2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/delay.h>
16 #include <linux/if_ether.h>
17 #include <linux/skbuff.h>
18 #include <linux/if_arp.h>
19 #include <linux/etherdevice.h>
20 #include <linux/moduleparam.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/pm_qos.h>
23 #include <linux/crc32.h>
24 #include <linux/slab.h>
25 #include <linux/export.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
37 #define IEEE80211_AUTH_MAX_TRIES 3
38 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
39 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
40 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
41 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
42 #define IEEE80211_ASSOC_MAX_TRIES 3
44 static int max_nullfunc_tries = 2;
45 module_param(max_nullfunc_tries, int, 0644);
46 MODULE_PARM_DESC(max_nullfunc_tries,
47 "Maximum nullfunc tx tries before disconnecting (reason 4).");
49 static int max_probe_tries = 5;
50 module_param(max_probe_tries, int, 0644);
51 MODULE_PARM_DESC(max_probe_tries,
52 "Maximum probe tries before disconnecting (reason 4).");
55 * Beacon loss timeout is calculated as N frames times the
56 * advertised beacon interval. This may need to be somewhat
57 * higher than what hardware might detect to account for
58 * delays in the host processing frames. But since we also
59 * probe on beacon miss before declaring the connection lost
60 * default to what we want.
62 static int beacon_loss_count = 7;
63 module_param(beacon_loss_count, int, 0644);
64 MODULE_PARM_DESC(beacon_loss_count,
65 "Number of beacon intervals before we decide beacon was lost.");
68 * Time the connection can be idle before we probe
69 * it to see if we can still talk to the AP.
71 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
73 * Time we wait for a probe response after sending
74 * a probe request because of beacon loss or for
75 * checking the connection still works.
77 static int probe_wait_ms = 500;
78 module_param(probe_wait_ms, int, 0644);
79 MODULE_PARM_DESC(probe_wait_ms,
80 "Maximum time(ms) to wait for probe response"
81 " before disconnecting (reason 4).");
84 * Weight given to the latest Beacon frame when calculating average signal
85 * strength for Beacon frames received in the current BSS. This must be
88 #define IEEE80211_SIGNAL_AVE_WEIGHT 3
91 * How many Beacon frames need to have been used in average signal strength
92 * before starting to indicate signal change events.
94 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
97 * We can have multiple work items (and connection probing)
98 * scheduling this timer, but we need to take care to only
99 * reschedule it when it should fire _earlier_ than it was
100 * asked for before, or if it's not pending right now. This
101 * function ensures that. Note that it then is required to
102 * run this function for all timeouts after the first one
103 * has happened -- the work that runs from this timer will
106 static void run_again(struct ieee80211_sub_if_data *sdata,
107 unsigned long timeout)
109 sdata_assert_lock(sdata);
111 if (!timer_pending(&sdata->u.mgd.timer) ||
112 time_before(timeout, sdata->u.mgd.timer.expires))
113 mod_timer(&sdata->u.mgd.timer, timeout);
116 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
118 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
121 if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
124 mod_timer(&sdata->u.mgd.bcn_mon_timer,
125 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
128 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
130 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
132 if (unlikely(!sdata->u.mgd.associated))
135 ifmgd->probe_send_count = 0;
137 if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
140 mod_timer(&sdata->u.mgd.conn_mon_timer,
141 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
144 static int ecw2cw(int ecw)
146 return (1 << ecw) - 1;
150 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
151 struct ieee80211_supported_band *sband,
152 struct ieee80211_channel *channel,
153 const struct ieee80211_ht_cap *ht_cap,
154 const struct ieee80211_ht_operation *ht_oper,
155 const struct ieee80211_vht_operation *vht_oper,
156 struct cfg80211_chan_def *chandef, bool tracking)
158 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
159 struct cfg80211_chan_def vht_chandef;
162 chandef->chan = channel;
163 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
164 chandef->center_freq1 = channel->center_freq;
165 chandef->center_freq2 = 0;
167 if (!ht_cap || !ht_oper || !sband->ht_cap.ht_supported) {
168 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
172 chandef->width = NL80211_CHAN_WIDTH_20;
174 if (!(ht_cap->cap_info &
175 cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40))) {
176 ret = IEEE80211_STA_DISABLE_40MHZ;
180 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
182 /* check that channel matches the right operating channel */
183 if (!tracking && channel->center_freq != ht_cfreq) {
185 * It's possible that some APs are confused here;
186 * Netgear WNDR3700 sometimes reports 4 higher than
187 * the actual channel in association responses, but
188 * since we look at probe response/beacon data here
192 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
193 channel->center_freq, ht_cfreq,
194 ht_oper->primary_chan, channel->band);
195 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
199 /* check 40 MHz support, if we have it */
200 if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
201 switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
202 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
203 chandef->width = NL80211_CHAN_WIDTH_40;
204 chandef->center_freq1 += 10;
206 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
207 chandef->width = NL80211_CHAN_WIDTH_40;
208 chandef->center_freq1 -= 10;
212 /* 40 MHz (and 80 MHz) must be supported for VHT */
213 ret = IEEE80211_STA_DISABLE_VHT;
214 /* also mark 40 MHz disabled */
215 ret |= IEEE80211_STA_DISABLE_40MHZ;
219 if (!vht_oper || !sband->vht_cap.vht_supported) {
220 ret = IEEE80211_STA_DISABLE_VHT;
224 vht_chandef.chan = channel;
225 vht_chandef.center_freq1 =
226 ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
228 vht_chandef.center_freq2 = 0;
230 switch (vht_oper->chan_width) {
231 case IEEE80211_VHT_CHANWIDTH_USE_HT:
232 vht_chandef.width = chandef->width;
233 vht_chandef.center_freq1 = chandef->center_freq1;
235 case IEEE80211_VHT_CHANWIDTH_80MHZ:
236 vht_chandef.width = NL80211_CHAN_WIDTH_80;
238 case IEEE80211_VHT_CHANWIDTH_160MHZ:
239 vht_chandef.width = NL80211_CHAN_WIDTH_160;
241 case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
242 vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
243 vht_chandef.center_freq2 =
244 ieee80211_channel_to_frequency(
245 vht_oper->center_freq_seg2_idx,
249 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
251 "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
252 vht_oper->chan_width);
253 ret = IEEE80211_STA_DISABLE_VHT;
257 if (!cfg80211_chandef_valid(&vht_chandef)) {
258 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
260 "AP VHT information is invalid, disable VHT\n");
261 ret = IEEE80211_STA_DISABLE_VHT;
265 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
270 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
271 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
273 "AP VHT information doesn't match HT, disable VHT\n");
274 ret = IEEE80211_STA_DISABLE_VHT;
278 *chandef = vht_chandef;
284 * When tracking the current AP, don't do any further checks if the
285 * new chandef is identical to the one we're currently using for the
286 * connection. This keeps us from playing ping-pong with regulatory,
287 * without it the following can happen (for example):
288 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
289 * - AP advertises regdom US
290 * - CRDA loads regdom US with 80 MHz prohibited (old database)
291 * - the code below detects an unsupported channel, downgrades, and
292 * we disconnect from the AP in the caller
293 * - disconnect causes CRDA to reload world regdomain and the game
295 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
297 * It seems possible that there are still scenarios with CSA or real
298 * bandwidth changes where a this could happen, but those cases are
299 * less common and wouldn't completely prevent using the AP.
302 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
305 /* don't print the message below for VHT mismatch if VHT is disabled */
306 if (ret & IEEE80211_STA_DISABLE_VHT)
307 vht_chandef = *chandef;
310 * Ignore the DISABLED flag when we're already connected and only
311 * tracking the APs beacon for bandwidth changes - otherwise we
312 * might get disconnected here if we connect to an AP, update our
313 * regulatory information based on the AP's country IE and the
314 * information we have is wrong/outdated and disables the channel
315 * that we're actually using for the connection to the AP.
317 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
319 IEEE80211_CHAN_DISABLED)) {
320 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
321 ret = IEEE80211_STA_DISABLE_HT |
322 IEEE80211_STA_DISABLE_VHT;
326 ret |= ieee80211_chandef_downgrade(chandef);
329 if (chandef->width != vht_chandef.width && !tracking)
331 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
333 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
337 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
338 struct sta_info *sta,
339 const struct ieee80211_ht_cap *ht_cap,
340 const struct ieee80211_ht_operation *ht_oper,
341 const struct ieee80211_vht_operation *vht_oper,
342 const u8 *bssid, u32 *changed)
344 struct ieee80211_local *local = sdata->local;
345 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
346 struct ieee80211_supported_band *sband;
347 struct ieee80211_channel *chan;
348 struct cfg80211_chan_def chandef;
351 enum ieee80211_sta_rx_bandwidth new_sta_bw;
354 /* if HT was/is disabled, don't track any bandwidth changes */
355 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
358 /* don't check VHT if we associated as non-VHT station */
359 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
362 if (WARN_ON_ONCE(!sta))
366 * if bss configuration changed store the new one -
367 * this may be applicable even if channel is identical
369 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
370 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
371 *changed |= BSS_CHANGED_HT;
372 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
375 chan = sdata->vif.bss_conf.chandef.chan;
376 sband = local->hw.wiphy->bands[chan->band];
378 /* calculate new channel (type) based on HT/VHT operation IEs */
379 flags = ieee80211_determine_chantype(sdata, sband, chan,
380 ht_cap, ht_oper, vht_oper,
384 * Downgrade the new channel if we associated with restricted
385 * capabilities. For example, if we associated as a 20 MHz STA
386 * to a 40 MHz AP (due to regulatory, capabilities or config
387 * reasons) then switching to a 40 MHz channel now won't do us
388 * any good -- we couldn't use it with the AP.
390 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
391 chandef.width == NL80211_CHAN_WIDTH_80P80)
392 flags |= ieee80211_chandef_downgrade(&chandef);
393 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
394 chandef.width == NL80211_CHAN_WIDTH_160)
395 flags |= ieee80211_chandef_downgrade(&chandef);
396 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
397 chandef.width > NL80211_CHAN_WIDTH_20)
398 flags |= ieee80211_chandef_downgrade(&chandef);
400 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
404 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
405 ifmgd->bssid, chandef.chan->center_freq, chandef.width,
406 chandef.center_freq1, chandef.center_freq2);
408 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
409 IEEE80211_STA_DISABLE_VHT |
410 IEEE80211_STA_DISABLE_40MHZ |
411 IEEE80211_STA_DISABLE_80P80MHZ |
412 IEEE80211_STA_DISABLE_160MHZ)) ||
413 !cfg80211_chandef_valid(&chandef)) {
415 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
420 switch (chandef.width) {
421 case NL80211_CHAN_WIDTH_20_NOHT:
422 case NL80211_CHAN_WIDTH_20:
423 new_sta_bw = IEEE80211_STA_RX_BW_20;
425 case NL80211_CHAN_WIDTH_40:
426 new_sta_bw = IEEE80211_STA_RX_BW_40;
428 case NL80211_CHAN_WIDTH_80:
429 new_sta_bw = IEEE80211_STA_RX_BW_80;
431 case NL80211_CHAN_WIDTH_80P80:
432 case NL80211_CHAN_WIDTH_160:
433 new_sta_bw = IEEE80211_STA_RX_BW_160;
439 if (new_sta_bw > sta->cur_max_bandwidth)
440 new_sta_bw = sta->cur_max_bandwidth;
442 if (new_sta_bw < sta->sta.bandwidth) {
443 sta->sta.bandwidth = new_sta_bw;
444 rate_control_rate_update(local, sband, sta,
445 IEEE80211_RC_BW_CHANGED);
448 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
451 "AP %pM changed bandwidth to incompatible one - disconnect\n",
456 if (new_sta_bw > sta->sta.bandwidth) {
457 sta->sta.bandwidth = new_sta_bw;
458 rate_control_rate_update(local, sband, sta,
459 IEEE80211_RC_BW_CHANGED);
465 /* frame sending functions */
467 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
468 struct sk_buff *skb, u8 ap_ht_param,
469 struct ieee80211_supported_band *sband,
470 struct ieee80211_channel *channel,
471 enum ieee80211_smps_mode smps)
474 u32 flags = channel->flags;
476 struct ieee80211_sta_ht_cap ht_cap;
478 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
480 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
481 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
483 /* determine capability flags */
486 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
487 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
488 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
489 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
490 cap &= ~IEEE80211_HT_CAP_SGI_40;
493 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
494 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
495 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
496 cap &= ~IEEE80211_HT_CAP_SGI_40;
502 * If 40 MHz was disabled associate as though we weren't
503 * capable of 40 MHz -- some broken APs will never fall
504 * back to trying to transmit in 20 MHz.
506 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
507 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
508 cap &= ~IEEE80211_HT_CAP_SGI_40;
511 /* set SM PS mode properly */
512 cap &= ~IEEE80211_HT_CAP_SM_PS;
514 case IEEE80211_SMPS_AUTOMATIC:
515 case IEEE80211_SMPS_NUM_MODES:
517 case IEEE80211_SMPS_OFF:
518 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
519 IEEE80211_HT_CAP_SM_PS_SHIFT;
521 case IEEE80211_SMPS_STATIC:
522 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
523 IEEE80211_HT_CAP_SM_PS_SHIFT;
525 case IEEE80211_SMPS_DYNAMIC:
526 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
527 IEEE80211_HT_CAP_SM_PS_SHIFT;
531 /* reserve and fill IE */
532 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
533 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
536 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
538 struct ieee80211_supported_band *sband,
539 struct ieee80211_vht_cap *ap_vht_cap)
543 struct ieee80211_sta_vht_cap vht_cap;
544 u32 mask, ap_bf_sts, our_bf_sts;
546 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
548 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
549 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
551 /* determine capability flags */
554 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
555 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ;
556 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
559 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
560 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
561 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
565 * Some APs apparently get confused if our capabilities are better
566 * than theirs, so restrict what we advertise in the assoc request.
