2 * Copyright (c) 2003-2007 Network Appliance, Inc. All rights reserved.
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the BSD-type
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
14 * Redistributions of source code must retain the above copyright
15 * notice, this list of conditions and the following disclaimer.
17 * Redistributions in binary form must reproduce the above
18 * copyright notice, this list of conditions and the following
19 * disclaimer in the documentation and/or other materials provided
20 * with the distribution.
22 * Neither the name of the Network Appliance, Inc. nor the names of
23 * its contributors may be used to endorse or promote products
24 * derived from this software without specific prior written
27 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
28 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
29 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
30 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
31 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
32 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
33 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
34 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
35 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
36 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
37 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
43 * This file contains the top-level implementation of an RPC RDMA
46 * Naming convention: functions beginning with xprt_ are part of the
47 * transport switch. All others are RPC RDMA internal.
50 #include <linux/module.h>
51 #include <linux/slab.h>
52 #include <linux/seq_file.h>
53 #include <linux/sunrpc/addr.h>
55 #include "xprt_rdma.h"
57 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
58 # define RPCDBG_FACILITY RPCDBG_TRANS
65 static unsigned int xprt_rdma_slot_table_entries = RPCRDMA_DEF_SLOT_TABLE;
66 static unsigned int xprt_rdma_max_inline_read = RPCRDMA_DEF_INLINE;
67 static unsigned int xprt_rdma_max_inline_write = RPCRDMA_DEF_INLINE;
68 static unsigned int xprt_rdma_inline_write_padding;
69 static unsigned int xprt_rdma_memreg_strategy = RPCRDMA_FRMR;
70 int xprt_rdma_pad_optimize = 1;
72 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
74 static unsigned int min_slot_table_size = RPCRDMA_MIN_SLOT_TABLE;
75 static unsigned int max_slot_table_size = RPCRDMA_MAX_SLOT_TABLE;
76 static unsigned int zero;
77 static unsigned int max_padding = PAGE_SIZE;
78 static unsigned int min_memreg = RPCRDMA_BOUNCEBUFFERS;
79 static unsigned int max_memreg = RPCRDMA_LAST - 1;
81 static struct ctl_table_header *sunrpc_table_header;
83 static struct ctl_table xr_tunables_table[] = {
85 .procname = "rdma_slot_table_entries",
86 .data = &xprt_rdma_slot_table_entries,
87 .maxlen = sizeof(unsigned int),
89 .proc_handler = proc_dointvec_minmax,
90 .extra1 = &min_slot_table_size,
91 .extra2 = &max_slot_table_size
94 .procname = "rdma_max_inline_read",
95 .data = &xprt_rdma_max_inline_read,
96 .maxlen = sizeof(unsigned int),
98 .proc_handler = proc_dointvec,
101 .procname = "rdma_max_inline_write",
102 .data = &xprt_rdma_max_inline_write,
103 .maxlen = sizeof(unsigned int),
105 .proc_handler = proc_dointvec,
108 .procname = "rdma_inline_write_padding",
109 .data = &xprt_rdma_inline_write_padding,
110 .maxlen = sizeof(unsigned int),
112 .proc_handler = proc_dointvec_minmax,
