oper,
149 const struct ieee80211_vht_operation *vht_oper,
150 struct cfg80211_chan_def *chandef, bool tracking)
152 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
153 struct cfg80211_chan_def vht_chandef;
154 struct ieee80211_sta_ht_cap sta_ht_cap;
157 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
158 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
160 chandef->chan = channel;
161 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
162 chandef->center_freq1 = channel->center_freq;
163 chandef->center_freq2 = 0;
165 if (!ht_cap || !ht_oper || !sta_ht_cap.ht_supported) {
166 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
170 chandef->width = NL80211_CHAN_WIDTH_20;
172 if (!(ht_cap->cap_info &
173 cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40))) {
174 ret = IEEE80211_STA_DISABLE_40MHZ;
175 vht_chandef = *chandef;
179 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
181 /* check that channel matches the right operating channel */
182 if (!tracking && channel->center_freq != ht_cfreq) {
184 * It's possible that some APs are confused here;
185 * Netgear WNDR3700 sometimes reports 4 higher than
186 * the actual channel in association responses, but
187 * since we look at probe response/beacon data here
191 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
192 channel->center_freq, ht_cfreq,
193 ht_oper->primary_chan, channel->band);
194 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
198 /* check 40 MHz support, if we have it */
199 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
200 switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
201 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
202 chandef->width = NL80211_CHAN_WIDTH_40;
203 chandef->center_freq1 += 10;
205 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
206 chandef->width = NL80211_CHAN_WIDTH_40;
207 chandef->center_freq1 -= 10;
211 /* 40 MHz (and 80 MHz) must be supported for VHT */
212 ret = IEEE80211_STA_DISABLE_VHT;
213 /* also mark 40 MHz disabled */
214 ret |= IEEE80211_STA_DISABLE_40MHZ;
218 if (!vht_oper || !sband->vht_cap.vht_supported) {
219 ret = IEEE80211_STA_DISABLE_VHT;
223 vht_chandef.chan = channel;
224 vht_chandef.center_freq1 =
225 ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
227 vht_chandef.center_freq2 = 0;
229 switch (vht_oper->chan_width) {
230 case IEEE80211_VHT_CHANWIDTH_USE_HT:
231 vht_chandef.width = chandef->width;
232 vht_chandef.center_freq1 = chandef->center_freq1;
234 case IEEE80211_VHT_CHANWIDTH_80MHZ:
235 vht_chandef.width = NL80211_CHAN_WIDTH_80;
237 case IEEE80211_VHT_CHANWIDTH_160MHZ:
238 vht_chandef.width = NL80211_CHAN_WIDTH_160;
240 case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
241 vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
242 vht_chandef.center_freq2 =
243 ieee80211_channel_to_frequency(
244 vht_oper->center_freq_seg2_idx,
248 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
250 "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
251 vht_oper->chan_width);
252 ret = IEEE80211_STA_DISABLE_VHT;
256 if (!cfg80211_chandef_valid(&vht_chandef)) {
257 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
259 "AP VHT information is invalid, disable VHT\n");
260 ret = IEEE80211_STA_DISABLE_VHT;
264 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
269 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
270 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
272 "AP VHT information doesn't match HT, disable VHT\n");
273 ret = IEEE80211_STA_DISABLE_VHT;
277 *chandef = vht_chandef;
283 * When tracking the current AP, don't do any further checks if the
284 * new chandef is identical to the one we're currently using for the
285 * connection. This keeps us from playing ping-pong with regulatory,
286 * without it the following can happen (for example):
287 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
288 * - AP advertises regdom US
289 * - CRDA loads regdom US with 80 MHz prohibited (old database)
290 * - the code below detects an unsupported channel, downgrades, and
291 * we disconnect from the AP in the caller
292 * - disconnect causes CRDA to reload world regdomain and the game
294 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
296 * It seems possible that there are still scenarios with CSA or real
297 * bandwidth changes where a this could happen, but those cases are
298 * less common and wouldn't completely prevent using the AP.
301 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
304 /* don't print the message below for VHT mismatch if VHT is disabled */
305 if (ret & IEEE80211_STA_DISABLE_VHT)
306 vht_chandef = *chandef;
309 * Ignore the DISABLED flag when we're already connected and only
310 * tracking the APs beacon for bandwidth changes - otherwise we
311 * might get disconnected here if we connect to an AP, update our
312 * regulatory information based on the AP's country IE and the
313 * information we have is wrong/outdated and disables the channel
314 * that we're actually using for the connection to the AP.
316 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
318 IEEE80211_CHAN_DISABLED)) {
319 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
320 ret = IEEE80211_STA_DISABLE_HT |
321 IEEE80211_STA_DISABLE_VHT;
325 ret |= ieee80211_chandef_downgrade(chandef);
328 if (chandef->width != vht_chandef.width && !tracking)
330 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
332 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
336 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
337 struct sta_info *sta,
338 const struct ieee80211_ht_cap *ht_cap,
339 const struct ieee80211_ht_operation *ht_oper,
340 const struct ieee80211_vht_operation *vht_oper,
341 const u8 *bssid, u32 *changed)
343 struct ieee80211_local *local = sdata->local;
344 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
345 struct ieee80211_supported_band *sband;
346 struct ieee80211_channel *chan;
347 struct cfg80211_chan_def chandef;
350 enum ieee80211_sta_rx_bandwidth new_sta_bw;
353 /* if HT was/is disabled, don't track any bandwidth changes */
354 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
357 /* don't check VHT if we associated as non-VHT station */
358 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
361 if (WARN_ON_ONCE(!sta))
365 * if bss configuration changed store the new one -
366 * this may be applicable even if channel is identical
368 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
369 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
370 *changed |= BSS_CHANGED_HT;
371 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
374 chan = sdata->vif.bss_conf.chandef.chan;
375 sband = local->hw.wiphy->bands[chan->band];
377 /* calculate new channel (type) based on HT/VHT operation IEs */
378 flags = ieee80211_determine_chantype(sdata, sband, chan,
379 ht_cap, ht_oper, vht_oper,
383 * Downgrade the new channel if we associated with restricted
384 * capabilities. For example, if we associated as a 20 MHz STA
385 * to a 40 MHz AP (due to regulatory, capabilities or config
386 * reasons) then switching to a 40 MHz channel now won't do us
387 * any good -- we couldn't use it with the AP.
389 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
390 chandef.width == NL80211_CHAN_WIDTH_80P80)
391 flags |= ieee80211_chandef_downgrade(&chandef);
392 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
393 chandef.width == NL80211_CHAN_WIDTH_160)
394 flags |= ieee80211_chandef_downgrade(&chandef);
395 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
396 chandef.width > NL80211_CHAN_WIDTH_20)
397 flags |= ieee80211_chandef_downgrade(&chandef);
399 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
403 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
404 ifmgd->bssid, chandef.chan->center_freq, chandef.width,
405 chandef.center_freq1, chandef.center_freq2);
407 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
408 IEEE80211_STA_DISABLE_VHT |
409 IEEE80211_STA_DISABLE_40MHZ |
410 IEEE80211_STA_DISABLE_80P80MHZ |
411 IEEE80211_STA_DISABLE_160MHZ)) ||
412 !cfg80211_chandef_valid(&chandef)) {
414 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
419 switch (chandef.width) {
420 case NL80211_CHAN_WIDTH_20_NOHT:
421 case NL80211_CHAN_WIDTH_20:
422 new_sta_bw = IEEE80211_STA_RX_BW_20;
424 case NL80211_CHAN_WIDTH_40:
425 new_sta_bw = IEEE80211_STA_RX_BW_40;
427 case NL80211_CHAN_WIDTH_80:
428 new_sta_bw = IEEE80211_STA_RX_BW_80;
430 case NL80211_CHAN_WIDTH_80P80:
431 case NL80211_CHAN_WIDTH_160:
432 new_sta_bw = IEEE80211_STA_RX_BW_160;
438 if (new_sta_bw > sta->cur_max_bandwidth)
439 new_sta_bw = sta->cur_max_bandwidth;
441 if (new_sta_bw < sta->sta.bandwidth) {
442 sta->sta.bandwidth = new_sta_bw;
443 rate_control_rate_update(local, sband, sta,
444 IEEE80211_RC_BW_CHANGED);
447 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
450 "AP %pM changed bandwidth to incompatible one - disconnect\n",
455 if (new_sta_bw > sta->sta.bandwidth) {
456 sta->sta.bandwidth = new_sta_bw;
457 rate_control_rate_update(local, sband, sta,
458 IEEE80211_RC_BW_CHANGED);
464 /* frame sending functions */
466 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
467 struct sk_buff *skb, u8 ap_ht_param,
468 struct ieee80211_supported_band *sband,
469 struct ieee80211_channel *channel,
470 enum ieee80211_smps_mode smps)
473 u32 flags = channel->flags;
475 struct ieee80211_sta_ht_cap ht_cap;
477 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
479 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
480 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
482 /* determine capability flags */
485 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
486 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
487 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
488 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
489 cap &= ~IEEE80211_HT_CAP_SGI_40;
492 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
493 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
494 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
495 cap &= ~IEEE80211_HT_CAP_SGI_40;
501 * If 40 MHz was disabled associate as though we weren't
502 * capable of 40 MHz -- some broken APs will never fall
503 * back to trying to transmit in 20 MHz.
505 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
506 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
507 cap &= ~IEEE80211_HT_CAP_SGI_40;
510 /* set SM PS mode properly */
511 cap &= ~IEEE80211_HT_CAP_SM_PS;
513 case IEEE80211_SMPS_AUTOMATIC:
514 case IEEE80211_SMPS_NUM_MODES:
516 case IEEE80211_SMPS_OFF:
517 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
518 IEEE80211_HT_CAP_SM_PS_SHIFT;
520 case IEEE80211_SMPS_STATIC:
521 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
522 IEEE80211_HT_CAP_SM_PS_SHIFT;
524 case IEEE80211_SMPS_DYNAMIC:
525 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
526 IEEE80211_HT_CAP_SM_PS_SHIFT;
530 /* reserve and fill IE */
531 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
532 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
535 /* This function determines vht capability flags for the association
537 * Note - the function may set the owner of the MU-MIMO capability
539 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
541 struct ieee80211_supported_band *sband,
542 struct ieee80211_vht_cap *ap_vht_cap)
544 struct ieee80211_local *local = sdata->local;
547 struct ieee80211_sta_vht_cap vht_cap;
548 u32 mask, ap_bf_sts, our_bf_sts;
550 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
552 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
553 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
555 /* determine capability flags */
558 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
559 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
561 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
562 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
563 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
564 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
567 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
568 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
569 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
573 * Some APs apparently get confused if our capabilities are better
574 * than theirs, so restrict what we advertise in the assoc request.
576 if (!(ap_vht_cap->vht_cap_info &
577 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
578 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
579 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
580 else if (!(ap_vht_cap->vht_cap_info &
581 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
582 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
585 * If some other vif is using the MU-MIMO capablity we cannot associate
586 * using MU-MIMO - this will lead to contradictions in the group-id
588 * Ownership is defined since association request, in order to avoid
589 * simultaneous associations with MU-MIMO.
591 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
592 bool disable_mu_mimo = false;
593 struct ieee80211_sub_if_data *other;
595 list_for_each_entry_rcu(other, &local->interfaces, list) {
596 if (other->flags & IEEE80211_SDATA_MU_MIMO_OWNER) {
597 disable_mu_mimo = true;
602 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
604 sdata->flags |= IEEE80211_SDATA_MU_MIMO_OWNER;
607 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
609 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
610 our_bf_sts = cap & mask;
612 if (ap_bf_sts < our_bf_sts) {
617 /* reserve and fill IE */
618 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
619 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
622 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
624 struct ieee80211_local *local = sdata->local;
625 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
626 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
628 struct ieee80211_mgmt *mgmt;
630 size_t offset = 0, noffset;
631 int i, count, rates_len, supp_rates_len, shift;
633 struct ieee80211_supported_band *sband;
634 struct ieee80211_chanctx_conf *chanctx_conf;
635 struct ieee80211_channel *chan;
636 u32 rate_flags, rates = 0;
638 sdata_assert_lock(sdata);
641 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
642 if (WARN_ON(!chanctx_conf)) {
646 chan = chanctx_conf->def.chan;
647 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
649 sband = local->hw.wiphy->bands[chan->band];
650 shift = ieee80211_vif_get_shift(&sdata->vif);
652 if (assoc_data->supp_rates_len) {
654 * Get all rates supported by the device and the AP as
655 * some APs don't like getting a superset of their rates
656 * in the association request (e.g. D-Link DAP 1353 in
659 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
660 assoc_data->supp_rates,
661 assoc_data->supp_rates_len,
665 * In case AP not provide any supported rates information
666 * before association, we send information element(s) with
667 * all rates that we support.