568 if (!(ap_vht_cap->vht_cap_info &
569 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
570 cap &= ~IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
572 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
574 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
575 our_bf_sts = cap & mask;
577 if (ap_bf_sts < our_bf_sts) {
582 /* reserve and fill IE */
583 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
584 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
587 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
589 struct ieee80211_local *local = sdata->local;
590 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
591 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
593 struct ieee80211_mgmt *mgmt;
595 size_t offset = 0, noffset;
596 int i, count, rates_len, supp_rates_len, shift;
598 struct ieee80211_supported_band *sband;
599 struct ieee80211_chanctx_conf *chanctx_conf;
600 struct ieee80211_channel *chan;
601 u32 rate_flags, rates = 0;
603 sdata_assert_lock(sdata);
606 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
607 if (WARN_ON(!chanctx_conf)) {
611 chan = chanctx_conf->def.chan;
612 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
614 sband = local->hw.wiphy->bands[chan->band];
615 shift = ieee80211_vif_get_shift(&sdata->vif);
617 if (assoc_data->supp_rates_len) {
619 * Get all rates supported by the device and the AP as
620 * some APs don't like getting a superset of their rates
621 * in the association request (e.g. D-Link DAP 1353 in
624 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
625 assoc_data->supp_rates,
626 assoc_data->supp_rates_len,
630 * In case AP not provide any supported rates information
631 * before association, we send information element(s) with
632 * all rates that we support.
635 for (i = 0; i < sband->n_bitrates; i++) {
636 if ((rate_flags & sband->bitrates[i].flags)
644 skb = alloc_skb(local->hw.extra_tx_headroom +
645 sizeof(*mgmt) + /* bit too much but doesn't matter */
646 2 + assoc_data->ssid_len + /* SSID */
647 4 + rates_len + /* (extended) rates */
648 4 + /* power capability */
649 2 + 2 * sband->n_channels + /* supported channels */
650 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
651 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
652 assoc_data->ie_len + /* extra IEs */
658 skb_reserve(skb, local->hw.extra_tx_headroom);
660 capab = WLAN_CAPABILITY_ESS;
662 if (sband->band == IEEE80211_BAND_2GHZ) {
663 if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_SLOT_INCAPABLE))
664 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
665 if (!(local->hw.flags & IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE))
666 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
669 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
670 capab |= WLAN_CAPABILITY_PRIVACY;
672 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
673 (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
674 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
676 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
677 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
679 mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
681 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
682 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
683 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
685 if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
687 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
688 IEEE80211_STYPE_REASSOC_REQ);
689 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
690 mgmt->u.reassoc_req.listen_interval =
691 cpu_to_le16(local->hw.conf.listen_interval);
692 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
696 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
697 IEEE80211_STYPE_ASSOC_REQ);
698 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
699 mgmt->u.assoc_req.listen_interval =
700 cpu_to_le16(local->hw.conf.listen_interval);
704 pos = skb_put(skb, 2 + assoc_data->ssid_len);
705 *pos++ = WLAN_EID_SSID;
706 *pos++ = assoc_data->ssid_len;
707 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
709 /* add all rates which were marked to be used above */
710 supp_rates_len = rates_len;
711 if (supp_rates_len > 8)
714 pos = skb_put(skb, supp_rates_len + 2);
715 *pos++ = WLAN_EID_SUPP_RATES;
716 *pos++ = supp_rates_len;
719 for (i = 0; i < sband->n_bitrates; i++) {
720 if (BIT(i) & rates) {
721 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
729 if (rates_len > count) {
730 pos = skb_put(skb, rates_len - count + 2);
731 *pos++ = WLAN_EID_EXT_SUPP_RATES;
732 *pos++ = rates_len - count;
734 for (i++; i < sband->n_bitrates; i++) {
735 if (BIT(i) & rates) {
737 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
744 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
745 capab & WLAN_CAPABILITY_RADIO_MEASURE) {
746 pos = skb_put(skb, 4);
747 *pos++ = WLAN_EID_PWR_CAPABILITY;
749 *pos++ = 0; /* min tx power */
751 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
754 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
755 /* TODO: get this in reg domain format */
756 pos = skb_put(skb, 2 * sband->n_channels + 2);
757 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
758 *pos++ = 2 * sband->n_channels;
759 for (i = 0; i < sband->n_channels; i++) {
760 *pos++ = ieee80211_frequency_to_channel(
761 sband->channels[i].center_freq);
762 *pos++ = 1; /* one channel in the subband*/
766 /* if present, add any custom IEs that go before HT */
767 if (assoc_data->ie_len) {
768 static const u8 before_ht[] = {
771 WLAN_EID_EXT_SUPP_RATES,
772 WLAN_EID_PWR_CAPABILITY,
773 WLAN_EID_SUPPORTED_CHANNELS,
776 WLAN_EID_RRM_ENABLED_CAPABILITIES,
777 WLAN_EID_MOBILITY_DOMAIN,
778 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
780 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
781 before_ht, ARRAY_SIZE(before_ht),
783 pos = skb_put(skb, noffset - offset);
784 memcpy(pos, assoc_data->ie + offset, noffset - offset);
788 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
789 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
790 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
792 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
793 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
794 sband, chan, sdata->smps_mode);
796 /* if present, add any custom IEs that go before VHT */
797 if (assoc_data->ie_len) {
798 static const u8 before_vht[] = {
801 WLAN_EID_EXT_SUPP_RATES,
802 WLAN_EID_PWR_CAPABILITY,
803 WLAN_EID_SUPPORTED_CHANNELS,
806 WLAN_EID_RRM_ENABLED_CAPABILITIES,
807 WLAN_EID_MOBILITY_DOMAIN,
808 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
809 WLAN_EID_HT_CAPABILITY,
810 WLAN_EID_BSS_COEX_2040,
811 WLAN_EID_EXT_CAPABILITY,
812 WLAN_EID_QOS_TRAFFIC_CAPA,
813 WLAN_EID_TIM_BCAST_REQ,
814 WLAN_EID_INTERWORKING,
816 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
817 before_vht, ARRAY_SIZE(before_vht),
819 pos = skb_put(skb, noffset - offset);
820 memcpy(pos, assoc_data->ie + offset, noffset - offset);
824 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
825 ieee80211_add_vht_ie(sdata, skb, sband,
826 &assoc_data->ap_vht_cap);
828 /* if present, add any custom non-vendor IEs that go after HT */
829 if (assoc_data->ie_len) {
830 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
833 pos = skb_put(skb, noffset - offset);
834 memcpy(pos, assoc_data->ie + offset, noffset - offset);
838 if (assoc_data->wmm) {
839 if (assoc_data->uapsd) {
840 qos_info = ifmgd->uapsd_queues;
841 qos_info |= (ifmgd->uapsd_max_sp_len <<
842 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
847 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
850 /* add any remaining custom (i.e. vendor specific here) IEs */
851 if (assoc_data->ie_len) {
852 noffset = assoc_data->ie_len;
853 pos = skb_put(skb, noffset - offset);
854 memcpy(pos, assoc_data->ie + offset, noffset - offset);
857 drv_mgd_prepare_tx(local, sdata);
859 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
860 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
861 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
862 IEEE80211_TX_INTFL_MLME_CONN_TX;
863 ieee80211_tx_skb(sdata, skb);
866 void ieee80211_send_pspoll(struct ieee80211_local *local,
867 struct ieee80211_sub_if_data *sdata)
869 struct ieee80211_pspoll *pspoll;
872 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
876 pspoll = (struct ieee80211_pspoll *) skb->data;
877 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
879 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
880 ieee80211_tx_skb(sdata, skb);
883 void ieee80211_send_nullfunc(struct ieee80211_local *local,
884 struct ieee80211_sub_if_data *sdata,
888 struct ieee80211_hdr_3addr *nullfunc;
889 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
891 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
895 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
897 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
899 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
900 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
902 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
903 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
905 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
906 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
908 ieee80211_tx_skb(sdata, skb);
911 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
912 struct ieee80211_sub_if_data *sdata)
915 struct ieee80211_hdr *nullfunc;
918 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
921 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
925 skb_reserve(skb, local->hw.extra_tx_headroom);
927 nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
928 memset(nullfunc, 0, 30);
929 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
930 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
931 nullfunc->frame_control = fc;
932 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
933 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
934 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
935 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
937 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
938 ieee80211_tx_skb(sdata, skb);
941 /* spectrum management related things */
942 static void ieee80211_chswitch_work(struct work_struct *work)
944 struct ieee80211_sub_if_data *sdata =
945 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
946 struct ieee80211_local *local = sdata->local;
947 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
950 if (!ieee80211_sdata_running(sdata))
954 mutex_lock(&local->mtx);
955 mutex_lock(&local->chanctx_mtx);
957 if (!ifmgd->associated)
960 if (!sdata->vif.csa_active)
964 * using reservation isn't immediate as it may be deferred until later
965 * with multi-vif. once reservation is complete it will re-schedule the
966 * work with no reserved_chanctx so verify chandef to check if it
967 * completed successfully
970 if (sdata->reserved_chanctx) {
972 * with multi-vif csa driver may call ieee80211_csa_finish()
973 * many times while waiting for other interfaces to use their
976 if (sdata->reserved_ready)
979 ret = ieee80211_vif_use_reserved_context(sdata);
982 "failed to use reserved channel context, disconnecting (err=%d)\n",
984 ieee80211_queue_work(&sdata->local->hw,
985 &ifmgd->csa_connection_drop_work);
992 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
993 &sdata->csa_chandef)) {
995 "failed to finalize channel switch, disconnecting\n");
996 ieee80211_queue_work(&sdata->local->hw,
997 &ifmgd->csa_connection_drop_work);
1001 /* XXX: shouldn't really modify cfg80211-owned data! */
1002 ifmgd->associated->channel = sdata->csa_chandef.chan;
1004 sdata->vif.csa_active = false;
1006 /* XXX: wait for a beacon first? */
1007 if (sdata->csa_block_tx) {
1008 ieee80211_wake_vif_queues(local, sdata,
1009 IEEE80211_QUEUE_STOP_REASON_CSA);
1010 sdata->csa_block_tx = false;
1013 ieee80211_sta_reset_beacon_monitor(sdata);
1014 ieee80211_sta_reset_conn_monitor(sdata);
1017 mutex_unlock(&local->chanctx_mtx);
1018 mutex_unlock(&local->mtx);
1019 sdata_unlock(sdata);
1022 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1024 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1025 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1027 trace_api_chswitch_done(sdata, success);
1030 "driver channel switch failed, disconnecting\n");
1031 ieee80211_queue_work(&sdata->local->hw,
1032 &ifmgd->csa_connection_drop_work);
1034 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1037 EXPORT_SYMBOL(ieee80211_chswitch_done);
1039 static void ieee80211_chswitch_timer(unsigned long data)
1041 struct ieee80211_sub_if_data *sdata =
1042 (struct ieee80211_sub_if_data *) data;
1044 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1048 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1049 u64 timestamp, struct ieee802_11_elems *elems,
1052 struct ieee80211_local *local = sdata->local;
1053 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1054 struct cfg80211_bss *cbss = ifmgd->associated;
1055 struct ieee80211_chanctx_conf *conf;
1056 struct ieee80211_chanctx *chanctx;
1057 enum ieee80211_band current_band;
1058 struct ieee80211_csa_ie csa_ie;
1061 sdata_assert_lock(sdata);
1066 if (local->scanning)
1069 /* disregard subsequent announcements if we are already processing */
1070 if (sdata->vif.csa_active)
1073 current_band = cbss->channel->band;
1074 memset(&csa_ie, 0, sizeof(csa_ie));
1075 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1077 ifmgd->associated->bssid, &csa_ie);
1079 ieee80211_queue_work(&local->hw,
1080 &ifmgd->csa_connection_drop_work);
1084 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1085 IEEE80211_CHAN_DISABLED)) {
1087 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1088 ifmgd->associated->bssid,
1089 csa_ie.chandef.chan->center_freq,
1090 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1091 csa_ie.chandef.center_freq2);
1092 ieee80211_queue_work(&local->hw,
1093 &ifmgd->csa_connection_drop_work);
1097 mutex_lock(&local->mtx);
1098 mutex_lock(&local->chanctx_mtx);
1099 conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1100 lockdep_is_held(&local->chanctx_mtx));
1103 "no channel context assigned to vif?, disconnecting\n");
1104 ieee80211_queue_work(&local->hw,
1105 &ifmgd->csa_connection_drop_work);
1106 mutex_unlock(&local->chanctx_mtx);
1107 mutex_unlock(&local->mtx);
1111 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1113 if (local->use_chanctx) {
1114 u32 num_chanctx = 0;
1115 list_for_each_entry(chanctx, &local->chanctx_list, list)
1118 if (num_chanctx > 1 ||
1119 !(local->hw.flags & IEEE80211_HW_CHANCTX_STA_CSA)) {
1121 "not handling chan-switch with channel contexts\n");
1122 ieee80211_queue_work(&local->hw,
1123 &ifmgd->csa_connection_drop_work);
1124 mutex_unlock(&local->chanctx_mtx);
1125 mutex_unlock(&local->mtx);
1130 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1131 chanctx->mode, false);
1134 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1136 ieee80211_queue_work(&local->hw,
1137 &ifmgd->csa_connection_drop_work);
1138 mutex_unlock(&local->chanctx_mtx);
1139 mutex_unlock(&local->mtx);
1142 mutex_unlock(&local->chanctx_mtx);
1144 sdata->vif.csa_active = true;
1145 sdata->csa_chandef = csa_ie.chandef;
1146 sdata->csa_block_tx = csa_ie.mode;
1148 if (sdata->csa_block_tx)
1149 ieee80211_stop_vif_queues(local, sdata,
1150 IEEE80211_QUEUE_STOP_REASON_CSA);
1151 mutex_unlock(&local->mtx);
1153 if (local->ops->channel_switch) {
1154 /* use driver's channel switch callback */
1155 struct ieee80211_channel_switch ch_switch = {
1156 .timestamp = timestamp,
1157 .block_tx = csa_ie.mode,
1158 .chandef = csa_ie.chandef,
1159 .count = csa_ie.count,
1162 drv_channel_switch(local, &ch_switch);
1166 /* channel switch handled in software */
1167 if (csa_ie.count <= 1)
1168 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1170 mod_timer(&ifmgd->chswitch_timer,
1171 TU_TO_EXP_TIME((csa_ie.count - 1) *
1172 cbss->beacon_interval));
1176 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1177 struct ieee80211_channel *channel,
1178 const u8 *country_ie, u8 country_ie_len,
1179 const u8 *pwr_constr_elem,
1180 int *chan_pwr, int *pwr_reduction)
1182 struct ieee80211_country_ie_triplet *triplet;
1183 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1184 int i, chan_increment;
1185 bool have_chan_pwr = false;
1188 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1191 triplet = (void *)(country_ie + 3);
1192 country_ie_len -= 3;
1194 switch (channel->band) {
1198 case IEEE80211_BAND_2GHZ:
1199 case IEEE80211_BAND_60GHZ:
1202 case IEEE80211_BAND_5GHZ:
1208 while (country_ie_len >= 3) {
1209 u8 first_channel = triplet->chans.first_channel;
1211 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1214 for (i = 0; i < triplet->chans.num_channels; i++) {
1215 if (first_channel + i * chan_increment == chan) {
1216 have_chan_pwr = true;
1217 *chan_pwr = triplet->chans.max_power;
1226 country_ie_len -= 3;
1230 *pwr_reduction = *pwr_constr_elem;
1231 return have_chan_pwr;
1234 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1235 struct ieee80211_channel *channel,
1236 const u8 *cisco_dtpc_ie,
1239 /* From practical testing, the first data byte of the DTPC element
1240 * seems to contain the requested dBm level, and the CLI on Cisco
1241 * APs clearly state the range is -127 to 127 dBm, which indicates
1242 * a signed byte, although it seemingly never actually goes negative.