114 .extra2 = &max_padding,
117 .procname = "rdma_memreg_strategy",
118 .data = &xprt_rdma_memreg_strategy,
119 .maxlen = sizeof(unsigned int),
121 .proc_handler = proc_dointvec_minmax,
122 .extra1 = &min_memreg,
123 .extra2 = &max_memreg,
126 .procname = "rdma_pad_optimize",
127 .data = &xprt_rdma_pad_optimize,
128 .maxlen = sizeof(unsigned int),
130 .proc_handler = proc_dointvec,
135 static struct ctl_table sunrpc_table[] = {
137 .procname = "sunrpc",
139 .child = xr_tunables_table
146 #define RPCRDMA_BIND_TO (60U * HZ)
147 #define RPCRDMA_INIT_REEST_TO (5U * HZ)
148 #define RPCRDMA_MAX_REEST_TO (30U * HZ)
149 #define RPCRDMA_IDLE_DISC_TO (5U * 60 * HZ)
151 static struct rpc_xprt_ops xprt_rdma_procs; /* forward reference */
154 xprt_rdma_format_addresses4(struct rpc_xprt *xprt, struct sockaddr *sap)
156 struct sockaddr_in *sin = (struct sockaddr_in *)sap;
159 snprintf(buf, sizeof(buf), "%08x", ntohl(sin->sin_addr.s_addr));
160 xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);
162 xprt->address_strings[RPC_DISPLAY_NETID] = RPCBIND_NETID_RDMA;
166 xprt_rdma_format_addresses6(struct rpc_xprt *xprt, struct sockaddr *sap)
168 struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)sap;
171 snprintf(buf, sizeof(buf), "%pi6", &sin6->sin6_addr);
172 xprt->address_strings[RPC_DISPLAY_HEX_ADDR] = kstrdup(buf, GFP_KERNEL);
174 xprt->address_strings[RPC_DISPLAY_NETID] = RPCBIND_NETID_RDMA6;
178 xprt_rdma_format_addresses(struct rpc_xprt *xprt, struct sockaddr *sap)
182 switch (sap->sa_family) {
184 xprt_rdma_format_addresses4(xprt, sap);
187 xprt_rdma_format_addresses6(xprt, sap);
190 pr_err("rpcrdma: Unrecognized address family\n");
194 (void)rpc_ntop(sap, buf, sizeof(buf));
195 xprt->address_strings[RPC_DISPLAY_ADDR] = kstrdup(buf, GFP_KERNEL);
197 snprintf(buf, sizeof(buf), "%u", rpc_get_port(sap));
198 xprt->address_strings[RPC_DISPLAY_PORT] = kstrdup(buf, GFP_KERNEL);
200 snprintf(buf, sizeof(buf), "%4hx", rpc_get_port(sap));
201 xprt->address_strings[RPC_DISPLAY_HEX_PORT] = kstrdup(buf, GFP_KERNEL);
203 xprt->address_strings[RPC_DISPLAY_PROTO] = "rdma";
207 xprt_rdma_free_addresses(struct rpc_xprt *xprt)
211 for (i = 0; i < RPC_DISPLAY_MAX; i++)
213 case RPC_DISPLAY_PROTO:
214 case RPC_DISPLAY_NETID:
217 kfree(xprt->address_strings[i]);
222 xprt_rdma_connect_worker(struct work_struct *work)
224 struct rpcrdma_xprt *r_xprt = container_of(work, struct rpcrdma_xprt,
225 rx_connect_worker.work);
226 struct rpc_xprt *xprt = &r_xprt->rx_xprt;
229 xprt_clear_connected(xprt);
231 dprintk("RPC: %s: %sconnect\n", __func__,
232 r_xprt->rx_ep.rep_connected != 0 ? "re" : "");
233 rc = rpcrdma_ep_connect(&r_xprt->rx_ep, &r_xprt->rx_ia);
235 xprt_wake_pending_tasks(xprt, rc);
237 dprintk("RPC: %s: exit\n", __func__);
238 xprt_clear_connecting(xprt);
242 xprt_rdma_inject_disconnect(struct rpc_xprt *xprt)
244 struct rpcrdma_xprt *r_xprt = container_of(xprt, struct rpcrdma_xprt,
247 pr_info("rpcrdma: injecting transport disconnect on xprt=%p\n", xprt);
248 rdma_disconnect(r_xprt->rx_ia.ri_id);
255 * Free all memory associated with the object, including its own.
256 * NOTE: none of the *destroy methods free memory for their top-level
257 * objects, even though they may have allocated it (they do free
258 * private memory). It's up to the caller to handle it. In this
259 * case (RDMA transport), all structure memory is inlined with the
260 * struct rpcrdma_xprt.
