target/linux/lantiq/dts/ARV7510PW22.dts

   1 /dts-v1/;
   2
   3 #include "danube.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "ARV7510PW22 - Astoria Networks";
   9
  10         aliases {
  11                 led-boot = &power;
  12                 led-failsafe = &power;
  13                 led-running = &power;
  14
  15                 led-internet = &internet;
  16                 led-usb = &umts;
  17                 led-wifi = &wlan;
  18         };
  19
  20         memory@0 {
  21                 reg = <0x0 0x4000000>;
  22         };
  23
  24         sram@1F000000 {
  25                 vmmc@107000 {
  26                         status = "okay";
  27                         gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
  28                 };
  29         };
  30
  31         fpi@10000000 {
  32                 localbus@0 {
  33                         nor-boot@0 {
  34                                 compatible = "lantiq,nor";
  35                                 bank-width = <2>;
  36                                 reg = <0 0x0 0x1000000>;
  37                                 #address-cells = <1>;
  38                                 #size-cells = <1>;
  39
  40                                 partitions {
  41                                         compatible = "fixed-partitions";
  42                                         #address-cells = <1>;
  43                                         #size-cells = <1>;
  44
  45                                         partition@0 {
  46                                                 label = "uboot";
  47                                                 reg = <0x00000 0x40000>;
  48                                                 read-only;
  49                                         };
  50
  51                                         partition@40000 {
  52                                                 label = "uboot_env";
  53                                                 reg = <0x40000 0x20000>;
  54                                                 read-only;
  55                                         };
  56
  57                                         partition@60000 {
  58                                                 label = "firmware";
  59                                                 reg = <0x60000 0xf80000>;
  60                                         };
  61
  62                                         boardconfig: partition@fe0000 {
  63                                                 label = "board_config";
  64                                                 reg = <0xfe0000 0x20000>;
  65                                                 read-only;
  66                                         };
  67                                 };
  68                         };
  69                 };
  70
  71                 gpio: pinmux@E100B10 {
  72                         pinctrl-names = "default";
  73                         pinctrl-0 = <&state_default>;
  74
  75                         state_default: pinmux {
  76                                 exin {
  77                                         lantiq,groups = "exin1";
  78                                         lantiq,function = "exin";
  79                                         lantiq,pull = <2>;
  80                                         lantiq,output = <0>;
  81                                 };
  82                                 pci_in {
  83                                         lantiq,groups = "req1", "req2";
  84                                         lantiq,function = "pci";
  85                                         lantiq,open-drain = <1>;
  86                                         lantiq,pull = <2>;
  87                                         lantiq,output = <0>;
  88                                 };
  89                                 pci_out {
  90                                         lantiq,groups = "gnt1";
  91                                         lantiq,function = "pci";
  92                                         lantiq,output = <1>;
  93                                 };
  94                                 pci_rst {
  95                                         lantiq,pins = "io21";
  96                                         lantiq,pull = <2>;
  97                                         lantiq,output = <1>;
  98                                 };
  99                                 pins_out {
 100                                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
 101                                         lantiq,output = <1>;
 102                                 };
 103                                 pins_in {
 104                                         lantiq,pins = "io11", "io12", "io28";
 105                                         lantiq,open-drain = <1>;
 106                                         lantiq,pull = <2>;
 107                                         lantiq,output = <0>;
 108                                 };
 109                         };
 110                 };
 111
 112                 ifxhcd@E101000 {
 113                         status = "okay";
 114                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
 115                 };
 116
 117                 etop@E180000 {
 118                         /* Switch reset 19 */
 119                         phy-mode = "mii";
 120                         mtd-mac-address = <&boardconfig 0x16>;
 121                 };
 122         };
 123
 124         gpio-keys-polled {
 125                 compatible = "gpio-keys-polled";
 126                 #address-cells = <1>;
 127                 #size-cells = <0>;
 128                 poll-interval = <100>;
 129
 130                 rfkill {
 131                         label = "rfkill";
 132                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 133                         linux,code = <KEY_RFKILL>;
 134                 };
 135                 restart {
 136                         label = "restart";
 137                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 138                         linux,code = <KEY_POWER>;
 139                 };
 140                 reset {
 141                         label = "reset";
 142                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 143                         linux,code = <KEY_RESTART>;
 144                 };
 145         };
 146
 147         gpio-leds {
 148                 compatible = "gpio-leds";
 149                 power: power {
 150                         label = "power";
 151                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 152                         default-state = "keep";
 153                 };
 154                 internet: internet {
 155                         label = "internet";
 156                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 157                 };
 158                 wlan: wlan {
 159                         label = "wlan";
 160                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 161                 };
 162                 umts: 3g {
 163                         label = "3g";
 164                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 165                 };
 166                 message {
 167                         label = "message";
 168                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 169                 };
 170         };
 171 };
 172
 173 &pci0 {
 174         status = "okay";
 175         lantiq,external-clock;
 176         interrupt-map = <
 177                 0x7000 0 0 1 &icu0 30
 178                 0x7800 0 0 1 &icu0 135
 179                 0x7800 0 0 2 &icu0 135
 180                 0x7800 0 0 3 &icu0 135
 181         >;
 182         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 183         req-mask = <0x3>;
 184
 185         wifi@1814,3592 {
 186                 compatible = "pci1814,3592";
 187                 reg = <0x7000 0 0 0 0>;
 188                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 189                 ralink,mtd-eeprom-swap;
 190         };
 191 };