1243 * The other byte seems to always be zero.
1245 *pwr_level = (__s8)cisco_dtpc_ie[4];
1248 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1249 struct ieee80211_channel *channel,
1250 struct ieee80211_mgmt *mgmt,
1251 const u8 *country_ie, u8 country_ie_len,
1252 const u8 *pwr_constr_ie,
1253 const u8 *cisco_dtpc_ie)
1255 bool has_80211h_pwr = false, has_cisco_pwr = false;
1256 int chan_pwr = 0, pwr_reduction_80211h = 0;
1257 int pwr_level_cisco, pwr_level_80211h;
1260 if (country_ie && pwr_constr_ie &&
1261 mgmt->u.probe_resp.capab_info &
1262 cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT)) {
1263 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1264 sdata, channel, country_ie, country_ie_len,
1265 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1267 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1270 if (cisco_dtpc_ie) {
1271 ieee80211_find_cisco_dtpc(
1272 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1273 has_cisco_pwr = true;
1276 if (!has_80211h_pwr && !has_cisco_pwr)
1279 /* If we have both 802.11h and Cisco DTPC, apply both limits
1280 * by picking the smallest of the two power levels advertised.
1282 if (has_80211h_pwr &&
1283 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1285 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1286 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1287 sdata->u.mgd.bssid);
1288 new_ap_level = pwr_level_80211h;
1289 } else { /* has_cisco_pwr is always true here. */
1291 "Limiting TX power to %d dBm as advertised by %pM\n",
1292 pwr_level_cisco, sdata->u.mgd.bssid);
1293 new_ap_level = pwr_level_cisco;
1296 if (sdata->ap_power_level == new_ap_level)
1299 sdata->ap_power_level = new_ap_level;
1300 if (__ieee80211_recalc_txpower(sdata))
1301 return BSS_CHANGED_TXPOWER;
1306 static void ieee80211_enable_ps(struct ieee80211_local *local,
1307 struct ieee80211_sub_if_data *sdata)
1309 struct ieee80211_conf *conf = &local->hw.conf;
1312 * If we are scanning right now then the parameters will
1313 * take effect when scan finishes.
1315 if (local->scanning)
1318 if (conf->dynamic_ps_timeout > 0 &&
1319 !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
1320 mod_timer(&local->dynamic_ps_timer, jiffies +
1321 msecs_to_jiffies(conf->dynamic_ps_timeout));
1323 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
1324 ieee80211_send_nullfunc(local, sdata, 1);
1326 if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
1327 (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
1330 conf->flags |= IEEE80211_CONF_PS;
1331 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1335 static void ieee80211_change_ps(struct ieee80211_local *local)
1337 struct ieee80211_conf *conf = &local->hw.conf;
1339 if (local->ps_sdata) {
1340 ieee80211_enable_ps(local, local->ps_sdata);
1341 } else if (conf->flags & IEEE80211_CONF_PS) {
1342 conf->flags &= ~IEEE80211_CONF_PS;
1343 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1344 del_timer_sync(&local->dynamic_ps_timer);
1345 cancel_work_sync(&local->dynamic_ps_enable_work);
1349 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1351 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1352 struct sta_info *sta = NULL;
1353 bool authorized = false;
1355 if (!mgd->powersave)
1361 if (!mgd->associated)
1364 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1367 if (!mgd->have_beacon)
1371 sta = sta_info_get(sdata, mgd->bssid);
1373 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1379 /* need to hold RTNL or interface lock */
1380 void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
1382 struct ieee80211_sub_if_data *sdata, *found = NULL;
1386 if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) {
1387 local->ps_sdata = NULL;
1391 list_for_each_entry(sdata, &local->interfaces, list) {
1392 if (!ieee80211_sdata_running(sdata))
1394 if (sdata->vif.type == NL80211_IFTYPE_AP) {
1395 /* If an AP vif is found, then disable PS
1396 * by setting the count to zero thereby setting
1402 if (sdata->vif.type != NL80211_IFTYPE_STATION)
1408 if (count == 1 && ieee80211_powersave_allowed(found)) {
1412 latency = pm_qos_request(PM_QOS_NETWORK_LATENCY);
1414 beaconint_us = ieee80211_tu_to_usec(
1415 found->vif.bss_conf.beacon_int);
1417 timeout = local->dynamic_ps_forced_timeout;
1420 * Go to full PSM if the user configures a very low
1421 * latency requirement.
1422 * The 2000 second value is there for compatibility
1423 * until the PM_QOS_NETWORK_LATENCY is configured
1426 if (latency > (1900 * USEC_PER_MSEC) &&
1427 latency != (2000 * USEC_PER_SEC))
1432 local->hw.conf.dynamic_ps_timeout = timeout;
1434 if (beaconint_us > latency) {
1435 local->ps_sdata = NULL;
1438 u8 dtimper = found->u.mgd.dtim_period;
1440 /* If the TIM IE is invalid, pretend the value is 1 */
1443 else if (dtimper > 1)
1444 maxslp = min_t(int, dtimper,
1445 latency / beaconint_us);
1447 local->hw.conf.max_sleep_period = maxslp;
1448 local->hw.conf.ps_dtim_period = dtimper;
1449 local->ps_sdata = found;
1452 local->ps_sdata = NULL;
1455 ieee80211_change_ps(local);
1458 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1460 bool ps_allowed = ieee80211_powersave_allowed(sdata);
1462 if (sdata->vif.bss_conf.ps != ps_allowed) {
1463 sdata->vif.bss_conf.ps = ps_allowed;
1464 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1468 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1470 struct ieee80211_local *local =
1471 container_of(work, struct ieee80211_local,
1472 dynamic_ps_disable_work);
1474 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1475 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1476 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1479 ieee80211_wake_queues_by_reason(&local->hw,
1480 IEEE80211_MAX_QUEUE_MAP,
1481 IEEE80211_QUEUE_STOP_REASON_PS,
1485 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1487 struct ieee80211_local *local =
1488 container_of(work, struct ieee80211_local,
1489 dynamic_ps_enable_work);
1490 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1491 struct ieee80211_if_managed *ifmgd;
1492 unsigned long flags;
1495 /* can only happen when PS was just disabled anyway */
1499 ifmgd = &sdata->u.mgd;
1501 if (local->hw.conf.flags & IEEE80211_CONF_PS)
1504 if (local->hw.conf.dynamic_ps_timeout > 0) {
1505 /* don't enter PS if TX frames are pending */
1506 if (drv_tx_frames_pending(local)) {
1507 mod_timer(&local->dynamic_ps_timer, jiffies +
1509 local->hw.conf.dynamic_ps_timeout));
1514 * transmission can be stopped by others which leads to
1515 * dynamic_ps_timer expiry. Postpone the ps timer if it
1516 * is not the actual idle state.
1518 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1519 for (q = 0; q < local->hw.queues; q++) {
1520 if (local->queue_stop_reasons[q]) {
1521 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1523 mod_timer(&local->dynamic_ps_timer, jiffies +
1525 local->hw.conf.dynamic_ps_timeout));
1529 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1532 if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
1533 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1534 if (drv_tx_frames_pending(local)) {
1535 mod_timer(&local->dynamic_ps_timer, jiffies +
1537 local->hw.conf.dynamic_ps_timeout));
1539 ieee80211_send_nullfunc(local, sdata, 1);
1540 /* Flush to get the tx status of nullfunc frame */
1541 ieee80211_flush_queues(local, sdata);
1545 if (!((local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
1546 (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) ||
1547 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1548 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1549 local->hw.conf.flags |= IEEE80211_CONF_PS;
1550 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1554 void ieee80211_dynamic_ps_timer(unsigned long data)
1556 struct ieee80211_local *local = (void *) data;
1558 if (local->quiescing || local->suspended)
1561 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1564 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1566 struct delayed_work *delayed_work =
1567 container_of(work, struct delayed_work, work);
1568 struct ieee80211_sub_if_data *sdata =
1569 container_of(delayed_work, struct ieee80211_sub_if_data,
1570 dfs_cac_timer_work);
1571 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1573 mutex_lock(&sdata->local->mtx);
1574 if (sdata->wdev.cac_started) {
1575 ieee80211_vif_release_channel(sdata);
1576 cfg80211_cac_event(sdata->dev, &chandef,
1577 NL80211_RADAR_CAC_FINISHED,
1580 mutex_unlock(&sdata->local->mtx);
1584 static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
1585 struct ieee80211_sub_if_data *sdata,
1586 const u8 *wmm_param, size_t wmm_param_len)
1588 struct ieee80211_tx_queue_params params;
1589 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1593 u8 uapsd_queues = 0;
1595 if (!local->ops->conf_tx)
1598 if (local->hw.queues < IEEE80211_NUM_ACS)
1604 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
1607 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
1608 uapsd_queues = ifmgd->uapsd_queues;
1610 count = wmm_param[6] & 0x0f;
1611 if (count == ifmgd->wmm_last_param_set)
1613 ifmgd->wmm_last_param_set = count;
1615 pos = wmm_param + 8;
1616 left = wmm_param_len - 8;
1618 memset(¶ms, 0, sizeof(params));
1621 for (; left >= 4; left -= 4, pos += 4) {
1622 int aci = (pos[0] >> 5) & 0x03;
1623 int acm = (pos[0] >> 4) & 0x01;
1631 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
1632 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
1638 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
1639 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
1645 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
1646 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
1653 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
1654 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
1659 params.aifs = pos[0] & 0x0f;
1660 params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
1661 params.cw_min = ecw2cw(pos[1] & 0x0f);
1662 params.txop = get_unaligned_le16(pos + 2);
1664 params.uapsd = uapsd;
1667 "WMM queue=%d aci=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
1669 params.aifs, params.cw_min, params.cw_max,
1670 params.txop, params.uapsd);
1671 sdata->tx_conf[queue] = params;
1672 if (drv_conf_tx(local, sdata, queue, ¶ms))
1674 "failed to set TX queue parameters for queue %d\n",
1678 /* enable WMM or activate new settings */
1679 sdata->vif.bss_conf.qos = true;
1683 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1685 lockdep_assert_held(&sdata->local->mtx);
1687 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
1688 ieee80211_run_deferred_scan(sdata->local);
1691 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1693 mutex_lock(&sdata->local->mtx);
1694 __ieee80211_stop_poll(sdata);
1695 mutex_unlock(&sdata->local->mtx);
1698 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
1699 u16 capab, bool erp_valid, u8 erp)
1701 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1703 bool use_protection;
1704 bool use_short_preamble;
1705 bool use_short_slot;
1708 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
1709 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
1711 use_protection = false;
1712 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
1715 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
1716 if (ieee80211_get_sdata_band(sdata) == IEEE80211_BAND_5GHZ)
1717 use_short_slot = true;
1719 if (use_protection != bss_conf->use_cts_prot) {
1720 bss_conf->use_cts_prot = use_protection;
1721 changed |= BSS_CHANGED_ERP_CTS_PROT;
1724 if (use_short_preamble != bss_conf->use_short_preamble) {
1725 bss_conf->use_short_preamble = use_short_preamble;
1726 changed |= BSS_CHANGED_ERP_PREAMBLE;
1729 if (use_short_slot != bss_conf->use_short_slot) {
1730 bss_conf->use_short_slot = use_short_slot;
1731 changed |= BSS_CHANGED_ERP_SLOT;
1737 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
1738 struct cfg80211_bss *cbss,
1739 u32 bss_info_changed)
1741 struct ieee80211_bss *bss = (void *)cbss->priv;
1742 struct ieee80211_local *local = sdata->local;
1743 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1745 bss_info_changed |= BSS_CHANGED_ASSOC;
1746 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
1747 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
1749 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
1750 beacon_loss_count * bss_conf->beacon_int));
1752 sdata->u.mgd.associated = cbss;
1753 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
1755 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
1757 if (sdata->vif.p2p) {
1758 const struct cfg80211_bss_ies *ies;
1761 ies = rcu_dereference(cbss->ies);
1765 ret = cfg80211_get_p2p_attr(
1766 ies->data, ies->len,
1767 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
1768 (u8 *) &bss_conf->p2p_noa_attr,
1769 sizeof(bss_conf->p2p_noa_attr));
1771 sdata->u.mgd.p2p_noa_index =
1772 bss_conf->p2p_noa_attr.index;
1773 bss_info_changed |= BSS_CHANGED_P2P_PS;
1779 /* just to be sure */
1780 ieee80211_stop_poll(sdata);
1782 ieee80211_led_assoc(local, 1);
1784 if (sdata->u.mgd.have_beacon) {
1786 * If the AP is buggy we may get here with no DTIM period
1787 * known, so assume it's 1 which is the only safe assumption
1788 * in that case, although if the TIM IE is broken powersave
1789 * probably just won't work at all.