263 xprt_rdma_destroy(struct rpc_xprt *xprt)
265 struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
267 dprintk("RPC: %s: called\n", __func__);
269 cancel_delayed_work_sync(&r_xprt->rx_connect_worker);
271 xprt_clear_connected(xprt);
273 rpcrdma_ep_destroy(&r_xprt->rx_ep, &r_xprt->rx_ia);
274 rpcrdma_buffer_destroy(&r_xprt->rx_buf);
275 rpcrdma_ia_close(&r_xprt->rx_ia);
277 xprt_rdma_free_addresses(xprt);
281 dprintk("RPC: %s: returning\n", __func__);
283 module_put(THIS_MODULE);
286 static const struct rpc_timeout xprt_rdma_default_timeout = {
287 .to_initval = 60 * HZ,
288 .to_maxval = 60 * HZ,
292 * xprt_setup_rdma - Set up transport to use RDMA
294 * @args: rpc transport arguments
296 static struct rpc_xprt *
297 xprt_setup_rdma(struct xprt_create *args)
299 struct rpcrdma_create_data_internal cdata;
300 struct rpc_xprt *xprt;
301 struct rpcrdma_xprt *new_xprt;
302 struct rpcrdma_ep *new_ep;
303 struct sockaddr *sap;
306 if (args->addrlen > sizeof(xprt->addr)) {
307 dprintk("RPC: %s: address too large\n", __func__);
308 return ERR_PTR(-EBADF);
311 xprt = xprt_alloc(args->net, sizeof(struct rpcrdma_xprt),
312 xprt_rdma_slot_table_entries,
313 xprt_rdma_slot_table_entries);
315 dprintk("RPC: %s: couldn't allocate rpcrdma_xprt\n",
317 return ERR_PTR(-ENOMEM);
320 /* 60 second timeout, no retries */
321 xprt->timeout = &xprt_rdma_default_timeout;
322 xprt->bind_timeout = RPCRDMA_BIND_TO;
323 xprt->reestablish_timeout = RPCRDMA_INIT_REEST_TO;
324 xprt->idle_timeout = RPCRDMA_IDLE_DISC_TO;
326 xprt->resvport = 0; /* privileged port not needed */
327 xprt->tsh_size = 0; /* RPC-RDMA handles framing */
328 xprt->ops = &xprt_rdma_procs;
331 * Set up RDMA-specific connect data.
334 sap = (struct sockaddr *)&cdata.addr;
335 memcpy(sap, args->dstaddr, args->addrlen);
337 /* Ensure xprt->addr holds valid server TCP (not RDMA)
338 * address, for any side protocols which peek at it */
339 xprt->prot = IPPROTO_TCP;
340 xprt->addrlen = args->addrlen;
341 memcpy(&xprt->addr, sap, xprt->addrlen);
343 if (rpc_get_port(sap))
344 xprt_set_bound(xprt);
346 cdata.max_requests = xprt->max_reqs;
348 cdata.rsize = RPCRDMA_MAX_SEGS * PAGE_SIZE; /* RDMA write max */
349 cdata.wsize = RPCRDMA_MAX_SEGS * PAGE_SIZE; /* RDMA read max */
351 cdata.inline_wsize = xprt_rdma_max_inline_write;
352 if (cdata.inline_wsize > cdata.wsize)
353 cdata.inline_wsize = cdata.wsize;
355 cdata.inline_rsize = xprt_rdma_max_inline_read;
356 if (cdata.inline_rsize > cdata.rsize)
357 cdata.inline_rsize = cdata.rsize;
359 cdata.padding = xprt_rdma_inline_write_padding;
362 * Create new transport instance, which includes initialized
368 new_xprt = rpcx_to_rdmax(xprt);
370 rc = rpcrdma_ia_open(new_xprt, sap, xprt_rdma_memreg_strategy);
375 * initialize and create ep
377 new_xprt->rx_data = cdata;
378 new_ep = &new_xprt->rx_ep;
379 new_ep->rep_remote_addr = cdata.addr;
381 rc = rpcrdma_ep_create(&new_xprt->rx_ep,
382 &new_xprt->rx_ia, &new_xprt->rx_data);
387 * Allocate pre-registered send and receive buffers for headers and
388 * any inline data. Also specify any padding which will be provided
389 * from a preregistered zero buffer.
391 rc = rpcrdma_buffer_create(new_xprt);
396 * Register a callback for connection events. This is necessary because
397 * connection loss notification is async. We also catch connection loss
398 * when reaping receives.