670 for (i = 0; i < sband->n_bitrates; i++) {
671 if ((rate_flags & sband->bitrates[i].flags)
679 skb = alloc_skb(local->hw.extra_tx_headroom +
680 sizeof(*mgmt) + /* bit too much but doesn't matter */
681 2 + assoc_data->ssid_len + /* SSID */
682 4 + rates_len + /* (extended) rates */
683 4 + /* power capability */
684 2 + 2 * sband->n_channels + /* supported channels */
685 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
686 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
687 assoc_data->ie_len + /* extra IEs */
693 skb_reserve(skb, local->hw.extra_tx_headroom);
695 capab = WLAN_CAPABILITY_ESS;
697 if (sband->band == IEEE80211_BAND_2GHZ) {
698 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
699 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
702 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
703 capab |= WLAN_CAPABILITY_PRIVACY;
705 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
706 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
707 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
709 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
710 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
712 mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
714 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
715 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
716 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
718 if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
720 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
721 IEEE80211_STYPE_REASSOC_REQ);
722 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
723 mgmt->u.reassoc_req.listen_interval =
724 cpu_to_le16(local->hw.conf.listen_interval);
725 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
729 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
730 IEEE80211_STYPE_ASSOC_REQ);
731 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
732 mgmt->u.assoc_req.listen_interval =
733 cpu_to_le16(local->hw.conf.listen_interval);
737 pos = skb_put(skb, 2 + assoc_data->ssid_len);
738 *pos++ = WLAN_EID_SSID;
739 *pos++ = assoc_data->ssid_len;
740 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
742 /* add all rates which were marked to be used above */
743 supp_rates_len = rates_len;
744 if (supp_rates_len > 8)
747 pos = skb_put(skb, supp_rates_len + 2);
748 *pos++ = WLAN_EID_SUPP_RATES;
749 *pos++ = supp_rates_len;
752 for (i = 0; i < sband->n_bitrates; i++) {
753 if (BIT(i) & rates) {
754 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
762 if (rates_len > count) {
763 pos = skb_put(skb, rates_len - count + 2);
764 *pos++ = WLAN_EID_EXT_SUPP_RATES;
765 *pos++ = rates_len - count;
767 for (i++; i < sband->n_bitrates; i++) {
768 if (BIT(i) & rates) {
770 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
777 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
778 capab & WLAN_CAPABILITY_RADIO_MEASURE) {
779 pos = skb_put(skb, 4);
780 *pos++ = WLAN_EID_PWR_CAPABILITY;
782 *pos++ = 0; /* min tx power */
784 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
787 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
788 /* TODO: get this in reg domain format */
789 pos = skb_put(skb, 2 * sband->n_channels + 2);
790 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
791 *pos++ = 2 * sband->n_channels;
792 for (i = 0; i < sband->n_channels; i++) {
793 *pos++ = ieee80211_frequency_to_channel(
794 sband->channels[i].center_freq);
795 *pos++ = 1; /* one channel in the subband*/
799 /* if present, add any custom IEs that go before HT */
800 if (assoc_data->ie_len) {
801 static const u8 before_ht[] = {
804 WLAN_EID_EXT_SUPP_RATES,
805 WLAN_EID_PWR_CAPABILITY,
806 WLAN_EID_SUPPORTED_CHANNELS,
809 WLAN_EID_RRM_ENABLED_CAPABILITIES,
810 WLAN_EID_MOBILITY_DOMAIN,
811 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
812 WLAN_EID_RIC_DATA, /* reassoc only */
813 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
815 static const u8 after_ric[] = {
816 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
817 WLAN_EID_HT_CAPABILITY,
818 WLAN_EID_BSS_COEX_2040,
819 WLAN_EID_EXT_CAPABILITY,
820 WLAN_EID_QOS_TRAFFIC_CAPA,
821 WLAN_EID_TIM_BCAST_REQ,
822 WLAN_EID_INTERWORKING,
823 /* 60GHz doesn't happen right now */
824 WLAN_EID_VHT_CAPABILITY,
825 WLAN_EID_OPMODE_NOTIF,
828 noffset = ieee80211_ie_split_ric(assoc_data->ie,
831 ARRAY_SIZE(before_ht),
833 ARRAY_SIZE(after_ric),
835 pos = skb_put(skb, noffset - offset);
836 memcpy(pos, assoc_data->ie + offset, noffset - offset);
840 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
841 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
842 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
844 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
845 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
846 sband, chan, sdata->smps_mode);
848 /* if present, add any custom IEs that go before VHT */
849 if (assoc_data->ie_len) {
850 static const u8 before_vht[] = {
853 WLAN_EID_EXT_SUPP_RATES,
854 WLAN_EID_PWR_CAPABILITY,
855 WLAN_EID_SUPPORTED_CHANNELS,
858 WLAN_EID_RRM_ENABLED_CAPABILITIES,
859 WLAN_EID_MOBILITY_DOMAIN,
860 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
861 WLAN_EID_HT_CAPABILITY,
862 WLAN_EID_BSS_COEX_2040,
863 WLAN_EID_EXT_CAPABILITY,
864 WLAN_EID_QOS_TRAFFIC_CAPA,
865 WLAN_EID_TIM_BCAST_REQ,
866 WLAN_EID_INTERWORKING,
869 /* RIC already taken above, so no need to handle here anymore */
870 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
871 before_vht, ARRAY_SIZE(before_vht),
873 pos = skb_put(skb, noffset - offset);
874 memcpy(pos, assoc_data->ie + offset, noffset - offset);
878 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
879 ieee80211_add_vht_ie(sdata, skb, sband,
880 &assoc_data->ap_vht_cap);
882 /* if present, add any custom non-vendor IEs that go after HT */
883 if (assoc_data->ie_len) {
884 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
887 pos = skb_put(skb, noffset - offset);
888 memcpy(pos, assoc_data->ie + offset, noffset - offset);
892 if (assoc_data->wmm) {
893 if (assoc_data->uapsd) {
894 qos_info = ifmgd->uapsd_queues;
895 qos_info |= (ifmgd->uapsd_max_sp_len <<
896 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
901 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
904 /* add any remaining custom (i.e. vendor specific here) IEs */
905 if (assoc_data->ie_len) {
906 noffset = assoc_data->ie_len;
907 pos = skb_put(skb, noffset - offset);
908 memcpy(pos, assoc_data->ie + offset, noffset - offset);
911 drv_mgd_prepare_tx(local, sdata);
913 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
914 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
915 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
916 IEEE80211_TX_INTFL_MLME_CONN_TX;
917 ieee80211_tx_skb(sdata, skb);
920 void ieee80211_send_pspoll(struct ieee80211_local *local,
921 struct ieee80211_sub_if_data *sdata)
923 struct ieee80211_pspoll *pspoll;
926 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
930 pspoll = (struct ieee80211_pspoll *) skb->data;
931 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
933 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
934 ieee80211_tx_skb(sdata, skb);
937 void ieee80211_send_nullfunc(struct ieee80211_local *local,
938 struct ieee80211_sub_if_data *sdata,
942 struct ieee80211_hdr_3addr *nullfunc;
943 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
945 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
949 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
951 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
953 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
954 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
956 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
957 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
959 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
960 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
962 ieee80211_tx_skb(sdata, skb);
965 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
966 struct ieee80211_sub_if_data *sdata)
969 struct ieee80211_hdr *nullfunc;
972 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
975 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
979 skb_reserve(skb, local->hw.extra_tx_headroom);
981 nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
982 memset(nullfunc, 0, 30);
983 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
984 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
985 nullfunc->frame_control = fc;
986 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
987 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
988 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
989 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
991 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
992 ieee80211_tx_skb(sdata, skb);
995 /* spectrum management related things */
996 static void ieee80211_chswitch_work(struct work_struct *work)
998 struct ieee80211_sub_if_data *sdata =
999 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
1000 struct ieee80211_local *local = sdata->local;
1001 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1004 if (!ieee80211_sdata_running(sdata))
1008 mutex_lock(&local->mtx);
1009 mutex_lock(&local->chanctx_mtx);
1011 if (!ifmgd->associated)
1014 if (!sdata->vif.csa_active)
1018 * using reservation isn't immediate as it may be deferred until later
1019 * with multi-vif. once reservation is complete it will re-schedule the
1020 * work with no reserved_chanctx so verify chandef to check if it
1021 * completed successfully
1024 if (sdata->reserved_chanctx) {
1026 * with multi-vif csa driver may call ieee80211_csa_finish()
1027 * many times while waiting for other interfaces to use their
1030 if (sdata->reserved_ready)
1033 ret = ieee80211_vif_use_reserved_context(sdata);
1036 "failed to use reserved channel context, disconnecting (err=%d)\n",
1038 ieee80211_queue_work(&sdata->local->hw,
1039 &ifmgd->csa_connection_drop_work);
1046 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1047 &sdata->csa_chandef)) {
1049 "failed to finalize channel switch, disconnecting\n");
1050 ieee80211_queue_work(&sdata->local->hw,
1051 &ifmgd->csa_connection_drop_work);
1055 /* XXX: shouldn't really modify cfg80211-owned data! */
1056 ifmgd->associated->channel = sdata->csa_chandef.chan;
1058 ifmgd->csa_waiting_bcn = true;
1060 ieee80211_sta_reset_beacon_monitor(sdata);
1061 ieee80211_sta_reset_conn_monitor(sdata);
1064 mutex_unlock(&local->chanctx_mtx);
1065 mutex_unlock(&local->mtx);
1066 sdata_unlock(sdata);
1069 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1071 struct ieee80211_local *local = sdata->local;
1072 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1075 sdata_assert_lock(sdata);
1077 WARN_ON(!sdata->vif.csa_active);
1079 if (sdata->csa_block_tx) {
1080 ieee80211_wake_vif_queues(local, sdata,
1081 IEEE80211_QUEUE_STOP_REASON_CSA);
1082 sdata->csa_block_tx = false;
1085 sdata->vif.csa_active = false;
1086 ifmgd->csa_waiting_bcn = false;
1088 ret = drv_post_channel_switch(sdata);
1091 "driver post channel switch failed, disconnecting\n");
1092 ieee80211_queue_work(&local->hw,
1093 &ifmgd->csa_connection_drop_work);
1097 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1100 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1102 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1103 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1105 trace_api_chswitch_done(sdata, success);
1108 "driver channel switch failed, disconnecting\n");
1109 ieee80211_queue_work(&sdata->local->hw,
1110 &ifmgd->csa_connection_drop_work);
1112 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1115 EXPORT_SYMBOL(ieee80211_chswitch_done);
1117 static void ieee80211_chswitch_timer(unsigned long data)
1119 struct ieee80211_sub_if_data *sdata =
1120 (struct ieee80211_sub_if_data *) data;
1122 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1126 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1127 u64 timestamp, u32 device_timestamp,
1128 struct ieee802_11_elems *elems,
1131 struct ieee80211_local *local = sdata->local;
1132 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1133 struct cfg80211_bss *cbss = ifmgd->associated;
1134 struct ieee80211_chanctx_conf *conf;
1135 struct ieee80211_chanctx *chanctx;
1136 enum ieee80211_band current_band;
1137 struct ieee80211_csa_ie csa_ie;
1138 struct ieee80211_channel_switch ch_switch;
1141 sdata_assert_lock(sdata);
1146 if (local->scanning)
1149 /* disregard subsequent announcements if we are already processing */
1150 if (sdata->vif.csa_active)
1153 current_band = cbss->channel->band;
1154 memset(&csa_ie, 0, sizeof(csa_ie));
1155 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1157 ifmgd->associated->bssid, &csa_ie);
1159 ieee80211_queue_work(&local->hw,
1160 &ifmgd->csa_connection_drop_work);
1164 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1165 IEEE80211_CHAN_DISABLED)) {
1167 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1168 ifmgd->associated->bssid,
1169 csa_ie.chandef.chan->center_freq,
1170 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1171 csa_ie.chandef.center_freq2);
1172 ieee80211_queue_work(&local->hw,
1173 &ifmgd->csa_connection_drop_work);
1177 if (cfg80211_chandef_identical(&csa_ie.chandef,
1178 &sdata->vif.bss_conf.chandef)) {
1179 if (ifmgd->csa_ignored_same_chan)
1182 "AP %pM tries to chanswitch to same channel, ignore\n",
1183 ifmgd->associated->bssid);
1184 ifmgd->csa_ignored_same_chan = true;
1189 * Drop all TDLS peers - either we disconnect or move to a different
1190 * channel from this point on. There's no telling what our peer will do.
1191 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1192 * have an incompatible wider chandef.
1194 ieee80211_teardown_tdls_peers(sdata);
1196 mutex_lock(&local->mtx);
1197 mutex_lock(&local->chanctx_mtx);
1198 conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1199 lockdep_is_held(&local->chanctx_mtx));
1202 "no channel context assigned to vif?, disconnecting\n");
1203 goto drop_connection;
1206 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1208 if (local->use_chanctx &&
1209 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1211 "driver doesn't support chan-switch with channel contexts\n");
1212 goto drop_connection;
1215 ch_switch.timestamp = timestamp;
1216 ch_switch.device_timestamp = device_timestamp;
1217 ch_switch.block_tx = csa_ie.mode;
1218 ch_switch.chandef = csa_ie.chandef;
1219 ch_switch.count = csa_ie.count;
1221 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1223 "preparing for channel switch failed, disconnecting\n");
1224 goto drop_connection;
1227 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1228 chanctx->mode, false);
1231 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1233 goto drop_connection;
1235 mutex_unlock(&local->chanctx_mtx);
1237 sdata->vif.csa_active = true;
1238 sdata->csa_chandef = csa_ie.chandef;
1239 sdata->csa_block_tx = csa_ie.mode;
1240 ifmgd->csa_ignored_same_chan = false;
1242 if (sdata->csa_block_tx)
1243 ieee80211_stop_vif_queues(local, sdata,
1244 IEEE80211_QUEUE_STOP_REASON_CSA);
1245 mutex_unlock(&local->mtx);
1247 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1250 if (local->ops->channel_switch) {
1251 /* use driver's channel switch callback */
1252 drv_channel_switch(local, sdata, &ch_switch);
1256 /* channel switch handled in software */
1257 if (csa_ie.count <= 1)
1258 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1260 mod_timer(&ifmgd->chswitch_timer,
1261 TU_TO_EXP_TIME((csa_ie.count - 1) *
1262 cbss->beacon_interval));
1265 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1266 mutex_unlock(&local->chanctx_mtx);
1267 mutex_unlock(&local->mtx);
1271 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1272 struct ieee80211_channel *channel,
1273 const u8 *country_ie, u8 country_ie_len,
1274 const u8 *pwr_constr_elem,
1275 int *chan_pwr, int *pwr_reduction)
1277 struct ieee80211_country_ie_triplet *triplet;
1278 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1279 int i, chan_increment;
1280 bool have_chan_pwr = false;
1283 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1286 triplet = (void *)(country_ie + 3);
1287 country_ie_len -= 3;
1289 switch (channel->band) {
1293 case IEEE80211_BAND_2GHZ:
1294 case IEEE80211_BAND_60GHZ:
1297 case IEEE80211_BAND_5GHZ:
1303 while (country_ie_len >= 3) {
1304 u8 first_channel = triplet->chans.first_channel;
1306 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1309 for (i = 0; i < triplet->chans.num_channels; i++) {
1310 if (first_channel + i * chan_increment == chan) {
1311 have_chan_pwr = true;
1312 *chan_pwr = triplet->chans.max_power;
1321 country_ie_len -= 3;
1324 if (have_chan_pwr && pwr_constr_elem)
1325 *pwr_reduction = *pwr_constr_elem;
1329 return have_chan_pwr;
1332 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1333 struct ieee80211_channel *channel,
1334 const u8 *cisco_dtpc_ie,
1337 /* From practical testing, the first data byte of the DTPC element
1338 * seems to contain the requested dBm level, and the CLI on Cisco
1339 * APs clearly state the range is -127 to 127 dBm, which indicates
1340 * a signed byte, although it seemingly never actually goes negative.
1341 * The other byte seems to always be zero.
1343 *pwr_level = (__s8)cisco_dtpc_ie[4];
1346 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1347 struct ieee80211_channel *channel,
1348 struct ieee80211_mgmt *mgmt,
1349 const u8 *country_ie, u8 country_ie_len,
1350 const u8 *pwr_constr_ie,
1351 const u8 *cisco_dtpc_ie)
1353 bool has_80211h_pwr = false, has_cisco_pwr = false;
1354 int chan_pwr = 0, pwr_reduction_80211h = 0;
1355 int pwr_level_cisco, pwr_level_80211h;
1357 __le16 capab = mgmt->u.probe_resp.capab_info;
1360 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1361 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1362 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1363 sdata, channel, country_ie, country_ie_len,
1364 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1366 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1369 if (cisco_dtpc_ie) {
1370 ieee80211_find_cisco_dtpc(
1371 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1372 has_cisco_pwr = true;
1375 if (!has_80211h_pwr && !has_cisco_pwr)
1378 /* If we have both 802.11h and Cisco DTPC, apply both limits
1379 * by picking the smallest of the two power levels advertised.
