target/linux/lantiq/dts/FRITZ7320.dts

   1 /dts-v1/;
   2
   3 #include "ar9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "FRITZ7320 - 1&1 HomeServer";
   9
  10         chosen {
  11                 bootargs = "console=ttyLTQ0,115200";
  12         };
  13
  14         aliases {
  15                 led-boot = &power;
  16                 led-failsafe = &power;
  17                 led-running = &power;
  18
  19                 led-internet = &info_green;
  20                 led-dsl = &power;
  21                 led-wifi = &wlan;
  22         };
  23
  24         memory@0 {
  25                 reg = <0x0 0x4000000>;
  26         };
  27
  28         fpi@10000000 {
  29                 localbus@0 {
  30                         nor-boot@0 {
  31                                 compatible = "lantiq,nor";
  32                                 bank-width = <2>;
  33                                 reg = <0 0x0 0x1000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36
  37                                 partitions {
  38                                         compatible = "fixed-partitions";
  39                                         #address-cells = <1>;
  40                                         #size-cells = <1>;
  41
  42                                         ath9k_cal: partition@0 {
  43                                                 label = "urlader";
  44                                                 reg = <0x00000 0x20000>;
  45                                                 read-only;
  46                                         };
  47
  48                                         partition@20000 {
  49                                                 label = "firmware";
  50                                                 reg = <0x20000 0xf60000>;
  51                                         };
  52
  53                                         partition@f80000 {
  54                                                 label = "tffs (1)";
  55                                                 reg = <0xf80000 0x40000>;
  56                                                 read-only;
  57                                         };
  58
  59                                         partition@fc0000 {
  60                                                 label = "tffs (2)";
  61                                                 reg = <0xfc0000 0x40000>;
  62                                                 read-only;
  63                                         };
  64                                 };
  65                         };
  66                 };
  67
  68                 gpio: pinmux@E100B10 {
  69                         pinctrl-names = "default";
  70                         pinctrl-0 = <&state_default>;
  71
  72                         state_default: pinmux {
  73                                 pci {
  74                                         lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
  75                                         lantiq,function = "pci";
  76                                 };
  77                                 pci-in {
  78                                         lantiq,groups = "req1", "req2", "req3", "req4";
  79                                         lantiq,output = <0>;
  80                                         lantiq,open-drain = <1>;
  81                                         lantiq,pull = <2>;
  82                                 };
  83                                 pci-out {
  84                                         lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
  85                                         lantiq,output = <1>;
  86                                         lantiq,pull = <0>;
  87                                 };
  88                         };
  89                 };
  90
  91                 etop@E180000 {
  92                         phy-mode = "mii";
  93                 };
  94
  95                 ifxhcd@E101000 {
  96                         status = "okay";
  97                 };
  98         };
  99
 100         gpio-keys-polled {
 101                 compatible = "gpio-keys-polled";
 102                 #address-cells = <1>;
 103                 #size-cells = <0>;
 104                 poll-interval = <100>;
 105
 106                 rfkill {
 107                         label = "rfkill";
 108                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
 109                         linux,code = <KEY_RFKILL>;
 110                 };
 111                 dect {
 112                         label = "dect";
 113                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 114                         linux,code = <KEY_PHONE>;
 115                 };
 116         };
 117
 118         gpio-leds {
 119                 compatible = "gpio-leds";
 120                 power: power {
 121                         label = "fritz7320:green:power";
 122                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
 123                         default-state = "keep";
 124                 };
 125                 voice {
 126                         label = "fritz7320:green:fon";
 127                         gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
 128                 };
 129                 dect {
 130                         label = "fritz7320:green:dect";
 131                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 132                 };
 133                 wlan: wlan {
 134                         label = "fritz7320:green:wlan";
 135                         gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
 136                 };
 137                 info_green: info_green {
 138                         label = "fritz7320:green:info";
 139                         gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
 140                 };
 141                 info_red {
 142                         label = "fritz7320:red:info";
 143                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
 144                 };
 145         };
 146 };
 147
 148 &pci0 {
 149         status = "okay";
 150         req-mask = <0xf>;
 151         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 152
 153         wifi@0,0 {
 154                 compatible = "pci0,0";
 155                 reg = <0x7000 0 0 0 0>;
 156                 qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */
 157         };
 158 };