400 INIT_DELAYED_WORK(&new_xprt->rx_connect_worker,
401 xprt_rdma_connect_worker);
403 xprt_rdma_format_addresses(xprt, sap);
404 xprt->max_payload = new_xprt->rx_ia.ri_ops->ro_maxpages(new_xprt);
405 if (xprt->max_payload == 0)
407 xprt->max_payload <<= PAGE_SHIFT;
408 dprintk("RPC: %s: transport data payload maximum: %zu bytes\n",
409 __func__, xprt->max_payload);
411 if (!try_module_get(THIS_MODULE))
414 dprintk("RPC: %s: %s:%s\n", __func__,
415 xprt->address_strings[RPC_DISPLAY_ADDR],
416 xprt->address_strings[RPC_DISPLAY_PORT]);
420 xprt_rdma_free_addresses(xprt);
423 rpcrdma_ep_destroy(new_ep, &new_xprt->rx_ia);
425 rpcrdma_ia_close(&new_xprt->rx_ia);
432 * Close a connection, during shutdown or timeout/reconnect
435 xprt_rdma_close(struct rpc_xprt *xprt)
437 struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
439 dprintk("RPC: %s: closing\n", __func__);
440 if (r_xprt->rx_ep.rep_connected > 0)
441 xprt->reestablish_timeout = 0;
442 xprt_disconnect_done(xprt);
443 rpcrdma_ep_disconnect(&r_xprt->rx_ep, &r_xprt->rx_ia);
447 xprt_rdma_set_port(struct rpc_xprt *xprt, u16 port)
449 struct sockaddr_in *sap;
451 sap = (struct sockaddr_in *)&xprt->addr;
452 sap->sin_port = htons(port);
453 sap = (struct sockaddr_in *)&rpcx_to_rdmad(xprt).addr;
454 sap->sin_port = htons(port);
455 dprintk("RPC: %s: %u\n", __func__, port);
459 xprt_rdma_connect(struct rpc_xprt *xprt, struct rpc_task *task)
461 struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
463 if (r_xprt->rx_ep.rep_connected != 0) {
465 schedule_delayed_work(&r_xprt->rx_connect_worker,
466 xprt->reestablish_timeout);
467 xprt->reestablish_timeout <<= 1;
468 if (xprt->reestablish_timeout > RPCRDMA_MAX_REEST_TO)
469 xprt->reestablish_timeout = RPCRDMA_MAX_REEST_TO;
470 else if (xprt->reestablish_timeout < RPCRDMA_INIT_REEST_TO)
471 xprt->reestablish_timeout = RPCRDMA_INIT_REEST_TO;
473 schedule_delayed_work(&r_xprt->rx_connect_worker, 0);
474 if (!RPC_IS_ASYNC(task))
475 flush_delayed_work(&r_xprt->rx_connect_worker);
480 * The RDMA allocate/free functions need the task structure as a place
481 * to hide the struct rpcrdma_req, which is necessary for the actual send/recv
484 * The RPC layer allocates both send and receive buffers in the same call
485 * (rq_send_buf and rq_rcv_buf are both part of a single contiguous buffer).
486 * We may register rq_rcv_buf when using reply chunks.
489 xprt_rdma_allocate(struct rpc_task *task, size_t size)
491 struct rpc_xprt *xprt = task->tk_rqstp->rq_xprt;
492 struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
493 struct rpcrdma_regbuf *rb;
494 struct rpcrdma_req *req;
498 req = rpcrdma_buffer_get(&r_xprt->rx_buf);
502 flags = GFP_NOIO | __GFP_NOWARN;
503 if (RPC_IS_SWAPPER(task))
504 flags = __GFP_MEMALLOC | GFP_NOWAIT | __GFP_NOWARN;
506 if (req->rl_rdmabuf == NULL)
508 if (req->rl_sendbuf == NULL)
510 if (size > req->rl_sendbuf->rg_size)
514 dprintk("RPC: %s: size %zd, request 0x%p\n", __func__, size, req);
515 req->rl_connect_cookie = 0; /* our reserved value */
516 return req->rl_sendbuf->rg_base;
519 min_size = RPCRDMA_INLINE_WRITE_THRESHOLD(task->tk_rqstp);
520 rb = rpcrdma_alloc_regbuf(&r_xprt->rx_ia, min_size, flags);
523 req->rl_rdmabuf = rb;
526 /* XDR encoding and RPC/RDMA marshaling of this request has not
527 * yet occurred. Thus a lower bound is needed to prevent buffer
528 * overrun during marshaling.