1791 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
1792 bss_conf->beacon_rate = bss->beacon_rate;
1793 bss_info_changed |= BSS_CHANGED_BEACON_INFO;
1795 bss_conf->beacon_rate = NULL;
1796 bss_conf->dtim_period = 0;
1799 bss_conf->assoc = 1;
1801 /* Tell the driver to monitor connection quality (if supported) */
1802 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
1803 bss_conf->cqm_rssi_thold)
1804 bss_info_changed |= BSS_CHANGED_CQM;
1806 /* Enable ARP filtering */
1807 if (bss_conf->arp_addr_cnt)
1808 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
1810 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
1812 mutex_lock(&local->iflist_mtx);
1813 ieee80211_recalc_ps(local, -1);
1814 mutex_unlock(&local->iflist_mtx);
1816 ieee80211_recalc_smps(sdata);
1817 ieee80211_recalc_ps_vif(sdata);
1819 netif_carrier_on(sdata->dev);
1822 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
1823 u16 stype, u16 reason, bool tx,
1826 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1827 struct ieee80211_local *local = sdata->local;
1830 sdata_assert_lock(sdata);
1832 if (WARN_ON_ONCE(tx && !frame_buf))
1835 if (WARN_ON(!ifmgd->associated))
1838 ieee80211_stop_poll(sdata);
1840 ifmgd->associated = NULL;
1841 netif_carrier_off(sdata->dev);
1844 * if we want to get out of ps before disassoc (why?) we have
1845 * to do it before sending disassoc, as otherwise the null-packet
1848 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1849 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1850 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1852 local->ps_sdata = NULL;
1854 /* disable per-vif ps */
1855 ieee80211_recalc_ps_vif(sdata);
1857 /* flush out any pending frame (e.g. DELBA) before deauth/disassoc */
1859 ieee80211_flush_queues(local, sdata);
1861 /* deauthenticate/disassociate now */
1862 if (tx || frame_buf)
1863 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
1864 reason, tx, frame_buf);
1866 /* flush out frame */
1868 ieee80211_flush_queues(local, sdata);
1870 /* clear bssid only after building the needed mgmt frames */
1871 memset(ifmgd->bssid, 0, ETH_ALEN);
1873 /* remove AP and TDLS peers */
1874 sta_info_flush(sdata);
1876 /* finally reset all BSS / config parameters */
1877 changed |= ieee80211_reset_erp_info(sdata);
1879 ieee80211_led_assoc(local, 0);
1880 changed |= BSS_CHANGED_ASSOC;
1881 sdata->vif.bss_conf.assoc = false;
1883 ifmgd->p2p_noa_index = -1;
1884 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
1885 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
1887 /* on the next assoc, re-program HT/VHT parameters */
1888 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
1889 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
1890 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
1891 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
1893 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
1895 del_timer_sync(&local->dynamic_ps_timer);
1896 cancel_work_sync(&local->dynamic_ps_enable_work);
1898 /* Disable ARP filtering */
1899 if (sdata->vif.bss_conf.arp_addr_cnt)
1900 changed |= BSS_CHANGED_ARP_FILTER;
1902 sdata->vif.bss_conf.qos = false;
1903 changed |= BSS_CHANGED_QOS;
1905 /* The BSSID (not really interesting) and HT changed */
1906 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
1907 ieee80211_bss_info_change_notify(sdata, changed);
1909 /* disassociated - set to defaults now */
1910 ieee80211_set_wmm_default(sdata, false);
1912 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
1913 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
1914 del_timer_sync(&sdata->u.mgd.timer);
1915 del_timer_sync(&sdata->u.mgd.chswitch_timer);
1917 sdata->vif.bss_conf.dtim_period = 0;
1918 sdata->vif.bss_conf.beacon_rate = NULL;
1920 ifmgd->have_beacon = false;
1923 mutex_lock(&local->mtx);
1924 ieee80211_vif_release_channel(sdata);
1926 sdata->vif.csa_active = false;
1927 if (sdata->csa_block_tx) {
1928 ieee80211_wake_vif_queues(local, sdata,
1929 IEEE80211_QUEUE_STOP_REASON_CSA);
1930 sdata->csa_block_tx = false;
1932 mutex_unlock(&local->mtx);
1934 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
1937 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
1938 struct ieee80211_hdr *hdr)
1941 * We can postpone the mgd.timer whenever receiving unicast frames
1942 * from AP because we know that the connection is working both ways
1943 * at that time. But multicast frames (and hence also beacons) must
1944 * be ignored here, because we need to trigger the timer during
1945 * data idle periods for sending the periodic probe request to the
1946 * AP we're connected to.
1948 if (is_multicast_ether_addr(hdr->addr1))
1951 ieee80211_sta_reset_conn_monitor(sdata);
1954 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
1956 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1957 struct ieee80211_local *local = sdata->local;
1959 mutex_lock(&local->mtx);
1960 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
1963 __ieee80211_stop_poll(sdata);
1965 mutex_lock(&local->iflist_mtx);
1966 ieee80211_recalc_ps(local, -1);
1967 mutex_unlock(&local->iflist_mtx);
1969 if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
1973 * We've received a probe response, but are not sure whether
1974 * we have or will be receiving any beacons or data, so let's
1975 * schedule the timers again, just in case.
1977 ieee80211_sta_reset_beacon_monitor(sdata);
1979 mod_timer(&ifmgd->conn_mon_timer,
1980 round_jiffies_up(jiffies +
1981 IEEE80211_CONNECTION_IDLE_TIME));
1983 mutex_unlock(&local->mtx);
1986 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
1987 struct ieee80211_hdr *hdr, bool ack)
1989 if (!ieee80211_is_data(hdr->frame_control))
1992 if (ieee80211_is_nullfunc(hdr->frame_control) &&
1993 sdata->u.mgd.probe_send_count > 0) {
1995 ieee80211_sta_reset_conn_monitor(sdata);
1997 sdata->u.mgd.nullfunc_failed = true;
1998 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2003 ieee80211_sta_reset_conn_monitor(sdata);
2006 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2008 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2010 u8 *dst = ifmgd->associated->bssid;
2011 u8 unicast_limit = max(1, max_probe_tries - 3);
2014 * Try sending broadcast probe requests for the last three
2015 * probe requests after the first ones failed since some
2016 * buggy APs only support broadcast probe requests.
2018 if (ifmgd->probe_send_count >= unicast_limit)
2022 * When the hardware reports an accurate Tx ACK status, it's
2023 * better to send a nullfunc frame instead of a probe request,
2024 * as it will kick us off the AP quickly if we aren't associated
2025 * anymore. The timeout will be reset if the frame is ACKed by
2028 ifmgd->probe_send_count++;
2030 if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
2031 ifmgd->nullfunc_failed = false;
2032 ieee80211_send_nullfunc(sdata->local, sdata, 0);
2037 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2038 if (WARN_ON_ONCE(ssid == NULL))
2043 ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid_len, NULL,
2044 0, (u32) -1, true, 0,
2045 ifmgd->associated->channel, false);
2049 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2050 run_again(sdata, ifmgd->probe_timeout);
2051 if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
2052 ieee80211_flush_queues(sdata->local, sdata);
2055 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2058 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2059 bool already = false;
2061 if (!ieee80211_sdata_running(sdata))
2066 if (!ifmgd->associated)
2069 mutex_lock(&sdata->local->mtx);
2071 if (sdata->local->tmp_channel || sdata->local->scanning) {
2072 mutex_unlock(&sdata->local->mtx);
2077 mlme_dbg_ratelimited(sdata,
2078 "detected beacon loss from AP (missed %d beacons) - probing\n",
2081 ieee80211_cqm_rssi_notify(&sdata->vif,
2082 NL80211_CQM_RSSI_BEACON_LOSS_EVENT,
2087 * The driver/our work has already reported this event or the
2088 * connection monitoring has kicked in and we have already sent
2089 * a probe request. Or maybe the AP died and the driver keeps
2090 * reporting until we disassociate...
2092 * In either case we have to ignore the current call to this
2093 * function (except for setting the correct probe reason bit)
2094 * because otherwise we would reset the timer every time and
2095 * never check whether we received a probe response!
2097 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2100 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2102 mutex_unlock(&sdata->local->mtx);
2107 mutex_lock(&sdata->local->iflist_mtx);
2108 ieee80211_recalc_ps(sdata->local, -1);
2109 mutex_unlock(&sdata->local->iflist_mtx);
2111 ifmgd->probe_send_count = 0;
2112 ieee80211_mgd_probe_ap_send(sdata);
2114 sdata_unlock(sdata);
2117 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2118 struct ieee80211_vif *vif)
2120 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2121 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2122 struct cfg80211_bss *cbss;
2123 struct sk_buff *skb;
2127 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2130 sdata_assert_lock(sdata);
2132 if (ifmgd->associated)
2133 cbss = ifmgd->associated;
2134 else if (ifmgd->auth_data)
2135 cbss = ifmgd->auth_data->bss;
2136 else if (ifmgd->assoc_data)
2137 cbss = ifmgd->assoc_data->bss;
2142 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2143 if (WARN_ON_ONCE(ssid == NULL))
2148 skb = ieee80211_build_probe_req(sdata, cbss->bssid,
2149 (u32) -1, cbss->channel,
2156 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2158 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2160 struct ieee80211_local *local = sdata->local;
2161 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2162 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2165 if (!ifmgd->associated) {
2166 sdata_unlock(sdata);
2170 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2171 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2173 mutex_lock(&local->mtx);
2174 sdata->vif.csa_active = false;
2175 if (sdata->csa_block_tx) {
2176 ieee80211_wake_vif_queues(local, sdata,
2177 IEEE80211_QUEUE_STOP_REASON_CSA);
2178 sdata->csa_block_tx = false;
2180 mutex_unlock(&local->mtx);
2182 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
2183 IEEE80211_DEAUTH_FRAME_LEN);
2184 sdata_unlock(sdata);
2187 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2189 struct ieee80211_sub_if_data *sdata =
2190 container_of(work, struct ieee80211_sub_if_data,
2191 u.mgd.beacon_connection_loss_work);
2192 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2193 struct sta_info *sta;
2195 if (ifmgd->associated) {
2197 sta = sta_info_get(sdata, ifmgd->bssid);
2199 sta->beacon_loss_count++;
2203 if (ifmgd->connection_loss) {
2204 sdata_info(sdata, "Connection to AP %pM lost\n",
2206 __ieee80211_disconnect(sdata);
2208 ieee80211_mgd_probe_ap(sdata, true);
2212 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2214 struct ieee80211_sub_if_data *sdata =
2215 container_of(work, struct ieee80211_sub_if_data,
2216 u.mgd.csa_connection_drop_work);
2218 __ieee80211_disconnect(sdata);
2221 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2223 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2224 struct ieee80211_hw *hw = &sdata->local->hw;
2226 trace_api_beacon_loss(sdata);
2228 sdata->u.mgd.connection_loss = false;
2229 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2231 EXPORT_SYMBOL(ieee80211_beacon_loss);
2233 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2235 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2236 struct ieee80211_hw *hw = &sdata->local->hw;
2238 trace_api_connection_loss(sdata);
2240 sdata->u.mgd.connection_loss = true;
2241 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2243 EXPORT_SYMBOL(ieee80211_connection_loss);
2246 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2249 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2251 sdata_assert_lock(sdata);
2254 sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2256 memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
2257 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2258 sdata->u.mgd.flags = 0;
2259 mutex_lock(&sdata->local->mtx);
2260 ieee80211_vif_release_channel(sdata);
2261 mutex_unlock(&sdata->local->mtx);
2264 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2266 sdata->u.mgd.auth_data = NULL;
2269 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2270 struct ieee80211_mgmt *mgmt, size_t len)
2272 struct ieee80211_local *local = sdata->local;
2273 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2275 struct ieee802_11_elems elems;
2278 pos = mgmt->u.auth.variable;
2279 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2280 if (!elems.challenge)
2282 auth_data->expected_transaction = 4;
2283 drv_mgd_prepare_tx(sdata->local, sdata);
2284 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
2285 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2286 IEEE80211_TX_INTFL_MLME_CONN_TX;
2287 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2288 elems.challenge - 2, elems.challenge_len + 2,
2289 auth_data->bss->bssid, auth_data->bss->bssid,
2290 auth_data->key, auth_data->key_len,
2291 auth_data->key_idx, tx_flags);
2294 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2295 struct ieee80211_mgmt *mgmt, size_t len)
2297 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2299 u16 auth_alg, auth_transaction, status_code;
2300 struct sta_info *sta;
2302 sdata_assert_lock(sdata);
2307 if (!ifmgd->auth_data || ifmgd->auth_data->done)
2310 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2312 if (!ether_addr_equal(bssid, mgmt->bssid))
2315 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2316 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2317 status_code = le16_to_cpu(mgmt->u.auth.status_code);
2319 if (auth_alg != ifmgd->auth_data->algorithm ||
2320 auth_transaction != ifmgd->auth_data->expected_transaction) {
2321 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2322 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2324 ifmgd->auth_data->expected_transaction);
2328 if (status_code != WLAN_STATUS_SUCCESS) {
2329 sdata_info(sdata, "%pM denied authentication (status %d)\n",
2330 mgmt->sa, status_code);
2331 ieee80211_destroy_auth_data(sdata, false);
2332 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2336 switch (ifmgd->auth_data->algorithm) {
2337 case WLAN_AUTH_OPEN:
2338 case WLAN_AUTH_LEAP:
2342 case WLAN_AUTH_SHARED_KEY:
2343 if (ifmgd->auth_data->expected_transaction != 4) {
2344 ieee80211_auth_challenge(sdata, mgmt, len);
2345 /* need another frame */
2350 WARN_ONCE(1, "invalid auth alg %d",
2351 ifmgd->auth_data->algorithm);
2355 sdata_info(sdata, "authenticated\n");
2356 ifmgd->auth_data->done = true;
2357 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2358 ifmgd->auth_data->timeout_started = true;
2359 run_again(sdata, ifmgd->auth_data->timeout);
2361 if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
2362 ifmgd->auth_data->expected_transaction != 2) {
2364 * Report auth frame to user space for processing since another
2365 * round of Authentication frames is still needed.
