target/linux/lantiq/dts/VGV7519.dtsi

   1 #include "vr9.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         chosen {
   7                 bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1";
   8         };
   9
  10         aliases {
  11                 led-boot = &power_green;
  12                 led-failsafe = &power_red;
  13                 led-running = &power_green;
  14
  15                 led-dsl = &broadband_green;
  16                 led-internet = &internet_green;
  17                 led-wifi = &wireless_green;
  18         };
  19
  20         sram@1F000000 {
  21                 vmmc@107000 {
  22                         status = "okay";
  23                         gpios = <&gpio 30 GPIO_ACTIVE_HIGH  //fxs relay
  24                                  &gpio 31 GPIO_ACTIVE_HIGH  //still unknown
  25                                  &gpio 3  GPIO_ACTIVE_HIGH>; //reset_slic?
  26                 };
  27         };
  28
  29         memory@0 {
  30                 reg = <0x0 0x4000000>;
  31         };
  32
  33         fpi@10000000 {
  34                 localbus@0 {
  35                         nor-boot@0 {
  36                                 compatible = "lantiq,nor";
  37                                 bank-width = <2>;
  38                                 reg = <0 0x0 0x800000>, <1 0x800000 0x800000>;
  39                                 #address-cells = <1>;
  40                                 #size-cells = <1>;
  41
  42                                 partitions {
  43                                         compatible = "fixed-partitions";
  44                                         #address-cells = <1>;
  45                                         #size-cells = <1>;
  46
  47                                         boardconfig: partition@40000 {
  48                                                 label = "board_config";
  49                                                 reg = <0x40000 0x10000>;
  50                                                 read-only;
  51                                         };
  52                                 };
  53                         };
  54                 };
  55
  56                 gpio: pinmux@E100B10 {
  57                         pinctrl-names = "default";
  58                         pinctrl-0 = <&state_default>;
  59
  60                         state_default: pinmux {
  61                                 stp {
  62                                         lantiq,groups = "stp";
  63                                         lantiq,function = "stp";
  64                                         lantiq,open-drain = <0>;
  65                                         lantiq,output = <1>;
  66                                         lantiq,pull = <0>;
  67                                 };
  68                                 mdio {
  69                                         lantiq,groups = "mdio";
  70                                         lantiq,function = "mdio";
  71                                 };
  72                                 pci-rst {
  73                                         lantiq,pins = "io21";
  74                                         lantiq,open-drain = <0>;
  75                                         lantiq,pull = <0>;
  76                                         lantiq,output = <1>;
  77                                 };
  78                                 gphy-leds {
  79                                         lantiq,groups = "gphy0 led1", "gphy1 led0";
  80                                         lantiq,function = "gphy";
  81                                         lantiq,open-drain = <0>;
  82                                         lantiq,pull = <0>;
  83                                         lantiq,output = <1>;
  84                                 };
  85                         };
  86                 };
  87
  88                 stp: stp@E100BB0 {
  89                         compatible = "lantiq,gpio-stp-xway";
  90                         reg = <0xE100BB0 0x40>;
  91                         #gpio-cells = <2>;
  92                         gpio-controller;
  93
  94                         lantiq,shadow = <0xffff>;
  95                         lantiq,groups = <0x3>;
  96                         lantiq,dsl = <0x0>;
  97                         lantiq,phy1 = <0x0>;
  98                         lantiq,phy2 = <0x0>;
  99                         /* lantiq,rising; */
 100                 };
 101
 102                 ifxhcd@E101000 {
 103                         status = "okay";
 104                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 105                         lantiq,portmask = <0x3>;
 106                 };
 107
 108                 ifxhcd@E106000 {
 109                         status = "okay";
 110                         gpios = <&gpio 32 GPIO_ACTIVE_HIGH>;
 111                 };
 112
 113                 pcie@d900000 {
 114                         status = "disabled";
 115                 };
 116         };
 117
 118         gphy-xrx200 {
 119                 compatible = "lantiq,phy-xrx200";
 120                 firmware1 = "lantiq/vr9_phy11g_a1x.bin";        /*VR9 1.1*/
 121                 firmware2 = "lantiq/vr9_phy11g_a2x.bin";        /*VR9 1.2*/
 122                 phys = [ 00 01 ];
 123         };
 124
 125         gpio-keys-polled {
 126                 compatible = "gpio-keys-polled";
 127                 #address-cells = <1>;
 128                 #size-cells = <0>;
 129                 poll-interval = <100>;
 130                 reset {
 131                         label = "reset";
 132                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
 133                         linux,code = <KEY_RESTART>;
 134                 };
 135                 eco {
 136                         label = "eco";
 137                         gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
 138                         linux,code = <BTN_0>;
 139                 };
 140                 rfkill {
 141                         label = "rfkill";
 142                         gpios = <&gpio 45 GPIO_ACTIVE_LOW>;
 143                         linux,code = <KEY_RFKILL>;
 144                 };
 145                 wps {
