6 model = "FRITZ3370 - Fritz!Box WLAN 3370";
9 bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9";
13 internet = &info_green;
21 reg = <0x0 0x8000000>;
27 compatible = "gen_nand", "lantiq,nand-xway";
29 reg = <1 0x0 0x2000000>;
40 reg = <0x400000 0x3000000>;
44 label = "vr9_firmware";
45 reg = <0x3400000 0x400000>;
49 reg = <0x3800000 0x3000000>;
53 reg = <0x6800000 0x200000>;
56 label = "nand-filesystem";
57 reg = <0x6a00000 0x1600000>;
62 gpio: pinmux@E100B10 {
63 pinctrl-names = "default";
64 pinctrl-0 = <&state_default>;
66 state_default: pinmux {
68 lantiq,groups = "spi", "spi_cs4";
69 lantiq,function = "gpio";
72 lantiq,groups = "mdio";
73 lantiq,function = "mdio";
76 lantiq,groups = "nand cle", "nand ale",
77 "nand rd", "nand cs1", "nand rdy";
78 lantiq,function = "ebu";
82 lantiq,pins = "io37", "io44";
84 lantiq,open-drain = <0>;
98 compatible = "lantiq,xrx200-net";
99 reg = < 0xE108000 0x3000 /* switch */
100 0xE10B100 0x70 /* mdio */
101 0xE10B1D8 0x30 /* mii */
102 0xE10B308 0x30 /* pmac */
104 interrupt-parent = <&icu0>;
105 interrupts = <73 72>;
108 compatible = "lantiq,xrx200-pdi";
109 #address-cells = <1>;
112 mac-address = [ 00 11 22 33 44 55 ];
116 compatible = "lantiq,xrx200-pdi-port";
119 phy-handle = <&phy0>;
120 gpios = <&gpio 37 0>;
123 compatible = "lantiq,xrx200-pdi-port";
126 phy-handle = <&phy1>;
127 gpios = <&gpio 44 0>;
130 compatible = "lantiq,xrx200-pdi-port";
133 phy-handle = <&phy11>;
136 compatible = "lantiq,xrx200-pdi-port";
139 phy-handle = <&phy13>;
144 #address-cells = <1>;
146 compatible = "lantiq,xrx200-mdio";
147 phy0: ethernet-phy@0 {
149 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
151 phy1: ethernet-phy@1 {
153 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
155 phy11: ethernet-phy@11 {
157 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
159 phy13: ethernet-phy@13 {
161 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
170 lantiq,portmask = <0x3>;
175 #address-cells = <1>;
178 compatible = "spi-gpio";
180 gpio-miso = <&gpio 16 0>;
181 gpio-mosi = <&gpio 17 0>;
182 gpio-sck = <&gpio 18 0>;
183 num-chipselects = <1>;
184 cs-gpios = <&gpio 10 1>;
187 #address-cells = <1>;
189 compatible = "jedec,spi-nor";
191 spi-max-frequency = <1000000>;
193 ath9k_cal: partition@0 {
200 reg = <0x20000 0x10000>;
206 reg = <0x30000 0x10000>;
214 compatible = "ath9k,eeprom";
215 ath,eep-flash = <&ath9k_cal 0x985>;
221 compatible = "lantiq,phy-xrx200";
222 firmware = "lantiq/vr9_phy11g_a1x.bin";
227 compatible = "gpio-keys-polled";
228 #address-cells = <1>;
230 poll-interval = <100>;
234 linux,code = <0x100>;
238 gpios = <&gpio 29 0>;
239 linux,code = <0x101>;
244 compatible = "gpio-leds";
248 gpios = <&gpio 32 1>;
252 gpios = <&gpio 33 1>;
256 gpios = <&gpio 34 1>;
260 gpios = <&gpio 35 1>;
264 gpios = <&gpio 36 1>;
268 gpios = <&gpio 38 1>;
270 info_green: info_green {
271 label = "info_green";
272 gpios = <&gpio 47 1>;