2 * Planex MZK-W300NH board support
4 * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License version 2 as published
9 * by the Free Software Foundation.
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/input.h>
17 #include <asm/mips_machine.h>
19 #include <asm/mach-ar71xx/ar71xx.h>
22 #include "dev-m25p80.h"
23 #include "dev-ar913x-wmac.h"
25 #define MZK_W300NH_GPIO_LED_STATUS 1
26 #define MZK_W300NH_GPIO_LED_WPS 3
27 #define MZK_W300NH_GPIO_LED_WLAN 6
28 #define MZK_W300NH_GPIO_LED_AP 15
29 #define MZK_W300NH_GPIO_LED_ROUTER 16
31 #define MZK_W300NH_GPIO_BTN_APROUTER 5
32 #define MZK_W300NH_GPIO_BTN_WPS 12
33 #define MZK_W300NH_GPIO_BTN_RESET 21
35 #define MZK_W04NU_BUTTONS_POLL_INTERVAL 20
37 #ifdef CONFIG_MTD_PARTITIONS
38 static struct mtd_partition mzk_w300nh_partitions[] = {
43 .mask_flags = MTD_WRITEABLE,
64 .mask_flags = MTD_WRITEABLE,
71 #endif /* CONFIG_MTD_PARTITIONS */
73 static struct flash_platform_data mzk_w300nh_flash_data = {
74 #ifdef CONFIG_MTD_PARTITIONS
75 .parts = mzk_w300nh_partitions,
76 .nr_parts = ARRAY_SIZE(mzk_w300nh_partitions),
80 static struct gpio_led mzk_w300nh_leds_gpio[] __initdata = {
82 .name = "mzk-w300nh:green:status",
83 .gpio = MZK_W300NH_GPIO_LED_STATUS,
86 .name = "mzk-w300nh:blue:wps",
87 .gpio = MZK_W300NH_GPIO_LED_WPS,
90 .name = "mzk-w300nh:green:wlan",
91 .gpio = MZK_W300NH_GPIO_LED_WLAN,
94 .name = "mzk-w300nh:green:ap",
95 .gpio = MZK_W300NH_GPIO_LED_AP,
98 .name = "mzk-w300nh:green:router",
99 .gpio = MZK_W300NH_GPIO_LED_ROUTER,
104 static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = {
110 .gpio = MZK_W300NH_GPIO_BTN_RESET,
117 .gpio = MZK_W300NH_GPIO_BTN_WPS,
124 .gpio = MZK_W300NH_GPIO_BTN_APROUTER,
129 static void __init mzk_w300nh_setup(void)
131 u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
133 ar71xx_set_mac_base(mac);
135 ar71xx_add_device_mdio(0x0);
137 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
138 ar71xx_eth0_data.phy_mask = 0xf;
139 ar71xx_eth0_data.speed = SPEED_100;
140 ar71xx_eth0_data.duplex = DUPLEX_FULL;
141 ar71xx_eth0_data.has_ar8216 = 1;
143 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
144 ar71xx_eth1_data.phy_mask = 0x10;
146 ar71xx_add_device_eth(0);
147 ar71xx_add_device_eth(1);
149 ar71xx_add_device_m25p80(&mzk_w300nh_flash_data);
151 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(mzk_w300nh_leds_gpio),
152 mzk_w300nh_leds_gpio);
154 ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
155 ARRAY_SIZE(mzk_w300nh_gpio_buttons),
156 mzk_w300nh_gpio_buttons);
157 ar913x_add_device_wmac();
160 MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "Planex MZK-W300NH", mzk_w300nh_setup);