lantiq: fix mac address increments
[lede.git] / target / linux / lantiq / dts / ARV7510PW22.dts
1 /dts-v1/;
2
3 /include/ "danube.dtsi"
4
5 / {
6         model = "ARV7510PW22 - Astoria Networks";
7
8         chosen {
9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10
11                 leds {
12                         boot = &power;
13                         failsafe = &power;
14                         running = &power;
15
16                         internet = &internet;
17                         wifi = &wlan;
18                 };
19         };
20
21         memory@0 {
22                 reg = <0x0 0x4000000>;
23         };
24
25         sram@1F000000 {
26                 vmmc@107000 {
27                         status = "okay";
28                         gpios = <&gpio 9 0>;
29                 };
30         };
31
32         fpi@10000000 {
33                 localbus@0 {
34                         nor-boot@0 {
35                                 compatible = "lantiq,nor";
36                                 bank-width = <2>;
37                                 reg = <0 0x0 0x1000000>;
38                                 #address-cells = <1>;
39                                 #size-cells = <1>;
40
41                                 partitions {
42                                         compatible = "fixed-partitions";
43                                         #address-cells = <1>;
44                                         #size-cells = <1>;
45
46                                         partition@0 {
47                                                 label = "uboot";
48                                                 reg = <0x00000 0x40000>;
49                                                 read-only;
50                                         };
51
52                                         partition@40000 {
53                                                 label = "uboot_env";
54                                                 reg = <0x40000 0x20000>;
55                                                 read-only;
56                                         };
57
58                                         partition@60000 {
59                                                 label = "firmware";
60                                                 reg = <0x60000 0xf80000>;
61                                         };
62
63                                         partition@fe0000 {
64                                                 label = "board_config";
65                                                 reg = <0xfe0000 0x20000>;
66                                                 read-only;
67                                         };
68                                 };
69                         };
70
71                         mac_addr {
72                                 compatible = "lantiq,eth-mac";
73                                 reg = <0 0xfe0016 0x6>;
74                         };
75                 };
76
77                 gpio: pinmux@E100B10 {
78                         pinctrl-names = "default";
79                         pinctrl-0 = <&state_default>;
80
81                         state_default: pinmux {
82                                 exin {
83                                         lantiq,groups = "exin1";
84                                         lantiq,function = "exin";
85                                         lantiq,pull = <2>;
86                                         lantiq,output = <0>;
87                                 };
88                                 pci_in {
89                                         lantiq,groups = "req1", "req2";
90                                         lantiq,function = "pci";
91                                         lantiq,open-drain = <1>;
92                                         lantiq,pull = <2>;
93                                         lantiq,output = <0>;
94                                 };
95                                 pci_out {
96                                         lantiq,groups = "gnt1";
97                                         lantiq,function = "pci";
98                                         lantiq,output = <1>;
99                                 };
100                                 pci_rst {
101                                         lantiq,pins = "io21";
102                                         lantiq,pull = <2>;
103                                         lantiq,output = <1>;
104                                 };
105                                 pins_out {
106                                         lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20";
107                                         lantiq,output = <1>;
108                                 };
109                                 pins_in {
110                                         lantiq,pins = "io11", "io12", "io28";
111                                         lantiq,open-drain = <1>;
112                                         lantiq,pull = <2>;
113                                         lantiq,output = <0>;
114                                 };
115                         };
116                 };
117
118                 ifxhcd@E101000 {
119                         status = "okay";
120                         gpios = <&gpio 8 0>;
121                 };
122
123                 etop@E180000 {
124                         phy-mode = "mii";
125                         /* Switch reset 19 */
126                 };
127
128                 pci@E105400 {
129                         status = "okay";
130                         lantiq,external-clock;
131                         interrupt-map = <
132                                 0x7000 0 0 1 &icu0 30
133                                 0x7800 0 0 1 &icu0 135
134                                 0x7800 0 0 2 &icu0 135
135                                 0x7800 0 0 3 &icu0 135
136                         >;
137                         gpio-reset = <&gpio 21 0>;
138                         req-mask = <0x3>;
139                 };
140         };
141
142         ralink_eep {
143                 compatible = "ralink,eeprom";
144                 ralink,eeprom = "RT2860.eeprom";
145         };
146
147         gpio-keys-polled {
148                 compatible = "gpio-keys-polled";
149                 #address-cells = <1>;
150                 #size-cells = <0>;
151                 poll-interval = <100>;
152
153                 rfkill {
154                         label = "rfkill";
155                         gpios = <&gpio 11 1>;
156                         linux,code = <0xf7>;
157                 };
158                 restart {
159                         label = "restart";
160                         gpios = <&gpio 12 1>;
161                         linux,code = <0x100>;
162                 };
163                 reset {
164                         label = "reset";
165                         gpios = <&gpio 28 1>;
166                         linux,code = <0x198>;
167                 };
168         };
169
170         gpio-leds {
171                 compatible = "gpio-leds";
172                 power: power {
173                         label = "power";
174                         gpios = <&gpio 2 1>;
175                         default-state = "keep";
176                 };
177                 internet: internet {
178                         label = "internet";
179                         gpios = <&gpio 4 1>;
180                 };
181                 wlan: wlan {
182                         label = "wlan";
183                         gpios = <&gpio 10 1>;
184                 };
185                 3g {
186                         label = "3g";
187                         gpios = <&gpio 15 1>;
188                 };
189                 message {
190                         label = "message";
191                         gpios = <&gpio 20 1>;
192                 };
193         };
194 };