target/linux/lantiq/dts/VGV7510KW22.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
   8         };
   9
  10         aliases {
  11                 led-boot = &power_green;
  12                 led-failsafe = &power_red;
  13                 led-running = &power_green;
  14
  15                 led-dsl = &dsl;
  16                 led-internet = &internet_green;
  17                 led-wifi = &wifi;
  18         };
  19
  20         sram@1F000000 {
  21                 vmmc@107000 {
  22                         status = "okay";
  23                         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
  24                                          &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
  25                                          &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
  26                 };
  27         };
  28
  29         memory@0 {
  30                 reg = <0x0 0x4000000>;
  31         };
  32
  33         fpi@10000000 {
  34                 localbus@0 {
  35                         nor-boot@0 {
  36                                 compatible = "lantiq,nor";
  37                                 bank-width = <2>;
  38                                 reg = <0 0x0 0x1000000>;
  39                                 #address-cells = <1>;
  40                                 #size-cells = <1>;
  41
  42                                 partitions {
  43                                         compatible = "fixed-partitions";
  44                                         #address-cells = <1>;
  45                                         #size-cells = <1>;
  46
  47                                         boardconfig: partition@fe0000 {
  48                                                 label = "board_config";
  49                                                 reg = <0xfe0000 0x20000>;
  50                                                 read-only;
  51                                         };
  52                                 };
  53                         };
  54                 };
  55
  56                 gpio: pinmux@E100B10 {
  57                         pinctrl-names = "default";
  58                         pinctrl-0 = <&state_default>;
  59
  60                         state_default: pinmux {
  61                                 gphy-leds {
  62                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  63                                                         "gphy1 led0", "gphy1 led1";
  64                                         lantiq,function = "gphy";
  65                                         lantiq,open-drain = <0>;
  66                                         lantiq,pull = <2>;
  67                                         lantiq,output = <1>;
  68                                 };
  69                                 mdio {
  70                                         lantiq,groups = "mdio";
  71                                         lantiq,function = "mdio";
  72                                 };
  73                                 pci-rst {
  74                                         lantiq,pins = "io21";
  75                                         lantiq,open-drain = <0>;
  76                                         lantiq,pull = <0>;
  77                                         lantiq,output = <1>;
  78                                 };
  79                         };
  80                 };
  81
  82                 ifxhcd@E101000 {
  83                         status = "okay";
  84                         gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
  85                 };
  86
  87                 pcie@d900000 {
  88                         status = "disabled";
  89                 };
  90         };
  91
  92         gphy-xrx200 {
  93                 compatible = "lantiq,phy-xrx200";
  94                 firmware1 = "lantiq/vr9_phy22f_a1x.bin";        /*VR9 1.1*/
  95                 firmware2 = "lantiq/vr9_phy22f_a2x.bin";        /*VR9 1.2*/
  96                 phys = [ 00 01 ];
  97         };
  98
  99         gpio-keys-polled {
 100                 compatible = "gpio-keys-polled";
 101                 #address-cells = <1>;
 102                 #size-cells = <0>;
 103                 poll-interval = <100>;
 104
 105                 reset {
 106                         label = "reset";
 107                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
 108                         linux,code = <KEY_RESTART>;
 109                 };
 110
 111                 wps {
 112                         label = "wps";
 113                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 114                         linux,code = <KEY_WPS_BUTTON>;
 115                 };
 116         };
 117
 118         gpio-leds {
 119                 compatible = "gpio-leds";
 120
 121                 dsl: dsl {
 122                         label = "vgv7510kw22:green:dsl";
 123                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
 124                 };
 125
 126                 internet_red {
 127                         label = "vgv7510kw22:red:internet";
 128                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 129                 };
 130
 131                 info_red {
 132                         label = "vgv7510kw22:red:info";
 133                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
 134                 };
 135
 136                 power_green: power {
 137                         label = "vgv7510kw22:green:power";
 138                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 139                         default-state = "keep";
 140                 };
 141
 142                 info_green {
 143                         label = "vgv7510kw22:green:info";
 144                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 145                 };
 146
 147                 internet_green: internet_green {
 148                         label = "vgv7510kw22:green:internet";
 149                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 150                 };
 151
 152                 wifi: wifi {
 153                         label = "vgv7510kw22:green:wlan";
 154                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
 155                 };
 156
 157                 power_red: power2 {
 158                         label = "vgv7510kw22:red:power";
 159                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 160                 };
 161
 162                 phone {
 163                         label = "vgv7510kw22:green:telefon";
 164                         gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
 165                 };
 166         };
 167 };
 168
 169 &pci0 {
 170         status = "okay";
 171         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 172
 173         wifi@1814,3592 {
 174                 compatible = "pci1814,3592";
 175                 reg = <0x7000 0 0 0 0>;
 176                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 177                 ralink,mtd-eeprom-swap;
 178                 mtd-mac-address = <&boardconfig 0x16>;
 179                 mtd-mac-address-increment = <1>;
 180         };
 181 };
 182
 183 &eth0 {
 184         lan: interface@0 {
 185                 compatible = "lantiq,xrx200-pdi";
 186                 #address-cells = <1>;
 187                 #size-cells = <0>;
 188                 reg = <0>;
 189                 mtd-mac-address = <&boardconfig 0x16>;
 190                 lantiq,switch;
 191
 192                 ethernet@0 {
 193                         compatible = "lantiq,xrx200-pdi-port";
 194                         reg = <0>;
 195                         phy-mode = "mii";
 196                         phy-handle = <&phy1>;
 197                 };
 198                 ethernet@2 {
 199                         compatible = "lantiq,xrx200-pdi-port";
 200                         reg = <2>;
 201                         phy-mode = "mii";
 202                         phy-handle = <&phy11>;
 203                 };
 204                 ethernet@3 {
 205                         compatible = "lantiq,xrx200-pdi-port";
 206                         reg = <3>;
 207                         phy-mode = "mii";
 208                         phy-handle = <&phy12>;
 209                 };
 210                 ethernet@4 {
 211                         compatible = "lantiq,xrx200-pdi-port";
 212                         reg = <4>;
 213                         phy-mode = "mii";
 214                         phy-handle = <&phy13>;
 215                 };
 216                 ethernet@5 {
 217                         compatible = "lantiq,xrx200-pdi-port";
 218                         reg = <5>;
 219                         phy-mode = "mii";
 220                         phy-handle = <&phy14>;
 221                 };
 222         };
 223
 224         mdio@0 {
 225                 #address-cells = <1>;
 226                 #size-cells = <0>;
 227                 compatible = "lantiq,xrx200-mdio";
 228
 229                 phy1: ethernet-phy@1 {
 230                         reg = <0x1>;
 231                         compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22";
 232                 };
 233
 234                 phy11: ethernet-phy@11 {
 235                         reg = <0x11>;
 236                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 237                 };
 238                 phy12: ethernet-phy@12 {
 239                         reg = <0x12>;
 240                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 241                 };
 242                 phy13: ethernet-phy@13 {
 243                         reg = <0x13>;
 244                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 245                 };
 246                 phy14: ethernet-phy@14 {
 247                         reg = <0x14>;
 248                         compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22";
 249                 };
 250         };
 251 };