6 model = "TDW8970 - TP-LINK TD-W8970";
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
13 reg = <0x0 0x4000000>;
17 gpio: pinmux@E100B10 {
18 pinctrl-names = "default";
19 pinctrl-0 = <&state_default>;
21 state_default: pinmux {
23 lantiq,groups = "mdio";
24 lantiq,function = "mdio";
27 lantiq,groups = "gphy0 led1", "gphy1 led1";
28 lantiq,function = "gphy";
30 lantiq,open-drain = <0>;
36 lantiq,open-drain = <0>;
41 lantiq,open-drain = <1>;
45 lantiq,pins = "io10", "io17", "io18", "io21";
46 lantiq,open-drain = <0>;
60 compatible = "lantiq,xrx200-net";
61 reg = < 0xE108000 0x3000 /* switch */
62 0xE10B100 0x70 /* mdio */
63 0xE10B1D8 0x30 /* mii */
64 0xE10B308 0x30 /* pmac */
66 interrupt-parent = <&icu0>;
70 compatible = "lantiq,xrx200-pdi";
74 mac-address = [ 00 11 22 33 44 55 ];
77 compatible = "lantiq,xrx200-pdi-port";
81 // gpios = <&gpio 42 1>;
84 compatible = "lantiq,xrx200-pdi-port";
90 compatible = "lantiq,xrx200-pdi-port";
93 phy-handle = <&phy11>;
96 compatible = "lantiq,xrx200-pdi-port";
99 phy-handle = <&phy13>;
104 #address-cells = <1>;
106 compatible = "lantiq,xrx200-mdio";
107 phy0: ethernet-phy@0 {
109 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
111 phy5: ethernet-phy@5 {
113 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
115 phy11: ethernet-phy@11 {
117 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
119 phy13: ethernet-phy@13 {
121 compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
128 gpios = <&gpio 33 0>;
129 lantiq,portmask = <0x3>;
134 compatible = "lantiq,phy-xrx200";
135 firmware = "lantiq/vr9_phy11g_a2x.bin";
140 compatible = "lantiq,pcie-xway";
144 #address-cells = <1>;
147 compatible = "spi-gpio";
149 gpio-miso = <&gpio 16 0>;
150 gpio-mosi = <&gpio 17 0>;
151 gpio-sck = <&gpio 18 0>;
152 num-chipselects = <1>;
153 cs-gpios = <&gpio 10 1>;
156 #address-cells = <1>;
158 compatible = "en25q64", "m25p80";
160 linux,modalias = "en25q64";
161 spi-max-frequency = <1000000>;
170 reg = <0x20000 0x7a0000>;
175 reg = <0x7c0000 0x10000>;
180 ath9k_cal: partition@7d0000 {
181 reg = <0x7d0000 0x30000>;
182 label = "boardconfig";
189 compatible = "ath9k,eeprom";
190 ath,eep-flash = <&ath9k_cal 0x21000>;
195 compatible = "gpio-keys-polled";
196 #address-cells = <1>;
198 poll-interval = <100>;
202 linux,code = <0x100>;
209 linux,input-type = <5>; /* EV_SW */
214 gpios = <&gpio 39 1>;
215 linux,code = <0x211>;
220 compatible = "gpio-leds";
232 gpios = <&gpio 19 0>;
236 gpios = <&gpio 20 0>;
240 gpios = <&gpio 37 0>;