e3611c226c89681b46f0e410e02f4e2a29f76de9
[lede.git] / target / linux / ramips / dts / CS-QR10.dts
1 /dts-v1/;
2
3 #include "mt7620a.dtsi"
4
5 #include <dt-bindings/input/input.h>
6
7 / {
8         compatible = "ralink,mt7620a-soc";
9         model = "Planex CS-QR10";
10
11         sound {
12                 compatible = "mediatek,mt7620-audio-wm8960";
13                 model = "mt7620-wm8960";
14                 i2s-controller = <&i2s>;
15                 audio-routing =
16                         "Ext Spk", "SPK_LP",
17                         "Ext Spk", "SPK_LN",
18                         "Ext Spk", "SPK_RP",
19                         "Ext Spk", "SPK_RN";
20         };
21
22         gpio-leds {
23                 compatible = "gpio-leds";
24
25                 power {
26                         label = "cs-qr10:red:power";
27                         gpios = <&gpio1 4 1>;
28                 };
29         };
30
31         gpio-keys-polled {
32                 compatible = "gpio-keys-polled";
33                 #address-cells = <1>;
34                 #size-cells = <0>;
35                 poll-interval = <20>;
36
37                 s1 {
38                         label = "reset";
39                         gpios = <&gpio1 1 1>;
40                         linux,code = <KEY_RESTART>;
41                 };
42
43                 s2 {
44                         label = "wps";
45                         gpios = <&gpio1 3 1>;
46                         linux,code = <KEY_WPS_BUTTON>;
47                 };
48         };
49 };
50
51 &gpio0 {
52         status = "okay";
53 };
54
55 &gpio1 {
56         status = "okay";
57 };
58
59 &gpio2 {
60         status = "okay";
61 };
62
63 &gpio3 {
64         status = "okay";
65 };
66
67 &i2c {
68         status = "okay";
69 };
70
71 &i2s {
72         status = "okay";
73         pinctrl-names = "default";
74         pinctrl-0 = <&pcm_i2s_pins>;
75 };
76
77 &spi0 {
78         status = "okay";
79
80         m25p80@0 {
81                 #address-cells = <1>;
82                 #size-cells = <1>;
83                 compatible = "jedec,spi-nor";
84                 reg = <0>;
85                 spi-max-frequency = <10000000>;
86
87                 partition@0 {
88                         label = "u-boot";
89                         reg = <0x0 0x30000>;
90                         read-only;
91                 };
92
93                 partition@30000 {
94                         label = "u-boot-env";
95                         reg = <0x30000 0x10000>;
96                         read-only;
97                 };
98
99                 factory: partition@40000 {
100                         label = "factory";
101                         reg = <0x40000 0x10000>;
102                         read-only;
103                 };
104
105                 partition@50000 {
106                         label = "firmware";
107                         reg = <0x50000 0x7b0000>;
108                 };
109         };
110 };
111
112 &pcm {
113         status = "okay";
114 };
115
116 &gdma {
117         status = "okay";
118 };
119
120 &pinctrl {
121         state_default: pinctrl0 {
122                 gpio {
123                         ralink,group = "spi refclk", "rgmii1";
124                         ralink,function = "gpio";
125                 };
126                 wdt {
127                         ralink,group = "wdt";
128                         ralink,function = "wdt refclk";
129                 };
130         };
131 };
132
133 &ethernet {
134         pinctrl-names = "default";
135         pinctrl-0 = <&ephy_pins>;
136         mtd-mac-address = <&factory 0x4>;
137         mediatek,portmap = "llllw";
138 };
139
140 &gsw {
141         ralink,port4 = "ephy";
142 };
143
144 &sdhci {
145         status = "okay";
146 };
147
148 &ehci {
149         status = "okay";
150 };
151
152 &ohci {
153         status = "okay";
154 };
155
156 &wmac {
157         ralink,mtd-eeprom = <&factory 0>;
158 };
159
160 &pcie {
161         status = "okay";
162 };