2367 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2371 /* move station state to auth */
2372 mutex_lock(&sdata->local->sta_mtx);
2373 sta = sta_info_get(sdata, bssid);
2375 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2378 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2379 sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2382 mutex_unlock(&sdata->local->sta_mtx);
2384 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2387 mutex_unlock(&sdata->local->sta_mtx);
2388 /* ignore frame -- wait for timeout */
2391 #define case_WLAN(type) \
2392 case WLAN_REASON_##type: return #type
2394 static const char *ieee80211_get_reason_code_string(u16 reason_code)
2396 switch (reason_code) {
2397 case_WLAN(UNSPECIFIED);
2398 case_WLAN(PREV_AUTH_NOT_VALID);
2399 case_WLAN(DEAUTH_LEAVING);
2400 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
2401 case_WLAN(DISASSOC_AP_BUSY);
2402 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
2403 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
2404 case_WLAN(DISASSOC_STA_HAS_LEFT);
2405 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
2406 case_WLAN(DISASSOC_BAD_POWER);
2407 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
2408 case_WLAN(INVALID_IE);
2409 case_WLAN(MIC_FAILURE);
2410 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
2411 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
2412 case_WLAN(IE_DIFFERENT);
2413 case_WLAN(INVALID_GROUP_CIPHER);
2414 case_WLAN(INVALID_PAIRWISE_CIPHER);
2415 case_WLAN(INVALID_AKMP);
2416 case_WLAN(UNSUPP_RSN_VERSION);
2417 case_WLAN(INVALID_RSN_IE_CAP);
2418 case_WLAN(IEEE8021X_FAILED);
2419 case_WLAN(CIPHER_SUITE_REJECTED);
2420 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
2421 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
2422 case_WLAN(DISASSOC_LOW_ACK);
2423 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
2424 case_WLAN(QSTA_LEAVE_QBSS);
2425 case_WLAN(QSTA_NOT_USE);
2426 case_WLAN(QSTA_REQUIRE_SETUP);
2427 case_WLAN(QSTA_TIMEOUT);
2428 case_WLAN(QSTA_CIPHER_NOT_SUPP);
2429 case_WLAN(MESH_PEER_CANCELED);
2430 case_WLAN(MESH_MAX_PEERS);
2431 case_WLAN(MESH_CONFIG);
2432 case_WLAN(MESH_CLOSE);
2433 case_WLAN(MESH_MAX_RETRIES);
2434 case_WLAN(MESH_CONFIRM_TIMEOUT);
2435 case_WLAN(MESH_INVALID_GTK);
2436 case_WLAN(MESH_INCONSISTENT_PARAM);
2437 case_WLAN(MESH_INVALID_SECURITY);
2438 case_WLAN(MESH_PATH_ERROR);
2439 case_WLAN(MESH_PATH_NOFORWARD);
2440 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
2441 case_WLAN(MAC_EXISTS_IN_MBSS);
2442 case_WLAN(MESH_CHAN_REGULATORY);
2443 case_WLAN(MESH_CHAN);
2444 default: return "<unknown>";
2448 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
2449 struct ieee80211_mgmt *mgmt, size_t len)
2451 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2452 const u8 *bssid = NULL;
2455 sdata_assert_lock(sdata);
2460 if (!ifmgd->associated ||
2461 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2464 bssid = ifmgd->associated->bssid;
2466 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
2468 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
2469 bssid, reason_code, ieee80211_get_reason_code_string(reason_code));
2471 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2473 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2477 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
2478 struct ieee80211_mgmt *mgmt, size_t len)
2480 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2483 sdata_assert_lock(sdata);
2488 if (!ifmgd->associated ||
2489 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2492 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
2494 sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
2495 mgmt->sa, reason_code);
2497 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2499 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2502 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
2503 u8 *supp_rates, unsigned int supp_rates_len,
2504 u32 *rates, u32 *basic_rates,
2505 bool *have_higher_than_11mbit,
2506 int *min_rate, int *min_rate_index,
2507 int shift, u32 rate_flags)
2511 for (i = 0; i < supp_rates_len; i++) {
2512 int rate = supp_rates[i] & 0x7f;
2513 bool is_basic = !!(supp_rates[i] & 0x80);
2515 if ((rate * 5 * (1 << shift)) > 110)
2516 *have_higher_than_11mbit = true;
2519 * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
2520 * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
2522 * Note: Even through the membership selector and the basic
2523 * rate flag share the same bit, they are not exactly
2526 if (!!(supp_rates[i] & 0x80) &&
2527 (supp_rates[i] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY)
2530 for (j = 0; j < sband->n_bitrates; j++) {
2531 struct ieee80211_rate *br;
2534 br = &sband->bitrates[j];
2535 if ((rate_flags & br->flags) != rate_flags)
2538 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
2539 if (brate == rate) {
2542 *basic_rates |= BIT(j);
2543 if ((rate * 5) < *min_rate) {
2544 *min_rate = rate * 5;
2545 *min_rate_index = j;
2553 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2556 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2558 sdata_assert_lock(sdata);
2561 sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2563 memset(sdata->u.mgd.bssid, 0, ETH_ALEN);
2564 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2565 sdata->u.mgd.flags = 0;
2566 mutex_lock(&sdata->local->mtx);
2567 ieee80211_vif_release_channel(sdata);
2568 mutex_unlock(&sdata->local->mtx);
2572 sdata->u.mgd.assoc_data = NULL;
2575 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
2576 struct cfg80211_bss *cbss,
2577 struct ieee80211_mgmt *mgmt, size_t len)
2579 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2580 struct ieee80211_local *local = sdata->local;
2581 struct ieee80211_supported_band *sband;
2582 struct sta_info *sta;
2584 u16 capab_info, aid;
2585 struct ieee802_11_elems elems;
2586 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2587 const struct cfg80211_bss_ies *bss_ies = NULL;
2588 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
2593 /* AssocResp and ReassocResp have identical structure */
2595 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
2596 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
2598 if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2599 sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
2601 aid &= ~(BIT(15) | BIT(14));
2603 ifmgd->broken_ap = false;
2605 if (aid == 0 || aid > IEEE80211_MAX_AID) {
2606 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
2609 ifmgd->broken_ap = true;
2612 pos = mgmt->u.assoc_resp.variable;
2613 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2615 if (!elems.supp_rates) {
2616 sdata_info(sdata, "no SuppRates element in AssocResp\n");
2623 * Some APs are erroneously not including some information in their
2624 * (re)association response frames. Try to recover by using the data
2625 * from the beacon or probe response. This seems to afflict mobile
2626 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2627 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2629 if ((assoc_data->wmm && !elems.wmm_param) ||
2630 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2631 (!elems.ht_cap_elem || !elems.ht_operation)) ||
2632 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2633 (!elems.vht_cap_elem || !elems.vht_operation))) {
2634 const struct cfg80211_bss_ies *ies;
2635 struct ieee802_11_elems bss_elems;
2638 ies = rcu_dereference(cbss->ies);
2640 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
2646 ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
2648 if (assoc_data->wmm &&
2649 !elems.wmm_param && bss_elems.wmm_param) {
2650 elems.wmm_param = bss_elems.wmm_param;
2652 "AP bug: WMM param missing from AssocResp\n");
2656 * Also check if we requested HT/VHT, otherwise the AP doesn't
2657 * have to include the IEs in the (re)association response.
2659 if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
2660 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2661 elems.ht_cap_elem = bss_elems.ht_cap_elem;
2663 "AP bug: HT capability missing from AssocResp\n");
2665 if (!elems.ht_operation && bss_elems.ht_operation &&
2666 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2667 elems.ht_operation = bss_elems.ht_operation;
2669 "AP bug: HT operation missing from AssocResp\n");
2671 if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
2672 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2673 elems.vht_cap_elem = bss_elems.vht_cap_elem;
2675 "AP bug: VHT capa missing from AssocResp\n");
2677 if (!elems.vht_operation && bss_elems.vht_operation &&
2678 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2679 elems.vht_operation = bss_elems.vht_operation;
2681 "AP bug: VHT operation missing from AssocResp\n");
2686 * We previously checked these in the beacon/probe response, so
2687 * they should be present here. This is just a safety net.
2689 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2690 (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
2692 "HT AP is missing WMM params or HT capability/operation\n");
2697 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2698 (!elems.vht_cap_elem || !elems.vht_operation)) {
2700 "VHT AP is missing VHT capability/operation\n");
2705 mutex_lock(&sdata->local->sta_mtx);
2707 * station info was already allocated and inserted before
2708 * the association and should be available to us
2710 sta = sta_info_get(sdata, cbss->bssid);
2711 if (WARN_ON(!sta)) {
2712 mutex_unlock(&sdata->local->sta_mtx);
2717 sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
2719 /* Set up internal HT/VHT capabilities */
2720 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
2721 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
2722 elems.ht_cap_elem, sta);
2724 if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
2725 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
2726 elems.vht_cap_elem, sta);
2729 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
2730 * in their association response, so ignore that data for our own
2731 * configuration. If it changed since the last beacon, we'll get the
2732 * next beacon and update then.
2736 * If an operating mode notification IE is present, override the
2737 * NSS calculation (that would be done in rate_control_rate_init())
2738 * and use the # of streams from that element.
2740 if (elems.opmode_notif &&
2741 !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
2744 nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
2745 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
2747 sta->sta.rx_nss = nss;
2750 rate_control_rate_init(sta);
2752 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
2753 set_sta_flag(sta, WLAN_STA_MFP);
2755 sta->sta.wme = elems.wmm_param;
2757 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
2758 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
2759 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
2762 "failed to move station %pM to desired state\n",
2764 WARN_ON(__sta_info_destroy(sta));
2765 mutex_unlock(&sdata->local->sta_mtx);
2770 mutex_unlock(&sdata->local->sta_mtx);
2773 * Always handle WMM once after association regardless
2774 * of the first value the AP uses. Setting -1 here has
2775 * that effect because the AP values is an unsigned
2778 ifmgd->wmm_last_param_set = -1;
2780 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) && elems.wmm_param)
2781 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
2782 elems.wmm_param_len);
2784 ieee80211_set_wmm_default(sdata, false);
2785 changed |= BSS_CHANGED_QOS;
2787 /* set AID and assoc capability,
2788 * ieee80211_set_associated() will tell the driver */
2789 bss_conf->aid = aid;
2790 bss_conf->assoc_capability = capab_info;
2791 ieee80211_set_associated(sdata, cbss, changed);
2794 * If we're using 4-addr mode, let the AP know that we're
2795 * doing so, so that it can create the STA VLAN on its side
2797 if (ifmgd->use_4addr)
2798 ieee80211_send_4addr_nullfunc(local, sdata);
2801 * Start timer to probe the connection to the AP now.
2802 * Also start the timer that will detect beacon loss.
2804 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
2805 ieee80211_sta_reset_beacon_monitor(sdata);
2813 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
2814 struct ieee80211_mgmt *mgmt,
2817 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2818 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
2819 u16 capab_info, status_code, aid;
2820 struct ieee802_11_elems elems;
2821 int ac, uapsd_queues = -1;
2824 struct cfg80211_bss *bss;
2826 sdata_assert_lock(sdata);
2830 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
2834 * AssocResp and ReassocResp have identical structure, so process both
2835 * of them in this function.
2841 reassoc = ieee80211_is_reassoc_req(mgmt->frame_control);
2842 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
2843 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
2844 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
2847 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
2848 reassoc ? "Rea" : "A", mgmt->sa,
2849 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
2851 pos = mgmt->u.assoc_resp.variable;
2852 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2854 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
2855 elems.timeout_int &&
2856 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
2858 tu = le32_to_cpu(elems.timeout_int->value);
2859 ms = tu * 1024 / 1000;
2861 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
2863 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
2864 assoc_data->timeout_started = true;
2865 if (ms > IEEE80211_ASSOC_TIMEOUT)
2866 run_again(sdata, assoc_data->timeout);
2870 bss = assoc_data->bss;
2872 if (status_code != WLAN_STATUS_SUCCESS) {
2873 sdata_info(sdata, "%pM denied association (code=%d)\n",
2874 mgmt->sa, status_code);
2875 ieee80211_destroy_assoc_data(sdata, false);
2877 if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
2878 /* oops -- internal error -- send timeout for now */
2879 ieee80211_destroy_assoc_data(sdata, false);
2880 cfg80211_assoc_timeout(sdata->dev, bss);
2883 sdata_info(sdata, "associated\n");
2886 * destroy assoc_data afterwards, as otherwise an idle
2887 * recalc after assoc_data is NULL but before associated
2888 * is set can cause the interface to go idle
2890 ieee80211_destroy_assoc_data(sdata, true);
2892 /* get uapsd queues configuration */
2894 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
2895 if (sdata->tx_conf[ac].uapsd)
2896 uapsd_queues |= BIT(ac);
2899 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues);
2902 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
2903 struct ieee80211_mgmt *mgmt, size_t len,
2904 struct ieee80211_rx_status *rx_status,
2905 struct ieee802_11_elems *elems)
2907 struct ieee80211_local *local = sdata->local;
2908 struct ieee80211_bss *bss;
2909 struct ieee80211_channel *channel;
2911 sdata_assert_lock(sdata);
2913 channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
2917 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
2920 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
2921 ieee80211_rx_bss_put(local, bss);
2926 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
2927 struct sk_buff *skb)
2929 struct ieee80211_mgmt *mgmt = (void *)skb->data;
2930 struct ieee80211_if_managed *ifmgd;
2931 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
2932 size_t baselen, len = skb->len;
2933 struct ieee802_11_elems elems;
2935 ifmgd = &sdata->u.mgd;
2937 sdata_assert_lock(sdata);
2939 if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
2940 return; /* ignore ProbeResp to foreign address */
2942 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
2946 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
2949 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
2951 if (ifmgd->associated &&
2952 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2953 ieee80211_reset_ap_probe(sdata);
2955 if (ifmgd->auth_data && !ifmgd->auth_data->bss->proberesp_ies &&
2956 ether_addr_equal(mgmt->bssid, ifmgd->auth_data->bss->bssid)) {
2957 /* got probe response, continue with auth */
2958 sdata_info(sdata, "direct probe responded\n");
2959 ifmgd->auth_data->tries = 0;
2960 ifmgd->auth_data->timeout = jiffies;
2961 ifmgd->auth_data->timeout_started = true;
2962 run_again(sdata, ifmgd->auth_data->timeout);
2967 * This is the canonical list of information elements we care about,
2968 * the filter code also gives us all changes to the Microsoft OUI
2969 * (00:50:F2) vendor IE which is used for WMM which we need to track,
2970 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
2971 * changes to requested client power.