 146                         label = "wps";
 147                         gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
 148                         linux,code = <KEY_WPS_BUTTON>;
 149                 };
 150         };
 151
 152         gpio-leds {
 153                 compatible = "gpio-leds";
 154
 155                 eco {
 156                         label = "vgv7519:blue:eco";
 157                         gpios = <&stp 2 GPIO_ACTIVE_LOW>;
 158                 };
 159                 wps_red {
 160                         label = "vgv7519:red:wps";
 161                         gpios = <&stp 3 GPIO_ACTIVE_LOW>;
 162                 };
 163                 wps_green {
 164                         label = "vgv7519:green:wps";
 165                         gpios = <&stp 4 GPIO_ACTIVE_LOW>;
 166                 };
 167                 upgrade {
 168                         label = "vgv7519:blue:upgrade";
 169                         gpios = <&stp 5 GPIO_ACTIVE_LOW>;
 170                 };
 171                 tv {
 172                         label = "vgv7519:green:tv";
 173                         gpios = <&stp 6 GPIO_ACTIVE_LOW>;
 174                 };
 175                 internet_green: internet_green {
 176                         label = "vgv7519:green:internet";
 177                         gpios = <&stp 7 GPIO_ACTIVE_LOW>;
 178                 };
 179                 internet_red {
 180                         label = "vgv7519:red:internet";
 181                         gpios = <&stp 8 GPIO_ACTIVE_LOW>;
 182                 };
 183                 broadband_red {
 184                         label = "vgv7519:red:broadband";
 185                         gpios = <&stp 9 GPIO_ACTIVE_LOW>;
 186                 };
 187                 broadband_green: broadband_green {
 188                         label = "vgv7519:green:broadband";
 189                         gpios = <&stp 10 GPIO_ACTIVE_LOW>;
 190                 };
 191                 voice {
 192                         label = "vgv7519:green:voice";
 193                         gpios = <&stp 11 GPIO_ACTIVE_LOW>;
 194                 };
 195                 wireless_red {
 196                         label = "vgv7519:red:wireless";
 197                         gpios = <&stp 12 GPIO_ACTIVE_LOW>;
 198                 };
 199                 wireless_green: wireless_green {
 200                         label = "vgv7519:green:wireless";
 201                         gpios = <&stp 13 GPIO_ACTIVE_LOW>;
 202                 };
 203                 power_green: power2 {
 204                         label = "vgv7519:green:power";
 205                         gpios = <&stp 14 GPIO_ACTIVE_LOW>;
 206                         default-state = "keep";
 207                 };
 208                 power_red: power {
 209                         label = "vgv7519:red:power";
 210                         gpios = <&stp 15 GPIO_ACTIVE_LOW>;
 211                 };
 212         };
 213 };
 214
 215 &pci0 {
 216         status = "okay";
 217         gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
 218
 219         wifi@1814,3091 {
 220                 compatible = "pci1814,3091";
 221                 reg = <0x7000 0 0 0 0>;
 222                 ralink,mtd-eeprom = <&boardconfig 0x410>;
 223                 ralink,mtd-eeprom-swap;
 224                 mtd-mac-address = <&boardconfig 0x16>;
 225                 mtd-mac-address-increment = <1>;
 226         };
 227 };
 228
 229 &eth0 {
 230         lan: interface@0 {
 231                 compatible = "lantiq,xrx200-pdi";
 232                 #address-cells = <1>;
 233                 #size-cells = <0>;
 234                 reg = <0>;
 235                 mtd-mac-address = <&boardconfig 0x16>;
 236                 mtd-mac-address-increment = <1>;
 237                 lantiq,switch;
 238
 239                 ethernet@0 {
 240                         compatible = "lantiq,xrx200-pdi-port";
 241                         reg = <0>;
 242                         phy-mode = "rgmii";
 243                         phy-handle = <&phy0>;
 244                 };
 245                 ethernet@1 {
 246                         compatible = "lantiq,xrx200-pdi-port";
 247                         reg = <1>;
 248                         phy-mode = "rgmii";
 249                         phy-handle = <&phy1>;
 250                 };
 251                 ethernet@2 {
 252                         compatible = "lantiq,xrx200-pdi-port";
 253                         reg = <2>;
 254                         phy-mode = "gmii";
 255                         phy-handle = <&phy11>;
 256                 };
 257                 ethernet@4 {
 258                         compatible = "lantiq,xrx200-pdi-port";
 259                         reg = <4>;
 260                         phy-mode = "gmii";
 261                         phy-handle = <&phy13>;
 262                 };
 263                 ethernet@5 {
 264                         compatible = "lantiq,xrx200-pdi-port";
 265                         reg = <5>;
 266                         phy-mode = "rgmii";
 267                         phy-handle = <&phy5>;
 268                 };
 269         };
 270
 271         mdio@0 {
 272                 #address-cells = <1>;
 273                 #size-cells = <0>;
 274                 compatible = "lantiq,xrx200-mdio";
 275                 phy0: ethernet-phy@0 {
 276                         reg = <0x0>;
 277                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 278                 };
 279                 phy1: ethernet-phy@1 {
 280                         reg = <0x1>;
 281                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 282                 };
 283                 phy5: ethernet-phy@5 {
 284                         reg = <0x5>;
 285                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 286                 };
 287                 phy11: ethernet-phy@11 {
 288                         reg = <0x11>;
 289                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 290                 };
 291                 phy13: ethernet-phy@13 {
 292                         reg = <0x13>;
 293                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 294                 };
 295         };
 296 };