1381 if (has_80211h_pwr &&
1382 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1384 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1385 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1386 sdata->u.mgd.bssid);
1387 new_ap_level = pwr_level_80211h;
1388 } else { /* has_cisco_pwr is always true here. */
1390 "Limiting TX power to %d dBm as advertised by %pM\n",
1391 pwr_level_cisco, sdata->u.mgd.bssid);
1392 new_ap_level = pwr_level_cisco;
1395 if (sdata->ap_power_level == new_ap_level)
1398 sdata->ap_power_level = new_ap_level;
1399 if (__ieee80211_recalc_txpower(sdata))
1400 return BSS_CHANGED_TXPOWER;
1405 static void ieee80211_enable_ps(struct ieee80211_local *local,
1406 struct ieee80211_sub_if_data *sdata)
1408 struct ieee80211_conf *conf = &local->hw.conf;
1411 * If we are scanning right now then the parameters will
1412 * take effect when scan finishes.
1414 if (local->scanning)
1417 if (conf->dynamic_ps_timeout > 0 &&
1418 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
1419 mod_timer(&local->dynamic_ps_timer, jiffies +
1420 msecs_to_jiffies(conf->dynamic_ps_timeout));
1422 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
1423 ieee80211_send_nullfunc(local, sdata, 1);
1425 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1426 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1429 conf->flags |= IEEE80211_CONF_PS;
1430 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1434 static void ieee80211_change_ps(struct ieee80211_local *local)
1436 struct ieee80211_conf *conf = &local->hw.conf;
1438 if (local->ps_sdata) {
1439 ieee80211_enable_ps(local, local->ps_sdata);
1440 } else if (conf->flags & IEEE80211_CONF_PS) {
1441 conf->flags &= ~IEEE80211_CONF_PS;
1442 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1443 del_timer_sync(&local->dynamic_ps_timer);
1444 cancel_work_sync(&local->dynamic_ps_enable_work);
1448 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1450 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1451 struct sta_info *sta = NULL;
1452 bool authorized = false;
1454 if (!mgd->powersave)
1460 if (!mgd->associated)
1463 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1466 if (!mgd->have_beacon)
1470 sta = sta_info_get(sdata, mgd->bssid);
1472 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1478 /* need to hold RTNL or interface lock */
1479 void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
1481 struct ieee80211_sub_if_data *sdata, *found = NULL;
1485 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) {
1486 local->ps_sdata = NULL;
1490 list_for_each_entry(sdata, &local->interfaces, list) {
1491 if (!ieee80211_sdata_running(sdata))
1493 if (sdata->vif.type == NL80211_IFTYPE_AP) {
1494 /* If an AP vif is found, then disable PS
1495 * by setting the count to zero thereby setting
1501 if (sdata->vif.type != NL80211_IFTYPE_STATION)
1507 if (count == 1 && ieee80211_powersave_allowed(found)) {
1511 latency = pm_qos_request(PM_QOS_NETWORK_LATENCY);
1513 beaconint_us = ieee80211_tu_to_usec(
1514 found->vif.bss_conf.beacon_int);
1516 timeout = local->dynamic_ps_forced_timeout;
1519 * Go to full PSM if the user configures a very low
1520 * latency requirement.
1521 * The 2000 second value is there for compatibility
1522 * until the PM_QOS_NETWORK_LATENCY is configured
1525 if (latency > (1900 * USEC_PER_MSEC) &&
1526 latency != (2000 * USEC_PER_SEC))
1531 local->hw.conf.dynamic_ps_timeout = timeout;
1533 if (beaconint_us > latency) {
1534 local->ps_sdata = NULL;
1537 u8 dtimper = found->u.mgd.dtim_period;
1539 /* If the TIM IE is invalid, pretend the value is 1 */
1542 else if (dtimper > 1)
1543 maxslp = min_t(int, dtimper,
1544 latency / beaconint_us);
1546 local->hw.conf.max_sleep_period = maxslp;
1547 local->hw.conf.ps_dtim_period = dtimper;
1548 local->ps_sdata = found;
1551 local->ps_sdata = NULL;
1554 ieee80211_change_ps(local);
1557 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1559 bool ps_allowed = ieee80211_powersave_allowed(sdata);
1561 if (sdata->vif.bss_conf.ps != ps_allowed) {
1562 sdata->vif.bss_conf.ps = ps_allowed;
1563 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1567 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1569 struct ieee80211_local *local =
1570 container_of(work, struct ieee80211_local,
1571 dynamic_ps_disable_work);
1573 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1574 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1575 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1578 ieee80211_wake_queues_by_reason(&local->hw,
1579 IEEE80211_MAX_QUEUE_MAP,
1580 IEEE80211_QUEUE_STOP_REASON_PS,
1584 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1586 struct ieee80211_local *local =
1587 container_of(work, struct ieee80211_local,
1588 dynamic_ps_enable_work);
1589 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1590 struct ieee80211_if_managed *ifmgd;
1591 unsigned long flags;
1594 /* can only happen when PS was just disabled anyway */
1598 ifmgd = &sdata->u.mgd;
1600 if (local->hw.conf.flags & IEEE80211_CONF_PS)
1603 if (local->hw.conf.dynamic_ps_timeout > 0) {
1604 /* don't enter PS if TX frames are pending */
1605 if (drv_tx_frames_pending(local)) {
1606 mod_timer(&local->dynamic_ps_timer, jiffies +
1608 local->hw.conf.dynamic_ps_timeout));
1613 * transmission can be stopped by others which leads to
1614 * dynamic_ps_timer expiry. Postpone the ps timer if it
1615 * is not the actual idle state.
1617 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1618 for (q = 0; q < local->hw.queues; q++) {
1619 if (local->queue_stop_reasons[q]) {
1620 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1622 mod_timer(&local->dynamic_ps_timer, jiffies +
1624 local->hw.conf.dynamic_ps_timeout));
1628 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1631 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1632 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1633 if (drv_tx_frames_pending(local)) {
1634 mod_timer(&local->dynamic_ps_timer, jiffies +
1636 local->hw.conf.dynamic_ps_timeout));
1638 ieee80211_send_nullfunc(local, sdata, 1);
1639 /* Flush to get the tx status of nullfunc frame */
1640 ieee80211_flush_queues(local, sdata, false);
1644 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
1645 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
1646 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1647 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1648 local->hw.conf.flags |= IEEE80211_CONF_PS;
1649 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1653 void ieee80211_dynamic_ps_timer(unsigned long data)
1655 struct ieee80211_local *local = (void *) data;
1657 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1660 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1662 struct delayed_work *delayed_work =
1663 container_of(work, struct delayed_work, work);
1664 struct ieee80211_sub_if_data *sdata =
1665 container_of(delayed_work, struct ieee80211_sub_if_data,
1666 dfs_cac_timer_work);
1667 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1669 mutex_lock(&sdata->local->mtx);
1670 if (sdata->wdev.cac_started) {
1671 ieee80211_vif_release_channel(sdata);
1672 cfg80211_cac_event(sdata->dev, &chandef,
1673 NL80211_RADAR_CAC_FINISHED,
1676 mutex_unlock(&sdata->local->mtx);
1680 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1682 struct ieee80211_local *local = sdata->local;
1683 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1687 if (local->hw.queues < IEEE80211_NUM_ACS)
1690 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1691 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1693 unsigned long now = jiffies;
1695 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1696 tx_tspec->admitted_time &&
1697 time_after(now, tx_tspec->time_slice_start + HZ)) {
1698 tx_tspec->consumed_tx_time = 0;
1699 tx_tspec->time_slice_start = now;
1701 if (tx_tspec->downgraded)
1703 TX_TSPEC_ACTION_STOP_DOWNGRADE;
1706 switch (tx_tspec->action) {
1707 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1708 /* take the original parameters */
1709 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1711 "failed to set TX queue parameters for queue %d\n",
1713 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1714 tx_tspec->downgraded = false;
1717 case TX_TSPEC_ACTION_DOWNGRADE:
1718 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1719 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1723 /* downgrade next lower non-ACM AC */
1724 for (non_acm_ac = ac + 1;
1725 non_acm_ac < IEEE80211_NUM_ACS;
1727 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1729 /* The loop will result in using BK even if it requires
1730 * admission control, such configuration makes no sense
1731 * and we have to transmit somehow - the AC selection
1732 * does the same thing.
1734 if (drv_conf_tx(local, sdata, ac,
1735 &sdata->tx_conf[non_acm_ac]))
1737 "failed to set TX queue parameters for queue %d\n",
1739 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1741 schedule_delayed_work(&ifmgd->tx_tspec_wk,
1742 tx_tspec->time_slice_start + HZ - now + 1);
1744 case TX_TSPEC_ACTION_NONE:
1753 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1755 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
1756 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
1759 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
1761 struct ieee80211_sub_if_data *sdata;
1763 sdata = container_of(work, struct ieee80211_sub_if_data,
1764 u.mgd.tx_tspec_wk.work);
1765 ieee80211_sta_handle_tspec_ac_params(sdata);
1769 static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
1770 struct ieee80211_sub_if_data *sdata,
1771 const u8 *wmm_param, size_t wmm_param_len)
1773 struct ieee80211_tx_queue_params params;
1774 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1778 u8 uapsd_queues = 0;
1780 if (!local->ops->conf_tx)
1783 if (local->hw.queues < IEEE80211_NUM_ACS)
1789 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
1792 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
1793 uapsd_queues = ifmgd->uapsd_queues;
1795 count = wmm_param[6] & 0x0f;
1796 if (count == ifmgd->wmm_last_param_set)
1798 ifmgd->wmm_last_param_set = count;
1800 pos = wmm_param + 8;
1801 left = wmm_param_len - 8;
1803 memset(¶ms, 0, sizeof(params));
1806 for (; left >= 4; left -= 4, pos += 4) {
1807 int aci = (pos[0] >> 5) & 0x03;
1808 int acm = (pos[0] >> 4) & 0x01;
1816 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
1817 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
1823 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
1824 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
1830 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
1831 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
1838 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
1839 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
1844 params.aifs = pos[0] & 0x0f;
1845 params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
1846 params.cw_min = ecw2cw(pos[1] & 0x0f);
1847 params.txop = get_unaligned_le16(pos + 2);
1849 params.uapsd = uapsd;
1852 "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
1854 params.aifs, params.cw_min, params.cw_max,
1855 params.txop, params.uapsd,
1856 ifmgd->tx_tspec[queue].downgraded);
1857 sdata->tx_conf[queue] = params;
1858 if (!ifmgd->tx_tspec[queue].downgraded &&
1859 drv_conf_tx(local, sdata, queue, ¶ms))
1861 "failed to set TX queue parameters for queue %d\n",
1865 /* enable WMM or activate new settings */
1866 sdata->vif.bss_conf.qos = true;
1870 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1872 lockdep_assert_held(&sdata->local->mtx);
1874 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
1875 ieee80211_run_deferred_scan(sdata->local);
1878 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1880 mutex_lock(&sdata->local->mtx);
1881 __ieee80211_stop_poll(sdata);
1882 mutex_unlock(&sdata->local->mtx);
1885 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
1886 u16 capab, bool erp_valid, u8 erp)
1888 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1890 bool use_protection;
1891 bool use_short_preamble;
1892 bool use_short_slot;
1895 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
1896 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
1898 use_protection = false;
1899 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
1902 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
1903 if (ieee80211_get_sdata_band(sdata) == IEEE80211_BAND_5GHZ)
1904 use_short_slot = true;
1906 if (use_protection != bss_conf->use_cts_prot) {
1907 bss_conf->use_cts_prot = use_protection;
1908 changed |= BSS_CHANGED_ERP_CTS_PROT;
1911 if (use_short_preamble != bss_conf->use_short_preamble) {
1912 bss_conf->use_short_preamble = use_short_preamble;
1913 changed |= BSS_CHANGED_ERP_PREAMBLE;
1916 if (use_short_slot != bss_conf->use_short_slot) {
1917 bss_conf->use_short_slot = use_short_slot;
1918 changed |= BSS_CHANGED_ERP_SLOT;
1924 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
1925 struct cfg80211_bss *cbss,
1926 u32 bss_info_changed)
1928 struct ieee80211_bss *bss = (void *)cbss->priv;
1929 struct ieee80211_local *local = sdata->local;
1930 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1932 bss_info_changed |= BSS_CHANGED_ASSOC;
1933 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
1934 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
1936 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
1937 beacon_loss_count * bss_conf->beacon_int));
1939 sdata->u.mgd.associated = cbss;
1940 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
1942 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
1944 if (sdata->vif.p2p) {
1945 const struct cfg80211_bss_ies *ies;
1948 ies = rcu_dereference(cbss->ies);
1952 ret = cfg80211_get_p2p_attr(
1953 ies->data, ies->len,
1954 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
1955 (u8 *) &bss_conf->p2p_noa_attr,
1956 sizeof(bss_conf->p2p_noa_attr));
1958 sdata->u.mgd.p2p_noa_index =
1959 bss_conf->p2p_noa_attr.index;
1960 bss_info_changed |= BSS_CHANGED_P2P_PS;
1966 /* just to be sure */
1967 ieee80211_stop_poll(sdata);
1969 ieee80211_led_assoc(local, 1);
1971 if (sdata->u.mgd.have_beacon) {
1973 * If the AP is buggy we may get here with no DTIM period
1974 * known, so assume it's 1 which is the only safe assumption
1975 * in that case, although if the TIM IE is broken powersave
1976 * probably just won't work at all.
1978 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
1979 bss_conf->beacon_rate = bss->beacon_rate;
1980 bss_info_changed |= BSS_CHANGED_BEACON_INFO;
1982 bss_conf->beacon_rate = NULL;
1983 bss_conf->dtim_period = 0;
1986 bss_conf->assoc = 1;
1988 /* Tell the driver to monitor connection quality (if supported) */
1989 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
1990 bss_conf->cqm_rssi_thold)
1991 bss_info_changed |= BSS_CHANGED_CQM;
1993 /* Enable ARP filtering */
1994 if (bss_conf->arp_addr_cnt)
1995 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
1997 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
1999 mutex_lock(&local->iflist_mtx);
2000 ieee80211_recalc_ps(local, -1);
2001 mutex_unlock(&local->iflist_mtx);
2003 ieee80211_recalc_smps(sdata);
2004 ieee80211_recalc_ps_vif(sdata);
2006 netif_carrier_on(sdata->dev);
2009 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
2010 u16 stype, u16 reason, bool tx,
2013 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2014 struct ieee80211_local *local = sdata->local;
2017 sdata_assert_lock(sdata);
2019 if (WARN_ON_ONCE(tx && !frame_buf))
2022 if (WARN_ON(!ifmgd->associated))
2025 ieee80211_stop_poll(sdata);
2027 ifmgd->associated = NULL;
2028 netif_carrier_off(sdata->dev);
2031 * if we want to get out of ps before disassoc (why?) we have
2032 * to do it before sending disassoc, as otherwise the null-packet
2035 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2036 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2037 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2039 local->ps_sdata = NULL;
2041 /* disable per-vif ps */
2042 ieee80211_recalc_ps_vif(sdata);
2044 /* make sure ongoing transmission finishes */
2048 * drop any frame before deauth/disassoc, this can be data or
2049 * management frame. Since we are disconnecting, we should not
2050 * insist sending these frames which can take time and delay
2051 * the disconnection and possible the roaming.