2973 * We implement beacon filtering in software since that means we can
2974 * avoid processing the frame here and in cfg80211, and userspace
2975 * will not be able to tell whether the hardware supports it or not.
2977 * XXX: This list needs to be dynamic -- userspace needs to be able to
2978 * add items it requires. It also needs to be able to tell us to
2979 * look out for other vendor IEs.
2981 static const u64 care_about_ies =
2982 (1ULL << WLAN_EID_COUNTRY) |
2983 (1ULL << WLAN_EID_ERP_INFO) |
2984 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
2985 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
2986 (1ULL << WLAN_EID_HT_CAPABILITY) |
2987 (1ULL << WLAN_EID_HT_OPERATION);
2989 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
2990 struct ieee80211_mgmt *mgmt, size_t len,
2991 struct ieee80211_rx_status *rx_status)
2993 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2994 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2996 struct ieee802_11_elems elems;
2997 struct ieee80211_local *local = sdata->local;
2998 struct ieee80211_chanctx_conf *chanctx_conf;
2999 struct ieee80211_channel *chan;
3000 struct sta_info *sta;
3006 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3008 sdata_assert_lock(sdata);
3010 /* Process beacon from the current BSS */
3011 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3016 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3017 if (!chanctx_conf) {
3022 if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
3026 chan = chanctx_conf->def.chan;
3029 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3030 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3031 ieee802_11_parse_elems(mgmt->u.beacon.variable,
3032 len - baselen, false, &elems);
3034 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3035 if (elems.tim && !elems.parse_error) {
3036 const struct ieee80211_tim_ie *tim_ie = elems.tim;
3037 ifmgd->dtim_period = tim_ie->dtim_period;
3039 ifmgd->have_beacon = true;
3040 ifmgd->assoc_data->need_beacon = false;
3041 if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
3042 sdata->vif.bss_conf.sync_tsf =
3043 le64_to_cpu(mgmt->u.beacon.timestamp);
3044 sdata->vif.bss_conf.sync_device_ts =
3045 rx_status->device_timestamp;
3047 sdata->vif.bss_conf.sync_dtim_count =
3048 elems.tim->dtim_count;
3050 sdata->vif.bss_conf.sync_dtim_count = 0;
3052 /* continue assoc process */
3053 ifmgd->assoc_data->timeout = jiffies;
3054 ifmgd->assoc_data->timeout_started = true;
3055 run_again(sdata, ifmgd->assoc_data->timeout);
3059 if (!ifmgd->associated ||
3060 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3062 bssid = ifmgd->associated->bssid;
3064 /* Track average RSSI from the Beacon frames of the current AP */
3065 ifmgd->last_beacon_signal = rx_status->signal;
3066 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3067 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3068 ifmgd->ave_beacon_signal = rx_status->signal * 16;
3069 ifmgd->last_cqm_event_signal = 0;
3070 ifmgd->count_beacon_signal = 1;
3071 ifmgd->last_ave_beacon_signal = 0;
3073 ifmgd->ave_beacon_signal =
3074 (IEEE80211_SIGNAL_AVE_WEIGHT * rx_status->signal * 16 +
3075 (16 - IEEE80211_SIGNAL_AVE_WEIGHT) *
3076 ifmgd->ave_beacon_signal) / 16;
3077 ifmgd->count_beacon_signal++;
3080 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3081 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3082 int sig = ifmgd->ave_beacon_signal;
3083 int last_sig = ifmgd->last_ave_beacon_signal;
3086 * if signal crosses either of the boundaries, invoke callback
3087 * with appropriate parameters
3089 if (sig > ifmgd->rssi_max_thold &&
3090 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3091 ifmgd->last_ave_beacon_signal = sig;
3092 drv_rssi_callback(local, sdata, RSSI_EVENT_HIGH);
3093 } else if (sig < ifmgd->rssi_min_thold &&
3094 (last_sig >= ifmgd->rssi_max_thold ||
3096 ifmgd->last_ave_beacon_signal = sig;
3097 drv_rssi_callback(local, sdata, RSSI_EVENT_LOW);
3101 if (bss_conf->cqm_rssi_thold &&
3102 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3103 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3104 int sig = ifmgd->ave_beacon_signal / 16;
3105 int last_event = ifmgd->last_cqm_event_signal;
3106 int thold = bss_conf->cqm_rssi_thold;
3107 int hyst = bss_conf->cqm_rssi_hyst;
3109 (last_event == 0 || sig < last_event - hyst)) {
3110 ifmgd->last_cqm_event_signal = sig;
3111 ieee80211_cqm_rssi_notify(
3113 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3115 } else if (sig > thold &&
3116 (last_event == 0 || sig > last_event + hyst)) {
3117 ifmgd->last_cqm_event_signal = sig;
3118 ieee80211_cqm_rssi_notify(
3120 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3125 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3126 mlme_dbg_ratelimited(sdata,
3127 "cancelling AP probe due to a received beacon\n");
3128 ieee80211_reset_ap_probe(sdata);
3132 * Push the beacon loss detection into the future since
3133 * we are processing a beacon from the AP just now.
3135 ieee80211_sta_reset_beacon_monitor(sdata);
3137 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
3138 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
3139 len - baselen, false, &elems,
3140 care_about_ies, ncrc);
3142 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
3143 bool directed_tim = ieee80211_check_tim(elems.tim,
3147 if (local->hw.conf.dynamic_ps_timeout > 0) {
3148 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
3149 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
3150 ieee80211_hw_config(local,
3151 IEEE80211_CONF_CHANGE_PS);
3153 ieee80211_send_nullfunc(local, sdata, 0);
3154 } else if (!local->pspolling && sdata->u.mgd.powersave) {
3155 local->pspolling = true;
3158 * Here is assumed that the driver will be
3159 * able to send ps-poll frame and receive a
3160 * response even though power save mode is
3161 * enabled, but some drivers might require
3162 * to disable power save here. This needs
3163 * to be investigated.
3165 ieee80211_send_pspoll(local, sdata);
3170 if (sdata->vif.p2p) {
3171 struct ieee80211_p2p_noa_attr noa = {};
3174 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
3176 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
3177 (u8 *) &noa, sizeof(noa));
3179 if (sdata->u.mgd.p2p_noa_index != noa.index) {
3180 /* valid noa_attr and index changed */
3181 sdata->u.mgd.p2p_noa_index = noa.index;
3182 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
3183 changed |= BSS_CHANGED_P2P_PS;
3185 * make sure we update all information, the CRC
3186 * mechanism doesn't look at P2P attributes.
3188 ifmgd->beacon_crc_valid = false;
3190 } else if (sdata->u.mgd.p2p_noa_index != -1) {
3191 /* noa_attr not found and we had valid noa_attr before */
3192 sdata->u.mgd.p2p_noa_index = -1;
3193 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
3194 changed |= BSS_CHANGED_P2P_PS;
3195 ifmgd->beacon_crc_valid = false;
3199 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
3201 ifmgd->beacon_crc = ncrc;
3202 ifmgd->beacon_crc_valid = true;
3204 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3206 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
3209 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
3210 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3211 elems.wmm_param_len))
3212 changed |= BSS_CHANGED_QOS;
3215 * If we haven't had a beacon before, tell the driver about the
3216 * DTIM period (and beacon timing if desired) now.
3218 if (!ifmgd->have_beacon) {
3219 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3221 bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
3223 bss_conf->dtim_period = 1;
3225 if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
3226 sdata->vif.bss_conf.sync_tsf =
3227 le64_to_cpu(mgmt->u.beacon.timestamp);
3228 sdata->vif.bss_conf.sync_device_ts =
3229 rx_status->device_timestamp;
3231 sdata->vif.bss_conf.sync_dtim_count =
3232 elems.tim->dtim_count;
3234 sdata->vif.bss_conf.sync_dtim_count = 0;
3237 changed |= BSS_CHANGED_BEACON_INFO;
3238 ifmgd->have_beacon = true;
3240 mutex_lock(&local->iflist_mtx);
3241 ieee80211_recalc_ps(local, -1);
3242 mutex_unlock(&local->iflist_mtx);
3244 ieee80211_recalc_ps_vif(sdata);
3247 if (elems.erp_info) {
3249 erp_value = elems.erp_info[0];
3253 changed |= ieee80211_handle_bss_capability(sdata,
3254 le16_to_cpu(mgmt->u.beacon.capab_info),
3255 erp_valid, erp_value);
3257 mutex_lock(&local->sta_mtx);
3258 sta = sta_info_get(sdata, bssid);
3260 if (ieee80211_config_bw(sdata, sta,
3261 elems.ht_cap_elem, elems.ht_operation,
3262 elems.vht_operation, bssid, &changed)) {
3263 mutex_unlock(&local->sta_mtx);
3264 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3265 WLAN_REASON_DEAUTH_LEAVING,
3267 cfg80211_tx_mlme_mgmt(sdata->dev, deauth_buf,
3268 sizeof(deauth_buf));
3272 if (sta && elems.opmode_notif)
3273 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
3274 rx_status->band, true);
3275 mutex_unlock(&local->sta_mtx);
3277 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
3279 elems.country_elem_len,
3280 elems.pwr_constr_elem,
3281 elems.cisco_dtpc_elem);
3283 ieee80211_bss_info_change_notify(sdata, changed);
3286 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
3287 struct sk_buff *skb)
3289 struct ieee80211_rx_status *rx_status;
3290 struct ieee80211_mgmt *mgmt;
3292 struct ieee802_11_elems elems;
3295 rx_status = (struct ieee80211_rx_status *) skb->cb;
3296 mgmt = (struct ieee80211_mgmt *) skb->data;
3297 fc = le16_to_cpu(mgmt->frame_control);
3301 switch (fc & IEEE80211_FCTL_STYPE) {
3302 case IEEE80211_STYPE_BEACON:
3303 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
3305 case IEEE80211_STYPE_PROBE_RESP:
3306 ieee80211_rx_mgmt_probe_resp(sdata, skb);
3308 case IEEE80211_STYPE_AUTH:
3309 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
3311 case IEEE80211_STYPE_DEAUTH:
3312 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
3314 case IEEE80211_STYPE_DISASSOC:
3315 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
3317 case IEEE80211_STYPE_ASSOC_RESP:
3318 case IEEE80211_STYPE_REASSOC_RESP:
3319 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
3321 case IEEE80211_STYPE_ACTION:
3322 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
3323 ies_len = skb->len -
3324 offsetof(struct ieee80211_mgmt,
3325 u.action.u.chan_switch.variable);
3330 ieee802_11_parse_elems(
3331 mgmt->u.action.u.chan_switch.variable,
3332 ies_len, true, &elems);
3334 if (elems.parse_error)
3337 ieee80211_sta_process_chanswitch(sdata,
3340 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
3341 ies_len = skb->len -
3342 offsetof(struct ieee80211_mgmt,
3343 u.action.u.ext_chan_switch.variable);
3348 ieee802_11_parse_elems(
3349 mgmt->u.action.u.ext_chan_switch.variable,
3350 ies_len, true, &elems);
3352 if (elems.parse_error)
3355 /* for the handling code pretend this was also an IE */
3356 elems.ext_chansw_ie =
3357 &mgmt->u.action.u.ext_chan_switch.data;
3359 ieee80211_sta_process_chanswitch(sdata,
3365 sdata_unlock(sdata);
3368 static void ieee80211_sta_timer(unsigned long data)
3370 struct ieee80211_sub_if_data *sdata =
3371 (struct ieee80211_sub_if_data *) data;
3373 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3376 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
3377 u8 *bssid, u8 reason, bool tx)
3379 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3381 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
3384 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
3385 IEEE80211_DEAUTH_FRAME_LEN);
3388 static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
3390 struct ieee80211_local *local = sdata->local;
3391 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3392 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
3395 sdata_assert_lock(sdata);
3397 if (WARN_ON_ONCE(!auth_data))
3402 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
3403 sdata_info(sdata, "authentication with %pM timed out\n",
3404 auth_data->bss->bssid);
3407 * Most likely AP is not in the range so remove the
3408 * bss struct for that AP.
3410 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
3415 drv_mgd_prepare_tx(local, sdata);
3417 if (auth_data->bss->proberesp_ies) {
3421 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
3422 auth_data->bss->bssid, auth_data->tries,
3423 IEEE80211_AUTH_MAX_TRIES);
3425 auth_data->expected_transaction = 2;
3427 if (auth_data->algorithm == WLAN_AUTH_SAE) {
3428 trans = auth_data->sae_trans;
3429 status = auth_data->sae_status;
3430 auth_data->expected_transaction = trans;
3433 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
3434 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3435 IEEE80211_TX_INTFL_MLME_CONN_TX;
3437 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
3438 auth_data->data, auth_data->data_len,
3439 auth_data->bss->bssid,
3440 auth_data->bss->bssid, NULL, 0, 0,
3445 sdata_info(sdata, "direct probe to %pM (try %d/%i)\n",
3446 auth_data->bss->bssid, auth_data->tries,
3447 IEEE80211_AUTH_MAX_TRIES);
3450 ssidie = ieee80211_bss_get_ie(auth_data->bss, WLAN_EID_SSID);
3456 * Direct probe is sent to broadcast address as some APs
3457 * will not answer to direct packet in unassociated state.
3459 ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1],
3460 NULL, 0, (u32) -1, true, 0,
3461 auth_data->bss->channel, false);
3465 if (tx_flags == 0) {
3466 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
3467 auth_data->timeout_started = true;
3468 run_again(sdata, auth_data->timeout);
3470 auth_data->timeout =
3471 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
3472 auth_data->timeout_started = true;
3473 run_again(sdata, auth_data->timeout);
3479 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
3481 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3482 struct ieee80211_local *local = sdata->local;
3484 sdata_assert_lock(sdata);
3486 assoc_data->tries++;
3487 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
3488 sdata_info(sdata, "association with %pM timed out\n",
3489 assoc_data->bss->bssid);
3492 * Most likely AP is not in the range so remove the
3493 * bss struct for that AP.
