1 #===-- Makefile.config - Local configuration for LLVM ------*- Makefile -*--===#
3 # The LLVM Compiler Infrastructure
5 # This file is distributed under the University of Illinois Open Source
6 # License. See LICENSE.TXT for details.
8 #===------------------------------------------------------------------------===#
10 # This file is included by Makefile.common. It defines paths and other
11 # values specific to a particular installation of LLVM.
13 #===------------------------------------------------------------------------===#
15 # Define LLVM specific info and directories based on the autoconf variables
16 LLVMVersion := @LLVM_VERSION@
18 ###########################################################################
19 # Directory Configuration
20 # This section of the Makefile determines what is where. To be
21 # specific, there are several locations that need to be defined:
23 # o LLVM_SRC_ROOT : The root directory of the LLVM source code.
24 # o LLVM_OBJ_ROOT : The root directory containing the built LLVM code.
26 # o PROJ_SRC_DIR : The directory containing the code to build.
27 # o PROJ_SRC_ROOT : The root directory of the code to build.
29 # o PROJ_OBJ_DIR : The directory in which compiled code will be placed.
30 # o PROJ_OBJ_ROOT : The root directory in which compiled code is placed.
32 ###########################################################################
36 # The macro below is expanded when 'realpath' is not built-in.
37 # Built-in 'realpath' is available on GNU Make 3.81.
38 realpath = $(shell cd $(1); $(PWD))
40 PROJ_OBJ_DIR := $(call realpath, .)
41 PROJ_OBJ_ROOT := $(call realpath, $(PROJ_OBJ_DIR)/$(LEVEL))
44 $(error Projects must define PROJ_SRC_ROOT)
47 $(error Projects must define PROJ_OBJ_ROOT)
49 ifndef PROJ_INSTALL_ROOT
50 $(error Projects must define PROJ_INSTALL_ROOT)
53 $(error Projects must define LLVM_SRC_ROOT)
56 $(error Projects must define LLVM_OBJ_ROOT)
58 PROJ_SRC_DIR := $(call realpath, $(PROJ_SRC_ROOT)/$(patsubst $(PROJ_OBJ_ROOT)%,%,$(PROJ_OBJ_DIR)))
59 prefix := $(PROJ_INSTALL_ROOT)
60 PROJ_prefix := $(prefix)
65 PROJ_bindir := $(PROJ_prefix)/bin
66 PROJ_libdir := $(PROJ_prefix)/lib
67 PROJ_datadir := $(PROJ_prefix)/share
68 PROJ_docsdir := $(PROJ_prefix)/docs/llvm
69 PROJ_etcdir := $(PROJ_prefix)/etc/llvm
70 PROJ_includedir := $(PROJ_prefix)/include
71 PROJ_infodir := $(PROJ_prefix)/info
72 PROJ_mandir := $(PROJ_prefix)/share/man
74 # Determine if we're on a unix type operating system
75 LLVM_ON_UNIX:=@LLVM_ON_UNIX@
76 LLVM_ON_WIN32:=@LLVM_ON_WIN32@
78 # Host operating system for which LLVM will be run.
81 # Target operating system for which LLVM will compile for.
84 # Target hardware architecture
87 # Indicates, whether we're cross-compiling LLVM or not
88 LLVM_CROSS_COMPILING=@LLVM_CROSS_COMPILING@
90 # Executable file extension for build platform (mainly for
91 # tablegen call if we're cross-compiling).
92 BUILD_EXEEXT=@BUILD_EXEEXT@
94 # Compilers for the build platflorm (mainly for tablegen
95 # call if we're cross-compiling).
99 # Triple for configuring build tools when cross-compiling
102 # Target triple (cpu-vendor-os) for which we should generate code
103 TARGET_TRIPLE=@target@
105 # Extra options to compile LLVM with
106 EXTRA_OPTIONS=@EXTRA_OPTIONS@
108 # Extra options to link LLVM with
109 EXTRA_LD_OPTIONS=@EXTRA_LD_OPTIONS@
111 # Endian-ness of the target
114 # Path to the C++ compiler to use. This is an optional setting, which defaults
115 # to whatever your gmake defaults to.
118 # Path to the CC binary, which use used by testcases for native builds.
124 # Path to the library archiver program.
128 # Path to the nm program
131 # The pathnames of the programs we require to build
138 MKDIR := $(PROJ_SRC_ROOT)/autoconf/mkinstalldirs
145 # Paths to miscellaneous programs we hope are present but might not be
153 OCAMLOPT := @OCAMLOPT@
154 OCAMLDEP := @OCAMLDEP@
155 OCAMLDOC := @OCAMLDOC@
157 POD2HTML := @POD2HTML@
162 HAVE_PTHREAD := @HAVE_PTHREAD@
166 # Targets that we should build
167 TARGETS_TO_BUILD=@TARGETS_TO_BUILD@
169 # Path to directory where object files should be stored during a build.
170 # Set OBJ_ROOT to "." if you do not want to use a separate place for
174 # What to pass as rpath flag to g++
177 # What to pass as -rdynamic flag to g++
178 RDYNAMIC := @RDYNAMIC@
180 # These are options that can either be enabled here, or can be enabled on the
181 # make command line (ie, make ENABLE_PROFILING=1):
183 # When ENABLE_LIBCPP is enabled, LLVM uses libc++ by default to build.