530 * RPC/RDMA marshaling may choose to send payload bearing ops
531 * inline, if the result is smaller than the inline threshold.
532 * The value of the "size" argument accounts for header
533 * requirements but not for the payload in these cases.
535 * Likewise, allocate enough space to receive a reply up to the
536 * size of the inline threshold.
538 * It's unlikely that both the send header and the received
539 * reply will be large, but slush is provided here to allow
540 * flexibility when marshaling.
542 min_size = RPCRDMA_INLINE_READ_THRESHOLD(task->tk_rqstp);
543 min_size += RPCRDMA_INLINE_WRITE_THRESHOLD(task->tk_rqstp);
547 rb = rpcrdma_alloc_regbuf(&r_xprt->rx_ia, size, flags);
552 r_xprt->rx_stats.hardway_register_count += size;
553 rpcrdma_free_regbuf(&r_xprt->rx_ia, req->rl_sendbuf);
554 req->rl_sendbuf = rb;
558 rpcrdma_buffer_put(req);
559 r_xprt->rx_stats.failed_marshal_count++;
564 * This function returns all RDMA resources to the pool.
567 xprt_rdma_free(void *buffer)
569 struct rpcrdma_req *req;
570 struct rpcrdma_xprt *r_xprt;
571 struct rpcrdma_regbuf *rb;
577 rb = container_of(buffer, struct rpcrdma_regbuf, rg_base[0]);
579 r_xprt = container_of(req->rl_buffer, struct rpcrdma_xprt, rx_buf);
581 dprintk("RPC: %s: called on 0x%p\n", __func__, req->rl_reply);
583 for (i = 0; req->rl_nchunks;) {
585 i += r_xprt->rx_ia.ri_ops->ro_unmap(r_xprt,
586 &req->rl_segments[i]);
589 rpcrdma_buffer_put(req);
593 * send_request invokes the meat of RPC RDMA. It must do the following:
594 * 1. Marshal the RPC request into an RPC RDMA request, which means
595 * putting a header in front of data, and creating IOVs for RDMA
596 * from those in the request.
597 * 2. In marshaling, detect opportunities for RDMA, and use them.
598 * 3. Post a recv message to set up asynch completion, then send
599 * the request (rpcrdma_ep_post).
600 * 4. No partial sends are possible in the RPC-RDMA protocol (as in UDP).
604 xprt_rdma_send_request(struct rpc_task *task)
606 struct rpc_rqst *rqst = task->tk_rqstp;
607 struct rpc_xprt *xprt = rqst->rq_xprt;
608 struct rpcrdma_req *req = rpcr_to_rdmar(rqst);
609 struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
612 rc = rpcrdma_marshal_req(rqst);
616 if (req->rl_reply == NULL) /* e.g. reconnection */
617 rpcrdma_recv_buffer_get(req);
619 /* Must suppress retransmit to maintain credits */
620 if (req->rl_connect_cookie == xprt->connect_cookie)
621 goto drop_connection;
622 req->rl_connect_cookie = xprt->connect_cookie;
624 if (rpcrdma_ep_post(&r_xprt->rx_ia, &r_xprt->rx_ep, req))
625 goto drop_connection;
627 rqst->rq_xmit_bytes_sent += rqst->rq_snd_buf.len;
628 rqst->rq_bytes_sent = 0;
632 r_xprt->rx_stats.failed_marshal_count++;
633 dprintk("RPC: %s: rpcrdma_marshal_req failed, status %i\n",
638 xprt_disconnect_done(xprt);
639 return -ENOTCONN; /* implies disconnect */
642 static void xprt_rdma_print_stats(struct rpc_xprt *xprt, struct seq_file *seq)
644 struct rpcrdma_xprt *r_xprt = rpcx_to_rdmax(xprt);
647 if (xprt_connected(xprt))
648 idle_time = (long)(jiffies - xprt->last_used) / HZ;
650 seq_puts(seq, "\txprt:\trdma ");
651 seq_printf(seq, "%u %lu %lu %lu %ld %lu %lu %lu %llu %llu ",
