2 * sound/oss/pas2_card.c
4 * Detection routine for the Pro Audio Spectrum cards.
7 #include <linux/init.h>
8 #include <linux/interrupt.h>
9 #include <linux/module.h>
10 #include <linux/spinlock.h>
11 #include "sound_config.h"
16 static unsigned char dma_bits[] = {
17 4, 1, 2, 3, 0, 5, 6, 7
20 static unsigned char irq_bits[] = {
21 0, 0, 1, 2, 3, 4, 5, 6, 0, 1, 7, 8, 9, 0, 10, 11
24 static unsigned char sb_irq_bits[] = {
25 0x00, 0x00, 0x08, 0x10, 0x00, 0x18, 0x00, 0x20,
26 0x00, 0x08, 0x28, 0x30, 0x38, 0, 0
29 static unsigned char sb_dma_bits[] = {
30 0x00, 0x40, 0x80, 0xC0, 0, 0, 0, 0
34 * The Address Translation code is used to convert I/O register addresses to
35 * be relative to the given base -register
38 int pas_translate_code = 0;
39 static int pas_intr_mask;
41 static int pas_sb_base;
42 DEFINE_SPINLOCK(pas_lock);
43 #ifndef CONFIG_PAS_JOYSTICK
46 static bool joystick = 1;
49 static bool symphony = 1;
53 #ifdef BROKEN_BUS_CLOCK
54 static bool broken_bus_clock = 1;
56 static bool broken_bus_clock;
59 static struct address_info cfg;
60 static struct address_info cfg2;
63 static char *pas_model_names[] = {
67 "Pro AudioSpectrum 16",
68 "Pro AudioSpectrum 16D"
72 * pas_read() and pas_write() are equivalents of inb and outb
73 * These routines perform the I/O address translation required
74 * to support other than the default base address
77 unsigned char pas_read(int ioaddr)
79 return inb(ioaddr + pas_translate_code);
82 void pas_write(unsigned char data, int ioaddr)
84 outb((data), ioaddr + pas_translate_code);
87 /******************* Begin of the Interrupt Handler ********************/
89 static irqreturn_t pasintr(int irq, void *dev_id)
93 status = pas_read(0x0B89);
94 pas_write(status, 0x0B89); /* Clear interrupt */
98 pas_pcm_interrupt(status, 1);
103 pas_midi_interrupt();
109 int pas_set_intr(int mask)
114 pas_intr_mask |= mask;
116 pas_write(pas_intr_mask, 0x0B8B);
120 int pas_remove_intr(int mask)
125 pas_intr_mask &= ~mask;
126 pas_write(pas_intr_mask, 0x0B8B);
131 /******************* End of the Interrupt handler **********************/
133 /******************* Begin of the Initialization Code ******************/
135 static int __init config_pas_hw(struct address_info *hw_config)
138 unsigned int_ptrs; /* scsi/sound interrupt pointers */
140 pas_irq = hw_config->irq;
142 pas_write(0x00, 0x0B8B);
143 pas_write(0x36, 0x138B);
144 pas_write(0x36, 0x1388);
145 pas_write(0, 0x1388);
146 pas_write(0x74, 0x138B);
147 pas_write(0x74, 0x1389);
148 pas_write(0, 0x1389);
150 pas_write(0x80 | 0x40 | 0x20 | 1, 0x0B8A);
151 pas_write(0x80 | 0x20 | 0x10 | 0x08 | 0x01, 0xF8A);
152 pas_write(0x01 | 0x02 | 0x04 | 0x10 /*
157 pas_write(0x80 | (joystick ? 0x40 : 0), 0xF388);
159 if (pas_irq < 0 || pas_irq > 15)
161 printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
167 int_ptrs = pas_read(0xF38A);
168 int_ptrs = (int_ptrs & 0xf0) | irq_bits[pas_irq];
169 pas_write(int_ptrs, 0xF38A);
170 if (!irq_bits[pas_irq])
172 printk(KERN_ERR "PAS16: Invalid IRQ %d", pas_irq);
178 if (request_irq(pas_irq, pasintr, 0, "PAS16",hw_config) < 0) {
179 printk(KERN_ERR "PAS16: Cannot allocate IRQ %d\n",pas_irq);
186 if (hw_config->dma < 0 || hw_config->dma > 7)
188 printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
194 pas_write(dma_bits[hw_config->dma], 0xF389);
195 if (!dma_bits[hw_config->dma])
197 printk(KERN_ERR "PAS16: Invalid DMA selection %d", hw_config->dma);
203 if (sound_alloc_dma(hw_config->dma, "PAS16"))
205 printk(KERN_ERR "pas2_card.c: Can't allocate DMA channel\n");
213 * This fixes the timing problems of the PAS due to the Symphony chipset
214 * as per Media Vision. Only define this if your PAS doesn't work correctly.