185 ENABLE_LIBCPP = @ENABLE_LIBCPP@
187 # When ENABLE_CXX11 is enabled, LLVM uses c++11 mode by default to build.
188 ENABLE_CXX11 = @ENABLE_CXX11@
190 # When ENABLE_WERROR is enabled, we'll pass -Werror on the command line
191 ENABLE_WERROR = @ENABLE_WERROR@
193 # When ENABLE_OPTIMIZED is enabled, LLVM code is optimized and output is put
194 # into the "Release" directories. Otherwise, LLVM code is not optimized and
195 # output is put in the "Debug" directories.
196 #ENABLE_OPTIMIZED = 1
199 # When ENABLE_PROFILING is enabled, profile instrumentation is done
200 # and output is put into the "<Flavor>+Profile" directories, where
201 # <Flavor> is either Debug or Release depending on how other build
202 # flags are set. Otherwise, output is put in the <Flavor>
204 #ENABLE_PROFILING = 1
207 # When DISABLE_ASSERTIONS is enabled, builds of all of the LLVM code will
208 # exclude assertion checks, otherwise they are included.
209 #DISABLE_ASSERTIONS = 1
212 # When ENABLE_EXPENSIVE_CHECKS is enabled, builds of all of the LLVM
213 # code will include expensive checks, otherwise they are excluded.
214 #ENABLE_EXPENSIVE_CHECKS = 0
215 @ENABLE_EXPENSIVE_CHECKS@
217 # When DEBUG_RUNTIME is enabled, the runtime libraries will retain debug
222 # When DEBUG_SYMBOLS is enabled, the compiler libraries will retain debug
227 # The compiler flags to use for optimized builds.
228 OPTIMIZE_OPTION := @OPTIMIZE_OPTION@
230 # When ENABLE_PROFILING is enabled, the llvm source base is built with profile
231 # information to allow gprof to be used to get execution frequencies.
232 #ENABLE_PROFILING = 1
234 # When ENABLE_DOCS is disabled, docs/ will not be built.
235 ENABLE_DOCS = @ENABLE_DOCS@
237 # When ENABLE_DOXYGEN is enabled, the doxygen documentation will be built
238 ENABLE_DOXYGEN = @ENABLE_DOXYGEN@
240 # Do we want to enable threads?
241 ENABLE_THREADS := @ENABLE_THREADS@
243 # Do we want to build with position independent code?
244 ENABLE_PIC := @ENABLE_PIC@
246 # Do we want to build a shared library and link the tools with it?
247 ENABLE_SHARED := @ENABLE_SHARED@
249 # Do we want to link the stdc++ into a shared library? (Cygming)
250 ENABLE_EMBED_STDCXX := @ENABLE_EMBED_STDCXX@
252 # Use -fvisibility-inlines-hidden?
253 ENABLE_VISIBILITY_INLINES_HIDDEN := @ENABLE_VISIBILITY_INLINES_HIDDEN@
255 # Do we want to allow timestamping information into builds?
256 ENABLE_TIMESTAMPS := @ENABLE_TIMESTAMPS@
258 # This option tells the Makefiles to produce verbose output.
259 # It essentially prints the commands that make is executing
262 # Enable JIT for this platform
263 TARGET_HAS_JIT = @TARGET_HAS_JIT@
265 # Shared library extension for host platform.
266 SHLIBEXT = @SHLIBEXT@
268 # Executable file extension for host platform.
271 # Things we just assume are "there"
274 # Get the options for causing archives to link all their content instead of
275 # just missing symbols, and the inverse of that. This is used for certain LLVM
276 # tools that permit loadable modules. It ensures that the LLVM symbols will be
277 # available to those loadable modules.
279 NOLINKALL := @NOLINKALL@
281 # Get the value of HUGE_VAL_SANITY which will be either "yes" or "no" depending
283 HUGE_VAL_SANITY = @HUGE_VAL_SANITY@
285 # Bindings that we should build
286 BINDINGS_TO_BUILD := @BINDINGS_TO_BUILD@
287 ALL_BINDINGS := @ALL_BINDINGS@
288 OCAML_LIBDIR := @OCAML_LIBDIR@
290 # When compiling under Mingw/Cygwin, executables such as tblgen
291 # expect Windows paths, whereas the build system uses Unix paths.
292 # The function SYSPATH transforms Unix paths into Windows paths.
293 ifneq (,$(findstring -mno-cygwin, $(CXX)))
294 SYSPATH = $(shell echo $(1) | cygpath -m -f -)
299 # Location of the plugin header file for gold.
300 BINUTILS_INCDIR := @BINUTILS_INCDIR@
302 # Optional flags supported by the compiler
303 # -Wno-missing-field-initializers
304 NO_MISSING_FIELD_INITIALIZERS = @NO_MISSING_FIELD_INITIALIZERS@
305 # -Wno-variadic-macros
306 NO_VARIADIC_MACROS = @NO_VARIADIC_MACROS@
307 # -Wcovered-switch-default
308 COVERED_SWITCH_DEFAULT = @COVERED_SWITCH_DEFAULT@
310 # Was polly found in tools/polly?
311 LLVM_HAS_POLLY = @LLVM_HAS_POLLY@
312 # Flags supported by the linker.
313 # bfd ld / gold --version-script=file
314 HAVE_LINK_VERSION_SCRIPT = @HAVE_LINK_VERSION_SCRIPT@