652 0, /* need a local port? */
653 xprt->stat.bind_count,
654 xprt->stat.connect_count,
655 xprt->stat.connect_time,
662 seq_printf(seq, "%lu %lu %lu %llu %llu %llu %llu %lu %lu %lu %lu\n",
663 r_xprt->rx_stats.read_chunk_count,
664 r_xprt->rx_stats.write_chunk_count,
665 r_xprt->rx_stats.reply_chunk_count,
666 r_xprt->rx_stats.total_rdma_request,
667 r_xprt->rx_stats.total_rdma_reply,
668 r_xprt->rx_stats.pullup_copy_count,
669 r_xprt->rx_stats.fixup_copy_count,
670 r_xprt->rx_stats.hardway_register_count,
671 r_xprt->rx_stats.failed_marshal_count,
672 r_xprt->rx_stats.bad_reply_count,
673 r_xprt->rx_stats.nomsg_call_count);
677 xprt_rdma_enable_swap(struct rpc_xprt *xprt)
683 xprt_rdma_disable_swap(struct rpc_xprt *xprt)
688 * Plumbing for rpc transport switch and kernel module
691 static struct rpc_xprt_ops xprt_rdma_procs = {
692 .reserve_xprt = xprt_reserve_xprt_cong,
693 .release_xprt = xprt_release_xprt_cong, /* sunrpc/xprt.c */
694 .alloc_slot = xprt_alloc_slot,
695 .release_request = xprt_release_rqst_cong, /* ditto */
696 .set_retrans_timeout = xprt_set_retrans_timeout_def, /* ditto */
697 .rpcbind = rpcb_getport_async, /* sunrpc/rpcb_clnt.c */
698 .set_port = xprt_rdma_set_port,
699 .connect = xprt_rdma_connect,
700 .buf_alloc = xprt_rdma_allocate,
701 .buf_free = xprt_rdma_free,
702 .send_request = xprt_rdma_send_request,
703 .close = xprt_rdma_close,
704 .destroy = xprt_rdma_destroy,
705 .print_stats = xprt_rdma_print_stats,
706 .enable_swap = xprt_rdma_enable_swap,
707 .disable_swap = xprt_rdma_disable_swap,
708 .inject_disconnect = xprt_rdma_inject_disconnect,
709 #if defined(CONFIG_SUNRPC_BACKCHANNEL)
710 .bc_setup = xprt_rdma_bc_setup,
711 .bc_up = xprt_rdma_bc_up,
712 .bc_free_rqst = xprt_rdma_bc_free_rqst,
713 .bc_destroy = xprt_rdma_bc_destroy,
717 static struct xprt_class xprt_rdma = {
718 .list = LIST_HEAD_INIT(xprt_rdma.list),
720 .owner = THIS_MODULE,
721 .ident = XPRT_TRANSPORT_RDMA,
722 .setup = xprt_setup_rdma,
725 void xprt_rdma_cleanup(void)
729 dprintk("RPCRDMA Module Removed, deregister RPC RDMA transport\n");
730 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
731 if (sunrpc_table_header) {
732 unregister_sysctl_table(sunrpc_table_header);
733 sunrpc_table_header = NULL;
736 rc = xprt_unregister_transport(&xprt_rdma);
738 dprintk("RPC: %s: xprt_unregister returned %i\n",
741 rpcrdma_destroy_wq();
742 frwr_destroy_recovery_wq();
745 int xprt_rdma_init(void)
749 rc = frwr_alloc_recovery_wq();
753 rc = rpcrdma_alloc_wq();
755 frwr_destroy_recovery_wq();
759 rc = xprt_register_transport(&xprt_rdma);
761 rpcrdma_destroy_wq();
762 frwr_destroy_recovery_wq();
766 dprintk("RPCRDMA Module Init, register RPC RDMA transport\n");
768 dprintk("Defaults:\n");
769 dprintk("\tSlots %d\n"
770 "\tMaxInlineRead %d\n\tMaxInlineWrite %d\n",
771 xprt_rdma_slot_table_entries,
772 xprt_rdma_max_inline_read, xprt_rdma_max_inline_write);
773 dprintk("\tPadding %d\n\tMemreg %d\n",
774 xprt_rdma_inline_write_padding, xprt_rdma_memreg_strategy);
776 #if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
777 if (!sunrpc_table_header)
778 sunrpc_table_header = register_sysctl_table(sunrpc_table);