224 pas_write(0x01 | 0x10 | 0x20 | 0x04, 0x8388);
227 * pas_write(0x01, 0x8388);
229 pas_write(0x01 | 0x10 | 0x20, 0x8388);
231 pas_write(0x18, 0x838A); /* ??? */
232 pas_write(0x20 | 0x01, 0x0B8A); /* Mute off, filter = 17.897 kHz */
233 pas_write(8, 0xBF8A);
235 mix_write(0x80 | 5, 0x078B);
236 mix_write(5, 0x078B);
239 struct address_info *sb_config;
242 if (sb_config->io_base)
244 unsigned char irq_dma;
247 * Turn on Sound Blaster compatibility
248 * bit 1 = SB emulation
249 * bit 0 = MPU401 emulation (CDPC only :-( )
252 pas_write(0x02, 0xF788);
255 * "Emulation address"
258 pas_write((sb_config->io_base >> 4) & 0x0f, 0xF789);
259 pas_sb_base = sb_config->io_base;
261 if (!sb_dma_bits[sb_config->dma])
262 printk(KERN_ERR "PAS16 Warning: Invalid SB DMA %d\n\n", sb_config->dma);
264 if (!sb_irq_bits[sb_config->irq])
265 printk(KERN_ERR "PAS16 Warning: Invalid SB IRQ %d\n\n", sb_config->irq);
267 irq_dma = sb_dma_bits[sb_config->dma] |
268 sb_irq_bits[sb_config->irq];
270 pas_write(irq_dma, 0xFB8A);
273 pas_write(0x00, 0xF788);
277 printk(KERN_WARNING "PAS16: Driver not enabled\n");
282 static int __init detect_pas_hw(struct address_info *hw_config)
284 unsigned char board_id, foo;
287 * WARNING: Setting an option like W:1 or so that disables warm boot reset
288 * of the card will screw up this detect code something fierce. Adding code
289 * to handle this means possibly interfering with other cards on the bus if
290 * you have something on base port 0x388. SO be forewarned.
293 outb((0xBC), 0x9A01); /* Activate first board */
294 outb((hw_config->io_base >> 2), 0x9A01); /* Set base address */
295 pas_translate_code = hw_config->io_base - 0x388;
296 pas_write(1, 0xBF88); /* Select one wait states */
298 board_id = pas_read(0x0B8B);
300 if (board_id == 0xff)
304 * We probably have a PAS-series board, now check for a PAS16-series board
305 * by trying to change the board revision bits. PAS16-series hardware won't
306 * let you do this - the bits are read-only.
309 foo = board_id ^ 0xe0;
311 pas_write(foo, 0x0B8B);
312 foo = pas_read(0x0B8B);
313 pas_write(board_id, 0x0B8B);
318 pas_model = pas_read(0xFF88);
323 static void __init attach_pas_card(struct address_info *hw_config)
325 pas_irq = hw_config->irq;
327 if (detect_pas_hw(hw_config))
330 if ((pas_model = pas_read(0xFF88)))
335 pas_model >= ARRAY_SIZE(pas_model_names)) {
336 printk(KERN_ERR "pas2 unrecognized model.\n");
340 "%s rev %d", pas_model_names[(int) pas_model],
342 conf_printf(temp, hw_config);
344 if (config_pas_hw(hw_config))
346 pas_pcm_init(hw_config);
353 static inline int __init probe_pas(struct address_info *hw_config)
355 return detect_pas_hw(hw_config);
358 static void __exit unload_pas(struct address_info *hw_config)
360 extern int pas_audiodev;
361 extern int pas2_mididev;
363 if (hw_config->dma>0)
364 sound_free_dma(hw_config->dma);
365 if (hw_config->irq>0)
366 free_irq(hw_config->irq, hw_config);
369 sound_unload_mixerdev(audio_devs[pas_audiodev]->mixer_dev);
371 sound_unload_mididev(pas2_mididev);
373 sound_unload_audiodev(pas_audiodev);
376 static int __initdata io = -1;
377 static int __initdata irq = -1;
378 static int __initdata dma = -1;
379 static int __initdata dma16 = -1; /* Set this for modules that need it */
381 static int __initdata sb_io = 0;
382 static int __initdata sb_irq = -1;
383 static int __initdata sb_dma = -1;
384 static int __initdata sb_dma16 = -1;
386 module_param(io, int, 0);
387 module_param(irq, int, 0);
388 module_param(dma, int, 0);
389 module_param(dma16, int, 0);
391 module_param(sb_io, int, 0);
392 module_param(sb_irq, int, 0);
393 module_param(sb_dma, int, 0);
394 module_param(sb_dma16, int, 0);
396 module_param(joystick, bool, 0);
397 module_param(symphony, bool, 0);
398 module_param(broken_bus_clock, bool, 0);
400 MODULE_LICENSE("GPL");
402 static int __init init_pas2(void)
404 printk(KERN_INFO "Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996\n");
411 cfg2.io_base = sb_io;
414 cfg2.dma2 = sb_dma16;
416 if (cfg.io_base == -1 || cfg.dma == -1 || cfg.irq == -1) {
417 printk(KERN_INFO "I/O, IRQ, DMA and type are mandatory\n");
421 if (!probe_pas(&cfg))
423 attach_pas_card(&cfg);
428 static void __exit cleanup_pas2(void)
433 module_init(init_pas2);
434 module_exit(cleanup_pas2);
437 static int __init setup_pas2(char *str)
439 /* io, irq, dma, dma2, sb_io, sb_irq, sb_dma, sb_dma2 */
442 str = get_options(str, ARRAY_SIZE(ints), ints);
457 __setup("pas2=", setup_pas2);