2054 ieee80211_flush_queues(local, sdata, true);
2056 /* deauthenticate/disassociate now */
2057 if (tx || frame_buf)
2058 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
2059 reason, tx, frame_buf);
2061 /* flush out frame - make sure the deauth was actually sent */
2063 ieee80211_flush_queues(local, sdata, false);
2065 /* clear bssid only after building the needed mgmt frames */
2066 eth_zero_addr(ifmgd->bssid);
2068 /* remove AP and TDLS peers */
2069 sta_info_flush(sdata);
2071 /* finally reset all BSS / config parameters */
2072 changed |= ieee80211_reset_erp_info(sdata);
2074 ieee80211_led_assoc(local, 0);
2075 changed |= BSS_CHANGED_ASSOC;
2076 sdata->vif.bss_conf.assoc = false;
2078 ifmgd->p2p_noa_index = -1;
2079 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2080 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2082 /* on the next assoc, re-program HT/VHT parameters */
2083 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2084 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2085 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2086 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2087 sdata->flags &= ~IEEE80211_SDATA_MU_MIMO_OWNER;
2089 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2091 del_timer_sync(&local->dynamic_ps_timer);
2092 cancel_work_sync(&local->dynamic_ps_enable_work);
2094 /* Disable ARP filtering */
2095 if (sdata->vif.bss_conf.arp_addr_cnt)
2096 changed |= BSS_CHANGED_ARP_FILTER;
2098 sdata->vif.bss_conf.qos = false;
2099 changed |= BSS_CHANGED_QOS;
2101 /* The BSSID (not really interesting) and HT changed */
2102 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2103 ieee80211_bss_info_change_notify(sdata, changed);
2105 /* disassociated - set to defaults now */
2106 ieee80211_set_wmm_default(sdata, false);
2108 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2109 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2110 del_timer_sync(&sdata->u.mgd.timer);
2111 del_timer_sync(&sdata->u.mgd.chswitch_timer);
2113 sdata->vif.bss_conf.dtim_period = 0;
2114 sdata->vif.bss_conf.beacon_rate = NULL;
2116 ifmgd->have_beacon = false;
2119 mutex_lock(&local->mtx);
2120 ieee80211_vif_release_channel(sdata);
2122 sdata->vif.csa_active = false;
2123 ifmgd->csa_waiting_bcn = false;
2124 ifmgd->csa_ignored_same_chan = false;
2125 if (sdata->csa_block_tx) {
2126 ieee80211_wake_vif_queues(local, sdata,
2127 IEEE80211_QUEUE_STOP_REASON_CSA);
2128 sdata->csa_block_tx = false;
2130 mutex_unlock(&local->mtx);
2132 /* existing TX TSPEC sessions no longer exist */
2133 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2134 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2136 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2139 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
2140 struct ieee80211_hdr *hdr)
2143 * We can postpone the mgd.timer whenever receiving unicast frames
2144 * from AP because we know that the connection is working both ways
2145 * at that time. But multicast frames (and hence also beacons) must
2146 * be ignored here, because we need to trigger the timer during
2147 * data idle periods for sending the periodic probe request to the
2148 * AP we're connected to.
2150 if (is_multicast_ether_addr(hdr->addr1))
2153 ieee80211_sta_reset_conn_monitor(sdata);
2156 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2158 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2159 struct ieee80211_local *local = sdata->local;
2161 mutex_lock(&local->mtx);
2162 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2165 __ieee80211_stop_poll(sdata);
2167 mutex_lock(&local->iflist_mtx);
2168 ieee80211_recalc_ps(local, -1);
2169 mutex_unlock(&local->iflist_mtx);
2171 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
2175 * We've received a probe response, but are not sure whether
2176 * we have or will be receiving any beacons or data, so let's
2177 * schedule the timers again, just in case.
2179 ieee80211_sta_reset_beacon_monitor(sdata);
2181 mod_timer(&ifmgd->conn_mon_timer,
2182 round_jiffies_up(jiffies +
2183 IEEE80211_CONNECTION_IDLE_TIME));
2185 mutex_unlock(&local->mtx);
2188 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2189 struct ieee80211_hdr *hdr,
2192 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2193 u16 tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
2194 int ac = ieee80211_ac_from_tid(tid);
2195 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2196 unsigned long now = jiffies;
2198 if (likely(!tx_tspec->admitted_time))
2201 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2202 tx_tspec->consumed_tx_time = 0;
2203 tx_tspec->time_slice_start = now;
2205 if (tx_tspec->downgraded) {
2206 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2207 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2211 if (tx_tspec->downgraded)
2214 tx_tspec->consumed_tx_time += tx_time;
2216 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2217 tx_tspec->downgraded = true;
2218 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2219 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2223 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2224 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2226 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2228 if (!ieee80211_is_data(hdr->frame_control))
2231 if (ieee80211_is_nullfunc(hdr->frame_control) &&
2232 sdata->u.mgd.probe_send_count > 0) {
2234 ieee80211_sta_reset_conn_monitor(sdata);
2236 sdata->u.mgd.nullfunc_failed = true;
2237 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2242 ieee80211_sta_reset_conn_monitor(sdata);
2245 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2247 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2249 u8 *dst = ifmgd->associated->bssid;
2250 u8 unicast_limit = max(1, max_probe_tries - 3);
2253 * Try sending broadcast probe requests for the last three
2254 * probe requests after the first ones failed since some
2255 * buggy APs only support broadcast probe requests.
2257 if (ifmgd->probe_send_count >= unicast_limit)
2261 * When the hardware reports an accurate Tx ACK status, it's
2262 * better to send a nullfunc frame instead of a probe request,
2263 * as it will kick us off the AP quickly if we aren't associated
2264 * anymore. The timeout will be reset if the frame is ACKed by
2267 ifmgd->probe_send_count++;
2269 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
2270 ifmgd->nullfunc_failed = false;
2271 ieee80211_send_nullfunc(sdata->local, sdata, 0);
2276 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2277 if (WARN_ON_ONCE(ssid == NULL))
2282 ieee80211_send_probe_req(sdata, sdata->vif.addr, dst,
2283 ssid + 2, ssid_len, NULL,
2284 0, (u32) -1, true, 0,
2285 ifmgd->associated->channel, false);
2289 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2290 run_again(sdata, ifmgd->probe_timeout);
2293 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2296 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2297 bool already = false;
2299 if (!ieee80211_sdata_running(sdata))
2304 if (!ifmgd->associated)
2307 mutex_lock(&sdata->local->mtx);
2309 if (sdata->local->tmp_channel || sdata->local->scanning) {
2310 mutex_unlock(&sdata->local->mtx);
2315 mlme_dbg_ratelimited(sdata,
2316 "detected beacon loss from AP (missed %d beacons) - probing\n",
2319 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2323 * The driver/our work has already reported this event or the
2324 * connection monitoring has kicked in and we have already sent
2325 * a probe request. Or maybe the AP died and the driver keeps
2326 * reporting until we disassociate...
2328 * In either case we have to ignore the current call to this
2329 * function (except for setting the correct probe reason bit)
2330 * because otherwise we would reset the timer every time and
2331 * never check whether we received a probe response!
2333 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2336 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2338 mutex_unlock(&sdata->local->mtx);
2343 mutex_lock(&sdata->local->iflist_mtx);
2344 ieee80211_recalc_ps(sdata->local, -1);
2345 mutex_unlock(&sdata->local->iflist_mtx);
2347 ifmgd->probe_send_count = 0;
2348 ieee80211_mgd_probe_ap_send(sdata);
2350 sdata_unlock(sdata);
2353 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2354 struct ieee80211_vif *vif)
2356 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2357 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2358 struct cfg80211_bss *cbss;
2359 struct sk_buff *skb;
2363 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2366 sdata_assert_lock(sdata);
2368 if (ifmgd->associated)
2369 cbss = ifmgd->associated;
2370 else if (ifmgd->auth_data)
2371 cbss = ifmgd->auth_data->bss;
2372 else if (ifmgd->assoc_data)
2373 cbss = ifmgd->assoc_data->bss;
2378 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2379 if (WARN_ON_ONCE(ssid == NULL))
2384 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2385 (u32) -1, cbss->channel,
2392 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2394 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
2395 const u8 *buf, size_t len, bool tx,
2398 struct ieee80211_event event = {
2400 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
2401 .u.mlme.reason = reason,
2405 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len);
2407 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
2409 drv_event_callback(sdata->local, sdata, &event);
2412 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2414 struct ieee80211_local *local = sdata->local;
2415 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2416 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2419 if (!ifmgd->associated) {
2420 sdata_unlock(sdata);
2424 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2425 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2427 mutex_lock(&local->mtx);
2428 sdata->vif.csa_active = false;
2429 ifmgd->csa_waiting_bcn = false;
2430 if (sdata->csa_block_tx) {
2431 ieee80211_wake_vif_queues(local, sdata,
2432 IEEE80211_QUEUE_STOP_REASON_CSA);
2433 sdata->csa_block_tx = false;
2435 mutex_unlock(&local->mtx);
2437 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
2438 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2440 sdata_unlock(sdata);
2443 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2445 struct ieee80211_sub_if_data *sdata =
2446 container_of(work, struct ieee80211_sub_if_data,
2447 u.mgd.beacon_connection_loss_work);
2448 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2449 struct sta_info *sta;
2451 if (ifmgd->associated) {
2453 sta = sta_info_get(sdata, ifmgd->bssid);
2455 sta->beacon_loss_count++;
2459 if (ifmgd->connection_loss) {
2460 sdata_info(sdata, "Connection to AP %pM lost\n",
2462 __ieee80211_disconnect(sdata);
2464 ieee80211_mgd_probe_ap(sdata, true);
2468 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2470 struct ieee80211_sub_if_data *sdata =
2471 container_of(work, struct ieee80211_sub_if_data,
2472 u.mgd.csa_connection_drop_work);
2474 __ieee80211_disconnect(sdata);
2477 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2479 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2480 struct ieee80211_hw *hw = &sdata->local->hw;
2482 trace_api_beacon_loss(sdata);
2484 sdata->u.mgd.connection_loss = false;
2485 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2487 EXPORT_SYMBOL(ieee80211_beacon_loss);
2489 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2491 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2492 struct ieee80211_hw *hw = &sdata->local->hw;
2494 trace_api_connection_loss(sdata);
2496 sdata->u.mgd.connection_loss = true;
2497 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2499 EXPORT_SYMBOL(ieee80211_connection_loss);
2502 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2505 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2507 sdata_assert_lock(sdata);
2511 * we are not authenticated yet, the only timer that could be
2512 * running is the timeout for the authentication response which
2513 * which is not relevant anymore.
2515 del_timer_sync(&sdata->u.mgd.timer);
2516 sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2518 eth_zero_addr(sdata->u.mgd.bssid);
2519 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2520 sdata->u.mgd.flags = 0;
2521 mutex_lock(&sdata->local->mtx);
2522 ieee80211_vif_release_channel(sdata);
2523 mutex_unlock(&sdata->local->mtx);
2526 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2528 sdata->u.mgd.auth_data = NULL;
2531 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2534 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2536 sdata_assert_lock(sdata);
2540 * we are not associated yet, the only timer that could be
2541 * running is the timeout for the association response which
2542 * which is not relevant anymore.
2544 del_timer_sync(&sdata->u.mgd.timer);
2545 sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2547 eth_zero_addr(sdata->u.mgd.bssid);
2548 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2549 sdata->u.mgd.flags = 0;
2550 sdata->flags &= ~IEEE80211_SDATA_MU_MIMO_OWNER;
2551 mutex_lock(&sdata->local->mtx);
2552 ieee80211_vif_release_channel(sdata);
2553 mutex_unlock(&sdata->local->mtx);
2557 sdata->u.mgd.assoc_data = NULL;
2560 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2561 struct ieee80211_mgmt *mgmt, size_t len)
2563 struct ieee80211_local *local = sdata->local;
2564 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2566 struct ieee802_11_elems elems;
2569 pos = mgmt->u.auth.variable;
2570 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2571 if (!elems.challenge)
2573 auth_data->expected_transaction = 4;
2574 drv_mgd_prepare_tx(sdata->local, sdata);
2575 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2576 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2577 IEEE80211_TX_INTFL_MLME_CONN_TX;
2578 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2579 elems.challenge - 2, elems.challenge_len + 2,
2580 auth_data->bss->bssid, auth_data->bss->bssid,
2581 auth_data->key, auth_data->key_len,
2582 auth_data->key_idx, tx_flags);
2585 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2586 struct ieee80211_mgmt *mgmt, size_t len)
2588 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2590 u16 auth_alg, auth_transaction, status_code;
2591 struct sta_info *sta;
2592 struct ieee80211_event event = {
2594 .u.mlme.data = AUTH_EVENT,
2597 sdata_assert_lock(sdata);
2602 if (!ifmgd->auth_data || ifmgd->auth_data->done)
2605 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2607 if (!ether_addr_equal(bssid, mgmt->bssid))
2610 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2611 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2612 status_code = le16_to_cpu(mgmt->u.auth.status_code);
2614 if (auth_alg != ifmgd->auth_data->algorithm ||
2615 auth_transaction != ifmgd->auth_data->expected_transaction) {
2616 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2617 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2619 ifmgd->auth_data->expected_transaction);
2623 if (status_code != WLAN_STATUS_SUCCESS) {
2624 sdata_info(sdata, "%pM denied authentication (status %d)\n",
2625 mgmt->sa, status_code);
2626 ieee80211_destroy_auth_data(sdata, false);
2627 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2628 event.u.mlme.status = MLME_DENIED;
2629 event.u.mlme.reason = status_code;
2630 drv_event_callback(sdata->local, sdata, &event);
2634 switch (ifmgd->auth_data->algorithm) {
2635 case WLAN_AUTH_OPEN:
2636 case WLAN_AUTH_LEAP:
2640 case WLAN_AUTH_SHARED_KEY:
2641 if (ifmgd->auth_data->expected_transaction != 4) {
2642 ieee80211_auth_challenge(sdata, mgmt, len);
2643 /* need another frame */
2648 WARN_ONCE(1, "invalid auth alg %d",
2649 ifmgd->auth_data->algorithm);
2653 event.u.mlme.status = MLME_SUCCESS;
2654 drv_event_callback(sdata->local, sdata, &event);
2655 sdata_info(sdata, "authenticated\n");
2656 ifmgd->auth_data->done = true;
2657 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2658 ifmgd->auth_data->timeout_started = true;
2659 run_again(sdata, ifmgd->auth_data->timeout);
2661 if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
2662 ifmgd->auth_data->expected_transaction != 2) {
2664 * Report auth frame to user space for processing since another
2665 * round of Authentication frames is still needed.