3495 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
3500 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
3501 assoc_data->bss->bssid, assoc_data->tries,
3502 IEEE80211_ASSOC_MAX_TRIES);
3503 ieee80211_send_assoc(sdata);
3505 if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) {
3506 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
3507 assoc_data->timeout_started = true;
3508 run_again(sdata, assoc_data->timeout);
3510 assoc_data->timeout =
3511 round_jiffies_up(jiffies +
3512 IEEE80211_ASSOC_TIMEOUT_LONG);
3513 assoc_data->timeout_started = true;
3514 run_again(sdata, assoc_data->timeout);
3520 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
3521 __le16 fc, bool acked)
3523 struct ieee80211_local *local = sdata->local;
3525 sdata->u.mgd.status_fc = fc;
3526 sdata->u.mgd.status_acked = acked;
3527 sdata->u.mgd.status_received = true;
3529 ieee80211_queue_work(&local->hw, &sdata->work);
3532 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
3534 struct ieee80211_local *local = sdata->local;
3535 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3539 if (ifmgd->status_received) {
3540 __le16 fc = ifmgd->status_fc;
3541 bool status_acked = ifmgd->status_acked;
3543 ifmgd->status_received = false;
3544 if (ifmgd->auth_data &&
3545 (ieee80211_is_probe_req(fc) || ieee80211_is_auth(fc))) {
3547 ifmgd->auth_data->timeout =
3548 jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
3549 run_again(sdata, ifmgd->auth_data->timeout);
3551 ifmgd->auth_data->timeout = jiffies - 1;
3553 ifmgd->auth_data->timeout_started = true;
3554 } else if (ifmgd->assoc_data &&
3555 (ieee80211_is_assoc_req(fc) ||
3556 ieee80211_is_reassoc_req(fc))) {
3558 ifmgd->assoc_data->timeout =
3559 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
3560 run_again(sdata, ifmgd->assoc_data->timeout);
3562 ifmgd->assoc_data->timeout = jiffies - 1;
3564 ifmgd->assoc_data->timeout_started = true;
3568 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
3569 time_after(jiffies, ifmgd->auth_data->timeout)) {
3570 if (ifmgd->auth_data->done) {
3572 * ok ... we waited for assoc but userspace didn't,
3573 * so let's just kill the auth data
3575 ieee80211_destroy_auth_data(sdata, false);
3576 } else if (ieee80211_probe_auth(sdata)) {
3579 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
3581 ieee80211_destroy_auth_data(sdata, false);
3583 cfg80211_auth_timeout(sdata->dev, bssid);
3585 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
3586 run_again(sdata, ifmgd->auth_data->timeout);
3588 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
3589 time_after(jiffies, ifmgd->assoc_data->timeout)) {
3590 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
3591 ieee80211_do_assoc(sdata)) {
3592 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
3594 ieee80211_destroy_assoc_data(sdata, false);
3595 cfg80211_assoc_timeout(sdata->dev, bss);
3597 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
3598 run_again(sdata, ifmgd->assoc_data->timeout);
3600 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
3601 ifmgd->associated) {
3605 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
3607 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
3608 max_tries = max_nullfunc_tries;
3610 max_tries = max_probe_tries;
3612 /* ACK received for nullfunc probing frame */
3613 if (!ifmgd->probe_send_count)
3614 ieee80211_reset_ap_probe(sdata);
3615 else if (ifmgd->nullfunc_failed) {
3616 if (ifmgd->probe_send_count < max_tries) {
3618 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3619 bssid, ifmgd->probe_send_count,
3621 ieee80211_mgd_probe_ap_send(sdata);
3624 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3626 ieee80211_sta_connection_lost(sdata, bssid,
3627 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3630 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
3631 run_again(sdata, ifmgd->probe_timeout);
3632 else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
3634 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3635 bssid, probe_wait_ms);
3636 ieee80211_sta_connection_lost(sdata, bssid,
3637 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3638 } else if (ifmgd->probe_send_count < max_tries) {
3640 "No probe response from AP %pM after %dms, try %d/%i\n",
3641 bssid, probe_wait_ms,
3642 ifmgd->probe_send_count, max_tries);
3643 ieee80211_mgd_probe_ap_send(sdata);
3646 * We actually lost the connection ... or did we?
3649 wiphy_debug(local->hw.wiphy,
3650 "%s: No probe response from AP %pM"
3651 " after %dms, disconnecting.\n",
3653 bssid, probe_wait_ms);
3655 ieee80211_sta_connection_lost(sdata, bssid,
3656 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3660 sdata_unlock(sdata);
3663 static void ieee80211_sta_bcn_mon_timer(unsigned long data)
3665 struct ieee80211_sub_if_data *sdata =
3666 (struct ieee80211_sub_if_data *) data;
3667 struct ieee80211_local *local = sdata->local;
3669 if (local->quiescing)
3672 if (sdata->vif.csa_active)
3675 sdata->u.mgd.connection_loss = false;
3676 ieee80211_queue_work(&sdata->local->hw,
3677 &sdata->u.mgd.beacon_connection_loss_work);
3680 static void ieee80211_sta_conn_mon_timer(unsigned long data)
3682 struct ieee80211_sub_if_data *sdata =
3683 (struct ieee80211_sub_if_data *) data;
3684 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3685 struct ieee80211_local *local = sdata->local;
3687 if (local->quiescing)
3690 if (sdata->vif.csa_active)
3693 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
3696 static void ieee80211_sta_monitor_work(struct work_struct *work)
3698 struct ieee80211_sub_if_data *sdata =
3699 container_of(work, struct ieee80211_sub_if_data,
3700 u.mgd.monitor_work);
3702 ieee80211_mgd_probe_ap(sdata, false);
3705 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
3709 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
3710 __ieee80211_stop_poll(sdata);
3712 /* let's probe the connection once */
3713 flags = sdata->local->hw.flags;
3714 if (!(flags & IEEE80211_HW_CONNECTION_MONITOR))
3715 ieee80211_queue_work(&sdata->local->hw,
3716 &sdata->u.mgd.monitor_work);
3717 /* and do all the other regular work too */
3718 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3723 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
3725 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3726 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3730 if (ifmgd->auth_data || ifmgd->assoc_data) {
3731 const u8 *bssid = ifmgd->auth_data ?
3732 ifmgd->auth_data->bss->bssid :
3733 ifmgd->assoc_data->bss->bssid;
3736 * If we are trying to authenticate / associate while suspending,
3737 * cfg80211 won't know and won't actually abort those attempts,
3738 * thus we need to do that ourselves.
3740 ieee80211_send_deauth_disassoc(sdata, bssid,
3741 IEEE80211_STYPE_DEAUTH,
3742 WLAN_REASON_DEAUTH_LEAVING,
3744 if (ifmgd->assoc_data)
3745 ieee80211_destroy_assoc_data(sdata, false);
3746 if (ifmgd->auth_data)
3747 ieee80211_destroy_auth_data(sdata, false);
3748 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
3749 IEEE80211_DEAUTH_FRAME_LEN);
3752 sdata_unlock(sdata);
3755 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
3757 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3760 if (!ifmgd->associated) {
3761 sdata_unlock(sdata);
3765 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
3766 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
3767 mlme_dbg(sdata, "driver requested disconnect after resume\n");
3768 ieee80211_sta_connection_lost(sdata,
3769 ifmgd->associated->bssid,
3770 WLAN_REASON_UNSPECIFIED,
3772 sdata_unlock(sdata);
3775 sdata_unlock(sdata);
3779 /* interface setup */
3780 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
3782 struct ieee80211_if_managed *ifmgd;
3784 ifmgd = &sdata->u.mgd;
3785 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
3786 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
3787 INIT_WORK(&ifmgd->beacon_connection_loss_work,
3788 ieee80211_beacon_connection_loss_work);
3789 INIT_WORK(&ifmgd->csa_connection_drop_work,
3790 ieee80211_csa_connection_drop_work);
3791 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
3792 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
3793 ieee80211_tdls_peer_del_work);
3794 setup_timer(&ifmgd->timer, ieee80211_sta_timer,
3795 (unsigned long) sdata);
3796 setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
3797 (unsigned long) sdata);
3798 setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
3799 (unsigned long) sdata);
3800 setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
3801 (unsigned long) sdata);
3804 ifmgd->powersave = sdata->wdev.ps;
3805 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
3806 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
3807 ifmgd->p2p_noa_index = -1;
3809 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
3810 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
3812 ifmgd->req_smps = IEEE80211_SMPS_OFF;
3815 /* scan finished notification */
3816 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
3818 struct ieee80211_sub_if_data *sdata;
3820 /* Restart STA timers */
3822 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
3823 if (ieee80211_sdata_running(sdata))
3824 ieee80211_restart_sta_timer(sdata);
3829 int ieee80211_max_network_latency(struct notifier_block *nb,
3830 unsigned long data, void *dummy)
3832 s32 latency_usec = (s32) data;
3833 struct ieee80211_local *local =
3834 container_of(nb, struct ieee80211_local,
3835 network_latency_notifier);
3837 mutex_lock(&local->iflist_mtx);
3838 ieee80211_recalc_ps(local, latency_usec);
3839 mutex_unlock(&local->iflist_mtx);
3844 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
3845 struct cfg80211_bss *cbss)
3847 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3848 const u8 *ht_cap_ie, *vht_cap_ie;
3849 const struct ieee80211_ht_cap *ht_cap;
3850 const struct ieee80211_vht_cap *vht_cap;
3853 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
3856 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
3857 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
3858 ht_cap = (void *)(ht_cap_ie + 2);
3859 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
3861 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
3862 * "Tx Unequal Modulation Supported" fields.
3866 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
3869 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
3870 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
3874 vht_cap = (void *)(vht_cap_ie + 2);
3875 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
3876 for (nss = 8; nss > 0; nss--) {
3877 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
3878 IEEE80211_VHT_MCS_NOT_SUPPORTED)
3881 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
3882 chains = max(chains, nss);
3888 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
3889 struct cfg80211_bss *cbss)
3891 struct ieee80211_local *local = sdata->local;
3892 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3893 const struct ieee80211_ht_cap *ht_cap = NULL;
3894 const struct ieee80211_ht_operation *ht_oper = NULL;
3895 const struct ieee80211_vht_operation *vht_oper = NULL;
3896 struct ieee80211_supported_band *sband;
3897 struct cfg80211_chan_def chandef;
3900 sband = local->hw.wiphy->bands[cbss->channel->band];
3902 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
3903 IEEE80211_STA_DISABLE_80P80MHZ |
3904 IEEE80211_STA_DISABLE_160MHZ);
3908 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
3909 sband->ht_cap.ht_supported) {
3910 const u8 *ht_oper_ie, *ht_cap_ie;
3912 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
3913 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
3914 ht_oper = (void *)(ht_oper_ie + 2);
3916 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
3917 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
3918 ht_cap = (void *)(ht_cap_ie + 2);
3921 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
3926 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
3927 sband->vht_cap.vht_supported) {
3928 const u8 *vht_oper_ie, *vht_cap;
3930 vht_oper_ie = ieee80211_bss_get_ie(cbss,
3931 WLAN_EID_VHT_OPERATION);
3932 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
3933 vht_oper = (void *)(vht_oper_ie + 2);
3934 if (vht_oper && !ht_oper) {
3937 "AP advertised VHT without HT, disabling both\n");
3938 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
3939 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
3942 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
3943 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
3944 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
3949 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
3951 ht_cap, ht_oper, vht_oper,
3954 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
3959 /* will change later if needed */
3960 sdata->smps_mode = IEEE80211_SMPS_OFF;
3962 mutex_lock(&local->mtx);
3964 * If this fails (possibly due to channel context sharing
3965 * on incompatible channels, e.g. 80+80 and 160 sharing the
3966 * same control channel) try to use a smaller bandwidth.
3968 ret = ieee80211_vif_use_channel(sdata, &chandef,
3969 IEEE80211_CHANCTX_SHARED);
3971 /* don't downgrade for 5 and 10 MHz channels, though. */
3972 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
3973 chandef.width == NL80211_CHAN_WIDTH_10)
3976 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
3977 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
3978 ret = ieee80211_vif_use_channel(sdata, &chandef,
3979 IEEE80211_CHANCTX_SHARED);
3982 mutex_unlock(&local->mtx);
3986 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
3987 struct cfg80211_bss *cbss, bool assoc)
3989 struct ieee80211_local *local = sdata->local;
3990 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3991 struct ieee80211_bss *bss = (void *)cbss->priv;
3992 struct sta_info *new_sta = NULL;
3993 bool have_sta = false;
3996 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
4001 have_sta = sta_info_get(sdata, cbss->bssid);
4006 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
4011 u32 rates = 0, basic_rates = 0;
4012 bool have_higher_than_11mbit;
4013 int min_rate = INT_MAX, min_rate_index = -1;
4014 struct ieee80211_chanctx_conf *chanctx_conf;
4015 struct ieee80211_supported_band *sband;
4016 const struct cfg80211_bss_ies *ies;
4020 sband = local->hw.wiphy->bands[cbss->channel->band];
4022 err = ieee80211_prep_channel(sdata, cbss);
4024 sta_info_free(local, new_sta);
4027 shift = ieee80211_vif_get_shift(&sdata->vif);
4030 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
4031 if (WARN_ON(!chanctx_conf)) {
4033 sta_info_free(local, new_sta);
4036 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
4039 ieee80211_get_rates(sband, bss->supp_rates,
4040 bss->supp_rates_len,
4041 &rates, &basic_rates,
4042 &have_higher_than_11mbit,
4043 &min_rate, &min_rate_index,
4047 * This used to be a workaround for basic rates missing
4048 * in the association response frame. Now that we no
4049 * longer use the basic rates from there, it probably
4050 * doesn't happen any more, but keep the workaround so
4051 * in case some *other* APs are buggy in different ways
4052 * we can connect -- with a warning.
