2 * jjPlus JWAP003 board support
6 #include <asm/mach-ar71xx/ar71xx.h>
8 #include <linux/i2c-gpio.h>
9 #include <linux/platform_device.h>
13 #include "dev-m25p80.h"
14 #include "dev-gpio-buttons.h"
15 #include "dev-pb42-pci.h"
18 #define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */
19 #define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL)
21 #define JWAP003_GPIO_WPS 11
22 #define JWAP003_GPIO_I2C_SCL 0
23 #define JWAP003_GPIO_I2C_SDA 1
25 static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
29 .code = KEY_WPS_BUTTON,
30 .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
31 .gpio = JWAP003_GPIO_WPS,
36 static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
37 .sda_pin = JWAP003_GPIO_I2C_SDA,
38 .scl_pin = JWAP003_GPIO_I2C_SCL,
41 static struct platform_device jwap003_i2c_gpio_device = {
45 .platform_data = &jwap003_i2c_gpio_data,
49 static const char *jwap003_part_probes[] = {
54 static struct flash_platform_data jwap003_flash_data = {
55 .part_probes = jwap003_part_probes,
58 #define JWAP003_WAN_PHYMASK BIT(0)
59 #define JWAP003_LAN_PHYMASK BIT(4)
61 static void __init jwap003_init(void)
63 ar71xx_add_device_m25p80(&jwap003_flash_data);
65 ar71xx_add_device_mdio(0, 0x0);
67 ar71xx_init_mac(ar71xx_eth0_data.mac_addr, ar71xx_mac_base, 0);
68 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
69 ar71xx_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
70 ar71xx_eth0_data.speed = SPEED_100;
71 ar71xx_eth0_data.duplex = DUPLEX_FULL;
72 ar71xx_eth0_data.has_ar8216 = 1;
74 ar71xx_init_mac(ar71xx_eth1_data.mac_addr, ar71xx_mac_base, 1);
75 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
76 ar71xx_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
77 ar71xx_eth1_data.speed = SPEED_100;
78 ar71xx_eth1_data.duplex = DUPLEX_FULL;
80 ar71xx_add_device_eth(0);
81 ar71xx_add_device_eth(1);
83 platform_device_register(&jwap003_i2c_gpio_device);
85 ar71xx_add_device_usb();
87 ar71xx_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
88 ARRAY_SIZE(jwap003_gpio_keys),
94 MIPS_MACHINE(AR71XX_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);