2667 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2671 /* move station state to auth */
2672 mutex_lock(&sdata->local->sta_mtx);
2673 sta = sta_info_get(sdata, bssid);
2675 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2678 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2679 sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2682 mutex_unlock(&sdata->local->sta_mtx);
2684 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2687 mutex_unlock(&sdata->local->sta_mtx);
2688 /* ignore frame -- wait for timeout */
2691 #define case_WLAN(type) \
2692 case WLAN_REASON_##type: return #type
2694 static const char *ieee80211_get_reason_code_string(u16 reason_code)
2696 switch (reason_code) {
2697 case_WLAN(UNSPECIFIED);
2698 case_WLAN(PREV_AUTH_NOT_VALID);
2699 case_WLAN(DEAUTH_LEAVING);
2700 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
2701 case_WLAN(DISASSOC_AP_BUSY);
2702 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
2703 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
2704 case_WLAN(DISASSOC_STA_HAS_LEFT);
2705 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
2706 case_WLAN(DISASSOC_BAD_POWER);
2707 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
2708 case_WLAN(INVALID_IE);
2709 case_WLAN(MIC_FAILURE);
2710 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
2711 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
2712 case_WLAN(IE_DIFFERENT);
2713 case_WLAN(INVALID_GROUP_CIPHER);
2714 case_WLAN(INVALID_PAIRWISE_CIPHER);
2715 case_WLAN(INVALID_AKMP);
2716 case_WLAN(UNSUPP_RSN_VERSION);
2717 case_WLAN(INVALID_RSN_IE_CAP);
2718 case_WLAN(IEEE8021X_FAILED);
2719 case_WLAN(CIPHER_SUITE_REJECTED);
2720 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
2721 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
2722 case_WLAN(DISASSOC_LOW_ACK);
2723 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
2724 case_WLAN(QSTA_LEAVE_QBSS);
2725 case_WLAN(QSTA_NOT_USE);
2726 case_WLAN(QSTA_REQUIRE_SETUP);
2727 case_WLAN(QSTA_TIMEOUT);
2728 case_WLAN(QSTA_CIPHER_NOT_SUPP);
2729 case_WLAN(MESH_PEER_CANCELED);
2730 case_WLAN(MESH_MAX_PEERS);
2731 case_WLAN(MESH_CONFIG);
2732 case_WLAN(MESH_CLOSE);
2733 case_WLAN(MESH_MAX_RETRIES);
2734 case_WLAN(MESH_CONFIRM_TIMEOUT);
2735 case_WLAN(MESH_INVALID_GTK);
2736 case_WLAN(MESH_INCONSISTENT_PARAM);
2737 case_WLAN(MESH_INVALID_SECURITY);
2738 case_WLAN(MESH_PATH_ERROR);
2739 case_WLAN(MESH_PATH_NOFORWARD);
2740 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
2741 case_WLAN(MAC_EXISTS_IN_MBSS);
2742 case_WLAN(MESH_CHAN_REGULATORY);
2743 case_WLAN(MESH_CHAN);
2744 default: return "<unknown>";
2748 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
2749 struct ieee80211_mgmt *mgmt, size_t len)
2751 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2752 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
2754 sdata_assert_lock(sdata);
2759 if (ifmgd->associated &&
2760 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
2761 const u8 *bssid = ifmgd->associated->bssid;
2763 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
2765 ieee80211_get_reason_code_string(reason_code));
2767 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2769 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
2774 if (ifmgd->assoc_data &&
2775 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
2776 const u8 *bssid = ifmgd->assoc_data->bss->bssid;
2779 "deauthenticated from %pM while associating (Reason: %u=%s)\n",
2781 ieee80211_get_reason_code_string(reason_code));
2783 ieee80211_destroy_assoc_data(sdata, false);
2785 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2791 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
2792 struct ieee80211_mgmt *mgmt, size_t len)
2794 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2797 sdata_assert_lock(sdata);
2802 if (!ifmgd->associated ||
2803 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2806 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
2808 sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
2809 mgmt->sa, reason_code);
2811 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2813 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code);
2816 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
2817 u8 *supp_rates, unsigned int supp_rates_len,
2818 u32 *rates, u32 *basic_rates,
2819 bool *have_higher_than_11mbit,
2820 int *min_rate, int *min_rate_index,
2821 int shift, u32 rate_flags)
2825 for (i = 0; i < supp_rates_len; i++) {
2826 int rate = supp_rates[i] & 0x7f;
2827 bool is_basic = !!(supp_rates[i] & 0x80);
2829 if ((rate * 5 * (1 << shift)) > 110)
2830 *have_higher_than_11mbit = true;
2833 * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
2834 * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
2836 * Note: Even through the membership selector and the basic
2837 * rate flag share the same bit, they are not exactly
2840 if (!!(supp_rates[i] & 0x80) &&
2841 (supp_rates[i] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY)
2844 for (j = 0; j < sband->n_bitrates; j++) {
2845 struct ieee80211_rate *br;
2848 br = &sband->bitrates[j];
2849 if ((rate_flags & br->flags) != rate_flags)
2852 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
2853 if (brate == rate) {
2856 *basic_rates |= BIT(j);
2857 if ((rate * 5) < *min_rate) {
2858 *min_rate = rate * 5;
2859 *min_rate_index = j;
2867 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
2868 struct cfg80211_bss *cbss,
2869 struct ieee80211_mgmt *mgmt, size_t len)
2871 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2872 struct ieee80211_local *local = sdata->local;
2873 struct ieee80211_supported_band *sband;
2874 struct sta_info *sta;
2876 u16 capab_info, aid;
2877 struct ieee802_11_elems elems;
2878 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2879 const struct cfg80211_bss_ies *bss_ies = NULL;
2880 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
2885 /* AssocResp and ReassocResp have identical structure */
2887 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
2888 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
2890 if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2891 sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
2893 aid &= ~(BIT(15) | BIT(14));
2895 ifmgd->broken_ap = false;
2897 if (aid == 0 || aid > IEEE80211_MAX_AID) {
2898 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
2901 ifmgd->broken_ap = true;
2904 pos = mgmt->u.assoc_resp.variable;
2905 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2907 if (!elems.supp_rates) {
2908 sdata_info(sdata, "no SuppRates element in AssocResp\n");
2913 ifmgd->tdls_chan_switch_prohibited =
2914 elems.ext_capab && elems.ext_capab_len >= 5 &&
2915 (elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
2918 * Some APs are erroneously not including some information in their
2919 * (re)association response frames. Try to recover by using the data
2920 * from the beacon or probe response. This seems to afflict mobile
2921 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2922 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2924 if ((assoc_data->wmm && !elems.wmm_param) ||
2925 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2926 (!elems.ht_cap_elem || !elems.ht_operation)) ||
2927 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2928 (!elems.vht_cap_elem || !elems.vht_operation))) {
2929 const struct cfg80211_bss_ies *ies;
2930 struct ieee802_11_elems bss_elems;
2933 ies = rcu_dereference(cbss->ies);
2935 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
2941 ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
2943 if (assoc_data->wmm &&
2944 !elems.wmm_param && bss_elems.wmm_param) {
2945 elems.wmm_param = bss_elems.wmm_param;
2947 "AP bug: WMM param missing from AssocResp\n");
2951 * Also check if we requested HT/VHT, otherwise the AP doesn't
2952 * have to include the IEs in the (re)association response.
2954 if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
2955 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2956 elems.ht_cap_elem = bss_elems.ht_cap_elem;
2958 "AP bug: HT capability missing from AssocResp\n");
2960 if (!elems.ht_operation && bss_elems.ht_operation &&
2961 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2962 elems.ht_operation = bss_elems.ht_operation;
2964 "AP bug: HT operation missing from AssocResp\n");
2966 if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
2967 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2968 elems.vht_cap_elem = bss_elems.vht_cap_elem;
2970 "AP bug: VHT capa missing from AssocResp\n");
2972 if (!elems.vht_operation && bss_elems.vht_operation &&
2973 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2974 elems.vht_operation = bss_elems.vht_operation;
2976 "AP bug: VHT operation missing from AssocResp\n");
2981 * We previously checked these in the beacon/probe response, so
2982 * they should be present here. This is just a safety net.
2984 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2985 (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
2987 "HT AP is missing WMM params or HT capability/operation\n");
2992 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2993 (!elems.vht_cap_elem || !elems.vht_operation)) {
2995 "VHT AP is missing VHT capability/operation\n");
3000 mutex_lock(&sdata->local->sta_mtx);
3002 * station info was already allocated and inserted before
3003 * the association and should be available to us
3005 sta = sta_info_get(sdata, cbss->bssid);
3006 if (WARN_ON(!sta)) {
3007 mutex_unlock(&sdata->local->sta_mtx);
3012 sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
3014 /* Set up internal HT/VHT capabilities */
3015 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
3016 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
3017 elems.ht_cap_elem, sta);
3019 if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
3020 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
3021 elems.vht_cap_elem, sta);
3024 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
3025 * in their association response, so ignore that data for our own
3026 * configuration. If it changed since the last beacon, we'll get the
3027 * next beacon and update then.
3031 * If an operating mode notification IE is present, override the
3032 * NSS calculation (that would be done in rate_control_rate_init())
3033 * and use the # of streams from that element.
3035 if (elems.opmode_notif &&
3036 !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
3039 nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
3040 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
3042 sta->sta.rx_nss = nss;
3045 rate_control_rate_init(sta);
3047 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
3048 set_sta_flag(sta, WLAN_STA_MFP);
3050 sta->sta.wme = elems.wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
3052 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
3053 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
3054 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
3057 "failed to move station %pM to desired state\n",
3059 WARN_ON(__sta_info_destroy(sta));
3060 mutex_unlock(&sdata->local->sta_mtx);
3065 mutex_unlock(&sdata->local->sta_mtx);
3068 * Always handle WMM once after association regardless
3069 * of the first value the AP uses. Setting -1 here has
3070 * that effect because the AP values is an unsigned
3073 ifmgd->wmm_last_param_set = -1;
3075 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && elems.wmm_param)
3076 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3077 elems.wmm_param_len);
3079 ieee80211_set_wmm_default(sdata, false);
3080 changed |= BSS_CHANGED_QOS;
3082 /* set AID and assoc capability,
3083 * ieee80211_set_associated() will tell the driver */
3084 bss_conf->aid = aid;
3085 bss_conf->assoc_capability = capab_info;
3086 ieee80211_set_associated(sdata, cbss, changed);
3089 * If we're using 4-addr mode, let the AP know that we're
3090 * doing so, so that it can create the STA VLAN on its side
3092 if (ifmgd->use_4addr)
3093 ieee80211_send_4addr_nullfunc(local, sdata);
3096 * Start timer to probe the connection to the AP now.
3097 * Also start the timer that will detect beacon loss.
3099 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
3100 ieee80211_sta_reset_beacon_monitor(sdata);
3108 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3109 struct ieee80211_mgmt *mgmt,
3112 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3113 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3114 u16 capab_info, status_code, aid;
3115 struct ieee802_11_elems elems;
3116 int ac, uapsd_queues = -1;
3119 struct cfg80211_bss *bss;
3120 struct ieee80211_event event = {
3122 .u.mlme.data = ASSOC_EVENT,
3125 sdata_assert_lock(sdata);
3129 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3133 * AssocResp and ReassocResp have identical structure, so process both
3134 * of them in this function.
3140 reassoc = ieee80211_is_reassoc_req(mgmt->frame_control);
3141 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3142 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3143 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3146 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3147 reassoc ? "Rea" : "A", mgmt->sa,
3148 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3150 pos = mgmt->u.assoc_resp.variable;
3151 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
3153 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3154 elems.timeout_int &&
3155 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3157 tu = le32_to_cpu(elems.timeout_int->value);
3158 ms = tu * 1024 / 1000;
3160 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3162 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3163 assoc_data->timeout_started = true;
3164 if (ms > IEEE80211_ASSOC_TIMEOUT)
3165 run_again(sdata, assoc_data->timeout);
3169 bss = assoc_data->bss;
3171 if (status_code != WLAN_STATUS_SUCCESS) {
3172 sdata_info(sdata, "%pM denied association (code=%d)\n",
3173 mgmt->sa, status_code);
3174 ieee80211_destroy_assoc_data(sdata, false);
3175 event.u.mlme.status = MLME_DENIED;
3176 event.u.mlme.reason = status_code;
3177 drv_event_callback(sdata->local, sdata, &event);
3179 if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
3180 /* oops -- internal error -- send timeout for now */
3181 ieee80211_destroy_assoc_data(sdata, false);
3182 cfg80211_assoc_timeout(sdata->dev, bss);
3185 event.u.mlme.status = MLME_SUCCESS;
3186 drv_event_callback(sdata->local, sdata, &event);
3187 sdata_info(sdata, "associated\n");
3190 * destroy assoc_data afterwards, as otherwise an idle
3191 * recalc after assoc_data is NULL but before associated
3192 * is set can cause the interface to go idle
3194 ieee80211_destroy_assoc_data(sdata, true);
3196 /* get uapsd queues configuration */
3198 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3199 if (sdata->tx_conf[ac].uapsd)
3200 uapsd_queues |= BIT(ac);
3203 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues);
3206 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3207 struct ieee80211_mgmt *mgmt, size_t len,
3208 struct ieee80211_rx_status *rx_status,
3209 struct ieee802_11_elems *elems)
3211 struct ieee80211_local *local = sdata->local;
3212 struct ieee80211_bss *bss;
3213 struct ieee80211_channel *channel;
3215 sdata_assert_lock(sdata);
3217 channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
3221 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
3224 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3225 ieee80211_rx_bss_put(local, bss);
3230 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3231 struct sk_buff *skb)
3233 struct ieee80211_mgmt *mgmt = (void *)skb->data;
3234 struct ieee80211_if_managed *ifmgd;
3235 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3236 size_t baselen, len = skb->len;
3237 struct ieee802_11_elems elems;
3239 ifmgd = &sdata->u.mgd;
3241 sdata_assert_lock(sdata);
3243 if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
3244 return; /* ignore ProbeResp to foreign address */
3246 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3250 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
3253 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3255 if (ifmgd->associated &&
3256 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3257 ieee80211_reset_ap_probe(sdata);
3261 * This is the canonical list of information elements we care about,
3262 * the filter code also gives us all changes to the Microsoft OUI
3263 * (00:50:F2) vendor IE which is used for WMM which we need to track,
3264 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3265 * changes to requested client power.
3267 * We implement beacon filtering in software since that means we can
3268 * avoid processing the frame here and in cfg80211, and userspace
3269 * will not be able to tell whether the hardware supports it or not.