4054 if (!basic_rates && min_rate_index >= 0) {
4056 "No basic rates, using min rate instead\n");
4057 basic_rates = BIT(min_rate_index);
4060 new_sta->sta.supp_rates[cbss->channel->band] = rates;
4061 sdata->vif.bss_conf.basic_rates = basic_rates;
4063 /* cf. IEEE 802.11 9.2.12 */
4064 if (cbss->channel->band == IEEE80211_BAND_2GHZ &&
4065 have_higher_than_11mbit)
4066 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
4068 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
4070 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
4072 /* set timing information */
4073 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
4075 ies = rcu_dereference(cbss->beacon_ies);
4079 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4080 sdata->vif.bss_conf.sync_device_ts =
4081 bss->device_ts_beacon;
4082 tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4083 ies->data, ies->len);
4084 if (tim_ie && tim_ie[1] >= 2)
4085 sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
4087 sdata->vif.bss_conf.sync_dtim_count = 0;
4088 } else if (!(local->hw.flags &
4089 IEEE80211_HW_TIMING_BEACON_ONLY)) {
4090 ies = rcu_dereference(cbss->proberesp_ies);
4091 /* must be non-NULL since beacon IEs were NULL */
4092 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4093 sdata->vif.bss_conf.sync_device_ts =
4094 bss->device_ts_presp;
4095 sdata->vif.bss_conf.sync_dtim_count = 0;
4097 sdata->vif.bss_conf.sync_tsf = 0;
4098 sdata->vif.bss_conf.sync_device_ts = 0;
4099 sdata->vif.bss_conf.sync_dtim_count = 0;
4103 /* tell driver about BSSID, basic rates and timing */
4104 ieee80211_bss_info_change_notify(sdata,
4105 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
4106 BSS_CHANGED_BEACON_INT);
4109 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
4111 err = sta_info_insert(new_sta);
4115 "failed to insert STA entry for the AP (error %d)\n",
4120 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
4126 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
4127 struct cfg80211_auth_request *req)
4129 struct ieee80211_local *local = sdata->local;
4130 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4131 struct ieee80211_mgd_auth_data *auth_data;
4135 /* prepare auth data structure */
4137 switch (req->auth_type) {
4138 case NL80211_AUTHTYPE_OPEN_SYSTEM:
4139 auth_alg = WLAN_AUTH_OPEN;
4141 case NL80211_AUTHTYPE_SHARED_KEY:
4142 if (IS_ERR(local->wep_tx_tfm))
4144 auth_alg = WLAN_AUTH_SHARED_KEY;
4146 case NL80211_AUTHTYPE_FT:
4147 auth_alg = WLAN_AUTH_FT;
4149 case NL80211_AUTHTYPE_NETWORK_EAP:
4150 auth_alg = WLAN_AUTH_LEAP;
4152 case NL80211_AUTHTYPE_SAE:
4153 auth_alg = WLAN_AUTH_SAE;
4159 auth_data = kzalloc(sizeof(*auth_data) + req->sae_data_len +
4160 req->ie_len, GFP_KERNEL);
4164 auth_data->bss = req->bss;
4166 if (req->sae_data_len >= 4) {
4167 __le16 *pos = (__le16 *) req->sae_data;
4168 auth_data->sae_trans = le16_to_cpu(pos[0]);
4169 auth_data->sae_status = le16_to_cpu(pos[1]);
4170 memcpy(auth_data->data, req->sae_data + 4,
4171 req->sae_data_len - 4);
4172 auth_data->data_len += req->sae_data_len - 4;
4175 if (req->ie && req->ie_len) {
4176 memcpy(&auth_data->data[auth_data->data_len],
4177 req->ie, req->ie_len);
4178 auth_data->data_len += req->ie_len;
4181 if (req->key && req->key_len) {
4182 auth_data->key_len = req->key_len;
4183 auth_data->key_idx = req->key_idx;
4184 memcpy(auth_data->key, req->key, req->key_len);
4187 auth_data->algorithm = auth_alg;
4189 /* try to authenticate/probe */
4191 if ((ifmgd->auth_data && !ifmgd->auth_data->done) ||
4192 ifmgd->assoc_data) {
4197 if (ifmgd->auth_data)
4198 ieee80211_destroy_auth_data(sdata, false);
4200 /* prep auth_data so we don't go into idle on disassoc */
4201 ifmgd->auth_data = auth_data;
4203 if (ifmgd->associated) {
4204 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4206 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4207 WLAN_REASON_UNSPECIFIED,
4210 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4214 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
4216 err = ieee80211_prep_connection(sdata, req->bss, false);
4220 err = ieee80211_probe_auth(sdata);
4222 sta_info_destroy_addr(sdata, req->bss->bssid);
4226 /* hold our own reference */
4227 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
4231 memset(ifmgd->bssid, 0, ETH_ALEN);
4232 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4233 ifmgd->auth_data = NULL;
4239 static bool ieee80211_usable_wmm_params(struct ieee80211_sub_if_data *sdata,
4240 const u8 *wmm_param, int len)
4248 if (wmm_param[5] != 1 /* version */)
4251 pos = wmm_param + 8;
4254 for (; left >= 4; left -= 4, pos += 4) {
4255 u8 aifsn = pos[0] & 0x0f;
4256 u8 ecwmin = pos[1] & 0x0f;
4257 u8 ecwmax = (pos[1] & 0xf0) >> 4;
4258 int aci = (pos[0] >> 5) & 0x03;
4262 "AP has invalid WMM params (AIFSN=%d for ACI %d), disabling WMM\n",
4266 if (ecwmin > ecwmax) {
4268 "AP has invalid WMM params (ECWmin/max=%d/%d for ACI %d), disabling WMM\n",
4269 ecwmin, ecwmax, aci);
4277 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
4278 struct cfg80211_assoc_request *req)
4280 struct ieee80211_local *local = sdata->local;
4281 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4282 struct ieee80211_bss *bss = (void *)req->bss->priv;
4283 struct ieee80211_mgd_assoc_data *assoc_data;
4284 const struct cfg80211_bss_ies *beacon_ies;
4285 struct ieee80211_supported_band *sband;
4286 const u8 *ssidie, *ht_ie, *vht_ie;
4289 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
4294 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
4300 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
4301 assoc_data->ssid_len = ssidie[1];
4304 if (ifmgd->associated) {
4305 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4307 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4308 WLAN_REASON_UNSPECIFIED,
4311 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4315 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
4320 if (ifmgd->assoc_data) {
4325 if (ifmgd->auth_data) {
4328 /* keep sta info, bssid if matching */
4329 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
4330 ieee80211_destroy_auth_data(sdata, match);
4333 /* prepare assoc data */
4335 ifmgd->beacon_crc_valid = false;
4337 assoc_data->wmm = bss->wmm_used &&
4338 (local->hw.queues >= IEEE80211_NUM_ACS);
4339 if (assoc_data->wmm) {
4340 /* try to check validity of WMM params IE */
4341 const struct cfg80211_bss_ies *ies;
4342 const u8 *wp, *start, *end;
4345 ies = rcu_dereference(req->bss->ies);
4347 end = start + ies->len;
4350 wp = cfg80211_find_vendor_ie(
4352 WLAN_OUI_TYPE_MICROSOFT_WMM,
4353 start, end - start);
4356 start = wp + wp[1] + 2;
4357 /* if this IE is too short, try the next */
4360 /* if this IE is WMM params, we found what we wanted */
4365 if (!wp || !ieee80211_usable_wmm_params(sdata, wp + 2,
4367 assoc_data->wmm = false;
4368 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
4374 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4375 * We still associate in non-HT mode (11a/b/g) if any one of these
4376 * ciphers is configured as pairwise.
4377 * We can set this to true for non-11n hardware, that'll be checked
4378 * separately along with the peer capabilities.
4380 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
4381 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
4382 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
4383 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
4384 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4385 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4386 netdev_info(sdata->dev,
4387 "disabling HT/VHT due to WEP/TKIP use\n");
4391 if (req->flags & ASSOC_REQ_DISABLE_HT) {
4392 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4393 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4396 if (req->flags & ASSOC_REQ_DISABLE_VHT)
4397 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4399 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4400 sband = local->hw.wiphy->bands[req->bss->channel->band];
4401 if (!sband->ht_cap.ht_supported ||
4402 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4403 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4404 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4405 if (!bss->wmm_used &&
4406 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4407 netdev_info(sdata->dev,
4408 "disabling HT as WMM/QoS is not supported by the AP\n");
4411 /* disable VHT if we don't support it or the AP doesn't use WMM */
4412 if (!sband->vht_cap.vht_supported ||
4413 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4414 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4415 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4416 if (!bss->wmm_used &&
4417 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4418 netdev_info(sdata->dev,
4419 "disabling VHT as WMM/QoS is not supported by the AP\n");
4422 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
4423 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
4424 sizeof(ifmgd->ht_capa_mask));
4426 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
4427 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
4428 sizeof(ifmgd->vht_capa_mask));
4430 if (req->ie && req->ie_len) {
4431 memcpy(assoc_data->ie, req->ie, req->ie_len);
4432 assoc_data->ie_len = req->ie_len;
4435 assoc_data->bss = req->bss;
4437 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
4438 if (ifmgd->powersave)
4439 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
4441 sdata->smps_mode = IEEE80211_SMPS_OFF;
4443 sdata->smps_mode = ifmgd->req_smps;
4445 assoc_data->capability = req->bss->capability;
4446 assoc_data->supp_rates = bss->supp_rates;
4447 assoc_data->supp_rates_len = bss->supp_rates_len;
4450 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
4451 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
4452 assoc_data->ap_ht_param =
4453 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
4455 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4456 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
4457 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
4458 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
4459 sizeof(struct ieee80211_vht_cap));
4461 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4464 if (bss->wmm_used && bss->uapsd_supported &&
4465 (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) {
4466 assoc_data->uapsd = true;
4467 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
4469 assoc_data->uapsd = false;
4470 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
4473 if (req->prev_bssid)
4474 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
4477 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
4478 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
4480 ifmgd->mfp = IEEE80211_MFP_DISABLED;
4481 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
4484 if (req->flags & ASSOC_REQ_USE_RRM)
4485 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
4487 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
4489 if (req->crypto.control_port)
4490 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
4492 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
4494 sdata->control_port_protocol = req->crypto.control_port_ethertype;
4495 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
4496 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
4499 /* kick off associate process */
4501 ifmgd->assoc_data = assoc_data;
4502 ifmgd->dtim_period = 0;
4503 ifmgd->have_beacon = false;
4505 err = ieee80211_prep_connection(sdata, req->bss, true);
4510 beacon_ies = rcu_dereference(req->bss->beacon_ies);
4512 if (sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC &&
4515 * Wait up to one beacon interval ...
4516 * should this be more if we miss one?
4518 sdata_info(sdata, "waiting for beacon from %pM\n",
4520 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
4521 assoc_data->timeout_started = true;
4522 assoc_data->need_beacon = true;
4523 } else if (beacon_ies) {
4524 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4529 if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
4530 const struct ieee80211_tim_ie *tim;
4531 tim = (void *)(tim_ie + 2);
4532 ifmgd->dtim_period = tim->dtim_period;
4533 dtim_count = tim->dtim_count;
4535 ifmgd->have_beacon = true;
4536 assoc_data->timeout = jiffies;
4537 assoc_data->timeout_started = true;
4539 if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) {
4540 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
4541 sdata->vif.bss_conf.sync_device_ts =
4542 bss->device_ts_beacon;
4543 sdata->vif.bss_conf.sync_dtim_count = dtim_count;
4546 assoc_data->timeout = jiffies;
4547 assoc_data->timeout_started = true;
4551 run_again(sdata, assoc_data->timeout);
4553 if (bss->corrupt_data) {
4554 char *corrupt_type = "data";
4555 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
4556 if (bss->corrupt_data &
4557 IEEE80211_BSS_CORRUPT_PROBE_RESP)
4558 corrupt_type = "beacon and probe response";
4560 corrupt_type = "beacon";
4561 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
4562 corrupt_type = "probe response";
4563 sdata_info(sdata, "associating with AP with corrupt %s\n",
4569 memset(ifmgd->bssid, 0, ETH_ALEN);
4570 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4571 ifmgd->assoc_data = NULL;
4577 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
4578 struct cfg80211_deauth_request *req)
4580 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4581 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4582 bool tx = !req->local_state_change;
4584 if (ifmgd->auth_data &&
4585 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
4587 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4588 req->bssid, req->reason_code,
4589 ieee80211_get_reason_code_string(req->reason_code));
4591 drv_mgd_prepare_tx(sdata->local, sdata);
4592 ieee80211_send_deauth_disassoc(sdata, req->bssid,
4593 IEEE80211_STYPE_DEAUTH,
4594 req->reason_code, tx,
4596 ieee80211_destroy_auth_data(sdata, false);
4597 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4598 IEEE80211_DEAUTH_FRAME_LEN);
4603 if (ifmgd->associated &&
4604 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
4606 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4607 req->bssid, req->reason_code,
4608 ieee80211_get_reason_code_string(req->reason_code));
4610 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4611 req->reason_code, tx, frame_buf);
4612 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4613 IEEE80211_DEAUTH_FRAME_LEN);
4620 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
4621 struct cfg80211_disassoc_request *req)
4623 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4625 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4628 * cfg80211 should catch this ... but it's racy since
4629 * we can receive a disassoc frame, process it, hand it
4630 * to cfg80211 while that's in a locked section already
4631 * trying to tell us that the user wants to disconnect.
4633 if (ifmgd->associated != req->bss)
4637 "disassociating from %pM by local choice (Reason: %u=%s)\n",
4638 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
4640 memcpy(bssid, req->bss->bssid, ETH_ALEN);
4641 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
4642 req->reason_code, !req->local_state_change,
4645 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4646 IEEE80211_DEAUTH_FRAME_LEN);
4651 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
4653 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4656 * Make sure some work items will not run after this,
4657 * they will not do anything but might not have been
4658 * cancelled when disconnecting.
4660 cancel_work_sync(&ifmgd->monitor_work);
4661 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
4662 cancel_work_sync(&ifmgd->request_smps_work);
4663 cancel_work_sync(&ifmgd->csa_connection_drop_work);
4664 cancel_work_sync(&ifmgd->chswitch_work);
4665 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
4668 if (ifmgd->assoc_data) {
4669 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
4670 ieee80211_destroy_assoc_data(sdata, false);
4671 cfg80211_assoc_timeout(sdata->dev, bss);
4673 if (ifmgd->auth_data)
4674 ieee80211_destroy_auth_data(sdata, false);
4675 del_timer_sync(&ifmgd->timer);
4676 sdata_unlock(sdata);
4679 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
4680 enum nl80211_cqm_rssi_threshold_event rssi_event,
4683 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
4685 trace_api_cqm_rssi_notify(sdata, rssi_event);
4687 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp);
4689 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);