3271 * XXX: This list needs to be dynamic -- userspace needs to be able to
3272 * add items it requires. It also needs to be able to tell us to
3273 * look out for other vendor IEs.
3275 static const u64 care_about_ies =
3276 (1ULL << WLAN_EID_COUNTRY) |
3277 (1ULL << WLAN_EID_ERP_INFO) |
3278 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
3279 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
3280 (1ULL << WLAN_EID_HT_CAPABILITY) |
3281 (1ULL << WLAN_EID_HT_OPERATION) |
3282 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3284 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3285 struct ieee80211_mgmt *mgmt, size_t len,
3286 struct ieee80211_rx_status *rx_status)
3288 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3289 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3291 struct ieee802_11_elems elems;
3292 struct ieee80211_local *local = sdata->local;
3293 struct ieee80211_chanctx_conf *chanctx_conf;
3294 struct ieee80211_channel *chan;
3295 struct sta_info *sta;
3301 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3303 sdata_assert_lock(sdata);
3305 /* Process beacon from the current BSS */
3306 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3311 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3312 if (!chanctx_conf) {
3317 if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
3321 chan = chanctx_conf->def.chan;
3324 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3325 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3326 ieee802_11_parse_elems(mgmt->u.beacon.variable,
3327 len - baselen, false, &elems);
3329 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3330 if (elems.tim && !elems.parse_error) {
3331 const struct ieee80211_tim_ie *tim_ie = elems.tim;
3332 ifmgd->dtim_period = tim_ie->dtim_period;
3334 ifmgd->have_beacon = true;
3335 ifmgd->assoc_data->need_beacon = false;
3336 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3337 sdata->vif.bss_conf.sync_tsf =
3338 le64_to_cpu(mgmt->u.beacon.timestamp);
3339 sdata->vif.bss_conf.sync_device_ts =
3340 rx_status->device_timestamp;
3342 sdata->vif.bss_conf.sync_dtim_count =
3343 elems.tim->dtim_count;
3345 sdata->vif.bss_conf.sync_dtim_count = 0;
3347 /* continue assoc process */
3348 ifmgd->assoc_data->timeout = jiffies;
3349 ifmgd->assoc_data->timeout_started = true;
3350 run_again(sdata, ifmgd->assoc_data->timeout);
3354 if (!ifmgd->associated ||
3355 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3357 bssid = ifmgd->associated->bssid;
3359 /* Track average RSSI from the Beacon frames of the current AP */
3360 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3361 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3362 ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
3363 ifmgd->last_cqm_event_signal = 0;
3364 ifmgd->count_beacon_signal = 1;
3365 ifmgd->last_ave_beacon_signal = 0;
3367 ifmgd->count_beacon_signal++;
3370 ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
3372 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3373 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3374 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3375 int last_sig = ifmgd->last_ave_beacon_signal;
3376 struct ieee80211_event event = {
3381 * if signal crosses either of the boundaries, invoke callback
3382 * with appropriate parameters
3384 if (sig > ifmgd->rssi_max_thold &&
3385 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3386 ifmgd->last_ave_beacon_signal = sig;
3387 event.u.rssi.data = RSSI_EVENT_HIGH;
3388 drv_event_callback(local, sdata, &event);
3389 } else if (sig < ifmgd->rssi_min_thold &&
3390 (last_sig >= ifmgd->rssi_max_thold ||
3392 ifmgd->last_ave_beacon_signal = sig;
3393 event.u.rssi.data = RSSI_EVENT_LOW;
3394 drv_event_callback(local, sdata, &event);
3398 if (bss_conf->cqm_rssi_thold &&
3399 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3400 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3401 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3402 int last_event = ifmgd->last_cqm_event_signal;
3403 int thold = bss_conf->cqm_rssi_thold;
3404 int hyst = bss_conf->cqm_rssi_hyst;
3407 (last_event == 0 || sig < last_event - hyst)) {
3408 ifmgd->last_cqm_event_signal = sig;
3409 ieee80211_cqm_rssi_notify(
3411 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3413 } else if (sig > thold &&
3414 (last_event == 0 || sig > last_event + hyst)) {
3415 ifmgd->last_cqm_event_signal = sig;
3416 ieee80211_cqm_rssi_notify(
3418 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3423 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3424 mlme_dbg_ratelimited(sdata,
3425 "cancelling AP probe due to a received beacon\n");
3426 ieee80211_reset_ap_probe(sdata);
3430 * Push the beacon loss detection into the future since
3431 * we are processing a beacon from the AP just now.
3433 ieee80211_sta_reset_beacon_monitor(sdata);
3435 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
3436 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
3437 len - baselen, false, &elems,
3438 care_about_ies, ncrc);
3440 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) {
3441 bool directed_tim = ieee80211_check_tim(elems.tim,
3445 if (local->hw.conf.dynamic_ps_timeout > 0) {
3446 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
3447 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
3448 ieee80211_hw_config(local,
3449 IEEE80211_CONF_CHANGE_PS);
3451 ieee80211_send_nullfunc(local, sdata, 0);
3452 } else if (!local->pspolling && sdata->u.mgd.powersave) {
3453 local->pspolling = true;
3456 * Here is assumed that the driver will be
3457 * able to send ps-poll frame and receive a
3458 * response even though power save mode is
3459 * enabled, but some drivers might require
3460 * to disable power save here. This needs
3461 * to be investigated.
3463 ieee80211_send_pspoll(local, sdata);
3468 if (sdata->vif.p2p) {
3469 struct ieee80211_p2p_noa_attr noa = {};
3472 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
3474 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
3475 (u8 *) &noa, sizeof(noa));
3477 if (sdata->u.mgd.p2p_noa_index != noa.index) {
3478 /* valid noa_attr and index changed */
3479 sdata->u.mgd.p2p_noa_index = noa.index;
3480 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
3481 changed |= BSS_CHANGED_P2P_PS;
3483 * make sure we update all information, the CRC
3484 * mechanism doesn't look at P2P attributes.
3486 ifmgd->beacon_crc_valid = false;
3488 } else if (sdata->u.mgd.p2p_noa_index != -1) {
3489 /* noa_attr not found and we had valid noa_attr before */
3490 sdata->u.mgd.p2p_noa_index = -1;
3491 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
3492 changed |= BSS_CHANGED_P2P_PS;
3493 ifmgd->beacon_crc_valid = false;
3497 if (ifmgd->csa_waiting_bcn)
3498 ieee80211_chswitch_post_beacon(sdata);
3501 * Update beacon timing and dtim count on every beacon appearance. This
3502 * will allow the driver to use the most updated values. Do it before
3503 * comparing this one with last received beacon.
3504 * IMPORTANT: These parameters would possibly be out of sync by the time
3505 * the driver will use them. The synchronized view is currently
3506 * guaranteed only in certain callbacks.
3508 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3509 sdata->vif.bss_conf.sync_tsf =
3510 le64_to_cpu(mgmt->u.beacon.timestamp);
3511 sdata->vif.bss_conf.sync_device_ts =
3512 rx_status->device_timestamp;
3514 sdata->vif.bss_conf.sync_dtim_count =
3515 elems.tim->dtim_count;
3517 sdata->vif.bss_conf.sync_dtim_count = 0;
3520 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
3522 ifmgd->beacon_crc = ncrc;
3523 ifmgd->beacon_crc_valid = true;
3525 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3527 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
3528 rx_status->device_timestamp,
3531 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
3532 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3533 elems.wmm_param_len))
3534 changed |= BSS_CHANGED_QOS;
3537 * If we haven't had a beacon before, tell the driver about the
3538 * DTIM period (and beacon timing if desired) now.
3540 if (!ifmgd->have_beacon) {
3541 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3543 bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
3545 bss_conf->dtim_period = 1;
3547 changed |= BSS_CHANGED_BEACON_INFO;
3548 ifmgd->have_beacon = true;
3550 mutex_lock(&local->iflist_mtx);
3551 ieee80211_recalc_ps(local, -1);
3552 mutex_unlock(&local->iflist_mtx);
3554 ieee80211_recalc_ps_vif(sdata);
3557 if (elems.erp_info) {
3559 erp_value = elems.erp_info[0];
3563 changed |= ieee80211_handle_bss_capability(sdata,
3564 le16_to_cpu(mgmt->u.beacon.capab_info),
3565 erp_valid, erp_value);
3567 mutex_lock(&local->sta_mtx);
3568 sta = sta_info_get(sdata, bssid);
3570 if (ieee80211_config_bw(sdata, sta,
3571 elems.ht_cap_elem, elems.ht_operation,
3572 elems.vht_operation, bssid, &changed)) {
3573 mutex_unlock(&local->sta_mtx);
3574 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3575 WLAN_REASON_DEAUTH_LEAVING,
3577 ieee80211_report_disconnect(sdata, deauth_buf,
3578 sizeof(deauth_buf), true,
3579 WLAN_REASON_DEAUTH_LEAVING);
3583 if (sta && elems.opmode_notif)
3584 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
3585 rx_status->band, true);
3586 mutex_unlock(&local->sta_mtx);
3588 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
3590 elems.country_elem_len,
3591 elems.pwr_constr_elem,
3592 elems.cisco_dtpc_elem);
3594 ieee80211_bss_info_change_notify(sdata, changed);
3597 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
3598 struct sk_buff *skb)
3600 struct ieee80211_rx_status *rx_status;
3601 struct ieee80211_mgmt *mgmt;
3603 struct ieee802_11_elems elems;
3606 rx_status = (struct ieee80211_rx_status *) skb->cb;
3607 mgmt = (struct ieee80211_mgmt *) skb->data;
3608 fc = le16_to_cpu(mgmt->frame_control);
3612 switch (fc & IEEE80211_FCTL_STYPE) {
3613 case IEEE80211_STYPE_BEACON:
3614 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
3616 case IEEE80211_STYPE_PROBE_RESP:
3617 ieee80211_rx_mgmt_probe_resp(sdata, skb);
3619 case IEEE80211_STYPE_AUTH:
3620 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
3622 case IEEE80211_STYPE_DEAUTH:
3623 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
3625 case IEEE80211_STYPE_DISASSOC:
3626 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
3628 case IEEE80211_STYPE_ASSOC_RESP:
3629 case IEEE80211_STYPE_REASSOC_RESP:
3630 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
3632 case IEEE80211_STYPE_ACTION:
3633 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
3634 ies_len = skb->len -
3635 offsetof(struct ieee80211_mgmt,
3636 u.action.u.chan_switch.variable);
3641 ieee802_11_parse_elems(
3642 mgmt->u.action.u.chan_switch.variable,
3643 ies_len, true, &elems);
3645 if (elems.parse_error)
3648 ieee80211_sta_process_chanswitch(sdata,
3650 rx_status->device_timestamp,
3652 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
3653 ies_len = skb->len -
3654 offsetof(struct ieee80211_mgmt,
3655 u.action.u.ext_chan_switch.variable);
3660 ieee802_11_parse_elems(
3661 mgmt->u.action.u.ext_chan_switch.variable,
3662 ies_len, true, &elems);
3664 if (elems.parse_error)
3667 /* for the handling code pretend this was also an IE */
3668 elems.ext_chansw_ie =
3669 &mgmt->u.action.u.ext_chan_switch.data;
3671 ieee80211_sta_process_chanswitch(sdata,
3673 rx_status->device_timestamp,
3678 sdata_unlock(sdata);
3681 static void ieee80211_sta_timer(unsigned long data)
3683 struct ieee80211_sub_if_data *sdata =
3684 (struct ieee80211_sub_if_data *) data;
3686 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3689 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
3690 u8 *bssid, u8 reason, bool tx)
3692 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3694 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
3697 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
3701 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
3703 struct ieee80211_local *local = sdata->local;
3704 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3705 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
3710 sdata_assert_lock(sdata);
3712 if (WARN_ON_ONCE(!auth_data))
3717 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
3718 sdata_info(sdata, "authentication with %pM timed out\n",
3719 auth_data->bss->bssid);
3722 * Most likely AP is not in the range so remove the
3723 * bss struct for that AP.
3725 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
3730 drv_mgd_prepare_tx(local, sdata);
3732 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
3733 auth_data->bss->bssid, auth_data->tries,
3734 IEEE80211_AUTH_MAX_TRIES);
3736 auth_data->expected_transaction = 2;
3738 if (auth_data->algorithm == WLAN_AUTH_SAE) {
3739 trans = auth_data->sae_trans;
3740 status = auth_data->sae_status;
3741 auth_data->expected_transaction = trans;
3744 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3745 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3746 IEEE80211_TX_INTFL_MLME_CONN_TX;
3748 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
3749 auth_data->data, auth_data->data_len,
3750 auth_data->bss->bssid,
3751 auth_data->bss->bssid, NULL, 0, 0,
3754 if (tx_flags == 0) {
3755 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
3756 auth_data->timeout_started = true;
3757 run_again(sdata, auth_data->timeout);
3759 auth_data->timeout =
3760 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
3761 auth_data->timeout_started = true;
3762 run_again(sdata, auth_data->timeout);
3768 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
3770 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3771 struct ieee80211_local *local = sdata->local;
3773 sdata_assert_lock(sdata);
3775 assoc_data->tries++;
3776 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
3777 sdata_info(sdata, "association with %pM timed out\n",
3778 assoc_data->bss->bssid);
3781 * Most likely AP is not in the range so remove the
3782 * bss struct for that AP.
3784 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
3789 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
3790 assoc_data->bss->bssid, assoc_data->tries,
3791 IEEE80211_ASSOC_MAX_TRIES);
3792 ieee80211_send_assoc(sdata);
3794 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3795 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
3796 assoc_data->timeout_started = true;
3797 run_again(sdata, assoc_data->timeout);
3799 assoc_data->timeout =
3800 round_jiffies_up(jiffies +
3801 IEEE80211_ASSOC_TIMEOUT_LONG);
3802 assoc_data->timeout_started = true;
3803 run_again(sdata, assoc_data->timeout);
3809 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
3810 __le16 fc, bool acked)
3812 struct ieee80211_local *local = sdata->local;
3814 sdata->u.mgd.status_fc = fc;
3815 sdata->u.mgd.status_acked = acked;
3816 sdata->u.mgd.status_received = true;
3818 ieee80211_queue_work(&local->hw, &sdata->work);
3821 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
3823 struct ieee80211_local *local = sdata->local;
3824 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3828 if (ifmgd->status_received) {
3829 __le16 fc = ifmgd->status_fc;
3830 bool status_acked = ifmgd->status_acked;
3832 ifmgd->status_received = false;
3833 if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
3835 ifmgd->auth_data->timeout =
3836 jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
3837 run_again(sdata, ifmgd->auth_data->timeout);
3839 ifmgd->auth_data->timeout = jiffies - 1;
3841 ifmgd->auth_data->timeout_started = true;
3842 } else if (ifmgd->assoc_data &&
3843 (ieee80211_is_assoc_req(fc) ||
3844 ieee80211_is_reassoc_req(fc))) {
3846 ifmgd->assoc_data->timeout =
3847 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
3848 run_again(sdata, ifmgd->assoc_data->timeout);
3850 ifmgd->assoc_data->timeout = jiffies - 1;
3852 ifmgd->assoc_data->timeout_started = true;
3856 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
3857 time_after(jiffies, ifmgd->auth_data->timeout)) {
3858 if (ifmgd->auth_data->done) {
3860 * ok ... we waited for assoc but userspace didn't,
3861 * so let's just kill the auth data
3863 ieee80211_destroy_auth_data(sdata, false);
3864 } else if (ieee80211_auth(sdata)) {
3866 struct ieee80211_event event = {
3868 .u.mlme.data = AUTH_EVENT,
3869 .u.mlme.status = MLME_TIMEOUT,
3872 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
3874 ieee80211_destroy_auth_data(sdata, false);
3876 cfg80211_auth_timeout(sdata->dev, bssid);
3877 drv_event_callback(sdata->local, sdata, &event);
3879 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
3880 run_again(sdata, ifmgd->auth_data->timeout);
3882 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
3883 time_after(jiffies, ifmgd->assoc_data->timeout)) {
3884 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
3885 ieee80211_do_assoc(sdata)) {
3886 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
3887 struct ieee80211_event event = {
3889 .u.mlme.data = ASSOC_EVENT,
3890 .u.mlme.status = MLME_TIMEOUT,
3893 ieee80211_destroy_assoc_data(sdata, false);
3894 cfg80211_assoc_timeout(sdata->dev, bss);
3895 drv_event_callback(sdata->local, sdata, &event);
3897 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
3898 run_again(sdata, ifmgd->assoc_data->timeout);
3900 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
3901 ifmgd->associated) {
3905 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
3907 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3908 max_tries = max_nullfunc_tries;
3910 max_tries = max_probe_tries;
3912 /* ACK received for nullfunc probing frame */
3913 if (!ifmgd->probe_send_count)
3914 ieee80211_reset_ap_probe(sdata);
3915 else if (ifmgd->nullfunc_failed) {
3916 if (ifmgd->probe_send_count < max_tries) {
3918 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3919 bssid, ifmgd->probe_send_count,
3921 ieee80211_mgd_probe_ap_send(sdata);
3924 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3926 ieee80211_sta_connection_lost(sdata, bssid,
3927 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3930 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
3931 run_again(sdata, ifmgd->probe_timeout);
3932 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3934 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3935 bssid, probe_wait_ms);
3936 ieee80211_sta_connection_lost(sdata, bssid,
3937 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3938 } else if (ifmgd->probe_send_count < max_tries) {
3940 "No probe response from AP %pM after %dms, try %d/%i\n",
3941 bssid, probe_wait_ms,
3942 ifmgd->probe_send_count, max_tries);
3943 ieee80211_mgd_probe_ap_send(sdata);
3946 * We actually lost the connection ... or did we?
3949 wiphy_debug(local->hw.wiphy,
3950 "%s: No probe response from AP %pM"
3951 " after %dms, disconnecting.\n",
3953 bssid, probe_wait_ms);
3955 ieee80211_sta_connection_lost(sdata, bssid,
3956 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3960 sdata_unlock(sdata);
3963 static void ieee80211_sta_bcn_mon_timer(unsigned long data)
3965 struct ieee80211_sub_if_data *sdata =
3966 (struct ieee80211_sub_if_data *) data;
3967 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3969 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
3972 sdata->u.mgd.connection_loss = false;
3973 ieee80211_queue_work(&sdata->local->hw,
3974 &sdata->u.mgd.beacon_connection_loss_work);
3977 static void ieee80211_sta_conn_mon_timer(unsigned long data)
3979 struct ieee80211_sub_if_data *sdata =
3980 (struct ieee80211_sub_if_data *) data;
3981 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3982 struct ieee80211_local *local = sdata->local;
3984 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
3987 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
3990 static void ieee80211_sta_monitor_work(struct work_struct *work)
3992 struct ieee80211_sub_if_data *sdata =
3993 container_of(work, struct ieee80211_sub_if_data,
3994 u.mgd.monitor_work);
3996 ieee80211_mgd_probe_ap(sdata, false);
3999 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
4001 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
4002 __ieee80211_stop_poll(sdata);
4004 /* let's probe the connection once */
4005 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
4006 ieee80211_queue_work(&sdata->local->hw,
4007 &sdata->u.mgd.monitor_work);
4008 /* and do all the other regular work too */
4009 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
4014 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
4016 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4017 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4021 if (ifmgd->auth_data || ifmgd->assoc_data) {
4022 const u8 *bssid = ifmgd->auth_data ?
4023 ifmgd->auth_data->bss->bssid :
4024 ifmgd->assoc_data->bss->bssid;
4027 * If we are trying to authenticate / associate while suspending,
4028 * cfg80211 won't know and won't actually abort those attempts,
4029 * thus we need to do that ourselves.
4031 ieee80211_send_deauth_disassoc(sdata, bssid,
4032 IEEE80211_STYPE_DEAUTH,
4033 WLAN_REASON_DEAUTH_LEAVING,
4035 if (ifmgd->assoc_data)
4036 ieee80211_destroy_assoc_data(sdata, false);
4037 if (ifmgd->auth_data)
4038 ieee80211_destroy_auth_data(sdata, false);
4039 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4040 IEEE80211_DEAUTH_FRAME_LEN);
4043 /* This is a bit of a hack - we should find a better and more generic
4044 * solution to this. Normally when suspending, cfg80211 will in fact
4045 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
4046 * auth (not so important) or assoc (this is the problem) process.
4048 * As a consequence, it can happen that we are in the process of both
4049 * associating and suspending, and receive an association response
4050 * after cfg80211 has checked if it needs to disconnect, but before
4051 * we actually set the flag to drop incoming frames. This will then
4052 * cause the workqueue flush to process the association response in
4053 * the suspend, resulting in a successful association just before it
4054 * tries to remove the interface from the driver, which now though
4055 * has a channel context assigned ... this results in issues.
4057 * To work around this (for now) simply deauth here again if we're
4060 if (ifmgd->associated && !sdata->local->wowlan) {
4062 struct cfg80211_deauth_request req = {
4063 .reason_code = WLAN_REASON_DEAUTH_LEAVING,
4067 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4068 ieee80211_mgd_deauth(sdata, &req);
4071 sdata_unlock(sdata);
4074 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
4076 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4079 if (!ifmgd->associated) {
4080 sdata_unlock(sdata);
4084 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4085 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4086 mlme_dbg(sdata, "driver requested disconnect after resume\n");
4087 ieee80211_sta_connection_lost(sdata,
4088 ifmgd->associated->bssid,
4089 WLAN_REASON_UNSPECIFIED,
4091 sdata_unlock(sdata);
4094 sdata_unlock(sdata);
4098 /* interface setup */
4099 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4101 struct ieee80211_if_managed *ifmgd;
4103 ifmgd = &sdata->u.mgd;
4104 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4105 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4106 INIT_WORK(&ifmgd->beacon_connection_loss_work,
4107 ieee80211_beacon_connection_loss_work);
4108 INIT_WORK(&ifmgd->csa_connection_drop_work,
4109 ieee80211_csa_connection_drop_work);
4110 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4111 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4112 ieee80211_tdls_peer_del_work);
4113 setup_timer(&ifmgd->timer, ieee80211_sta_timer,
4114 (unsigned long) sdata);
4115 setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
4116 (unsigned long) sdata);
4117 setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
4118 (unsigned long) sdata);
4119 setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
4120 (unsigned long) sdata);
4121 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4122 ieee80211_sta_handle_tspec_ac_params_wk);
4125 ifmgd->powersave = sdata->wdev.ps;
4126 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4127 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4128 ifmgd->p2p_noa_index = -1;
4130 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4131 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4133 ifmgd->req_smps = IEEE80211_SMPS_OFF;
4135 /* Setup TDLS data */
4136 spin_lock_init(&ifmgd->teardown_lock);
4137 ifmgd->teardown_skb = NULL;
4138 ifmgd->orig_teardown_skb = NULL;
4141 /* scan finished notification */
4142 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4144 struct ieee80211_sub_if_data *sdata;
4146 /* Restart STA timers */
4148 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4149 if (ieee80211_sdata_running(sdata))
4150 ieee80211_restart_sta_timer(sdata);
4155 int ieee80211_max_network_latency(struct notifier_block *nb,
4156 unsigned long data, void *dummy)
4158 s32 latency_usec = (s32) data;
4159 struct ieee80211_local *local =
4160 container_of(nb, struct ieee80211_local,
4161 network_latency_notifier);
4163 mutex_lock(&local->iflist_mtx);
4164 ieee80211_recalc_ps(local, latency_usec);
4165 mutex_unlock(&local->iflist_mtx);
4170 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4171 struct cfg80211_bss *cbss)
4173 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4174 const u8 *ht_cap_ie, *vht_cap_ie;
4175 const struct ieee80211_ht_cap *ht_cap;
4176 const struct ieee80211_vht_cap *vht_cap;
4179 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4182 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4183 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4184 ht_cap = (void *)(ht_cap_ie + 2);
4185 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4187 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4188 * "Tx Unequal Modulation Supported" fields.
4192 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4195 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4196 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4200 vht_cap = (void *)(vht_cap_ie + 2);
4201 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4202 for (nss = 8; nss > 0; nss--) {
4203 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4204 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4207 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4208 chains = max(chains, nss);
4214 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4215 struct cfg80211_bss *cbss)
4217 struct ieee80211_local *local = sdata->local;
4218 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4219 const struct ieee80211_ht_cap *ht_cap = NULL;
4220 const struct ieee80211_ht_operation *ht_oper = NULL;
4221 const struct ieee80211_vht_operation *vht_oper = NULL;
4222 struct ieee80211_supported_band *sband;
4223 struct cfg80211_chan_def chandef;
4226 sband = local->hw.wiphy->bands[cbss->channel->band];
4228 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
4229 IEEE80211_STA_DISABLE_80P80MHZ |
4230 IEEE80211_STA_DISABLE_160MHZ);
4234 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
4235 sband->ht_cap.ht_supported) {
4236 const u8 *ht_oper_ie, *ht_cap_ie;
4238 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
4239 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
4240 ht_oper = (void *)(ht_oper_ie + 2);
4242 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4243 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
4244 ht_cap = (void *)(ht_cap_ie + 2);
4247 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4252 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4253 sband->vht_cap.vht_supported) {
4254 const u8 *vht_oper_ie, *vht_cap;
4256 vht_oper_ie = ieee80211_bss_get_ie(cbss,
4257 WLAN_EID_VHT_OPERATION);
4258 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
4259 vht_oper = (void *)(vht_oper_ie + 2);
4260 if (vht_oper && !ht_oper) {
4263 "AP advertised VHT without HT, disabling both\n");
4264 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4265 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4268 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4269 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
4270 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4275 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
4277 ht_cap, ht_oper, vht_oper,
4280 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
4285 /* will change later if needed */
4286 sdata->smps_mode = IEEE80211_SMPS_OFF;
4288 mutex_lock(&local->mtx);
4290 * If this fails (possibly due to channel context sharing
4291 * on incompatible channels, e.g. 80+80 and 160 sharing the
4292 * same control channel) try to use a smaller bandwidth.
4294 ret = ieee80211_vif_use_channel(sdata, &chandef,
4295 IEEE80211_CHANCTX_SHARED);
4297 /* don't downgrade for 5 and 10 MHz channels, though. */
4298 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4299 chandef.width == NL80211_CHAN_WIDTH_10)
4302 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4303 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
4304 ret = ieee80211_vif_use_channel(sdata, &chandef,
4305 IEEE80211_CHANCTX_SHARED);
4308 mutex_unlock(&local->mtx);
4312 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
4313 struct cfg80211_bss *cbss, bool assoc,
4316 struct ieee80211_local *local = sdata->local;
4317 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4318 struct ieee80211_bss *bss = (void *)cbss->priv;
4319 struct sta_info *new_sta = NULL;
4320 struct ieee80211_supported_band *sband;
4321 bool have_sta = false;
4324 sband = local->hw.wiphy->bands[cbss->channel->band];
4326 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
4331 have_sta = sta_info_get(sdata, cbss->bssid);
4336 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
4341 if (new_sta || override) {
4342 err = ieee80211_prep_channel(sdata, cbss);
4345 sta_info_free(local, new_sta);
4351 u32 rates = 0, basic_rates = 0;
4352 bool have_higher_than_11mbit;
4353 int min_rate = INT_MAX, min_rate_index = -1;
4354 struct ieee80211_chanctx_conf *chanctx_conf;
4355 const struct cfg80211_bss_ies *ies;
4356 int shift = ieee80211_vif_get_shift(&sdata->vif);
4360 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
4361 if (WARN_ON(!chanctx_conf)) {
4363 sta_info_free(local, new_sta);
4366 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
4369 ieee80211_get_rates(sband, bss->supp_rates,
4370 bss->supp_rates_len,
4371 &rates, &basic_rates,
4372 &have_higher_than_11mbit,
4373 &min_rate, &min_rate_index,
4377 * This used to be a workaround for basic rates missing
4378 * in the association response frame. Now that we no
4379 * longer use the basic rates from there, it probably
4380 * doesn't happen any more, but keep the workaround so
4381 * in case some *other* APs are buggy in different ways
4382 * we can connect -- with a warning.
4384 if (!basic_rates && min_rate_index >= 0) {
4386 "No basic rates, using min rate instead\n");
4387 basic_rates = BIT(min_rate_index);
4390 new_sta->sta.supp_rates[cbss->channel->band] = rates;
4391 sdata->vif.bss_conf.basic_rates = basic_rates;
4393 /* cf. IEEE 802.11 9.2.12 */
4394 if (cbss->channel->band == IEEE80211_BAND_2GHZ &&
4395 have_higher_than_11mbit)
4396 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
4398 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
4400 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
4402 /* set timing information */
4403 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
4405 ies = rcu_dereference(cbss->beacon_ies);
4409 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4410 sdata->vif.bss_conf.sync_device_ts =
4411 bss->device_ts_beacon;
4412 tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4413 ies->data, ies->len);
4414 if (tim_ie && tim_ie[1] >= 2)
4415 sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
4417 sdata->vif.bss_conf.sync_dtim_count = 0;
4418 } else if (!ieee80211_hw_check(&sdata->local->hw,
4419 TIMING_BEACON_ONLY)) {
4420 ies = rcu_dereference(cbss->proberesp_ies);
4421 /* must be non-NULL since beacon IEs were NULL */
4422 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4423 sdata->vif.bss_conf.sync_device_ts =
4424 bss->device_ts_presp;
4425 sdata->vif.bss_conf.sync_dtim_count = 0;
4427 sdata->vif.bss_conf.sync_tsf = 0;
4428 sdata->vif.bss_conf.sync_device_ts = 0;
4429 sdata->vif.bss_conf.sync_dtim_count = 0;
4433 /* tell driver about BSSID, basic rates and timing */
4434 ieee80211_bss_info_change_notify(sdata,
4435 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
4436 BSS_CHANGED_BEACON_INT);
4439 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
4441 err = sta_info_insert(new_sta);
4445 "failed to insert STA entry for the AP (error %d)\n",
4450 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
4452 /* Cancel scan to ensure that nothing interferes with connection */
4453 if (local->scanning)
4454 ieee80211_scan_cancel(local);
4460 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
4461 struct cfg80211_auth_request *req)
4463 struct ieee80211_local *local = sdata->local;
4464 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4465 struct ieee80211_mgd_auth_data *auth_data;
4469 /* prepare auth data structure */
4471 switch (req->auth_type) {
4472 case NL80211_AUTHTYPE_OPEN_SYSTEM:
4473 auth_alg = WLAN_AUTH_OPEN;
4475 case NL80211_AUTHTYPE_SHARED_KEY:
4476 if (IS_ERR(local->wep_tx_tfm))
4478 auth_alg = WLAN_AUTH_SHARED_KEY;
4480 case NL80211_AUTHTYPE_FT:
4481 auth_alg = WLAN_AUTH_FT;
4483 case NL80211_AUTHTYPE_NETWORK_EAP:
4484 auth_alg = WLAN_AUTH_LEAP;
4486 case NL80211_AUTHTYPE_SAE:
4487 auth_alg = WLAN_AUTH_SAE;
4493 auth_data = kzalloc(sizeof(*auth_data) + req->sae_data_len +
4494 req->ie_len, GFP_KERNEL);
4498 auth_data->bss = req->bss;
4500 if (req->sae_data_len >= 4) {
4501 __le16 *pos = (__le16 *) req->sae_data;
4502 auth_data->sae_trans = le16_to_cpu(pos[0]);
4503 auth_data->sae_status = le16_to_cpu(pos[1]);
4504 memcpy(auth_data->data, req->sae_data + 4,
4505 req->sae_data_len - 4);
4506 auth_data->data_len += req->sae_data_len - 4;
4509 if (req->ie && req->ie_len) {
4510 memcpy(&auth_data->data[auth_data->data_len],
4511 req->ie, req->ie_len);
4512 auth_data->data_len += req->ie_len;
4515 if (req->key && req->key_len) {
4516 auth_data->key_len = req->key_len;
4517 auth_data->key_idx = req->key_idx;
4518 memcpy(auth_data->key, req->key, req->key_len);
4521 auth_data->algorithm = auth_alg;
4523 /* try to authenticate/probe */
4525 if ((ifmgd->auth_data && !ifmgd->auth_data->done) ||
4526 ifmgd->assoc_data) {
4531 if (ifmgd->auth_data)
4532 ieee80211_destroy_auth_data(sdata, false);
4534 /* prep auth_data so we don't go into idle on disassoc */
4535 ifmgd->auth_data = auth_data;
4537 if (ifmgd->associated) {
4538 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4540 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4541 WLAN_REASON_UNSPECIFIED,
4544 ieee80211_report_disconnect(sdata, frame_buf,
4545 sizeof(frame_buf), true,
4546 WLAN_REASON_UNSPECIFIED);
4549 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
4551 err = ieee80211_prep_connection(sdata, req->bss, false, false);
4555 err = ieee80211_auth(sdata);
4557 sta_info_destroy_addr(sdata, req->bss->bssid);
4561 /* hold our own reference */
4562 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
4566 eth_zero_addr(ifmgd->bssid);
4567 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4568 ifmgd->auth_data = NULL;
4569 mutex_lock(&sdata->local->mtx);
4570 ieee80211_vif_release_channel(sdata);
4571 mutex_unlock(&sdata->local->mtx);
4577 static bool ieee80211_usable_wmm_params(struct ieee80211_sub_if_data *sdata,
4578 const u8 *wmm_param, int len)
4586 if (wmm_param[5] != 1 /* version */)
4589 pos = wmm_param + 8;
4592 for (; left >= 4; left -= 4, pos += 4) {
4593 u8 aifsn = pos[0] & 0x0f;
4594 u8 ecwmin = pos[1] & 0x0f;
4595 u8 ecwmax = (pos[1] & 0xf0) >> 4;
4596 int aci = (pos[0] >> 5) & 0x03;
4600 "AP has invalid WMM params (AIFSN=%d for ACI %d), disabling WMM\n",
4604 if (ecwmin > ecwmax) {
4606 "AP has invalid WMM params (ECWmin/max=%d/%d for ACI %d), disabling WMM\n",
4607 ecwmin, ecwmax, aci);
4615 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
4616 struct cfg80211_assoc_request *req)
4618 struct ieee80211_local *local = sdata->local;
4619 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4620 struct ieee80211_bss *bss = (void *)req->bss->priv;
4621 struct ieee80211_mgd_assoc_data *assoc_data;
4622 const struct cfg80211_bss_ies *beacon_ies;
4623 struct ieee80211_supported_band *sband;
4624 const u8 *ssidie, *ht_ie, *vht_ie;
4626 bool override = false;
4628 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
4633 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
4639 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
4640 assoc_data->ssid_len = ssidie[1];
4643 if (ifmgd->associated) {
4644 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4646 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4647 WLAN_REASON_UNSPECIFIED,
4650 ieee80211_report_disconnect(sdata, frame_buf,
4651 sizeof(frame_buf), true,
4652 WLAN_REASON_UNSPECIFIED);
4655 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
4660 if (ifmgd->assoc_data) {
4665 if (ifmgd->auth_data) {
4668 /* keep sta info, bssid if matching */
4669 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
4670 ieee80211_destroy_auth_data(sdata, match);
4673 /* prepare assoc data */
4675 ifmgd->beacon_crc_valid = false;
4677 assoc_data->wmm = bss->wmm_used &&
4678 (local->hw.queues >= IEEE80211_NUM_ACS);
4679 if (assoc_data->wmm) {
4680 /* try to check validity of WMM params IE */
4681 const struct cfg80211_bss_ies *ies;
4682 const u8 *wp, *start, *end;
4685 ies = rcu_dereference(req->bss->ies);
4687 end = start + ies->len;
4690 wp = cfg80211_find_vendor_ie(
4692 WLAN_OUI_TYPE_MICROSOFT_WMM,
4693 start, end - start);
4696 start = wp + wp[1] + 2;
4697 /* if this IE is too short, try the next */
4700 /* if this IE is WMM params, we found what we wanted */
4705 if (!wp || !ieee80211_usable_wmm_params(sdata, wp + 2,
4707 assoc_data->wmm = false;
4708 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
4714 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4715 * We still associate in non-HT mode (11a/b/g) if any one of these
4716 * ciphers is configured as pairwise.
4717 * We can set this to true for non-11n hardware, that'll be checked
4718 * separately along with the peer capabilities.
4720 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
4721 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
4722 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
4723 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
4724 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4725 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4726 netdev_info(sdata->dev,
4727 "disabling HT/VHT due to WEP/TKIP use\n");
4731 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4732 sband = local->hw.wiphy->bands[req->bss->channel->band];
4733 if (!sband->ht_cap.ht_supported ||
4734 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4735 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4736 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4737 if (!bss->wmm_used &&
4738 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4739 netdev_info(sdata->dev,
4740 "disabling HT as WMM/QoS is not supported by the AP\n");
4743 /* disable VHT if we don't support it or the AP doesn't use WMM */
4744 if (!sband->vht_cap.vht_supported ||
4745 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4746 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4747 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4748 if (!bss->wmm_used &&
4749 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4750 netdev_info(sdata->dev,
4751 "disabling VHT as WMM/QoS is not supported by the AP\n");
4754 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
4755 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
4756 sizeof(ifmgd->ht_capa_mask));
4758 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
4759 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
4760 sizeof(ifmgd->vht_capa_mask));
4762 if (req->ie && req->ie_len) {
4763 memcpy(assoc_data->ie, req->ie, req->ie_len);
4764 assoc_data->ie_len = req->ie_len;
4767 assoc_data->bss = req->bss;
4769 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
4770 if (ifmgd->powersave)
4771 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
4773 sdata->smps_mode = IEEE80211_SMPS_OFF;
4775 sdata->smps_mode = ifmgd->req_smps;
4777 assoc_data->capability = req->bss->capability;
4778 assoc_data->supp_rates = bss->supp_rates;
4779 assoc_data->supp_rates_len = bss->supp_rates_len;
4782 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
4783 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
4784 assoc_data->ap_ht_param =
4785 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
4787 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4788 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
4789 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
4790 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
4791 sizeof(struct ieee80211_vht_cap));
4793 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4796 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
4797 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
4798 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
4799 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
4801 if (bss->wmm_used && bss->uapsd_supported &&
4802 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
4803 assoc_data->uapsd = true;
4804 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
4806 assoc_data->uapsd = false;
4807 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
4810 if (req->prev_bssid)
4811 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
4814 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
4815 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
4817 ifmgd->mfp = IEEE80211_MFP_DISABLED;
4818 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
4821 if (req->flags & ASSOC_REQ_USE_RRM)
4822 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
4824 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
4826 if (req->crypto.control_port)
4827 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
4829 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
4831 sdata->control_port_protocol = req->crypto.control_port_ethertype;
4832 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
4833 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
4836 /* kick off associate process */
4838 ifmgd->assoc_data = assoc_data;
4839 ifmgd->dtim_period = 0;
4840 ifmgd->have_beacon = false;
4842 /* override HT/VHT configuration only if the AP and we support it */
4843 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
4844 struct ieee80211_sta_ht_cap sta_ht_cap;
4846 if (req->flags & ASSOC_REQ_DISABLE_HT)
4849 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
4850 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
4852 /* check for 40 MHz disable override */
4853 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) &&
4854 sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
4855 !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
4858 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4859 req->flags & ASSOC_REQ_DISABLE_VHT)
4863 if (req->flags & ASSOC_REQ_DISABLE_HT) {
4864 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4865 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4868 if (req->flags & ASSOC_REQ_DISABLE_VHT)
4869 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4871 err = ieee80211_prep_connection(sdata, req->bss, true, override);
4876 beacon_ies = rcu_dereference(req->bss->beacon_ies);
4878 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) &&
4881 * Wait up to one beacon interval ...
4882 * should this be more if we miss one?
4884 sdata_info(sdata, "waiting for beacon from %pM\n",
4886 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
4887 assoc_data->timeout_started = true;
4888 assoc_data->need_beacon = true;
4889 } else if (beacon_ies) {
4890 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4895 if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
4896 const struct ieee80211_tim_ie *tim;
4897 tim = (void *)(tim_ie + 2);
4898 ifmgd->dtim_period = tim->dtim_period;
4899 dtim_count = tim->dtim_count;
4901 ifmgd->have_beacon = true;
4902 assoc_data->timeout = jiffies;
4903 assoc_data->timeout_started = true;
4905 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
4906 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
4907 sdata->vif.bss_conf.sync_device_ts =
4908 bss->device_ts_beacon;
4909 sdata->vif.bss_conf.sync_dtim_count = dtim_count;
4912 assoc_data->timeout = jiffies;
4913 assoc_data->timeout_started = true;
4917 run_again(sdata, assoc_data->timeout);
4919 if (bss->corrupt_data) {
4920 char *corrupt_type = "data";
4921 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
4922 if (bss->corrupt_data &
4923 IEEE80211_BSS_CORRUPT_PROBE_RESP)
4924 corrupt_type = "beacon and probe response";
4926 corrupt_type = "beacon";
4927 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
4928 corrupt_type = "probe response";
4929 sdata_info(sdata, "associating with AP with corrupt %s\n",
4935 eth_zero_addr(ifmgd->bssid);
4936 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4937 ifmgd->assoc_data = NULL;
4943 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
4944 struct cfg80211_deauth_request *req)
4946 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4947 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4948 bool tx = !req->local_state_change;
4950 if (ifmgd->auth_data &&
4951 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
4953 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4954 req->bssid, req->reason_code,
4955 ieee80211_get_reason_code_string(req->reason_code));
4957 drv_mgd_prepare_tx(sdata->local, sdata);
4958 ieee80211_send_deauth_disassoc(sdata, req->bssid,
4959 IEEE80211_STYPE_DEAUTH,
4960 req->reason_code, tx,
4962 ieee80211_destroy_auth_data(sdata, false);
4963 ieee80211_report_disconnect(sdata, frame_buf,
4964 sizeof(frame_buf), true,
4970 if (ifmgd->associated &&
4971 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
4973 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4974 req->bssid, req->reason_code,
4975 ieee80211_get_reason_code_string(req->reason_code));
4977 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4978 req->reason_code, tx, frame_buf);
4979 ieee80211_report_disconnect(sdata, frame_buf,
4980 sizeof(frame_buf), true,
4988 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
4989 struct cfg80211_disassoc_request *req)
4991 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4993 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4996 * cfg80211 should catch this ... but it's racy since
4997 * we can receive a disassoc frame, process it, hand it
4998 * to cfg80211 while that's in a locked section already
4999 * trying to tell us that the user wants to disconnect.
5001 if (ifmgd->associated != req->bss)
5005 "disassociating from %pM by local choice (Reason: %u=%s)\n",
5006 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
5008 memcpy(bssid, req->bss->bssid, ETH_ALEN);
5009 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
5010 req->reason_code, !req->local_state_change,
5013 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
5019 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
5021 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5024 * Make sure some work items will not run after this,
5025 * they will not do anything but might not have been
5026 * cancelled when disconnecting.
5028 cancel_work_sync(&ifmgd->monitor_work);
5029 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
5030 cancel_work_sync(&ifmgd->request_smps_work);
5031 cancel_work_sync(&ifmgd->csa_connection_drop_work);
5032 cancel_work_sync(&ifmgd->chswitch_work);
5033 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
5036 if (ifmgd->assoc_data) {
5037 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
5038 ieee80211_destroy_assoc_data(sdata, false);
5039 cfg80211_assoc_timeout(sdata->dev, bss);
5041 if (ifmgd->auth_data)
5042 ieee80211_destroy_auth_data(sdata, false);
5043 spin_lock_bh(&ifmgd->teardown_lock);
5044 if (ifmgd->teardown_skb) {
5045 kfree_skb(ifmgd->teardown_skb);
5046 ifmgd->teardown_skb = NULL;
5047 ifmgd->orig_teardown_skb = NULL;
5049 spin_unlock_bh(&ifmgd->teardown_lock);
5050 del_timer_sync(&ifmgd->timer);
5051 sdata_unlock(sdata);
5054 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
5055 enum nl80211_cqm_rssi_threshold_event rssi_event,
5058 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5060 trace_api_cqm_rssi_notify(sdata, rssi_event);
5062 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp);
5064 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
5066 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
5068 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5070 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
5072 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
5074 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);